Addonics Technologies Computer Accessories AEUDMACF User Manual

ADDONICS TECHNOLOGIES

Model: AEUDMACF, AEUDMACFWP (read-only)

ADDONICS TECHNOLOGIES

Model: AEUDMACF, AEUDMACFWP (read-only)

4-Pin Molex

40-Pin IDE

Connector

40-Pin IDE

Connector

Power Connector

Power & drive

activity LED

Master or Slave

Setting

Power & drive

activity LED

Master or Slave

Setting

CF/MD Slot

Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.

Step 2 Connect a 4-pin Molex power cable from the PC power supply to

the 4-pin Molex power connector on the IDE-CF Adapter PRO.

Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set

jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =

Slave)

Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set

jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =

Slave)

Step 4 Connect 40-pin IDE connector to IDE controller on motherboard

using IDE flat cable.

Note:

The IDE-CF Adapter PRO supports hot swap.

TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)

Phone:

Email:

408 453-6212

Phone:

Email:

408 453-6212

Download from Www.Somanuals.com. All Manuals Search And Download.