ELED Strip RGBW
Introduction
Unpacking: Thank you for purchasing the ELED Strip RGBW by Ela-
tion Professional®. Every ELED Strip RGBW has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your fix-
ture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Do not return this unit to your dealer without first
contacting customer support.
ELED Strip RGBW
Introduction: The Elation Professional® ELED Strip RGBW is part of
a continuing pursuit to create high quality intelligent lighting. The ELED
Strip RGBW is a DMX intelligent, high powered LED color bar. This
effect can be used in a stand alone mode or connected in a Master/
Slave configuration. The unit can also be controlled via DMX controller.
This wash has four operating modes: Sound Active mode, Static Color
mode, Preset mode, RGBW mode, and DMX control mode.
Customer Support: Elation provides a customer support line, to
provide set up help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit us
tions. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m.
Pacific Standard Time.
Voice:
Fax:
(323) 582-3322
(323) 582-3108
E-mail:
User Instructions
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
Elation.
PLEASE recycle the shipping carton when ever possible.
©Elation Professional®
6122 S. Eastern Ave.
Los Angeles CA. 90040
Rev. 11/08
Download from Www.Somanuals.com. All Manuals Search And Download.
ELED Strip RGBW
Set Up
ELED Strip RGBW
Set Up
Power Supply: Before plugging your unit in, be sure the source volt-
age in your area matches the required voltage for your Elation ELED
Strip RGBW. The Elation ELED Strip RGBW is a 100v ~ 220v unit.
Because of voltage setup of the unit you do not have to worry about
wall output voltage. This unit is compatiable with all wall outputs.atches
the wall outlet voltage before attempting to operate you fixture.
Notice: Be sure to follow figures two and three when making your own
cables. Do not use the ground lug on the XLR connector. Do not con-
nect the cable’s shield conductor to the ground lug or allow the shield
conductor to come in contact with the XLR’s outer casing. Grounding
the shield could cause a short circuit and erratic behavior.
COMMON
1
2
1
DMX +
DMX -
DMX512 OUT
3-PIN XLR
DMX512 IN
3-PIN XLR
3
3
DMX-512: DMX is short for Digital Multiplex. This is a universal pro-
tocol used as a form of communication between intelligent fixtures
and controllers. A DMX controller sends DMX data instructions from
the controller to the fixture. DMX data is sent as serial data that trav-
els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-
minals located on all DMX fixtures (most controllers only have a DATA
“OUT” terminal).
2
Figure 2
XLR Female Socket
XLR Male Socket
XLR Pin Configuration
Pin 1 = Ground
1 Ground
2 Cold
2 Cold
1 Ground
Pin 2 = Data Compliment (negative)
3 Hot
3 Hot
Pin 3 = Data True (positive)
Figure 3
DMX Linking: DMX is a language allowing all makes and models of
different manufactures to be linked together and operate from a single
controller, as long as all fixtures and the controller are DMX compli-
ant. To ensure proper DMX data transmission, when using several
DMX fixtures try to use the shortest cable path possible. The order
in which fixtures are connected in a DMX line does not influence the
DMX addressing. For example; a fixture assigned a DMX address of 1
may be placed anywhere in a DMX line, at the beginning, at the end,
or anywhere in the middle. When a fixture is assigned a DMX address
of 1, the DMX controller knows to send DATA assigned to address 1
to that unit, no matter where it is located in the DMX chain.
Special Note: Line Termination. When longer runs of cable are
used, you may need to use a terminator on the last unit to avoid erratic
behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con-
nected between pins 2 and 3 of a male XLR connector (DATA + and
DATA -). This unit is inserted in the female XLR connector of the last
unit in your daisy chain to terminate the line. Using a cable terminator
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic
behavior.
Termination reduces signal errors and
1
avoids signal transmission problems
3
and interference. It is always advisable
2
to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)
and PIN 3 (DMX +) of the last fixture.
Figure 4
Data Cable (DMX Cable) Requirements (For DMX Operation):
The ELED Strip RGBW can be controlled via DMX-512 protocol. The
ELED Strip RGBW has 6 DMX modes, please see pages 10-12 for the
different modes. The DMX address is set on the back panel of the ELED
Strip RGBW. Your unit and your DMX controller require a standard 3-
pin XLR connector for data input and data output
5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR
connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures
may be implemented in a 3-pin XLR DMX line. When inserting stan-
dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be
used, these adaptors are readily available at most electric stores. The
chart below details a proper cable conversion.
(Figure 1). If you are making your own cables, be sure
to use standard two conductor shielded cable (This
3-Pin XLR to 5-Pin XLR Conversion
cable may be purchased at almost all pro sound and
lighting stores). Your cables should be made with a
male and female XLR connector on either end of the
cable. Also remember that DMX cable must be daisy
Conductor
Ground/Shield
3-Pin XLR Female (Out)
5-Pin XLR Male (In)
Pin 1
Pin 1
Pin 2
Pin 3
Data Compliment (- signal)
Data True (+ signal)
Not Used
Pin 2
Pin 3
Do Not Use
Do Not Use
Not Used
Figure 1
chained and can not be split.
Download from Www.Somanuals.com. All Manuals Search And Download.
ELED Strip RGBW
Operating Instructions
ELED Strip RGBW
Operating Instructions
2. Set the “Master” unit to your desired mode or operation.
3. For the “Slave” unit(s), press the MODE button until the display to
shows “XXX7”.
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE
button until 0010 is displayed, press the UP button to display 0020.
Now the display will disappear after 10s. Press any button to turn
the display on again. Be advised though that the display will turn off
automatically after 10 seconds.
4. Connect the “Slave” unit or units and they will automatically start to
follow the “Master.”
Color Mode:
1. Plug the fixture in and press the MODE button until “XXX8” is dis-
played.
To set the display press the MODE button until 0010 is displayed. The
display will now stay on at all times.
0010= LCD display on at all times.
2. There are 32 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons.
0020= LCD display shuts off after 10 seconds.
Operating Modes:
Preset Program Mode:
You can use the ELED Strip RGBW in five ways:
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller.
• Color mode - Select one of 32 colors to remain static
• Preset mode - There are 32 built in programs to choose from.
• RGBW mode - Control the intensity of all four colors adjusting the
intensity to your desire.
1. Plug the fixture in and press the MODE button until “XXX9” is dis-
played.
2. There are 20 programs to choose from. Select your desired program
by pressing the UP and DOWN buttons. You can set your program
speed by following the instructions below.
Preset Program Mode Adjustment:
1. To adjust the speed of your Preset mode program press the MODE
button until “XXX ” is displayed. “XXX ” is the next mode after Pre-
set Mode.
• Sound-Active mode - The unit will react to sound, chasing through the
built in programs.
Master-Slave Operation:
2. Press the UP or DOWN buttons to make the adjustmetns. Set to your
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units built-in programs.
Any unit can act as a Master or as a Slave however, only one unit can be
programmed to act as the “Master.”
desire.
RGBW Mode:
1. Plug the fixture in and press the MODE button until:
2. When XXX
is displayed you are in Red dimming mode. Press the
UP and DOWN buttons to adjust intensity.
Master-Slave Connections and Settings:
3. When XXX
is displayed you are in Green dimming mode. Press the
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR microphone cables to link your units together.
Remember that the Male XLR connector is the input and the Female
XLR connector is the ouput. The first unit in the chain (master) will
use the female XLR connector only. The last unit in the chain will use
the male XLR connector only.
UP and DOWN buttons to adjust intensity.
3. When XXX
is displayed you are in Blue dimming mode. Press the
UP and DOWN buttons to adjust intensity.
4. When XXXE is displayed you are in White dimming mode. Press the
UP and DOWN buttons to adjust intensity.
You can also daisy chain the power cords, this can only be
done with 20 fixtures. After 20 you will need to use a new
power outlet. They must be the same fixtures. DO NOT mix
fixtures.
Sound Active Mode:
In this mode the ELED Strip RGBW will react to sound, and chase
through the different programs.
1. Plug the fixture in and press the MODE button until “XXX ” is dis-
Download from Www.Somanuals.com. All Manuals Search And Download.
ELED Strip RGBW
4 Channel - DMX Values & Functions
Function
ELED Strip RGBW
Operating Instructions
Channel
Value
played. You can press the UP and DOWN buttons to pick one of the
20 preset programs to play in sound active mode. If you press the UP
button until “ALL ” is displayed the fixture will now run through each
preset program in sound active mode.
1
RED
0% - 100%
1 - 255
1 - 255
1 - 255
1 - 255
Note: When “ALL ” is displayed the fixture will rotate through all
programs.
2. The fixture will now change via sound.
2
3
4
GREEN
0% - 100%
BLUE
0% - 100%
DMX Mode:
Operating through a DMX controller gives the user the freedom to create
their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as spot lights. The ELED Strip RGBW
has 6 DMX modes: 4 Channel mode, 7 Channel mode, 8 Channel mode,
11 Channel mode, 16 Channel mode, and a 19 Channel mode. See
pages 10-16 for each modes’ DMX traits.
WHITE
0% - 100%
ELED Strip RGBW
7 Channel - DMX Values & Functions
Function
Channel
Value
1. This function will allow you to control each individual fixture’s traits
with a standard DMX 512 controller such as the Elation® Show
Designer™ or the Elation® DMX Operator™.
2. To run your fixture in DMX mode, plug in the fixture via the XLR con-
nections to any standard DMX controller. Select your desired DMX
mode, and then press the UP or DOWN buttons to adjust the DMX
address.
3. To run the 4 Channel Mode, press the MODE button until “XXX1”
is displayed. This is the DMX addressing for the 4 Channel Mode.
4. To run the 7 Channel Mode, press the MODE button until “XXX2”
is displayed. This is the DMX addressing for the 7 Channel Mode.
5. To run the 8 Channel Mode, press the MODE button until “XXX3”
is displayed. This is the DMX addressing for the 8 Channel Mode.
6. To run the 11 Channel Mode, press the MODE button until “XXX4”
is displayed. This is the DMX addressing for the 11 Channel
Mode.
1
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
WHITE
0% - 100%
1 - 255
1 - 255
1 - 255
1 - 255
2
3
4
5
COLOR MACROS
OFF
0
1 - 7
8 - 15
BASTARD AMBER
MEDIUM AMBER
PALE AMBER GOLD
GALLO GOLD
GOLDEN AMBER
LIGHT RED
MEDIUM RED
MEDIUM PINK
BROADWAY PINK
FOLLIES PINK
LIGHT LAVENDER
16 - 23
24 - 31
32 - 39
40 - 47
48 - 55
56 - 63
64 - 71
72 - 79
80 - 87
7. To run the 16 Channel Mode, press the MODE button until “XXX5”
is displayed. This is the DMX addressing for the 16 Channel
Mode.
8. To run the 19 Channel Mode, press the MODE button until “XXX6”
is displayed. This is the DMX addressing for the 19 Channel
Mode.
9. Please see pages 10-16 for DMX values and traits
Download from Www.Somanuals.com. All Manuals Search And Download.
ELED Strip RGBW
7 Channel - DMX Values & Functions
Function
ELED Strip RGBW
7 Channel - DMX Values & Functions
Function
Channel
Value
Channel
Value
5
COLOR MACROS CONT.
SPECIAL LAVENDER
LAVENDER
6
PROGRAMS CONT.
PROGRAM 12
88 - 95
96 - 103
132 - 143
144 - 155
156 - 167
168 - 179
180 - 191
192 - 203
204 - 215
216 - 227
228 - 239
240 - 255
1 - 255
PROGRAM 13
PROGRAM 14
PROGRAM 15
PROGRAM 16
PROGRAM 17
PROGRAM 18
PROGRAM 19
PROGRAM 20
104 - 111
112 - 119
120 - 127
128 - 135
136 - 143
144 - 151
152 - 159
160 - 167
168 - 175
176 - 183
184 - 191
192 - 199
200 - 207
208 - 215
216 - 223
224 - 231
232 - 239
240 - 247
248 - 255
INDIGO
HEMSLEY BLUE
TIPTON BLUE
LIGHT STEEL BLUE
LIGHT SKY BLUE
SKY BLUE
BRILLIANT BLUE
LIGHT GREEN BLUE
BRIGHT BLUE
PRIMARY BLUE
CONGO BLUE
PALE YELLOW GREEN
MOSS GREEN
PRIMARY GREEN
DOUBLE CTB
FULL CTB
SOUND ACTIVE
MAIN DIMMER 0% - 100%
7
ELED Strip RGBW
8 Channel - DMX Values & Functions
Function
Channel
Value
1
RED (RIGHT HALF SIDE)
0% - 100%
GREEN (RIGHT HALF SIDE)
0% - 100%
BLUE (RIGHT HALF SIDE)
0% - 100%
WHITE (RIGHT HALF SIDE)
0% - 100%
RED (LEFT HALF SIDE)
0% - 100%
GREEN (LEFT HALF SIDE)
0% - 100%
BLUE (LEFT HALF SIDE)
0% - 100%
WHITE (LEFT HALF SIDE)
0% - 100%
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
2
3
4
5
6
7
8
HALF CTB
DARK BLUE
WHITE
PROGRAMS
PROGRAM 1
PROGRAM 2
PROGRAM 3
PROGRAM 4
PROGRAM 5
PROGRAM 6
PROGRAM 7
PROGRAM 8
PROGRAM 9
PROGRAM 10
PROGRAM 11
6
1 - 11
12 - 23
24 - 35
36 - 47
48 - 59
60 - 71
72 - 83
84 - 95
96 - 107
108 - 119
120 - 131
Download from Www.Somanuals.com. All Manuals Search And Download.
ELED Strip RGBW
11 Channel - DMX Values & Functions
Function
ELED Strip RGBW
16 Channel - DMX Values & Functions
Function
Channel
Value
Channel
Value
1
RED (SECTION ONE)
0% - 100%
GREEN (SECTION ONE)
0% - 100%
BLUE (SECTION ONE)
0% - 100%
WHITE (SECTION ONE)
0% - 100%
RED (SECTION TWO)
0% - 100%
GREEN (SECTION TWO)
0% - 100%
BLUE (SECTION TWO)
0% - 100%
WHITE (SECTION TWO)
0% - 100%
RED (SECTION THREE)
0% - 100%
GREEN (SECTION THREE)
0% - 100%
BLUE (SECTION THREE)
0% - 100%
WHITE (SECTION THREE)
0% - 100%
RED (SECTION FOUR)
0% - 100%
GREEN (SECTION FOUR)
0% - 100%
BLUE (SECTION FOUR)
0% - 100%
WHITE (SECTION FOUR)
0% - 100%
1
RED (RIGHT HALF SIDE)
0% - 100%
GREEN (RIGHT HALF SIDE)
0% - 100%
BLUE (RIGHT HALF SIDE)
0% - 100%
WHITE (RIGHT HALF SIDE)
0% - 100%
RED (LEFT HALF SIDE)
0% - 100%
GREEN (LEFT HALF SIDE)
0% - 100%
BLUE (LEFT HALF SIDE)
0% - 100%
WHITE (LEFT HALF SIDE)
0% - 100%
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
2
3
2
3
4
5
6
7
8
9
4
5
6
7
8
9
PLEASE SEE DMX TRAITS AND
VALUES OF CHANNEL 5 OF
7 CHANNEL MODE
PLEASE SEE DMX TRAITS AND
VALUES OF CHANNEL 6 OF
7 CHANNEL MODE
MAIN DIMMER 0% - 100%
10
11
12
13
14
15
16
10
11
1 - 255
Please see page 16 for a diagram of the fixture and section
setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
ELED Strip RGBW
19 Channel - DMX Values & Functions
Function
ELED Strip RGBW
19 Channel - DMX Values & Functions
Function
Channel
Value
Channel
Value
1
RED (SECTION ONE)
0% - 100%
GREEN (SECTION ONE)
0% - 100%
BLUE (SECTION ONE)
0% - 100%
WHITE (SECTION ONE)
0% - 100%
RED (SECTION TWO)
0% - 100%
GREEN (SECTION TWO)
0% - 100%
BLUE (SECTION TWO)
0% - 100%
WHITE (SECTION TWO)
0% - 100%
RED (SECTION THREE)
0% - 100%
GREEN (SECTION THREE)
0% - 100%
BLUE (SECTION THREE)
0% - 100%
WHITE (SECTION THREE)
0% - 100%
RED (SECTION FOUR)
0% - 100%
GREEN (SECTION FOUR)
0% - 100%
BLUE (SECTION FOUR)
0% - 100%
WHITE (SECTION FOUR)
0% - 100%
17
PLEASE SEE DMX TRAITS AND
VALUES OF CHANNEL 5 OF
7 CHANNEL MODE
PLEASE SEE DMX TRAITS AND
VALUES OF CHANNEL 6 OF
7 CHANNEL MODE
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
1 - 255
2
3
18
19
4
1 - 255
MAIN DIMMER 0% - 100%
Please see below for a diagram of the fixture and section setup.
5
6
ELED Strip RGBW
Section 4 Section 3
Diagram
Section 1
Section 2
7
8
9
Note: The power cord is located behind Section 4.
ELED Strip RGBW
Photometrics
10
11
12
13
14
15
16
1027
430
LUX
220
RED
1360
590
LUX
300
GREEN
4
3
4
3
2
2
1
0
1
2
3
4
1
0
1
40 DEGREE
40 DEGREE
2
3
4
1
2
3
Distance (meter)
1
2
3
Distance (meter)
L*W (meter)
2.6*0.68
2.3*0.52
1.9*0.3
L*W (meter)
2.6*0.68
2.3*0.52
1.9*0.3
121
50
LUX
30
BLUE
3440
1460
760 LUX
WHITE
4
3
4
3
2
2
1
0
1
2
3
4
1
0
1
40 DEGREE
40 DEGREE
2
3
4
1
2
3
Distance (meter)
L*W (meter)
2.6*0.68
1
1.9*0.3
2
3
Distance (meter)
2.3*0.52
1.9*0.3
L*W (meter)
2.3*0.52
2.6*0.68
Download from Www.Somanuals.com. All Manuals Search And Download.
ELED Strip RGBW
Fuse Replacement
ELED Strip RGBW
Warranty
2-YEAR LIMITED WARRANTY
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry out
the fuse holder. Remove the bad fuse and replace with a new one. The
fuse holder also has a holder for a spare fuse.
A. Elation Professionals® hereby warrants, to the original purchaser, Elation Profes-
sionals® products to be free of manufacturing defects in material and workmanship
for a period of two years (730 days) from the date of purchase. This warranty shall be
valid only if the product is purchased within the United States of America, including
possessions and territories. It is the owner’s responsibility to establish the date and
place of purchase by acceptable evidence, at the time service is sought.
ELED Strip RGBW
Trouble Shooting
B. For warranty service, send the product only to the Elation Professionals® factory.
All shipping charges must be pre-paid. If the requested repairs or service (including
parts replacement) are within the terms of this warranty, Elation Professionals® will
pay return shipping charges only to a designated point within the United States. If the
entire instrument is sent, it must be shipped in its original package. No accessories
should be shipped with the product. If any accessories are shipped with the product,
Elation Professionals® shall have no liability whatsoever for loss of or damage to any
such accessories, nor for the safe return thereof.
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
C. This warranty is void if the serial number has been altered or removed; if the prod-
uct is modified in any manner which Elation Professionals® concludes, after inspec-
tion, affects the reliability of the product; if the product has been repaired or serviced
by anyone other than the Elation Professionals® factory unless prior written authori-
zation was issued to purchaser by Elation Professionals®; if the product is damaged
because not properly maintained as set forth in the instruction manual.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that you are in Sound Active mode.
D. This is not a service contract, and this warranty does not include maintenance,
cleaning or periodic check-up. During the period specified above, Elation Profession-
als® will replace defective parts at its expense, and will absorb all expenses for war-
ranty service and repair labor by reason of defects in material or workmanship. The
sole responsibility of Elation Professionals® under this warranty shall be limited to the
repair of the product, or replacement thereof, including parts, at the sole discretion of
Elation Professionals®. All products covered by this warranty were manufactured after
January 1, 1990, and bear identifying marks to that effect.
ELED Strip RGBW
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
E. Elation Professionals® reserves the right to make changes in design and/or
improvements upon its products without any obligation to include these changes in
any products theretofore manufactured.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
F. No warranty, whether expressed or implied, is given or made with respect to any
accessory supplied with products described above. Except to the extent prohibited
by applicable law, all implied warranties made by Elation Professionals® in connec-
tion with this product, including warranties of merchantability or fitness, are limited in
duration to the warranty period set forth above. And no warranties, whether expressed
or implied, including warranties of merchantability or fitness, shall apply to this prod-
uct after said period has expired. The consumer’s and or Dealer’s sole remedy shall
be such repair or replacement as is expressly provided above; and under no circum-
stances shall Elation Professionals® be liable for any loss or damage, direct or conse-
quential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to Elation Professionals®
Products and supersedes all prior warranties and written descriptions of warranty
terms and conditions heretofore published.
Download from Www.Somanuals.com. All Manuals Search And Download.
ELED Strip RGBW
Specifications
ELED Strip RGBW™
Model:
SPECIFICATIONS:
Working Position:
Voltage:
Power Consumption:
Fuse:
Any safe working position
100V ~ 240V/47~63Hz
75W
3.15 Amp
Weight:
10.5 lbs./ 4.74Kgs.
Dimensions:
42.25” (L) x 7.5” (W) x 6.5” (H)
1070 x 185 x 160mm
Colors:
LEDs:
RGB + W Color Mixing
64 LED’s ~ 64W LED’s (16 Red,
16 Blue, 16 Green, & 16 White)
6 DMX Modes: 4 Channel Mode,
7 Channel Mode, 8 Channel
Mode, 11 Channel Mode, 16 Chan-
nel Mode, & 19 Channel Mode
2 Year (730 days)
DMX Channels:
Warranty:
Please Note: Specifications and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.
©Elation Professionals®
A Division of the AmericanDJ® Group of Companies
World Headquarters:
6122 S. Eastern Ave. Los Angeles, CA 90040 USA
Tel: 323-582-3322 Fax: 323-582-3311
Download from Www.Somanuals.com. All Manuals Search And Download.
|