Belkin Network Router F1P1210ENAU User Manual

Self Help Guide  
Restore your Belkin VoIP unit to the factory default settings  
This process may take up to 1-2 minutes  
IMPORTANT!  
Step 1 Open your web browser (Internet Explorer, Mozilla FireFox, Safari etc)  
Before you begin  
Step 2 In the Address Bar, delete any text and type in 10.1.1.1 or  
Click Here to open the page directly  
You will need:  
• Belkin VoIP unit  
• Power cable  
• Network cable  
Hardware check:  
• Your computer is switched on  
• The VoIP unit is switched on  
(power switch at rear)  
• Network cable connected  
from computer to the VoIP unit  
Step 3 Type in your current password (default password = admin)  
then click LOGIN  
Step 4 On the left hand side of the screen click Advanced Setup  
F1P1241EGau  
Step 5 You will now be presented with more options in the menu on the left.  
Click Tools then choose Configuration Tools  
F1P1241ENau  
Step 6 Left click on Restore router to Factory Defaults and click Next  
Step 7 Click Apply, the VoIP unit will now restore to factory defaults  
F1P1210ENau  
and reboot.  
TSG xxx004a-rev1  
Page 1 of 1  
If you still require further assistance  
contact Belkin Technical Support  
Call: 1300 554 780  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Best Ventilation Hood K7788 User Manual
Black Decker Saw JS680V User Manual
Bosch Appliances Security Camera VG5 800 SERIES User Manual
Bosch Appliances Security Camera VJR SERIES User Manual
Briggs Stratton Portable Generator 76001 User Manual
Bushnell Home Security System 78 8000 User Manual
Cadillac Automobile 2011 CTS Coupe User Manual
Calphalon Slow Cooker HE700SC User Manual
Canon Security Camera VB M600D User Manual
Carrier Furnace 58DXC User Manual