™
Before using Shiny Styles™Iron:
STYLING WITH Shiny Styles Iron
give it volume and texture.
described in this manual. Do not use attachments
not recommended by the manufacturer.
IMPORTANT SAFETY
INSTRUCTIONS
1. Place unit on a firm surface for safety.
2. Select and change plates before heating unit.
NEVER CHANGE PLATES WHEN HOT!!! To
change plates, simply hold the side button down
as you slide the plates off the unit (diagram 1).
Replace desired plates by aligning the grooves on
the bottom of the plate with the unit. The plate
should click into place and be flush with the unit.
3. Plug unit in, allowing 20 - 25 minutes for opti-
mum heat.
1. Deep wave plates: Deep wave plates can be
used on the entire head or on small sections of
hair. Shiny Styles™ Iron works well on wavy
hair, giving it a more uniform glamorous look, and
on straight hair, giving it body and texture. Take
one small section of hair at a time, place it
between plates, and gently press the plates shut.
Always work from the roots toward the end of the
hair. Keep plates closed for 5 - 10 seconds.
Release that section of hair and reposition the
styler so that the next crimp falls in line with the
first.
4. Star imprint plate: First choose a spot where
you'd like to 'print' a star on your hair. A strand
near your face, or a pair – one on each side of
your face – or a strand of hair directly in the back
is a good spot, but use your imagination. One star
imprint makes a good 'shining impression', but if
you have hair long enough, several looks great.
Close the iron over the strand of hair to be
imprinted, hold for about 5-10 seconds and
release. Add a little gel or mousse to the strand
before or after you 'print' and the impression will
last longer. Spray helps too.
4. Never operate this appliance if it has a dam-
aged cord or plug, if it is not working properly,
or if it has been dropped, damaged, or dropped
into water. Return the appliance to an autho-
rized service center for examination and
repair.
5. Keep the cord away from heated surfaces.
6. Never use while sleeping.
7. Never drop or insert any object into any open-
ing or hose.
8. Do not use outdoors or operate where aerosol
(spray) products are being used or where oxygen
is being administered.
9. Do not use an extension cord with this appli-
ance.
10. This unit is hot when in use. Do not let heat-
ed surfaces touch eyes and bare skin.
11. Do not touch hot surfaces of the appliance. Use
handles or knobs.
This curling appliance is intended for household use.
Use on Alternating Current (60 hertz) only. Standard
curling appliances are designed to operate at 120
volts AC.
INSTRUCTIONS
When using electrical appliances, especially when
children are present, basic safety precautions
should always be followed, including the following:
This appliance has a polarized plug (one blade is
wider than the other). As a safety feature this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
READ ALL INSTRUCTIONS
BEFORE USING
4. Use Shiny Styles™Iron on dry hair. You can
use mousse, gel and other hair preparations
before or after using Shiny Styles™ Iron to
achieve the look you desire.
KEEP AWAY FROM WATER
DANGER – Any appliance is electrically live
2. Straight plates: The straightener is designed
to smooth unwanted curl or frizz, to shape and
straighten your hair in the latest stunning styles.
Take one small section of hair at a time. Pull the
hair downward and hold taut. Starting at the root,
run the straightener down the hair in one smooth
movement. Keep the strands of hair smooth while
you work, to avoid ridges.
Combinations: Mix and match shiny strands with
micro crimp strands and/or stars. Experiment with
different styles, using only one plate or a combi-
nation of different plates.
GENERAL INSTRUCTIONS
even when the switch is off.
To reduce the risk of death by electric shock:
1. Always “unplug it” immediately after using.
2. Do not use while bathing, or in a shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other
liquid.
5. If an appliance falls into water, “unplug it” imme-
diately. Do not reach into the water.
diagram 1
Push button and slide plate off unit.
Removable combs: Your straightening iron
includes two removable comb attachments. The nat-
ural boar and nylon bristle comb will help to provide
tension and guide your hair as you use the straight-
ening iron. To remove or attach the comb, turn unit
off and allow unit to cool. Hold unit firmly with one
hand; with your other hand, slide comb away from
the iron. When replacing the comb, align the comb
with the slot on the side of the iron and slide comb
into position. Make sure the comb securely locks into
position.
12. Do not place the heated unit directly on any
surface while it is hot or plugged in.
13. Never block the air openings of the appliance
or place it on a soft surface, such as a bed or
couch, where the air openings may be blocked.
Keep the air openings free of lint, hair, and the
like.
WARNING – To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in. Do not pull,
twist, or wrap line cord around appliance.
SAVE THESE
2. Close supervision is necessary when this
appliance is used by, on, or near children or indi-
viduals with certain disabilities.
3. Micro crimp plates: Similar to the deep
wave plate, the micro crimp plate can be used on
the entire head or on small sections of hair, to
INSTRUCTIONS
OPERATING
3. Use this appliance only for its intended use as
Align groove on plate.
Download from Www.Somanuals.com. All Manuals Search And Download.
|