Addonics Technologies Computer Drive ZESAES256 User Manual

T E C H N O L O G I E S  
User Guide  
Cipher Z-Drive Enclosure  
(ZESAES256 / ZSAES256EU)  
v3.1.11  
Technical Support  
If you need any assistance to get your unit functioning properly, please have your  
product information ready and contact Addonics Technical Support at:  
Hours: 8:30 am - 6:00 pm PST  
Phone: 408-453-6212  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Back  
Fan  
Switch  
CipherChain  
CipherChain  
Power Connector  
Cipher  
eSATA  
(to host)  
PWR  
HDD  
RESET  
eSATA Port  
Power LED  
HDD LED  
CipherChain  
Cipher  
eSATA  
(to host)  
PWR  
HDD  
RESET  
Cipher Keyhole  
Reset Switch  
How to operate the Cipher Z-Drive Enclosure:  
Note: Hot swapping refers to the ability to plug and unplug the component without  
rebooting.  
1. Insert the AES 256-bit cipher key into the cipher keyhole on the Cipher Z-Drive  
Enclosure.  
2. Power on the device.  
3. Observe that the green Power LED should light up. If it does not, re-insert the  
cipher key and re-power the device or reset the Cipher Z-Drive Enclosure.  
4. For new drive, go to the operating system’s management utility to partition, format  
and mount the encrypted drive.  
Note: You may remove the cipher key from the Cipher Z-Drive Enclosure once it is  
powered on. All the files being transferred into the drive are still encrypted even if the  
cipher key is removed. Always keep a spare master key in a safe place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support (M-F 8:30am - 6:00pm PST)  
Phone: 408-453-6212  
Reset switch  
Under certain applications, the RESET button enables the connecting and  
disconnecting of the Cipher Z-Drive Enclosure without restarting the system.  
Following are examples of such applications:  
a. When the cipher key is removed from the Z-Drive Enclosure, pressing the  
reset switch will clear the key code and remove the drive icon. This is good for  
security when the Z-Drive Enclosure is left unattended.  
b. Likewise when the Z-Drive Enclosure is connected and powered on with a  
cipher key, pressing the RESET button will initialize the drive. Note that if the hard  
drive is not encrypted or if the cipher key does not match with what is on the  
encrypted hard drive, it will show up as an unallocated drive under the drive  
management screen and no drive icon will show up on the My Computer folder.  
It’s very important to make sure that the correct cipher key is used on the hard  
drive. Proceeding to initialize the hard drive will erase all the data beyond  
any possibility of recovery.  
Green Power LED  
In order for the green power LED of the CipherChain mounted on the Cipher  
Z-Drive Enclosure to turn on, the cipher key must be inserted prior to powering or  
resetting the Cipher Z-Drive Enclosure. If the power LED does not light up, the  
computer will not detect the hard drive connected to the Cipher Z-Drive  
Enclosure.  
Yellow Power LED  
Lights up when there is drive activity.  
CONTACT US  
Phone:  
Fax:  
408-573-8580  
408-573-8588  
Email:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Switch NJ220 User Manual
3M VCR MTA 2 User Manual
Acer Network Card ISDN P10 User Manual
Acu Rite Thermometer 3168 User Manual
Aiwa CD Player AM C75 User Manual
AMX Computer Monitor i EquipmentMonitor User Manual
Bakers Pride Oven Oven EP 2 2828 User Manual
BC Speakers Speaker System DE 700 User Manual
Beko Clothes Dryer OIF 22300 User Manual
BK Stereo Amplifier PT 3 series II User Manual