|
USB V.90
FAX/MODEM
Quick Installation Guide
M73-APO08-380
Download from Www.Somanuals.com. All Manuals Search And Download
FCC Part 15 Registration
This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions:
1) This device may not cause harmful interface, and
2) This device must accept any interface received,
including interface that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
(1) Reorient or relocate the receiving antenna.
(a) Increase the distance between the equipment and
receiver
(b) Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
(2) Consult an experienced radio/TV technician for help.
Download from Www.Somanuals.com. All Manuals Search And Download
CTR 21 pan-European Certification
This equipment has been approved in accordance with
Council Decision 98/482/EC for pan-European single
terminal connection to the public switched telephone network
(PSTN). However, due to differences between the individual
PSTNs provided in different countries, the approval does not,
of itself, give an unconditional assurance of successful
operation on every PSTN network termination point. In the
event of problems, you should contact your equipment
supplier in the first instance.
This device is designed to work with the notified networks in
all EC member states. Nevertheless, some of the network
services in individual countries might not be supported, but
they will not affect the normal data and fax applications. For
example, the metering charge service in Germany. Besides
you may encounter difficulty of using PULSE dialing
function in some of the countries, such as Nordic countries.
This kind of network compatibility is dependent on the
physical and software settings of this device. If the users are
desired to use this device on those networks, they should
contact the vendor or supplier first.
Download from Www.Somanuals.com. All Manuals Search And Download
Introductions
The USB V.90 Fax/Modem is fully compatible
with the Universal Serial Bus functionality built
in Windows 98/2000/ME/XP. Installation is easy
and no external power is required. You can now
enjoy the advantage of all the benefits offered
with USB technology. Providing the fastest
possible Internet access up to 56K, the USB
V.90 Fax/Modem is faster than any other
conventional Fax/Modem.
System Requirements
ꢀ
A Pentium processor-based personal
computer 166MMX or above.
At least 16 MB of RAM.
An USB port.
Microsoft Windows 98/2000/ME/XP.
A CD-ROM drive.
ꢀ
ꢀ
ꢀ
ꢀ
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download
Parts Names and Functions
ꢁUSB connection cable: connects the USB
host port to the USB V.90 FAX/MODEM.
6
connects to the USB host port
5
4
3
1
2
ꢂUSB-B: USB device port.
ꢃLINE jack: connects to the phone line.
ꢄOH LED indicator: glows when it is in on-
line status.
ꢅReady LED indicator: glows when the device
is well installed.
ꢆRx/Tx LED indicator: blinks when the USB
V.90 Fax/Modem is transmitting/receiving data.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download
HARDWARE INSTALLATION
1. Locate the USB host port of your system.
Align the USB connector toward the USB
host port. Push evenly and steadily until it
is seated.
2. Connect the other end of the USB
connection cable to the device port (USB B)
of the USB V.90 Fax/Modem until it clicks.
3. Connect your phone line to the LINE jack.
Software Installation
Installation for Windows 98
1. When the USB V.90 Fax/Modem is well
connected to your computer, Windows 98
will automatically detect the new device.
Click Next.
2. Select Search for a suitable driver for my
device (recommended) and click Next.
3. Insert the device driver compact disc into
the CD-ROM drive and select Specify a
location. Click Browse button and select the
drive where you load the device driver (for
example: E:\WIN98). Click Next. Windows
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download
will start searching for the appropriate driver
for the software installation.
4. Click Next.
5. Click Finish. The software installation is
successfully complete.
6. When the following dialog box appears,
select the country/location where you are,
and click Enable PBX. Click OK.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download
7. When finished, restart your computer to
activate the new device.
Installation for Windows 2000
1. When the USB V.90 Fax/Modem is well
connected to your computer, Windows 2000
will automatically detect the new device.
Click Next.
2. Select Search for a suitable driver for my
device (recommended) and click Next.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download
3. Insert the new device driver compact disc
into the CD-ROM drive. Select Specify a
location and click Next.
4. Click Browse button and select the drive
where you load the device driver (for
example: E:\WIN2K).
Click OK.
Windows will start searching for the
appropriate driver for the software
installation.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download
5. Click Next to continue.
6. Click Yes.
7. Click Finish.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download
8. When Windows prompt you “Modem
Country Selection”, choose the country
where you locate. Select the Enable PBX
check box and click OK. The software
installation is then complete.
9. The software installation is successfully
complete.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download
Installation for Windows ME
1. When the USB V.90 Fax/Modem is well
connected to your computer, Windows ME
will automatically detect the new device.
Select Specify the location of the driver
(Advanced) and click Next.
2. Load the device driver compact disc into the
CD-ROM of your system and select Specify
a location. Click the Browse button to
select the drive where you load the device
driver (for example: F:\WinME). Click
Next.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download
3. Expect a minor delay for Windows to search
for the appropriate driver for the device.
Click Next.
4. Click Finish. The installation program will
continue.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download
5. Select Specify the location of the driver
(Advanced) and click Next.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download
6. When the above figure appears, repeat step
2, namely, select Specify a location. Click
the Browse button to select the drive where
you load the device driver (for example:
F:\WinME). Click Next.
7. Click Next.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download
8. When Windows prompt you “Modem
Country Selection”, choose the country
where you locate. Select the Enable PBX
check box and click OK.
9. Click Finish to complete the installation.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download
Installation for Windows XP
1.
When the USB V.90 Fax/Modem is
connected to your computer, Windows XP
will automatically detect the new device.
Select Install from a list or specific
location (Advanced) and click Next.
2.
Load the device driver compact disc into
the CD-ROM of your system and select
Include this location in the search. Click
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download
the Browse button to select the drive
where you load the device driver (for
example: D:\WinXP). Click Next.
3.
Click Continue Anyway.
4.
Expect a minor delay for Windows to
search for the appropriate driver for the
device.
5.
Click Finish to complete the software
installation.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download
|