Getting Ready
Using the Camera
• Photography
Advanced Features
• Playback
OWNER’S MANUAL
This manual will show you how to use
your FUJIFILM DIGITAL CAMERA
FinePix S5 Pro correctly.
Settings
Camera Connection
Please follow the instructions carefully.
Software
Installation
Appendices
Troubleshooting
BL00577-200(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT
Be sure to read this page before using the software.
4. Ownership.
NOTICE
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on
or in Software or Documentation. Nothing contained herein shall be
construed, expressly or implicitly, as transferring or granting any right, license,
or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM
Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,
SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE
BOUND BY THIS AGREEMENT.
FUJIFILM warrants to you that Media is free from any defect in material
and workmanship under normal use for ninety (90) days from the date
of your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing
no defect. FUJIFILM’s entire liability and your sole and exclusive
remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between
FUJIFILM Corporation (“FUJIFILM”) and you, which sets forth the terms
and conditions of the license granted for you to use the software provided
by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement
is provided by a third party supplier for its software, the provisions of such
separate agreement shall apply to the use of such third party software,
prevailing over those of this Agreement.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,
EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,
INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER
PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix CX”- which
is provided to you together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE
USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
(d) “Product” means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine
executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in violation
of any export control laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM
may immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party without
FUJIFILM’s prior written consent. You also shall not sublicense,
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior
written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not
copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.
You also shall not alter or remove copyright and other proprietary
notices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
EC Declaration of Conformity
We
Name:
Address:
Fuji Photo Film (Europe) GmbH
Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the product
Product Name:
Manufacturer’s Name:
FUJIFILM DIGITAL CAMERA FinePix S5 Pro
FUJIFILM Corporation
Manufacturer’s Address: 26-30, Nishiazabu 2-chome, Minato-ku,
Tokyo 106-8620, Japan
conforms to the following Standards:
Safety:EN60065
EMC: EN55022: 1998 Classe B
EN55024: 1998
EN61000-3-2: 1995 + A1: 1998 + A2: 1998
following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and
93/68/EEC) and Low Voltage Directive (73/23/EEC).
Dusseldorf, Germany
Place
January 1, 2007
Date
Signature/Managing Director
This product comes with batteries. When these are empty, you shouldn’t throw them
away but deliver them as domestic chemical refuse.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this
product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local
requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warning................................................................. 2
IMPORTANT......................................................... 3
EC Declaration of Conformity................................ 4
Disposal of Electric and Electronic Equipment in
Private Households ......................................... 5
Contents................................................................ 6
Preface.................................................................. 9
About this Manual ............................................... 11
Accessories Included .......................................... 12
Camera Parts and Features................................ 13
Example of Control Panel, Viewfinder and LCD
Monitor........................................................... 17
Taking Pictures at Default Settings .................... 47
Viewing the Images............................................ 50
Setting the camera to playback mode........ 50
Single-frame playback................................ 51
Multi-frame playback.................................. 53
Using the erase button............................... 53
Advanced Features — Photography
Focus.................................................................. 54
Focus mode ............................................... 54
AF-area mode ............................................ 55
Focus zone selection ................................. 57
Focus area selection.................................. 59
Manual focus.............................................. 60
Focus lock.................................................. 61
Getting good results with autofocus........... 63
The AF-assist illuminator............................ 64
Depth-of-field preview button ..................... 65
Release .............................................................. 66
Metering ............................................................. 68
Taking Pictures with AE Lock..................... 69
Exposure Mode .................................................. 70
Programmed auto................................... 70
Shutter-priority auto................................ 72
Aperture-priority auto.............................. 73
Manual.................................................... 74
Exposure compensation............................. 76
Flash Photography ............................................. 78
Built-in flash................................................ 78
Using the Built-in Flash .............................. 79
Synchro modes and their features ............. 82
Getting Ready
Attaching the Strap and Lens.............................. 23
Attaching the strap...................................... 23
Mounting the camera lens........................... 23
Attaching the LCD cover............................. 29
Charging the Battery ........................................... 30
Loading the Battery............................................. 32
Checking the battery charge....................... 33
Inserting Memory Cards...................................... 34
Formatting the memory card....................... 35
Turning On and Off ............................................. 36
Setting the language, date, and time .......... 36
Correcting the Date and Time............................. 39
Adjusting Viewfinder Focus................................. 40
Selecting the Language ...................................... 41
Using the Camera
Basic Operation Guide........................................ 42
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash exposure compensation.................... 84
FV lock........................................................ 85
Lenses that can be used with the built-in
Two-Button Reset............................................. 120
Non-CPU Lenses ............................................. 121
Specifying lens focal length...................... 122
Specifying maximum aperture.................. 123
flash.......................................................... 87
Nikon Speedlights that can be used ........... 88
Changing the Sensitivity Setting ( ISO)........... 92
Changing the Image Quality Setting
QUALITY)................................................ 93
Changing the Image Size Setting
RECORDING PIXELS)............................ 94
Advanced Features — Playback
Using PLAYBACK MENU................................. 126
Setting the [PLAYBACK MENU] .............. 126
PLAYBACK MENU........................................... 127
Erasing the images ( ERASE).............. 127
DPOF set frame
(
(
Adjusting Color Balance
(
PRINT ORDER (DPOF))................. 128
(TWHITE BALANCE)................................. 95
CHOOSE COLOR TEMP. ..................... 97
WB FINE TUNE..................................... 98
Preset White Balance ................................. 99
Self-Timer Mode................................................ 101
Using Auto Bracketing ...................................... 103
Using SHOOTING MENU ................................. 108
Setting the [SHOOTING MENU]............... 108
List of [SHOOTING MENU] options.......... 109
SHOOTING MENU ........................................... 111
FILM SIMULATION.............................. 111
D-RANGE ............................................ 112
COLOR ................................................ 113
TONE................................................... 113
SHARPNESS....................................... 114
COLOR SPACE................................... 114
MULTIPLE EXPOSURE ...................... 115
LIVE VIEW DISPLAY........................... 117
SHOOTING MENU RESET ................. 119
NOISE REDUCTION ........................... 119
Protecting the images ( PROTECT)..... 132
Setting automatic playback
(
SLIDE SHOW) ................................ 133
Increasing monitor brightness
LCD BRIGHTNESS) ....................... 134
Cropping the images ( CROPPING) .... 134
(
Settings
USET UP...................................................... 138
Using the [SET UP] menu........................ 138
List of [SET UP] menu options................. 139
SHOOTING......................................... 146
DISPLAY............................................. 149
ROTATE IMAGE................................. 150
HAF........................................................ 151
SEXPOSURE........................................ 154
FLASH/BKT......................................... 158
BUTTON ASSIGNMENT..................... 166
MISC. .................................................. 175
7
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
MAINTENANCE................................... 176
TIME .................................. 177
Cleaning the CCD ............................................ 204
Power Supply and Battery................................ 208
Notes on the Memory Card .............................. 211
Warning Displays ............................................. 212
Warning messages displayed in the control
panel and viewfinder ............................. 212
Warning messages displayed in the LCD
SYSTEM .............................................. 179
FORMAT .............................................179
USB MODE .........................................179
FRAME NO. ........................................180
AUTO POWER SAVE .........................181
BEEP ...................................................181
VIDEO SYSTEM .................................181
SET-UP RESET ..................................181
monitor .................................................. 214
Troubleshooting
Troubleshooting................................................ 218
Camera Connection
Connecting to a TV ........................................... 182
Connecting Camera Directly to Printer —
PictBridge Function ..................................... 183
Before connecting to a printer................... 183
Connecting to a printer.............................. 183
Specifying images for printing (PRINT WITH
DATE / PRINT WITHOUT DATE) .......... 184
Printing with DPOF setting
Specifications ................................................. 223
Explanation of Terms ..................................... 228
FUJIFILM Digital Camera Worldwide
Network..................................................... 230
Safety Notes................................................... 238
(u PRINT DPOF).................................. 185
Software Installation
Installation on a Windows PC ........................... 188
Installation on a Mac OS X ............................... 191
Connecting to a PC........................................... 194
Using FinePixViewer................................. 198
Appendices
System Expansion Option................................. 200
Accessories Guide ............................................ 202
Using Your Camera Correctly ........................... 203
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
ZTest Shots Prior to Photography
ZLiquid Crystal
For important photographs (such as weddings and
overseas trips), always take a test shot and view the
image to make sure that the camera is working normally.
• FUJIFILM Corporation cannot accept liability for any
incidental losses (such as the costs of photography or
the loss of income from photography) incurred as a
result of faults with this product.
If the LCD monitor is damaged, take particular care with
the liquid crystal in the monitor. If any of the following
situations arise, take the urgent action indicated.
• If liquid crystal comes in contact with your skin
Wipe the area with a cloth and then wash thoroughly
with soap and running water.
• If liquid crystal gets into your eye
Flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed
Flush your mouth thoroughly with water. Drink large
quantities of water and induce vomiting. Then seek
medical assistance.
ZNotes on Copyright
Images recorded using your digital camera system cannot
be used in ways that infringe copyright laws without the
consent of the owner, unless intended only for personal
use. Note that some restrictions apply to the
photographing of stage performances, entertainments
and exhibits, even when intended purely for personal use.
Users are also asked to note that the transfer of memory
cards (CompactFlash or Microdrive) containing images or
data protected under copyright laws is only permissible
within the restrictions imposed by those copyright laws.
ZTrademark Information
• CompactFlash is a trademark of SanDisk Corporation.
• IBM PC/AT is a registered trademark of International
Business Machines Corp. of the U.S.A.
• Macintosh, Power Macintosh, iMac, PowerBook, iBook
and Mac OS are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.
ZHandling Your Digital Camera
• Microsoft, Windows, and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Windows is an abbreviated term referring to the
Microsoft® Windows® Operating System.
This camera contains precision electronic components.
To ensure that images are recorded correctly, do not
subject the camera to impact or shock while an image is
being recorded.
The “Designed for Microsoft® Windows® XP” logo refers
to the camera and the driver only.
*
• Other company or product names are trademarks or
registered trademarks of the respective companies.
Continued Q
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
ZNotes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, please
note that this camera may cause interference to other
equipment in the hospital or aircraft. For details, please
check with the applicable regulations.
ZExplanation of Color Television System
NTSC: National Television System Committee, color
television telecasting specifications adopted
mainly in the U.S.A., Canada and Japan.
PAL:
Phase Alternation by Line, a color television
system adopted mainly by European countries
and China.
ZExif Print (Exif ver. 2.2)
Exif Print Format is a newly revised digital camera file
format that contains a variety of shooting information for
optimal printing.
See “Using Your Camera Correctly” (➝p.203) for more
information.
*
10
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Manual
CAUTION
Connecting Camera Directly to Printer — PictBridge Function
This mark denotes issues that may affect the
camera’s operation.
MEMO
PRINT DPOF OK?
TOTAL 9 SHEETS
:
PRINTING
CHECK
YES
CANCEL
This mark denotes points to notice in the
camera’s operation.
CANCEL
DPress MENU/OK again to download the
data to the printer and start printing the
specified frames (files) continuously.
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, briefly turn the camera off
and then on again.
MEMO
CHECK
To select [uPRINT DPOF], the DPOF settings must be
specified on FinePix S5 Pro beforehand ( p.128).
This mark denotes additional topics that
complement the basic operating procedures.
CAUTION
Disconnecting the printer
ACheck that [PRINTING] is not displayed on the
camera’s screen.
Even when [WITH DATEE] is specified in the DPOF
settings ( p.128), the date is not inserted on printers that
do not support date printing.
BTurn the camera off. Unplug the USB cable (mini-B).
CAUTION
Z4-direction (nopq) button
Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as nor o, and left or
right is shown as por q.
When pressing q:
When pressing MENU/OK:
MENU
/OK
ZNotation
In this manual, “memory card” means CompactFlash memory card (CF card)/Microdrive. Also, the messages displayed in the
LCD monitor on the camera or application software appear in square brackets([ ]).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories Included
• Rechargeable battery NP-150 (1)
• Camera body cap (1)
Fitted on the camera body
• Battery charger BC-150 (1)
• Video cable for FinePix S5 Pro (1)
(approx. 1.5 m (4.9ft.), mini-plug (3.5 mm-dia.) to pin-
plug cable)
• Shoulder strap (1)
• Eyepiece cap (1)
• USB cable (mini-B) (1)
• Accessory shoe cover (1)
Fitted on the camera body
• Synchronizing terminal cap (1)
Fitted on the camera body
• Remote release socket cap (1)
Fitted on the camera body
• CD-ROM (1)
• LCD cover (1)
Fitted on the camera body
Software for FinePix CX
• Owner’s Manual (this manual) (1)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Parts and Features
AAccessory shoe (p.91)
BBuilt-in flash (p.78)
CLens release button (p.24)
DFocus-mode selector (p.47, 54)
EFlash pop-up button (p.79)
Fd Flash sync mode button (p.82) /
Flash compensation button (p.84)
GStrap mount (p.23)
HSync terminal (p.91)
I10-pin remote terminal
JTerminal cover (p.182)
KVIDEO OUT (Video output) socket (p.182)
LDC IN (power input) socket
ML USB socket (p.183, p.194)
Continued Q
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Parts and Features
NAF-assist illuminator (p.64)/Self-timer lamp (p.101)/
Red-eye reduction lamp (p.82)
OSub-command dial
PStrap mount (p.23)
QDepth-of-field preview button (p.65)
RFUNC. Button (p.168)
SBattery cover lock release catch (p.32)
TBattery cover (p.32)
UTripod mount
14
Download from Www.Somanuals.com. All Manuals Search And Download.
VQUAL (image quality/size) button (p.93, 94)/
Reset button (p.120)
WRelease mode dial unlock button (p.66)
XWB (white balance) button (p.95-100)
YISO (ISO sensitivity) button (p.92)
ZRelease mode dial (p.66)
!Power switch (p.36)/
_Shutter button (p.49)
Illuminator switch (p.18)
#D (Exposure compensation) button (p.76)/
Reset button (p.120)
$MODE (exposure mode) button (p.70)/
Format button (p.35)
%Focal plane mark (p.60)
^Control panel (p.17)
Continued Q
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Parts and Features
&Viewfinder eyepiece cup (p.102)
(erase) button (p.53)/ Format button (p.35)
*
(BKT (bracketing) button (p.103)
)w (playback) button (p.50)
:MENU/OK button
+DISP (display)/BACK button (p.50)
{SET UP button (p.138)
}
Face zoom in button (p.52)/Help button (p.108)
LCD monitor (p.29, 134, 203)
Viewfinder (p.40)
Diopter adjustment control (p.40)
Metering selector (p.68)
AE-L/AF-L (AE / AF lock) button (p.62, p.69)
AF-ON button (p.55)
Main-command dial
Multi-selector
ENU
/OK
Focus selector lock (p.59)
Slot cover (p.34)
DISP/
ACK
ET UP
Access lamp (p.34)
AF-area mode selector (p.55)
Card slot cover latch (p.34)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of Control Panel, Viewfinder and LCD Monitor
ZControl panel
AColor temperature indicator (p.97)
BShutter speed (p.70-p.76)
Exposure compensation value (p.76)
Flash compensation value (p.84)
ISO sensitivity (p.92)
IWhite balance mode (p.95)
JNumber of available frames (p.49)
Number of shots remaining before memory
buffer fills (p.67)
PC mode indicator
Color temperature, or preset number (p.97, 99)
Number of shots in bracketing sequence (p.103)
Focal length (non-CPU lens) (p.123)
CFlash sync indicator (p.158)
DFlexible program indicator (p.71)
EExposure mode (p.70)
Preset white balance recording indicator (p.100)
K“K” (appears when memory remains for over 1000 exposures)
(p.21)
LBattery level indicator (p.33)
MFlash sync mode (p.82)
N“Beep” indicator (p.181)
FImage size (p.94)
GImage quality (p.93)
HFocus area (p.59)
OAperture (f/-number) (p.70-76)
Aperture (number of stops) (p.73, 76)
Bracketing increment (p.103)
Maximum aperture (non-CPU lens) (p.124)
PC connection indicator (p.195)
PAperture stop indicator (p.73, 76)
AF-area mode (p.56)
17
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of Control Panel, Viewfinder and LCD Monitor
RFlash compensation indicator (p.84)
SExposure compensation indicator (p.76)
TISO sensitivity indicator (p.92)
ISO auto control indicator (p.156)
UFlash value (FV) lock (p.85)
YBracketing indicator (p.103)
ZElectronic analog exposure display (p.75)
Exposure compensation (p.76)
Bracketing progress indicator (p.103)
PC connection indicator (p.195)
!GPS connection indicator (p.147)
_Multiple exposure indicator (p.116)
VImage comment indicator (p.146)
WWide-frame focus area indicator (p.58)
XBarcode data input display (p.147)
ZThe LCD Illuminator
Holding the power switch in the
position activates the control panel backlight (LCD illuminator), allowing the display to be
read in the dark. After the power switch is released, the illuminator will remain active except immediately after the shutter is
released, or when the auto power save is activated.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ZViewfinder
AFraming grid
OISO sensitivity (p.92)
(Displayed when [ON] is selected for the [GRID DISPLAY]
PNumber of available frames (p.49)
Number of shots available before memory buffer fills (p.67)
Preset white balance recording indicator (p.100)
Exposure compensation value (p.76)
Flash compensation value (p.84)
under [
DISPLAY] in the [SET UP] menu.) (p.22)
B8-mm (0.31-in.) reference circle for center-weighted metering
(p.68)
C“No memory card” warning* (p.213)
DBattery indicator* (p.33)
PC connection indicator (p.195)
QFlash-ready indicator (p.79)
RFlash value (FV) lock (p.85)
SFlash sync indicator (p.158)
ENormal-frame focus brackets (focus areas) (p.57)
FWide-frame focus brackets (focus areas) (p.57)
GFocus indicator (p.48, 54)
TAperture stop indicator (p.73, 76)
UElectronic analog exposure display (p.75)
Exposure compensation (p.76)
HMetering (p.68)
IAutoexposure (AE) lock (p.69)
JShutter speed (p.70-76)
VISO auto control indicator (p.156)
W“K” (appears when memory remains for over 1000 exposures)
(p.21)
KAperture (f/-number) (p.70-76)
Aperture (number of stops) (p.73, 76)
LExposure mode (p.70)
MFlash compensation indicator (p.84)
NExposure compensation indicator (p.76)
To not display, use the [VIEWFINDER WARNING] under [ DISPLAY] in the [SET UP] menu.
*
19
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of Control Panel, Viewfinder and LCD Monitor
ZLCD Monitor
Photo information 1
A
B
C
D
E
D-RANGE (p.112)
COLOR (p.113)
TONE (p.113)
SHARPNESS (p.114)
FILM SIMULATION
(p.111)
A B C D
Highlights can be displayed
separately for each of the
following: histogram for
brightness (all channels), red,
green, and blue color
channels, and brightness
D-RANGE
:
:
:
:
:
:
:
:
AUTO
STD
STD
STD
COLOR
TONE
SHARPPNESS
FILM SIM.
COLORR SPACE
METERING
EXPOSURRE MODE
STD
sRGB
SPOT
PROGRAM
MASTER
F
COLOR SPACE (p.114)
GMetering mode (p.68)
HExposure mode (p.70)
MIN
MAX
warning.
HGFE
A BCD
CAUTION
ALens
BFocal length
CFlash sync mode (p.82)
DIMAGE COMMENT (p.146)
Brightness warning
Overexposed area
blinks in black.
LENS
:
:
20
F3.5
38mm
-
80mm
-5.6
FOCAL LLENGTH
FLASH
COMMENT
:---
XXXXXXXXXXXXXX
:
XXXXXXXXXXXXXX
XXXXXXXX
Brightness warning
MEMO
Photo information 2
• While playing back images on the LCD monitor or when
in single-frame playback mode, press DISP/BACK to
switch the display.
When the screen display is histogram (or photo
information), press noto switch color channels (or to
display different information).
APlayback mode (p.50)
BZoom in face (p.52)
CDPOF (p.130)
DProtection (p.132)
EQuality mode (p.93)
FPresent (p.50)
GFrame number (p.180)
HSensitivity (p.92)
IDate and time (p.36)
JShutter speed (p.72)
KAperture (p.73)
A B C D E F G H
100
-
0001
N
ISO 200
• When the screen display is photo information 2, press
noseveral times to display the focus frame.
2007. 1. 20 10
1000
:
00 AM
F2.8
0
.
0
I
J
K
L M
LExposure compensation
(p.76)
MWhite balance (p.95)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ZLarge-capacity memory cards
CAUTION
When enough memory remains on the memory card to
record a thousand or more pictures at current settings, the
number of available frame will be shown in thousands,
round down to the nearest hundred (e.g., if there is room
for approximately 1,260 exposures, the exposure count
display will show 1.2K).
• When the battery is totally exhausted, the display in the
viewfinder will dim. The viewfinder display will return to
normal when a fully-charged battery is inserted.
• The LCD panel in the upper part of the viewfinder (focus
area and grid lines) will become paler at high
temperatures and will become darker and respond a
little more slowly at low temperatures. However, it will
operate normally again at normal temperatures.
• The LCD panel in the viewfinder display (where the
icons and numbers are displayed) will turn dark at high
temperatures and will respond a little more slowly at low
temperatures. However, it will operate normally again at
normal temperatures.
Continued Q
ZCamera off display
If the camera is turned off with a battery and memory card
inserted, the number of available frame will be displayed
in the control panel.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of Control Panel, Viewfinder and LCD Monitor
About advanced focusing screen display
The new advanced focusing screen display of the FinePix
S5 Pro employs the convenient Vari-Brite focus area
display system; it enables clear display of the focus
brackets at the selected focus area in the viewfinder for
easy identification. When the finder image is bright, the
focus brackets are displayed in black and when the finder
image is dark, the focus brackets are momentarily
illuminated in red. The selected focus area can be
identified easily in both bright and dark conditions with this
function. Also, the new Advanced Focusing Screen
Display allows the superimposition of grid lines. The grid
lines can be displayed by selecting [ON] for the [GRID
DISPLAY] under [
DISPLAY] in the [SET UP] menu
(➝p.150). These grids assist you in composing the frame,
in taking landscape pictures or in shifting/tilting PC-Nikkor
lenses.
Due to characteristics of the LCD used in the Vari-Brite
*
focus area display system, a thin line outside the
selected focus area may also be displayed or the entire
viewfinder may be illuminated in red under certain
conditions. These are not malfunctions.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the Strap and Lens
Attaching the strap
Mounting the camera lens
G
Attach the strap to the strap mounts on the
camera. Once you have attached both ends of
the strap, check carefully to make sure that the
strap is firmly secured.
1 Check the lens type.
R
CPU contacts of
CPU lens
The lens is fitted
with CPU signal
contacts.
G-type Nikkor
lens
(without
CPU Nikkor lens
other than G-
type
(with aperture
ring)
aperture ring)
CAUTION
MEMO
Attach the strap correctly to prevent dropping the camera.
See “Lens compatibility” (➝p.25) for details.
2 Set the Power switch to OFF to turn the
camera off (➝p.36).
3 Remove the rear lens cap and camera body
cap.
Continued Q
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the Strap and Lens
4 Position the lens in the camera’s bayonet
mount so that the mounting indexes on lens
and camera body are aligned, then twist
lens counterclockwise until it locks into
place.
Detaching lenses
Be sure the camera is off when removing or exchanging
lenses. To remove the lens, press and hold the lens release
button while turning the lens clockwise.
Mounting index
While the lens is removed from the camera, fit the camera
body cap provided onto the camera to protect the inside of the
camera and prevent soiling of the mirror and viewfinder
screen.You can also use the Nikon Body Cap.
CAUTION
• Always change the lens in an area free of dirt and dust.
• When attaching the lens, take care not to press the lens
release button.
• Take care not to mount the lens when it is at an angle
to the camera as this can damage the lens mount on the
camera.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
ZLens compatibility
G
Use a CPU lens (except IX-Nikkor) with this camera. D- or G-type AF lenses give you access to all available functions.
Types of CPU lenses and other usable lenses/accessories
R
Focus mode
Exposure mode
Metering
Camera setting
M
(with
electronic
range
AF
M
P S
A M
3D
Color
Lens/accessory
finder)
*3
*3
*3
*3
*3
Type G or D AF Nikkor *2; AF-S, AF-I Nikkor
PC-Micro Nikkor 85 mm f/2.8D *4
AF-S / AF-I Teleconverter *7
Other AF Nikkor (except lenses for F3AF)
AI-P Nikkor
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
–
✔
✔
✔
✔
–
–
–
✔
✔
✔
✔
✔
C
*5
✔
*6
✔
–
*8
*8
✔
✔
✔
✔
✔
–
✔
✔
✔
–
*9
*9
✔
✔
✔
✔
*
1
*10
✔
–
–
–
–
–
–
–
–
–
*10
✔
*13
*14
*15
✔
AI-modified, Ai, Ai-S, or Series E Nikkor *12
Medical Nikkor 120 mm f/4
Reflex Nikkor
✔
–
✔
*16
✔
–
✔
–
–
–
–
–
N
*13
*15
✔
–
–
✔
–
*5
✔
*17
PC-Nikkor
–
✔
–
✔
*8
✔
*13
*14
*15
✔
AI–type Teleconverter *18
–
✔
–
✔
n
*8
✔
*13
*14
*15
✔
TC–16AS AF Teleconverter
PB–6 Bellows Focusing Attachment *19
–
✔
–
✔
*
*8
✔
*20
–
✔
–
–
–
✔
✔
Auto extension rings (PK–series 11–A, 12, or
13;PN–11)
*8
✔
*13
–
✔
–
✔
–
*
*
*
1 IX Nikkor lenses cannot be used.
2 Vibration Reduction (VR) supported with VR lenses.
3 Spot metering meters selected focus area.
*4 The camera’s exposure metering and flash control systems do not work properly when shifting and/or tilting the lens, or when
an aperture other than the maximum aperture is used.
*5 Electronic range finder cannot be used with shifting or tilting.
25
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the Strap and Lens
6 Manual exposure mode only.
*
*7 Compatible with AF-I Nikkor lenses and with all AF-S lens except AF-S DX VR ED 18-200 mm f/3.5-5.6G; AF-S DX ED 12-
24 mm f/4G, 17-55 mm f/2.8G, 18-55 mm f/3.5-5.6G, 18-70 mm f/3.5-4.5G, and 55-200 mm f/4-5.6G; AF-S VR ED 24-120
mm f/3.5-5.6G; and AF-S ED 17-35 mm f/2.8D, 24-85 mm f/3.5-4.5G, and 28-70 mm f/2.8D.
*
8 With maximum effective aperture of f/5.6 or faster.
*9 If AF 80-200 mm f/2.8S, AF 35-70 mm f/2.8S, new-model AF 28-85 mm f/3.5-4.5S, or AF 28-85 mm f/3.5-4.5S is zoomed
in while focusing at minimum range, image on matte screen in viewfinder may not be in focus when in-focus indicator is
displayed. Focus manually using image in viewfinder as guide.
*
10With maximum aperture of f/5.6 or faster.
11Some lenses cannot be used (see following page).
*
*12Range of rotation for Ai 80-200 mm f/2.8S ED tripod mount limited by camera body. Filters cannot be exchanged while Ai
200-400 mm f/4S ED is mounted on camera.
*13If maximum aperture is specified using [NON-CPU LENS DATA] under [ MISC.] in the [SET UP] menu, aperture value
will be displayed in viewfinder and control panel.
*14Can be used only if lens focal length and maximum aperture are specified using [NON-CPU LENS DATA] under [ MISC.]
in the [SET UP] menu. Use spot or center-weighted metering if desired results are not achieved.
*15For improved precision, specify lens focal length and maximum aperture using [NON-CPU LENS DATA] under [ MISC.]
in the [SET UP] menu.
*16Can be used in manual exposure modes at shutter speeds slower than 1/125 s. If maximum aperture is specified using
[NON-CPU LENS DATA] under [ MISC.] in the [SET UP] menu, aperture value will be displayed in the viewfinder and
control panel.
*17Exposure determined by presetting lens aperture. In aperture-priority auto exposure mode, preset aperture using lens
aperture ring before performing AE lock or shifting lens. In manual exposure mode, preset aperture using lens aperture ring
and determine exposure before shifting lens.
*18Exposure compensation required when used with AI 28-85 mm f/3.5-4.5S, AI 35-105 mm f/3.5-4.5S, AI 35-135 mm f/3.5-
4.5S, or AF-S 80-200 mm f/2.8D. See teleconverter manual for details.
*
19Requires PK-12 or PK-13 auto extension ring.
*20Use preset aperture. In exposure mode A, set aperture using focusing attachment before determining exposure and taking
photograph.
• PF-4 Reprocopy Outfit requires PA-4 Camera Holder.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ZG-type Nikkor and other CPU Nikkor lens
G
The G-type Nikkor lens has no aperture ring; aperture should be selected from camera body. Unlike other CPU Nikkor lenses,
aperture does not need to be set to minimum (largest f-number).
CPU Nikkor lenses other than G-type Nikkor lens have an aperture ring. Set the lens aperture to its minimum and lock. When
R
the lens is not set to its minimum aperture setting and the power switch is turned on, “
viewfinder and the shutter cannot be released.
” blinks in the control panel and
ZWhen a non-CPU lens is attached
If lens data are specified using the [NON-CPU LENS DATA] under [ MISC.] in the [SET UP] menu, many of the features
available with CPU lenses can also be used with non-CPU lenses. If lens data are not specified, color matrix metering cannot
be used, and center-weighted metering is used when matrix metering is selected.
Non-CPU lenses can only be used in exposure modes
and , when aperture must be set using the lens aperture ring. If
the maximum aperture has not been specified using [NON-CPU LENS DATA], the camera aperture display will show the
number of stops from maximum aperture; the actual aperture value must be read off the lens aperture ring. Aperture-priority
auto will be selected automatically in exposure modes
and . The exposure-mode indicator in the control panel will blink,
and A will be displayed in the viewfinder.
Continued Q
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the Strap and Lens
ZNikkor lenses/accessories that cannot be attached to the FinePix S5 Pro
The following Nikkor lenses/accessories cannot be attached to the FinePix S5 Pro (otherwise camera body or lens may be
damaged):
• Non-AI lenses
• Lenses that require the AU-1 focusing unit (400 mm f/4.5, 600 mm f/5.6, 800 mm f/8, 1200 mm f/11)
• Fisheye (6 mm f/5.6, 8 mm f/8, OP 10 mm f/5.6)
• 21 mm f/4 (old type)
• K2 rings
• ED 180-600 mm f/8 (serial numbers 174041-174180)
• ED 360-1200 mm f/11 (serial numbers 174031-174127)
• 200-600 mm f/9.5 (serial numbers 280001-300490)
• Lenses for the F3AF (80 mm f/2.8, 200 mm f/3.5, TC-16 Teleconverter)
• PC 28 mm f/4 (serial number 180900 or earlier)
• PC 35 mm f/2.8 (serial numbers 851001-906200)
• PC 35 mm f/3.5 (old type)
• 1000 mm f/6.3 Reflex (old type)
• 1000 mm f/11 Reflex (serial numbers 142361-143000)
• 2000 mm f/11 Reflex (serial numbers 200111-200310)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the LCD cover
G
Removing the LCD cover
To prevent soiling or damage to the LCD monitor, attach
the enclosed LCD cover to the camera when you are
carrying or not using the camera.
R
1 To attach the cover, insert the projection on
the top of the cover into the matching
indentation above the camera monitor.
Hold the camera firmly and pull the bottom of the cover gently
outwards as shown above.
2 Press the bottom of the cover until it clicks
into place.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
The battery is not fully charged at shipment and must be
fully charged before being used.
CAUTION
• Always use the rechargeable battery NP-150
(included). Other brands of rechargeable
battery (including Nikon) cannot be used.
• The battery is not fully charged at shipment and must be
fully charged before being used.
ZCompatible battery
Rechargeable Battery NP-150
• Connecting the camera directly to the AC power
adapter will NOT charge the battery. Use the
designated battery charger (BC-150) to charge the
battery.
Indicator
• If the terminals of battery are soiled, it may not be
possible to charge it. Clean the battery terminals and
battery charger terminals with a clean, dry cloth.
• Charging times increase at low temperatures.
• The NP-150 gradually loses its charge even when not
used. Charge a NP-150 just before taking pictures (in
the last day or two).
Terminals
ZRechargeable battery NP-150
The NP-150 shares information with compatible devices,
enabling the battery charge state to be shown in six levels
in control panel and as a percentage displayed in
[BATTERY INFO] under [ MAINTENANCE] in the [SET
UP] menu (➝p.176), together with battery life and the
number of pictures taken since the battery was last
charged.
• Do not split or peel outer labels of the battery.
• See p.208-209 for information on the battery.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
1 Plug the battery charger BC-150 (included)
into the power outlet using the connection
cord.
G
Unplug the battery charger from the power outlet when it
is not in use.
R
MEMO
Charging a used up battery requires approx. 2 hours and
15 min.
2 Load the battery into the battery charger
BC-150 correctly as indicated by the
polarity icon to start charging.
CHARGE lamp
During charging:
Blinks
Charging completed:
Lights Steadily
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the Battery
1 Set the power switch to OFF to turn the
camera off (➝p.36).
Removing the battery
Turn the camera off before removing the battery. Replace the
terminal cover when the battery is not in use.
2 Open the battery cover.
CAUTION
Do not apply excessive force to the battery cover.
3 Load the battery as shown below.
4 Close the battery cover.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Checking the battery charge
G
• Due to the nature of the battery, the battery level
Check the battery level in the viewfinder or control panel.
indicator (
,
(blinking)) may appear early
when the camera is used in cold locations. Try warming
the battery in your pocket or a similar location before
use.
R
• Depending on the camera mode, the transition from
to
(blinking) may occur more quickly.
• See p.208-209 for information on the battery.
Control panel Viewfinder
Description
–
–
Battery fully charged.
Battery partially discharged.
Low battery. Ready fully-
charged spare battery.
Shutter-release disabled.
Change battery.
(blinks)
(blinks)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Memory Cards
Photographs are stored on CompactFlash/Microdrive
(available separately).
In this manual, “Memory card” means CompactFlash
memory card (CF card)/Microdrive.
CAUTION
Never open the slot cover while the camera is on.
This could destroy the image data or damage the memory
card itself.
3 Insert the card as shown below.
ZAvailable CompactFlash/Microdrive
The following cards have been tested and approved for
The access lamp will light for about a second.
use with the S5 Pro:
• SanDisk
Front
SDCFH
(Ultra u)
512MB, 1GB, 2GB, 4GB
1GB, 2GB, 4GB
SDCFX
(Extreme
)
• Microdrive 1GB, 2GB, 4GB, 6GB
Front
Terminals
CAUTION
Operation is not guaranteed with other makes of card. For
more details on the above cards, please contact the
manufacturer.
CAUTION
Confirm that the memory card is in the orientation shown.
Attempting to insert cards upside down or backward could
damage the camera or card. Do not use excessive force.
1 Set the power switch to OFF to turn the
camera off (➝p.36).
4 Close the slot cover.
Check the access lamp is off.
2 Turn the card slot cover latch to open the
slot cover.
Removing memory cards
Open the slot cover, press the eject
button and remove the memory
card.
Card slot cover latch
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DAfter formatting is completed, the control panel shows
Formatting the memory card
G
the number of available frames.
Formatting memory cards permanently deletes all
photographs and other data they may contain. Be
sure all data you wish to keep has been copied to another
storage device before formatting the card.
R
ATurn the camera on (➝p.36).
BPress
seconds.
blinks in the control panel and viewfinder.
and MODE simultaneously for about 2
CAUTION
Do not turn the camera off or remove the battery or
memory card until formatting is completed.
MEMO
• When
blinks, press any other button except for
and MODE to exit without formatting memory card.
• Formatting can be performed using [FORMAT] under
[
SYSTEM] in the [SET UP] menu.
CPress
and MODE again.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On and Off
Set the power switch to ON to turn the camera on.
Set the power switch to OFF to turn the camera off.
Setting the language, date, and
time
When using the camera for the first time after purchasing,
the language, date, and time are cleared. [START MENU]
screen appears, then set the language, date, and time.
1 [
] screen appears when turning the
camera on.
START MENU
/ LANG.
SET
NO
APress n, o, p, or q to select the
language.
BPress MENU/OK to confirm the setting.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Set the date and time.
3 Change the date format.
G
DATE / TIMME NOT SET
DATE / TIMME NOT SET
R
2009
2008
DD . MM .YY
MM / DD / YY 1 / 20 / 2007 10 : 00
2007
YY . MM . DD
SET
1. 1 12 : 00
AM
YY . MM . DD
AM
2006
2005
NO
SET
NO
APress por qto select Year, Month,
Day, Hour, or Minute.
APress por qto select the date format.
BPress nor oto set the format.
BPress nor oto correct the setting.
CAlways press MENU/OK after the settings
are completed.
MEMO
• Holding down nor ochanges the numbers
continuously.
• When the time displayed passes “12”, the AM/PM
setting changes.
Date format
ex. January 20, 2007
YY.MM.DD: 2007.1.20
MM/DD/YY: 1/20/2007
DD.MM.YY: 20.1.2007
Continued Q
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On and Off
MEMO
[START MENU] screen also appears when the battery
have been removed and the camera has been left for a
long period. Once the AC power adapter has been
connected or the battery has been installed for 2 days or
more, the camera settings will be retained for roughly 6
months even if both sources of power are removed.
Auto power save function
When the auto power save function is active, if the
camera is left unused for the preset time, the camera
goes to standby status (➝p.181). The viewfinder display,
the aperture and shutter speed indicators in the control
panel will turn off in standby status. To return to ready
status, press the shutter button halfway or press w.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting the Date and Time
1 Open the [SET UP] menu.
2 Display the [DATE/TIME] screen.
G
SET UP
DATE/TIME
R
BUTTON ASSSIGNMENT
MISC.
DATE//TIME
TIME DIFFFERENCE
MAINTEENANCE
TIME
SYSTEM
APress SET UP to open the [SET UP]
APress nor oto select [DATE/TIME].
menu.
BPress nor oto select [ TIME
BPress q.
See “2 Set the date and time.” (➝p.37).
].
CPress q.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Viewfinder Focus
Photographs are framed in the viewfinder. Before
shooting, make sure that the display in the viewfinder is in
clear focus.
Remove the front lens cap and rotate the diopter
adjustment control until the focus brackets are displayed
in sharp focus when the shutter button is pressed halfway.
Focus brackets
CAUTION
When operating the diopter adjustment control with your
eye to the viewfinder, be careful not to put your fingers or
fingernails in your eye.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Language
1 Open the [SET UP] menu.
2 Display the [
] screen.
G
SET UP
DATE/TIME
R
BUTTON ASSSIGNMENT
MISC.
DATE//TIME
TIME DIFFFERENCE
MAINTEENANCE
TIME
SYSTEM
APress SET UP to open the [SET UP]
APress nor oto select [
BPress q.
].
menu.
BPress nor oto select [ TIME
].
See “1 [
] screen appears when
turning the camera on.” (➝p.36).
CPress q.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Guide
This section describes the camera’s buttons and functions.
Shutter button (p.49)
Power switch (p.36)/Illuminator switch (p.18)
Press this button halfway to restore the
camera to shooting mode. Press down fully to
take a picture.
Turns the camera on and off. Illuminates the
control panel.
Accessory shoe (p.91)
Mount an external flash here.
Flash pop-up button (p.79)
Sync terminal (p.91)
To use the built-in flash, press this button
to pop-up the flash.
Use this to connect flash units that require a sync
cable.
d Flash sync mode button (p.82)
Used with the main-command dial to select
synchro mode.
Focus-mode selector (p.47, 54)
Flash compensation button (p.84)
Selects AF-S (Single-AF servo), AF-C
(Continuous-AF servo) or M (Manual) as the
focus mode.
Used with the sub-command dial to select the
flash exposure compensation value.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
QUAL (image quality/size) button (p.93,
94)
Release mode dial unlock button (p.66)
Hold down this button to move the release
mode dial.
Selects the quality and size of an image
when the image is recorded.
U
C
ISO (ISO sensitivity) button (p.92)
Release mode dial (p.66)
Used with the main-command dial to select
ISO setting.
Selects
continuous),
* (Self-timer), or
shutter release mode.
(Single-frame),
(Low speed
(High speed continuous),
(Mirror up) as the
WB (white balance) button (p.96, 97, 100)
Used with the main-command dial to select
white balance setting.
MODE (Exposure mode) button (p.70)
D (Exposure compensation) button
(p.76)
Used with the main-command dial to select
exposure mode.
: Programmed Auto
Used with the main-command dial to
select the exposure compensation
value.
: Shutter-priority Auto
: Aperture-priority Auto
: Manual
Format button (p.35)
Control panel (p.17)
Used to format the memory card inserted in the
camera. Used simultaneously with Erase
(Format) button.
Displays the information shown in the
viewfinder along with other information.
Continued Q
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Guide
Sub-command dial
10-pin remote terminal
Changes the aperture and other settings.
Used for connecting a 10-pin remote
terminal accessories.
Depth-of-field preview button (p.65)
Lens release button (p.24)
This button allows you to check the depth
of field.
Hold down this button as you
remove the lens.
FUNC. Button (p.168)
Performs FV lock in the default setting.
You can also assign preferred functions
from menu.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
BKT (bracketing) button (p.103)
(erase) button (p.53)
Used with the command dials to select auto exposure bracketing.
Select the types of auto bracketing from the [SET UP] menu before making
the settings using the button and dial.
Used to delete an image while the image
is played back.
U
Main-command dial: Sets the number of images to be shot.
Sub-command dial: Sets compensation value.
Format button (p.35)
C
Formats the media inserted in the
camera. Used simultaneously with the
MODE (format) button.
w (playback) button (p.50)
Switches playback display on and off.
DISP (display) / BACK button (p.50)
MENU/OK button
Press this button to cancel an action in the menu
screen. Pressing this button in playback mode
switches the display.
Press this button to display the [SHOOTING MENU] or
[PLAYBACK MENU], or to confirm an action in the
menu screen. See p.109 for the [SHOOTING MENU]
list.
MENU
/OK
DISP/
BACK
SET UP button (p.138)
SET UP
Press this button to display the [SET UP] screen. See
p.139 for the list of [SET UP] menu options.
Face zoom in button (p.52) / Help button (p.108)
Used to zoom (enlarge) in on a face while the image is
played back, and to display the help screen while using
menus.
Press and hold to use the function for ‘live’ view on the
LCD monitor.
Continued Q
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Guide
AE-L/AF-L (AE / AF lock) button (p.62, 69)
AF-ON button (p.55)
The exposure and focus is fixed while holding down this
button.
Same as pressing the shutter button halfway; by
pressing this button, the camera automatically
focuses to the subjects.
Diopter adjustment control (p.40)
Main-command dial
Makes the image in the viewfinder
easier to see. Set the diopter
adjustment control to the position
where the focusing area appears
sharpest.
Changes settings such as the shutter
speed.
Metering selector (p.68)
Multi-selector
Selects multi, center-weighted or
spot as the metering system.
Use this button to select menu options or
the focus area.
Focus selector lock (p.59)
AF-area mode selector (p.55)
Unlock to select the focus area using
nopqmark on the button.
Used to set the AF-area mode for focusing.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Pictures at Default Settings
This section describes how to take pictures at default
settings.
2 Adjust camera settings.
ATurn the release mode dial to
(single frame) while
pressing the release mode dial unlock button.
1 Set the power switch to ON to turn the
camera on (➝p.36).
U
BRotate the AF-area mode selector until it clicks into
place pointing to
(single-area AF).
C
MEMO
• Check the battery level (➝p.33).
• Check the number of available frames (➝p.49).
CRotate the focus-mode selector until it clicks into place
pointing to S (single-servo AF).
DRotate the metering selector to
(matrix metering).
Continued Q
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Pictures at Default Settings
3 Focus on the main subject in the center
focus bracket and press the shutter button
down halfway.
Holding the camera correctly
Hold the handgrip in your right hand and cradle the
camera body or lens with your left.
Brace your elbows against your sides and hold the
camera with both hands.
In-focus
indicator
Halfway
Focus brackets
pressed
CAUTION
• Moving the camera while shooting gives a blurred
picture (camera shake). Hold the camera steadily with
both hands.
• If the lens, flash or AF-assist illuminator is obscured by
your fingers or the strap, subjects may be out of focus
or the brightness (exposure) of your shot may be
incorrect.
In-focus indicator
l(Lights Steadily)
l(Blinks)
Description
The subject is in focus.
The camera is unable to focus using
autofocus.
MEMO
• The shutter button has a halfway point at which focus
and exposure are automatically optimized before taking
the picture by pressing fully down.
• When pressing the shutter button halfway, a lens
operation sound may be heard.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
ZNumber of available frames
4 Press the shutter button fully.
The exposure count in the control panel and viewfinder
show the number of photographs that can be stored on
the memory card.
U
C
Halfway pressed
MEMO
Fully pressed
MEMO
When the subject is not in the center focus bracket, use
focus lock to take the picture (➝p.61).
See p.226 about the standard number of available frames
for the memory card.
CAUTION
• See p.212-216 for information on warning displays. See
“Troubleshooting” (➝p.218-222) for more information.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Images
Playback your images to check them. For important
photographs, always take a test shot and view the image
to make sure that the camera is working normally.
Select the screen display.
Press DISP/BACK during playback mode to change the
screen display.
/OK
Setting the camera to playback
mode
DISP/
BACK
Press w to change to playback mode.
MENU
MEMO
When w is pressed, the last shot is played back.
Multi-frame playback
No text displayed
100-0001
100-0001
CAUTION
N
ISO 200
Still images viewable on FinePix S5 Pro
This camera will display still images recorded on FinePix
and still images (excluding some uncompressed images)
recorded on any FUJIFILM digital camera that supports
memory card. Clear playback or playback zooming may
not be possible for still images shot on cameras other
than FinePix S5 Pro.
MASTER
1 / 2 0 / 2 0 0 7 1 0 : 0 0 A M
1 0 0 0 F 2 . 8
0
.
0
MIN
MAX
Photo information 2
Photo information 1
When playing back images shot with a camera other than
FinePix S5 Pro,
a present icon appears on the screen.
MEMO
While the screen display is the photo information 1 or 2,
press noto display different information.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Single-frame playback
Press DISP/BACK to cancel playback zoom.
2 Display another part of the image.
U
Navigation screen
(Current displayed
image)
C
ZOOM UP
To select the desired image:
Press p: previous image
Press q: next image
APress w to change display mode.
Playback zoom
BPress n, o, p, or qto display another
part of the image.
1 Zoom in / Zoom out.
To zoom in an image during single-frame playback:
obutton (Zoom out)
nbutton (Zoom in)
MEMO
Press w to return to the playback zoom.
ZZoom scales
Quality mode
4256 × 2848
3024 × 2016
2304 × 1536
Max. zoom scale
Approx. 5.9×
Approx. 4.2×
Approx. 3.2×
PANNING
PANNING
Zoom bar
Press nor oto zoom in or out on an
image.
Continued Q
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Images
2 Display another part of the image.
Zoom in face
New feature for images captured with the FinePix S5 Pro.
Press the face zoom in button to zoom directly in on the
primary face captured in the image. When no face is
recognized, the image is automatically zoomed into the
center area.
Navigation screen
(Current displayed
image)
1 Zoom in on a face (faces).
ZOOM UP
APress w to change display mode.
NEXT
PANNING
BPress n, o, p, or qto display another
part of the image.
zoom bar
Zoom in on a face (faces).
MEMO
Each time the face zoom in button is pressed,
a different face from the image is zoomed in
on (can detect up to a max of 10 faces in each
image).
Press DISP/BACK to cancel the zoom in face.
MEMO
Press nor oto perform the playback zoom. Press
to back to the zoom in face.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-frame playback
Using the erase button
Multi-frame playback screen (9 frames) appears on the
screen. Select desired frame from the 9 frames.
When performing single-frame playback, use
unnecessary images to have ample free space on the
memory card.
to erase
U
ERASE OK?
C
OK
CANCEL
SET
APress n, o, p, or qto move the cursor
(colored frame) to the desired frame.
Press nor orepeatedly to jump to the
next page.
APress por qto select the frame (file) to
erase.
BPress MENU/OK to enlarge the image.
BPress
.
MEMO
Press
to display the zoom in face screen or playback
zoom screen while performing multi-frame playback.
CPress nor oto select [OK].
DPress MENU/OK to erase the frame (file)
displayed.
CAUTION
Erased frames (files) cannot be recovered.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus
This section describes the options that control how your
camera focuses: focus mode, focus-area selection, and
AF-area mode.
C (Continuous-servo AF)
Camera focuses continuously while shutter button is
pressed halfway. If subject moves, focus will be adjusted
to compensate (predictive focus tracking ➝p.55). At
default settings, photographs can be taken whether or not
camera is in focus (release priority).
Focus mode
Use the focus-mode selector to select the focus mode.
M (Manual)
Camera does not focus automatically; focus must be
adjusted manually using the lens focusing ring. If
maximum aperture of lens is f/5.6 or faster, viewfinder
focus indicator can be used to confirm focus (electronic
range finding), but photographs can be taken at any time,
whether or not camera is in focus.
S (Single-servo AF)
MEMO
Camera focuses when shutter button is pressed halfway.
Focus locks when in-focus indicator (l) appears in view
finder, and remains locked while shutter button is pressed
halfway (focus lock). At default settings, shutter can only
be released when in-focus indicator is displayed (focus
priority).
Manual focus is recommended when the camera is
unable to focus using autofocus.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
ZThe AF-ON button
For the purpose of focusing the
AF-area mode
AF-area mode determines how the focus area is selected
in autofocus mode.
camera, pressing AF-ON has the
same effect as pressing the shutter
button halfway.
Use the AF-area mode selector to select the AF-area
mode.
d
ZPredictive focus tracking
In continuous-servo AF, the camera will automatically
initiate predictive focus tracking if the subject moves while
the shutter button is pressed halfway or AF-ON is
pressed. In predictive focus tracking, the camera will track
focus while attempting to predict where the subject will be
when the shutter is released.
P
Single-area AF
User selects focus area using multi-selector; camera
focuses on subject in selected focus area only. Use for
relatively static compositions with subjects that will stay in
selected focus area.
Dynamic-area AF
User selects focus area manually, but camera uses
information from multiple focus areas to determine focus.
If subject leaves selected focus area even briefly, camera
will focus based on information from other focus areas
(focus area selected in viewfinder does not change). Use
with continuous-servo AF to follow erratically moving
subjects and in other situations in which it is difficult to
keep subject in selected focus area.
Continued Q
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus
ZAF-area mode display in the control panel
Group dynamic-AF
Single-area AF
User chooses focus area group (see below).
Dynamic-area AF
Group dynamic-AF
Top
Bottom
Left
Right
Center
Camera focuses on center of selected group; if subject
leaves focus area even briefly, camera focuses based
on information from other focus areas in same group. Use
when subject is moving erratically but place of subject in
overall composition is known.
Dynamic-area AF with closest
subject priority
Dynamic-area AF with closest subject
priority
MEMO
Camera automatically selects focus area containing
subject closest to camera. Prevents out-of-focus shots
when photographing erratically moving subjects.
• The selected focus area or group of focus areas is
shown in the control panel in single-area AF, dynamic-
area AF, and group dynamic-AF. The illustrations in the
above table show the display when the center focus
area or focus area group is selected.
• You cannot focus manually when “Dynamic-area AF
with closest subject priority” is set. The control panel
display does not show the focus area selected by the
camera and the focus area is not displayed in the
viewfinder or control panel.
MEMO
Single-area AF is automatically selected when manual
focus is used.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Wide frame (7 Areas)
Control panel
Focus zone selection
Viewfinder
When
(single-area AF) or
(dynamic-area AF) is
Single-area AF
selected for AF-area mode (➝p.55), the user can select
from normal or wide focus areas.
Normal frame (11 Areas)
Dynamic-area AF
A
User can select from eleven focus areas; camera focuses
on selected focus area. Use to focus on specific areas of
subject.
MEMO
Only the normal frame (11 areas) is available when
group dynamic-AF or dynamic-area AF with closest
subject priority is selected for AF-area mode.
Wide frame (7 Areas)
User can select from seven focus areas each covering
wide area of frame, making it easier to position subject in
focus area and reducing time needed to frame
photographs. May produce unpredictable results if focus
area contains multiple subjects.
h
Continued Q
ZThe display in the control panel and viewfinder
Focus areas are displayed in the control panel and
viewfinder as follows:
Normal frame (11 Areas)
Control panel
Viewfinder
Single-area AF
Dynamic-area AF
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus
ZSetting the focus zone in the [SET UP] menu
See “Using the [SET UP] menu” (➝p.138).
ZSetting the focus zone using FUNC. button and
sub-command dial
ASelect [FOCUS AREA FRAME] for [FUNC. BUTTON]
under [ BUTTON ASSIGNMENT] in the [SET UP]
menu (➝p.138, 168).
Select [FOCUS AREA FRAME] under [H AF] in the [SET
UP] menu.
BWhile pressing the FUNC. button, rotate the sub-
command dial.
AF
HELP
FPS
F
AF-C MODE PPRIORITY
AF-S MODE PPRIORITY
FOCUS AREEA FR
GROUP DYNNAMIC
AF LOCCK-ON
(
)
NORMAL 11 AREAS
(
)
WIDE 7 AREAS
AF ACTIVATION
R/A
[NORMAL (11 AREAS)]
Normal Frame (11 Areas)
[WIDE (7 AREAS)]
CWIDE in the control panel is displayed or hidden.
Wide Frame (7 Areas)
MEMO
When the WIDE is displayed, the wide frame (7 Areas) is
set. When the WIDE is hidden, the normal frame (11
Areas) is set.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Focus area selection
• The focus area cannot be changed when auto power
save is activated, during playback, or while a menu is
displayed.
• When the AF-area mode is set to the group dynamic-AF
(➝p.56), the focus area can be selected by group.
• When the AF-area mode is set to the dynamic-area AF
with closest subject priority (➝p.56), the focus-area
cannot be selected.
At default settings, the FinePix S5 Pro offers
a choice of eleven focus areas that together
cover a wide area of the frame. The focus
area can be selected manually, allowing
photographs to be composed the main subject positioned
almost anywhere in the frame, or automatically to ensure
that the subject closest to the camera is always in focus
regardless of where it is the frame.
d
ATurn the focus selector lock to the l position.
h
BPress nopq on the multi-selector to select focus
area. To select the center focus area (or focus area
group) at any time, press the center of the multi-
selector.
CThe focus selector lock can be rotated to the L (locked)
position following selection to prevent the selected
focus area from changing when the multi-selector is
pressed.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus
Manual focus
Focal plane mark
Use manual focus in situations where autofocus may not
work as expected (➝p.63) or a lens other than an AF
Nikkor lens is attached.
To determine the distance between your subject and the
camera, measure from the focal plane mark on the camera
body. The distance between the lens mounting flange and the
focal plane is 46.5 mm (1.83 in.).
ASet the focus-mode selector to M.
BAdjust the lens focusing ring until the image displayed
on the clear matte field in the viewfinder is in focus.
Photographs can be taken at any time, even when the
image is not in focus.
MEMO
• When using a lens that offers A-M selection, select M
when focusing manually. With lenses that support M/A
(autofocus with manual priority), focus can be adjusted
manually with the lens set to M or M/A. See the
documentation provided with your lens for details.
• Use manual focus while monitoring an image on the
LCD monitor using the live view display.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
ZFocus aid
Focus lock
This allows you to check the focus of your shot using the
focus indicator lin the viewfinder. You can use focus aid
when the lens mounted has an f-stop setting brighter than
f/5.6.
Focus lock can be used to change the composition after
focusing, making it possible to focus on a subject that will
not be in a focus area in the final composition.
It can also be used when the autofocus system is unable
to focus (➝p.63).
d
ASet the focus-mode selector to M.
BPosition the selected focus area over the object on
which you want to focus.
P
1 Focus on a subject.
APosition the subject in the selected focus area.
CTurn the focusing ring on the lens.
BPress the shutter button halfway.
Check that the in-focus indicator l appears in the
viewfinder.
DPress the shutter button down halfway. When the shot
is in focus, the focus indicator l lights.
Halfway pressed
Continued Q
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus
2 Lock the focus.
3 Move the camera to recompose while
pressing the shutter button halfway, then
press fully.
Single-servo AF
Focus will lock automatically when the in-focus
indicator appears, and remain locked until your finger
is removed from shutter button.
Continuous-servo AF
Press AE-L/AF-L to lock both focus and exposure.
Focus will remain locked while AE-L/AF-L is pressed,
even if your finger is removed from the shutter button.
Fully pressed
MEMO
• You can reapply the focus lock as many times as you
like before releasing the shutter.
• Do not change the distance between the camera and
the subject while focus lock is in effect. If the subject
moves, focus again at the new distance.
• In single-servo AF, focus will remain locked between
shots as long as the shutter button is kept pressed
halfway, allowing several photographs in succession to
be taken at the same focus setting. Focus will also
remain locked between shots while AE-L/AF-L is
pressed.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting good results with
autofocus
The focus area contains areas of
sharply contrasting brightness.
Example: subject is half in the
shade.
Autofocus does not perform well under the conditions
listed below. If the camera is unable to focus using
autofocus, use manual focus (➝p.60) or use focus lock
(➝p.61) to focus on another subject at the same distance
and then recompose the photograph.
d
The subject appears smaller than
the focus area.
Example: focus area contains
both foreground subject and
distant buildings.
There is little or no contrast
between the subject and the back
ground.
Example: subject is the same
color as the back ground.
h
The subject contains many fine
details.
Example: a field of flowers or other
subjects that are small or lack
variation in brightness.
The focus area contains objects at
different distances from the
camera.
Example: subject is inside a cage.
The subject is dominated by
regular geometric patterns.
Example: a row of windows in a
skyscraper.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus
MEMO
The AF-assist illuminator
• For the AF-assist illuminator to function correctly, the
lens must have a focal length of 24-200 mm and the
subject must be in range of the illuminator. Lens hoods
should be removed. With most lenses, the illuminator
has a range of about 0.5-3 m (1 ft. 8 in.-9 ft. 10 in.).
• AF-assist is not available with the AF-S VR ED 200-400
mm f/4G.
The built-in AF-assist illuminator enables the camera to
focus even when the subject is poorly lit. The camera
must be in focus mode S (single-servo autofocus), an AF-
Nikkor lens must be attached, and the center focus area
or focus area group must be selected or closest subject
priority in effect. If these conditions are met and the
subject is poorly lit, the illuminator will light automatically
to assist the autofocus operation when the shutter button
is pressed halfway.
ZLenses for which vignetting occurs
• Autofocus using the camera’s AF-assist illuminator
cannot be performed due to vignetting with the following
lenses at shooting distance within 0.7 m (2 ft. 4 in.):
- AF Micro ED 200 mm f/4D
- AF-S ED 28-70 mm f/2.8D
- AF-S VR ED 24-120 mm f/3.5-5.6G
- AF Micro ED 70-180 mm f/4.5-5.6D
• Autofocus using the camera’s AF-assist illuminator
cannot be performed due to vignetting with following
lenses at shooting distance within 1 m (3 ft. 3 in.):
- AF-S DX ED 55-200 mm f/4-5.6G
• Autofocus using the camera’s AF-assist illuminator
cannot be performed due to vignetting with following
lenses at shooting distance within 1.5 m (4 ft. 11 in.):
- AF-S VR ED 70-200 mm f/2.8G
CAUTION
After the AF-assist illuminator has been used for several
consecutive shots, it may turn off briefly to protect the
lamp. The illuminator can be used again after a short
pause. Note that the illuminator may become hot with
continuous use.
- AF ED 80-200 mm f/2.8D
- AF-S ED 80-200 mm f/2.8D
• Autofocus using the camera’s AF-assist illuminator
cannot be performed due to vignetting with following
lenses at shooting distance within 2.5 m (8 ft. 2 in.):
- AF VR ED 80-400 mm f/4.5-5.6D
64
Download from Www.Somanuals.com. All Manuals Search And Download.
ZNikon flash units and active assist illuminator
Depth-of-field preview button
Under the conditions described above, the Nikon SB-800
and SB-600 Speedlights and SU-800 wireless Speedlight
commander will provide active AF illumination for the
following focus areas:
To preview the effects of aperture, press and hold the
depth-of-field preview button. The lens will be stopped
down to the aperture value selected by the camera
(modes
and ) or the value chosen by the user
AF lens focal
length
Normal frame
(11 areas)
Wide frame
(7 areas)
(modes and ), allowing depth of field to be previewed
in the viewfinder.
d
24-34 mm
35-70 mm
71-105 mm
P
With other Speedlights, the camera AF-assist illuminator
will be used.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Release
The shooting operation can be selected from
(single-
Continuous high speed
frame),
(continuous low speed),
(continuous high
speed), * (self-timer), or
release mode dial.
(mirror up) using the
While shutter button is held down, camera records up to
3 frames per second.* Use to photograph moving objects
or to capture a fleeting expression on portrait subjects.
Press the release mode dial unlock button and turn the
release mode dial to the desired setting.
* Self-timer
Use the self-timer for self-portraits or to reduce blurring
caused by camera shake (➝p.101).
Mirror up
Press shutter button once to raise mirror, again to take
photograph (shutter will be released automatically if
shutter button is not pressed for 30 sec. after mirror up).
Mirror will be lowered after shutter is released.
Choose this mode to minimize camera shake in situations
in which the least camera movement can result in blurred
photographs. Note that autofocus, metering, and framing
cannot be confirmed in the viewfinder while mirror is
raised.
Single frame
Camera takes one photograph each time the shutter
button is pressed. Access lamp will light while photo is
recorded; next shot can be taken immediately if enough
space remains in memory buffer.
If the following conditions apply: Average frame rate
with continuous-servo AF, manual or shutter-priority
auto exposure, a shutter speed of 1/250s or faster, ISO
200, [100% (STD)] is selected for [ D-RANGE] in the
[SHOOTING MENU], and enough memory remains in
memory buffer.
*
Continuous low speed
While shutter button is held down, camera records 1-2
frames per second.*
MEMO
When
(continuous low speed) or
(continuous high
speed) is selected, the continuous shooting speed and
interval may be slower, depending on the setting for [
D-RANGE] in the [SHOOTING MENU].
66
Download from Www.Somanuals.com. All Manuals Search And Download.
ZBuffer Size
MEMO
• The number of images that can be stored in the memory
buffer at current settings is shown in the exposure-count
displays in the viewfinder and control panel while the
shutter button is pressed. The continuous shooting can
record up to 100 frames.
• If 0 is displayed, the memory buffer is full and shooting
will slow.
• The number of images displayed for exposure-count in
the viewfinder and control panel varies depending on
the capacity of the memory card or shooting conditions.
• See p.226 for the number of images that can be stored
in the memory buffer. The buffer size shown in the
control panel and viewfinder is an approximation only.
• In continuous mode, the orientation recorded for the
first shot applies to all photographs in the same burst,
even if camera orientation is changed during shooting.
• While photographs are being recorded to the memory
card, the access lamp next to the memory card slot will
light. Depending on the memory card type, image size
(
(
RECORDING PIXELS) or image quality
QUALITY), recording time may vary from a few
d
seconds to a few minutes. Do not remove the memory
card or disconnect the power source until the access
lamp has gone out. If the camera is switched off while
data remains in the buffer, the power will not turn off
until all images in the buffer have been recorded. If the
battery is exhausted while images remain in the buffer,
the shutter release will be disabled and the images
transferred to the memory card.
h
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Metering
Normally, the matrix metering system will provide the
optimum exposure for your shot. However, you can
choose from 3 metering modes for shots where you want
to select a different exposure level (AE lock or exposure
compensation) or for particular scenes (such as backlit
shots or shots with very strong contrast).
Center-weighted
Camera meters entire frame but assigns greatest weight
to area in center of frame 8 mm (0.31 in.) in diameter,
shown by corresponding 8-mm reference circle in
viewfinder.
Turn the metering selector to desired metering system.
MEMO
The metering diameter can be changed by the [CENTER-
WEIGHT AREA] setting under [SEXPOSURE] in the
[SET UP] menu. Also, the average metering value of the
entire frame is available (➝p.157).
Spot
Camera meters circle 3 mm (0.12 in.) in diameter
(approximately 2.0% of frame). Ensures that subject will
be correctly exposed, even when back ground is much
brighter or darker.
• Circle is centered on current focus area (in group
dynamic AF, on center focus area of current group;
➝p.56), making it possible to meter off-center subjects
(if non-CPU lens is used or if dynamic-area AF with
closest subject priority is in effect, camera will meter
center focus area).
Matrix metering
1,005-pixel RGB sensor sets exposure based on variety
of information from all areas of frame. With type G or D
lens, camera uses 3D color matrix metering II for natural
results even when frame is dominated by bright (white or
yellow) or dark (black or dark green) colors.
With other CPU lenses, 3D range information is not
included; instead, camera uses color matrix metering II.
Color matrix metering is available when a non-CPU lens
is attached and if the focal length and maximum aperture
of the lens are specified for [NON-CPU LENS DATA]
under [ MISC.] in the [SET UP] menu (➝p.121; the
center-weighted metering is used if focal length or
aperture is not specified).
MEMO
• For improved precision with non-CPU lenses, specify
lens focal length and maximum aperture in [NON-CPU
LENS DATA] under [
MISC.] in the [SET UP] menu.
• When using non-CPU lens, center-weighted metering is
used if focal length or aperture is not specified in [NON-
• For AE lock (➝p.69) or Exposure compensation
(➝p.76), the Spot metering is recommended.
CPU LENS DATA] under [
menu.
MISC.] in the [SET UP]
• Center-weighted is recommended when using filters
with an exposure factor (filter factor) over 1x.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Taking Pictures with AE Lock
• While AE lock is in effect, exposure will not be changed
by changing the frame. Also, AE-L indicator will appear
in the viewfinder.
AE lock allows you to set the exposure for a specific
subject in your shot. This technique is useful when
brightness of your subject differs greatly from its
surroundings.
• In spot metering, exposure will be locked at the value
metered in a 3-mm (0.12 in.) circle centered on the
selected focus area. In center-weighted metering,
exposure will be locked at the value metered in an 8-
mm (0.31 in.) circle at the center of the viewfinder.
• Depending on the option selected, AE-L/AF-L locks
both focus and exposure (the default setting), only
focus, or only exposure. Options are available for
keeping exposure locked until AE-L/AF-L is pressed a
second time, the shutter is released, or exposure
meters turn off.
ASet the exposure mode other than
(➝p.70).
(manual)
d
BSet the metering selector to
center-weighted or
spot metering.
Matrix metering is not recommended since the effect of
the AE lock cannot be effectively attained.
h
DKeeping AE-L/AF-L pressed, recompose the
photograph and shoot.
CPosition the focus area over the subject you want
correctly exposed, press and hold the shutter button
down halfway and then press AE-L/AF-L.
Confirm that the in focus indicator (l) appears in the
viewfinder.
MEMO
• While AE-L/AF-L is being pressed, the following
operation can be performed:
-
When exposure mode is : Flexible program (➝p.71)
- When exposure mode is : Changing Shutter speed
- When exposure is : Changing Aperture
The new shutter speed and exposure values are
displayed in the exposure display after the change.
• Rotating the metering selector to another setting does
not change the metering system during AE Lock
operation. Release the AE lock.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Exposure Mode
Four modes are available: programmed auto (P), shutter-
priority auto (S), aperture-priority auto (A), and manual
(M).
MEMO
• Programmed auto is only available with CPU lenses.
• Exposure mode
(aperture-priority auto) is
automatically selected when a non-CPU lens is
attached. The exposure-mode indicator
the control panel and A will be displayed in the
viewfinder.
• If the limits of the exposure metering system are
exceeded, one of the following indicators will be
displayed in the control panel and viewfinder:
: Subject too bright. Use optional neutral density
(ND) filter or lower ISO sensitivity.
will blink in
Programmed auto
This mode automatically controls the shutter speed and
aperture setting to give the optimum exposure for the
photography conditions. This mode is useful when you
want to be able to take pictures quickly and easily to take
advantage of snapshot opportunities.
: Subject too dark. Use flash or raise ISO sensitivity.
AWhile pressing MODE, rotate the main-command dial
until
is displayed in the control panel.
BFrame a photograph, focus, and shoot.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
ZProgram chart
Flexible program
The program chart shows exposure control in flexible
program (ISO 100).
In mode , different combinations of shutter speed and
aperture can be selected by rotating the main-command dial
(“flexible program”). All combinations produce the same
exposure. While flexible program is in effect, an asterisk (“ ”)
appears next to the exposure-mode indicator in the control
panel.
ISO 100; lens with maximum aperture of f/1.4
and minimum aperture of f/16 (e.g., AF 50 mm
f/1.4 D)
d
To restore default shutter speed and aperture settings, rotate
the main-command dial until the indicator is no longer
displayed. Default settings can also be restored by turning the
camera off , selecting another exposure mode, performing a
two-button reset (➝p.120) or change the setting for the [EV
CONTROL STEPS] under [SEXPOSURE] in the [SET UP]
menu.
F1
F1.4
F2
F2.8
F4
F5.6
F8
P
F11
F16
F22
F32
8"
30"15"
4" 2" 1"
2
4
8
15 30 60 125 250 500 1000 2000 4000 8000
• The maximum and minimum values for EV vary with
sensitivity (ISO equivalency); the above graph assumes
a sensitivity of ISO 100 equivalent.
• When matrix metering is used, values over 16 1/3 EV
are reduced to 16 1/3 EV in case of ISO 100.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Exposure Mode
MEMO
Shutter-priority auto
• Shutter-priority auto is only available with CPU lenses.
In shutter-priority auto, you choose the shutter speed
while the camera automatically selects the aperture that
will produce the optimum exposure. Shutter speed can be
set to values between 30s and 1/8000s. Use slow shutter
speeds to suggest motion by blurring moving objects,
high shutter speeds to “freeze” motion.
• Exposure mode
automatically selected when a non-CPU lens is
(aperture-priority auto) is
attached. The exposure-mode indicator
the control panel and A will be displayed in the
viewfinder.
• If you select a shutter speed of
then select mode without changing the shutter
speed, the shutter-speed display will flash and the
will blink in
in mode
and
AWhile pressing MODE, rotate the main-command dial
shutter cannot be released. Rotate the main command
dial to select a different shutter speed before shooting.
• If the limits of the exposure metering system are
exceeded, one of the following indicators will be
displayed in the control panel and viewfinder:
: Subject too bright. Choose faster shutter speed or
lower ISO sensitivity (➝p.92), or use optional neutral
density (ND) filter.
until
is displayed in the control panel.
: Subject too dark. Choose slower shutter speed or
higher ISO sensitivity (➝p.92), or use flash.
• Use a battery with sufficient power when performing
bulb shooting.
BRotate the main-command dial to choose the desired
shutter speed (between 30s and 1/8000s).
CFrame a photograph, focus, and shoot.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Aperture-priority auto
• When a non-CPU lens is attached and if the maximum
aperture of the lens has been specified in the [NON-
In this mode, the photographer sets the aperture
(minimum aperture to maximum aperture) and the
camera automatically controls the shutter speed. This
mode is best for photographs where the priority is on the
depth of field (the area where objects are in focus), such
as shots where both near and distant objects are in clear
focus (minimum apertures) or where the background is
out of focus (maximum apertures).
CPU LENS DATA] under [
MISC.] (➝p.121) in the
[SET UP] menu, the current f/-number will be displayed
in the control panel and viewfinder, rounded to the
nearest full stop. Otherwise the aperture displays will
show only the number of stops (
, with maximum
d
aperture displayed as ) and the f/-number must be
read from the lens aperture ring.
AWhile pressing MODE, rotate the main-command dial
until
is displayed in the control panel.
h
• If the limits of the exposure metering system are
exceeded, one of the following indicators will be
displayed in the control panel and viewfinder:
: Subject too bright. Choose smaller aperture
(larger f/-number) or ISO sensitivity (➝p.92), or use
optional neutral density (ND) filter.
: Subject too dark. Choose larger aperture (smaller
f/-number) or higher ISO sensitivity (➝p.92), or use
flash.
BRotate the sub-command dial to choose the desired
aperture.
• If aperture ring of CPU lens (except G type) is not set to
minimum aperture,
blinks in the control panel and
viewfinder. In this case, the shutter cannot be released
regardless of the exposure mode selected.
CFrame a photograph, focus, and shoot.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Exposure Mode
Manual
Aperture:
Use the sub-command dial to set.
In this mode, the photographer is free to set any shutter
speed (1/8000 sec. to 30 sec. or ) and aperture
setting (minimum aperture to maximum aperture). This
allows the photographer to determine the exposure to suit
the conditions and the desired effect while watching the
electronic analog exposure display in the viewfinder.
AWhile pressing MODE, rotate the main-command dial
CFrame a photograph, focus, and shoot.
until
is displayed in the control panel.
MEMO
When the shutter speed is set to
in step B, the
shutter remains open for as long as you hold the shutter
button in the down position.
BWhile checking the electronic analog exposure display,
set the shutter speed and aperture.
Either one can be set before the other.
Shutter speed:
Use the main-command dial to set.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
ZElectronic analog exposure display
[EV CONTROL STEPS] set to [1 EV STEP]
Control panel Viewfinder
At shutter speeds other than
, the electronic
analog exposure display in the control panel and
viewfinder show whether the photograph would be under-
or over exposed at current settings.
The electronic analog exposure display is displayed in the
control panel and viewfinder as below.
Optimal
exposure
Underexposed
by 1 EV
d
Overexposed
by more than
3 EV
[EV CONTROL STEPS] set to [1/3 EV STEP]
Control panel
Viewfinder
Optimal
exposure
If overexposure exceeds more than 2 EV at 1/3 EV
STEP, the electronic analog exposure display in the
viewfinder appears as this.
*
Underexposed
by 1/3 EV
h
• If the limits of the exposure metering system are
exceeded, the electronic analog exposure display will
flash for warning.
Overexposed
by more than
3 EV
*
Continued Q
[EV CONTROL STEPS] set to [1/2 EV STEP]
Control panel Viewfinder
Optimal
exposure
Underexposed
by 1/2 EV
Overexposed
by more than
3 EV
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Exposure Mode
MEMO
Exposure compensation
• At a shutter speed of
, the shutter will remain
Exposure compensation allows you to intentionally vary
the optimum exposure value controlled by the camera.
This can be useful when intentionally achieving under- or
overexposure. Use center-weighted or spot metering
because matrix metering cannot achieve sufficient effect.
Exposure compensation can be performed in any
open while the shutter button is held down. Using a
fully-charged rechargeable NP-150 battery or the
optional AC135VN adapter is recommended to prevent
loss of power while the shutter is open. If the battery is
exhausted during shooting, the camera will record the
photograph to the memory card and then turn off
automatically.
exposure mode (However in
exposure mode, only the
• When a non-CPU lens is attached and if the maximum
aperture of the lens has been specified in the [NON-
electronic analog exposure display changes—selected
shutter speed and aperture do not change).
CPU LENS DATA] under [
MISC.] (➝p.121) in the
[SET UP] menu, the current f/-number will be displayed
in the viewfinder and control panel, rounded to the
nearest full stop. Otherwise the aperture displays will
AWhile pressing the D, rotate the main-command dial
and confirm exposure compensation in the control
panel or the viewfinder (in the viewfinder, positive
show only the number of stops (
, with maximum
aperture displayed as ) and the f/-number must be
read from the lens aperture ring.
values are shown by a
icon, negative values by a
icon). Exposure compensation can be set to values
between –5 EV (underexposure) and +5 EV
(overexposure) in increments of 1/3 EV.
• When an AF Micro Nikkor lens is attached and an
external exposure meter is used, the exposure ratio
only needs to be factored when the lens aperture ring is
used to set the aperture.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
When the exposure compensation is set, D appears on
the control panel.
The compensation value can be checked by pressing the
D.
–0.3 EV
+2 EV
d
The electronic analog exposure displays is displayed as
exposure compensation in the control panel and
viewfinder. “0” blinks in electronic analog exposure
display.
BFrame a photograph, focus, and shoot.
h
MEMO
• To cancel exposure compensation, set the
compensation amount to “0.0” or perform a two-button
reset (➝p.120). (Turning the camera off does not
cancel exposure compensation.)
• Normally, you should compensate exposure to the +
side when the background is brighter than your main
subject, or to the – side when the background is darker.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Photography
Built-in flash
Standard i-TTL Flash for Digital SLR
This camera is equipped with a guide number 12 flash
(ISO 100, m/ft) that can be used not only when natural
lighting is inadequate, but also to fill in shadows and
backlit subjects or to add a catch light to the subject’s
eyes.
Flash output adjusted to bring lighting in frame to
standard level; brightness of background is not taken into
account. Recommended for shots in which main subject
is emphasized at expense of background details, or when
exposure compensation is used.
• Standard i-TTL flash for Digital SLR is activated
automatically when spot metering is selected.
i-TTL balanced Fill-Flash for Digital SLR
Speedlight emits series of nearly invisible preflashes
(monitor preflashes) immediately before main flash.
Preflashes reflected from objects in all areas of frame are
picked up by 1,005-pixel RGB sensor and are analyzed in
combination with information from matrix metering system
to adjust flash output for natural balance between main
subject and ambient background lighting.
• If type G or D lens is used, distance information is
included when calculating flash output.
• Precision of calculation can be increased for non-CPU
lenses by providing lens data (focal length and
maximum aperture; ➝p.121).
MEMO
• i-TTL flash control can adjust for ISO sensitivities
between 100 and 1600. It may not be able to adjust
flash level appropriately for ISO sensitivities over 1600.
• The flash angle of the built-in flash can cover the field of
view of an 18 mm lens. It may not be able to light the
entire subject with some lenses or apertures.
• When [ON] is selected for [ISO AUTO CONTROL]
under [ISO AUTO CONTROL] under [SEXPOSURE]
in the [SET UP] menu, ISO sensitivity will automatically
be adjusted as required for optimal flash output. This
may result in foreground subjects being underexposed
in flash photographs taken at slow shutter speeds, in
daylight, or against a bright background. In these cases,
choose a flash mode other than slow sync or select
• Not available when spot metering is used.
mode
or
and choose a larger aperture.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
CSet the flash sync mode.
(➝p.82).
Using the Built-in flash
To use the built-in flash:
AChoose a metering method.
d
DSet the exposure mode, shutter speed and aperture.
The shutter speeds and apertures available when the
built-in flash is raised (➝p.80).
ECheck that the d flash-ready indicator appears in the
viewfinder.
MEMO
P
• Select matrix or center-weighted metering to activate i-
TTL Balanced Fill-Flash for Digital SLR.
• Standard i-TTL Flash for Digital SLR is activated
automatically when spot metering is selected.
MEMO
If the d flash-ready indicator is not displayed when the
built-in flash is used, the shutter release will be disabled.
BPress the flash pop-up button. The built-in flash will
raise and begin charging.
FCompose the photograph, making sure that the subject
is within range of the flash, then focus and shoot.
Continued Q
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Photography
MEMO
ZThe shutter speeds and apertures available when
the built-in flash is raised
• If the d flash-ready indicator blinks for about three
seconds after the photograph is taken, the flash has
fired at full output and the photograph may be
underexposed. Check the results in the monitor. If the
photograph is underexposed, adjust settings and try
again.
Exposure
mode
Shutter speed
Aperture
(➝p.70)
Set automatically by
Set automatically
camera (1/250-1/60s)*1 by camera
• If the built-in flash is used in continuous shooting mode,
only one photograph will be taken each time the shutter
button is pressed.
• Vibration reduction (available with VR lenses) does not
take effect if the shutter button is pressed halfway while
the built-in flash is recharging.
• After the built-in flash has been used for several
consecutive shots, it may turn off briefly to protect the
flash. The built-in flash can be used again after a short
pause.
• The built-in flash and Nikon SB-800, SB-600, and SB-
R200 Speedlights emit a modeling flash when the
camera depth-of-field preview button is pressed.
Modeling illumination can be turned off by selecting
[OFF] for the [MODELING FLASH] (➝p.165) under [
FLASH/BKT] in the [SET UP] menu.
(➝p.72)
(➝p.73)
(➝p.74)
Value selected by user
(1/250–30 s) *2
Set automatically by
camera (1/250-1/60s) *1 user *3
Value selected by
Value selected by user
(1/250–30 s) *2
*1 Regardless of option selected, camera may set shutter
to speeds as slow as 30 s at flash sync settings of slow
sync, slow rear-curtain sync, and slow sync with red-
eye reduction.
2 Speeds faster than 1/250s will be reduced to 1/250s
when built-in flash is popped up.
*3 Flash range varies with ISO sensitivity and aperture.
Consult table of flash of flash ranges (➝p.81) when
*
setting aperture in
and
modes.
To close the built-in flash
To save battery power when the built-in flash is not in use,
return it to the closed position by pressing it lightly downward
until the latch clicks into place.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
ZEffective range of the built-in flash
The effective range of the built-in flash varies depending on the ISO sensitivity and aperture settings used.
Aperture at ISO equivalent of:
Metering range
100
1.4
2
125
1.6
2.2
3.2
4.5
6.3
9
160
1.8
2.5
3.5
5
200
2
250
2.2
3.2
4.5
6.3
9
320
2.5
3.5
5
400
2.8
4
500
3.2
4.5
6.3
9
640
3.5
5
800
4
1000 1250 1600
4.5
6.3
9
5
5.6 1-7.5m (3.3–24.6 ft.)
2.8
4
5.6
8
7.1
10
14
20
29
—
8
0.7-5.4m (2.3–17.7 ft.)
0.6-3.8m (2.0–12.5 ft.)
0.6-2.7m (2.0–8.9 ft.)
0.6-1.9m (2.0–6.2 ft.)
0.6-1.4m (2.0–4.6 ft.)
0.6-0.9m (2.0–2.9 ft.)
0.6- 0.7m (2.0–2.3ft.)
d
2.8
4
5.6
8
7.1
10
14
20
29
—
11
16
22
32
—
—
5.6
8
7.1
10
14
20
29
11
16
22
32
—
13
18
25
—
—
5.6
8
7.1
10
11
16
22
32
13
18
25
—
11
16
22
13
11
16
13
14
18
h
18
20
25
—
The minimum effective range for flash control using the built-in flash is 0.6 meters.
*
In programmed auto, the maximum aperture (minimum f/-number) is limited according to sensitivity (ISO equivalency), as
shown below:
Maximum aperture at ISO equivalent of:
100
125
160
200
250
320
400
500
640
800
1000
1250
1600
2.8
3
3.2
3.3
3.5
3.8
4
4.2
4.5
4.8
5
5.3
5.6
For each one-step increase in sensitivity (e.g., from 200 to 400), aperture is stopped down by half an f/-stop. If the maximum
aperture of the lens is smaller than given above, the maximum value for aperture will be the maximum aperture of the lens.
*
MEMO
i-TTL flash control can adjust for ISO sensitivities between 100 and 1600. It may not be able to adjust flash level appropriately for
ISO sensitivities over 1600.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Photography
Synchro modes and their
features
d Front-curtain sync
Recommended for most situations. In programmed auto
and aperture-priority auto modes, shutter speed will
automatically be set to values between 1/60 and 1/250s
(1/60 to 1/8,000s when using optional Speedlight with
auto FP high-speed sync;➝p.88).
You can select any of 5 modes to suit the type of shot and
the desired effect.
While pressing d, rotate the main command-dial until the
desired flash sync icon is displayed in the control panel.
d b Red-eye reduction
Red-eye reduction pre-flash lights for approximately one
second before main flash. Pupils in subject’s eyes to
contract, reducing “red-eye” effect sometimes caused by
flash.
• Be aware that the camera and the subjects (people) in
the shot do not move until the shutter is released.
d b SLOW Red-eye reduction with
slow sync
Combines red-eye reduction with slow sync. This mode is
only available in programmed auto and aperture-priority
auto exposure modes.
See p.78 for details of flash shooting.
• Use of tripod is recommended to prevent blurring
caused by camera shake.
CAUTION
Some lenses may block the red-eye reduction lamp,
preventing the subject from seeing the lamp and
interfering with red-eye reduction.
CAUTION
Only available in exposure modes
eye reduction) is selected in modes
and . d b (red-
and
.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
d SLOW Slow sync
d REAR Rear-curtain sync
Flash is combined with speeds as slow as 30 s to capture
both subject and background at night or under dim light.
This mode is only available in programmed auto and
aperture-priority auto exposure modes.
• Use of tripod is recommended to prevent blurring
caused by camera shake.
In shutter-priority auto or manual exposure mode, flash
fires just before the shutter closes, creating effect of a
stream of light behind moving objects. In programmed
auto and aperture-priority auto, slow rear-curtain sync is
used to capture both subject and background.
• Use of tripod is recommended to prevent blurring
caused by camera shake.
d
CAUTION
CAUTION
Only available in exposure modes
and
.
d (front-curtain sync) is selected in modes
and
.
Rear-curtain sync cannot be used with studio flash
systems, as the correct synchronization cannot be
obtained.
h
MEMO
In exposure modes
and , flash-sync
mode will be set to d SLOW REAR (slow
rear-curtain sync) when the d button is
released.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Photography
Flash exposure compensation
To release flash exposure compensation
Flash exposure compensation can be used to increase or
reduce flash output from the level chosen by the camera’s
flash control system. Flash output can be increased to
make the main subject appear brighter, or reduced to
prevent unwanted highlights or reflections.
Normal flash output can be restored by setting flash exposure
compensation to 0.0 or performing a two-button reset. Flash
exposure compensation is not reset when the camera is
turned off.
While pressing
confirm flash exposure compensation in the control panel
or viewfinder.
Flash exposure compensation can be set to values
between –3 EV (darker) and +1 EV (brighter) in
increments of 1/3 EV.
, rotate the sub-command dial and
MEMO
Flash exposure compensation is also available when a
Nikon SB-800 or SB-600 Speedlight is attached.
See p.78 for details of flash shooting.
• At values other than 0, a
icon will be displayed in
the control panel and viewfinder after you release
• As a rule of thumb, positive compensation may be
needed when the main subject is darker than the
background, negative compensation when the main
subject is brighter than the background.
.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
DPress the FUNC. button.
FV lock
This feature is used to lock flash output, allowing
photographs to be recomposed without changing the
flash level. This ensures that flash output is appropriate to
the subject even when the subject is not positioned in the
center of the frame.
A
• The flash will emit a monitor preflash to determine the
appropriate flash level.
• Flash output will be locked at this level and FV lock
ASelect [FV LOCK] or [FV LOCK/LENS DATA] for
[FUNC. BUTTON] under [ BUTTON ASSIGNMENT]
in the [SET UP] menu (➝p.138, 168).
icons (
and
) will appear in the control
BPress the flash pop-up button to raise the flash.
panel and viewfinder.
EMove the camera to recompose the photograph, then
press the shutter button fully.
P
CPosition the subject in the center of the frame and
press the shutter button halfway to focus.
If desired, additional pictures can be taken without
releasing FV lock.
FPress the FUNC. button to release FV lock and confirm
that the FV lock icons (
and
) are no longer
displayed in the control panel and viewfinder.
Continued Q
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Photography
ZUsing FV lock with Nikon Speedlights
ZUsing FV Lock with the built-in flash
FV lock is also available with SB-800, SB-600, and SB-
R200 Speedlights (available separately). In this case, set
the Speedlight to TTL mode (the SB-800 can also be used
in AA mode; see the Speedlight manual for details). While
FV lock is in effect, flash output will automatically be
adjusted for changes in Speedlight zoom head position.
When the [COMMANDER MODE d] is set for the [BUILT-
IN FLASH] (➝p.159) under [ FLASH/BKT] in the [SET
UP] menu, FV lock can be used with remote SB-800, SB-
600, or SB-R200 flash units if (a) any of the built-in flash,
flash group A, or flash group B is in TTL mode, or (b) a
flash group is composed entirely of SB-800 Speedlights in
TTL or AA mode.
When the built-in flash is used alone, FV lock is only
available If the [TTL d: TTL MODE] is set for the [BUILT-
IN FLASH] (➝p.159) under [ FLASH/BKT] in the [SET
UP] menu.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenses that can be used with the built-in flash
The built-in flash can be used with any CPU lens with a focal length of 18–300 mm. Note that the flash may be unable to light
the entire subject if the following lenses are not used at or above the minimum ranges given below:
Lens
Zoom position
18 mm
Minimum range
1.5 m/4 ft. 11 in.
1.0 m/3 ft. 3 in.
1.0 m/3 ft. 3 in.
1.0 m/3 ft. 3 in.
1.5 m/4 ft. 11 in.
1.0 m/3 ft. 3 in.
1.0 m/3 ft. 3 in.
1.5 m/4 ft. 11 in.
1.0 m/3 ft. 3 in.
1.0 m/3 ft. 3 in.
AF-S DX ED 12–24 mm f/4G
d
20 mm
AF-S ED 17–35 mm f/2.8D
24 mm
AF-S DX IF ED 17–55 mm f/2.8G
AF ED 18–35 mm f/3.5–4.5D
AF-S DX VR ED 18–200 mm f/3.5–5.6G
AF 20–35 mm f/2.8D
24 mm
18 mm
18 mm
20 mm
h
AF-S ED 28–70 mm f/2.8D
28 mm
35 mm
AF Zoom Micro Nikkor ED 70–180 mm f/4.5–5.6D
70 mm
The built-in flash can also be used with Ai-S, Ai, and Ai-modified non-CPU lenses with a focal length of 18–200 mm.
Restrictions apply to the following lenses:
• Ai 50–300 mm f/4.5, Ai-modified 50–300 mm f/4.5, and Ai-S ED 50–300 mm f/4.5: use at 135 mm and above
• Ai ED 50–300 mm f/4.5: use at 105 mm and above
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Photography
Nikon Speedlights that can be used
The Nikon flash models listed in the table below can be used with this camera.
The following features are available with the SB-800, SB-600, and SB-R200:
Speedlight
Advanced Wireless Lighting
SB-800
SB-600
SB-800
SB-600*1
SB-R200*2
Flash mode/feature
*4
*4
i-TTL*3
✔
✔
✔
✔
✔
—
—
—
✔
✔
—
—
—
✔
*6
✔
AA
Auto aperture *5
—
*6
✔
*7
✔
A
Non-TTL auto
—
—
✔
—
✔
✔
✔
✔
✔
GN
M
Range-priority manual
Manual
✔
✔
✔
✔
✔
✔
✔
✔
—
✔
*9
✔
*9
RPT
REAR
b
Repeating flash
Rear-curtain sync
Red-eye reduction
✔
—
✔
✔
✔
—
✔
—
—
—
—
Flash Color Information Communication
Auto FP High-Speed Sync*8
FV lock
*9
✔
*9
*9
✔
✔
✔
—
—
—
✔
—
—
—
✔
—
—
—
*5
✔
*5
✔
AF-assist for multi-area AF*10
Auto zoom
✔
✔
✔
✔
ISO Auto
*1 Functions as remote flash only.
*2 Cannot be mounted on camera accessory shoe. Can be used as remote flash if camera is in commander mode (➝p.159)
or SB-800 Speedlight is mounted on camera and SB-R200 is controlled by Nikon SU-800 wireless Speedlight commander.
*3 When using non-CPU lens with i-TTL Balanced Fill-Flash for Digital SLR, improved precision can be obtained if lens data
are specified in the [NON-CPU LENS DATA] (➝p.121) under [
MISC.] in the [SET UP] menu.
*4 Standard i-TTL for Digital SLR is used with spot metering or when selected with Speedlight.
*5 Not available with non-CPU lenses unless lens data have been specified in the [NON-CPU LENS DATA] (➝p.121) under
[
MISC.] in the [SET UP] menu.
*6 Use Speedlight controls to select flash mode.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
*7 Available only if non-CPU lens is used without specifying lens data in the [NON-CPU LENS DATA] (➝p.121) under [
MISC.] in the [SET UP] menu.
*8 Select [1/250(AUTO FP)] for the [FLASH SYNC SPEED] (➝p.158) under [
FLASH/BKT] in the [SET UP] menu.
Not available if built-in flash fires.
*9 Available only when SB-800 is used as master flash or Nikon SU-800 wireless Speedlight commander is used.
*10Available with AF CPU lenses only.
The following Speedlights can be used in non-TTL auto and manual modes. If they are set to TTL, the shutter button will lock
and no photographs can be taken.
A
SB-50DX, SB-23, SB-29*2
SB-21B*2, SB-29S*2
,
SB-30, SB-27*1, SB-22S,
SB-22, SB-20, SB-16B, SB-15
Speedlight
SB-80DX, SB-28DX, SB-28,
SB-26, SB-25, SB-24
Flash mode/feature
A
Non-TTL auto
Manual
✔
✔
✔
✔
—
✔
—
✔
✔
✔
—
✔
M
Repeating flash
h
REAR
Rear-curtain sync
*1 When an SB-27 is mounted on the FinePix S5 Pro, the flash mode is automatically set to TTL, and the shutter-release will
be disabled. Set the SB-27 to A (non-TTL auto flash).
*2 Autofocus is only available with AF-Micro lenses (60 mm, 105 mm, or 200 mm).
CAUTION
Flash attachments made by manufacturers other than Nikon
Use only Nikon Speedlights. Negative voltages or voltages over 250 V applied to the accessory shoe could not only prevent normal
operation, but damage the sync circuitry of the camera or flash.
Continued Q
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Photography
ZNotes on using Nikon Speedlights
• In programmed auto, the maximum aperture (minimum
f/-number) is limited according to sensitivity (ISO
equivalency), as shown below:
• Refer to the Speedlight manual for detailed instructions.
If the Speedlight supports the Creative Lighting System,
refer to the section on CLS-compatible Digital SLR
cameras. The FinePix S5 Pro is not included in the
“Digital SLR” category in the SB-80DX, SB-28DX, and
SB-50DXmanuals.
• If auto FP high-speed sync is not used, the shutter will
synchronize with an external flash at speeds of 1/250s
or slower.
• i-TTL flash control can be used at ISO sensitivities
between 100 and 1600. At values over 1600, the
desired results may not be achieved at some ranges or
aperture settings. If the flash-ready indicator d blinks for
about three seconds after a photograph is taken, the
flash has fired at full power and the photograph may be
underexposed.
• When an SB-800 or SB-600 is attached, AF-assist
illumination and red-eye reduction are performed by the
optional Speedlight. The camera provides AF-assist
illumination when other Speedlights are used (➝p.64-
65).
100
4
125
4.2
160
4.5
200
4.8
250
5
320
5.3
400
5.6
500
6
640
6.3
800
6.7
1000
7.1
1250
7.6
1600
8
For each one-step increase in sensitivity (e.g., from 200
to 400), aperture is stopped down by half an f/-stop. If the
maximum aperture of the lens is smaller than given
above, the maximum value for aperture will be the
maximum aperture of the lens.
• When an SC-series 17, 28, or 29 sync cable is used for
off-camera flash photography, correct exposure may
not be achieved in i-TTL mode. We recommend that you
choose spot metering to select standard i-TTL flash
control. Take a test shot and view the results in the
monitor.
• In i-TTL, use the flash panel or bounce adapter provided
with your Speedlight. Do not use other panels such as
diffusion panels, as this may produce incorrect
exposure.
• Auto power zoom is available only with SB-800 and SB-
600 Speedlights.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
ISO sensitivity (SB-800/SB-600)
ZThe sync terminal
When used with optional SB-800 and SB-600
A sync cable can be connected to the sync terminal as
required. Do not connect another Speedlight via a sync
cable when performing rear-curtain sync flash
photography with an SB-series Speedlights such as the
800, 600, 80DX, 28DX, 28, 50DX, 27, 23, 22s, or 29s
mounted on the camera accessory shoe.
Speedlights, i-TTL flash control can adjust for ISO
sensitivities between 100 and 1600. It may not be able to
adjust flash level appropriately for values over 1600.
When [ON] is set for the [ISO AUTO CONTROL] under
[ISO AUTO CONTROL] under [S EXPOSURE] in the
[SET UP] menu (➝p.154), ISO sensitivity will
d
automatically be adjusted as required for optimal flash
output. This may result in foreground subjects being
underexposed in flash photographs taken at slow shutter
speeds, in daylight, or against a bright background. In
these cases, choose a flash mode other than slow sync or
CAUTION
Attach the accessory shoe cover when no external flash
is attached on the accessory shoe.
select mode
or
and choose a larger aperture.
h
ZThe accessory shoe
The S5 Pro is equipped with an accessory shoe that
allows SB-series Speedlights, including the SB-800, 600,
80DX, 50DX, 28DX, 28, 27, 23, 22S, and 29S to be
mounted directly on the camera without a sync cable. The
accessory shoe is equipped with a safety lock for
Speedlights with a locking pin, such as the SB-800 and
SB-600.
CAUTION
Attach the accessory shoe cover when no external flash
is attached on the accessory shoe.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Sensitivity Setting ( ISO)
ISO sensitivity is the digital equivalent of film speed. The
higher the ISO sensitivity, the less light needed to make
an exposure, allowing higher shutter speeds or smaller
apertures.
ISO sensitivity can be set between values roughly
equivalent to ISO 100 and ISO 3200 in steps equivalent
to 1/3 EV.
ZSetting the ISO sensitivity using ISO and the main-
command dial
While pressing ISO, rotate the main-command dial until
the desired setting is displayed in the control panel or
viewfinder.
ZAvailable settings for the ISO sensitivity
100/125/160/200/250/320/400/500/640/800/1000/1250/
1600/2000/2500/3200
ZSetting the ISO sensitivity in the [SHOOTING
MENU]
Select the desired sensitivity for the [ ISO] under
[SHOOTING MENU].
See “Setting the [SHOOTING MENU]” (➝p.108).
SHOOTINNG MENU
320
ISO
250
WHITE BAALANCE
WB FINEE TUNE
QUALITY
200
160
CAUTION
125
RECORDINNG PIXELS
100
Images shot in high-sensitivity photography may appear
coarse and may also be affected by noise such as white
dots.
MEMO
When high ISO sensitivity is used for shooting, and [
RANGE] is set 130% or higher, S-Pixel will be used for the
shooting. And the volume of the image data (including
RAW image data) will be cut to approximately half.
However you can still set the dynamic-range to up to
400% for use with applications.
D-
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Image Quality Setting ( QUALITY)
The camera supports the following image quality options
(listed in descending order by image quality and file size):
ZSetting the image quality in the [SHOOTING
MENU]
Select the desired quality in the [ QUALITY] under
[SHOOTING MENU].
ZAvailable settings for the image quality
See “Setting the [SHOOTING MENU]” (➝p.108).
RAW
Recorded as CCD-RAW data.
No image processing is performed on the
camera. Select this setting when you
want to process the image on a PC.
SHOOTINNG MENU
A
ISO
RAW
WHITE BAALANCE
FINE JPG
FINE JPG
NORMAL JPG
Records images in high quality bettered
only by the [RAW] setting. This mode
allows you to record more images than
the [RAW] setting.
WB FINEE TUNE
NORMAAL JPG
QUALITY
RAW+FIINE JPG
RECORDINNG PIXE
RAW+NORMAL JPG
Allows you to record the largest number
of images.
h
ZSetting the image quality using QUAL and the
RAW+
FINE JPG
Two images are recorded: one RAW
image and one FINE JPEG image.
main-command dial
While pressing QUAL, rotate the main-command dial until
the desired setting is displayed in the control panel.
RAW+
NORMAL JPG
Two images are recorded: one RAW
image and one NORMAL JPEG image.
CAUTION
• When photographs taken at [RAW+FINE JPG] or
[RAW+NORMAL JPG] are viewed on the camera, only
the JPEG image will be displayed.
• When photographs taken at [RAW+FINE JPG] or
[RAW+NORMAL JPG] settings are deleted, both RAW
and JPEG images will be deleted.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Image Size Setting ( RECORDING PIXELS)
Sets the size of the photographed image.
ZSetting the image size in the [SHOOTING MENU]
Select the desired image size for the [ RECORDING
PIXELS] under [SHOOTING MENU].
ZAvailable settings for the image size
See “Setting the [SHOOTING MENU]” (➝p.108).
4256×2848:
Sets the image size to 4256 × 2848 pixels (approx.
12.1 megapixels). You can record the fewest number
of images in this mode.
SHOOTINNG MENU
ISO
200
AUTO
WHITE BAALANCE
WB FINEE TUNE
QUALITY
3024×2016:
4256xx2848
3024xx2016
2304xx1536
Sets the image size to 3024 × 2016 pixels (approx. 6.1
megapixels).
2304×1536:
Sets the image size to 2304 × 1536 pixels (approx.
3.54 megapixels). You can record the largest number
of images in this mode.
ZSetting the image size using QUAL and the sub-
command dial
ZGuide to printed image sizes
While pressing QUAL, rotate the sub-command dial until
the desired setting is displayed in the control panel.
4256x2848
3024x2016
2304x1536
Printing at up to 35.6 × 43.2 cm (14
× 17 in.) / A3 size
Printing at up to 10R (25.4 × 30.5
cm/10 × 12 in.) / A4 size
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Color Balance (TWHITE BALANCE)
Change the settings when you want to set the white
balance to suit the natural or artificial lighting conditions
when you shoot.
When [AUTO] is selected, the correct white balance
sometimes cannot be obtained under special light
sources or for subjects where people’s faces are
highlighted, etc. In such cases, select the correct white
balance setting for the light source.
dFLASH
Use with built-in flash or Nikon flash units.
SHADE
Select this setting for shots taken in shade or on cloudy
days.
CHOOSE COLOR TEMP.
Choose color temperature from list of values (➝p.97).
]PRESET CUSTOM 1-5
d
The photographer can set the white balance based on
the subject of light source. Use gray or white object as
reference for the setting white balance.
ZAvailable settings for the white balance
A AUTO
The camera automatically determines the amount of
light and the color information for the shot and takes
the picture with a natural white balance. For best
results, use type G or D lens.
MEMO
• Auto white balance is recommended with most light
sources. If the desired results cannot be achieved with
auto white balance, choose an option from the list
P
8INCANDESCENT
Select this setting for shots when the light source is
incandescent bulbs or lights.
FLUORESCENT LAMP-1
Select this setting for shots taken under “Daylight”
fluorescent lamps.
FLUORESCENT LAMP-2
Select this setting for shots taken under “Daylight
above. Also, use
Balance.
• Auto white balance may not produce the desired results
with studio strobe lighting. Choose a color temperature,
use preset white balance, or set white balance to flash
and use fine tuning to adjust white balance.
WB FINE TUNE or Preset White
• When using settings other than
CHOOSE COLOR
TEMP. and ]PRESET CUSTOM 1-5, use the built-in
flash or Nikon SB-800 and SB-600 Speedlights to
produce appropriate white balance at the flash firing.
White” fluorescent lamps.
FLUORESCENT LAMP-3
Select this setting for shots taken under “Cool White”
fluorescent lamps.
FLUORESCENT LAMP-4
Select this setting for shots taken under “Warm White”
Continued Q
fluorescent lamps.
FLUORESCENT LAMP-5
Select this setting for shots taken under “Living Room
Warm White” fluorescent lamps.
6FINE
Select this setting for outdoor shots in fine weather
when the light source for the shot is the sun.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Color Balance (TWHITE BALANCE)
ZSetting the color balance in the [SHOOTING
MENU]
ZSetting the color balance using WB and the
command dials
Select the desired setting for [T WHITE BALANCE]
under [SHOOTING MENU].
See “Setting the [SHOOTING MENU]” (➝p.108).
AWhile pressing WB, rotate the main-command dial until
the desired setting is displayed in the control panel.
WHITE BAALANCE
AUTO
INCANDEESCENT
FLUORESCEENT LAAMP-1
FLUORESCEENT LAAMP-2
FLUORESCEENT LAAMP-3
FLUORESCEENT LAAMP-4
MEMO
When [OK] is selected for the []PRESET CUSTOM],
preset white balance is applied. If the preset white
balance is not yet set, select [NEW WB], then set the
white balance to be applied (➝p.99).
BWhile pressing WB, rotate the sub-command dial to
select the number when
step.
or PRE is selected for A
96
Download from Www.Somanuals.com. All Manuals Search And Download.
ZSetting the color temperature using WB and the
command dials
CHOOSE COLOR TEMP.
For taking a picture in daylight without flash or artificial
light, such as taking a landscape, you can specify color
AWhile pressing WB, rotate the main-command dial until
is displayed in the control panel.
temperature to set white balance. When
CHOOSE
BWhile pressing WB, rotate the sub-command dial until
the desired value is displayed.
COLOR TEMP. is selected for the white balance setting,
you can specify color temperature by specifying a
numeric value. When taking a picture with flash or
fluorescent light, select dFLASH mode or
d
FLUORESCENT mode respectively.
ZSetting the color temparture in the [SHOOTING
MENU]
WHITE BAALANCE
P
7700K
FLUORESCEENT LAAM
7100K
MEMO
FINE
6700K
FLASH
6300K
SHADE
5900K
• The camera may not produce the desired white
balance, even when the numeric value measured by an
external color temperature meter is applied on the
camera. Take a test shot to determine if the selected
value is appropriate to the light source.
CHOOSE COLLOR TE
5600K
PRESET CCUSTOM 1
ASelect the [ CHOOSE COLOR TEMP.] under [T
WHITE BALANCE] in the [SHOOTING MENU].
See “Setting the [SHOOTING MENU]” (➝p.108).
BPress nor oto select the desired color
temperature.
CPress MENU/OK.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Color Balance (TWHITE BALANCE)
WB FINE TUNE
R(RED)-Cy: Enhances the
redness of an image when the
value is +, the cyan of an image
when the value is -.
AWB/PPRECEETT WB FINE TUNE
The white balance can be fine tuned within a range of
between +3 and –3, in 1-step increments .
R
B
0
0
B(Blue)-Ye: Enhances the blue
of an image when the value is
+, the yellow of an image when
the value is -.
Enhances the magenta of an
image when both R-Cy and B-
Ye values are +, the green of an
image when -.
Cy
Ye
[AWB/PRE.WB]
Fine tune all white balaces except PRE CUS in single
operation.
[] PRE CUS.1] – [] PRE CUS.5]
Fine tune the white balance for each PRE CUS
settings.
SET
CANCEL
ZFine tuning in the [SHOOTING MENU]
DPress n, o, q, or pto set the desired
fine tuning value between –3 and +3.
WB FINNE TUNE
HELP
AWB/PRRE.WB
PRE CUS
PRE CUS
PRE CUS
PRE CUS
PRE CUS
.
.
.
.
.
1
2
3
4
5
EPress MENU/OK.
ASelect the [
MENU].
WB FINE TUNE] under [SHOOTING
CAUTION
The setting for fine tuning white balance will not be reset
when the shooting menu is reset, or the camera is turned
off.
See “Setting the [SHOOTING MENU]” (➝p.108).
BPress nor oto select the item to fine
tune.
CPress q.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset White Balance
EHold up a sheet of white paper, reflectivity
of 18% grey card, etc., under the target
light source. Frame the white balance
reference object in the center of the
Use this function to set the correct white balance for a light
source. You can also use this function to achieve a
desired special effect.
viewfinder. Then press the shutter button.
ZSetting the preset white balance in the [SHOOTING
COMPLEETED!
d
MENU]
ASet the focus-mode selector to M (manual).
WHITE BAALANCE
FLUORESCEENT LAAMP-5
SET
CANCEL
FINE
FLASH
SHADE
CHOOSE COLLOR TEM
PRESET CCUSTOM 1
P
NEW WB
OK
FIf the exposure is measured correctly,
“COMPLETED!” appears on the LCD
monitor.
Check that the white balance reference
object fills the
BSelect one of the ]PRESET CUSTOM items under
[TWHITE BALANCE] in the [SHOOTING MENU].
See “Setting the [SHOOTING MENU]” (➝p.108).
area on the LCD
monitor. Press MENU/OK to confirm the
setting.
CPress nor oto select [NEW WB].
ZWhen the exposure is not measured correctly
OVER: The subject is too bright. Use a negative (–)
exposure compensation value and set the white
balance again.
DPress q.
UNDER: The subject is too dark. Use a positive (+)
exposure compensation value and set the white
balance again.
PRESET CCUSTOM 1
Continued Q
CANCEL
NEW WB
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Color Balance (TWHITE BALANCE)
ZSetting the preset white balance using WB and the
EIf the exposure is measured correctly,
blinks in
command dials
the shutter speed display in the control panel, and
blinks in the shutter speed display in the viewfinder for
about 3 seconds. Then preset recording mode ends.
AWhile pressing WB, rotate the main-command dial until
PRE (preset) is displayed in the control panel.
BWhile pressing WB, rotate the sub-command dial to
select a preset custom number (P-1 to P-5).
ZWhen the exposure is not measured correctly
When the exposure is not measured correctly,
blinks in the shutter speed display in the control panel
(exposure display in the viewfinder) for about 3 seconds,
then returns to the Cstep.
CRemove your finger from WB and press
again for more than 1.5 seconds.
Preset recording mode is activated and
flashes in the viewfinder and the
control panel. Also, the preset custom
number and PRE flash in the control panel.
MEMO
The preset white balance cannot be set if:
- the memory card is full.
- the memory card has an error.
-
is flashing.
- the frame number has reached 999-9999.
is set in exposure mode
-
.
DHold up a sheet of white paper, etc., under
the target light source. Be sure the
whiteness fills the frame. Then press the
shutter button.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Timer Mode
You can use the self-timer when you want to be in the
photograph. Use a tripod or place the camera on a stable
surface before using the self-timer.
3 Press the shutter button down halfway to
focus on the subject and press the shutter
button fully.
ZAvailable settings for the self-timer
2 SEC/5 SEC/10 SEC/20 SEC
A
1 Select the desired time for the [SELF-
TIMER] under [ SHOOTING] in the [SET
UP] menu.
MEMO
See “Using the [SET UP] menu” (➝p.138).
In single-servo AF (➝p.54), photographs can only be
taken if the in-focus indicator (l) appears in the
viewfinder.
P
SHOOTING
IMAGE COOMMENT
OFF
BARCODE REEADERR/GPS
SHOOTINGG SPEED
EXPOSURE DDELAYY MODE
SELF-TTIMER
20 SEC
10 SEC
5 SEC
2 SEC
Continued Q
QUICK PREEVIEW DATA
2 While pressing the release mode dial
unlock button, rotate the release mode dial
to select * (self-timer mode).
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Timer Mode
4 The picture is taken in the selected time.
To cancel the self-timer
To turn the self-timer off before a
photograph is taken, hold down the
release mode dial unlock button and
turn the release mode dial to another
setting.
• The self-timer lamp (AF-assist illuminator) will start to
blink and a beep will begin to sound.
• Two seconds before the photograph is taken, the self-
timer lamp will stop blinking and the beeping will
become more rapid.
• The self-timer will be cancelled if the built-in flash is
raised before the picture is taken. To start the timer after
raising the flash, wait until the flash-ready indicator is
displayed in the viewfinder and then press the shutter
button.
MEMO
• In exposure modes other than manual, remove the
viewfinder eyepiece cup and insert the supplied
eyepiece cap as shown. This prevents light entering via
the viewfinder from interfering with exposure.
• In self-timer mode, a shutter speed of
equivalent to approximately 1/3 s.
is
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Bracketing
The camera provides two types of auto bracketing. In
exposure bracketing, the camera varies exposure
compensation with each shot. In flash bracketing, flash
level is varied for each shot.
1 Select the desired setting for [AUTO
BRACKETING SET] under [
in the [SET UP] menu.
FLASH/BKT]
See “Using the [SET UP] menu” (➝p.138).
ZAvailable auto bracketing settings
FLASH/BRRACKETING
Exposure and Flash Bracketing ([AE & FLASH])
Performs both AE bracketing and flash bracketing at
the same time.
d
1/250
1/60
FLASH SYNC SPEED
FLASH Tv SPEED
BUILT-IN FLASH
Exposure Bracketing ([AE ONLY])
AE
&
FLASH
MODELING FLASH
AE ONLY
When AE bracketing is set and each time the shutter
button is pressed, the preset number of frames
(maximum 9 shots) is shot while the exposure
automatically changes according to the exposure
increment setting (measured from the original
exposure displayed by the camera). You can set in any
exposure mode (programmed auto, manual, etc.),
however the compensation (shutter speed/exposure)
varies for each. The maximum step value is 4EV,
excluding exposure compensation.
AUTO BRACKETING
:FLASHH ONLY
EXP.MODE
AUTO BKT IN
M
2 While pressing BKT, rotate the main-
command dial to choose the number of
shots in the bracketing sequence (➝p.106).
h
Flash Bracketing ([d: FLASH ONLY])
When flash bracketing is set and each time the shutter
button is pressed, the preset number of frames
(maximum 9 frames) is shot while the flash level
automatically changes. The maximum step value is
4EV, excluding flash compensation. The flash
bracketing can be performed only when i-TTL mode or
auto aperture (Nikon Speedlight SB-800 only) is set.
At settings other than zero, a
icon and bracketing
indicator will be displayed in the control panel and the
Dicon will blink in the control panel and viewfinder.
103
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Bracketing
• Modifications to exposure are added to those made with
exposure compensation, making it possible to achieve
exposure compensation values of more than 5 EV.
3 While pressing BKT, rotate the sub-
command dial to choose the exposure
increment (➝p.106).
To cancel bracketing
To cancel bracketing, hold down BKT and rotate the main-
command dial until the number of shots in the bracketing
sequence is zero and
is no longer displayed in the control
panel. The program last in effect will be restored the next time
bracketing is activated. Bracketing can also be cancelled by
performing a two-button reset (➝p.120). In this case also, the
bracketing program will be restored the next time bracketing is
activated.
4 Frame a photograph, focus, and shoot.
• While bracketing is in effect, a bracketing progress
indicator will be displayed in the control panel. A
segment will be disappear from the indicator after each
shot.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
ZExposure Bracketing
MEMO
The camera modifies exposure by varying shutter speed
and aperture (programmed auto), aperture (shutter-
priority auto), or shutter speed (aperture-priority auto,
manual exposure mode).
• In single frame and self-timer modes, one shot will be
taken each time the shutter button is pressed. In
continuous low speed and continuous high speed
modes, shooting will pause after the number of shots
specified in the bracketing program have been taken.
Shooting will resume the next time the shutter button is
pressed.
• If the memory card fills before all shots in the sequence
have been taken, shooting can be resumed from the
next shot in the sequence after the memory card has
been replaced or shots have been deleted to make
room on the memory card. If the camera is turned off
before all shots in the sequence have been taken,
bracketing will resume from the next shot in the
sequence when the camera is turned on.
P:shutter speed and aperture *1
S:aperture*1
A:shutter speed*1
M:shutter speed*2
d
*
1 When [ON] is selected for the [ISO AUTO CONTROL]
under [ISO AUTO CONTROL] under [SEXPOSURE]
in the [SET UP] menu, the camera will automatically
vary ISO sensitivity for optimum exposure when the
limits of the camera exposure system are exceeded.
2 Can be modified by the [AUTO BKT IN M EXP.MODE]
h
*
under [
(➝p.165).
FLASH/BKET] in the [SET UP] menu
Continued Q
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Bracketing
ZBracketing Programs
The programs available when [AE & FLASH], [AE ONLY] or [d: FLASH ONLY] is selected for [AUTO BRACKETING SET]
under [ FLASH/BKT] in the [SET UP] menu depend on the option selected for [EV CONTROL STEPS].
1/3 Step Selected for EV Step
Control panel display
No. of shots
Exposure increment
Bracketing order (EVs)
3
3
3
3
3
3
2
2
2
2
2
2
3
3
3
5
5
5
7
7
7
9
9
9
+1/3
+2/3
+1
+0.3, 0, +0.7
+0.7, 0, +1.3
1.0, 0, 2.0
–1/3
–2/3
–1
–0.3, –0.7, 0
–0.7, –1.3, 0
–1.0, –2.0, 0
+1/3
+2/3
+1
0, +0.3
0, +0.7
0, +1
–1/3
–2/3
–1
0, –0.3
0, –0.7
0, –1
1/3
2/3
1
0, –0.3, +0.3
0, –0.7, +0.7
0, –1, +1
1/3
2/3
1
0, –0.7, –0.3, +0.3, +0.7
0, –1.3, –0.7, +0.7, +1.3
0, –2.0, –1, +1, +2.0
1/3
2/3
1
0, –1.0, –0.7, –0.3, +0.3, +0.7, +1.0
0, –2.0, –1.3, –0.7, +0.7, +1.3, +2.0
0, 3.0, –2.0, –1.0, +1.0, +2.0, +3.0
0, –1.3, –1.0, –0.7, –0.3, +0.3, +0.7, +1.0, +1.3
0, –2.7, –2.0, –1.3, –0.7, +0.7, +1.3, +2.0, +2.7
0, –4.0, –3.0, –2.0, –1.0, +1.0, +2.0, +3.0, +4.0
1/3
2/3
1
106
Download from Www.Somanuals.com. All Manuals Search And Download.
1/2 Step Selected for EV Step
Control panel display
No. of shots
Exposure increment
Bracketing order (EVs)
3
3
3
3
2
2
2
2
3
3
5
5
7
7
9
9
+1/2
+1
–1/2
–1
+0.5, 0, +1.0
1.0, 0, 2.0
–0.5, –1.0, 0
–1.0, –2.0, 0
d
+1/2
+1
–1/2
–1
0, +0.5
0, +1
0, –0.5
0, –1
1/2
1
0, –0.5, +0.5
0, –1, +1
h
1/2
1
0, –1.0, –0.5, +0.5, +1.0
0, –2.0, –1, +1, +2.0
1/2
1
0, –1.5, –1.0, 0.5, +0.5, +1.0, +1.5
0, –3.0, –2.0, –1.0, +1.0, +2.0, +3.0
0, –2.0, –1.5, –1.0, –0.5, +0.5, +1.0, +1.5, +2.0
0, –4.0, –3.0, –2.0, –1.0, +1.0, +2.0, +3.0, +4.0
1/2
1
1 Step Selected for EV Step
Control panel display
No. of shots
Exposure increment
Bracketing order (EVs)
3
3
2
2
3
5
7
9
+1
–1
+1
–1
1
1.0, 0, 2.0
–1.0, –2.0, 0
0, +1
0, –1
0, –1, +1
1
0, –2.0, –1, +1, +2.0
1
0, –3.0, –2.0, –1.0, +1.0, +2.0, +3.0
0, –4.0, –3.0, –2.0, –1.0, +1.0, +2.0, +3.0, +4.0
1
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Using SHOOTING MENU
Use these menus to adjust image quality or focus. You
can take pictures in a wide range of conditions.
3 Change the setting.
SHOOTINNG MENU
Setting the [SHOOTING MENU]
HIGH
MEDIUMM HIGH
STD
MEDIUUM LOW
ORG
B/W
FILM SIMUULATION
D-RANGE
COLOR
TONE
SHARPPNESS
COLORR SPACE
1 Display the [SHOOTING MENU].
ASet the camera to shooting mode. If the playback mode
is active, press the shutter button halfway.
BPress MENU/OK to open the [SHOOTING
APress q.
MENU].
Different type of screen appears
depending on selected item.
2 Select the item.
BPress nor oto change the setting.
CPress MENU/OK to confirm the setting.
SHOOTINNG MENU
FILM SIMUULATION
D-RANGE
COLOR
TONE
SHARPPNESS
COLORR SPACE
STD
AUTO
STD
STD
STD
sRGB
Help on the menu screen
Help is available when the
upper right of the screen while selecting items in menus. Press
HELP mark is displayed in the
APress nor oto select the item.
and hold the
for a description of the selected item.
ENU
ULATION
STD
AUTO
STD
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.108)
List of [SHOOTING MENU] options
Menu
Functions
Settings
*
Sets the image formation parameters for images. You can STANDARD / JF1 / JF1a / JF1b / J
FILM SIMULATION
(➝p.111)
select from Standard (STANDARD), Studio Portrait (F1,
F1a, F1b, F1c), or Fujichrome (F2).
F1c/ JF2
*
d
D-RANGE
(➝p.112)
AUTO / 100%(STD) / 130% / 170% /
Sets the dynamic range of images.
Sets the density of the color of images.
Sets the contrast of images.
230%(W1) / 300% / 400%(W2)
*
COLOR
(➝p.113)
HIGH / MEDIUM HIGH / STD /MEDIUM
LOW / ORG / B/W
*
TONE
HARD / MEDIUM HARD / STD / MEDIUM
(➝p.113)
SOFT / ORG
*
SHARPNESS
(➝p.114)
Softens or sharpens the outlines in an image and to adjust HARD / MEDIUM HARD / STD / MEDIUM
P
the quality of the images.
SOFT / OFF
*
COLOR SPACE
(➝p.114)
sRGB / Adobe RGB (1998)
Sets the color space to sRGB or Adobe RGB (1998).
*
Specifies light sensitivity.
100 / 125 / 160 / 200 / 250 / 320 / 400 / 500
ISO
(➝p.92)
The higher the value, the higher the sensitivity obtained. / 640 / 800 / 1000 / 1250 / 1600 / 2000 / 2500
Higher sensitivity settings will allow you to take pictures in / 3200
darker locations.
*
AUTO /8 INCANDESCENT/
T WHITE BALANCE
(➝p.95)
Adjusts the color balance to suit the color of the ambient FLUORESCENT LAMP 1–5 / 6FINE / d
light around the subject.
FLASH /
SHADE /
CHOOSE
COLOR TEMP. / ]PRESET CUSTOM 1-5
*
WB FINE TUNE (➝p.98) Fine tunes white balance.
–3 / –2 / –1 / 0 / +1 / +2 / +3
Factory default
*
109
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Using SHOOTING MENU
Setting the menu (➝p.108)
Menu
Functions
Sets the quality of images.
Settings
*
QUALITY
RAW / FINE / NORMAL JPG / RAW+FINE
(➝p.93)
JPG / RAW+NORMAL JPG
*
RECORDING PIXELS
(➝p.94)
Sets the size of images.
2304x1536 /
4256x2848
3024x2016
/
*
MULTIPLE EXPOSURE Enables shooting multiple exposures in the same frame. OFF / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
(➝p.115)
Images are overlayed on top of each other.
LIVE VIEW DISPLAY
(➝p.117)
Enables monitoring an image on the LCD monitor while
adjusting the focus.
B&W / COLOR*
STD* / ORG
SHOOTING MENU
RESET (➝p.119)
Resets the [SHOOTING MENU] to the factory default
settings.
–
NOISE REDUCTION
Sets the noise reduction effect.
(➝p.119)
Factory default
*
110
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING MENU
Setting the menu (➝p.108)
ZFine tuning the film simulation
Enables fine tuning the film simulation settings other than
[JSTANDARD].
FILM SIMULATION
Sets the image formation parameters for photographed
images.
F1a FINNE TUNE
SHOOTINNG MENU
HELP
+2
COLOR
+1
STANDARD
TONE
FILM SIMULATION
0
F1
SHARPPNESS
A
D-RANGE
F1a
-
-
1
2
COLOR
F1b
TONE
F1c
SHARPPNESS
F2
SET
CANCEL
COLORR SPACE
ASelect the film simulation setting to be fine tuned.
[STANDARD]
This is the standard image composition mode and is
ideal for a wide range of subjects, including portraits
and scenery.
BPress qto display the screen for fine tune
setting.
P
[JF1]
This mode suppresses flaring in flash highlights when
the flash is used and also stresses smooth tonal
transitions in the reproduction of skin tones. It is ideal
for studio portrait work where the aim is professional-
standard negatives.
CPress nor oto select the item.
DPress q.
[JF1a]
Saturation is slightly enhanced in comparison with [F1]
mode.
[JF1b]
Reproduces skin tones with smooth transitions. Also
provides vibrant reproduction of natural colors such as
blue skies and is ideal for daylight portraits.
[JF1c]
EPress nor oto select the fine tune value
between +2 and -2.
Increased sharpness in comparison with the [F1]. Ideal
for fashion shooting.
FPress MENU/OK to confirm the setting.
[JF2]
This mode provides vibrant reproduction of natural
colors such as blue skies and is ideal for landscape
and nature photography.
Continued Q
111
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING MENU
Setting the menu (➝p.108)
MEMO
D-RANGE
Depending on the selected film simulation mode, the fine
tune value may be displayed in gray, and will not be
selectable.
Sets the dynamic range used for photographed images.
SHOOTINNG MENU
300%
FILM SIMUULATION
230% (W1)
D-RANGE
170%
COLOR
130%
TONE
100% ((STD)
SHARPPNESS
AUTO
COLORR SPACE
[AUTO]
The camera automatically varies the dynamic range
between 100% and 400% according to the scene being
shot before taking the picture. This mode suppresses
white flaring and black patches in scenes with high
contrast while also enabling you to achieve good levels
of contrast in pictures taken indoors or in cloudy
weather where a wide dynamic range is not needed.
[100%(STD)], [130%], [170%], [230%(W1)], [300%],
[400%(W2)]
Takes the picture with a fixed dynamic range value,
regardless of the scene being shot.
CAUTION
Dynamic range can be set if [STD] is set under [
SIMULATION] in the [SHOOTING MENU].
FILM
MEMO
When [100% (STD)] is selected, the continuous shooting
interval will be faster. Also in this case, only S-pixel is
used for images, and only 100% can be selected for the
dynamic range settings in Hyper-Utility Software HS-V3,
even for RAW images.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.108)
COLOR
TONE
Sets the density of the color used when shooting images.
Use this setting to adjust the contrast of images to be
shot.
SHOOTINNG MENU
SHOOTINNG MENU
HIGH
FILM SIMUULATION
MEDIUMM HIGH
D-RANGE
STD
FILM SIMUULATION
HARD
COLOR
d
MEDIUUM LOW
D-RANGE
MEDIUMM HARD
COLOR
TONE
ORG
SHARPPNESS
B/W
STD
TONE
COLORR SPACE
MEDIUMM SOFT
SHARPPNESS
ORG
COLORR SPACE
[HIGH]
This setting provides the highest color density.
[MEDIUM HIGH]
This setting provides a higher color density than [STD].
[STD]
This setting sets the standard color density.
[MEDIUM LOW]
[HARD]
This setting provides the highest level of contrast.
[MEDIUM HARD]
This setting provides a higher level of contrast than
[STD].
[STD]
This setting sets the contrast for photographed images
to the standard level.
h
This setting specifies a lower color density than [STD].
[ORG]
This setting specifies the lowest color density. Use this
setting for images that will undergo image processing
for use in commercial printing.
[B/W]
This setting converts the colors in the photographed
image to black and white.
[MEDIUM SOFT]
This setting specifies a lower contrast than [STD].
[ORG]
This setting specifies the lowest contrast. Use this
setting for images that will undergo image processing
for use in commercial printing.
CAUTION
CAUTION
• Color can be set if [STD] is set under [
FILM
• Tone can be set if [STD] is set under [
FILM
SIMULATION] in the [SHOOTING MENU].
• If you want to view or print the image data directly, do
not select [ORG].
SIMULATION] in the [SHOOTING MENU].
• If you want to view or print the image data directly, do
not select [ORG].
113
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING MENU
Setting the menu (➝p.108)
SHARPNESS
COLOR SPACE
Use this setting to soften or sharpen the outlines in an
image and to adjust the quality of the photographed
image.
Sets the color space to either sRGB or Adobe
RGB(1998).
SHOOTINNG MENU
SHOOTINNG MENU
FILM SIMUULATION
D-RANGE
COLOR
STD
AUTO
STD
FILM SIMUULATION
HARD
D-RANGE
MEDIUMM HARD
COLOR
TONE
sRGB
STD
TONE
Adobe RGBB (1998)
COLORR SPA
MEDIUMM SOFT
SHARPPNESS
OFF
COLORR SPACE
[sRGB]
For normal shooting.
[Adobe RGB (1998)]
For images that will undergo image processing (for
example, for use in commercial printing).
[HARD]
This setting sharpens the outlines in an image and is
best for images of subjects such as buildings or text
where clarity is important.
[MEDIUM HARD]
This setting sharpens the outlines more than [STD].
[STD]
This setting applies the optimum level of sharpness for
normal shots.
[MEDIUM SOFT]
This setting softens the outlines more than [STD] and
is best for images such as portraits.
[OFF]
Sharpness processing is not applied in this setting.
Use this setting for images that will undergo image
processing for use in commercial printing.
CAUTION
• Sharpness can be set if [STD] is set under [
SIMULATION] in the [SHOOTING MENU].
FILM
• If you want to view or print the image data directly, do
not select [OFF].
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.108)
ISO
MULTIPLE EXPOSURE
See p.92 for details.
A series of two to ten exposures is recorded as a single
photograph.
T WHITE BALANCE
ASelect a number of overlaying exposures for
See p.95 for details.
[
MULTIPLE EXPOSURE] under the [SHOOTING
d
MENU].
WB FINE TUNE
SHOOTINNG MENU
HELP
See p.98 for details.
6
5
MULTIPLE EEXPOSURE
LIVE VIEWW DISPLAY
SHOOTING MENU RESET
NOISE REDDUCTION
4
QUALITY
3
2
OFF
See p.93 for details.
h
RECORDING PIXELS
BFrame a photograph, focus, and shoot the first frame.
See p.94 for details.
• A
icon will be displayed in the control panel.
• In the continuous high speed or continuous low speed
mode the camera will record all exposures in a single
burst. In the single frame shooting mode, one
photograph will be taken each time the shutter button is
pressed; continue shooting until all exposures have
been recorded.
Continued Q
115
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING MENU
Setting the menu (➝p.108)
CPerform subsequent shooting.
MEMO
• The image is displayed after the shooting. When
pressing , images can be deleted and restart
shooting from the beginning. The playback zoom or
zoom in face functions can be performed by pressing
n, oor
. Press DISP/BACK to cancel the
playback zoom or zoom in face function.
1 / 3
DWhen the preset number of exposures have been shot,
a single overlaid photograph is displayed.
EPress MENU/OK to record the image (exits multiple
exposure mode).
RE-SHOOT
• If no operation is performed for the preset time for the
auto power save function, the camera records any
images shot up to that point as an overlayed single
photograph, then exits the multiple exposure mode.
• The
icon in the control panel will disappear.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.108)
CAUTION
LIVE VIEW DISPLAY
• Do not remove or replace the memory card while
recording a multiple exposure.
To manually focus the image more sharply or to check the
image, you can view the image on the LCD monitor while
adjusting the focus.
• The information listed in the playback photo information
display (including date of recording and camera
orientation) is for the first shot in multiple exposure.
• While multiple exposure mode is in effect, some of the
shooting menus are limited.
• Shooting will end automatically and the shot images up
to that point are recorded as an overlayed single
photograph if:
1 Set the focus-mode selector to (manual).
(➝p.60)
d
2 Select [ LIVE VIEW DISPLAY] under
- No operation is performed for more than 30 seconds.
- The camera is turned off.
[SHOOTING MENU], or press and hold
.
- The battery is exhausted.
- wis pressed.
- SET UP is pressed.
3 Select the display color.
P
LIVE VIEWW DISPLAY
USE AT MF
• Dynamic range will be 400% even if [AUTO] is selected
for [
D-RANGE] in multiple exposure shooting.
• Multiple exposure shooting cannot be performed when
ISO auto control is set to ON (in [ISO AUTO CONTROL]
under [ISO AUTO CONTROL] under [SEXPOSURE]
in the [SET UP] menu), or auto bracketing is set.
B&W
COLOR
YES
CANCEL
APress nor oto select [B&W] or
[COLOR].
BPress MENU/OK to confirm the setting.
MEMO
Press DIS/BACK to cancel the live view display.
Continued Q
117
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING MENU
Setting the menu (➝p.108)
MEMO
4 Enlarge an image for focusing.
• While LIVE VIEW DISPLAY is in effect, the PC
connection indicator will be displayed in the control
panel. This is normal.
30 SEC
28 SEC
+
• When turning the camera off after LIVE VIEW
DISPLAY, the shutter speed may be set to
Choose your desired shutter speed again.
• To view the live image, using the optional AC adapter
AC-135VN is recommended.
• Continued use of live image display can cause the CCD
to overheat, resulting in coarseness or noise such as
white spotting in images. If this occurs, turn the camera
off and wait for it to cool down before starting again.
• If you display consecutive live images, the previous
brightness setting is retained for subsequent images.
The setting is reset when you turn the camera off (or the
auto power save function is triggered) and has to be set
again.
.
+
-
-
ENLARG
CANCEL
FULL FFRAME
CANCEL
APress nor oto enlarge an image.
BFocus an image manually.
• The live image cannot be displayed when auto
bracketing is set. Cancel the auto bracketing to display
the live image.
MEMO
• The duration for displaying an image is 30 sec.
• Press por qto change brightness.
CPress DISP/BACK to return to normal
shooting.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.108)
SHOOTING MENU RESET
NOISE REDUCTION
The [SHOOTING MENU] can be reset to the factory
default.
Set the noise reduction effect.
SHOOTINNG MENU
HELP
OFF
SHOOTING MEENU RESET
RESET OK?
MULTIPLE EEXPOSURE
LIVE VIEWW DISPLAY
SHOOTING MEENU RESET
NOISE REDDUCTION
d
OK
CANCEL
STD
ORG
SET
[STD]
Use this setting for most situations. The image will be
clear and contain less noise.
[ORG]
APress nor oto select [OK].
h
This function is less effective than [STD], and is best for
night sky shots.
BPress MENU/OK to reset [SHOOTING
MENU] to the factory default.
MEMO
Resets all [SHOOTING MENU] options except [
FINE TUNE].
WB
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Two-Button Reset
The camera settings easily can be restored to the
defaults. This function is convenient should you want to
restore the defaults while operating the camera.
ZThe [SHOOTING MENU] options to be reset
All [SHOOTING MENU] options other than []PRESET
CUSTOM 1-5] and [ WB FINE TUNE] will be reset.
Hold Dand QUAL down together for more than two
seconds (these buttons are marked with a green dot). The
control panel turns off briefly while the defaults are
restored.
MEMO
The [SET UP] menu options cannot be reset by the two-
button reset.
ZThe settings to be reset
*1
Focus area
Center
Exposure mode
(Programed auto)
Flexible Program
Cancelled
Exposure compensation
Auto Exposure Lock
Auto Exposure Bracketing
Flash Synchro mode
Cancelled (0.0)
*2
Cancelled
*3
Cancelled
Front Synchro mode
Flash exposure compensation Cancelled (0.0)
FV lock Canceled
1 If group dynamic-AF is set for the AF area mode, the
*
*
*
center group will be selected.
2 [AE/AF-L BUTTON] under [ BUTTON
ASSIGNMENT] in the [SET UP] menu will not be reset.
3 Bracketing increment is reset to 1 EV (AE and flash
bracketing).
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Non-CPU Lenses
By specifying lens data (lens focal length and maximum
aperture), the user can gain access to a variety of CPU
lens functions when using a non-CPU lens.
Specifying both the focal length and maximum
aperture of the lens:
• Enables color matrix metering (note that it may be
necessary to use center-weighted or spot metering to
achieve accurate results with some lenses, including
Reflex-Nikkor lenses).
If the focal length of the lens is known:
• Automatic power zoom can be used with optional Nikon
SB-800 and SB-600 Speedlights.
• Improves the precision of center-weighted and spot
• Lens focal length is listed (with a
photo info display.
) in the playback
metering and i-TTL Balanced Fill-Flash for Digital SLR.
d
When the maximum aperture of the lens is known:
• The aperture value is displayed in the control panel and
viewfinder.
• Flash level is adjusted for changes in aperture.
• Aperture is listed (with a ) in the playback photo info
display.
P
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Non-CPU Lenses
Specifying lens focal length
FOCAL LENNGTH (mm)
6-45
15
13
The following lens focal lengths are available.
6, 8, 13, 15, 16, 18, 20, 24, 25, 28, 35, 43, 45, 50, 55, 58,
70, 80, 85, 86, 100, 105, 135, 180, 200, 300, 360, 400,
500, 600, 800, 1000, 1200, 1400, 1600, 2000, 2400,
2800, 3200, 4000mm.
8
6
SET
CANCEL
ZSetting the lens focal length in the [SET UP] menu.
See “Using the [SET UP] menu” (p.138)
EPress q.
FOCAL LENNGTH (mm)
50 - 180
6 - 45
FPress nor oto select the focal length of
N/A
the attached lens.
SET
CANCEL
GPress MENU/OK to confirm the setting.
ADisplay the [NON-CPU LENS DATA] screen by
selecting the [NON-CPU LENS DATA] under [
MISC.] in the [SET UP] menu.
BPress nor oto select [FOCAL LENGTH
(mm)].
CPress q.
DPress nor oto select the item including
the focal length of the attached lens.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
ZSetting the lens focal length using the FUNC.
button and main-command dial
Specifying maximum aperture
The following f/-numbers are available:
1.2, 1.4, 1.8, 2, 2.5, 2.8, 3.3, 3.5, 4, 4.5, 5, 5.6, 6.3, 7.1, 8,
9.5, 11, 13, 15, 16, 19, 22
ASelect [FV LOCK/LENS DATA] for [FUNC. BUTTON]
under [ BUTTON ASSIGNMENT] in the [SET UP]
menu (➝p.138, 168).
BChoose the focal length of the attached lens by rotating
the main-command dial while pressing the FUNC.
button.
ZSetting the maximum aperture in the [SET UP]
menu
A
See “Using the [SET UP] menu” (➝p.138)
NON-CPU LLENS DATA
N /A
FOCAL LENNGTH (mm)
1 . 2
MAXIMUM APERTURE
1 . 4
1 . 8
2 . 0
2 . 5
P
ADisplay the [NON-CPU LENS DATA] screen by
selecting [NON-CPU LENS DATA] under [
in the [SET UP] menu.
MISC.]
BPress nor oto select [MAXIMUM
APERTURE].
CPress q.
DPress nor oto select the maximum
aperture for the attached lens.
EPress MENU/OK to confirm the setting.
123
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Non-CPU Lenses
ZSetting the maximum aperture using the FUNC.
button and sub-command dial
ASelect [FV LOCK/LENS DATA] for [FUNC. BUTTON]
under [ BUTTON ASSIGNMENT] in the [SET UP]
menu (➝p.168).
BDisplay the maximum aperture of attached lens by
rotaing the sub-command dial while pressing the
FUNC. button.
MEMO
• If the built-in flash, Nikon Speedlight SB-800, or SB-600
are used, the FV lock is activated, the lens focal length
cannot be set. If the built-in flash is raised, close it. If the
Speedlight is attached, turn it off.
• If the correct focal length is not listed, choose the
closest value greater than the actual focal length of the
lens.
• Lens data is not adjusted when a non-CPU lens is
zoomed in or out. After changing the zoom position,
select new values for the lens focal length and
maximum aperture.
• Selecting a focal length sets maximum aperture to the
last value selected at that focal length.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Using PLAYBACK MENU
Use these menus to playback photographed images.
Setting the [PLAYBACK MENU]
APress wto set the camera to playback
mode.
PLAYBACK MENU
ERASE
PRINT ORDEER (DPOF)
PROTECT
SLIDEE SHOW
LCD BRIGGHTNESS
CROPPING
BPress MENU/OK to open the [PLAYBACK
MENU].
CPress nor oto select the item.
DPress q.
Different type of screen appears
depending on selected item.
EPress nor oto change the setting.
FPress MENU/OK to confirm the setting.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MENU
Setting the menu (➝p.126)
Erasing the images (
ERASE)
Erasing all frames (ALL FRAMES)
Use this mode to erase unnecessary images to have
ample free space on the memory card.
ERASE AALL OK?
IT MAY TAKKE A WHILE
Erasing one frame at a time (FRAME)
ERASE OK?
YES
CANCEL
A
Press MENU/OK to erase all the frames
(files).
YES
CANCEL
F
MEMO
APress por qto select the erasing frame
Press DISP/BACK to cancel
erasing of all the frames
(file).
P
(files). Some frames (files) not
already erased may be saved.
BPress MENU/OK to erase the currently
displayed frame (file).
MEMO
CANCEL
To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.
MEMO
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➝p.132).
CAUTION
Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.
CAUTION
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MENU
Setting the menu (➝p.126)
DPOF set frame
PRINT ORDER (DPOF))
WITH DATE / WITHOUT DATE
(
Selecting [WITH DATEE], Eappears on the screen
and the date will be imprinted on your prints.
You can specify the image, number of prints, with or
without date of printing with a DPOF-compatible printer.
(
)
PRINT ORDER DPOF
DPOF 00009
:
PLAYBACK MENU
Total number of prints
Setting for that frame
ERASE
PRINT ORDEE
WITH DATE
PROTECT
SHEETS
WITHOUUT DATE
01
SLIDEE SHOW
RESET ALL
FRAME
SET
LCD BRIGGHT
CROPPING
APress por qto display the frame (file)
[WITH DATEE] The date will be imprinted on your
prints.
for specifying DPOF setting.
[WITHOUT DATE] The date will not be imprinted on your
prints.
BPress nor oto set a value.
Select number of desired prints from 0 to
99.
[RESET ALL]
All DPOF settings will be canceled.
For frames (files) that you do not want
printed, set the number of prints to 0
(zero).
To specify more DPOF settings, repeat steps Aand B.
CAlways press MENU/OK after the settings
are completed.
Pressing DISP/BACK cancels those
settings.
DPress MENU/OK again. The total number
of prints appears on the screen.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.126)
MEMO
MEMO
• When DPOF settings were specified on another
camera.
To cancel DPOF setting
APress MENU/OK to open the [PLAYBACK MENU] and
press nor oto select [
BPress q.
PRINT ORDER (DPOF)].
RESET DPPOF OK?
CPress nor oto select [WITH DATE E] or
[WITHOUT DATE] and press MENU/OK to display the
print order screen.
DPress por qto select the frame (file) with the DPOF
setting you want to cancel.
EPress oto set the number of prints to 0 (zero).
YES
NO
A
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
[RESET DPOF OK?] appears.
To cancel the DPOF setting for another frame (file),
repeat steps Dand E.
Always press MENU/OK to complete the settings.
• RESET ALL (➝p.130)
F
Pressing MENU/OK cancels all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
• Prints of up to 999 frames (files) can be ordered on the
same memory card.
P
• DPOF settings cannot be specified for CCD-RAW data.
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the [WITH DATE E] setting, the date
is imprinted on your shots using the print service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera other than FinePix
S5 Pro may not be specified DPOF settings.
Continued Q
129
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MENU
Setting the menu (➝p.126)
RESET ALL
To cancel all DPOF settings:
RESET DPPOF OK?
YES
CANCEL
Select [RESET ALL] in the [PLAY BACK MENU]
(➝p.128).
Press MENU/OK.
MEMO
100-0001
MASTER
MIN
MAX
uappears on the screen during playback when the
image has specified DPOF settings.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.126)
ZuPRINT ORDER (DPOF)
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications
for images shot using a digital camera on media such as a memory card. The recorded specifications include
information on which frames are to be printed.
Some printers do not support date and time imprinting or specification of the number of prints.
*
The warnings shown below may appear while specifying the prints.
*
A
“DPOF SPECIFIED. ERASE OK ?”
“DPOF SPECIFIED. ERASE ALL OK ?” (➝p.127)
When erasing the image, the DPOF setting for that image is deleted at the same time.
F
“RESET DPOF OK ?” (➝p.129)
When inserting an memory card that contains images specified for printing by another camera, those print specifications are all reset
and replaced by the new print specifications.
P
[DPOF FILE ERROR] (➝p.215)
Up to 999 images can be specified on the same memory card.
MEMO
When [ON] is set for the [QUICK PREVIEW DATA] under [
SHOOTING] in the [SET UP] menu, images may not print properly.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MENU
Setting the menu (➝p.126)
Protecting the images
PROTECT)
SET ALL
(
SET ALLL OK?
IT MAY TAKKE A WHILE
Use this mode to prevent frames (files) from being
accidentally erased. Your camera calls images “frames”.
FRAME SET / RESET
To protect or unprotect only the selected frame (file):
YES
CANCEL
PROTECT OK?
UNPROTEECT OK?
Press MENU/OK to protect all the frames
(files).
RESET ALL
YES
CANCEL
YES
CANCEL
Unprotected
Protected (Fdisplayed)
RESET AALL OK?
IT MAY TAKKE A WHILE
APress por qto select the protecting/
unprotecting frame (file).
BPress MENU/OK to protect/unprotect the
currently displayed frame (file).
YES
CANCEL
Unprotected: protecting frame (file)
Protected: unprotecting frame (file)
Press MENU/OK to unprotect all the frames
(files).
To protect another frame (file), repeat steps Aand B.
When protecting frames (files) is completed, press DISP/
BACK.
132
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.126)
MEMO
Setting automatic playback
SLIDE SHOW)
To stop the procedure midway
(
Use this mode to playback photographed images
continuously. You can select type of image transition.
PLAYBACK MENU
CANCEL
ERASE
NORMAL
NORMAL
A
FADE-IN
FADE-IN
If the images are very large, protecting or unprotecting all
the frames (files) may take some time.
If you want to take a picture during the procedure, press
DISP/BACK.
SLIDEE SHOW
LCD BRIGGHTNES
MULTIPLE
CROPPING
F
CAUTION
MEMO
Formatting the memory card erases all the frames (files),
• To interrupt automatic playback, press MENU/OK.
• Press por qto advance or go back through the
images when selecting [NORMAL] and [FADE-IN].
• The auto power save function (➝p.181) does not
operate during playback.
P
including protected frames (files) (➝p.179).
• Press DISP/BACK once during playback to display on-
screen help.
• Images shot by FinePix S5 Pro are played back with
faces zoomed in when [NORMAL
IN ] is selected.
] or [FADE-
133
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MENU
Setting the menu (➝p.126)
Increasing monitor brightness
LCD BRIGHTNESS)
Cropping the images
( CROPPING)
(
Use this function to adjust the screen brightness.
Use this mode to crop the desired part of the
photographed image.
LCD BRIGGHTNESS
1 Select the menu.
APress por qto select the cropping
frame (file).
0
SET
CANCEL
BPress MENU/OK to open the [PLAYBACK
MENU].
APress nor oto adjust the screen
brightness.
The indicator moves to the + to display the
screen brightly or to the – to darken the
screen.
CPress nor oto select [ CROPPING].
DPress q.
BPress MENU/OK to confirm the setting.
MEMO
While checking shooting results or playing back images,
the LCD monitor backlight can be brightened temporarily
by pressing the center of the multi-selector.
134
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.126)
2 Specify cropping part of an image.
CPress n, o, p, or qto select cropping
part of the image.
obutton
n button
(Zoom in)
(Zoom out)
CROPPING
CROPPING
MEMO
Press wto return to the zoom setting.
DPress MENU/OK.
REC OK?
PANNING
YES
PANNING
YES
A
CANCEL
CANCEL
Zoom bar
F
APress n or oto zoom in or out on an
image.
P
REC
CANCEL
MEMO
3 Record the image.
Press DISP/BACK to return to single-frame playback.
Check the saved image size and press
MENU/OK.
CROPPING
The cropped image is added separately as
the last numbered file.
Navigation screen
(Current displayed image)
MEMO
ZOOM
YES
CANCEL
The image size after cropping is
3024x2016.
2304x1536 or
BPress wto move to another part of the
image.
Continued Q
135
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MENU
Setting the menu (➝p.126)
CAUTION
• The image cannot be cropped if:
- The image was originally recorded with the
[
2304x1536] selected for the [RECORDING
PIXELS].
- The image was recorded with the [RAW] selected for
the [
QUALITY].
- The free space of memory card is less then 3M.
• You may not be able to crop images that were shot with
a camera other than FinePix S5 Pro.
136
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
137
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
Using the [SET UP] menu
1 Open the [SET UP] menu.
Press SET UP to open the menu.
APress nor oto select the item.
BPress q.
Different type of screen appears
depending on selected item.
2 Select the category.
CPress nor oto change the setting.
DPress MENU/OK to confirm the setting.
SET UP
SHOOTING
DISPLAY
ROTATE IMAGE
AF
EXPOSURE
FLASHH/BKT
Help on the menu screen
Help is available when the
upper right of the screen while selecting items in menus. Press
HELP mark is displayed in the
APress nor oto select the category to
change.
and hold the
for a description of the selected item.
HELP
BPress q.
ENT
ADER/GPS
PEED
ON
OFF
3 Change the setting.
SHOOTING
HELP
IMAGE COOMMENT
ON
BARCODE REEADERR/GPS
OFF
SHOOTINGG SPEED
EXPOSURE DDELAYY MODE
SELF-TTIMER
OFF
ON
QUICK PREEVIEW DATA
138
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
List of [SET UP] menu options
Setting
Setting (Display)
Description
Page
SHOOTING
User comment of up to 45 characters (EXIF) can be entered.
IMAGE COMMENT
ON / OFF*
BCR 1 SHOT / BCR
146
147
149
149
Stores the information of a barcode reader or GPS connected to a 10-
CONTINUOUS / GPS / pin terminal as Exif information.
BARCODE READER/
GPS
OFF*
Sets the rate at which pictures can be taken in
speed) mode.
(continuous low-
SHOOTING SPEED
2 frames/s*/1 frame/s
ON / OFF*
e
Reduces camera shake due to mirror movement by delaying the shutter
release by about 0.4 s after the mirror is raised.
EXPOSURE DELAY
MODE
20 SEC /
SEC*/ 5 SEC /
SEC
10
Used when photographer wants to be in the picture such as group
photo.
SELF-TIMER
2
101
149
Sets the speed to display images on the LCD monitor. The speed will be
faster by selecting [ON]. If problems occur with playback or printing,
select [OFF].
QUICK PREVIEW
DATA
ON* / OFF
DISPLAY
IMAGE DISPLAY
Specifies how to display shot images on the LCD after shooting in order
to check the result.
CONTINUOUS / 4 SEC /
2 SEC / OFF*
149
149
150
150
ILLUMINATION
GRID DISPLAY
Keeps the LCD backlight active until the auto power save function is
triggered.
ON / OFF*
ON / OFF*
ON* / OFF
Displays grid lines in the viewfinder to aid composition.
VIEWFINDER
WARNING
Displays the warning icons in the viewfinder when the battery is low or
no memory card is inserted.
Factory default
*
139
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
ROTATE IMAGE
How to use the SET UP menu (➝p.138)
Sets for displaying vertical images in portrait orientation on the LCD.
Applies only to pictures taken with [ON] selected for [AUTO IMAGE
ROTATION] under [ROTATE IMAGE] in the [SET UP] menu.
AUTO ROTATE
PLAYBACK
ON* / OFF
ON* / OFF
150
151
Sets for recording the orientation of the camera when a picture is taken.
AUTO IMAGE
ROTATION
HAF
Controls whether photographs can be taken whenever the shutter
button is pressed or only when the camera is in focus in continuous-
servo AF.
AF-C MODE
PRIORITY
FPS RATE* / FPS
RATE+AF / FOCUS
151
AF-S MODE
PRIORITY
R:RELEASE /
F:FOCUS*
Controls whether photographs can be taken whenever the shutter
button is pressed or only when the camera is in focus in single-servo AF.
152
57
*
Sets focus frame to Normal Frame (11 Areas) or Wide Frame (7 Areas).
NORMAL(11AREAS) /
WIDE (7 AREAS)
FOCUS AREA FRAME
P1: CENTER AREA*
P1: CLOSEST
SUBJECT /
P2: CENTER AREA /
P2: CLOSEST
SUBJECT
/
Sets the type of focus area group and primary focus area.
GROUP DYNAMIC AF
152
LONG / NORMAL*
SHORT / OFF
/
Controls how autofocus adjusts to sudden large changes in the distance
to the subject.
AF LOCK-ON
153
153
154
R/A:RELEASE/AF-
Specifies whether autofocus activates when the shutter button is
pressed halfway.
AF ACTIVATION
ON*
/
A:AF-ON ONLY
Controls whether or not the active focus area is highlighted in red in the
viewfinder.
AF AREA
ILLUMINATION
AUTO* / ON / OFF
Factory default
*
140
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
Specifies using the “wrap around” function when pressing the multi-
selector in order to select the focus area.
FOCUS AREA
SELECTION
WRAP / NO WRAP*
ON* / OFF
154
154
Sets the built-in AF-assist illuminator to light for assisting focus when the
subject is poorly lit.
BILT-IN AF-ASSIST
SEXPOSURE
Specifies how to lock exposure.
R/A:RELEASE/AE-L /
A:AE-L ONLY*
AE LOCK
154
154
Activates the ISO auto control function when ISO sensitivity adjustment
is needed for optimal exposure. The maximum ISO value can be
selected. This function also can be used with the flash.
ISOAUTOCONTROL/
MAX.SENSITIVITY /
MIN.SHUTTER
SPEED
ISO AUTO CONTROL
EV CONTROL STEPS
S
1/3 EV STEP* / 1/2 EV
STEP / 1 EV STEP
Specifies the EV steps for exposure setting (includes shutter speed,
aperture and AE bracketing).
156
156
EXP COMP/FINE
TUNE
1/3 EV STEP* / 1/2 EV
STEP / 1 EV STEP
Specifies the increment for exposure compensation and fine-tuning.
Sets the exposure compensation adjustment by rotating the command
dials without using the D.
EASY EXPOSURE
COMP.
TEMPORARY / ON /
OFF*
157
157
Sets the size of diameter for metering in the center-weighted metering
mode. [AVERAGE] is the average metering value of the entire frame.
AVERAGE / 13mm /
CENTER-WEIGHT
AREA
10mm / 8mm*
6mm
/
MATRIX METERING
Optimizes exposure by choosing a standardized level for each metering
(–1 to +1) / CENTER- mode. This setting is not affected by two-button reset.
FINE TUNE
EXPOSURE
WEIGHTED (–1 to +1) /
SPOT MERERING (–1
to +1)
157
Factory default
*
Continued Q
141
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
FLASH/BKT
How to use the SET UP menu (➝p.138)
1/250*-1/60
1/250 (AUTO FP)
Sets the flash sync speed in the range of 1/250 s to 1/60 s.
FLASH SYNC SPEED
FLASH Tv SPEED
158
159
Sets the slowest shutter speed when using the flash in exposure mode
and
1/60-30
.
TTLd: TTL MODE*
/
Sets the flash control mode for the built-in flash.
Md: MANUAL MODE /
Rd:REPEATING
MODE /
BUILT-IN FLASH
159
Cd:COMMANDER
MODE
Specifies whether CLS (Creative Lighting System) compatible
Speedlights emit a modeling flash when the preview button is pressed.
MODELING FLASH
ON* / OFF
165
165
165
Sets the auto bracketing setting.
AE & FLASH*/ AE
ONLY /
d: FLASH ONLY
AUTO BRACKETING
SET
Specifies whether the camera varies shutter speed, aperture, and/or
flash level when bracketing is activated in exposure mode M.
AUTO BKT IN M
EXP.MODE
dTv* / dTv/Av / dAv /
dFLASH
N:MTR>UNDER>
OVER*/
:UNDER>MTR>
OVER
Sets the order in which pictures are recorded in auto bracketing mode.
AUTO BKT ORDER
166
166
Specifies whether to select the number of exposures and exposure
increment separately, or to use a preset combination for auto
bracketing.
MANUAL VALUE
SELECT* / PRESET
VALUE SELECT
AUTO BKT
SELECTION
Factory default
*
142
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
BUTTON ASSIGNMENT
Specifies the function performed by the AE-L/AF-L button.
AE/AF Lock / AE LOCK
ONLY* / AE LOCK
HOLD/RESET / AE
LOCK HOLD / AF
LOCK ONLY
AE-L/AF-L BUTTON
166
Specifies the function performed by the center of the multi-selector.
CENTER AF AREA*
/
CENTER BUTTON
MULTI-SELECTOR
ILLUMINATE AF AREA /
NOT USED
167
167
Specifies whether the multi-selector readies the camera (wakeup) from
standby status, or initiates autofocus.
DO NOTHING*
/
S
WAKE-UP / INITIATE
AUTOFOCUS
FV LOCK* / FV LOCK/ Specifies the function performed by the FUNC button.
LENS DATA / 1 STEP
Tv/Av / SAME AS AE-
L/AF-L / FLASH OFF /
FUNC. BUTTON
FUNCTION LOCK
BRACKETINGBURST/
MATRIX METERING /
CENTER-WEIGHTED/
SPOT METERING /
168
169
FOCUS AREA FRAME
LOCK SETTING /
FUNCTION
SELECTION /
CHANGE
Disables the command dial, [SHOOTING MENU] and [SET UP] menu
in order to avoid misuse.
PASSWORD
ROTATEDIRECTION/ Specifies the function performed by the command dials.
CHANGE MAIN/SUB /
APERTURESETTING/
MENUS AND
COMMAND DIALS
Factory default
172
PLAYBACK
*
143
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
BUTTON AND DIAL
How to use the SET UP menu (➝p.138)
DEFAULT* / HOLD
ON* / OFF
Enables using the buttons and command dials together for operations. 174
TEST-SHOOTING(NO
CARD)
Disables shooting an image without a memory card.
174
MISC.
FOCAL LENGTH (mm) Registers non-CPU lens data (focal length and maximum aperture) to
NON-CPU LENS
DATA
/ MAXIMUM
APERTURE
the camera when using a non-CPU lens.
121
175
–
Specifies the type of batteries for the MB-D200 battery pack.
MB D200 BATTERY
TYPE
–
Controls the function assigned to the AF-ON button of the optional MB-
D200 battery pack.
AF-ON FOR MB-D200
175
175
MASKING / DPI
SETTING
Specifies the aspect ratio and resolution (DPI) for an image when the
image is cut out (cropping) and saved.
FILE TAG OPTIONS
MAINTENANCE
BATTERY INFO
–
–
Displays the status of the rechargeable battery NP-150.
Displays the current camera firmware version.
176
177
FIRMWARE VERSION
–
–
Displays the number of pictures taken and the number of times the
shutter unit was replaced.
MAINTENANCE
COUNTER
177
177
Raises the mirror to allow cleaning of the low-pass filter that covers the
image sensor by pressing the shutter button.
MIRROR LOCK-UP
(CLEANING)
144
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
TIME
DATE/TIME
TIME DIFFERENCE
–
Corrects the date or time.
36
NHOME / ILOCAL Specifies the time difference settings.
177
Specifies the language used for screen display.
36
SYSTEM
–
Initializes an memory card. Select this menu to erase all the frames
(files).
FORMAT
179
179
Sets the USB interface when connecting the camera to PC.
e
MTP (PTP)* /
PC SHOOT. AUTO /
PC SHOOT.
USB MODE
FRAME NO.
FIXED
CONTINUOUS* /
Specifies whether frame numbers are assigned consecutively from
previous numbers or begin again.
180
181
RENEW
OFF/10 MIN / 5 MIN / 2 Sets the time to delay until the auto power save function operates.
AUTO POWER SAVE MIN / 1 MIN / 30 SEC /
15 SEC*
Controls the pitch of the beep that sounds when the self-timer is
counting down or the camera is focusing.
BEEP
LOW* / HIGH / OFF
NTSC / PAL
181
181
Specifies whether video output is set to NTSC or PAL.
VIDEO SYSTEM
Resets all camera settings to the factory default values except [DATE/
TIME] and [VIDEO SYSTEM] in the [SET UP] menu.
SET-UP RESET
Factory default
–
181
*
145
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
SHOOTING
2 Enter a comment.
INPUT COOMMENT
IMAGE COMMENT
Enter user comment up to 45 characters (EXIF).
12345677890_ABBCCDEFGHIJJKLMNOP
QRSTUVWXXYZ!"#$%%&'()*+,,->/:;<
= > ? @ [ ] { }
1 Activate [IMAGE COMMENT].
SHOOTING
HELP
DONE
DELETE
INSERT
IMAGE COOMMENT
ON
BARCODE REEADERR/GPS
OFF
SHOOTINGG SPEED
EXPOSURE DDELAYY MODE
SELF-TTIMER
ARotate the main-command dial to display
the desired first letter to enter.
OFF
ON
QUICK PREEVIEW DATA
BPress qto enter the second letter.
APress nor oto select [ON].
BPress q.
MEMO
• Repeat the steps A-Bto enter more letters.
• Press por qto select the letter to delete, then press
nto delete.
• To insert a letter between other letters, press por q
to select the letter after the inserting position, then press
oto insert.
MEMO
• If [ON] is selected, a comment is added to all
photographs taken.
• To not add a comment, select [OFF].
3 Exit from [IMAGE COMMENT].
Press MENU/OK.
146
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
ZConnecting to barcode reader
You can use the barcode reader with a D-sub 9-pin
connector (commercially available).Connect the barcode
reader to the camera using MC-35. See the barcode
reader instruction manual for details.
BARCODE READER/GPS
Store information from a barcode reader or GPS
connected to a 10-pin terminal as Exif information.
[BCR 1 SHOT]
Read barcode information for each shot and store it as
comment information. Pictures cannot be taken without
reading a new barcode.
Barcode reader setting
•
•
•
•
•
Baud rate: 4800 bps
Data length: 8 bit
Parity check: –
Stop bit: 1 bit
[BCR CONTINUOUS]
Store registered barcode information as comment
information in every file. To erase the registered
information, read the “barcode eraser” on this page or
delete the letters registered in the [IMAGE
COMMENT].
EOF: CR+LF
e
ZBarcode eraser
Use the barcode reader to read the barcode below to
erase the last barcode information.
[GPS]
Store information from GPS device allowing latitude,
longitude, altitude and UTC (standard universal
coordinated time) to be recorded with photographs.
[OFF]
No store barcord or GPS information is retrieved.
MEMO
When the barcode information is stored, BCD is
displayed in the control panel.
Continued Q
147
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
ZUsing a GPS Unit
When the camera establishes communication with a GPS
device, a
icon will be displayed in the control panel.
Garmin and Magellan GPS units that conform to version
2.01 of the National Marine Electronics Association
NMEA0183 data format can be connected to the
camera’s ten-pin remote terminal using an MC-35 GPS
adapter cord (available separately), allowing information
on the camera’s current position to be recorded when
photographs are taken. Operation has been confirmed
with the following devices:
The exposure meters will not turn off while this icon is
displayed. Photo information for pictures taken while the
icon is displayed will include an additional page
recording the current latitude, longitude, altitude, and
Coordinated Universal Time (UTC). If no data is received
from the GPS unit for two seconds, the
icon will clear
from the display and the camera will stop recording GPS
information. Also, the auto power save function will not be
performed while the camera is communicating with a GPS
device.
• Garmin eTrex series equipped with a PC interface cable
connector
• Magellan SporTrak series equipped with a PC interface
cable connector
These devices connect to the MC-35 using a cable with a
D-sub 9-pin connector provided by the manufacturer of
the GPS device. See the MC-35 instruction manual for
details. Before turning the camera on, set the GPS device
to NMEA mode (4800 baud).
MEMO
• UTC data is provided by the GPS device and is
independent of the camera clock.
• GPS data is only recorded when the
displayed. Confirm that the icon is displayed in the
control panel before shooting. A flashing icon
indicates that the GPS device is searching for a signal;
icon is
pictures taken while the
include GPS data.
icon is flashing will not
CAUTION
• When attaching the GPS device, be sure to turn the
GPS device OFF.
• When attaching the GPS device, if [BARCODE
READER/GPS] is set to [BCR 1 SHOT] or [BCR
CONTINUOUS], the GPS device cannot be connected.
Briefly turn the camera off and set to [GPS].
148
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
DISPLAY
SHOOTING SPEED
Choose the rate (2 frames/s or 1 frame/s) at which
pictures can be taken in continuous low-speed mode.
IMAGE DISPLAY
Use this setting to specify how to display images on the
LCD after shooting in order to check the result.
MEMO
The frame advance rate may drop at slow shutter speeds
[CONTINUOUS]
and at [
D-RANGE] setting other than [100% (STD)].
The results are always displayed after you shoot. Then
images are automatically recorded.
Press the shutter button or MENU/OK to take another
picture.
[4 SEC], [2 SEC]
The image appears for about 4 or 2 seconds and is
then recorded.
EXPOSURE DELAY MODE
Select [ON] to delay shutter release until about 0.4 s after
the shutter button is pressed, reducing camera shake in
situations in which the least camera movement could
result in blurred photographs (for example, microscope
photography).
e
[OFF]
The photographed image is automatically recorded
without being displayed.
SELF-TIMER
See p.101 for details.
ILLUMINATION
QUICK PREVIEW DATA
This option controls the control panel backlight (LCD
illuminator).
Normally, select [ON] to playback images quickly in the
LCD monitor (or [OFF] to playback images slowly). With
any software application, If you encounter some
difficulties with playback or printing of images with [ON]
selected, select [OFF].
[OFF]
Control panel illuminates only while power switch is
rotated to
[ON]
position.
Backlight stays lit (note that this increases battery
drain).
149
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
ROTATE IMAGE
GRID DISPLAY
Displays grid lines in the viewfinder to aid composition.
(➝p.22).
AUTO ROTATE PLAYBACK
Choose whether photographs taken in “tall” (portrait)
orientation are automatically rotated for display in the
monitor.
[ON]
Displays grid lines in the viewfinder.
[OFF]
Grid lines are not displayed in the viewfinder.
[ON]
“Tall” (portrait) orientation photos taken with [ON]
selected for [AUTO IMAGE ROTATION] are displayed
in tall orientation during playback (tall orientation
images are displayed at 2/3 size of other images to fit
monitor).
VIEWFINDER WARNING
Select [ON] (the default option) to display a warning in the
viewfinder. No warning is displayed when [OFF] is
selected; before shooting, check indicators in the control
panel.
[OFF]
“Tall” photos are displayed in “wide” (landscape)
orientation.
[ON]
Displays a warning in the viewfinder.
[OFF]
Warnings are not displayed in the viewfinder.
Displayed when battery is low.
Displayed when no memory card is inserted.
150
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
HAF
AUTO IMAGE ROTATION
Photographs taken while [ON] (the default option) is
selected contain information on camera orientation,
allowing them to be rotated automatically during playback
(➝p.50) or when viewed in attached software. The
following orientations are recorded:
AF-C MODE PRIORITY
This option controls whether photographs can be taken
whenever the shutter button is pressed (release priority)
or only when the camera is in focus (focus priority) in
continuous-servo AF.
[FPS RATE]
Photos can be taken whenever shutter button is
pressed.
[FPS RATE+AF]
Landscape
(wide)
Camera rotated
90° clockwise
Camerarotated
90° counter-
clockwise
S
Photos can be taken even when camera is not in focus.
In continuous mode, frame rate slows for improved
focus if subject is dark or low contrast.
[FOCUS]
orientation
Photos can only be taken when in-focus indicator (l)
is displayed. Note that focus does not lock when in-
focus indicator is displayed.
MEMO
• Camera orientation is not recorded when [OFF] is
selected. Choose this option when taking photographs
with the lens pointing up or down.
• In continuous mode (➝p.66), orientation recorded for
first shot applies to all images in same burst, even if
camera orientation is changed during shooting.
151
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
AF-S MODE PRIORITY
GROUP DYNAMIC AF
This option controls whether photographs can be taken
only when the camera is in focus (focus priority) or
whenever the shutter button is pressed (release priority)
in single-servo AF. Regardless of the setting chosen,
focus will lock when the in-focus indicator (l) is
displayed.
This option controls how focus areas are grouped in
group dynamic-AF (➝p.56) and whether the camera
gives priority to the subject in the center focus area of the
selected group.
[P1: CENTER AREA]
[F:FOCUS]
Photos can only be taken when in-focus indicator (l)
is displayed.
[R:RELEASE]
Photos can be taken whenever shutter button is
pressed.
Top Bottom
Left
Right Center
Right Center
[P1: CLOSEST SUBJECT]
FOCUS AREA FRAME
Top Bottom
Left
See p.57 for details.
[P2: CENTER AREA]
Top Bottom Left
Right Center1*Center2*
152
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
[P2: CLOSEST SUBJECT]
Top Bottom Left
AF LOCK-ON
This option controls how autofocus adjusts to sudden
large changes in the distance to the subject.
Right Center1*Center2*
[LONG], [NORMAL], [SHORT]
The center focus-area group is selected by pressing the
center of the multi-selector once to activate the current
center focus-area group and then pressing the center of
the multi-selector to toggle between Center 1 and
Center 2. Center 2 is only available when [CENTER AF
AREA] is selected for [CENTER BUTTON] under
*
Camera waits before adjusting focus when distance to
subject changes abruptly. Prevents camera from
refocusing when subject is briefly obscured by objects
passing through frame. Select [LONG] to increase
length of time before camera refocuses, [SHORT] to
reduce.
[
BUTTON ASSIGNMENT] in the [SET UP] menu.
[OFF]
Camera immediately adjusts focus when distance to
subject changes abruptly. Use when photographing
series of subjects at varying distances in quick
succession.
e
ZCenter Area
Camera focuses on subject in center focus area of
selected group. Because camera does not have to select
focus area, less time is required for focus operation. If
subject moves out of center focus area, camera will focus
based on information from other focus areas in same
group. Center focus area of selected group is highlighted
in control panel.
AF ACTIVATION
This option controls whether both the shutter button and
the AF-ON button can be used to initiate autofocus or
whether autofocus is only initiated when the AF-ON
button is pressed.
[R/A:RELEASE/AF-ON]
ZClosest Subject
Autofocus can be performed with the AF-ON button or
by pressing shutter button halfway.
[A:AF-ON ONLY]
Autofocus can only be performed with the AF-ON
button.
Camera automatically selects focus area containing
subject closest to camera in current focus area group. If
subject moves out of selected focus area, camera will
focus based on information from other focus areas in
same group.
153
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
SEXPOSURE
AE LOCK
AF AREA ILLUMINATION
This option controls whether or not the active focus area
is highlighted in red in the viewfinder.
This option determines what controls lock exposure.
[AUTO]
Selected focus area is automatically highlighted as
needed to provide contrast with background.
[ON]
Selected focus area is always highlighted, regardless
of brightness of background. Depending on brightness
of background, selected focus area may be difficult to
see.
[R/A:RELEASE/AE-L]
Exposure can be locked by pressing the AE-L/AF-L
button or by pressing the shutter button halfway.
[A:AE-L ONLY]
Exposure can only be locked by pressing the AE-L/AF-
L button.
[OFF]
ISO AUTO CONTROL
Selected focus area is not highlighted.
If [ON] is selected for this option, the camera will automati-
cally adjust ISO sensitivity when necessary to help ensure
optimal exposure.
FOCUS AREA SELECTION
At the default setting of [NO WRAP], the focus-area
display is bounded by the outer focus areas so that, for
example, pressing the multi-selector up when the top
focus area is selected has no effect. Select [WRAP] to
allow focus-area selection to “wrap around” from top to
bottom, bottom to top, right to left, and left to right.
BILT-IN AF-ASSIST
At the default setting of [ON], the built-in AF-assist
illuminator lights to assist the focus operation when the
subject is poorly lit (➝p.64). Select [OFF] to turn the
illuminator off.
154
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
[MIN.SHUTTER SPEED]
To change the setting, select the item and press q.
Then press nor o.
[ISO AUTO CONTROL]
To change the setting, select an item and press q.
Then press nor o.
[OFF]
ISO sensitivity remains
1/250–1 SEC:
The slowest shutter speed
can be selected when [ISO
AUTO CONTROL] is
ISO AUTO CCONTROL
HELP
ISO AUTO CCONTROL
1 / 200 SEC
fixed at the selected
ISO AUTO CCONTROL
1 / 160 SEC
HELP
value.
MAX.SENSSITIVITY
1 / 125 SEC
ISO AUTO CCONTROL
MAX.SENSSITIVITY
MIN.SHUTTTER SPEED
MIN.SHUTTTER SPEED
ON
OFF
[ON]
1 / 100 SEC
1 / 80 SEC
1 / 60 SEC
activated.
If optimal exposure
cannot be achieved at
the selected ISO
sensitivity, [ISO AUTO
CONTROL] activates.
CAUTION
The maximum ISO sensitivity will be limited to the values
set in [MAX.SENSITIVITY] when [ON] is selected for the
[ISO AUTO CONTROL].
S
[MAX.SENSITIVITY]
To change the setting, select the item and press q.
Then press nor o.
200/400/800/1600:
The maximum ISO
sensitivity value can be
selected when [ISO AUTO
CONTROL] is activated.
MEMO
ISO AUTO CCONTROL
HELP
• In exposure modes
and , ISO sensitivity will be
ISO AUTO CCONTROL
MAX.SENSSITIVITY
MIN.SHUTTTER SPEED
ON
adjusted if photo would be overexposed at shutter
speed of 1/8,000 or underexposed at value selected for
[MIN.SHUTTER SPEED]. Otherwise camera adjusts
ISO sensitivity when limits of exposure metering system
are exceeded (mode ) or when optimum exposure
cannot be achieved at shutter speed and aperture
selected by user (mode ). ISO sensitivity cannot be
set to values over 1600 while this option is in effect.
• When a flash is used, ISO sensitivity will be adjusted for
the flash level.
1600
800
400
200
Continued Q
155
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
ZISO auto control indicator
EV CONTROL STEPS
When [ON] is selected, the control panel and viewfinder
show ISO-AUTO. When sensitivity is altered from the
value selected by the user, these indicators blink and the
altered value is shown in the viewfinder (the indicators do
not blink and the altered value is not shown if flash is
used).
Choose whether adjustments to shutter speed, aperture,
and bracketing are made in increments equivalent to 1/3
EV ([1/3 EV STEP], the default option), 1/2 EV ([1/2 EV
STEP]), or 1 EV ([1 EV STEP]).
EXP COMP/FINE TUNE
Choose whether adjustments to exposure compensation
and exposure fine tuning are made in increments
equivalent to 1/3 EV ([1/3 EV STEP], the default option),
1/2 EV ([1/2 EV STEP]), or 1 EV ([1 EV STEP]).
• When a flash is used, foreground subjects may be
underexposed in photos taken at slow shutter speeds,
in daylight, or against a bright background. Choose a
flash mode other than slow sync or select mode or
and choose a larger aperture.
• Note that because sensitivity is only altered from the
value selected by the user when the limits for aperture
and shutter speed are exceeded, flexible program
(mode ) has no effect on aperture or shutter speed
when the ISO-AUTO indicators are blinking.
• Images may become grainy at higher ISO settings.
• If the camera automatically adjusted the ISO sensitivity
for the image, ISO sensitivity in the photo information is
displayed in red during playback.
156
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
EASY EXPOSURE COMP.
CENTER-WEIGHT AREA
This option controls whether the Dbutton is needed to
set exposure compensation (➝p.76). Exposure
compensation can be set between -5 to +5. If [ON] is
selected, the 0 at the center of the exposure display will
blink even when exposure compensation is set to 0.
When calculating exposure, center-weighted metering
assigns the greatest weight to a circle in the center of the
frame. The diameter ( ) of this circle can be selected
from 6, 8, 10, and 13 mm (the default option is 8 mm; note
that the diameter is fixed at 8 mm when a non-CPU lens
is used, regardless of the setting selected for the [NON-
CPU LENS DATA] under [ MISC] in the [SET UP]
menu(➝p.121)).
[TEMPORARY]
Same as when [ON], except that the exposure
compensation set using the command dial is only
cancelled when the camera is turned off or the auto
power save function activates.
FINE TUNE EXPOSURE
Use this option to fine-tune the exposure value selected
by the camera. Exposure can be fine tuned separately for
each metering method by from +1 to –1 EV in steps of 1/
6 EV.
[ON]
S
Exposure compensation set by rotating main-
command dial only. The dial used depends on the
option selected for [CHANGE MAIN/SUB] under
[COMMAND DIALS] under [ BUTTON
ASSIGNMENT] in the [SET UP] menu.
1 Display the confirmation screen.
FINE TUNE EEXPOSURE
CHANGE MAIN/SUB
Exposure compensation
icon is not displayed when
exposure is altered from the
default value. Continue?
OFF
ON
E
x
P
S
A
M
Sub-command dial
Sub-command dial
Main-command dial
Sub-command dial
Main-command dial
Sub-command dial
SET
CANCEL
N / A
APress nor oto select [FINE TUNE
EXPOSURE].
[OFF]
Exposure compensation set by pressing Dbutton and
rotating main command dial.
BPress q.
157
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
FLASH/BKT
CPress MENU/OK.
FLASH SYNC SPEED
This option controls flash sync speed. Options range from
1/250 s ([1/250], the default setting) and 1/60 s ([1/60]).
2 Change the setting.
FINE TUNE EEXPOSURE
[1/250], [1/200], [1/160], [1/125], [1/100], [1/80], [1/60]
Select one of the above speeds for the flash sync.
[1/250(AUTO FP)]
To enable auto FP high-speed sync when using
Speedlights that support the Nikon Creative Lighting
System (CLS), select [1/250(AUTO FP)] (flash sync
speed will be set to 1/250 s if the built-in flash fires or
the attached Speedlight is not CLS-compatible). When
the camera shows a shutter speed of 1/250 s in
HELP
+ 5 / 6
MATRIX MEETERING
CENTER-WWEIGHTED
SPOT METTERING
(
(
(
)
)
)
+ 4 / 6 + 2 / 3
+ 3 / 6 + 1 / 2
+ 2 / 6 + 1 / 3
+ 1 / 6
0
APress nor oto select the metering to
change.
exposure mode
or , auto FP high-speed sync will
be activated if the actual shutter speed is faster than 1/
250 s.
BPress q.
ZFixing shutter speed at the flash sync speed limit
To fix shutter speed at the sync speed limit in shutter-
priority auto or manual exposure modes, select the
shutter speed after the slowest possible shutter speed (30
CPress nor oto change the setting.
DPress MENU/OK to confirm the setting.
s or
). An X will be displayed in the flash sync
indicator in the control panel and viewfinder.
158
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
FLASH Tv SPEED
BUILT-IN FLASH
This option determines the slowest shutter speed
possible when using front- or rear-curtain sync or red-eye
reduction in programmed auto or aperture-priority auto
exposure mode (regardless of the setting chosen, shutter
speeds can be as slow as 30 s in shutter-priority auto and
manual exposure modes or when the flash is set to slow
sync, slow rear-curtain sync, or red-eye reduction with
slow sync). Options range from 1/60 s to 30 s.
Choose the flash mode for the built-in flash.
[TTLd: TTL MODE]
Flash output is adjusted automatically in response to
shooting conditions.
[Md: MANUAL MODE]
Built-in flash fires at the selected output. No monitor
preflash is emitted, allowing the built-in flash to function
as a master flash for Nikon slave flash units when used
with a Nikon remote Speedlight commander such as
the SU-4.
[Rd: REPEATING MODE]
The flash fires repeatedly while the shutter is open,
producing a strobe-light effect.
[Cd: COMMANDER MODE]
Choose this option to use the built-in flash as a master
flash controlling one or more Nikon remote Speedlights
in up to two groups (A and B) using Advanced Wireless
Lighting.
Continued Q
159
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
ZSetting the repeating
ZSetting the manual flash mode
MANUALL MODE
REPEATIING MODE
1 / 4
1 / 2
OUTPUT
1 / 64
TIMES
FREQ.
FULL PPOWER
1 / 32
1 / 16
3
2 Hz
SET
CANCEL
SET
CANCEL
APress nor oto select [Md:MANUAL
APress nor oto select [Rd:REPEATING
MODE].
MODE].
BPress q.
BPress q.
CPress nor oto select the output.
DPress MENU/OK to confirm the setting.
CPress nor oto select the output.
DPress qto change next setting.
ERepeat the steps for C–Dto change the [TIMES]
MEMO
and [FREQ.] settings.
If [FULL POWER] is selected, the guide number for the
built-in flash is 13/42 (m/ft, ISO 100).
FPress MENU/OK to confirm the setting.
160
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
[OUTPUT]
Highlight flash output (expressed as fraction of full
power).
[TIMES]
Choose number of times flash fires at selected output.
Note that depending on shutter speed and option
selected for Interval, actual number of flashes may be
less than selected.
ZTimes
The number of times the flash can fire in succession is
determined by flash output.
Output
Options
available
for [Times]
1/4
1/8
1/16
1/32
1/64 1/128
[FREQ.]
Choose number of times flash fires per second.
2
3
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
4
5
6
7
8
9
10
15
20
25
30
35
Continued Q
161
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
ZSetting the commander mode
[A GRP.]
Choose flash mode for all flashes in group A.
Choose this option to use the built-in flash as a master
flash controlling one or more remote optional Speedlights
in up to two groups (A and B) using Advanced Wireless
Lighting.
TTL i-TTL mode. Menu of flash compensation values
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV.
AA Auto aperture (not available with SB-600 and SB-
R200 Speedlights). Menu of flash compensation
values will be displayed; choose value between
+3.0 and –3.0 EV in steps of 1/3 EV.
[BUILT-IN]
Choose flash mode for built-in flash (commander
flash).
TTL i-TTL mode. Menu of flash compensation values
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV. At settings other than
M
Choose flash output level for flashes in Group A
from values between full power and 1/128 power
(1/128 of full power).
0,
will be displayed in control panel and
—
Flashes in group A do not fire.
viewfinder.
M
Choose flash output level for built-in flash from
values between full power and 1/128 power (1/128
[B GRP.]
of full power).
viewfinder.
flashes in control panel and
Choose flash mode for all flashes in group B.
TTL i-TTL mode. Menu of flash compensation values
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV.
—
Built-in flash does not fire, but AF-assist illuminator
lights. Built-in flash must be raised to allow monitor
preflashes to fire. dis not displayed in control
panel flash-sync mode display.
AA Auto aperture (not available with optional SB-600
and SB-R200 Speedlights). Menu of flash
compensation values will be displayed; choose
value between +3.0 and –3.0 EV in steps of 1/3
EV.
M
Choose flash output level for flashes in group B
from values between full power and 1/128 power
(1/128 of full power).
—
Flashes in group B do not fire.
[CH]
Choose from channels 1–4. All Speedlights in both
groups must be set to same channel.
162
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
1 Set the menu.
2 Shooting.
ACompose shot and arrange Nikon Speedlights as
COMMANDDER MODE
shown below.
MODE
COMP.
0
BUILT-IN
TTL
30º or less
10m/30´ or less
60-30º
A GRP.
B GRP.
CH
TTL
TTL
3 CH
0
0
5m/16´ or less
SET
CANCEL
Camera
(built-in flash)
APress nor oto select
[Cd:COMMANDER MODE].
30º or less
5m/16´ or less
S
60-30º
Speedlight wireless remote sensor should face camera.
BPress q.
• Maximum distance between optional Speedlights and
camera is about 10m (33´) when Speedlight is
positioned in front of camera (within 30° on either side
of center line), or about 5 m (16´) when Speedlight is
30–60 ° to either side of center line.
CPress nor oto change the setting.
DPress qto go to the next setting.
BTurn all Nikon Speedlights on and set the group and
channel for all Speedlights. See Speedlight manual for
details.
Continued Q
ERepeat the steps for C–Dto change settings for
items.
FPress MENU/OK to confirm the settings.
163
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
MEMO Commander Mode
CPress flash pop-up button to raise built-in flash (note
that built-in flash must be raised even if [–] is selected
for the [MODE] under [BUILT-IN]).
• Position the sensor windows on the Nikon Speedlights
where they will pick up the monitor preflashes from the
built-in flash (take particular care when not using a
tripod).
• Be sure that direct light or strong reflections from the
Nikon Speedlights do not enter the camera lens (in TTL
mode) or the photocell on the optional Speedlight (AA
mode), as this may interfere with exposure. To prevent
the timing flashes emitted by the built-in flash from
appearing in photographs taken at short ranges, use a
low ISO sensitivity and small aperture (large f/-number)
or an Nikon SG-3IR infrared panel for the built-in flash.
An SG-3IR is required for best results with rear-curtain
sync, which produces brighter timing flashes. After
positioning the Speedlights, take a test shot and view
the results in the camera monitor.
• Although there is no limit on the number of Nikon
Speedlights that may used, the practical maximum is
three. With more than this number, the light emitted by
the other flash units will interfere with performance. All
Speedlights must be in the same group; flash
compensation (➝p.84) applies to all Speedlights. See
the Speedlight manual for more information.
DAfter confirming that camera flash-ready light and
flash-ready lights for all Speedlights are lit, frame
photograph, focus, and shoot.
• If [ON] is selected for [MODELING FLASH] under [
FLASH/BKT] in the [SET UP] menu (➝p.165), all
flashes will emit a modeling flash when the depth-of-
field preview button is pressed.
• Commander mode can also be used with FV lock
(➝p.85).
164
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
MODELING FLASH
AUTO BKT IN M EXP.MODE
At the default setting [ON], the built-in flash and Nikon
Speedlights that support the Nikon Creative Lighting
System will emit a modeling flash when the depth-of-field
preview button is pressed. Select [OFF] to disable this
feature.
This option controls what settings are affected when [AE
& FLASH] or [AE ONLY] is selected for [AUTO
BRACKETING SET] in manual exposure mode.
Option
dTv
Description
Camera varies shutter speed ([AUTO
BRACKETING SET] set to [AE ONLY]) or
shutter speed and flash level ([AUTO
BRACKETING SET] set to [AE & FLASH]).
AUTO BRACKETING SET
This option controls what settings are affected when auto
bracketing is in effect.
dTv/Av
Camera varies shutter speed and aperture
([AUTO BRACKETING SET] set to [AE
ONLY]) or shutter speed, aperture, and
flash level ([AUTO BRACKETING SET] set
to [AE & FLASH]).
[AE & FLASH]
Camera performs exposure and flash bracketing.
[AE ONLY]
Camera performs exposure bracketing only.
[d:FLASH ONLY]
Camera performs flash bracketing only.
dAv
Camera varies aperture ([AUTO
BRACKETING SET] set to [AE ONLY]) or
aperture and flash level ([AUTO
BRACKETING SET] set to [AE & FLASH]).
dFLASH
Camera varies flash level only ([AUTO
BRACKETING SET] set to [AE & FLASH]).
If no flash is attached when [ON] is selected for [ISO
AUTO CONTROL] under [ISO AUTO CONTROL] under
[SEXPOSURE] in the [SET UP] menu, camera will
vary ISO sensitivity only, regardless of the setting
selected.
Flash bracketing performed only with i-TTL or AA flash
control.
*
*
165
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
BUTTON ASSIGNMENT
AUTO BKT ORDER
This option controls the order in which bracketing is
performed.
AE-L/AF-L BUTTON
This option controls the behavior of the AE-L/AF-L button.
[N:MTR>UNDER>OVER]
Bracketing performed in order described in bracketing
program (➝p.106).
:UNDER>MTR>OVER]
Bracketing proceeds in order from lowest to highest
value.
[AE/AF Lock]
Both focus and exposure lock while the AE-L/AF-L
button is pressed.
[AE LOCK ONLY]
Exposure locks while the AE-L/AF-L button is pressed.
Focus is unaffected.
[
[AE LOCK HOLD/RESET]
AUTO BKT SELECTION
Exposure locks when the AE-L/AF-L button is pressed
and remains locked until the button is pressed again,
shutter is released or exposure meters turn off .
[AE LOCK HOLD]
Exposure locks when the AE-L/AF-L button is pressed
and remains locked until the button is pressed again or
the exposure meters turn off .
[AF LOCK ONLY]
Focus locks while the AE-L/AF-L button is pressed.
Exposure is unaffected.
This option controls how the bracketing program is
selected.
[MANUAL VALUE SELECT]
Pressing BKT button, rotate main-command dial to
select number of shots, sub-command dial to select
bracketing increment.
[PRESET VALUE SELECT]
Pressing BKT button and rotate main-command dial to
turn bracketing on and off. Pressing BKT button and
rotate sub-command dial to select number of shots and
bracketing increment.
166
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
CENTER BUTTON
MULTI-SELECTOR
This option determines what operations can be performed
by pressing the center of the multi-selector.
Press the multi-selector to ready the camera (wakeup)
from standby status after the auto power save function
was activated, or to initiate autofocus.
[CENTER AF AREA]
Pressing the center of the multi-selector selects the
center focus area or center focus area group (group
dynamic-AF). If [P2: CENTER AREA] or
[P2:CLOSEST SUBJECT] is selected for the [GROUP
DYNAMIC AF] under [H AF], the center of the multi-
selector can be used to toggle between center focus
area groups.
[DO NOTHING]
The camera will not return to ready from the standby
status when the multi-selector is pressed.
[WAKE-UP]
The camera will go to ready by pressing the multi-
selector.
[INITIATE AUTOFOCUS]
[ILLUMINATE AF AREA]
The camera will go to ready by pressing the multi-
selector and will perform autofocus while the multi-
selector is pressed (except when manual is selected
for focus mode).
e
Pressing the center of the multi-selector illuminates the
active focus area or focus area group (group dynamic-
AF) in viewfinder.*
[NOT USED]
Pressing the center of the multi-selector has no effect
when the camera is in shooting mode.*
The center of multi-selector cannot be used to toggle
between the center focus-area groups, even if [P2:
CENTER AREA] or [P2:CLOSEST SUBJECT] is
selected for the [GROUP DYNAMIC AF] under [H AF]
(➝p.152).
*
MEMO
This function cannot be performed when the focus area is
locked by the focus-selector lock.
167
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
[CENTER–WEIGHTED]
Center-weighted metering activated while FUNC.
button is pressed.
[SPOT METERING]
Spot metering activated while FUNC. button is
pressed.
FUNC. BUTTON
This option controls the function performed by the FUNC.
button.
[FV LOCK]
[FOCUS AREA FRAME]
Press FUNC. button and rotate sub-command dial to
cycle between normal and wide focus areas (➝p.57).
If built-in flash or Nikon CLS-compatible Speedlight is
used, flash value locks when FUNC. button is pressed.
Press again to cancel FV lock.
[FV LOCK/LENS DATA]
Same as above, except that if built-in flash is lowered
or Nikon CLS-compatible Speedlight is not attached,
use the FUNC. button and command dials to specify
focal length and aperture of non-CPU lenses (➝p.122,
123).
[1 STEP Tv/Av]
If FUNC. button is pressed when rotating command
dials, changes to shutter speed (exposure modes S
and M) and aperture (exposure modes A and M) are
made in increments of 1 EV.
[SAME AS AE-L/AF-L]
FUNC. button performs same functions as AE-L/AF-L
button.
[FLASH OFF]
Flash will not fire in photos taken while FUNC. button
is pressed.
[BRACKETING BURST]
While FUNC. button is pressed, all shots in exposure
or flash bracketing program will be taken each time the
shutter button is pressed. In continuous high-speed
and continuous low-speed modes, camera will repeat
bracketing burst while the shutter button is held down.
[MATRIX METERING]
Matrix metering activated while FUNC. button is
pressed.
168
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
These functions can be specified by the [SELECTED
FUNCTION]
FUNCTION LOCK
To avoid mis-use, lock the functions of the command dial,
[SHOOTING MENU] and [SET UP] menu.
• FORMAT
• ERASE
• APERTURE
• SHUTTER SPEED
• EXP.COMPENSATION • ISO
• COLOR SPACES
• FILM SIMULATION
• QUALITY
[LOCK SETTING]
Select [ALL FUNCTION], [SELECTED FUNCTION], or
[BASIC FUNCTION] for the [LOCK SETTING].
• WHITE BALANCE
• TONE/COLOR/SHARP • EXPOSURE MODE
• D-RANGE
• FLASH COMPENSATION
UNLOCK
Releases the lock for functions.
The functions to be locked by the [BASIC FUNCTION]
• All options in the [SET UP] menu (except [FUNCTION
LOCK], [FORMAT]).
ALL FUNCTION Locks the fucntions which can be
locked in [BASIC FUNCTION] and the
functions which can be specified in
[SELECTED FUNCTION].
• Auto bracketing
e
• Two-button reset
SELECTED
FUNCTION
Locks the specified functions. To
specify the functions, use [FUNCTION
SELECTION].
MEMO
• The following functions can be used even when
[FUNCTION LOCK] is set.
BASIC
FUNCTION
Locks all functions except the
functions which can be specified by
the [SELECTED FUNCTION].
- Playback (w,
)
- Release (AF-ON button, AE-L/AF-L button)
• Specify the functions using [FUNCTION SELECTION]
before setting the [SELECTED FUNCTION] under
[LOCK SETTING] (➝p.170).
[FUNCTION SELECTION]
Specifies functions to be locked when [SELECTED
FUNCTION] is selected for [LOCK SETTING].
[CHANGE PASSWORD]
Change password when [LOCK SETTING] activates.
Continued Q
169
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
ZSetting the function to be locked
ZMaking the Lock Setting
FUNCTIOON LOCK
FUNCTION SSELECCTION
HELP
LOCK SEETTING
FUNCTION SSEL
ALL FUNNCTION
CHANGE PAASS
FORMAT
ERASE
APERTURE
SHUTTERR SPEED
UNLOCK
UNLOCK
UNLOCK
UNLOCK
UNLOCK
SELECTED FUNCTION
BASIC FUUNCTION
SET
CANCEL
APress nor oto select [FUNCTION
SELECTION].
APress nor oto select [LOCK SETTING].
BPress q.
BPress q.
CPress nor oto select options for [LOCK
CPress nor oto select the function to be
SETTING].
locked.
DPress qto display the confirmation
screen.
If the [INPUT PASSWORD] screen is
displayed, enter the password, then press
MENU/OK.
DPress q.
EPress MENU/OK to confirm the setting.
MEMO
If the menu is locked, it cannot be selected while the
function lock is active.
170
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
ZSetting the password
FUNCTION SSELECCTION
CHANGE PAASSWORD
LOCK
UNLOCK
FORMAT
ERASE
APERTURE
SHUTTERR SPEED
UNLOCK
UNLOCK
-
NEW PASSSWORD
- - -
0000: NO PPASSWORD
SET
CANCEL
CANCEL
EPress nor oto change the setting.
APress nor oto select [CHANGE
PASSWORD]
S
FPress pto return to selecting a function.
BPress q.
GRepeat step C–Fto change the settings of
functions.
CPress nopqto enter a new
password.
HPress MENU/OK to confirm the setting.
DPress MENU/OK to confirm the setting.
EPress MENU/OK after the confirmation
screen is displayed.
Press pto return to the [FUNCTION
LOCK] setting screen, if necessary.
Continued Q
171
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
MEMO
COMMAND DIALS
To change the password
If a password has been previously set, the following
screen is displayed in step C.
This option controls the operation of the main and sub-
command dials.
CHANGE PAASSWORD
[ROTATE DIRECTION]
- - - -
- - - -
CURRENT
PASSWORD
Controls direction of rotation for the command dial
operation when setting flexible program, shutter speed,
aperture, easy exposure compensation, exposure
mode, exposure compensation value, bracketing
increment, and flash sync mode.
NEW PASSSWORD
0000: NO PPASSWORD
CANCEL
Select [ROTATE DIRECTION] and press q on the
multi-selector. Press noto change the setting.
Enter the preset password and new password to change
the password. If you set [NEW PASSWORD] to
[0000], the password setting is canceled.
COMMANDD DIALS
HELP
ROTATE DIREECTION
NORMAL
CHANGE MAAIN/SUB
REVERSE
APERTUREE SETTING
MENUS AND PPLAYBACK
ON
[NORMAL]
Normal command dial operation.
[REVERSE]
Reverses rotation of command dials.
172
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
[APERTURE SETTING]
Controls whether changes to aperture are made using
lens aperture ring or command dials.
[CHANGE MAIN/SUB]
Exchanges functions of main and sub-command dials
when setting shutter speed and aperture.
Select [CHANGE MAIN/SUB] and press q on the
multi-selector. Press noto change the setting.
Select [APERTURE SETTING] and press q on the
multi selector. Press noto change the setting.
COMMANDD DIALS
HELP
COMMANDD DIALS
HELP
ROTATE DIREECTION
CHANGE MAAIN/SUB
APERTUREE SETTING
MENUS AND PPLAYBACK
NORMAL
ROTATE DIREECTION
CHANGE MAAIN/SUB
APERTUREE
NORMAL
OFF
ON
OFF
SUB-COMMMAND DIAL
MENUS AND
APERTURRE RING
e
[ON]
[SUB–COMMAND DIAL]
Main-command dial controls aperture,
sub-command dial controls shutter speed.
[OFF]
Aperture can only be adjusted with sub-command dial
(or main command dial if [CHANGE MAIN/SUB] is
[ON]).
Main-command dial controls shutter speed, sub-
command dial controls aperture.
[APERTURE RING]
Aperture can only be adjusted using lens aperture ring.
Camera aperture display shows aperture in increments
of 1 EV. This option is selected automatically when
non-CPU lens is attached.
MEMO
Regardless of setting chosen, the lens ring must be used
to set aperture for non-CPU lenses, while the command
dials to set aperture for type G lenses not equipped with
aperture ring.
Continued Q
173
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
[MENUS AND PLAYBACK]
Controls functions performed by command dials during
playback or when menus are displayed.
BUTTON AND DIAL
This option allows adjustments that are normally made by
pressing the MODE, D, BKT, d, ISO, QUAL, or WB
button and rotating a command dial to be made by
rotating the command dial after the button is released.
Select [MENUS AND PLAYBACK] and press qon the
multi-selector. Press noto change the setting.
COMMANDD DIALS
HELP
[DEFAULT]
Changes to settings made by rotating command dial
while button is held down.
[HOLD]
Settings can be changed by rotating command dial
after button is released. To exit, press button again,
press the shutter button halfway, or wait for about 20 s.
ROTATE DIREECTION
CHANGE MAAIN/SUB
APERTUREE SETTING
MENUS AND PPLAYBACK
NORMAL
OFF
SUB
ON
OFF
[ON]
Main-command dial performs same function as
pressing multi-selector left or right. Sub-command dial
performs same function as pressing multi-selector up
or down. Note that this option has no effect on the roles
played by the command dials during playback zoom.
[OFF]
TEST-SHOOTING (NO CARD)
This option can be used to disable the shutter release
when no memory card is inserted in the camera. The
default setting allows the shutter to be released without a
memory card inserted in the camera.
Multi-selector used to choose picture displayed,
highlight thumbnails, and navigate menus.
[OFF]
Shutter button disabled when no memory card is
inserted.
• Single-frame playback: the main-command dial is used
to display additional photo information, or to zoom in on
an image. The sub-command dial is used to choose a
picture to display.
• Multi-frame playback: the main-command dial moves
the cursor up or down, the sub-command dial moves the
cursor left or right.
[ON]
Shutter button enabled when no memory card is
inserted.
Photographs taken when no memory card is inserted
are not saved, although they will be displayed in the
LCD monitor.
• Menu navigation: main-command dial moves highlight
bar up or down.
Rotate sub-command dial to right to display sub-menu,
to left to return to previous menu.
174
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
MISC.
AF-ON FOR MB-D200
This option controls the function assigned to the AF-ON
button for the optional MB-D200 battery pack.
NON-CPU LENS DATA
See p.121 for details.
FILE TAG OPTIONS
Sets the data (such as tag information) which is effective
when the saved image is used with an application.
MB-D200 BATTERY TYPE
To ensure that the camera functions as expected when
AA batteries are used in the Nikon MB-D200 battery pack,
match the option selected in this menu to the type of
battery inserted in the battery pack. There is no need to
adjust this option when using NP-150 batteries.
[MASKING]
Part of an image can be masked when using the
optional Hyper-Utility HS-V3 Software. Select the
optimal aspect ratio for the desired printing range. A
partial image from the range will be masked when the
image is displayed. This function is best for a
presentation of images, for example.
e
CAUTION
When using AA batteries with the Nikon MS-D200 AA
Battery Holder (supplied accessory of MB-D200), the
remaining battery level cannot be checked. In this case,
there is a possibility of shooting failure. Therefore, the
camera functions are not guaranteed when using AA
batteries. Also, the following batteries cannot be used:
- AA manganese battery
- AA NiCad battery
- AA lithium battery
The rechargeable battery, NP-150, is recommended.
Select the item and press q on the multi-selector.
Then press noto change the setting.
FILE TAGG OPTIONS
MASKINNG
OFF
DPI SETTTING
8x10
5x7
1:1
[OFF] Do not mask.
[8×10]Mask using 8x10 aspect ratio.
[5×7] Mask using 5x7 aspect ratio.
[1:1] Mask using 1x1 aspect ratio (square).
Continued Q
175
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
[DPI SETTING]
MAINTENANCE
Sets the number of pixels per inch to define the image
data in length. The set information will be recorded on
the tag information. The value can be set between 36
and 3000 DPI.
Select the item and press q on the multi-selector to
display the setting screen.
BATTERY INFO
View information on the rechargeable battery NP-150
currently inserted in the camera.
Use noto change the setting.
BATTERRY INFO
PIC. MMETER
BAT. METER
: 40
DPI SETTTING
: 97 %
: 0
CHARG.. LIFE
(0~4)
73
DPI
EXIT
SET
CANCEL
[PIC. METER]
Number of times shutter has been released with
current battery since battery was last charged. Note
that camera may sometimes release shutter without
recording photograph, for example when measuring
value for preset white balance.
[BAT. METER]
Current battery level as a percentage.
MEMO
Recommendation:
• Use the following values based on which Image Size
Setting was selected when image was taken and if the
desired print size of the short side is 8 inches (20.3 cm).
L (4256x2848): 356 DPI
M (3024x2016):252 DPI
S (2304x1536): 192 DPI
• Use the following values based on which Image Size
Setting was selected when image was taken and if the
desired print size of the short side is 5 inches (12.7 cm).
L (4256x2848): 570 DPI
[CHARG. LIFE]
Five-level display showing battery age. 0 (New)
indicates that battery performance has not been
affected; 4 (Replace) indicates that battery has
reached end of charging life and should be replaced.
M (3024x2016):403 DPI
S (2304x1536): 307 DPI
176
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
TIME
DATE/TIME
FIRMWARE VERSION
View the camera firmware version.
See p.36 for details.
MAINTENANCE COUNTER
View the number of times the shutter has been released
([NO OF PICTURE]), or how many times the shutter unit
has been replaced ([UNIT REPLACE]). [NO OF
PICTURE] is displayed in 100 unit increments.
TIME DIFFERENCE
Use this function when traveling to destinations in
different time zones. This function sets a time difference
relative to the date and time currently set. When this
setting is enabled, the specified time difference is applied
when pictures are taken.
MIRROR LOCK-UP (CLEANING)
This option is used to lock the mirror in the up position to
allow inspection or cleaning of the CCD. See “Cleaning
the CCD” (➝p.204).
e
1 Use time difference function.
DATE//TIME
DATE//TIME
TIME DIFFFERENCE
HOME
LOCAL
Press nor oto change between [N
HOME] and [ILOCAL].
To set the time difference, select [ILOCAL].
[NHOME] Your home time zone
[I LOCAL]Your destination time zone
Continued Q
177
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
CHECK
2 Move to [TIME DIFFERENCE] screen.
Available time setting
–23:45 to +23:45 (in 15-minute increments)
DATE//TIME
MEMO
DATE//TIME
TIME DIFFFERENCE
HOME
In the time difference
LOCAL
setting, when you change to
the shooting mode, Iand
the date is displayed for 3
seconds. Also, the date
display turns yellow.
1 / 2 90 / 2 0 0 7 1 1 : 0 0 A M
Press q.
3 Set time difference.
CHECK
Upon returning from a trip, always change the time
difference setting back to [NHOME] and then check the
date and time again.
TIME DIFFFERENCE
1 / 20 // 2007
1 / 20 // 2007
10:00 AM
10:00 AM
See p.36 for details.
SET
CANCEL
APress por qto select +/–, hour, and
minute.
BPress nor oto change the setting.
CAlways press MENU/OK after the settings
are completed.
178
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
SYSTEM
FORMAT
Initialize (format) the memory card for use with the
camera.
USB MODE
Before connecting the camera to a computer via USB
(➝p.194), select the appropriate USB option as
determined by the computer operating system.
[
MTP(PTP)]
Normally selected. Select [MTP(PTP)] to send pictures
to the PC or to use PictBridge. The camera can be
safely detached without eject operation from the PC.
PC SHOOT. AUTO]
Use to control the camera from the PC. The camera
operates in PC shooting mode when connected to the
PC with the USB cable. When not connected to the PC,
the camera operates stand-alone.
FORMAT
FORMAAT OK?
ERASE ALLL DATA
[
OK
CANCEL
SET
e
[
PC SHOOT. FIXED]
Use to control the camera from the PC. The camera
only operates from the PC and does not operate stand-
alone.
APress nor oto select OK.
Select [PC SHOOT. FIXED] to use only for operating
camera via PC.
BPress MENU/OK to initialize the memory
card.
CAUTION
• The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or
another media before formatting your memory card.
• Do not open the battery cover or slot cover during
formatting, as formatting will be interrupted.
179
Download from Www.Somanuals.com. All Manuals Search And Download.
USET UP
How to use the SET UP menu (➝p.138)
CHECK
FRAME NO.
Frame number
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
100 - 0001
File number
<CONTINUOUS> <RENEW>
A
Directory number
The last 4 digits of the 7-digit number in the top right
corner of the screen are the file numbers, while the
first 3 digits show the directory number.
B
Formatted memory card used for both A and B.
*
MEMO
[CONTINUOUS]
Pictures are stored beginning from the highest file
number stored on the last memory card used.
• Setting this function to [CONTINUOUS] makes file
management easier as it makes sure that file names
are not duplicated when images are downloaded to a
PC.
• When the camera settings are [SET-UP RESET]
(➝p.181), the frame number setting ([CONTINUOUS]
or [RENEW]) is changed to [CONTINUOUS] and the
frame number itself does not return to 0001.
• In [CONTINUOUS] setting, images are stored
beginning from the highest file number on the current
memory card when the memory card already contains
image files with file numbers higher than the highest file
number on the last memory card.
[RENEW]
Pictures are stored on each memory card beginning
with a file number 0001.
Each image will be numbered consecutively from the
last number used. So when recorded images in the
memory card are erased, the number of the erased
frame will not be used again. Even erasing all frames
in the memory card will not return the number to 0001.
• The displayed frame number may differ for images
photographed on other cameras.
180
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the SET UP menu (➝p.138)
AUTO POWER SAVE
BEEP
When this function is active and the camera remains
unused for a pre-determined amount of time (15sec/
30sec/1min/2min/5min/10min), the camera automatically
shuts down (standby status). The viewfinder display, the
aperture and shutter speed indicators in the control panel
will turn off in standby status.
Controls the pitch of the beep that sounds when the self-
timer is counting down or the camera is focusing.
[LOW] Low pitch beep
[HIGH] High pitch beep
[OFF] No beep
Use this function when you want to get the maximum
possible running time from your battery.
MEMO
When [LOW] or [HIGH] is selected, beep indicator is
displayed in the control panel.
CAUTION
The auto power save function is disabled during a slide
show (➝p.133), when a printer or a PC is connected
(➝p.183, 194), and when the AC power adapter is being
used.
S
VIDEO SYSTEM
Specifies whether video output is set to [NTSC] or [PAL].
SET-UP RESET
MEMO
Press wor the shutter button halfway to return the
camera back to ready status.
Returns all camera settings (other than [] PRESET
CUSTOM], [DATE/TIME], [
] and [VIDEO
SYSTEM]) to their factory default values.
181
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV
For easier viewing, you can connect to a TV so the images can be displayed on a larger screen.
Plug the Video cable (included)
into the VIDEO OUT (Video
output) socket of the camera.
To terminals
Video (yellow)
Plug the other end of the cable into the
video input socket on the TV.
VIDEO OUT socket
CAUTION
MEMO
• Plug the Video cable (included) and the AC power
adapter correctly and push them in each terminal.
• See p.210 for the information of the AC power adapter.
• When connecting the Video cable (included) to TV, the
camera’s screen is turned off.
• Use the AC-135VN (sold separately) when FinePix S5
Pro is connected to a TV for long periods.
182
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Camera Directly to Printer — PictBridge Function
When a printer that supports PictBridge is
available, images can be printed by
Connecting to a printer
connecting the camera directly to the
PictBridge-compatible printer without a PC.
AConnect the camera to your printer using the USB
cable (mini-B).
Before connecting to a printer
SYSTEM
HELP
FORMAT
(
)
MTP PTP
USB MODE
FRAME NO.
AUTO POOWEOF
BEEP
PC SHOOTT. AUTO
PC SHOOTT. FIXED
;USB socket
LOW
NTSC
VIDEO SSYSTEM
a
ASelect [
MTP (PTP)] for [USB MODE] under
[
SYSTEM] in the [SET UP] menu.
See “Using the [SET UP] menu” (➝p.138).
B Turn the power switch to OFF to turn the camera off.
MEMO
Use the AC-135VN (sold separately) when FinePix S5
Pro is connected to a printer.
Continued Q
183
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Camera Directly to Printer — PictBridge Function
BConnect the camera to a printer and turn the printer on.
Set the Power switch to ON to turn the camera on.
Specifying images for printing
(PRINT WITH DATE / PRINT
WITHOUT DATE)
[
USB] appears on
USB
the screen.
PICTBRRIDGE
TOTAL :: 00002
SHEETS
02
CThe following screen appears on the screen after a
moment.
FRAME
OK
SET
“Specifying images for
printing”
➝p.184
APress por qto display the frame (file)
for specifying PRINT setting.
PICTBRRIDGE
TOTAL : 00000
“Printing with DPOF setting”
➝p.185
B
Press
n
or
o
to set a value.
SHEETS
00
Up to 99 sheets are printed.
FRAME
OK
SET
To specify more PRINT settings, repeat steps Aand B.
MEMO
Depending on the printer, some functions are disabled.
CPress MENU/OK to display the
confirmation screen.
184
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing with DPOF setting
(uPRINT DPOF)
PRINT THESSE FRAMES
:
TOTAL 9 SHEETS
PICTBRRIDGE
PRINT WIITH DATE
PRINT WITHHOUT DATE
PRINTT DPOF
YES
CANCEL
DPress MENU/OK again to download the
data to the printer and start printing the
specified number of prints.
MEMO
APress DISP/BACK to open the menu.
Even if MENU/OK is pressed with the total number of images
set at 0 (zero), the confirmation message appears for one
print of the displayed image. Press MENU/OK again to start
printing.
C
BPress nor oto select [uPRINT DPOF].
MEMO Printing with date
CPress MENU/OK to display the
APress DISP/BACK to
display the setting
confirmation screen.
PICTBRRIDGE
display.
PRINT WITH DATE
PRINT WITHOUT DATE
PRINTT DPOF
Continued Q
BPress nor oto select
[PRINT WITH
DATEE].
CPress MENU/OK.
CAUTION
[PRINT WITH DATEE] is not available when the camera
is connected to a printer that does not support date
printing.
185
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Camera Directly to Printer — PictBridge Function
MEMO
PRINT DPPOF OK?
:
TOTAL 9 SHEETS
PRINTING
YES
CANCEL
CANCEL
DPress MENU/OK again to download the
data to the printer and start printing the
specified frames (files) continuously.
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
CHECK
When printing stops midway, briefly turn the camera off
and then on again.
To select [uPRINT DPOF], the DPOF settings must be
specified on FinePix S5 Pro beforehand (➝p.128).
CAUTION
Disconnecting the printer
ACheck that [PRINTING] is not displayed on the
camera’s screen.
Even when [WITH DATEE] is specified in the DPOF
settings (➝p.128), the date is not inserted on printers that
do not support date printing.
BTurn the camera off. Unplug the USB cable (mini-B).
186
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
• In PictBridge function, images photographed anything
other than a digital camera may not print properly.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• For best result, please connect the AC Power Adapter
AC-135VN (sold separately) to your camera while using
with a PictBridge printer.
• Use memory card that was formatted on FinePix S5
Pro.
• Movies and CCD-RAW images cannot be printed.
• Images photographed with a camera other than the
FinePix S5 Pro may not print properly.
• When [ON] is set for the [QUICK PREVIEW DATA]
under [ SHOOTING] in the [SET UP] menu, images
may not print properly.
a
187
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation on a Windows PC
Pre-installation checklist
ZHardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Windows 98 SE
Windows Millennium Edition (Windows Me)
1
2
3
Operating System
Windows 2000 Professional*
*
*
2
Windows XP Home Edition
Windows XP Professional
*
2
*
CPU
RAM
200 MHz Pentium minimum
64 MB minimum
Minimum 768 MB when converting CCD-RAW Data
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Minimum 2 GB when converting CCD-RAW Data
Hard disk space
Display
(must specified in the OS as virtual memory or paging files)
800 × 600 pixels or better, 16-bit color or better
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
4
Internet connection
*
*1 Models with one of the above operating systems pre-installed.
*2 When you install the software, login using a system administrator account (e.g. “Administrator”).
*3 Requires Service Pack4 when converting CCD-RAW Data.
*4 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
188
Download from Www.Somanuals.com. All Manuals Search And Download.
ZRecommended system
Operating System
CPU
Windows XP
2 GHz Pentium 4 or better recommended
512 MB or better recommended
2 GB or better
RAM
Hard disk space
Display
1024 × 768 pixels or better, Highest (32 bit)
Broadband (ADSL, FTTH, CATV, etc.)
Internet connection
CAUTION
• Connect the camera directly to the PC using the USB cable (mini-B). The software may not operate correctly when you use an
extension cable or connect the camera via a USB hub.
• When your PC has more than one USB port, the camera can be connected to either port.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
• Windows 95, Windows 98 and Windows NT cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service
are deleted from your PC. Click the [Register now] button, enter your registered user ID and password and download the menu
again.
S
Continued Q
189
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation on a Windows PC
Do not connect the camera to your PC
until the software installation is
completed.
Installing other applications
You may see messages for installing ImageMixer VCD2 LE for
FinePix. Install this application as directed by the on-screen
instructions.
1 Install FinePixViewer as instructed in the
Quick start guide.
2 Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
Launching the installer manually
ADouble-click the “My Computer” icon.
Windows XP users should click “My Computer” in the “Start”
menu.
*
BRight-click “FINEPIX” (CD-ROM drive) in the “My
Computer” window and select “Open”.
CDouble-click “SETUP” or “SETUP.exe” in the CD-ROM
window.
CAUTION
• If the latest version is already installed, this window
does not appear.
• Do not remove the CD-ROM during this procedure.
3 After restarting the PC, a message appears
stating “Installation of the FinePixViewer
has been completed”.
The way file names are displayed differs as described below
*
depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
190
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation on a Mac OS X
Pre-installation checklist
ZHardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
2
Power Macintosh G3 2, PowerBook G3
Power Macintosh G4, iMac, iBook,
,
*
*
1
Compatible Mac
*
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, or Mac mini
Operating System
RAM
Mac OS X (compatible with version 10.3.9 to 10.4.8)
192 MB minimum
Minimum 768 MB when converting CCD-RAW Data
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Minimum 2 GB when converting CCD-RAW Data (required on the system disk)
Hard disk space
800 × 600 pixels or better, at least 32,000 colors
Display
o
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
3
Internet connection
*
*
*
1 PowerPC, Intel processor loaded
2 Models with a USB port as a standard feature
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not operate correctly if you use an
extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
191
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation on a Mac OS X
CAUTION
1 Turn your Macintosh on and start up Mac
For more information on what is installed, click the [Read
Me First] button and [Using FinePixViewer] button.
OS X. Do not launch any other applications.
2 When the bundled CD-ROM is loaded into
the CD-ROM drive, the “FinePix” icon
appears. Double-click the “FinePix” icon to
open the “FinePix” volume window.
5 The “Authenticate” dialog appears.
Enter the name and password for the
administrator account and then click the
[OK] button.*
The administrator account is the user account used for
Mac OS X installation and you can confirm the user
account in the Accounts dialog in the System
Preferences.
*
3 Double-click on “Installer for MacOSX”.
4 The Installer setup dialog appears. Click the
[Installing FinePixViewer] button.
6 The “License” dialog appears. Read the
agreement carefully and then, if you agree
to the terms of the Agreement, click the
[Accept] button.
7 The “Read me” dialog appears. Click the
[Continue] button.
8 The “FinePixInstallOSX” window appears.
Click the [Install] button to install
FinePixViewer.
192
Download from Www.Somanuals.com. All Manuals Search And Download.
9 The ImageMixer VCD2 LE for FinePix
installer automatically starts up and a
window showing the installation progress
appears (Installation may take several
minutes).
13Select “Other...” from “When a camera is
connected, open”.
14Select “FPVBridge” from “FinePixViewer”
folder in the “Applications” folder and click
the [Open] button.
10 The “FinePixViewer installation completed”
message dialog appears. Then click exit
button and close it.
CAUTION
When Safari is used as the Web browser, a message may
be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make
Safari the active application and then select “Quit Safari”
in the “Safari” menu to shut down Safari.
15Select “Quit Image Capture” menu in the
11 Launch “Image Capture” from the
S
“Image Capture” menu.
“Applications” folder.
12 Change the Image Capture settings.
Select “Preferences...” from the “Image
Capture” menu.
193
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
CSelect [ MTP(PTP)] for [USB MODE] under
SYSTEM] in the [SET UP] menu.
[
See “Using the [SET UP] menu” (➝p.138).
SYSTEM
MEMO
HELP
FORMAT
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
(
)
MTP PTP
USB MODE
FRAME NO.
AUTO POOWER OF
BEEP
PC SHOOTT. AUTO
PC SHOOTT. FIXED
LOW
NTSC
Refer to Software
VIDEO SSYSTEM
Installation (➝p.188, 191)
the first time you connect
the camera to your PC.
Install the software first. Do
DTurn the power switch to OFF to turn the camera off.
EConnect the camera to your PC using the USB cable
not connect the camera to
the PC before installing all
(Software for FinePix CX)
the software.
(mini-B).
CD-ROM
AInsert the memory card with images into the camera
(➝p.34).
CAUTION
• Do not format the memory card in the camera on the
PC.
;USB socket
• Use the memory card with images taken by a FUJIFILM
Digital camera.
• When connecting to a PC, if the memory card contains
large images, connection or transmission may take time
or images may not be stored.
BTurn the power switch to ON to turn the camera on.
FSet the Power switch to ON to turn the camera on.
194
Download from Www.Somanuals.com. All Manuals Search And Download.
• If the camera communicates with the PC successfully,
will be displayed in the control panel and viewfinder.
Photographs can be transferred to the computer as
described in the manual for the supplied software (on
CD).
CAUTION
• FinePix S5 Pro is compatible with MTP/PTP (Picture
Transfer Protocol). A MTP/PTP-compatible camera is a
camera which can recognize the PC and printer
automatically when connected.
• Always use the FUJIFILM AC Power Adapter AC-
135VN (sold separately). If the camera suddenly loses
power during data exchange, the memory card could be
damaged.
• Do not disconnect the USB cable (mini-B) when the
camera is communicating with a PC. If disconnecting
the USB cable (mini-B) during communication, the files
on the memory card may be destroyed.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable (mini-B) is connected
correctly and pushed in.
MEMO
See the manuals provided with the supplied software for
more information.
• Perform pre-arranged steps to disconnect and turn off
the camera (➝p.197).
• Auto power save is disabled during USB connection.
• Before replacing the memory card, always disconnect
the camera from the PC. See p.197 for information on
the disconnection procedure.
S
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable (mini-B), always check
that the access lamp is off.
• An image taken with CCD-RAW (➝p.93) setting is
required to be transferred to a PC using FinePixViewer.
Continued Q
195
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PC
GSet a PC.
Windows XP
Windows 98 SE / Me / 2000 Professional /
Macintosh
AThe “Found New Hardware” help message appears in
the bottom-right corner of your screen. This message
will close when the settings are completed. No action
is required.
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
CAUTION
This step is not required for subsequent connections.
• FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
BFinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button, set
the power switch to OFF to turn off the camera and then
disconnect it from the PC.
Proceed to “Using FinePixViewer” (➝p.198).
Screen for Windows 2000 Professional
*
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button, set
the power switch to OFF to turn off the camera and then
disconnect it from the PC.
196
Download from Www.Somanuals.com. All Manuals Search And Download.
ASet the Power switch to OFF to turn the camera
off.
Disconnecting the camera
2
1 Windows
BUnplug the USB cable (mini-B) from the camera.
Once the image has been saved, the window below
appears (Save Image Wizard window). To disconnect
the camera, click the [Remove] button.
;USB socket
Macintosh
S
Once the image has been saved, the window below
appears. To disconnect the camera, click the [OK]
button.
197
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PC
Using FinePixViewer
Uninstalling the software
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
Mastering FinePixViewer
For all information on FinePixViewer functions, refer to
“How to Use FinePixViewer” in the Help menu for details.
Windows
ACheck that the camera is not connected to the PC.
• What is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics,
including batch processing and ordering prints.
BQuit all currently running applications.
COpen the “My Computer” window. Then open the
“Control Panel” and double-click on “Add/Remove
Programs”.
Example: Looking up slide shows
AClick “How to Use FinePixViewer” in the FinePixViewer
Help menu.
BClick “Basic Operation” and then click “Slide Show” in
the menu that appears.
CThe “Slide Show” information appears. Press the “<<<”
key to view the previous page or the “>>>” key to view
the next page.
DThe “Add/Remove Programs Properties” window
appears. Select the software to be uninstalled
(FinePixViewer or the driver) and then click the [Add/
Remove] button.
To remove FinePixViewer
5 3
5 3
To remove the driver
software
198
Download from Www.Somanuals.com. All Manuals Search And Download.
EWhen the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
FAutomatic uninstallation begins.
When uninstallation ends, click the [OK] button.
Macintosh
Quit FinePixViewer. Then drag the installed
FinePixViewer folder to the Trash and select “Empty
Trash” in the “Finder” menu.
o
199
Download from Www.Somanuals.com. All Manuals Search And Download.
System Expansion Option
By using FinePix S5 Pro together with other optional accessories, your system can be expanded to fill a wide range of uses.
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
Power supplies
Battery Charger
Rechargeable Battery
BC-150*
NP-150*
Connecting to a TV or printer
AC adapter AC-135VN*
Video cable*
TV monitor***
Storage media, Software
PC card adapter/
Microdrive adapter***
CompactFlash***/
Microdrive***
USB
PictBridge-compatible printer***
USB cable*
Personal Computer***
Hyper-Utility HS-V3*
Hyper-Utility HS-V3 UP*
Printer***
*FinePix S5 Pro accessories, or sold separately ***Other manufacturer products
200
Download from Www.Somanuals.com. All Manuals Search And Download.
ZUsable Nikon accessories
Speedlights
Nikkor lens**
SB-800 Speedlight**
SB-600 Speedlight**
SU-800/SB-R200**
Remote terminal accessories
MC-36 Remote Cord**
Studio flash***
Sync cable**
MC-30 Remote Cord**
MC-22 Remote Cord**
SB-800/SB-600
Speedlights**
MC-21
SC-28/SC-29**
MC-22/MC-30/MC-36
Extension Cord**
MC-23 Connecting Cord**
ML-3 Modulite Control Set**
MC-25 Adapter Cord**
Barcode reader***
GPS unit***
MC-35 GPS
Adapter Cord**
Viewfinder accessories
Diopter-Adjustment Viewfinder Lenses**
Eyepiece Adapter**
DG-2 Magnifier**
A
Power supplies
DK-21M Magnifying Eyepiece**
Eyepiece cap**
MB-D200 Multi-Power Battery Pack**
i
Caution: The camera functions are not
guaranteed when using the MS-D200
AA Battery Holder (supplied accessory
of MB-D200).
Viewfinder eyepiece cup**
DR-6 Right-Angle Viewing Attachment**
**Nikon products ***Other manufacturer products
201
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories Guide
Visit the FUJIFILM web site for the latest information on camera accessories.
http://www.fujifilm.com/products/digital/index.html
Accessory availability may vary by country. Please check with your local FUJIFILM representative to confirm product
availability.
• Rechargeable Battery NP-150 (1500mAh)
NP-150 is a rechargeable lithium-ion high capacity battery.
• Battery Charger BC-150
Charges the rechargeable battery. The BC-150 reduces charging time to approx. 2 hours and
15min.
• AC Power Adapter AC-135VN
Use the AC-135VN when taking pictures or play back images for long periods or when FinePix
S5 Pro is connected to a PC.
The shape of the AC power adapter, the plug, and power outlet depend on the country.
*
• Hyper-Utility Software HS-V3
- Offers PC-based functions such as browsing (includes the Zoom in Face function*1), two-image
comparison, image sorting and organizing using a marker, as well as image analysis using a
histogram and highlight warning displays for images shot on a digital camera (*1 only the images
shot by FinePix S5 Pro).
- Allows you to specify the output image size and the processing parameters (tone curve, white
balance, sharpness, color and dynamic range*2) for CCD-RAW files and also allows you to
convert them to ordinary image files (16-bit/8-bit TIFF or Exif JPEG) (*2 compatible with FinePix
S5 Pro/S3 Pro/S20 Pro/F710/F700).
- By connecting the camera to a PC, images shot on the camera can be downloaded
automatically, or the camera can be controlled from the PC (Shoot from PC function). Compatible
with FinePix S5 Pro/S3 Pro/S2 Pro/S20 Pro.
- Provides a range of other functions for using photographed images in various ways, including
printing, contact-sheet file creation and slide shows.
- Refer to the product package for detailed information on specifications and system
requirements.
• Hyper-Utility Software HS-V3 UP
HS-V3 UP is an upgraded version of Hyper-Utility Software HS-V2.
202
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Camera Correctly
Read this information and the “Safety Notes” (➝p.238), to
make sure you use your camera correctly.
ZWhen the Camera is Not Used or is Stored for
Extended Periods of Time
If you do not intend to use the camera for a long period of
time, remove the batteries and the memory card.
ZPlaces to Avoid
Do not store or use the camera in the following types of
locations:
ZCleaning Your Camera
• In the rain or in very humid, dirty, or dusty places
• In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer
• Extremely cold places
• Places with strong vibration
• Places with smoke or steam
• Places subject to strong magnetic fields (such as near
motors, transformers, or magnets)
• In contact with chemicals such as pesticides
• Next to rubber or vinyl products
• Use a blower brush to remove any dust on the lens,
LCD monitor or viewfinder, and then gently wipe the
camera with a soft, dry cloth. If any soil remains, apply
a small amount of lens cleaning liquid to a piece of
FUJIFILM lens cleaning paper and wipe gently.
• Do not scratch hard objects against the lens, LCD
monitor or viewfinder.
• Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances or cleaning products these
items can cause damage.
ZDamaged by Water or Sand
ZUsing the Camera When Traveling
FinePix S5 Pro can be damaged on the inside and outside
by water and sand. When you are at the beach or close to
water, make sure that the camera is not damaged by
water or sand. Take care not to place the camera on a wet
surface.
When traveling overseas, do not place your camera in the
check-in baggage. Baggage can be subjected to violent
shocks, and the camera may be damaged inside or
outside.
ZDamaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the memory card. In this
event, remove the memory card and wait a short time.
203
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the CCD
This camera is equipped with a CCD photosensitive
element. This CCD is located behind the shutter screen.
If dust or other soiling attaches to the surface of the CCD
and pictures are then taken, this soiling may appear as
spots in the image, depending on the camera settings and
the type of subject. If this occurs, the CCD must be
cleaned. Because the surface of the CCD is extremely
fragile, wherever possible the camera should be returned
to an authorized FUJIFILM dealer for cleaning (for a
charge).
Checking the condition of the
CCD surface
ASelect [MIRROR LOCK-UP (CLEANING)] for the
MAINTENANCE] in the [SET UP] menu.
See “Using the [SET UP] menu” (➝p.138).
[
MIRRORR LOCK-UUP (CLEEAANING)
MIRROR LOCCK-UP OK?
Any repairs carried out by an authorized FUJIFILM dealer
to CCDs that were scratched or damaged during cleaning
by the customer will be charged to the customer. Note
that such repairs will probably involve replacing the CCD
and will be expensive.
OK
CANCEL
SET
Dust inside the camera and on the surface of the CCD
BPress nor oto select [OK]
• Before a FUJIFILM digital camera is shipped from the
factory, it is carefully checked for dust inside the camera and
on the surface of the CCD to ensure that it conforms to
FUJIFILM standards.
• Bear in mind also that some types of soiling on the CCD
surface cannot be removed even by an authorized
FUJIFILM dealer. Should this occur, you can use features
such as the despeckling function provided in the image
processing software to remedy the problem.
CPress MENU/OK.
[- - - - - -] is displayed in the
control panel.
DPress the shutter button all the way down.
The mirror will be raised and the shutter
curtain will open, and a row of dashes will
blink in the control panel.
204
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
EHold the camera so that the sun shines on the CCD
To return to normal operation without raising the
mirror, turn the camera off.
and check the surface for dust.
Starting CCD cleaning
Take great care to avoid scratching or damaging the CCD
during cleaning, as you will be responsible for the possibly
high cost of repairs (or replacement) by an authorized
FUJIFILM dealer.
AUse a blower (without a brush attached) to remove any
soiling on the CCD surface.
FIn case of surface clean
RTurn the camera off and attach the lens cap, or if
the lens is detached, attach a body cap to the camera.
In case of surface soiling
RContact a FUJIFILM dealer and request CCD
cleaning. Or see Starting CCD cleaning (➝p.205).
p
CAUTION
• Note that this option is not available at battery
i
levels less than
exposures.
or while shooting multiple
• When cleaning the camera, always use the full
charged battery or AC power adapter AC-135VN
(sold separately) to prevent camera damage
should the mirror drop or the shutter close.
• If the battery runs low while the mirror is raised, a
beep will sound and the AF-assist illuminator will
blink to warn that the shutter curtain will close and
the mirror will lower in about two minutes. End
cleaning or inspection immediately.
MEMO
Use a blower that does not have a brush attached.
Using a blower brush to clean soiling from the CCD
can scratch the CCD surface.
Continued Q
205
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the CCD
BCheck whether the dust has been removed from the
CMoisten the bottom 5 mm (0.2 in) of the Sensor swab
CCD surface.
evenly with cleaning fluid.
- The blower has removed the dust (There are no oily
marks or fingerprints).
RTurn the camera off and mount the lens or body
cap on the camera.
- There are oily marks or fingerprints left on the CCD that
cannot be removed with the blower.
RProceed to stepC.
CAUTION
When you turn the camera off, the mirror drops down
and the shutter closes at the same time. Ensure that
your fingers are not caught inside the camera.
CAUTION
Do not use the swab when it is dry or not moistened
with cleaning fluid.
ZEnsure that you have the cleaning equipment
ready
DSlowly and gently wipe using only one side of the
sensor swab just once across the full width of the CCD
from left to right.
• Cleaning swabs
Sensor Swab (Photographic Solutions, Inc.)
For information on suppliers outside Japan, visit
the web site listed below
*
(http://www.photosol.com/swabproduct.htm).
• Cleaning fluid
Anhydrous ethanol
206
Download from Www.Somanuals.com. All Manuals Search And Download.
EWipe using the other side of the swab across the full
width of the CCD from left to right once more. Do not
reuse the swab.
CAUTION
If this does not remove the soiling, repeat steps Cto
Ewith a new Sensor swab or contact an authorized
FUJIFILM dealer.
FTurn the camera off and mount the lens or body cap on
the camera.
CAUTION
• When you turn the camera off, the mirror drops
down and the shutter closes at the same time.
Take care to ensure that your fingers are not
caught inside the camera.
• Always use this procedure to clean the CCD.
Never clean the CCD in bulb shooting mode. A
current runs through the CCD in bulb shooting
mode and cleaning could cause damage.
p
i
207
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply and Battery
ZCharging the Battery
Notes on the Battery (NP-150)
• You can use the battery charger BC-150 (included) to
charge the NP-150. When charging, use the NP-150
battery adapter supplied with the BC-150.
• The NP-150 can be charged using the BC-150 Battery
Charger at ambient temperatures between 0°C and
+40°C (+32°F and +104°F). At an ambient
temperature of +23°C (+73°F), it takes approx. 135
minutes to charge a fully depleted NP-150 battery.
• You should charge the NP-150 at an ambient
temperature between +10°C and +35°C (+50°F and
+95°F). If you charge the NP-150 at a temperature
outside this range, charging takes longer because the
performance of the NP-150 is impaired.
This camera uses the rechargeable lithium-ion Battery
NP-150. Note the points below when using the
rechargeable battery. Take particular care to read the
Safety Notes to make sure that you use the battery
correctly.
When shipped, the NP-150 is not fully charged. Always
charge the NP-150 before using it.
*
• When carrying the NP-150, install it in a digital camera.
ZBattery Features
• The NP-150 gradually loses its charge even when not
used. Use a NP-150 that has been charged recently (in
the last day or two) to take pictures.
• The NP-150 does not need to be fully discharged or
• To maximize the life of the NP-150, turn the camera off
as quickly as possible when it is not being used.
• The number of available frames will be lower in cold
locations or at low temperatures. Take along a spare
fully charged NP-150.
exhausted flat before being charged.
• The NP-150 may feel warm after it has been charged or
immediately after being used. This is perfectly normal.
• Do not recharge a fully charged NP-150.
You can also increase the amount of power produced
by putting the NP-150 in your pocket or another warm
place to heat it and then loading it into the camera just
before you take a picture.
If you are using a heating pad, take care not to place the
NP-150 directly against the pad. The camera may not
operate if you use a depleted NP-150 in cold conditions.
ZBattery Life
At normal temperatures, the NP-150 can be used at least
300 times.
If the time for which the NP-150 provides power shortens
markedly, this indicates that the NP-150 has reached the
end of its effective life and should be replaced.
208
Download from Www.Somanuals.com. All Manuals Search And Download.
To make sure that you obtain optimum battery
performance, observe the following:
• Always keep the battery terminals clean.
• Do not store battery in warm or humid places. Storing
the battery for long periods in a hot location can shorten
the battery life.
• Do not split or peel outer labels of the battery.
If you use the battery for a long period, the camera
body and the battery itself will become warm. This is
normal. Use an optional AC power adapter if you are
taking pictures or viewing images for a long period of
time.
Notes on storage
The rechargeable lithium-ion battery NP-150 is both
compact and capable of storing large quantities of power.
However, if it is stored for long periods while charged, the
performance of the battery can be impaired.
• If the battery will not be used for some time, run the
battery out before storing it.
• If you do not intend to use the camera for a long period
of time, remove the battery from the camera.
• Store the battery in a cool place.
The battery should be stored in a dry location with an
ambient temperature between +15°C and +25°C (+59°F
and +77°F).
*
ZSpecifications of the included NP-150
Do not leave the battery in hot or extremely cold places.
*
Nominal voltage
Nominal capacity
Operating
DC 7.2V
1500 mAh
0°C to +40°C (+32°F to +104°F)
ZHandling the Battery
To avoid injury or damage, observe the following:
• Do not carry or store battery with metal objects such as
necklaces or hairpins.
• Do not heat the battery or throw it into a fire.
• Do not attempt to take apart or change the battery.
• Do not recharge the battery with chargers other those
specified.
temperature
Dimensions
39.5 mm × 55.8 mm × 20.9 mm
(1.6 in. × 2.2 in. × 0.8 in.)
(W × H × D)
Mass (Weight)
Approx. 80 g (2.8 oz.)
Continued Q
• Dispose of used battery promptly.
To avoid damaging the battery or shortening its life,
observe the following:
• Do not drop the battery or otherwise subject it to strong
impacts.
• Do not expose the battery to water.
209
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply and Battery
AC Power Adapter
Always use the AC power adapter AC-135VN with the
camera.
The use of an AC power adapter other than the AC-
135VN can cause damage to your digital camera.
• Use the AC power adapter for indoor use only.
• Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
• Turn off the FUJIFILM Digital camera before
disconnecting the cord from the FUJIFILM Digital
camera’s DC input terminal. To disconnect, pull out the
plug gently. Do not pull on the cord.
• Do not use the AC power adapter with any device other
than your camera.
• During use, the AC power adapter will become hot to
the touch. This is normal.
• Do not take apart the AC power adapter. Doing so could
be dangerous.
• Do not use the AC power adapter in a hot and humid
place.
• Do not subject the AC power adapter to strong shocks.
• The AC power adapter may emit a humming. This is
normal.
• If used near a radio, the AC power adapter may cause
static. If this happens, move the camera away from the
radio.
210
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the Memory Card
ZProtecting Your Data
ZUsing CompactFlash
• Images may be lost or destroyed in the following
situations. Please note that FUJIFILM assumes no
responsibility for data that is lost or destroyed.
1. Removal of the memory card or turning the power off
while the memory card is being accessed (i.e., during
record, erase, initialization, and playback operations).
2. Improper handling and use of the memory card by
the user or third party.
Contact the CompactFlash card manufacturer for
information on the CompactFlash functions, operation
details and system requirements.
Card types approved for use with the FinePix S5 Pro are
listed on the FUJIFILM website.
http://home.fujifilm.com/products/digital/
• The CompactFlash card may be hot immediately after
being used in the camera and should be handled with
care.
• Do not touch the card contact area with your fingers or
metal objects.
• Unused CompactFlash cards should be formatted
before being used.
CAUTION
Save your important data to another media (i.e., MO disk,
CD-R, hard disk, etc.).
ZHandling Memory card (all types)
ZUsing memory card with a PC
• When inserting the memory card into the camera, hold
the memory card straight as you push it in.
• Never remove the memory card or turn the camera off
during data recording or erasing (memory card
formatting) as this could be damaged to the memory
card.
• When taking pictures using a memory card that has
been used on a PC, reformat the memory card using
your camera for best quality.
• When formatting a memory card, a directory (folder) is
created. Image data is then recorded in this directory.
• Do not change or delete the directory (folder) or file
names on the memory card because this will make it
impossible to use the memory card in your camera.
• Always use the camera to erase image data on a
memory card.
• To edit image data, copy the image data to the PC and
edit the copy.
• Do not copy files other than those that will be used by
the camera.
• Do not bend, drop or otherwise subject the memory card
to strong force or shocks.
A
• Do not use or store these memory card in places with
affected by strong static electricity or electrical noise.
• Do not use or store memory card in hot humid places or
in places where they are exposed to corrosive
substances.
i
211
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Displays
Warning messages displayed in the control panel and viewfinder
Control panel
Viewfinder
Explanation
Remedy
Lens aperture ring is not locked at
minimum aperture.
Lock ring at minimum aperture (largest f/-number).
(blinks)
(blinks)
Low battery.
Ready fully-charged spare battery.
• Battery exhausted.
• Exchange with fully-charged spare battery.
• Battery cannot be used in camera.
(blinks)
(blinks)
• Battery information not available.
No lens attached, or non-CPU lens
Aperture value will be displayed if maximum aperture
attached without specifying maximum is specified.
aperture. Aperture shown in stops
from maximum aperture.
l
(blinks)
Camera unable to focus using
autofocus.
Focus manually.
–
Subject too bright; photo will be
overexposed.
• Choose lower sensitivity.
• Use optional neutral density (ND) filter.
• In exposure mode:
Increase shutter speed
Choose smaller aperture (larger f/-number)
Subject too dark; photo will be
underexposed.
• Choose a higher sensitivity (ISO equivalency)
• Use optional Speedlight.
• In exposure mode:
Lower shutter speed
Choose a larger aperture (smaller f/-number)
selected in mode and mode Change shutter speed or select mode
.
dial rotated to S.
(blinks)
(blinks)
(blinks)
Nikon Speedlight that does not
support i-TTL flash control attached
and set to TTL.
Change flash mode setting on optional Speedlight.
d
(blinks)
212
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel
Viewfinder
Explanation
Remedy
Memory insufficient to record further • Reduce quality or size.
photos at current settings, or camera • Delete photographs.
has run out of file or folder numbers. • Insert new memory card.
(blinks)
(blinks)
(blinks)
No memory card.
Insert memory card.
Problem(s) detected while shooting.
Press the shutter button again. Contact your
FUJIFILM dealer, If the warning is still displayed, or is
displayed frequently.
(blinks)
(blinks)
A
i
213
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Displays
Warning messages displayed in the LCD monitor
Warning Displayed
NO CARD
Explanation
Memory card is not inserted.
Remedy
Insert a memory card.
• Memory card is not formatted.
• The memory card contact area is soiled.
• Format memory card on the camera (➝p.179).
• Wipe the contact area on the memory card with a
soft, dry cloth. It may be necessary to format the
memory card (➝p.179). If the message still
appears, replace the memory card.
CARD NOT INITIALIZED
• Camera fault.
• Contact your FUJIFILM dealer.
• The memory card format is incorrect.
• It may be necessary to format the memory card
(➝p.179). If the message still appears, replace the
memory card.
CARD ERROR
MEMORY FULL
• Memory card access error.
Memory card is full.
• Contact your FUJIFILM dealer.
Erase some images in the memory card (➝p.53), or
use a memory card that has ample free space.
• The data could not be recorded due to an memory • Re-insert the memory card or turn the camera off
card error or a connection error between the
memory card and camera.
• The image cannot be recorded as it is too large to • Use a new memory card.
fit in the available space on the memory card.
and then on again. If the message still appears,
contact your FUJIFILM dealer.
WRITE ERROR
• The memory card is not formatted.
• Format the memory card on the camera (➝p.179).
The frame number has reached 999-9999.
AInsert a formatted memory card into the camera.
BSet [RENEW] for [FRAME NO.] under
[
SYSTEM] in the [SET UP] menu.
FRAME NO. FULL
READ ERROR
CStart taking pictures (The frame number starts
from “100-0001”).
DSet [CONTINUOUS] for [FRAME NO.] under
[
SYSTEM] in the [SET UP] menu.
• The played back file was not recorded correctly.
• Camera fault.
• This file cannot be played back.
• Contact your FUJIFILM dealer.
• An attempt was made to play back the image that • The movie and image cannot be played back.
was not recorded on this camera.
214
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Displayed
Explanation
Remedy
An attempt was made to erase a protected file.
Protected files cannot be erased. Remove the
protection (➝p.132).
PROTECTED FRAME
An attempt was made to playback images from an It is impossible to playback.
empty memory card.
NO IMAGE
An attempt was made to crop an image whose size The image cannot be cropped.
is 2304 × 1536 pixels, or an image shot with RAW
setting.
CANNOT CROP
~CANNOT CROP
• An attempt was made to crop an image shot using The image cannot be cropped.
a camera other than FinePix S5 Pro.
CANNOT CROP
• The image is damaged.
Prints were specified for 1000 or more frames in the The maximum number of frames for which prints can
DPOF frame settings.
be specified on the same memory card is 999.
Copy the images for which you want to order prints
onto another memory card and then specify the
DPOF settings.
DPOF FILE ERROR
CANNOT SET DPOF
An attempt was made to specify DPOF settings for DPOF printing cannot be used with this image
~CANNOT SET DPOF an image that is not supported by DPOF.
format.
The camera is not connected to a PC or printer.
• Check that the USB cable (mini-B) is connected
correctly.
• Check that your printer is turned on.
COMMUNICATION
ERROR
A
Displayed for PictBridge.
• Check that the printer is not out of paper or out of
ink.
i
PRINTER ERROR
• Turn the printer off briefly and then turn it back on.
• See the user manual supplied with your printer.
Displayed for PictBridge.
PRINTER ERROR
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
RESUME?
Continued Q
215
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Displays
Warning Displayed
Explanation
Displayed for PictBridge.
Remedy
• See the user manual supplied with the printer and
check whether the printer supports the JFIF-JPEG
or Exif-JPEG image format. If not, the printer
cannot print the images.
CANNOT BE PRINTED
• Images with CCD-RAW cannot be printed.
• Was the image data photographed using FinePix
S5 Pro?
You may not be able to print some images
photographed by other cameras.
• An attempt was made to make a setting for a
multiple exposure picture when [ISO AUTO
CONTROL] was [ON].
• An attempt was made to make a setting for a
multiple exposure picture when the auto
bracketing was active.
• Select [OFF] for [ISO AUTO CONTROL] under
[ISO AUTO CONTROL] under [SEXPOSURE] in
the [SET UP] menu (➝p.154).
• Make a setting for multiple exposure shooting after
canceling bracketing (➝p.104).
CAN NOT USE IN
CURRENT SETTING
• An attempt was made to use live view display
when the auto bracketing was active.
• You can use the live view display after canceling
bracketing (➝p.104).
An attempt was made to attach the GPS device
Turn the camera off briefly and set [GPS] for
when [BCR 1 SHOT] or [BCR CONTINUOUS] is set [BARCODE READER/GPS] under [ SHOOTING]
ERROR
for the [BARCODE READER/GPS] under
SHOOTING] in the [SET UP] menu
in the [SET UP] menu. Then, attach the device
again.
[
216
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
217
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
ZGetting ready
Matters
Problems
Possible causes
The battery has run out.
Solutions
Page
Charge the battery or load fully charged
battery.
30,
32,
208
The camera is not
turned ON when
setting the power
switch to ON.
The battery is loaded backward.
Load the battery in the correct direction
32
32
The battery cover is not closed securely. Close the battery cover securely.
The camera and AC power adapter are not Connect the camera and AC power
210
connected correctly.
adapter correctly.
Camera is used in extremely cold
conditions.
Put the battery in your pocket or another
warm place to heat it and then load it into
30,
33,
the camera just before you take a picture. 208
Battery and power
supply
Battery runs out
quickly.
The battery terminals are soiled.
Wipe the battery terminals with a clean,
208
dry cloth.
Same battery has been used for a long
period.
The battery can no longer be recharged.
Load a new battery.
32,
33,
208
The battery has run out.
Charge the battery or load fully charged
battery.
30,
32,
208
Power cuts out
during operation. The camera and AC power adapter are not Connect the camera and AC power
210
connected correctly.
adapter correctly.
Not usable battery is loaded.
Use the rechargeable battery NP-150.
30, 32
ZSetting menu etc.
Matters
Problems
Possible causes
Solutions
Page
Screens are not
displayed in
English.
A language other than English is selected Select ENGLISH.
for [ ] under [ TIME
] in the [SET UP] menu.
LCD monitor
display
41
218
Download from Www.Somanuals.com. All Manuals Search And Download.
ZShooting
Matters
Problems
Possible causes
The memory card is full.
Solutions
Page
Insert a new memory card or erase some
unnecessary frames.
34,
53,
127
The memory card is not formatted.
Format the memory card on the camera.
35,
145,
179
The focus is not set in AF-S mode (focus Use AF lock to set the focus and check that
indicator “l” not lit).
the focus indicator “l" is lit before taking 54, 61
the shot.
No memory card.
Insert a memory card.
34
60
No photograph is
taken when
pressing the
Basic operations
The camera will not focus.
Set the focusing mode to manual (M),
focus on the subject manually and take the
picture.
shutter button.
An error occurred.
Refer to the warning displays on P.212-
216 and take the appropriate action.
212-
216
The memory card is damaged.
The battery has run out.
Insert a new memory card.
34
Charge the battery or load fully charged
battery.
30,
32,
208
The Auto power off function has turned the Turn the camera on.
camera off.
36
61
Camera has
difficulty in
focusing on the
subject.
You are shooting a subject that is not
Use the focus lock to take the picture.
suited to autofocusing (➝p.63).
Focusing
Continued Q
219
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Matters
Problems
Possible causes
Solutions
Page
The shutter button was pressed while the Wait until the charging is completed before
flash was charging. pressing the shutter button.
79
The flash is set to suppressed flash mode. Raise the built-in flash.
(The flash is closed.)
Cannot use the
flash.
79
The battery has run out.
Charge the battery or load fully charged
battery.
30,
32,
Flash
208
The playback
image is dark
even though the
flash was used.
The subject is too far away.
Move to within the effective flash range
before taking the picture.
81
Your finger was covering the flash.
The lens is dirty.
Hold the camera correctly.
Clean the lens.
48
203
M (Manual) was set for the focus mode
when the picture was taken.
Set S (Single-servo AF) or C(Continuous-
servo AF) for the focus mode. Or make
sharp focus using M (Manual) before
taking a picture.
The image is
blurred.
54, 60
–
Photographed images
The shutter speed was slow when the
picture was taken.
It may cause camera shake. Hold the
camera steadily.
AC power adapter was connected or
disconnected during turning the camera
on.
Connect or disconnect the AC power
adapter only when the camera is off.
Failing to turn the camera off first can
result in damage to the memory card or
malfunctions during PC connection.
Photographed
Recording images images are not
recorded.
210
220
Download from Www.Somanuals.com. All Manuals Search And Download.
ZPlaying back
Matters
Problems
Possible causes
Solutions
Unprotect frame(s).
Page
The function
which erases a
frame does not
perform.
Some frames may be protected.
Erasing
132
[ALL FRAMES]
under
[
ERASE] does
not erase all
frames.
You opened the battery cover without
turning the camera off when replacing the the battery or memory card. Opening the
battery or memory card.
Always turn the camera off when replacing
[CONTINUOUS]
under [FRAME
NO.] does not
function.
Frame No.
battery cover without turning the camera
off may cause the frame number memory
to not function.
36
ZConnecting
Matters
Problems
Possible causes
Solutions
Page
182
–
The camera is not connected to the TV
correctly.
Connect the camera and TV correctly.
There is no image
on the TV.
“TV” is selected as the TV input.
Set the TV input to “VIDEO”.
Connecting to TV
The video output setting is incorrect.
Change the setting to [NTSC] or [PAL].
138,
145
r
The TV image is The video output setting is incorrect.
black and white.
Change the setting to [NTSC] or [PAL].
138,
145
PC does not
Connecting to PC recognize the
camera.
The USB cable (mini-B) is not correctly
connected to the PC or camera.
Set up the camera, and connect the USB
cable (mini-B) correctly.
194
Continued Q
221
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Matters
Problems
Possible causes
Solutions
Page
183
–
The USB cable (mini-B) is not correctly
connected to the printer or camera.
Set up the camera, and connect the USB
cable (mini-B) correctly.
Connecting to
printer
Cannot print with
PictBridge.
The printer is not turned on.
Turn the printer on.
ZOthers
Matters
Problems
Possible causes
Solutions
Page
Camera malfunction may be caused
temporarily.
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter 210
and try again.
32,
Nothing happens
when pressing the
buttons on the
camera.
The battery has run out.
Charge the battery or load fully charged
battery.
30,
32,
208
Camera operation
etc.
Camera functions are locked by the
function lock.
Unlock the function lock.
169
Camera malfunction may be caused
temporarily.
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer.
The camera no
longer works
correctly.
32,
210
222
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Model
Digital camera FinePix S5 Pro
Effective pixels
CCD
12.34 million (S-pixel: 6.17 million, R-pixel: 6.17 million) pixels
Large-format (23.0 × 15.5 mm) Super CCD SR Pro with primary color filter Total 12.9 megapixels (S-
pixels: 6.45 million; R-pixels: 6.45 million)
Storage media
File format
CF card and Microdrive™ (FAT32-compatible) (Compatibility is listed on Fujifilm website: http://
home.fujifilm.com/products/digital/)
DCF-compliant Compressed: Exif Ver.2.2 JPEG, DPOF-compatible Uncompressed: CCD-RAW (RAF)*1
Number of recorded pixels 4256×2848 / 3024×2016/2304×1536
File size
See the table on the p.226
Lens mount
Sensitivity
Nikon F mount (with AF coupling and AF contacts)
Auto, ISO 100/125/160/200/250/320/400/500/640/800/1000/1250/1600/2000/2500/3200*2 (Standard
Output Sensitivity)
Metering modes
Exposure control
Exposure compensation
Shutter
TTL open metering/3D 1005-pixel RGB matrix, Center-weighted, Spot
Program AE, Shutter-priority AE, Aperture-priority AE, Manual exposure
-5.0 EV to +5.0 EV 1/3, 1/2, 1 EV step
Electronically controlled vertical-travel focal-plane shutter
30 to 1/8000 sec, Bulb X contact: Max. 1/250 sec.*3
Shutter speeds
Auto bracketing
Focus
Number of shots 2-9 compensated EV value 1/3 1/2 2/3 1 EV step
Mode: Single-AF servo, Continuous AF servo, Manual
AF system: TTL phase difference detection with auxiliary AF flash
AF frame selection: Single-area AF, Dynamic-area AF, Group dynamic AF, Dynamic-area AF with closest
subject priority
Continued Q
223
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
White balance
Automatic scene recognition, Fine, Shade, Fluorescent(1-5), Incandescent, Choose color TEMP., Preset
custom(1-5)
Can be fine tuned.
*
Self-timer
Flash
20 sec./10 sec./5 sec./2 sec.
Manual pop-up, i-TTL balanced fill-flash for digital SLR, standard i-TTL flash for digital SLR, Guide No.:
12 (ISO 100-m); Sync. shutter speed: 1/250 sec. or slower
Flash modes
Front Synchro, Slow Synchro, Rear synchro, Red-eye Reduction and Red-eye Reduction Slow Synchro
Standard ISO-type with hot-shoe contact (Safty lock provided)
Accessory shoe
Synchro contacts
Synchro terminal
Viewfinder
X contacts only, synchronizing speed: 1/250 sec. or slower
Equipped with ISO 519 synchro terminal as standard, lock screw provided
Eye-level pentaprism (coverage: Approx. 95% vertical and horizontal), dioptric adjustment mechanism,
viewfinder magnification approx. 0.94×)
LCD monitor
2.5-inch 230,000-pixels low-temperature polysilicon TFT color LCD panel (approx. 100% coverage for
playback)
Remote release
10-pin remote release terminal provided.
Photography functions
Color space selection, dynamic range selection, film simulation mode selection, framing guideline, frame no.
memory, multiple exposure shooting, live image
Playback functions
Other functions
Cropping, slide show, multi-frame playback, histogram display, brightness warning display
PictBridge compatibility, Exif Print compatibility, PRINT Image Matching II compatibility, language
selection (
, English, Francais, Deutsch, Español, Italiano,
,
,
), time difference
224
Download from Www.Somanuals.com. All Manuals Search And Download.
Input/Output Terminal
Video output
NTSC/PAL-type
Digital interface
DC input socket
USB 2.0 High-Speed, MTP/PTP (Picture Transfer Protocol)
AC Power Adapter AC-135VN (sold separately)
Power Supply and Others
Power supply
Use one of the following:
Rechargeable Battery NP-150 (included)
AC Power Adapter AC-135VN (sold separately)
Guide to the number of
available frames for battery
operation
Battery Type
With LCD monitor OFF
NP-150 (1500 mAh)
Approx.400 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
Using the battery supplied with the camera and AF50mm/F1.4D lens. The storage media should be
CompactFlash card.
Pictures should be taken at a temperature of +23°C (+73°F), shoot every 30 seconds with the AF-moved
for each shot, the flash used at full power every second shot and the camera turned off and then on again
once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery, the
figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions (W/H/D)147 mm × 113 mm × 74 mm/5.8 in. × 4.4 in. × 2.9 in. (not including accessories and attachments)
Camera mass (weight)
Approx. 830 g/29.3 oz. (not including accessories, battery and memory card)
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Operating Conditions
1 CCD-RAW is a format specific to the FinePix S5 Pro. The enclosed "FinePixViewer" software or the optional Hyper-Utility
software "HS-V3" is required to interpret images.
2 Images shot in high-sensitivity photography may appear coarse and may also be affected by noise such as white dots.
3 Images shot with long exposures may appear coarse and may also be affected by noise such as white dots.
*
*
*
225
Continued Q
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
ZMemory card capacity and image quality/size
The following table shows the approximate number of pictures that can be stored on a 1 GB memory card at different quality
and size settings.
Exposure mode , ISO200, focus mode M, [IMAGE DISPLAY] set to [OFF], [QUICK PREVIEW DATA] set to [ON], SanDisk
SDCFX (Extreme w) series card
[D-RANGE] set to [100%(STD)]
Image quality
Image size
File size
No. of images
Buffer capacity Minimum shooting interval
RAW+FINE
L
M
S
L
approx.18.1MB
approx.16.3MB
approx.15.1MB
approx.15.7MB
approx.14.8MB
approx.14.2MB
approx.12.8MB
approx.5.3MB
approx.3.5MB
approx.2.2MB
approx.2.9MB
approx.2.0MB
approx.1.4MB
55
61
approx.20
approx.21
approx.21
approx.21
approx.21
approx.21
66
RAW+NORMAL
63
M
S
–
67
70
RAW
FINE
78
approx.24
approx.29
approx.39
approx.51
approx.30
approx.71
approx.80
Max. 3 frames/sec.
L
189
285
442
345
495
718
M
S
L
NORMAL
M
S
226
Download from Www.Somanuals.com. All Manuals Search And Download.
[D-RANGE] set to WIDE (other than [100%(STD)])
Image quality
Image size
File size
No. of images
Buffer capacity Minimum shooting interval
RAW+FINE
L
M
S
L
approx.30.3MB
approx.28.6MB
approx.27.3MB
approx.28.0MB
approx.27.1MB
approx.26.5MB
approx.25.1MB
approx.5.3MB
approx.3.5MB
approx.2.2MB
approx.2.9MB
approx.2.0MB
approx.1.4MB
32
34
approx.8
approx.8
approx.8
approx.8
approx.8
approx.8
36
RAW+NORMAL
35
M
S
–
36
37
RAW
FINE
39
approx.10
approx.19
approx.73
approx.100
approx.19
approx.90
approx.100
Max. 1.6 frames/sec.
L
189
285
442
345
495
718
M
S
L
NORMAL
M
S
MEMO
• When [OFF] is set for the [QUICK PREVIEW DATA] under [
SHOOTING] in the [SET UP] menu, File size decreases, and then
No. of images and Buffer capacity differs from the value denoted above.
• No. of images varies depending on the scene recorded and the make of memory card.
These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this Owner’s Manual.
The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
*
*
*
227
Download from Www.Somanuals.com. All Manuals Search And Download.
Explanation of Terms
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film
or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a
digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases
by 1.
JPEG
Joint Photographic Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality in
the decompressed (restored) image.
Smear
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such as
the sun or reflected sunlight, in the photography screen.
White Balance
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance.
CCD-RAW
This is the image data prior to signal processing (the reconstruction of the data read in from the CCD as an image). Because
the signal processing is performed on the computer, high levels of control are possible.
To reconstruct images, FinePixViewer (on the enclosed CD-ROM) or the Hyper Utility (optional) must be installed on your
computer.
*
Color Temperature
A low-temperature light source, such as a candle flame, is strongly red, while a high-temperature light source, such as a gas
burner flame, is strongly blue. The color of the light for these temperatures is expressed as a color temperature (K = Kelvin).
The light of the sun at midday in a completely clear sky is taken to be 5500K.
228
Download from Www.Somanuals.com. All Manuals Search And Download.
Adobe RGB (1998)
A color space introduced as the working color space for Adobe Photoshop 5.0. AdobeRGB encompasses almost all the colors
reproduced by CMYK printers and is intended primarily for printing applications. It was introduced as "SMPTE-240E" in the
RGB settings in Adobe Photoshop 5.0 and as "Adobe RGB (1998)" in the profile settings from version 6.0 onwards.
Color space
Refers to the range of colors, expressed as two-dimensional or three-dimensional numerical values, that can be reproduced
by devices such as cameras, monitors and printers. The sRGB and AdobeRGB color spaces are each shown as an xy color
chart (a coordinate color space in which colors are represented in two dimensions with no brightness value). The range of
colors that can be expressed by a particular color space is indicated by a triangle imposed on the xy color chart. Colors become
brighter as they approach the outer edge of the xy color chart. This color representation method is capable of showing all the
actual colors.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
229
Download from Www.Somanuals.com. All Manuals Search And Download.
FUJIFILM Digital Camera Worldwide Network
If you have technical questions or if you need repair service, ask the following local distributor.
Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty.
There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
These lists are subject to change without notice.
NORTH AMERICA
Canada
U.S.A.
Hawaii
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
FUJIFILM Canada Inc.
Technical support
Repair service
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-800-263-5018 FAX 1-905-755-2993 http://www.fujihelp.ca
1100 King George Post Rd., Edison, NJ 08837
FUJIFILM U.S.A., INC.
Technical support
Repair service
1100 King George Post Rd., Edison, NJ 08837
94-468 Akoki Street, Waipahu, HI. 96797
TEL 1-808-677-3854, ext. 209 FAX 1-808-677-1443
FUJIFILM Hawaii, Inc.
Technical support &
Repair service
CENTRAL & SOUTH AMERICA
Argentina
Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
TEL +54-11-4836-1000 FAX +54-11-4836-1144
Imagen e informacion S.A.
Technical support &
Repair service
Bolivia
Calle H N.° 5 - Equipetrol Norte - Santa Cruz
Reifschneider Bolivia Ltda.
Technical support &
Repair service
Brazil
Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
Fuji Photo Film do Brasil Ltda.
Technical support &
Repair service
Chile
Av. El Conquistador del Monte 5024, Huechuraba, Santiago, Chile
Reifschneider SA
Technical support &
Repair service
Colombia
Ecuador
Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
Animex de Colombia Ltda.
Technical support &
Repair service
Bolivar 5-69 y Hermano Miguel
TEL 593-72-835526 FAX 593-72-833157
Espacri Cia Ltda
Technical support &
Repair service
230
Download from Www.Somanuals.com. All Manuals Search And Download.
Ecuador
Mexico
Simón Bolivar 5-69 y Hno. Miguel - Cuenca
Importaciones Espacri Cia. Ltda.
Technical support &
Repair service
Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
Fujifilm de Mexico, S.A. de C.V.
Technical support
Repair service
Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de
Mexico
Paraguay
Peru
Edificio Unitas 15 de Agosto 1035, Asunción
Errece S.R.L.
Technical support &
Repair service
Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
Procesos de Color S.A.
Technical support &
Repair service
Uruguay
Uruguay
Venezuela
Cuareim 1439, montevideo, Uruguay
Fotocamara S.R.L.
Technical support &
Repair service
Maldonado 1787 Montevideo- Uruguay
Kiel S.A.
Technical support &
Repair service
Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
C. Hellmund & Cia Sa
Technical support &
Repair service
EUROPE
Austria
Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58
Fuji Film Oesterreich
Technical support &
Repair service
Belgium
20, Avenue Lavoisier, Wavre, 1300, Belgium
Belgian Fuji Agency
Technical support &
Repair service
Continued Q
231
Download from Www.Somanuals.com. All Manuals Search And Download.
FUJIFILM Digital Camera Worldwide Network
Croatia
Hondlova 2, Zagreb, Croatia
I&I d.o.o.
Technical support
Repair service
Hondlova 2, Zagreb, Croatia
Cyprus
Cyprus
11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia
PMS IMAGING LTD
Technical support &
Repair service
28B, Agiou Demetriou, Acropoli, Nicosia
Doros Neophytou
CAMERA REPAIRS
Technical support &
Repair service
Czech Republic
Czech Republic
Denmark
U nakladoveho nadrazi 2/1949, 130 00 Praha 3
Fujifilm Cz., s.r.o.
Technical support
Milesovska 1, 130 00 Praha 3, Czech republic
AWH servis
Repair service
Stubbeled 2, 2950 Vedbæk Denmark
Fujifilm Denmark A/S
Technical support &
Repair service
Finland
France
Martinkyläntie 41, 01720 Vantaa, Finland
Fuji Finland Oy
Technical support &
Repair service
2, Avenue Franklin, 78186 Saint-Quentin en Yvelines, France
FUJIFILM France
Technical support &
Repair service
Germany
Heesenstr. 70, 40549 Düsseldorf
Fuji Photo Film (Europe) GmbH
Technical support &
Repair service
*
National call TEL 0180 5898980 FAX 0180 5898982
*
12 Cent/Min aus dem deutschen Festnetz
Greece
1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece
FUJIFILM HELLAS S.A.
Technical support &
Repair service
Hungary
Iceland
Vaci ut 19. Budapest, 1134, Hungary
Fujifilm Hungary Ltd.
Technical support
Skipholt 31, 105 Reykjavik, Iceland
Icephoto (Ljosmyndavorur)
Technical support &
Repair service
232
Download from Www.Somanuals.com. All Manuals Search And Download.
Italy
Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
FujiFilm Italia S.p.A.
Technical support
Repair service
Fujifilm On Line - Call center
Lithuania
Malta
Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania
Fujifilm Lithuania
Technical support &
Repair service
Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05
Ciancio (1913) Co.Ltd.
Technical support &
Repair service
Netherlands
Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands
Fujifilm Nederland BV
Technical support
Repair service
Hoevenseweg 43, 4877 LA, Etten-Leur, The Netherlands
Norway
Poland
Lilleakerveien 10, 0283 Oslo, Norway
TEL 0047-22736000 FAX 0047-22736020 http://www.fujifilm.no/
mailto:[email protected]
Fujifilm Norge AS
Technical support
Repair service
Liaveien 1, 5132 Nyborg, Norway
TEL 0047-55393880 FAX 0047-55195201 http://www.camera.no/
mailto:[email protected]
Poland Al..Jerozolimskie 178; 02-486 Warszawa
Fujifilm Polska Distribution Sp. z
o.o.
Technical support
Repair service
Poland, Muszkieterow 15, 02-273 Warszawa
Portugal
Romania
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
Fujifilm Portugal, Lda
Technical support
Repair service
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
CTS-Cardinal Top Systems Ltd
Technical support &
Repair service
Continued Q
233
Download from Www.Somanuals.com. All Manuals Search And Download.
FUJIFILM Digital Camera Worldwide Network
Russia
Slovakia
Spain
Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
ZAO “Fujifilm RU”
Technical support
Repair service
18, Shelepikhinskaya Naberezhnaya str., Moscow, 123290, Russia
TEL +7-095-797-3434 FAX +7-095-797-3434
Pribylinska 2, 831 04 Bratislava, Slovakia
Fujifilm Slovakia
Technical support
Repair service
FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
Aragón 180, 08011 Barcelona (España)
Fujifilm España S.A.
Technical support
Repair service
Aragón 180, 08011 Barcelona (España)
Sweden
Sveavägen 167 104 35 Stockholm
Fujifilm Sverige AB
Technical support
Repair service
Sveavägen 167 104 35 Stockholm
Switzerland /
Lichtenstein
Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
Fujifilm (Switzerland) AG
Technical support &
Repair service
Turkey
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
Fujifilm Turkiye Sinfo A.S.
Technical support
Repair service
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
U.K.
St Martins Way St Martins Business Centre Bedford MK42 0LF
Fuji Photo Film (UK) Ltd.
Technical support
Repair service
St Martins Way St Martins Business Centre Bedford MK42 0LF
Ukraine
12, Kontraktova ploshcha, Kyiv 04070, Ukraine
Image Ukraine CJSC
Technical support &
Repair service
234
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDDLE EAST
Iran
229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
Tehran Fuka Co.
Technical support &
Repair service
Israel
Efal 33 keyriat Arie Petah Tikva 49130, Israel
Shimone Group Ltd.
Technical support
Repair service
Efal 33 keyriat Arie Petah Tikva 49130, Israel
Jordan
Al- Abdali, Amman / Jordan
Grand Stores
Technical support &
Repair service
Qatar
Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
Techno Blue
Technical support
Saudi Arabia
Syria
P.O. Box 1716, Jeddah 21441, Saudi Arabia
Emam Distribution Co. Ltd.
Technical support
Al-Shahbandar P.O. Box:31180 Damascus SYRIA
Film Trading Company
Technical support
Repair service
Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
U.A.E.
Yemen
P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
Grand Stores
Technical support &
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503980 FAX 00967-1-503983
Al-Haidary Trading
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
AFRICA
Egypt
426 Pyramids St., Giza, Egypt
Foto Express Egypt
Technical support &
Repair service
Kenya
P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
Fuji Kenya Ltd
Repair service
Continued Q
235
Download from Www.Somanuals.com. All Manuals Search And Download.
FUJIFILM Digital Camera Worldwide Network
OCEANIA
Australia
114 Old Pittwater Road, Brookvale, NSW, 2100, Australia
FUJIFILM Australia Pty Ltd
Technical support
Repair service
114 Joynton Avenue, Zetland, NSW, 2017, Australia
Fiji
70-72 Cumming Street,Suva,Fiji
Brijlal & Co. Ltd
Technical support &
Repair service
New Caledonia
New Zealand
Papua New Guinea
58, rue Higginson - B.P.661 - 98845
Phocidis SARL
Technical support &
Repair service
Cnr William Pickering & Bush Road Albany, Auckland
Fujifilm NZ Ltd
Technical support &
Repair service
Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko
Oceania PNG Limited
Technical support
ASIA
Hong Kong
8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG
Fuji Photo Products Co., Ltd.
Technical support &
Repair service
Indonesia
Malaysia
Jl.Matraman Raya 12, Jakarta Timur 13150
TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012
PT Modern Photo Tbk
Technical support &
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
Fuji Photo Film (Malaysia)
Sdn. Bhd.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
Philippines
Singapore
24 Sto. Domingo St., Quezon City 1100, Philippines
YKL Development & Trdg. Corp.
Technical support
Repair service
24 Sto. Domingo St., Quezon City 1100, Philippines
10 New Industrial Road Fujifilm Building Singapore 536201
Fuji Photo Film Singapore Pte Ltd
Technical support &
Repair service
236
Download from Www.Somanuals.com. All Manuals Search And Download.
South Korea
South Korea
South Korea
30-1, Mukjeung-dong, Jung-gu, Seoul, Korea
Korea Fujifilm Co., Ltd.
Technical support
#301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea
Yonsan AS Center (Fujidigital)
Repair service
2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea
Kangnam AS Center
(Digitalgallery)
Repair service
South Korea
Taiwan
241-4, Bujeon-dong, Busanjin-gu, Busan, Korea
Busan AS Center (Digital-Sewon)
Repair service
No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
Hung Chong Corp.
Technical support &
Repair service
Thailand
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
Fuji Photo Film (Thailand) Ltd.
Technical support
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
237
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Notes
• Make sure that you use your S5 Pro camera correctly.
Read these Safety Notes and your Owner’s Manual
carefully before use.
• After reading these Safety Notes, store them in a safe
place.
WARNING
If a problem arises, turn the camera off,
remove the battery, disconnect and
unplug the AC power adapter.
Continued use of the camera when it is
emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can
cause a fire or electric shock.
About the Icons
The icons shown below are used in this document to
indicate the severity of the injury or damage that can
result if the information indicated by the icon is ignored
and the product is used incorrectly as a result.
Unplug from
power socket.
• Contact your FUJIFILM dealer.
Do not allow water or foreign objects to
enter the camera.
If water or foreign objects get inside the
camera, turn the camera off, remove the
battery and disconnect and unplug the AC
power adapter.
Continued use of the camera can cause a
fire or electric shock.
• Contact your FUJIFILM dealer.
This icon indicates that death
or serious injury can result if
the information is ignored.
WARNING
CAUTION
This icon indicates that
personal injury or material
damage can result if the
information is ignored.
Do not use the camera in the bathroom
or shower.
This can cause a fire or electric shock.
The icons shown below are used to indicate the nature of
the information which is to be observed.
Do not use in the
bathroom or
shower.
Triangular icons tell you that this information requires
attention (“important”).
Never attempt to change or take apart
the camera. (Never open the casing.)
Do not use the camera when it has been
dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an
action that must be performed (“Required”).
Do not
disassemble.
238
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
WARNING
Do not change, heat or unduly twist or
pull the connection cord and do not
place heavy objects on the connection
cord.
These actions could damage the cord and
cause a fire or electric shock.
• If the cord is damaged, contact your
FUJIFILM dealer.
Do not heat, change or take apart the
battery.
Do not drop or subject the battery to
impacts.
Do not store the battery with metallic
products.
Do not use chargers other than the
specified model to charge the battery.
Any of these actions can cause the battery
to burst or leak and cause fire or injury as
a result.
Do not place the camera on an unstable
surface.
This can cause the camera to fall or tip
over and cause injury.
Use only the battery or AC power
adapter specified for use with this
camera.
Do not use voltages other than the
power supply voltage shown.
The use of other power sources can cause
a fire.
Never attempt to take pictures while in
motion.
Do not use the camera while you are
walking or driving a vehicle.
This can result in you falling down or being
involved in a traffic accident.
If the battery leaks and fluid gets in
contact with your eyes, skin or
clothing. Flush the affected area with
clean water and seek medical attention
or call an emergency number right
away.
Do not touch any metal parts of the
camera during a thunderstorm.
This can cause an electric shock due to
induced current from the lightning
discharge.
Do not use the battery except as
specified.
Load the battery as aligned with the
indicator.
Do not use the charger to charge
battery other than those specified here.
The charger is designed for the
rechargeable battery NP-150. Using the
charger to charge conventional batteries
or other types of rechargeable battery can
cause the battery to leak fluid, overheat or
burst.
Continued Q
239
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Notes
WARNING
CAUTION
When carrying the NP-150, install it in a
digital camera or keep it in the soft case
provided.
When storing the NP-150, keep it in the
soft case provided.
When discarding, cover the battery
terminals with insulation tape.
Contact with other metallic objects or
battery could cause the battery to ignite or
burst.
Do not use this camera in locations
affected by oil fumes, steam, humidity
or dust.
This can cause a fire or electric shock.
Do not leave this camera in places
subject to extremely high
temperatures.
Do not leave the camera in locations such
as a sealed vehicle or in direct sunlight.
This can cause a fire.
Keep memory cards out of the reach of
small children.
Keep out of the reach of small children.
This product could cause injury in the
hands of a child.
Because memory cards are small, they
can be swallowed by children. Be sure to
store memory cards out of the reach of
small children. If a child swallows a
memory card, seek medical attention or
call an emergency number.
Do not place heavy objects on the
camera.
This can cause the heavy object to tip over
or fall and cause injury.
Do not move the camera while the AC
power adapter is still connected.
Do not pull on the connection cord to
disconnect the AC power adapter.
This can damage the power cord or cables
and cause a fire or electric shock.
Do not use the AC power adapter when
the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the
AC power adapter in a cloth or blanket.
This can cause heat to build up and distort
the casing or cause a fire.
240
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
When you are cleaning the camera or
you do not plan to use the camera for
an extended period, remove the battery
and disconnect and unplug the AC
power adapter.
Failure to do so can cause a fire or electric
shock.
When charging ends, unplug the
charger from the power socket.
Leaving the charger plugged into the
power socket can cause a fire.
Using a flash too close to a person’s
eyes may temporarily affect the
eyesight.
Take particular care when photographing
infants and young children.
When a memory card is removed, the
card could come out of the slot too
quickly. Use your finger to hold it and
gently release the card.
Request regular internal testing and
cleaning for your camera.
Build-up of dust in your camera can cause
a fire or electric shock.
• Contact your FUJIFILM dealer to
request internal cleaning every 2 years.
• Please note this is not a free of charge
service.
241
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
242
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
243
Download from Www.Somanuals.com. All Manuals Search And Download.
-
-
-
-
26 30, Nishiazabu 2 chome, Minato ku, Tokyo 106 8620, Japan
http://www.fujifilm.com/products/digital/
Printed in Japan
Y-608112-PY
Download from Www.Somanuals.com. All Manuals Search And Download.
|