Acer Projector
P5206/N216/PN-X14/S5201/T111/PS-
X11/S5201B/T111E/PS-X11K/
S5301WB/T121E/PS-W11K Series
User's Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Information for Your Safety and
Comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
•
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
•
•
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
•
•
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.6 meters (15 feet) maximum length.
Download from Www.Somanuals.com. All Manuals Search And Download.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
•
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
Do not look into the projector's lens when the lamp is on. The bright light
may hurt your eyes.
•
•
Turn on the projector first and then signal sources.
Do not place the product in the following environments:
•
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector are necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shorten the life span and darken the image.
•
•
•
Locations near fire alarms.
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
•
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
•
•
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
•
Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to stop
before turning main power off.
•
•
Do not touch the air outlet grille and bottom plate which become hot.
Clean the air filter frequently. The temperature inside may rise and cause
damage when the filter/ventilation slots are clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
•
•
•
•
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
•
•
•
•
•
•
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when warning messages display.
When changing the lamp, please allow the projector to cool down, and
follow all changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen Display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
•
•
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
"Lamp(s) contain Mercury,
Dispose Properly."
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
information, check www.lamprecycle.org
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
First Thing First
Usage Notes
Do:
•
•
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
•
•
Block the slots and openings on the projector provided for ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
When changing the lamp, please allow the projector to cool down, and follow all
changing instructions.
•
•
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
Reset the "Lamp Hour Reset" function from the Onscreen Display "Management"
menu after replacing the lamp module.
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Get a Preferred Image Size by Adjusting
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Product Features
This product is a single-chip DLP® projector, including the following
outstanding features:
•
•
DLP® technology
P5206/N216/PN-X14/S5201/T111/PS-X11/S5201B/T111E/PS-X11K: Native 1024
x 768 XGA resolution
Auto / 4:3 / 16:9 aspect ratio supported
S5301WB/T121E/PS-W11K: Native 1280 x 800 WXGA resolution
Auto / Full / 4:3 / 16:9 / L.Box aspect ratio supported
•
•
•
•
•
•
Acer ColorBoost technology delivers vivid, life-like images
High brightness and contrast ratio
Versatile display modes enable optimum performance in any situation
NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported
Lower power consumption and economy (ECO) mode extends lamp life
Acer EcoProjeciton Technology delivers Intelligent power management
approach and physical efficiency improvement
•
Empowering Key reveals Acer Empowering Technology functions (Acer
eView, eTimer, eOpening, ePower Management) for easy adjustment of
settings
•
•
•
•
•
Advanced keystone correction delivers optimum presentations
Multi-language Onscreen Display (OSD) menus
Full-function remote control
P5206/N216/PN-X14: Manual focus projection lens zooms up to 1.3X
2X digital zoom and pan move function
•
•
•
•
•
Microsoft® Windows® 2000, XP, 7, Vista® OS compliant
LAN settings enable remote management of projectors via a web browser
Enables projecting 3D content via DLP Link technology
Acer Color Safe technology ensures consistent color rendition over time
Smart detection delivers quick, intelligent source detection
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Package Overview
This projector comes with all the items shown below. Check to make sure you
have them all. Contact your dealer immediately if any thing is missing.
Projector with lens cap
Composite video cable
Remote control
Power cord
VGA cable
Security card
User’s guide (CD-ROM)
Acer Projector
Quick Start Guide
Quick start guide
Battery x 2
Acer Projector Gateway
Quick Start Guide
Acer Projector Gateway (CD-
ROM) (for S5201B/T111E/PS-
X11K/S5301WB/T121E/PS-
W11K)
Acer Projector Gateway
quick start guide (for
S5201B/T111E/PS-X11K/
S5301WB/T121E/PS-W11K)
Carrying case
Dust filter
(Optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Projector Overview
Projector Outlook
Front / upper side
(S5201/T111/PS-X11/S5201B/T111E/
PS-X11K/S5301WB/T121E/PS-W11K)
(P5206/N216/PN-X14)
5
5
1
1
6
7
7
2
3
2
3
8
8
4
4
#
Description
#
Description
Control panel
1
Power key and Power indicator
LED
5
2
3
4
Projection lens
Elevator button
Lens cap
6
7
8
Zoom ring
Focus ring
Remote control receiver
Rear side
(P5206/N216/PN-X14/S5201/T111/
PS-X11/)
(S5201B/T111E/PS-X11K/S5301WB/
T121E/PS-W11K)
1 23
4
5 6
7
8
9 10 11
12 3
4
6
7
8
9 10 11
15
DC OUT
1213
14 12
#
1
2
3
Description
Remote control receiver
USB connector (Type mini B)
LAN (RJ45 port for 10/100M
Ethernet)
HDMI connector
USB connector (Type A)
RS232 connector
#
9
Description
S-Video input connector/
Composite video input connector
10 Audio input connector/
Audio output connector
11 Microphone input connector
12 Tilt adjusting wheel
13 Power socket
4
5
6
7
Monitor loop-through output
connector
14 12V DC output connector
8
PC analog signal/HDTV/component 15 Kensington™ lock port
video input connector (VGA IN 1/
VGA IN 2)
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Control Panel
1
2
3
7
8
4
9
5
6
10
4
#
Function
Description
1
LAMP
Lamp indicator LED
2
3
POWER
Power key
Power indicator LED
Refer to the "Turning the Projector On/
4
5
Keystone
MENU
Adjusts image distortion caused by tilting
projection (±40 degrees).
•
Launches the Onscreen Display (OSD)
menu, returns to the previous step for
the OSD menu operation or exits the
OSD menu.
•
Confirms your selection of items.
6
RESYNC
TEMP
Automatically synchronizes the projector
to the input source.
7
8
Temp indicator LED
Empowering key
Enables unique Acer functions: eView,
eTimer, eOpening, ePower Management.
9
Four directional select keys
Selects items or makes adjustments to your
selection.
10 SOURCE
Chooses RGB, component video, S-Video,
composite video, HDMI™ or HDTV source.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remote Control Layout
#
Function
Infrared
transmitter
Description
Sends signals to the projector.
1
2
3
4
POWER
To pause the screen image.
FREEZE
RESYNC
Automatically synchronizes the projector to the input
source.
5
6
BACK
Goes back to the previous selection.
Keystone
Adjusts image distortion caused by tilting projection
(±40 degrees).
Four
Selects items or makes adjustments to your selection.
directional
select keys
7
8
Mouse
button
This function is not available with the projector.
Selects the media files in four directions.
Four
directional
select pad
9
VOL +/-
Increases/decreases the volume.
10 Empowering key
Enables unique Acer functions: eView, eTimer,
eOpening, ePower Management.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
#
Function
Description
11
Rewinds/Plays/Pauses/Stops/Fast-forwards the playing
media files.
Rewind
Play/Pause
Stop
Fast-forward
12 VGA
To change source to VGA. This connector supports
analog RGB, YPbPr (480p/576p/720p/1080i/1080p),
and YCbCr (480i/576i).
13 COMPONENT
14 SD/USB A
To change source to Component video. This
connector supports YPbPr.
To change source to SD/USB A. This projector only
supports files in JPEG format. (for S5201B/T111E/PS-
X11K/S5301WB/T121E/PS-W11K)
15 HDMI™/DVI
16 Keypad 0~9
To change source to HDMI™/DVI (for the model with
HDMI™/DVI connector).
Press "0~9" to input a password in the "Setting >
Security" OSD.
17 Laser pointer
window
Shines the laser point light when the Laser button is
pressed.
18 HIDE
Press "HIDE" to hide screen image; press again to
display the image.
19 ASPECT RATIO
20 SOURCE
To choose the desired aspect ratio (Auto/4:3/16:9).
Chooses RGB, component video, S-Video, composite
video, HDMI™, or HDTV source.
21 ZOOM
22 ENTER
Zooms the projector display in or out.
Confirms your selection of items.
23
Emits visible laser pointer light for presentation
purposes. This function is not available for the
projectors sold in the Japanese market.
Laser
24 MENU
Launches the Onscreen Display (OSD) menu, returns
to the previous step for the OSD menu operation or
exits the OSD menu.
25 PAGE ^/v
For computer mode only. Use the button to select the
next or previous page. This function is only available
when connected to a computer via a USB cable.
26 S-VIDEO
27 VIDEO
28 USB B
To change source to S-Video.
To change source to Composite video.
To change source to USB B.
29 LAN/WiFi
To change source to LAN/WiFi. (for LAN/wireless
compatible models)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Getting Started
Connecting the Projector
•
P5206/N216/PN-X14/S5201/T111/PS-X11
VGA
5
DVD player, Set-top box,
HDTV receiver
USB
11
Display
RS232
D-Sub
S-Video/Video Output
R B G
10
2
8
9
W R
D-Sub
RS232
Speakers
R B G
3
6
10
7
5
2
Microphone
HDTV adapter
D-Sub
1
D-Sub
Screen
MIC.
DC OUT
12
4
#
Description
#
Description
1
Power cord
VGA cable
7
RS232 cable
HDMI cable
2
3
8
9
VGA to component video/HDTV
adapter
3 RCA component cable
4
5
6
Composite video cable
Audio cable
10 RJ45 cable
11 USB cable
12 12V DC cable
S-Video cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
•
S5201B/T111E/PS-X11K/S5301WB/T121E/PS-W11K
VGA
5
DVD player, Set-top box,
HDTV receiver
USB
11
Display
RS232
D-Sub
S-Video/Video Output
R B G
10
2
8
9
W R
D-Sub
RS232
Speakers
R B G
3
6
10
7
5
2
Microphone
HDTV adapter
D-Sub
1
D-Sub
Screen
MIC.
DC OUT
13
12
4
#
Description
#
Description
1
2
3
Power cord
VGA cable
8
9
HDMI cable
3 RCA component cable
RJ45 cable
VGA to component video/HDTV
adapter
10
4
5
Composite video cable
Audio cable
11
USB cable
12* USB storage device/USB Wifi adapter
(Optional)
6
7
S-Video cable
RS232 cable
13
12V DC cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Note: "*" USB drive limitation, do not support power.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Turning the Projector On/Off
Turning On the Projector
1
2
Remove the lens cap.
Ensure that the power cord and signal cable are securely connected.
The Power LED will light red.
3
4
Turn on the projector by pressing
remote control, and the Power indicator LED will turn blue.
(POWER) on the control panel or
Turn on your source (computer, notebook, video player, etc.). The
projector will detect your source automatically.
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
•
If you connect to multiple sources at the same time, use "SOURCE" on
the control panel or remote control, or the direct source key on the
remote control to switch between inputs.
2&3
2&3
1
1
Lens cap
Lens cap
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Turning Off the Projector
1
To turn the projector off, press the power button. This message
appears:
"Please press the power button again to complete the shutdown process."
Press the power button again.
2
3
The LED power indicator will turn RED and blink rapidly after the
projector is turned off, and the fan(s) will continue to operate for
about 2 minutes to ensure that the system cools properly.
As long as the power cord remains plugged in, you can press the
power button to turn the projector immediately back on anytime
during the 2-minute shutdown process.
4
5
Once the system has finished cooling, the LED power indicator will
stop blinking and turn solid red to indicate standby mode.
It is now safe to unplug the power cord.
Warning indicators:
•
•
"Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp will automatically turn off, the projector will automatically
shut down, and the LED temp indicator will turn solid red. Contact
your local dealer or service center.
"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED temp indicator will blink. Contact your local dealer or
service center.
Note: Whenever the projector automatically shuts down and
the LED lamp indicator turns solid red, contact your local
reseller or service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Adjusting the Projected Image
Adjusting the Height of the Projected Image
The projector is equipped with an elevator foot for adjusting the image height.
To raise the image:
1
2
Press the elevator button.
Raise the image to the desired height angle, then release the button
to lock the elevator foot into position.
3
Use Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1
2
Press the elevator button.
Lower the image to the desired height angle, then release the button
to lock the elevator foot into position.
3
Use Tilt adjusting wheel to fine-tune the display angle.
1
Elevator
button
3
3
2
Tilt adjusting wheel
Elevator foot
Tilt adjusting wheel
Download from Www.Somanuals.com. All Manuals Search And Download.
12
How to Optimize Image Size and Distance
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen.
•
P5206/N216/PN-X14
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 75" and 98".
Note: Remind as below figure, the space of 161 cm height is
required when the projector is located at 3 m distance.
98"
B
75"
Height:
161 cm
Height:
126 cm
From
base to
top of
image
C
3 m
A
Desired distance
Minimum Screen Size (Min zoom)
From base to
Maximum Screen Size (Max zoom)
From base to
Desired
Distance
(m)
Diagonal
Diagonal
top of image
(cm)
top of image
(cm)
(inch) W (cm) x H (cm)
< B >
(inch) W (cm) x H (cm)
< B >
< A >
< C >
< C >
1
1.5
2
25
38
51 x 38
76 x 57
41
33
49
66 x 50
54
62
99 x 75
80
50
102 x 76
82
65
132 x 99
106
133
161
187
213
241
267
321
374
428
480
534
588
641
2.5
3
63
127 x 95
152 x 114
178 x 133
203 x 152
228 x 171
254 x 190
305 x 228
355 x 266
406 x 305
457 x 343
508 x 381
558 x 419
609 x 457
103
123
144
164
185
205
246
287
329
370
411
452
493
81
166 x 124
199 x 149
232 x 174
265 x 199
298 x 224
331 x 248
397 x 298
464 x 348
530 x 397
596 x 447
662 x 497
728 x 546
795 x 596
75
98
3.5
4
88
114
130
147
163
196
228
261
293
326
359
391
100
113
125
150
175
201
226
251
276
301
4.5
5
6
7
8
9
10
11
12
Zoom Ratio: 1.3 x
Download from Www.Somanuals.com. All Manuals Search And Download.
13
•
S5201/T111/PS-X11/S5201B/T111E/PS-X11K
If the projector is 2 m from the screen, good image quality is possible for image
sizes around 161".
Note: Remind as below figure, the space of 320 cm height is
required when located at 2 m distance.
161"
B
Height:
320 cm
From
base to
top of
image
2 m
C
Desired distance
A
Screen Size
Desired
Distance
(m)
From base to
top of image
(cm)
Diagonal
(inch) W (cm) x H (cm)
< B >
< A >
< C >
0.5
0.8
1.1
1.4
1.7
2
40
82 x 61
80
65
131 x 98
128
176
224
272
320
368
416
464
511
591
89
180 x 135
230 x 172
279 x 209
328 x 246
377 x 283
426 x 320
475 x 357
525 x 393
607 x 455
113
137
161
186
210
234
258
299
2.3
2.6
2.9
3.2
3.7
Zoom Ratio: 1.0 x
Download from Www.Somanuals.com. All Manuals Search And Download.
14
•
S5301WB/T121E/PS-W11K
If the projector is 2 m from the screen, good image quality is possible for image
sizes around 189".
Note: Remind as below figure, the space of 281 cm height is
required when located at 2 m distance.
189"
B
Height:
281 cm
From
base to
top of
image
2 m
C
Desired distance
A
Screen Size
Desired
Distance
(m)
From base to
top of image
(cm)
Diagonal
(inch) W (cm) x H (cm)
< B >
< A >
< C >
0.5
0.6
0.7
0.8
0.9
1
47
57
102 x 64
122 x 77
70
84
66
143 x 89
98
76
163 x 102
184 x 115
204 x 128
306 x 191
408 x 255
510 x 319
612 x 383
714 x 446
112
126
140
210
281
351
421
491
85
95
1.5
2
142
189
237
284
332
2.5
3
3.5
Zoom Ratio: 1.0 x
Download from Www.Somanuals.com. All Manuals Search And Download.
15
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
•
P5206/N216/PN-X14
To obtain an image size of 50" set the projector at a distance between 1.5 m
and 2.0 m from the screen and adjust the zoom level accordingly.
A
D
50"
Desired
image size
Height:
82 cm
From base
to top of
image
B
1.5 m
Desired distance
2.0 m
C
Desired Image Size
Distance (m)
Top (cm)
Diagonal (inch)
< A >
Max zoom
< B >
Min zoom
< C >
From base to top of
image < D >
W (cm) x H (cm)
30
61 x 46
81 x 61
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
4.8
6.0
7.2
8.0
10.0
49
66
40
1.2
1.5
1.8
2.1
2.5
2.8
3.1
3.7
4.6
5.5
6.1
7.7
9.2
50
102 x 76
122 x 91
142 x 107
163 x 122
183 x 137
203 x 152
244 x 183
305 x 229
366 x 274
406 x 305
508 x 381
610 x 457
82
60
98
70
115
131
147
164
197
246
295
328
410
491
80
90
100
120
150
180
200
250
300
Zoom Ratio: 1.3 x
Download from Www.Somanuals.com. All Manuals Search And Download.
16
•
S5201/T111/PS-X11/S5201B/T111E/PS-X11K
To obtain an image size of 50" set the projector at a distance 0.6 m from the
screen.
A
D
50"
Desired
image size
Height:
99 cm
From
base to
top of
image
B& C
0.6 m
Desired distance
Desired Image Size
Distance (m)
Top (cm)
Diagonal (inch)
Max zoom
Min zoom
< C >
From base to top of
image < D >
W (cm) x H (cm)
< A >
< B >
0.4
0.5
0.6
0.7
0.9
1.0
1.1
1.2
1.5
1.9
2.2
2.5
3.1
3.7
30
61 x 46
81 x 61
0.4
0.5
0.6
0.7
0.9
1.0
1.1
1.2
1.5
1.9
2.2
2.5
3.1
3.7
59
40
79
50
102 x 76
122 x 91
142 x 107
163 x 122
183 x 137
203 x 152
244 x 183
305 x 229
366 x 274
406 x 305
508 x 381
610 x 457
99
60
119
139
158
178
198
238
297
357
396
495
594
70
80
90
100
120
150
180
200
250
300
Zoom Ratio: 1.0 x
Download from Www.Somanuals.com. All Manuals Search And Download.
17
•
S5301WB/T121E/PS-W11K
To obtain an image size of 50" set the projector at a distance 0.5 m from the
screen.
A
D
50"
Desired
image size
Height:
74 cm
From
base to
top of
image
B& C
0.5 m
Desired distance
Desired Image Size
Distance (m)
Top (cm)
Diagonal (inch)
Max zoom
Min zoom
< C >
From base to top of
image < D >
W (cm) x H (cm)
< A >
< B >
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.1
1.3
1.6
1.9
2.1
2.6
3.2
30
65 x 40
86 x 54
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.1
1.3
1.6
1.9
2.1
2.6
3.2
44
59
40
50
108 x 67
129 x 81
151 x 94
172 x 108
194 x 121
215 x 135
258 x 162
323 x 202
388 x 242
431 x 269
538 x 337
646 x 404
74
60
89
70
104
118
133
148
178
222
267
296
370
444
80
90
100
120
150
180
200
250
300
Zoom Ratio: 1.0 x
Download from Www.Somanuals.com. All Manuals Search And Download.
18
User Controls
Installation Menu
The installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No
signal input" is displayed on the screen.
1
Turn on the projector by pressing
remote control.
(POWER) on the control panel or
2
Press "MENU" on the control panel or remote control to launch the
OSD for projector installation and maintenance.
3
4
The background pattern acts as a guide to adjust the calibration and
alignment settings, such as screen size and distance, focus and more.
The Installation menu includes the following options:
•
•
•
•
•
•
Projection method
Menu location
Keystone settings
Language settings
LAN settings
Reset to factory default functions
Use the up and down arrow keys to select an option, the left and right arrow keys to
adjust selected option settings, and the right arrow key to enter a submenu for
feature setting. The new settings will be saved automatically upon exiting the menu.
5
Press "MENU" anytime to exit the menu and return to the Acer
welcome screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Acer Empowering Technology
Acer Empowering Key provides three
Acer unique functions: "Acer eView
Management", "Acer eTimer
Empowering Key
Management", "Acer eOpening
Management" and "Acer ePower
Management". Press " " for more
than one second to launch the
Onscreen Display main menu to modify
its function.
Acer eView Management
Press " " to launch "Acer eView
Management".
"Acer eView Management" is for
display mode selection. Please refer to
the "Onscreen Display (OSD) Menus"
section for more details.
(S5201/T111/PS-X11/
S5201B/T111E/PS-X11K/
(P5206/N216/PN-X14)
S5301WB/T121E/PS-
W11K)
The 3D and 3D Sync Invert functions
offer quick access of 3D functions here.
Acer eTimer Management
Press " " to launch "Acer eTimer
Management".
"Acer eTimer Management" provides
the reminding function for
presentation time control. Please refer
to the "Onscreen Display (OSD) Menus"
section for more details.
Acer eOpening Management
Acer ePower Management
Press " " to launch "Acer eOpening
Management".
"Acer eOpening Management" allows
users to change the Startup Screen to
their personalized image. Please refer
to the "Onscreen Display (OSD) Menus"
section for more details.
Press " " to launch "Acer ePower
Management".
"Acer ePower Management"provides
you one shortcut to save the lamp and
projector’s life. Please refer to the
"Onscreen Display (OSD) Menus"
section for more details.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the control panel or remote
control.
•
When the OSD is displayed, use
to select an item in the main menu.
After selecting the desired main menu item, press
for feature setting.
to enter a submenu
•
Use
to select the desired item and adjust the settings by using
.
•
•
•
Select the next item to be adjusted in the submenu and adjust as described
above.
Press "MENU" on the control panel or remote control, the screen will
return to the main menu.
To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
new settings.
Main menu
Setting
Submenu
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Color
There are many factory presets optimized for various types
of images.
•
•
Bright: For brightness optimization.
Presentation: For meeting presentation with higher
brightness.
•
•
•
Standard: For common environment.
Display Mode
Video: For playing video in a bright environment.
Education: For education environment. (for S5201/
T111/PS-X11/S5201B/T111E/PS-X11K/S5301WB/T121E/
PS-W11K)
•
User: Memorize user’s settings.
Use this function to choose a proper color according to the
wall. There are several choices, including white, light
yellow, light blue, pink, dark green. It will compensate the
color deviation due to the wall color to show the correct
image tone.
Wall Color
Brightness
Adjusts the brightness of the image.
•
•
Press
Press
to darken the image.
to lighten the image.
Controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast
changes the amount of black and white in the image.
Contrast
•
•
Press
Press
to decrease the contrast.
to increase the contrast.
Adjusts the color temperature. At higher color
temperatures, the screen looks colder; at lower color
temperatures, the screen looks warmer.
Color
Temperature
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Effects the representation of dark scenery. With greater
gamma value, dark scenery will look brighter.
Degamma
Color R
Color G
Color B
Adjusts the red color.
Adjusts the green color.
Adjusts the blue color.
Adjusts a video image from black and white to fully
saturated colors.
•
•
Press
image.
to decrease the amount of color in the
to increase the amount of color in the
Saturation
Press
image.
Adjusts the color balance of red and green.
•
Press
image.
to increase the amount of green in the
Tint
•
Press
to increase the amount of red in the image.
Adjusts the color range of the HDMI image data to prevent
color display error.
•
•
•
Auto: Automatically adjusts the color range by
information from the player.
HDMI Color
Range
Limited Range: Processes the input image as limited
color range data.
Full Range: Processes the input image as full color
range data.
Note: "Saturation" and "Tint" functions are not supported under
computer, or HDMI (PC) mode.
Note: "HDMI Color Range" is only available when the input signal is HDMI.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Image
•
•
Front-Desktop: The factory default setting.
Front-Ceiling: When you select this function, the
projector inverts the image for ceiling-mounted
projection.
•
•
Rear-Desktop: When you select this function, the
projector reverses the image so that you can project
behind a translucent screen.
Projection
Rear-Ceiling: When you select this function, the
projector reverses and inverts the image at same time.
You can project from behind a translucent screen with
ceiling mounted projection.
Use this function to choose your desired aspect ratio.
•
Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
•
•
•
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
Aspect Ratio
16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
Full (for S5301WB/T121E/PS-W11K): The image will be
displayed making full use of the horizontal and vertical
pixels.
•
L.Box (for S5301WB/T121E/PS-W11K): Keeps the original
signal aspect ratio and zooms in by 1.333 times.
Manually adjusts image distortion caused by tilting projection
(±40 degrees).
Keystone
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Adjusts the sharpness of the image.
•
•
Press
Press
to decrease the sharpness.
to increase the sharpness.
Sharpness
H. Position
(Horizontal
Position)
•
•
Press
Press
to move the image left.
to move the image right.
V. Position
(Vertical
Position)
•
•
Press
Press
to move the image down.
to move the image up.
Changes the projector’s refresh rate to match the frequency
of your computer’s graphics card. If you experience a vertical
flickering bar in the projected image, use this function to
correct it.
Frequency
Tracking
Synchronizes the signal timing of the display with the graphics
card. If you experience an unstable or flickering image, use
this function to correct it.
Adjusts the overscan ratio of the HDMI image on screen.
•
Auto: Automatically adjusts the overscan ratio by
information from the player.
HDMI Scan Info
•
•
Underscan: Always no overscan on the HDMI image.
Overscan: Always keep overscan on the HDMI image.
Choose "On" to enable DLP 3D function.
•
DLP 3D
Select this item while using DLP 3D glasses, quad buffer
(NVIDIA/ATI...) graphics card and HQFS format file or DVD
with corresponding SW player.
3D
•
Off
Turns off 3D mode.
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
match of left/right image sequence to get the correct image
(for DLP 3D).
3D Sync Invert
Choose "On" to display the 3D warning message.
3D Warning
Message
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under video mode.
Note: "Sharpness" function is not supported under computer mode.
Note:
The 3D function is supported by VGA source only. Please see the timing
table for detailed 3D timings.
It needs correct settings on graphics card 3D application program for correct
3D display.
The SW players, such as Stereoscopic Player and DDD TriDef Media Player
can support 3D format files. You can download these players on web page
below.
3D_Drivers_Downloads.html
Experience-4.0.2.html
Note: "3D Sync Invert" is only available when DLP 3D is enabled.
Setting
(P5206/N216/PN-X14/S5201/
T111/PS-X11)
(S5201B/T111E/PS-X11K/
S5301WB/T121E/PS-W11K)
Menu Location
Chooses the OSD menu location on the display screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Use this function to select your desired startup screen. If you
change the setting, it will take effect when you exit the OSD
menu.
Startup Screen
•
•
Acer: The default startup screen of your Acer projector.
User: Use the memorized picture from the "Screen
Capture" function.
Use this function to customize the startup screen. To capture
the image that you want to use as the startup screen, follow
the instructions below.
Notice:
Before proceeding with the following steps, make sure that
the "Keystone" is set to the default value "0", and the
"Aspect Ratio" is set to "4:3". For details, refer to the "Image"
section.
•
Change the "Startup Screen" from the default setting
"Acer" to "User".
•
•
Press "Screen Capture" to customize the startup screen.
A dialog box appears to confirm the action. Choose
"Yes" to use the current image as your customized
startup screen. Choose "No" to cancel the screen capture
and exist the onscreen display (OSD).
•
•
•
A message appears stating that the screen capture is in
progress.
Screen Capture
When the screen capture is finished, the message
disappears and the original display is shown.
The customized startup screen takes effect when there is
a new input signal or when you restart the projector.
Note: This screen capture function is limited by 4:3
aspect ratio only.
Note: For XGA models, to get best quality for your
desired image, it is suggested that you set the PC
resolution to 1024 x 768 before using this function.
Note: For SVGA models, to get best quality for your
desired image, it is suggested that you set the PC
resolution to 800 x 600 before using this function.
Note: For WXGA models, to get best quality for your
desired image, it is suggested that you set the PC
resolution to 1280 x 800 before using this function.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Selects a preferred closed captioning mode from CC1, CC2,
CC3, CC4, (CC1 displays captions in the primary language in
your area). Select "Off" to turn off the captioning feature.
This function is only available when a composite video or S-
Video input signal is selected and its system format is NTSC.
Closed Caption
Set your screen aspect ratio to 4:3. The function is not
available when the aspect ratio is "16:9" or 16:9 format
detected under "Auto mode".
Security
This projector provides a useful security function for the
administrator to manage the projector.
Press
to change the "Security" setting. If the security
function is enabled, your must enter "Administrator
Password" first before changing the security setting.
Security
The factory default of "Administrator Password" is
"1234".
•
•
Select "On" to enable the security function. You have to
enter password depending on the "Security Mode".
Please refer to "User Password" section for details.
If "Off" is selected, you can switch on the projector
without password.
Timeout (Min.)
Once "Security" is set to "On", you can set timeout function.
•
Press
to select timeout duration.
•
•
The range is from 10 to 990 minutes.
When time is up, the projector will request you to enter
the password again.
•
•
The factory default setting of "Timeout (Min.)" is "Off".
Once the security function is enabled, the projector will
request you to enter password when switching on the
projector. Both "User Password" and "Administrator
Password" can be accepted for this dialogue.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
User Password
•
•
Press
to set up or change "User Password".
Use the numerical keys on the remote control to set the
password and press "MENU" to confirm.
•
•
To delete the digits, Press
.
Enter the password again when you see "Confirm
Password" displayed.
•
•
The password should be 4~8 digits in length.
If you select "Request password only after plugging
power cord", you are requested to input the password
every time the power cord is plugged.
•
If you select "Always request password while projector
turns on", you are requested to input the password every
time the projector is turned on.
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box is
displayed.
•
•
Press
to change "Administrator Password".
The factory default of "Administrator Password" is
"1234".
If you forget your administrator password, do the following
to retrieve the administrator password:
•
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
•
If the Security Card is lost, please contact your local Acer
service center.
Lock User Startup Screen
•
The default value is "Off". If it is "On", you cannot
change the startup screen arbitrarily.
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN (or
VGA IN 1) and VGA OUT sockets are correctly connected to the
devices.
VGA OUT
Enabling this function slightly increases the standby
power consumption.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Press
after choosing "Yes" to return the display
Reset
parameters on all menus to the factory default settings.
To connect your projector to the network:
1
2
3
Take a RJ45 cable and connect one end to the LAN input
jack of the projector and the other end to the RJ45 port.
Enter the LAN Setting menu. The "Enter Administrator
Password" dialogue box is displayed.
Enter "Administrator Password". The next level menu
is displayed.
The factory default of "Administrator Password" is
"1234". You can change it in the Setting > Security >
Administrator Password menu.
4
5
Select LAN in this menu and press
Make sure DHCP is on, and press
to select "On".
to select Apply and
press
.
LAN Setting
(for P5206/
N216/PN-X14/
S5201/T111/PS-
X11)
6
Re-enter the menu and note down the IP address
displayed in the row of Projector IP Address.
If your are not in a DHCP environment, set DHCP to "Off" and
contact your ITS administrator for information on Projector IP
Address, Subnet Mask, Default Gateway, and DNS Server.
1
2
Press
Press
to select Projector IP Address and press
to move the cursor and press
.
to
enter the digits.
3
4
When you finish, press MENU to save and exit the menu.
Repeat steps 1-3 to input addresses for Subnet Mask,
Default Gateway, DNS server.
5
Press
to highlight Apply and press
.
To control the projector remotely:
1
Enter the Projector IP address in the address bar of the
web browser on your computer.
2
The remote network operation page is displayed.You can
control the projector by using this page. For details, see
the notes following this table.
LAN Reset
(for P5206/
N216/PN-X14/
S5201/T111/PS-
X11)
Press
after choosing "Yes" to return all items on the Tools
page to the default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
LAN
•
•
•
The default value is "Off". Choose "On" to enable the
LAN connection.
(for S5201B/
T111E/PS-X11K/
S5301WB/
T121E/PS-W11K)
LAN IP/Mask
(for S5201B/
T111E/PS-X11K/
S5301WB/
Identify IP and Mask address.
Reset LAN function.
T121E/PS-W11K)
LAN Reset
(for S5201B/
T111E/PS-X11K/
S5301WB/
T121E/PS-W11K)
The default value is "On". The up/down move of your
electronic screen relates to power on/off of the projector.
Auto Screen
About LAN Setting (for P5206/N216/PN-X14/S5201/T111/PS-X11)
Note 1 : An overview of the remote network operation page
See Note 2 and
Note 3.
To switch
input signals,
click your
desired
These buttons
function the
same as those
on the OSD
menus,
signal.
projector
control panel,
or remote
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Note 2 : An overview of the Tools page
You can
enter the
projector
information.
You can set the
user password/
administrator
password to
prevent
unauthorized use
of the remote
You can
adjust the
LAN control
settings.
network operation/
Tools page.
Note 3: The Info page shows the projector information and status.
Management
Choose "On" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
ECO Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
High Altitude
Auto Shutdown
(Minutes)
The projector will automatically shut down while there is
no signal input detected after the setting time.
Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).
Choose this function to show or hide warning message
Lamp Reminding when the changing lamp message is displayed. The
message will show up 30 hours before end of life.
Press
after choosing "Yes" to turn the lamp hour
Lamp Hour Reset
counter to 0 hours.
Audio
•
•
Press
Press
to decrease the projector speaker volume.
to increase the projector speaker volume.
Volume
•
•
Press
Press
to decrease the microphone volume.
to increase the microphone volume.
Microphone
Volume
•
•
•
Choose "On" to turn mute on.
Choose "Off" to turn mute off.
Mute
Power On/Off
Volume
Select this function to adjust the notification
volume when turning the projector on/off.
•
Select this function to adjust the volume of any
warning notifications.
Alarm Volume
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Timer
Timer Location
Sets the location of the timer on the screen.
Timer Start (or
Stop)
Press
to start or stop the timer.
Timer Period
(Minutes)
Press
to adjust the timer period.
Select this function to adjust the notification volume
when the timer function is enabled and time is up.
Timer Volume
Timer Display
Press
to choose a timer display mode.
Language
Sets a language for the OSD menus. Use
select your preferred language.
to
Language
•
Press
to confirm the selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
Problem
Solution
1
No image appears
onscreen
•
•
•
Make sure all the cables are correctly connected as
described in the "Getting Started" section.
Ensure none of the connector pins are bent or
broken.
Check if the projection lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
2
Partial, scrolling
or incorrectly
displayed image
(For PC (Windows
95/98/2000/XP))
•
•
Press "RESYNC" on the control panel or remote
control.
For an incorrectly displayed image:
•
Open "My Computer > Control Panel," and
then double-click the "Display" icon.
Select the "Settings" tab.
Verify that your display resolution setting is
lower than or equal to UXGA (1600 x 1200).
Click the "Advanced Properties" button.
•
•
•
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
•
•
Verify that the resolution setting is lower than
or equal to UXGA (1600 x 1200).
Click the "Change" button under the
"Monitor" tab.
Click "Show all devices > Standard monitor
types" under the SP box, and choose the
resolution mode you need under the "Models"
box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to UXGA
(1600 x 1200).
Download from Www.Somanuals.com. All Manuals Search And Download.
35
3
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
•
•
Press "RESYNC" on the control panel or remote
control.
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]
•
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
®
®
4
The screen of the
notebook
computer is not
displaying your
presentation
If you are using a Microsoft Windows based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
®
®
•
If you are using an Apple Mac OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On."
5
6
Image is unstable
or flickering
•
•
•
•
Use "Tracking" to correct it. Refer to the "Image"
section for more information.
Change the display color setting on your computer.
Image has vertical
flickering bar
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
7
Image is out of
focus
•
•
•
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 3.9 to 30.2 feet (1.2 to 9.2
meters) from the P5206/N216/PN-X14 projector, 1.6
to 12.2 feet (0.5 to 3.7 meters) from the S5201/T111/
PS-X11/S5201B/T111E/PS-X11K, or 1.6 to 10.4 feet
(0.5 to 3.2 meters) from the S5301WB/T121E/PS-
W11K projector. Refer to the "How to Get a
Zoom" section for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
8
Image is stretched
when displaying a
"widescreen"
DVD title
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play a 4:3 format DVD title, please change the
format to 4:3 with the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
9
Image is too small
or too large
•
•
Adjust the zoom lever on the top of the projector.
Move the projector closer to or further from the
screen.
•
Press "MENU" on the control panel or remote
control. Go to "Image > Aspect Ratio" and try
different settings.
10
Image has slanted
sides
•
•
•
If possible, reposition the projector so that it is
centered on the screen and below the bottom of the
screen.
Press the Keystone correction keys on the control
panel or remote control until the image becomes
square.
Press "MENU" on the control panel or remote
control to open the OSD menu. Go to "Image > Auto
Keystone" or "Image > Manual Keystone" to make
adjustments.
11
Image is reversed
•
Select "Image > Projection" on the OSD and adjust
the projection direction.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
OSD Messages
#
Condition
Message
Message Reminder
1
Fan Fail - the system fan is not working.
Fan Fail.
Lamp will automatically turn off soon.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it is used. Please also check the dust filters if
they are installed. If the dust filter is clogged with dust, please
clean it.
Projector Overheated.
Lamp will automatically turn off soon.
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Lamp is approaching the end of its useful life in full power operation.
Replacement suggested!
Download from Www.Somanuals.com. All Manuals Search And Download.
38
LED & Alarm Definition Listing
LED Messages
Message
Power LED
Blue
Lamp LED
Temp LED
Red
V
Red
--
Red
--
Standby
--
V
(Power cord plugged in)
Power on
--
--
--
--
--
--
Lamp retry
Quick
flashing
Turning off (Cooling
state)
Quick
flashing
--
--
--
--
--
--
V
Turning off (Cooling
completed)
V
Error (Thermal failure)
Error (Fan lock failure)
--
--
V
V
--
--
Quick
flashing
Error (Lamp breakdown)
--
--
V
V
V
--
--
Error (Color wheel
failure)
Quick
flashing
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Replacing the Lamp
Use a screwdriver to remove the screw(s) from the cover, and then pull out the
lamp.
The projector will detect the lamp life itself. It will show you a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement Suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooled down for at least 30
minutes before changing the lamp.
Warning: Lamp compartment is hot! Allow it to cool down before
changing lamp!
9
3
4
1
2
10
5
1
2
1
8
12
6
2
7
11
1
12
To remove the lamp:
1
2
3
4
5
6
7
8
Turn the projector off by pressing
(POWER).
Allow the projector at least 30 mins to cool down.
Disconnect the power cord.
Use a screwdriver to remove the screws from the cover. (Illustration #1)
Push up and remove the cover.
Remove and dispose of the lamp protection film (Illustration #2).
Remove the screw that secures the lamp module (Illustration #3).
Pull out the lamp connector from a slot in the lamp compartment.
Disconnect it from the projector (Illustration #4).
9
Lift the handle so that it stands up (Illustration #5). Pull out the lamp
module by force (Illustration #6).
7
112
To replace the lamp module, use a new lamp and follow illustrations # - #
.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
1
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2
Secure the ceiling rod using the appropriate type of cylinder screws.
Ceiling Mount
Base
- Attach to
ceiling
Short Rod
Long Rod
Extension Rod
Large Cylinder Cap
Allen Key
- For tighten/loosen
Screw Type A
50 mm length / 8 mm diameter -
Tightening Screw
Medium Rod
Download from Www.Somanuals.com. All Manuals Search And Download.
41
3
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Screw Type B
Screw Type C
Sliding Extension
Large Washer
Projector Bracket
Supports projector and
allows for adjustments
Smaller Washer
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4
Attach the ceiling bracket to the ceiling rod.
Tightening Screw
Large Cylinder Cap
Screw Type A
50 mm length -
/8 mm diameter
Allen Key
- For tighten/loosen
Download from Www.Somanuals.com. All Manuals Search And Download.
42
5
Adjust the angle and positioning as necessary.
Tightening Screw
Allen Key
30
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 3 mm diameter screws are enclosed in
the screw pack.
Models
Screw Type B
Washer Type
Diameter (mm)
Length (mm)
25
Large
Small
V
P5206/N216/PN-X14/
S5201/T111/PS-X11/S5201B/
T111E/PS-X11K/S5301WB/
T121E/PS-W11K
3
V
Screw M3
Depth 9.5 mm
242.04 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Specifications
The specifications below are subject to change without notice. For final specs,
please refer to Acer's marketing documentation.
™
Projection system
Resolution
DLP
•
P5206/N216/PN-X14/S5201/T111/PS-X11/S5201B/T111E/
PS-X11K:
Native: XGA (1024 x 768)
Maximum: 1920 x 1080 EIA/RB
•
S5301WB/T121E/PS-W11K:
Native: WXGA (1280 x 800)
Maximum: 1920 x 1080 EIA/RB
Computer compatibility
IBM PC and compatibles, Apple Macintosh, iMac and VESA
standards: WXGA+ (1440 x 900), WXGA (1280 x 800, 1280 x
768), SXGA (1152 x 864, 1280 x 1024), SXGA+ (1400 x 1050),
XGA (1024 x 768), SVGA (800 x 600), VGA (640 x 480), UXGA
(1600 x 1200), 1920 x 1080 EIA/RB
Video compatibility
Aspect ratio
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/K/K1/L),
HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i,
576i)
•
P5206/N216/PN-X14/S5201/T111/PS-X11/S5201B/T111E/
PS-X11K: Auto, 4:3 (native), 16:9
•
S5301WB/T121E/PS-W11K: Auto, Full (native), 16:9, 4:3,
L.Box
Displayable colors
Projection lens
1.07 billion colors
•
P5206/N216/PN-X14:
F = 2.59 - 2.87, f = 16.88 mm - 21.88 mm,
1:1.3 Manual Zoom and Manual Focus
•
S5201/T111/PS-X11/S5201B/T111E/PS-X11K:
F = 2.6, f = 6.90 mm, Manual Focus
S5301WB/T121E/PS-W11K:
F = 2.6, f = 6.90 mm, Manual Focus
•
Projection screen size
(diagonal)
•
•
P5206/N216/PN-X14: 30" (76 cm) - 300" (762 cm)
S5201/T111/PS-X11/S5201B/T111E/PS-X11K: 40" (102 cm)
- 300" (762 cm)
•
•
•
S5301WB/T121E/PS-W11K: 47" (120 cm) - 300" (762 cm)
P5206/N216/PN-X14: 3.9' (1.2 m) - 30.2' (9.2 m)
Projection distance
Throw ratio
S5201/T111/PS-X11/S5201B/T111E/PS-X11K: 1.6' (0.5 m) -
12.2' (3.7 m)
•
•
•
S5301WB/T121E/PS-W11K:1.6' (0.5 m) - 10.4' (3.2 m)
P5206/N216/PN-X14: 65" @ 2 m (1.51 - 1.97 : 1)
S5201/T111/PS-X11/S5201B/T111E/PS-X11K: 77" @ 95 cm
(0.61 : 1)
•
S5301WB/T121E/PS-W11K: 87" @ 92 cm (0.49 : 1)
Horizontal scan rate
31 - 100 kHz
48 - 120 Hz
Vertical refresh scan rate
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Lamp type
•
•
P5206/N216/PN-X14: Philips 300 W user-replaceable UHP
S5201/T111/PS-X11/S5201B/T111E/PS-X11K/S5301WB/
T121E/PS-W11K: Philips 230 W user-replaceable VIP
Keystone correction
Digital zoom
Audio
+/-40 Degrees (Vertical), Manual
2 X
5 W x 2
Weight
•
•
P5206/N216/PN-X14: Approximate 3.25 kg (7.12 lbs.)
S5201/T111/PS-X11/S5201B/T111E/PS-X11K/S5301WB/
T121E/PS-W11K: Approximate 3.5 kg (7.72 lbs.)
Dimensions (W x D x H)
•
•
P5206/N216/PN-X14: 290 x 255 x 125 mm (11.4" x 10.0"
x 4.9")
S5201/T111/PS-X11/S5201B/T111E/PS-X11K/S5301WB/
T121E/PS-W11K: 290 x 254 x 98.5 mm (11.4" x 10.0" x
3.9")
Power supply
Universal AC input 100 - 240 V, input frequency 50/60 Hz
Power consumption
•
•
P5206/N216/PN-X14: 447 W
S5201/T111/PS-X11/S5201B/T111E/PS-X11K/S5301WB/
T121E/PS-W11K: 352 W
Operating temperature
I/O connectors
0ºC to 35ºC / 32ºF to 95ºF
•
•
•
•
•
•
•
•
•
•
•
•
•
Power socket x 1
RS232 x 1
VGA input x 2
VGA output x 1
Composite video x 1
S-Video x 1
3.5 mm audio jack input x 2
3.5 mm audio jack output x 1
HDMI x 2
RJ45 LAN input x 1
USB (Type mini B) x 1
12 V DC output x 1 (Max. 1A)
Microphone input x 1
Below items are for S5201B/T111E/PS-X11K/S5301WB/
T121E/PS-W11K only.
•
USB (Type A) x 2
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Standard package contents
•
•
•
•
•
•
•
•
•
AC power cord x 1
VGA cable x 1
Remote control x 1
Battery x 2 (for the remote control)
User's guide (CD-ROM) x 1
Quick start guide x 1
Security card x 1
Composite video cable x 1
Carrying case x 1
Below items are for S5201B/T111E/PS-X11K/S5301WB/
T121E/PS-W11K only.
•
•
•
Acer Projector Gateway (CD-ROM) x 1
Acer Projector Gateway quick start guide x 1
Dust filter x 1
Accessory (optional)
*Design and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Compatibility Modes
1
VGA Analog - PC Signal
Mode
VGA_60
Resolution
V.Frequency [Hz] H.Frequency [KHz]
640 x 480
59.940
72.809
75.000
85.008
70.087
85.039
56.250
60.317
72.188
75.000
85.061
60.004
70.069
75.029
84.997
70.012
75.000
84.990
60.020
72.000
75.025
85.024
60.000
75.000
59.978
60.000
59.940
66.667
60.317
74.546
60.004
31.469
37.861
37.500
43.269
31.469
37.927
35.156
37.879
48.077
46.875
53.674
48.363
56.476
60.023
68.677
63.851
67.500
77.094
63.981
76.970
79.976
91.146
60.000
75.000
65.317
75.000
31.469
35.000
37.879
49.722
48.363
VGA_72
VGA_75
VGA_85
VGA_70
720 x 400
800 x 600
VGA_85
SVGA_56
SVGA_60
SVGA_72
SVGA_75
SVGA_85
XGA_60
1024 x 768
XGA_70
XGA_75
XGA_85
SXGA_70
SXGA_75
SXGA_85
SXGA_60
SXGA_72
SXGA_75
SXGA_85
QuadVGA_60
QuadVGA_75
SXGA+_60
UXGA_60
Mac G4
1152 x 864
1280 x 1024
1280 x 960
1400 x 1050
1600 x 1200
640 x 480@60Hz
640 x 480@67Hz
800 x 600@60Hz
832 x 624@75Hz
1024 x 768@60Hz
MAC13
Mac G4
MAC16
Mac G4
Download from Www.Somanuals.com. All Manuals Search And Download.
47
MAC19
MAC21
1024 x 768@75Hz
1152 x 870@75Hz
1280 x 768
75.020
75.061
59.870
74.893
84.837
60.000
59.810
119.909
59.887
59.954
60.000
60.000
59.790
60.000
119.518
119.854
119.804
60.241
68.681
47.776
60.289
68.633
45.000
49.702
101.563
55.935
65.290
66.587
67.500
47.712
37.500
61.910
77.425
98.958
WXGA_60
WXGA_75
WXGA_85
WXGA_60
1280 x 720
1280 x 800
WXGA_60
WXGA_120*
WXGA+_60
1680 x 1050_60
1920 x 1080_RB
1920 x 1080_EIA
acer_16:9
1440 x 900
1680 x 1050
1920 x1080
1920 x1080
1366 x 768
1024 x 600
640 x 480
acer_timing
VGA_120
SVGA_120
XGA_120
800 x 600
1024 x 768
•
* (star sign): For S5301WB/T121E/PS-W11K only
2
DVI-D & HDMI (HDCP) Timing
Mode
Resolution
640 x 480
V.Frequency [Hz] H.Frequency [KHz]
VGA_60
VGA_72
VGA_75
VGA_85
VGA_70
VGA_85
SVGA_56
SVGA_60
SVGA_72
SVGA_75
SVGA_85
XGA_60
XGA_70
XGA_75
XGA_85
59.940
72.809
75.000
85.008
70.087
85.039
56.250
60.317
72.188
75.000
85.061
60.004
70.069
75.029
84.997
31.469
37.861
37.500
43.269
31.469
37.927
35.156
37.879
48.077
46.875
53.674
48.363
56.476
60.023
68.677
720 x 400
800 x 600
1024 x 768
Download from Www.Somanuals.com. All Manuals Search And Download.
48
SXGA_70
SXGA_75
SXGA_85
SXGA_60
SXGA_72
SXGA_75
SXGA_85
QuadVGA_60
QuadVGA_75
SXGA+_60
UXGA_60
Mac G4
1152 x 864
70.012
75.000
84.990
60.020
72.000
75.025
85.024
60.000
75.000
59.978
60.000
59.940
66.667
60.317
74.546
60.004
75.020
75.061
59.870
74.893
84.837
60.000
59.810
119.909
59.887
59.954
60.000
60.000
59.790
63.851
67.500
77.094
63.981
76.970
79.976
91.146
60.000
75.000
65.317
75.000
31.469
35.000
37.879
49.722
48.363
60.241
68.681
47.776
60.289
68.633
45.000
49.702
101.563
55.935
65.290
66.587
67.500
47.712
1152 x 864
1280 x 1024
1280 x 960
1400 x 1050
1600 x 1200
640 x 480@60Hz
640 x 480@67Hz
800 x 600@60Hz
832 x 624@75Hz
1024 x 768@60Hz
1024 x 768@75Hz
1152 x 870@75Hz
1280 x 768
MAC13
Mac G4
MAC16
Mac G4
MAC19
MAC21
WXGA_60
WXGA_75
WXGA_85
WXGA_60
WXGA_60
WXGA_120*
WXGA+_60
1680x1050_60
1920x1080_RB
1280 x 720
1280 x 800
1440 x 900
1680 x 1050
1920 x1080
1920 x1080
1366 x 768
1920x1080_EIA
acer_16:9
acer_timing
VGA_120
1024 x 600
640 x 480
800 x 600
1024 x 768
60.000
119.518
119.854
119.804
37.500
61.910
77.425
98.958
SVGA_120
XGA_120
480p
576p
Video (HDMI)
60
50
60
31.47
31.25
45.00
720p_60
Download from Www.Somanuals.com. All Manuals Search And Download.
49
720p_50
1080i_60
1080i_50
1080p
50
60
50
60
37.50
33.75
28.13
67.5
1080P
1080p
1080p
50
24
56.26
27.00
26.97
23.98
•
* (star sign): For S5301WB/T121E/PS-W11K only
3
Component Signal
Mode
480i
Resolution
720 x 480
V.Frequency [Hz]
59.94
H.Frequency [KHz]
15.73
720 x 480
720 x 576
480p
576i
59.94
31.47
50.00
15.63
720 x 576
576p
720p
720p
1080i
1080i
1080p
1080p
1080p
1080p
50.00
31.25
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
60.00
45.00
50.00
37.50
60.00
33.75
50.00
28.13
60.00
67.5
50.00
56.26
24.00
27.00
23.98
26.97
4
Video, S-Video Signal
Video mode
NTSC
V.Frequency [Hz] H.Frequency [KHz]
fsc (MHz)
3.58
60
50
50
60
50
60
60
15.73
15.63
15.63
15.73
15.63
15.73
15.73
PAL
4.43
SECAM
PAL-M
PAL-N
4.25 or 4.41
3.58
3.58
PAL-60
NTSC4.43
4.43
4.43
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries
Acer hereby, declares that this projector series is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact a local office in the country of use.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
Contact Person: Mr. Easy Lai, e-mail:[email protected]
And,
Acer Italy s.r.l
Via Lepetit, 40, 20020 Lainate (MI) Italy
Hereby declare that:
Product:
Projector
Trade Name:
Model Number:
Acer
QNX1017/QNX1020/QNX1021/QWX1026/N216/PN-X14/T111/
PS-X11/T111E/PS-X11K/T121E/PS-W11K series
P5206/S5201/S5201B/S5301WB series
Machine Type:
Is compliant with the essential requirements and other relevant provisions of the following EC
directives, and that all the necessary steps have been taken and are in force to assure that production
units of the same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:
-. EN55022, AS/NZS CISPR22, Class B
-. EN55024
-. EN61000-3-2 Class A
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized
standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in
Electrical and Electronic Equipment
-. The maximum concentration values of the restricted substances by weight in homogenous
material are:
Lead
0.1%
0.1%
Polybrominated Biphenyls (PBB’s)
Polybrominated Diphenyl Ethers (PBDE’s)
Cadmium
0.1%
0.1%
0.01%
Mercury
Hexavalent Chromium 0.1%
Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
The standards listed below are applied to the product if built with WLAN module or wireless
keyboard and mouse.
R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:
•
•
•
Article 3.1(a) Health and Safety
-. EN60950-1
-. EN62311
Article 3.1(b) EMC
-. EN301 489-1
-. EN301 489-17
Article 3.2 Spectrum Usages
-. EN300 328
-. EN301 893 (Applicable to 5GHz high performance RLAN).
Year to begin affixing CE marking 2010.
Dec. 1, 2010 -
Date
Easy Lai /Manager
Regulation Center, Acer Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
QNX1017/QNX1020/QNX1021/
QWX1026/N216/PN-X14/T111/
PS-X11/T111E/PS-X11K/T121E/
PS-W11K
Machine Type:
P5206/S5201/S5201B/S5301WB series
Acer America Corporation
Name of Responsible Party:
Address of Responsible Party:
333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Phone No.:
Fax No.:
Acer Representative
254-298-4000
254-298-4147
Download from Www.Somanuals.com. All Manuals Search And Download.
|