Compaq ProLiant DA 11411 User Manual

QuickSpecs  
Overview  
ProLiant BL20p and p-Class system  
What's New  
Performance dual processor server blade  
designed with enterprise availability  
ProLiant BL20p Server Blade includes:  
Intel Pentium III FC-PGA  
1.4 GHz processor (dual capability)  
ServerWorks HE- SuperLite Chipset  
512-MB or 1024-MB PC133-MHz  
Registered ECC SDRAM memory, (2 x 1  
Interleaved Memory), expandable to 4 GB  
Three NC3163 Fast Ethernet Embedded  
WOL (Wake On LAN) NICs standard  
Two NICs are upgradable to  
10/100/1000T using the Dual Gigabit  
Ethernet NC7780 NIC option kit  
One additional 10/100 port dedicated to  
Integrated Lights-Out (iLO) Management  
Smart Array 5i Controller with optional  
battery-backed write cache (integrated  
on system board)  
Wide Ultra3 SCSI Drive Cage standard  
supports up to two 1Wide Ultra3 hot  
plug hard drives  
Integrated Lights-Out (iLO) Advanced  
Management (ASIC on motherboard)  
Plugs vertically into 6U enclosure  
Up to 48 BL20p blades fit in 42U rack  
ProLiant BL p-Class Server Blade  
Enclosure:  
Server blades and interconnects blind  
mate into server blade enclosures for  
network connection and power  
Server blade enclosure is 6U and holds  
up to 8 ProLiant BL20p server blades  
and 2 interconnects  
2 types of interconnects available:  
interconnect switches or patch panels  
ProLiant BL p-Class Power Enclosure:  
Use BL p-Class sizing tool to determine  
power based on your configuration  
gurator/PowerCalc/BL20p.xls  
BL p-Class power enclosure provides  
shared, external, redundant power  
Power enclosure is 3U and holds up to 6  
hot-plug power supplies  
Choose single-phase or three-phase  
power  
BL p-Class power enclosure with power  
supplies not needed if using facility  
-48VDC ± 10% in this case purchase DC  
option kit  
ProLiant BL p-Class Power Distribution:  
Distributes power from the power  
enclosure to the server blade enclosures  
Three power distribution choices:  
BL p-Class scalable bus bar  
BL p-Class mini bus bar  
BL p-Class power bus box  
BL p-Class server blade, server blade  
enclosure, interconnects and power  
enclosure protected by a limited three year  
warranty with optional service uplifts available  
Note: Power requirements for a ProLiant BL  
p-Class system: 200V 240V AC,  
30 amp or facility DC -48V ± 10%.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
1
QuickSpecs  
ProLiant BL20p and p-Class system  
Standard Features (Server Blade)  
ProLiant BL20p Server Blade  
Intel Pentium III FC-PGA processor 1.40GHz  
Processor  
Upgradable to dual processing  
512-KB Level 2 Cache  
Upgradability  
Cache Memory  
Chipset  
ServerWorks HE- SuperLite Chipset  
Note: For more information regarding ServerWorks, please see the following URL:  
Standard  
512MB PC133-MHz Registered ECC SDRAM DIMM Memory (2 X 256 MB)  
(1 processor model)  
Memory  
Maximum  
Standard  
4096 MB  
1024MB PC133-MHz Registered ECC SDRAM DIMM Memory (2 x 512 MB)  
(2 processor model – not available in NA)  
Maximum  
4096 MB  
Note: Memory must be installed in pairs.  
Four NICs total:  
Network Controller  
Three Compaq NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On LAN), one with PXE support  
One 10/100 iLO NIC dedicated to management  
Two NICs are upgradable to 10/100/1000T using the Dual Gigabit Ethernet NC7780 NIC option kit  
Integrated Lights-Out (iLO) Management Advanced (ASIC on the System Board)  
Manageability  
Hard Drives  
None ship standard  
Internal Storage  
Maximum Internal Storage  
145.6 GB (internal drive cage) (2 x 72.8 GB Wide Ultra3, 1drives)  
No PCI slots all features are integrated  
Expansion Slots  
ProLiant BL p-Class Server Blade Enclosure and Interconnects  
6U (10.5-inch), 19-inch wide  
Holds up to 8 ProLiant BL20p servers blades  
ProLiant BL p-Class Server  
Blade Enclosure  
10 bays per server blade enclosure  
8 bays for server blades  
2 outside bays for interconnect modules (RJ-45 patch panels or GbE interconnect switches)  
Server blades blind mate into the server blade enclosure backplane for power and data connections  
Up to 6 BL p-Class 6U server blade enclosures fit in a 42U rack  
Server blade management module attached to the back of each BL p-Class 6U server blade enclosure to report  
events all servers and provide asset and inventory information  
Redundant 200V 240V AC, 30 amp single-phase for NA and International  
Redundant 208V 30amp 3-phase 4 wire, NA  
ProLiant BL p-Class Power  
Requirements  
Redundant 380 415V 20A 3-phase 5 wire, Intl  
Redundant -48VDC ± 10%  
DA-11411  
World Wide — Version 4 — September 19, 2002  
3
QuickSpecs  
ProLiant BL20p and p-Class system  
Standard Features (Server Blade Enclosure & Interconnects)  
Provides up to a 32 to 1 server networking cable reduction per server enclosure. Each interconnect switch (two  
ProLiant BL p-Class  
Interconnect Switch Option  
(Two switches per kit)  
(Every BL p-Class server blade enclosure  
requires two Interconnect switches OR two  
RJ-45 patch panels)  
per enclosure) reduces sixteen 10/100 Base-T/Base-TX server network ports to four uplinks ports (eight uplinks  
total). Only one to all eight uplinks may be used per enclosure.  
The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE interconnect switches and two DualTSX  
Interconnect Modules that provide four (4) LC 1000 SX and four (4) RJ-45 10/100 T/TX uplink ports per server  
enclosure.  
The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE interconnect switches and two QuadT  
Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and four (4) RJ-45 10/100 T/TX uplink ports  
per server enclosure.  
Also included (per Interconnect Switch):  
Two (2) RJ-45 10/100 T/TX front panel ports for management or additional uplinks  
One (1) RS-232 DB-9 front panel out-of-band management port  
Redundant 10/100 cross links ports connecting the two Interconnect Switches  
Redundant power and cooling inputs  
Hot-plug and hot- remove with configuration retention capability  
Power ON, management, and per port status and speed LED indicators  
Reset/power momentary push-button switch  
Compaq ProLiant BL Interconnect Switch Management Utilities and User Documentation CD  
Fully pre-configured for rapid deployment and immediate operation  
ProLiant BL Interconnect Switch Management System and Utilities:  
Full featured web-based interface, menu-driven console interface, Telnet, SNMP-based scripting utility and  
example scripts, SNMP and RMON MIBs, BootP and DHCP client, port mirroring, QoS packet prioritization, IGMP  
multicasting, and TFTP server utilities for management of interconnect switch  
6U (10.5-inch), Plugs into BL p-Class 6U server blade enclosures  
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections  
Supports Gigabit Ethernet network controllers  
ProLiant BL p-Class RJ-45  
patch panel  
(Two patch panels per kit)  
(Every BL p-Class server blade enclosure  
requires two Interconnect switches OR two  
RJ-45 patch panels)  
16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 patch panel (32 RJ-45 connections per server  
blade enclosure)  
10Base-T  
Categories 3, 4 or 5 UTP (100 meters)  
EIA/TIA-568 100-ohm STP (100 meters)  
Required Network Cabling  
100Base-TX Category 5 UTP (100 meters)  
EIA/TIA-568 100-ohm STP (100 meters)  
1000Base-T Category 5 UTP (100 meters)  
EIA/TIA-568 100-ohm STP (100 meters)  
1000Base-SX 50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)  
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)  
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)  
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)  
Note: For cabling information, refer to the Compaq Web site at: http://www.compaq.com/products/servers/.  
Note: This Web site is available in English only.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
4
QuickSpecs  
ProLiant BL20p and p-Class system  
Standard Features (Power System and Rack Information)  
Note: To determine power configuration please refer to the ProLiant BL p-Class Overview and Planning  
Whitepaper and sizing tool, please see the following URL:  
Compaq ProLiant BL p-Class  
Power System and Rack  
Information  
3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.74-meter deep), Dual input single phase and three  
phase models available  
ProLiant BL p-Class Power  
Enclosure  
BL p-Class power enclosure provides external, shared hot-plug power. Each three-phase power enclosure  
houses up to six hot-plug power supplies each single-phase power enclosures hold up to four hot-plug power  
supplies to power the BL p-Class server blades and interconnects  
Please use the sizing utility to determine the power needed for each configuration.  
Power enclosures and power supplies are not needed if using facility DC (-48V DC ± 10%). If using facility DC,  
only Facility DC Power Connection kit part number (240563-B21) is needed.  
In the ProLiant BL p-Class infrastructure, redundant -48 VDC power (from the power enclosures or facility DC  
power) is distributed from the power enclosures to the server blade enclosures through the Compaq bus bar  
system. Hinges attach the ProLiant BL bus bars to the rails in a rack. The bus bars swing open from the center to  
enable easy rear access to the server blades and network cables. Power is distributed redundantly through  
independent A- and B-sided bus bars.  
BL p-Class Power Distribution  
Three different power distribution solutions are available depending on the maximum number of server blade  
enclosures planned for the rack:  
Compaq ProLiant BL p-Class scalable bus bar  
Compaq ProLiant BL p-Class mini bus bar  
Note: To support a full 42U rack of BL20p server blades (6 server blade enclosures), two mini bus bars are  
needed.  
Compaq ProLiant BL p-Class power bus box  
Power Enclosures  
Supported  
Server Blade Enclosures  
Supported  
Max. Rack Space  
Occupied  
Scalable Bus Bar  
Mini Bus Bar  
1 or 2  
5  
3  
1
36U  
21U  
9U  
1
1
Power Bus Box  
Two 30amp redundant power feeds per power enclosure  
Connectors  
Required Power Source  
–NEMA receptacles (NA/Japan)  
NA 1-phase  
L6-30, 250v, 30A 3-wire  
L15-30, 250V, 30A, 4-wire  
NA 3-phase  
–IEC 309 Pin & Sleeve connectors (International)  
Intl 1-phase  
Intl 3-phase  
250V, 32A, 3- pin (2 pole + ground)  
380-415V, 32A, 5--pin (4 pole + ground)  
Optimized for power cabling from bottom and network cabling from top  
For cabling information, refer to the Compaq Web site at  
Note: This Web site is available in English only.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
5
QuickSpecs  
ProLiant BL20p and p-Class system  
Standard Features  
Optional ProLiant Essentials Value Optional software offerings that selectively extend the functionality of an  
ProLiant Essentials Foundation  
Pack Software  
Packs  
Adaptive Infrastructure to address specific business problems and needs:  
Rapid Deployment Pack – an automated solution for multi-server  
deployment and provisioning, enabling companies to quickly and easily  
adapt to changing business demands.  
Workload Management Pack – provides easier management of  
complex environments, improving overall server utilization and enabling  
Windows 2000 customers for the first time to confidently deploy multiple  
applications on a single multiprocessor ProLiant Server.  
Integrated Lights-Out Advanced Pack - The BL20p includes the  
advance version of the Integrated Lights-Out which includes graphical  
console and virtual media.  
Insight Manager™ 7  
Insight Manager 7 helps maximize system uptime and performance and  
reduces the cost of maintaining the IT infrastructure by providing proactive  
notification of problems before those problems result in costly downtime and  
reduced productivity. Insight Manager 7 is easy to set up and provides rapid  
access to detailed fault and performance information gathered by the  
Management Agents. One-click-access to the Remote Insight Lights Out  
Edition board allows systems administrators to take full graphical control of  
ProLiant servers in remote locations or lights-out data centers. Finally,  
Insight Manager 7 in concert with the Version Control Agents and Version  
Control Repository Manager enables systems administrators to version  
manage and update system software across groups of Compaq ProLiant  
servers.  
Management Agents  
The Management Agents  
the foundation for Compaq's Intelligent Manageability strategy. They provide  
direct, browser-based access to in-depth instrumentation built into ProLiant  
servers, workstations, desktops, and portables, and send alerts to Insight  
Manager 7 and other management consoles in case of subsystem or  
environmental failures. For additional information about the Management  
Agents and other management product from Compaq, please visit the  
management website at http://www.compaq.com/manage.  
Note: This Web site is available in English only.  
Compaq ActiveUpdate  
ActiveUpdate is a web-based application that keep IT managers directly  
connected to Compaq for proactive notification and delivery of the latest  
software updates.  
Compaq ROMPaq, support  
The latest software, drivers, and firmware fully optimized and tested for your  
software, and configuration utilities ProLiant server and options.  
Compaq Survey Utility and  
diagnostics utilities  
The most advanced configuration analysis, reporting and troubleshooting  
utilities used by Compaq and at your fingertips.  
Compaq Health Driver  
Health Drivers interface with the Integrated Lights-Out ASIC to provide  
system management support, including monitoring of server components,  
event logging and support for the Compaq Insight Management Agents.  
Compaq iLO Management Interface The iLO Management Interface Driver provides access to the iLO  
Driver  
management processor for Insight Management Agents. This interface is  
used to provide SNMP alert forwarding and management agent integration.  
Note: For more information regarding ProLiant Essentials Software, please  
Note: This Web site is available in English only.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
6
QuickSpecs  
Standard Features  
OS Support  
ProLiant BL20p and p-Class system  
Microsoft Windows 2000 Advanced Server  
LINUX (Red Hat and SuSE )  
Microsoft .NETServer  
Note: For a more complete and up-to-date listing of supported OS’s and versions, please visit our OS Support  
Note: For an up-to-date listing of the latest drivers available for the Compaq ProLiant BL p-Class, please see:  
Integrated Lights-Out Advanced (iLO)  
Intelligent Manageability  
Virtual Text and Graphical Remote Console *  
Virtual Floppy *  
Virtual Power Button Control  
Dedicated LAN Connectivity  
Automatic IP Configuration via DHCP/DNS/WINS  
Industry Standard 128-bit Secure Sockets Layer (SSL) Security  
IML and iLO Event Logging  
Support for 12 user accounts with customizable access privileges  
Automatic Server Recovery-2 (ASR-2)  
Compaq Insight Manager 7  
Redundant ROM  
Remote Flash ROM  
ROM Based Setup Utility (RBSU)  
Advanced Configuration and Power Interface Specification Ready (ACPI)  
Server Health Logs  
Compaq Redundant Power Supply Utility  
Pre-Failure Warranty (covers processors, as well as hard drives and memory)  
Compaq Interconnect Switch Management System and Utilities (interconnect switch option)  
Integrated Management Log (IML)  
Off-Line Backup Processor capability  
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)  
Redundant/adaptive load balancing NIC Support  
* Advanced features such as Graphical Remote Console and Virtual Floppy are included with the BL p-Class  
server.  
Power redundancy: Redundant AC feeds into power enclosures, redundant DC feeds from power enclosure to  
server blade enclosures, 1 + 1 redundant power supplies  
Availability  
Two hot-plug SCSI hard drive bays and integrated RAID (Smart Array 5i) on every server blade (Battery-backed  
write cache is optional.)  
Redundant ROM on each server blade  
ECC Memory  
Interconnects Switch Availability  
Hot-plug and hot- remove with configuration retention capability  
Two network connections per server blade bay (four NICs total) routed to two redundant interconnect  
switches  
Redundant inter-switch communication with two sets of redundant uplink ports per each interconnect  
switch  
IEEE 802.1D Spanning tree protocol support for loop-free path redundancy  
Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing  
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)  
DA-11411  
World Wide — Version 4 — September 19, 2002  
7
QuickSpecs  
Standard Features  
Security  
ProLiant BL20p and p-Class system  
Power-on password  
Administrator's password  
Integrated Lights-Out has 12 customizable user accounts and SSL encryption  
Integrated Lights-Out can be disabled via a Global Setting  
Interconnect Switch multilevel user names and passwords and management interface time out period setting  
Up to 64 Port-based IEEE 802.1Q tagged VLANs per interconnect switch  
Mounts in Compaq, and Telco racks and Third Party racks that meet the following criteria:  
Minimum Rack Requirements  
Compatible with 19-inch Standard EIA rail sets  
EIA rail-to-rail depth is 29 30″  
Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear  
RETMA rail to rear door, inclusive in the 36-inch overall depth)  
Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration  
with patch panel)  
Must be capable of supporting 1600 lb (for full rack configuration)  
Perforated front and rear doors to accommodate front-to-back cooling  
Must have 65% open perforation on server blade enclosure doors to support airflow requirements  
Optimized for use with the Compaq 10000 Series racks  
Note: If using Compaq 7000 Series rack, Compaq Rack Extension Kit and High Air Flow Rack Door options are  
required.  
Rack 9000 and 10000 series Cabinets  
Rack Airflow Requirements  
The increasing power of new high-performance processor technology requires increased cooling  
efficiency for rack-mounted servers. The Compaq 9000 Series Rack and the new 10000 Series Racks  
provides enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers  
using the latest processors.  
Rack 7000 series Cabinets  
When installing a server with processors running at speeds of 550 MHz or greater in Compaq Rack  
7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the new processor  
technology requires the installation of Compaq’s new High Airflow Rack Door Inserts (327281-B21  
(42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote enhanced airflow for maximum  
cooling.  
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow  
and to prevent damage to the equipment:  
o
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must  
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit  
adequate airflow (equivalent to the required 64 percent open area for ventilation).  
o
Side: The clearance between the installed rack component and the side panels of the rack must  
be a minimum of 2.75 inches (7 cm).  
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This  
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling  
that can lead to thermal damage.  
Note: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with  
the server, or to the server documentation located in the Support section at the following URL:  
DA-11411  
World Wide — Version 4 — September 19, 2002  
8
QuickSpecs  
Standard Features  
Service and Support  
ProLiant BL20p and p-Class system  
Compaq Services provides a three-year, limited warranty, including Pre-Failure Warranty (coverage of hard drives,  
memory and processors) fully supported by a worldwide network of resellers and service providers. Compaq  
technical assistance is available 7x24, toll free in the United States and Canada. Telephone support services may  
be covered under warranty or available for an additional fee.  
Note: Sever Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.  
Note: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year  
on-site support.  
A full range of CarePaqpackaged hardware and software services:  
Installation and start up  
Extended coverage hours and enhanced response times  
System management and performance services  
Availability and recovery services  
Note: For more information, customer/resellers can contact  
Please see the following URL regarding Warranty Information For Your Compaq Products:  
For additional information regarding Worldwide Limited Warranty and Technical Support, please see the following  
Note: These Web sites are available in English only.  
Note: Certain restrictions and exclusions apply. Consult the Compaq Customer Support Center at 1-800-345-1518  
for details.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
9
QuickSpecs  
ProLiant BL20p and p-Class system  
Models  
Processor(s)  
Cache Memory  
Memory  
(1) Intel Pentium III 1.40 GHz standard (up to 2 supported)  
512-KB Level 2 writeback per processor  
ProLiant BL20p P1400-512KB,  
512MB (1P)  
230040-B21  
512 MB (Standard) (2 X 256MB) to 4096 MB PC133-MHz Registered ECC  
SDRAM DIMM Memory  
Three Compaq NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On  
LAN); one NIC has PXE support  
One additional 10/100 port dedicated to iLO Management  
Network Controller  
Smart Array 5i Controller (integrated on system board)  
None ship standard  
Storage Controller  
Hard Drives  
Up to 145.6-GB maximum (with optional hard drives)  
None  
Internal Storage  
Optical Drive  
Plugs vertically into Compaq ProLiant BL p-Class Server Blade Enclosure  
Form Factor  
Processor(s)  
Cache Memory  
Memory  
(2) Intel Pentium III 1.40 GHz standard (up to 2 supported)  
512-KB Level 2 writeback per processor  
ProLiant BL20p P1400-512KB,  
1GB (2P)  
257959-B21  
1024 MB (Standard) (2 X 512MB) to 4096 MB PC133-MHz Registered ECC  
SDRAM DIMM Memory  
Three Compaq NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On  
LAN); one NIC has PXE support  
One additional 10/100 port dedicated to iLO Management  
*Not available in North America.  
Network Controller  
Smart Array 5i Controller (integrated on system board)  
None ship standard  
Storage Controller  
Hard Drives  
Up to 145.6-GB maximum (with optional hard drives)  
None  
Internal Storage  
Optical Drive  
Plugs vertically into Compaq ProLiant BL p-Class Server Blade Enclosure  
Form Factor  
DA-11411  
World Wide — Version 4 — September 19, 2002  
10  
QuickSpecs  
ProLiant BL20p and p-Class system  
Options  
230255-B21  
ProLiant BL20p Unique Options Dual NC7780 Gigabit Upgrade Module for ProLiant BL20p  
Note: The Dual NC7780 Gigabit Upgrade Module replaces two of the standard NC3163  
Fast Ethernet Embedded WOL (Wake On LAN) NICs to two 10/10/1000T  
NC7780 NICs.  
Note: The GbE Interconnect Switch options support server NIC speeds to 100 Mbps. It  
is recommended that the patch panel be used with the Dual NC7780 Gigabit  
Upgrade Module if server NIC speeds to 1000 Mbps are required.  
243564-B21  
ProLiant BL p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment  
Pack Trial)  
ProLiant BL p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment  
Pack Licenses)  
281404-B21  
230766-B21  
ProLiant BL p-Class RJ-45 Patch panel (pair)  
Note: Only one interconnect kit required per server blade enclosure.  
ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches  
and two QuadT Interconnect Modules)  
Note: Only one interconnect kit required per server blade enclosure.  
ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches  
and two DualTSX Interconnect Modules)  
249655-B21  
279720-B21  
239162-001  
Note: Only one interconnect kit required per server blade enclosure.  
Single Phase Redundant Power Enclosure with 4 power supplies (NA/JPN)  
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to  
order additional power supplies with this option kit)  
239162-421  
230769-001  
230769-421  
Single Phase Redundant Power Enclosure with 4 power supplies (Int'l)  
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to  
order additional power supplies with this option kit)  
3 Phase Redundant Power Enclosure with 6 power supplies (NA/JPN)  
(3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order  
additional power supplies with this option kit)  
3 Phase Redundant Power Enclosure with 6 power supplies (Int'l)  
(3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order  
additional power supplies with this option kit)  
231710-001  
231710-421  
231709-001  
231709-421  
Single Phase Power Enclosure (empty) (NA/JPN)  
(Holds up to 4 power supplies; power supplies are not included in this kit)  
Single Phase Power Enclosure (empty) (Int'l)  
(Holds up to 4 power supplies; power supplies are not included in this kit)  
3 Phase Power Enclosure (empty) (NA/JPN)  
(Holds up to 6 power supplies; power supplies are not included in this kit)  
3 Phase Power Enclosure (empty) (Int'l)  
(Holds up to 6 power supplies; power supplies are not included in this kit)  
Single Power Supply  
239161-B21  
240563-B21  
240560-B21  
Facility DC Power Connection  
ProLiant p-Class Scalable Bus Bar  
240559-B21  
240562-B21  
ProLiant p-Class Mini Bus Bar  
ProLiant p-Class Bus Power Box  
DA-11411  
World Wide — Version 4 — September 19, 2002  
11  
QuickSpecs  
ProLiant BL20p and p-Class system  
Options  
ProLiant Essentials Value Pack  
Software  
Rapid Deployment Pack, 10 User, V1.x  
Note: This license allows 10 servers to be managed and deployed via the Deployment  
Server.  
269817-B21  
Note: Not necessary if you purchase the server blade enclosure with 8 Rapid  
Deployment Pack licenses 281404-B21.  
Rapid Deployment Pack, 10 User, V1.x (Japan)  
Note: This license allows 10 servers to be managed and deployed via the Deployment  
Server.  
Note: Not necessary if you purchase the server blade enclosure with 8 Rapid  
Deployment Pack licenses 281404-B21.  
Rapid Deployment Pack, 1 User, V1.x  
Note: This license allows 1 server to be managed and deployed via the Deployment  
Server.  
Note: Not necessary if you purchase the server blade enclosure with 8 Rapid  
Deployment Pack licenses 281404-B21.  
Rapid Deployment Pack, 1 User, V1.x (Japan)  
Note: This license allows 1 server to be managed and deployed via the Deployment  
Server.  
269817-291  
267196-B21  
267196-291  
303284-B21  
Note: Not necessary if you purchase the server blade enclosure with 8 Rapid  
Deployment Pack licenses 281404-B21.  
ProLiant Essentials Workload Management Pack (Featuring Resource Partitioning  
Manager version 2.0)  
Note: For more information regarding ProLiant Essentials Software, please see the following URL:  
Note: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to URL  
http://www.compaq.com/proliantessentials or the various ProLiant Essentials Value Pack product  
QuickSpecs for more information.  
Note: These Web sites are available in English only.  
Processor  
Pentium lll P1400-512KB Processor Option Kit  
234277-B21  
201695-B21  
201694-B21  
201693-B21  
201692-B21  
Memory (SDRAM DIMMs)  
2048 MB PC133MHz Registered ECC SDRAM Memory Kit (2x1024 MB)  
1024 MB PC133MHz Registered ECC SDRAM Memory Kit (2x512 MB)  
512 MB PC133MHz Registered ECC SDRAM Memory Kit (2x256 MB)  
256 MB PC133MHz Registered ECC SDRAM Memory Kit (2x128 MB)  
Wide Ultra3 SCSI – Universal Hot Plug  
Hard Drives  
72.8-GB Wide Ultra3 SCSI 10,000 rpm Drive (1)  
36.4-GB Wide Ultra3 SCSI 10,000 rpm Drive (1)  
18.2-GB Wide Ultra3 SCSI 10,000 rpm Drive (1)  
36.4-GB Wide Ultra3 SCSI 15,000 rpm Drive (1)  
18.2-GB Wide Ultra3 SCSI 15,000 rpm Drive (1)  
232432-B22  
176496-B22  
142673-B22  
232916-B22  
188122-B22  
Storage Controllers  
Communications  
Battery Backed Write Cache Enabler Option Kit  
255514-B21  
255514-291  
Battery Backed Write Cache Enabler Option Kit (Japan)  
Dual NC7780 Gigabit Upgrade Module for ProLiant BL20p  
230255-B21  
Note: The Dual NC7780 Gigabit Upgrade Module replaces two of the standard NC3163  
Fast Ethernet Embedded WOL (Wake On LAN) NICs to two 10/10/1000T  
NC7780 NICs.  
Note: The GbE Interconnect Switch options support server NIC speeds to 100 Mbps. It  
is recommended that the patch panel be used with the Dual NC7780 Gigabit  
Upgrade Module if server NIC speeds to 1000 Mbps are required.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
12  
QuickSpecs  
ProLiant BL20p and p-Class system  
Options  
243564-B21  
281404-B21  
BL p-Class Server Blade  
Enclosures  
ProLiant BL p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment  
Pack Trial)  
ProLiant BL p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment  
Pack Licenses)  
230766-B21  
249655-B21  
BL p-Class Interconnects  
ProLiant BL p-Class RJ-45 Patch panel (pair)  
Note: Only one interconnect kit required per server blade enclosure.  
ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches  
and two QuadT Interconnect Modules)  
Note: Only one interconnect kit required per server blade enclosure.  
ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches  
and two DualTSX Interconnect Modules)  
279720-B21  
Note: Only one interconnect kit required per server blade enclosure.  
BL p-Class Power options  
Note: Use p-Class sizing tool to help determine power configuration:  
Single Phase Redundant Power Enclosure with 4 power supplies (NA/JPN)  
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to  
order additional power supplies with this option kit)  
239162-001  
239162-421  
230769-001  
230769-421  
Single Phase Redundant Power Enclosure with 4 power supplies (Int'l)  
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to  
order additional power supplies with this option kit)  
3 Phase Redundant Power Enclosure with 6 power supplies (NA/JPN)  
(3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order  
additional power supplies with this option kit)  
3 Phase Redundant Power Enclosure with 6 power supplies (Int'l)  
(3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order  
additional power supplies with this option kit)  
Single Phase Power Enclosure (empty) (NA/JPN)  
(Holds up to 4 power supplies; power supplies are not included in this kit)  
Single Phase Power Enclosure (empty) (Int'l)  
(Holds up to 4 power supplies; power supplies are not included in this kit)  
3 Phase Power Enclosure (empty) (NA/JPN)  
(Holds up to 6 power supplies; power supplies are not included in this kit)  
3 Phase Power Enclosure (empty) (Int'l)  
231710-001  
231710-421  
231709-001  
231709-421  
(Holds up to 6 power supplies; power supplies are not included in this kit)  
Single Power Supply  
Facility DC Power Connection  
239161-B21  
240563-B21  
240560-B21  
Power Distribution  
Diagnostic Options  
ProLiant p-Class Scalable Bus Bar  
ProLiant p-Class Mini Bus Bar  
ProLiant p-Class Bus Power Box  
240559-B21  
240562-B21  
230743-B21  
ProLiant p-Class Diagnostic Station  
Note: The Diagnostic Station allows access to the ProLiant BL20p server blade and the  
BL p-Class interconnect switch outside of the server enclosure. The option  
provides power and a data interface so that "offline" upgrade and diagnostic  
functions may be performed.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
13  
QuickSpecs  
ProLiant BL20p and p-Class system  
Options  
Compaq Rack 10000 Series  
(Graphite Metallic)  
Compaq Rack 10842 (42U) – Pallet  
257415-B21  
257415-B22  
Compaq Rack 10842 (42U) – Shock Pallet  
Note: Not available in North America.  
Compaq Rack 10647 (47U) – Pallet  
Compaq Rack 10647 (47U) – Crated  
Compaq Rack 10642 (42U) – Pallet  
Compaq Rack 10642 (42U) – Shock Pallet  
Compaq Rack 10642 (42U) – Crated  
Compaq Rack 10636 (36U) – Pallet  
Compaq Rack 10636 (36U) – Shock Pallet  
Compaq Rack 10636 (36U) – Crate  
Compaq Rack 10622 (22U) – Pallet  
Compaq Rack 10622 (22U) – Shock Pallet  
Compaq Rack 10622 (22U) – Crated  
245160-B21  
245160-B23  
245161-B21  
245161-B22  
245161-B23  
245162-B21  
245162-B22  
245162-B23  
245163-B21  
245163-B22  
245163-B23  
Note: -B21 (pallet) used to ship empty racks shipped on a truck  
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels)  
-B23 (crated) used for air shipments of empty racks  
Compaq Rack 9000 Series (Opal) Compaq Rack 9142 (42U) – Pallet  
Compaq Rack 9142 (42U) – Shock Pallet  
Compaq Rack 9142 (42U) – Crated  
120663-B21  
120663-B22  
120663-B23  
120664-B21  
120664-B22  
120664-B23  
120665-B21  
120665-B22  
120665-B23  
222192-B21  
Compaq Rack 9136 (36U) – Pallet  
Compaq Rack 9136 (36U) – Shock Pallet  
Compaq Rack 9136 (36U) – Crated  
Compaq Rack 9122 (22U) – Pallet  
Compaq Rack 9122 (22U) – Shock Pallet  
Compaq Rack 9122 (22U) – Crated  
Compaq Rack 9842 (800mm wide, 42U) - Pallet  
Note: -B21 (pallet) used to ship empty racks shipped on a truck  
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels)  
-B23 (crated) used for air shipments of empty racks  
Rack Options for Compaq Rack  
10000 Series  
Rack Blanking Panels – Graphite (Multi)  
Note: Contains one each of 1U, 2U, 3U and 4U panel.  
Rack Blanking Panels – Graphite (1U)  
Note: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (1U).  
253214-B26  
253214-B21  
253214-B22  
253214-B23  
253214-B24  
Rack Blanking Panels – Graphite (2U)  
Note: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (2U).  
Rack Blanking Panels – Graphite (3U)  
Note: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (3U).  
Rack Blanking Panels – Graphite (4U)  
Note: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (4U).  
Rack Blanking Panels – Graphite (5U)  
Note: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (5U).  
800mm Stabilizer Option Kit (Graphite)  
253214-B25  
255488-B21  
Note: The 800mm Stabilizer Kit (PN 255488-B21) supports the Rack 9842 only.  
600mm Stabilizer Kit – Graphite  
246107-B21  
248929-B21  
246099-B21  
257413-B21  
Baying Kit for Rack 10000 series (Carbon)  
42U Side Panel – Graphite Metallic  
110V Fan Kit (Graphite)  
Note: Roof Mount Includes power cord with IEC320-C13 to NEMA 5-15P.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
14  
QuickSpecs  
ProLiant BL20p and p-Class system  
Options  
Rack Options for Compaq Rack  
10000 Series (continued)  
220V Fan Kit (Graphite)  
Note: Roof Mount Includes power cord with IEC320-C13 to NEMA 6-15P.  
257414-B21  
36U Side Panel – Graphite Metallic  
47U Side Panel – Graphite Metallic  
9000/10000 Series Offset Baying Kit  
246102-B21  
255486-B21  
248931-B21  
Note: This kit can be used to connect 9000 and 10000 series racks in 42U height  
together. Kit contents include hardware for connecting racks and a panel to cover  
the 100mm gap at the rear of the two racks.  
Rack Options for Compaq Rack  
9000 Series  
Baying/Coupling Kit  
120669-B21  
120670-B21  
42U Side Panel  
Note: The 42U Side Panel (PN 120670-B21) supports the Compaq Rack 9142 and  
Compaq Rack 9842.  
36U Side Panel  
120671-B21  
Note: The 36U Side Panel (PN 120671-B21) supports the Compaq Rack 9136.  
600mm Stabilizer Option Kit  
800mm Stabilizer Option Kit (Opal)  
120673-B21  
234493-B21  
Note: The 800mm Stabilizer Kit (PN 234493-B21) supports the Rack 9842 only  
Grounding Rack Option Kit  
Stabilizer Option Kit  
120682-B21  
120673-B21  
169940-B21  
Rack Blanking Panel (Multi)  
Note: Kit includes four panels in 1U, 2U, 4U, and 8U.  
9142 Extension Kit  
120679-B21  
189453-B21  
189453-B22  
189453-B23  
189453-B24  
189453-B25  
Note: The 9142 Extension Kit (PN 120679-B21) supports the Compaq Rack 9142 only.  
Rack Blanking Panels (1U)  
Note: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (1U).  
Rack Blanking Panels (2U)  
Note: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (2U).  
Rack Blanking Panels (3U)  
Note: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (3U).  
Rack Blanking Panels (4U)  
Note: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (4U).  
Rack Blanking Panels (5U)  
Note: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (5U)  
9136 Extension Kit  
218216-B21  
218217-B21  
9142 Short Rear Door  
Note: The 9142 Short Rear Door (PN 218217-B21) supports the Compaq Rack 9142  
only.  
Split Rear Door (Opal)  
254045-B21  
Note: The Split Rear Door (PN 254045-B21) supports the 600 mm wide, 42U 9000  
series rack.  
9136 Short Rear Door  
218218-B21  
9142 Split Rear Door  
9000/10000 Series Offset Baying Kit  
254045-B21  
248931-B21  
Note: This kit can be used to connect 9000 and 10000 series racks in 42U height  
together. Kit contents include hardware for connecting racks and a panel to cover  
the 100mm gap at the rear of the two racks.  
Rack Options for Compaq Rack  
7000 Series and Telco racks  
High Air Flow Rack Door Insert for 7122  
157847-B21  
327281-B21  
327281-B22  
292407-B21  
292406-B21  
154392-B21  
High Air Flow Rack Door Insert for 7142 (single)  
High Air Flow Rack Door Insert for 7142 (6-pack)  
Compaq Networking Cable Management Kit  
Compaq Networking Recessed Rail Management Kit  
Compaq Rack Extension Kit for 7142  
DA-11411  
World Wide — Version 4 — September 19, 2002  
15  
QuickSpecs  
ProLiant BL20p and p-Class system  
Options  
Rack Options for Compaq Rack  
10000, 9000 and 7000 Series  
Monitor Utility Shelf  
303606-B21  
Ballast Option Kit  
120672-B21  
234672-B21  
100kg Sliding Shelf  
Rack Rail Adapter Kit (25depth)  
Monitor/Utility Shelf - Graphite  
Depth Adjustable Fixed Rail  
Cable Management D-Rings Kit  
Console Management Controller (CMC) Option Kit  
120675-B21  
253449-B21  
332558-B21  
168233-B21  
203039-B21  
Console Management Controller (CMC) Sensors Option Kit  
Console Management Controller (CMC) Locking Option Kit  
Console Management Controller (CMC) Smoke Sensor Option Kit  
203039-B22  
203039-B23  
203039-B24  
Rack Options for Telco Racks  
Bus Bar Telco Rail Option Kit  
Enclosure Telco Rail Option Kit  
245249-B21  
266076-B21  
Service and Support Offerings  
(CarePaq Services)  
Hardware Services 4-Hour On-site Service  
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. (6-3 part number  
for US)  
274369-002  
207266-022  
274370-002  
207267-022  
207268-022  
207269-022  
302329-001  
207266-021  
302330-001  
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. (6-3 part number  
for EMEA)  
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. (6-3 part number  
for US)  
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. (6-3 part number  
for EMEA)  
3 yrs, 9x5, on-site hardware maintenance with a 6-hour repair time for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. (6-3 part number  
for EMEA)  
3 yrs, 24x7, on-site hardware maintenance with a 6-hour repair time for a fully  
configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8  
server blades, power enclosure with power supplies and power distribution. (6-3 part  
number for EMEA)  
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. Electronic  
CarePaq service. (6-3 part number for US)  
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. Electronic  
CarePaq service. (6-3 part number for EMEA)  
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. Electronic  
CarePaq service. (6-3 part number for US)  
DA-11411  
World Wide — Version 4 — September 19, 2002  
16  
QuickSpecs  
ProLiant BL20p and p-Class system  
Options  
Service and Support Offerings  
(CarePaq Services) (continued)  
Hardware Services 4-Hour On-site Service (continued)  
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. Electronic  
CarePaq service. (6-3 part number for EMEA)  
207267-021  
207268-021  
207269-021  
3 yrs, 9x5, on-site hardware maintenance with a 6-hour repair time for a fully configured  
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server  
blades, power enclosure with power supplies and power distribution. Electronic  
CarePaq service. (6-3 part number for EMEA)  
3 yrs, 24x7, on-site hardware maintenance with a 6-hour repair time for a fully  
configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8  
server blades, power enclosure with power supplies and power distribution. Electronic  
CarePaq service. (6-3 part number for EMEA)  
Installation & Start-up Services  
Install ProLiant BL p-Class server blade enclosure including up to 8 ProLiant BL p-Class  
server blades and interconnects, power enclosure with power supplies and power  
distribution. (6-3 part number for US)  
Install ProLiant BL p-Class server blade enclosure including up to 8 ProLiant BL p-Class  
server blades and interconnects, power enclosure with power supplies and power  
distribution. Electronic CarePaq service. (6-3 part number for US)  
274371-002  
302331-001  
274545-002  
Provides for the Installation and Start-up of Rapid Deployment Pack on a Customer  
supplied server designated as a Deployment Server. Includes the deployment of a  
single server. This new server will be deployed using either one of the pre-configured  
scripts or an image. In addition, the service will provide for the capture and storage of  
the configuration of the newly deployed server and orientation on product usage. To be  
delivered during standard office ours, standard office days. (6-3 part number for US)  
Provides for the Installation and Start-up of Rapid Deployment Pack on a Customer  
supplied server designated as a Deployment Server. Includes the deployment of a  
single server. This new server will be deployed using either one of the pre-configured  
scripts or an image. In addition, the service will provide for the capture and storage of  
the configuration of the newly deployed server and orientation on product usage. To be  
delivered during standard office ours, standard office days. (6-3 part number for  
EMEA)  
204601-022  
204601-021  
Provides for the Installation and Start-up of Rapid Deployment Pack on a Customer  
supplied server designated as a Deployment Server. Includes the deployment of a  
single server. This new server will be deployed using either one of the pre-configured  
scripts or an image. In addition, the service will provide for the capture and storage of  
the configuration of the newly deployed server and orientation on product usage. To be  
delivered during standard office ours, standard office days. Electronic CarePaq service.  
(6-3 part number for EMEA)  
Note: For more information, customer/resellers can contact http://www.compaq.com/services.  
Note: This Web site is available in English only.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
17  
QuickSpecs  
Memory  
ProLiant BL20p and p-Class system  
ProLiant BL20p Server Blade (2P Model) (not available in NA)  
STANDARD MEMORY  
1024-MB PC133 MHz Registered ECC SDRAM DIMM installed (2 x 512-MB SDRAM DIMM)  
STANDARD MEMORY PLUS OPTIONAL MEMORY  
Up to 3072-MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits.  
STANDARD MEMORY REPLACED WITH OPTIONAL MEMORY  
Up to 4096-MB of SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DIMM memory expansion  
kits.  
Memory  
Standard  
Optional  
Maximum  
Slot  
1
2
3
4
1024 MB  
3072 MB  
4096 MB  
512 MB  
512 MB  
1024 MB  
512 MB  
512 MB  
1024 MB  
Empty  
Empty  
1024 MB  
1024 MB  
1024 MB  
1024 MB  
Following are memory options available from Compaq:  
201695-B21  
201694-B21  
201693-B21  
201692-B21  
2048-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 1024 MB)  
1024-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 512 MB)  
512-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 256 MB)  
256-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 128 MB)  
ProLiant BL20p Server Blade (1P Model)  
STANDARD MEMORY  
512-MB PC133 MHz Registered ECC SDRAM DIMM installed (2 x 256-MB SDRAM DIMM)  
STANDARD MEMORY PLUS OPTIONAL MEMORY  
Up to 2560-MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits.  
STANDARD MEMORY REPLACED WITH OPTIONAL MEMORY  
Up to 4096-MB of SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DIMM memory expansion  
kits.  
Memory  
Standard  
Optional  
Maximum  
Slot  
1
2
3
4
512 MB  
2560 MB  
4096 MB  
256 MB  
256 MB  
1024 MB  
256 MB  
256 MB  
1024 MB  
Empty  
Empty  
1024 MB  
1024 MB  
1024 MB  
1024 MB  
Following are memory options available from Compaq:  
201695-B21  
201694-B21  
201693-B21  
201692-B21  
2048-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 1024 MB)  
1024-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 512 MB)  
512-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 256 MB)  
256-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 128 MB)  
DA-11411  
World Wide — Version 4 — September 19, 2002  
18  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
Dimensions  
Height  
Width  
Depth  
10.5 in /26.67 cm  
17.60 in/44.70 cm  
28.86 in/73.30 cm  
Compaq ProLiant BL p-Class  
Server Blade Enclosure  
Input Specifications  
Rated input voltage  
Rated input current  
Rated input Power  
-43 VDC to -53 VDC Nominal -48 VDC  
62.5 A at -48 VDC  
3000 W  
Individual server blade bay Rated input voltage  
-43 VDC to -53 VDC Nominal -48 VDC  
6.25 A at -48 VDC  
ratings  
Rated input current  
Rated input Power  
300 W  
Temperature range  
Operating  
50° to 95° F/10° to 35° C  
-22° to 140° F/-30° to 60° C  
20% to 80%  
Non-Operating  
Operating  
Relative humidity  
(non-condensing)  
Non-Operating  
Operating  
5% to 95%  
Wet bulb temperature  
82.4° F/28° C  
Non-Operating  
101.7° F/38.7° C  
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight.  
Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144  
m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of  
113° F/45° C. Altitude maximum for storage is 70 KPa.  
Dimensions  
Height  
1.69 in/4.29 cm  
Operating and Performance  
Specifications for ProLiant BL20p Server  
Blade  
Width  
10.29 in/26.14 cm  
28.00 in/71.12 cm  
Depth  
Weight (maximum)  
18.0 lb/8.17 kg  
Operating  
Non-operating  
Shipping  
Temperature range  
50° to 95° F/10° to 35° C  
-40° to 140° F/-40° to 60° C  
-4° to 140° F/-20° to 60° C  
10% to 90%  
Storage  
Relative humidity  
(non-condensing)  
Operating  
Non-operating  
Shipping  
10% to 90%  
10% to 95%  
Storage  
Maximum wet bulb  
temperature  
82° F/28° C  
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight.  
Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144  
m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of  
113° F/45° C. Altitude maximum for storage is 70 KPa.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
19  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
10.405 in/26.43 cm  
1.535 in/3.899 cm  
27.697 in/70.35 cm  
Dimensions  
Height  
Width  
Depth  
Operating and Performance  
Specifications for RJ-45 Patch Panel  
Capability  
IEEE 802.2, 802.3, 802.3u  
10 Base-T (half-duplex)  
10 Base-T (full-duplex)  
100 Base-TX (half-duplex)  
100 Base-TX (full-duplex)  
1000 Base-TX (full-duplex)  
RJ-45  
10 Mbps  
Network transfer rate  
20 Mbps  
100 Mbps  
200 Mbps  
1000 Mbps  
Connector  
Cable support  
10 Base-TX  
Categories 3, 4, or 5 UTP (2 or 4 pair); up to  
328 ft/100 m  
100 Base-TX  
1000 Base-TX  
Category 5 UTP (2 pair); up to 328 ft/100 m  
Category 5E (4 pair); up to 328 ft/100 m  
Power requirements  
Temperature range  
200 mA at +5V DC; 500 mA at -48V  
Operating  
50° to 95° F/10° to 35° C  
-22° to 140° F/-30° to 60° C  
20% to 80%  
Non-operating  
Operating  
Relative humidity (non-  
condensing)  
5% to 95%  
Non-operating  
Operating  
82.4° F/28° C  
Wet bulb temperature  
101.7° F/38.7° C  
Non-operating  
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight.  
Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144  
m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of  
113° F/45° C. Altitude maximum for storage is 70 KPa.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
20  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
Dimensions  
Operating and Performance  
Specifications for Interconnect  
GbE Switch  
Height  
Width  
Depth  
10.405 in/26.43 cm  
1.535 in/3.899 cm  
27.697 in/70.35 cm  
Weight  
11.5 lb/5.2 kg per interconnect switch  
Performance  
3.2 Gbps Switching bandwidth per server enclosure  
4.4 Gbps uplink bandwidth per server enclosure  
9.6 Million pps aggregate throughput per server enclosure (64-byte packets)  
Full-wire speed for all connections  
Auto-negotiation and auto-sensing with full-duplex support  
Store and forward  
Forwarding mode  
MAC Addresses  
8,191 per interconnect switch; MAC address based filtering and MAC address  
packet priority configuring  
Forwarding table age time  
Memory  
Maximum age: 10 to 9999 seconds; default: 3000 seconds  
32MB Main, 6MB flash and 16MB packet buffer per interconnect switch  
Compliance  
IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.1D, 802.1p, 802.3ac, 802.3ad  
(Static), 802.1Q, and 802.3x  
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9  
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233),  
801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9, and  
Ethernet MIB (RFC1643)  
Network transfer rate  
10 Base-T (half-duplex)  
10 Base-T (full-duplex)  
10 Mbps  
20 Mbps  
100 Base-TX (half-duplex)  
100 Base-TX (full-duplex)  
1000 Base-TX (half-duplex)  
1000 Base-TX (full-duplex)  
1000 Base-SX (full-duplex)  
100 Mbps  
200 Mbps  
1000 Mbps  
2000 Mbps  
2000 Mbps  
Connector  
EMI  
RJ-45, DB-9 (C-GbE Interconnect Kit)  
LC fiber, RJ-45, DB-9 (F-GbE Interconnect Kit)  
FCC Class A  
ICES-003 Class A  
AS/NZS 3548 Class A  
VCCI Class A  
Safety  
UL/CUL Listed Accessory  
Power requirements  
Temperature range  
48V: 1050 mA, 50 W maximum (per interconnect switch)  
Operating  
50° to 95° F/10° to 35° C  
-22° to 140° F/-30° to 60° C  
20% to 80%  
Non-operating  
Operating  
Relative humidity  
(non-condensing)  
Non-operating  
Operating  
Non-operating  
5% to 95%  
82.4° F/28° C  
101.7° F/38.7° C  
Wet bulb temperature  
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper  
operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144 m or  
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of  
113° F/45° C. Altitude maximum for storage is 70 KPa.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
21  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
Operating and Performance  
Specifications for Power  
Enclosures (North America/Japan)  
Single-Phase Model  
Three-Phase Model  
5.25 in/13.34 cm  
5.25 in/13.34 cm  
Dimensions  
Height  
27.15 in/68.96 cm  
17.60 in/44.7 cm  
47.5 lb/21.55 kg  
99.5 lb/45.13 kg  
200 VAC to 240 VAC  
27.15 in/68.96 cm  
17.60 in/44.7 cm  
47.5 lb/21.55 kg  
125.5 lb/56.93 kg  
Width  
Depth  
Weights  
No hot-plug power supplies  
All hot-plug power supplies  
Rated input voltage  
200 VAC to 240 VAC line  
to line  
Input requirements  
50 Hz to 60 Hz  
24A  
50 Hz to 60 Hz  
24A per phase  
9976 W  
Rated input frequency  
Rated input current per side  
Rated input power per side  
Power cord  
5760 W  
1 NEMA L6-30P per side 1 NEMA L15-30 per side  
-48.8 VDC to -54 VDC  
99A  
-48.8 VDC to -54 VDC  
170A  
Output voltage  
specifications  
Rated output voltage  
Rated output current  
Rated output power  
Nominal power  
4298 W  
8310 W  
4158 W at 208 VAC  
7202 W at 208 VAC  
Ambient temperature  
range (See note)  
Operating  
50° to 95° F/10° to 35° C 50° to 95° F/10° to 35° C  
-22° to 140°F/-30° to 60°C -22° to 140°F/-30° to 60°C  
Shipping  
20% to 80%  
5% to 95%  
20% to 80%  
5% to 95%  
Relative humidity,  
non-condensing  
(See note)  
Operating  
Non-operating  
82.4° F/28° C  
82.4° F/28° C  
Wet bulb temperature  
Operating  
101.7° F/38.7° C  
101.7° F/38.7° C  
Non-operating  
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper  
operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144 m or  
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of  
113° F/45° C. Altitude maximum for storage is 70 KPa.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
22  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
Operating and Performance  
Specifications for Power  
Enclosures (International)  
Single-Phase Model  
5.25 in/13.34 cm  
Three-Phase Model  
5.25 in/13.34 cm  
Dimensions  
Height  
27.15 in/68.96 cm  
27.15 in/68.96 cm  
Width  
17.60 in/44.7 cm  
47.5 lb/21.55 kg  
99.5 lb/45.13 kg  
200 VAC to 240 VAC  
17.60 in/44.7 cm  
47.5 lb/21.55 kg  
125.5 lb/56.93 kg  
6.25 A at -48 VDC  
Depth  
Weights  
No hot-plug power supplies  
All hot-plug power supplies  
Rated input voltage  
Input requirements  
200 VAC to 240 VAC line  
to neutral  
50 Hz to 60 Hz  
24A  
50 Hz to 60 Hz  
20A per phase  
10,552 W  
Rated input frequency  
Rated input current per side  
Rated input power per side  
Power cord  
5760 W  
1 IEC 309 3-pin, 32A per  
side  
1 IEC 309 5-pin, 32A per  
side  
-48.8 VDC to -54 VDC  
-48.8 VDC to -54 VDC  
Output voltage  
specifications  
Rated output voltage  
Rated output current  
Rated output power  
Nominal power  
99A  
180A  
4798 W  
8790 W  
4598 W at 208 VAC  
8790 W at 230 VAC L-N  
50° to 95° F/10° to 35° C 50° to 95° F/10° to 35° C  
-22° to 140°F/-30° to 60°C -22° to 140°F/-30° to 60°C  
Ambient temperature Operating  
range (See note)  
Shipping  
20% to 80%  
5% to 95%  
20% to 80%  
5% to 95%  
Relative humidity,  
non-condensing  
(See note)  
Operating  
Non-operating  
Wet bulb temperature Operating  
Non-operating  
82.4° F/28° C  
82.4° F/28° C  
101.7° F/38.7° C  
101.7° F/38.7° C  
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper  
operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144 m or  
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of  
113° F/45° C. Altitude maximum for storage is 70 KPa.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
23  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
Operating and Performance  
Power Bus Box  
Mini Bus Bar  
Scalable Bus Bar  
Specifications for Power  
Distribution Devices  
Power enclosures or facility  
DC feeds supported  
(3U each)  
1
1
2
Server blade enclosures  
1
3
5
supported (6U each)  
Total rack height of supported  
enclosures  
9U  
21U  
36U  
Dimensions  
5.1 in/12.95 cm  
19.45 in/49.40 cm  
19.74 in/50.14 cm  
2.2 in/5.59 cm  
48.57 in/123.37 cm  
19.74 in/50.14 cm  
2.2 in/5.59 cm  
Height  
3.6 in/9.14 cm each  
3.25 in/8.26 cm  
3.62 lb/1.64 kg  
Width  
Depth  
Weight  
13.2 lb/59.9 kg  
26 lb/11.79 kg  
Rated operating voltage  
Max total power supported  
-43.2 VDC to -54 VDC  
3000 W  
-43.2 VDC to -54 VDC -43.2 VDC to -54 VDC  
9000 W 15,000 W  
Total max input current at  
minimum voltage  
69.44 A at -43.2VDC  
208.32 A at -43.2 VDC 347.2 A at -43.2 VDC  
(equivalent of 175A per  
feed)  
Total max input current at  
nominal voltage  
62.5 A at -48VDC  
187.5 A at -48 VDC  
312.5 A at -48 VDC  
(equivalent of 175A per  
feed)  
Max current per power feed 70A  
210A  
210A  
Max local ambient  
temperature  
149° F/65° C  
149° F/65° C  
149° F/65° C  
Note: All systems support redundant A & B feeds. Scalable bus bar supports dual A and dual B feeds.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
24  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
Operating and Performance  
Specifications for Facility DC  
Voltage  
Nominal input voltage  
-48 VDC  
Operating voltage range  
-48VDC ± 10% or -43.2 VDC to -52.8 VDC  
Max Input voltage slew rate  
0.5V/uS  
Redundant feed voltages*  
(A & B)  
*A and B feeds must differ by no more than  
5VDC during steady state operation  
Ripple/Noise  
Overshoot  
480 mV PARD**  
Must remain within regulation limits on all feeds  
during startup or shutdown  
Voltage transients  
Must not exceed -60 VDC  
Current  
Max steady state input current 62.5A per server blade enclosure installed at  
-48VDC  
Max steady state current per  
feed/total  
Power bus boxes  
Mini bus bars  
70 A/70A  
210 A/210A  
Scalable bus bars  
210 A/350A or equivalent of 175A per feed*  
In-rush current  
Must support up to 2X the maximum operating current per server blade  
enclosure (125 A) for up to 1.0 mS  
Input over-current  
Customer provided fusing for facility DC feeds that protects the system from  
catastrophic over-current within 20 uS. Fuse should sustain all in-rush and  
operating currents.  
Max Input Current Slew Rate 1A/uS  
Max Rated Power  
3000W per server blade enclosure  
Compaq provided facility DC cable connection kit:  
Connections and Cables  
The facility DC connection kit supports the connection of up to four -  
48VDC, RETURN pairs and ground.  
The power cable assemblies consist of 1/0AWG, color-coded, flexible cable  
rated at 105° C, terminated with bus mating connectors at one end and  
unterminated at the other end. The cable length provided enables the customer  
to route to a fuse panel within or adjacent to the rack.  
Note: *All systems support redundant A and B feeds. Scalable bus bars support dual A and dual B feeds.  
** Periodic and random noise (PARD). Maximum allowable peak-to-peak ripple and noise (as measured at  
the load on any output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency  
band. A resistive load (non-electronic) is used for this measurement. Each output is by-passed to return  
by a 10uF tantalum capacitor with an ESR less than 100 milli-Ohms in parallel with a 0.47 uF ceramic  
capacitor, at the point of load. The load cable is 12 feet of twisted wire capable of carrying the current.  
The printed wiring board assembly is installed in its enclosure for this measurement, or the measurement  
leads are properly shielded with Earth grounds applied to the insert.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
25  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
Compaq Rack 10842  
Dimensions  
Total Cabinet  
Shipping  
Color  
(42U)(optional)  
Height  
78.7 in/199.9 cm  
85in/215.9 cm  
Depth  
Width  
39.691 in/100.82 cm  
31.5 in/ 80.01cm  
48 in/121.92 cm  
Graphite Metallic – doors  
Carbon – frame  
43.5 in/110.49 cm  
Weight  
295 lb/133.8 kg  
335lb/151.95 kg  
Compaq Rack 10647  
Dimensions  
Total Cabinet  
Shipping  
Color  
(47U)(optional)  
Height  
89.96 in/228.5 cm  
95.47 in/242.49 cm  
Depth  
Width  
Weight  
39.691 in/100.82 cm  
24 in/60.96 cm  
245 lb/111 kg  
48 in/121.92 cm  
32 in/81.28 cm  
284 lb/129 kg  
Graphite Metallic – doors  
Carbon – frame  
Compaq Rack 10642  
(42U)(optional)  
Dimensions  
Height  
Total Cabinet  
78.7 in/199.90 cm  
Shipping  
86.22 in/219 cm  
Color  
Depth  
Width  
Weight  
39.691 in/100.82 cm  
24 in/60.96 cm  
48 in/121.92 cm  
32 in/81.28 cm  
325 lb/147.52 kg  
Graphite Metallic – doors  
Carbon – frame  
253 lb/114.84 kg  
Compaq Rack 10636  
Dimensions  
Total Cabinet  
Shipping  
Color  
(36U)(optional)  
Height  
68.6 in/174.24 cm  
75.25 in/191.14 cm  
Graphite Metallic – doors  
Carbon – frame  
Depth  
Width  
Weight  
39.691 in/100.82 cm  
24 in/60.96 cm  
220 lb/100 kg  
48 in/121.92 cm  
32 in/81.28 cm  
272 lb/123 kg  
Compaq Rack 10622  
(22U)(optional)  
Dimensions  
Height  
Total Cabinet  
43 in/109.22 cm  
Shipping  
52.25 in/132.72 cm  
Color  
Depth  
Width  
Weight  
39.691 in/100.82 cm  
24 in/60.96 cm  
48 in/121.92 cm  
32 in/81.28 cm  
225 lb/102.13 kg  
Graphite Metallic – doors  
Carbon – frame  
176 lb/79.89 kg  
Compaq Rack 9842  
(42U)(optional)  
Dimensions  
Height  
Total Cabinet  
78.7 in/199.9 cm  
Shipping  
86.22 in/219 cm  
Color  
Depth  
Width  
Weight  
35.8 in/90.932 cm  
31.5 in/80.01 cm  
374 lb/170 kg  
48 in/121.92 cm  
38.8 in/98.55 cm  
440 lb/200 kg  
Opal  
Compaq Rack 9142  
(42U)(optional)  
Dimensions  
Height  
Total Cabinet  
78.7 in/199.9 cm  
Shipping  
83.38 in/211.79 cm  
Color  
Depth  
Width  
Weight  
35.8 in/90.932 cm  
23.7 in/60.2 cm  
253 lb/114.84 kg  
48 in/121.92 cm  
32 in/81.28 cm  
325 lb/147.52 kg  
Opal  
DA-11411  
World Wide — Version 4 — September 19, 2002  
26  
QuickSpecs  
ProLiant BL20p and p-Class system  
Technical Specifications  
Compaq Rack 9136  
(36U)(optional)  
Dimensions  
Total Cabinet  
68.6 in/174.24 cm  
35.8 in/90.932 cm  
23.7 in/60.2 cm  
165 lb/75 kg  
Shipping  
75.25 in/191.14 cm  
48 in/12.192 cm  
32 in/81.28 cm  
234 lb/106 kg  
Color  
Height  
Depth  
Width  
Weight  
Opal  
Compaq Rack 9122  
(22U)(optional)  
Dimensions  
Height  
Total Cabinet  
43 in/109.22 cm  
Shipping  
52.25 in/132.72 cm  
Color  
Depth  
Width  
Weight  
35.8 in/90.932 cm  
24 in/60.96 cm  
176 lb/79.89 kg  
48 in/121.92 cm  
32 in/81.28 cm  
225 lb/102.13 kg  
Opal  
© 2002 Compaq Information Technologies Group, LP.  
Compaq, the Compaq logo, ActiveUpdate, CarePaq, Insight Manager, ProLiant and ROMPaq are trademarks of Compaq Information Technologies Group,  
L.P. in the U.S. and/or other countries. Microsoft, Microsoft.NET and Windows are registered trademarks or trademarks of Microsoft Corporation in the U.S.  
and/or other countries. Intel and Pentium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries. Linux is a registered  
trademark or trademark of Linus Torvalds in the U.S. and/or other countries. Red Hat is a registered trademark or trademark of Red Hat Inc., in the U.S., and  
other countries. All other product names mentioned herein may be trademarks of their respective companies.  
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information is provided “as is” without warranty of any kind and  
is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such  
products. Nothing herein should be construed as constituting an additional warranty.  
DA-11411  
World Wide — Version 4 — September 19, 2002  
27  

HP Hewlett Packard PCI SCOPE PREPROCESSOR FSPCI64S User Manual
GE Monogram ZGU48L6R User Manual
Elo TouchSystems Elo Entuitive 3000 Series 1729L User Manual
Electrolux 922045 User Manual
Eizo Nanao Computer Monitor FDU2602WT User Manual
Diamond Systems PROMETHEUS PR Z32 EA ST User Manual
DCS BGC 3036 User Manual
BenQ FP71G+ User Manual
Behringer EUROPOWER EP2500 User Manual
Apple 073 0560 User Manual