24v driveN, reCeiPt PriNter MiNi uNit
2” high sPeed therMal PriNter uNit
FTP-627USL431/631
Overview
The FTP-627 USL Series are 24V driven high-speed
printers with a ultra low profile auto cutter and long life. The
FTP-627 USL Series can be used for a variety of applica
tions, such as POS terminals, mini Kiosks, banking terminals,
and measurement and medical equipment.
Features
•
Ultra low profile
Height 145 mm, width 105 mm, depth 120 mm
•
•
Windows®2000/XP, Linux, and OPOS drivers
FTP-627USL431/631
High speed printing
It can print at 100 mm/s (or 150 mm/s) maximum by using
Fujitsu's unique head drive control.
•
•
Auto Cutter
Long life and high reliable guilotine with dedicated motor.
Easy paper setting
Our lever platen release mechanism allows a wide paper
route, so 83mm diameter paper can be easily inserted.
•
Multifunctional die-cast frame
Wide operating temperature range, long continuous printing,
high ESD absorbtion and discharge of static electricity
vibration and shock resistant.
•
•
Barcodes
Prints standard, extended and 2-D types
RoHS compliant
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL431/631
sPeCiFiCatiONs
Item
Specification
Part Number
Interface
FTP-627USL431/435
Conforms to USB / Serial
FTP-627USL631/635
24 VDC average current, 0.5A (0.9A peak)
(print ratio: 12.5%, print speed: 100mm/sec.)
24 VDC ±5%, 0.8 A maximum
For print head
Power
For motor
supply
For cutter
24 VDC ±5%, 1.1 A maximum
For logic
5 VDC ±5%, 0.2 A maximum
Dimensions Mechnism and board
101 x 114 x 139mm (WxDxH)
Weight
Mechnism and board
Approximately 600g
Pulse resistance: 100 million pulses/dot (under out standard
conditions); Abrasion resistance: paper traveling distance
50km (print ratio: 12.5% or less) 100km (print ratio: 12.5% or less)
Head
Life
Cutter
500,000 cuts (20 cuts/minute)
5,000 (open/close)
3,000 hours
1,000,000 cuts
Platen
Mechanism
Circuit board
MTBF
500, 000 hours
Operating temperature* 0˚C to 50˚C
Operating humidity 20 to 85% RH (no condensation)
-20˚C TO +60˚C (paper not included)
Operating
environment Storage temperature*
Storage humidity
5 to 90% RH (no condensation)
Detected by thermistor
Head temperature
detection
Detection
Paper out /mark
function
Detected by photo-interuptor
detection
Platen release
Detected by sliding switch
High Sensitive Paper
Standard Paper
TF50KS-E4 (Nippon paper)
TF60KS (Nippon paper),
FTP-020PU001 (58mm),
PD105R (Oji paper),
FTP-020P0701 (58mm)
TF60KS-F1, FTP-020P0102
(58mm), PD170R (Oji paper),
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper), AFB-235
(Mitsubishi paper), TP50KJ-
R (Nippon paper), HA220AA
(Nippon paper)
Recommended thermal sensitive
Medium Life Paper
Long Life Paper
paper
*+5˚C to +40˚C printing density assurance rance.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL431/631
FuNCtiON OF iNterFaCe bOard
Item
Item
1.
2.
3.
4.
5.
6.
7.
Test print function
8.
9.
Cutter trouble detect
Paper out detection
Motor power saving function
Paper near end detection
Platen open detection
10. Mark detection function
11. MCU operation abnormality detection
12. Power ON/OFF sequence protection
13. Motor over-current protection
14. Hardware timer
Thermal head temperature abnormality detection
Blow-out fuse detection
Head voltage abnormality detection
iNterFaCe, COMMaNd, OPtiONs
Connectors on Control Board
Name
Functions
Remarks
Note
CNꢀ +24V power supply connector Connection for +24V power supply
CN2 RS-232C connector
CN3 USB I/F connector
Connection for serial interface
Connection for USB interface
-
*2
*2
CN4
-
CN5 Cutter connector
Connection for paper cutter
Connection for operation panel
Connection for near end switch
-
CN6 Operation panel connector
CN7 Near end sensor connector
*ꢀ
*ꢀ
CN8
-
CN9 Logic power connector
CN10 Head/motor connector
Connection for +5V power Supply
Connection for thermal head & paper feed motor 2-inch, 24 pin
Note: *1: Option
*2: Depends on P/N
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL431/631
diMeNsiONs
1. FTP-627USL431/435
FTP-627 Unit Paper ø83
Unit: mm
Note: 1. The cable size and FPC are not included in this drawing.
2. Do not mount anything in the shaded area except the printer.
3. Connect to the body with 2 screws at 2 hooks.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL431/631
diMeNsiONs
1. FTP-627USL440
FTP-627 Unit Paper ø83
Unit: mm
Note: 1. The cable size and FPC are not included in this drawing.
2. Do not mount anything in the shaded area except the printer.
3. Connect to the body with 2 screws at 2 hooks.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL431/631
COMMaNds
Command
Contents
HT
LF
Moves print position to the next tab.
Line feed.
FF
Feeds forms (new page).
ESC FF
Data printing in page printing mode.
Sets reverse printing.
ECS RS
ESC US
Resets reverse printing.
ESC SP+n
ESC ! + n
Character spacing setting.
Sets print mode.
ESC $+n1+n2
ESC % + n
ESC & +y+c1+c2+x+d1to dn
ESC *+m+n1+n2+d1+dN
ESC - +n
Absolute position spacing.
External registration character specification/cancellation.
External registration character definition.
Sets bit image mode.
Undeline setting.
ESC 2
Sets 1/6 inch line feed length.
Sets the line feed length.
ESC 3+n
ESC ? + n
ESC @
External registration character deletion.
Printer initialization.
ESC A+n
Sets the space between the line.
Sets the page length by character line.
Sets the tab position.
ESC C+n
ESC D+d1+dN +NUL
ESC E+n
Highlighted printing specification/cancellation.
Feeds paper in forward direction and prints.
Print and reverse direction paper feed.
Page printing mode selection.
Frame overlay function.
ESC J+n
ESC K+n
ESC L
ESC Q+n+!+j
ESC R+n
Selects international character.
Line printing mode.
ESC S
ESC T+n
Print direction setting (only page mode).
Right Rotation 90° specification / cancellation.
ESC V+n
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL431/631
Commands continued
Command
Contents
ESC W+Xꢀ+X2+ꢀ+Y2+dXꢀ+dX2+dXꢀ+dY2
Page printing mode printing area setting.
ESC X+m+n
ESC Y+01h+ESC+x+a+m+d~
ESC Y+n1+n2
ESC a+n
Setting the turning time of the motor excitation.
Program download.
Relative position setting.
Positional alignment.
ESC c+1+n
ESC c+5+n
ESC d+n
Sets internal processing.
Panel switch enable/disable setting.
Printing and n-line feeding.
n lines reverse feed.
ESC e+n
ESC i
Full cut
ESC m
Partial cut
ECS s+n
Sets printing speed.
ECS t+n
Character code table selection.
Sets/resets upside down printing.
Flash memory delete
ESC {+n
ESC DEL+n
FS !+n
Kanji printing mode collective specification.
Kanji printing mode specification.
Kanji underline specification/cancellation.
High speed collective image printing specified.
Kanji printing mode cancellation.
External character definition.
Sets the detection functions.
Kanji code system selection.
Correction of impressed energy.
Kanji spacing setting.
FS &
FS-+n
FS *+ m+n1+n2+d1 to dn
FS .
FS 2+c1+c2+d1 to dn
FS 9+n
FS C+n
FS E+n
FS S+n+n1+n2
FS W+n
Kanji double height adn width printing specification/cancellation.
Parameter transmission.
ꢀ
FS r+n*
FS-r+n
GS!+n
Setting return parameter
Setting character size
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL431/631
Commands continued
Command
GS $ + n1 + n2
GS & +m + x + y1 + y2 + d1 to dn
GS' + m + n
Contents
Vertical absolute position specification in page printing mode.
Registered bit image definition.
Registered bit image printing.
Registered bit image definition.
Registered bit image printing.
Line feeds to the next mark.
Sets the line feed length after mark detection.
Angle setting of bar code.
GS *+x+y1+y2 +d1+dn
GS/ +m
GS <
GS A+m+n
GS B+m
GS E+n
Sets print quality.
GS H+n
HRI character printing position selection.
Left margin position setting.
Printer ID demand.
GS L+n1+n2
GS M+n
GS W + n1 + n2
GS Y +n1 + n2
Printing area width setting.
Vertical relative position specification in page printing mode (vertical direction
of characters).
G a+n
Automatic notification setting status.
Sets bar code width.
GS e+n+m
GS f + n
GS h+n
HRI character font selection.
Sets bar code height.
y) GS k+m +d1to dk + NUL
x) GS k+m+n+ d1 to dn
Bar code printing.
GS k+m+k1+k2+k3+k4+{[p1][d(1,1)] ~
[d(1,i)} ~ {[pi][d(i,1)]~[d(i,j)} [00]16
Print of 2Dcode (QR).
GS k+m+k1+k2+k3+k4+k5+d1~dn
GS k+m+k1+k2+k3+k4+k5+k6+d1~dn
GS v
Print of 2 Dcode (maxi).
Print of 2 Dcode (PDF417).
Notification of firmware version.
Sets bar code length.
GS w+n
GS (+c+m1, n2, m+fn+6 +d1~dn
Customize printer
*ꢀ: These commands are valid with FTP-627DSL600 series.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL431/631
PriNt saMPle
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: (81-3) 5449-7010
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: [email protected]
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: [email protected]
Fax: (65) 6273-3021
Email: [email protected]
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev.May 5, 2008.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|