Toshiba Estudio 60f User Manual

Networking Documents.  
Overview of functions  
M select functions  
OK confirm  
selec-  
C return to pre-  
vious menu  
tion  
K colour copy  
/ choose between op-  
tions, move the cur-  
sor on the display  
Z scan to PC  
i help  
X stop, re-  
turn  
to  
stand-by  
mode  
K black-and-white copy  
L redial  
W send an SMS; the  
lamp next to the key  
will flash when mes-  
sages are received  
O contrast  
& broadcast – send a fax  
or SMS to several re-  
cipients  
v If this symbol flash-  
es please read the  
display  
f%F resolution  
Y start fax transmission  
a call up directory  
entries  
keyboard for text input  
keypad for numbers  
Contents  
Safety instructions ..........................5  
SMS..................................................20  
Send SMS ................................................................ 20  
Receiving an SMS ................................................... 20  
Installation........................................6  
Unpacking ................................................................. 6  
Set-up........................................................................ 6  
Loading paper ........................................................... 7  
Connections .............................................................. 7  
Additional devices..................................................... 7  
Power supply............................................................. 7  
Country selection ...................................................... 8  
Inserting cartridges.................................................... 8  
Cartridge alignment................................................... 9  
Your name and number............................................. 9  
Time and date ........................................................... 9  
PC connection........................................................... 9  
Software installation.................................................. 9  
Advanced settings..........................21  
Settings list............................................................... 21  
Fax settings.............................................................. 21  
SMS settings............................................................ 21  
Scan settings............................................................ 21  
Printer settings ......................................................... 22  
Hints & tips......................................23  
Change cartridges.................................................... 23  
Cartridge capacity.................................................... 24  
Logs.......................................................................... 24  
Commands............................................................... 24  
Lock.......................................................................... 25  
Care and maintenance ............................................. 25  
Settings ...........................................11  
Date and time........................................................... 11  
Your number and name............................................ 11  
Network type (PABX)................................................ 11  
Country and language.............................................. 11  
Additional telephone ................................................ 11  
Annex...............................................27  
Functions list ............................................................ 27  
Technical settings..................................................... 28  
Technical data .......................................................... 28  
Disclaimer notice...................................................... 28  
DECLARATION OF CONFORMITY (Doc)................. 29  
Index......................................................................... 31  
Directory..........................................12  
Add name................................................................. 12  
Add list ..................................................................... 12  
Print.......................................................................... 12  
Cancel ...................................................................... 12  
Modify....................................................................... 12  
Transfer to a PC........................................................ 12  
Fax ...................................................13  
Sending a fax Y ...................................................... 13  
Directory a ....................................................... 13  
Redial L ................................................................ 14  
Broadcast & .......................................................... 14  
Resolution f%F ................................................. 14  
Contrast O .............................................................. 14  
Receiving faxes ........................................................ 14  
Fax answering device............................................... 14  
Send report............................................................... 14  
Delayed transmission............................................... 15  
Polling....................................................................... 15  
Additional telephone ................................................ 15  
Copy.................................................16  
Inserting a document ............................................... 16  
Standard copy K .................................................... 16  
“Creative” copy K ................................................... 16  
Scan to PC ......................................18  
Inserting a document ............................................... 18  
Open the scan window Z ....................................... 18  
4
Safety instructions  
Please read and follow all warning notices and instruc-  
tions.  
The e-STUDIO60F should be installed on a level and  
stable surface. The surface should be smooth and hori-  
zontal. The machine may be damaged if it falls and may  
cause serious injury, especially to small children. Place  
the e-STUDIO60F at least 10 cm away from other elec-  
trical devices and objects.  
Do not place the e-STUDIO60F in direct sunlight. Do  
not place it near to a radiator, heater, radio, television  
or air conditioning unit. Do not allow it to come into  
contact with dust, water or chemicals.  
Make sure that air can circulate freely around the  
e-STUDIO60F. Do not operate the e-STUDIO60F in  
enclosed spaces such as boxes, cupboards, cabinets  
etc. Do not cover the e-STUDIO60F. Do not place the  
e-STUDIO60F on soft surfaces such as beds, duvets,  
cushions, sofas or carpets as there is a risk of over-  
heating and fire.  
Only use the power supply included with the product.  
Using an unauthorised power supply may damage the  
e-STUDIO60F.  
Do not touch telephone wires or network cables where  
the insulation is missing or damaged unless they are al-  
ready disconnected.  
If the housing of your e-STUDIO60F or the power sup-  
ply—in particular the power or telephone cables—, are  
damaged, please unplug the e-STUDIO60F. The hous-  
ing of the e-STUDIO60F may only be opened by au-  
thorised service personnel.  
Unplug the e-STUDIO60F from the mains and tele-  
phone line before cleaning. Do not use liquid or aerosol  
cleaning agents such as sprays, or polishes.  
Do not expose the e-STUDIO60F to rain or any oth-  
er form of moisture. There is a risk of electric shock  
or fire. If any liquid is accidentally spilled into the  
e-STUDIO60F, immediately remove the power plug and  
have the e-STUDIO60F professionally inspected.  
Your e-STUDIO60F has been tested to EN 60950 or  
IEC 60950 and may only be operated on telephone  
networks and power supplies that conform to these  
standards.  
In a thunderstorm, disconnect the e-STUDIO60F from  
both the mains and the telephone line. If you are una-  
ble to disconnect the e-STUDIO60F, avoid using the fax  
machine or the telephone during the storm. There is a  
risk of electric shock from lightning and risk of damage  
to the machine.  
Your e-STUDIO60F is only intended for use in the coun-  
try in which it was purchased. It may only be operated  
with telephone systems and power equipment which  
meet these standards.  
5
Installation  
Unpacking  
Set-up  
Please read all warning notices and instructions and  
follow them precisely.  
Unpack the box and check that it includes the follow-  
ing:  
1 Remove the transport protection strips.  
telephone cable  
2 Insert the paper tray in the slots provided behind the  
paper feed mechanism.  
network cable  
power supply  
ink cartridges and  
chip card  
“Plug ’n Print”  
paper tray  
3 Pull out the paper exit tray.  
machine  
user guide  
4 Pull up the document tray.  
installation guide  
CD-ROM  
6
Next connect the telephone plug to the line socket on  
the wall.  
Loading paper  
Please use only paper which is specifically intended for  
use with ink cartridge printers (standard format is A4  
210×297 mm, 80 g/m²). Follow the instructions of the  
manufacturer.  
Do not load paper while the e-STUDIO60F is printing!  
1 To prevent several sheets being drawn into the ma-  
chine at once, first fan out the paper to separate the  
sheets and then straighten the stack on a flat sur-  
face before inserting it into the paper feed.  
Additional devices  
In addition to your fax machine, you can also connect  
other devices such as additional telephones, call-fee  
indicators answering machines or modems to a single  
telephone line (also see Settings/Additional telephone).  
If you intend using special auxiliary devices with your  
fax machine, please contact your dealer.  
If you wish to receive faxes via modem, you must set  
your fax machine to MANUAL RECEPTION.  
2 Insert up to 100 sheets of paper up to the end-  
Connect the external phone to the EXT. socket on the  
back of the e-STUDIO60F.  
stop in the paper feed mechanism.  
Power supply  
Connect the power supply unit to the e-STUDIO60F,  
then use the network cable to connect the power sup-  
ply unit to the mains.  
Connections  
First connect the telephone cable plug socket labelled  
LINE on the back of the machine.  
7
3 Take the ink cartridges out of their packaging and  
v If you want to connect the e-STUDIO60F to a PC,  
please refer to the chapter PC connection. You  
must install the software first and then connect  
the e-STUDIO60F to the PC!  
remove the protective strip.  
v Please make sure that the protective strip was re-  
moved completely.  
After you have connected the e-STUDIO60F to  
the mains, it will prompt you to make some basic  
settings as follows.  
Be careful not to touch the nozzle or the con-  
tacts!  
Country selection  
1 Press OK.  
2 Use / to choose your country.  
3 Press OK twice.  
4 Insert the colour cartridge with the contacts for-  
ward and the “nose” down into the left compart-  
ment of the cartridge holder.  
Inserting cartridges  
Before you can print documents, there have to be ink  
cartridges in your e-STUDIO60F. Therefore two free  
cartridges for a few test pages are included with your  
machine.  
The display will indicate if one of the cartridges is emp-  
ty or if there is no cartridge in the e-STUDIO60F.  
1 Open the machine by pulling the lever under the  
control panel.  
5 Insert the black cartridge into the right compart-  
ment. Close the cartridge holder. You’ll hear a click  
when it snaps home.  
6 Close the machine.  
2 Press the lever in the middle of the cartridge holder  
to open the holder.  
8
7 Insert the chip card “Plug ’n Print” with the contacts  
facing up into the slot under the control panel and  
confirm with OK. Remove the cartridge and repeat  
the process for the second cartridge.  
Pentium processor, 200 MHz or higher  
Windows 98/2000/ME/XP and 128 MB RAM  
80 MB free disk space for the installation  
USB port  
Software installation  
v Don’t connect the e-STUDIO60F to a PC before  
installing the software!  
If you receive a warning message that the pe-  
ripheral hasn’t passed Windows Logo testing,  
choose “Continue Anyway”. Your multifunctional  
device has been tested for TOSHIBA and is fully  
compatible with Windows XP.  
1 Insert the CD-ROM into your PC. The installation  
procedure will start automatically. Follow the in-  
structions on the screen.  
2 Connect the e-STUDIO60F to your PC with a USB  
cable when you are prompted to do so.  
Cartridge alignment  
1 After inserting the cartridges for the first time, the  
machine will print out a page to check their align-  
ment.  
VALUE A  
2 Enter the value A where the image is the clearest.  
3 Confirm with OK and repeat these steps for values  
B, C and D.  
VALUE B  
Your name and number  
1 Enter your fax number (max. twenty digits) and  
press OK (to enter a plus sign hold down the CTRL  
key and press Q; to enter a blank space, press the  
_@ key).  
2 Enter your name by using the keyboard for text in-  
put (max. twenty characters). You can also enter a  
plus sign (CTRL and Q) or a slash (CTRL and M).  
Press OK.  
3 Click “Next” and follow the instructions. Choose to  
search for the driver on the CD-ROM:  
Time and date  
Enter the date and time and confirm with OK, e. g.  
12 09 03 16 30 OK for September 12th  
2003, 4:30 p. m.  
PC connection  
v Don’t connect the e-STUDIO60F to a PC before  
installing the software!  
Minimum configuration  
Your PC must have the following minimum configura-  
tion:  
9
4 Click “Next” and follow the instructions on the  
screen. You will be prompted to accept a license  
agreement. After the installation has finished, the  
PC has to be rebooted.  
10  
Settings  
You can print out a list of the current parameter settings  
by pressing M, 54 and OK.  
1 Press M, 201 and OK. Use / to select your  
country. It is important that you choose the country  
where you are using the e-STUDIO60F! Press OK  
twice.  
v To return to stand-by mode, press X as often as  
necessary.  
2 To set another language, use / to select func-  
tion 202»LANGUAGE and press OK. Choose with /  
and press OK.  
Date and time  
1 Press M, 21 and OK.  
Additional telephone  
2 Enter the date and time and confirm with OK, e. g.  
12 09 03 16 30 OK for September 12th  
2003, 4:30 p. m.  
If you have connected an additional telephone to the  
same telephone line (see chapter Installation / Connec-  
tions), you can adjust the number of rings you will hear  
in case of an incoming call.  
Your number and name  
1 Press M, 22 and OK.  
1 Press M, 2912 and OK.  
2 Change the value (3, 4 or 5) and press OK.  
2 Enter your fax number (max. twenty digits) and press  
OK. (To enter a plus sign hold down the CTRL key  
and press Q; to enter a blank space, press the _@  
key.)  
3 Set your name by using the keyboard for text input  
(max. twenty characters). You can also enter a plus  
sign (CTRL and Q) or a slash (CTRL and M on the  
keyboard for text input). Press OK.  
With C you can delete a wrong character.  
Network type (PABX)  
Private branch exchange systems are very common in  
large companies. To get a connection from a private  
branch exchange to the public network you have to  
dial a key to obtain the outside line.  
(An additional telephone connected to a normal tele-  
phone line together with your e-STUDIO60F must not  
be confused with a private branch exchange.)  
If you connect the e-STUDIO60F to a PABX, you can  
set the prefix for an outside line. The e-STUDIO60F will  
automatically dial the prefix with each number that ex-  
ceeds a certain amount of digits.  
1 Press M, 251 and OK. Use / to select PABX  
and confirm with OK.  
2 Select function 252»PREFIX using / and press  
OK. Enter the number of digits and press OK (e. g.  
if internal numbers consist of four digits, enter 5).  
3 Press the key you need to reach an outside line.  
This is usually 0. Confirm with OK.  
If the number of digits for an internal call is exceeded,  
the prefix for an outside line will be automatically add-  
ed.  
Country and language  
These settings will determine the language of the dis-  
play and the local telephone network settings.  
11  
Directory  
4 Confirm with OK.  
Your e-STUDIO60F lets you create a directory by mem-  
orising single entries and lists of entries.  
Modify  
1 Press M, 13 and OK.  
Your machine can store up to 200 entries with names  
and fax numbers. You may also group several names  
together to create a list.  
2 The directory appears in alphabetic order. Use /  
to select the entry or list you wish to modify. Press  
OK.  
When entering a name, you can use + to type capital  
letters (press and hold the + key and type the desired  
key).  
3 Modify the entry and confirm each step with OK.  
With CTRL you can type special characters (e. g. hold  
down CTRL and press W to type a hyphen).  
Transfer to a PC  
If you have connected your e-STUDIO60F to a PC, you  
With / you can move the cursor within an entry and  
with \ you can delete a character.  
can transfer the directory to the PC to edit it.  
On your PC, click on Start > Programs > MF Inkjet >  
Directory.  
Add name  
For each record, you must store a name and fax  
You can transfer the directory from the PC to the  
e-STUDIO60F (and vice versa) by clicking on the icons  
on the bottom of the window.  
number.  
1 Press M, 11 and OK. Enter a name and press OK.  
Enter a fax number and press OK.  
2 The e-STUDIO60F automatically assigns a number  
to the record. To modify this number enter the digit  
required and press OK.  
3 Use / to choose W.ASSOC.KEY if you want to as-  
sign a shortcut key (letter) for quick access to the  
record. Press OK.  
4 If need be, select the appropriate transmission  
speed to send your faxes. With a good telephone  
connection, the appropriate rate is the highest one.  
Press OK.  
Add list  
You can group several directory entries together f.e. to  
send a fax to several persons at once.  
1 Press M, 12 and OK. Enter a name for this list  
and press OK.  
2 Press a shortcut number, a letter or use / and OK  
to select entries to add them to the list. Press OK.  
3 The list ID number will automatically appear on the  
display. If you wish to modify this number, you may  
do so. Confirm with OK.  
Print  
Press M, 15 and OK. The directory is printed.  
Cancel  
1 Press M, 14 and OK.  
2 The directory appears in alphabetic order. Use /  
to select the entry or list you wish to delete.  
3 Press OK.  
12  
Fax  
5 If you want to send just one page, use / to choose  
DONE and press OK. If you want to send further  
pages, choose NEXT PAGE and insert another page.  
Then press OK.  
Sending a fax Y  
There are two ways to fax a document: You can place  
it onto the scanner glass (flatbed scanner) directly or  
load it into the automatic document feeder.  
After transmission, the e-STUDIO60F will automatically  
print a transmission report.  
Flatbed scanner  
If you want to cancel the transmission, press X twice.  
1 Open the flatbed scanner cover. Please make sure  
that the scanner glass is clean before placing the  
original.  
Automatic feeder  
If you are working with originals of an odd size or pho-  
tos, please use the flatbed scanner.  
A5 size documents should be inserted landscape.  
The following points are the most common caus-  
es of problems when inserting documents into the  
feeder. Do not insert ...  
pages that are smaller than A5.  
pages from newspapers (printer’s ink).  
stapled pages or pages with paper clips.  
creased or torn pages.  
2 Place the document face down onto the glass.  
wet pages or pages with corrections made with  
correction fluid; dirty pages or pages with a  
glossy or laminated surface.  
pages joined with sticky tape or glue, with adhe-  
sive stickers such as “post-it®” notes, or pages  
which are too thin or too thick.  
1 Place the document face up into the document  
feeder (up to 10 pages printed on 60–90 g/m² pa-  
per).  
a
u
s
p
r
i
n t  
r i  
n
e
e
a
r
a
m
e
s
u r  
l
e
p r  
c o  
a
p
s
u
e
l
g
o n t e  
r
e
s
a
i
s
l
e
e
m
i
f
a
l
a
æ
i d e  
t
t
a
s
f i  
b
u
a
r
e
p
æ
t
n
a
r
i
d e  
s
a
n
c t  
m
t
t
i
e
a t  
u
s
l
s
s
i
a
m a  
e
c o l  
s
s
p
l
o
a
u
m
a
s
q
a
l
u
q
t
s
a
s
r
u
a
l
s
e
m
u æ  
r e  
c t u  
o
e
r
e
æ
e
e
r
e
g
t
t u m  
u
s
s
n
n
c
b a  
q
t
i
s
t
a
i
a
e
f
p
a
u
u
æ
v
a
n
a
s
c t  
t
n
s  
u
r
t
s
s
1
l
o
a
s  
e
e
s
0
o
v i  
e
t
c  
n
p
a
æ
l
e
i
æ
i
r
e a  
i
s
s
n t  
u
n e  
l
d e m  
m
a
r
l
e
q
u
r
e
t
s
i
m a  
m
t
e g  
t
u
u
r
d
q
n
i
a
s
n
r
e
o
a
q
æ t  
a
i
u
s
d i  
s
q
p
a
b  
t
æ
l
q
p r i  
u
c t  
s
l
c
e
l
e
e
e
p
u
e
s
s
e
c o l e  
u
o
r
æ
v i  
l
o
p
r i  
s
c e  
a
a
p
u
a
u
l
u
q
g
e
r
v i n  
b
e
i  
m
i s  
l  
n
i
s
f i  
n
e
r
s
n
n
l
t
e
m
u
m a  
i
a
t
n u  
a
d
t
i
c
o l  
a
l
c
æ
v
d i  
f
e
s
r i  
u
c t  
æ
e
a  
q
l  
i
a
f
s
t
e m  
s
q
q
d i  
o l  
i d  
a
p
u æ  
i
l  
c e  
o n  
s
l
i  
a
l o  
u
u
s
u
m
n
l
s
v
i
s
a
e
e
b
l l  
c e  
e
e
l
u
m q  
i
a
e
e
u
n d i  
i  
i
i
b
g
a
o
l
n
m
s
a
r
r
b
t
a
a
s
l
n
t
e
p o n  
æ
v
i
a
v
i
e
t
t
c
o
a
l e  
e
n u  
a
d i  
c e  
a
s
a t  
u
s
p
i  
c e  
u
e
s
t
a
a
p
u
t
s
f
a
c t  
t
r e  
n
g
s
s
l
e s  
i
i
e
a
e
l
l
n
d e m  
a
e
r
i
d
i
e
f
o
p
i
n
l
c t  
u
u
l o  
s
a
i
c o l  
t
l
æ
u a  
l
e
s
s
b
i
i  
i
c
o
t
æ
m
c
d e  
s  
d
n
l
r
i
e
i
a
u
e
t
u
i
s
s
l a  
e
s
l
n u  
s
t
a
n  
r
t
æ
i
l
b
a
s
u
n
m
s
t
a
s
s
i
e
r
t
i  
s
l
l
a
l
s
a
c t  
l
l
l  
o
s
t
s
a
s
l
t
u
r
r
l
o
a
s
t
r
u
i
i  
s
i
m q  
e
i
l
a
c
u
l  
s
c t  
i
s
m
p o n  
l
s
p
p
q
e
i
i  
3 Align it with back left corner of the scanner (marked  
u
f
o
u
s
l
a
d
t
i
s
u
m
t
i
n
æ
v
l
t  
l
a  
l
t
u
e m  
s
a t a  
t
e
d
e
s
æ t  
i
a
r
t
q
u
æ  
e
c
u
s
s
i  
o
i
a
i  
n d i  
s
e
u
s
s
b
a
i
e
s
t
u
l
v i n  
a
e
a
l
q
f
s
i
a
s
r
s
b
t
c e  
t
s
l
u
a
s
r
u
t
a
u
d
æ
v
t
a
i
l
o
e
n
i
s  
l
s
n
c e  
a i  
e
p
l
e
r
r i  
u
c o l e q u  
l  
s
u r  
e
g
e
æ t  
i
l
n
a
s
p
l
l o  
m
i  
e
g
l  
e a  
r
d
i
u
with arrows).  
u
æ
v
a
f i  
o
e
a
b
e
c e  
e
s
d
e
n
p
c o l e  
a
b
a
q
s d
t
s
f i d  
i
r i m  
t
m
a
e
n
u
r
t
i
d i  
c e  
t
æ
v
e
a
s
l
d i  
b
u
m
a
e s  
a
a
a
i
v
t
a
n
t
d i c e  
t
u
r
e a  
2 Dial the fax number.  
3 Press Y to start the transmission.  
After transmission, the e-STUDIO60F will automatically  
print a transmission report.  
If you want to cancel the transmission, press X twice.  
If you want to scan small three-dimensional objects  
(such as coins or flowers), use transparent film to pro-  
tect the scanner glass.  
Directory a  
1 Insert a document.  
4 Choose a fax number and press Y.  
13  
2 Press a and use /, a letter or a number key to  
Receiving faxes  
choose a record or a list from the directory.  
If you don’t change the factory settings, faxes will be  
automatically printed. If the e-STUDIO60F has run out  
of paper or ink, incoming faxes will be stored in the  
memory.  
3 Press Y to start the transmission.  
Redial L  
The last ten numbers dialled on the e-STUDIO60F will  
After inserting paper or cartridges, start printing by  
pressing Y.  
be stored in the redial memory.  
To change the fax reception settings, please refer to  
Advanced settings / Fax settings.  
1 Insert a document.  
2 Press L as often as necessary. When the desired  
number appears on the display, press Y to start the  
transmission.  
Fax answering device  
The fax answering device allows you to keep docu-  
ments confidential by storing them. They need not be  
printed as soon as you receive them. The ; symbol on  
the display lets you know the state of the fax answer-  
ing device:  
Broadcast &  
You may choose to send a document to several recipi-  
ents.  
1 Insert a document.  
; on—fax answering machine is on  
2 Dial a number (or use the directory or L) and press  
; blinking—documents are in the memory or are be-  
ing received  
&. Repeat this step for up to ten recipients. Press  
Y.  
; off—memory is full  
3 If you want to cancel the transmission, press X  
You can ensure document confidentiality by using the  
four-digit code. Once stored, this code is required to  
print fax messages and to activate/deactivate the fax  
answering device.  
twice.  
Resolution f%F  
If necessary, you may change the resolution. Press  
f%F as many times as necessary to select the re-  
quired mode. An icon on the display will show the cur-  
rent mode. If no icon is highlighted, the document will  
be sent in standard resolution.  
Storing an answer code  
Press M, 343 and OK. Enter a four-digit code and  
press OK.  
Activate/deactivate  
Press M, 342 and OK. If you have stored an access  
code, enter it and press OK. Use / to select WITH or  
WITHOUT and press OK.  
standard—for good quality documents, without draw-  
ings or small details  
Printing messages  
Press M, 341 and OK. If you have stored an answer  
code, enter it and press OK. Documents received and  
stored in the memory are printed and then deleted from  
the memory.  
f—for documents with drawings or small characters  
%—for documents with very fine or small drawings  
F—for photos  
Send report  
The e-STUDIO60F can print a transmission report every  
time you have sent a document. This way you are given  
confirmation that your document has been received.  
Contrast O  
If the document is too light or too dark, you may  
change the contrast. Press O as many times as neces-  
sary to choose the desired contrast. The current setting  
is shown on the display.  
1 Press M, 231 and OK. Select one of the follow-  
ing options:  
WITH—a report is given when the transmission was  
completed successfully or when it is completely aban-  
doned.  
14  
WITHOUT—no transmission report; however, your  
e-STUDIO60F notes all transmissions that took place  
in its log (see Hints & tips / Logs).  
5 Enter the number of pages and press OK (this is  
only necessary when you have chosen MULTIPLE  
above).  
ALWAYS—a report is printed with each transmission.  
Additional telephone  
ON ERROR—a report is only printed if the transmission  
You can connect an additional telephone on the same  
line as your e-STUDIO60F. When a call comes in, the  
additional telephone will ring a few times, then the  
machine switches to fax reception. If necessary, the  
number of rings can be changed in the technical set-  
tings (see Settings / Additional telephone).  
failed or is abandoned.  
2 Confirm with OK.  
Delayed transmission  
1 Press M, 31 and OK.  
2 Enter the fax number and press OK.  
3 Enter the time you want the fax to be sent (within 24  
hours), e. g. 17 30 for 530 p. m. Press OK.  
4 Set the contrast and other settings and confirm  
each entry with OK.  
Polling  
By means of this function documents which have been  
prepared for collection from another fax machine can  
be retrieved. You can also allow a document to be  
polled from your fax machine.  
Polling reception  
1 Press M, 32 and OK.  
2 Enter the polling number and press Y.  
Delayed polling  
1 Press M, 32 and OK.  
2 Enter the polling number and press OK.  
3 Enter the time (within 24 hours) you wish to poll  
the document—e. g. 17 30 for 530 p. m.—and  
press Y.  
Polling transmission  
You may place a document in your e-STUDIO60F and  
make it available to one or more recipients who can ob-  
tain a fax of this document by calling your e-STUDIO60F  
with the polling function.  
1 Insert a document in the feeder.  
2 Press M, 33 and OK.  
3 Use / to choose between the two options:  
SIMPLE—the document may be transmitted only once  
(from the memory or feeder). Press OK.  
MULTIPLE—the document may be polled as many  
times as necessary (from the memory). Press OK.  
4 If necessary, adjust the contrast and press OK.  
15  
Copy  
Inserting a document  
Automatic feeder  
Place the document face up into the document feeder  
(up to 10 pages on 60–90 g/m² paper).  
There are two ways to copy a document: You can place  
it onto the scanner glass (flatbed scanner) directly or  
load it into the automatic document feeder.  
a
u
s
p
r
i
n t  
r i  
n
e
e
a
r
m
a
e
s p  
u r  
l
e
p r  
c o  
a
s
u
e
l
g
o n t e  
r
e
s
a
i
s
l
e
e
m
i
a
a
f
l
æ
i d e  
t
t
a
b
a
f i  
r
e
p
s
æ
t
a
i
d e  
n
r
s
a
n
m
t
t
e
c t  
i
u
s
l
s
s
a t  
a
m a  
e
c o l  
i
s
s
p
l
o
a
u
m
a
l
u
q
s
q
a
t
s
a
s
r
u
a
l
s
e
m
u æ  
r e  
c t u  
o
e
r
e
æ
e
e
r
e
t
t u m  
u
s
s
g
n
n
c
b a  
q
t
i
s
t
a
i
a
e
f
p
a  
a
a
u
u
æ
v
n
a
s
c t  
t
n
s  
u
r
t
s
s
1
l
o
a
s  
e
e
s
0
o
v i  
n
e
t
c  
n
p
a
æ
l
e
i
æ
i
r
s
e a  
s
n t  
u
n e  
l
d e m  
m
a
r
l
e
q
u
u
r
e
t
s
i
m a  
m
t
t
u
u
u
r
d
q
n
i
e g  
a
s
n
r
e
o
a
q
æ t  
a
i
u
s
d i  
s
q
t
æ
l
q
p r i  
u
c t  
s
l
p
a
c
e
l
e
e
e
p
u
e
s
s
r
e
c o l e  
u
v i  
l
o
p
t  
r i  
o
s
æ
c e  
a
l
u
q
g
e
a
p
u
r
v i n  
u
i  
m
s  
l  
n
i
b
f i  
e
n
e
r
s
n
a
n
u l  
s a  
t
e
m
u
m a  
i
a
t
n u  
d
t
c
o l  
a
l
c
æ
v
d i  
f
i
e
s
r i  
c t  
d i  
æ
e
a  
q
l  
i
a
f
s
t
e m  
s
q
q
o l  
i d  
a
p
u æ  
i
l  
c e  
o n  
s
l
i  
a
l o  
u
u
s
u
m
n
l
s
p
v
i
s
a
e
e
b
l l  
c e  
e
e
l
u
m q  
i
a
e
e
u
n d i  
i  
i
b
g
a
o
l
n
m
s
a
r
r
b
t
a
e s t  
a
s
l
n
i
t
e
p o n  
æ
v
i
v i  
t
t
c
o
a
a
l e  
e
a
e
a
d i  
c e  
n u  
a
s
a t  
æ
s
p
i  
c e  
u
e
s
t
t
s
a
f
a
p
a
c t  
u
t
r e  
n
g
s
s
l
i
i
e
r
a
e
l
l
n
d e m  
u
i
a
e
i
d
i
e
o
p
i
n
l
c t  
u
u
l o  
s
a
r
c o l  
u a  
l
e
u
s
b
i
i  
t
i
t
Flatbed scanner  
o
t
æ
n
l
c
d e  
s  
r
æ
a
i
e
i
e
c
t
u
i
e
s
l
n u  
s
s
s
l a  
t
a
i
l
t
r
e
t
æ
b
a
s
n
m
s
t
a
s
s
i
r
s
t
u  
i  
l
o
a
l
s
e
a
c t  
l
l
t
s
l
a
s
q
s
l
t
u
r
r
l
o
l
a
s
t
r
u
i
r i  
a
s
i
m q  
e
i
l
a
c
u
l  
s
c t  
i
s
m
p o n  
s
l
p
g
p
q
u
e
i
i  
u
s
a
f
o
l
i
s
u
m
t
i
n
æ
v
l
t  
l
l
t
e m  
s
a t a  
t
e
d
a  
e
u
i
s
a
r
æ t  
q
u æ  
i
e
c
u
t
s
s
i  
o
i
a
i  
n d i  
s
e
u
s
b
a
i
s
s
u
l
v i n  
e
a
e
a
l
q
f
s
i
a
s
r
s
b
t
c e  
t
s
l
u
a
s
r
u
t
a
u
d
æ
v
t
a
i
l
o
e
u
n
i
s  
l
s
n
c e  
a i  
e
l
e
r
p
1 Open the flatbed scanner cover. Please make sure  
that the scanner glass is clean before placing the  
original.  
r i  
s
u
e
g
e
c o l e q u  
u
æ t  
i
l
n
a
s
p
l
r e  
l o  
i  
e
g
m
l  
r
d
i
u
u
æ
v
a
a
f i  
o
e
a
b
e
c e  
e
s
d
e
n
b
p
c o l e  
s d
a
a
q
t
s
f i d  
i
r i m  
t
m
a
e
n
u
t
i
r
d i  
c e  
t
æ
l
v
e
a
s
d
b
a
u
m
e s  
a
a
a
i
v
t
a
n
t
d i c e  
u
r
e a  
If you are working with originals of an odd size or pho-  
tos, please use the flatbed scanner.  
A5 size documents should be inserted landscape.  
The following points are the most common caus-  
es of problems when inserting documents into the  
feeder. Do not insert ...  
2 Place the document face down onto the glass.  
pages that are smaller than A5.  
pages from newspapers (printer’s ink).  
stapled pages or pages with paper clips.  
creased or torn pages.  
wet pages or pages with corrections made with  
correction fluid; dirty pages or pages with a  
glossy or laminated surface.  
pages joined with sticky tape or glue, with adhe-  
sive stickers such as “post-it®” notes, or pages  
which are too thin or too thick.  
3 Align it with back left corner of the scanner (marked  
Standard copy K  
1 Insert a document (see above).  
with arrows).  
2 Choose one of the K keys (copying in colour or  
black and white) and press it twice.  
“Creative” copy K  
1 Insert a document (see above).  
2 Press one of the K keys (copying in colour or black  
and white) once. You can now make the following  
settings:  
3 Enter the desired number of copies and press  
OK.  
NUMBER OF COPIES  
If you want to scan small three-dimensional objects  
(such as coins or flowers), use transparent film to pro-  
tect the scanner glass.  
4 The copying quality of the e-STUDIO60F is high-  
er than the resolutions used for fax transmis-  
sion. Use / or f%F to choose the resolu-  
tion:  
RESOLUTION  
16  
FAST—for good quality documents, without drawings  
or small details  
9 If you have chosen colour copy, you can adjust the  
RGB values. All colours can be defined as combi-  
nations of red (R), green (G) and blue (B). You can  
change the values for each of these basic colours  
NORMAL—for documents with drawings or small char-  
acters  
with /. Press OK.  
R.G.B.  
QUALITY—for maximal resolution  
10 You can adjust the luminosity (brightness) of the  
Press OK.  
printer. Use / to change the setting: - is darker, +  
is lighter. Press OK.  
LUMINOSITY  
5 Your e-STUDIO60F can reduce or magnify a spe-  
cific part of a document from 25% to 400%. Set  
the desired zoom value with the key pad and press  
11 Use / to set whether you use plain, coated,  
or photo paper, or transparent film and press  
OK.  
ZOOMING  
OK.  
»PLAIN PAPER  
6 You can change the origin of the flatbed scanner  
(by default, this is the back left angle of the scanner  
window marked with arrows).  
By entering new values of x and y given in millime-  
tres, you will move the scanning zone as shown  
on the figure below. Confirm the entries with  
OK.  
ORIGIN  
7 If the document is too light or too dark, you may  
change the scanning contrast. Press / or O as  
many times as necessary to choose the desired  
contrast, as shown by the position of the cursor.  
Press OK.  
CONTRAST  
8 You can adjust the saturation. Saturation is the col-  
ourfulness judged in proportion to its brightness.  
Use / to change the setting: - is more grey, + is  
more saturated. Confirm with OK.  
SATURATION  
17  
Scan to PC  
If you want to scan small three-dimensional objects  
(such as coins or flowers), use transparent film to pro-  
tect the scanner glass.  
You can use the e-STUDIO60F to scan documents and  
edit the document with a PC (see Installation / PC con-  
nection).  
Automatic feeder  
Inserting a document  
There are two ways to scan a document: You can place  
it onto the scanner glass (flatbed scanner) directly or  
load it into the automatic document feeder.  
Place the document face up into the document feeder  
(up to 10 pages on 60–90 g/m² paper).  
a
u
s
p
r
e
i
n t  
r i  
n
e
a
a
m
e
p r  
s p  
u r  
l
e
c o  
a
s
e
o n t e  
r
l
g
e
u
i
s
s
l
l
e
m
a
a
a
i
f
i d e  
e
æ
t
b
t
a
a
f i  
r
e
p
s
æ
t
a
a
i
d e  
n
r
s
a t  
n
m
l
t
a
t
m a  
e
c t  
i
u
s
s
s
e
c o l  
i
s
s
l
l
o
a
u
m
a
s
q
a
u
q
t
s
p
o
s
r
e
u
a
l
e
m
u æ  
r e  
c t u  
a
o
r
æ
e
e
r
g
t
a
u
e
s
s
n
n
c
t u m  
e
c t  
b a  
q
v
t
i
s
t
a  
i
n
a
e
f
p
o
a
a
u
æ
a
s
t
e
s  
s
u
t
s
s
1
u
l
a
e
s
0
v i  
e
t
c  
n
p
a
æ
l
e
i
æ
i
r
i
e a  
o
s  
n t  
u
n
l
m
d e m  
a
r
l
e g  
e
q
r
e
t
s
i
m
t
t
a
e
u
u
d
q
n
i
m a  
u
a
æ t  
s
n
e
o
q
a
r
i
u
s
d i  
s
q
p
a
t
æ
l
o
q
p
u
c t  
s
l
c
e
l
e
e
e
p
r i  
u
e
s
s
r
e
o
æ
u
v i  
r i  
i  
l
s
c e  
a
a
p
u
c o l e  
u
l
u
q
g
e
s a  
r
v i n  
i
b
f i  
e
o
s  
l  
m
n
r
n
o  
m
e
s
n
a
n
t
e
u
m a  
i
a
n u  
d
t
i
e
c
o l  
a
l
c
æ
v
d i  
e
s
r i  
u l  
c t  
æ
a  
q
l  
t
i
a
f
s
t
e m  
s
q
q
d i  
o l  
l  
i d  
a
p
u æ  
i
n
s
Flatbed scanner  
c e  
u
f
i
s
l
i  
a
l o  
u
m q  
s
v
s
e
e
m
l
l
o n  
b
l l  
c e  
e
u
e
i
a
e
u
e
u
n d i  
i  
i
b
g
o
a
a
o
l
l
n
m
i
s
a
r
e
r
b
t
a
a
s
n
t
e
p o n  
æ
i
a
v i  
t
t
c
o
a
l e  
e
a
d i  
c e  
n u  
a
s
a t  
s
i  
c e  
u
e
s
t
a
n
a
p
u
s
f
a
c t  
t
r e  
e s t  
i
n
i
g
s
e f  
p
v i n  
l
e
r
æ
l
a
i
e
l
l
e
d e m  
u
a
u a  
d
i
o
l
c o l  
l
u
u
l o  
s
a
i
l
c
e
i
c
i
o
b
t
i  
m
c
d
n
t
u m q  
r
æ
a
i
c
e
i
e
d e  
s  
i
u
t
s
s
l a  
e
s
l  
n u  
t
a
r
t
æ
i
l
b
a
s
n
m
s
s
e
r
i  
s
l
l
o
a
l
a
i
a
s
c t  
l
l
l  
s
t
s
a
s
l
o
i
t
r
r
l
i
a
t
r
u
i
i  
m q  
e
l
a
s
l  
c t  
s
i
m
p o n  
l
s
c
g
p
q
e
s
i
i  
u
s
a
f
o
u
l
d
i
s
u
m
t
i
a  
n
æ
v
l
l
l
a
r
e m  
s
a t a  
t
e
e
s
æ t  
i
t
q
æ  
i
e
c
o
u
s
s
i  
i
a
i  
s
1 Open the flatbed scanner cover. Please make sure  
that the scanner glass is clean before placing the  
original.  
n d i  
s
e
i
u
s
a
s
l
e
s
q  
v i n  
a
s
e
a
l
q
f
s
i
a
s
s
b
t
c e  
s
l
t
u
a
s
r
u
t
a
a
d
æ
v
t
i
u
l
e
n
i
c e  
l
o
s
n
a i  
r
e
p
l
e
s
u
c o l e q u  
u r  
e
g
e
r i  
i
n
æ
l
s
l
e
a
l o  
i  
m
p
e a  
l  
u
t
a
r
d
æ
v
g
f i d e  
o
e
i
c e  
a
b
e
e
s
n
t
p
a
c o l e  
s
a
q
f i d  
i
r i m  
t
m
a
e
s
n
i
u
o
r
t
a
d i  
c e  
æ
l
v
e
s
u
m
a
b
e s  
a
a
a
i
v
t
a
n
t
d i c e  
u
r
e a  
If you are working with originals of an odd size or pho-  
tos, please use the flatbed scanner.  
A5 size documents should be inserted landscape.  
The following points are the most common caus-  
es of problems when inserting documents into the  
feeder. Do not insert ...  
2 Place the document face down onto the glass.  
pages that are smaller than A5.  
pages from newspapers (printer’s ink).  
stapled pages or pages with paper clips.  
creased or torn pages.  
wet pages or pages with corrections made with  
correction fluid; dirty pages or pages with a  
glossy or laminated surface.  
pages joined with sticky tape or glue, with adhe-  
sive stickers such as “post-it®” notes, or pages  
which are too thin or too thick.  
3 Align it with back left corner of the scanner (marked  
Open the scan window Z  
with arrows).  
Press Z to open the scan window on the PC.  
To edit the scanned document, open a graphic ap-  
plication and choose the scan function. Choose the  
e-STUDIO60F TWAIN driver to start scanning.  
18  
Click on the lower left icon to create a preview, click on  
the lower right icon to start scanning.  
Click on “Profile” to create different profile for different  
document types you want to scan. A profile contains  
all important settings for a certain type of document. To  
create a profile, first make all settings and then choose  
“New” profile. Enter a profile name and click “Save”.  
19  
SMS  
Your e-STUDIO60F lets you send SMS messages all  
over the world. SMS (Short Message Service) was orig-  
inally devised for mobile communication, but it is now  
available in many countries via regular telephone lines.  
Availability of the SMS service depends on the coun-  
try and operator. Your e-STUDIO60F has been pre-set  
to use the SMS service in your country . If it does not  
work correctly, please contact your SMS service pro-  
vider and change these settings (see Advanced set-  
tings / SMS settings).  
2 Press W and enter the first telephone number.  
3 Press & and enter another telephone number  
(max. 10).  
4 Press W to send your message.  
Receiving an SMS  
Received SMS messages will be printed automatical-  
ly. (You can change this setting—see Advanced set-  
tings / SMS settings.) If you switch off automatic print-  
ing, messages will be stored in the memory. If SMS  
messages are stored, the lamp next to the W key will  
flash.  
Send SMS  
One recipient  
1 Press W twice.  
Reading an SMS  
2 Type the message you want to send.  
1 Press W and OK.  
To type capital letters, hold down + and press the de-  
sired key. To type special characters, hold down CTRL  
and press the desired key (e. g. to enter a question  
mark, hold down CTRL and press V). You can move  
the cursor with / and delete characters with \.  
2 Use / to choose a message and press OK.  
3 You can scroll up and down within the message with  
/.  
Printing an SMS  
3 Press W.  
1 Press W and K.  
4 Enter the telephone number.  
2 Use / to choose a message and press OK.  
If you want to send an SMS to a phone abroad, you  
should dial the number in its international form (e. g.  
0049… for Germany).  
Deleting an SMS  
1 Press M, 43 and OK.  
5 Press W to send the message. The e-STUDIO60F  
2 You can now choose which messages to delete us-  
will print a transmission report.  
ing /:  
This function can be deactivated (see Fax / Send re-  
port).  
SELECTED—press OK and choose the messages to  
delete using /. Confirm with OK.  
ALREADY READ—press OK to delete the messages  
that you have already read.  
Directory a  
1 Press W twice.  
ALL—press OK. All messages will be deleted.  
2 Type your message and press W.  
3 To select a number from the directory, press a  
and use / to select an entry.  
4 Press W to send your message.  
Redial L  
The last ten numbers dialled on the e-STUDIO60F will  
be stored in the redial memory.  
1 Press W twice and type your message.  
2 Press W.  
3 Press L as often as necessary, until the desired  
number appears.  
4 Press W to send your message.  
Several recipients &  
1 Press W twice and type your message.  
20  
Advanced settings  
Settings list  
SMS settings  
When you select your country when setting up the  
e-STUDIO60F, the parameters for SMS emission and  
reception will be pre-set. If these settings do not work  
or if you want to use another provider, you will need to  
change these settings. Your SMS service provider will  
provide the numbers you need.  
You may print a list of your e-STUDIO60F’s parameter  
settings to monitor any changes made to the default  
parameters!  
Press M, 54 and OK.  
Fax settings  
SMS emission  
Reception mode  
1 Press M, 4611 and OK.  
If you want to receive fax messages with a modem  
(with a PC) connected on the same telephone line as  
the e-STUDIO60F, you must disable automatic fax re-  
ception.  
2 Enter the telephone number your machine has to  
dial to send SMS messages. Press OK.  
SMS reception  
Press M, 241 and OK. Use / to choose MANUAL  
(to disable automatic reception) or FAX (to receive  
faxes on the e-STUDIO60F automatically).  
1 Press M, 4612 and OK.  
2 Enter the telephone number to receive SMS mes-  
sages. Press OK.  
Memory fax reception (without paper)  
SMS alternative reception  
When the paper is finished or the cartridges are empty,  
faxes will be stored in the memory. You can disactivate  
this function.  
You might wish to receive SMS from a second provider.  
In that case you will have to enter a second telephone  
number to receive SMS messages.  
1 Press M, 242 and OK. Use / to choose one of  
1 Press M, 4621 and OK.  
the following options:  
2 Enter the second telephone number for SMS recep-  
WITHOUT PAP—faxes will be stored in the memory if  
the printer is not available.  
tion and press OK.  
WITH PAPER—fax reception will be refused if the print-  
er is not available.  
Automatic printing  
Press M, 451 and OK. Use / to choose whether  
SMS messages should be printed out automatically or  
not and press OK.  
2 Confirm with OK.  
Number of copies  
Beep  
You may print incoming documents more than once.  
Press M, 452 and OK. Use / to choose whether  
the e-STUDIO60F should emit a beep to notify you  
when an SMS message is received and press OK.  
Press M, 243 and OK. Enter a number (1 to 99) and  
press OK.  
Sorted printing  
Sender name  
When you receive documents of several pages, they  
will be received in the memory and then printed out in  
the correct order. You can avoid this by de-activating  
sorted printing:  
Press M, 453 and OK. Use / to choose whether  
SMS messages that you send should include your  
name. Confirm with OK. (Enter the name using func-  
tion 22)  
Press M, 244 and OK. Use / to choose WITH or  
WITHOUT and press OK.  
Scan settings  
Sorted sending  
Flatbed scanning  
Documents of several pages are scanned into the  
M, 271, OK—Resolution  
M, 272, OK—Zooming  
M, 273, OK—Origin  
M, 274, OK—Contrast  
M, 275, OK—Saturation  
memory and then sent. You can disable this function.  
Press M, 232 and OK. Use / to choose WITH or  
WITHOUT and press OK.  
21  
Saturation is the colour judged in proportion to its  
brightness: closer to - is greyer, + has greater satura-  
tion.  
M, 276, OK—RGB  
All colours can be defined as combinations of red (R),  
green (G) and blue (B). You can change the values for  
each of these basic colours.  
M, 277, OK—Luminosity  
Luminosity is brightness: - is darker, + is lighter  
M, 278, OK—Left/right margins  
Automatic feeder scanning  
M, 281, OK—Resolution  
M, 282, OK—Zooming  
M, 283, OK—Origin  
M, 284, OK—Contrast  
M, 285, OK—Saturation  
M, 286, OK—RGB  
M, 287, OK—Luminosity  
M, 288, OK—Left/right margins  
Printer settings  
M, 261, OK—Paper size  
M, 262, OK—Paper type  
M, 263, OK—Reduction  
M, 264, OK—Left/right margins  
22  
Hints & tips  
Paper feed  
Before you call the technical service  
In case of a paper jam, try to pull out the paper. If this  
is not possible, press M, 74 and OK to eject the pa-  
per.  
If you can’t solve your problem with the proposals  
above, please unplug your e-STUDIO60F from the  
mains and reconnect it after a few minutes.  
If a document is not drawn in correctly by the automat-  
ic feeder, press the button on the scanner cover and  
open the scanner cover.  
Change cartridges  
The display will indicate if one of the cartridges is emp-  
ty.  
Press the small lever and carefully remove the docu-  
ment.  
Please use only original TOSHIBA ink cartridges!  
1 Open the machine by pulling the lever under the  
Vertical stripes  
control panel.  
If your e-STUDIO60F makes vertical stripes when cop-  
ying, scanning or faxing, the scanner class might be  
dirty.  
Horizontal stripes  
When your e-STUDIO60F makes horizontal stripes  
when copying, scanning or faxing, the scanner might  
be locked.  
1 Open the printer cover.  
2 Unlock the scanner with the lever on the underside  
of the printer cover and close the machine.  
2 The position of the cartridge holder will show you  
which cartridge needs to be replaced. The arrows  
point to the cartridge that is empty:  
The machine doesn’t print  
If your e-STUDIO60F doesn’t print correctly, the reason  
might be that the protective strips were not removed  
completely from the printing cartridge.  
Open the printer cover and remove the cartridges. Re-  
move film residue, replace the cartridges and close the  
machine.  
Manual call  
If sending a fax fails, you can check the line by using  
the manual call function.  
1 Insert a document.  
2 Press M, 35 and OK. The built-in loudspeaker will  
be turned on and you should hear the dial tone.  
3 Dial the desired number and press Y. You will be  
able to hear how the connection is established.  
23  
3 Open the cartridge holder.  
8 Close the machine.  
4 Remove the empty cartridge.  
9 Insert the chip card “Plug ’n Print” with the contacts  
facing up into the slot below the control panel to up-  
date the cartridge information. Press OK.  
5 Take the ink cartridge out of its packaging and re-  
move the protective strip. Be careful not to touch  
the nozzles and the contacts.  
6 Insert the cartridge with the contacts forward and  
the “nose” down into the cartridge holder - the col-  
our cartridge left and the black cartridge right.  
Cartridge capacity  
Press M, 73 and OK. Press / to see the current ca-  
pacity of the black and the colour cartridges.  
Logs  
The logs list the last 30 incoming and outgoing trans-  
missions made by your machine. A report will be auto-  
matically printed after every 30 transmissions. Howev-  
er, you may request a print-out at any time.  
7 Close the cartridge holder. You will hear a click  
when it snaps home.  
Press M, 52 and OK. The logs are printed.  
Commands  
Your device will file all transmission commands (includ-  
ing faxes ready for polling or for delayed sending) in a  
list, the waiting queue.  
Consulting or modifying  
Documents in the waiting queue may have the follow-  
ing status:  
24  
TX—transmission  
DOC—in deposit  
v After each operation, the machine locks automat-  
ically.  
POL—polling  
To unlock the keyboard, enter WITHOUT in step  
3.  
TR—ongoing commands  
SMS—SMS transmission  
Locking numbers  
Press M, 62 and OK. Use / to select a document  
from the waiting queue and confirm with OK. Modify  
the parameters and confirm with OK.  
You can also just lock the keypad for numbers with a  
code. Transmissions are only possible from numbers  
included in the directory.  
1 Press M, 713 and OK.  
Immediate transmission  
2 Enter the four-digit interlock code and press OK.  
3 Use / to select DIRECTORY ONLY and press OK.  
Press M, 61 and OK. Use / to select the docu-  
ment in the waiting queue and confirm with Y or OK  
to immediately perform the selected fax or SMS trans-  
mission.  
v After each operation, the machine locks automat-  
ically.  
Cancelling a transmission  
To unlock the keyboard, enter FREE in point 3.  
Press M, 63 and OK. Use / to select the document  
in the waiting queue and confirm with OK.  
Care and maintenance  
Printing a document  
Cleaning the machine  
Press M, 64 and OK. Use / to select the document  
Use a soft, fluff-free cloth lightly moistened with a little  
alcohol (96%). Do not allow any moisture to enter the  
machine.  
in the waiting queue and confirm with OK.  
Print the waiting queue  
Press M, 65 and OK. A list of the documents queu-  
ing for transmission will be printed.  
Cleaning the scanner glass  
1 Open the scanner without pressing the button.  
Lock  
You can block access to the keypad for numbers or to  
the whole keyboard of your e-STUDIO60F.  
Locking code  
Insert the code that will be needed to temporarily un-  
lock the keyboard.  
1 Press M, 711 and OK.  
2 Enter the four-digit interlock code and press OK.  
3 Enter the code one more time and press OK.  
When a code is already registered, the machine asks  
you first to give the old code before allowing you to  
modify it.  
Locking the keyboard  
The access code must be entered each time the ma-  
chine is used.  
1 Press M, 712 and OK.  
2 Enter the four-digit interlock code and press OK.  
3 Use / to select WITH and press OK.  
25  
2 Place a lint-free cloth on a smooth surface. Moisten  
half of the cloth (A). Hold the cloth firmly to prevent  
creasing. Place the nozzle end of the cartridge on  
the moistened half (A) and move the cartridge in the  
direction of the arrow (B) into the dry half (C). Do this  
2 Use a cloth to lightly wipe the scanner glass (A).  
once only  
.
B
1 x  
A
A
C
3 Clean the golden contacts of the holder before re-  
3 Close the scanner.  
inserting the cartridge.  
4 Use / to choose BLACK=OLD and press twice  
Cleaning and aligning the cartridges  
OK.  
If the quality of printed documents deteriorates, the  
cartridges should be cleaned and aligned.  
5 Use / to choose COLOR=OLD and press twice  
OK.  
1 Press M, 72111 and OK. The cartridge will be  
cleaned automatically.  
2 Press M, 72121 and OK. The machine will  
print out a page to check the alignment. VALUE A  
3 Enter the value for A where the image is the clear-  
est.  
4 Confirm with OK and repeat these steps for values  
B, C and D.  
VALUE B  
If the printing quality is still not satisfactory, you need to  
clean the cartridges manually:  
1 Open the machine, release the cartridges from their  
holder (see Hints & Tips / Change cartridges) and  
clean the contacts (A) with a dry, fluff-free cloth.  
v Never touch the nozzles and contacts with your  
fingers and avoid shaking the cartridge!  
26  
Annex  
Functions list  
35 MANUAL CALL ................................................... 23  
Start fax transmission manually  
Press M, 51 and OK to print a function list. The list  
will be printed.  
SMS  
41 SEND SMS.......................................................... 20  
Send an SMS message  
Directory  
11 ADD NAME.......................................................... 12  
Add a name with a number to the directory  
42 READ SMS.......................................................... 20  
Read SMS messages  
12 ADD LIST............................................................. 12  
Join several directory entries to form a list  
43 DELETE SMS ...................................................... 20  
Delete SMS messages from the memory  
13 MODIFY............................................................... 12  
Modify directory entries or lists  
44 PRINT SMS ......................................................... 20  
Print-out SMS messages  
14 CANCEL.............................................................. 12  
Delete directory entries or lists  
45 PARAMETERS..................................................... 21  
Settings for sending SMS  
15 PRINT.................................................................. 12  
Print the directory  
46 SMS CENTERS ................................................... 21  
Set access numbers for SMS  
Setup  
Print  
21 DATE/TIME.......................................................... 11  
Set the current date and time  
51 FUNCTIONS LIST................................................ 27  
Print a list of functions  
22 NUMBER/NAME ................................................. 22  
Set your telephone number and your name  
23 SEND................................................................... 21  
Set parameters for sending faxes  
52 LOGS................................................................... 24  
Print a log of the last transmissions  
53 DIRECTORY ........................................................ 12  
Print the directory  
24 RECEPTION ........................................................ 21  
Set parameters for receiving faxes  
54 SETUP................................................................. 21  
Print the settings  
25 TEL. NETWORK .................................................. 11  
55 COMMANDS....................................................... 25  
Print a list of the commands in the waiting queue  
Settings for a private branch exchange system  
26 PRINTER ............................................................. 22  
Settings for the printer  
Commands  
27 FLAT BED SCAN................................................. 21  
Settings for flatbed scanning  
61 PERFORM........................................................... 25  
Immediately perform a command in the waiting  
queue  
28 ADF SCAN........................................................... 22  
Settings for scanning with the automatic feeder  
62 MODIFY............................................................... 24  
Modify a command in the waiting queue  
29 TECHNICALS ................................................ 11, 28  
Advanced technical settings  
63 CANCEL.............................................................. 25  
Delete a command from the waiting queue  
20 GEOGRAPHICAL ................................................ 11  
Set country and language  
64 PRINT.................................................................. 25  
Print details of a command in the waiting queue  
Fax  
65 PRINT LIST.......................................................... 25  
Print a list of the commands in the waiting queue  
31 TRANSMISSION.................................................. 13  
Send a fax  
Others  
32 POLLING RX ....................................................... 15  
Retrieve a fax from a polling provider  
71 LOCK................................................................... 25  
Limit the access to the machine  
33 POLLING TX........................................................ 15  
Provide a fax for polling  
72 PRINT. CARTR. .................................................. 25  
Clean, align and exchange cartridges  
34 FAX ANSW. ......................................................... 14  
Set fax memory reception  
73 CART CAPACITY................................................. 24  
Check the capacity of the ink cartridges  
27  
74 PAPER FEED....................................................... 23  
Feed paper through the mechanism  
Printer  
Type  
colour bubble ink-jet  
600×600 dpi  
Resolution  
Printing speed  
Technical settings  
Your e-STUDIO60F is delivered with factory-default  
settings. However, you may adjust it to meet your re-  
quirements by changing the technical parameters.  
b/w up to 9 pages/minute,  
colour up to 5 pages/minute  
Printing width  
Printing length  
203.2 mm  
b/w 284.3 mm, colour 279.1  
mm  
v Only change the technical settings if prompted to  
do so by authorised service personnel!  
Paper dimensions  
width: 88.9–215.6 mm length:  
Press M, 29 and OK. Use / to select and modify  
127–431.8 mm  
the desired parameter and press OK.  
Fax  
Technical data  
Fax type  
ITU T30, G3  
Connection type  
Dialling type  
Modulation  
PSTN/PABX  
General  
DTMF  
Dimensions  
(W×D×H)  
460×397×190 mm  
V17/V21/V29/V27ter/V34  
MH, MR, MMR  
Coding scheme  
Modem speed  
Resolution  
Weight  
approx. 8 kg  
33k6 bps  
Power supply  
220–240 V / 50–60 Hz  
normal mode: 200×100 dpi  
fine/photo mode: 200×200 dpi  
super fine mode: 200×400 dpi  
Power consumption approx. 10 W  
in stand-by mode  
Memory  
8 MB  
Directory capacity  
200 entries  
PSTN/PABX  
Telephone  
Disclaimer notice  
connection type  
The following notice sets out the exclusions and limi-  
tations of liability of TOSHIBA TEC Germany Imaging  
Systems GmbH (including its employees, agents and  
sub-contractors) to any purchaser or user („User“) of  
the e-STUDIO60F, including its accessories, options  
and bundled software („Product“).  
Chip card  
ISO 7816-4  
PC connection  
Connection type  
Operating systems  
Scanner driver  
USB slave 1.1  
Windows 98/2000/ME/XP  
TWAIN/WIA  
The exclusions and limitations of liability referred to in  
this notice shall be effective to the fullest extent per-  
missible at law. For the avoidance of doubt, nothing in  
this notice shall be taken to exclude or limit TOSHIBA  
TEC Germany Imaging Systems GmbH’s liability for  
death or personal injury caused by TOSHIBA TEC  
Germany Imaging Systems GmbH’s negligence or  
TOSHIBA TEC Germany Imaging Systems GmbH’s  
fraudulent misrepresentation.  
Scanner  
Type  
CCD colour  
600×600 dpi  
216×297 mm  
206 mm  
Resolution  
Scanning area  
Scanning width  
ADF capacity  
All warranties, conditions and other terms implied by  
law are, to the fullest extent permitted by law, excluded  
and no such implied warranties are given or apply in re-  
lation to the Products.  
10 sheets max.  
Flatbed scanning  
speed  
b/w 10.5 seconds/page, colour  
17.5 seconds/page  
TOSHIBA TEC Germany Imaging Systems GmbH shall  
not be liable for any loss, cost, expense, claim or dam-  
age whatsoever caused by any of the following:  
use or handling of the Product otherwise than in ac-  
cordance with the manuals, including but not limited to  
Operator’s Manual, Users’ Guide, and/or incorrect or  
careless handling or use of the Product;  
28  
any cause which prevents the Product from operating  
or functioning correctly which arises from or is attribut-  
able to either acts, omissions, events or accidents be-  
yond the reasonable control of TOSHIBA TEC Germa-  
ny Imaging Systems GmbH including without limitation  
acts of God, war, riot, civil commotion, malicious or de-  
liberate damage, fire, flood, or storm, natural calamity,  
earthquakes, abnormal voltage or other disasters;  
DECLARATION OF CONFORMITY  
(Doc)  
We,  
TOSHIBA TEC Germany Imaging Systems GmbH,  
Carl-Schurz Strasse 7  
41460 NEUSS  
additions, modifications, disassembly, transportation,  
or repairs by any person other than service technicians  
authorized by TOSHIBA TEC Germany Imaging Sys-  
tems GmbH; or  
declare under our sole responsibility that the product  
analog fax machine e-STUDIO60F fulfils the funda-  
mental requirements pursuant to Article 3 of EU Direc-  
tive 1999 / 5 / EC, and cover the following :  
use of paper, supplies or parts other than those rec-  
ommended by TOSHIBA TEC Germany Imaging Sys-  
tems GmbH.  
EN 60950 : 2000  
Subject to paragraph 1, TOSHIBA TEC Germany Imag-  
ing Systems GmbH shall not be liable to Customer for:  
EN 55024 : 1998  
EN 55022 : 1998 Class B  
EN 61000-3-2 : 2000 + A14  
EN 61000-3-3 : 1996  
loss of profits; loss of sales or turnover; loss of or  
damage to reputation; loss of production; loss of  
anticipated savings; loss of goodwill or business  
opportunities; loss of customers; loss of, or loss of  
use of, any software or data; loss under or in relation  
to any contract; or  
Additionally:  
Council Decision 1998 / 482 / EC of 20.07.98 (CTR 21)  
and EG 201 121:2000  
any special, incidental, consequential or indirect  
loss or damage, costs, expenses, financial loss or  
claims for consequential compensation;  
The device is designed for all analog PSTN interfaces in  
the European Union,  
whatsoever and howsoever caused which arise out  
of or in connection with the Product or the use or  
handling of the Product even if TOSHIBA TEC Ger-  
many Imaging Systems GmbH is advised of the  
possibility of such damages.  
as it has been tested pursuant to TBR 21.  
This product is intended for use on an analogue public  
switched network (PSTN) and for use in the country in-  
dicated on the label of the box. The machine may not  
work in other countries.  
TOSHIBA TEC Germany Imaging Systems GmbH  
shall not be liable for any loss, cost, expense, claim  
or damage caused by any inability to use (including,  
but not limited to failure, malfunction, hang-up, vi-  
rus infection or other problems) which arises from  
use of the Product with hardware, goods or soft-  
ware which TOSHIBA TEC Germany Imaging Sys-  
tems GmbH has not directly or indirectly supplied.  
For further information please contact your national  
technical support centre. Initially contact your dealer if  
problems occur during operation.  
This operating manual has been printed on chlorine-  
free recycled paper to meet the highest environmental  
standards.  
The cardboard box and the protective cardboard can  
be recycled as waste paper; corresponding to your  
country’s demands dispose the plastic foils either for  
recycling or with your rubbish.  
The CE mark confirms that the machine corresponds to  
the relevant European Union guidelines.  
This electronic facility contains recyclable material. At  
the end of use of this facility please inform yourself  
about the corresponding recycling demands of your  
country.  
non-contractual document  
Copyright © 2003 TOSHIBA TEC Germany Imaging  
Systems GmbH  
29  
30  
printing a document 24  
printing messages 13  
print directory 11  
print the waiting queue  
24  
F
Index  
fax 12  
A
fax answering device 13  
fax settings 20  
fax without paper 20  
flatbed scanner 17  
functions 3  
additional devices 7  
additional telephone 10,  
14  
add list 11  
add name 11  
aligning the cartridges 24  
answering device 13  
answer code 13  
automatic document  
feeder 2  
R
receiving an SMS 19  
receiving faxes 13  
reception mode 20  
redial 3, 13  
resolution 2, 3, 13  
return 3  
functions list 26  
H
help 3  
horizontal stripes 22  
I
S
automatic feeder 17  
automatic printing 20  
immediate transmission  
23  
ink cartridges 6  
inserting a document 15  
inserting cartridges 8  
installation 6, 9  
safety instructions 5  
scan 3, 17  
B
scanner cover 2  
scanner glass 24  
scan settings 20  
sender name 20  
sending a fax 12  
send report 13  
Send SMS 19  
set-up 6  
settings 10  
settings list 20  
SMS 3, 19  
SMS settings 20  
software installation 9  
sorted printing 20  
sorted sending 20  
standard copy 15  
start 3  
beep 20  
broadcast 3, 13  
C
K
“creative” copy 15  
cancel 11  
cancelling a transmis-  
sion 24  
capacity 23  
care and maintenance 24  
cartridges 22  
cartridge alignment 8  
cartridge capacity 23  
CD-ROM 9  
change cartridges 22  
chip card 6  
cleaning the machine 24  
commands 23  
confirm 3  
connections 7  
contrast 3, 13  
control panel 2  
copy 3, 15  
keyboard 3, 24  
L
lamp 3  
language 10  
LINE 7  
loading paper 6  
lock 24  
logs 23  
M
maintenance 24  
manual call 22  
memory 2  
memory fax reception 20  
minimum configuration 9  
modify 11  
stop 3  
stripes 22  
T
technical data 27  
technical service 22  
technical settings 27  
telephone cable 6  
text input 3  
time and date 9  
transfer to a PC 11  
transmission 2, 23  
tray 2  
N
network cable 6  
network type 10  
nozzles 25  
numbers 3  
number of copies 20  
country 10  
country selection 7  
cover 2  
cursor 3  
D
P
date and time 10  
delayed transmission 13  
deleting an SMS 19  
directory 3, 11, 12  
disclaimer notice 27  
display 2  
TWAIN driver 17  
PABX 10  
panel 2  
U
paper exit tray 2  
paper feed 22  
paper feeder 2  
paper tray 2, 6  
PC 11  
unpacking 6  
V
vertical stripes 22  
document feeder 2  
document tray 2  
W
PC connection 9  
polling 14  
E
waiting queue 23  
power supply 6, 7  
printer settings 21  
printing an SMS 19  
exit tray 2  
31  
TOSHIBA TEC Germany Imaging Systems GmbH  
Carl-Schurz-Straße 7  
41460 Neuss, Germany  
Tel.: +49 (0) 2131 1245-0  
Fax: +49 (0) 2131 1245-402  
www.toshiba-europe.com/tec  

Mitsubishi Electronics Skm28zd S User Manual
Samsung Avmwh026ea B 0 User Manual
Samsung Aw1003m User Manual
Samsung Aw2492l User Manual
Schumacher 94080043 User Manual
Sears Air Conditioner Lt103cnr User Manual
Trane Lo User Manual
Whirlpool 1187361 User Manual
Xerox Phaser 3100mfp User Manual
Xerox Workcentre 5645 User Manual