ASRock Computer Hardware 4CORE1600 GLAN User Manual

4Core1600-GLAN

User Manual

Version 1.0

PublishedApril 2008

Contents

1 Introduction ................................................... 5

1.1 Package Contents .......................................................... 5

1.2 Specifications ................................................................. 6

1.3 Minimum Hardware Requirement Table for Windows^®

Vista^TMPremium 2007 and Basic Logo.......................... 9

1.4 Motherboard Layout ........................................................ 10

1.5 ASRock 6CH I/O Pro ...................................................... 11

2 Installation..................................................... 12

2.1 Screw Holes ................................................................... 12

2.2 Pre-installation Precautions ............................................ 12

2.3 CPU Installation .............................................................. 13

2.4 Installation of Heatsink and CPU fan ............................... 15

2.5 Installation of Memory Modules (DIMM) ......................... 16

2.6 Expansion Slots (PCI and PCI Express Slots) ..................... 18

2.7 Jumpers Setup ............................................................... 19

2.8 Onboard Headers and Connectors .................................. 20

2.9 HDMI_SPDIF Header ConnectionGuide ......................... 24

2.10 SATAII Hard Disk Setup Guide ........................................ 25

2.11 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks

Installation...................................................................... 26

2.12 Driver Installation Guide .............................................. 26

2.13 Untied Overclocking Technology ................................... 26

3 BIOS SETUP UTILITY.......................................... 27

3.1 Introduction ..................................................................... 27

3.1.1 BIOS Menu Bar..................................................... 27

3.1.2 Navigation Keys .................................................... 28

3.2 Main Screen ................................................................... 28

3.3 Advanced Screen ............................................................ 28

3.3.1 CPU Configuration ................................................ 29

3.3.2 Chipset Configuration ............................................ 31

3.3.3 ACPI Configuration ................................................ 33

3.3.4 IDE Configuration .................................................. 34

3.3.5 PCIPnP Configuration ........................................... 36

3.3.6 Floppy Configuration ............................................. 37

3.3.7 Super IO Configuration .......................................... 37

3.3.8 USB Configuration ................................................ 38

3.4 Hardware Health Event Monitoring Screen...................... 39

3.5 Boot Screen ................................................................... 40

3.5.1 Boot Settings Configuration ................................... 41

3.6 Security Screen.............................................................. 41

3.7 Exit Screen .................................................................... 42

4 Software Support .......................................... 43

4.1 Install Operating System ................................................ 43

4.2 Support CD Information ................................................... 43

4.2.1 Running Support CD ............................................. 43

4.2.2 Drivers Menu ......................................................... 43

4.2.3 Utilities Menu ........................................................ 43

4.2.4 Contact Information ............................................... 43

Chapter 1 Introduction

Thank you for purchasing ASRock 4Core1600-GLAN motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control. It delivers

excellent performance with robust design conforming to ASRock’s commitment to qual-

ity and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-

step guide to the hardware installation. Chapter 3 and 4 contain the configuration

guide to BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock 4Core1600-GLAN Motherboard

(ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm)

ASRock 4Core1600-GLAN Quick Installation Guide

ASRock 4Core1600-GLAN Support CD

One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable

One Ribbon Cable for a 3.5-in FloppyDrive

One Serial ATA (SATA) Data Cable (Optional)

One Serial ATA (SATA) HDD Power Cable (Optional)

One HDMI_SPDIF Cable (Optional)

One “ASRock 6CH I/O Pro” I/O Panel Shield

1.2

Platform

CPU

- ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm

- LGA 775 for Intel^®Core^TM2 Extreme / Core^TM2 Quad / Core^TM

2Duo / Pentium^®Dual Core / Celeron^®, supporting Penryn Quad

Core Yorkfield and Dual Core Wolfdale processors

- Compatible with all FSB1600/1333/1066/800MHz CPUs

(see CAUTION 1)

- Supports Hyper-Threading Technology (see CAUTION 2)

- Supports Untied Overclocking Technology (see CAUTION 3)

- Supports EM64T CPU

Chipset

Memory

- Northbridge: Intel^®P31/G31

- Southbridge: Intel^®ICH7

-Dual Channel DDR2 Memory Technology (see CAUTION 4)

- 4 x DDR2 DIMM slots (see CAUTION 5)

- Support DDR2 800/667 non-ECC, un-buffered memory

(see CAUTION 6)

- Max. capacity of system memory: 4GB (see CAUTION 7)

- CPU Frequency Stepless Control (see CAUTION 8)

- ASRock U-COP (see CAUTION 9)

- Boot Failure Guard (B.F.G.)

Hybrid Booster

Expansion Slot

- 1 x PCI Express x16 slot

- 2 x PCI Express x1 slots

- 3 x PCI slots

Audio

LAN

- 5.1 CH Windows^®Vista^TMPremium Level HDAudio

(ALC662 Audio Codec)

- PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111B/RTL8111C

- Supports Wake-On-LAN

Rear Panel I/O

ASRock 6CH I/O Pro

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x Serial Port: COM1

- 1 x Parallel Port (ECP/EPP Support)

- 4 x Ready-to-Use USB 2.0 Ports

- 1 x RJ-45 LAN Port

- HDAudio Jack: Line in/Front Speaker/Microphone

Connector

- 4 x Serial ATAII 3.0Gb/s connectors (No support for RAID and

“Hot Plug” functions) (see CAUTION 10)

- 1 x ATA100 IDE connector (supports 2 x IDE devices)

- 1 x Floppy connector

- 1 x DeskExpress Hot Plug Detection header

- 1 x HDMI_SPDIF header

- CPU/Chassis FAN connector

- 24 pin ATX power connector

- 4 pin 12V power connector

- CD in header

- Front panel audio connector

- 2 x USB 2.0 headers (support 3 USB 2.0 ports)

(see CAUTION 11)

- 1 x WiFi/E header (see CAUTION 12)

- 4Mb AMI BIOS

BIOS Feature

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- AMBIOS 2.3.1 Support

Support CD

Hardware

Monitor

- Drivers, Utilities, AntiVirus Software (Trial Version)

- CPU Temperature Sensing

- Chassis Temperature Sensing

- CPU Fan Tachometer

- Chassis Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

- Microsoft^®Windows^®2000 / XP / XP 64-bit / Vista^TM

Vista^TM64-bit compliant

Certifications

- FCC, CE, WHQL

* For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

CAUTION!

1. FSB1600-CPU will operate in overclocking mode. Under this situation,

PCIE frequency will also be overclocked to 120MHz. If you use a FSB1600-

CPU on this motherboard, you need to adjust the jumpers. If you want to

overclock the CPU you adopt from FSB800 to FSB1066, you need to

adjust the jumpers as well. Please refer to page 19 for proper jumper

settings.

2. About the setting of “Hyper Threading Technology”, please check page

30.

3. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 26 for details.

4. This motherboard supports Dual Channel Memory Technology. Before

you implement Dual Channel Memory Technology, make sure to read

the installation guide of memory modules on page 16 for proper

installation.

5. There are memory module installation limitations on this motherboard,

please read “Installation of Memory Modules (DIMM)” on page 16 for

details.

6. Please check the table below for the CPU FSB frequency and its

corresponding memory support frequency.

CPU FSB Frequency

Memory Support Frequency

DDR2 800

1600

1333

1066

800

DDR2 667, DDR2 800

7. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows^®XP

and Windows^®Vista^TM. For Windows^®XP 64-bit and Windows^®Vista^TM64-

bit with 64-bit CPU, there is no such limitation.

8. Although this motherboard offers stepless control, it is not recom-

mended to perform over-clocking. Frequencies other than the recom-

mended CPU bus frequencies may cause the instability of the system

or damage the CPU.

9. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC

system.

10. Before installing SATAII hard disk to SATAII connector, please read the

“SATAII Hard Disk Setup Guide” on page 25 to adjust your SATAII hard

disk drive to SATAII mode. You can also connect SATA hard disk to SATAII

connector directly.

11. Power Management for USB 2.0 works fine under Microsoft^®Windows^®

Vista^TM64-bit / Vista^TM/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.

12. WiFi/E header supports WiFi+AP function with ASRock WiFi-802.11g or

WiFi-802.11n module, an easy-to-use wireless local area network

(WLAN) adapter. It allows you to create a wireless environment and

enjoy the convenience of wireless network connectivity. Please visit our

website for the availability of ASRock WiFi-802.11g or WiFi-802.11n

module. ASRock website http://www.asrock.com

1.3

s^®

Vista^TMPremium 2007 and Basic Logo

For system integrators and users who purchase this motherboard and

plan to submit Windows^®Vista^TMPremium 2007 and Basic logo, please

follow below table for minimum hardware requirements.

CPU

Celeron 420

Memory

1GB system memory (Premium)

512MB Single Channel (Basic)

DX9.0 with WDDM Driver

VGA

with 128bit VGA memory (Premium)

with 64bit VGA memory (Basic)

* After June 1, 2007, all Windows^®Vista^TMsystems are required to meet above

minimum hardware requirements in order to qualify for Windows^®Vista^TMPremium

2007 logo.

1.4 Motherboard Layout

21.8cm (8.6 in)

PS2_USB_PWR1

PS2

Mouse

ATX12V1

CPU_FAN1

USB 2.0

T: USB2

B: USB3

USB 2.0

T: USB0

B: USB1

Top:

RJ-45

IDE1

Intel

P31/G31

Chipset

PCI

EXPRESS

PCIE1

LAN

PHY

CMOS

Battery

PCIE2

Super

I/O

CLRCMOS1

PCIE3/DE

Gigabit LAN

Intel

ICH7

PCI1

PCI2

AUDIO

CODEC

RoHS

USB6

4Mb

BIOS

WIFI/E

SATAII_1 (Port0)

SATAII_4 (Port3)

SATAII_3 (Port2)

SATAII_2 (Port1)

PCI3

FLOPPY1

CD1

PLED PWRBTN

HD_AUDIO1

USB4_5

IR1

HDMI_SPDIF1

SPEAKER1

PANEL1

RESET

HDLED

2120 18

16 15

PS2_USB_PWR1 Jumper

ATX 12V Connector (ATX12V1)

17 SATAII Connector (SATAII_1 (Port0))

18 USB 2.0 Header (USB4_5, Blue)

19 USB 2.0 Header (USB6, Blue)

20 Flash Memory

ATX Power Connector (ATXPWR1)

775-Pin CPU Socket

North Bridge Controller

21 Chassis Speaker Header (SPEAKER 1)

22 DeskExpress Hot Plug Detection Header

(IR1)

CPU Fan Connector (CPU_FAN1)

2 x 240-pin DDR2 DIMM Slots

(Dual Channel A: DDRII_1, DDRII_3; Yellow)

2 x 240-pin DDR2 DIMM Slots

23 Floppy Connector (FLOPPY1)

24 HDMI_SPDIF Header (HDMI_SPDIF1)

25 Internal Audio Connector: CD1 (Black)

26 Front Panel Audio Header (HD_AUDIO1)

27 WiFi/E Header (WIFI/E)

(Dual Channel B: DDRII_2, DDRII_4; Orange)

IDE1 Connector (IDE1, Blue)

10 Clear CMOS Jumper (CLRCMOS1)

11 South Bridge Controller

28 PCI Slots (PCI1 - 3)

12 Chassis Fan Connector (CHA_FAN1)

13 SATAII Connector (SATAII_4 (Port3))

14 SATAII Connector (SATAII_3 (Port2))

15 System Panel Header (PANEL1)

16 SATAII Connector (SATAII_2 (Port1))

29 PCI Express x1 Slot (PCIE3/DE)

30 PCI Express x1 Slot (PCIE2)

31 PCI Express x16 Slot (PCIE1)

32 FD Jumper

1.5

Parallel Port

RJ-45 Port

USB 2.0 Ports (USB01)

USB 2.0 Ports (USB23)

Serial Port: COM1

Line In (Light Blue)

Front Speaker (Lime)

Microphone (Pink)

PS/2 Keyboard Port (Purple)

10 PS/2 Mouse Port (Green)

* To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows^®XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox”

, click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker

and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then

reboot your system.

For Windows^®Vista^TM

After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio

streams simultaneously”, and click “ok”. Then reboot your system.

Chapter 2 Installation

4Core1600-GLAN is an ATX form factor (12.0" x 8.6", 30.5 x 21.8 cm) motherboard.

Before you install the motherboard, study the configuration of your chassis to ensure

that the motherboard fits into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the

chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity, NEVER

place your motherboard directly on the carpet or the like. Also remember to use

a grounded wrist strap or touch a safety grounded object before you handle

components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

2.3 CPU Installation

For the installation of Intel 775-LAND CPU,

please follow the steps below.

775-Pin Socket Overview

Before you insert the 775-LAND CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear

retention tab.

Step 1-2. Rotate the load lever to fully open po-

sition at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open po-

sition at approximately 100 degrees.

Step 2. Insert the 775-LAND CPU:

Step 2-1. Hold the CPU by the edges where are

marked with black lines.

Step 2-2. Orient the CPU with IHS (Integrated

Heat Sink) up. Locate Pin1 and the two

orientation key notches.

Pin1

alignment key

orientation

key notch

orientation

key notch

775-PinSocket

775-LAND CPU

For proper inserting, please ensure to match the two orientation key

notches of the CPU with the two alignment keys of the socket.

Step 2-3. Carefully place the CPU into the socket

by using a purely vertical motion.

Step 2-4. Verify that the CPU is within the socket

and properly mated to the orient keys.

Step 3. Remove PnP Cap (Pick and Place Cap):

Use your left hand index finger and thumb to

support the load plate edge, engage PnP cap

with right hand thumb and peel the cap from the

socket while pressing on center of PnP cap to

assist in removal.

1. It is recommended to use the cap tab to handle and avoid kicking

off the PnP cap.

2. This cap must be placed if returning the motherboard for after

service.

Step 4. Close the socket:

Step 4-1. Rotate the load plate onto the IHS.

Step 4-2. While pressing down lightly on load

plate, engage the load lever.

Step 4-3. Secure load lever with load plate tab

under retention tab of load lever.

2.4

This motherboard is equipped with 775-Pin socket that supports Intel 775-LAND CPU.

Please adopt the type of heatsink and cooling fan compliant with Intel 775-LAND CPU

to dissipate heat. Before you installed the heatsink, you need to spray thermal

interface material between the CPU and the heatsink to improve heat dissipation.

Ensure that the CPU and the heatsink are securely fastened and in good contact with

each other. Then connect the CPU fan to the CPU_FAN connector (CPU_FAN1, see

page 10, No. 6).

For proper installation, please kindly refer to the instruction manuals of

your CPU fan and heatsink.

Below is an example to illustrate the installation of the heatsink for 775-LAND CPU.

Step 1. Apply thermal interface material onto center

of IHS on the socket surface.

Step 2. Place the heatsink onto the socket. Ensure

fan cables are oriented on side closest to the

CPU fan connector on the motherboard

(CPU_FAN1, see page 10, No. 6).

Step 3. Align fasteners with the motherboard

throughholes.

Step 4. Rotate the fastener clockwise, then press

down on fastener caps with thumb to install

and lock. Repeat with remaining fasteners.

If you press down the fasteners without rotating them clockwise,

the heatsink cannot be secured on the motherboard.

Step 5. Connect fan header with the CPU fan

connector on the motherboard.

Step 6. Secure excess cable with tie-wrap to ensure

cable does not interfere with fan operation or

contact other components.

2.5 Installation of Memor

(

)

4Core1600-GLAN motherboard provides four 240-pin DDR2 (Double Data Rate 2)

DIMM slots, and supports Dual Channel Memory Technology. For dual channel

configuration, you always need to install identical (the same brand, speed, size

and chip-type) DDR2 DIMM pair in the slots of the same color. In other words, you

have to install identicalDDR2DIMM pair in Dual Channel A(DDRII_1 andDDRII_3;

Yellow slots; see p.10 No.7) or identical DDR2 DIMM pair in Dual Channel B

(DDRII_2 andDDRII_4; Orange slots; see p.10No.8), so that Dual Channel Memory

Technology can be activated. This motherboard also allows you to install fourDDR2

DIMMs for dual channel configuration, and please install identicalDDR2 DIMMs in

all four slots. You may refer to theDual Channel Memory Configuration Table below.

Dual Channel Memory Configurations

(DS: Double Side, SS: Single Side)

DDRII_1

DDRII_2

DDRII_3

DDRII_4

(Yellow Slot) (Orange Slot) (Yellow Slot) (Orange Slot)

2 memory modules SS

2 memory modules DS

2 memory modules X

4 memory modules SS

1. If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots of the

same color. In other words, install them either in the set of yellow

slots (DDRII_1 and DDRII_3), or in the set of orange slots (DDRII_2

and DDRII_4).

2. If only one memory module or three memory modules are installed

in the DDR2 DIMM slots on this motherboard, it is unable to acti-

vate the Dual Channel Memory Technology.

3. If a pair of memory modules is NOT installed in the same Dual

Channel, for example, installing a pair of memory modules in DDRII_1

and DDRII_2, it is unable to activate the Dual Channel Memory

Technology .

4. It is not allowed to install a DDR memory module into DDR2 slot;

otherwise, this motherboard and DIMM may be damaged.

Recommended Memory Configurations

(DS: Double Side, SS: Single Side)

DDRII_1

DDRII_2

DDRII_3

DDRII_4

(Yellow Slot) (Orange Slot) (Yellow Slot) (Orange Slot)

1 memory module DS/SS*

2 memory modules DS/SS

2 memory modules X

DS/SS

3 memory modules SS

4 memory modules SS

DS/SS

* If you only install one memory module, you can install it to any one of the four slots.

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

notch

break

notch

break

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the slot

at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

2.6 Expansion Slots (PCI and PCI Express Slots)

There are 3 PCI slots and 3 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane

width graphics cards.

PCIE2 / PCIE3/DE (PCIE x1 slot) is used for PCI Express cards with x1

lane width cards, such as Gigabit LAN card, SATA2 card and ASRock

PCIE_DE card.

If you want to use ASRock DeskExpress function on this motherboard,

please install ASRock PCIE_DE card on PCIE3/DE slot.

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power supply

is switched off or the power cord is unplugged. Please read the documentation

of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 3. Align the card connector with the slot and press firmly until the card is com-

pletely seated on the slot.

Step 4. Fasten the card to the chassis with screws.

2.7 Jumpers Setup

The illustration shows how jumpers are setup.

When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap is

placed on pins, the jumper is “Open”. The il-

lustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when jumper cap is

placed on these 2 pins.

Jumper

Setting

Description

PS2_USB_PWR1

(see p.10 No. 1)

Short pin2, pin3 to enable

+5VSB (standby) for PS/2

or USB wake up events.

1_2

2_3

+5V

+5VSB

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

Clear CMOS

(CLRCMOS1, 2-pin jumper)

2-pin jumper

(see p.10 No. 10)

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes

system setup information such as system password, date, time, and system

setup parameters. To clear and reset the system parameters to default setup,

please turn off the computer and unplug the power cord from the power

supply. After waiting for 15 seconds, use a jumper cap to short 2 pins on

CLRCMOS1 for 5 seconds.

FDJumper

(FD, 3-pin jumper, see p.10 No. 32)

1_2

Default

Note1: If you use a FSB1600-CPU on this motherboard, you need to adjust the jumpers.

Please short pin2, pin3 for FD jumper. Otherwise, the CPU may not work

properly on this motherboard. Please refer to below jumper settings.

2_3

Note2: If you want to overclock the FSB800-CPU you adopt to FSB1066 on this

motherboard, you need to adjust the jumpers. Please short pin2, pin3 for FD

jumper. Otherwise, the CPU may not work properly on this motherboard. Please

2_3

refer to below jumper settings.

2.8 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

FDD connector

(33-pin FLOPPY1)

(see p.10 No. 23)

FLOPPY1

Pin1

the red-striped side to Pin1

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the

connector.

Primary IDE connector (Blue)

(39-pin IDE1, see p.10 No. 9)

IDE1

PIN1

connect the black end

to the IDE devices

connect the blue end

to the motherboard

80-conductor ATA 66/100 cable

Note: Please refer to the instruction of your IDE device vendor for the details.

Serial ATAII Connectors

(SATAII_1 (Port0):

These four Serial ATAII (SATAII)

connectors support SATA data

cables for internal storage

devices. The current SATAII

interface allows up to 3.0 Gb/s

data transfer rate.

see p.10, No. 17)

SATAII_1 (Port0)

SATAII_4 (Port3)

SATAII_3 (Port2)

(SATAII_2 (Port1):

see p.10, No. 16)

(SATAII_3 (Port2):

SATAII_2 (Port1)

see p.10, No. 14)

(SATAII_4 (Port3):

see p.10, No. 13)

SerialATA (SATA)

Data Cable

Either end of the SATA data cable

can be connected to the SATA /

SATAII hard disk or the SATAII

connector on this motherboard.

(Optional)

SerialATA (SATA)

Power Cable

(Optional)

Please connect the black end of

SATA power cable to the power

connector on each drive. Then

connect the white end of SATA

power cable to the power

connect to the SATA

HDD power connector

connect to

the power

supply

connector of the power supply.

USB_PWR

P-4

USB 2.0 Headers

(9-pin USB4_5)

Besides four default USB 2.0

ports on the I/O panel, there are

two USB 2.0 headers on this

motherboard. USB4_5headercan

support two USB 2.0 ports, and

USB6 header can support one

USB 2.0 port.

P+4

GND

DUMMY

(see p.10 No. 18)

GND

P+5

P-5

USB_PWR

(4-pin USB6)

GND

P+6

P-6

USB_PWR

(see p.10 No. 19)

WiFi/E Header

(15-pin WIFI/E)

This header supports WiFi+AP

function with ASRock

USB+5V_2

TXN

TXP

GND2

PCIE_RST#

+3SVB

RXN

(see p.10 No. 27)

WiFi-802.11g or WiFi-802.11n

module, an easy-to-use wireless

local area network (WLAN)

adapter. It allows you to create a

wirelessenvironmentandenjoythe

convenience of wireless network

connectivity.

RXP

PexCLK

PexCLK#

GND1

D0+

D0-

USB+5V_1

PME#

If you don’t plan to use WiFi+AP functin on this motherboard, this header can be

used as a 4-Pin USB 2.0 header to support one USB 2.0 port. To connect the

4-Pin USB device cable to this header, please refer to

this picture for proper installation.

DeskExpress Hot Plug Detection

This header supports the Hot

Plug detection function for

ASRock DeskExpress.

IRTX

+5VSB

Hotplug#

Header

(5-pin IR1)

GND

IRRX

(see p.10 No. 22)

InternalAudio Connectors

(4-pin CD1)

This connector allows you

to receive stereo audio input

from sound sources such as

a CD-ROM, DVD-ROM, TV

tuner card, or MPEG card.

CD1

(CD1: see p.10 No. 25)

Front Panel Audio Header

(9-pin HD_AUDIO1)

This is an interface for front

panel audio cable that allows

convenient connection and

control of audio devices.

GND

PRESENCE#

MIC_RET

OUT_RET

(see p.10 No. 26)

OUT2_L

J_SENSE

OUT2_R

MIC2_R

MIC2_L

1. High Definition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select

Chipset Configuration. Set the Front Panel Control option from

[Auto] to [Enabled].

F. Enter Windows system. Click the icon on the lower right hand

taskbar to enter Realtek HD Audio Manager.

For Windows^®2000 / XP / XP 64-bit OS:

Click “Audio I/O”, select “Connector Settings”

, choose

“Disable front panel jack detection”, and save the change by

clicking “OK”.

For Windows^®Vista^TM/ Vista^TM64-bit OS:

Click the right-top “Folder” icon

, choose “Disable front

panel jack detection”, and save the change by clicking “OK”.

PLED+

System Panel Header

This header accommodates

several system front panel

functions.

PLED-

PWRBTN#

GND

(9-pin PANEL1)

(see p.10 No. 15)

DUMMY

RESET#

GND

HDLED-

HDLED+

Chassis Speaker Header

Please connect the chassis

speaker to this header.

SPEAKER

DUMMY

+5V

(4-pin SPEAKER 1)

(see p.10 No. 21)

Chassis Fan Connector

(3-pin CHA_FAN1)

Please connect a chassis fan

cable to this connector and

match the black wire to the

ground pin.

GND

+12V

CHA_FAN_SPEED

(see p.10 No. 12)

CPU Fan Connector

(4-pin CPU_FAN1)

Please connect a CPU fan cable

to this connector and match

the black wire to the ground pin.

4 3 2 1

GND

+12V

CPU_FAN_SPEED

(see p.10 No. 6)

FAN_SPEED_CONTROL

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function.

If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this

motherboard, please connect it to Pin 1-3.

Pin 1-3 Connected

3-Pin Fan Installation

ATX Power Connector

Please connect anATX power

supply to this connector.

(24-pin ATXPWR1)

(see p.10, No. 3)

Though this motherboard provides 24-pin ATX power connector,

it can still work if you adopt a traditional 20-pin ATX power supply.

To use the 20-pin ATX power supply, please plug your power

supply along with Pin 1 and Pin 13.

20-Pin ATX Power Supply Installation

ATX 12V Connector

Please connect an ATX 12V

(4-pin ATX12V1)

(see p.10 No. 2)

power supply to this connector.

HDMI_SPDIFHeader

(3-pin HDMI_SPDIF1)

(see p.10 No. 24)

HDMI_SPDIF header, providing

SPDIF audio output to HDMI VGA

card, allows the system to

connect HDMIDigital TV/

projector/LCD devices. Please

connect the HDMI_SPDIF

connector of HDMI VGA card to

this header.

GND

SPDIFOUT

+5V

HDMI_SPDIF Cable

Please connect the black end (A)

of HDMI_SPDIF cable to the

HDMI_SPDIF header on the

motherboard. Then connect the

white end (B or C) of

(Optional)

HDMI_SPDIF cable to the

HDMI_SPDIF connector of HDMI

VGA card.

A. black end

+5V

B. white end (2-pin)

C. white end (3-pin)

SPDIFOUT

blue

GND

black

GND

black

SPDIFOUT

GND

blue

black

2.9 HDMI_SPDIF Header Connection Guide

HDMI (High-Definition Multi-media Interface) is an all-digital audio/video

specification, which provides an interface between any compatible digital audio/

video source, such as a set-top box, DVD player, A/V receiver and a compatible

digital audio or video monitor, such as a digital television (DTV). A complete HDMI

system requires a HDMI VGA card and a HDMI ready motherboard with a

HDMI_SPDIF header. This motherboard is equipped with a HDMI_SPDIF header,

which provides SPDIF audio output to HDMI VGA card, allows the system to

connect HDMI Digital TV/projector/LCD devices. To use HDMI function on this

motherboard, please carefully follow the below steps.

•

Step 1. Install the HDMI VGA card to the PCI Express Graphics slot on this

motherboard. For the proper installation of HDMI VGA card, please refer

to the installation guide on page 18.

Step 2. Connect the black end (A) of HDMI_SPDIF cable to the

HDMI_SPDIF header (HDMI_SPDIF1, yellow, see page 10, No.

24) on the motherboard.

Make sure to correctly connect the HDMI_SPDIF cable to the motherboard and the

HDMI VGA card according to the same pin definition. For the pin definition of

HDMI_SPDIF header and HDMI_SPDIF cable connectors, please refer to page 23.

For the pin definition of HDMI_SPDIF connectors on HDMI VGA card, please refer to

the user manual of HDMI VGA card vendor. Incorrect connection may cause

permanent damage to this motherboard and the HDMI VGA card.

Step 3. Connect the white end (B or C) of HDMI_SPDIF cable to the HDMI_SPDIF

connector of HDMI VGA card. (There are two white ends (2-pin and 3-pin)

on HDMI_SPDIF cable. Please choose the appropriate white end according

to the HDMI_SPDIF connector of the HDMI VGA card you install.

white end

(2-pin) (B)

white end

(3-pin) (C)

Please do not connect the white end of HDMI_SPDIF cable to the wrong connector

of HDMI VGA card or other VGA card. Otherwise, the motherboard and the

VGA card may be damaged. For example, this picture shows the wrong

example of connecting HDMI_SPDIF cable to the fan connector of PCI

Express VGA card. Please refer to the VGA card user manual for

connector usage in advance.

Step 4. Connect the HDMI output connector on HDMI VGA card to

HDMI device, such as HDTV. Please refer to the user manual

of HDTV and HDMI VGA card vendor for detailed connection

procedures.

Step 5. Install HDMI VGA card driver to your system.

2.10 SA

Before installing SATAII hard disk to your computer, please carefully read below

SATAII hard disk setup guide. Some default setting of SATAII hard disks may not

be at SATAII mode, which operate with the best performance. In order to enable

SATAII function, please follow the below instruction with different vendors to

correctly adjust your SATAII hard disk to SATAII mode in advance; otherwise, your

SATAII hard disk may fail to run at SATAII mode.

Western Digital

If pin 5 and pin 6 are shorted, SATA 1.5Gb/s will be enabled.

On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the

jumpers from pin 5 and pin 6.

SAMSUNG

If pin 3 and pin 4 are shorted, SATA 1.5Gb/s will be enabled.

On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the

jumpers from pin 3 and pin 4.

HITACHI

Please use the Feature Tool, a DOS-bootable tool, for changing various ATA

features. Please visit HITACHI’s website for details:

http://www.hitachigst.com/hdd/support/download.htm

The above examples are just for your reference. For different SATAII hard

disk products of different vendors, the jumper pin setting methods may not

be the same. Please visit the vendors’ website for the updates.

2.11

(

)

(

)

Installation

This motherboard adopts Intel^®ICH7 south bridge chipset that supports Serial ATA

(SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks on

this motherboard for internal storage devices. This section will guide you to install the

SATA / SATAII hard disks.

STEP1: Install the SATA / SATAII hard disks into the drive bays of your chassis.

STEP2: Connect the SATA power cable to the SATA / SATAII hard disk.

STEP3: Connect one end of the SATA data cable to the motherboard’s SATAII

connector.

STEP4: Connect the other end of the SATA data cable to the SATA / SATAII hard

disk.

2.12 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive

first. Then, the drivers compatible to your system can be auto-detected and listed on

the support CD driver page. Please follow the order from up to bottom side to install

those required drivers. Therefore, the drivers you install can work properly.

2.13 Untied Overclocking Technology

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS

setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is

untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB

can operate under a more stable overclocking environment.

Please refer to the warning on page 7 for the possible overclocking risk

before you apply Untied Overclocking Technology.

Chapter 3 BIOS SETUP UTILITY

3.1 Introduction

This section explains how to use the BIOS SETUP UTILITY to configure your system.

The BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY. You may

run the BIOS SETUP UTILITY when you start up the computer. Please press <F2>

during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise,

POST will continue with its test routines.

If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by

pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system

chassis. You may also restart by turning the system off and then back on.

Because the BIOS software is constantly being updated, the

following BIOS setup screens and descriptions are for refer-

ence purpose only, and they may not exactly match what you

see on your screen.

3.1.1 BIOS Menu Bar

The top of the screen has a menu bar with the following selections:

Main

To set up the system time/date information

To set up the advanced BIOS features

Advanced

H/W Monitor To display current hardware status

Boot

To set up the default system device to locate and load the

Operating System

Security

Exit

To set up the security features

To exit the current screen or the BIOS SETUP UTILITY

Use < > key or < > key to choose among the selections on the menu bar,

and then press <Enter> to get into the sub screen.

3.1.2

Please check the following table for the function description of each navigation

key.

Navigation Key(s)

Function Description

Moves cursor left or right to select Screens

Moves cursor up or down to select items

To change option for the selected items

To bring up the selected screen

+ / -

<Enter>

<F1>

<F9>

<F10>

<ESC>

To display the General Help Screen

To load optimal default values for all the settings

To save changes and exit the BIOS SETUP UTILITY

To jump to the Exit Screen or exit the current screen

3.2 Main Screen

When you enter the BIOS SETUP UTILITY, the Main screen will appear and display

the system overview

BIOS SETUP UTILITY

Advanced

H/W Monitor

Boot

Security

Exit

Main

Use [Enter], [TAB]

or [SHIFT-TAB] to

select field.

System Overview

System Time

System Date

[14:00:09]

[Sat 04/26/2008]

Use [+] or [-] to

configure system Time.

BIOS Version

Processor Type

4Core1600-GLAN P1.00

Intel (R) CPU 3.40GHz

(64bit)

3400MHz

F64/4

Processor Speed

Microcode Update

Cache Size

Select Screen

Select Item

2048KB

Tab

F10

ESC

Change Field

Select Field

General Help

Load Defaults

Save and Exit

Exit

Total Memory

DDRII 1

DDRII 2

DDRII 3

DDRII 4

1024MB

1024MB/333MHz (DDRII667)

None

System Time [Hour:Minute:Second]

Use this item to specify the system time.

System Date [Day Month/Date/Year]

Use this item to specify the system date.

3.3 Advanced Screen

In this section, you may set the configurations for the following items: CPU

Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP

Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.

BIOS SETUP UTILITY

H/W Monitor Boot

Security

Exit

Main

Advanced

Configure CPU

Advanced Settings

WARNING : Setting wrong values in below sections

may cause system to malfunction.

CPU Configuration

Chipset Configuration

ACPI Configuration

IDE Configuration

PCIPnP Configuration

Floppy Configuration

SuperIO Configuration

USB Configuration

Select Screen

Select Item

Enter Go to Sub Screen

General Help

Load Defaults

Save and Exit

Exit

F10

ESC

Setting wrong values in this section may cause

the system to malfunction.

3.3.1CPU Configuration

BIOS SETUP UTILITY

Advanced

Select the over clock

mode.

CPU Configuration

Overclock Mode

[Auto]

[200]

[100]

CPU Frequency (MHz)

PCIE Frequency (MHz)

[Enabled]

[Auto]

Boot Failure Guard

Spread Spectrum

Ratio Status

Ratio Actual Value

Unlocked (Max:17, Min:12)

Select Screen

Select Item

[Disabled]

[Enabled]

[Disabled]

[Enabled]

[Auto]

Enhanced Halt State

Max CPUID Value Limit

CPU Thermal Throttling

No-Excute Memory Protection

Hyper Threading Technology

Intel (R) SpeedStep (tm) tech.

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Overclock Mode

Use this to select Overclock Mode. The default value is [Auto]. Configuration

options: [Auto] and [Manual].

CPU Frequency (MHz)

Use this option to adjust CPU frequency.

PCIE Frequency (MHz)

Use this option to adjust PCIE frequency.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Spread Spectrum

This item should always be [Auto] for better system stability.

Ratio Status

This is a read-only item, which displays whether the ratio status of this

motherboard is “Locked” or “Unlocked”. If it shows “Unlocked”, you will find an

item Ratio CMOS Setting appears to allow you changing the ratio value of

this motherboard.

Ratio Actual Value

This is a read-only item, which displays the ratio actual value of this

motherboard.

Enhance Halt State

All processors support the Halt State (C1). The C1 state is supported

through the native processor instructions HLT and MWAIT and requires no

hardware support from the chipset. In the C1 power state, the processor

maintains the context of the system caches.

Max CPUID Value Limit

For Prescott CPU only, some OSes (ex. NT4.0) cannot handle the function

with disable. This should be enabled in order to boot legacy OSes that

cannot support CPUs with extended CPUID functions.

Intel (R) Virtualization tech.

When this option is set to [Enabled], a VMM (Virtual Machine Architecture)

can utilize the additional hardware capabilities provided by Vanderpool

Technology. This option will be hidden if the installed CPU does not support

Intel (R) Virtualization Technology.

CPU Thermal Throttling

You may select [Enabled] to enable P4 CPU internal thermal control mecha-

nism to keep the CPU from overheated.

No-Excute Memory Protection

No-Execution (NX) Memory Protection Technology is an enhancement to the

IA-32 Intel Architecture. An IA-32 processor with “No Execute (NX) Memory

Protection” can prevent data pages from being used by malicious software to

execute code. This option will be hidden if the current CPU does not support

No-Excute Memory Protection.

Hyper Threading Technology

To enable this feature, it requires a computer system with an Intel Pentium^®4

processor that supports Hyper-Threading technology and an operating system

that includes optimization for this technology, such as Microsoft^®Windows^®

XP. Set to [Enabled] if using Microsoft^®Windows^®XP, or Linux kernel version

2.4.18 or higher. This option will be hidden if the installed CPU does not sup-

port Hyper-Threading technology.

Intel (R) SpeedStep(tm) tech.

Intel (R) SpeedStep(tm) tech. is Intel’s new power saving technology. Proces-

sor can switch between multiple frequency and voltage points to enable power

savings. The default value is [Auto]. Configuration options: [Auto], [Enabled]

and [Disabled]. If you install Windows^®XP and select [Auto], you need to set

the “Power Schemes” as “Portable/Laptop” to enable this function. If you

install Windows^®Vista^TMand want to enable this function, please set this item

to [Enabled]. This item will be hidden if the current CPU does not support Intel

(R) SpeedStep(tm) tech..

Please note that enabling this function may reduce CPU voltage and lead to system

stability or compatibility issue with some power supplies. Please set this item to

[Disable] if above issue occurs.

3.3.2

BIOS SETUP UTILITY

Advanced

Chipset Configuration

ENABLE: Allow

remapping of

overlapped PCI memory

above the total

physical memory.

Memory Remap Feature

DRAM Frequency

Flexibility Option

[Disabled]

[Auto]

[Disabled]

[Auto]

DRAM CAS# Latency

DRAM RAS# to CAS# Delay

DRAM RAS# Precharge

DRAM RAS# Activate to Precha

DISABLE: Do not allow

remapping of memory.

Primary Graphics Adapter

[PCI]

Select Screen

Select Item

OnBoard HD Audio

Front Panel

CD-In

[Auto]

[Enabled]

+ -

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

OnBoard Lan

DRAM Voltage

NB Core Voltage

VTT Voltage

[Auto]

Memory Remap Feature

Use this item to enable or disable memory remap feature. Configuration

options: [Enabled] and [Disabled]. The default value is [Disabled].

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s)

inserted and assigns appropriate frequency automatically. You may also

select other value as operating frequency: [266MHz (DDRII533)], [333MHz

(DDRII667)], [400MHz (DDRII800)].

Flexibility Option

The default value of this option is [Disabled]. It will allow better tolerance for

memory compatibility when it is set to [Enabled].

DRAM CAS# Latency

Use this item to adjust the means of memory accessing. Configuration

options are [6], [5], [4], [3] and [Auto].

DRAM RAS# to CAS# Delay

This controls the latency between the DRAM active command and the

read / write command. Configuration options: [Auto], [3 DRAM Clocks], [4

DRAM Clocks], [5 DRAM Clocks] and [6 DRAM Clocks].

DRAM RAS# Precharge

This controls the idle clocks after a precharge command is issued. Con-

figuration options: [Auto], [3 DRAM Clocks], [4 DRAM Clocks], [5 DRAM

Clocks] and [6 DRAM Clocks].

DRAM RAS# Activate to Precharge

This controls the number ofDRAM clocks for TRAS. Configuration options:

Configuration options: [Auto], [9 DRAM Clocks], [10 DRAM Clocks], [11

DRAM Clocks], [12 DRAM Clocks], [13 DRAM Clocks], [14 DRAM Clocks]

and [15 DRAM Clocks].

Primary Graphics Adapter

This allows you to select [PCI] or [PCI Express] as the boot graphic adapter

priority. The default value is [PCI].

OnBoard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If

you select [Auto], the onboard HD Audio will be disabled when PCI Sound

Card is plugged.

Front Panel

Select [Auto], [Enabled] or [Disabled] for the onboard HDAudio Front Panel.

OnBoard Lan

This allows you to enable or disable the “OnBoard Lan” feature.

DRAM Voltage

Use this to select DRAM Voltage. Configuration options: [Auto], [1.72V],

[1.81V], [1.86V], [1.90V], [1.95V], [1.99V], [2.04V] and [2.13V]. The default

value of this feature is [Auto].

NB Core Voltage

Use this to select Northbridge Core Voltage. Configuration options: [Auto],

[Low] and [High]. The default value of this feature is [Auto].

VTT Voltage

Use this to select VTTVoltage. Configuration options: [Auto], [Low] and [High].

The default value of this feature is [Auto].

3.3.3

BIOS SETUP UTILITY

Advanced

ACPI Configuration

Suspend To RAM

Select auto-detect or

disable the STR

feature.

[Auto]

[No]

Repost Video on STR Resume

[Power Off]

[Disabled]

Restore on AC/Power Loss

Ring-In Power On

PCI Devices Power On

PS / 2 Keyboard Power On

RTC Alarm Power On

Select Screen

Select Item

[Disabled]

ACPI HPET Table

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Suspend to RAM

Use this item to select whether to auto-detect or disable the Suspend-to-

RAM feature. Select [Auto] will enable this feature if the OS supports it. If

you set this item to [Disabled], the function “Repost Video on STR Resume”

will be hidden.

Repost Video on STR Resume

This feature allows you to repost video on STR resume. (STR refers to

suspend to RAM.)

Restore on AC/Power Loss

This allows you to set the power state after an unexpected AC/power

loss. If [Power Off] is selected, the AC/power remains off when the

power recovers. If [Power On] is selected, the AC/power resumes

and the system starts to boot up when the power recovers.

Ring-In Power On

Use this item to enable or disable Ring-In signals to turn on the system from

the power-soft-off mode.

PCI Devices Power On

Use this item to enable or disable PCI devices to turn on the system from the

power-soft-off mode.

PS/2 Keyboard Power On

Use this item to enable or disable PS/2 keyboard to turn on the system from

the power-soft-off mode.

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the

system.

ACPI HPET Table

Use this item to enable or disable ACPI HPET Table. The default value is

[Disabled]. Please set this option to [Enabled] if you plan to use this

motherboard to submit Windows^®Vista^TMcertification.

3.3.4IDE Configuration

BIOS SETUP UTILITY

Advanced

Set [Compatible]

when Legacy OS

IDE Configuration

(MS-DOS, Win NT)

is used.

[Enhanced]

ATA/IDE Configuration

SATAII

IDE1 Master

IDE2 Slave

[Hard Disk]

Set [Enhanced]

when Native OS

(Win 2000/XP)

is used.

[Not Detected]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

Exit

F10

ESC

ATA/IDE Configuration

Please select [Compatible] when you install legacy OS (Windows^®NT). If

native OS (Windows^®2000 / XP) is installed, please select [Enhanced].

When [Compatible] is selected

Combined Option

It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1,

SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA 3,

IDE 1], then SATAII_2 (Port1), SATAII_4 (Port3) will not work. Likewise, if it is

set to [IDE 1, SATA 2, SATA 4], then SATAII_1 (Port0), SATAII_3 (Port2) will

not work.

Because Intel^®ICH7 south bridge only supports four IDE devices

under legacy OS (Windows^®NT), you have to choose [SATA 1, SATA

2, SATA 3, SATA 4], [SATA1, SATA 3, IDE 1], or [IDE 1, SATA2, SATA4]

when the installed device is used with legacy OS.

[SATA1, SATA2,

SATA3, SATA4]

[SATA1, SATA3,

IDE 1]

[IDE 1, SATA 2,

SATA 4]

SATAII_1 (Port0),

SATAII_2 (Port1)

Master

Slave

SATAII_1 (Port0)

SATAII_3 (Port2)

SATAII_2 (Port1)

SATAII_4 (Port3)

SATAII_3 (Port2),

SATAII_4 (Port3)

IDE Device Configuration

You may set the IDE configuration for the device that you specify. We will

use the “Primary IDE Master” as the example in the following instruction.

BIOS SETUP UTILITY

Advanced

Primary IDE Master

Select the type

of device connected

to the system.

Device

Vendor

Size

:Hard Disk

:ST340014A

:40.0 GB

LBA Mode

Block Mode

PIO Mode

Async DMA

Ultra DMA

S.M.A.R.T.

:Supported

:16Sectors

:MultiWord DMA-2

:Ultra DMA-5

:Supported

Type

[Auto]

[Disabled]

[Enabled]

Select Screen

Select Item

LBA/Large Mode

Block (Multi-Sector Transfer)

PIO Mode

DMA Mode

S . M . A . R . T .

32Bit Data Transfer

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

TYPE

Use this item to configure the type of the IDE device that you specify.

Configuration options: [Not Installed], [Auto], [CD/DVD], and [ARMD].

[Not Installed]: Select [Not Installed] to disable the use of IDE device.

[Auto]: Select [Auto] to automatically detect the hard disk drive.

After selecting the hard disk information into BIOS, use a disk

utility, such as FDISK, to partition and format the new IDE hard

disk drives. This is necessary so that you can write or read

data from the hard disk. Make sure to set the partition of the

Primary IDE hard disk drives to active.

[CD/DVD]: This is used for IDE CD/DVD drives.

[ARMD]: This is used for IDE ARMD (ATAPI Removable Media Device),

such as MO.

LBA/Large Mode

Use this item to select the LBA/Large mode for a hard disk > 512 MB under

DOS and Windows; for Netware and UNIX user, select [Disabled] to

disable the LBA/Large mode.

Block (Multi-Sector Transfer)

The default value of this item is [Auto]. If this feature is enabled, it will

enhance hard disk performance by reading or writing more data during

each transfer.

PIO Mode

Use this item to set the PIO mode to enhance hard disk performance by

optimizing the hard disk timing.

DMA Mode

DMAcapability allows the improved transfer-speed and data-integrity for com-

patible IDE devices.

S.M.A.R.T.

Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,

and Reporting Technology) feature. Configuration options: [Disabled], [Auto],

[Enabled].

32-Bit Data Transfer

Use this item to enable 32-bit access to maximize the IDE hard disk data

transfer rate.

3.3.5PCIPnP Configuration

BIOS SETUP UTILITY

Advanced

Value in units of PCI

Advanced PCI / PnP Settings

clocks for PCI device

latency timer

PCI Latency Timer

PCI IDE BusMaster

[32]

[Enabled]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

Exit

F10

ESC

PCI Latency Timer

The default value is 32. It is recommended to keep the default value unless

the installed PCI expansion cards’ specifications require other settings.

PCI IDE BusMaster

Use this item to enable or disable the PCI IDE BusMaster feature.

3.3.6

In this section, you may configure the type of your floppy drive.

BIOS SETUP UTILITY

Advanced

Floppy Configuration

Floppy

Select the type of

floppy drive

connected to the

system.

[1.44 MB 3¹"]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

F10

ESC Exit

3.3.7 Super IO Configuration

BIOS SETUP UTILITY

Advanced

Configure Win627EHF Super IO Chipset

Allow BIOS to Enable

or Disable Floppy

Controller.

[Enabled]

[3F8 / IRQ4]

[Disabled]

[378]

OnBoard Floppy Controller

Serial Port Address

Infrared Port Address

Parallel Port Address

Parallel Port Mode

EPP Version

[ECP + EPP]

[1.9]

ECP Mode DMA Channel

Parallel Port IRQ

[DMA3]

[IRQ7]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

F10

ESC Exit

OnBoard Floppy Controller

Use this item to enable or disable floppy drive controller.

Serial Port Address

Use this item to set the address for the onboard serial port or disable it.

Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],

[2E8 / IRQ3].

Infrared Port Address

Use this item to set the address for the onboard infrared port or disable it.

Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3]. If you plan to

use ASRock DeskExpress on this motherboard, please keep this item on

[Disabled] option.

Parallel Port Address

Use this item to set the address for the onboard parallel port or disable it.

Configuration options: [Disabled], [378], and [278].

Parallel Port Mode

Use this item to set the operation mode of the parallel port. The default

value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP

version in the following item, “EPP Version”. Configuration options:

[Normal], [Bi-Directional], and [ECP+EPP].

EPP Version

Use this item to set the EPP version. Configuration options: [1.9]

and [1.7].

ECP Mode DMA Channel

Use this item to set the ECP mode DMA channel. Configuration

options: [DMA0], [DMA1], and [DMA3].

Parallel Port IRQ

Use this item to set the IRQ for the parallel port. Configuration options:

[IRQ5] and [IRQ7].

3.3.8

BIOS SETUP UTILITY

Advanced

USB Configuration

To enable or disable

the onboard USB

controllers.

[Enabled]

USB Controller

USB 2.0 Support

Legacy USB Support

[Enabled]

[BIOS Setup Only]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

F10

ESC Exit

USB Controller

Use this item to enable or disable the use of USB controller.

USB 2.0 Support

Use this item to enable or disable the USB 2.0 support.

Legacy USB Support

Use this option to select legacy support for USB devices. There are four

configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup Only].

The default value is [BIOS Setup Only]. Please refer to below descriptions

for the details of these four options:

[Enabled] - Enables support for legacy USB.

[Auto] - Enables legacy support if USB devices are connected.

[Disabled] - USB devices are not allowed to use under legacy OS and BIOS

setup when [Disabled] is selected. If you have USB compatibility issue, it is

recommended to select [Disabled] to enter OS.

[BIOS Setup Only] - USB devices are allowed to use only under BIOS setup

and Windows / Linux OS.

3.4 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system,

including the parameters of the CPU temperature, motherboard temperature, CPU fan

speed, chassis fan speed, and the critical voltage.

BIOS SETUP UTILITY

Boot

Security

Exit

Main

Advanced

H/W Monitor

Enable/Disable

CPU Quiet Fan

Function.

Hardware Health Event Monitoring

CPU Temperature

M / B Temperature

37 C / 98 F

31 C / 87 F

CPU Fan Speed

Chassis Fan Speed

3400 RPM

N / A

Vcore

1.629V

3.306V

5.067V

11.890V

3.30V

5.00V

12.00V

Select Screen

Select Item

F10

General Help

Load Defaults

Save and Exit

CPU Quiet Fan

[Disabled]

ESC Exit

CPU Quiet Fan

This item allows you to identify the temperature of CPU fan. If you set this

option as [Disabled], the CPU fan will operate in full speed. If you set this

option as [Enabled], you will find the items “Target CPU Temperature” and

“Target Fan Speed” appear to allow you adjusting them. The default value is

[Disabled]. You are allowed to enable this function only when you install 4-pin

CPU fan.

Target CPU Temperature

The target temperature will be between 45 C/113 F and 65 C/149 F. The

default value is [50 C/122 F].

Target Fan Speed

Use this option to set the target fan speed. You can freely adjust the

target fan speed according to the target CPU temperature that you

choose. Configuration options: [Fast], [Middle] and [Slow].

3.5

In this section, it will display the available devices on your system for you to config-

ure the boot settings and the boot priority.

BIOS SETUP UTILITY

Main

Advanced

H/W Monitor

Boot

Security

Exit

Boot Settings

Configure Settings

during System Boot.

Boot Settings Configuration

[1st Floppy Device]

1st Boot Device

2nd Boot Device

3rd Boot Device

4th Boot Device

Hard Disk Drives

Removable Drives

CD/DVD Drives

[HDD: PM - HDS722580VL]

[CD / DVD: 3S - CD - ROM C]

[USB]

Select Screen

Select Item

Enter Go to Sub Screen

F10

General Help

Load Defaults

Save and Exit

ESC Exit

3.5.1

BIOS SETUP UTILITY

Boot

Boot Settings Configuration

To enable or disable the

boot from onboard LAN

feature.

Boot From Onboard LAN

Bootup Num-Lock

[Disabled]

[On]

Select Screen

Select Item

+ -

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Boot From Onboard LAN

Use this item to enable or disable the Boot From Onboard LAN feature.

Boot Up Num-Lock

If this item is set to [On], it will automatically activate the Numeric Lock

function after boot-up.

3.6 Security Screen

In this section, you may set or change the supervisor/user password for the system.

For the user password, you may also clear it.

BIOS SETUP UTILITY

Main

Advanced

H/W Monitor

Boot

Security

Exit

Security Settings

Install or Change the

password.

Supervisor Password : Not Installed

User Password : Not Installed

Change Supervisor Password

Change User Password

Select Screen

Select Item

Enter Change

F10

ESC

General Help

Load Defaults

Save and Exit

Exit

3.7

BIOS SETUP UTILITY

H/W Monitro Boot

Main

Advanced

Security

Exit

Exit Options

Exit system setup

after saving the

changes.

Save Changes and Exit

Discard Changes and Exit

Discard Changes

F10 key can be used

for this operation.

Load Optimal Defaults

Select Screen

Select Item

Enter Go to Sub Screen

F10

ESC

General Help

Load Defaults

Save and Exit

Exit

Save Changes and Exit

When you select this option, it will pop-out the following message, “Save

configuration changes and exit setup?” Select [OK] to save the changes

and exit the BIOS SETUP UTILITY.

Discard Changes and Exit

When you select this option, it will pop-out the following message, “Dis-

card changes and exit setup?” Select [OK] to exit the BIOS SETUP UTILITY

without saving any changes.

Discard Changes

When you select this option, it will pop-out the following message, “Dis-

card changes?” Select [OK] to discard all changes.

Load Optimal Defaults

When you select this option, it will pop-out the following message, “Load

optimal defaults?” Select [OK] to load the default values for all the setup

configurations.

Chapter 4 Software Support

4.1 Install Operating System

This motherboard supports various Microsoft^®Windows^®operating systems: 2000 /

XP / XP 64-bit / Vista^TM/ Vista^TM64-bit. Because motherboard settings and hardware

options vary, use the setup procedures in this chapter for general reference only.

Refer to your OS documentation for more information.

4.2 Support CD Information

The Support CD that came with the motherboard contains necessary drivers and

useful utilities that enhance the motherboard features.

4.2.1 Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD

automatically displays the Main Menu if “AUTORUN” is enabled in your computer.

If the Main Menu did not appear automatically, locate and double click on the

file “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.

4.2.2 Drivers Menu

The Drivers Menu shows the available devices drivers if the system detects

installed devices. Please install the necessary drivers to activate the devices.

4.2.3 Utilities Menu

The Utilities Menu shows the applications software that the motherboard

supports. Click on a specific item then follow the installation wizard to install it.

4.2.4 Contact Information

If you need to contact ASRock or want to know more about ASRock, welcome

to visit ASRock’s website at http://www.asrock.com; or you may contact your

dealer for further information.

Grandstream Networks Cordless Telephone 418 02005 10 User Manual
GE 28115 Series User Manual
FUNAI DVC860D User Manual
Frigidaire FGGC3645KB User Manual
Fisher Paykel FREESTANDING COOKER OR120 User Manual
Eizo FlexScan EcoView User Manual
Dell Computer Hardware 9150 User Manual
Dacor Cooktop RR30NIS User Manual
Crestron electronic Isys G Series TPS 12G QM User Manual
BT Relate 2100 User Manual