BAS-311G
Direct Drive Programmable electronic pattern sewer
with cylinder bed 130mm×100mm
BAS-326G
Direct Drive Programmable electronic pattern sewer
with cylinder bed 220mm×100mm
BAS-326G-PS
Direct Drive Programmable electronic pattern sewer
with Perfect Stitch hook and cylinder bed 220mm×100mm
●
●
●
●
●
Sewing data is sewn faithfully and attractively
High maximum sewing speed
Economical operation with low power consumption
Work clamp lift amount can be adjusted easily from the operation panel
Easy-to-use programmer PD-3000 (optional product)
Download from Www.Somanuals.com. All Manuals Search And Download.
with Perfect Stitch hook
Direct Drive Programmable electronic pattern sewer with cylinder bed
220mm×100mm
BAS-326G-PS
Achieved Perfect stitch area covering more than
90% of the sewing direction while realizing
high quality sewing stitches.
Regardless of material, a superior stable
sewing stitch can be obtained;
Appealing stitches are here to stay.
Realizing amazing high quality stitches
Special hook for perfect stitch has been newly developed and it ensures
excellent thread tightening evenly. Uniform stitches and stable thread
tightening can be obtained as compared with hitch stitch even with the
change of sewing direction and material.
Wide-range perfect stitch area
Complete perfect stitch has been achieved in rectangular pattern stitching as BAS-326G with Perfect
Stitch covers its area at almost all sewing directions. Wide-range perfect stitch area contributes to
improve your product quality and spread your range of sewing products.
〈Usual model〉
〈BAS-326G-PS〉
Perfect Sticth
Complete perfect stitch
in all directions
Hitch Sticth
Perfect Sticth
Perfect Stitch
Realizing beautiful
perfect stitch with special hook
even with leather material
which can usually be
hitch stitch.
Download from Www.Somanuals.com. All Manuals Search And Download.
utiful seams can be produced even at high speeds.
wide range of applications while saving energy.
Easy programmer* with large color LCD
Easy programming
• Programs can be easily created in the same procedure as the
programmer of the previous model.
• A shape of pattern data can be checked while it is created.
• Comments can be added to the program. Also, horizontal and
vertical sizes are displayed so that programs of similar figures
can be identified.
Sewing data can be managed with programmer
Sewing data management is easy because sewing data image can
be displayed and sewing data can be copied and moved easily.
*optional product
PD-3000
Large-capacity memory capable of storing bulky data
Large-capacity memory (*512 programs, 500,000 stitches) is embedded
in the sewing machine so that a large quantity of data can be stored.
There is no need to read a program each time it has been changed.
A compact flash (CF) card has been adopted for handling a large amount
of data. Read and write speed is fast, which allows multiple data to be
copied or moved to other sewing machines or computers for data
management.
*The number of patterns and stitches which can be stored depends on the number of stitches
for each program.
Changing sewing pattern is simple
Work clamp can be replaced quickly and accurately
Simply by loosening the two screws, the work clamp
can be replaced quickly. It can also be installed
accurately by using the positioning pins.
Feed plate can be replaced accurately
When replacing the feed plate, stitch data can be easily
and accurately aligned with the feed plate by aligning the
Positioning pins
reference holes of the needle plate and the feed plate.
Work clamp lift amount can be set on operation panel (BAS-311G Motor-driven work clamp spec.)
As the work clamp operation is controlled by a pulse motor, the work
clamp lift amount can be set simply by entering a numeric value at the
operation panel without need of using tools. Furthermore, you can use
the user programs to set desired work clamp lift amount for each
program respectively. No need to adjust the amount at every change
of programs.
Download from Www.Somanuals.com. All Manuals Search And Download.
3 types of work clamp lowering operation
(BAS-311G Motor-driven work clamp spec.)
You can select desired work clamp lowering operation from three patterns by
changing memory switch settings.
Two-step lowering*:
The work clamp is lowered from the highest position to pause at an
intermediate position, then lowered to the lowest position. Quick and
accurate positioning of materials can be made with an optimal work clamp
height. The total cycle time can be reduced.
One-step lowering:
The work clamp is lowered from the highest position to the lowest position
at once. The quick pressing operation is suitable for occasions when
positioning materials with the work clamp is not necessary while it is
positioned with the feed plate beforehand.
Analog lowering:
Options
The work clamp is lowered in
direct proportion to the pedal
depression amount without
steps. You can lower it with
making subtle positioning of
materials.
●Needle cooler*
(SA5559101)
●Thread wiper set*
(Pneumatic type)
(SA5575101)
●Inner clamping device
(100 x 60)(SA7189101)
* The factory setting is two-step lowering.
●
Thread breakage detector
(SA5193101)
ÔTriple pedal foot switch
Simple adjustment
(SA6495101)
Pulley positioned in convenient location
●Sewing data
The pulley is positioned in the
convenient location on the
side of the sewing machine
arm. Needle drop and hook
timing can be checked easily.
programming software
PS-300B
* This device requires the optional
solenoid valve set.
Driver phase can be adjusted easily
The driver phase can be adjusted from the side without tilting the
sewing machine. This reduces time taken for the adjustment
and improves productivity when materials are changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
※01A-PS for heavy
BAS-311G-0
BAS-326G-0
-
（ ）
materials only
Application
Work clamp
Application
Work clamp
Hook
PS Perfect stitch hook
For heavy materials
1
Motor-driven
work clamp
For heavy materials
(#20 or similar thread)
Pneumatic
work clamp
S
A
1
2
3
A
(#20 or similar thread)
For medium materials
2
For medium materials
(#50 or similar thread)
Pneumatic
work clamp
(#50 or similar thread)
For seat belt
3
For seat belt
(#4 or similar thread)
(#4 or similar thread)
BAS-311G-01S
BAS-326G-01A
1
*
BAS-326G-PS
BAS-311G
BAS-326G
Sewing machine
Stitch form
Lock stitch pattern tacking sewing machine
Single needle lock stitch
2
*
Max. sewing speed
Sewing area (X_Y)
Feed mechanism
Stitch length
2,700sti/min
Max. 220 x 100 mm
Max.130 x 100 mm
Intermittent feed (pulse motor drive)
0.05 - 12.7mm
Max. number of stitches
Work clamp drive
20,000 stitches per pattern
Pulse motor drive / Pneumatic drive
-0□S: Max. 25 mm
-0□: Max. 30 mm
-0□S: Unit work clamp
-0□A: Separate work clamp
Pulse motor drive
Max. 30 mm
Work clamp lift amount
2-step work clamp
Separate work clamp
Height of stepping presser foot
Stepping presser foot stroke
Hook
19.5mm
22mm
2 - 4.5 mm, 4.5 - 10 mm or 0 (Factory setting:3mm)
Double-capacity shuttle hook (Standard capacity hook: Option)
Standard equipment
Double-capacity rotary hook
Thread wiper
Thread trimmer
Data storage media
Motor
Standard equipment
Flash memory (Sewing patterns can be added using CF card)
AC servo motor 550W
Machine head: Approx. 88 kg(BAS-311G/326G)・Approx.90kg(BAS-326G-PS),
Operation panel: Approx. 0.6 kg, Control box: 14.2 - 16.2 kg (depending on destination)
Single phase 100V / 220V, 3-phase 200V/220V/380V/400V 400VA
0.5Mpa 1.8 l/min
Weight
Power supply
Air pressure/consumption
*Thread counts are for reference. Please consult your local Brother sales office for details.
*1 BAS-326G-PS is for heavy materials only.
*2 When sewing at a sewing speed of 2,700 sti/min, set the stitch length to 4mm and under.
RoHS Compliant
BAS-311G/326G is compliant with the RoHS Directive
(the restriction of the use of certain hazardous
substances in electrical and electronic equipment)
which came into effect in the EU in July 2006.
Product specifications are subject to change for improvement without notice.
Please read instruction manual before using the machine for safety operation.
CHINA
BROTHER (CHINA) LTD.
+86-21-3133-2101
+852-3589-9040
HONG KONG BROTHER INTERNATIONAL (HK) LTD.
1-5, Kitajizoyama, Noda-cho, Kariya-shi, Aichi 448-0803, Japan.
ASIA
BROTHER INTERNATIONAL SINGAPORE PTE LTD.
+65-6536-8891
EUROPE
BROTHER INTERNATIONALE INDUSTRIEMASCHINEN G. m. b. H. +49-2822-6090
AFRICA,MIDDLE EAST
AMERICAS
BROTHER INTERNATIONAL CORPORATION
+1-908-704-1700
Brother Industries, Ltd. Machinery & Solution Company
Kariya and Minato plants acquired ISO 9001 and 14001 certifications.
To preserve the environment, this catalog was printed on ECF paper (Elemental Chlorine-Free) and using SOY INK.
Printed in Japan 2010.4. I5040882B Vol.4
|