BATTERY DRIVE, FTP-608 Series
2” HIGH SPEED THERMAL PRINTER
FTP-628 MCL101/103, Easy Loading Method
■ OVERVIEW
The easy loading FTP-608 MCL Series is ultra compact high
speed, battery driven thermal printer, printing on 2-inch wide
paper (58mm) where platens are removable. Our original
platen removal mechanism improved paper loading and
maintenance.
The FTP-608 MCL series can be used for a variety of
applications, such as portable terminals, POS, ticket issuing
terminals, label printers, banking terminals, and
measurement and medical equipment.
■ HIGHLIGHTS
• Easy loading type
Our original platen removal mechanism improved paper
loading and maintenance.
• Ultra compact
Height 15.5 mm, width 70.3 mm, depth 33.0 mm for the 2
inch model.
•
High speed printing
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• High resolution printing
8 dots/mm of resolution printing is possible.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL101/103
■ SPECIFICATIONS
Specification
Item
FTP-628MCL101/103
Interface
Conforms to RS232C / Centronics
4.2 VDC to 8.5 V, average current 0.87A (0.93),peak value
Printing ratio: 12.5%, printing speed 50mm/sec. at 7.2 V
For print head
Operating
Voltage
For motor
4.2 VDC to 8.5 V, 1 A maximum
5 VDC ± 5%, 0.1 A maximum
70.3 x 33.0 x 15.5 mm (WxDxH)
69.3 x 52 x 15mm (WxDxH)
Approximately 42g
For logic
Printer mechanism
Interface board
Printer mechanism
Interface board
Dimensions
Weight
Approximately 20g
Pulse resistance: 100 million pulses/dot (under our standard
conditions). Abrasion resistance: paper traveling distance
50km (print ratio: 25% or less)
Head life
Operating temperature*
Operating humidity
Storage temperature
Storage humidity
0˚ C to +50˚ C
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
High sensitive paper:
TF50KS-E4 (Nippon Paper)
TK50KS-E (Nippon Paper)
PD150R (Oji Paper)
Standard paper:
FTP-020P0701 (58mm)
TK60KS-F1 (Nippon Paper)
FTP-020P0102 (58mm)
Medium life storage paper: PD170R (Oji Paper)
Recommended thermal sensitive paper
AFP220VBB-1 (Mitsubishi
Paper)
PD160R-N (Oji Paper)
AFP-235 (Mitsubishi Paper)
TP50KJ-R (Nippon Paper)
HA112AA (Nippon Paper)
Long life storage paper:
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL101/103
■ FUNCTION
Item
Item
8. Mark detection function
9. MCU operation abnormality detection
1. Test print function
2. Paper out detection
3. Paper near end detection
10. Power ON/OFF sequence protection
11. Motor over-current protection
12. Hardware timer
Thermal head temperature abnormality
detection
4.
5. Blow-out fuse detection
6. Head voltage abnormality detection
7. Motor power saving function
■ DIMENSIONS
1. Printer mechanism: 2- inch
FTP-628MCL103
FTP-628MCL101
center of paper
center of paper
58.0
58.0
24(paper end sensor)
24(paper and sensor)
10.7
10.7
15.5
15.5
4.6
62.2
64.7
65.6±0.1
66.7
62.2
64.7
65.6±0.1
4.6
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Dimension listed in ( ) is for reference
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL101/103
■ DIMENSIONS
2. Interface board
Unit: mm
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL101/103
■ PRINTER CONNECTOR (FLEXIBLE PT BOARD) PIN ARRAYS
FTP-628 MCL101/103
Thermal head, control circuit side connector: 52610-3090 Molex or equivalent product
No
1
Signal
I/O Contents
PHK
—
I
Cathode for photo interruptor
2
VSEN
PHE
paper sensor power
3
O
Emittor for photo interruptor
4
N.C. (101)/ SW1 (103) —/I Platen release switch
N.C. (101)/ SW2 (103) —/I Platen release switch
5
6
VH
—
—
I
Head drive power
7
VH
8
DIN
CLK
Data in
9
I
Synchronous clock for communication
10 GND
11 GND
12 STB6
13 STB5
14 STB4
15 VDD
16 TH
—
—
I
Ground power supply for thermal head
Thermal head energizing control signal
I
I
I
Logic power
O
O
I
Thermally sensitive resistor input termnial 1
Thermally sensitive resistor input termnial 2
17 TH
18 STB3
19 STB2
20 STB1
21 GND
22 GND
23 LAT
24 DO
I
Thermal head energizing control signal
I
—
—
I
Ground power supply for thermal head
Data latch
Data out
O
I
25 VH
Power supply for thermal head
26 VH
I
27 MT/A
28 MT/A
29 MT/B
30 MT/B
I
I
Stepping motor excitation signal
I
I
Do not plug or unplug the FPC when power is on.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL101/103
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/15/2004.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|