Grandstream Networks Cordless Telephone 418 02005 10 User Manual

GXP2020 Enterprise SIP Phone Quick Installation Guide  
418-02005-10  
Part Number:  
Document Version Number: 1.0  
Grandstream Networks, Inc., 1297 Beacon St., 2nd Flr, Brookline, MA 02446 USA  
Tel: (617) 566-9300, FAX: (617) 249-1987  
Last updated on April 1, 2008  
1
GXP2020 6-line SIP Enterprise Phone Quick Installation  
Guide  
WARNING:  
Please DO NOT power cycle the GXP2020 when LED lights are flashing during  
system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to  
malfunction.  
WARNING:  
Use only the power adapter included in the GXP2020 package. Using an alternative  
non-qualified power adapter may possibly damage the unit.  
Overview  
GXP2020 features 6 lines, each with an individual SIP account and offers a large graphical LCD  
display, four (4) XML programmable soft keys, and seven (7) programmable hard keys. It offers  
intuitive user interfaces, 5-way conferencing, 2 headset jacks, and three (3) adjustable positioning  
angles. The GXP2020 also offers dual 10/100Mbps auto-sensing Ethernet ports with integrated PoE,  
secure central configuration with AES Encryption, superior audio quality (using G.722 wide-band  
codec) and excellent manageability. The GXP series is fully compatible and interoperable with most  
SIP end-user devices, IPPBX and Softswitches.  
Equipment Packaging - Unpack and check all accessories  
The GXP2020 phone package contains  
1. One GXP2020 Main Case  
2. One Handset  
3. One Phone Cord  
4. One Universal Power Adaptor  
5. One Ethernet Cable  
6. One High Phone Stand  
7. One Low Phone Stand  
8. Two Wall Mount Spacers  
Connect the GXP2020 Enterprise IP Phone  
Please use the equipment included in the packaging. Using any other power source may damage the  
product.  
1. Connect the handset and main phone case with the phone cord.  
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the  
router) using the Ethernet cable.  
3. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an  
electrical outlet.  
4. The LCD will display provisioning or firmware upgrade information. Before continuing, wait for the  
date/time display to show up.  
5. Using the phone embedded web server or keypad configuration menu, you can further configure  
the phone using either a static IP or DHCP.  
Grandstream Networks, Inc., 1297 Beacon St., 2nd Flr, Brookline, MA 02446 USA  
Tel: (617) 566-9300, FAX: (617) 249-1987  
Last updated on April 1, 2008  
2
Figure 1: Connectors on the bottom of the GXP2020  
Wall Mount  
GXP2020 can be wall mounted. For proper wall mounting please place the two wall-mount spacers  
into the proper holes on the bottom of the GXP-2020 as show below:  
Figure 2: Attach the wall mount spacers to the GXP2020  
To position the phone on the wall, place two fixed hangers on the wall, hang the back of the phone on  
the fixed hangers.  
Figure 3: Location of the fixed hangers on GXP2020  
To use the handset, pull out the tab (extension downward) from the handset cradle, rotate the tab and  
plug it back into the slot with the extension up to hold the handset.  
Grandstream Networks, Inc., 1297 Beacon St., 2nd Flr, Brookline, MA 02446 USA  
Tel: (617) 566-9300, FAX: (617) 249-1987  
Last updated on April 1, 2008  
3
Figure 4: Placing tab for mounting phone to wall  
Configuring the GXP2020 using a Web Browser  
1. If DHCP is enabled in your network, the phone’s IP address will be displayed.  
2. Type the phone’s IP address in your PC browser.  
3. The default administrator password is “admin”; the default end-user password is “123”.  
To configure the phone via the web browser, you will need the following information:  
1. IP address, subnet mask and gateway IP if using static IP.  
2. SIP server and/or Outbound Proxy FQDN or IP address.  
3. User subscriber information: User ID, Authentication ID, Password (provided by your VoIP  
service provider).  
4. GXP2020 supports “Plug-n-Call” if your ITSP (Internet Telephony Service Provider) provides this  
automatic provisioning service. Ensure the phone has an internet connection (either DHCP or static IP  
in your internet ready network), then power up the phone.  
5. Please contact your ITSP for additional settings that may be necessary to configure the phone.  
Configure the GXP2020 using the Keypad  
1. Make sure the phone is idle.  
2. Press the “OK” button to enter the keypad MENU to configure the phone.  
3. Follow MENU options to configure the basic features of the phone – for example: the IP address  
if using a static IP. For details, please check GXP Series User Manual.  
Using the Keypad  
1.  
2.  
3.  
4.  
5.  
To enter the MENU, press round MENU button.  
Navigate the menu by using the UP/DOWN and LEFT/RIGHT.  
Press the round MENU button to confirm a menu selection.  
To delete an entry by pressing the MUTE button.  
The phone automatically exits MENU mode with an incoming call, the phone is off-hook or the  
MENU mode if left idle for 20 seconds.  
GXP2020 Key Pad Configuration Menu  
Call History  
Status  
Displays histories of incoming, dialed and missed calls.  
Displays the network status, account statuses, software version  
and MAC-address of the phone.  
Phone Book  
Displays the phonebook.  
Instant Messages  
Goes to Instant Messages if the Presence is supported by the  
service provider or PBX.  
Direct IP call  
Displays the IP-call options menu.  
Grandstream Networks, Inc., 1297 Beacon St., 2nd Flr, Brookline, MA 02446 USA  
Tel: (617) 566-9300, FAX: (617) 249-1987  
Last updated on April 1, 2008  
4
Preference  
Config  
Displays user preference sub-menu, such as ring tone, ring volume,  
customized XML idle screen or logo.  
Display configuration sub-menu, such as Network, SIP  
account, audio codec, firmware upgrade path and method,  
and Factory Reset function, etc.  
Factory Functions  
Reboot  
Extra diagnostic tools reside here.  
Makes the phone reboot itself.  
Exit from this menu.  
Exit  
Grandstream Networks, Inc. Corporate Headquarters  
1297 Beacon Street, 2nd Floor,  
Brookline, MA USA 02446  
Tel : +1 (617) 566 – 9300  
Fax: +1 (617) 247 – 1987  
About Grandstream Networks  
Grandstream Networks, Inc. is an award-winning designer and manufacturer of next generation IP voice &  
video products for broadband networks. Grandstream’s products deliver superb sound and picture quality, rich  
telephony features, full compliance with industry standards, and broad interoperability with most service  
providers and 3rd party SIP based VoIP products. Grandstream is consistently recognized in the VoIP industry  
for their innovation, affordability and superior value in their products. Grandstream Networks is a private  
company headquartered in Brookline, MA with offices in Los Angeles, Dallas and China. For more information,  
Declaration of Conformity for GXP2020  
Grandstream Networks, Inc., 1297 Beacon St., 2nd Flr, Brookline, MA 02446 USA  
Tel: (617) 566-9300, FAX: (617) 249-1987  
Last updated on April 1, 2008  
5
Harmonised standards applied...  
andere Art und Weise (hierzu verwendete  
Standards/Spezifikationen) ...  
Other means of proving conformity with the  
essential requirements (standards/specifications  
used)...  
Schutzanforderungen in Bezug auf die elektromagn. Verträglichkeit § 3 (1) 2, Artikel 3 (1) b))  
Protection requirements concerning electromagnetic compatibility § 3(1)(2), (Article 3(1)(b))  
angewendete harmonisierte Normen  
Harmonised standards applied...  
inhaltung der grundlegenden  
Anforderungen auf andere Art und Weise  
(hierzu verwendete  
EN 55022: 1998+A1:2001+A2:2003 Class B  
EN 55024: 1998+A1:2001+A2:2003  
EN 61000-3-2:2000+A2:2005  
tandards/Spezifikationen)...  
ther means of proving conformity with the  
sential requirements  
EN 61000-3-3-:1995+A1:2001+A2:2005  
standards/specifications used)...  
Maßnahmen zur effizienten Nutzung des Funkfrequenzspektrums  
Measures for the efficient use of the radio frequency spectrum  
Non-applicable  
Luftschnittstelle bei § 3 Funkanlagen gemäß (2) (Artikel 3(2))  
Air interface of the radio systems pursuant to § 3(2) (Article 3(2))  
angewendete harmonisierte  
Normen Einhaltung der grundlegenden Anforderungen auf  
Harmonised standards applied  
andere Art und Weise (hierzu verwendete Standards/  
Schnittstellenbeschreibungen)...  
Non-applicable  
her means of proving conformity with the essential  
requirements (standards/interface specifications used)...  
Anschrift/Address  
+ TK-Nr./Phone, fax, e-mail  
Tel: +1 (617) 566-9300 x 804  
Fax: +1 (617) 249-1987  
Grandstream Networks, Inc.  
1297 Beacon St 2nd Flr  
Brookline, MA 02446 USA  
Ort, Datum  
Place & date of issue  
Name und Unterschrift  
Name and signature  
Brookline, MA, USA August 20, 2007  
Bruce G. MacAloney, Vice President  
Grandstream Networks, Inc., 1297 Beacon St., 2nd Flr, Brookline, MA 02446 USA  
Tel: (617) 566-9300, FAX: (617) 249-1987  
Last updated on April 1, 2008  
7

Hitachi 31KX39K, 31GX31B, 31DX21B, 31DX11B User Manual
Hasty Bake Legacy User Manual
Fisher Paykel CT280 User Manual
Dell Computer Monitor U2211H User Manual
Cypress Perform CY7C146 User Manual
Brinkmann 815 3680 S User Manual
Audiovox VOH1012 User Manual
AT T CL83301 User Manual
ATI Technologies X1950 PRO User Manual
ASRock Computer Hardware 775DUAL 880PRO User Manual