Panasonic Stereo System SC PMX9DB User Manual

Start wireless network settings  
Preparation  
1 Place SC-PMX9DB close to the wireless network router as  
CD Stereo System  
possible and then point the antenna on the rear of the main  
unit up as shown in the figure.  
≥ Do not tilting the antenna forward or backwards when it is pointing up.  
Model No. SC-PMX9DB  
2 Connect the AC mains lead while the LAN cable is  
disconnected.  
VQC9510  
3 Turn this system on.  
Wi-Fi® connection guide  
You can wirelessly stream music from an iOS device, an Android™ device or a  
Mac/PC to SC-PMX9DB’s speakers. To use this music-streaming feature,  
SC-PMX9DB must join the same 2.4 GHz wireless network as the compatible  
device through the wireless network router (access point).  
4 Follow the chart below to choose the network setting method.  
≥ If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced  
setting, refer to “Method 4” in the operating instructions.  
Does your wireless network router support  
TM  
WPS (Wi-Fi Protected Setup )?  
≥For information on how to connect with a LAN cable, refer to “Wired LAN connection” in  
the Operating Instructions.  
Yes  
No / Do not know  
*1  
Wireless network  
router  
SC-PMX9DB  
iOS device , Android device  
or Mac/PC  
Are you using an iPod touch/iPhone/iPad?  
Is the iOS version 5.0 or later?  
*1: Refer to the Operating Instructions for the compatibility.  
Screen images used in this sheet : iPhone 4S, iOS 6.0.1  
Yes  
No  
Method 1  
Method 2  
Method 3  
The following explanations are based on an iPhone.  
Start “Panasonic Stereo System  
Network Setup” on your smartphone  
and follow the indications.  
1
Press [SETUP] on the remote  
control repeatedly to select  
“Net Setup” and then press [OK].  
3
Press [SETUP] on the remote  
control repeatedly to select  
“Net Setup” and then press [OK].  
“With iPod” is indicated on the display.  
Disconnect iPod/iPhone/iPad  
connected to the main unit.  
4
1
2
2 “With iPod” is indicated on the display.  
Press [SETUP] on the remote  
∫ Note for the iOS version  
Connect the iPhone to your  
home wireless network.  
After step 3  
You can make the wireless  
network settings with the app,  
“Panasonic Stereo System  
Network Setup” (for free).  
If you’re using an Android device,  
download the app at Google  
Play™. If you’re using an iPod  
touch/iPhone/iPad, download it at  
the App Store.  
control repeatedly to select “WPS  
Push” and then press [OK].  
“WPS” flashes on the display.  
1 Enter the password for the home  
wireless network to which the iOS  
device is connected.  
2 When a message instructing you  
to connect the iOS device to this  
system is displayed, press the  
home button.  
3 On the Wi-Fi network selection  
screen in “Settings”, select  
“00 Setup _ _ _ _ _ _”.  
Unlock your iPhone and then  
press [OK] on the remote control.  
5
6
A message will pop-up on the  
iPhone. Allow the iPhone to share  
the wireless network settings.  
Connect the iPhone to the  
main unit.  
Choose one of the following  
connections.  
3
Lightning connector compatible iPod  
touch/iPhone:  
Press the WPS button on the  
wireless network router.  
3
Preparation  
≥Connect your smartphone to  
your home wireless network.  
≥Check the password for your  
home wireless network.  
2
*
The settings are completed  
when “Success” is displayed  
and “ ” is indicated on the  
display.  
7
8
4 When a message indicating the  
completion of the connection to  
this system is displayed, restart  
the app.  
The settings are completed when  
Press [SETUP] on the remote  
control repeatedly to select  
“Net Setup” and then press [OK].  
“With iPod” is indicated on the display.  
“Success” is displayed and “  
indicated on the display.  
” is  
1
iPod touch/iPhone/iPad with  
iOS 5.0 or later:  
Press [OK] on the remote  
control to exit.  
Press [SETUP] on the remote  
2
control repeatedly to select  
“Manual” and then press [OK].  
iPad  
5 When a message indicating the  
completion of the Wi-Fi setup of  
this system is displayed, close the  
app, and then check the operation  
of AirPlay, etc.  
Press [OK] on the remote  
control to exit.  
4
Dedicated cable supplied with the iOS  
device  
*2 : The marking may differ.  
1
2
Connect the iPhone to your home wireless network.  
Using AirPlay  
The following explanations are based on an  
iPhone.  
≥ AirPlay, the AirPlay logo, iPad, iPhone, and iPod touch are  
trademarks of Apple Inc., registered in the U.S. and other countries.  
≥ App Store is a service mark of Apple Inc.  
≥ Android and Google Play are trademarks of Google Inc.  
≥ The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi  
Alliance.  
≥ The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.  
≥ “Wi-Fi” and “Wi-Fi Protected Setup” are marks or registered marks  
of the Wi-Fi Alliance.  
Your home wireless  
network name  
(SSID)*3  
“Settings”  
Turn on  
“Wi-Fi”  
*3 : You may be prompted for the password. Enter the password of your home wireless network.  
≥ All other trademarks are trademarks of their respective owners.  
Select “Panasonic PMX9 _ _ _ _ _ _” from the AirPlay  
icon and start play.  
“Panasonic PMX9 _ _ _ _ _ _”  
Play starts.  
(with a slight delay)  
“Music”  
 
 

Radio Shack 3Com Bigpicture User Manual
Plantronics Bluetooth Headset 925 User Manual
Optimus CD 8250 User Manual
Nikon MH 22 User Manual
Lochinvar 2 User Manual
Kenwood KDC 319 User Manual
JVC KV M70 User Manual
JVC KD SH1000J User Manual
JVC KD R320 User Manual
JVC KD A625 User Manual