D T X - E LT C a b l e A n a l y z e r
The Gold Standard in cable certification now configured to
meet the specific needs of electrical installers
Certification made easy
The DTX advantage: speed,
performance and accuracy
The DTX-ELT gives you a solution that
streamlines every aspect of the certification
job – from setup, to testing and record-fast
troubleshooting, to reporting results to the
customer. This newest member of Fluke
Networks DTX CableAnalyzer family, the
DTX-ELT is designed to meet the specific
needs of electrical installers.
The DTX CableAnalyzer’s powerful fea-
tures, speed and ease-of-use, increases
efficiency and productivity, improving
your bottom line. It’s all about time –
and no other tester delivers like the DTX.
• Increase productivity from day
one. Intuitive interface means
your technicians spend less
time in training and more
time testing.
Troubleshooting: twice as fast
When a link fails, the DTX-ELT shows you
easy-to-understand directions to identify the
point of failure (distance from the tester) and
the possible reason(s) for the failure. These
directions not only tell you the problem, but
identify corrective actions you can take to
solve the problem quickly.
• Level IV Accuracy. Get the
most accurate test results in
the shortest possible time.
• Advanced time-saving
diagnostics. Pinpoints the
location of a failure and is
the only tester that suggests
corrective action, saving
Enhanced user experience
The DTX-ELT isn’t just a faster way to test.
It cuts set-up, training and reporting times.
Extended battery life means you can do more
on a single charge. And a bright color display,
ample memory, and built-in talk set all con-
tribute to overall productivity while enhanc-
ing the user experience. This all adds up to
saving you time and money every day.
Instead of spending time executing trial and
error corrections – and re-testing to find out
whether the problem has been resolved – the
technician knows exactly where to look and
what to do to fix the failing link. Even if only
two percent of the tested links fail, the DTX
diagnostics will save you as much as two
hours of labor per day to turn the failures
into passes.
troubleshooting time.
• 12-hour battery life. Gives you
the power to complete any job.
• Professional reporting.
LinkWare™ Cable Test Manage-
ment Software manages test
results and produces reports in
hardcopy or PDF format.
• The DTX Series future-proofs
your investment, giving you a
clear and simple upgrade path
from the DTX-ELT to any higher
performance model, including
the DTX-1800.
Enabling cable certification for electrical installers
Download from Www.Somanuals.com. All Manuals Search And Download.
Main unit and remote: Lithium-ion battery pack, 7.4 V, 4000 mAh
• Typical battery life: 12 to 14 hours
Power
• Charge time (with tester off): 4 hours (below 40 °C)
• AC adapter/charger, USA version: Linear power supply; Input 108 V ac to 132 V ac, 60 Hz ;
Output 15 V dc, 1.2 A
• AC adapter/charger, international version: Switching power supply; Input 90 V ac to 264 V ac,
48 to 62 Hz; Output 15 V dc, 1.2 A (isolated output)
• Memory backup power in main unit: Lithium battery
• Typical life of lithium battery: 5 years
• The battery will not charge at temperatures outside of 0°C to 45°C (32°F to 113°F).
The battery charges at a reduced rate between 40°C and 45°C (104°F and 113°F).
English, French, German, Spanish, Russian and Italian
Service center calibration period is 1 year
Languages Supported
Calibration
Performance Specifications
Note: all specifications for tests on twisted-pair cabling apply to 100 Ω cable. Contact Fluke Networks
for information on measurement performance for cable with a different impedance.
The baseline accuracy of all DTX Series testers meets or exceeds the requirements of Level IV in
2nd Edition of IEC 61935-1 over the frequency range supported by the tester.
Baseline accuracy
DTX CableAnalyzer far exceeds Level III requirements of TIA/EIA-568-B.2-2 and IEC 61935-1
Category 6/Class E link
test modes (and lower link
categories)
Length for Twisted Pair Cabling
(Length specs do not include the uncertainty of the cable’s NVP Value)
Parameter
Range
Single-ended Test
800 m (2600 ft)
0.1 m or 1 ft
Dual-ended Test (Main and Remote)
150 m (490 ft)
0.1 m or 1 ft
Resolution
Accuracy
± (1m + 4%)
± (1m + 4%)
Delay Skew
Parameter
Twisted Pair Cabling
0 ns to 100 ns
1 ns
Range
Resolution
Accuracy
10 ns
DC Loop Resistance Test
Parameter
Twisted Pair Cabling
O Ω to 53Ω
0.1 Ω
Range
Resolution
Accuracy
(1 Ω + 1%)
Less than 10 minutes to rated accuracy following over-voltage. Referencing is required after repeated or
prolonged over-voltage.
Overload Recovery Time
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering Information
Model Number
DTX-ELT
Description
DTX-ELT CableAnalyzer: Includes DTX-ELT Main and Smart Remote, LinkWare PC Software, Cat 6/Class E
Channel Adapters (2), DTX-REFMOD Reference Module, AC Chargers (2), Carrying Case, USB Interface Cable
(Mini-B), Getting Started Guide, Users Manual and Technical Reference Handbook CD
DTX-ELT PRO
DTX-ELT PRO CableAnalyzer:
Includes DTX-ELT Main and Smart Remote, LinkWare PC Software, Cat 6A/Class EA Permanent Link Adapters
(2), Cat 6/Class E Channel Adapters (2), AC Chargers (2), Carrying Case, USB Interface Cable (Mini-B), Getting
Started Guide, Users Manual and Technical Reference Handbook CD
DTX-ELT Accessories
Interface to Cat 5/5e/6 fixed cabling infrastructure with the highest accuracy through
the industry-standard, test reference plug (centered plug).
DTX-PLA002S,
Permanent Link Adaptor Set
Allows the user to calibrate the Return Loss performance of the DTX-PLA002 adaptors.
DTX-PLCAL,
Permanent Link Adapter
Field Calibration Module
This item includes two replacement contact blocks for the 8-pin modular plug of the DTX-PLA002 permanent
link adapter.
DTX-PLA002PRP, DTX-PLA002,
plug replacement parts
Troubleshoot coaxial network cabling by measuring cable length, resistance, impedance and insertion loss.
DTX-COAX,
Coax Cable Adaptor Set
With an extra Lithium-ion battery pack you are ensured that you have with you an
additional 12 to 14 hours of typical battery life.
DTX-LION, Battery
Extra AC battery charger.
DTX-ACUN, Universal AC Charger
N E T W O R K S U P E R V I S I O N
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To find your local office contact details, go to
2008 Fluke Corporation. All rights reserved.
Printed in U.S.A. 6/2008 3346250 D-EN Rev A
©
Download from Www.Somanuals.com. All Manuals Search And Download.
|