Essick Air Microscope Magnifier EM 700P User Manual

PARTS AND OPERATION MANUAL  
PLASTER/MORTARMIXERS  
EM-700S  
EM-700P  
Revision #8 (03/17/06)  
MULTIQUIPINC.  
18910 WILMINGTON AVE.  
PARTS DEPARTMENT:  
800-427-1244  
CARSON, CALIFORNIA 90746 FAX: 800-672-7877  
310-537-3700  
800-421-1244  
SERVICE DEPARTMENT:  
800-478-1244  
FAX:310-537-3927  
FAX:310-537-4259  
E-mail:[email protected] www:multiquip.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HERE'S HOW TO GET HELP  
PLEASE HAVE THE MODEL AND SERIAL NUMBER  
ON-HAND WHEN CALLING  
PARTS DEPARTMENT  
800-427-1244 or 310-537-3700  
FAX: 800-672-7877 or 310-637-3284  
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE  
800-478-1244 or 310-537-3700  
FAX: 310- 537-4259  
WARRANTY DEPARTMENT  
888-661-4279, or 310-661-4279  
FAX: 310- 537-1173  
MAIN  
800-421-1244 or 310-537-3700  
FAX: 310-537-3927  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Here's How To Get Help .......................................... 3  
Table Of Contents ................................................... 4  
Parts Ordering Procedures ..................................... 5  
Rules for Safe Operation & Safety Decals .............. 6  
Warranty.................................................................. 7  
ESSICK — 700S & 700P  
Operations ......................................................... 8-11  
Specifications ........................................................ 12  
Explanation Of Codes In Remarks Column .......... 14  
Suggested Spare Parts ......................................... 15  
Drum Head and Paddle Shaft Assembly.......... 16-17  
Steel Drum (S) ................................................. 18-19  
Polyethylene Drum (P) ..................................... 20-21  
Gas Engines, Pulleys & Cab Assembly............ 22-23  
Electric Motor & Pulleys ................................... 24-25  
Axle & Wheel Group ......................................... 26-27  
Terms and Conditions Of Sale — Parts ................ 28  
NOTE: Specification and part number  
are subject to change without notice.  
PAGE 4 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Effective:June 1st, 2005  
PARTS ORDERING PROCEDURES  
Ordering parts has never been easier!  
Choose from three easy options:  
Best Deal!  
Order via Internet (Dealers Only)  
Orderpartson-lineusingMultiquip’sSmartEquipwebsite!  
:
If you have an MQ Account, to obtain a  
Username and Password, E-mail us at:  
View Parts Diagrams  
Order Parts  
PrintSpecificationInformation  
To obtain an MQ Account, contact your  
District Sales Manager for more information.  
Use the internet and qualify for a 5% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Gotowww.multiquip.comandclickon  
to log in and save!  
Order Parts  
Note: Discounts Are Subject To Change  
Fax your order in and qualify for a 3% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Order via Fax (Dealers Only)  
:
All customers are welcome to order parts via Fax.  
Domestic (US) Customers dial:  
1-800-6-PARTS-7 (800-672-7877)  
Note: Discounts Are Subject To Change  
Domestic (US) Dealers Call:  
1-800-427-1244  
Order via Phone:  
Non-Dealer Customers:  
International Customers should contact  
their local Multiquip Representatives for  
Parts Ordering information.  
Contact your local Multiquip Dealer for  
parts or call 800-427-1244 for help in  
locating a dealer near you.  
When ordering parts, please supply:  
Dealer Account Number  
Specify Preferred Method of Shipment:  
Fed Ex/UPS  
DHL  
Dealer Name and Address  
Priority One  
Ground  
Truck  
Shipping Address (if different than billing address)  
Return Fax Number  
Applicable Model Number  
Next Day  
Second/ThirdDay  
Quantity, Part Number and Description of Each Part  
Unless otherwise indicated by customer, all orders are treated asStandard Orders and will ship  
within24hours.WewillmakeeveryefforttoshipAirShipmentsthesamedaytheorderisreceived,  
if received prior to 2PM PST. Stock Orders must be noted on fax or web order form.  
NOTE  
WE ACCEPT ALL MAJOR CREDIT CARDS!  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RULES FOR SAFE OPERATION & SAFETY DECALS  
Do not operate or service this equipment  
When towing, an adequate safety chain  
before reading the operating and  
maintenance instructions manual or serious  
injury may result.  
must be fastened to the frame, refer to page 9.  
Keep all inexperienced and unauthorized  
people away from the equipment at all times.  
Do not operate this equipment unless all  
Unauthorized equipment modifications will  
guards and safety devices are attached and  
in place.  
void all warranties.  
Check all fasteners periodically for  
Stop the engine when leaving the  
tightness. Also check towing tongue bolt, lock  
nut and wheel lug nuts for wear.  
equipment.  
Block the unit when leaving or when using  
Wear safety glasses at all times when  
on a slope  
working around machinery.  
Maintain this equipment in a safe  
Stop the engine and disconnect the spark  
plug before allowing anybody’s hands in the  
mixing drum.  
operating condition at all times.  
Caution must be exercised while servicing  
this equipment. Rotating and moving parts  
can cause injury if contacted.  
Never pour or spray water over the engine  
or electric motor.  
Stop the engine before servicing, adding  
Always stand clear of dump handle when  
fuel and oil.  
mixer is in operation. Any binding of material  
between the mixer blades and drum will cause  
drum and handle to quickly move in the  
discharge position.  
The safety instruction decals shown must be on all Essick Mixers  
CAUTION!  
PUTTING HANDS IN MIXING DRUM  
SHUT OFF ENGINE BEFORE  
Caution Decal is:  
P/N EM948423  
SAFETY INSTRUCTIONS  
1. Do not operate or service this machine before reading the operating and maintenance manual.  
2. Keep all inexperienced and/or unauthorized people away from equipment at all times.  
3. Do not operate this equipment unless all guards and safety devices are attached and in place.  
4. Keep this equipment in safe operating condition at all times.  
5. Caution must be exercised while servicing this equipment.  
Rotating and moving parts can cause injury if contacted.  
6. Stop engine and allow to cool before adding fuel or oil.  
7. Stop engine when leaving equipment.  
8. Block unit when parking on a slope.  
9. Unauthorized equipment modifications will void all warranties.  
Ñ
Ñ
,
The safety instruction decal is P/N EM948501  
PAGE 6 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY  
There are no warranties, express or implied, made by Multiquip  
Inc. hereunder on Products manufactured or distributed by it  
except the warranty against defects in material and workmanship  
on new Products to the original purchaser, as hereinafter set  
forth.  
There are no warranties, express or implied, in addition to the  
above except as may be provided in writing by Multiquip Inc.  
MULTIQUIP INC.SHALL NOT BE LIABLE FOR ANY SPECIAL,  
INDIRECT OR CONSEQUENTIAL DAMAGES.  
THE FOREGOINGWARRANTIES ARE IN PLACE AND IN LIEU  
OF ALL WARRANTIES OF MERCHANTABILITY AND  
FITNESS AND SETS FORTHTHE ENTIRE OBLIGATION OF  
MULTIQUIP INC.  
Multiquip Inc. warrants Products manufactured by it to be free  
from defects in material and workmanship under normal and  
proper use and servicing for the periods specified on the bottom  
of this page.Warranty on the engines supplied with the Products  
is limited to the warranty extended by the engine manufacturer.  
Multiquip Inc.sole obligation under this warranty is limited to the  
replacement or repair, at its Carson, California facility, or such  
authorized facility, of only such part or parts thereof as shall  
appear to Multiquip Inc.upon inspection at such facility, to have  
been defective in material and workmanship.  
To avoid misrepresentations with respect to Products sold  
hereunder, the Dealer agrees that no warranties, or other  
operating guaranties on any Products covered by this Agreement  
shall be made in excess of those made by Multiquip Inc.  
Multiquip Inc. Warranty Periods:  
A statement giving model and serial number of the Product, date  
of sale to original purchaser and date and description of failure  
shall accompany all parts.  
EM-700.......................... 12 months  
Any part or parts determined by Multiquip Inc.to be defective will  
be replaced free of charge, F.O.B.Carson, California. Returned  
parts subject to warranty must be shipped prepaid to Multiquip  
Inc.within 30 days from the date the defective part or parts were  
removed.This warranty does not apply to any part or parts which  
have been subject to abuse or unauthorized repairs  
Warranty with respect to Products, components and accessories  
not manufactured by Multiquip Inc. is limited to the warranty  
extended by the manufacturer of those items.  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — OPERATIONS  
CONTROLS  
KILL SWITCH: (Gasoline Engine Only) Located on the side of  
the engine cover.  
ENGINETHROTTLE AND CHOKE CONTROLS: Please refer  
to the engine owners manual for specific instructions.The electric  
motor switch ( electric motor only) located on the motor — is  
used to start and stop the mixer.  
DUMP LATCH: To dump the tub, grasp the dump handle and  
lift the dump latch, then rotate the tub to discharge the mix.After,  
discharge, return the tub to the vertical mixing position.  
CLUTCH  
GENERAL  
The paddle shaft and mixing blades are engaged and  
disengaged by tightening and loosening the drive belts with a  
spring loaded idler pulley. To engage the clutch, rotate the  
lever locates at the front of the mixer counterclockwise. The  
spring maintains the correct belt tension. To disengage the  
clutch, rotate the lever clockwise against the lever stop. The  
engine base is slotted to adjust for belt wear and to bring the  
idler pulley into operating range.  
The Essick EM-700 and EM-900 Series plaster and mortar  
mixers are quality mixers that have a batch capacity of 2.5 and  
3.5 bags respectively.With proper care, they will give continuous  
service year-after-year.  
GASOLINE ENGINE CARE  
For care and operation of the gasoline engine, refer to the  
engine manufacturer’s operating instructions furnished with the  
engine. We recommend draining and refilling the engine  
crankcase at least every thirty hours of operation. Check the  
engine oil level daily.  
CAUTION: Stop the engine before allowing anybody to put  
their hands in the mixing drum.  
ELECTRIC MOTOR CARE  
WHEEL BEARINGS  
For lubrication care and operation of the electric motor, refer to  
your electric motor instruction booklet furnished with the motor.  
After every 3 months of operation, remove the hub dust cap  
and inspect the wheel bearings.Once a year, or when required,  
disassemble the wheel hubs remove the old grease and  
repack the bearings forcing grease between rollers, cone and  
cage with a good grade of high speed wheel bearing grease  
(never use grease heavier than 265 A.S.T.M.penetration “No.  
2.”) Fill the wheel hub with grease to the inside diameter of the  
outer races and also fill the hub grease cap. Reassemble the  
hub and mount the wheel. Then tighten the adjusting nut, at  
the same time turn the wheel in both directions, until there is a  
slight bind to be sure all the bearing surfaces are in contact.  
Then back-off the adjusting nut 1/6 to 1/4 turn or to the nearest  
locking hole or sufficiently to allow the wheel to rotate freely  
within limits of .001" to .010" end play.Lock the nut at this position.  
Install the cotter pin and dust cap, and tighten all hardware.  
Protect the electric motor from dust as much as possible and  
keep ventilating openings clean. Do not spray water on the  
electric motor.  
Refer to the following chart. For recommend plug sizes.  
115 VOLT 1Ø  
EM 700  
230 VOLT 1Ø  
EM 900  
MOTOR  
PIGTAIL CAP CONN BODY PIGTAIL CAP CONN BODY  
HORSE  
POWER  
NEMA/  
NEMA/  
NEMA/  
NEMA/  
ESSICK  
ESSICK  
ESSICK  
ESSICK  
1½ & 3 HP L5-30P/940545 L5-30R/940546 L6-15P/940550 L6-15R/940551  
PAGE 8 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — OPERATIONS  
PADDLE SHAFT BEARING  
IMPORTANT — DRUM HEAD SEAL CARE  
The paddle shaft in the Essick Mixer rotates in sealed ball  
bearings requiring no additional lubrication.  
On each end of the mixing drum is a drum head containing self  
adjusting paddle shaft seals. These seals consist of packing  
rings, split glands and spring actuated adjusters. A properly  
maintained seal prevents material from working around the  
paddle shaft, causing excessive wear. The following is a  
suggested procedure of maintenance for protection of the  
paddle shaft and bearings:  
BEARING BRACKET  
Grease the bearing bracket every month.  
A. Keep the drum head clean of plaster built up, so the spring  
adjusters will be free to work.  
COUNTERSHAFT  
The countershaft rotates on two self-aligned pillow block  
bearings. Grease these every 40 hours using grade #1 Lithium  
Base grease.  
B. Replace with one new ring of packing and waterproof grease  
when split gland or pressure plate is about to bottom out against  
the end of the drum.  
New Packing  
GEAR ALIGNMENT  
When the old packing is to be completely replaced, coat shaft  
and packing generously with a good grade of waterproof  
grease and insert packing rings. Tighten the two spring  
adjuster nuts on each end until the spring is compressed to  
1¾ inches or the top of the adjusting nut is even with the top of  
the drum head.  
The countershaft and driven pinion are mounted on a slotted  
base. To align gears, loosen pillow block mounting bolts and  
move them until the necessary alignment has been made.  
GEAR LUBRICATION  
The surface of the pinion and the bull gear should be very  
lightly greased every 250 hours.  
Also, whenever the paddle shaft is removed, new waterproof  
grease should be packed around the ball bearings in the drum  
heads before reinstalling the shaft. Fill the cavity completely.  
IMPORTANT! AVOID OVER-GREASING.  
EXCESS GREASE WILL ACCUMULATE  
CONTAMINATES  
PREMATUREWEAR.  
AND  
CAUSE  
DRUM GRILL  
The drum opening is covered by a steel grill that is hinged for  
easy cleaning. This grill should be closed at all times when  
mixer is in use. Do not remove the grill or grill opening bar.  
Keep the grill clean by washing it down daily.  
CAUTION: Stop the engine before allowing anybody to put  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — OPERATIONS  
their hands in the mixing drum.  
STEP 1  
TOWING — Before towing, check with local and state  
laws for proper compliance.  
The tow bar and chain must be properly attached to the mixer  
and towing vehicle prior to towing. Refer to the following  
installation instruction:  
DRAW BAR  
Step 1. Insert the Draw Bar into the main frame. Secure, utilizing  
the ¾" bolt (grade 5) and nylock nut.Tighten to 100 foot pounds.  
BOLT & NUT  
Step 2. Install the chain through the hole located between the  
frame gusset and frame angle. Loop the chain together and  
place under the Draw Bar.Secure with connector link.  
Step 3. Extend the chain along the length of the Draw Bar,  
remove excess chain (slack) and secure to bottom connector  
link. Secure the chain to the towing vehicle, using the  
connector link.  
INSERT CHAINTHROUGH  
THE HOLE  
STEP 2  
NOTE: It is critical that the length of chain be properly adjusted  
to prevent the Draw Bar and front mixer stand from  
dropping to the ground (contact) in the event the Draw  
Bar becomes disconnected from the towing vehicle.  
DRAW BAR  
FRAME ANGLE  
DANGER  
BEFORETOWING  
FRAME GUSSET  
CONNECTOR LINK  
BALL HITCH COUPLER  
STEP 3  
VEHICLE  
CONNECTOR LINK  
1.  
Check vehicle hitch, ball, and coupler for signs of wear or  
damage. Replace any parts that are worn or damaged  
before towing.  
DRAW BAR  
2.  
Use only the 2" ball diameter as indicated on your coupler.  
Use of any other ball diameter will create an extremely  
dangerous condition which can result in separation of the  
coupler and ball or ball failure.  
REMOVE EXCESS  
CHAIN (SLACK)  
3.  
4.  
Be sure the coupler is secured to the hitch ball and the  
lock lever is down tight and locked.  
BOTTOM CONNECTOR LINK  
Recheck tightness again after towing about 50 miles.  
Check that trailer safety chains are properly connected.  
SAFETY CHAIN .........................................P/N 13363  
CONNECTOR LINK ...................................P/N 01004  
RECOMMENDED MAINTENANCE  
1.  
Smear ball socket and clamp face with chassis grease.  
Periodically oil pivot points and solutions surfaces of  
coupler with SAE 30 wt. motor oil.  
2.  
When parking or storing your trailer.Keep the coupler off  
the ground so dirt will not build up in the ball socket.  
DANGER  
If housing is deformed,  
replace complete coupler.  
USE ONLY GENUINE  
FULTON REPAIR KITS.  
PAGE 10 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — OPERATIONS  
CLEANING — BLADE ADJUSTMENTS  
ENDSCRAPER  
Always disconnect the spark plug wire before cleaning the inside  
of the drum.  
Never pour or spray water over the gasoline engine or electric  
motor.  
For consistent performance, long life and high quality mixing,  
thoroughly clean the mixer inside and out at the end of each  
day’s operation.To prevent lumps of dried mortar from forming  
and contamination of future batches, do not allow a buildup of  
materials to form on the blades or anywhere inside the drum.  
The following is the recommended wiper blade adjustments:  
1) STEEL DRUM MIXERS  
SIDESCRAPER  
2) POLYETHYLENE DRUM MIXERS  
The poly blade should come as close as possible to the surface  
without touching. If material builds up on the drum, you may  
use a rubber mallet to dislodge the material without adverse  
effect to the drum.  
IMPORTANT NOTICE  
EPOXY COMPATIBILITY — There are some expoxies and  
other chemicals used in certain applications that are not  
compatible with polyethylene tubs.  
Since Whiteman Industries cannot control the end user’s  
application of this product, we will not assume responsibility  
for the resulting damages when exposed to incompatible  
chemicals.  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — SPECIFICATIONS  
EM-700S SPECIFICATIONS  
MODEL  
U.S.(inch)  
METRIC  
CAPACITY ....................................................7 CUBIC FEET ....................................................... 198 LITERS  
BAG CAPACITY .............................................1½ - 2½ ............................................................ 1½ - 2½  
WEIGHT (appROX.) ......................................792 LBS. ............................................................. 357 KG.  
L
X
W
X
H ..................................................71  
X
50  
X
56 IN. .................................................. 180  
X
127  
X
142 CM.  
LENGTH W/TOW BAR ......................................98 IN. ................................................................. 248 CM.  
HEIGHT W/DUMP HANDLE ................................73 IN. ................................................................. 185 CM.  
DISCHARGE HEIGHT .......................................21 IN. ................................................................. 53 CM.  
DRIVE .........................................................V-BELT TO GEAR ..................................................... —  
DUMP ACTION ..............................................MANUAL ............................................................... —  
EM-700P SPECIFICATIONS  
MODEL  
U.S.(inch)  
METRIC  
CAPACITY ....................................................7 CUBIC FEET ....................................................... 198 LITERS  
BAG CAPACITY .............................................1½ - 2½ ............................................................ 1½ - 2½  
WEIGHT (APPROX.).......................................691 LBS. ............................................................. 357 KG.  
L
X
W
X
H ..................................................71  
X
50  
X
56 IN. .................................................. 180  
X
127  
X
142 CM.  
LENGTH W/TOW BAR ......................................98 IN. ................................................................. 248 CM.  
HEIGHT W/DUMP HANDLE ................................73 IN. ................................................................. 185 CM.  
DISCHARGE HEIGHT .......................................21 IN. ................................................................. 53 CM.  
DRIVE .........................................................V-BELT TO GEAR ..................................................... —  
DUMP ACTION .............................................MANUAL .............................................................. —  
NOTE: In accordance with our established policy of constant improvement, we reserve the right to amend these specifications at anytime without notice.  
PAGE 12 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE PAGE  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLANATION OF CODE IN REMARKS COLUMN  
How to read the marks and remarks used in this parts book.  
Section 1: Items Found In the “Remarks” Column  
Serial Numbers-Where indicated, this indicates a serial  
number range (inclusive) where a particular part is used.  
Model Number-Where indicated, this shows that the  
corresponding part is utilized only with this specific model  
number or model number variant.  
Section 2: Items Found In the “Remarks” Column  
Serial Numbers-Where indicated, this indicates a serial number  
range (inclusive) where a particular part is used.  
Model Number-Where indicated, this shows that the  
corresponding part is utilized only with this specific model number  
or model number variant.  
Section 3: Items Found In theItems NumberColumn  
All parts with same symbol in the number column, , #,  
, belong to the same assembly or kit.  
+
, %, or  
*
Note: If more than one of the same reference number is listed,  
the last one listed indicates newest (or latest) part available.  
NOTE  
If more than one of the same reference number is  
listed, the last one listed indicates newest (or latest)  
part available.  
NOTE  
The contents of this catalog are  
subject to change without notice.  
PAGE 14 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — SUGGESTED SPARE PARTS  
EM-700S/P  
EM-700S/P  
1 to 4 Units  
5+ Units  
Qty.  
P/N  
Description  
Qty.  
P/N  
Description  
3 ......... EM505834........... V-BELT  
5 ......... EM505834........ V-BELT  
3 ......... EM507846........... V-BELT, w/ELECTRIC MOTOR  
6 ......... 491010 ................ LATCH ASSY  
3 ......... EM203010........... BLADE KIT STEEL DRUM  
3 ......... EM204624........... BLADE KIT POLY DRUM  
12 .......EM200301........... PACKING RING  
4 ......... EM200794........... SPRING  
5 ......... EM507846........ V-BELT, w/ELECTRIC MOTOR  
10 .......491010 ............. LATCH ASSY  
5 ......... EM203010........ BLADE KIT (700S) STEEL DRUM  
5 ......... EM204624........ BLADE KIT (700P) POLY DRUM  
24 .......EM200301........ PACKING RING  
8 ......... EM200794........ SPRING  
8 ......... EM200286........ SPECIAL BOLT  
4 ......... EM200286........... SPECIAL BOLT  
1 ......... 3351 .................... PINION GEAR  
2 ......... EM902153........ BEARING  
1 ......... EM940734........ SWITCH, ON/OFF  
1 ......... 509171 ............. DUMP HANDLE, POLY DRUM  
2 ......... 3351 ................. DRIVEN PINON GEAR  
1 ......... EM201537........ DUMP HANDLE, STEEL DRUM  
2 ......... 3065 ................. SEAL, AXLE  
2 ......... 3469 ................. DUST CAP, AXLE  
2 ......... EM903049........ BEARING CONE UPTO S/N 9896000  
2 ......... EM903113........ BEARING CONE STARTING S/N 2080000  
2 ......... EM903012........ BEARING CUP  
NOTE  
Part numbers on this Suggested  
Spare Parts List may supercede/  
replace the P/N shown in the text  
pages of this book.  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — DRUM HEAD AND PADDLE SHAFT ASSY  
DRUM HEAD  
EMBLY  
27  
26  
25  
28  
TO
PAGE 16 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — DRUM HEAD AND PADDLE SHAFT ASSY  
DRUM HEAD AND PADDLE SHAFT ASSY  
DRUM HEAD PARTS  
NO.  
1
2
PART NO.  
PART NAME  
PADDLE SHAFT  
U-BOLT  
NUT HEX ½-13  
U-BOLT INSERT  
COLLAR  
QTY.  
1
2
4
4
1
2
REMARKS  
EM507274  
EM200297  
EM968011  
EM200292  
EM200018  
EM902153  
EM507720  
500076  
EM916019  
EM200288  
EM200286  
EM200285  
EM200303  
EM200301  
EM201648  
EM507272  
EM200794  
EM200287  
EM966048  
3
4
5
6
6
7
8
BEARING  
DUMP BEARING .................................................................... 2 ................ FROM S/N 98624071  
DUMP BEARING .................................................................... 2 ................ FROM S/N 9862400 TO 9862470  
GREASE ZERK ...................................................................... 2 ................ REPLACES 491705  
ADJUSTING PLATE  
SPECIAL BOLT  
PACKING GLAND HALF  
FOLLOWER  
2
4
4
2
9
10  
11  
12  
13  
13  
14  
15  
16  
PACKING RING  
12  
DRUM HEAD .......................................................................... 2 ................ FROM S/N 98624071  
DRUM HEAD .......................................................................... 2 ................ FROM S/N 9862400 TO 9862470  
SPRING  
ADJUSTING NUT  
BOLT  
4
4
8
PADDLE SHAFT ASSEMBLY  
NO.  
16  
17  
18  
19  
PART NO.  
PART NAME  
PADDLE ARM-TOW END  
PADDLE ARM-CENTER  
PADDLE ARM-ENGINE END  
PADDLE ARM-CENTER  
TOP STEEL BLADE  
QTY.  
1
REMARKS  
EM202899  
EM202897  
EM202898  
EM202896  
EM202928  
1
1
1
20 #  
4
*
21 EM923638  
22  
EM202927  
DRUM END STEEL BLADE2  
*
EM202929  
TOP RUBBER BLADE (STEEL) DRUM ONLY  
TOP PLASTIC BLADE (POLY) DRUM ONLY  
DRUM END PLASTIC BLADE (POLY) DRUM ONLY  
DRUM END RUBBER BLADE (STEEL) DRUM ONLY  
BOLT ½-13 X 3-3/4  
LOCKWASHER ½  
HEX NUT ½-13  
SPACER, BULL GEAR  
4
4
2
2
1
1
1
1
*
22#  
23#  
23  
EM507497  
EM507496  
EM202926  
EM963110  
EM923638  
EM968011  
EM507251  
EM203010  
EM204624  
EM203029  
*
25  
26  
27  
28  
BLADE KIT, (STEEL) DRUM ONLY ......................................... 1 ................ INCLS w/ AND MTG. & HDWR  
BLADE KIT, (POLY) DRUM ONLY............................................ 1 ................ INCLS w/# AND MTG. & HDWR  
HARDWARE KIT, (RUBBER/POLY BLADES) .......................... 1 ................ INCLUDED IN BLADE KITS  
*
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S — STEEL DRUM  
STEEL DRUM  
109  
108  
110 111  
PAGE 18 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S — STEEL DRUM  
STEEL DRUM  
NO.  
100  
101  
101  
101  
102  
103  
104  
105  
PART NO.  
EM201537  
EPC-1  
EBC-1  
HBC-1  
EM963580  
EM969038  
EM203333  
EM507271  
EM507767  
EM507768  
PART NAME  
DUMP HANDLE  
QTY.  
1
REMARKS  
*
TOWING TONGUE (P. EYE) ................................... 1 .............. NO LONGER AVAILABLE  
TOWING TONGUE (PIN HOLE) ............................. 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM  
TOWING TONGUE (BALL HITCH) ......................... 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM  
CAP SCREW .......................................................... 1 .............. REPLACES 505067  
LOCK NUT ............................................................. 1 .............. REPLACES 505069  
DRUM GRILL  
1
1
*
*
GRILL OPEN BAR  
106+  
DRUM ASSY (STEEL) ............................................ 1 .............. INCLS. ITEMS w/  
DRUM & SHAFT ASSY. (COMPLETE) (STEEL) ..... 1 .............. INCLS. ITEMS w/+ AND DRUM HEAD &  
*
PADDLE SHAFT ASSY  
108  
109  
110  
111  
EM506309  
507264  
EM507421  
EM507835  
13363  
MAIN FRAME  
CLUTCH LEVER  
DUMP LATCH  
CLEVIS PIN  
SAFETY CHAIN  
5/16" CONNECTOR LINK  
1
1
1
1
1
2
01004  
ILLUSTRATED ON PAGE 10  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700P — POLYETHYLENE DRUM  
POLYETHYLENE  
DRUM  
122  
123  
128  
129  
PAGE 20 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700P — POLYETHYLENE DRUM  
POLYETHYLENE DRUM  
MODEL EM-700P  
NO.  
115  
PART NO.  
EM506311  
EM507414  
504534  
504535  
507493  
509171  
EM507413  
EM509603  
PART NAME  
QTY.  
1
REMARKS  
PLASTIC DRUMW/O GRATES  
SUPPORT REAR  
STATIONARY GRATE  
MOVEABLE GRATE  
GRATE OPEN BAR  
DUMP HANDLE  
*
116  
117  
118  
119  
120  
121  
1
1
1
1
1
1
*
*
*
*
DRUM SUPPORT  
DRUM & SHAFT ASSY (COMPLETE) (POLY) ........................ 1 ..................... INCLS ITEMS w/ AND HEAD  
*
END & PADDLE SHAFT ASSY  
122  
123  
124  
125  
126  
127  
128  
129  
EM963610  
EM969013  
504987  
EM969079  
505196  
505066  
492392  
492584  
HHCS 3/8" NC X ¼" G-5 ........................................................ 7 ..................... REPLACES 492376  
LOCK NUT 3/8" NC ................................................................ 7 ..................... REPLACES 492583  
FHCS ¼" NC X 1" G-5  
LOCK NUT ¼" NC .................................................................. 8 ..................... REPLACES EM492581  
3/8 X 1½" HHCS  
3/8" LOCKNUT  
8
8
8
3
3
½" X 1 NC G-5 BOLT  
½" LOCK NUT  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — GAS ENGINES, PULLEYS & CAB ASSEMBLY  
CAB ASSEMBLY  
PAGE 22 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — GAS ENGINES, PULLEYS & CAB ASSEMBLY  
CAB ASSEMBLY & GAS ENGINES  
COMMON PARTS  
NO.  
150  
151  
152  
153  
154  
155  
156  
157  
158  
159  
167  
168  
169  
170  
171  
PART NO.  
EM507159  
491010  
PART NAME  
CAB ASSEMBLY  
QTY.  
1
REMARKS  
LATCH ASSEMBLY ................................................2......... REPLACES 504744  
EM505671  
EM959080  
EM102014  
EM901515  
EM905016  
EM203098  
3351  
EM940734  
502226  
JISB2804C25  
500214  
DRIVE GEAR 16-½ DIA.  
ROD END  
SPRING  
IDLER PULLEY  
PILLOW BLOCK BEARING  
SPRING CLIP  
DRIVEN PINION GEAR .........................................1......... REPLACES 500272  
SWITCH, ON/OFF  
COUNTER SHAFT  
1
2
1
1
2
1
1
1
SNAP RINGS .........................................................2......... REPLACES 490957  
KEY  
KEY  
1
1
1
EM010023  
EM963064  
BOLT HEX 3/8 X 16 X 3-1/4  
MODEL EM 700 w/HONDA  
NO.  
161  
161  
162  
163  
163  
164  
165  
166  
PART NO.  
PART NAME  
QTY.  
REMARKS  
GX240K1HA2  
GX160K1HX2  
492057  
EM901074  
492055  
EM505834  
EM507490  
EM507491  
HONDA ENGINE GX240 K1HA 8HP ......................1......... REPLACES 493261  
HONDA ENGINE GX160 5.5HP ENG.  
DRIVEN PULLEY-LARGE  
DRIVE PULLEY-SMALL 1" BORE-8HP HONDA  
DRIVE PULLEY-5.5 HP HONDA  
V-BELT  
THREADED ROD  
IDLER ARM  
1
1
1
1
2
1
1
MODEL EM 700 w/WISCONSIN  
NO.  
161  
162  
163  
164  
165  
166  
PART NO.  
EM937171  
EM505204  
505205  
PART NAME  
QTY.  
REMARKS  
ENGINEWISCONSIN BKN2-408472 .....................1......... REPLACES 505208  
DRIVEN PULLEY  
DRIVE PULLEY  
V-BELT  
THREADED ROD  
IDLER ARM  
1
1
2
1
1
507775  
EM507771  
EM203352  
MODEL EM 700 w/ROBIN  
NO.  
161  
161  
162  
163  
164  
165  
166  
PART NO.  
PART NAME  
QTY.  
REMARKS  
W1280800466  
EH252YR0000  
492057  
ROBIN ENGINE 8HP EY-28 ...................................1......... UPTO OCTOBER, 1999  
ROBIN ENGINE 8HP EH25-2 ................................1......... STARTING OCTOBER, 1999, REPLACES 493260  
DRIVEN PULLEY-LARGE  
DRIVE PULLEY-SMALL  
V-BELT  
1
1
2
1
1
492054  
EM505834  
EM507490  
EM203352  
THREADED ROD  
IDLER ARM  
MODEL EM-700 w/B&S  
NO.  
161  
161  
162  
163  
164  
165  
166  
PART NO.  
1964521049  
1352321036E1  
492057  
PART NAME  
QTY.  
REMARKS  
B&S ENGINE 8HP .........................................................1........... REPLACES 493181  
B&S ENGINE 5HP  
DRIVEN PULLEY-LARGE  
DRIVE PULLEY-SMALL 1" BORE  
V-BELT  
THREADED ROD  
IDLER ARM  
1
1
1
2
1
1
EM901074  
EM505834  
EM507490  
EM507491  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — ELECTRIC MOTOR & PULLEYS  
CAB ASSEMBLY  
PAGE 24 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — ELECTRIC MOTOR & PULLEYS  
ELECTRIC MOTOR & PULLEYS  
NO.  
161  
162  
163  
164  
165  
166  
PART NO.  
PART NAME  
QTY.  
REMARKS  
P145K17DB45A  
EM505204  
502213  
EM507846  
EM507490  
EM507713  
507715  
ELECTRIC MOTOR 1.5 H.P................ 1 ..................... REPLACES 939275 & 3197  
DRIVEN PULLEY  
DRIVE PULLEY .................................. 1 ..................... REPLACES 901019  
V-BELT  
THREADED ROD  
IDLER ARM  
1
2
1
1
GUIDE, V-BELT ................................... 1 ..................... NOT ILLUSTRATED  
FOR COMMON PARTS SEE PAGE 23  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — AXLE & WHEEL GROUP  
PAGE 26 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-700S & 700P — AXLE & WHEEL GROUP  
AXLE &WHEEL GROUP  
NO.  
200  
200  
201 #  
202  
203  
204  
204  
205  
PART NO.  
EM507407  
511334  
3065  
504708  
507444  
3068  
8164  
0183  
3005  
PART NAME  
QTY.  
REMARKS  
AXLE, RIGID.................................... 1 .......................... UP TO S/N 98960000  
AXLE, RIGID.................................... 1 .......................... STARTING S/N 20800000  
SEAL  
THICK SPACER .............................. 2 .......................... 3/4" INSIDE DIAMETER  
THIN SPACER ................................. 2 .......................... 3/4" INSIDE DIAMETER  
AXLE NUT ....................................... 2 .......................... UP TO S/N 98960000  
AXLE NUT ....................................... 2 .......................... STARTING S/N 20800000  
2
*
COTTER PIN  
RIM & TIRE ONLY  
2
2
206  
208  
EM942000  
3469  
8115  
VALVE STEM ................................... 1 .......................... REPLACES 942052  
209 #  
DUST CAP  
LUG NUT  
2
8
*
210 #  
211  
*
EM903049  
EM903113  
EM903012  
3504  
BEARING CONE ............................. 2 .......................... UP TO S/N 9896000  
BEARING CONE ............................. 2 .......................... STARTING S/N 20800000  
*
211#  
212 #  
BEARING CUP  
2
*
213  
HUB, w/BEARING CUP ................... 2 .......................... UP TO S/N 9896000, INCLUDES ITEMS w/  
HUB, w/BEARING CUP ................... 2 .......................... STARTING S/N 20800000, INCLUDES ITEMS w/#  
*
213  
EM941306  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Effective: July 1, 2000  
TERMS AND CONDITIONS OF SALE — PARTS  
PAYMENTTERMS  
4. Freight is at the sender’s expense. All  
partsmustbereturnedfreightprepaidto  
Multiquip’sdesignatedreceivingpoint.  
PRICINGANDREBATES  
Terms of payment for parts are net 30 days.  
Prices are subject to change without prior  
notice.Pricechangesareeffectiveonaspecific  
dateandallordersreceivedonorafterthatdate  
willbebilledattherevisedprice.Rebatesfor  
price declines and added charges for price  
increaseswillnotbemadeforstockonhand  
atthetimeofanypricechange.  
5. Parts must be in new and resalable  
condition,intheoriginalMultiquippackage  
(ifany),andwithMuiltiquippartnumbers  
clearlymarked.  
FREIGHTPOLICY  
All parts orders will be shipped collect or  
prepaidwiththechargesaddedtotheinvoice.  
All shipments are F.O.B. point of origin.  
Multiquip’s responsibility ceases when a  
signedmanifesthasbeenobtainedfromthe  
carrier,andanyclaimforshortageordamage  
mustbesettledbetweentheconsigneeandthe  
carrier.  
6. Thefollowingitemsarenotreturnable:  
Multiquipreservestherighttoquoteandsell  
directtoGovernmentagencies,andtoOriginal  
EquipmentManufactureraccountswhouse  
our products as integral parts of their own  
products.  
a. Obsolete parts.(If an item is listed  
in the parts price book as being  
replaced by another item, it is  
obsolete.)  
b. Any parts with a limited shelf life  
(such as gaskets, seals, “O” rings,  
andotherrubberparts)thatwere  
purchasedmorethansixmonths  
priortothereturndate.  
MINIMUMORDER  
SPECIALEXPEDITINGSERVICE  
TheminimumchargeforordersfromMultiquip  
is $15.00 net. Customers will be asked for  
instructionsregardinghandlingofordersnot  
meetingthisrequirement.  
A$20.00to$50.00surchargewillbeaddedto  
theinvoiceforspecialhandlingincludingbus  
shipments, insured parcel post or in cases  
where Multiquip must personally deliver the  
partstothecarrier.  
c. Anylineitemwithanextendeddealer  
netpriceoflessthan$5.00.  
d. Special order items.  
RETURNEDGOODSPOLICY  
e. Electricalcomponents.  
LIMITATIONSOFSELLER’SLIABILITY  
Returnshipmentswillbeacceptedandcredit  
will be allowed, subject to the following  
provisions:  
f.  
Paint,chemicals,andlubricants.  
Multiquip shall not be liable here under for  
damagesinexcessofthepurchasepriceofthe  
item with respect to which damages are  
claimed, and in no event shall Multiquip be  
liable for loss of profit or good will or for any  
other special, consequential or incidental  
damages.  
g. Decalsandpaperproducts.  
h. Itemspurchasedinkits.  
1. AReturnedMaterialAuthorizationmust  
beapprovedbyMultiquippriortoshipment.  
7. Thesenderwillbenotifiedofanymaterial  
receivedthatisnotacceptable.  
2. ToobtainaReturnMaterialAuthorization,  
alistmustbeprovidedtoMultiquipParts  
Sales that defines item numbers,  
quantities,anddescriptionsoftheitems  
tobereturned.  
8. Such material will be held for 5 working  
days from notification, pending  
instructions. If a reply is not received  
within5days,thematerialwillbereturned  
tothesenderathisexpense.  
LIMITATIONOFWARRANTIES  
a. Thepartsnumbersanddescriptions  
mustmatchthecurrentpartsprice  
list.  
Nowarranties,expressorimplied,aremade  
in connection with the sale of parts or trade  
accessories nor as to any engine not  
manufacturedbyMultiquip.Suchwarranties  
made in connection with the sale of new,  
complete units are made exclusively by a  
statement of warranty packaged with such  
units, and Multiquip neither assumes not  
authorizes any person to assume for it any  
other obligation or liability whatever in  
connectionwiththesaleofitsproducts.Apart  
fromsuchwrittenstatementofwarranty,there  
arenowarranties,express,impliedorstatutory,  
which extend beyond the description of the  
productsonthefacehereof.  
9. Creditonreturnedpartswillbeissuedat  
dealer net price at time of the original  
purchase,lessa15%restockingcharge.  
b. Thelistmustbetypedorcomputer  
generated.  
10. In cases where an item is accepted for  
which the original purchase document  
can not be determined, the price will be  
basedonthelistpricethatwaseffective  
twelvemonthspriortotheRMAdate.  
c. Thelistmuststatethereason(s)for  
thereturn.  
d. The list must reference the sales  
order(s)orinvoice(s)underwhich  
theitemswereoriginallypurchased.  
11. Credit issued will be applied to future  
purchasesonly.  
e. Thelistmustincludethenameand  
phonenumberoftheperson  
requestingtheRMA.  
3. A copy of the Return Material  
Authorizationmustaccompanythereturn  
shipment.  
PAGE 28 — ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE PAGE  
ESSICK EM-700S & 700P — PARTS & OPERATION MANUAL — REV. #8 (03/17/08) — PAGE 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS AND OPERATION MANUAL  
HERE'S HOW TO GET HELP  
PLEASE HAVETHE MODEL AND SERIAL  
NUMBER ON-HANDWHEN CALLING  
UNITED STATES  
Multiquip Corporate Office  
18910 Wilmington Ave.  
Carson, CA 90746  
MQ Parts Department  
800-427-1244  
Tel. (800) 421-1244  
Fax (800) 537-3927  
Fax:800-672-7877  
Fax:310-637-3284  
310-537-3700  
Contact: [email protected]  
Mayco Parts  
800-306-2926  
310-537-3700  
Warranty Department  
800-421-1244, Ext. 279 Fax:310-537-1173  
310-537-3700, Ext. 279  
Fax:800-672-7877  
Fax:310-637-3284  
Service Department  
800-421-1244  
Technial Assistance  
800-478-1244  
Fax:310-537-4259  
Fax:310-631-5032  
310-537-3700  
^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668  
MEXICO  
MQ Cipsa  
UNITED KINGDOM  
Multiquip (UK) Limited Head Office  
Carr. Fed. Mexico-Puebla KM 126.5  
Momoxpan, Cholula, Puebla72760Mexico  
Tel: (52) 222-225-9900  
Fax: (52) 222-285-0420  
Hanover Mill, Fitzroy Street,  
Ashton-under-Lyne,  
Lancashire OL7 0TL  
Tel: 0161 339 2223  
Fax: 0161 339 3226  
CANADA  
Multiquip  
BRAZIL  
Multiquip  
4110IndustrielBoul.  
Laval, Quebec, Canada H7L 6V3  
Tel: (450) 625-2244  
Fax: (450) 625-8664  
Av. Evandro Lins e Silva, 840 - grupo 505 Tel: 011-55-21-3433-9055  
Barra de Tijuca - Rio de Janeiro Fax: 011-55-21-3433-9055  
© COPYRIGHT 2005, MULTIQUIP INC.  
Multiquip Inc, the MQ logo and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other  
trademarks are the property of their respective owners and used with permission.  
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.  
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations are based on the MQ SP4 Saw. Illustrations,  
descriptions, references and technical data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to  
discontinue or change specifications, design or the information published in this publication at any time without notice and without incurring any obligations.  
Your Local Dealer is:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eizo Computer Monitor L760T C User Manual
Extron electronic Network Card MTP 15HD RSA User Manual
Fire Magic Gas Grill E1060 User Manual
Fostex Microphone SF20C User Manual
FujiFilm Recording Equipment AVR 4802 User Manual
Fujitsu Server T5120 User Manual
Fusion Car Amplifier RE AM45020 User Manual
GBC Paper Shredder 1246S 1 User Manual
GE Oven SCA1000 User Manual
Goodman Mfg Air Conditioner CKLB18 1 User Manual