PERSONAL CD PLAYER WITH
ANTI-SKIP PROTECTION
OWNER'S MANUAL
MODEL: CD266
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
INFORMATION:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
• Do not open the CD compartment while the CD is rotating.
• Always keep the CD compartment closed when not in use.
• Keep all foreign objects out of the CD compartment.
• Place the unit on a stable surface.
• Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters.
• On top of other stereo equipment that radiates too much
heat.
• Placed lacking ventilation or dusty places.
• Places subject to constant vibration.
• Humid or moist places.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear Customer:
Selecting fine audio equipment such as the unit you've just purchased is only the start of
your musical enjoyment. Now it's time to consider how you can maximize the fun and excite-
ment your equipment offers. This manufacturer and the Electronic Industries Association's
Consumer Electronics Group want you to get the most out of your equipment by playing it at
a safe level. One that lets the sound come through loud and clear without annoying blaring
or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of
sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe elvel BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distor-
tion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Association's Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at
two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CON-
STANT EXPOSURE:
90
Subway, motercycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Fonndation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
3
11
9
2
15
1
12
7
13
14
10
6
8
4
5
1. Display
8. Phones Jack
(Side of Unit)
9. SKIP UP Button
10. SKIP DOWN Button
11. STOP ( ) Button
12. MODE Button
2. PROGRAM Button
3. DC 4.5V Jack
(Side of Unit)
4. CD Compartment
5. CD Door Open Switch
6. Line Out Jack
(Side of Unit)
13. VOLUME UP
14. VOLUME DOWN
7. Play/Pause
(
)/Power on Button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCES
This CD player requires either two (2) "AA" batteries (not included)
or the AC adapter (not included).
BATTERY INSTALLATION
The low battery indicator will light in the dis-
play when batteries are low (when using
battery power).
1. Open the battery compartment door on
the bottom of the unit by sliding it out
and then lifting it. To prevent the pos-
sibility of losing the cover, it cannot
be removed.
2.
Insert two (2) "AA" batteries (not included) according to the
polarity diagram inside the battery compartment. Alkaline bat-
teries are recommended for the longest playing time.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or
old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not
included) to an AC outlet having 120V, 60Hz AC only. Plug the small
end into the DC 4.5V jack on the side of the unit and connect the
other end into the AC outlet. The batteries are automatically dis-
connected when the AC adapter is used.
DC 4.5V, 600 mA
5
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCES (CONTINUED)
NOTES:
•
Please read the battery instructions that came with the
batteries.
•
IMPROTANT: Make sure to recycle rechargeable batteries at
the end of their useful life. Check with
your local waste officials for details
regarding recycling.
Audio Sound Through a Home Audio System
By using a home audio connection cable (not included), superb audio
sound can be heard through your home audio system. Before making
any connections, turn off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on
the side of the CD player and the amplifier's AUX or CD input jack.
(Do not connect it to the amplifier's PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away
from the TV or turn off the power to this unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Press the PLAY/PAUSE (
)/Power On button to turn the unit on.
To turn the unit off, press the STOP ( )/Power Off button twice.
The unit will automatically shut off if stopped (CD Standby) for 30
seconds.
TO INSERT AND PLAY A CD
This unit plays CD, CD-R and CD-RW discs.
Note: CD-R/CD-RW discs must be first be finalized.
Press the PLAY/PAUSE (
)/Power On button to turn the unit on.
Open the CD door by sliding the CD Door Open switch. Gently
press a disc, label side up, onto the spindle unit it locks in place.
Close the CD door; playback will begin automatically.
If in the Stop mode, press the PLAY/PAUSE (
)/Power On
button to begin playback; the current track and elapsed playing time
(CD information and folder will also appear.
Adjust the VOLUME control on the side of unit.
When the disc is through playing, it will stop. Press the STOP ( )/
Power Off button to stop the disc before it is finished. Press the
STOP ( )/Power Off button again to turn the unit off.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
CD PLAYBACK NOTES:
• When reocrding ("burn") CDs, make sure the session is "finalized",
or simply record ("burn") only one session. You can find more
information in your recorder's manual.
• This unit is capable of playing standard CDs or 3" singles; no
adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present al all,
"No Disc" will appear in the display.
• If a disc is not recorded properly, a disc error will occur and the
unit will not play back the CD.
• Playback will stop when you open the CD compartment, but it is
not recommended to open the compartment before the STOP ( )/
Power Off button is pressed.
• If there is no activity for 30 seconds, the unit will turn itself off to
save the batteries.
TO PAUSE A CD
During CD playback, if you wish to pause the disc momentarily,
press the PLAY/PAUSE (
)/Power On button. Playback stops
but the disc continues to spin and the elapsed time will blink.
Press the PLAY/PAUSE (
)/Power On button again to release
pause and resume playback. The sound and the elapsed time in
the display stops blinking.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
After you insert the disc into the CD player and the total number of
tracks appears on the display, you may press either the
Skip/Search
or
button to select a specific track for playback.
When the desired track number appears in the display, press the
PLAY/PAUSE ( )/Power On button. Playback will begin with the
track (or file) you selected.
FORWARD/REVERSE SKIP TRACK
During playback, press and release the Skip/Search
button
once to advance the player to the beginning of the next track. Press
the Skip/Search
button repeatedly to advance the player to
higher-numbered tracks.
HIGH-SPEED MUSIC SEARCH
During playback, depress and hold either the Skip/Search
or
button to move the player forward or backward within a track to
locate a specific musical passage. The player will move forward to
backward at high speed as long as the buttons are depressed.
When you release the Skip/Search
will resume.
button, normal playback
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
REPEAT PLAYBACK OF ONE TRACK
To repeat a single track, while in the Stop mode, press the
Skip/Search button to select the specific track that you wish
to repeat. Press the MODE button once, the Repeat 1 indicator will
appear in the display.
When the desired track number appears in the display, press the
PLAY/PAUSE (
)/Power On button to begin playback. The
specific track you selected will be repeated continuously.
To cancel repeat playback of the track
1. Press the STOP ( )/Power Off button to stop playback; the
selected Repeated indicator will disappear from the display.
INTRO PLAYBACK (Will play the first 10 seconds of each track)
While in the Stop mode, press the MODE button 3 times; "INTRO"
will appear in the display.
Press the PLAY/PAUSE (
)/Power On button to begin intro
playback. The first 10 seconds of all tracks on the disc will be
played in sequence.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO RANDOMLY PLAYBACK A CD
While in the Stop mode, press the MODE button 4 times; "RAND"
will appear in the display.
Press the PLAY/PAUSE (
)/Power On button to begin playback.
The unit will play all the tracks in random order. When all the tracks
have been played, the unit will stop. To cancel Random playback,
press the MODE button once to return to normal playback.
To cancel Intro or Random playback:
1. Press the STOP ( )/Power Off button to stop playback; the
selected indicator will disappear from the display.
TO PROGRAM THE MEMORY
Programming is the ability to preselect the order in which a series of
tracks will be played.
While in the Stop mode, press the PROG. Button. The "PROG" will
blink and "P-01" will appear in the display.
Select a track to be programmed using the Skip/Search
button.
or
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
Press the PROG. Button to memorize the track. Repeat steps 2 and
3 to program additional tracks.
Press the PLAY/PAUSE (
playback.
)/Power On button to begin program
NOTES ON PROGRAM PLAYBACK
•
To add a track to the program memory, simply press the PROG.
button repeatedly until the track appears and "PROG" blinks in
the display, then continue as per the steps 2 and 3 on the
previous page.
•
•
•
•
Press the STOP (
)/Power Off button to stop the program
before it is finished (the program memory will be kept).
Each file may be stored in the program memory as many times
as desired.
Yan can scroll through the program while it is playing using the
Skip/Search
or
button.
To clear Program memories, press the STOP ( )/Power Off
button twice to turn the unit off, or open the CD door.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
Caring for Compact Discs
• Treat the compact disc carefully. Handle the
compact disconly by its edges. Never allow
your fingers to come in contact with the shiny,
unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to
the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the compact disc. If necessary, use a
CD cleaning kit.
•
If a compact disc skips or gets stuck on a section of the compact disc, it is
probably dirty or damaged (scratched).
When cleaning the compact disc, wipe in straight lines from the center of the
compact discto the outer edge of the compact disc. Never wipe in circular
motions.
•
•
This unit is designed to play only compact discs bearing the
identification logo as shown here. Other discs may not
•
conform to the CD standard and may not play properly.
Compact Discs should be stored in their cases after each use to avoid damage.
Do not expose compact discs to direct sunlight, high humidity, high
temperatures or dust, etc.Prolonged exposure or extreme temperatures can
warp the compact disc.
•
•
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink, maydamage the surface.
•
Cleaning the Unit
To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as
other furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
•
•
•
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling for
service.
Symptom
Possible Cause
Solution
Replace batteries.
Unit will not turn on. Weak or dead batteries.
Batteries not inserted
correctly.
Insert correctly.
AC adapter not connected. Check AC adapter
connection.
CD compartment not closed. Close CD compartment
Disc will not play.
Disc inserted incorrectly.
Dirty or defective disc.
Moisture condensation on
disc.
Reinsert disc correctly.
Try another disc.
Wipe disc with soft cloth.
Headphone plug not inserted Reinsert headphone plug
No sound from
headphones.
correctly.
correctly.
VOLUME control set to
minimum.
Increase volume.
Weak batteries.
Defective disc.
Replace batteries.
Try another disc.
Dirty or defective disc.
Clean or replace disc.
Erratic playback.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
LINE OUT
Frequency Response
Tracking System
Laser Pick-up
20 to 20,000 Hz
1-beam laser
Semiconductor laser
D/A Conversion
8-times oversampling digital filter +1 bit DAC
POWER SOURCE
Batteries
3V DC, (2 "AA" size)
Input Voltage: AC 120V
Output Voltage: DC 4.5V, 600mA,
Positive Center
AC adaptor
Dimensions
Weight
5.5 (D) x 5.5 (W) x 1.25 (H) inches
0.5 lbs (w/o batteries)
Accessories
Headphones
15
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED PRODUCT WARRANTY
Audio Product
Telecom Product
TV
DVD Player
This quality product is warranted to be free from manufacturer’s defects in material and workman-ship,
provided that the unit is used under the normal operating conditions intended by the manufacturer.
Should you have any problem with this product, please and it is highly recommended to visit our website at
operating manuals and trouble shooting tips on our website which gives you the answer on most of the
questions you could have in operating the unit.
TERMS OF WARRANTY
C.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 1 year on
parts and 90 days on labor.
Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any items
placed in this product, whether due to any defect of the product, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), there are no other
warranties, conditions, representations or guarantees, express or implied, made or intended by C.I. or its
authorized distributors and all other warranties, conditions, representations or guarantees, including any
warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or
statue is hereby expressly excluded. Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service
Dept. (USA), shall not be responsible for any damages to persons or property, including the unit itself,
howsoever caused or any consequential damages arising from the malfunction of the unit and by the
purchase of the unit, the purchaser does hereby agree to indemnify and save harmless C.I. from any claim
for damages to persons or property caused by the unit.
TO OBTAIN REPAIRS UNDER THE TERMS OF THIS WARRANTY
1. The original purchaser must present a copy of the original bill of sale and the service warranty card.
2. Any alterations, abuse, misuse, battery corrosion or accidental damage voids the warranty.
3. The warranty does not cover cabinets and accessories.
4. No warranty or insurance contained or set out shall apply when damage or repair is caused by power
failure; damage in transit or when moving the unit; improper power supply; use for commercial or
industrial purposes; service calls resulting in customer education, etc.
5. The defective product should be taken or mailed to:
Canada
C.I. Service Dept.
315 Attwell Drive
U.S.A
C.I. Service Dept.
181 Cooper Avenue
Unit 104
Tonawanda, N.Y.
14150
Etobicoke, Ontario.
M9W 5C1
6. If mailing the product, the freight must be prepaid and a money order for $7.00 should be included
to cover the cost of insurance and the return of the product.
7. C.I. reserves the right to repair or replace the parts which have become defective.
Model No. ......................................... Date Purchased ................................ Serial No. ................................
Download from Www.Somanuals.com. All Manuals Search And Download.
|