Daewoo SH 3510P User Manual

INSTRUCTION MANUAL

ENGLISH

DVD Player + Video Cassette Recorder

SH-3510P/SH-9810P/SH-9840P

SH-3510P

STANDBY/ON

VIDEO

AUDIO

EJECT

REC

SELECT

STOP

REW PLAY/PAUSE FF

OPEN/CLOSE

AV INPUT

SH-9810P & SH-9840P

HELP LINE ; 0 870 100 2525

Please read this manual carefully before connecting your DVD+VCR and operating it for the first

time.

Keep the manual in a safe place for future reference.

Important Safeguards

The lightning flash with arrowhead symbol,

CAUTION

RISK OF ELECTRIC SHOCK

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and servicing

instructions in the literature accompanying the

appliance.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

IMPORTANT FOR LASER PRODUCTS

• LASER : This Digital Video Disc Player employs a Laser System. To ensure proper use of this product

please read this instruction manual carefully and retain for future reference. Should the unit

require maintenance, contact an authorized service location - see service procedure.

Use of control adjustments or the performance of procedures other than those specified

may result in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser

radiation when open and interlocks defeated.

DO NOT STARE INTO THE BEAM.

• DANGER : Visible laser radiation when open and interlock failed or

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

defeated. Avoid direct exposure to beam.

• CAUTION : Do not open the top cover. There are no user

serviceable parts inside the Unit; leave all servicing to

qualified service personnel.

This set complies with the EMC Directive 89/336 and with the LVD Directive 73/23.

CAUTION: Any changes or modification in construction of this device which are not expressly approved by

the party responsible for compliance could void the user’s authority to operate the equipment.

• Make sure the unit is placed at least 8cm away from the other home appliances or obstacles in

order to allow sufficient ventilation around the unit.

• This unit should not be exposed to drips or splashes and no objects filled with liquids, such as

vases, should be placed on this unit.

• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the

mains, you have to unplug it.

• The system is not completely disconnected from the mains when the

the position.

/ I button is set to

Important Safeguards

This set has been designed and manufactured to assure

personal safety. Improper use can result in electric shock

or fire hazard. The safeguards incorporated in this unit

will protect you if you observe the following procedures

for installation, use and servicing. This unit is fully

transistorised and does not contain any parts that can be

repaired by the user.

surfaces may cause the product and cart

combination to overturn.

VENTILATION

Slots and openings in the case are provided for

ventilation to ensure reliable operation of the unit

and to protect it from overheating. These openings

must not be blocked or covered. These openings

must not be blocked by placing the unit on a bed,

sofa, rug, or other similar surface. This unit should

never be placed near or over a radiator or heat

radiator. This unit should not be placed in a built-in

installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s

instructions have been adhered to.

READ INSTRUCTIONS

All the safety and operating instructions should be

read before the unit is operated.

RETAIN INSTRUCTIONS

The safety and operating instructions should be

retained for future reference.

HEED WARNINGS

POWER SOURCES

All warnings on the unit and in the operating

instructions should be adhered to.

This unit should be operated only from the type of

power source indicated on the rating label. If you are

not sure of the type of power supply to your home,

consult your dealer or local power company. For

units intended to operate from battery power, or

other sources, refer to the operating instructions.

FOLLOW INSTRUCTIONS

All operating and use instructions should be

followed.

10 MAINS PLUG

ATTACHMENTS

We have fitted this unit with a standard mains plug.

Do not use attachments unless recommended by the

unit’s manufacturer as they may cause hazards.

• If the mains lead gets damaged it must be replaced

by a qualified service agent with an approved lead

of the same type.

WATER AND MOISTURE

Do not use this unit near water- for example, near a

bath tub, wash bowl, kitchen sink or laundry tub, in

a wet basement, or near a swimming pool.

• If the plug is cut off, remove the fuse from the plug

and get rid of it safely, as if you put it into a supply

socket it would be dangerous.

• If you change the plug because the standard plug

is damaged or unsuitable, please destroy the old

plug as it would be dangerous if plugged into a

live power outlet. Follow the wiring instructions

supplied with the new plug.

ACCESSORIES

Do not place this unit on an unstable cart, stand,

tripod, bracket, or table. The

unit may fall, causing serious

injury to a child or adult as

PORTABLE CART WARNING

(symbol provided by RETAC)

well as serious damage to the

unit. Use this unit only with a

cart, stand , tripod, bracket,

11 POWER-CORD PROTECTION

You must make sure the mains lead cannot be

walked on, crushed, chafed, cut, and so on.

or table recommended by the manufacturer.

12 LIGHTNING

A unit and cart combination should be moved

For added protection for this unit during a lightning

storm, or when the unit is left unattended and

with care. Quick stops, excessive force, and uneven

Important Safeguards

unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable

system. This will prevent damage to the unit due to

lightning and power line surges.

E. If the unit has been dropped or the cabinet has

been damaged.

18 REPLACEMENT PARTS

When replacement parts are required, have the

service technician verify that the replacements he

uses have the same safety characteristics as the

original parts. Use of replacements specified by the

unit manufacturer.

13 DISC TRAY

Keep your fingers well clear of the disc tray as it is

closing.

14 OBJECT AND LIQUID ENTRY

19 SAFETY CHECK

Never push objects of any kind into this unit

through openings as they may touch dangerous

voltage points or “short-out” parts that could result

in a fire or electric shock. Never spill liquid of any

kind on the unit.

Upon completion of any service or repairs to this

unit, ask the service technician to perform safety

checks recommended by the manufacturer to

determine that the unit is in safe operating

condition.

15 BURDEN

20 HEAT

Do not place a heavy object on or step on the

product. The object may fall, causing serious

personal injury and serious damage to the product.

The product should be situated away from heat

sources such as radiators, stoves, or other products

(including amplifiers) that produce heat.

16 DISC

21 NORMAL USE

Do not use a cracked, deformed or repaired disc.

These discs are easily broken and may cause

personal injury and product malfunction.

This product is only designed for household or

similar general use. Any other use may invalidate

the guarantee and could be dangerous.

17 DAMAGE REQUIRING SERVICE

MAINS FUSE IN THE UK

Unplug this unit from the wall outlet and refer

servicing to qualified service personnel under the

following conditions.

If you use a 13 amp (BS 1363 type) plug, you must have

a 3 amp (BS1362 type) fuse fitted. For any other type of

plug or connection, you must fit a fuse rated between 3

and 5 amps in the mains plug or adapter, or at the fuse

box feeding this unit.

A. When the power-supply cord or plug is

damaged.

B. If liquid has been spilled, or objects have fallen

into the unit.

EUROPEAN SYMBOLS

C. If the unit has been exposed to rain or water.

D. If the unit does not operate normally by

following the operating instructions. Adjust

only those controls that are covered by the

operating instructions. Improper adjustment of

other controls may result in damage and will

often require work by a qualified technician to

restore the unit to its normal operation.

This unit is double insulated and

an earth connection is not

required.

This unit complies with

European safety and electrical

interference directives.

Advantages of This Product Are .....

• DVD, VCD, CD, CD-R(MP3), CD-RW, VHS

• Watching DVD and recording broadcasts

• Integrated remote control (VCR, DVD)

• VISS function

•

Repeat playback (title, chapter, and part for

DVD/ track, disc, and part for VCD/CD)

• Selective Play (DVD/VCD/CD)

You can select and play the desired title / chapter

of DVD and track of Video CD/CD in STOP mode.

• 6 languages OSD (On Screen Display)

function (DVD)

• Multiplex sound playback/record

(SH-9810P & SH-9840P only)

• High Sound Quality of 6 head Hi-Fi

(SH-9810P & SH-9840P only)

You can select and display OSD in 6 languages.

(E / F / S/ G/ I / D)

• Simple record function

• MP3 file playback function (CD-R disc having • Parental Lock function (DVD)

records of MP3 files)

This function can prevent playback of software

• GUI (Graphical User Interface) through OSD

(On Screen Display)

that may be unsuitable for children.

• Multi Audio function (DVD)

By using the [DISPLAY] button on the remote

control, information on the DVD/VCD/CD player

and disc, can be displayed on the TV screen.

• Screensaver function (DVD)

The audio soundtrack can be heard in up to 8

languages. In the case of SVCD or VCD, it depends

on the disc. (The number of audio languages

depends on the software.)

• 3D sound (3D sound effect using 2 speakers)

• High bit / High sampling with 27MHz / 10bit

video encoder

• Multi Subtitle function (DVD)

The subtitle can be seem in up to 32 languages. In

the case of SVCD or VCD, it depends on the disc.

(The number of subtitle languages depends on the

software.)

• High bit / High sampling with 96MHz / 24bit

Audio D/A Converter

• Coaxial, Optical digital Audio output (PCM,

Dolby Digital, dts)

• Multi Angle function (DVD)

This function allows you to choose the viewing

angle of scenes which were shot from a number of

different angles. (The number of angles depends

on the software.)

You can enjoy high-level digital audio by

connecting with an amplifier embedded with

Dolby Digital / dts decoder.

• Built-in Dolby Digital decoder (DVD)

• Analog audio 2-channels output for

DOWNMIX (x1)

• Screen zoom function (DVD/VCD)

• Composite video output (x1)

• Slow Forward / Reverse playback (DVD)

• Fast Forward / Reverse playback

• Search of title, chapter, and time in DVD disc,

and search of time and track time in VCD

• Various TV aspect (DVD)

4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9 for

Wide

Read Carefully before Using

Cautions in use of DVD-Video player are described below.

Please read carefully before using a DVD-Video player.

and maintenance every 1,000 hours of use by

technical engineers.

• For checking, contact your dealer or your nearest

service centre.

✔ Installation place and handling

• When you place this player near other devices,

they may affect poorly together.

✔ Checking and Replacement of Antenna

• The antenna is subject to change in its direction

or damage by wind and rain. For a clear picture,

contact and consult your nearest aerial rigger

about checking and replacement.

•

When you place DVD-Video player above or below

a TV, it may cause flickering of pictures or failure

(tape is not ejected).

• When you place this player near strong magnetic

materials, it may affect image or voice poorly or

damage recording.

✔ Recording important pictures

•

Be sure to record the screen and check whether

recording is performed properly. Bad recordings

can result if using poor quality tapes.

•

Do not spill volatile liquids like insect spray over

the player. Do not leave rubber or plastic products in

contact with the player for a long time. They will

cause deterioration or paint to peel-off.

✔ Copyright

• Do not use your recordings without permission

of a copyrighter except personal usage.

✔ Not in use

• When the unit is not in use, be sure to remove the

disc or tape and turn off the power.

✔ Tape and Disc Handling

•

If you do not use the unit for a long period, remove

batteries in remote control to prevent leakage.

•

Do not use any tape and disc in conditions listed

below. Damage of video head or cut/coiling of tape

may cause failure.

• If you don’t use the unit for a long time, the unit

may not function properly in the future. Turn on

and use the player occasionally.

- Tape with mold

- Tape or disc stained with juice or food particles

- Tape having breakage connection

- Disassembled tape

✔ Moving

• Repack the unit as it was originally packed at the

factory. Alternatively, pack this product with

towel to prevent transit damage.

- Disc with severe scratch

•

Moisture condensation may occur on tape.

Moisture condensation damages the tape. Only

use the tape after the moisture condensation has

disappeared.

• Eject any videotape.

✔ Cleaning

•

After use, store tape vertically in a case to

prevent the tape from becoming loose.

• Dust off dirt in cabinet or control panel part

smoothly with a soft cloth.

• For heavy dirt, soak the cloth in a weak detergent

solution, wring it well and wipe. Use a dry cloth

to wipe it out.

• Follow instructions in using chemical cleaners.

• Do not use any type of solvent such as gasoline or

benzene, as they may cause deterioration or paint

to peel-off.

• Do not store in the following places.

- High temperature and humidity

- Subject to generation of mold

- Subject to direct sunlight

- In dirt or dust

Near strong magnetic materials such as a speaker

✔ Checking

• The video is a high precision device. To obtain a

clear picture, we recommend regular inspection

Identification of Controls

Main body (front panel)

✔

SH-3510P

STANDBY/ON

VIDEO

AUDIO

EJECT

REC

SELECT

STOP

REW PLAY/PAUSE FF

OPEN/CLOSE

AV INPUT

^ &

(

)

✔

SH-9810P & SH-9840P

$ %

^ &

(

)

POWER (STANDBY/ON) button

Use to power the device on/off if AC power supply

is connected.

STOP button

Use to stop playing.

REWIND button

(

Place to insert videotape

Disc tray

Use to rewind currently being played, videotape or

disc; or to review.

VIDEO INPUT jack

AUDIO INPUT jack

EJECT button

Playback/PAUSE button

Playback videotape or disc.

Press this button to pause a screen.

FAST FORWARD button

RECORD button

Use to wind currently being played videotape or

disc; or to playback rapidly.

Programme Down/Up button

Operation Display Window

OPEN/CLOSE Tray button

Display operation of device. For more information,

see “Operation Display Window” in 7p.

)

SELECT button

Use to change DVD mode to VCR mode, and vice

versa.

Identification of Controls

Operation Display Window

- RECORDING MODE -

- REPEAT MODE -

[DVD]

Repeat one chapter

Timer Recording Standby

[VCD]

Repeat track

[DVD]

Repeat title

Repeat ALL

Timer Recording Error

Recording in Progress

[VCD]

Repeat a defined period

[DVD, VCD]

from A

Repeat a defined period

Timer Recording in

Progress

[DVD, VCD]

from A to B

Recording Pause

- DVD OPERATION -

- VCR OPERATION -

DVD playback

VCR playback

Fast playback

Fast forward

Fast reverse playback

Slow playback

Pause picture

Rewinding

Fast playback (CUE)

Fast reverse playback

(REVIEW)

Slow playback

Still picture

Stop

Child Lock

Identification of Controls

Main body (Rear Panel)

POWER CORD

Connection to ANTENNA Cable

Connection to TV

It is a jack for supplying power to the unit.

Connect to outlet in a wall.

EURO AV1 scart socket

EURO AV2/DECODER scart socket

VIDEO OUTPUT phono socket

AUDIO OUTPUT phono socket

DIGITAL OUTPUT (OPTICAL/COAXIAL) Jack

To enjoy sound quality of theatre level in home,

connect this jack with amp or unit embedded

with digital audio decoder.

Identification of Controls

Accessories

Instruction

Manual

Scart cable

(supplied only SH-9840P)

Remote control

2 Batteries

RF cable

• To purchase accessories or not supplied additional parts, contact your nearest dealer or service centre.

N.B.: Owner’s manual and warranty are not sold additionally.

Instructions in using REMOTE

• Operate remote control within 7m from the unit.

• Do not press 2(two) buttons at the same time.

• Excessive sun light falling on the remote receiver may cause the remote control to become inoperative.

• Do not keep in the place with much dust and humidity.

✔

Remote control battery installation

Detach the battery cover on the rear of the

remote control, and insert two AAA

batteries with the + and - ends aligned

correctly.

Two “AAA”

batteries

(supplied).

Remote Control

^[DVD]OPEN/CLOSE button, ^[VCR]EJECT button

VCR SELECT button

^{[DVD, VCR]}NUMBER button, ^[VCR]TRACKING -/+

button

SYSTEM button (This button is not available for this set)

SETUP button

^{[DVD, VCR]}MOVE/SELECT in OSD, ^[VCR]Channel

Up/Down button

“

^[DVD]TITLE /PBC button

^[DVD]AUDIO LANGUAGE Select, ^[VCR]AUDIO Select

button (SH-9810P& SH-9840P only)

‘

(

)

^[DVD]SUBTITLE Select button

REVERSE SEARCH button

PLAY/PAUSE button

^[DVD]PREVIOUS button (move into a previous chapter

or track)

“

‘

^[VCR]Record SPEED button

^[VCR]Record button

^[VCR]TV/VCR button

^[DVD]3D button

(

)

^[VCR]CM SKIP

^[VCR]Replay button

POWER button

DVD SELECT button

^[VCR]INPUT Selection button

CLEAR button

^{[DVD, VCR]}OSD DISPLAY button

OK/ENTER button

^[DVD]MENU button

^[DVD]Chapter/Title/Time SEARCH button

^[DVD]ZOOM button

FORWARD SEARCH button

STOP button

Child Lock !

Press the power [ ] button of the remote for about

5 seconds. No buttons of front panel can be operated

^[DVD]NEXT button (Move into a next chapter or track) ,

^[VCR]Frame Advance button in pause mode

now and Lock indicator (“

”) will be

displayed on window display. To release child lock,

press any button on the remote control.

^[DVD]REPEAT Playback button

^[DVD]REPEAT a defined period from A to B button

^[DVD]ANGLE button

POWER ON

^[DVD]MARK button

Player will POWER ON if any button on the

remote control is pressed.

^{[DVD, VCR]}PROGRAMME button (SH-9840P only)

^[VCR]LAST CHANNEL button (Return to the previous

TV channel which was being watched.)

Setting up your player

✔ Before you start, unplug all the equipment from the mains supply.

(Option 1) - Connecting your player through RF lead

Television

Aerial

The type of aerial you

should use, depends on

local interference and how

far you are from the

200-240V~,

50/60 Hz

transmitter. You should

contact a local retailer if you

have any questions about

your aerial.

Back view of your player

(Option 2) - Connecting your player through a scart lead

Television

Aerial

200-240V~,

50/60 Hz

Scart lead (supplied only

SH-9840P )

Back view of your player

With this connection, if your player is receiving CH BBC1 and your TV is displaying CH3, when you press the

[TV/VCR] button on the remote control, your TV will automatically display the CH BBC1. “VCR” will be

shown in the display.

In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.

To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will

get better pictures and sound quality if you connect your player using a scart lead.

Connecting your player through

extra equipment (satellite system)

✔ Before you start, unplug all the equipment from the mains supply.

(Option 1) - Connecting your player through RF lead

Television

Aerial

200-240V~,

50/60 Hz

Back view of your player

Satellite

You can use this connection if your player has two scart sockets. This will improve sound and picture quality

when you are recording from satellite.

Connecting your player to the Hi-Fi system

✔ Before you start, unplug all the equipment from the mains supply.

Option 1

Television

Aerial

Hi-Fi

200-240V~,

Plug a phono cable into the

50/60 Hz

“Audio L/R” sockets on the

back panel and into the audio

sockets on any audio

amplifier, if needed. If your

player does not have this

connection, see page 15.

Player

You can also use a scart lead to improve picture and sound quality from your player.

Option 2

Television

Aerial

Hi-Fi

200-240V~,

50/60 Hz

If required, plug a scart to

phono cable into the “AV1”

socket on the back panel and

into the audio socket on any

audio amplifier.

Player

How to connect your player to another player

✔ Before you start, unplug all the equipment from the mains supply.

How to connect

First player

200-240V~,

50/60 Hz

connect a scart lead

from player to second

VCR

Second player

1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front

display.

2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.

3) Press the [RECORD] button on the first player.

The player will start recording.

If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.

To use this function, see page 16.

How to connect your player to a camcorder

✔ Before you start, unplug all the equipment from the mains supply.

How to connect

Television

Aerial

Camcorder

200-240V~,

50/60 Hz

camcorder

Scart Plug to

Player

If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on the

back panel of the player to the television. To use this function, see page 16.

You can also connect the camcorder by using a phono cable if your player has front input sockets.

Check the front of your player for this connection, see page 16.

Connecting Dolby Digital Amp with

Digital Audio Out Jack

How to connect

REAR PANEL OF DVD-VIDEO

CONNECTING CABLE

(Not supplied)

(L) AUDIO IN (R)

Home Theatre Receiver with Dolby Digital decoding capability

Select either COAXIAL or OPTICAL to connect to amp of Dolby Digital.

** If you want to know about “Dolby Digital”, please refer to [About DVD] in 54-56p.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theatre Systems, Inc.

2nd scart socket

If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on

pages 12-15.

2nd scart

INPUT ONLY

INPUT+OUTPUT

When connecting other equipment please refer to their manuals for further information. This video manual

recommends the set up as shown on page 12. If the equipment is turned off when connected by this method, the

video behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2

mode and displays the channel of the other equipment, channel selection can only be performed by the other

equipment, the video PR+/PR- buttons have no effect.

To return to normal video use the other equipment must be turned off.

Recording from other Equipment.

Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.

Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be

recorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if this

feature is not available the other equipment should be left powered on.

Front AV

If the video has front input sockets, it is possible to connect devices such as a

camcorder to the video. To watch a camcorder tape the video must be in

AVF mode. Recordings of this input are the same as described on page 14.

Initial Installation

✔ Switch the TV on.

✔ You can also start "AUTO SET" in the SETUP "PR PRESET"

✔

"AUTO SET".

✔ To tune in new stations (manual tuning) and to enter station names see page 24-25.

Setting up the player

You should see this picture the first time you switch on the TV

and player.

AUTO SET

OK:CONFIRM

SETUP:END

OK for "AUTO SET!".

"AUTO SET" tunes in all the stations you can receive in your

country.

CH 25

PLEASE WAIT...

Clock is automatically set.

SETUP:END

If other stations are positioned on near the current RF OUTPUT

CH, the guide message appears automatically.

RF OUTPUT SET

CURRENT

CH 52

The player recommends the optimal RF OUTPUT CH number

automatically.

RECOMMENDED CH 54

0-9:SELECT(21-69)

OK:CONFIRM

SETUP:END

Press the [OK] button to confirm the recommended PR.

IMPORTANT!

Should you wish the stations to have the same numbers as those

used on the TV, follow the instructions in "Sorting programme

locations" on page 25.

PLEASE CHANGE THE TV

CH TO 54.

Otherwise ...

exit the basic installation function and enjoy your player.

MANUAL SET

PR01 P-O1 PR08 P-08

PR02 P-02 PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 P-05 PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

PR+/-:SELECT

OK:CONFIRM

SETUP:END

•

If you don´t see this picture, because you don´t use a SCART cable,

search this picture now (CH 52) with the station tuning functions of

your TV set (see its user manual).

In case of interference problems on CH 52, type in an

other transmission channel between 21 and 69 using

the number buttons.

Setting time and date

✔ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure

below.

Call up the player’s "SETUP" menu,

choose "VCR SETUP", then "CLOCK SET".

CLOCK SET

TIME - - : - -

DATE - - / - - /- - - -

0-9:SETUP (HOUR)

✔

/✔:CORRECT SETUP:END

Move to the position you want to change and type in the

new values.

Wait a few seconds after typing a one-digit number.

CLOCK SET

TIME 06:05

DATE 08/08/2004(SUN)

Store with [OK] button and exit with [SETUP] button.

0-9:SETUP (HOUR)

✔

/✔:CORRECT

OK:CONFIRM

SETUP:END

Auto clock

Setting Auto clock

✔ Auto Clock is only available for models with the VPS/PDC function (see page 26).

Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will

automatically use this time and date during the initial setting up procedure during normal use, and every

time you switch the video off at the mains. If you find that this time and date is incorrect you can remove

this feature by following the steps below changing it to OFF mode, you will then have to manually set the

time and date, see above.

VCR SETUP

AUTO CLOCK

CLOCK SET

OFF

RF OUTPUT SET

16:9 SET

OSD ON/OFF

AUTO CLOCK

PR+/-:SELECT

OK:CONFIRM

PR+/-:SELECT

OK:CONFIRM

SETUP:END

OSD ON & OFF

OSD (On Screen Display) ON & OFF

This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it

to OFF mode.

SETUP

Call up the player’s "SETUP" menu.

TIMER PROGRAM

PR PRESET

VCR SETUP

TAPE CONTROL

PR+/-:SELECT

OK:CONFIRM

SETUP:END

VCR SETUP

Choose “VCR SETUP”.

And press the [OK] button.

CLOCK SET

RF OUTPUT SET

16:9 SET

OSD ON/OFF

AUTO CLOCK

PR+/-:SELECT

OK:CONFIRM

SETUP:END

Select “OSD ON/OFF”.

If you want OSD OFF mode, select it and press [OK] button to

confirm.

OSD ON/OFF

OFF

Then OSD characters are not displayed in the normal picture.

PR+/-:SELECT

OK:CONFIRM

SETUP:END

Output Select

To Select DVD

Press [DVD] button.

If DVD mode is correctly selected, DVD is displayed on the operation

display. Then, REMOTE control works in DVD function.

To Select VCR

Press [VCR] button.

If VCR mode is correctly selected, DVD on the operation display

window goes out. Then, REMOTE button works as VCR function. Press

the [VCR] button, then it becomes to the VCR OPERATION mode.

To Select Operation Mode or External Input

Press [INPUT] button.

When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT will be selected.

But, this button will not function in PLAY, REC and DVD mode.

DVD Playback

Press [ ] button to power on.

Press [DVD] button of REMOTE to select DVD mode.

Press [OPEN/CLOSE] button to open the disc tray.

Place a disc firmly on the disc tray, ensuring the disc’s label is uppermost.

Insert the disc and press [OPEN/CLOSE] button to close the tray.

The disc tray will close and after initialisation, Playback or Stop function starts

to operate.

To play the disc, press [PLAY/PAUSE] button.

• In the case of DVD,

DVD menus and titles are displayed on TV screen.

• In the case of S-VCD and VCD2.0

the menus are displayed on the TV screen and it is converted into PBC

(Playback Control) mode.

• In the case of CD, VCD1.1 and MP3,

the disc plays.

To stop it, press [ ] button.

For pause, press [PLAY/PAUSE] button in playback mode.

If you press this button once more, it starts playback again.

Press [OPEN/CLOSE] button to remove the disc.

Various Playback Methods

✔ If you want fast forward (cue) or reverse (review) playback, press [√√] or [œœ]

button in Playback mode. You can watch fast playing (reverse ) screen.

* This reverse playback may be unavailable for certain DVD.

✔ If you want slow (or reverse) playback, press [√√] or [œœ] button in Pause mode.

You can watch the desired scene in the slow forward (reverse) playback.

* In the case of Video CD, this reverse slow playback function is unavailable.

The

mark will appear.

✔ If you want a still picture, press [PAUSE] button in Playback mode. You can watch

the desired screen in Pause status.

VCR Playback

Press [ ] button to power on.

Press [VCR] button of remote control to change to VCR mode.

Insert the desired tape.

If you want to playback, press [PLAY/PAUSE] button.

When the operational status is flickering, adjust [TRACKING +/-] button.

To stop it, press [ ] button.

For pause, press [PLAY/PAUSE] button in playback mode.

If you press this button once more, it starts playback again.

Press [EJECT] button on the front part of the unit or [OPEN/CLOSE]

button on remote control to eject the tape.

Various Playback Methods

✔ If you want fast forward (or reverse) playback, press [√√] or [œœ] button in

Playback mode. You can watch fast playing cue/review (rewinding) on screen.

* NOTE: You might see no colour and a noise band when you fast forward (or

reverse) playback the tape which is recorded in LP mode.

✔ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch

the desired scene in pause status.

✔ If you want slow-motion playback, press [√√] button in Pause mode. You can

watch the desired scene in the slow forward (cue) playback.

* NOTE: VCR doesn’t have Slow Reverse Playback function.

✔ If you want to watch a series of screens one by one, (FRAME ADVANCE) press

[NEXT √√✔✔] button in Pause mode. Each time you press this button, the picture

advances by one frame.

If the product, which

has a auto-detector,

detects a contaminated

head(s), it shows the

conditions to notice the

contamination on

screen.

✔ If you press [REPLAY] button in playback mode, the player quickly rewinds 15

seconds of the tape and plays it again.

✔ If you press [CM SKIP] button in playback mode, the player quickly skips 30

seconds of the tape and then reverts to play again.

To Adjust Display

* In case of the notice

on screen, please rub

the heads with a head-

cleaner followed by

“How to use a head-

cleaner”.

This product includes an automatic Tracking feature and enables users to enjoy clear

pictures without any additional operation. Provided that the following problems can be

solved by manual adjustment, which improves display quality. (During automatic

picture adjustment, “Adjusting Display” is displayed on TV screen.)

- If the picture is poor in Playback mode,

If noises occur in the upper or lower part of the picture in slow playback (cue) mode,

- If paused picture vibrates up and down.

Use [TRACKING +/-] buttons of remote control to adjust the display for optimum

viewing.

Recording

To Record With VCR

Press [ ] button to power on.

• Press [VCR] button of remote control to change to VCR mode.

Insert a recordable tape.

Insert a tape with recording tab.

With [CHANNEL], [NUMBER] and [INPUT] buttons, select the desired

broadcasting channel or external input unit to be recorded.

Select the desired speed (SP or LP) with [SPEED] button.

Press [REC] button.

Then, it starts recording.

If you want to pause recording, press [PAUSE] button.

After pressing [PAUSE] button, if the pause status continues for five minutes, it

will be released and the recordings will continue automatically.

To exit recording, press [STOP] button.

To Enjoy a TV Channel or DVD during recording

If you want to playback DVD during recording with video, insert a DVD disc.

Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT

into DVD mode and press [PLAY] button. Then, you can watch DVD.

If you want to watch a TV channel during DVD recording with video, press

[VCR] button to convert OUTPUT into VCR mode and press [PR+/-] button.

Then , you can watch a TV channel.

Recording

To Copy From DVD To Videotape

Insert the desired DVD disc.

When the DVD disc is copyright protected, you can’t copy it. If DVD disc is not

copy protected then insert a blank tape.

Press [REC] button during playing of DVD.

DVD plays and VCR starts recording.

If you press STOP [ ] button in DVD mode, DVD and VCR will stop at the

same time.

If you press STOP [ ] button in VCR mode, VCR stops to record and DVD

continues to play.

“This product incorporates copyright protection technology that is protected by

U.S patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision,

and is intended for home and other limited viewing uses only unless otherwise

authorized by Macrovision. Reverse engineering or disassembly is prohibited.”

One Touch timer Recording (OTR)

✔ If you need to make an instant recording, or you want to record the current TV programme for a pre-

determined time , follow the procedures below.

First, follow the steps 1 to 4 in “Recording With VCR”.

Press [REC] button reference the “Recording Times Table” below.

Once

Twice

continuous recording until you press STOP button

recording for 30 mins from current time

3 (times) recording for 1 hour

Incrementing recording for 30 mins at each press.

recording for 10 hours

returning to the status of Once Press

To stop Recording mode, press [STOP] button more than 5 seconds.

Tuning in New Stations

✔ The TV and player are switched on.

✔ To see the picture from your player, press the input or AV (Audio/Video) button on the TV.

Tuning

PR PRESET

To complete the set-up of your video recorder when the

AUTO SET

auto set has not stored all of the channels or when you wish

MANUAL SET

PR ERASE

PR ALIGN

to store a new channel.

Call up the video’s "SETUP" menu, choose "PR PRESET".

PR+/-:SELECT

OK:CONFIRM

SETUP:END

Select "MANUAL SET".

MANUAL SET

PR01 P-O1 PR08 P-08

PR02 P-02 PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 P-05 PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

PR+/-:SELECT

OK:CONFIRM

SETUP:END

Choose any unused programme number "----" or "P-xx" ...

MANUAL SET

RECEPTION

AERIAL

It's best to use the same programme number on both the TV

and video.

AUTOSEARCH CH_ _

FINE TUNING

DECODER

NAME

_ _ _ _

PR+/-: UP/DOWN

✔

/✔: SELECT

... and confirm by selecting “OK” button.

OK:CONFIRM

SETUP:END

MANUAL SET

Set the station you want:

• the programme number;

• the broadcast system you want (Aerial(CH) or

Cable(CC)),

• You can directly enter the real channel number with the

RECEPTION

AERIAL

AUTOSEARCH CH 03

FINE TUNING

DECODER

NAME

_ _ _ _

PR+/-: UP/DOWN

✔

/✔: SELECT

OK:CONFIRM

SETUP:END

[0 to 9] buttons, or search by pressing [œ/√],

• The fine tuning you can adjust,

• When the programme is encoded (and you have a

decoder connected to socket EURO AV2), press the [œ or

√] to select ON or OFF.

• Change or create the station name.

MANUAL SET

Once you see the station you want, store it by selecting OK.

RECEPTION

AERIAL

AUTOSEARCH CH_ _

FINE TUNING

DECODER

NAME

Tune in further stations (from step 3 onwards) or exit

tuning mode.

_ _ _ _

PR+/-: UP/DOWN

0/1: CHANGE/CREATE

OK:CONFIRM

SETUP:END

Tuning in New Stations

Station names

✔ If your player is showing no station name or is showing a station name incorrectly, you can correct

this.

MANUAL SET

Call up this menu (see the previous page),

if it isn't displayed.

RECEPTION

AERIAL

AUTOSEARCH CH01

FINE TUNING

Select NAME position.

Press the [0] button to change the given name.

Or press the [1] button to create the station name.

DECODER

_ _ _ _

NAME

PR+/-: UP/DOWN

0/1: CHANGE/CREATE

OK:CONFIRM

SETUP:END

MANUAL SET

Either select the name from the stored list or

create the station name by entering 4 letters/digits.

Change the letters with the [PR +/–] buttons,

RECEPTION

AERIAL

AUTOSEARCH CH_ _

FINE TUNING

DECODER

NAME

_ _ _

move to the next letter with the [œ/√] buttons.

PR+/-: SELECT CHARACTER

✔

/✔: SELECT POSITION

OK:CONFIRM

SETUP:END

MANUAL SET

PR01 BBC1 PR08 SKYS

PR02 BBC2 PR09 MTVE

Store and exit.

PR03 ITV

PR10 P-10

PR04 CHA4 PR11 P-11

PR05 SKY1 PR12 ----

PR06 SKYN PR13 ----

PR07 SKYM PR14 ----

PR+/-:SELECT

OK:CONFIRM

SETUP:END

Sorting programme locations

If the location numbers used for programmes stored in your TV and player are different, you can change them on

the player. To do this, move the stations to the right numbers, until they are arranged the way you want.

PR ALIGN

PR01 BBC1 PR08 SKYS

Call up the player’s "SETUP" menu,

choose "PR PRESET" then "PR ALIGN".

PR02 BBC2 PR09 MTVE

PR03 ITV

PR10 P-10

PR04 CHA4 PR11 P-11

PR05 SKY1 PR12 ----

PR06 SKYN PR13 ----

PR07 SKYM PR14 ----

Select the programme to swap.

PR+/-:ALIGN

✔

:PR VIEW

OK:CONFIRM

SETUP:END

Confirm by pressing OK button.

Move the station to the desired location number.

Confirm by pressing OK button.

Clearing programme locations

PR ERASE

PR01 BBC1 PR08 SKYS

PR02 BBC2 PR09 MTVE

Call up the player’s "SETUP" menu,

choose "PR PRESET" then "PR ERASE".

PR03 ITV

PR10 P-10

PR04 CHA4 PR11 P-11

PR05 SKY1 PR12 ----

PR06 SKYN PR13 ----

PR07 SKYM PR14 ----

Select the station (location number) you want to clear.

PR+/-:SELECT

✔

:PR VIEW

OK:ERASE

Review the picture by pressing [œ] button.

SETUP:END

Clear by pressing OK button.

Timer Recording

✔ For timer recordings, clock, date, and stations must be set correctly.

✔ Load a cassette with its safety tab in place and with sufficient free space for the recording.

Timer recording using VideoPlus (SH-9840P only)

Call up the VideoPlus menu by pressing PROGRAM on the

remote control.

VIDEOPLUS

83077----

From your TV magazine, type in the number next to the

programme you want to record ...

0-9:VIDEOPLUS NUMBER

✔

:CORRECT

OK:CONFIRM

SETUP:END

... and confirm.

HOW OFTEN DO YOU WANT

TO RECORD THIS PROGRAM?

Decide if you want to record "ONCE", "WEEKLY" or "DAILY"...

... and confirm.

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)

DAILY(MON-SAT)

DAILY(MON-SUN)

PR+/-:SELECT

OK:CONFIRM

SETUP:END

If you wish to make changes:

TIMER PROGRAM (ONCE)

Move to the position you want to change using the [

buttons.

œ √]

START TIME

END TIME

21:20

22:20

14/08(SAT)

START DATE

TAPE SPEED

VPS/PDC

Change the setting using the [

setting are ok, press [OK], till you see “OK: CONFIRM” in the

bottom line.

Confirm.

…

†] or [number] buttons. If all

PR+/-:SELECT (AV1/AV2)

0-9 : SETUP (PR)

✔

/✔ :CORRECT

OK:CONFIRM

SETUP:END

Switch your player off.

•

VPS/PDC is a service provided by some stations to enable you to perform timer recordings

precisely even if the broadcaster delays the start time of the programme slightly. The time you enter

is the VPS/PDC time so must be correct. Not all stations offer VPS/PDC, in which case the player

will start at the time you enter and not the actual start time of the programme.

If you wish to start recording at a specific time without it being adjusted by the VPS/PDC system

in the event of a delay, switch VPS/PDC off otherwise the player will not record at the preset time.

• If you don’t have the VIDEOPLUS numbers see next page for the normal timer operation.

• If you have made a mistake, move back to the relevant position with the [ ] button and change

the setting.

• If there is no programme location displayed under “PR” in the change menu, the player doesn’t

yet know the location number for the programme you want. Type it in and this will be stored

for last recordings.

• If you wish to record from a satellite receiver, select under “PR” the satellite programme

location or AV (1/2) (depending on the connection with the antenna cable or the SCART-cable).

Leave the satellite tuner turned on and switched to the programme you want.

• Should programming overlap, you get a warning.

• To cancel the recording press the

button (stop) for more than 5 seconds.

• VIDEOPLUS is a trademark applied for by Gemstar Development Corp.. The VIDEOPLUS

system is manufactured under license from Gemstar Development Corporation.

Timer Recording

✔ For timer recordings, clock, date, and stations must be set correctly.

✔ Load a cassette with its safety tab in place and with sufficient free space for the recording.

Normal timer recording

HOW OFTEN DO YOU WANT

Call up the player’s "SETUP" menu and, choose "TIMER

PROGRAM".

Decide if you want to record "ONCE", "WEEKLY" or

"DAILY"...

TO RECORD THIS PROGRAM?

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)

DAILY(MON-SAT)

DAILY(MON-SUN)

PR+/-:SELECT

OK:CONFIRM

... and confirm.

SETUP:END

Type in one after the other:

• The programme location number;

• the time the broadcast starts,

TIMER PROGRAM (ONCE)

START TIME

END TIME

START DATE

TAPE SPEED

VPS/PDC

--:--

--/--

• the time the broadcast ends,

• the day of the broadcast, if it is not today.

• Select LP if you wish to make a long play recording .

• Switch off VPS/PDC here if you need to .

PR+/-:SELECT(AV1/AV2)

0-9 :SETUP(PR)

✔

/✔:CORRECT SETUP:END

If you wish to make changes:

TIMER PROGRAM (ONCE)

Move to the position you want to change using the

buttons. Change the setting using the [PR+/- ] or [number]

buttons.

[ /

œ √ ]

START TIME

END TIME

START DATE

TAPE SPEED

VPS/PDC

18:10

20:30

20/08(FRI)

PR+/-:SELECT(AV1/AV2)

If all settings are ok, press [

CONFIRM” in the bottom line.

Confirm.

or √], till you see “OK :

0-9 : SETUP (PR)

✔

/✔:CORRECT

OK:CONFIRM

SETUP:END

Switch your player off.

•

Wait a few seconds after typing a one-digit-number.

If you have made a mistake, move to the position you want to change using the [

and change the setting.

œ √] buttons

•

If programme timings overlap, the machine will give a warning message. If you don’t adjust

the times, the machine will record the first programme completely then continue with the

second one.

•

If there is no sufficient free space for the recording on the cassette the video switches

automatically to “LP” for double recording capacity.

The recorder will eject cassettes which have the safety tab removed.

• The player will be powered on and record the program at the set time.

• If the player is powered on after a timer recording has been set, the player cannot record in

VCR mode but can record in DVD mode.

Timer Recording

Timer Review – changing and erasing

TIMER PROGRAM

START END DATE

Call up the player’s "SETUP" menu,

choose "TIMER PROGRAM".

21:20 22:20 14/08

18:10 20:30 20/08

-- : -- -- : -- -- / --

PR+/-:SELECT

OK:CONFIRM

SETUP:END

TIMER PROGRAM (ONCE)

Select the programming you wish to change or

erase.

If you want to erase this programming press

button [0], confirm with OK.

If you wish to make changes:

START TIME

END TIME

21:20

22:20

14/08(SAT)

START DATE

TAPE SPEED

VPS/PDC

0 :ERASE

✔

/✔:CORRECT SETUP:END

Move to the position you want to change using the

[ /

œ √] buttons.

Change the settings using the [PR +/–] or

[number] buttons.

If all settings are ok, press [

or √], until you see

"OK: CONFIRM" in the bottom line.

Confirm changes with [OK]. Exit the menus.

More Functions

✔ The counter counts in real time from the point you load the cassette. This does not have to be its

beginning! The counter does not count unrecorded parts of the tape.

✔ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).

Clock / counter display

STOP SP

PR01 BBC1

STEREO ON

Each time you press [DISPLAY] button,

1x: Time and date+current status Time and date

counter

✔

2x: Counter+current status

3x: disappear.

✔

14:00 08/08

E180 00:48

•

If the tape is not wound (PLAY, FF, REW,...), the tape remaining time does not appear.

If the timer recording information is contained within the received broadcast signal , press the button to

display the VPS/PDC icon within the received broadcast signal.

Remaining time and cassette length

Call up the player’s "SETUP"

menu,choose "TAPE CONTROL".

TAPE CONTROL

TAPE REMAIN

GO TO ZERO

COUNTER RESET

INDEX+

E-180

E-240

E-300

• Remaining time display is only

possible when the cassette is

loaded.

INDEX-

PR+/-:SELECT

OK:CONFIRM

PR+/-:SELECT

E-240 01:27

SETUP:END

OK:CONFIRM

SETUP:END

When you want the player to show the time remaining from the current player tape position (to find out if

there is sufficient space for a recording, for example).

To ensure the remaining time shown is accurate, select from the list given in the menu the cassette tape

length currently being used.

Searching a recorded programme with index

When you record a programme, the VCR places an index mark at the start

of the recording.

To search fo an index mark

1. Call up the player’s "SETUP" menu, choose "TAPE CONTROL"

2. Choose index + to search forward or index - to search backward.

The VCR will locate your index mark and begin playback.

TAPE CONTROL

TAPE REMAIN

GO TO ZERO

COUNTER RESET

INDEX+

INDEX-

PR+/- :SELECT

OK:CONFIRM

SETUP:END

More Functions

Accessing counter zero position

REW SP

GO TO ZERO

The player will wind to the position 0:00:00 and stop.

0:02:13

Resetting the counter to zero

COUNTER RESET

Reset the counter.

0:00:00

16 : 9 Wide Screen Format Playing back / Recording

VCR SETUP

Using this player you can play and record programmes having 16:9 Wide-Screen

format.

CLOCK SET

RF OUTPUT SET

16:9 SET

OSD ON/OFF

AUTO CLOCK

• 16:9 Set

PR+/-:SELECT

OK:CONFIRM

-Auto : This video automatically detects the programme format (16:9 or 4:3) and

records or plays this programme in the same format.

SETUP:END

-ON : The video will play or record all broadcasts in 16:9 format. 4:3 broadcasts will

be converted to 16:9 format.

16:9 SET

-OFF : The video will play or record all broadcasts in 4:3 format only.

AUTO

OFF

•

If you watch a programme which is recorded in 16:9 wide screen format with

this player, your TV must have 16:9 wide screen function and you have to

connect the TV and player with the A/V scart cable.

PR+/-:SELECT

OK:CONFIRM

SETUP:END

AUTO REPEAT

If you press the [PLAY] button for 5secs during stop or still mode, Auto repeat mode is engaged. This player

then repeatedly plays the tape from beginning to end.

To release this mode, press the [ ] button or mode operation button. (PLAY, FF, REW or STOP)

More Functions

Child lock

Press the [ ] button for about 5 seconds.

No buttons on the front panel can be operated now and LOCK INDICATOR

(“

”) will be displayed on the window display. Keep your remote control in a

safe place.

To release child lock, press any button on the remote control.

Cassettes

Use only good quality tape cassettes with the VHS logo.

PAL

•Keep cassettes away from excessive moisture or dust, magnetic and electrical fields

(loud speakers and computer monitors, for example).

•Always wind the tape to the beginning when you have finished. Store with the full

spool at the bottom and with the cassette in its cover.

You can protect your precious recordings from being wiped by breaking out the safety

tab on the back of the cassette (some cassettes have a slide). Should you wish to re-use

the tape after removing the tab, cover the hole with adhesive tape.

and ...

Dimmer : Your player dims its display when switched to stand-by mode.

Auto power off : Your player switches to stand-by after 5 minutes, if no tape is played and no tuning signal is

received.

More Functions

✔ The player records the complete sound signal transmitted by the TV station.

✔ On the mono VCR, you will hear the normal mono sound.

The Hi-Fi system (SH-9810P &SH-9840P only)

In addition to the normal mono sound track of VHS video recorders, your player is equipped with a high-

quality Hi-Fi sound system.

This means you can enjoy

• films with excellent stereo sound

• films of full-length concerts in high quality stereo

• films with impressive Surround Sound using additional Surround equipment

• films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track

• VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound

What you can listen to (SH-9810P &SH-9840P only)

STOP SP

PR10 EURO

STEREO ON

During Stop, the player displays what the current station is broadcasting. When

you switch to another station or the current station changes the sound mode, your

player displays the programme and sound mode on screen (if not, press AUDIO).

• “STEREO” = stereo

“BIL I / BIL II ”=bilingual

nothing= monaural sound

PLAY

Hi-Fi

L+R

During Playback, the player displays what is recorded on

the cassette (if not, press AUDIO).

• “Hi-Fi” = stereo/bilingual

nothing = monaural sound

Choice of sound output (SH-9810P &SH-9840P only)

During a stereo performance (playback-”Hi-Fi”/ broadcast

- “STEREO”):

Hi-Fi stereo ✔✔ left audio channel only ✔✔right channel

only ✔✔the normal mono sound track of a Hi-Fi cassette

PLAY

Hi-Fi

L+R

HI-Fi

LEFT

Hi-Fi

RIGHT

Hi-Fi

OFF

• During broadcasting a bilingual performance : Main

STOP SP

PR10 EURO

BIL

language (original sound track)

✔

sub-language

BIL

(dubbed)

OFF.

✔

both main language and sub-language

✔

BIL

I+II

BIL

OFF

• For mono performances , there is no choice available.

Connections and Copying

✔ If you are using a SCART cable, select the AV input on the TV to see the picture from the player.

✔ If you are not using a SCART cable, select the programme number on the TV reserved for video

input to see the picture from the player.

To the TV via antenna cable (if you are not using a SCART cable)

If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial

cable. Just tune the TV to the player's transmitting channel (factory set to UHF CH 52). Tune the TV carefully to

ensure the best pictures and sound.

Once you have carried out the steps in "Connecting up the player" , switch

on your TV.

Press the [ENTER] button of the player’s remote control for longer than 5

seconds to call up the player´s test signal.

Tune the TV to the test signal using the channel pre-set functions of your

TV as described in its manual.

When you have found the test signal, store it under the channel number

on your TV for player input.

Press the [ENTER] button of the player’s remote control again for longer

than 5 seconds to remove the test signal.

• If the quality of the test signal transmitted to the TV is poor due to

interference caused by a station transmitting on channel 52, you can tune

RF OUTPUT SET

the player to a different transmitting channel. Find a free channel

between 21 and 69 on your TV.

Call up the player’s "SETUP" menu, choose "VCR SETUP" then "RF

OUTPUT SET".

0-9:SELECT (21-69)

OK:CONFIRM SETUP:END

Type in the free channel.

Store and exit.

•

If the quality of the test signal transmitted to the TV is poor, fine-tuning on the TV may help

(refer to the TV manual).

Without a scart cable, you will not get stereo sound from a TV capable of stereo sound.

Connections and Copying

✔ Switch off all components when connecting or disconnecting cables.

Copying

To copy to your player from another video

machine, connect the two machines with a cable

between their EURO AV (SCART) sockets and

select as programme "AV 1/AV 2" or “F. AV”

(front sockets) using the [AV], [PR+/-] or [INPUT]

button.

Other VCR

Decoder for Pay-TV

Camcorder

Video Player

Satellite Receiver

Set the other video machine to playback and your

machine to record.

•To connect a mono audio source, use the front

Audio In socket marked L.

To copy to another video machine from your

player, connect the two machines by means of

their EURO AV (SCART) sockets.

On the other video, select its AV input and set the

machine to record.

Switch your player to play back at the position you

want copying to start.

Audio Amp.

devices

(other VCR)

Assembling

Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique

for smooth edit points:

•

The symbol is lit in VCR mode and goes out in TV

mode.

•

This symbol means the cassette is in.

This symbol means a timer recording is setting.

For the best results, the source cassette from which

you are recording should already be playing back

when you start recording.

Playing a desired scene

To skip scenes in a disc

To move to next chapter (or track), press [√√✔NEXT] button.

The current chapter (or track) moves to the next chapter (or track).

Press [✔œœ PREV] button.

The current scene moves to the previous chapter (or track) or first scene of current

chapter (or track).

Moving directly to a desired title

✔

Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE/PBC] or

[MENU] button can be used to select the movie title. Details of operation may differ depending on the disc used.

* Selecting a title may not be available on certain DVD discs.

Press the [TITLE/PBC] or [MENU] button.

A list of the titles on the disc is displayed.

* For the case of VCD disc, menu screen will

appear only when the disc has PBC function

and PBC ON is activated.

Press the [ENTER] button or [PLAY] button

after pressing the [œ √…†] button to select

the desired title.

For the case of VCD disc, press the [Number]

button.

The selected title now starts playing.

Playing a desired scene

Repeating a defined period

Each time you press [REPEAT] button in playback mode, repeat playback starts as below.

- DVD -

- VCD -

- CD/MP3 -

✔

Repeat one

CHAPTER

TRACK

Repeat all

Random

OFF

TITLE

OFF

ALL

OFF

•

CHAPTER : Current chapter will play repeatedly.

TITLE : Current title will play repeatedly.

TRACK : Current track will play repeatedly.

ALL : Current disc will play repeatedly.

• Repeat one : Current file will play repeatedly.

• Repeat all : All files on the disc will play repeatedly.

• Random : Tracks on the disc will play in random order.

•

OFF : Repeat playback will be cancelled.

* For the case of VCD disc, repeat playback starts only in PBC OFF mode.

Repeating a defined period from A to B

✔ You may repeat a defined period from A to B.

At the point where you want to start the repeat

playback period, press [A-B] button.

A-

A MP3 disc may

not be repeated

from A to B.

The figure shown on the right appears and the repeat

playback start position (A) is set.

At the point where you want to end the repeat

playback, press [A-B] button again.

A-B

The repeat playback end position (B) is set and the

repeat playback period from A-B is defined.

To exit from repeat playback mode, press [A-B] button.

OFF

Repeat playback mode is cancelled and Normal Playback

mode is resumed.

Playing a desired scene

Searching DVD with a title number, a chapter number or a time

current title

number

If you want to search with a title number, press

[SEARCH] button one time.

001/003

It shows current and total title numbers. Please enter

the new title number to be searched using the

[NUMBER] buttons.

total title

number

current chapter

number

If you want to search with a chapter number,

press [SEARCH] button twice.

It shows current and total chapter numbers.

Please enter the new chapter number to be searched

using the [NUMBER] buttons.

001/023

total chapter

number

If you want to search with a time, press

[SEARCH] button three times.

01:03:20

current time

Please enter the new time to be searched using the

[NUMBER] buttons.

After completing the enteries, please press

[ENTER] button.

PLAY starts from the selected position.

Playing a desired scene

Searching VCD with a track or track time

If you want to search with a track number, press

[SEARCH] button once.

current track

number

If PBC is OFF, the screen like the figure to the right

001/013

appears. It shows current and total track

numbers. Please enter the new track number to

be searched using the [NUMBER] button.

total track

number

* If PBC is ON, pressing track number converts PBC to

OFF mode automatically.

If you want to search with a track time, press

[SEARCH] button twice.

01:03:20

If PBC is OFF, the screen like the figure to the right

appears.

current time

It shows total track time.

Please enter the new time to be searched using the

[NUMBER] button.

After completing the enteries, please press

[ENTER].

PLAY starts from the selected position.

Storing markers in memory to be viewed (listened to) again

✔ Storing a MARKER in the DVD memory is similar to marking your page in a book. It allows you to

quickly return to any point on the disc.

Storing a marker in the memory.

1 - - - - - - - -

Press [MARK] during play and press

[PROGRAM] at the starting point of the section

to be viewed (listened to) again.

Recalling/ Clearing a marker

Press [MARK] during playback. Press [œ √] to select the marker to be

recalled/cleared.

Press [ENTER] to recall a marker. Or press [CLEAR] to clear a marker.

Play resumes from the point corresponding to the selected marker, or the

selected marker is cleared.

Confirming the current PLAY mode on screen

Confirming the current DVD disc mode

While in playing, press [DISPLAY] button.

It shows the current disc mode.

If you want to change the mode, select the item with up/down (…†) cursor and enter

the new settings with [number], [œ] or [√] button. After completing the enteries, press

[ENTER] button.

To exit from Display mode, press [DISPLAY] button again.

✔ current title / total title

✔ current chapter / total chapter

✔ time elapsed

✔ subtitle selected / current subtitle / total subtitle

✔ audio language selected / current / total audio language

✔ repeat playback mode

001/003

001/023

00:01:03

ENG 01/01

ENG 01/03

OFF

✔ current angle / total angle

01/01

0-9

Confirming the current PLAY mode on screen

Confirming the current VCD disc mode

While in playing, press [DISPLAY] button.

It shows the current disc mode.

If you want to change the mode, select the item with up/down (…†) cursor and enter

the new settings with [number], [œ] or [√] button. After completing the enteries, press

[ENTER] button.

To exit from Display mode, press [DISPLAY] button again.

001/003

00:01:03

OFF

✔ current track / total track number

✔ time elapsed

✔ repeat playback mode

✔ PBC mode

0-9

Confirming the current CD, MP3, JPG, MPG disc mode

It shows the current disc mode.

If you want to change the mode, select the item with up/down (…†) cursor and enter

the new settings with [number], [œ] or [√] button. After completing the enteries, press

[ENTER] button.

MUSIC

✔ 000/000 0:00:00 / 0:00:00

✔ disc mode / current playback file name

✔ current track / total track number,

time elapsed / total time, repeat playback mode

✔

MUSIC file select

JPG file select

✔

LIST PROGRAM

max 6

SKY

MPG file select

winamp

_ _ _ _

_ _ _

_ _ _ _ _

_ _ _

_ _ _ _ _

✔ current cursor file name

* For more information, refer to 43-46p.

Selecting an AUDIO language,

SUBTITLE language and 3D AUDIO

Selecting an audio language

✔ The user may select an audio language and subtitle language if a disc includes Multi-language.

Keep pressing [AUDIO] button till the user’s preferred language appears in

A certain disc

playback mode.

may not support audio

select or subtitle select.

If DVD disc includes audio information, every time the user presses [AUDIO] button,

English (ENG), French (FRE), Spanish (SPA) and others appear sequentially.

ENG 01/03

Selecting a subtitle language

Keep pressing [SUBTITLE] button till the user’s preferred language appears in

playback mode.

If a DVD disc includes subtitle information, every time the user presses [SUBTITLE]

button, English (ENG), French (FRE), Spanish (SPA), ... and OFF appear sequentially.

ENG 01/01

Selecting 3D Audio

✔ You can enjoy a virtual 3D sound effect from 2-channel sources.

Press [3D].

Every time you press [3D], the 3D sound toggles

between 3D ON › 3D OFF.

OFF

Selecting ZOOM and Multi Angle

Using a zoom function

✔ The user can enlarge the current screen about 2 or 4 times.

Keep pressing [ZOOM] button till the preferred zoom appears.

Every time the user presses [ZOOM] button, the zoom magnification changes 2 times

• During zoom mode,

subtitle language

can’t be seen.

(X2)

✔

4 times (X4)

✔

OFF

✔

2 times (X2)

✔

... in sequence.

A base area to be enlarged is centralised and the area can be changed with the operation

of the [œ √…†] buttons.

Different Angle

✔ If a disc includes multi angle information, the user can watch a screen in multi angles. The function is limited

to a DVD disc supporting multi angle information.

Keep pressing [ANGLE] button till the preferred

01/01

angle appears.

Every time the user presses [ANGLE] button, the

angle changes by degrees in consecutive order.

About MP3, CDDA, JPG and MPG discs

Playing a disc containing MP3 or CDDA files

This unit will play MP3 or CDDA files recorded on CD-R and CD-RW discs.

Turn on your television and select the channel assigned to this DVD player.

Press the DVD open [OPEN/CLOSE] button, the disc tray opens.

Put a MP3 or CDDA disc on the disc tray with the label side up.

Press the DVD open [OPEN/CLOSE] button, the disc tray closes.

The unit will take a short while to load the disc and display the directory structure.

The figure shown below appears.

MUSIC

✔ 000/000 0:00:00 / 0:00:00

LIST

PROGRAM

max 6

SKY

winamp

_ _ _ _

_ _ _

_ _ _ _ _

_ _ _

_ _ _ _ _

Select the folder.

MUSIC

✔ 000/000 0:00:00 / 0:00:00

Move the cursor to desired folder by

pressing [œ √…†] button and press

[ENTER] button to confirm.

LIST PROGRAM

max 6

SKY

winamp

_ _ _ _

_ _ _

_ _ _ _ _

_ _ _

_ _ _ _ _

Select the file to listen to (or view).

MUSIC > MP3

√ 001/018 0:00:34 / 0:03:59

Move the cursor to file which you want to

listen to (or view) by pressing [œ √…†

button

LIST

_ _

PROGRAM

]

mp3

1. 01(musicfamily.i

2. 02(musicfamily.i

3. 03(musicfamily.i

4. 04(musicfamily.i

5. 05(musicfamily.i

6. 06(musicfamily.i

7. 07(musicfamily.i

mp3

Press [PLAY] or [ENTER] to start playback.

The selected file will play.

\max 6\01(musicfamily.i.am) Smooth-

Press [✔✔] to stop playback.

* Only MP3 or CDDA file is listed.

About MP3, JPG and MPG discs

Repeat playback mode.

MUSIC > MP3

√ 001/018 0:00:34 / 0:03:59 Repeat one

Every time you press [REPEAT], repeat

playback mode changes as follows: Repeat

one ✔✔Repeat all ✔✔Random ✔✔OFF ✔✔...

LIST

_ _

PROGRAM

mp3

1. 01(musicfamily.i

2. 02(musicfamily.i

3. 03(musicfamily.i

4. 04(musicfamily.i

5. 05(musicfamily.i

6. 06(musicfamily.i

7. 07(musicfamily.i

Or select

by pressing [√ †] and press

[ENTER].

The selected file or folder will playback

repeatedly.

\max 6\01(musicfamily.i.am) Smooth-

You can programme playback.

MUSIC > MP3

√ 001/018 0:00:34 / 0:03:59 REPEAT FILE

Select the file to programme. Then press

[PROGRAM].

LIST

PROGRAM

mp3

_ _

mp3

6. 06(musicfamily.i

The selected file will go into PROGRAM

folder.

mp3

1. 01(musicfamily.i

2. 02(musicfamily.i

3. 03(musicfamily.i

4. 04(musicfamily.i

5. 05(musicfamily.i

6. 06(musicfamily.i

7. 07(musicfamily.i

2. 02(musicfamily.i

5. 05(musicfamily.i

Press [PLAY] or [ENTER] in PROGRAM

folder.

mp3

If you want to delete all the files in the

\max 6\02(musicfamily.i.am) Lager T

PROGRAM folder, select

] and press [ENTER].

by pressing [√

†

If you want to delete one file, press

[CLEAR] button.

The ability of this unit to read MP3 discs is dependent on the followings:

•

The Bit Rate must be within 64-256 kbps.

The maximum number of directories should not exceed 32.

The maximum depth level of directories should not exceed 4.

In the case that the file is recorded with a variable bit rate (VBR) in one file (Example: 54-256kbps) sound

breakup sound breaking may occur during playback.

•

File names should be named using 8 or fewer letters and/or numbers, and must incorporate the

“MP3” file extension. EXAMPLE:

. MP3 where each is a letter or number.

********

Use only letters and/ or numbers in file names. If you use special characters, the file and/ or folder

names may not be displayed correctly on the on-screen display.

Caution

•

Try to avoid the use of the CD-RW(Rewritable) disc if possible because it can not be played back

according to the recording format.

•

A CD-R must be recorded with the standard format because it can not be played back according to

any other recording format.

•

A CD-R should be written using the ‘disc at once’ method.

A disc which is made according to the ISO 9660 format can be played back.

About MP3, JPG and MPG discs

Playing a disc containing JPG (PHOTO) files

This unit will play JPG files recorded on CD-R and CD-RW discs.

PICTURE > JPG

✔ 000/000 0:00:00 / 0:00:00

Select the desired folder.

Move the cursor to the desired

LIST

PREVIEW

folder by pressing […†] and

press [ENTER] to confirm.

DESKTOP

PHOTO

TEMPORAR

TRASH

PICTURE > JPG

✔ 000/000 0:00:00 / 0:00:00

Slideshow Delay Time set.

Select “

Slideshow &Delay

LIST

PREVIEW

Time” function. Then press

jpg

[ENTER] to adjust the slideshow

delay time from 0FF to 10 seconds.

1. BAK001

2. BAK002

3. BAK003

4. BAK004

5. BAK005

6. BAK006

7. BAK007

* Only JPG file is listed.

\PHOTO\320\BAK001.JPG

Start the slideshow of file.

✔✔✔✔✔✔✔✔✔

If you press [PLAY] or [ENTER]

when a JPG image is selected, a

slideshow will begin automatically

starting from the selected image.

• To stop the slideshow, press

[STOP].

To turn left, press [

To turn right, press [

12/134 œ 90°

√ 90°

✔

œœ √√

✔

√/

✔✔

✔ DISPLAY

√

To skip to next screen (or file), press [√√✔].

To skip to previous screen (or file), press [✔œœ ].

Combination Play set.

PICTURE > JPG

✔ 000/000 0:00:00 / 0:00:00

Select “ Combination Play”

function.

LIST

PREVIEW

jpg

Then press [ENTER] or [PLAY]

to enter into the playback of total

files.

1. BAK001

2. BAK002

3. BAK003

4. BAK004

5. BAK005

6. BAK006

7. BAK007

jpg

A combination play will begin.

\PHOTO\320\BAK001.JPG

About MP3, JPG and MPG discs

Playing a disc containing MPG (MOVIE) files

This unit will play MPG files recorded on CD-R and CD-RW discs.

MOVIE

✔ 0/00 0:00:00 / 0:00:00

Select the desired folder.

Move the cursor to the desired

LIST

PREVIEW

folder by pressing […†] and

press [ENTER] to confirm.

DESKTOP

MOVIE

TEMPORAR

TRASH

Select the desired MPG file.

MOVIE

✔ 0/00 0:00:00 / 0:00:00

Move the cursor to the desired

LIST

PREVIEW

MPG file. Then press [ENTER] or

[PLAY] button to playback.

mpg

1. BAK001

mpg

2. BAK002

mpg

3. BAK003

mpg

4. BAK004

mpg

5. BAK005

* Only MPG file is listed.

mpg

6. BAK006

mpg

7. BAK007

\MOVIE\320\BAK001.MPG

Start the playback of MPG file.

✔✔✔✔✔✔✔✔✔

If you press [ENTER] or [PLAY]

button, selected MPG file starts

playback.

If you press [DISPLAY] button, it

shows the current disc mode.

001/003

00:01:03

OFF

✔ current track / total track number

✔ time elapsed

✔ repeat playback mode

0-9

• To stop the playback, press [STOP].

• To skip to next movie (or file), press [√√

✔ ].

• To skip to previous movie (or file), press [

✔œœ].

• To view fast forward playback, press [√√].

• To view fast reverse playback, press [œœ].

Displaying menus on a disc

To display menus on a disc

✔ If a disc includes menus, the user may display them.

Press [MENU] button.

•

In the case of a DVD disc, it shows the menus on the disc. Also they are

different according to the discs.

•

If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button.

* CD and VCD1.1 do not support the function.

If it is a DVD disc, move the cursor to the relevant item with the arrow buttons

œ √…†] and select one with [ENTER] button or [PLAY] button.

[

Language Setup

✔ A user can set OSD language, Audio, Subtitle and Disc Menu.

While in STOP or RESUME STOP mode, press

[SETUP] button.

OSD

AUDIO

SUBTITLE

DISC MENU

ENGLISH

AUTO

OFF

AUTO

“OSD” means

“On Screen Display”.

Selecting an OSD language.

OSD

AUDIO

SUBTITLE

DISC MENU

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

✔

Select an OSD language to be displayed on DVD

menus with [ENTER].

PORTUGUESE

SWEDISH

DUTCH

Selecting Audio language.

OSD

AUDIO

SUBTITLE

DISC MENU

FRENCH

SPANISH

GERMAN

ITALIAN

PORTUGUESE

SWEDISH

DUTCH

Set your preferred audio language with

[ENTER]. If the audio language is set and

recorded on the DISC, it is automatically played

back in the set language every time it is played.

In case a disc

does not include

setting languages

AUTO

✔

information, the

selected language does

not appear.

OTHERS - - - - : Another language can be

selected. You can input a 4-digit language code.

Refer to the language codes on next page. Press [CLEAR] if an

incorrect language code is entered.

OSD

AUDIO

SUBTITLE

DISC MENU

SPANISH

GERMAN

ITALIAN

PORTUGUESE

SWEDISH

DUTCH

AUTO

✔

OTHERS - - - -

Selecting Subtitle language.

OSD

FRENCH

AUDIO

SUBTITLE

DISC MENU

SPANISH

GERMAN

ITALIAN

PORTUGUESE

SWEDISH

DUTCH

Set your preferred subtitle with [ENTER]. If the

subtitle language is set and recorded on the

DISC, it is automatically played back in the set

language every time it is played.

OFF

✔

OTHERS - - - - : Another language can be

selected. You can input a 4-digit language code.

Refer to the language codes on next page. Press [CLEAR]

if an incorrect language code is entered.

OSD

AUDIO

SUBTITLE

DISC MENU

SPANISH

GERMAN

ITALIAN

PORTUGUESE

SWEDISH

DUTCH

OFF

✔

OTHERS - - - -

Language Setup

Selecting Disc Menu language.

OSD

AUDIO

SUBTITLE

DISC MENU

FRENCH

SPANISH

GERMAN

ITALIAN

PORTUGUESE

SWEDISH

DUTCH

Set your preferred DISC MENU language with

[ENTER]. If the DISC MENU language is set and

recorded on the DISC, it is automatically played

back in the set language every time it is played.

AUTO

✔

OTHERS - - - - : Another language can be

selected. You can input a 4-digit language code.

Refer to the language codes. Press [CLEAR] if an

incorrect language code is entered.

OSD

AUDIO

SUBTITLE

DISC MENU

SPANISH

GERMAN

ITALIAN

PORTUGUESE

SWEDISH

DUTCH

AUTO

✔

OTHERS - - - -

Table of language and Their Abbreviations

Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE”

and/or “DISC MENU”.

Code Language

6565 Afar

6566 Abkhazian

6570 Afrikaans

6577 Ameharic

6582 Arabic

6583 Assamese

6588 Aymara

6590 Azerbaijani

6665 Bashkir

6669 Byelorussian

6671 Bulgarian

6672 Bihari

Code Language

6983 Spanish

6984 Estonian

6985 Basque

7065 Persian

7073 Finnish

7074 Fiji

7079 Faroese

7082 French

7089 Frisian

7165 Irish

Code Language

7473 Yiddish

7487 Javanese

7565 Georgian

7575 Kazakh

7576 Greenlandic

7577 Cambodian

7578 Kannada

7579 Korean

7583 Kashmiri

7585 Kurdish

Code Language

7789 Burmese

7865 Nauru

7869 Nepali

7876 Dutch

7879 Norwegian

7982 Oriya

8065 Panjabi

8076 Polish

8083 Pashto, Pushto

8084 Portuguese

8185 Quechua

Code Language

8385 Sundanese

8386 Swedish

8387 Swahili

8465 Tamil

8469 Telugu

8471 Tajik

8472 Thai

8473 Tigrinya

8475 Turkmen

8476 Tagalog

8479 Tonga

7168 Scots Gaelic 7589 Kirghiz

7176 Galician

7665 Latin

8277 Rhaeto-Romance 8482 Turkish

6678 Bengali;Bangla 7178 Guarani

7678 Lingala

7679 Laothian

7684 Lithuanian

7686 Latvian, Lettish 8368 Sindhi

7771 Malagasy

7773 Maori

8279 Romanian

8285 Russian

8365 Sansrit

8484 Tatar

8487 Twi

8575 Ukrainian

8582 Urdu

8590 Uzbek

8673 Vietnamese

8679 Volapük

8779 Wolof

8872 Xhosa

8979 Yoruba

9072 Chinese

9085 Zulu

6679 Tibetan

6682 Breton

6765 Catalan

6779 Corsican

6783 Czech

6789 Welsh

6865 Danish

6869 German

6890 Bhutani

6976 Greek

7185 Gujarati

7265 Hausa

7273 Hindi

7282 Croatian

7285 Hungarian

7289 Armenian

7365 Interlingua

7378 Indonesian 7778 Mongolian

7383 Icelandic

7384 Italian

8372 Serbo-Croatian

8373 Singhalese

8375 Slovak

8376 Slovenian

8377 Samoan

8378 Shona

8379 Somali

8381 Albanian

8382 Serbian

7775 Macedonian

7776 Malayalam

7779 Moldavian

7782 Marathi

7783 Malay

6978 English

6979 Esperanto

7387 Hebrew

7465 Japanese

7784 Maltese

Video Setup

✔ A user can set up a connected TV and screen size condition.

While in STOP or RESUME STOP mode,

TV ASPECT

4:3 LB

press [SETUP] button.

Selecting TV Aspect.

TV ASPECT

4:3 LB

✔

Set your preferred TV ASPECT ratio with

[ENTER] button.

4:3 PS

16:9 WIDE

If a user selects “4:3 PS”, the user can watch

only a centre of the original scene of “16:9”. If a

user selects “4:3 LB”, the user can watch the

original scene of “16:9”, but the top and bottom

of the screen look black color.

If a disc size is originally recorded in 4:3, the

user cannot watch it in the wide screen format

even though the user has set it to “16:9 Wide”.

Audio Setup

✔ A user may select an audio menu according to the speaker set being used.

While in STOP or RESUME STOP mode,

press [SETUP] button.

DIGITAL OUT BITSTREAM

DYNAMIC RANGE OFF

Select a Digital Output.

DIGITAL OUT BITSTREAM

✔

Set audio output to coaxial or optical. You

can set the outgoing digital signal to

DYNAMIC RANGE

LPCM

BITSTREAM or LPCM:

• BITSTREAM : The raw audio signal

recorded on the disc goes to the digital

audio output.

• LPCM : The decoded audio signal goes

to the digital audio output.

Select a Dynamic Range.

DIGITAL OUT

DYNAMIC RANGE

You can set the Dynamic Range as follows:

FULL

OFF

• Off : You can hear the sound as it was

originally recorded on the disc.

✔

• Full : You can hear loud sounds softer

and soft sounds louder.

Other Setup

While in STOP or RESUME STOP mode, press

OSD

SCREEN SAVER ON

[SETUP] button.

DEFAULTS

PARENTAL

PASSWORD

RESET

8 ADULT

Select character display window.

OSD

OFF

✔

SCREEN SAVER

DEFAULTS

PARENTAL

PASSWORD

Select "On" to make the OSD (On Screen Display)

language appear on screen.

Select screensaver.

OSD

SCREEN SAVER

DEFAULTS

PARENTAL

PASSWORD

OFF

✔

If bright scenes continue to be displayed on

screen, the TV can be damaged. If the screen

saver is set to “ON” and the resume stop, stop, or

open status is maintained for about 5 minutes, the

screensaver will function automatically causing

the DVD logo to move continuously.

Restoring DEFAULTS.

OSD

If you press [ENTER] when the cursor

highlights RESET, an “Are you sure?”

message will appear. Confirm with [OK].

SCREEN SAVER

DEFAULTS

PARENTAL

Are you sure?

RESET

PASSWORD

This feature resets every function to its

original Factory Defaults except the Parental

Control settings.

CANCEL

Select Parental.

OSD

1 KIDS

2 G

3 PG

4 PG-13

5 PG-R

6 R

7 NC-17

8 ADULT

Press [√] button when the cursor is

highlighting PARENTAL.

SCREEN SAVER

DEFAULTS

PARENTAL

PASSWORD

When “INPUT PASSWORD” appears on the

screen, input the password.

✔

Change Parental Rating level.

OSD

1 KIDS

2 G

3 PG

4 PG-13

5 PG-R

6 R

7 NC-17

8 ADULT

Once you have entered the correct

password, you can change the PARENTAL

rating by pressing […†]. And confirm it

with [ENTER].

SCREEN SAVER

DEFAULTS

PARENTAL

PASSWORD

These 8 levels of parental control, protect

children from watching violence, sexual

scenes and other objectionable material.

✔

Other Setup

Changing a password.

OSD

SCREEN SAVER

DEFAULTS

PARENTAL

PASSWORD

To change your password, move the cursor

to “PASSWORD” and press [√].

Enter your current password.

INPUT PASSWORD

- - - -

CANCEL

Then enter a new password and press

[ENTER].

OSD

SCREEN SAVER

DEFAULTS

PARENTAL

PASSWORD

INPUT PASSWORD

- - - -

Confirm the new password.

OSD

SCREEN SAVER

DEFAULTS

PARENTAL

PASSWORD

CONFIRM PASSWORD

- - - -

OSD

Now your password is changed.

SCREEN SAVER

DEFAULTS

PARENTAL

PASSWORD

CHANGE OK

The initial password is 3308. In case you forget the newly-entered password, you can use 3308 as a

password.

“Parental Lock” activates only if you set a password and the unit goes into Lock status. When the

disc has no parental function even if the disc is for adults only, the Parental Lock doesn’t activate.

About DVD

Playable Discs

• DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD

Disc type

DVD

Playable

Possible

Impossible

Possible

Restriction

Region number 2 or Region number All

Version 1.0/1.1/2.0, SVCD

PCM or dts

Video CD

CD-ROM

CD-R

MP3 File

Video-CD/CD/CD-ROM (MP3 File)

DVD Video

CD-RW

DVD-R

DVD-RW

DVD+RW

DVD-ROM

DVD-RAM

Photo CD

DVD Video

except KODAC CD

REGION MANAGEMENT INFORMATION

This unit is designed and manufactured to respond to the Region Management information that is

recorded on a DVD disc. The region number of this player is “2”. If the region number described on the

DVD discs does not correspond to the Region number of this player, the player will not play this disc.

This player will play DVD discs made for “ALL” regions. Therefore, this player will play DVD discs

marked with labels containing the region number “2” or “ALL”.

ALL

(Region 2)

(Region ALL)

About DVD

Terms related to DVD

DVD

A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video

information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages. By

using MPEG-2 video compression and digital 3D surround sound, DVD realizes high-definition video

and quality sound like a movie theatre.

CDDA

MP3

A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.

Audio compression format that enables audio files to be stored and transferred on a computer with a

relatively small file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer 3)

PBC

This is recorded on a Video CD 2.0, Video CD 3.0 and SVCD. The scenes or information to be viewed (or

listened to) can be selected interactively with the TV monitor by looking at the menu shown on the TV

monitor. It stands for PlayBack Control.

CHAPTER A title in a DVD is divided into many tracks, or chapters. A chapter is an area on the DVD to

which you can navigate using the remote control to locate special electronic markers. The DVD

player can then locate any particular scene and skip directly to it.

TITLE

TRACK

dts

This is the information recorded on a DVD. A DVD can be divided into many titles.

In a video CD and audio CD. A disc consists of many tracks. The user can search for these tracks.

Digital Theatre System is a 5.1 -channel surround sound system, which is widely used in movie

theatres around the world. It enables the bit rate to be increased to provide good sound quality.

“DTS” and “DTS Digital Out” are trademarks of Digital Theatre Systems, Inc.

Multi Angle Some DVD discs contain various scenes that have been simultaneously shot from a number of

different angles.

PCM

Linear PCM is a signal-recording format used in a CD, while CD is recorded in 44.1kHz/16bit, a

DVD is recorded in 48KHz/16bit up to 96KHz/24bit.

Dolby DigitalDolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32 kbps

to 640 kbps, thus offering flexibility and economical performance as well as uncompromised

sound quality.

Bitstream

Lt/Rt

Digital audio data that is decoded into an analogue signal for subsequent output to speakers.

It indicates L/R of Dolby Digital 2CH Downmix output.

Downmix

DOWNMIX is reproducing the proper audio when audio format recorded on a disc differs from

the output audio channel configuration. For example, with just one stereo speaker system you can

hear full 5.1 channel audio.

RGB

This stands for red, green and blue. It means the video signal separated into its three primary

colour components ready to drive the picture tube almost directly. Two signalling connections are

needed to make the television accept the synchronisation and RGB signals. All this is in the

SCART connector. Not all televisions have RGB inputs.

SCART

An acronym (Syndicat des Constructeurs d'Appareils Radiorécepteurs et Téléviseurs) for a

connector used with many kinds of audio-visual equipment. It is also called Peritel and Euro-

connector.

About DVD

Handling Disc

•

Keep the disc clean and in good condition. Handle with care.

Do not put sticky paper or tape on it.

Do not expose a disc to direct sunlight or other forms of heating.

After using the disc, please replace it in its case.

Cleaning Disc

•

Before using the disc, please wipe it from its centre outwards, using a clean, soft cloth.

Do not use any type of solvent such as thinner, benzol (benzene), commercial cleaning

goods or antistatic spray.

Basic information about VCR and Videotape

Terms related with VCR

AFT

Automatic fine tuning, a circuit that automatically adjusts TV reception for optimum

reception/picture.

CABLE

Cable television.

Index Search A feature of this VCR that automatically records an index mark each time recording begins. It

helps you locate a particular segment of the tape quickly and easily.

Long Play, an intermediate tape recording speed that combines most of the picture/audio quality

obtainable at the standard recording speed with some of the tape economy of Extended Play (EP).

OSD

OTR

On-screen display of information pertinent to the features of the VCR.

One-touch recording, a feature that allows you to record the program you’re watching by

pressing the REC key. Each press of the key increases the recording time by 30 minutes, up to 10

hours.

Radio frequency, the composite audio/video signal supplied to a TV receiver (or other video

component) by an antenna or cable system.

Safety tab

The plastic tab at the back of a video tape cassette which, when removed, prevents accidental

erasure of a recording.

Standard play, the recording speed to use when the best picture quality is of prime importance

(and when total recording time is not).

Dew/ Condensation

•

If a VCR is moved from a cool place to a warm and damp place or to a place facing direct cool wind from say

an air-conditioner...the change in, temperature results in condensation occurring on the head drum of the

VCR.

If dew condensation occurs,

First, turn it on for one or two hours before using it.

Do not use it because it may cause problems to the VCR or videotape.

How to use a head cleaner

•

In the case of an old or contaminated videotape, playback picture may not be clear due to the contamination

of the VCR heads. Please remove contaminants using a head-cleaner. (See below!)

Insert a head-cleaner into VCR

Press “PLAY” for 5 seconds, and then press “FF” for about 10 seconds.

PLAY (5secs)

FF (10secs)

Eject the head-cleaner from VCR

• Should the playback picture still be poor or not viewable repeat the headcleaning process 2 or 3 times.

Otherwise contact your Authorised Service Agent

Trouble Shooting guide (VCR)

Symptom

Checks

•

“Power On” does not work.

✔

Please check whether the power plug is inserted in to the mains

socket .

Please check whether a videotape is inserted in.

Switch off and reinsert plug into mains socket.

It does not work even in “Power On”.

✔

•

A videotape is not recognised.

✔

Please check whether the power plug is inserted in to the mains socket.

Please check whether a videotape was inserted.

Please check whether a videotape is inserted the correct way up!

(The side of transparent window should be on the upside)

Have you tried to re-insert a videotape just after the tape was

ejected? Please try again after fully ejecting.

✔

•

On inserting a videotape, the tape is

re-ejected.

This is a safety mode to protect the videotape and is operated

automatically. Please pull out the tape and put it in again.

The videotape is not ejected.

If the product has not been used for a long time, the cassette may not

eject because the videotape has stretched. In this case, please pull out

the power plug for about 10mins and then press “EJECT” button.

✔

Please check your antenna’s interconnections.

TV channel should be tuned to the unit on a vacant programme

number video channel.

Please check your antenna’s signal it may be weak. If signal is weak

contact aerial specialist.

•

A picture on the video channel and a

playback image do not appear.

✔

Not receiving an off-air signal but

displays playback images.

Press “TV/VCR” and then ensure “VCR” is displayed on the display panel.

✔

Is VCR turned on?

Select TV by pressing [TV/VCR] button on remote control.

•

No picture on VCR channel.

✔

Whilst playing a videotape, there may be some noise experienced in

the beginning of the videotape or when resuming “PAUSE”. This

NOT a fault

Noise appears on screen after

playback of recording.

✔

Please press “TRACKING” for improved picture. Videotape may be

worn. Try to change it for another one.

•

While in play, noise appears.

Picture poor/noisy in play

Please use a head-cleaner to clean VCR heads. VCR heads may be

contaminated.

•

Sound and playback image are poor.

Sound presents but picture does not

appear.

•

Picture is irregular and stripes appear.

"Error" message is displayed on screen.

✔

Since VCR Play signals are not as stable as TV signals, the playback

image may appear unstable or distorted. To fix the problem, ensure

you are tuned in to the ‘VCR’ programme channel no. alternatively

connect via scart lead+select A/V or TV.

•

When playing back a recording, the

top of picture waves about.

If the videotape signal was recorded by another/incompatible

product or old faulty unit, horizontal noise bars may appear on the

screen.

•

Picture is not clear.

✔

Try to adjust the screen by [TRACKING+/-] button

Try to use a head-cleaner.

✔

Try to use a head-cleaner.

Try to adjust the screen by [TRACKING+/-] button.

If 2 head machine then this symptom is not a fault!

•

Picture on pause is unstable or slow

motion is not clear.

Trouble Shooting guide (VCR)

Symptom

Checks

•

Recording a TV program is

impossible.

✔

For recording, you should use videotape with a tab. Ensure tab is

NOT removed

Ensure there is no RF clash if so change RF output.

Please check whether the timer recording info is right.

Are RF cables input/antenna inputs connected correctly?

✔

After pressing “REC”, the videotape

is ejected automatically.

✔

Please check whether the clock is right.

Does the display on your video show “

recording)? Please check!

(Ready for timer

”

✔

Please check whether the timer recording info is right.

Please check that the record protect tab on the cassette is intact. (If the

tab is missing, cover the hole with a piece of scotch tape.)

•

Timer recording of Cable TV does

not work.

✔

Was a cable data output code connected correctly?

Did you turn off your player? (Please turn it on.)

In spite of pressing “CHANNEL”, a

channel can not be set.

✔

You may have not memorised channels.

Please check your channel setting or press a number button.

When duplicating/ copying, picture

is poor anddistorted.

✔

Some tapes or discs distributed in the rental market for hire are

duplicated.

•

remote control does not work.

✔

Battery may be weak or exhausted.

The receiver of remote control may be of an incompatible frequency to

sender frequency.

Buttons on remote control do not

work.

✔

During index search when videotape is positioned towards the

beginning, “VISS REW” and “REW” do not work.

If videotape is at the end, “FF”, “VISS FF”, “PLAY” and “REC” will

not work.

•

VISS index search does not work.

✔

Are you playing a tape that was not recorded on this machine? (Try

to re-record it using this recorder.)

You may start recording it in “REC-PAUSE”. Otherwise start

recording from stop condition.

Cable broadcasting can not be

selected.

✔

Please select “CABLE” programme number from the “CHANNEL

SETTING”.

Trouble Shooting guide (DVD)

Symptom

Checks

•

The recorder does not play.

✔

If a DVD is from overseas, it may not be played. Please check a

DVD’s region code whether it has the relative region code 2 or All.

✔

Please check whether a DVD is inserted in an upright direction (Label up)

If it is a CD-ROM for PC or DVD-ROM, it will not work.

No sound comes through.

✔

During play mode if “SLOW” or “PAUSE” selected. (There will be

no sound output.)

✔

Are all connections correct?

Please check the operative condition of TV or amplifier.

From SETUP, please check “AUDIO” menu.

•

A disc is playing but a picture does

not appear or a poor picture appears.

✔

Did you turn on your TV set?

Are all connections correct?

Play may be in “PAUSE” mode.

A disc may have some contaminants or be damaged.

A disc may be faulty.

•

Sound is irregular

✔

Please check the connection with Dolby Digital amplifier.

Please check the plugs are connected properly.

Check all contacts and connections.

REMOTE does not work.

✔

Please check the angle of operation of the remote control, the distance

and any obstacles that may be interrupting the signal.

Battery may be weak or exhausted.

✔

When you operate DVD, use it by pressing [DVD] button.

•

Dolby Digital sound does not work

✔

Dolby Digital sound can be reproduced via a Dolby Digital amplifier only.

Please check “Dolby Digital ” mark on your DVD.

If playing it through the digital output, while pressing “STOP”,

please check whether “Digital Output” is “Bitstream” by pressing

“SETUP” on menu.

✔

Please check that the connection is correct.

•

“AUDIO” or “SUBTITLE” button

does not work.

If a DVD does not include language information, these functions are

not supported.

“ANGLE” button does not work

while a DVD is playing.

✔

“ANGLE” is supported only by a DVD that contains multi angle scenes.

The “ANGLE” mark on screen will confirm that to the user this feature

is supported.

✔

Please check the angle of operation of the remote control, the distance

and any obstacles that may be interrupting the signal.

Please check that the battery in the remote control is not exhausted.

DVD may not contain menu information.

•

“MENU” does not appear while a

DVD is playing.

✔

The file name of MP3 only recognises the Alphabet (A~Z, a~z),

numbers (0~9) and a special symbols on keyboard (~, !, @, #, $ ....)

10 letters can be displayed at maximum.

•

The file name of MP3 (CD-R) appears

with strange letters.

✔

The letters above will be displayed as follows “----”.

If the surface of the disc is marked, the file display and playback will

not be possible.

•

Any MP3 (CD-R) file isn’t displayed.

Specifications

Supply Voltage

200-240V~, 50/60Hz

Power Consumption

Weight

HiFi :22W, Mono:20W

4.6kg

Dimension (W x H x D)

Operating temperature

Installation condition

Laser output

435mmx93mmx255mm (without foot), 435mmx98mmx255mm (with foot)

+5°C~40°C

Horizontal / Relative humidity under 80%

5mW (continuous wave max.)

635nm (DVD), 730nm (CD)

Wave length

Signal type

PAL COLOR

Antenna Input/output

VIDEO input

U/V-mixed: 75Ω unbalanced

1.0Vp-p (unbalanced, RCA JACK)

-8.8dBm, RCA JACK

AUDIO input

VIDEO output (common use of DVD and VCR)

VIDEO output (DVD only)

AUDIO output (common use of DVD and VCR)

AUDIO output (DVD only)

VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACK, SCART JACK

RGB output (75Ω In load R: 0.7Vp-p, G:0.7Vp-p, B:0.7Vp-p)

Audio output terminal (2 kinds): -5.8dBm (VCR), 2Vrms(DVD), RCA JACK

Analogue AUDIO output : 2.0Vrms

Digital audio output (OPTICAL, COAXIAL)

Very high density tapes with VHS marks

DVD, VIDEO-CD, CD (12cm), CD (8cm), MP3, CD-R, CD-RW

SP: 23.39mm/s, LP: 11.70mm/s

SP: 3hrs, LP: 6hrs (use of E180tape)

24 hrs

Playable tape

Playable disc

Tape speed

Playing time

Clock display

Time Recording

Power failure back-up period

VIDEO S/N (VCR)

8 programs a month

1min

Over 43dB(Standard recording)

Over 240 lines (Standard recording)

Over 400 lines (Playback DVD)

Over 65dB

Resolution

VCR

DVD

AUDIO (VCR)

AUDIO (DVD)

90dB

AUDIO dynamic range

DVD Audio output standards

Disc type

Output

DVD

VIDEO-CD

Analogue Audio output

Digital Audio output

48/96KHz sampling 44.1KHz sampling 44.1KHz sampling

48KHz sampling

44.1KHz sampling 44.1KHz sampling

Optical digital audio output

QUICK START GUIDE FOR SORTING CHANNELS ON THE DVD COMBO

Once the ‘Auto Set’ function has been completed the On Screen Display will show a list of the

channels which it has found, displayed in the order it found them.

It is unlikely, that they will be in the correct oder ie. BBC1 as PR01, BBC2 as PR02, ITV as PR03,

Channel4 as PR04 and Channel 5 as PR05.

Therefore, it will be necessary to Sort the channels displayed, into the correct order.

Please follow the following procedure.

STOP

PR01 P-01

Press the [VCR] button to select the VCR mode.

Press the [SETUP] button.

SETUP

TIMER PROGRAM

PR PRESET

Select the ‘PR PRESET’ using

button.

[

… †] buttons and press the [OK/ENTER]

VCR SETUP

TAPE CONTROL

PR+/-:SELECT

OK:CONFIRM

SETUP:END

Select the ‘PR ALIGN’ using

button.

[

…

†] buttons and press the [OK/ENTER]

PR PRESET

AUTO SET

MANUAL SET

PR ERASE

PR ALIGN

Select the channel that needs to be moved and press the [OK/ENTER]

button.

PR+/-:SELECT

OK:CONFIRM

SETUP:END

PR ALIGN

PR01 P-01 PR08 P-08

PR02 BBC2 PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 MTV PR12 ----

PR06 BBC1 PR13 ----

PR07 P-07 PR14 ----

Press the [OK/ENTER] button in order to select the ‘PR’ number which

you want to place the current selected channel using

[

… †] buttons.

ie. PR01 BBC1. And press the [OK/ENTER] button to confirm.

PR+/-:ALIGN

✔

:PR VIEW

OK:CONFIRM

SETUP:END

PR ALIGN

PR01 BBC1 PR08 P-08

PR02 P-01 PR09 P-09

PR03 BBC2 PR10 P-10

PR04 P-03 PR11 P-11

PR05 P-04 PR12 ----

PR06 MTV PR13 ----

PR07 P-07 PR14 ----

Repeat above 5-6 steps to align the other channels.

PR+/-:ALIGN

✔

:PR VIEW

OK:CONFIRM

SETUP:END

HP Hewlett Packard Hewlett Packard Computer Monitor X23LED User Manual
HP Hewlett Packard 510678 001 User Manual
FUNAI MJ427GG User Manual
Daewoo SH 3510P User Manual
Cypress Perform CY7C1380F User Manual
Compaq FS 740 User Manual
Blue Sea Systems BLUE SEAL EVOLUTION G518A B User Manual
Bertazzoni P24 CER NE User Manual
AOC Computer Monitor E941SERIES User Manual
Acer TravelMate 2400 User Manual