This manual is checked under the browser
settings shown below. Text size can change for
another one through browser setting.
Microsoft Internet Exproler:
Text size: Medium
Encoding: Western European
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can be life
threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or property
or product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2005 EIZO NANAO CORPORATION All rights reserved. No part of this manual
may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO
CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or
information confidential unless prior arrangements are made pursuant to EIZO NANAO
CORPORATION's receipt of said information. Although every effort has been made to ensure that
this manual provides up-to-date information, please note that EIZO monitor specifications are
subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards
Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager is a trademark of EIZO NANAO CORPORATION.
ScreenManager, FlexScan and EIZO are registered trademarks of EIZO NANAO CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
IMPORTANT!
●
This product has been adjusted specifically for use in the region to which it was originally shipped.
If operated outside the region to which it was originally shipped, the product may not perform as
stated in the specifications.
●
To ensure personal safety and proper maintenance, please read this section and the caution
statements on the unit (refer to the figure below).
[Location of the Caution Statements]
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may
result in fire, electric shock, or equipment damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet
or spillage into the cabinet may result in fire, electric shock, or equipment
damage. If an object or liquid falls/spills into the cabinet, unplug the unit
immediately. Have the unit checked by a qualified service engineer before
using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or
equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a
damaged unit. Using a damaged unit may result in fire or electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
●
●
●
●
●
Do not place outdoors.
Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
Do not place in a dusty or humid environment.
Do not place in a location where the steam comes directly on the screen.
Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away from
babies and children.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.Not doing so may result in fire or electric
shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
●
The unit is designed for use with a specific voltage only. Connection to
another voltage than specified in this User's Manual may cause fire, electric
shock, or equipment damage.
●
Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord with care.
●
●
Do not place the cord underneath the unit or other heavy objects.
Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric
shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user's manual of the arm
stand and install the unit securely with the enclosed screws.
Not doing so may cause the unit to come unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do
not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock. When reattaching the tilt stand, please use the same screws and
tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some
physical symptoms result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with
the cord attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not block the ventilation slots on the cabinet.
●
●
●
Do not place any objects on the ventilation slots.
Do not install the unit in a closed space.
Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment
damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
LCD Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
In order to suppress the luminosity change by long-term use and to maintain the
stable luminosity, use of a monitor in lower brightness is recommended.
The screen may have defective pixels. These pixels may appear as slightly light or
dark area on the screen. This is due to the characteristics of the panel itself, and not
the product.
The backlight of the LCD panel has a fixed life span. When the screen becomes
dark or begins to flicker, please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in
damage to the screen. There will be prints left on the screen if the pressed image is
dark or black. If pressure is repeatedly applied to the screen, it may deteriorate or
damage your LCD panel. Leave the screen white to decrease the prints.
When the screen image is changed after displaying the same image for extended
periods of time, an afterimage may appear. Use the screen saver or timer to avoid
displaying the same image for extended periods of time.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur inside and outside the monitor. In that case, do not turn the
monitor on and wait until dew condensation disappears, otherwise it may cause
some damages to it.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in
damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
●
●
●
24" wide format LCD
Dual inputs compliant (DVI-I x 2)
●
[Horizontal scanning frequency] Analog: 24 - 94 kHz
Digital: 31 - 76 kHz
[Vertical scanning frequency] Analog: 49 - 86 Hz (1600x1200: 49-76Hz/1920x1200: 49 -61Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
[Resolution] 1920 dots x 1200 lines
●
●
Frame Synchronous mode supported (59 - 61 Hz)
Smoothing function incorporated for the adjustment of an enlarged image
●
●
FineContrast modes, to select the most suitable mode for screen display
The utility software "ScreenManager Pro for LCD" (for Windows) which can control the monitor
from a PC with a mouse or keyboard is included (refer to the EIZO LCD Utility Disk).
●
The ArcSwing Stand enables to adjust the monitor height and monitor angle freely
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
●
●
●
●
●
●
●
●
●
●
LCD Monitor
Power Cord
Analog Signal Cable (FD-C16)
Digital Signal Cable (FD-C39)
EIZO USB Cable (MD-C93)
"EIZO LCD Utility Disk" CD-ROM
User's Manual (in the CD-ROM)
Setup Manual
LIMITED WARRANTY
Mounting Screws (M4 x 12 mm, 6 pcs)
●
Please retain the packing materials for future transference.
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3. Controls & Connectors
Front
(1) ScreenManager®
(2) FineContrast Menu
Monitor Adjustment menu
Directly touching the left or right button allows you to select a
FineContrast mode.
(3) Input Signal Selection Switch (SIGNAL) Switch the input signals when connecting 2 PCs.
Adjust the screen to appropriate condition automatically (analog
(4) Auto Adjustment Switch (AUTO)
input only).
Show the ScreenManager on the screen.
Confirm the setting / adjustment function.
Save the adjustment values.
(5) Enter Switch (ENTER)
Select the desired function.
Increase and decrease the adjustment value.
(6) Directing Switch (Left, Down, Up, Right)
(7) Power Switch
ON or OFF the monitor's power.
Indicate monitor's operation status.
Blue: Operation
Flashing blue: Last 15 min. of operation time before entering the
(8) Power Indicator
Yellow: Power saving
Off: Power off
Rear
Download from Www.Somanuals.com. All Manuals Search And Download.
The LCD monitor can be used with an optional arm stand by removing the stand
(9) Stand (Detachable)
(10) Security Lock Slot
Allows for connection of a security cable. This lock supports Kensington's
MicroSaver security system. For further information, please consult:
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403 USA
Tel.: 800-650-4242, x3348, Intl: 650-572-2700, x3348
Fax: 650-572-9675
(11) Cable Holder
House the cables.
(12) Power Connector
Connect the power cord.
(13) DVI-I Input Connector x 2 Connect the signal cable .
(14) USB Port
USB Port upstream is used when using the software EIZO LCD Utility Disk.
(1 Upstream)
(15) USB Port
(2 Downstream)
Download from Www.Somanuals.com. All Manuals Search And Download.
2. CABLE CONNECTION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency)
in accordance with the charts below.
●
When your computer and display support VESA DDC, the suitable resolution and the refresh rate are
set by just plugging your display into the computer without any manual settings.
Analog Input
Resolution Frequency Dot Clock
Remarks
Apple Macintosh
VGA, VESA
VGA TEXT
VESA
640×480
640×480
720×400
800×600
832×624
1024×768
1152×864
1152×870
1280×960
1280×960
67Hz
~85Hz
70Hz
~85Hz
75Hz
~85Hz
75Hz
75Hz
60Hz
75Hz
Apple Macintosh
VESA
VESA
202.5 MHz
(Max)
Apple Macintosh
VESA
Apple Macintosh
VESA
1280×1024 ~85Hz
1600×1200 ~75Hz
VESA
1680×1050
60Hz
VESA CVT
VESA CVT,
VESA CVT RB
(Reduced Blanking)
1920×1200
60Hz
Digital Input
The monitor supports the following resolutions only.
Resolution Frequency Dot Clock
640×480
60Hz
Remarks
VGA
Download from Www.Somanuals.com. All Manuals Search And Download.
720×400
800×600
70Hz
60Hz
60Hz
60Hz
60Hz
60Hz
VGA TEXT
VESA
1024×768
1280×960
1280×1024
1600×1200
VESA
162 MHz
(Max)
VESA
VESA
VESA
VESA CVT,
VESA CVT RB
(Reduced Blanking)
1680×1050
1920×1200
60Hz
60Hz
VESA CVT RB
(Reduced Blanking)
2-2. Connecting the Signal Cable
●
Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor and the other end of
the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Connector of the
Signal Cable
PC
PC
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Output
Connector / D-Sub
mini 15 pin
Input Connector
(monitor) / D-Sub
mini
●
●
Standard graphics card
Power Macintosh G3
(Blue & White) / Power
Mac G4 (VGA)
Signal Cable (FD-C16 enclosed)
15 pin
Video Output
Connector / D-Sub
15
Signal Cable (FD-C16 enclosed) + Macintosh Adapter
(Optional)
pin
●
Macintosh
Input Connector
(monitor) / D-Sub
mini
15 pin
Digital Input
Signal Cable
Connector of the PC
PC
Video Output
●
●
Digital Graphics card
Power Mac G4/G5 (DVI)
Signal Cable (FD-C39 enclosed)
Connector / DVI
Input Connector
(monitor) / DVI
●
The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector).
2. Plug the power cord into the power connector on the rear of the monitor.
3. Plug the other end of the power cord into a power outlet.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord. Not doing so may
result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Lead the power cord and signal cable into the cable holder at rear of the monitor.
●
The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/
Landscape display.
5. Adjust the "height", "front and back position" and "angle" of the monitor.
Grip both side of the center part of the monitor and move
slowly (refer to the right figure.)
(1) Adjust the height of the monitor. To heighten, push the
monitor backward. To lower, pull the monitor forward.
(2) Adjust the position and angle of the monitor.
To adjust the angle of the monitor, hold the stand with one hand and tilt the monitor with another
hand by holding the upper side of the cabinet.
Download from Www.Somanuals.com. All Manuals Search And Download.
(3) If necessary, fine adjust the height of the monitor.
6. Turn on the monitor's Power switch and then turn on the PC's power.
The monitor's power indicator will light up (blue).
Whenever finished, turn off the PC and the monitor.
●
●
●
When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed
for a few seconds on the right top corner of the screen.
Adjust brightness of the screen depending on the brightness of your environment. Too dark or too
bright of a screen can cause eyestrain.
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
7. When using the software, ScreenManager Pro for LCD (for Windows), connect the
upstream port of the monitor to the downstream port of the USB compliant PC or
another hub with the USB cable.
After connecting the USB cable, the USB function can be set up automatically. For further details about
the "ScreenManager Pro for LCD", refer to the readme.txt in the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the
back of the monitor.
Connecting Examples
SIGNAL 1
SIGNAL 2
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C39 enclosed)
D-Sub
(Ex.1) Analog mini 15
pin
DVI Digital
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional)
D-Sub
(Ex.2) Analog mini 15
pin
D-Sub
mini Analog
15 pin
Signal Cable
Signal Cable
(FD-C39 enclosed)
(FD-C39 optional)
(Ex.3) Digital DVI
DVI Digital
Selecting the Active Input
The Input Signal Selection switch on the control panel can be used to select either SIGNAL 1 or SIGNAL
2 as the active input at any time. Every time the switch is touched, the input changes. When switching the
signal, the kind of the input signal (Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on the
right top corner of the screen.
The Priority Input Signal
Download from Www.Somanuals.com. All Manuals Search And Download.
This function is used to select which PC will have priority to control the monitor when utilizing two PCs.
The monitor constantly checks the input signals and switches automatically in accordance with the "Input
Priority" setting (see table below). Once a priority is set, whenever a change of signal is detected at the
selected input, the monitor will switch the input to that signal.
In the case of only one signal being present at either input, the monitor automatically detects and displays
that signal.
Priority setting
Performance
If signals from both inputs are present, the monitor gives preference to
Signal 1 in the following cases.
1
●
When the power of the monitor is turned ON.
When the signal input to Signal 1 is changed even if active input was
Signal 2 (Analog input only).
(SIGNAL 1 - DVI-I Input Connector)
●
If signals from both inputs are present, the monitor gives preference to
Signal 2 in the following cases.
2
●
When the power of the monitor is turned ON.
When the signal input to Signal 2 is changed even if active input was
Signal 1 (Analog input only).
(SIGNAL 2 - DVI-I Input Connector)
●
The monitor will not detect signals automatically in this mode. Select the
active input by pressing the Input Signal Selection Button on the monitor's
control panel.
Manual
●
When the "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are in
power saving mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
3. ScreenManager
3-1. How to use the ScreenManager
ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast
mode easily.
●
Main Menu and FineContrast Menu cannot be activated at the same time.
1. Entering the ScreenManager
Touch the Enter switch once to display the main menu of the ScreenManager.
2. Making Adjustments and Settings
1. Select the desired sub menu icon using the Directing switch and touch the Enter switch. The sub menu
appears.
2. Use the Directing switches to select the desired setting icon and touch the Enter switch. The setting
menu appears.
3. Use the Directing switches to make all required adjustments and touch the Enter switch to save the
settings.
3. Exiting the ScreenManager
1. To return to the main menu, select the <Return> icon or touch the Down switch twice, followed by the
Enter switch.
2. To exit the ScreenManager, select <Exit> icon or touch the Down switch twice, followed by the Enter
switch.
●
Double clicking the Enter switch at any time also exits the ScreenManager menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
FineContrast Menu
Directly touching the left or right switch allows you to select the best suited mode for screen display from
5 FineContrast modes; Custom, Movie, Picture, Text and sRGB. To exit the menu, touch the Enter
switch.
3-2. ScreenManager Adjustments and Settings
The following table shows all the ScreenManager's adjustment and setting menus.
"*" indicates adjustments of analog input only and "**" indicates digital input only.
Main menu
Sub menu
Reference
Clock
*
*
*
*
*
Phase
Position
Screen
Resolution
Range Adjustment
Smoothing
Signal Filter
Brightness
Temperature
Gamma
*
Saturation
Hue
Color
(Custom)
1
Gain
6 Colors
Reset
DVI DMPM
VESA DPMS
Screen Size
Border Intensity
Input Priority
Off Timer
**
*
Power
Manager
Set the monitor's beeper to on or off.
Beep
Menu Size
Change the size of the menu.
Adjust the menu position.
Others
Menu Position
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Settings
Menu Off Timer
Translucent
Set the menu displaying time.
Set the transparency of the background.
Make non-light for blue lighting when the
screen is displayed. (Power Indicator
Power Indicator
Reset
Return to the factory Default settings.
Review the ScreenManager's settings,
Information Information
model name, serial number and usage time.
English, German, French, Spanish, Italian,
Swedish and Japanese
Language
Select the ScreenManager's language.
*1
The adjustable functions on the <Color> menu depend on the selected FineContrast mode. The above
*2
Due to the inspection on the factory, the usage time may not "0 hour" at shipping.
3-3. FineContrast
This function allows you to select the best suited mode for screen display.
To select the Mode
Touching the Left or Right switch allows you to select the best suited mode for screen display from 5
FineContrast modes;; Custom, Movie, Picture, Text and sRGB. Color settings each mode can be adjusted
by using the <Color> menu of the ScreenManager.
●
When the main menu of ScreenManager is displayed on the screen, the FineContrast Menu cannot be
activated.
Exit
Press the Enter switch to exit the menu.
FineContrast Mode
Selectable FineContrast modes are as follows.
Download from Www.Somanuals.com. All Manuals Search And Download.
Custom To adjust the color settings according to your preference
Movie Animated images
Picture Photo or picture image
Text
Text on word processor or spreadsheet software
sRGB To display the screen images based on those original colors (ex. over the Internet)
Color Adjustment of the Mode Settings
<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the FineContrast menu. Select
the desired function icon with the Up/Down Directing switches and adjust with the Left/Right Directing
switches. (Setting(s) of <Temperature> and/or <Gamma> is defined as standard default in some modes.
Detailed Adjustments
The detailed color settings of each mode can be adjusted by using the <Color> menu of the
3-4. Useful Functions
Adjustment Lock
Use the "Adjustment Lock" function to prevent any accidental changes.
●
●
Adjustments and settings in the ScreenManager
Auto Adjustment Switch
Locked function
●
●
Selecting of the FineContrast mode by the Directing Switch / Adjustments
Unlocked function
●
Input signal selection switch
[How To lock]
1. Turn off the monitor's power by touching the power switch.
2. And then touch the power switch while touching the Auto Adjustment switch.
[How To unlock]
1. Turn off the monitor's power by touching the power switch.
2. And then touch the power switch while touching the Auto Adjustment switch once again.
Off Timer
The off timer function causes the monitor to automatically enter a power off state after a predetermined
amount of time has lapsed. This function was created to reduce Afterimage characteristics that are
particular to LCD monitors when the monitor screen is left on for a long period without use.
Download from Www.Somanuals.com. All Manuals Search And Download.
[Procedure]
1. Select <Off Timer> in the ScreenManager <Others> menu.
2. Select "Enable" and touch the Right and Left switches to adjust the "On Period" (1 to 23 hours).
[Off Timer System]
PC
Monitor
Operation
Power Indicator
On Period (1H - 23H)
Blue
Advance Notice
Last 15 min. in "On period"
Blue Flashing
Off
1
"On period" expired
Power Off
*1
Advance notice will be given 15 minutes before the monitor automatically enters the "Power Off"
mode. To delay entering the "Power Off" mode, touch the power switch during the advance notice
period. The monitor will continue to operate for an additional 90 minutes.
[Power Resumption Procedure]
Touch the power switch to return a normal screen.
●
The off timer function works while the PowerManager is active, but there is no advance notice before
the monitor's power is turned off.
Power Indicator Setting
Light off the power indicator. This function is available for the multiple panels settings.
[Procedure]
1. Select <Power Indicator> in the ScreenManager <Others> menu.
2. Select "Disable".
EIZO Logo Appearing Function
When turning on the monitor, the EIZO logo is displayed for a while. If you desire to display or undisplay
this logo, use this function. (Default is logo appearing.)
[To undisplay]
1. Turn off the monitor's power by touching the power switch.
2. touch the power switch while touching the Enter switch, and this logo is not displayed.
[To display]
1. Turn off the monitor's power by touching the power switch.
2. touch the power switch while touching the Enter switch, and this logo is not displayed again.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. ADJUSTMENT
4-1. Screen Adjustment
●
Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments.
The monitor displays the digital input image correctly based on its pre-setting data.
Analog Input
Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for
adjusting the screen to its proper position. There is only one correct position for each display mode. It is
also recommended to use the ScreenManager function when first installing the display or whenever
changing the system. For convenience, an easy set-up Program installed on the utility disk to assist in the
set-up procedure is provided.
Adjustment Procedure
1. Touch the Auto Adjustment Switch on the control panel.
The message appears and remains on the screen for 5 seconds. While the message is on the screen, touch
the Auto Adjustment switch again to automatically adjust the clock, phase, screen position and resolution.
If you do not wish to do adjust the screen, do not touch the Auto Adjustment switch again.
●
The Auto adjustment function is intended for use on the Macintosh and on AT-compatible PC
running Windows. It may not work properly in either of the following cases.
When running an AT-compatible PC on MS-DOS (Not windows). The background color for the
"wall paper" or "desktop" pattern is set to black.
If the appropriate screen cannot be made by using the Auto Adjustment switch, adjust the screen
through the following procedures. If the appropriate screen can be made, proceed to 4. Range
2. Run the "Screen Adjustment Program".
Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD
Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program
can be directly run from the menu screen of the CD-ROM.)
●
If the user's operating system has no utility disk (e.g. OS/2), we recommend setting the desktop
Download from Www.Somanuals.com. All Manuals Search And Download.
pattern to that as shown in the diagram on the following.
3. Adjust by using <Screen> menu in the ScreenManager.
(1) Vertical bars appear on the screen
→
Select the <Clock> and eliminate the vertical bars by using the Right and Left of the Directing
switches.
Do not continuously touch the Directing switches, as the adjustment value will change quickly and
make it difficult to locate the most suitable adjustment point.
If the horizontal flickering, blur or bars appear, proceed to <Phase> adjustment as follows.
(2) Horizontal flickering, blurring or bars appear on the screen.
→
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using the Right and Left
switches.
●
Horizontal bars may not completely disappear from the screen depending on the PC.
(3) The screen position is incorrect.
→
Use the <Position> adjustment.
The correct displayed position of the monitor is decided because the number and the position of the
Download from Www.Somanuals.com. All Manuals Search And Download.
pixels are fixed. The <Position> adjustment moves the image to the correct position.
Select <Position> and adjust the position by using the Up, Down, Right and Left switches.
If vertical bars of distortion appear after finishing the <Position> adjustment, return to <Clock>
adjustment and repeat the previously explained adjustment procedure.("Clock" → "Phase" →
"Position")
(4) Screen image is smaller or larger than the actual screen images.
→
Use the <Resolution> adjustment.
Adjustment is needed when the input signal resolution and the resolution now being displayed are
different.
Select <Resolution> and confirm if the resolution now being displayed is the same as the input
resolution. If it is not, adjust the vertical resolution using the Up and Down switches and adjust the
horizontal resolution using the Right and Left switches.
4. Adjust the output signal range (Dynamic Range) of the signal.
→
This controls the level of output signal range to display the whole color gradation (256 colors).
[Procedure]
Select the <Range Adjustment> in the ScreenManager and touch the Auto Adjustment switch on the
control panel to adjust the Range Adjustment.
The screen blanks for a moment and adjusts the color range to display the whole color gradation of the
current output signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
4-2. Displaying Lower Resolutions
The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the
<Others> menu enables to change the screen size.
1. Enlarge the screen size when displaying a low resolution.
→
Select the <Screen Size>.
Select the <Screen Size> in the others menu and select the screen size by using the up and down switches.
Menu
Function
Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical
resolution and the horizontal resolution are enlarged at different rates, some images may appear
distorted.
Full
Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical
Enlarged resolution and horizontal resolution are enlarged at same rates, some horizontal or vertical image may
disappear.
Normal Displays the picture at the actual Screen resolution.
Example: Displaying 1280 x 1024
2. Smooth the blurred texts of the enlarged screen.
→
Switch the <Smoothing> setting.
Select the suitable level from 1 - 5 (Soft - Sharp).
Select <Smoothing> in the <Screen> menu and adjust by using the right and left switches.
❍
<Smoothing> is disabled in the following cases.
❍
❍
❍
Screen is displayed in the 1920 x1200.
"Enlarged" is selected in <Screen Size> at 1600 x 1200 resolution..
"Normal" is selected in <Screen Size>.
3. Set the brightness of the black area surrounding the displayed image.
Download from Www.Somanuals.com. All Manuals Search And Download.
→
Set the <Border Intensity>.
In the <Enlarge> mode or <Full Screen> mode, the outer area (border) is usually black. Select <Border
Intensity> in the <Others> menu and adjust by using the right and left switches.
4-3. Color Adjustment
Color settings of each FineContrast mode can be adjusted and saved by using the <Color> menu of the
ScreenManager.
During color adjustments, the FineContrast mode cannot be changed. Select the mode in advance by
using the FineContrast Mode.
Adjustment Items
The adjustable items and displayed icons on the <Color> menu depend on the selected FineContrast mode.
" * ": Settable/Adjustable " - ": Fixed at the factory
FineContrast Modes
Functions
Icons
Custom Movie Picture Text sRGB
Brightness *
Temperature *
*
*
*
*
*
*
*
-
*
*
-
*
*
*
*
*
*
-
Gamma
Saturation
Hue
*
-
*
*
*
*
-
-
Gain
6 colors
Reset
*
*
*
-
-
-
-
-
-
-
-
-
*
*
*
Download from Www.Somanuals.com. All Manuals Search And Download.
●
●
●
Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow
the monitor to warm up for at least 20 minutes before making adjustments.)
Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the
default settings.
The values shown in percentages represent the current level within the specific adjustment. They are
available only as a reference tool. (To create a uniform white or black screen, the percentages for each
will probably not be the same.)
Adjustment Contents
Menu
Function Descriptions
To set the brightness of the screen
Adjustable range
0 ~ 100 %
Brightness
●
Directly touching the Up and Down switches also adjusts the brightness. Touch the Enter
switch to save and exit the settings after the adjustment.
4,000 ~ 10,000 K
To set the color temperature
in 500 K increments (including 9,300 K).
Default setting is off (normal white).
●
●
The values shown in the Kelvin are available only as a reference tool.
Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature
setting. (The color temperature's setting turns "OFF".)
●
Setting the <Gain> invalidates the <Temperature> adjustment. <Temperature> setting returns
to the default.
To set the gamma value
1.4 ~ 3.0
●
If setting the gamma value, the using the monitor in the digital signal input is recommended.
If using the monitor in the analog input signal, set the gamma value from 1.8 to 2.2.
-100 ~ 100
To change the saturation
Setting the minimum level (-100) turns the
image to the monochrome.
Saturation
●
The <Saturation> adjustment may cause undisplayable color tone.
To change the flesh color, etc.
-100 ~ 100
Hue
Download from Www.Somanuals.com. All Manuals Search And Download.
●
Using <Hue> adjustment may not obtain proper tone reproduction.
0 ~ 100%
By adjusting the red, green and blue color tones
for each mode, custom colors can be defined.
Display a white or gray background image and
adjust the <Gain>.
To change each color
(red, green and blue)
●
●
The values shown in the percentage are available only as a reference tool.
Setting the <Temperature> invalidates the <Gain> adjustment. <Gain> setting returns to the
defaul.
6 colors
Reset
Hue: -100 ~ 100
Saturation: -100 ~ 100
To adjust <Saturation> and <Hue> in each color
(Red, Yellow, Green, Cyan, Blue and Magenta)
To return the color settings of the selected mode
to the default settings
Select the <Reset>.
4-4. Power-save Setup
The <PowerManager> menu in the ScreenManager enables to set the power-save setup.
●
●
Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the
monitor from the power supply is recommended to save energy completely.
Even if the monitor is in a power saving mode, USB compliant devices function when they are
connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power
consumption of the monitor will change according to the connected devices even if the monitor is in a
power saving mode.
Analog Input
[Procedure]
1. Set the PC's power saving settings.
2. Select "VESA DPMS" from the <PowerManager> menu.
[Power Saving System]
PC
Monitor Power Indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
STAND-BY
Operation
Blue
Power saving SUSPEND
OFF
Power saving
Yellow
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen.
Digital Input
This monitor complies with the "DVI DMPM"
[Procedure]
1. Set the PC's power saving settings.
2. Select "DVI DMPM" from the <PowerManager> menu.
[Power Saving System]
PC
Operation
Power saving Power saving
Monitor Power Indicator
Operation
Blue
Yellow
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. MAKING USE OF USB (Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC
or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily
connected.
Required system environment
●
●
●
PC equipped with USB ports or another USB hub connected to the USB compliant PC
Windows 98/2000/Me/XP // Mac OS 8.5.1 or later
USB Cable (MD-C93, enclosed)
●
The USB hub function may not work properly depending on the PC or peripherals.
Please consult the manufacturer of each device about the USB support.
●
●
●
Using the USB Rev. 2.0 compatible PC or peripherals is recommended.
When the monitor is not on, the peripherals connected to the downstream ports will not operate.
Even if the monitor is in a power saving mode, the devices connected to the monitor's USB ports (both
the upstream and the downstream) will function.
●
The followings are procedures for the Windows 98/Me/2000/XP and Mac OS.
Connecting to the USB HUB
2. Connect the upstream port of the monitor to the downstream port of the USB
compliant PC or another hub by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
3. After setting up, the monitor's USB hub is available for connecting USB compliant
peripherals to the downstream ports of the monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Examples
ScreenManager Pro for LCD (for Windows)
For further details about the "ScreenManager Pro for LCD (for Windows)", refer to the EIZO LCD Utility
Disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. ATTACHING AN ARM
The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the
LCD monitor.
●
If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers
before selecting.
❍
❍
❍
Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant) or 200 mm x 100 mm
(VESA compliant)
Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as
a cable
TÜV/GS approved arm or stand
●
●
Please connect cables after attaching an arm stand.
This monitor does not support the portrait display.
Setup Procedure
1. Lay the LCD monitor down. Do not scratch the panel.
2. Remove the tilt stand by loosening the screws (4 pcs of M4 x 14).
3. Attach an arm stand to the LCD monitor securely.
●
Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)
●
Hole spacing on the arm mounting: 200 mm x 100 mm (VESA compliant)
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
7. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
●
●
●
●
No picture problems → See No.1 ~ No.2
Imaging problems → See No.3 ~ No.14
Other problems → See No.15 ~ No.19
USB problems → See No.20 ~ No.21
Problems
Points to check with Possible Solutions
●
Check that the power cord is correctly
connected. If the problem persists, turn off
the monitor power for a few minutes, then
turn it back on and try again.
1. No picture
●
Indicator status: Off
●
●
●
Try touching the Power switch.
●
Indicator status: Blue
Check the "Brightness" setting.
Switch the signal input by pressing the
Input Signal Selection switch on the front
control panel.
●
Indicator status: Yellow
●
These messages appear when the signal is not
inputted correctly, even if the monitor
functions properly.
●
When the image is displayed correctly
after a short time, there is no problem with
the monitor. (Some PCs do not output the
signal soon after powering on.)
2. Error messages shown below will remain on the
screen for 40 seconds.
●
●
Check that the PC is turned ON.
Check that the signal cable is properly
connected to the PC or graphics board.
Switch the signal input by touching the
●
control panel.
●
Whenever an error signal message appears, the signal
frequency will be displayed in red.
(Example)
●
Use the graphics board's utility software to
change the frequency setting. (Refer to the
manual of the graphics board.)
Download from Www.Somanuals.com. All Manuals Search And Download.
●
●
Adjust the image position using the
3. Display position is incorrect.
If the problem persists, use the graphics
board's utility software to change the
display position if available.
●
●
Adjust the resolution using the
4. Screen image is smaller or larger than the actual
screen images.
5. Vertical bars of distortion appear.
Decrease the vertical bars using the
6. The characters and images have several vertical
bars on their right side.
●
If using the monitor in the analog input
1.8 to 2.2.
7. Horizontal bars of distortion appear.
●
Decrease the horizontal bars using the
●
●
Adjust the blurred lines using
8. Letters and lines appear blurred.
9. Distortion appears like the figure below.
This happens when both composite (X-
OR) input signal and separate vertical
synchronizing signal are input. Please
select one of the two.
●
Adjust the <Brightness>.
(The backlight of the LCD monitor has a
fixed life span. When the screen becomes
dark or begins to flicker, please contact
your dealer.)
10. The screen is too bright or too dark.
11. Afterimages appear.
●
●
Do you use the screen saver or timer when
displaying the same image for extended
periods of time?
Afterimages are particular to LCD
monitors. Avoid displaying the same
image for extended periods of time.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
●
●
●
This is due to the characteristics of the
panel itself, and not the LCD product.
12. The screen has defective pixels (e.g. slightly
light or dark).
Leaving the screen white may solve the
problem.
13. Fingerprints remain on the screen.
14. The noise appears on the screen.
Change the mode in <Signal Filter> in the
<Screen> menu.
<Smoothing> is disabled in the following
cases.
●
●
Screen is displayed in the
1920 x1200.
"Enlarged" is selected in
<Screen Size> at 1600x
1200 resolution..
15. The <Smoothing> cannot be selected.
●
"Normal" is selected in
<Screen Size>.
●
●
Check that there is nothing left on the face
of Enter switch. Wipe the control panel,
and then touch the Enter switch again with
dry finger.
The adjustment lock is probably on. To
16. The Main menu of ScreenManager does not
operate.
unlock: turn the LCD monitor off. Then,
while touching the Auto Adjustment
switch, turn the power on.
●
●
●
17. The FineContrast mode does not operate.
Check that there is nothing left on the face
of Auto Adjustment switch. Wipe the
control panel, and then touch the Auto
Adjustment switch again with dry finger.
The adjustment lock is probably on. To
18. The Auto adjustment switch does not operate.
●
unlock: turn the LCD monitor off. Then,
while touching the Auto Adjustment
Switch, turn the power on.
19. Frequency does not change after installing
"Monitor information file" in the attached utility
disk on Windows 98/Me/2000/XP.
●
Use the graphics board's utility software to
change the input signal frequency.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
●
Check that the USB cable is correctly
connected.
Check the downstream ports by
connecting the peripherals to other
downstream ports. If the problem is solved
by doing this, contact an EIZO dealer.
(For details, refer to the manual of the
PC.)
20. PC is hung up. / The peripherals connected to
the downstream ports do not operate.
●
Try executing the following method.
●
Restarting the PC
●
Connecting the PC and peripherals
directly
If the problem is solved by doing this,
contact an EIZO dealer.
●
●
Check that the USB cable is correctly
connected.
Check that the PC and OS are USB
compliant. (For verification of USB
support, consult the manufacturer of each
system.)
21. USB function cannot be setup.
●
Check the PC's BIOS setting for USB.
(For details, refer to the manual of the PC.)
Download from Www.Somanuals.com. All Manuals Search And Download.
8. CLEANING
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
●
Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or
other strong solvents, as these may cause damage to the cabinet or LCD panel.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray
wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.)
LCD Panel
●
●
The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.
If necessary, stubborn stains can be removed by moistening part of a cloth with water to enhance
its cleaning power.
Download from Www.Somanuals.com. All Manuals Search And Download.
9. SPECIFICATIONS
61 cm (24.1 inch), TFT color LCD panel with Anti-Glare,
Viewing Angle: Horizontal: 178°, Vertical: 178° CR ≥ 10
LCD Panel
Dot Pitch
0.270 mm
Analog
Horizontal Scan Frequency
Digital
24 ~ 94 kHz (Automatic)
31 ~ 76 kHz
49 ~ 86 Hz (Automatic)
(1600 x 1200: 49 ~ 76 Hz / 1920 x 1200: 49 ~ 61 Hz)
Analog
Vertical Scan Frequency
Digital
59 ~ 61 Hz (VGA TEXT: 69 ~ 71 Hz)
1920 dots x 1200 lines
Resolution
Analog
Dot Clock (Max.)
202.5 MHz
Digital
162 MHz
Display Colors
Display Area
16.77 million colors (max)
518.4 mm (H) x 324.0 mm (V) (20.4" (H) x 12.8" (V))
100-120/200-240 VAC±10%, 50/60 Hz, 1.1 A/0.55A (with
USB)
Power Supply
Max.: 110 W (with USB)
Max (Normal): 100W (without USB)
Power Saving Mode: Less than 2 W (for single signal input
without USB)
Power Consumption
Input Connector
DVI-I x 2
a) Separate, TTL, Positive/Negative
b) Composite, TTL, Positive/Negative
0.7 Vp-p / 75 ohms, Positive
TMDS (Single Link)
Analog Input Signal (Sync)
Analog Input Signal (Video)
Input Signal (Digital)
Analog
Signal registration
45 (Factory preset: 30)
10 (Factory preset: 0)
Digital
Plug & Play
VESA DDC 2B
566 mm (W) x 358.7~ 480 mm (H) x 230 mm (D)
(22.3"(W) x 14.1" ~ 18.9" (H) x 9.1"(D))
with stand
Dimensions
566mm (W) x 396 mm (H) x 85 mm (D)
(22.3"(W) x 15.6"(H) x 3.35"(D))
without stand
with stand
10.2 kg (22.5 lbs.)
7.8 kg (17.2 lbs.)
Weight
without stand
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating: 0°C ~ 35°C (32°F ~ 95°F)
Storage: -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 30% to 80% R.H. Non-condensing
Temperature
USB
standard
Rev. 2.0 complied self-powered hub
Upstream port x 1
Downstream port x 2
USB port
Communication Speed
Power Supply
480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Downstream: 500 mA for each (max.)
1
NRTL/C-TÜV, FCC-B, TCO'03 , TCO'99 2 , EPA
100-120 VAC
200-240 VAC
ENERGY
STAR Program, TÜV/Rheinland Ergonomics Approved
Certifications and Standards
CE, CB, TÜV Rheinland/GS, TCO'03 , TCO'99 2 , EPA
ENERGY STAR Program, TÜV/Rheinland Ergonomics
Approved
*1
Applicable to white color version only.
Applicable to black color version only.
*2
Default settings
Brightness
Smoothing
100%
3
FineContrast Mode Custom
Analog input : VESA DPMS
Digital input: DVI DMPM
PowerManager
Screen Size
Input Priority
Off Timer
Menu Settings
Beep
Full
1
Disable
Menu Size: Normal, Menu Off Timer: 45 seconds
On
Language
English
Beeper settings
ScreenManager item selected.
Short beep
Long beep
ScreenManager parameter adjusted to minimum or maximum limit.
Input Signal Selection Button pressed.
Auto Adjustment Button pressed.
ScreenManager data-save executed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor not connected correctly.
PC turned off.
4 short beeps
Monitor received unsupported signal frequency.
Monitor is in the advance notice mode of the Off Timer.
The power will be off within fifteen minutes.
2 short beeps every 15 sec.
Dimensions
Pin Assignment
DVI-I Connector
Download from Www.Somanuals.com. All Manuals Search And Download.
Pin No.
Signal
Signal
TMDS Data1/3 Shield
NC
Pin No.
21
Signal
NC
1
2
3
4
TMDS Data2-
TMDS Data2+
11
12
22
TMDS Clock shield
TMDS Clock+
TMDS Clock-
TMDS Data2/4 Shield 13
NC
23
NC*
NC
14
15
+5V Power
24
Ground (return for +5V, Hsync and
Vsync)
5
C1
Analog Red
6
7
8
DDC Clock (SCL) 16
DDC Data (SDA) 17
Analog Vertical Sync 18
Hot Plug Detect
TMDS Data0-
TMDS Data0+
C2
C3
C4
Analog Green
Analog Blue
Analog Horizontal Sync
Analog Ground
(analog R, G, & B return)
9
TMDS Data1-
TMDS Data1+
19
20
TMDS Data0/5 Shield
NC
C5
10
(*NC: No Connection)
USB Port
Upstream
Downstream
Series B
Series A
Connector
Connector
No. Signal
Signal
1
2
3
VCC Cable power
- Data Serial Data
+ Data Serial Data
4 Ground Cable Ground
Download from Www.Somanuals.com. All Manuals Search And Download.
10. GLOSSARY
Clock
With the analog input signal display, the analog signal is converted to a digital signal by the LCD
circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number
clock pulse as the dot clock of the graphics system. When the clock pulse is not correctly set, some
vertical bars of distortion are displayed on the screen.
DVI
(Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with
the signal transition method "TMDS".
There are two kinds of DVI connectors. One is DVI-D connector for digital signal input only. The
other is DVI-I connector for both digital and analog signal inputs.
DVI DMPM
(DVI Digital Monitor Power Management)
The Power management system for the digital interface. The "Monitor ON" status (operation
mode) and the "Active Off" status (power-saving mode) are indispensable for the DVI-DMPM as
the monitor's power mode.
Gain Adjustment
Adjusts each color parameter for red, green and blue. The color of the LCD monitor is displayed
through the color filter of the LCD panel. Red, green and blue are the three primary colors. The
colors on the monitor are displayed by combining these three colors. The color tone can change by
adjusting the illumination amount passed through each color's filter.
Gamma
Generally, the relationship that the light intensity values of a monitor change nonlinearly to the
input signal level is called "Gamma Characteristic". On the monitor, low gamma values display the
whitish images and high gamma values display the high contrast images.
Phase
The phase adjustment decides the sampling timing point for converting the analog input signal to a
digital signal. Adjusting the phase after the clock adjustment will produce a clear screen.
Range Adjustment
The Range Adjustment controls the level of output signal range to display the whole color
gradation.
Resolution
Download from Www.Somanuals.com. All Manuals Search And Download.
The LCD panel consists of a fixed number of pixel elements which are illuminated to form the
screen image. This model display panel consists of 1920 horizontal pixels and 1200 vertical pixels.
At a resolution of 1920 x 1200, all pixels are displayed as a full screen.
sRGB
(Standard RGB)
"International Standard for Red, Green, and Blue color space"
A color space was defined with the aim of the color matching between applications and hardware
devices, such as monitors, scanners, printers and digital cameras. As a standard default space,
sRGB allows Internet users to closely match colors.
Temperature
Color Temperature is a method to measure the white color tone, generally indicated in degrees
Kelvin. At high temperatures the white tone appears somewhat blue, while at lower temperatures it
appears somewhat red. Computer monitors generally give best performance at high temperature
settings.
5,000 K: Slightly reddish white.
6,500 K: Warm-white tone, similar to white paper or daylight.
9,300 K: Slightly bluish white.
TMDS
(Transition Minimized Differential Signaling)
A signal transition method for the digital interface.
VESA DPMS
(Video Electronics Standards Association - Display Power Management Signaling)
The acronym VESA stands for "Video Electronics Standards Association", and DPMS stands for
"Display Power Management Signaling". DPMS is a communication standard that PCs and
graphics boards use to implement power savings on the monitor side.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX/ANHANG/ANNEXE
Preset Timing Chart for Analog input
Timing-Übersichten für Analog Eingang
Synchronisation des Signaux pour Analog numerique
Based on the signal diagram shown below 30 factory presets have been registered in the monitor's
microprocessor.
Der integrierte Mikroprozessor des Monitors unterstützt 30 werkseitige Standardeinstellungen (siehe
hierzu die nachfolgenden Diagramme).
30 signaux ont été enregistrés en usine dans le microprocesseur du moniteur, conformément au diagramme
de synchronisation ci-dessous.
Sync Polarity Frequencies
Dot Clock
Mode
MHz
H
V
H kHz V Hz
VGA
640 × 480 @ 60 Hz
25.2
28.3
30.2
57.3
100.0
126.2
31.5
31.5
36.0
36.0
Nega. Nega. 31.47 59.94
Nega. Posi. 31.47 70.09
Nega. Nega. 35.00 66.67
Nega. Nega. 49.73 74.55
Nega. Nega. 68.68 75.06
Posi. Posi. 74.76 74.76
Nega. Nega. 37.86 72.81
Nega. Nega. 37.50 75.00
Nega. Nega. 43.27 85.01
Posi. Posi. 35.16 56.25
VGA
720 × 400 @ 70 Hz
Macintosh
640 × 480 @ 67 Hz
Macintosh
832 × 624 @ 75 Hz
Macintosh
1152 × 870 @ 75 Hz
Macintosh
1280 × 960 @ 75 Hz
VESA
640 × 480 @ 72 Hz
VESA
640 × 480 @ 75 Hz
VESA
640 × 480 @ 85 Hz
VESA
800 × 600 @ 56 Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
VESA
800 × 600 @ 60 Hz
40.0
50.0
Posi. Posi. 37.88 60.32
Posi. Posi. 48.08 72.19
Posi. Posi. 46.88 75.00
Posi. Posi. 53.67 85.06
Nega. Nega. 48.36 60.00
Nega. Nega. 56.48 70.07
Posi. Posi. 60.02 75.03
Posi. Posi. 68.68 85.0
Posi. Posi. 67.50 75.00
Posi. Posi. 60.00 60.00
Posi. Posi. 63.98 60.02
Posi. Posi. 79.98 75.03
Posi. Posi. 91.15 85.03
Posi. Posi. 75.00 60.00
Posi. Posi. 81.30 65.00
Posi. Posi. 81.30 65.00
Posi. Posi. 93.75 75.00
Nega. Posi. 65.29 59.95
Nega. Posi. 74.56 59.89
VESA
800 × 600 @ 72 Hz
VESA
800 × 600 @ 75 Hz
49.5
VESA
800 × 600 @ 85 Hz
56.3
VESA
1024 × 768 @ 60 Hz
65.0
VESA
1024 × 768 @ 70 Hz
75.0
VESA
1024 × 768 @ 75 Hz
78.8
VESA
1024 × 768 @ 85 Hz
94.5
VESA
1152 × 864 @ 75 Hz
108.0
108.0
108.0
135.0
157.5
162.0
175.0
175.0
202.5
146.3
193.3
VESA
1280 × 960 @ 60 Hz
VESA
1280 × 1024 @ 60 Hz
VESA
1280 × 1024 @ 75 Hz
VESA
1280 × 1024 @ 85 Hz
VESA
1600 × 1200 @ 60 Hz
VESA
1600 × 1200 @ 65 Hz
VESA
1600 × 1200 @ 70 Hz
VESA
1600 × 1200 @ 75 Hz
VESA CVT
1680 × 1050 @ 60 Hz
VESA CVT
1920 × 1200 @ 60 Hz
VESA CVT RB
(Reduced Blanking)
1920 × 1200 @ 60 Hz
154.0
Posi. Nega. 74.04 59.96
Download from Www.Somanuals.com. All Manuals Search And Download.
[Applicable to white cabinet version only.]
Congratulations!
The display you have just purchased carries the TCO'03 Displays label. This means that your
display is designed, manufactured and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a high performance product,
designed with the user in focus that also minimizes the Impact on our natural environment.
Some of the features of the TCO'03 Display requirements:
Ergonomics
Good visual ergonomics and image quality in order to improve the working environment for the user and
●
to reduce sight and strain problems. Important parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Energy
●
●
●
Energy-saving mode after a certain time - beneficial both for the user and environment
Electrical safety
Emissions
Electromagnetic fields
Noise emissions
●
Ecology
●
The products must be prepared for recycling and the manufacturer must have a certified environmental
management system such as EMAS or ISO 14000
Restrictions on
chlorinated and brominated flame retardants and polymers
heavy metals such as cadmium, mercury and lead.
●
●
●
The requirements includes in this label have been developed by TCO Development in co-operation with scientists,
experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
Download from Www.Somanuals.com. All Manuals Search And Download.
[Applicable to black cabinet version only.]
Congratulations!
You have just purchased a TCO'99 approved and labelled product! Your choice has provided you
with a product developed for professional use. Your purchase has also contributed to reducing
the burden on the environment and also to the further development of environmentally adapted
electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of
goods and services to the environment. The main problem, as far as computers and other electronics equipment are
concerned, is that environmentally harmful substances are used both in the products and during their manufacture.
Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these
potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity
generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive
waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby
consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO'99 scheme which provides for international and environmental
labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish
Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and
magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be
prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to
in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and
magnetic fields, physical and visual ergonomics and good usability.
You will find a brief summary of the environmental requirements met by this product on the right. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet,
using the address: http://www.tcodevelopment.com/
Environmental Requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of
flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are
chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing
bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive
damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been
found in human blood and researchers fear that disturbances in foetus development may occur.
The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain
flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed
circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays.
Cadmium damages the nervous system and is toxic in high doses.
The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the
electrical or electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in
high doses.
The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that
mercury is not present in any of the electrical or electronics components associated with the labelled unit.
CFCs (freons)
Download from Www.Somanuals.com. All Manuals Search And Download.
The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture
and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break
down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of
ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system
and in higher doses, causes lead poisoning.
The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative.
Download from Www.Somanuals.com. All Manuals Search And Download.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach ISO13406-2 mit dem Videosignal, 1920 Punkte
≥ 1200 Zeilen, RGB analog, 0,7 Vp-p und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin
wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden
(schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom
Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des
Zubehörs sind in der zugehörenden Bedienungsanleitung angegeben.
b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht
höher als die Augenhöhe eines Benutzers in sitzender Position ist.
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe
der Bildschirmmitte über dem Boden zwischen 135 - 150 cm beträgt.
d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min.
nach hinten ≥ 5°).
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ± 180°). Der
maximale Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten
Position kippsicher sein.
"Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A)
oder weniger gemäss EN ISO 7779"
Download from Www.Somanuals.com. All Manuals Search And Download.
Recycle Auskunft
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem
Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der
Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu
erfahren, benutzen Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter
der Internet-Adresse: www.eizo.de.
Recycling Information for customers in Switzerland:
All recycling information is placed in the SWICO's website.
Recycling-Information für Kunden in der Schweiz:
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes SWICO.
Renseignements de recyclage pour les clients en Suisse:
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I'UNION DE BRAN CHE
SWICO.
Recycling Information for customers in USA:
All recycling information is placed in the EIZO Nanao Technologies, Inc's website.
Återvinnings information för kunder i Sverige:
All information om återvinning finns på Eizo Europe AB:s hemsida:
Download from Www.Somanuals.com. All Manuals Search And Download.
|
