Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
DWL-AG132 Install Guide
Installing
the Drive
rs
Do NOT install the DWL-AG132 Wireless AG USB Adapter into your
computer before installing the driver software from the D-Link CD!
The step-by-step instructions that follow are shown in Windows XP. The
steps and screens are similar for the other Windows operating systems.
®
Turn on the computer and insert the D-Link AirPremier AG
DWL-AG132 Driver CD in the CD-ROM drive. The installation Wizard will
automatically appear.
Click Install Drivers
If the Installation Wizard does not
automatically start on your computer,
type “D:\Drivers\setup.exe.” If the
Wizard does start, proceed to the next
screen.
Click Next
Click Next
3
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
DWL-AG132 Install Guide
Installing th
e Drivers (c
ontinued)
Click Next
Click ‘Yes, I want to restart
my computer now.’
Click Finish
You have completed the installation of the drivers!
4
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DWL-AG132
DWL-AG132 Install Guide
L-AG132
Link/Power LED
Connecti
ng the DW
Link - indicates that
the DWL-AG132 is
properly installed.
Activity - blinks
when data is being
transmittedthroughthe
wireless connection.
USB Port - used to
connect the DWL-
A G 1 3 2 t o y o u r
computer.
Remove the protective covering from the DWL-AG132.
Begin by pressing
down on the cover
with your thumb.
Pull the cover away from
the DWL-AG132.
Insert the DWL-AG132 into
an available USB port on
your computer.
Optional: If desired or needed, attach
the cradle between the DWL-AG132
and your computer.
5
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Found New Hardware Wizard
DWL-AG132 Install Guide
The Foun
d New Ha
rdware W
izard
After connecting the DWL-AG132, the Found New Hardware Wizard
(Windows XP) screen will appear:
Select Install the
software automatically
(Recommended).
Click Next
Click Continue Anyway.
6
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Found New Hardware Wizard
DWL-AG132 InstallGuide
Select Install the
software automatically
(Recommended).
Click Next
Click Continue Anyway.
D-Link AirPremier AG DWL-AG132 USB Adapter
Click Finish to complete
the installation.
7
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Installation is Complete!
DWL-AG132 InstallGuide
Your Inst
allation i
s Comple
te!
After completing the Found New Hardware Wizard, the D-Link AirPremier AG
DWL-AG132 Configuration Utility will automatically start and the utility icon
will appear in the bottom right hand corner of the desktop screen (system
tray). If this icon appears GREEN, then you have successfully installed
the DWL-AG132, are connected to a wireless network, and are ready
to communicate!
Iftheutilityicondoesnotappear,
double-click the shortcut icon
that has appeared on your
desktop.
Double-click the utility icon to
use the configuration utility.
8
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG132 Install Guide
Appendix A
Using the
Utility in
Windows
XP
For Windows XP, if you wish to use the AirPremier AG utility, please do the
following:
Click the XP networking
icon to use the Zero
Configuration Wireless
Click Advanced.
Uncheck Use Windows
to configure my
wireless network
settings.
Click OK.
9
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG132 Install Guide
Appendix B
Using the
AirPremi
er AG Uti
lity
Status: Displays the MAC Address of the access point that is associated with
the DWL-AG132.
SSID: Displays the Service Set Indentifier assigned to the wireless
network.
Frequency: Displays the current frequency used by the adapter.
Wireless Mode: Displays the wireless mode. The default is Infrastructure.
Encryption: Displays whether Encryption is enabled or disabled.
Connection Info: Displays the adapter’s connectivity to the network.
Tx Rate: Displays the current data transmission rate.
10
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG132 Install Guide
AppendixB
Using the A
irPremier AG
Utility - Link
Info
(continued)
Channel: Displays the channel information. By default, the channel is set to 6
and selection is automatically determined by the
DWL-AG132.
Signal Strength: Represents the wireless signal between
the access point and the DWL-AG132. The percentage coincides with the
graphical bar.
Packet Count: Graphically displays the statistics of data transmitted and
received.
11
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG132 Install Guide
Appendix B
Using the A
irPremier AG
Utility -
Configuratio
n
SSID: The Service Set Identifier is the name assigned to the wireless network.
The factory SSID setting is set to default. Make changes here to match the
SSID on existing wireless router or access point.
Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is
used for peer-to-peer networking.
Data Encryption: The default setting is set to Disabled. The adapter supports
WEP ad WPA, when encryption is enabled.
Authentication: Allows you to specify the authentication mode for the network.
The default setting is set to Open Authentication.
12
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG132 Install Guide
AppendixB
Using the A
irPremier AG
Utility -
)
Configuratio
n (continued
Key Length: When encryption is enabled, you will have the option to specify
the level and key format of the encryption used. Select the appropriate Key
Index: 1-4, and enter ASCII or hexadecimal digits in the appropriate field.
IEEE 802.1x: When encryption is enabled, you will have the option to specify
if you wish to use 802.1x authentication.
13
Download from Www.Somanuals.com. All Manuals SDea-rLchinAkndSDyoswtnelomads. , Inc.
DWL-AG132 Install Guide
Appendix C
IP Address C
onfiguration
To connect to a network, make sure the
proper network settings are configured
for the DWL-AG132.
For MICROSOFT WINDOWS XP:
Go to Start > right-click on My Network
Places > select Properties > double-
click on the network connection
associated with the DWL-AG132.
Click Internet Protocol (TCP/IP)
Click Properties
Dynamic IP address setup
Used when a DHCP server is available on the local network. (e.g., a Router).
Select Obtain an IP address
automatically (if the wireless
router or access point has DHCP
server enabled).
Select Obtain DNS server address
automatically.
Click OK
14
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG132 Install Guide
AppendixC
IP Address C
onfiguration
(continued)
Static IP address setup
Used when a DHCP server is not available on the local network.
Select Use the following IP
address
IP address: 192.168.0.28
Subnet Mask: 255.255.255.0
Input a static IP address in the same
range as the wireless router or access
point.
Click OK
For WINDOWS 2000:
Go to Start > Settings > Network and
Dial-Up connections >
double-
click on the Local Area Connection
associated with the DWL-AG132 >
select Properties.
Click Internet Protocol
(TCP/IP).
Click Properties.
15
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG132 Install Guide
Appendix C
IP Address C
onfiguration
Dynamic IP address setup
(continued)
Used when a DHCP server is available on the local network. (e.g., a Router).
Select Obtain an IP address
automatically (if the wireless
router or access point has DHCP
server enabled).
Select Obtain DNS server address
automatically.
Click OK
Static IP address setup
Used when a DHCP server is not available on the local network.
Select Use the following IP
address
IP address: 192.168.0.28
Subnet Mask: 255.255.255.0
Input a static IP address in the same
range as the wireless router or access
point.
Click OK
D-Link Systems, Inc.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG132 Install Guide
Contacting Technical Support
Technical Support
D-Link’s website contains
D-Link products.
the latest user documentation
and software updates
for
D-Link provides free technical
support for customers
within the United States
and
Canada for the duration of the product’
s warranty period.
U.S. and Canadian cus
website or by phone.
tomers can contact D-
Link Technical Suppor
t through our
United States
Telephone
(877) 453-5465
Twenty four hours a day
, seven days a week.
World Wide Web
E-mail
Canada
Telephone
(800) 361-5265
Monday through Friday
, 7:30am to 12:00am EST
.
World Wide Web
E-mail
Version 1.0
Revised 02/11/05
©2005 D-Link Systems, Inc. All rights r
eserved. Trademarks are the pr
operty of their respective holders. Softwar
e and
specifications subject to change without notice.
17
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
DWL-AG132 Install Guide
Notes
D-Link Systems, Inc.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG700AP Install Guide
Notes
D-Link Systems, Inc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DWL-AG700AP Install Guide
Notes
Notes
20
D-Link Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|