Addonics Technologies Computer Drive ADSA2 User Manual

ADDONICS TECHNOLOGIES  
Model: ADSA2  
Installation Guide  
Angled View  
SATA  
Port 2  
ADSA2 Windows Driver Installation  
Note:  
If you are only configuring independent drives using  
the host controller all you need to install is the  
driver.  
SATA  
Port 1  
1. Connect the SATA host controller to an available PCI  
slot.  
2. Turn computer ON. When Windows boots up, the  
“Found New Hardware Wizard” pops on the screen and  
the Silicon Image SiI 3512 SoftRaid Controller is  
identified.  
3. Place the Driver Disk on your optical drive. Select  
automatically look for driver on the wizard.  
4. Wait while the wizard installs the software…  
5. After driver installation, it is recommended to restart  
your system.  
Hard Drive Activity  
LED Jumper  
connections  
SATARAID Management Utility Installation  
Note:  
If you are configuring RAID sets, in addition to  
installing the driver, you need to install the  
SATARAID Management Utility to configure and  
monitor the RAID sets. Install the utility from the CD  
that came with your package FIRST before  
installing the SATA host controller.  
Side View  
1. Turn computer ON. Insert Driver Disk into CDROM.  
2. The Addonics Technologies Driver Disk window pops  
up.  
3. Select SATA RAID Utilities. To download the utility  
select model of the controller from the list.  
4. Extract the files into your system.  
5. Install the Java Runtime Environment software by  
clicking the jre-1_5_0_05-windows-i586-p.exe. Follow  
the instructions.  
6. Install the SATARAID software by clicking Java  
SATARaid.exe. Follow the instructions.  
7. After software installation, turn your system off.  
8. Follow the ADSA Windows Driver installation.  
The SATARAID Utility Manual can found in the Driver Disk  
under User Guides or can be downloaded from  
ntroller/SATARaid-Manual_v1.03.pdf  
Types of Bus Slots  
Confirming Serial ATA Driver Installation  
1. Right click the My Computer icon and select Properties.  
2. Click Device Manager in the Menu Tree.  
3. Click the “+” sign in front of SCSI and RAID Controllers.  
You should see Silicon Image SiI 3512 SoftRaid  
Controller.  
PCI  
PCI  
TECHNICAL SUPPORT  
Email:  
Internet:  
Technical Support (8:30 am to 6:00 pm PST)  
Phone:  
Email:  
408 433-3855  
Note:  
The ADSA2 SATA 2-Port RAID Controller connects  
to a PCI Bus slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Aastra Telecom Cordless Telephone DT390 User Manual
Acer Computer Drive NAS 700 User Manual
Acu Rite Clock Radio 120610 User Manual
ADIC Life Jacket FileServ Version 441601363 User Manual
ADTRAN Network Card NetVanta T1 FT1 User Manual
Aiphone Intercom System ACC 3 A User Manual
AKG Acoustics Microphone C 3000B User Manual
Allied Telesis Switch PC4KVM User Manual
Axis Communications Security Camera P5532 User Manual
Bacharach Fitness Electronics 19 7037 User Manual