8x8 DVI Matrix
EXT-DVI-848
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
2
3
4
5
6
7
8
9
Introduction
Operation Notes
Features
8x8 DVI Matrix Front Panel Layout
8x8 DVI Matrix Front Panel Descriptions
8x8 DVI Matrix Back Panel Layout
8x8 DVI Matrix Back Panel Descriptions
EXT-RMT-Matrix-848 Panel Layout
EXT-RMT-Matrix-848 Panel Descriptions
10 Connecting And Operating The 8x8 DVI Matrix
11 8x8 DVI Matrix Remote Description & Operation
12 RMT-16-IR IR Channel Configuration
13 EXT-RMT-Matrix-848 Remote Operation
14 RMT-8-IR IR Channel Configuration
15 RS-232 Serial Control Interface
16 Network Cable Wiring Diagram
17 Appendix A
19 Appendix B
24 Specifications
25 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Congratulations on your purchase of the 8x8 DVI Matrix. Your complete
satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen 8x8 DVI Matrix
Now you can easily combine eight cross-platform computers and eight digital
displays without networking. Our 8x8 DVI Matrix provides a simple, reliable and
highly effective method of creating multiple computer workstations, with each
workstation capable of accessing any one of the computers or sources at any
time by remote control. You also have the option of setting up the eight stations
locally or extending them with a Gefen extender.
How It Works
The 8x8 Matrix has eight DVI inputs and eight DVI outputs. You simply connect
your eight computer DVI ports to the 8x8 Matrix inputs, then connect your eight
DVI displays to the 8x8 Matrix outputs.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 8X8 DVI MATRIX
•
•
8x8 DVI Matrix is not HDCP compliant
By default, EDID routing is based on the first connected display to a source.
For example, if monitor A is the first display to connect to source 1 its EDID
will be used. All other displays that connect to source 1 thereafter will have
its EDID ignored. If display 1 switches to another source a hot-plug will be
sent and the EDID from the next display that is connected, in numerical
order, will be used.
•
•
The Status Output display will only list the current display/source routing.
There is no internal scaling in the 8x8 DVI Matrix. All of the attached
monitors must be able to display the resolutions output by the source
devices. For maximum compatibility it is recommended that only one
compatible/common resolution be used by all of the source devices.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Features
•
Increases your productivity by providing you with access to eight computers
from eight workstations
•
Maintains beautiful, sharp HDTV resolutions up to 1080p, 2K, and
1920x1200
•
•
Discrete IR remote control included
Long-distance remote control at distances of up to 330 feet using optional
wired CAT5 cabled remotes
•
Serial RS232 port for remote control via computer or a control automation
device such as Crestron
•
•
Supports DDWG standards for DVI monitors
Not HDCP compliant; for computer use only.
Package Includes
(1) 8x8 DVI Matrix
(1) RMT-16IR IR Remote Control
(1) 24V DC Power Supply
(8) 6-foot DVI cables
(1) Rack Ears
(1) User’s Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
8X8 DVI MATRIX FRONT PANEL LAYOUT
Download from Www.Somanuals.com. All Manuals Search And Download.
8X8 DVI MATRIX FRONT PANEL DESCRIPTIONS
1
LED Status Display
This display will list the current display/source routes.
Monitor (A~H)
Selected Source (1~8)
Monitor Output’s are labeled 1 through 8 on the rear panel of the 8x8 DVI
Matrix. These numbers correspond to the letters A through H on the LED Status
Display. The top row of letters will remain static while each input number below
will represent which source each of the displays are currently viewing.
2
3
IR Receiver
Use the included RMT-16 IR remote control to route video to the different
displays.
Power LED Indicator
This input indicator will become active once the included 24V DC power adapter
has been properly connected.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
8X8 DVI MATRIX BACK PANEL LAYOUT
6
Download from Www.Somanuals.com. All Manuals Search And Download.
8X8 DVI MATRIX BACK PANEL DESCRIPTIONS
1-8
9
Optional Remote Switching Ports
Ports 1 through 8 are used for remote switching using the optional
component EXT-RMT-MATRIX-848.
RS-232 Serial Control Interface
This port is used for serial communication for multiple functions. Access to
certain features are only through the RS-232 interface.
10-17
18-25
DVI Input Ports
Connect up to 8 DVI sources to DVI Input Ports 1 through 8.
DVI Output Ports
Connect up to 8 DVI displays to DVI Output Ports 1 through 8. These
output ports correspond to Monitors A through H on the LED Status
Display.
26
24V DC Power Input
Connect the included 24V DC power supply to this input.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
EXT-RMT-MATRIX-848 PANEL LAYOUT
Front Panel
1
2
3
Back Panel
4
5
6
(PRODUCT SOLD SEPARATELY)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EXT-RMT-MATRIX-848 PANEL DESCRIPTIONS
1
Direct Select Buttons
When this unit is attached to a CAT-5 port that corresponds to a display on
the 8x8 DVI Matrix, use buttons 1 through 8 to select what source that display
will be viewing. Buttons 1 through 8 directly correspond to DVI source inputs 1
through 8 on the 8x8 DVI Matrix.
2
3
4
5
6
IR Receiver
This port will receive commands from an RMT-8-IR remote control for remote
controlled switching at the extended location.
Active Input LED Indicator
1 through 8 LED indicators that will visually acknowledge which source is
currently selected.
CAT-5 Input Port
Connect a CAT-5 cable between this port and the remote switching ports (Item 1
through 8 on page ##) for remote switching.
IR Extension Eye
Connect the optional IR Receiver Extension (part# EXT-RMT-EXTIR) to this
port.
RS-232 Serial Control Port
This port can be used to control switching via RS-232 serial communication.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING AND OPERATING THE 8X8 DVI MATRIX
How to Connect the 8x8 DVI Matrix
1. Connect up to 8 DVI sources to the DVI Input ports on the 8x8 DVI Matrix
using the supplied DVI cables.
2. Connect up to 8 DVI displays to the DVI Output ports on the 8x8 DVI Matrix
using user supplied DVI cables.
3. Optionally connect up to 8 remote switching units (Part# EXT-RMT-MATRIX-
848) to the RJ-45 Input ports on the rear panel on the 8x8 DVI Matrix using
user supplied CAT-5, CAT-5e or CAT-6.
NOTE: Maximum extension of the EXT-RMT-MATRIX-848 units are 330 Feet
(500 Meters).
Operating the 8x8 DVI Matrix
There are 2 main ways to control the 8x8 DVI Matrix. Local and remote control.
Local control is done using the included RMT-16-IR remote control. Remote
control is done using the optional EXT-RMT-MATRIX-848 switching units.
Local Control
To control the unit locally, please use the included RMT-16-IR remote control.
Please see page## for usage information.
Remote control
To control the unit remotely, please use the EXT-RMT-MATRIX-848 remote
switcher. Each remote switcher has 8 direct select push-buttons that correspond
to DVI inputs 1 through 8. Press the push-button corresponding to the desired
source for viewing. There is also the option to use RS-232 switching via the RS-
232 port located on the rear panel of the EXT-RMT-MATRIX-848.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
8X8 DVI MATRIX REMOTE DESCRIPTION & OPERATION
Buttons 1 through 8 on the RMT-16 IR remote control correspond to display outputs
A through H. Buttons 9 through 16 correspond to source inputs 1 through 8. Please
use the steps and chart below for instructions on how to route video sources to
displays.
Output
Remote Button
Input
Remote Button
Display
Source
1
2
3
4
5
6
7
8
A
B
C
D
E
F
9
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
G
H
Routing video to a particular display using the remote control is a 2 step process.
The first input step is to select the display (Output column). The second input step is
to select the source (Input column) that will be routed to the display that was chosen
in the first step. The example below shows how to route input source number 7 to
display C.
1. Press the remote button labeled 4 (display) on the RMT-16 IR remote control.
2. Press the remote button labeled 15 (source) on the RMT-16 IR remote control.
3. The video from DVI Input 7 should now appear on the display connected to
monitor output C.
Repeat these steps to route any video source to any display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RMT-16-IR IR CHANNEL CONFIGURATION
The RMT-16-IR remote control has 4 discrete channels for use if the default IR
code set conflicts with other remote control commands in your setup. There are 2
DIP Switches underneath the battery on the RMT-16-IR remote control. These DIP
Switches must match the IR channel in use on the 8x8 DVI Matrix. The underside
of the 8x8 DVI has multiple banks of DIP Switches. Please see the diagram of the
8x8 DVI Matrix below for the correct bank and DIP Switches that are used for IR
channel configuration. Information on the remaining DIP Switch banks can be found
in Appendix A. See below for DIP Switch configurations for each of the available
remote channels.
8x8 DVI Matrix DIP Switches
RMT-16-IR DIP Switches
IR CHANNEL CONFIGURATION
RMT-16-IR REMOTE CONTROL
8x8 DVI Matrix
Remote Channel 1:
Default
Remote Channel 1:
Default
Remote Channel 2:
Remote Channel 2:
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
Remote Channel 3:
Remote Channel 3:
Remote Channel 4:
Remote Channel 4:
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EXT-RMT-MATRIX-848 REMOTE OPERATION
(PRODUCT SOLD SEPARATELY)
Once the EXT-RMT-MATRIX-848 Remote is installed and connected to a remote
output port on the 8x8 DVI Matrix, use the direct selection buttons to chose a
source to view. Once a source is chosen, its corresponding LED should become
active. Optionally, switching can be done using an RMT-8-IR remote control (sold
separately) or through the RS-232 serial communications port on the rear panel.
LED Indicator
Input Selection
Buttons
(REMOTE SOLD SEPARATELY)
The RMT-8-IR remote control can be used to select the source that will be displayed
on the monitor connected to the EXT-RMT-MATRIX-848.
RMT-8-IR Button
DVI Source
1
2
3
4
1
2
3
4
5
6
7
8
5
6
7
8
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RMT-8-IR IR CHANNEL CONFIGURATION
The RMT-8-IR remote control (sold separately) has 4 discrete IR channels for use if
the default IR code set conflicts with other remote control commands in your setup.
There are 2 DIP Switches underneath the battery on the RMT-8-IR remote control
that must match DIP Switches on the EXT-RMT-MATRIX-848. There are 4 DIP
Switches located on the underside of the EXT-RMT-MATRIX-848. DIP Switches 1
and 2 on the EXT-RMT-MATRIX-848 correspond to DIP Switches 1 and 2 on the
RMT-8-IR remote control. See below for DIP Switch configuration of each of the
available remote channels.
RMT-8-IR DIP Switches
RMT-8-IR REMOTE CONTROL
Remote Channel 1:
Default
Remote Channel 2:
1
1
2
2
1
1
2
2
Remote Channel 3:
Remote Channel 4:
EXT-RMT-MATRIX-848
Remote Channel 1:
Default
Remote Channel 2:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Remote Channel 3:
Remote Channel 4:
14
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 SERIAL CONTROL INTERFACE
1 2 3 4 5
1 2 3 4 5
6 7 8 9
6 7 8 9
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
RS232 Settings
Bits per second ................................................................................................. 19200
Data bits .................................................................................................................... 8
Parity .................................................................................................................. None
Stop bits .....................................................................................................................1
Flow Control ....................................................................................................... None
Please see Appendix B for information on the available RS-232 commands.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK CABLE WIRING DIAGRAM
Gefen has specifically engineered their products to work with the TIA/EIA-568-B
specification. Please adhere to the table below when field terminating cable for
use with Gefen products. Failure to do so may produce unexpected results and
reduced performance.
Pin
1
Color
Orange / White
Orange
2
3
Green / White
Blue
4
5
6
7
8
Blue / White
Green
Brown / White
Brown
1 2 3 4 5 6 7 8
CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types.
Gefen recommends using solid core cabling. CAT-6 cable is also recommended
for best results.
Each cable run must be one continuous run from one end to the other. No splices
or use of punch down blocks.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A
The 8X8 DVI Matrix has 4 banks of DIP Switches located on the underside of the
main unit. This section will outline the function of each DIP Switch bank.
DIP SWITCH BANKS
Front Panel
Bank A
Bank B
Bank C
Bank D
Rear Panel
DIP Switch Bank
Description
A
B
C
D
•
•
•
•
RMT-16-IR channel configuration
Monitor pre-emphasis
For future implementation
For future implementation
DIP SWITCH BANK A
DIP Switch
Description
RMT-16-IR remote control channel configuration. This
setting must match DIP Switch 1 on the RMT-16-IR remote
control.
1
2
RMT-16-IR remote control channel configuration. This
setting must match DIP Switch 2 on the RMT-16-IR remote
control.
3
4
5
6
7
8
NOT USED
NOT USED
NOT USED
NOT USED
NOT USED
For future implementation
17
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A
DIP SWITCH BANK B
DIP Switch Monitor
Description
1
2
3
4
5
6
7
8
A
B
C
D
E
F
[OFF] 0 db pre-emphasis, [ON] 6 db pre-emphasis
[OFF] 0 db pre-emphasis, [ON] 6 db pre-emphasis
[OFF] 0 db pre-emphasis, [ON] 6 db pre-emphasis
[OFF] 0 db pre-emphasis, [ON] 6 db pre-emphasis
[OFF] 0 db pre-emphasis, [ON] 6 db pre-emphasis
[OFF] 0 db pre-emphasis, [ON] 6 db pre-emphasis
[OFF] 0 db pre-emphasis, [ON] 6 db pre-emphasis
[OFF] 0 db pre-emphasis, [ON] 6 db pre-emphasis
G
H
DIP SWITCH BANK C
DIP Switch Input
Description
For future implementation
For future implementation
For future implementation
For future implementation
For future implementation
For future implementation
For future implementation
For future implementation
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
DIP SWITCH BANK D
DIP Switch Monitor
Description
For future implementation
For future implementation
For future implementation
For future implementation
For future implementation
For future implementation
For future implementation
For future implementation
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
18
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX B
The 8X8 DVI Matrix uses RS-232 serial communication for access to a number
of features. Please us this section for EDID storing, calling, and routing functions.
REMOTE FUNCTION
The remote functions are used to modify the setting of the product, such as: Input
to output routing, EDID memory management etc. These functions are available
only by the serial communications port.
Modify By Shortcut
Switching Command
First character indicates the output monitor. Second character indicates the input
number.
Example: ‘A5’ routes input 5 to output monitor A
Matrix Status Command
The ‘M’ or ‘m’ command will return the current routing state.
Shortcut Routing Command
This command sets the matrix routing state according to a preset routing state.
First character is ‘S’ or ‘s’, second character indicates the state that is set by
function #PSASRS or #MSASRS (please see page##)
Setting Function Menu
The ‘P’ or ‘p’ command will return the settings function menu.
Modify By Function
The syntax for each function is always the same. The ‘#” character is the start
flag followed by the function name in capital letter and a space. The space tells
the MCU that the function name is ending. Finally, the parameters required for
each function are separated by a space and ending by the ‘\r’ character or “Enter”
Example: #FunctionName_param1_param2_param3_param4…\r
RMT-16-IR Address
This function set the remote channel that must match the GEFEN RMT-16-IR
remote control.
#RMT_param1\r
Parameter
1
Value
[0:3]
19
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX B
DS EDID Store In Locals Edid
This function reads EDID file from DS and store it in any input Locals EDID.
#EDIDDSTOLO_param1_param2[_param3][_param4][_param5] [_param6]
[_param7][_param8][_param9]\r
Parameter
1
Name
MONITOR
INPUT
Value
[A:H]
[1:8]
2 (3-9 optionally)
DS EDID Store In EDID Bank
This function reads EDID file from DS and store it in EDID bank.
#EDIDDSTOBA_param1_param2\r
Parameter
Name
Value
[A:H]
[1:7]
1
2
MONITOR
EDID bank offset
EDID From Bank Store In Locals EDID
This function reads an EDID file from the EDID bank and stores it in any Input’s
local EDID.
#EDIDBATOLO_param1_param2[_param3][_param4][_param5][_param6]
[_param7][_param8][_param9]\r
Parameter
1
Name
EDID bank offset
INPUT
Value
[1:7]
[1:8]
2 (3-9 optionally)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX B
Route Input DDC To Local EDID
This function routes the Input DDC to the Local EDID.
#DDCTOLO_param1\r
Parameter
1
Name
Value
[1:8]
INPUT
Print DS EDID
This function reads the DS EDID file and sends it to the serial port.
#PRDSEDID_param1_param2\r
Parameter
1
Name
Value
[A:H]
0
MONITOR
Send BIN file
Send TXT file
2
1
Print Local EDID
This function reads the Input Local EDID file and sends it to the serial port.
#PRLOEDID_param1_param2\r
Parameter
1
Name
Value
[1:8]
0
INPUT
Send BIN file
Send TXT file
2
1
Print EDID Bank
This function reads the EDID file from the EDID bank and send it to the serial
port.
#PRBAEDID_param1_param2\r
Parameter
1
Name
Value
[1:7]
0
EDID bank offset
Send BIN file
Send TXT file
2
1
21
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX B
Print EDID Setting
This function sends the EDID setting table to the serial port.
#PRSEEDID\r
Load EDID To Locals EDID
These functions will load an EDID file through the serial port and store it in any
Input’s Local EDID.
#LOEDIDTOLO_param1_param2_param3[_param4][_param5][_param6]
[_param7][_param8][_param9][_param10]\r
Parameter
1
Name
Value
Semi echo mode
Full echo mode
0
1
EDID.bin file (256 bytes)
EDID.bin file (256 bytes)
INPUT
1
2
2
3 (4-10 optionally)
[1:8]
Load EDID To EDID Bank
This function loads and EDID through the serial port and store it in the EDID
bank.
#LOEDIDTOBA_param1_param2\r
Parameter
1
Name
Value
Semi echo mode
0
1
Full echo mode
EDID.bin file (256 bytes)
EDID.bin file (256 bytes)
EDID bank offset
1
2
3
2
[1:7]
Set Output Pre Emphasis
This function will set output Pre Emphasis in db.
#PE_param1_param2\r
Parameter
Name
Value
1
2
MONITOR
[A:H]
Pre Emp level [db]
[0,2,4,6]
22
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX B
Set Default Setting
This function will set the product back to its default setting.
1. Routing state will be INPUT1-MONA, INPUT2-MONB, …,
2. All the features with default to how the hardware switches are set.
#DEF\r
Set Preset Routing State
This function enables the user to determine up to 10 routing states to save in
memory.
#PSASRS_param1_param2_param3_param4_param5_param6_param7_
param8_param9\r
Parameter
Name
Value
[0:9]
[1:8]
[1:8]
[1:8]
[1:8]
[1:8]
[1:8]
[1:8]
[1:8]
1
2
3
4
5
6
7
8
9
Routing state
Input route to MONITOR A
Input route to MONITOR B
Input route to MONITOR C
Input route to MONITOR D
Input route to MONITOR E
Input route to MONITOR F
Input route to MONITOR G
Input route to MONITOR H
Set Current Matrix As Routing State
#MSASRS_param1\r
Parameter
1
Name
Value
[0:9]
Routing state
Print Routing State Table
#PRRS\r
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Video Amplifier Bandwidth ................................................... 165 MHz per channel
Single Link Range .............................................. 1080p (HDTV) / 1920x1200 (PC)
Input Video Signal .............................................................................. 1.2 Volts p-p
Input DDC Signal ......................................................................... 5 Volts p-p (TTL)
Remote Control Ports .................................. One RS232 female, One mini-stereo
Rack mountable ............................................... 2U rack space, rack ears included
DVI Connector ................................................... DVI-I 29 Pin Female (digital only)
Power Supply ............................................................................................ 24V DC
Power Consumption ....................................................................... 60 Watts (max)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|