R
EN
FR
ES
FM/AM CD Receiver
CDA-9835
CDA-9833
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
Phone 03-9769-0000
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
Phone 01-48638989
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 02-484781
ALPINE ELECTRONICS OF CANADA, INC.
7300 Warden Ave., Suite 203, Markham,
Ontario L3R 9Z6, Canada
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
Phone 1-800-ALPINE-1 (1-800-257-4631)
Dalian Ikemiya Printing Co., LTD.
4 Jin Zhou Street Economic & Technical Development
Dalian, China
Designed by ALPINE Japan
Printed in China (Y)
68P04190K16-O
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Contents
Operating Instructions
Scanning Programs ......................................... 12
Searching from CD Text ................................. 12
File/Folder Name Search
WARNING
(concerning MP3/WMA) ............................ 12
Quick Search ................................................... 12
About MP3/WMA .......................................... 12
WARNING..................................................3
CAUTION ...................................................3
PRECAUTIONS .........................................3
Sound Setting
Adjusting Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat...... 14
Equalizer Presets ............................................. 14
Adjusting and Storing the Equalizer Curve .... 14
Recalling the Stored Equalizer Curve ............. 15
About the Crossover ....................................... 15
Adjusting and Storing the Crossover
Getting Started
Turning Power On and Off ............................... 6
Initial System Start-Up ..................................... 6
Setting the Time and Calendar
(CDA-9835 only)........................................... 6
Setting Time (CDA-9833 only) ........................ 6
Opening and Closing the Movable Display ...... 6
Display Tilt Adjustment .................................... 7
Adjusting Volume ............................................. 7
Lowering Volume Quickly ................................ 7
Changing the Display Type
Settings ........................................................ 16
Recalling the Stored Crossover Settings ......... 16
About Time Correction ................................... 17
Bass Focus ...................................................... 17
Adjusting and Storing the Time Correction .... 19
Recalling the Stored Time Correction
(CDA-9833 only)........................................... 7
Switching the Display modes
Settings ........................................................ 19
Setting the MX Mode ..................................... 19
(CDA-9835 only)........................................... 7
Detaching and Attaching the Front Panel ......... 7
Other Functions
Radio
Displaying the Title/Text................................. 20
Titling Discs/Stations ...................................... 21
Erasing Disc Title/Station Title ....................... 22
Displaying Time.............................................. 22
Blackout Mode On and Off............................. 22
Setting an Amplifier Link ............................... 22
Displaying the External Amplifier
Changing the Radio Frequencies for each
Country .......................................................... 8
Listening to Radio............................................. 8
Manual Storing of Station Presets .................... 8
Automatic Memory of Station Presets .............. 8
Tuning to Preset Stations .................................. 8
Station Title Search Function............................ 9
Frequency Search Function............................... 9
Information .................................................. 23
Setting the Multicolor Illumination ................ 23
Changing the Lighting Color of
CD/MP3/WMA
Playback ............................................................ 9
Playing back a Playlist .................................... 10
Repeat Play ..................................................... 11
M.I.X. (Random Play) .................................... 11
All the Buttons............................................. 23
Verifying the Software Version ....................... 23
Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and /or other countries.
1-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
i-Personalize™ Operation
Receiving Stored XM Channels...................... 28
Channel/Category Search Function ................ 28
Quick Search Function.................................... 28
Changing the Display...................................... 29
Setting the Tuning Method ............................. 29
Setting the Auxiliary Data Field Display ........ 29
About i-Personalize™..................................... 24
Data Downloading .......................................... 24
SETUP
Sound Customizing
Switching the Tuner Mode .............................. 25
Subwoofer On and Off .................................... 25
Setting the Subwoofer Output......................... 25
Setting the Response Slope for the High
Range Speaker (TW SETUP) ...................... 25
Sound (Beep) Guide Function ........................ 25
Visual Customizing
MobileHub™ Link Operation
(Optional)
About MobileHub™ Link............................... 30
Telephone Mode ON/OFF .............................. 30
Incoming Calls ................................................ 30
Setting the Automatic Calling ......................... 30
Calling............................................................. 31
SMS (Short Message Service) Operation ....... 31
Dimmer Control .............................................. 26
Scroll Setting................................................... 26
Switching the Character Font
Changer (Optional)
(CDA-9833 only)......................................... 26
Adjusting Display Contrast
Controlling CD Changer (Optional) ............... 32
Playing MP3 Files with the CD Changer
(Optional) .................................................... 32
Multi-Changer Selection (Optional) ............... 32
(CDA-9833 only)......................................... 26
Opening Message ON/OFF Setting
(CDA-9835 only)......................................... 26
Switching the Animation Display type
(CDA-9835 only)......................................... 26
Setting of Calendar Display Pattern Switching
(CDA-9835 only)......................................... 26
Demonstration................................................. 26
MP3/WMA
Remote Control
Controls on Remote Control ........................... 33
Operating the Audio Processor ....................... 33
Battery Replacement ....................................... 34
Information
In Case of Difficulty ....................................... 34
Specifications .................................................. 37
Playing MP3/WMA Data................................ 26
External Device
Turning Mute Mode On/Off............................ 26
Setting the AUX Mode (V-Link)..................... 26
Connecting to an External Amplifier .............. 27
Setting the Temperature Display for the
External Amplifier ....................................... 27
Setting the Tone Defeat for External Devices... 27
Installation and Connections
Warning ........................................................... 38
Caution ............................................................ 38
Precautions ...................................................... 38
Installation ...................................................... 39
Connections .................................................... 40
XM Radio (Optional)
Receiving XM Channels with the
LIMITED WARRANTY
XM Receiver (Optional) .............................. 27
Checking the XM Radio ID Number .............. 28
Storing XM Channel Presets........................... 28
2-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
WARNING
CAUTION
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
WARNING
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.
Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.
INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+
and –) as instructed. Rupture or chemical leakage from the
battery may cause fire or personal injury.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
PRECAUTIONS
Temperature
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player
and wait about an hour for the moisture to evaporate.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs.
Playing a bad disc could severely damage the playback
mechanism.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
Maintenance
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS
IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
3-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Location
Make sure the CDA-9835/CDA-9833 will not be installed in a
location subjected to:
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For
more severe stains, please dampen the cloth with water only.
Anything else has the chance of dissolving the paint or damaging
the plastic.
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Never Attempt the Following
Correct Handling
Do not grip or pull out the disc while it is being pulled back into
the player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power
is off.
Do not drop the disc while handling. Hold the disc so you will
not leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
CORRECT
INCORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Your player will automatically eject any disc that is inserted
incorrectly. If the player continues to eject a correctly inserted
disc, push the RESET switch with a pointed object such as a
ballpoint pen.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause
the CD player to skip. For routine cleaning, wipe the playing
surface with a clean, soft cloth from the center of the disc to the
outer edge. If the surface is heavily soiled, dampen a clean, soft
cloth in a solution of mild neutral detergent before cleaning the
disc.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
New Discs
As a protective measure to prevent the CD from jamming, the CD
player will automatically eject discs with irregular surfaces or
inserted incorrectly. When a new disc is inserted into the player
and ejected after initial loading, using your finger, feel around the
inside of the center hole and outside edge of the disc. If you feel
any small bumps or irregularities, this could inhibit proper
loading of the disc. To remove the bumps, rub the inside edge of
the hole and outside edge of the disc with a ballpoint pen or other
such instrument, then insert the disc again.
Disc Accessories
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the disc to
be out of standard specifications and may create operational
problems. We recommend not using these accessories on discs
played in Alpine CD players.
Center Hole
Center Hole
New
Disc
Bumps
Outside
(Bumps)
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
Transparent Sheet
Disc Stabilizer
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
4-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long
time. Never expose the disc to direct sunlight. Heat
and humidity may damage the CD and you may not be
able to play it again.
To customers using CD-R/CD-RW
•
If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
•
About media that can be played.
Use only compact discs with the label side showing the CD logo
marks below.
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-
ReWritable) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA
formatted audio files.
•
Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a
recording failed or a re-recording was attempted, copy-
protected CDs which do not conform to the audio CD
industry standard.
•
Use discs with MP3/WMA files written in a format
compatible with this unit. For details, see page 12-13.
5-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Time (CDA-9833 only)
Getting Started
Press MENU to select SETUP.
1
SOURCE/ DISP/
POWER B.OUT
Rotary
TITLE
Press g or f to select the CLOCK mode.
2
encoder
Turn the Rotary encoder to adjust the hours
within 15 seconds.
3
When the hour has been adjusted, press the
Rotary encoder.
4
Turn the Rotary encoder to adjust the minutes
within 15 seconds.
5
c
TILT 98
g MENU f MUTE RESET
When the setting has been completed, press
MENU to select RETURN.
6
Turning Power On and Off
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Press SOURCE/POWER to turn on the unit.
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder for at least 2
seconds after setting the “hour.” Minutes will reset to 00. If the
display shows over “30” minutes when you do this, the time will
advance one hour.
•
The unit can be turned on by pressing any other button except eject
c and TITLE
.
Press and hold SOURCE/POWER for at least 2
seconds to turn off the unit.
•
The first time power is turned on, the volume will start from level 12.
Opening and Closing the Movable Display
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
Press c.
The movable display will open.
time, after installing the CD changer, after changing the car battery, etc.
Turn off the unit power.
1
Press RESET with a ball-point pen or similar
pointed object.
2
To close the movable display, press c again.
The movable display will close.
Setting the Time and Calendar (CDA-9835 only)
Press MENU to select SETUP.
1
2
3
•
•
Do not apply shock to the movable display when it is open as it
may result in malfunction of the unit.
The display may be dim during low temperatures and immediately
after turning on the power. The brightness will return to normal as
time elapses.
Press g or f to select the CLOCK mode.
Turn the Rotary encoder to set year within 15
seconds.
•
The display will stop at the set tilt angle when closing.
Caution
Press the Rotary encoder.
4
Keep hands (or any other object) away from the display while it
is opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
Repeat steps 3 and 4 above to set month, day, time
and minutes within 15 seconds.
5
When the setting has been completed, press
MENU to select RETURN.
6
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder for at least 2
seconds after setting the “hour.” Minutes will reset to 00. If the
display shows over “30” minutes when you do this, the time will
advance one hour.
6-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Tilt Adjustment
Switching the Display modes (CDA-9835
only)
Movable display
You can select the display pattern mode from three display patterns.
Press DISP/B.OUT to select the desired display
pattern mode.
Each press changes the display patterns.
The movable display may be adjusted to 3 different tilt angles
depending upon user preference.
Basic display of each source → Animation display pattern1 →
Animation display pattern2 → Basic display of each source
Press TILT 98 to adjust the tilt angle of the movable
display.
Detaching and Attaching the Front Panel
Detaching
•
The display will close a half minute after the ignition key is turned
to the OFF position.
Turn off the unit power.
1
•
The adjusted tilt angle of the display is stored in memory. There is
no need to re-adjust the tilt angle when the power is turned back on
.
Press
front panel pops out.
(Release) at the upper left side until the
2
Caution
Keep hands (or any other object) away from the display while it is
opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
Grasp the left side of the front panel and pull it out.
3
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
•
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
To protect the front panel, place it in the supplied carrying case.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
Attaching
level by 20 dB.
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
1
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Push the left side of the front panel until it locks
firmly into the main unit.
2
Pressing MUTE again will bring the audio back to its
previous level.
2
Changing the Display Type (CDA-9833 only)
There are three selectable display types. You can also deactivate the
display.
1
Press DISP/B.OUT to switch the display type.
TYPE1 → TYPE2 → TYPE3 → OFF → TYPE1
•
•
Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
Attach the front panel carefully. Hold the panel by its sides to avoid
pushing any buttons by mistake.
TYPE1 : The indicator on the left changes in a fixed sequence.
TYPE2 : The indicator on the left changes according to the
setting (see "Setting the Multicolor Illumination" on
page 23).
TYPE3 : The indicator on the left changes according to audio
level.
7-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
Radio
SOURCE/ TUNE/
BAND/
TEL.
SEARCH
POWER
A.ME
The frequency is manually tuned in steps (Manual tuning).
Press g or f to tune in the desired station.
Holding down g or f will change the frequency
4
continuously.
•
The ST indicator appears on the display when a stereo FM station
is tuned in.
Rotary
encoder
Preset buttons
(1 through 6)
g
f
MENU
Manual Storing of Station Presets
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
1
Changing the Radio Frequencies for each
Country
For customers not living in North America, change the radio
frequencies as follows.
Press and hold, for at least 2 seconds, any one of
the preset buttons (1 through 6) into which you
wish to store the station.
2
The selected station is stored.
The display shows the band, preset no. and station
frequency memorized.
Press MENU to select the SETUP mode.
1
•
•
A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
Select the "AREA" mode by pressing g or f.
2
3
Choose either AREA 1 or AREA 2 by turning the
Rotary encoder.
AREA 1: Radio frequencies for North America
AREA 2: Other Radio frequencies
Automatic Memory of Station Presets
Press MENU to select RETURN.
4
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
1
•
The stored radio stations will be cleared every time you change the
setting.
Press and hold TUNE/A.ME for at least 2 seconds.
2
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
Listening to Radio
Press SOURCE/POWER until a radio frequency
appears in the display.
1
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
•
If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
2
FM1 → FM2 → AM → FM1
Tuning to Preset Stations
Press TUNE/A.ME to select the tuning mode.
3
Press BAND/TEL. repeatedly until the desired
band is displayed.
1
CDA-9835:
DX (Distance mode) → LOCAL (Local mode) →
MANUAL (Manual mode) → DX
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and
frequency of the station selected.
2
CDA-9833:
DX SEEK (Distance mode) → SEEK (Local mode) →
OFF (Manual mode) → DX SEEK
•
The initial mode is Distance mode.
8-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Station Title Search Function
If the title of a radio station is entered, you can search for that radio
CD / MP3 / WMA
station by its title while listening to the currently received radio
station.
.
SOURCE/
POWER -/J
TITLE
SEARCH
8
Press SEARCH
Search mode.
in Radio mode to switch to Title
1
The first title input blinks in the display.
Select the desired title by turning the Rotary
encoder within 10 seconds.
2
3
Press the Rotary encoder to receive the
frequency of the selected title.
g
f
Rotary
encoder
9
F
4(
)
5(
)
6(
)
c
•
Title Search mode is canceled by pressing and holding SEARCH
for at least 2 seconds.
•
If a station has no title, "NO TITLE" is displayed for 2 seconds.
Playback
Frequency Search Function
You can search for a radio station by its frequency.
Press c.
1
2
The movable display will open.
Insert a disc with the label side facing up.
Press and hold SEARCH
in Radio mode to activate Frequency Search mode.
for at least 2 seconds
1
2
The disc will be pulled into the unit automatically.
Turn the Rotary encoder within 10 seconds to
select the desired frequency.
Press the Rotary encoder to receive the selected
frequency.
3
The movable display will close and playback will begin.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
•
Frequency Search mode is canceled by pressing and holding
SEARCH for at least 2 seconds.
The mode will change every time the button is pressed.
TUNER → CD → CD CHANGER* → TUNER
* Only when the CD changer is connected
While playing back MP3/WMA, press 8 or 9 to
3
select the desired folder.
Pressing and holding 8 or 9 will change folders
continuously.
Press g or f to select the desired track (file).
4
Returning to the beginning of the current track (file):
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track (file) :
Press f.
Fast forward :
Press and hold f.
To pause playback, press -/J.
Pressing -/J again will resume playback.
5
To eject the disc, press c.
6
•
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold c for at least 2 seconds
with the movable display open.
•
Continued
9-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
The CD-player can play discs containing audio data, MP3 data
and WMA data.
Playing back a Playlist
You can play playlists you have prepared in advance on the computer.
Both MP3 and WMA playlists can be played.
Playlists that can be played back by this device have the file extension
"m3u"/"asx."
A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
"MP3" is displayed during MP3 playback.(CDA-9833 only)
"WMA" is displayed during WMA playback. (CDA-9833 only)
The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
•
•
•
•
If the HDA-5460 model is connected to the unit, some operations
(for example changing the source, selecting the file by holding
buttons up or down, etc.), can be carried out on this unit.
Press 8 or 9 to select a playlist.
By pressing and holding 8 or 9, the playlists move up or
down continuously.
•
•
•
•
If there is a playlist and folder on the disc, the playlist starts to
play back prior to the folder.
Up to 5 playlist can be played back. Playlists from the 6th onwards
cannot be played back.
Refer to the software instruction manual on how to create a
playlist.
Playlist playback applies only to the selected playlist. To play the
next playlist or folder, perform the folder up/down operation.
MP3/WMA Play Display
CDA-9835
The folder number and file number will be displayed as
described below.
19 20
Playlist Display
Folder number
display
While playing back a playlist, the folder and file numbers that are
stored in the playlist are displayed.
File number
display
CDA-9835
CDA-9833
The folder number, file number, sampling rate, and bit rate will
be displayed as described below.
19 20
Playlist
Folder number display
File number display
CDA-9833
01 03
01 03
kHz
44 .1
LIST
Sampling rate display
The sampling rate and the bit
rate (frame display) are
alternately displayed.
Folder number display
File number display
01 03
kbps
160
Bit rate display
•
Press TITLE
to switch the display. Please see “Displaying the
Title/Text” (page 20) for information about display switching.
10-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play
M.I.X. (Random Play)
Press 4 (
played.
The track (file) will be played repeatedly.
) to play back repeatedly the track being
Press 5 (
) in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
Press 4 (
) again and select OFF to deactivate repeat play.
To cancel M.I.X. play, press 5 (
) again.
CD mode :
CD mode :
↓
RPT
↓
: Only a track is repeatedly played back
*1
RPT : A disc is repeatedly played back
M.I.X.:
Track are played back in
random sequence.
↓
*3
↓
M.I.X.:The tracks on all the CDs in the current
magazine will be included in the random
playback sequence.
(off)
↓
(off)
*1 When a CD changer is connected
•
If REPEAT is set to ON during M.I.X. play in CD changer mode,
M.I.X. will apply to the current disc only.
*3 When a CD changer equipped with the All M.I.X. function is
connected
MP3/WMA mode :
•
If M.I.X. is set to ON during
RPT (REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
RPT
: Only a file is repeatedly played back
↓
MP3/WMA mode :
RPT : Only files in a folder are repeatedly played back
↓
*2
↓
RPT : A disc is repeatedly played back
M.I.X.: Only files in a folder are played back in
random sequence.
↓
(off)
↓
M.I.X.:Files are played back in random sequence. If
an MP3 compatible CD changer is
connected, all files in a disc are played back
in random sequence, and playback shifts to
the next disc.
*2 When an MP3 compatible CD changer is connected
•
If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In the CD changer mode (for the CDA-9835 model), press F to
display the M.I.X./REPEAT/SCAN function guide where the preset
buttons (1 to 6) are explained, and go to the step above. When no
buttons are pressed, the guide disappears after 10 seconds but the
mode remains active.
In the CD changer mode (for the CDA-9833 model), press F to
illuminate the “FUNC” indicator, and go to the step above within
5 seconds.
↓
(off)
•
If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In the CD changer mode (for the CDA-9835 model), press F to
display the M.I.X./REPEAT/SCAN function guide where the preset
buttons (1 to 6) are explained, and go to the step above. When no
buttons are pressed, the guide disappears after 10 seconds but the
mode remains active.
In the CD changer mode (for the CDA-9833 model), press F to
illuminate the “FUNC” indicator, and go to the step above within
5 seconds.
•
If a 12-disc CD changer is connected:
In the CD changer mode (for the CDA-9835 model), press F to
display the M.I.X./REPEAT/SCAN function guide where the preset
buttons (1 to 6) are explained, and go to the step above. When no
buttons are pressed, the guide disappears after 10 seconds but the
mode remains active.
In the CD changer mode (for the CDA-9833 model), press F twice
to illuminate the “FUNC” indicator, and go to the step above
within 5 seconds.
•
If a 12-disc CD changer is connected:
In the CD changer mode (for the CDA-9835 model), press F to
display the M.I.X./REPEAT/SCAN function guide where the preset
buttons (1 to 6) are explained, and go to the step above. When no
buttons are pressed, the guide disappears after 10 seconds but the
mode remains active.
In the CD changer mode (for the CDA-9833 model), press F twice
to illuminate the “FUNC” indicator, and go to the step above
within 5 seconds.
•
When playing back a playlist, M.I.X. cannot be played.
11-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder Name Search mode
Scanning Programs
Turn the Rotary encoder within 10 seconds to
2
Press 6 (
) to activate the Scan mode.
select the desired folder or playlist.
The first 10 seconds of each track (file) will be played back in
succession.
Press the Rotary encoder to play back the first
file in the selected folder or playlist.
3
To stop scanning, press 6 (
) and deactivate the Scan
mode.
•
•
•
Folder Name Search mode is canceled by pressing and holding
SEARCH
for at least 2 seconds.
•
If a 6-disc CD changer or an MP3 compatible CD changer is
While in Folder Name Search mode, press SEARCH to switch to
File Search mode.
"NO FILE" is displayed for 2 seconds if the folder or playlist that
is selected by the Folder Name Search mode contains no files.
"0 (zero)" is displayed for the root folder.
connected:
In the CD changer mode (for the CDA-9835 model), press F to
display the M.I.X./REPEAT/SCAN function guide where the preset
buttons (1 to 6) are explained, and go to the step above. When no
buttons are pressed, the guide disappears after 10 seconds but the
mode remains active.
•
•
Folder Name Search cannot be made during M.I.X. play.
In the CD changer mode (for the CDA-9833 model), press F to
illuminate the “FUNC” indicator, and go to the step above within
5 seconds.
Quick Search
•
If a 12-disc CD changer is connected:
You can search for tracks(files).
In the CD changer mode (for the CDA-9835 model), press F to
display the M.I.X./REPEAT/SCAN function guide where the preset
buttons (1 to 6) are explained, and go to the step above. When no
buttons are pressed, the guide disappears after 10 seconds but the
mode remains active.
In the CD changer mode (for the CDA-9833 model), press F twice
to illuminate the “FUNC” indicator, and go to the step above
within 5 seconds.
Press and hold SEARCH
in the CD/Changer/MP3/WMA mode to activate
Quick Search mode.
for at least 2 seconds
1
Turn the Rotary encoder within 10 seconds to
select a desired track(file).
The selected track is played back immediately.
2
•
Quick Search mode is canceled by pressing and holding SEARCH
for at least 2 seconds.
Searching from CD Text
Tracks can be searched and played using the CD text on the disc. In
the case of discs and changers that do not support text, searches can
be made using the track numbers.
About MP3/WMA
CAUTION
Press SEARCH
This will set the search mode.
during play.
Except for private use, duplicating audio data (including MP3/
WMA data) or distributing, transferring, or copying it, whether for
free or for a fee, without permission of the copyright holder is
strictly prohibited by the Copyright Act and by international treaty.
1
2
Turn the Rotary encoder to select the desired
track, then press the Rotary encoder.
This will play the selected track.
What is MP3?
•
•
Press and hold SEARCH for at least 2 seconds in the search
mode to cancel. Or, the search mode will be canceled when an
operation has not been performed in 10 seconds.
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint
activity institution of the IEC.
CD text search cannot be made during M.I.X. play.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the
human ear or masked by other sounds.
File/Folder Name Search (concerning MP3/WMA)
You can display and search for the folder and file name while
listening to the file currently being played back.
Press SEARCH
or Folder Name Search mode in MP3/WMA mode.
to select File Name Search mode
1
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio
data.
File Name Search mode
WMA allows you to create music files and store them at higher
ratios of compression than MP3 audio data (approx. half
original size). This is achieved while still maintaining CD
quality sound.
Press 8 or 9 to select another Folder.
2
3
Select the desired file by turning the Rotary
encoder within 10 seconds.
Method for creating MP3/WMA files
Press the Rotary encoder to play back the
selected file.
4
Audio data is compressed by using MP3/WMA specified
software. For details on creating MP3/WMA files, refer to the
user's manual for that software.
MP3/WMA files that can be played back by this device have
the file extension “mp3” / “wma”. Files with no extension
cannot be played back. (WMA ver. 7.1 and 8 are supported)
•
•
File Name Search mode is canceled by pressing and holding
SEARCH
for at least 2 seconds.
While in File Name Search mode, press SEARCH to switch to
Folder Search mode.
•
•
File Name Search cannot be made during M.I.X. play.
File Name Search cannot be made while playing back a playlist.
12-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported playback sampling rates and bit rates
Order of tracks
The unit plays the files in the order that the writing software
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
writes them. Therefore, the playing order may not be the same
as the order you input. The playback order of the folders and
files is as follows. However, the folder and file playback order
differs from the folder no. and file no. indicated on the display.
Bit rates:
8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz,
22.05 kHz
0
1
Bit rates:
48 - 192 kbps
2
Note that for sampling rates, this device’s frame display (Page
20) may not display correctly.
This device may not play back correctly depending on
sampling rates.
Root
Folder
2
3
3
ID3 tags/WMA tags
4
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA file, this device can display the
title (track title), artist name, and album name ID3 tag/WMA
tag data.
4
This device can only display single-byte alphanumeric
characters (up to 30 for ID3 tags and up to 15 for WMA tags)
and the underscore. For non-supported characters, “NO
SUPPORT” is displayed.
5
6
5
The tag information may not be correctly displayed,
depending on the contents.
7
Producing MP3/WMA discs
1
MP3/WMA files are prepared, then written to a CD-R or CD-
RW using CD-R writing software. A disc can hold up to 256
folders and 999 files (including Root Folders).
Media supported
Folder
MP3/WMA File
The media that this device can play back are CD-ROMs, CD-
Rs, and CD-RWs.
Terminology
Corresponding File Systems
Bit rate
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). File/folder names are limited to 30 characters
(including the extension).
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1
kHz, so the sound is sampled (recorded) 44,100 times per second.
The higher the sampling rate, the higher the sound quality, but also
the larger the volume of data.
Valid characters for folder/file names are letters A-Z (all
caps), numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc.,
and other standards that conform to ISO9660. However,
sometimes the file names, folder names, etc., are not
displayed correctly.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files
into the specified audio compression format.
Tag
Formats supported
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
MP3: ID3 tag
This device supports CD-ROM XA, Mixed Mode CD,
Enhanced CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
WMA: WMA tag
Root folder
The root folder is found at the top of the file system. The root folder
contains all folders and files.
13-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
3
Sound Setting
SOURCE/
BAND/
TEL.
Rotary encoder
•
•
This function is inoperable when DEFEAT is set to ON (this page).
EQ mode is automatically canceled if no buttons are pressed
within 15 seconds.
POWER
Adjusting and Storing the Equalizer Curve
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
Preset buttons (1 through 6)
f
g MENU MX
Press and hold MENU for at least 2 seconds.
1
Press MENU to select USER EQ (USER'S EQ for
CDA-9833).
2
Adjusting Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat
Press BAND/TEL. to select your desired
frequency band.
3
Press Rotary encoder repeatedly to choose the
1
desired mode.
BAND1 → BAND2 → BAND3 → BAND4 → BAND5 →BAND1
Each press changes the modes as follows:
Press g or f to select your desired
frequency.
Adjustable frequency bands:
20Hz to 20kHz(in 1/3 octave steps)
4
SUBWOOFER*1 → BALANCE → FADER → DEFEAT →
VOLUME → SUBWOOFER*1
Subwoofer : 0 ~ +15
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
Turn the Rotary encoder to adjust the level.
5
6
Press SOURCE/POWER to select your desired
band width (Q).
Adjustable band width: 1.0, 1.5, 3.0
Press g or f after selecting the Subwoofer mode,
and the subwoofer output phase is toggled NORMAL
(PHASE 0°) or REVERS (PHASE 180°).
To store the adjusted curve
1) Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish to store
the adjusted curve.
•
•
If the Rotary encoder is not pressed within 5 seconds after
selecting the BALANCE, FADER, DEFEAT or SUBWOOFER
mode, the unit automatically returns to normal mode.
If you set the 2WAY/3WAY switch (pages 40 to 42) to 3WAY, you
cannot adjust the FADER mode.
To set another channel, repeat steps 3 to 6.
7
8
*1 When the subwoofer mode is set to OFF, its level and phase cannot
be adjusted.
Press the Rotary encoder to confirm the
adjusted contents.
The adjusted contents are not stored if the Rotary encoder
is not pressed.
Turn the Rotary encoder until the desired sound
is obtained in each mode.
By setting Defeat ON, previously adjusted settings of EQ
2
will return to the factory defaults and MX is turned off.
After setting, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
9
•
Depending on the connected devices, some functions and display
indications do not work.
•
•
The frequencies of adjacent bands cannot be adjusted within 4 steps.
EQ mode is automatically canceled if no buttons are pressed
within 15 seconds.
Equalizer Presets
3 typical equalizer settings are preset at the factory for a variety of
musical source material.
•
This function is inoperable when DEFEAT is set to ON (this page).
Press MENU to select Factory's EQ.
1
Indicators for sound setting
Press either g or f.
With each press of the button, the equalizer mode will
display the selected equalizer characteristic.
2
FLAT(OFF) ↔ ROCK ↔ POPS ↔ NEWS ↔ USER'S 1 to 6
↔ FLAT(OFF)
FLAT (OFF) : Flat frequency
ROCK : Emphasize lows and highs
POPS : Emphasize midrange
NEWS : Boost midrange and suppress highs and lows
USER'S 1 to 6 : Recall the stored preset number in "Adjusting
and Storing the Equalizer Curve."
Lights when MX is on.
Lights when the Equalizer, Crossover and Time Correction
(Bass Focus) are set to anything other than factory default.
14-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 way mode
Recalling the Stored Equalizer Curve
Cut-off frequency
(1/3 octave steps)
Slope
Press and hold MENU for at least 2 seconds.
1
Level
Press MENU to select USER EQ (USER'S EQ for
CDA-9833).
2
HPF
LPF
HPF
LPF
FLAT, 6,
12, 18,
24 dB/oct
Press any one of the preset buttons (1 through
6) to activate your desired curve.
3
Low range
speaker
20 Hz -
200 Hz
0 to
− 12 dB
----
----
Press MENU to select RETURN.
The unit returns to normal mode.
4
FLAT, 6,
12, 18,
24 dB/oct 24 dB/oct
FLAT, 6,
12, 18,
Mid range
speaker
20 Hz -
200 Hz
20 Hz -
20 kHz
0 to
−12 dB
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
•
EQ mode is automatically canceled if no operation is performed
within 15 seconds.
FLAT*1
6, 12, 18,
24 dB/oct
•
•
This function is inoperable when DEFEAT is set to ON (page 14).
You can recall the adjusted equalizer curve from "Equalizer Presets"
(page14).
1 kHz -
20 kHz
0 to
−12 dB
High range
speaker
----
----
*1 Only when selecting USER'S in "Setting the Response Slope
for the High Range Speaker (TW SETUP)" (page 25).
About the Crossover
Crossover:
Low range
Mid range High range
This unit is equipped with an active crossover. The crossover limits
the frequencies delivered to the outputs. Each channel is controlled
independently. Thus, each speaker pair can be driven by the
frequencies for which they have been optimally designed.
The crossover adjusts the HPF (high pass filter) or LPF (low pass
filter) of each band, and also the slope (how fast the filter rolls off the
highs or lows).
(Different from actual display)
Adjustments should be made according to the reproduction
characteristics of the speakers. Depending on the speakers, a passive
network may not be necessary. If you are unsure about this point,
please consult your authorized Alpine dealer.
Level adjusting
(0 to - 12 dB)
Output frequency range
2 way mode
Slope FLAT
Slope adjusting
Cut-off frequency
Slope
(1/3 octave steps)
Level
(Different from actual display)
LPF cut-off
frequency
20 Hz
HPF cut-off
frequency
HPF
LPF
HPF
LPF
FLAT, 6,
12, 18,
24 dB/oct
Low range
speaker
20 Hz -
200 Hz
0 to
−12 dB
•
•
•
HPF (high pass filter): Cuts the lower frequencies and allows the
higher frequencies to pass.
LPF (low pass filter): Cuts the higher frequencies and allows the
lower frequencies to pass.
Slope: The level change (in dB) for a frequency change of one
octave.
The higher the slope value, the steeper the slope becomes.
Adjust the slope to FLAT to bypass the HP or LP filters.
Do not use a tweeter without the HPF on or set to a low frequency,
as it may cause damage to the speaker due to the low frequency
content.
----
----
Rear high
range
speaker
FLAT, 6,
12, 18,
24 dB/oct
20 Hz -
200 Hz
0 to
−12 dB
----
----
----
----
•
•
•
Front high
range
speaker
FLAT, 6,
12, 18,
24 dB/oct
20 Hz -
200 Hz
0 to
−12 dB
•
•
You cannot adjust the crossover frequency higher than the HPF or
lower than the LPF.
Adjustment should be made according to the recommended
crossover frequency of the connected speakers. Determine the
recommended crossover frequency of the speakers. Adjusting to a
frequency range outside that recommended may cause damage to
the speakers.
Low range
High range
For the recommended crossover frequencies of Alpine speakers,
refer to the respective Owner's Manual.
We are not responsible for damage or malfunction of speakers
caused by using the crossover outside the recommended value.
(Different from actual display)
15-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Press SOURCE/POWER to select the desired
slope.
Adjustable slope: 0 (FLAT (OFF))*, 1 (6 dB/oct.),
2 (12 dB/oct.), 3 (18 dB/oct.),
4 (24 dB/oct.)
5
6
Adjusting and Storing the Crossover Settings
Before performing the following procedures, refer to “About the
Crossover” (page 15).
Press and hold MENU for at least 2 seconds.
1
* FLAT can be set for the HIGH slope only when USER'S
is selected in "Setting the Response Slope for the High
Range Speaker (TW SETUP)" (page 25). Depending on
the response characteristics of the speaker, care should
be taken when setting the response slope to FLAT, as
speaker damage may result. A message is displayed
when the response slope for the high range speaker is
set to FLAT.
Press MENU to select X-OVER.
2
2 WAY System
Press BAND/TEL. to select desired parameter.
3
LOW (LO) → MID → HIGH → LOW (LO)
(Subwoofer)
(REAR) (FRONT) (Subwoofer)
Turn the Rotary encoder to select the desired
output level.
Adjustable output level: -12 to 0 dB.
Press g or f to select desired cut-off
frequency point (cross over point).
Adjustable frequency bands: 20Hz to 200Hz (in 1/3
octave steps)
4
5
6
To store the adjusted contents
1) Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish to store
the adjusted contents.
Press SOURCE/POWER to select desired slope.
Adjustable slope: 0 (FLAT (OFF)), 1 (6 dB/oct.),
2 (12 dB/oct.), 3 (18 dB/oct.),
For setting another channel, repeat the steps 3 to 6.
7
8
4 (24 dB/oct.)
Press the Rotary encoder to confirm the
adjusted contents.
The adjusted contents are not stored if the Rotary encoder
Turn the Rotary encoder to select the desired
output level.
is not pressed.
Adjustable output level: -12 to 0 dB.
To store the adjusted contents
After setting, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
9
1) Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish to store
the adjusted contents.
For setting another channel, repeat the steps 3 to 6.
•
About the 2way/3way system
You can switch to 2way/3way system mode with the 2way/3way
switch on the bottom of the unit (pages 40 to 42).
7
8
Press the Rotary encoder to confirm the
adjusted contents.
The adjusted contents are not stored if the Rotary encoder
When setting to “3 WAY ”:
The unit can be operated in a 3 way system.
is not pressed.
F/R Sub-W
When setting to “F/R/Sub-W ”:
After setting, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
9
The unit can be operated in a 2 way system.
3WAY
•
Crossover mode is automatically canceled if no operation is
performed within 15 seconds.
•
Crossover mode is automatically canceled if no operation is
performed within 15 seconds.
Recalling the Stored Crossover Settings
3 WAY System
Press and hold MENU for at least 2 seconds.
1
Press BAND/TEL. to select desired parameter.
3
Press MENU to select X-OVER.
2
LOW (LO) → MID-L → MID-H → HIGH → LOW (LO)
Press any one of the preset buttons (1 through
6) that has your desired crossover settings in
memory.
3
Press g or f to select desired cut-off
frequency point (cross over point).
4
Adjustable frequency bands:
LOW : 20Hz to 200Hz (in 1/3 octave steps)
MID-L : 20Hz to 200Hz (in 1/3 octave steps)
MID-H : 20Hz to 20kHz (in 1/3 octave steps)
HIGH : 1kHz to 20kHz (in 1/3 octave steps)
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
4
•
Crossover mode is automatically canceled if no operation is
performed within 15 seconds.
16-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Example 2. Listening Position: All Seats
About Time Correction
Adjust the time correction level of each speaker to almost the same level.
The distance between the listener and the speakers in a car vary
widely due to the complex speaker placement. This difference in the
distances from the speakers to the listener creates a shift in the sounds
image and frequency characteristics. This is caused by the time delay
between the sound reaching the listener’s right versus the left ear.
To correct this, the CDA-9835/CDA-9833 is able to delay the audio
signal to the speakers closest to the listener. This effectively creates a
perception of increased distance for those speakers. The listener can
be placed at an equal distance between the left and right speakers for
optimum staging.
Sit in the listening position (driver’s seat, etc.) and
measure the distance (in meters) between your
head and the various speakers.
1
Calculate the difference between the distance to
2
the farthest speaker and the other speakers.
L = (distance to farthest speaker) – (distance to other
speakers)
Divide the distances calculated for the speakers by
3
The adjustment will be made for each speaker in 0.1 ms steps.
the speed of sound (343 m/s (765 mph) at 20˚C).
These values are the time correction values for the
different speakers.
Example 1. Listening Position: Front Left Seat
Adjust the time correction level of the front left speaker
to a high value and the rear right to zero or a low value.
Bass Focus
The time difference between the front-rear/left-right speakers, can be
adjusted at the same time. With an initial delay of 0.1 ms for each of
the 0 to 99 steps, audible time correction can be done.
Press and hold MENU for at least 2 seconds.
1
5.1ms
Press MENU to select Bass Focus mode or Time
Correction mode.
2
0.5m
2.25m
Press g or f to select the Bass Focus mode.
3
Bass Focus mode ↔ Time Correction mode
Press BAND/TEL. to select the speakers to be
adjusted (see below).
4
The sound is not balanced because the distance between the
listening position and the various speakers is different.
The difference in distance between the front left speaker and
the rear right speaker is 1.75 m (68-7/8").
FL
RL
FR
RR
FL
RL
FR
RR
→
→
Here we calculate the time correction value for the front left
speaker in the diagram on the above.
Front (left-right)
speakers
Left (front-rear)
speakers
Conditions:
Farthest Speaker – listening position : 2.25 m (88-9/16")
Front left speaker – listening position : 0.5 m (19-11/16")
Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8")
Time correction = 1.75 ÷ 343*1 × 1000 = 5.1 (ms)
FL
RL
FR
RR
FL
RL
FR
RR
←
←
*1 Speed of sound: 343 m/s (765 mph) at 20˚C
In other words, giving the front left speaker a time correction
value of 5.1 ms makes it seem as if its distance from the
listener is the same as the distance to the farthest speaker.
Rear (left-right)
speakers
Right (front-rear)
speakers
Time correction eliminates the differences in the time required
for the sound to reach the listening position.
The time of the front left speaker is corrected by 5.1 ms so that
its sound reaches the listening position at the same time as the
sound of other speakers.
Turn the Rotary encoder to adjust the delay (see
Time Difference Table).
5
6
To set another channel (speakers), repeat steps 4
and 5.
Continued
17-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Difference Table
Press the Rotary encoder to confirm the adjusted
contents.
The adjusted contents are not stored if the Rotary encoder
7
8
Time
Difference
(ms)
Time
Difference
(ms)
Delay
Number
Distance
cm (inch)
Delay
Number
Distance
cm (inch)
is not pressed.
0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
0.0
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
174.9 (68-7/8")
178.4 (70-1/4")
181.8 (71-9/16")
185.2 (72-7/8")
188.7 (74-1/4")
192.1 (75-5/8")
195.5 (77")
After setting, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
1
3.4 (1-3/8")
2
6.9 (2-3/4")
3
10.3 (4-1/16")
13.7 (5-3/8")
4
•
•
Any manual time correction adjustments will also affect corrections
made in Bass Focus.
Bass Focus mode is automatically canceled if no operation is
performed within 15 seconds.
5
17.2 (6-13/16")
20.6 (8-1/8")
6
7
24.0 (9-7/16")
27.4 (10-13/16")
30.9 (12-3/16")
34.3 (13-1/2")
37.7 (14-13/16")
41.2 (16-1/4")
44.6 (17-9/16")
48.0 (18-7/8")
51.5 (20-1/4")
54.9 (21-5/8")
58.3 (22-15/16")
61.7 (24-1/4")
65.2 (25-5/8")
68.6 (27")
198.9 (78-5/16")
202.4 (79-11/16")
205.8 (81")
8
9
Example setting for steps 4 and 5
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
209.2 (82-3/8")
212.7 (83-3/4")
216.1 (85-1/16")
219.5 (86-3/8")
223.0 (87-3/4")
226.4 (89-1/8")
229.8 (90-1/2")
233.2 (91-13/16")
236.7 (93-3/16")
240.1 (94-1/2")
243.5 (95-7/8")
247.0 (97-1/4")
250.4 (98-9/16")
253.8 (99-7/8")
257.3 (101-1/4")
260.7 (102-5/8")
264.1 (104")
(1) Press BAND/TEL. to select the front (left and right)
speakers.Then turn the Rotary encoder to select
1.5 ms (Delay no. 15 in the table).The time
difference is 1.5 ms for both front (left and right
speakers.
72.0 (28-3/8")
75.5 (29-11/16")
78.9 (31-1/16")
82.3 (32-3/8")
85.8 (33-3/4")
89.2 (35-1/8")
92.6 (36-7/16")
96.0 (37-3/4")
99.5 (39-13/16")
102.9 (40-1/2")
106.3 (41-7/8")
109.8 (43-1/4")
113.2 (44-9/16")
116.6 (45-7/8")
120.1 (47-5/16")
123.5 (48-5/8")
126.9 (49-15/16")
130.3 (51-5/16")
133.8 (52-11/16")
137.2 (54")
1.5ms
1.5ms
267.5 (105-5/16")
271.0 (106-11/16")
274.4 (108-1/16")
277.8 (109-3/8")
281.3 (110-3/4")
284.7 (112-1/16")
288.1 (113-1/16")
291.6 (114-3/4")
295.0 (116-1/8")
298.4 (117-1/2")
301.8 (118-13/16")
305.3 (120-3/16")
308.7 (121-1/2")
312.1 (122-7/8")
315.6 (124-1/4")
319.0 (125-9/16")
322.4 (126-7/8")
325.9 (128-5/16")
329.3 (129-5/8")
332.7 (131")
(2) Press BAND/TEL. to select the left (front and rear)
speakers.Then turn the Rotary encoder to select
1.5 ms (Delay no. 15 in the table).The time
difference is 3.0 ms*1 for the front left speaker, and
1.5ms for the left rear speaker, creating the
impression of an equal listening between the front
left speaker and the other speakers.
140.6 (55-3/8")
144.1 (56-3/4")
147.5 (58-1/16")
150.9 (59-3/8")
154.4 (60-3/4")
157.8 (62-1/8")
161.2 (63-7/16")
164.6 (64-3/4")
168.1 (66-3/16")
171.5 (67-1/2")
3.0ms
1.5ms
1.5ms
1.5ms
336.1 (132-5/16")
339.6 (133-11/16")
1.5ms
*1 Because the time difference was already set to 1.5 ms for the front
left speaker to begin with, the additional correction of 1.5 ms makes
the total time difference of the front left speaker 3.0 ms.
18-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting and Storing the Time Correction
Setting the MX Mode
Before performing the following procedures, refer to "About Time
Correction" (page 17).
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, and MP3, will be
able to reproduce the music clearly even in cars with a lot of road noise.
Press and hold MENU for at least 2 seconds.
1
Press MX to select MX ON.
1
Press MENU to select Bass Focus mode or Time
Correction mode.
2
Press SOURCE/POWER to select the source to
which you want to apply MX (Media Xpander).
2
Press g or f to make time corrections.
3
Press and hold MX for at least 2 seconds to
activate the level setting mode.
3
Each press changes the mode as follows:
Bass Focus mode ↔ Time Correction mode
Turn the Rotary encoder to select your preferred
level or OFF.
4
Press BAND/TEL. to select a speaker to be
adjusted.
4
FM (MX level 1 to 3):
CDA-9835
The medium to high frequencies become clearer, and
produces well balanced sound at all frequencies.
F – L → F – R → R – L → R – R → SW – L → SW – R → F – L
CDA-9833
CD /WAV (MX level 1 to 3):
Front – L → Front – R → Rear – L → Rear – R → SUBW – L →
SUBW – R → Front – L
CD mode processes a large amount of data during playback.
MX takes advantage of this large data quantity to reproduce a
more clear, clean output.
Turn the Rotary encoder to adjust the desired
time correction value.
5
MP3/WMA/XM (MX level 1 to 3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close to
the original.
To store the adjusted contents
1) Press and hold, for at least 2 seconds, any one of the
preset button (1 through 6) into which you wish to store
the adjusted contents.
DVD (Video CD)
(MOVIE MX level 1 to 2):
The dialog portion of a video is reproduced more clearly.
Repeat step 4 and 5 to set another speaker.
6
7
(MUSIC MX level 1):
A DVD or Video CD contains a large quantity of data such as
music clip. MX uses this data to reproduce the sound
accurately.
Press the Rotary encoder to confirm the
adjusted contents.
The adjusted contents are not stored if the Rotary encoder
is not pressed.
AUX (MX level 1):
Choose the MX mode (MP3, MUSIC, or MOVIE) that
corresponds to the media connected.
If two external devices are connected, a different MX
mode for each media can be selected.
After setting, press MENU to select RETURN.
The unit returns to normal mode.
8
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Press Rotary encoder to return to normal mode.
5
•
If no operation is performed in 15 seconds, the unit returns to
normal mode.
•
•
To cancel MX mode for all music sources, press MX to turn MX off.
MX mode is automatically canceled if no buttons are pressed
within 15 seconds.
•
•
Each music source, such as FM radio, CD, and MP3/WMA can
have its own MX setting.
On disks with both MP3/WMA and CD-DA, when the source
changes from “MP3/WMA to CD-DA” or “CD-DA to MP3/WMA,”
MX-mode switching may delay playback slightly.
Setting to MX OFF sets MX mode of each music source to OFF.
This function is inoperable when DEFEAT is set to ON.
There is no MX mode for AM radio.
If an audio processor with the MX function (PXA-H700, etc.) is
connected, its own MX processing is applied to the music source.
Since the processor MX settings may not match the head unit, the
audio processor needs to be adjusted. For details, refer to the
Owner’s Manual of the audio processor.
Recalling the Stored Time Correction Settings
Press and hold MENU for at least 2 seconds.
1
•
•
•
•
Press MENU to select Bass Focus mode or Time
Correction mode.
2
Press g or f to make time corrections.
3
Each press changes the mode as follows:
Bass Focus mode ↔ Time Correction mode
Press the preset buttons (1 through 6) that has
your desired time correction in memory.
4
Press MENU to select RETURN.
The unit returns to normal mode.
5
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
•
Time Correction mode is automatically canceled if no operation is
performed within 15 seconds.
19-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CDA-9833
Other Functions
TRACK NO./
ELAPSED TIME
TEXT
(DISC NAME)
TEXT
(TRACK NAME)
3
3
*
*
→
→
→
→
→
TEXT
3
TEXT
(TRACK NAME)
TITLE
3
DISP/
(DISC NAME)
*
*
BAND/
TEL.
SOURCE/
POWER
2
-/J
TITLE
B.OUT
*
TRACK NO./
ELAPSED TIME
TITLE
TRACK NO./
ELAPSED TIME
CLOCK
7
*
TRACK NO./ELAPSED
TIME
TRACK NO./
ELAPSED TIME
→
EXTERNAL AMPLIFIER
INFORMATION
TEXT
3
(DISC NAME)
*
f
Rotary
encoder
g
MENU
Preset buttons
(1 through 6)
The display in MP3/WMA mode:
CDA-9835*1
Displaying the Title/Text
→
→
FOLDER NO./FILE NO./
TIME/
CALENDAR DISPLAY
ELAPSED TIME
It is possible to display the CD/Station title if the title has been previously
inputted (“Titling Discs/Stations” page 21). Text information, such as the
disc name and the track name, will be displayed if playing a CD text
compatible disc. It is also possible to display the folder name, the file
name, and the tag, etc., while playing MP3/WMA files.
FOLDER NAME*6
FILE NAME
→
→
→
→
FOLDER NO./FILE NO./
FOLDER NO./FILE NO./
ELAPSED TIME
ELAPSED TIME
ARTIST NAME*4
ALBUM NAME*4
Press TITLE
.
→
FOLDER NO./FILE NO./
FOLDER NO./FILE NO./
ELAPSED TIME
The display will change every time the button is pressed.
ELAPSED TIME
The display in Radio mode:
TRACK NAME*4
FRAME*5
CDA-9835*1
→
FOLDER NO./FILE NO./
FOLDER NO./FILE NO./
ELAPSED TIME
ELAPSED TIME
→
→
TIME/
FREQUENCY
7
*
EXTERNAL AMPLIFIER
CALENDAR DISPLAY
INFORMATION
→
2
7
*
*
EXTERNAL AMPLIFIER
FOLDER NO./FILE NO./
ELAPSED TIME
FOLDER NO./FILE NO./
ELAPSED TIME
TITLE
INFORMATION
→
→
FREQUENCY
FREQUENCY
CDA-9833
FOLDER NO./
FILE NO.
6
FOLDER NAME
*
FREQUENCY
→
→
→
ELAPSED TIME
FILE NAME
CDA-9833
2
2
2
*
*
4
4
FILE NAME
TRACK NAME
*
ARTIST NAME
*
TITLE
TITLE
→
→
→
4
4
4
→
→
→
TRACK NAME
*
ARTIST NAME
*
ALBUM NAME*
FREQUENCY
CLOCK
7
7
*
*
*
FOLDER NO./FILE NO.
CLOCK
FOLDER NO./FILE NO.
FOLDER NO./FILE NO.
ELAPSED TIME
→
FREQUENCY
TITLE
EXTERNAL AMPLIFIER
INFORMATION
EXTERNAL AMPLIFIER
INFORMATION
FREQUENCY
*1 The display example for the normal display mode is described. The
display changes depending on the display indication pattern. (See
"Switching the Display modes" on page 7)
The display in CD mode:
CDA-9835*1
*2 TITLE can be input or erased.
*3 Displayed during playback of a disc with CD Text.
“NO TEXT” will be displayed when the CD contains no Text data.
*4 ID3 tag/WMA tag
If an MP3/WMA file contains ID3 tag/WMA tag information, the
ID3 tag/WMA tag information is displayed (e.g., track name, artist
name, and album name). All other tag data is ignored.
“NO DATA” will be displayed when an MP3/WMA file contains no
ID3 tag/WMA tag information.
*5 The recording sampling rate and bit rate of the MP3/WMA file are
displayed.
*6 "0 (zero)" is displayed for the folder name of the root folder.
*7 Only when an external Amplifier Link compatible amplifier is
connected. For details, refer to "Displaying the External Amplifier
Information" (page 23).
→
→
→
→
TIME/
CALENDAR DISPLAY
TRACK NO./
ELAPSED TIME
TEXT (DISC NAME)*3
TEXT (TRACK NAME)*3
TRACK NO./
ELAPSED TIME
TRACK NO./
ELAPSED TIME
7
2
*
*
EXTERNAL AMPLIFIER
INFORMATION
TITLE
→
→
TRACK NO./
ELAPSED TIME
TRACK NO./
ELAPSED TIME
TRACK NO./
ELAPSED TIME
20-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
“NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
If the title was not previously input, “NO TITLE” is displayed.
The text or tag information may not be correctly displayed,
depending on the contents.
About the indicator display (CDA-9833 only)
When displaying Title/Text, the following indicators are lit
according to the mode.
•
•
This indicator shows the strength
of the telephone signal.
Titling Discs/Stations
It is possible to title your favorite CD's or radio stations.
These indicators
are constantly lit.
You cannot input titles on MP3/WMA discs.
1 2 3 4 5 6
Press TITLE
For details, see asterisk 2 of “Displaying the Title/Text”
and select the Title Display.
1
(page 20).
1
2
3
4
Press and hold TITLE
The first character will blink.
for at least 2 seconds.
2
3
When selection is available by turning the Rotary
encoder, an indicator is lit in the display.
Press BAND/TEL. to select the characters/symbols.
Upper case → Lower case → Numeral/Symbol → Upper case
When selection is available by pressing g or f,
the triangle indicators are lit in the display.
Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
4
5
1 This indicator is lit when a folder or playlist number is
displayed.
2 This indicator is lit when a track (file) number is displayed.
Press Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
3 This indicator is lit when the elapsed playback time is
displayed.
4 This indicator is lit when the temperature of the connected
external Amplifier Link compatible amplifier is displayed.
Repeat steps 3 and 5 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character (for CDA-9835 16th character) automatically
stores the title into memory.
Indicator/
Mode
MP3/WMA
Mode
TUNER
Mode
XM RADIO
Mode
6
CD Mode
Title being
displayed
1
—
—
—
Folder Name
being
displayed
2
—
—
—
—
—
When entering a title of less than 8 or 16 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 7 to complete the title.
File Name
being
displayed
3
4
5
—
—
—
—
Artist Name*
being
displayed
Artist Name
being
displayed
Correcting the title (CDA-9835 only)
In the title input mode, press SOURCE to move the cursor
to the input title line. Turn the Rotary encoder to move the
cursor to the portion to be corrected. Press SOURCE
again to return to the title input mode, and perform the
correction.
Album Name*
being
displayed
Text (Disc
Name) being
displayed
—
Track Name*
being
displayed
Music Title/
Channel
Name being
displayed
Text (Track
Name) being
displayed
Title being
displayed
6
Press TITLE
to record the title.
7
•
If you cancel while entering a title, selected characters are not
written.
* Tag information
•
You can enter 18 radio station titles (24 for the CDA-9833 model)
and 18 CD titles on this unit. If you try to store beyond the limit,
the display will show “FULL DATA.” At this point, no more titles
can be stored. To input a new title, one of the previously inputted
titles must first be deleted.
The CD Changer title length or memory capacity varies depending
upon the model being used.
When you want to erase a title, enter a space (and symbol “ ” for
the CDA-9833 model).
About “Title” and “Text”
Title:
With this device, it is possible to input the CD/Station name
(this page). This inputted name is referred to as a “title.”
You cannot input or display titles on MP3/WMA discs.
•
•
•
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as “text.”
The operations described in steps 3 to 6 must be made within 10
seconds. The input mode will be canceled if no action is taken for
over 10 seconds.
•
•
•
Some characters may not be displayed correctly with this device,
depending on the character type.
The CD changer must also be CD Text compatible for the Text
information to be displayed.
When the Scroll Setting (page 26) is set to “SCROLL MANUAL,”
press and hold TITLE
for at least 2 seconds to scroll the Text
information only once (TEXT DISPLAY, FOLDER NAME
DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).
21-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
To set the BASS VOLUME
Erasing Disc Title/Station Title
Turn the Rotary encoder to adjust the level.
4
5
Press TITLE
press again and hold for at least 2 seconds.
to select the Title Display.Then,
1
When the adjustment has been completed, press
MENU to select RETURN.
•
For details, see asterisk 2 of “Displaying the Title/Text” (page 20).
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Press and hold -/J for at least 2 seconds.
The title in the display will blink.
2
Press g or f repeatedly until the title you
want to erase is displayed.
3
4
5
To set the Amplifier
Press BAND/TEL. to select from the following
setting items to be adjusted.
4
Press and hold -/J for at least 2 seconds to erase
the title displayed.
INPUT → LOW PASS → SUBSONIC → P-EQ → BASS COMP
→ TCR → PHASE → TURN ON DELAY→ OUTPUT DISABLE
(SAFE) → INPUT
Press TITLE
to cancel the title erasing mode.
•
•
You cannot erase CD-TEXT.
"NO DATA" is displayed for 2 seconds if the title is not input in
step 2, or if all titles are erased in step 4.
Turn the Rotary encoder to change the settings.
5
6
Press the Rotary encoder if there are other
settings to be changed.
Repeat steps 5 and 6 (above).
Displaying Time
Press TITLE
repeatedly until the time is displayed.
Repeat steps 4 to 6 (above) if other items need to
be adjusted.
To set another amplifier, return to the step 3.
7
Each press changes the display.
For details, see “Displaying the Title/Text” (page 20).
To store the adjusted contents
•
•
Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
When the power is off but the ignition key is on, press TITLE to
display the time. (CDA-9833 only)
1) While adjusting the mode, press either button (1 or 2)
for at least 2 seconds.
The adjusted contents are stored.
To recall adjusted and stored contents
1) While adjusting the mode, press either button (1 or 2).
The adjusted and stored contents are recalled.
Blackout Mode On and Off
When Blackout mode is turned on, the display will turn off to reduce
power consumption. This additional power enhances the sound quality.
When adjustment has been completed, press
MENU to select RETURN.
8
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Press and hold DISP/B.OUT for at least 2 seconds to
activate the blackout mode.
The display will turn off.
To easily recall adjusted and stored contents
•
If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.
1) Press MENU to select A-Link.
2) Press g or f to select AMP 1 to 8.
3) Turn the Rotary encoder to select Preset 1 or Preset 2.
To cancel Blackout mode, press and hold DISP/B.OUT for at
least 2 seconds.
4) Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Setting an Amplifier Link
With an external Amplifier Link compatible amplifier MRD-M501or
MRD-M301 is connected, the amplifier settings are adjustable from
the head unit. A maximum of 8 external amplifiers can be adjusted.
•
•
For details of each of the settings, refer to the Owner's Manual of
the external amplifier.
If amplifier settings are made on the unit, do not then change the
setting with the amplifier buttons as the amplifier display may not
match the operations of the unit.
Press and hold MENU for at least 2 seconds.
1
• "No Link" is displayed if the amplifier is removed or its power
cannot be turned on, etc.
•
Press MENU to select A-Link.
2
If multiple amplifiers are connected to this unit, set a different ID
on each amplifier. Otherwise the display may flicker.
Press g or f to select AMP-ID (AMP1 to 8), or
BASS VOLUME.
3
22-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
To recall the stored color setting
Displaying the External Amplifier Information
When an external Amplifier Link compatible amplifier is connected,
the external amplifier's information (voltage, electric current,
temperature) can be shown in the display of the head unit.
1) While setting the mode, press any one of the preset
buttons (1 through 6).
The stored setting contents are recalled.
When the setting has been completed, press
MENU to select RETURN.
4
Press TITLE
the display of the external amplifier information.
in the Radio or CD mode to switch
1
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
•
For switching the display, refer to the section "Displaying the Title/
Text" (page 20).
• "No Memory" is displayed if a preset that has not been stored is
recalled.
•
For changing the XM display, refer to the section "Changing the
Display" (page 29).
CDA-9835
Changing the Lighting Color of All the Buttons
You can change the lighting color of the unit.
Electric current
Display
Voltage Display
Press MENU to select Illumination.
1
AMPERE:2.9A VOLTAGE:10.1V
Press SOURCE/POWER.
The lighting color of all the buttons are changed.
2
AMBER ON ↔ AMBER OFF(green)
•
The temperature display is indicated for animation display
pattern1 and animation display pattern2 in the section "Switching
the Display modes" (page 7).
When the setting has been completed, press
MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
3
CDA-9833
Electric current
Voltage Display
Display
• SOURCE/POWER, BAND/TEL, g and f buttons are
changed to that which you have set above in "Setting the Multicolor
Illumination" (this page).
12.4V 25.6A
75.0°F
Verifying the Software Version
Current version software can be verified in the display.
Temperature Display
•
To switch the display between Celsius and Fahrenheit, refer to
page 27.
Press and hold MENU for at least 2 seconds.
1
Press MENU to select Information.
The version is displayed.
2
Setting the Multicolor Illumination
You can change the lighting color of the unit.
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
3
Press MENU to select Illumination.
1
Press g or f to select your desired color.
2
BLUE ↔ GREEN ↔ AMBER ↔ RED ↔ (USER'S*) ↔ BLUE
* You can use your desired colors as shown below if you have already
registered to USER'S.
If you want to use colors other than the above
Turn the Rotary encoder to select colors (1
through 512).
3
Each press of BAND advances the color number by 30.
.............. ..............
19 184
.............. ..............
363 512
1
(Red)
(Amber)
(Green)
(Blue)
To store the setting contents
1) Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) .
The setting contents are stored.
23-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Data Downloading
i-Personalize™
Operation
Insert the CD-R disc containing the data.
If the source is not the CD mode, press SOURCE/
POWER to change to CD mode.
1
Press MENU to select the i-Personalize
(Download) mode.
2
SOURCE/
POWER
Rotary encoder
Press g or f to select “YES.”
Data search of the disc starts and the first file name is
displayed.
3
•
Selecting “NO” and pressing MENU will cancel the download
mode.
•
•
If a file is not found by the data search, “No File” is indicated.
The “No File” display will automatically disappear if no operation
is performed for 5 seconds.
f
g
MENU
Turn the Rotary encoder to select files that are
downloaded and then press the Rotary encoder
to start.
Data downloading starts.
If the MENU is pressed while downloading, download is
halt.
4
5
About i-Personalize™
You can download data (from Alpine’s website) to a CD-R, and
download and store the data to the CDA-9835/CDA-9833.
To start i-Personalize, access the URL below and follow the on-screen
instructions.
When data download is finished successfully, the
confirmation screen is displayed for 5 seconds (for
the CDA-9833 model, each confirmation screen of
download data is sequentially displayed), and
download finishes.
Downloadable data
Successfully downloaded items are indicated as checked
boxes on the confirmation screen.
Parametric
equalizer
Data is memorized in Preset 6 of the
Parametric EQ mode.
Time correction
Data is memorized in Preset 6 of the
Time Correction mode.
PARAMETRIC EQ data
The data is memorized in Preset 6 of Parametric EQ mode.
The memorized data settings in Preset 6 (Parametric EQ
mode) are automatically applied.
Crossover
Data is memorized in Preset 6 of the
crossover mode.
X-OVER (Cross over) data
Profile
Data is set to the opening display.
The data is memorized in Preset 6 of X-OVER mode. The
memorized data settings in Preset 6 (X-OVER mode) are
automatically applied.
You cannot download the data if the setting of the 2WAY/3WAY
switch is not suitable for the data.
(CDA-9835 only)
Calendar message
(CDA-9835 only)
Data is set to the calendar message.
The file name of download data shall be
“A_W*****.MP3.”
TIME CORRECTION data
The data is memorized in Preset 6 of the Time correction
mode. The memorized data settings in Preset 6 (Time
Correction mode) are automatically applied.
A_W∗∗∗∗∗.MP3
Press MENU to select RETURN.
6
Extender (fixed)
The display returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
•
•
When you download the data again, the data is overwritten in
Preset 6.
Data downloading is not possible during playlist playback.
You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.
•
•
For downloading procedure details, see ALPINE’s Web site.
If the HDA-5460 model is connected to this unit, the HDA-5460
hard disc can be used. Data that has been stored in the hard disc is
downloaded by the “Data Downloading” operation to CDA-9835/
CDA-9833. For details on how to download data to the hard disc,
refer to the Owner’s Manual of the HDA-5460 model.
If an external audio processor is connected, data that is
downloaded cannot be used.
•
24-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Customizing
SETUP
Switching the Tuner Mode
NORMAL (Initial setting) / HI-FI / STABLE
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
This unit incorporates the MAX TUNE SQ for the highest quality
tuner audio. Moreover, you can choose between three settings to suit
your own personal sound preferences and usage.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
SOURCE/
POWER
BAND/
TEL.
Rotary encoder
•
If you find the sound is very noisy while listening to the tuner in Hi-
Fi mode, we recommend you change to Normal mode.
Subwoofer On and Off
SUBWOOFER ON (Initial setting) / SUBWOOFER OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output phase and level.
g
f
MENU
1 Press the Rotary encoder repeatedly to select the
SUBWOOFER mode.
SUBWOOFER → BALANCE → FADER → DEFEAT →
VOLUME → SUBWOOFER
The common operation for SETUP is step 1 to 4 as
follows. See down below for further information
about each SETUP menu.
•
If you set the 2WAY/3WAY switch (pages 40 to 42) to 3WAY, you
cannot adjust the FADER mode.
Press MENU to select the SETUP mode.
SETUP mode is activated.
1
2 Press g or f.
The subwoofer output phase is toggled SUBWOOFER
NORMAL (0°) or SUBWOOFER REVERS (180°).
To adjust the level, turn the Rotary encoder.
Press g or f to select the desired SETUP
menu.
2
(e.g. Select BEEP)
Setting the Subwoofer Output
STEREO (Initial setting) / MONO
Here is the explanation for CDA-9835 display example.
You can set the subwoofer output to stereo or monaural. Make sure to
set the correct output for your subwoofer type.
CLOCK*1 ↔ FM TUNER SET ↔ DIMMER ↔ SUBWOOFER
(ON/OFF) ↔ SUBWOOFER (STEREO/MONO) ↔ PLAY MODE
↔ BEEP ↔ SCROLL ↔ INT MUTE ↔ INT AUDIO ↔ AUX IN
↔ (AUX NAME)*2 ↔ POWER-IC ↔ LCD CONTRAST*3 ↔
FONT SELECT*3 ↔ TUNER AREA*4 ↔ TW SETUP*5 ↔ A-LINK
TEMP*6 ↔ BGV SELECT*7 ↔ OPENING MSG.*7 ↔
CALENDAR*7 ↔ DEMO ↔ CLOCK*1
STEREO: Subwoofer stereo (L/R) output
MONO: Subwoofer monaural output
Setting the Response Slope for the High
Range Speaker (TW SETUP)
MAKER’S (Initial setting) / USER’S
*1 For the CDA-9835 model, refer to “Setting the Time and Calendar
(CDA-9835 only)” (page 6). For the CDA-9833 model, refer to
“Setting Time (CDA-9833 only)” (page 6).
*2 Displayed only when AUX is ON.
Depending on the response characteristics of the speaker, care should
be taken when setting the response slope of the high range speaker to
FLAT in 3-way mode (see “Adjusting and Storing the Crossover
Settings” on page 16), as speaker damage may result.
*3 CDA-9833 only.
*4 Refer to “Radio” (page 8).
*5 Displayed only when the 2WAY/3WAY switch (pages 40 to 42) is set
to 3WAY. This function cannot be selected when an external audio
processor is connected.
MAKER’S: As protection from possible speaker damage,
FLAT cannot be set for the response slope of the
high range speaker in 3-way mode.
*6 Displayed only when an external amplifier is connected.
*7 CDA-9835 only.
USER’S: The FLAT setting is possible in 3-way mode.
•
A message is displayed when the response slope for the high range
speaker is set to FLAT in 3-way mode.
Turn the Rotary encoder to change the setting.
(e.g. Select BEEP ON or BEEP OFF.)
3
Sound (Beep) Guide Function
BEEP ON (Initial setting) / BEEP OFF
Press MENU to select RETURN.
4
The display returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
This function will give audible feedback with varying tones
depending upon the button pressed.
•
For the XM Radio settings, refer to “XM Radio (Optional)” (pages
27 to 29), and for the MobileHub™Link settings, refer to
“MobileHub™Link Operation (Optional)” (pages 30,31).
25-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Calendar Display Pattern Switching
(CDA-9835 only )
mm/dd/yyyy(Initial setting) / dd/mm/yyyy / yyyy/mm/dd
Visual Customizing
Dimmer Control
DIMMER AUTO (Initial setting) / DIMMER MANUAL
You can switch the calendar display pattern to be shown when the
time is displayed.
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This
mode is useful if you feel the unit's backlighting is too bright at night.
yyyy : shows the year
mm : shows the month
dd
: shows the day
Scroll Setting
SCROLL AUTO / SCROLL MANUAL (Initial setting)
ex. dd/mm/yyyy → 25/12/2003
Demonstration
DEMO ON / DEMO OFF (Initial setting)
This CD player can scroll the disc and track names recorded on CD-
TEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
This unit has a Demonstration feature for the display and sound.
SCROLL AUTO : The CD text information, the text information
of folder and file names, and the tags are scrolled
automatically.
•
To quit Demo mode, set to DEMO OFF.
SCROLL MANUAL : The display is scrolled when a disc is
loaded or when a track is changed, etc.
MP3/WMA
Playing MP3/WMA Data
CD-DA (Initial setting) / CD-DA/MP3
•
The unit scrolls CD text names, folder names, file names or tag
display. The disc titles input manually (page 21) cannot be
scrolled.
This product can playback CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback
may be difficult. For these special cases, you can select playback of
CD data only. When a disc contains both CD or the MP3/WMA data,
playback starts from the CD data portion of the disc.
Switching the Character Font (CDA-9833 only)
TYPE1 (Initial setting) / TYPE2
Two types of font can be selected.
CD-DA : Only CD data can be played back.
CD-DA/MP3 : Both CD data and MP3/WMA file tracks can be
played back.
You can select the font type you like.
Adjusting Display Contrast (CDA-9833 only)
CONTRAST
•
Perform this setting before inserting a disc. If a disc has already
been inserted, perform the setting after you remove the disc. (If you
use an MP3 changer, you have to change discs.)
You can adjust the display contrast for better visibility.
You can adjust in a range of - 6 and + 6.
External Device
•
The initial setting at the factory is “0.”
Turning Mute Mode On/Off
INT MUTE ON (Initial setting) / INT MUTE OFF
Opening Message ON/OFF Setting (CDA-9835 only)
OPENING MSG. ON / OPENING MSG. OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from
the device.
You can select whether the opening display is shown or not when
power is turned ON. Choose between the standard display pattern and
the downloaded Profile data display pattern.
This function is only available if you have already downloaded the
profile data.
Setting the AUX Mode (V-Link)
AUX ON / AUX OFF (Initial setting)
OFF mode:This shows the standard display pattern.
ON mode: This shows the downloaded Profile data and the
calendar message after data downloading.
You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-
410C) to this component.
You can change the AUX name display when AUX ON is set. Select
the AUX name by pressing g or f. Then turn the Rotary
encoder.
Switching the Animation Display type (CDA-9835 only)
Type 1 (Initial setting) / Type 2 / Type 3 / Type 4 / Type 5
You can select your favorite animation display from five types of
Pattern1 or Pattern2 in “Switching the Display modes” (page 7).
If the KCA-410C is connected, it is possible to select two AUX
names.
•
Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/POWER to select AUX
mode and then press BAND/TEL. to select your desired device.
26-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an External Amplifier
POWER-IC ON (Initial setting) / POWER-IC OFF
XM Radio (Optional)
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
SOURCE/
POWER
BAND/
TEL.
POWER-IC OFF : Use this mode when the front and rear pre-
amplifier of the unit are used to drive an external amplifier
connected to the speakers. In this setting, the head unit’s
internal amplifier has no output to drive speakers.
8
SEARCH
TITLE
Front
left
Amplifier
Front
right
Rear
left
Preset buttons
(1 through 6)
Rotary
encoder
g MENU f
9
Amplifier
Rear
right
Receiving XM Channels with the XM
Receiver (Optional)
XM Satellite Radio* is the next generation of audio entertainment,
with up to 100 brand-new digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports, news and talk, coast-
to-coast via satellite. For more information, visit XM’s website at
POWER-IC ON : The speakers are driven by the built-in amplifier.
Speakers
SPEAKER
RIGHT FRONT
Front
right
An optional XM Satellite Radio Receiver (TUA-T020XM) and an
optional XM antenna may be connected to the CDA-9835/CDA-9833.
With an XM Receiver connected to the Ai-NET input of the CDA-
9835/CDA-9833, the XM Receiver will be controllable from the
CDA-9835/CDA-9833.
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
•
•
The controls on the CDA-9835/CDA-9833 for XM Receiver
operation are operative only when an XM Receiver is connected.
The XM1, XM2 or XM3 band illuminates when in XM mode.
SPEAKER
LEFT FRONT
Front
left
•
No sound is produced by the system when the power output is set to
OFF.
Press SOURCE/POWER to select XM mode.
1
2
Press BAND/TEL. to select XM1, XM2 or XM3.
Each press changes the band:
Setting the Temperature Display for the
External Amplifier
TEMP °F (Initial setting) / °C
XM1 → XM2 → XM3 → XM1
When a separately sold Amplifier Link compatible amplifier is
connected, you can set how to display its temperature. You can switch
the setting between Fahrenheit and Celsius.
Press 8 or 9 to select desired category.
Holding down 8 or 9 will change categories
continuously.
3
°F : The temperature is displayed in Fahrenheit.
°C : The temperature is displayed in Celsius.
Press g or f to select the desired channel.
Holding down g or f will change channels
continuously.
4
Setting the Tone Defeat for External Devices
INT AUDIO ON / INT AUDIO OFF (Initial setting)
•
When using the optional remote control (RUE-4190), an XM
Channel can be directly called up with the numeric keypad of the
remote control.
When inputting external devices to this unit, turning tone defeat on
will bypass EQ and MX, i.e., sound for external devices is output at
the default setting.
1 While in XM Radio mode, enter the Channel number you
want to call up with the numeric keypad on the remote
control.
2 Press ENTER or + 10/OK on the remote control within 5
seconds to receive the XM Channel.
If the channel number is 3 digits, the XM Channel is
automatically received after the channel number is input.
27-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the XM Radio ID Number
Channel/Category Search Function
You need to provide XM with the unique XM Radio ID number for
You can search for programs by Channel No. or Category.
your XM Radio Receiver in order to subscribe to XM's programming.
Press SEARCH
Channel Search mode or Category Search mode.
in the XM mode to select
1
This number is an 8 character alphanumeric number that is printed on
a label directly on the XM Receiver.
It can also be displayed on the screen of the CDA-9835/CDA-9833 in
the following way.
Channel Search mode:
Turn the Rotary encoder to select the desired
Channel No.* within 10 seconds.
* The Channel No. is selected within the selected Category.
2
While receiving XM1, XM2 or XM3, press g or
f to select channel “0.”
The unit alternately displays “RADIO ID” for 2 seconds,
then the ID number for 10 seconds.
1
Press Rotary encoder to receive the selected
Channel No.
3
While displaying "RADIO ID" as shown above, Blackout
(page 22) and Demonstration (page 26) become
nonfunctional.
•
•
•
Search mode is canceled by pressing and holding SEARCH for
at least 2 seconds in Channel Search mode.
While in Channel Search mode, press 8 or 9 to select the another
Category.
While in Channel Search mode, press SEARCH to switch to the
Category Search mode.
To cancel the ID number display, set the channel to
other than “0.”
2
•
•
You cannot use “O,” “S,”“ I,” or “F” for the ID Number.
You can check your ID number printed on the label on the package
of your XM Satellite Radio Receiver (TUA-T020XM).
Category Search mode:
Storing XM Channel Presets
Turn the Rotary encoder to select the desired
Category within 10 seconds.
2
3
Press BAND/TEL. to select the desired band (XM1,
XM2 or XM3) you want to store.
1
Press Rotary encoder to receive the selected
Category.
After tuning in the desired channel, press and hold,
2
•
Search mode is canceled by pressing and holding SEARCH for
at least 2 seconds in Category Search mode.
for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to
store the channel.
•
While in Category Search mode, press SEARCH to switch to
Channel Search mode.
The selected station is stored.
Repeat the procedure to store up to 5 other
channels onto the same band.
3
Quick Search Function
You can search for all Channels.
•
•
•
To use this procedure for other bands, simply select the band
desired and repeat the procedure.
Press and hold SEARCH
in XM mode to activate Quick Search mode.
for at least 2 seconds
1
A total of 18 channels can be stored in the preset memory (6
channels for each band; XM1, XM2 and XM3).
If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
Turn the Rotary encoder to select the desired
Channel within 10 seconds.
2
The selected Channel is received.
Receiving Stored XM Channels
Press BAND/TEL. to select the desired band (XM1,
XM2 or XM3).
1
XM1 → XM2 → XM3 → XM1
Press the channel preset button that has your
desired satellite channel in memory.
2
28-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Display
Setting the Tuning Method
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM channel. The unit can
display this text information as explained below.
You can set the tuning method. You can select the received stations in
channel no. order or in channel name order (alphabetic order).
Press MENU to select the SETUP mode.
1
In XM mode, press TITLE
.
Press g or f to select “CH SELECT.”
2
3
Each time you press this button, the display changes as shown
below.
Turn the Rotary encoder to set the tuning
method.
CDA-9835 *1
CH NO. :
Set in order of channel no.
→
→
→
ALPHABET : Set in alphabetic order.
Channel Number
TIME/CALENDAR DISPLAY
Music Title
Category
Channel Name
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
4
→
→
Channel Number
Channel Number
Channel Number
2
*
Artist Name
Auxiliary Data Field
→
→
Channel Number
Channel Number
•
When the setting is completed, switch the channel DOWN/UP by
3
pressing the g or f.
EXTERNAL AMPLIFIER INFORMATION*
→
Channel Number
Channel Number
Setting the Auxiliary Data Field Display
CDA-9833
The XM Auxiliary Data Field (ADF) display can be switched on or
off.
Category
Channel Name
Music Title
Music Title
→
→
→
Channel Name
Artist Name
2
*
Channel Name
Channel Name
Clock
Press MENU to select the SETUP mode.
1
→
→
Auxiliary Data Field
Select “XM ADF” by pressing g or f.
2
3
Channel Name
EXTERNAL AMPLIFIER INFORMATION*
Category
→
3
Channel Name
Select ON/OFF by turning the Rotary encoder.
*1 The display example for the normal display mode is described. The
display changes depending on the display indication pattern. (See
"Switching the Display modes" on page 7)
When setting to ON, Auxiliary Data Field is displayed by
pressing TITLE . (Refer to the “Changing the Display”
section on this page.)
*2 When ADF is turned OFF, this information is not displayed (see
“Setting the Auxiliary Data Field Display” on this page).
*3 Only when an external Amplifier Link compatible amplifier is
connected. For details, refer to "Displaying the External Amplifier
Information" (page 23).
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
4
•
When the "Scroll Setting" (page 26) is set to "SCROLL AUTO," the
display scrolls continuously.
When the Scroll Setting is set to "SCROLL MANUAL," the display
scrolls only once after any function is performed (PRESET, BAND,
SEARCH, etc.).
Press and hold TITLE for more than 2 seconds to scroll the
display manually.
•
•
“Channel Number” and “Clock” displays do not scroll.
Depending on the model, the display may differ from the one
shown above.
•
CDA-9833 only:
When displaying the Music Title/Channel Name, the number 6,
described in the section “About the indicator display” (page 21), is
lit. When displaying the Artist Name, the number 4, described in
the section “About the indicator display” (page 21), is lit.
29-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
An outgoing call from a portable telephone is also possible.
However, you cannot perform different operations at the same time
from a portable telephone and CDA-9835/CDA-9833 as
malfunction can result.
MobileHub™ Link
Operation (Optional)
•
•
•
With a junction box connected outgoing, incoming, and sending
history will also be recorded in the portable telephone.
While telephoning, defeat is set to ON. When the call has finished,
the unit returns to your previous setting.
The telephone volume can be adjusted on the CDA-9835/CDA-
9833. The volume you set during the call is memorized, and is
automatically applied again on the next call.
BAND/
TEL.
SEARCH
TITLE
8
:/J
•
While telephoning or receiving incoming calls, press TITLE to
show the Network Operator display for 5 seconds.
Incoming Calls
Press :/J to receive an incoming call.
1
Press BAND/TEL. to finish a call.
Telephone mode will end and return to the original source
mode.
2
f
g MENU
Rotary
encoder
9
Preset buttons
(1 through 6)
F
•
When the Automatic Calling mode is on, you can talk after 3
seconds of receiving the incoming call. (See “Setting the Automatic
Calling” described below.)
About MobileHub™ Link
Connect a separately sold junction box and a portable telephone
(available from Nokia) to control the incoming and outgoing calls of
the portable telephone.
Setting the Automatic Calling
The incoming call can be switched to Automatic Calling or Manual
Caution
Even with hands-free operation, a driver can be distracted during
telephone operation or receiving a call. For the sake of safety,
drivers are requested to refrain from operating the telephone while
driving.
Calling.
Press MENU to select the SETUP mode.
1
For the sake of safety, only incoming calls and Speed-Dial
outgoing calls can be operated.
Select “TELEPHONE” by pressing g or f.
2
Turn the Rotary encoder to change to AUTO or
MANUAL.
•
•
If a portable telephone is connected, its address book, incoming
and outgoing history are downloaded to the junction box.
Please refer to the instruction manual of the junction box.
3
Press MENU to select RETURN.
The unit returns to normal mode.
4
Telephone Mode ON/OFF
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Press and hold BAND/TEL. for at least 2 seconds to
turn on the Telephone mode.
To turn off, press BAND/TEL.
•
•
Press BAND/TEL. during an incoming call to disconnect it.
The initial setting of the factory is MANUAL.
See relevant pages for each item.
•
•
•
•
•
“NO PHONE” is displayed for about 2 seconds, if a portable
telephone is not connected, before entering the telephone mode.
Then the mode returns to the original source mode.
When the portable telephone is taken off the junction box during an
incoming or outgoing call, or during a hands-free call, the call will
be treated as an ordinary one by the portable telephone.
When there is an incoming call while the power of CDA-9835/
CDA-9833 is off, the power of CDA-9835/CDA-9833 will turn on
automatically for a hands-free call.
Even if the power of the portable telephone is off, when CDA-9835/
CDA-9833 is set to Telephone mode, the power of the portable
telephone will be turned on.
Even if the ACC power of the vehicle is turned off (even if the
engine is stopped) during a hands-free call, the call is not
disconnected, and an ordinary call by the portable telephone is
possible.
•
If there is an incoming call during operation (except an outgoing
call or talking), operation mode will end and switch to the
incoming or talking mode.
30-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling by the outgoing/incoming/absent incoming history
Calling
You can place a call to any of the last 999 calls by the outgoing/
incoming/absent incoming history.
Calling by the address book
You can call up the address book registered in the portable telephone
to call from.
Press SEARCH
the History mode.
in Phone Book mode to select
1
2
Press and hold BAND/TEL. for at least 2 seconds.
1
Press 8 or 9 to select outgoing history (display
example:“DIALED”), incoming history (display
example:“RECEIVE” ), absent incoming history
(display example:“MISSED”).
Press SEARCH
A list in alphabetic order is displayed.
to select Phone Book mode.
2
Retrieving an addressee by Alphabetic Sort List
Turn the Rotary encoder, or press g or f to
select the addressee from the outgoing or
incoming history.
3
When displaying the Alphabetic Sort List, turn the
3
Rotary encoder or press g or f to select
the addressee.
Press :/J or the Rotary encoder to place a call.
4
5
Press :/J or Rotary encoder to place a call.
4
5
Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source
mode.
Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source
mode.
•
•
If all telephone numbers and registered names cannot be displayed
at once, press TITLE
to show undisplayed numbers and names.
Retrieving an addressee by Selecting Search (A-Z search)
“NO MEMORY” is displayed if there is no history.
Press 8 or 9 to select an initial letter (A to Z) of the
addressee.
3
SMS (Short Message Service) Operation
You can be informed when you receive a short message.
Turn the Rotary encoder to select the addressee.
4
Press the Rotary encoder to place a call.
5
Receiving a short message
Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source
mode.
6
When a text message is received,“NEW
1
MESSAGE” is indicated on the display.
The contents of the received message can only be read
from the portable phone's display.
•
•
If all telephone numbers and registered names cannot be displayed
at once, press TITLE to show undisplayed numbers and names.
“NO MEMORY” is displayed if nothing is registered in the Phone
Book.
Press any one of the buttons on the unit to cancel
the display.The buttons that are pressed will enter
the mode or will be activated.
2
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone numbers
registered in No. 1 to 9 of the address book.
Press and hold BAND/TEL. for at least 2 seconds.
1
Within 5 seconds, place a call by pressing and
holding the desired preset button (1 through 6)
for at least 2 seconds.
2
By pressing F, and then pressing a preset button
(1 through 3) for at least 2 seconds, you can
place a call to the number registered in 7 to 9.
•
•
You can place a call by pressing :/J after momentarily pressing
the preset button (1 through 6) of the number you wish to call.
You can place a call by pressing the Rotary encoder, after selecting
a number which you wish to call, by pressing g or f , or by
turning the Rotary encoder.
Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source
mode.
3
•
If there is no telephone number registered to a preset button, “NO
PRESET” is displayed when you try to place a call.
31-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play CD-
ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
Changer (Optional)
SOURCE/
BAND/TEL.
POWER
-/J
Press SOURCE/POWER to switch to the MP3
Changer mode.
1
Press any one of the disc select buttons (1
through 6) corresponding to one of the discs
2
loaded in the CD Changer.
To pause playback, press -/J.
Pressing -/J again will resume playback.
3
F
Select buttons (1 through 6)
•
•
The unit can play discs containing both audio data and MP3 data.
For operating MP3 with an MP3 compatible CD Changer, refer to
“CD/MP3/WMA” pages 9 to 13.
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this
unit if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400C (Multi-Changer Switching device) or the KCA-
410C (Versatile Link Terminal) multiple changers can be controlled
by this unit.
Multi-Changer Selection (Optional)
Alpine's Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2 Switching devices,
you can connect up to 6 CD Changers. When using KCA-410C
(Versatile Link Terminal), you can connect two changers and two
external outputs (AUX).
See “Multi-Changer Selection” on this page for selecting the CD
Changers.
•
•
The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
The DVD changer (optional) is controllable from this unit as well
as the CD changer.
Press SOURCE/POWER on this unit to activate
the CD Changer mode.
1
Alternatively, press SOURCE on the remote control (RUE-
4187) to activate the CD Changer mode.
Press SOURCE/POWER to activate the CHANGER
mode.
1
The display shows the disc number and track number.
•
•
The source indicator varies depending on the connected source.
Press BAND/TEL. to switch the Disc mode in the CD/Changer
mode.
BAND
SOURCE
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
2
The selected disc number appears in the display and CD
playback starts.
Press BAND/TEL. on this unit or the RUE-4187 to
activate the CD Changer Selection mode.
The CD Changer Selection mode remains active for 8
seconds.
2
3
•
•
•
After selecting the desired disc, you can operate in the same way as
for the CD player of this unit.
For details, please see the CD/MP3/WMA section.
If the M.I.X., REPEAT or SCAN mode is activated (the “FUNC”
indicator for the CDA-9833 model is illuminated), the disc select
buttons become nonfunctional.
Press BAND/TEL. until the desired CD Changer
indicator appears on the display.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is the
same as for the 6-disc CD Changer. To select discs
numbered from 7 to 12, first press F to choose the disc
select mode (7 to 12). Then press the desired preset
button. The preset buttons 1 to 6 will represent discs 7 to
12 respectively.
Alternatively press BAND/TEL. on the Remote Control until
the desired changer indicator appears on the display.
If the selected CD Changer is not connected, the display will show
“NO CHANGER.”
To operate the selected changer, see “CD/MP3/WMA” (page 9).
For further details about the external input (AUX) when using
KCA-410C, see “Setting the AUX Mode (V-Link)” on page 26.
•
•
32-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9
!
f UP Button
Radio mode: SEEK (UP) button
CD mode: Press this button to advance to the beginning
of the next track.
Remote Control
9 Button
1
2
Radio mode: Pressing this button will select, in
descending order, stations programmed into the radio's
presets as shown below.
5
6
7
8
9
!
6 → 5 ... 1 → 6
CD Changer mode: DISC Select (DN) button
Press this button to select a disc in descending order.
3
4
MP3/WMA mode: Folder or Playlist Select (DN) button
Press this button to select the folder or playlist.
"
#
"
#
Mute Button
Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.
Audio Processor Button
Each press of the button changes the audio processor
mode.
For details, refer to "Operating the Audio Processor" as
shown below.
Controls on Remote Control
1
2
3
Power Button
Press this button to turn the power on/off.
Press the button to call the external audio processor
mode when the external audio processor is connected.*1
Source Button
Press this button to select the audio source.
*1 For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.
-/J Button
Press this button to switch between the Play and Pause
modes for CD.
Operating the Audio Processor
4
5
TILT 98 Buttons
Press this button to adjust the angle of the movable
display.
Press A.PROC to select the mode.
1
Normal mode → EQ mode (Equalizer Presets) → Time
Correction mode (Recalling the Stored Time Correction) →
Crossover mode (Recalling the Stored Crossover) → Normal
mode
Band/Program Button
Radio mode: BAND Button
Press this button and the band will change.
Press 8 or 9 to select the item.
CD/Changer mode: To switch the disc mode.
2
EQ mode:
6
7
Volume Adjustment Buttons
To increase the volume level:
Press the L button
Select from FLAT, ROCK, POPS, NEWS and USER'S 1 to 6.
Time Correction mode/Crossover mode:
Select from MEMORY 1 through 6.
To decrease the volume level:
Press the K button
8 Button
Radio mode: Pressing this button will select, in ascending
order, stations programmed into the radio's presets as
shown below.
1 → 2 ... 6 → 1
CD Changer mode: DISC Select (UP) button
Press this button to select a disc in ascending order.
MP3/WMA mode: Folder or Playlist Select (UP) button
Press this button to select the folder or playlist.
8
g DN Button
Radio mode: SEEK (DN) Button
CD mode: Press this button to go back to the beginning of
the current track.
33-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Replacement
Applicable battery: Use two “AAA” sized dry batteries or equivalent.
Information
In Case of Difficulty
Opening the battery cover
Slide out the battery cover while firmly pressing in the
1
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items in
the following checklist. This guide will help you isolate the problem
if the unit is at fault. Otherwise, make sure the rest of your system is
properly connected or consult your authorized Alpine dealer.
direction of the arrow.
Basic
No function or display.
•
Vehicle's ignition is off.
- If connected following instructions, the unit will not
operate with the vehicle's ignition off.
Improper power lead connections.
- Check power lead connections.
Blown fuse.
Replacing the battery
Insert the batteries, observing the polarities as illustrated.
2
•
•
- Check the fuse on the battery lead of the unit; replace with
the proper value if necessary.
•
Internal micro-computer malfunctioned due to interference
noise etc.
- Press the RESET switch with a ballpoint pen or other
pointed article.
Closing the cover
Slide the cover as illustrated until a click is heard.
3
Radio
Unable to receive stations.
•
No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
•
You are in a weak signal area.
- Make sure the tuner is in the DX mode.
•
If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace
the antenna with a new one.
Point the remote control transmitter at the remote control
sensor.
•
Remote control sensor
Broadcast is noisy.
•
The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
The antenna is poorly grounded.
•
- Make sure the antenna is grounded properly at its mounting
location.
34-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
NO DISC
CD Player/Changer not functioning.
Out of operating temperature range +50˚C (+120˚F) for CD.
- Allow the vehicle's interior (or trunk) temperature to cool.
•
•
No CD is inserted.
- Insert a CD.
Although a disc is inserted, “NO DISC” is displayed and the
unit does not start to play or eject the disc.
- Remove the disc by following these steps:
1) Press the c button.
•
CD playback sound is wavering.
•
Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about
1 hour).
The movable display will open.
2) Press the c button again for at least 2 seconds while the
movable display is open.
CD insertion not possible.
•
A CD is already in the CD player.
- Eject the CD and remove it.
•
The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
ERROR
•
Mechanism error.
1) Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
c button again.
Unable to fast forward or backward the CD.
•
The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
If the error indication still does not turn off after pressing
the c button for a few times, consult your Alpine dealer.
CD playback sound skips due to vibration.
•
•
•
•
Improper mounting of the unit.
- Securely re-mount the unit.
The disc is very dirty.
- Clean the disc.
The disc has scratches.
- Change the disc.
The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc. Consult
your nearest ALPINE dealer.
•
When “ERROR” is displayed:
If the disc cannot be ejected by pressing c, press the RESET
switch (refer to page 6) and press c again.
If the disc still cannot be ejected, consult your Alpine dealer.
PROTECT
•
•
A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
CD playback sound skips without vibration.
•
The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
UNSUPPORT
The disc is not written in a MP3/WMA supported format.
- Use a disc written at the MP3/WMA supported format.
Error displays (built-in CD player only)
•
Mechanical error
- Press c. After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest ALPINE dealer.
CD-R/CD-RW playback not possible
•
Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
MP3/WMA
MP3 or WMA is not played back.
•
Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA” (page 12-13), then rewrite in
the format supported by this device.
Indication for CD Player
HIGH-TEMP
•
Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
35-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Indication for CD Changer
Indication for XM Radio Mode
HIGH-TEMP
ANTENNA
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
•
•
The XM antenna is not connected to the XM radio module.
- Check whether the XM antenna cable is attached securely to
the XM radio module.
ERROR - 01
UPDATING
•
Malfunction in the CD Changer.
Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
NO SIGNAL
•
•
Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not
eject, consult your Alpine dealer.
•
•
•
XM signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
ERROR - 02
LOADING
A disc is left inside the CD Changer.
Radio is acquiring audio or program information.
- Wait until the radio has received the information.
- Press the eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
OFF AIR
NO MAGAZINE
The channel currently selected has stopped broadcasting.
- Select another channel.
•
•
No magazine is loaded into the CD Changer.
- Insert a magazine.
– – – – – –
NO DISC
•
•
The user has selected a channel number that does not exist or
is not subscribed to.
- The unit will revert back to the previously selected channel.
There is no artist name/feature, song/program title, or
additional information associated with the channel at that time.
- No action needed.
No indicated disc.
- Choose another disc.
36-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL
Power Requirement
Specifications
14.4 V DC
(11–16 V allowable)
26 W RMS × 4*
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
87.7 – 107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
Power Output
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
80 dB
45 dB
2.0 dB
Maximum Pre-Output Voltage 4 V/10 k ohms
Weight
1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE
Width
Height
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
178 mm (7")
50 mm (2")
152 mm (6")
530 – 1,710 kHz
22.5 µV/27 dB
Depth
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
NOSEPIECE SIZE
Width
Height
5 – 20,000 Hz ( 1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
170 mm (6-11/16")
46 mm (1-13/16")
18 mm (11/16")
Depth
Signal-to-Noise Ratio
Channel Separation
•
Due to continuous product improvement, specifications and design
are subject to change without notice.
85 dB (at 1 kHz)
PICKUP
Wave length
795 nm
Laser power
CLASS I
REMOTE CONTROL
Battery Type
Width
Height
Depth
AAA batteries (2 pcs.)
42 mm (1-21/32")
121 mm (4-25/32")
23 mm (29/32")
Weight
50 g (1.8 oz)
37-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 3 to 5 of this manual thoroughly
for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire’s insulation from
being cut by the metal edge of the hole.
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
Precautions
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.
•
•
•
Be sure to disconnect the cable from the (–) battery post before
installing your CDA-9835/CDA-9833. This will reduce any
chance of damage to the unit in case of a short-circuit.
Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for
this unit. When connecting the CDA-9835/CDA-9833 to the
fuse box, make sure the fuse for the intended circuit of the
CDA-9835/CDA-9833 has the appropriate amperage. Failure
to do so may result in damage to the unit and/or the vehicle.
When in doubt, consult your ALPINE dealer.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury.
If swallowed, consult a physician immediately.
•
•
The CDA-9835/CDA-9833 uses female RCA-type jacks for
connection to other units (e.g. amplifier) having RCA
connectors. You may need an adaptor to connect other units. If
so, please contact your authorized ALPINE dealer for
assistance.
Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables
to each other or to the vehicle body.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
SERIAL NUMBER:
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
38-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect each input lead coming from an amplifier
or equalizer to the corresponding output lead
coming from the left rear of the CDA-9835/CDA-
9833. Connect all other leads of the CDA-9835/CDA-
9833 according to details described in the
CONNECTlONS section.
Installation
Metal plate
Detachable
Front panel
3
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
Lock Pin
Caution
Do not block the unit’s fan or heat sink, thus preventing air
circulation. If blocked, heat will accumulate inside the unit and
may cause a fire.
Slide the CDA-9835/CDA-9833 into the dashboard.
When the unit is in place, make sure the locking
pins are fully seated in the down position.This can
be done by pressing firmly in on the unit while
pushing the locking pin down with a small
Air ventilation hole
screwdriver.This ensures that the unit is properly
locked and will not accidentally come out from the
dashboard. Install the detachable front panel.
(Rear of CDA-9835/CDA-9833)
Removal
1 Remove the detachable front panel.
1
Mounting Sleeve
(Included)
2 Use a small screwdriver (or similar tool) to push the
locking pins to the “up” position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.
Dashboard
3 Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
this unit
Slide the mounting sleeve into the dashboard.
2
Face Plate
Screw
Hex Nut (M5)
2
*
Bolt Stud
Screws (M5 × 8)
(Included)
Metal
Mounting
Strap
this unit
1
*
Ground Lead
3
*
this unit
Ground Lead
Chassis
Mounting Bracket
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle's chassis.
•
Secure the ground lead of the unit to a clean metal spot using a
screw (*3) already attached to the vehicle's chassis.
•
For the screw marked “*2”, use an appropriate screw for the
chosen mounting location.
39-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
1
2
To amplifier
Antenna
Blue
POWER ANT
3
4
5
To power antenna
REMOTE
TURN-ON
Blue/White
To amplifier or equalizer
To vehicle phone
AUDIO
INTERRUPT IN
Pink/Black
Orange ILLUMINATION
6
To the instrument cluster illumination
lead
IGNITION
BATTERY
Red
7
8
Ignition Key
Yellow
!
Black
GND
9
Battery
Gray
#
$
Speakers
SPEAKER
RIGHT FRONT
Front right
Gray/Black
Violet/Black
%
&
SPEAKER
RIGHT REAR
/
.
,
<
Rear right
Violet
Green
(
)
"
F/R Sub-W
SPEAKER
LEFT REAR
X-OVER
Rear left
Front left
3WAY
EQ/DIV
Green/Black
White/Black
∗1
=
~
+
SPEAKER
LEFT FRONT
Ai-NET
NORM
White
∗1
-
CD Changer
(Sold Separately)
Speakers
Front Left
;
Amplifier
Front Right
Rear Left
;
:
Amplifier
Rear Right
>
;
Subwoofers
Amplifier
* 1 The label is attached on the bottom of the unit.
40-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Amplifier Link Connector
&
(
)
~
+
,
Right Rear (+) Speaker Output Lead (Violet)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Outputs Amplifier Link control signals. Connect this to a
separately sold Amplifier Link-compatible amplifier, using
the (also separately sold) Amplifier Link box KCE-510M.
2
3
Antenna Receptacle
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, etc.) equipped with Ai-NET.
This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.
You can input TV/video sound by connecting an optional Ai-
NET/RCA Interface cable (KCA-121B) to this component.
-
.
Ai-NET Cable (Included with CD Changer)
4
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Front Output RCA Connectors
RED is right and WHITE is left.
5
6
Audio Interrupt In Lead (Pink/Black)
/
:
Rear Output RCA Connectors
RED is right and WHITE is left.
Illumination Lead (Orange)
This lead may be connected to the vehicle's instrument
cluster illumination lead. This will allow the backlighting of
the unit to dim whenever the vehicle's lights are turned on.
Subwoofer RCA Connectors
RED is right and WHITE is left.
;
<
RCA Extension Cable (sold separately)
7
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
Setting the 3WAY/2 WAY switch
Set the 3way/2way switch according to your audio system.
=
System Switch
When connecting a processor or divider using Ai-NET, place
this switch in the EQ/DIV position. When no device is
connected, leave the switch in the NORM position.
8
9
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
Be sure to turn the power off to the unit before changing the
switch position.
Ground Lead (Black)
>
DC/DC Converter (CDA-9835 only)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
•
Do not install the converter at a location subjected to water such
as under the floor mat or air conditioner. This may cause a
malfunction.
!
Choke Coil with Fuse Holder
(15A)
•
•
Do not bundle the DC/DC converter cable with other audio cables.
Doing so may induce noise into your system.
Keep the DC/DC converter away from the Antenna cables and the
rear side of the unit, otherwise noise may be generated when
receiving radio broadcast.
"
#
$
%
Power Supply Connector
Right Front (+) Speaker Output Lead (Gray)
Right Front (–) Speaker Output Lead (Gray/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
41-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
The X-Over Switch position for a three-way system whose
frequency range is divided among the highs (Front), mids
(Rear), and lows (Subwoofer).
The X-Over Switch position for a two-way system
(frequency range is divided between highs for front/rear and
lows for the Subwoofer).
The position of the X-Over switch : F/R/Sub-W
The position of the X-Over switch: 3WAY
Front high range
speaker (R)
Front high range
speaker (L)
High range
speaker (R)
High range
speaker (L)
Rear high range
speaker (R)
Rear high range
speaker (L)
Mid range
speaker (R)
Mid range
speaker (L)
Low range
speaker (R)
Low range
speaker (L)
Low range
speaker (L)
Low range
speaker (R)
Output of this unit :
Front output
Rear output
SUB-W output
•
•
•
Use the SUB-W output cord to connect the unit to the low range speaker.
You can use the built-in amplifier to output the front output/rear output.
You cannot adjust the fader when set to 3WAY.
To prevent noise/interference in the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
42-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality
craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any
questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.
2 You should provide a detailed description of the
[PRODUCTS COVERED:
problem(s) for which service is required.
3 You must supply proof of your purchase of the product.
4 You must package the product securely to avoid
damage during shipment.
This Warranty covers Car Audio/Visual Products and
Related Accessories ("the product"). Products purchased in
the Canada are covered only in the Canada. Products
purchased in the U.S.A. are covered only in the U.S.A.
[HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR
USE AND MERCHANTABILITY ARE LIMITED IN
DURATION TO THE PERIOD OF THE EXPRESS
WARRANTY SET FORTH ABOVE AND NO PERSON IS
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE OF THE
PRODUCT.
[LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the
first consumer purchase.
[LIFETIME TAPE HEAD WARRANTY:
All Alpine Car Audio analog tape heads excluding Video
tape heads are warranted for life against manufacturing
defects causing failure.
[WHO IS COVERED:
[HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES
CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL
DAMAGES" REFERS TO EXPENSES OF
This Warranty only covers the original purchaser of the
product, who must reside in the United States, Puerto Rico
or Canada.
[WHAT IS COVERED:
This Warranty covers defects in materials or workmanship
(parts and labor) in the product.
TRANSPORTING THE PRODUCT TO THE ALPINE
SERVICE CENTER, LOSS OF THE ORIGINAL
PURCHASER'S TIME, LOSS OF THE USE OF THE
PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF
THE PRODUCT. THE TERM "CONSEQUENTIAL
DAMAGES" REFERS TO THE COST OF REPAIRING OR
REPLACING OTHER PROPERTY WHICH IS DAMAGED
WHEN THIS PRODUCT DOES NOT WORK PROPERLY.
THE REMEDIES PROVIDED UNDER THIS WARRANTY
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
[WHAT IS NOT COVERED:
This Warranty does not cover the following:
1 Damage occurring during shipment of the product to
Alpine for repair (claims must be presented to the
carrier).
2 Damage caused by accident, abuse, negligence,
misuse, improper connections, improper operation or
failure to follow instructions contained in the Owner's
manual.
3 Damage caused by act of God, including without
limitation, earthquake, fire, flood, storms or other acts of
nature.
4 Any cost or expense related to the removal or
reinstallation of the product.
5 Service performed by an unauthorized person, company
or association.
6 Any product which has the serial number defaced,
altered or removed.
7 Any product which has been adjusted, altered or
modified without Alpine's consent.
8 Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
9 Any product not purchased from an Authorized Alpine
Dealer.
[HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may
also have other rights which vary form state to state and
province to province. In addition, some states/provinces do
not allow limitations on how long an implied warranty lasts,
and some do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly,
limitations as to these matters contained herein may not
apply to you.
[IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio
product has been installed in your vehicle by an Authorized
Installation Center, and this warranty stamped upon
installation by the installation center.
! Any product that has been determined to contain an
excessive amount of dust or dirt and any product that
contains other contaminants including liquid or foreign
objects.
[HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
[HOW TO OBTAIN WARRANTY SERVICE:
1 You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair
and for payment of any initial shipping charges. Alpine
will, at its option, repair or replace the product with a
new or reconditioned product without charge. If the
repairs are covered by the warranty, and if the product
was shipped to an Authorized Alpine Service Center or
Alpine, Alpine will pay the return shipping charges.
U.S.A.
CANADA
1-800-ALPINE-1 (1-800-257-4631)
1-800-ALPINE-1 (1-800-257-4631)
Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada
Download from Www.Somanuals.com. All Manuals Search And Download.
|