Washer Extractors
HC60, HC65, HC75, HC100
HC135, HC165
for corresponding “CHC” and “IHC” models,
see page 6 for complete model list.
Technical specifications
Installation instructions
Maintenance
Part No. D0285R9
Code: 249/00306/20
May 2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
2
Model Numbers ..............................................................................................6
Safety and Environmental Informations ......................................................8
Safety ..........................................................................................................8
Environmental ..............................................................................................9
Explanation of Safety Messages ...............................................................10
Important Safety Instructions ..................................................................... 11
Operator Safety .........................................................................................13
Technical data and dimensions .................................................................14
Technical data HC60, IHC012, IHC060 .....................................................14
Dimensions HC60, IHC012, IHC060 .........................................................15
Technical data HC65, IHC014, IHC065 .....................................................16
Dimensions HC65, IHC014, IHC065 .........................................................17
Technical data HC75, IHC018, CHC018, IHC075 .....................................18
Dimensions HC75, IHC018, CHC018, IHC075 .........................................19
Technical data HC100, IHC025, CHC025, IHC100 ...................................20
Dimensions HC100, IHC025, CHC025, IHC100 .......................................21
Technical data HC135, IHC030, IHC135 ...................................................22
Dimensions HC135, IHC030, IHC135 .......................................................23
Technical data HC165, IHC035, CHC035, IHC165 ...................................24
Dimensions HC165, IHC035, CHC035, IHC165 .......................................25
Installation and Connection Instructions ..................................................26
Surface ......................................................................................................26
Out of balance switch ................................................................................26
Removal of the transport safety .................................................................27
Mounting Bolt Hole Locations for machines, HC60, IHC012, IHC060 .......28
Mounting Bolt Hole Locations for machines, HC65, IHC014, IHC065 .......29
3
4
Mounting Bolt Hole Locations for machines, HC75, IHC018, CHC018,
IHC075 ......................................................................................................30
Mounting Bolt Hole Locations for machines, HC100, IHC025, CHC025,
IHC100 ......................................................................................................31
Mounting Bolt Hole Locations for machines, HC135, IHC030, IHC135 .....32
Mounting Bolt Hole Locations for machines, HC165, IHC035, CHC035,
IHC165 ......................................................................................................33
Water connection .......................................................................................34
Water drain ................................................................................................34
Electrical Installation ..................................................................................35
Main power connection ..............................................................................37
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Specifications HC60, IHC012, IHC060 ......................................39
Electrical Specifications HC65, IHC014, IHC065 ......................................40
Electrical Specifications HC75, IHC018, CHC018, IHC075 ......................41
Electrical Specifications HC100, IHC025, CHC025, IHC100 ....................42
Electrical Specifications HC135, IHC030, IHC135 ....................................43
Electrical Specifications HC165, IHC035, CHC035, IHC165 ....................44
Liquid soap connection (option) .................................................................45
Connection of a central operating panel for coin machines (option) .........47
5 Steam connection ........................................................................................48
6 Technical remarks .......................................................................................49
Internal connections of the electrical heating ............................................49
7 Maintenance instruction of the machine ...................................................50
End of day ..................................................................................................50
General maintenance ................................................................................50
Periodical maintenance .............................................................................50
Annual maintenance ..................................................................................51
8 Contact Information .....................................................................................52
Nameplate .................................................................................................52
9 Repair and after-sales service ....................................................................54
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Model Numbers
Build-up
xHC060yyHyyyyyy
xHC065yyHyyyyyy
xHC075yyHyyyyyy
xHC100yyHyyyyyy
xHC135yyHyyyyyy
xHC165yyHyyyyyy
xHC012yyHyyyyyy
xHC014yyHyyyyyy
xHC018yyHyyyyyy
xHC025yyHyyyyyy
xHC030yyHyyyyyy
xHC035yyHyyyyyy
HC60
HC65
HC75
HC100
HC135
HC165
HX25
HX35
Model numbers
IHC012ANH
IHC012MNH
IHC012MCH
IHC012MDH
IHC012MEH
IHC012MLH
IHC012MXH
IHC012MYH
IHC012SCH
IHC012SDH
IHC012SEH
IHC012SRH
IHC012SLH
IHC012SXH
IHC012SYH
IHC018ANH
IHC018MNH
IHC018MCH
IHC018MDH
IHC018MEH
IHC018MLH
IHC018MXH
IHC018MYH
IHC018SCH
IHC018SDH
IHC018SEH
IHC018SRH
IHC018SLH
IHC018SXH
IHC018SYH
IHC025ANH
IHC025MNH
IHC025MCH
IHC025MDH
IHC025MEH
IHC025MLH
IHC025MXH
IHC025MYH
IHC025SCH
IHC025SDH
IHC025SEH
IHC025SRH
IHC025SLH
IHC025SXH
IHC025SYH
IHC030ANH
IHC030MNH
IHC030MCH
IHC030MDH
IHC030MEH
IHC030MLH
IHC030MXH
IHC030MYH
IHC030SCH
IHC030SDH
IHC030SEH
IHC030SRH
IHC030SLH
IHC030SXH
IHC030SYH
IHC035ANH
IHC035MNH
IHC035MCH
IHC035MDH
IHC035MEH
IHC035MLH
IHC035MXH
IHC035MYH
IHC035SCH
IHC035SDH
IHC035SEH
IHC035SRH
IHC035SLH
IHC035SXH
IHC035SYH
IHC060ANH
IHC060MNH
IHC060MCH
IHC060MDH
IHC060MEH
IHC060MLH
IHC060MXH
IHC060MYH
IHC060SCH
IHC060SDH
IHC060SEH
IHC060SRH
IHC060SLH
IHC060SXH
IHC060SYH
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1
IHC060ZNH
IHC065ANH
IHC065MNH
IHC065MCH
IHC065MDH
IHC065MEH
IHC065MLH
IHC065MXH
IHC065MYH
IHC065SCH
IHC065SDH
IHC065SEH
IHC065SRH
IHC065SLH
IHC065SXH
IHC065SYH
IHC065ZNH
IHC075ANH
IHC075MNH
IHC075MCH
IHC075MDH
IHC075MEH
IHC075MLH
IHC075MXH
IHC075MYH
IHC075SCH
IHC075SDH
IHC075SEH
IHC075SRH
IHC075SLH
IHC075SXH
IHC075SYH
IHC075ZNH
IHC100ANH
IHC100MNH
IHC100MCH
IHC100MDH
IHC100MEH
IHC100MLH
IHC100MXH
IHC100MYH
IHC100SCH
IHC100SDH
IHC100SEH
IHC100SRH
IHC100SLH
IHC100SXH
IHC100SYH
IHC100ZNH
IHC135ANH
IHC135MNH
IHC135MCH
IHC135MDH
IHC135MEH
IHC135MLH
IHC135MXH
IHC135MYH
IHC135SCH
IHC135SDH
IHC135SEH
IHC135SRH
IHC135SLH
IHC135SXH
IHC135SYH
IHC135ZNH
IHC165ANH
IHC165MNH
IHC165MCH
IHC165MDH
IHC165MEH
IHC165MLH
IHC165MXH
IHC165MYH
IHC165SCH
IHC165SDH
IHC165SEH
IHC165SRH
IHC165SLH
IHC165SXH
IHC165SYH
IHC165ZNH
CHC012ANH
CHC012MNH
CHC018ANH
CHC018MNH
CHC025ANH
CHC025MNH
CHC030ANH
CHC030MNH
CHC035ANH
CHC035MNH
CHC060ANH
CHC060MNH
CHC060MCH
CHC060MDH
CHC060MEH
CHC060MLH
CHC060MXH
CHC060MYH
CHC065ANH
CHC065MNH
CHC065MCH
CHC065MDH
CHC065MEH
CHC065MLH
CHC065MXH
CHC065MYH
CHC075ANH
CHC075MNH
CHC075MCH
CHC075MDH
CHC075MEH
CHC075MLH
CHC075MXH
CHC075MYH
CHC100ANH
CHC100MNH
CHC100MCH
CHC100MDH
CHC100MEH
CHC100MLH
CHC100MXH
CHC100MYH
CHC135ANH
CHC135MNH
CHC135MCH
CHC135MDH
CHC135MEH
CHC135MLH
CHC135MXH
CHC135MYH
CHC165ANH
CHC165MNH
CHC165MCH
CHC165MDH
CHC165MEH
CHC165MLH
CHC165MXH
CHC165MYH
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Safety and Environmental Informations
Safety
CAUTION LABELS
Please familiarize yourself with the following standard warning symbols. They are
used throughout this manual and on the equipment to alert you to possible hazards.
Anyone operating or servicing this equipment must understand these symbols and
must follow all safety rules in this manual.
ELECTRICAL HAZARD
This symbol alerts you to the presence of a dangerous voltage, which could cause a
serious shock resulting in personal injury or death.
CONSULT MANUAL
This symbol warns you to consult the manual for important instructions concerning
the machine and possible hazards.
MOVING PARTS HAZARD
This symbol alerts you to the presence of possible dangerous moving parts within
the machine. Guards should always be in place when the machine is in operation. Be
very careful when servicing the drive system.
PINCHING HAZARD
This warning symbol indicates the presence of a pinch point on the machine. This is
a place where your hand might be pinched or crushed, resulting in a severe injury.
Make sure you understand these hazards and keep all body parts clear of them.
HOT SURFACE HAZARD
This symbol indicates the presence of a potentially hot surface. Some machine
surfaces and parts may become extremely hot during normal operation and should
not be touched.
ATTENTION
This symbol identifies information about practices or circumstances that can lead to
personal injury or death, property damage, or economic loss.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Environmental
Disposal of Unit
This appliance is marked according to the European directive 2002/96/
EC on Waste Electrical and Electronic Equipment (WEEE).
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Ensuring this product is disposed
of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local
distributor resources.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Explanation of Safety Messages
Throughout this manual and on machine decals, you will find precautionary statements (“DANGER,”
“WARNING,” and “CAUTION”) followed by specific instructions. These precautions are intended for the
personal safety of the operator, user, servicer, and those maintaining the machine.
DANGER
Indicates an imminently hazardous situation that, if not
avoided, will cause severe personal injury or death.
WARNING
Indicates a hazardous situation that, if not avoided, could
cause severe personal injury or death.
CAUTION
Indicates a hazardous situation that, if not avoided, may
cause minor or moderate personal injury or property
damage.
Safety Decals
Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could
result in injury to the operator or service technician.
To provide personal safety and keep the machine in proper working order, follow all maintenance and
safety procedures presented in this manual. If questions regarding safety arise, contact the manufacturer
immediately.
Use manufacturer-authorized spare parts to avoid safety hazards.
Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where
minor machine damage will occur if the procedure is not followed.
NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing
information that is important but not hazard related.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Important Safety Instructions
WARNING
To reduce the risk of fire, electric shock, serious injury or
death to persons when using your washer, follow these
basic precautions:
1. Read all instructions before using the washer.
2. Refer to the GROUNDING INSTRUCTIONS in the installation Manual for the proper grounding of the
washer.
3. Do not wash textiles that have been previously cleaned, washed, soaked, or spotted with gasoline,
dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could
ignite or explode.
4. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash
water. These substances give off vapors that could ignite or explode.
5. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been
used for such a period, before using a washing machine or combination washer-dryer, turn on all hot
water faucets and let the water flow from each for several minutes. This will release any accumulated
hydrogen gas. The gas is flammable, do not smoke or use an open flame during this time.
6. Do not allow children to play on or in the washer. This appliance is not intended for use by young
children or infirm persons without supervision. Young children should be supervised to ensure that
they do not play with the appliance.
7. Before the washer is removed from service or discarded, remove the door to the washing
compartment.
8. Do not reach into the washer if the wash drum is moving. This is an imminently hazardous situation
that, if not avoided, will cause severe personal injury or death.
9. Do not install or store the washer where it will be exposed to water and/or weather.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the washer, or attempt any servicing unless specifically
recommended in the user-maintenance instructions or in published user-repair instructions that the
user understands and has the skills to carry out.
12. To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect
the washer to an electrical power source.
13. Use a washer only for its intended purpose, washing textiles.
14. ALWAYS disconnect the washer from the electrical supply before attempting any service. Disconnect
the power cord by grasping the plug, not the cord.
15. Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain,
electrical power and grounding must comply with local codes and be made by licensed personnel
when required.
16. To reduce the risk of fire, textiles which have traces of any flammable substances such as vegetable
oil, cooking oil, machine oil, flammable chemicals, thinner, etc., or anything containing wax or
chemicals such as in mops and cleaning cloths, must not be put into the washer. These flammable
substances may cause the fabric to catch on fire.
17. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of
the fabric softener or product.
18. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this
occurs, have washer checked by a qualified service person.
19. Replace worn power cords and/or loose plugs.
20. Be sure water connections have a shut-off valve and that fill hose connections are tight. CLOSE the
shut-off valves at the end of each wash day.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2
21. Loading door MUST BE CLOSED any time the washer is to fill, tumble, or spin. DO NOT bypass the
loading door switch by permitting the washer to operate with the loading door open.
22. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all
warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of the reach
of children at all times (preferably in a locked cabinet).
23. Always follow the fabric care instructions supplied by the textile manufacturer.
24. Never operate the washer with any guards and/or panels removed.
25. DO NOT operate the washer with missing or broken parts.
26. DO NOT bypass any safety devices.
27. Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions
may result in conditions which can produce bodily injury and/or property damage.
28. It is recommended that the machine be installed by qualified technicians.
29. Before starting repairs or maintenance, shut off all power and water supplies.
30. To prevent fire and explosion:
Keep the area around the machine free from inflammable or combustible products.
NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not
meant to cover all possible conditions and situations that may occur. Common sense, caution, and
care must be exercised when installing, maintaining, or operating the washer.
Any problems or conditions not understood should be reported to the dealer, distributor, service agent, or
the manufacturer.
SAVE THESE INSTRUCTIONS
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Operator Safety
WARNING
NEVER insert hands or objects into basket until it has
completely stopped. Doing so could result in serious
injury.
To ensure the safety of machine operators, the following maintenance checks must be performed daily:
1. Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible
signs must be replaced immediately. Make certain that spares are available.
2. Check door interlock before starting operation of the machine:
a. Attempt to start the machine with the door open. The machine should not start with the door open.
b. Close and lock the door and start a cycle. Attempt to open the door while the cycle is in progress.
The door should not open.
If the door lock and interlock are not functioning properly, call a service technician.
3. Do not attempt to operate the machine if any of the following conditions are present:
a. The door does not remain securely locked during the entire cycle.
b. Excessively high water level is evident.
c. Machine is not connected to a properly grounded circuit.
Do not bypass any safety devices in the machine.
WARNING
Never operate the machine with a bypassed or
disconnected balance system. Operating the machine
with severe out-of-balance loads could result in personal
injury and serious equipment damage.
SAVE THESE INSTRUCTIONS
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Technical data and dimensions
Technical data HC60, IHC012, IHC060
METRIC
US
Capacity (dry weight) Ratio [kg/Lit]
1:11
5 kg
11.02 lb.
12.13 lb.
13.45 lb.
1:10
5,5 kg
6,1 kg
1:9
Cylinder
Diameter
Depth
530 mm
250 mm
55 Lit
20.87 inch
9.84 inch
1.94 ft³
Volume
Cabinet
Height
1038 mm
660 mm
575 mm
40.87 inch
25.98 inch
22.64 inch
Width
Depth
Front loading
Diameter door opening
300 mm
279 mm
505 mm
11.81 inch
10.98 inch
19.88 inch
Height under door
To center
Speed
Wash
10 - 50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250 - 1250 tr/min - RPM
G-factor
High spin
462
Dynamic bottom load (N/Hz)
Motor (3-phase)
Drain valve
570/16
4p. 1470 tr/min
Hard, soft, warm water
0,55 kW / 0,74 HP
2"
Water supply
Heating
3/4"
Electrical 230/400 V
4,2 kW
Electrical 400V
6 kW
Steam
X
X
X
Warm water (without additional heating)
Warm water (with additional heating)
Packing dimensions
Weight
(H x W x D) mm - inch
1140x740x840 mm - 44.88x29.13x33.07 inch
Net
184 kg
198 kg
405.65 lb.
436.52 lb.
Gross
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Dimensions HC60, IHC012, IHC060
Legend: metric mm [inches]
163 [6.4]
33 [1.3]
33 [1.3]
30 [1.18]
30 [1.18]
65 [2.56]
530 [20.87]
660 [25.98]
65 [2.56]
485 [19.09]
565 [22.24]
622 [24.49]
69 [2.72]
226 [8.9]
151 [5.94]
75 [2.95]
A
D
B
F
C
E
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G
I
J
J
109 [4.3]
G.Electrical connections
I. Ventilation tub
J. Bolt pattern for fixation of the machine
K. Drain valve
K
J
J
180 [7.09]
15
660 [25.98]
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Technical data HC65, IHC014, IHC065
METRIC
US
Capacity (dry weight) Ratio [kg/Lit]
1:11
5,9 kg
6,5 kg
7,2 kg
13.01 lb.
14.33 lb.
15.87 lb
1:10
1:9
Cylinder
Cabinet
Diameter
Depth
530 mm
295 mm
65 Lit
20.87 inch
11.61 inch
2.30 ft³
Volume
Height
Width
Depth
1038 mm
660 mm
739 mm
40.87 inch
25.98 inch
29.09 inch
Front loading
Diameter door opening
Height under door
To center
300 mm
279 mm
505 mm
11.81 inch
10.98 inch
19.88 inch
Speed
Wash
10 - 50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250 - 1000 tr/min - RPM
G-factor
High spin
296
Dynamic bottom load (N/Hz)
Motor (3-phase)
Drain valve
570/16
4p. 1470 tr/min
0,75 kW / 1,01 HP
2"
Water supply
Hard, soft, warm water
Steam connection
3/4"
3/8"
Steam connection
Heating
Electrical 230/400 V
4,2 kW - 6 kW - 9 kW
Electrical 400V
12 kW
Steam
X
X
X
Warm water (without additional heating)
Warm water (with additional heating)
Packing dimensions
Weight
(H x W x D) mm - inch
1140x740x840 mm - 44.88x29.13x33.07 inch
Net
207 kg
229 kg
456.36 lb.
504.86 Ib.
Gross
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Dimensions HC65, IHC014, IHC065
Legend: metric mm [inches]
220 [8.66]
30 [1.18]
30 [1.18]
33 [1.3]
33 [1.3]
590
[23.23]
65 [2.56]
530 [20.87]
660 [25.98]
65 [2.56]
670
[26.38]
69 [2.72]
727 [28.62]
226 [8.9]
151 [5.94]
75 [2.95]
A
D
B
F
C
E
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G
I
109 [4.3]
L
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
K
180 [7.09]
660 [25.98]
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Technical data HC75, IHC018, CHC018, IHC075
METRIC
US
Capacity (dry weight) Ratio [kg/Lit]
1:11
6,9 kg
7,6 kg
8,4 kg
15.21 lb.
16.76 lb.
18.52 lb.
1:10
1:9
Cylinder
Diameter
530 mm
345 mm
76 Lit
20.87 inch
13.58 inch
2.68 ft³
Depth
Volume
Cabinet
Height
1038 mm
660 mm
739 mm
40.87 inch
25.98 inch
29.09 inch
Width
Depth
Front loading
Diameter door opening
Height under door
To center
300 mm
279 mm
505 mm
11.81 inch
10.98 inch
19.88 inch
Speed
Wash
10 - 50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250 - 1000 tr/min - RPM
G-factor
High spin
296
Dynamic bottom load (N/Hz)
550/16
Motor (3-phase)
4p. 1470 tr/min
Drain valve
0,75 kW / 1,01 HP
2"
Water supply
Hard, soft, warm water
Steam connection
Steam connection
Heating
3/4"
3/8"
Electrical 230/400 V
Electrical 400V
Steam
4,2 kW - 6 kW - 9 kW
12 kW
X
X
X
Warm water (without additional heating)
Warm water (with additional heating)
Packing dimensions
Weight
(H x W x D) mm - inch
1140x740x840 mm - 44.88x29.13x33.07 inch
Net
211 kg
233 kg
465.18 lb.
513.68 lb.
Gross
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Dimensions HC75, IHC018, CHC018, IHC075
Legend: metric mm [inches]
220 [8.66]
30 [1.18]
30 [1.18]
33 [1.3]
33 [1.3]
590
[23.23]
65 [2.56]
530 [20.87]
660 [25.98]
65 [2.56]
670
[26.38]
69 [2.72]
727 [28.62]
226 [8.9]
151 [5.94]
75 [2.95]
A
D
B
F
C
E
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G
I
109 [4.3]
L
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
K
180 [7.09]
660 [25.98]
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Technical data HC100, IHC025, CHC025, IHC100
METRIC
US
Capacity (dry weight) Ratio [kg/Lit]
1:11
8,6 kg
9,5 kg
18.96 lb.
20.94 lb.
23.15 lb.
1:10
1:9
10,5 kg
Cylinder
Diameter
530 mm
440 mm
95 Lit
20.87 inch
17.32 inch
3.35 ft³
Depth
Volume
Cabinet
Height
1038 mm
660 mm
839 mm
40.87 inch
25.98 inch
33.03 inch
Width
Depth
Front loading
Diameter door opening
Height under door
To center
300 mm
279 mm
505 mm
11.81 inch
10.98 inch
19.88 inch
Speed
Wash
10 - 50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250 - 1000 tr/min - RPM
G-factor
High spin
296
Dynamic bottom load (N/Hz)
538/16
Motor (3-phase)
4p. 1470 tr/min
Drain valve
0,75 kW / 1,01 HP
2"
Water supply
Hard, soft, warm water
Steam connection
Steam connection
Heating
3/4"
3/8"
Electrical 230/400 V
Electrical 400V
Steam
4,2 kW - 6 kW - 9 kW
12 kW
X
X
X
Warm water (without additional heating)
Warm water (with additional heating)
Packing dimensions
Weight
(H x W x D) mm - inch
1250x740x950 mm- 49.21x29.13x37.40 inch
Net
236 kg
258 kg
520.29 lb.
568.79 lb.
Gross
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Dimensions HC100, IHC025, CHC025, IHC100
Legend: metric mm [inches]
220 [8.66]
33 [1.3]
33 [1.3]
30 [1.18]
30 [1.18]
65 [2.56]
530 [20.87]
660 [25.98]
65 [2.56]
690 [27.16]
770 [30.31]
69 [2.72]
827 [32.56]
226 [8.9]
151 [5.94]
75 [2.95]
A
D
B
F
C
E
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G
I
109 [4.3]
L
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
K
180 [7.09]
660 [25.98]
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Technical data HC135, IHC030, IHC135
METRIC
US
Capacity (dry weight) Ratio [kg/Lit]
1:11
12 kg
13,2 kg
14,5 kg
26.46 lb.
29.10 lb.
31.97 lb.
1:10
1:9
Cylinder
Diameter
650 mm
400 mm
132 Lit
25.59 inch
15.75 inch
4.66 ft³
Depth
Volume
Cabinet
Height
Width
Depth
1202 mm
780 mm
842 mm
47.32 inch
30.71 inch
33.15 inch
Front loading
Diameter door opening
Height under door
To center
300 mm
376 mm
605 mm
11.81 inch
14.78 inch
23.82 inch
Speed
Wash
10 - 50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250 - 1000 tr/min - RPM
G-factor
High spin
363
Dynamic bottom load (N/Hz)
Motor (3-phase)
Drain valve
1100/16
4p. 1470 tr/min
1,5 kW / 2,01 HP
2"
Water supply
Hard, soft, warm water
Steam connection
3/4"
3/8"
Steam connection
Heating
Electrical 230/400 V
12 kW - 15 kW - 18 kW
Electrical 400V
21 kW - 24 kW
Steam
X
X
X
Warm water (without additional heating)
Warm water (with additional heating)
Packing dimensions
Weight
(H x W x D) mm - inch
1310x850x940 mm- 51.57x33.46x37.01 inch
Net
325 kg
355 kg
716.50 lb.
782.64 lb.
Gross
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Dimensions HC135, IHC030, IHC135
Legend: metric mm [inches]
88 [3.47]
220 [8.66]
36.5 [1.44]
82 [3.23]
665 [26.18]
760 [29.92]
36.5 [1.44]
34 [1.34]
34 [1.34]
66 [2.6]
66 [2.6]
648 [25.51]
780 [30.71]
816 [32.13]
332 [13.05]
267 [10.49]
202 [7.93]
105 [4.13]
A
F
D
B
C
E
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G
I
109.2 [4.3]
35 [1.38]
L
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
K
200 [7.87]
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Technical data HC165, IHC035, CHC035, IHC165
METRIC
US
Capacity (dry weight) Ratio [kg/Lit]
1:11
15 kg
16,5 kg
18,3 kg
33.07 lb.
36.38 lb.
40.34 lb.
1:10
1:9
Cylinder
Diameter
650 mm
500 mm
165 Lit
25.59 inch
19.69 inch
5.83 ft³
Depth
Volume
Cabinet
Height
1202 mm
780 mm
942 mm
47.32 inch
30.71 inch
37.09 inch
Width
Depth
Front loading
Diameter door opening
Height under door
To center
300 mm
376 mm
605 mm
11.81 inch
14.78 inch
23.82 inch
Speed
Wash
10 - 50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250 - 1000 tr/min - RPM
G-factor
High spin
363
Dynamic bottom load (N/Hz)
1450/16
Motor (3-phase)
4p. 1470 tr/min
Drain valve
1,5 kW / 2,01 HP
2"
Water supply
Hard, soft, warm water
Steam connection
Steam connection
Heating
3/4"
3/8"
Electrical 230/400 V
Electrical 400V
Steam
12 kW - 15 kW - 18 kW
21 kW - 24 kW
X
X
X
Warm water (without additional heating)
Warm water (with additional heating)
Packing dimensions
Weight
(H x W x D) mm - inch
1310x850x1080 mm- 51.57x33.46x42.52 inch
Net
358 kg
388 kg
789.25 lb.
855.39 lb.
Gross
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Dimensions HC165, IHC035, CHC035, IHC165
Legend: metric mm [inches]
88 [3.47]
220 [8.66]
36.5 [1.44]
82 [3.23]
765 [30.12]
860 [33.86]
36.5 [1.44]
34 [1.34]
66 [2.6]
34 [1.34]
66 [2.6]
648 [25.51]
780 [30.71]
916 [36.06]
332 [13.05]
267 [10.49]
202 [7.93]
105 [4.13]
A
F
D
B
C
E
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G
I
109.2 [4.3]
35 [1.38]
L
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
K
200 [7.87]
25
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Installation and Connection Instructions
CAUTION
Ensure that the machine is installed on a level floor of
sufficient strength and that the recommended clearances
for inspection and maintenance are provided. Never allow
the inspection and maintenance space to be blocked.
Surface
The machine (with rubber feet) must be placed on a flat, solid bottom
(concrete or fixed ground). When using a metal base or with machines with
steam heating, the machine (without feet) must be anchored on the
4 provided locations (A) (See Label 1) in the base (bolts M10). (See Mounting
Bolt Hole Locations). The height of the pad should not exceed 203 mm -
8 inch.
A
A
The machine must be placed entirely level. For easy maintenance it is
recommended to keep a minimal distance of 600 mm - 23.62 inch between
the wall and the back of the machine.
Label 1
If several machines are placed next to each another, there should be a
minimal distance of 30 mm - 1.18 inch between each machine.
Important
The bolt pattern for the fixation of the HC60 machine is located in the back
panel of the cabinet. Put this panel on the floor and mark the holes (see
page 15, reference point J).
Out of balance switch
The out of balance switch is mounted on the solid part of the machine.
There is a window around the probe of the out of balance switch that is
mounted on the movable part of the machine.
1/2
1/2
When the machine goes out of balance by overloading or uneven
distribution of the linen, the out of balance switch will interrupt this action to
prevent damage to the machine.
Window
Probe
Important
To guarantee good functioning, the probe should be centered
horizontally and vertically at 1/3 from the bottom of the out of
balance window (when machine drum is empty). (See Label 2)
Label 2
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Removal of the transport safety
To prevent damage during transportation, the machine has been
equipped with two red transport brackets (A) to eliminate every
possible movement of the tub. (See Label 3)
After the machine has been placed level, take off the back panel and
remove these transport brackets.
Warning
The machine must never be operated before
removing these transport brackets.
A
Label 3
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Mounting Bolt Hole Locations for machines, HC60, IHC012, IHC060
Legend: metric mm [inches]
65 [2.56]
530 [20.87]
660 [25.98]
65 [2.56]
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Mounting Bolt Hole Locations for machines, HC65, IHC014, IHC065
Legend: metric mm [inches]
65 [2.56]
530 [20.87]
660 [25.98]
65 [2.56]
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Mounting Bolt Hole Locations for machines, HC75, IHC018, CHC018, IHC075
Legend: metric mm [inches]
65 [2.56]
530 [20.87]
660 [25.98]
65 [2.56]
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Mounting Bolt Hole Locations for machines, HC100, IHC025, CHC025, IHC100
Legend: metric mm [inches]
65 [2.56]
530 [20.87]
660 [25.98]
65 [2.56]
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Mounting Bolt Hole Locations for machines, HC135, IHC030, IHC135
Legend: metric mm [inches]
66 [2.58]
648 [25.51]
66 [2.62]
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Mounting Bolt Hole Locations for machines, HC165, IHC035, CHC035, IHC165
Legend: metric mm [inches]
66 [2.58]
648 [25.51]
66 [2.62]
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Water connection
The machine is delivered with hoses with 3/4" connections. These hoses fit the water
inlet valves of the machine and the main water inlet taps. All the inlet valves have to be
connected. To ensure the optimal functioning of the water inlet valves, the water pressure
on the inlet should be between 3 and 5 bar (40 and 80 psi). If the pressure is too low, the
cycle time will increase considerably.
International inlet flow capacity per minute (gallons / liters): 4.23 / 16.
US inlet flow capacity per minute (gallons / liters): 5.28 / 20.
In case of boiler fed machines, a minimum of hot water of 90°C - 194°F should be
available per unit. (See Table 1)
Min Contents Boiler
MODEL
METRIC
46 l.
US
For the HC60, IHC012, IHC060
For the HC65, IHC014, IHC065
For the HC75, IHC018, CHC018, IHC075
For the HC100, IHC025, CHC025, IHC100
For the HC135, IHC030, IHC135
For the HC165, IHC035, CHC035, IHC165
Table 1
1.62 ft³
1.94 ft³
2.29 ft³
2.82 ft³
3.53 ft³
4.23 ft³
55 l.
65 l.
80 l.
100 l.
120 l.
To comply with the WRAS water regulations: an 'approved' single check valve or
some other no less effective backflow prevention device shall be fitted at the point of
connection(s) between the supply and the fitting (IRN R150).
Water drain
The machine is equipped with a drain valve with 2" outer diameter (50 mm). This drain
valve should be connected to the drain by means of the drain elbow which is delivered
with the machine.
The diameter of the main drain should be adapted to the water flow and the number
of machines. It should be sufficient to handle at least 80 l/min - 21.13 gal./min per
machine.
It is necessary to connect the main drain at least on one side to an open air-brake to
allow ventilation.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Electrical Installation
Important
Electrical ratings are subject to changes. Refer to serial plate decal for electrical ratings information
specific to your machine.
WARNING
Hazardous Voltage. Can cause shock, burn or cause
death. Allow machine power to remain off for two minutes
prior to working in and around AC inverter drive.
WARNING
Hazardous Voltage. Can cause shock, burn or death.
Verify that a ground wire from a proven earth ground is
connected to the lug near the input power block on this
machine.
The AC inverter drive requires a clean power supply free from voltage spikes and surges. If a
transformer or generator is connected to the building's power supply, always install line reactors
before the terminal block connections to the machine. A voltage monitor should be used to check
incoming power. The customer’s local power company may provide such a monitor.
If input voltage measures above 240V for a 220V drive or above 480V for a 400V drive, ask the
power company to lower the voltage. As an alternative, a step-down transformer kit is available
from the distributor.
The AC drive provides overload protection for the drive motor. However, a separate single or
three-phase circuit breaker must be installed for complete electrical overload protection. This
prevents damage to the motor by disconnecting all legs if one should be lost accidentally. Check
the data plate on the back of the washer-extractor or consult Table 2 through 7 for circuit breaker
requirements.
IMPORTANT: Do NOT use fuses in place of a circuit breaker.
For installation in the United States or Canada, branch circuit protection must be provided
according to National and Local Codes. The branch circuit breaker must be of the inverse time or
instantaneous trip type at the values given in the technical specifications for each machine.
Use a circuit breaker of the minimal type of 10kA interrupt current.
CAUTION
Do not use a voltage or phase converter on any variable speed machine.
The washer-extractor should be connected to an individual branch circuit not shared with lighting or
another electrical device.
- In accordance with legal regulations, every machine must be protected with an earth leakage
circuit breaker of 30mA.
- The earth leakage circuit breaker, which one uses, must be of the type SI.
- For countries outside the European Community, the usual safety instructions must be observed.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4
The connection should be shielded in a liquid tight or approved flexible conduit with proper
conductors of correct size installed in accordance with the National Electric Code or other
applicable codes. The connection must be made by a qualified electrician using the wiring diagram
provided with the washer-extractor, or according to accepted European standards for CE-approved
equipment.
Use wire sizes indicated in Table 2 through 7 for runs up to 50 feet.
Use next larger size for runs of 50 to 100 feet. Use two sizes larger for runs greater than 100 feet.
For personal safety and proper operation, the washer-extractor must be grounded in accordance
with state and local standards. If such standards are not available, grounding must conform to the
National Electric Code, article 250-95. The ground connection must be made to a proven earth
ground, not to a water pipe, gas pipe, or another metal pipe. Provide the necessary equipotential
connections according to the local electrical prescriptions.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded metal, permanent wiring system; or an equipment-
grounding conductor must be run with the circuit conductors and connected to the equipment-
grounding terminal or lead on the appliance.
IMPORTANT: Alliance Laundry Systems Warranty does not cover components that fail as a
result of improper input voltage.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Main power connection
Label 4
Connection label:
Machine power connections are made at the back of the machine. Three or four conductor power cable
is the recommended method (See chapter electrical specs for minimum cable requirements, if local
electrical codes exceed these requirements, follow local codes). The number of conductors in this cable
and the proper connection points for the cable wires shall be determined by the machine and power
requirements. All machines must have a ground wire and be properly grounded. The ground wire must
be insulated with a green/yellow color. This wire is normally within the power cable but can also be a
separate wire run along side the power cable if properly sized.
Never run a machine that does not have a ground wire. This ground wire must be connected to
the machine grounding lug found near the main switch. This lug is identified with the international
“protective earth” symbol and the letters “PE”. Failure to connect this ground wire can lead to an unsafe
machine condition leading to machine damage and/or operator injury or death. This wire must be
connected to earth ground at far end.
Machine Power Cable Connections:
Remove main switch cover plate at back of machine (see chapter dimensions part (F)). Run power cable
through the cabinet knock-out located directly below the cover plate. Before installing, obtain and install
a cord-grip to hold the cable in place. Never rely upon the electrical connections to hold cable in place.
Allow some slack in this cable outside of the machine to form a drip-loop between the supply power circuit
breaker and the machine knock-out. Connect power cable wires as directed below. Always connect the
ground wire first and remove last.
Wiring based on the supply power and machine design (voltage/frequency):
440-480 Volts, 3-Phase, 3-wire or 4-wire + PE, 50 or 60 Hertz Configuration (Named: N-Voltage):
With supply power of: 440-480 Volts, 3-phase, 3-wire, after connecting the green/yellow PE ground wire,
connect one wire to each of the bottom terminals of the power contactor switch marked: “L1,L2,L3”. When
this supply power has four wires, connect this 4th wire, identified as a neutral wire, to the bottom terminal
of the auxiliary contactor on the power contactor switch marked: “N”. Connect the remaining power wires
as first noted.
380-415 Volts, 3-Phase, 4-wire + PE, 50 or 60 Hertz Configuration (Named: P-Voltage):
With supply power of: 380-415 Volts, 3-phase, 4-wire, after connecting the green/yellow PE ground wire,
follow the directions of the four wire system for 440-480 Volt configuration.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
4
200-240 Volts, 3-Phase, 3-wire + PE, 50 or 60 Hertz Configuration (Named: Q-Voltage or 3-phase X-Voltage):
With supply power of: 200-240 Volts, 3-phase, 3-wire, after connecting the green/yellow PE ground wire, connect one power
wire to each of the terminals at the bottom of the power contactor switch marked: “L1,L2,L3”.
200-240 volts, 1-Phase, 2-wire + PE, 50 Hertz (called 1-phase, 50 Hz X-voltage):
With supply power of: 200-240 Volts, 1-phase, 2-wire, 50Hz, after connecting the green/yellow PE ground wire, connect
the power wire to the “L1” bottom terminal of the power contactor switch and the other wire, identified as the neutral wire,
to the bottom terminal of the auxiliary contactor on the power contactor switch marked: “N”.
200-240 volts, 1-Phase, 2-wire + PE, 60 Hertz (called 1-phase, 60 Hz X-voltage):
With supply power of: 200-240 Volts, 1-phase, 2-wire, 60Hz, after connecting the green/yellow PE ground wire, connect
one power wire to the “L1” and power wire to the “L2” of the bottom terminals of the power contactor switch.
After connection, check the spin direction. The cylinder must spin in the clockwise direction.
A wrong spin direction can damage the motor and can also cause water to spurt from the soap dispenser.
In case of wrong spin direction: switch the terminal clamps of the motor circuit “R” and “S” of the connecting cable or
change the connection at the terminal block switching the L1 and L2 wires.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications HC60, IHC012, IHC060
60 liters / 12 pounds
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
3
7
7
7
10
15
15
15
10
16
16
16
14/2.5
14/2.5
14/2.5
14/2.5
12
16
23
15
20
30
16
20
14/2.5
12/4.0
10/6.0
N/A
3x2 kW
32
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A
Alternative Electric Heat Options
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A N/A
N/A
16
N/A
14/2.5
12/4.0
N/A
13
18
15
20
3x1.4 kW
20
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A
Table 2
39
Download from Www.Somanuals.com. All Manuals Search And Download.
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications HC65, IHC014, IHC065
65 liters / 14 pounds
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE 12 15
3+PE 12 15
4
10
10
16
16
16
14/2.5
14/2.5
14/2.5
14/2.5
13
21
27
15
30
30
16
25
14/2.5
10/6.0
10/6.0
N/A
3x2 kW
32
200-240 50/60 1/3 2/3+PE 12 15
N/A N/A
N/A
Alternative Electric Heat Options
N
P
Q
X
N
P
Q
X
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A N/A
N/A
20
N/A
12/4.0
10/6.0
N/A
18
23
20
30
3x1.4 kW
3x3 kW
3x4 kW
25
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A N/A
N/A
N/A
32
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A
25
35
30
40
10/6.0
8/10.0
N/A
40
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A
25
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
21
29
30
40
10/6.0
8/10.0
N/A
32
N/A N/A
N/A N/A
N/A
N/A
200-240 50/60 1/3 2/3+PE
N/A
Table 3
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications HC75, IHC018, CHC018, IHC075
75 liters / 18 pounds
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE 12 15
3+PE 12 15
4
10
10
16
16
16
14/2.5
14/2.5
14/2.5
14/2.5
13
21
27
15
30
30
16
25
14/2.5
10/6.0
10/6.0
N/A
3x2 kW
32
200-240 50/60 1/3 2/3+PE 12 15
N/A N/A
N/A
Alternative Electric Heat Options
N
P
Q
X
N
P
Q
X
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A N/A
N/A
20
N/A
12/4.0
10/6.0
N/A
18
23
20
30
3x1.4 kW
3x3 kW
3x4 kW
25
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A N/A
N/A
N/A
32
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A
25
35
30
40
10/6.0
8/10.0
N/A
40
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A
25
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
21
29
30
40
10/6.0
8/10.0
N/A
32
N/A N/A
N/A N/A
N/A
N/A
200-240 50/60 1/3 2/3+PE
N/A
Table 4
41
Download from Www.Somanuals.com. All Manuals Search And Download.
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications HC100, IHC025, CHC025, IHC100
100 liters / 25 pounds
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE 12 15
3+PE 12 15
4
10
10
16
16
16
14/2.5
14/2.5
14/2.5
14/2.5
13
21
27
15
30
30
16
25
14/2.5
10/6.0
10/6.0
N/A
3x2 kW
32
200-240 50/60 1/3 2/3+PE 12 15
N/A N/A
N/A
Alternative Electric Heat Options
N
P
Q
X
N
P
Q
X
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A N/A
N/A
20
N/A
12/4.0
10/6.0
N/A
18
23
20
30
3x1.4 kW
3x3 kW
3x4 kW
25
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A N/A
N/A
N/A
32
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A
25
35
30
40
10/6.0
8/10.0
N/A
40
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A
25
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
21
29
30
40
10/6.0
8/10.0
N/A
32
N/A N/A
N/A N/A
N/A
N/A
200-240 50/60 1/3 2/3+PE
N/A
Table 5
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications HC135, IHC030, IHC135
135 liters / 30 pounds
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE 18 20
3+PE 18 20
6
15
10
20
20
20
14/2.5
12/4.0
12/4.0
12/4.0
23
36
49
30
40
60
32
40
10/6.0
8/10.0
6/16.0
N/A
6x2 kW
60
200-240 50/60 1/3 2/3+PE 18 20
N/A N/A
N/A
Alternative Electric Heat Options
N
P
Q
X
N
P
Q
X
N
P
Q
X
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
28
40
56
56
32
44
63
63
36
49
40
50
60
60
40
50
70
70
40
60
40
50
8/10.0
8/10.0
6/16.0
6/16.0
8/10.0
8/10.0
4/25.0
4/25.0
8/10.0
6/16.0
N/A
3x3 kW +
3x2 kW
60
200-240 50/60 1/3 2/3+PE
60
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
40
50
6x3 kW
70
200-240 50/60 1/3 2/3+PE
70
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
40
60
3x3 kW +
3x4 kW
N/A N/A
N/A N/A
N/A
N/A
50
200-240 50/60 1/3 2/3+PE
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
41
53
50
60
8/10.0
6/16.0
N/A
60
6x4 kW
N/A N/A
N/A N/A
N/A
N/A
200-240 50/60 1/3 2/3+PE
N/A
Table 6
43
Download from Www.Somanuals.com. All Manuals Search And Download.
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications HC165, IHC035, CHC035, IHC165
165 liters / 35 pounds
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE 18 20
3+PE 18 20
6
15
10
20
20
20
14/2.5
12/4.0
12/4.0
12/4.0
32
44
63
63
40
50
70
70
40
50
70
70
8/10.0
8/10.0
4/25.0
4/25.0
6x3 kW
200-240 50/60 1/3 2/3+PE 18 20
Alternative Electric Heat Options
N
P
Q
X
N
P
Q
X
N
P
Q
X
N
P
Q
X
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
23
36
49
30
40
60
32
40
10/6.0
8/10.0
6/16.0
N/A
6x2 kW
60
200-240 50/60 1/3 2/3+PE
N/A N/A
N/A
40
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
28
40
56
56
36
49
40
50
60
60
40
60
8/10.0
8/10.0
6/16.0
6/16.0
8/10.0
6/16.0
N/A
50
3x3 kW +
3x2 kW
60
200-240 50/60 1/3 2/3+PE
60
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
40
60
3x3 kW +
3x4 kW
N/A N/A
N/A N/A
N/A
N/A
50
200-240 50/60 1/3 2/3+PE
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
41
53
50
60
8/10.0
6/16.0
N/A
60
6x4 kW
N/A N/A
N/A N/A
N/A
N/A
200-240 50/60 1/3 2/3+PE
N/A
Table 7
44
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Liquid soap connection (option)
Connection of the liquid soap hoses
The liquid soap connection consists of 8 connections for liquid soap
(See Label 5).
The central opening is used for ventilation.
WARNING
Dangerous Chemicals. May damage eyes and skin. Wear eye and
hand protection when handling chemicals; always avoid direct
contact with raw chemicals. Read the manufacturer’s directions for
accidental contact before handling chemicals. Ensure an eye-rinse
facility and an emergency shower are within easy reach. Check at
regular intervals for chemical leaks.
Label 5
CAUTION
Drill out plugs and nipples before making supply hose connection.
Failure to do so can cause buildup of pressure and risk a tubing
rupture.
Electrical connection of the liquid soap pumps
On machines equipped with a liquid soap connection, connect the wires directly on
the print board next to the ground wire connection (option). Connect as indicated on
the wiring diagram.
The two connectors on the right give a tension of 220V ~ (max. 4A) which can
be applied to drive 220V ~ soap pumps. If more than 4A is required, an external
tension will have to be used. 6 connections have been provided, of which one (S6)
can be used to drive a waterproofing pump (e.g. for rain coats, etc.). (See Label 6)
Label 6
45
Download from Www.Somanuals.com. All Manuals Search And Download.
4
The 220V can be transformed to other values to drive other type soap pumps.
Example: pumps 24V ~. (See Label 7)
Label 7
Also, pumps with different operating tension can be combined.
Example: 5 pumps 220V ~ and 1 pump 24V ~. (See Label 8)
Label 8
With an external tension 24V DC (See Label 9)
Label 9
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Connection of a central operating
panel for coin machines (option)
WARNING
To reduce the risk of electric shock, disconnect this appliance from
the power supply before attempting any user maintenance. Turning
the controls to the OFF position does not disconnect this appliance
from the power supply.
At the backside above the main connectors, you find a printboard, to which the
central operating panel for coin machines can be connected.
The right connectors form a potential free output contact as a result of which the
operating panel detects when the machine is activated or not.
The left connectors receive the signal, by means of which a machine is chosen
through the operating panel.
There are 3 different variations possible according to the output voltage of the
operating panel. (See Labels 10, 11 and 12)
Label 10
Label 11
Label 12
A
IMPORTANT:
If a machine is equipped with this kind of printboard or if a printboard has been
built in, the resistance of the cycle contact (A) may no longer be present on
the main printboard. (See Label 13)
When this resistance is present, it has to be cut out of the main printboard.
Label 13
47
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Steam connection
WARNING
Never touch internal or external steam pipes, connections,
or components. These surfaces can be extremely hot and
will cause severe burns. The steam must be turned off and
the pipe, connections, and components allowed to cool
before the pipe can be touched.
Machines with steam heating must have a steam valve between the steam
installation and the machine.
5
3
4
3
2
1
6
7
With direct steam injection into the machine (See Table 8)
1. Steam pipe
2. Steam cut-off valve
3. Pipe coupling
4. Steam filter
5. Magnetic steam valve
6. Curve MF
7
7
7. Steam hose with appropriate pipe coupling
Steam Supply Information
MODEL
For the HC60, IHC012, IHC060
For the HC65, IHC014, IHC065
3/8
3/8
3/8
3/8
3/8
3/8
1
1
1
1
1
1
2.0 - 5.5 30 - 80 5.5
2.0 - 5.5 30 - 80 5.5
2.0 - 5.5 30 - 80 5.5
2.0 - 5.5 30 - 80 5.5
2.0 - 5.5 30 - 80 5.5
2.0 - 5.5 30 - 80 5.5
80
80
80
80
80
80
For the HC75, IHC018, CHC018, IHC075
For the HC100, IHC025, CHC025, IHC100
For the HC135, IHC030, IHC135
For the HC165, IHC035, CHC035, IHC165
Table 8
48
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Technical remarks
Internal connections of the electrical heating
Heating
R5
1 AC
3kw
LC1D0901
4,2 / 6 / 9kw LC1D1810
Table 9
3 AC
Heating
3x230V
R5
3x400V
R5
See Label 14
See Label 15
4,2kw
6kw
3x1,4kw
3x2kw
3x3kw
3x4kw
LC1D0901
LC1D0901
LC1D1810
--------
LC1D0901
LC1D0901
LC1D0901
LC1D0901
LC1D0901
See Label 14
See Label 14
See Label 15
See Label 15
See Label 14
See Label 15
9kw
12kw
12kw
--------
3x2kw
3x2kw
LC1D1810
LC1D1810
See Label 14
See Label 14
See Label 15
See Label 15
15kw
18kw
21kw
24kw
3x2kw
3x3kw
LC1D1810
LC1D1810
LC1D1810
LC1D1810
See Label 14
See Label 14
3x3kw
3x3kw
LC1D1810
LC1D1810
See Label 14
See Label 14
3x3kw
3x4kw
--------
--------
--------
See Label 15 LC1D1810
See Label 14
LC1D1810
3x4kw
3x4kw
--------
See Label 14 LC1D1810
See Label 14
LC1D1810
Table 10
B = Black
Br = Brown
Bu = Blue
W = White
Gy = Grey
R = Red
Label 15
Label 14
NOTE:
Other executions are available as options.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Maintenance instruction of the machine
WARNING
To reduce the risk of electric shock, disconnect this appliance
from the power supply before attempting any user maintenance.
Turning the controls to the OFF position does not disconnect this
appliance from the power supply.
Before starting wiring or inspection, power must be switched OFF,
check to make sure that the operation panel indicator is off.
Any person who is involved in wiring or inspection shall wait for
at least 10 minutes after the power supply has been switched OFF
and check that there is no residual voltage using a tester or the
like. The capacitor of the inverter or the EMC filter is charged with
a high voltage for some time after power OFF, and it is dangerous.
End of day
Clean AC drive filter:
a. Snap off external plastic cover which contains filter.
b. Remove foam filter from cover.
c. Wash filter with warm water and allow to air dry. Filter can be vacuumed clean.
General maintenance
Clean the entire cabinet of the machine regularly and remove all traces of soap,
etc....
Remove all detergent residue in the soap dispenser with hot water.
Clean the door gasket and remove all detergents and other products.
Shut off the main water, steam, and power connections at the end of each day.
Do not change the setting of the water inlet taps on boiler fed machines once
these have been installed.
It is recommended to leave the door and soap dispenser open after use, to
ventilate the machine.
Check for proper door lock operation on a daily basis.
Two to three months after the first use, the V-belts of the motors should be
checked whether they still have the correct tension. This is necessary because
these belts are subject to a one-time stretching when first used. If this is not
done, the belt starts to slip after a few months and will break shortly afterwards.
Periodical maintenance
Check the water inlet filters to make sure they are not blocked by calcification.
Check the drain valve for obstructions.
If a machine frequently skips the final spin, check whether the probe of the out of
balance switch is still in the appropriate position, that is horizontally centered and
vertically 1/3 from the bottom inside the window. (When the drum is empty).
50
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Important
- Clean the drainpipe every 6 months in case drain (B) is used.
B
A
- The water still being in the drain needs to be drained using drain (A) before
cleaning the drainpipe or replacing the exhaust valve.
Annual maintenance
Belt tension:
Verify that the belts are running in the middle of the basket pulley.
Verify the belt tension according to the table below. Belt tension measurements
should be taken as close as possible to the center of the belt span (see figure).
Belt tension testing table
Model
Belt
Frequency (Hz)
Tension force (N)
Deflection (mm)
Deflection force
at MIN
tension
at MAX
tension
MIN
107
107
107
107
75
MAX
137
137
137
137
105
105
MIN
470
470
470
470
316
316
MAX
766
766
766
766
618
618
MAX
40
HC60
HC65
8PJ 1355
8PJ 1355
8PJ 1355
8PJ 1355
10J 1473
10J 1473
7
7
4
4
40
HC75
7
4
40
HC100
HC135
HC165
7
4
40
10,5
10,5
6,4
6,4
40
75
40
1 Deflection
2 Span length
51
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Contact Information
Nameplate
Nameplate Location
The nameplate is located at the rear of the machine. Always provide the machine’s serial
number and model number when ordering parts or when seeking technical
assistance. See Labels 16 and 17.
Label 16
Label 17
52
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Position of the Serial plate
Replacement Parts
If literature or replacement parts are required, contact the source from which the
machine was purchased or contact the phone numbers or websites shown on the
nameplate.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Repair and after-sales service
In case of important malfunctions and deficiencies, which you cannot
resolve yourself, contact your distributor.
Name:....................................................................................
Address: ................................................................................
Tel.:........................................................................................
Distributor :
Machine :
Type:......................................................................................
Program:................................................................................
Date of installation:................................................................
Installed by: ...........................................................................
Serial number:.......................................................................
Operation voltage and frequency: .........................................
Alliance Laundry Systems
Shephard Street, PO BOX 990
Ripon, WI 54971-0990
United States
Tel: 001 920 748 3121 - Fax: 001 920 748 1645
Alliance International bvba
Nieuwstraat 146 - B-8560 Wevelgem (Belgium)
Tel. +32 56 41 20 54 - Fax +32 56 41 86 74
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|