EarthQuake Tiller 3365 User Manual

OPERATING INSTRUCTIONS &  
PARTS EXPLOSIONS  
FRONT TINE ROTOTILLERS  
Model 3365  
Model R3355H  
5.5 HP Honda  
Briggs & Stratton  
5.50 ft-lbs Gross Torque  
Model 3365B  
Briggs & Stratton  
3365PSCE  
Briggs & Stratton  
8.5 ft-lbs Gross Torque  
Model 3365PS  
Briggs & Stratton  
6.50 ft-lbs Gross Torque  
6.50 ft-lbs Gross Torque  
Model 3365CE  
Briggs & Stratton  
6.50 ft-lbs Gross Torque  
Model 3365KPS  
Kohler  
7.25 ft-lbs Gross Torque  
Model 3365K  
Kohler  
7.25 ft-lbs Gross Torque Vert.  
OMFT  
Rev. 04/26/10  
© 2010 Ardisam, Inc.  
All Rights Reserved.  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
INTROdUCTION  
ThANkYOU . . .  
for purchasing an Earthquake® forward rotating front tine rototiller  
from Ardisam, Inc. We have worked to ensure that this front tine  
rototiller meets high standards for usability and durability. With  
proper care, your rototiller will provide many years of service.  
Please take the time to read this manual carefully to learn how to  
correctly operate and maintain your rototiller. This manual should  
be considered a permanent part of your rototiller. Due to continuous  
efforts to perfect our product, certain procedures and specifications  
are subject to change without notice. Congratulations on your  
investment in quality.  
CONTENTS  
Warranty Registration...................................................................... 3  
Safety .............................................................................................. 4  
Unpacking and Assembly................................................................ 7  
Features .......................................................................................... 8  
Controls ........................................................................................... 9  
Operation....................................................................................... 10  
Maintenance & Storage................................................................. 12  
Troubleshooting & Repair .............................................................. 16  
Parts Explosions............................................................................ 17  
REGISTRATION  
Record your model number and serial number in the space provided for  
easy reference. Fill out and mail the registration card located in your  
parts packet. Warranty is valid only if your completed registration card  
is received by Ardisam, Inc., within two weeks of the purchase date.  
Model Number  
Serial Number  
Engine Serial Number  
Date of Purchase  
Place of Purchase  
800-ꢀ45-6007  
Page ꢀ  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
SAFETY  
!
dANGER  
OWNER’S RESPONSIBILITY  
Accurate assembly and safe and effective use of the rototiller is the  
owner’s responsibility.  
dANGER INdICATES A SERIOUS INjURY OR FA-  
TALITY WILL RESULT IF ThE SAFETY INSTRUC-  
TIONS ThAT FOLLOW ThIS SIGNAL WORd ARE  
NOT OBEYEd.  
Read and follow all safety instructions.  
Carefully follow all assembly instructions.  
Maintain the tiller according to directions and schedule included  
in this Earthquake operator’s manual.  
WARNING  
!
WARNING INdICATES A SERIOUS INjURY OR FA-  
TALITY COULd RESULT IF ThE SAFETY INSTRUC-  
TIONS ThAT FOLLOW ThIS SIGNAL WORd ARE  
NOT OBEYEd.  
Ensure that anyone who uses the tiller is familiar with all  
controls and safety precautions.  
SPECIAL MESSAGES  
Your manual contains special messages to bring attention to potential  
safety concerns, machine damage as well as helpful operating and  
servicing information. Please read all the information carefully to  
avoid injury and machine damage.  
!
CAUTION  
CAUTION INdICATES YOU CAN OR YOUR EQUIP-  
MENT CAN BE hURT IF ThE SAFETY INSTRUC-  
TIONS ThAT FOLLOW ThIS SIGNAL WORd ARE  
NOT OBEYEd.  
NOTE: General information is given throughout the manual  
that may help the operator in the operation or service of the  
machine.  
IMPORTANT SAFETY PRECAUTIONS  
Please read this section carefully. Operate the tiller according to the  
safety instructions and recommendations outlined here and inserted  
throughout the text. Anyone who uses this tiller must read the instruc-  
tions and be familiar with the controls. Your tiller is equipped with a  
safety device that enables you to stop the wheels and tines quickly  
in an emergency. Learn how the drive safety control lever operates  
and how to control the tiller at all times.  
IMPORTANT  
IMPORTANT INdICATES hELPFUL INFORMATION  
FOR PROPER ASSEMBLY, OPERATION, OR  
MAINTENANCE OFYOUR EQUIPMENT.  
This symbol points out important safety instructions  
which if not followed could endanger your personal  
safety. Read and follow all instructions in this manual  
before attempting to operate this equipment.  
!
WARNING  
YOUMUSTREAd,UNdERSTANdANdCOMPLYWITh  
ALL SAFETY ANd OPERATING INSTRUCTIONS IN  
ThIS MANUAL BEFORE ATTEMPTING TO SET UP  
ANd OPERATEYOUR ROTOTILLER.  
Do not allow children to operate this rototiller. Keep small children away  
from the area being tilled. Do not allow adults to operate the tiller without  
proper instruction.  
FAILURE TO COMPLY WITh ALL SAFETY ANd  
OPERATING INSTRUCTIONS CAN RESULT IN LOSS  
OF MAChINE CONTROL, SERIOUS PERSONAL  
INjURY TOYOU ANd/OR BYSTANdERS, ANd RISk  
OF EQUIPMENT ANd PROPERTY dAMAGE. ThE  
TRIANGLE IN ThE TExT SIGNIFIES IMPORTANT  
CAUTIONS OR WARNINGS WhICh MUST BE  
FOLLOWEd.  
PREPARATION  
Dress appropriately when operating the tiller. Always wear sturdy  
footwear.Never wear sandals, sneakers or open shoes, and never  
operate the tiller with bare feet. Do not wear loose clothing that  
might get caught in moving parts.  
CALIFORNIA PROPOSITION 65 WARNING  
Carefully inspect the area to be tilled and remove all foreign objects.  
Do not till above underground water lines, gas lines, electric cables,  
or pipes.Do not operate the tiller in soil with large rocks and foreign  
objects which can damage the equipment.  
ENGINE ExhAUST FROM ThIS PROdUCT  
CONTAINS ChEMICALS kNOWN TO ThE STATE  
OF CALIFORNIA TO CAUSE CANCER, BIRTh  
dEFECTS, OR OThER REPROdUCTIvE hARM.  
Disengage all clutches and leave all control levers in the neutral  
position before starting the engine.  
Handle fuel with care; it is highly flammable.  
a. Use an approved fuel container.  
b. Never add fuel to a running engine or hot engine.  
Page 4  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
c. Fill fuel tank outdoors with extreme care. Never fill fuel  
tank indoors.  
IMPORTANT  
d. Replace gasoline cap securely and clean up spilled fuel  
before restarting.  
ThE RIGhT ANd LEFT SIdES OFYOUR  
ROTOTILLERAREdETERMINEdFROM  
ThE OPERATING POSITION AS YOU  
FACE ThE dIRECTION OF FORWARd  
TRAvEL.  
Never attempt to make any adjustments while the engine is  
running.  
ENGINE IS ShIPPEd FROM FACTORY  
WIThOUT OIL.YOU MUST Add ENGINE  
OIL BEFORE STARTING ENGINE.  
OPERATION  
• Do not operate the tiller under the influence of alcohol or  
drugs.  
• Never operate the tiller without guards, covers, and hoods in  
place.  
MAINTENANCE ANd STORAGE  
• Keep machine, attachments and accessories in safe working  
condition.  
• Keep hands, feet, and clothing away from rotating parts.Keep  
clear of tiller tines at all times.  
• Tines rotate when tiller is engaged;tines rotate when the drive  
safety control lever is pulled down. Releasing the drive safety  
control lever to neutral stops the tines.  
• Check shear bolts, engine mounting bolts and other bolts at  
frequent intervals for proper tightness to be sure the equipment  
is in safe working condition.  
• Use extreme caution when operating on or crossing gravel  
drives, walks, or roads. Stay alert for hidden hazards or  
traffic.  
To prevent accidental starting, always disconnect and secure  
the spark plug wire from the spark plug before performing tiller  
maintenance.  
• After striking a foreign object, stop the engine, remove the  
wire from the spark plug, thoroughly inspect the tiller for  
any damage, and repair the damage before restarting and  
operating the tiller.  
• Never run the engine indoors. Exhaust fumes are deadly.  
• Always allow muffler to cool before filling the fuel tank.  
• Never store equipment with gasoline in the tank inside a closed  
building where fumes may reach an open flame or spark.Allow  
the engine to cool before storing in any building.  
IF vEGETATION CLOGS ThE TINES, STOP ThE ENGINE  
ANd dISCONNECT ThE SPARk PLUG WIRE before  
removing vegetation by hand.  
• Always refer to the operator’s guide instructions for important  
details if the tiller is to be stored for an extended period.  
• Engine muffler will be hot from operation. Do not touch it with  
bare skin or a severe burn may result.  
• If the unit should start to vibrate abnormally, stop the engine  
and check immediately for the cause.Vibration is generally a  
warning of trouble.  
AddITIONAL SAFETY INFORMATION (CE UNITS ONLY)  
This rototiller unit has been tested and verified to be within the  
acceptable level of noise range for CE compliance at 80dB  
Lpa.  
• Do not run the engine indoors; exhaust fumes are deadly.  
• Do not overload the machine capacity by attempting to till too  
deep at too fast of a rate.  
This rototiller unit has been tested and verified to be within the  
acceptable level of vibration for CE compliance at 6.2 m/s2.  
• Never allow bystanders near the unit.  
For the health and safety of the consumer it is recommended  
that this product be used for no more than 2 consecutive hours  
in any given 12 hour period.  
• Never operate the tiller without good visibility or light.  
• Be careful when tilling in hard ground.The tines may catch in  
the ground and propel the tiller forward. If this occurs, let go  
of the handlebars and do not restrain the machine.  
Take all possible precautions when leaving the machine  
unattended. Disengage all control levers, stop the engine,  
wait for all moving parts to stop, and make certain guards  
and shields are in place.  
• When leaving the operating position for any reason:  
- shut off the engine.  
- wait for all moving parts to stop.  
800-ꢀ45-6007  
Page 5  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
SAFETY dECALS  
This rototiller unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry  
leader in outdoor power equipment manufacturing.  
Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate  
this equipment safely and effectively, we have placed several safety labels on the tiller to remind you of this important information  
while you are operating the unit.  
These important safety labels are illustrated below, and are shown here to help familiarize you with the location and content of the  
safety messages you will see as you perform normal tilling operations. Please review these labels now. If you have any questions  
regarding their meaning or how to comply with these instructions, reread the complete safety instruction text on the preceding pages,  
or contact your local dealer.  
Should any of the safety labels become unreadable because of being worn, faded, or otherwise damaged during the use of your tiller,  
please use the part number information provided to order a replacement label from your local authorized dealer.  
The safety labels are easily applied and will act as a constant visual reminder to you and others who may use the equipment. Follow  
the safety instructions necessary for safe, effective operation of your rototiller.  
Part No. LBL821B  
hOOd WARNING  
hood decal  
ARDISAM, INC.  
1160 8th Avenue  
|
Cumberland, WI 54829  
|
USA  
Serial No.  
LBLINFO3365CE  
Part No. LBLꢀ100C  
TINES dANGER/OPERATION  
hood decal  
Earthquake 3365CE  
Year: 2010 Mass: 47.63 kg  
Max. Operating Speed: 3600 rpm  
Nominal Power Rating: 5.06 kW  
Part No. LBLINFOꢀꢀ65CE  
Name Plate  
Tine Shield decal  
Part No. LBLꢀ100h  
Part No.  
WARNING  
LBLCENOISE80  
decibel Level decal  
Pivot Mount decal  
Part No. LBLꢀ100d  
CLUTCh ENGAGE  
handlebar decal  
Part No. LBL516C  
WARNING  
Belt Cover decal  
Page 6  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
UNPACkING ANd ASSEMBLY  
UNPACk TILLER & ASSEMBLE  
IMPORTANT  
ThE RIGhT ANd LEFT SIdES OFYOUR  
ROTOTILLERAREdETERMINEdFROM  
ThE OPERATING POSITION AS YOU  
FACE ThE dIRECTION OF FORWARd  
TRAvEL.  
1. Open top of carton and remove handlebar assembly.  
2. Find parts packet. Parts packet for 3365/3365B/3365K/3365CE  
contains:  
ENGINE IS ShIPPEd FROM FACTORY  
WIThOUT OIL.YOU MUST Add ENGINE  
OIL BEFORE STARTING ENGINE.  
6- 5/16-18 x 1-3/4” bolts  
6- 5/16” spring lockwashers  
2- hand knobs  
4- locknuts  
2- 1/2” push nuts  
1- detent pin  
!
CAUTION  
Parts packet for 3365PS/3365KPS/R3365H/3365PSCE con-  
tains:  
dO NOT TRY TO LIFT ThE ROTOTILLER FROM ThE  
CARTON.  
2- 3/8-16 x 1” bolts  
2- 3/8-16 biway locknuts  
2- 5/16-18 x 1” bolts  
4- 5/16-18 x 1-3/4” bolts  
6- 5/16” spring lockwashers  
2- hand knobs  
4- 5/16” locknuts  
2- 1/2” push nuts  
1- detent pin  
3. Cut open end of carton and remove machine:  
a. Install wheels on each end of axle; tap on push nuts with a  
hammer.  
NARROW TINE WIdTh  
b. Assemble tines to unit, inside tines first. Sharp edge of tine  
will be away from operator at top, or face down at front of  
machine.  
c. Outside tines have two positions- wide 21” and narrow 16”.  
For narrow width, assemble with short side of tine holder pipe  
towards center of machine.  
d. For wide width, move the left tine to the right side and right  
tine to the left side. Assemble with the long half of tine pipe  
towards machine.  
e. Slide the top handle of handlebar over the lower loop. Put  
5/16-18 x 1-3/4” bolts through both holes from inside out;  
put on 5/16” spring lockwashers and tighten with hand  
knobs. Models 3365PS, 3365KPS, and R3365H will use  
3/8-16 x 1” bolts with nuts and 5/16-18 x 1”  
bolts with hand knobs. See parts explosion on page 19.  
f. Check upper and lower jam nuts for tightness. See page 9,  
Belt Tension Adjustment.  
WIdE TINE WIdTh  
upper  
handlebar  
lower  
handlebar  
loop  
g. Add and check engine oil.  
INSTALL dEPTh REGULATOR LEvER  
1. Install the depth regulator lever through hole in bracket from the  
bottom up with curve to rear of unit and secure with detent pin.  
hand knob  
FILL ENGINE CRANkCASE  
depth  
regulator  
lever  
1. Addoilaccordingtoenginemanual.donotoverfill. Useaclean, high  
qualitydetergentoil.ContainermustbemarkedA.P.I.ServiceSF-SJ.  
Use no special additives with recommended oils.do not mix oil with  
gasoline. Oil level must be full. Check the oil level by removing oil fill  
plug. Oil level should be up to the bottom of the fill plug opening.  
detent pin  
2. Always check oil level before starting engine.Refer to engine manual  
for capacity and type of oil to use.  
800-ꢀ45-6007  
Page 7  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
FEATURES (ꢀꢀ65/ꢀꢀ65B/ꢀꢀ65CE/ꢀꢀ65k)  
The advantage of the EARThQUAkE® BAdGER™ gear drive rototiller over other front tine tillers is the exclusive  
unfolding and flexible drag bar. This gives the Earthquake® Badger™ gear drive tiller its stability and versatility.  
For easy transport, fold the wheels under the engine. During operation, the wheels unfold back and the drag bar folds  
down. The long length between the tines and the drag bar make this the most comfortable front tine tiller on the mar-  
ket.  
drive safety control lever  
forward cable  
hand knob  
front belt cover  
3-way adjustable tine widths  
Transport Position  
Operating Position  
Page 8  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
CONTROLS  
dRIvE SAFETY CONTROL LEvER  
!
CAUTION  
ThIS INFORMATION IS PROvIdEd hERE ONLY TO  
INTROdUCE ThE CONTROLS. dO NOT START ThE  
ENGINE ATThISTIME. STARTING ANd OPERATING  
INSTRUCTIONS ARE GIvEN ON PAGE 10. PLEASE  
REAd ThIS SECTION ANd ALL OPERATING ANd  
SAFETY INSTRUCTIONS BEFORE STARTINGYOUR  
TILLER.  
Engages tines into forward; releasing returns machine to neutral.  
Pulling down on the drive safety control lever engages the tines.  
Releasing the drive safety control lever disengages the tines to a  
neutral position.  
BELT TENSION AdjUSTMENT  
Proper belt tension is critical to good performance. After 30 minutes  
of operation, all cables may have to be adjusted due to initial stretch.  
Thereafter, check tension after every two hours of operation.  
AS A SAFETY PRECAUTION,ThE dRIvE SAFETY  
CONTROL LEvER WILL NOT LOCk IN ThE  
FORWARd POSITION.  
To increase belt tension:  
TO STOP ThE WhEELS ANd TINES AT ANY  
TIME, RELEASE ThE dRIvE SAFETY CONTROL  
LEvER.  
1. Loosen upper jam nut. Turn nut up cable in 1/8” increments.  
2. Tighten lower jam nut.  
3. Check adjustment.  
!
This procedure can be repeated until conduit adjustment bolts have  
no more adjustment left. If no more adjustment can be made, belt  
may have to be replaced.  
WARNING  
ENGINE ShOULd BE OFF BEFORE AdjUSTING  
ANY CONTROLS.  
dO NOT AdjUST TILLING dEPTh UNLESS dRIvE  
SAFETY CONTROL LEvER IS RELEASEd TO ThE  
NEUTRAL POSITION.  
dEPTh REGULATOR LEvER  
Tilling depth is controlled by the height of the depth regulator lever.  
To adjust tilling depth:  
1. Remove detent pin.  
2. Raise the depth regulator lever to position tines at chosen tilling  
depth.  
3. Align hole in depth regulator lever with hole in depth regulator  
bracket and replace detent pin.  
drive safety control lever disengaged  
drive safety control lever disengaged  
1/4” stretch  
1/4” stretch  
upper jam nut  
lower jam nut  
upper jam nut  
lower jam nut  
forward cable  
forward cable  
Model ꢀꢀ65PS/ꢀꢀ65kPS/Rꢀꢀ65h/ꢀꢀ65PSCE  
handlebar  
Model ꢀꢀ65/ꢀꢀ65B/ꢀꢀ65k/ꢀꢀ65CE handlebar  
800-ꢀ45-6007  
Page ꢁ  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
OPERATION  
PRE-START INSPECTION  
1. Make sure all safety guards are in place and all nuts and bolts  
are secure.  
IMPORTANT  
ENGINE IS ShIPPEd FROM FACTORYWIThOUT OIL.  
YOU MUST Add ENGINE OIL BEFORE STARTING  
ENGINE.  
PRACTICE OPERATING ThE CONTROLS ANd  
TILLER WITh TINES OUT OF GROUNd BEFORE  
BEGINNING TO TILL. IT IS IMPORTANT ThAT YOU  
kNOW hOWTO USEThETILLER PROPERLY, kEEP  
CONTROL AT ALL TIMES, STOP ThE TINES ANd  
WhEELS FROM TURNING, ANd STOP ThE ENGINE  
IF NECESSARY. IF YOU dO NOT kNOW hOW TO  
dO ThESE ThINGS, REAd ThE CONTROLS ANd  
SAFETY SECTIONS BEFORE PROCEEdING.  
2. Check oil level in engine crankcase. See your engine manual for  
procedure and specifications.  
3. Inspect air cleaner for cleanliness. See your engine manual for  
procedure.  
4. Check the fuel supply. Fill the fuel tank no closer than one inch  
from top of tank to provide space for expansion. See your engine  
manual for fuel recommendations.  
5. Be sure spark plug wire is attached and spark plug is  
tightened securely.  
6. Check position of wheels.  
!
CAUTION  
7. Check depth regulator lever position.  
PLEASE dO NOT START YOUR TILLER UNTIL YOU  
hAvE REAdThE MANUALThAT CAMEWIThYOUR  
ENGINE ANd ThE SECTIONS IN ThIS MANUAL  
TITLEd “CONTROLS ANd SAFETY.” ONCE YOU  
hAvE REAd ThESE, FOLLOW ThE APPROPRIATE  
STEPSTO STARTYOURTILLER.ALWAYS PERFORM  
ThIS PRE-START ChECkLIST BEFORE STARTING  
ThE ENGINE.  
8. Examine underneath and around engine for signs of oil or fuel  
leaks.  
9. Inspect fuel hoses for tightness and fuel seepage.  
10.Look for signs of engine damage.  
11.Remove excessive debris from muffler area and recoil starter.  
12.Turn fuel shutoff valve to the ON position if engine is equipped with  
one. It’s located between tank and carburetor.  
!
WARNING  
START-UP  
GASOLINE IS hIGhLY FLAMMABLE ANd MUST  
BE hANdLEd WITh CARE. NEvER FILL ThE TANk  
WhENThE ENGINE IS hOT OR RUNNING. ALWAYS  
MOvE OUTdOORS TO FILL ThE TANk.  
For models ꢀꢀ65, ꢀꢀ65B, ꢀꢀ65CE, ꢀꢀ65k, ꢀꢀ65kPS,  
and ꢀꢀ65PS only.  
The controls required to start and run the rototiller are located on the  
engine and are marked CHOKE and THROTTLE.  
TEMPERATURE OF MUFFLER ANd NEARBY AREAS  
MAY ExCEEd 150° F. AvOId ThESE AREAS.  
A more detailed description of engine operation and all related  
precautions and procedures can be found in the engine manufacturer’s  
manual that accompanies each tiller.  
dO NOT MOvE ChOkE CONTROL TO ChOkE TO  
STOP ENGINE. BACkFIRE OR ENGINE dAMAGE  
MAY OCCUR.  
TO STOPThE ENGINE AT ANYTIME, MOvEThROT-  
TLE CONTROL TO ThE OFF POSITION. TO STOP  
TINES AT ANY TIME, RELEASE dRIvE SAFETY  
CONTROL LEvER TO ThE NEUTRAL POSITION.  
COLd STARTS  
1. Move choke lever to FULL choke position.  
2. Move throttle lever to START.  
ALWAYS RELEASE dRIvE SAFETY CONTROL  
LEvER TO ThE NEUTRAL POSITION BEFORE  
AdjUSTING ThE dEPTh OF ThE REGULATOR  
LEvER.  
3. Pull starting rope out slowly one time and allow to return  
normally.  
4. Pull starting rope out rapidly and allow rope to return normally.  
5. When engine starts, gradually move choke lever to NO CHOKE  
position and increase throttle speed.  
RESTARTING A WARM ENGINE  
Restarting an engine that is already warm from previous running does  
not normally require the use of the choke.  
1. Move throttle lever to START position.  
2. Pull starting rope out rapidly until engine starts. Allow rope to  
return normally. Repeat until engine starts.  
3. Adjust throttle speed to HIgH for best tiller action.  
Page 10  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
For models Rꢀꢀ65h and ꢀꢀ65PSCE only.  
The controls required to start and run the rototiller are located on  
the handle.  
!
WARNING  
ExTREME CAUTION MUST BE TAkEN IN SELECT-  
INGTILLING dEPTh. IFYOU ATTEMPTTOTILLTOO  
dEEPLY FOR SOIL CONdITIONS—ThAT IS, WITh  
ThE dRAG STAkE IN TOO hIGh OF A POSITION—  
LOSS OF CONTROL COULd RESULT.  
A more detailed description of engine operation and all related  
precautions and procedures can be found in the engine manufacturer’s  
manual that accompanies each tiller.  
COLd STARTS  
IF REMOvING MATERIAL FROM ThE TINES BY  
hANd, STOP ThE ENGINE ANd REMOvE SPARk  
PLUG WIRE FIRST.  
1. Move the throttle control to the FAST position.  
2. Pull starting rope out slowly one time and allow to return  
normally.  
3. Pull starting rope out rapidly and allow rope to return normally.  
4. Operate engine in the FAST position.  
!
dANGER  
ENGINE ANd SURROUNdING PARTS BECOME  
ExTREMELY hOT dURING NORMAL USE ANdWILL  
CAUSE SERIOUS BURN INjURIES IF TOUChEd  
BEFORE ThE ENGINE hAS COOLEd.  
RESTARTING A WARM ENGINE  
Restarting an engine that is already warm from previous running does  
not normally require use of the choke.  
ALLOW ENGINE TO COOL COMPLETELY BEFORE  
TOUChING ThESE hOT SURFACES.  
1. Move throttle lever to FAST position.  
2. Pull starting rope out rapidly until engine starts.Allow rope to return  
normally. Repeat until engine starts.  
ALWAYS kEEP hANdS ANd FEET CLEAR OF  
ROTATING MAChINE PARTS.  
3. Adjust throttle speed to FAST for best tiller action.  
OPERATING SPEEd  
For normal tilling, set the throttle lever to FAST.  
ShUTTING dOWN  
For models ꢀꢀ65, ꢀꢀ65B, ꢀꢀ65k, ꢀꢀ65kPS, ꢀꢀ65CE  
and ꢀꢀ65PS only.  
To stop the engine at any time, move the throttle control to the OFF  
position. To stop wheels and tines at any time, release the drive safety  
control to the NEUTRAL position.  
For models Rꢀꢀ65h and ꢀꢀ65PSCE only.  
To shut the engine off, push the throttle control lever all the way forward.  
Turn the fuel shutoff valve to the CLOSED position.  
TILLING  
1. Adjust the depth regulator lever to desired tilling depth.  
NOTE: Raise depth regulator lever up one hole at a time,  
testing tiller operation after each raise. Raising depth regulator  
lever too high can result in loss of control of tiller!  
2. Move the throttle control to FAST.  
3. Place the tiller in motion by pushing down on the drive safety control  
lever; this will engage the tines.  
800-ꢀ45-6007  
Page 11  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
MAINTENANCE ANd STORAGE  
MAINTENANCE SChEdULE  
Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you  
with years of reliable operation.  
Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.  
Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.  
Before  
Each Use  
50 hours or  
Every Season  
Maintenance Operation  
Page  
Check belt tension  
Change forward belt  
Engine maintenance  
Check oil level/change oil  
Clean tine axle shaft  
Lubrication  
13  
13  
14  
14  
14  
14  
-
X
X
X
2
X
X
X
X
1
Check throttle control adjustment  
EM = See engine manual  
1 Adjust throttle control after first three hours of operation or if engine is hard to start or run-on occurs.  
2 Change oil after the first five to eight hours of use, then after every 50 hours or every season. Change oil every 25  
hours when operating under heavy load or in high temperatures.  
SERvICING ThE ROTOTILLER  
The following information will help you make the necessary checks  
and perform the procedures required to follow the normal care  
recommendations made for your rototiller unit.  
!
WARNING  
To prevent accidental starting:  
If you prefer, your local authorized dealer can make these checks and  
perform the required procedures for you.  
Engine must be turned off and cool, and spark  
plug wire must be removed and secured from  
spark plug before checking and adjusting engine  
or equipment.  
Page 12  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
ChECk BELT TENSION  
!
WARNING  
Belt tension may decrease over time. It must be adjusted within  
the first half hour of operation and checked after every two hours of  
operation. Proper adjustment will assure long belt life. Too much or  
too little belt tension will cause premature belt failure. To check and  
adjust the forward belt tension:  
ChECk FORWARd BELT TENSION REGULARLY.  
TOO MUCh OR TOO LITTLE TENSION WILL CAUSE  
PREMATURE BELT FAILURE.  
1. Turn off engine. Engine must be cool.  
2. Remove spark plug wire from spark plug and secure.  
3. With drive safety control lever in the NEUTRAL position, measure  
length of spring when in its relaxed state.  
remove belt  
from front  
4. Pull down on drive safety control lever and measure length of  
spring when compressed. Ideal length would be 1/4” shorter.  
ChANGE FORWARd BELT  
1. Turn off engine. Engine must be cool.  
2. Remove spark plug wire from spark plug and secure.  
3. Remove front belt cover.  
• Remove the belt from the engine pulley:  
- gently pull the engine recoil rope to rotate the pulley.  
- With the pulley turning, force the belt out of the V-groove.  
- Slide the belt free of the engine pulley.  
- Pull the belt down and out of the way.  
- Push the belt forward and out front of machine.  
• Install new belt:  
BELT REPLACEMENT PART #:  
3370 (forward)  
- Place belt in transmission pulley groove.  
- gently pull the engine recoil rope to rotate the pulley while  
forcing the belt into the V-groove.  
4. Replace front belt cover.  
5. Attach spark plug wire.  
800-ꢀ45-6007  
Page 1ꢀ  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
ENGINE MAINTENANCE  
IMPORTANT  
Refer to the engine manual included in your parts packet for  
information on engine maintenance. Your engine manual provides  
detailed information and a maintenance schedule for performing the  
following tasks:  
ENGINEISShIPPEdFROMFACTORYWIThOUTOIL.  
YOU MUST Add ENGINE OIL BEFORE STARTING  
ENGINE.  
1. Check oil level before each use or after every eight hours of  
operation.  
ENGINE CAN OvERhEAT ANd BECOME dAMAGEd  
IF dEBRIS BLOCkS ThE COOLING SYSTEM OR  
ROTATING SCREEN.  
2. Change oil after first five to eight hours of operation. Change oil  
while engine is warm. Refill with new oil of recommended grade.  
NEvER RUN ENGINE WIThOUT COMPLETE AIR  
CLEANER INSTALLEd ON ENGINE.  
4. Check spark plug yearly or every 100 hours of operation.  
5. Service air cleaner.  
6. Keep engine and parts clean.  
!
CAUTION  
dO NOT OPERATE TILLER BEFORE REAdING  
ThE ENGINE MANUAL PROvIdEd IN ThE PARTS  
PACkET.  
7. Check engine and equipment often for loose nuts and bolts; keep  
these items tightened.  
ChECk OR FILL ENGINE CRANkCASE  
1. Add oil according to engine manual. do not overfill. Use a clean,  
high-quality detergent oil.Container must be marked A.P.I.Service  
SF - SJ. Use no special additives with recommended oils. do not  
mix oil with gasoline. Oil level must be full. Check the oil level  
by removing oil fill plug. Oil level should be up to the bottom of the  
fill plug opening on most engines.  
!
WARNING  
TEMPERATURE OF MUFFLER ANd NEARBY AREAS  
MAY ExCEEd 150° F. AvOIdThESE AREAS.  
2. Always check oil level before starting engine. Refer to engine  
manual for capacity and type of oil to use.  
CLEAN TINE AxLE ShAFT  
1. Turn off engine. Engine must be cool.  
2. Remove spark plug wire and secure from spark plug.  
3. Remove all vegetation, string, wire, and other material that may  
have accumulated on the axle between the inside set of tines and  
the seal on the transmission housing.  
4. Replace spark plug wire.  
LUBRICATION  
Proper lubrication of moving mechanical parts is critical for proper care  
and maintenance. Oil the moving parts using a 30-weight oil.  
Page 14  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
STORAGE  
PREPARE FOR STORAGE  
Follow the steps below to prepare your tiller for storage. Read your  
engine manual for detailed instructions on preparing the engine for  
storage.  
!
WARNING  
dO NOT STORE TILLER IN AN UNvENTILATEd  
AREA WhERE FUEL FUMES MAY REACh FLAME,  
SPARkS, PILOT LIGhTS OR AN IGNITEd OBjECT.  
dRAIN FUEL OUTdOORS AWAY FROM ANY  
IGNITION SOURCES. USE ONLY APPROvEd FUEL  
CONTAINERS.  
1. Protect wheels and axles from rust:  
- Coat the axles lightly with axle grease.  
2. Drain fuel system completely following engine manufacturer’s  
instructions or add fuel stabilizer to prevent fuel from gumming up  
during extended storage period.  
3. While engine is still warm, drain the oil from the engine. Refill with  
fresh oil of the recommended grade.  
4. Clean external surfaces, engine and cooling fan.  
5. Remove spark plug; pour one ounce of SAE 30 oil into spark plug  
hole.  
6. Plug hole and pull starter cord slowly to distribute oil evenly in  
cylinder head area.  
7. Reinstall spark plug.  
8. Transport unit to a suitable storage location. If you have chosen to  
use a fuel stabilizer and have not drained the fuel system, follow all  
safety instructions storage precautions in this manual to prevent the  
possibility of fire from the ignition of gasoline fumes. Remember,  
gasoline fumes can travel to distant sources of ignition and ignite,  
causing risk of explosion and fire.  
9. If there is any possibility of unauthorized use or tampering, remove  
the spark plug and store it in a safe place before storing the rototiller  
unit.Be sure to plug the spark plug hole to prevent foreign material  
from entering.  
800-ꢀ45-6007  
Page 15  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
TROUBLEShOOTING ANd REPAIR  
!
WARNING  
TROUBLEShOOTING GUIdE  
PRACTICE SAFETY AT ALL TIMES. ENGINE MUST BE  
TURNEd OFF ANd ALLOWEd TO COOL, ANd SPARk  
PLUGWIRE MUST BE dISCONNECTEd ANd SECUREd  
BEFORE ATTEMPTING ANY MAINTENANCE OR  
REPAIR.  
FAILURE TO COMPLY WITh ThIS SAFETY REQUIREMENT  
CAN RESULT IN SERIOUS PERSONAL INjURY TO YOU  
OR BYSTANdERS.  
While normal care and routine maintenance will extend the life of  
your rototiller, prolonged or constant use may eventually require  
that service be performed to allow it to continue operating properly.  
The troubleshooting guide below lists the most common problems,  
causes and remedies.  
PROBLEM  
REMEdY/ACTION  
Engine will not start  
• Add gas to gas tank.  
• Connect spark plug wire to spark plug.  
• Throttle must be positioned at choke for a cold start.  
Engine runs rough, floods during operation  
Engine is hard to start  
• Clean or replace air cleaner.  
• Drain old fuel and replace with fresh. Use gas stabilizer  
at end of season.  
• Make sure spark plug wire is securely attached to spark  
plug.  
• Drive safety control lever must be released to neutral  
to start the engine.  
Engine misses or lacks power  
• Raise the tines for shallow tilling by raising the depth  
regulator lever.  
• Clean or replace air cleaner.  
• Improper carburetor adjustment, take to authorized  
engine service center.  
• Replace spark plug and adjust gap.  
• Drain and refill gas tank and carburetor.  
Engine will not stop when throttle control is positioned at stop • See engine manual to check and adjust throttle linkage.  
Tiller moves forward during starting  
• Drive safety control lever must be released to neutral  
to start the engine.  
Tiller is difficult to control when tilling  
(machine jumps or lurches forward)  
• Lower engine speed in hard ground.  
• Raise the tines for shallower tilling by lowering the  
depth regulator lever.  
Belts squeal in neutral  
• Adjust forward belt guide:  
- turn engine off and allow muffler to cool  
- disconnect spark plug wire and secure from spark plug  
- pull down on drive safety control lever  
- manually bend forward belt guide so there is 1/16 inch  
or less clearance between belt guide and belt  
- replace spark plug wire  
Belts squeal in forward operation  
Turn engine off and allow muffler to cool.  
• Disconnect spark plug wire and secure from spark plug.  
• Release drive safety control lever to neutral.  
• Adjust engage cable.  
• Replace spark plug wire.  
Excessive heat build up in transmission/tine area during till-  
ing  
• Remove vegetation.  
• Check transmission fluid and fill if needed.  
Page 16  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
ꢀꢀ65/ꢀꢀ65B/ꢀꢀ65CE/ꢀꢀ65k hANdLEBAR PARTS  
3
4
2
9
11  
10  
5
7
1
7
6
12  
8
13  
REF. PART #  
NO.  
dESCRIPTION  
QTY.  
REF. PART # dESCRIPTION  
NO.  
QTY.  
1
2
3
4
5
6
7
3108A  
3170  
3262  
3268  
3269  
3335  
48406  
CABLE ASSEMBLY W/FERREL  
NUT, PUSH 3/8” DIA.  
1
1
1
1
1
1
2
8
504  
LOCKWASHER, SPRINg 5/16”  
NUT, HEX NYLOC 10-24  
2
1
2
1
2
4
9
53606  
53607  
53620  
8655  
DRIVE SAFETY CONTROL LEVER  
LINK, 5-3/4” LONg  
10  
11  
12  
13  
NUT, HEX JAM 5/16-24  
SPRINg, COMPRESSION  
BOLT, HEX HD 5/16-18 X 1-3/4”  
HANDLE, TOP  
HANDLE, BOTTOM  
90141  
BOLT, SFHH W/PATCH  
3/8-16 X 1” gR5  
KNOB, FIVE-STAR 5/16-18  
800-ꢀ45-6007  
Page 17  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
ꢀꢀ65PS/ꢀꢀ65kPS hANdLEBAR PARTS  
16  
15  
10  
11  
12  
5
14  
13  
6
7
8
9
17  
19  
1
4
3
18  
2
REF. PART # dESCRIPTION  
NO.  
QTY.  
REF. PART # dESCRIPTION  
NO.  
QTY.  
1
1501  
BOLT, SOC FLg HEX HD 5/16-18  
X 3/4” gR5  
4
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
53612  
53614  
53620  
53629  
53631  
53632  
53650  
60g56  
90138  
LINK 11-5/8” LONg  
1
1
1
1
2
1
1
5
4
4
PIN, CLEVIS 1/4 X 1-1/2”  
SPRINg, COMPRESSION  
BRACKET, CABLE MOUNT  
gRIP, HANDLEBAR 1” ID FLANgELESS  
NUT, PUSH 1/4”  
2
3
4
5
6
7
8
9
2104  
3108A  
3358  
3359  
503  
NUT, BI-WAY HEX LOCK 3/8-16  
CABLE ASSEMBLY W/FERREL  
MOUNT, HANDLEBAR  
4
1
1
1
1
2
1
2
HANDLEBAR WELDMENT  
BOLT, HH 5/16-18 X 1-1/2”  
LOCKWASHER, SPRINg 5/16”  
NUT, HEX NYLOC 10-24  
LEVER, CONTROL  
504  
NUT, BI-WAY LOCK 5/16-18  
BOLT, SFHH 3/8-16 X 3/4”  
53606  
53607  
NUT, HEX JAM 5/16-24  
WF516 WASHER, FLAT 5/16”  
Page 18  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
Rꢀꢀ55h/ꢀꢀ65PSCE hANdLEBAR PARTS  
19  
14  
18  
13  
15  
8
17  
2
3
16  
9
1
10  
11  
12  
20  
22  
4
7
6
21  
5
REF. PART #  
NO.  
dESCRIPTION  
QTY.  
REF. PART # dESCRIPTION  
NO.  
QTY.  
1
2
3
331059  
BOLT, HEX  
1
2
1
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
53607  
53612  
53614  
53620  
53629  
53631  
53632  
53650  
NUT, HEX JAM 5/16-24  
LINK 11-5/8” LONg  
2
1
1
1
1
2
1
1
5
4
4
W1265v0913 NUT, HEX  
3310118  
KIT, THROTTLE CONTROL  
W/HARDWARE  
PIN, CLEVIS 1/4 X 1-1/2”  
SPRINg, COMPRESSION  
BRACKET, CABLE MOUNT  
gRIP, HANDLEBAR 1” ID FLANgELESS  
NUT, PUSH 1/4”  
4
1501  
BOLT, SOC FLg HEX HD 5/16-  
18 X 3/4” gR5  
4
5
2104  
3108A  
3358  
3359  
503  
NUT, BI-WAY HEX LOCK 3/8-16  
CABLE ASSEMBLY W/FERREL  
MOUNT, HANDLEBAR  
4
1
1
1
1
2
1
6
LEVER, CONTROL  
7
60g56 NUT, BI-WAY LOCK 5/16-18  
90138 BOLT, SFHH 3/8-16 X 3/4”  
WF516 WASHER, FLAT 5/16”  
8
HANDLEBAR WELDMENT  
BOLT, HH 5/16-18 X 1-1/2”  
LOCKWASHER, SPRINg 5/16”  
NUT, HEX NYLOC 10-24  
9
10  
11  
504  
53606  
800-ꢀ45-6007  
Page 1ꢁ  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
ꢀꢀ65_ꢀꢀ65B__ꢀꢀ65k_ꢀꢀ65kPS_ꢀꢀ65CE_ꢀꢀ65PS_ꢀꢀ65PSCE  
MOTOR MOUNT & hOOd PARTS  
28  
not used for 3365K  
and 3365 KPS  
46  
18  
24  
12  
48  
32  
47  
45  
38  
29  
37  
14  
44  
10  
30  
Model ꢀꢀ65PS, ꢀꢀ65B,  
ꢀꢀ65CE drive Pulley  
38  
1
16  
15  
34  
2
13  
26  
5
35  
43  
4
40  
23  
25  
27  
36  
28  
3
36  
39  
42  
17  
33  
8
30  
9
41  
30  
MOdEL ꢀꢀ65PS_ꢀꢀ65PSCE_  
ꢀꢀ65kPS BUMPER  
20  
22  
7
7
21  
6
19  
31  
11  
Page 20  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
ꢀꢀ65_ꢀꢀ65B_ꢀꢀ65CE_ꢀꢀ65PS_ꢀꢀ65kPS_ꢀꢀ65PSCE MOTOR MOUNT & hOOd PARTS  
REF. PART #  
NO.  
dESCRIPTION  
QTY. REF. PART #  
NO.  
dESCRIPTION  
QTY.  
1
1401  
1407  
1413  
1416  
1418  
BOLT, HHCS 5/16-18 X 1-1/4” gR5  
SPRINg, FORWARD ARM  
PULLEY, FORWARD IDLER  
PIN, LINK  
1
1
1
1
1
2
4
1
1
1
1
1
25  
26  
27  
28  
29  
30  
31  
32  
3370  
BELT, FORWARD  
1
1
1
4
6
8
1
2
2
48300  
53596B  
60g56  
63118  
67538  
69170  
715  
BOLT, HHCS 5/16-18 X 2-1/4” gR5  
YOKE, CABLE  
3
4
NUT, BI-WAY LOCK 5/16-18  
BOLT, HHCS 1/4-20 X 1/2”  
NUT, HEX NYLOC 1/4-20  
PIN, DETENT 5/16” X 2”  
5
PIN, COTTER  
6
1714252 WHEEL & TIRE ASSY 11.0 X 1.75  
1960519 PUSH NUT 1/2” DIA.  
7
8
2108  
3128  
3130A  
3157  
3171  
NUT, NON-LOCKINg HEX 3/8-16  
SHIELD, TINE  
SET SCREW 1/4-20 X 1/4”  
(Part used only on 3365, 3365K,  
and 3365KPS models)  
9
10  
11  
12  
FRAME, ENgINE MOUNT  
LEVER, DEPTH REgULATOR  
33  
34  
35  
719  
WASHER, SPRINg LOCK 3/8”  
SPACER, BELT gUIDE  
1
2
1
744  
PULLEY, ENgINE, SINgLE gROOVE  
(Part used only on 3365, 3365K and  
3365KPS models)  
90140  
BOLT, HEX HD 5/16-18 X 3-1/4”  
35  
2002  
BOLT, HEX HD 3/8-16 X 1-1/2”  
(3365K and 3365KPS models only)  
1
13  
14  
15  
3182A  
3196  
3202  
BELT gUIDE & MOUNT  
1
2
2
BOLT, HHCS 1/4-20 X 7-1/2” gR5  
36  
37  
38  
WF516  
WL14  
90141  
WASHER, FLAT 5/16”  
3
2
4
SCREW, SHEET METAL 1/4 X 3/4”  
(3365, 3365B,3365CE)  
WASHER, SPRINg LOCK 1/4”  
BOLT 3/8-16X1 SFHH gR5ZN W  
PATCH  
16  
3237  
COVER, FRONT BELT  
(3365, 3365B,3365CE)  
1
MOdEL ꢀꢀ65PS/ꢀꢀ65PSCE BUMPER GUARd PARTS  
17  
18  
3275  
3305  
SHIELD, DIRT  
1
1
39  
1516  
BOLT, SOC FLANgE HEX HD,  
1/4-20 X 3/4”  
4
ENgINE, 6.50 T.R. BRIggS (3305,  
3365PS, 3365B, 3365CE)  
40  
41  
3335  
3371  
ARM LOWER HANDLEBAR  
1
1
18  
18  
18  
18  
3305CE  
3306  
ENgINE, 5.50 T.R. BRIggS (3306,  
3365)  
1
1
1
1
COVER, FRONT 4-HOLE (re-  
places 3237)  
ENgINE, 6.50 T.R. BRIggS (3365B,  
3365PS)  
42  
43  
67538  
WF14  
NUT, HEX NYLOC 1/4-20  
WASHER, FLAT 1/4”  
4
4
3307CE  
2000  
ENgINE, 8.5 T.R. BRIggS  
(3365PSCE)  
MOdEL ꢀꢀ65PS, ꢀꢀ65PSCE dRIvE PULLEY PARTS  
44  
45  
46  
47  
48  
807  
BOLT 5/16-24X3/4 W/PATCH  
BHSCS  
1
1
2
1
1
ENgINE, 7.25 T.R. KOHLER (3365K  
and 3365KPS)  
809  
WASHER FLAT 1” OD X .047  
SPACER  
19  
20  
21  
22  
23  
24  
3330  
3329  
3331  
3332  
3360  
3364  
TAIL MOUNT, LOWER  
1
1
1
1
1
1
TAIL MOUNT, UPPER  
3207  
741  
SPACER .055 THICK X .755 ID X  
1.244 OD  
SHAFT, WHEEL 1/2”  
SHAFT, TAIL MOUNT HINgE 1/2”  
IDLER ARM, FORWARD  
KEY, SQUARE 3/16” X 5/8”  
SPACER DRIVE PULLEY  
.900”  
3178  
PULLEY SINgLE gROOVE  
ENgINE  
800-ꢀ45-6007  
Page 21  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
Rꢀꢀ55h MOTOR MOUNT & hOOd PARTS  
25  
16  
36  
11  
33  
31  
23  
26  
12  
9
14  
37  
27  
34  
42  
39  
32  
1
30  
13  
3
38  
41  
29  
4
35  
25  
24  
21  
2
7
22  
35  
15  
27  
40  
MOdEL Rꢀꢀ55h BUMPER  
31  
8
17  
20  
27  
6
6
19  
5
18  
28  
10  
Page 22  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
Rꢀꢀ55h MOTOR MOUNT & hOOd PARTS  
REF. PART # dESCRIPTION  
NO.  
QTY.  
REF. PART #  
NO.  
dESCRIPTION  
QTY.  
1
1407  
1413  
1416  
1418  
SPRINg, FORWARD ARM  
PULLEY, FORWARD IDLER  
PIN, LINK  
1
1
1
1
2
4
1
1
1
1
1
23  
53194  
BOLT, HEX HD FULL THRD 3/8-24 X  
1” gR5  
1
2
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
53596B  
60g56  
63118  
67538  
69170  
712  
YOKE, CABLE  
1
4
6
8
1
1
1
2
2
1
3
NUT, BI-WAY LOCK 5/16-18  
BOLT, HEX HD CAP SCR 1/4-20 X 1/2”  
NUT, HEX NYLOC 1/4-20  
PIN, DETENT 5/16” X 2”  
4
PIN, COTTER  
5
1714252 WHEEL & TIRE ASSY 11.0 X 1.75  
1960519 PUSH NUT 1/2” DIA.  
6
7
2108  
NUT, NON-LOCKINg 3/8-16  
SHIELD, TINE  
BOLT HEX HD 5/16”-24 x 1/2”  
BOLT, HEX HD 5/16-24 X 1-3/4”  
WASHER, SPRINg LOCK 3/8”  
SPACER, BELT gUIDE  
8
3128  
717  
9
3130A  
3157  
FRAME, ENgINE MOUNT  
LEVER, DEPTH REgULATOR  
719  
10  
11  
744  
31781  
PULLEY, ENgINE, SINgLE  
gROOVE 3/4” ID MODIFIED  
809  
WASHER, FLAT 1” OD X 5/16” X .047”  
THICK  
12  
13  
14  
31782  
3182A  
3196  
SPACER, ENgINE  
3
1
2
34  
35  
36  
37  
813  
BOLT, HEX HD 5/16-24 X 1-1/4”  
WASHER, FLAT 5/16”  
1
3
1
2
BELT gUIDE & MOUNT  
WF516  
WK6  
BOLT, HEX HD CAP SCR  
1/4-20 X 7-1/2” gR5  
KEY, WOODRUFF #6  
15  
16  
17  
18  
19  
20  
21  
22  
3275D  
33055  
3329  
3330  
3331  
3332  
3360  
3370  
SHIELD, DIRT W/HOLE  
ENgINE, 5.5 HP HONDA  
TAIL MOUNT, UPPER  
TAIL MOUNT, LOWER  
SHAFT, WHEEL 1/2”  
1
1
1
1
1
1
1
1
WL14  
WASHER, SPRINg LOCK 1/4”  
MOdEL Rꢀꢀ55h BUMPER GUARd PARTS  
38  
1516  
BOLT, SOC FLANgE HEX HD  
1/4-20 X 3/4”  
4
39  
40  
41  
3335  
3371  
67538  
ARM LOWER HANDLEBAR  
COVER, FRONT 4-HOLE  
1
1
4
SHAFT, TAIL MOUNT HINgE 1/2”  
IDLER ARM, FORWARD  
BELT, FORWARD  
BOLT, SOC BUTTON HD CAP SCR SS  
1/4-20 X 1-1/2”  
42  
WF14  
WASHER, FLAT 1/4”  
4
800-ꢀ45-6007  
Page 2ꢀ  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
TINES & TRANSMISSION PARTS  
13  
15  
1
19  
14  
17  
20  
16  
7
18  
17  
22  
23  
6
3
9
5
4
2
8
4
8
21  
11  
21  
11  
10  
12  
REF. PART #  
NO.  
dESCRIPTION  
QTY.  
REF. PART #  
NO.  
dESCRIPTION  
QTY.  
1
2
1511  
1601  
BOLT, SFHH 1/4-20 X 7/8”  
9
1
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
3364  
504  
KEY 3/16 X 1/2”  
1
1
1
1
4
9
1
1
4
1
1
1
1
BEARINg, TAPERED  
(includes cone & race)  
LOCKWASHER, SPRINg 5/16”  
CASTINg, RIgHT SIDE  
CASTINg, LEFT SIDE  
56100B  
56101B  
60g56  
67538  
802  
3
4
5
6
7
8
1701  
1810  
3116  
3122  
3179  
3205W  
KEY, HALF MOON 1/4 X 1”  
SNAP RINg, EXTERNAL  
gEAR, BRASS 1” ID  
1
2
1
1
1
2
NUT, BI-WAY LOCK 5/16-18  
NUT, NYLOC 1/4”  
SHAFT, DRIVE  
SCREW, HEX HD 5/16-24 X 3/4”  
WASHER 5/16” ID X 1-5/8” OD  
BOLT, HEX HD 5/16-18 X 1-3/4”  
BEARINg, BALL R12  
PULLEY, SINgLE gROOVE  
803  
BEARINg, SEALED 1” ID (replaces 3205  
bearing & 747 spacer)  
8655  
8922  
8924  
9
3322  
3323  
3324  
3326  
SHAFT, TINE 1”  
1
1
2
1
SNAP RINg, EXTERNAL 3/4”  
10  
11  
12  
TINE SET, OUTSIDE RIgHT  
TINE SET, INSIDE  
3310TRAN TRANSMISSION, COMPLETE  
3334  
KIT, TINES W/ DRAg STAKE  
(not shown)  
TINE SET, OUTSIDE LEFT  
Page 24  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT TINE ROTOTILLERS  
1-YEAR LIMITEd WARRANTY  
Terms and Conditions  
Ardisam, Inc., a manufacturing company, warrants this EARThQUAkE® FRONT TINE ROTOTILLER to be free from  
defects in the material or workmanship for a period of one year from the date of purchase. During the one-year warranty  
of this product, Ardisam will furnish 100% parts and labor to correct any defect caused by faulty material or workmanship.  
Items subject to normal wear and tear, such as belts, batteries, tines, shear bolts and tires, due to the nature of their  
function are not covered under this warranty. Any unit used in a commercial application is covered for a period of 90  
days after purchase. The engine is covered under a separate warranty issued by the engine manufacturer as stated in  
the engine manual.  
If warranty work needs to be done, contact your place of purchase or Ardisam, Inc., for an authorized service center  
in your area. Ardisam will make the necessary repairs if a service center is not available. To obtain warranty service  
and/or replacement instructions, you must have prior approval from Ardisam before shipping your package to  
us by calling our customer service department at 800-ꢀ45-6007 Monday through Friday from 8 a.m. to 5 p.m., for  
a return material authorization number (RMA#). All items must be shipped prepaid. Ardisam, Inc. will at no charge,  
repair or replace, at their discretion, any defective part which falls under the conditions stated above.  
Ardisam retains the right to change models, specifications and price without notice.This product if used as intended, will  
give you years of trouble free service. We hope you will enjoy the quality of our products for years to come.  
For replacement parts, phone 800-ꢀ45-6007 or go online to www.GetEarthquake.com.  
This warranty applies to the original owner with a proof of purchase and is not transferable. It supersedes all other war-  
ranties either expressed or implied and all other obligations to liabilities on our part. Ardisam, Inc. does not assume, and  
does not authorize any other person to assume for us, any liability in connection with the sale of our products.  
The warranty applies only to products which have not been subjected to negligent use, misuse, alteration, accident or  
repairs made by anyone not certified by Ardisam, Inc.This guarantee is void unless the warranty card is properly filled out  
EARTHQUAKE  
A Division of Ardisam, Inc.  
1160 Eighth Avenue; P.O. Box 666  
Cumberland, Wisconsin 54829  
800-345-6007 · Fax (715) 822-4180  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
NOTES  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
Page 26  
800-ꢀ45-6007  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR INSTRUCTIONS ANd PARTS  
Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE  
NOTES  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
_____________________________________________________________________________________________  
800-ꢀ45-6007  
Page 27  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Visit www.ardisam.com and discover more innovations that will  
benefit you throughout the year.  
IMPORTERS/ REPAIR CENTERS (FOR U.k. CUSTOMERS)  
ROChFORd GARdEN MAChINERY LTd.  
WINCANTON BUSINESS PARk , WINCANTON  
SOMERSET, ENGLANd, BAꢁ, ꢁRS  
Earthquake, A Division of Ardisam, Inc.  
1160 Eighth Avenue; P.O. Box 666  
Cumberland, Wisconsin 54829  
800-345-6007 · Fax (715) 822-4180  
GetEarthquake.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Edirol Computer Drive UM 1EX User Manual
Flaircomm Technologies GPS Receiver GPSBT560 User Manual
Fujitsu Scanner M3093DE DG User Manual
Fujitsu Switch MB3842 User Manual
GE Convection Oven PT970SM User Manual
Gefen Stereo Amplifier EXT AVSCALER PRO User Manual
GE Freezer FCM13 User Manual
GE Gas Heater JGB910 User Manual
Generac Power Systems Automobile Parts 0F9765MNL User Manual
GE Oven PSB2200 User Manual