®
ViewSonic
- User Guide
PJD2121
SVGA DLP Projector
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
Model No.: VS12617
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this unit near water.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade and the third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience receptacles
and the point where they exit from the unit. Be sure that the power outlet is located near the unit so that
it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the unit. When a cart is used, use caution when moving the cart/unit combination to
avoid injury from tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged
in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall
into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has
been dropped.
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European
Parliament and the Council on restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values
issued by the European Technical Adaptation Committee (TAC) as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as
noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically
mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts
(e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to
0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
©
®
Copyright ViewSonic Corporation, 2009. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are
trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the
performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change
product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without
prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes available, please
®
register your product on the Internet at: www.viewsonic.com. The ViewSonic Wizard CD-ROM also provides
an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.
For Your Records
Product Name:
PJD2121
ViewSonic SVGA DLP Projector
VS12617
PJD2121_UG_ENG Rev. 1A 06-12-09
_______________________________
_______________________________
Model Number:
Document Number:
Serial Number:
Purchase Date:
The lamp in this product contains mercury.
Please dispose of in accordance with local, state or federal laws.
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Menu operation.................................... 16
Introduction................................... 2
Projector features ........................................... 2 Description of each menu…………….. 17
Shipping contents............................................ 3
Maintenance ........................ 18
Projector exterior view..................................... 4 Care of the projector........................... 18
Controls and functions .................................... 5 Lamp information ............................... 18
Indicators …………………….………… 20
Positioning your projector............ 7
Choosing a location......................................... 7
Troubleshooting.................. 21
Projection dimensions .................................... 7
Specifications....................... 22
Projector specifications....................... 22
Connection .................................... 8
Connecting a computer or monitor ................ 8 Dimensions ........................................ 23
Connecting Video source devices.................. 9 Timing chart ....................................... 23
Operation .................................... 10 Appendix............................... 25
Starting up the projector................................ 10 IR control table.................................... 25
Using the menus............................................ 10
Switching input signal.................................... 11
Adjusting the projected image ...................... 11
Adjusting the projection angle …………..…... 11
Correcting keystone ………………………..... 12
Selecting the aspect ratio............................. 12
Magnifying and searching for details……….. 13
Pan and Scan …………………………...……. 13
Optimizing the image..................................... 13
Fine-tuning the image quality in user modes. 14
Hiding the image …………………………..…. 14
Shutting down the projector ………............... 15
1
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Projector features
The projector integrates high-performance optical engine projection and a user-friendly design to deliver high
reliability and ease of use.
The projector offers the following features.
• Quick auto search speeding up the signal detecting process
• Digital keystone correction to correct distorted images
• Ability to display 16.7 million colors
• Multi-language On-Screen Display (OSD) menus
• Component HDTV compatibility (YPbPr)
•ViewMatch for Accurate Color Correction.
• Short throw projection lens.
• Easy to use.
• Compact size.
2
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please
contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those illustrated.
Optional accessories
Replacement lamp
3
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector exterior view
1. Focus ring
2. Projection lens
3. Lens cover
4. LED indicator
5. Adjuster foot
6. RGB (PC) signal input socket
7. Component video
(YPbPr/YCbCr) signal input socket
8. Power DC inlet
9. Kensington anti-theft lock slot
10. Rear IR remote sensor
11. Lamp cover
4
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and functions
Projector and remote control
1. Focus ring
1. POWER
Adjusts the focus of the projected image.
See "Fine-tuning the image size and clarity" on page 15
for details.
To turn on/off power.
2. Arrow keys ( Left/Right/ Up /Down)
Selects the desired menu items and makes adjustments.
3. Enter
2. Keystone +
Manually corrects distorted images resulting from an
angled projection.
Selects an available OSD function setup mode.
4. MENU/EXIT
Turns on the On-Screen Display (OSD) menu. Goes back to
previous OSD menu, exits and saves menu settings. See
"Using the menus" on page 14 for details.
5. Source
3. Keystone –
Manually corrects distorted images resulting from an
angled projection.
4. SOURCE
Displays the source selection bar. See "Switching input
signal" on page 15 for details.
5. Power button
Displays the source selection bar. See "Switching input
signal" on page 15 for details.
6. ViewMatch
To turn on/off power.
Switch in between high brightness performance or Accuracy
color performance.
6. Temperature/Power indicator light
Lights up red if the projector's temperature
becomes too high. See "Indicators" on page
22 for details.
7. BLANK
Hides the screen picture. See "Hiding the image" on page 18
for details.
5
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control effective range
Infra-Red (IR) remote control sensor is located on the
Back of the projector. The remote control must be held at
an angle within 30 degrees perpendicular to the
projector's IR remote control sensor to function correctly.
The distance between the remote control and the sensor
should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote
control and the IR sensor on the projector that might
obstruct the infra-red
Replacing the Battery
1. Pull out the battery, Please follow the illustrated
instructions. Push and hold the locking arm while
pulling out the battery holder.
2. Insert the new battery in the holder. Note the positive
polarity should face outward.
6
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select.
Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location
and distance between the projector and the rest of your equipment.
Your projector is designed to be installed in the following installation locations:
1. Front Table
Select this location with the projector placed near the
floor in front of the screen. This is the most common way
to position the projector for quick setup and portability.
Projection dimensions
4:3 image on a 4:3 screen
16:9 image on a 4:3 screen
(e): Screen
(f): Center of lens
4:3 Screen
(c)image
height
16:9 Screen
(c)image
height
(b)Projection
Distance
[m(inch)]]
0.8 (32)
(d)Vertical
offset
(b)Projection
Distance
(d)Vertical
offset
(a)Image Diagonal
[inch(m)]
[cm(inch)]
61 (24)
[cm(inch)]
5 (2)
[m(inch)]]
0.88(34.6)
1.34(52.8)
1.8(70.9)
[cm(inch)]
48(18.9)
74(29)
[cm(inch)]
9.5(3.7)
13(5)
40 (1.0)
60 (1.3)
80 (1.5)
100 (1.8)
120 (2.0)
150 (2.0)
1.2 (48)
91 (36)
7 (3)
1.6 (64)
122 (48)
152(60)
183(72)
229(90)
9 (4)
98(38.6)
121(47.6)
142(55.9)
160(63)
17(6.7)
2.0(79 )
11(4.3)
14(5.5)
17(6.7)
2.26(89)
21.5(8.5)
25.5(10)
32.3(12.7)
2.4 (94)
2.72(107)
3.4(134.3)
3.0(118)
There is +/- 2% tolerance among these numbers due to optical component variations.
This will help you determine the exact mounting position so that it best suits your installation location.
7
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
When connecting a signal source to the projector, be sure to:
1
2
3
Turn all equipment off before making any connections.
Use the correct signal cables for each source.
Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the projector (see "Shipping contents"
on page 5. ) They are commercially available from electronics stores.
Connecting a computer or monitor
Connecting a computer
The projector provides one VGA input socket that allow you to connect them to both IBM® compatibles and
Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer:
1
2
Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer.
Connect the other end of the VGA cable to the VGA signal input socket on the projector.
The final connection path should be like that shown in the following diagram:
Many notebooks do not turn on their external video ports when connected to a projector.
Refer to your notebook's documentation to switch between monitor and projector.
8
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Component Video source device
The projector provides one Component input socket that allows you to connect Component Video output from DVD
player or other equipment.
z
Make sure you have Component cable; this cable is not a standard part in shipping content.
The final connection path should be like that shown in the following diagram:
9
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Starting up the projector
1.
Plug the power cord into the projector and into a
wall socket and power adaptor. Plug DC jack to projector.
Check that the POWER indicator light on the projector
flashes blue after power has been applied.
2.
Remove the lens cap. If it is closed, it could
become deformed due to the heat produced by the
projection lamp.
3.
Press POWER on the projector or remote control
to start the projector. The POWER indicator light stays
blue when the projector is on. The start up procedure
takes about 20 seconds. In the later stage of start up, a
startup logo is projected. (If necessary) Rotate the focus
ring to adjust the image clearness.
If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message “Signal out
of range”, please set the computer output to 800X600'
Use the Menu
The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is
the overview of the OSD menu.
Important: Use
to highlight function and press Enter to select.
Main menu icon
10
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the OSD menus, please set them to your familiar language first.
1. Press MENU on the remote control to turn on the OSD.
Press Enter to select.
3. Press
Enter.
to select the language you need and press
2. Use
select.
to highlight the LANGUAGE, press Enter to 4. Press MENU on the remote control to leave and save
the settings.
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a
time.
Be sure the Auto Source Select function in the Advance menu is On (which is the default of this projector) if you want
the projector to automatically search for the signals.
You can also manually cycle through the available input signals. Press SOURCE on the projector or remote control.
Adjusting the projected image
Adjusting the projection angle
The projector is equipped with 1 adjuster foot. This adjuster changes the image
height and projection angle. To adjust the projector:
Screw the front adjuster foot to adjust the height.
11
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
If the projector is not placed on a flat surface or the screen and the projector are not perpendicular to each other, the
projected image becomes trapezoidal.
Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes.
Be careful when you press the adjuster button as it is close to the exhaust vent where hot air comes from.
Fine-tuning the image size and clarity
Sharpen the image by rotating the focus ring.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either
the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, press + / - on the projector.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio,
which is the default for this projector, and digital TV and DVDs are usually in 16:9 ratio
With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale
the image output to a different aspect than that of the image input signal.
To change the projected image ratio (no matter what aspect the source is):
Press MENU and then press
until the DISPLAY menu is highlighted and press Enter.
Press to highlight Aspect Ratio.
Select an aspect ratio to suit the format of the video signal and your display requirements.
About the aspect ratio
In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus
can be displayed on those unused black areas.
1
Fill: Scales an image to fill the projection size no matter the aspect
ratio is 4:3 or 16:9.
2
Native: Scales an image proportionally to fit the projector's native
resolution in its horizontal width.
3
4:3: Scales an image so that it is displayed in the center of the
12
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like
computer monitors, standard definition TV and 4:3 aspect DVD movies, as
it displays them without aspect alteration.
4
16:9: Scales an image so that it is displayed in the center of the
screen with a 16:9 aspect ratio. This is most suitable for images which are
already in a 16:9 aspect, like high definition TV, as it displays them
without aspect alteration.
Magnifying and searching for details
If you need to zoom in the details on the projected picture, magnify the picture. Use the direction arrow keys for
navigating the picture.
1. Press MENU until the DISPLAY menu is highlighted and press Enter.
2. Press
to highlight Magnify and press
to select a desired value.
Pan and Scan
When you zoom in the detail on the projected picture, you may use Pan and Scan to see the details.
1. Press MENU until the DISPLAY menu is highlighted.
2. Press
3. Press
to highlight Pan and Scan and press Enter.
to select a desired value.
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to suit your operating
environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
Press MENU on the remote control or projector repeatedly until your desired mode is selected.
Go to the PICTURE > Image menu, press ENTER and
to select a desired mode.
13
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1
2
3
VGA (Default): Maximizes the brightness of the projected image. This mode is suitable for presentation.
ViewMatch mode: Switch in between high brightness performance or Accuracy color performance.
Video: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input
for best viewing in a blackened (little light) environment.
User: Allows user to adjust perfer picture modes. See "Setting the User mode" on the following for details.
4
Setting the User mode
There is one user-definable mode if the current available picture modes are not suitable for your need. You can use one of
the picture modes (except the User) as a starting point and customize the settings
1. Press MENU to open the On-Screen Display (OSD) menu
2. Go to the PICTURE > Image menu and press Enter.
3. Press
to select User.
4. Press to select a sub-menu item to be changed and adjust the value with
.
This function is only available when User mode is selected up in the Picture Mode sub-menu item.
Fine-tuning the image quality in user modes
Adjusting color
1. Go to the ADVANCE > HSG menu.
2. Press
to select color you want to adjust. There
are 7 color can be adjusted.
3. Press to select a sub-menu item to be changed and
adjust the value with
Please be noticed this is one of the colors.
Hiding the image
In order to draw the audience’s full attention to the presenter, you can use BLANK on the remote control to hide the
screen. Press again to restore.
14
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Shutting down the projector
Press IPOWER and a confirmation message displays
prompting you. If you don't respond in a few seconds, the
message will disappear.
Press POWER a second time. The POWER indicator
light flashes RED, the projection lamp shuts down, and
the fans will continue to run for approximately 60
seconds to cool down the projector.
Disconnect the power cord from the wall socket if the
projector will not be used in an extended period of time.
15
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to
the projector or no signal detected, limited menu items are accessible.
Main menu
Sub-menu Options
1. DISPLAY
2. PICTURE
3. Resync (VGA Input only)
4. Language
5. Advance
6. About
16
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of each menu
Feature
Description
min
Max
N/A
Default
Allows you to select which logo screen will display during
projector start-up.
Blank Screen
Keystone
N/A
ViewSonic
Vertical Keystone function by using DDP2230 of “TI”
chip to provide vertical keystone correction
Aspect Ratio allows the user to set the aspect ratio of the
image displayed on the projector. This is helpful when the
input resolution is not at the native resolution of the
content or if the user wishes to fill the projector.
1. Fill
-30
+30
0°
Aspect Ratio
N/A
N/A
Fill
2. Native
3. 4:3
4. 16:9
Magnify
Mode
To zoom in the details one the projected screen.
User can choose different mode. Such as User, VGA,
Video and ViewMatch.
0
100
0
PC: VGA
Component:
Video
N/A N/A
When Picture mode is selected on User mode, this
function can be active.
Brightness
Contrast
Adjusts the brightness of the image. The higher the setting -100 100
the brighter the image. And the lower the setting, the
darker the image.
0
When Picture mode is selected on User mode, this
function can be active.
Adjusts the degree of difference between the dark and
light in the image. The higher the value, the greater the
contrast.
-50
0
50
31
0
When Picture mode is selected on User mode, this
function can be active.
Adjusts the image to make it look sharper. (At higher
values, will switch to Detail Enhancement)
User can set different Color Space such as Auto, RGB,
YCbCr and YPbPr.
Sharpness
16
Color Space
N/A N/A
ON
Automatic
ON
Noise
Reduction
Reduce signal noise. But depends on the input signal.
OFF
Lamp Reset
Factory Reset
To reset the lamp hours after replaced the lamp.
Return to the factory pre-set value.
Refer to Page 16, “Fine-tuning the image quality in user
modes”
NA NA
NA NA
NA
NA
HSG
NA NA
NA
Shows the input source.
Active Source
1. VGA
NA NA
NA
2. Component
Resolution
Shows the current input resolution.
Shows the current lamp using hours.
NA NA
NA NA
NA
NA
Lamp Hours
The following setup value will be changed after calibration.
Phase
Tracking
Horizontal
Position
Vertical
Adjusts the clock phase to reduce image distortion.
Adjusts the image size to fit the screen
Adjusts the horizontal width of the image.
Adjusts the Vertical width of the image.
Position
17
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Care of the projector
Your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens clean.
Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface.
Use a canister of compressed air to remove dust.
If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the lens
surface.
Cleaning the projector case
Before you clean the case, turn the projector off using the proper shutdown procedure as described in "Shutting down the
projector" on page 8 and unplug the power cord.
To remove dirt or dust, wipe the case with a soft, lint-free cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral pH detergent. Then wipe the case.
Storing the projector
If you need to store the projector for an extended time, please follow the instructions below:
Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please
refer to "Specifications" on page 25 or consult your dealer about the range.
Retract the adjuster feet.
Remove the battery from the remote control.
Pack the projector in its original packing or equivalent.
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent.
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer.
To obtain the lamp hour information:
Press MENU and then press
until the About menu is highlighted. You will see the lamp hours.
18
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Timing of replacing the lamp
When the lamp’s total working time accumulates to over 2000 hours, the On-Screen Display (OSD) will deliver a
message recommending that you replace the lamp. Please contact a service center to replace the lamp as soon as
possible
The following lamp warning displays will remind you to change the lamp.
Status
Message
The lamp has been in operation for 2000 hours. Install a new lamp
for optimal performance. You may continue to operate the
projector.
Replacing the lamp
Type number : RLC-052
To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has
shattered into sharp pieces. Before replacing the lamp, clean the lamp compartment and dispose of cleaning materials. Be
careful of sharp edges in the lamp compartment. Wash hands after lamp replacement.
Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock and fire.
Turn the power off and disconnect the projector from the wall socket before replace the lamp. Follow with below
instruction.. Contact your dealer for details.
Resetting the lamp timer
1.
2.
3.
Press MENU to open the On-Screen Display (OSD) menu
Go to the Advance menu and press Enter.
Press to select Lamp Reset and press Enter.
19
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicators
Light
Status & Description
Power events
Flashing blue (1 sec interval)
Stand-by mode
Blue
Powering up
Blue
Normal operation
Red
This projector needs 60 seconds to cool down.
Lamp events
Flashing blue (10 sec interval)
Thermal events
Purple
This projector will go into hot-ignite by 4 times.
The projector needs 60 seconds to cool down. Or
Please contact your dealer for assistance.
Flashing red (1 sec interval)
20
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
¾ The projector does not turn on.
Cause
Remedy
Plug the power cord into the AC inlet on the projector,
and plug the power cord into the power outlet.
There is no power from the power
cord.
Attempting to turn the projector on
again during the cooling process.
Wait until the cooling down process has completed.
¾ No picture
Cause
Remedy
The video source is not turned on or
connected correctly.
Turn the video source on and check that the signal
cable is connected correctly.
The projector is not correctly
connected to the input signal device.
The input signal has not been
correctly selected.
Check the connection.
Select the correct input signal with the SOURCE key
on the projector or remote control.
Open the lens cover.
The lens cover is still closed.
¾ Blurred image
Cause
Remedy
The projection lens is not correctly
focused.
Adjust the focus of the lens using the focus ring.
The projector and the screen are not
aligned properly.
Adjust the projection angle and direction as well as
the height of the projector if necessary.
Open the lens cover.
The lens cover is still closed.
¾ Remote control does not work
Cause
Remedy
The battery is out of power.
There is an obstacle between the
remote control and the projector.
You are too far away from the
projector.
Replace the battery with a new one.
Remove the obstacle.
Stand within 6 meters of the projector.
21
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Projector specifications
All specifications are subject to be changed without notice.
General
Product name
Model name
Digital Projector
PJD2121
Optical
Resolution
Display system
Lens F/Number
Lamp
800 x 600 SVGA
1-CHIP DMD
F = 2.6
50W lamp
Electrical
Power supply
AC Adaptor 100–240V, Input 19V==4.74A
90 W (Max)
Power consumption
Mechanical
Dimensions
Weight
205 mm (W) x 65 mm (H) x 121 mm (D)
2.2 lbs (1.0 Kg)
Input terminal
Computer input
RGB input
D-Sub 15-pin (female) x 1
Video signal input
VIDEO
RCA jack x 1
Environmental Requirements
Operating temperature
Operating relative
humidity
0°C–40°C at sea level
10%–90% (without condensation)
Operating altitude
• 0–1499 m at 0°C–35°C • 1500–3000 m at 0°C–30°C
22
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
205 mm (W) x 65 mm (H) x 121 mm (D)
Timing chart
Mode
Resolution
640x350
640x350
640x400
640x480
640x480
640x480
640x480
720x400
720x400
800x600
*800x600
800x600
800x600
800x600
V-Sync (Hz)
H Sync (kHz)
31.5
VGA (Expanded)
DOS/Text mode visible
70
85
85
60
72
75
85
70
85
56
60
72
75
85
37.9
37.9
31.5
37.9
37.5
43.3
31.5
37.9
SVGA (Native)
35.2
37.9
48.1
46.9
53.7
23
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
XGA (Compressed)
SXGA (Compressed)
1024x768
1024x768
1024x768
1024x768
1280x1024
1280x1024
1600x1200
640*480
60
70
75
85
60
75
60
67
75
75
75
75
60
60
60
48.4
56.5
60.0
68.7
64
80
UXGA
75
Mac, Apple
35
832x624
49.7
60
1024x768
1152x870
1280x960
1280x800
1440x900
1680x1050
68.68
75
49.67
55.91
65.29
Others**
PC: Full scan
7.4
Compatible/Supportive Modes
Note: the Projector may need minor adjustment in the OSD to get optimized
performance.
1080i
1920x1080
1920x1080
1280x720
1280x720
640x480
30
25
60
50
60
30
25
50
33.75
28.13
45
1080i
720p
720p
480p
480i
37.5
31.5
640x480
15.75
15.75
31.25
576i
720x576
576p
720x576
24
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
IR control table
Key
1st Byte
2nd Byte
3rd Byte
POWER
MENU
83
83
83
83
83
83
83
83
83
83
F4
F4
F4
F4
F4
F4
F4
F4
F4
F4
0x02
0x0F
0x11
0x14
0x16
0x18
0x10
0x04
0x19
0x1A
UP (VOL+)
DOWN (VOL-)
LEFT
RIGHT
ENTER
SOURCE
VIEWMATCH
BLANK
25
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
T=Telephone
Country/Region
Web Site
E-mail
F=Fax
AUS=1800 880 818
Australia/New Zealand
NZ=0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-1202
Canada
Europe/Middle East/Baltic
countries/North Africa
Contact your reseller
T= 852 3102 2900
T= 1800 11 9999
T= 080 333 2131
T= 0800 666 0194
T= 0800 891 6984
T= 800 440 303
Hong Kong
India
Korea
Latin America (Argentina)
Latin America (Brazil)
Latin America (Chile)
Latin America (Columbia)
Latin America (Mexico)
T= 01 800 915 6588
T= 001 800 514 6518
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
Latin America (Peru)
Macau
T= 0800 53458
T= 853 700 303
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-1202
Puerto Rico & Virgin Islands
Singapore/Malaysia/Thailand
South Africa
T= 65 6461 6044
United Kingdom
T (Toll-Free)= 1-800-688-6688
United States
T (Toll)= 1-424-233-2530
F= 1-909-468-1202
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
®
VIEWSONIC PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
Limited Three (3) year General Warranty
Subject to the more limited one (1) year warranty set out below, North and South America: Three (3) years
warranty for all parts excluding the lamp, three (3) years for labor, and one (1) year for the original lamp from
the date of the first consumer purchase; Europe except Poland: Three (3) years warranty for all parts excluding
the lamp, three (3) years for labor, and ninety (90) days for the original lamp from the date of the first consumer
purchase; Poland: Two (2) years warranty for all parts excluding the lamp, two (2) years for labor, and ninety (90)
days for the original lamp from the date of the first consumer purchase.
Limited One (1) year Heavy Usage Warranty:
Under heavy usage settings, where a projector’s use includes more than four (4) hours average daily usage,
North and South America: One (1) year warranty for all parts excluding the lamp, one (1) year for labor, and
ninety (90) days for the original lamp from the date of the first consumer purchase; Europe: One (1) year
warranty for all parts excluding the lamp, one (1) year for labor, and ninety (90) days for the original lamp
from the date of the first consumer purchase.
Other regions or countries: Please check with your local dealer or local ViewSonic office for the warranty
information.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed
lamp only. All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration, failure, or malfunction resulting from:
a. Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, improper maintenance,
unauthorized product modification, or failure to follow instructions supplied with the product.
b. Operation outside of product specifications.
c. Operation of the product for other than the normal intended use or not under normal conditions.
d. Repair or attempted repair by anyone not authorized by ViewSonic.
e. Any damage of the product due to shipment.
f. Removal or installation of the product.
g. Causes external to the product, such as electric power fluctuations or failure.
h. Use of supplies or parts not meeting ViewSonic’s specifications.
i. Normal wear and tear.
j. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please
refer to “Customer Support” page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c)
your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center
or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including
the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be
liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility of
such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact
ViewSonic or your local ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject
to the terms and conditions of the Maintenance Guarantee Card.
under Support/Warranty Information.
4.3: Projector Warranty
PRJ_LW01 Rev. 1h 06-25-07
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Mexico Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole
option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished
parts or components & accessories.
How long the warranty is effective:
3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only.
All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, unauthorized
attempted repair, or failure to follow instructions supplied with the product.
b.Any damage of the product due to shipment.
c. Causes external to the product, such as electrical power fluctuations or failure.
d.Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the
product for an extended period of time.
4. Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached
Customer Support page). You will need to provide your product’s serial number, so please record the product information in
the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your
warranty claim.
For Your Records
Product Name: _______________________________
Document Number: ___________________________
Purchase Date: _______________________________
Model Number: _______________________________
Serial Number: ________________________________
Extended Warranty Purchase? ________________(Y/N)
If so, what date does warranty expire? ______________
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d)
a description of the problem, and (e) the serial number of the product.
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty
of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product,
loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other
commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
Tel: (55) 3605-1099
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV.
Calle Juarez 284 local 2
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
Compumantenimietnos Garantizados, S.A. de C.V.
AV. GREGORIO MENDEZ #1504
COL, FLORIDA C.P. 86040
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: [email protected]
E-Mail: [email protected]
Puebla, Pue. (Matriz):
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
Veracruz, Ver.:
CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas #
419
72160 PUEBLA, PUE.
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: [email protected]
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01-22-91-00-31-67
E-Mail: [email protected]
Chihuahua
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: [email protected]
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: [email protected]
Distrito Federal:
QPLUS, S.A. de C.V.
Av. Coyoacán 931
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail : [email protected]
Guadalajara, Jal.:
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: [email protected]
Guerrero Acapulco
Monterrey:
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Tel: 8129-5103
E-Mail: [email protected]
MERIDA:
ELECTROSER
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: [email protected]
Oaxaca, Oax.:
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Fax: 01(52)95-15-13-67-00
E-Mail. [email protected]
Tijuana:
STD
FOR USA SUPPORT:
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
4.3: ViewSonic Mexico Limited Warranty
PRJ_LW03 Rev. 1A 06-25-07
ViewSonic
PJD2121
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|