Gefen Stereo Amplifier EXT AVSCALER PRO User Manual

Audio/Video Scaler  
Pro with Amplifier  
EXT-AVSCALER-PRO  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
1
2
3
4
5
6
7
8
9
Introduction  
Operation Notes  
Features  
Unit Panel Layout  
Unit Panel Descriptions  
Unit Panel Descriptions  
Connecting The Audio/Video Scaler Pro with Amplier  
RMT-SR-IR Remote Description  
Operating The Audio/Video Scaler Pro with Amplier  
15 RMT-SR-IR Remote Installation  
16 RMT-SR-IR Code Conguration  
17 RS-232 Serial Control Interface  
18 Rack Mount Installation  
19 Specications  
20 Warranty  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Congratulations on your purchase of the Audio/Video Scaler Pro with Amplier.  
Your complete satisfaction is very important to us.  
Gefen  
Gefen delivers innovative, progressive computer and electronics add-on solutions  
that harness integration, extension, distribution and conversion technologies.  
Gefen’s reliable, plug-and-play products supplement cross-platform computer  
systems, professional audio/video environments and HDTV systems of all sizes  
with hard-working solutions that are easy to implement and simple to operate.  
The Gefen Audio/Video Scaler Pro with Amplier  
The Gefen Audio/Video Scaler Pro is an all-in-one, commercial-grade, rack-  
mountable AV switcher and scaler for a myriad of AV source types. Amplied  
20W audio outputs for external speakers save further space by removing the  
need for a separate amplier. The Gefen Audio/Video Scaler Pro allows you to  
scale video and digitally enhance key aspects such as color, aspect ratio, and AV  
noise. External audio and video are digitized and combined into an HDMI output  
signal along with external digital audio (S/PDIF and TOSLINK).  
Video inputs can be standard denition or high denition television, computer  
or High-Denition DVI-I (DVI-A or DVI-D), Component, Composite, S-Video,  
and HDMI resolutions of up to 1080p. Outputs consist of two HDMI digital video  
outputs, two digital audio outputs (S/PDIF, TOSLINK), and two 20W speaker  
terminal outputs.  
Anything from set-top boxes and DVD players to the next generation of gaming  
consoles including the Xbox 360 and PS3 can be plugged into the Audio/Video  
Scaler Pro.  
Computer users will especially benet with the scaling of VGA and DVI video to  
make better use of their viewing areas on wide screen monitors or televisions.  
How It Works  
Audio/Video sources are connected to free ports on the scaler (see the next  
paragraph for further details). Output devices such as HD displays connect to  
one of the HDMI outputs. Easy to use on-screen menus accessible through  
the IR remote control allow for effortless setup and image adjustment to  
accommodate different viewing modes and screen sizes.  
In order for HDMI output to contain digital audio, each video input source must be  
paired with a like type of analog or digital audio in order for the scaler to output  
HDMI with digital audio. For example, analog video sources VGA, Component  
and Composite/S-Video are input along with analog 2-channel L/R audio. For  
multichannel digital results, two HDMI or DVI-D sources could be input with  
external digital audio (S/PDIF or TOSLINK). The result in both cases is a single  
HDMI signal emerging from the two HDMI output jacks, with both embedded and  
external digital audio available on the coaxial and optical outputs.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION NOTES  
READ THESE NOTES BEFORE INSTALLING OR  
OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER  
When initially powering on HDMI or DVI-D sources, it is important to have  
the A/V Scaler Pro with Amplier’s input selected to that source to ensure  
that the EDID (display information) is relayed properly.  
Only use speakers with an impedance of 8Ω with the A/V Scaler Pro with  
Amplier.  
Discrete switching is available using the RS-232 serial communications port.  
Please see page 17 for more information.  
Only 2-channel stereo audio sources are output through the amplied  
speaker terminals. Multi-channel audio will not be output through these  
speaker outputs.  
HDMI 1.2 compliant  
HDCP compliant.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Features  
Both digital and analog inputs are format converted and pixel re-scaled  
through the Home Audio/Video Scaler Pro with Amplier. It outputs a large  
range of formats and resolutions that will easily match the native resolution/  
format of your display to ensure highest picture quality.  
DVI/HDCP/HDMI compliant input: Operates up to 165Mhz (Up to WUXGA  
@60Hz)  
Supports digital HD output up to 1080p  
Integrated 8-bit triple-ADC/PLL.  
Dual high quality scaling engines.  
Dual 3-D motion adaptive de-interlacers with smooth low-angle edge.  
Automatic 3:2 pull-down & 2:2 pull-down detection and recovery.  
High performance frame rate conversion engine.  
The Proprietary Advanced Color Engine technology gives: Brilliant and fresh  
color, Intensied contrast and details, Vivid skin tone, Sharp edge, Accurate  
and independent color control  
Option to select audio input from HDMI or TOSLINK/SPDIF audio source  
3D noise reduction on analog inputs only.  
Operates through on-screen display (OSD) menu control and remote control  
Digital Audio Delay to match audio/video timing  
Less then one frame delay allowing for gaming  
Aspect Ratio Control  
Reset Button  
Package Includes  
(1) Gefen Audio Video Scaler Pro  
(1) 6 Foot HDMI Cable (M-M)  
(1) 24V DC Power Supply  
(1) IR Remote control  
(1) Set of Rack Ears  
(1) User’s Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNIT PANEL LAYOUT  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNIT PANEL DESCRIPTIONS  
1
2
3
IR Receiver  
This receivers will accept commands from the included RMT-SR-IR remote  
control. There must be line-of-sight between this receiver and the remote control  
for successful operation to occur.  
Power Indicator LED  
This LED indicator will become active once the included 5V DC power adapter  
has bee properly connected between the sender unit and an open wall power  
socket.  
Selected Input LED  
Each input source has an LED that will become active when it is selected. All  
input sources are listed below.  
CV  
SV  
Comp  
HDMI 1  
HDMI 2  
DVI  
Composite input  
S-video input  
Component input  
HDMI 1 input  
HDMI 2 input  
DVI input  
4
5
6
7
8
RS-232 Serial Communications Port  
This port can accept commands from an RS-232 device to control the input  
switching. Please see page 17 for more details on this feature.  
Analog Stereo Input Port for Composite  
This input will accept audio from one pair of RCA analog stereo cables for use  
with the composite input.  
Composite Input Port  
This input will accept video from one RCA composite source. The composite  
source will be digitally converted for output through the HDMI Output Port.  
Analog Stereo Input Port for Component  
This input will accept audio from one pair of RCA analog stereo cables for use  
with the component input.  
24V Power Supply Input Port  
Connect the included 24V DC power supply to this input. Once properly  
connected between the unit and an open wall power socket, the Power Indicator  
LED should become active.  
9
Stereo Speaker Terminals  
The stereo speaker output terminals use spring-loaded compression. These  
terminals are designed to accept 8Ω speakers.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNIT PANEL DESCRIPTIONS  
10 Reset Button  
This button will reset the unit and cycle power off and on again.  
11 Digital Audio Output Ports  
There are two digital audio output types, S/PDIF (coaxial) and TOSLINK  
(optical). Both digital outputs are always active.  
12 HDMI Output Port  
Connect the HDMI capable device to this output port. This output port supports  
both audio and video.  
13 Digital Audio Input Ports for HDMI 2  
There are two digital audio input types, S/PDIF (coaxial) and TOSLINK (optical).  
Both these inputs are individually selectable in the GUI for use with the HDMI 2  
input.  
14 HDMI 2 Input Port  
Connect a HDMI source device to this input port. This input port supports both  
audio and video.  
15 Digital Audio Input Ports for HDMI 1  
There are two digital audio input types, S/PDIF (coaxial) and TOSLINK (optical).  
Both these inputs are individually selectable in the GUI for use with the HDMI 1  
input.  
16 HDMI 1 Input Port  
Connect a HDMI source device to this input port. This input port supports both  
audio and video.  
17 Analog Stereo Input Port for DVI  
This input will accept audio from one 3.5mm analog stereo cable for use with the  
DVI input.  
18 DVI-I Input Port  
This input port will accept a DVI-A (analog) or DVI-D (digital) signal. DVI-A  
signals will be digitally converted for output through the HDMI Output Port.  
19 Analog Stereo Input Port for S-Video  
This input will accept audio from one pair of RCA analog stereo cables for use  
with the s-video input.  
20 S-Video Input Port  
This input will accept video from one s-video source. The s-video source will be  
digitally converted for output through the HDMI Output Port.  
21 Component Input Port  
This input will accept video from one 3 RCA component source. The component  
source will be digitally converted for output through the HDMI Output Port.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER  
How to Connect the Audio/Video Scaler Pro with Amplier  
1. Connect source devices to the Audio/Video Scaler Pro with Amplier using  
user supplied cables. The following input options are available.  
Composite - Single RCA video cable.  
S-Video  
- Single s-video cable.  
Component - 3 RCA video cables.  
HDMI 1  
HDMI 2  
DVI  
- Single HDMI cable.  
- Single HDMI cable.  
- Single DVI-I, DVI-A, or DVI-D cable.  
NOTE: All analog video sources will be converted to digital an output through the  
HDMI Output Port.  
2. Connect audio sources to the Audio/Video Scaler Pro with Amplier using  
user supplied cables. Audio input options are available for the following  
source inputs.  
Composite - Analog stereo using a 2 RCA analog stereo cable.  
S-Video  
- Analog stereo using a 2 RCA analog stereo cable.  
Component - Analog stereo using a 2 RCA analog stereo cable.  
HDMI 1  
HDMI 2  
DVI  
- Embedded audio through the HDMI cable and both a digital  
S/PDIF (coaxial) and digital TOSLINK (optical) using digital  
audio cables.  
- Embedded audio through the HDMI cable and both a digital  
S/PDIF (coaxial) and digital TOSLINK (optical) using digital  
audio cables.  
- Analog stereo using a 3.5mm analog stereo cable.  
NOTE: All analog sources will be converted to digital and output through the  
HDMI, digital S/PDIF, and digital TOSLink outputs.  
3. Connect a HDMI cable device to the Audio/Video Scaler Pro with Amplier’s  
HDMI Output Port using the supplied HDMI cable.  
4. Connect a right and left speaker to the spring-loaded speaker terminals.  
NOTE: Speaker impedance must be 8Ω or higher.  
5. Optionally, connect the digital S/PDIF (coaxial) or digital TOSLINK (optical)  
audio outputs to a digital audio input device.  
6. Connect the included 24V DC power supply to the Audio/Video Scaler Pro  
with Amplier and to an open wall power socket.  
7. Power on the display rst and the sources second.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
RMT-SR-IR REMOTE DESCRIPTION  
1
3
2
4
6
8
5
7
9
1. Output - Cycles through the available output resolutions. Please see the section  
A/V Scaler Pro with Amplier CONFIGURATION / Output on page 8 for the  
output resolution table.  
2. Input - Cycles though all of input sources. The selectable inputs are  
Composite, S-Video, Component, HDMI 1, HDMI 2, and DVI.  
3. Power - Turns the unit on and off (standby).  
4. Exit - Exits the current menu option and menu system.  
5. Menu - Displays the menu system for adjustment of options.  
6. Navigation Keys - These include up, down, left, and right buttons for  
navigating the menu system. (When not in the GUI, up and down will control  
the up and down volume for the amplied speaker outputs.)  
7. The OK button will select specic menu options for adjustment and will also  
conrm/cycle-through selections (Output/Input). (When not in the GUI, the  
OK button will mute/un-mute all audio outputs)  
8. Reset - Resets the input and output resolutions to factory default.  
9. Auto Adjust - Sets the display for optimal resolution and aspect ratio based  
on the display’s EDID information and the currently selected sources output  
resolution.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER  
Entering the Menu System  
Pressing the Menu button on the included RMT-SR-IR remote control will display the  
GUI (graphical user interface) for adjustment options.  
The GUI is overlaid onto the outgoing video to the display. Therefore, the selected  
source must be outputting a compatible resolution for viewing on the display. If video  
is not visible on the display, the GUI will also fail to be displayed. To correct this,  
please follow the steps below.  
1. Verify that the source is on and outputting a video signal.  
2. Verify that the RMT-SR-IR remote channel is in the default position (page 13).  
3. Verify that the A/V Scaler Pro with Amplier is selected to the chosen source.  
4. Press the Output button on the RMT-SR-IR remote control to cycle through  
output resolutions until video is displayed. Please see page 8 for a listing of the  
available output resolutions and cycle order.  
Navigation  
Use the directional buttons to navigate the menu system. Press the OK button to  
enter a sub category and also to select a menu item for adjustment. Use the Left and  
Right buttons to adjust the selected menu item. Press the EXIT or OK button to return  
to the previous menu. Use the LEFT and RIGHT buttons to adjust selected options.  
Pressing the EXIT button while in the main menu will exit out of the menu system.  
MAIN MENU  
The following are the main menu options. Use the UP and DOWN buttons to choose  
your desired subcategory and press OK to enter it.  
VIDEO  
COLOR  
OUTPUT  
OSD  
AUDIO  
INFORMATION  
VIDEO  
Picture Mode  
Preset and user congurable settings for different viewing scenarios. Preset settings  
will not allow user adjustment. Only the USER option will allow customized video  
settings. The USER settings are saved.  
Options:  
• Standard - useful for general content  
• Movie - useful for dimly lit environments  
• Vivid - useful for accentuating colors for a more vibrant image  
• User - user congurable settings  
NOTE: User settings are saved. However, user settings for the digital inputs (HDMI  
1, 2 and DVI) are linked and user settings for the analog inputs (Composite, S-Video,  
and Component) are linked. i.e. adjustments to video user settings made on HDMI 1  
will be reected in HDMI 2.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THEAUDIO/VIDEO SCALER PRO WITHAMPLIFIER  
VIDEO CONTINUED  
Press OK to begin adjusting settings. Use the LEFT and RIGHT buttons to change  
settings. Press the OK button once the desired settings are made.  
Contrast  
Adjusts the contrast in increments of 1 on a scale of 1 to 100 (default 50).  
Brightness  
Adjusts the brightness in increments of 1 on a scale of to 100 (default 50).  
Hue  
Adjusts the hue in increments of 1 on a scale of 1 to 100 (default 50).  
Saturation  
Adjusts the saturation in increments of 1 on a scale of 1 to 100 (default 50).  
Sharpness  
Adjusts the sharpness in increments of 1 on a scale of 1 to 100 (default 50).  
Scale  
Adjusts the aspect ratio of the video.  
Options: Full, Overscan, Underscan, Letterbox Underscan, Pan Scan Underscan,  
Letterbox Full, Pan Scan Full  
4:3 Source  
Example  
16:9 Source  
Example  
Full - Stretches the image to ll the screen  
Overscan - Stretches the image to fullscreen and just beyond the border of the display  
Underscan - Stretches the image to fullscreen and just within the border of the screen  
Letterbox Underscan - Stretches the image to 16:9 aspect ratio with underscan  
Pan Scan Underscan - Stretches the image to 4:3 aspect ratio with underscan  
Letterbox Full - Stretches the image to 16:9 aspect ratio without underscan  
Pan Scan Full - Stretches the image to 4:3 aspect ratio without underscan  
N.R. (Noise Reduction) - Only for Composite and S-Video Inputs  
Reduces video noise inherent in analog video signals.  
Options:  
• Off - default  
• Low  
• Middle  
• High  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THEAUDIO/VIDEO SCALER PRO WITHAMPLIFIER  
VIDEO CONTINUED  
H-Pos (Horizontal Position)  
Adjusts the image’s horizontal position on the screen.  
• Adjusts in increments of 1 on a scale of 1 to 100 (default is 50)  
V-Pos (Vertical Position)  
Adjusts the image’s vertical position on the screen.  
• Adjusts in increments of 1 on a scale of 1 to 100 (default is 50)  
Y/C Separation - Only for Composite Input  
Selects the method in which the brightness and color are separated from the  
composite video signal.  
Options:  
• Auto - automatically selects the optimal method (default)  
• 2D - Separation based on single frame analysis  
• 3D - Motion adaptive color separation based on multiple frame analysis  
Coring - Only for Composite Input  
Adjusts the threshold level for pixel noise evaluation. This relates to how much of the  
image is processed in regards to noise reduction.  
• Adjusts in increments of ~6.5 on a scale of 1 to 100. (default is 20)  
OUTPUT  
This menu sets the output resolution for all video sources. Use the directional buttons  
to choose your desired output resolution and press the OK button to set it. These  
outputs can be cycled through in the numbered order below when not in the menu  
system by pressing the OUTPUT button on the RMT-SR-IR remote control.  
VGA  
SVGA  
XGA  
480i  
576i  
WXGA  
WSXGA  
WUXGA  
Native  
1
2
3
4
6
11  
12  
13  
14  
15  
16  
17  
18  
480p  
576p  
7
720p 60  
1080i 60  
1080p 60  
720p 50  
1080i 50  
1080p 50  
8
SXGA  
UXGA  
9
5
10  
Native  
This option will select the native resolution of the connected display based on the  
EDID from the display.  
NOTE: If a resolution that is not supported by the display is selected, the menu GUI  
will not longer be visible. To correct this, press the OUTPUT button on the RMT-SR-  
IR remote control and cycle through the output resolutions until a supported mode is  
displayed.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THEAUDIO/VIDEO SCALER PRO WITHAMPLIFIER  
COLOR  
Press OK to begin adjusting settings. Use the LEFT and RIGHT buttons to change  
settings. Press the OK button once the desired settings are made.  
Color Tone  
Sets the color for the appearance of white. Only the USER option will allow  
customized settings. The USER settings are saved.  
• Normal - Normal white color appearance (default)  
• Warm - Slight red shift to white appearance  
• Cool - Slight blue shift to white appearance  
• User - User adjustments to Red, Green, and Blue  
Red  
Adjust the red color in regards to the appearance of white for the USER setting.  
• Adjustments are in increments of 1 from 1 to 100 (default is 50)  
Green  
Adjusts the green color in regards to the appearance of white for the USER setting.  
• Adjustments are in increments of 1 from 1 to 100 (default is 50)  
Blue  
Adjusts the blue color in regards to the appearance of white for the USER setting.  
• Adjustments are in increments of 1 from 1 to 100 (default is 50)  
OSD (ON SCREEN DISPLAY)  
Press OK to begin adjusting settings. Use the LEFT and RIGHT buttons to change  
settings. Press the OK button once the desired settings are made.  
H-Pos (Horizontal Position)  
Adjusts the OSD’s horizontal position on the screen.  
• Adjustments are in increments of 1 from 1 to 100 (default is 50)  
V-Pos (Vertical Position)  
Adjusts the OSD’s vertical position on the screen.  
• Adjustments are in increments of 1 from 1 to 100 (default is 50)  
Time Out  
Adjusts the amount of idle time, in seconds, before the OSD is automatically exited.  
• Adjustments are in increments of 1 from 1 to 100 (default is 10)  
Background  
Sets the transparency level of the OSD background.  
• Adjustments are in increments of ~12.5 on a scale of 1 to 100 (default is 50)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THEAUDIO/VIDEO SCALER PRO WITHAMPLIFIER  
OSD (ON SCREEN DISPLAY) CONTINUED  
Remote Channel  
Sets the remote channel for use with the RMT-SR-IR remote control. If the selected  
channel in this menu and does not match the channel set in the RMT-SR-IR remote,  
the unit will cease to respond to IR commands from the remote.  
• Selectable remote channel from 1 to 4 (default is 1)  
AUDIO  
Press OK to begin adjusting settings. Use the LEFT and RIGHT buttons to change  
settings. Press the OK button once the desired settings are made.  
Source  
Sets the audio source for current input.  
Options for Composite:  
• L/R1 - Composite analog audio input (default)  
Options for S-Video:  
• L/R2 - S-Video analog audio input (default)  
Options for Component:  
• L/R3 - Component analog audio input (default)  
Options for HDMI 1:  
• HDMI1 - HDMI 1 internal audio (default)  
• Optical1 - Optical input 1  
• Coaxial1* - SPDIF input 1  
Options for HDMI 2:  
• HDMI2 - HDMI 2 internal audio (default)  
• Optical2 - Optical input 2  
• Coaxial2* - SPDIF input 2  
Options for DVI:  
• L/R4 - DVI analog audio input (default)  
Delay  
Sets the audio delay for lip syncing correction.  
• Off - No delay (default)  
• 40ms - 40 millisecond audio offset  
110ms - 110 millisecond audio offset  
• 150ms - 150 millisecond audio offset  
Sound  
Select general audio output function. Mute/Un-mute can also be accessed by using  
the OK button on the included RMT-SR-IR remote control when not in the GUI.  
• On - Use selected audio source (default)  
• Mute - No sound output  
*Coaxial is also know as SPDIF  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THEAUDIO/VIDEO SCALER PRO WITHAMPLIFIER  
AUDIO CONTINUED  
Volume  
Adjusts the amplied speaker output volume. The volume can also be accessed by  
using the UP (volume up) and DOWN (volume down) buttons on the included RMT-  
SR-IR remote control when not in the GUI.  
• Adjusts in increments of 1 on a scale of 1 to 100 (default is 50)  
INFORMATION  
This menu will allow the user to view general information. There are no congurable  
options in this menu.  
• Source - Displays current source  
• Input - Displays current input source resolution  
• Output - Displays current output resolution  
• Version - Displays current rmware revision  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RMT-SR-IR REMOTE INSTALLATION  
1. Remove battery cover from the back of the RMT-SR-IR remote.  
2. Verify that dip switches 1 & 2 are in the down (OFF) position. (See page 13)  
3. Insert the battery, hold the battery so that you can see the positive side  
facing up. The side that is not marked must be facing down.  
4. Test the RMT-SR-IR remote by pressing ONLY one button at a time. The  
indicator light on the remote will ash once each time you press a button.  
WARNING:  
Do not press multiple buttons simultaneously and do NOT press buttons rapidly.  
These actions will cause the remote to reset and steps 1-4 will have to be  
repeated.  
Note: The RMT-SR-IR ships with two batteries. Only one battery is required for  
operation, the other battery is complimentary.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RMT-SR-IR CODE CONFIGURATION  
How to Resolve IR Code Conicts  
In the event that IR commands from other remote controls conict with the  
supplied RMT-SR-IR remote control, changing the remote channel will alleviate  
this issue. The RMT-SR-IR remote control has DIP SWITCHES for conguring  
the remote channel. The A/V Scaler Pro with Amplier must match the remote  
channel set in the RMT-SR-IR remote control. Please see page 10 for instruction  
on how to congure the channel on the A/V Scaler Pro with Amplier. By default,  
both the A/V Scaler Pro with Amplier and the RMT-SR-IR remote control are set  
to Channel 1.  
Remote  
Remote Channel 1:  
Default  
Remote Channel 2:  
Remote Channel 4:  
1
1
2
2
1
1
2
2
Remote Channel 3:  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS-232 SERIAL CONTROL INTERFACE  
1 2 3 4 5  
1 2 3 4 5  
6 7 8 9  
6 7 8 9  
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface  
Binary Table  
Corresponding  
RMT16-IR  
Button  
Corresponds to  
ASCII  
Binary  
Input  
1
2
5
6
g
1
2
0011 0001  
0011 0010  
0011 0101  
0011 0110  
0110 0111  
Input Cycle  
Composite  
Component  
HDMI 1  
5
6
16  
HDMI 2  
These commands can be used for discrete switching of the listed inputs. To  
access the s-video input, use the ASCII command 2 followed by ASCII command  
1 to switch to the composite input and then cycle to the s-video input. Likewise, to  
access the DVI input, use the ASCII command G followed by ASCII command 1  
to switch to the HDMI 2 input and then cycle to the DVI input. There are currently  
no discrete commands available to immediately access the s-video and DVI  
inputs.  
RS232 Settings  
Bits per second ................................................................................................. 19200  
Data bits .................................................................................................................... 8  
Parity .................................................................................................................. None  
Stop bits .....................................................................................................................1  
Flow Control ....................................................................................................... None  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RACK MOUNT INSTALLATION  
Rack mount ears are provided for installation of this unit into a 1U rack mount  
space.  
1. Locate the side screws on the unit.  
2. Remove the front 2 screws that are located closest to the front of the unit.  
3. Using the removed screws, screw the rack mounting bracket into the unit.  
4. Repeat the procedure on the opposite side of the unit.  
1
Front of unit  
Rear of unit  
2
3
4
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Digital Video Amplier Bandwidth ............................................................ 165 MHz  
Component Video Bandwidth ................................................................... 350 MHz  
Input DDC Signal ......................................................................... 5 Volts p-p (TTL)  
Input Video Signal .............................................................................. 1.2 Volts p-p  
Maximum Resolution ............................................................... 1080p/1920 x 1200  
Analog Video Connector (input) ............................. 1x VGA (via DVI-I Connector)  
Analog Video Connector (input) .................................. 3x RCA Component Jacks  
Analog Video Connector (input) .............................................. 1x RCA Composite  
Analog Video Connector (input) ........................................................... 1x S-Video  
Analog Audio Connector (input) ............................................. 1x 3.5mm Mini Jack  
Digital Video Connector (input) ............................ 1x DVI-D (via DVI-I Connector)  
Digital Video Connector (input) ............................................................... 1x HDMI  
Digital Video Connector (output) ............................................................. 2x HDMI  
Digital Audio Connector (output) ............................................ 1x Optical TOSLINK  
Digital Audio Connector (output) ............................................... 1x Coaxial S/PDIF  
Analog Audio Connector (output) ............................... 2x Pair L+R Spring-Loaded  
Speaker Terminals (Amplied 20W RMS max.)  
Power Supply/Power Consumption ................................... 24V DC/60 Watts max.  
Dimensions ...................................................................... 17.2”W x 2.12”H x 6.8”D  
Shipping Weight ............................................................................................ 6 lbs.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Electro Voice Portable Speaker Sentry III User Manual
Excell Precision Scale Counting Scale User Manual
Exmark Lawn Mower 4500 371 User Manual
Fagor America Dishwasher LFA 073 IT User Manual
FEIN Power Tools Drill ASKEU 636 Kin User Manual
Genie DVR BDVR 16 User Manual
GE Refrigerator 2 Cubic Foot Models User Manual
GE Ventilation Hood 49 80565 User Manual
Gianni Industries Door EB 190 User Manual
Gigabyte Network Card GA 8I865GMFK 775 User Manual