HAND MIXER
OWNER’S MANUAL
Model EP552HA/EP552HS
120V., 60Hz., 255 Watts
EURO-PRO Operating LLC
U.S.: 94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Canada: 4400 Bois-Franc
St-Laurent, QC H4S 1A7
Tel. : 1 (800) 798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING & STORAGE
GETTING TO KNOW YOUR HAND MIXER
•
Ensure that the mixer is unplugged
•
To make cleaning easier, remove
and switched off before removing and
cleaning the accessories.
beaters and dough hooks and wash
right away after use. Do NOT use
scouring pads, harsh detergents
or abrasive cleaners to clean the
beaters or dough hooks. Dry with a
soft, clean cloth.
Push the cord rewind button while
holding the plug for the cord to
rewind.
•
•
Wash the beaters and dough hooks in
warm, soapy water or dishwasher.
Wipe the outside area of the hand
mixer with a damp cloth and polish
with a soft, dry cloth. NEVER
immerse the hand mixer, plug or
power cord into water or any other
liquid.
•
Caution: Do not pull with force on the
power cord or you will damage the
rewinding feature and void the warranty.
When rewinding, always hold the plug to
avoid cord whipping.
•
Wipe any excess food particles from
the power cord.
IMPORTANT INSTRUCTIONS
ALWAYS
NEVER
ALWAYS make sure that your hands are dry
before handling the plug or switching on the
appliance.
NEVER place your hand in the bowl while it is in
operation.
ALWAYS use the mixer on a dry, level surface.
NEVER use this appliance outdoors.
ALWAYS unplug unit from the electrical outlet
when not in use or when removing accessories
and before cleaning.
NEVER use this appliance for other than for
intended use. This appliance is for household use
only.
NEVER mix dry, thick or heavy mixture for more
than 30 seconds without turning off the hand
mixer and stirring the ingredients before
continuing.
ALWAYS remove the beaters or dough hooks
from the mixer before washing.
ALWAYS avoid contact with moving parts while
unit is in operation. Keep hands, hair, clothing as
well as other utensils away from beaters and
dough hooks during operation.
NEVER use harsh, abrasive or caustic cleansers
5. Cord Rewind Button
6. Beaters (2)
7. Dough Hooks (2)
8. Storage Bag (not shown)
1. Main Unit
2. Accessory Eject Button
3. Speed Selector
to clean this appliance.
NEVER allow children to use this appliance
unsupervised.
4. Hi/Lo Range Selector
NEVER leave this appliance unattended while in
use.
NEVER let the power cord to hang over the edge
of a table or counter, touch hot surface or
become knotted.
NEVER eject attachments with the unit operating.
Illustrations may differ from actual product.
Technical Specifications
Voltage:
Power:
120V., 60Hz.
255 Watts
5
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Read all the sections of this booklet and follow all the instructions carefully.
OPERATING INSTRUCTIONS
•
When you have inserted the desired
attachment, insert the plug into the
electrical outlet.
Pick up the mixer and use your thumb
to set the speed selector and the
Hi/Lo range selector to the setting that
you desire.
To Operate the Hand Mixer
OPERATING INSTRUCTIONS
•
Gently pull the power cord from the
main unit.
Before using your Bravetti Hand Mixer
for the first time, wash the beaters and
dough hooks in warm, sudsy water.
Rinse and dry thoroughly.
Warning: To avoid injury when inserting
or removing beaters or dough hooks
always set the speed selector on ”0" and
unplug the appliance.
Warning: The unit is designed for
intermittent use. The maximum operating
time on settings “1-3” in the "Lo" range is
10 minutes non-stop with beaters or
dough hooks. The maximum operating
time on settings “1-3” in the "Hi" range is
30 seconds non-stop with beaters or
dough hooks.
Dough Hooks:
•
Use for light doughs. Insert dough hooks
in the same way as beaters. See
installing instructions for beaters in
previous section. Always use both dough
hooks. Never try to work with one beater
and one dough hook at the same time.
Do not use dough hooks at low speeds
as this may cause motor to overheat.
When using dough hooks for heavy or
thick dough, use only high speed (3) from
the beginning to prevent the motor from
overheating (blocking).
Caution: Do not pull with force on the
power cord or you will damage the
rewinding feature and void the warranty.
When rewinding, always hold the plug to
avoid cord whipping.
Warning: The unit is designed for
intermittent use. The maximum operating
time on settings “1-3” in the "Lo" range is
10 minutes non-stop with beaters or
dough hooks. The maximum operating
time on settings “1-3” in the "Hi" range is
30 seconds non-stop with beaters or
dough hooks.
•
Before plugging in the unit, fit the
desired attachment required for the
mixing operation to be carried out.
Insert the beaters or the dough hooks
one at a time by pressing them gently
upwards until they are fully fitted and
you hear a click. Make sure that the
attachment with the locator ring is
inserted into the larger hole opening.
(See illustration below.)
•
•
•
•
•
We suggest that you begin at the
highest speed to prevent the motor
from blocking.
Ensure that the beaters are
completely free to move in your
mixture.
Return to "0" setting when you have
finished using the mixer or you wish
to stop.
To remove the attachments from
the mixer, press the accessory eject
button. This button only works when
the mixer is in the "0” speed setting.
To rewind the power cord, push the
cord rewind button.
Large Opening
Locator
Ring
Beaters, Dough Hooks:
Large Opening
Select the attachment according to the
type of mixing required. Make sure that
the mixer is unplugged from power
source and speed selector is set on ”0"
before inserting or removing beaters or
dough hooks.
Locator
Ring
Bottom View
Beaters:
•
Warning: Never operate the appliance
without all the parts in place. Make sure
that all parts are properly assembled
before turning on the unit.
Use for liquid mixes such as creams,
egg-whites, confectionery doughs, etc.
Insert stem end of beaters (one at a time)
into the openings in the mixer. Insert the
beater with the locator ring in the larger
of the two holes. The ring on the beater
must sit below the surface of the mixer
housing. To ease the inserting of the
beaters, a slight twisting motion will aid in
engaging the beater drive tabs. Install the
second beater in the same manner as
above.
Caution: When rewinding, always hold
the plug to avoid cord whipping.
Bottom View
SPEED SETTINGS
HI/LO RANGE SETTINGS
SPEED SELECTOR
"LO"
"HI"
"0"
Off
Off
Locator
Ring
"1"
"2"
Lowest
Low
High-Middle
High
Beater
"3"
Low-Middle
Highest
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|