SPARE PART AND OPERATION MANUAL
FOOD MIXER
Models W30(A), W40(A), W40P, W60(A) and W60P
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Varimixer warrants its commercial mixers to the original purchaser against defects in material or manufacture for a period of one
year from the date of original purchase, subject to the following exclusions and limitations. The warranties provided by Varimixer do
not apply in the following instances:
EXCLUSIONS
1. In the event that the equipment is improperly installed. Proper installation is the responsibility of the installer, proper installation
procedures are covered in the Varimixer Spare Parts and Operations Manual.
.
2. In the event that the equipment is improperly maintained. Proper maintenance is the responsibility of the user. Proper maintenance
procedures are covered in the Varimixer Spare Parts and Operations Manual.
3. In the event that failure or malfunction of the appliance or any part thereof is caused by abnormal use or is otherwise not attributa-
ble to a defect in material or manufacture.
.
4. In the event that the appliance , by whatever cause, has been materially altered from the condition in which it left the factory.
5. In the event that the rating plate has been altered or removed.
6. On parts which would normally be worn or replaced under normal conditions.
.
7. With regard to adjustments and/or calibrations. Checking of and changes in adjustments and calibrations are the responsibility of
the installer, Proper installation is the responsibility of the installer, proper installation procedures are covered in the Varimixer Spare
Parts and Operations Manual.
.
If any oral statements have been made regarding the appliance, such statements do not constitute warranties and are not part of the
contract of sale. This Limited Warranty constitutes the complete, final and exclusive statement with regard to warranties.
..THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER ..
..WRITTEN, ORAL OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF..
..MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE OR WARRANTY AGAINST LATENT..
..DEFECTS.
LIMITATIONS OF LIABILITY
In the event of warranty claim or otherwise, the sole obligation of Varimixer shall be the repair and/or replacement at the option of
Varimixer, of the appliance or component or part thereof Such repair or replacement shall be the expense of Varimixer except that
travel over 100 miles or two hours, overtime, and holiday charges shall be,, the expense of the purchaser. Any repair or replacement
under this warranty does not constitute an extension of the origin, warranty for any period for the appliance or for any component
part thereof. Parts to be replaced under this warranty will be repaired or replaced at the option of Varimixer with new or functionally
operative parts. The liability of Varimixer on any claim of any kind, including claims based on warranty, expressed or implied, con-
tract, negligence, strict liability or any other theories shall be solely and exclusively the repair or replacement of the product as stated
herein, an such liability shall not include, and purchaser specifically renounces any rights to recover, special, incidental, consequen-
tial or other damages of any kind whatsoever, including, but not limited to, injuries to persons or damage to property, loss of profits
or anticipated profits, or loss of use of the product.
TO SECURE WARRANTY SERVICE
If you claim a defect covered by this Limited Warranty, first direct your claim to the local Authorized Service Agency, giving model,
serial and code numbers, voltage, a description of the problem and your sales slip. If this procedure fails to be satisfactory to you,
you may write to the Varimixer National Service Manager, 5489 Campus Dr, Shreveport, Louisiana 71129; you should include the
information listed above.
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Installation Instructions...................................................................................................2
Operating Instructions.....................................................................................................3
Cleaning-Maintenance....................................................................................................4
Belt Adjustments and Removal.......................................................................................5
Adjusting the Bowl Height...............................................................................................7
Machine Column..........................................................................................................9
Bowl Arms.....................................................................................................................11
Planetary Head.............................................................................................................13
Transmission.................................................................................................................15
Speed Lever Assembly..................................................................................................17
Single Speed Transmission...........................................................................................19
Attachment Drive..........................................................................................................21
Instrument Panel...........................................................................................................23
Bowl Screen..................................................................................................................27
Vegetable Slicer............................................................................................................29
Meat Mincer .................................................................................................................37
Bowl Scraper.................................................................................................................43
Tools and Bowls............................................................................................................47
Bowl Truck....................................................................................................................47
Electrical Diagrams.......................................................................................................49
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this page entirely BEFORE beginning installation.
VARIMIXER INSTALLATION INSTRUCTIONS
UNDER NO CIRCUMSTANCES ARE THE SPEED LEVER, BOWL LIFT LEVER, OR THE BOWL
ARMS TO BE USED TO MOVE THE MIXER INTO PLACE. DAMAGE WILL RESULT TO THE UNIT.
IT IS RECOMMENDED THAT THE TOP LID BE REMOVED BEFORE MOVING THE UNIT.
The mixer must be mounted with the rubber feet, which neutralize both shaking and rusting. Spacers
can be inserted under the mixer’s feet if the floor is uneven. The mixer can be bolted to the floor if
desired.
Before the mixer is connected to power, it should be checked that the voltage and frequency on the
rating plate is correct in relation to the place of installation. A unit labeled 220V 3 Phase will operate
from 208V to 240V 3 phase safely. The rating plate is located on the rear right side of the mixer. The
electrical connection box is located at the top rear of the mixer.
WARNING
Electrical and grounding connections must comply with applicable portions of the National Electrical
Code and/or other local electrical codes................................................................ire
Wire Color Codes
White-Phase 1
Red -Phase 2
Black-Phase 3
Green-Ground
No Neutral is used
1. Lower the bowl lift lever.
2. Remove the bowl and all tools.
3. Raise the bowl lift.
4. Close bowl screen if equipped. 5. Turn timer to 10 minutes and
push “start” .
6. Insure cover is rotating in
the correct direction.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION OF THE MIXER:
A) Open the bowl screen and place the bowl in the bowl
arms. Note: The bowl arms must be in lowest position and
the bowl must be pushed all the way into the bowl
arms.(Fig.3).
B) Place the mixing tool in the bayonet shaft. The pin on
the tool must be turned into the bayonet hole (fig.2).
C) The bowl is raised to working position, ensure that the
bowl is placed correctly. Close the bowl screen. If the mixer
is equipped with a timer, set the mixing time required by
turning the timer (fig 1) clockwise. The mixer will stop auto-
matically, when the time runs out. When the mixer has
timed out, the "procedure for starting after emergency stop"
is used before the mixer is re-started.
D) Start the mixer by pressing the green start button
(fig.1)
The mixer will only start when the bowl is in "up"position,
the bowl screen is closed,and the timer is set to time or
"hold".
E) Turn the speed selector lever (fig. 4) to the rear until
the required speed has been obtained, (notice the recom-
mended maximum speeds on page 3).
F) Before the mixer is stopped, the speed selector lever
must be moved back to lowest speed (fig.4).
G) Stop the mixer by pressing the red stop button (fig.1)
PROCEDURE FOR STARTING AFTER EMERGENCY
STOP:
1) This procedure must be used in cases where the mixer
has been interrupted in high speed.
2) Lower the bowl and remove the tool from the bayonet.
3) Raise the bowl arms, either empty or with the bowl.
4) Close the safety guard, start the mixer and move
the speed selector lever back to lowest speed. Switch off
the mixer. Now the mixer can be started as usual.
OVERLOAD
Do not overload the mixer. Sticky and heavy doughs may
reduce the capacity of the bowl by 75%. The capacity is
further reduced if the speed of the mixing tool is increased
beyond recommended values or if an incorrect mixing tool
is used. Large lumps of fat or cooled ingredients MUST be
cut into small parts before they are placed into the bowl or
damage can occur to the mixing tool(s).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct use of tools:
Maintenance and Lubrication:
The variable speed pulleys must be lubricated regularly, i.e. a
lubrication interval of approx. 60 hours of operation.
Whips should never be struck
against hard objects, this will
decrease the life of the tool.
Lubrication of variable speed pulleys:
-Start the mixer and increase the speed to approx. 50%. Stop
the mixer and open the lid on the top of the mixer. On the top of
each of the two pulley set shafts is a grease nipple (fig. 5 point
1). Press grease through the grease nipples until the grease
gun feels hard to press or until grease comes out between the
shaft and the pulleys.
-Start the mixer, and set the speed back to low ..speed.
-Stop the mixer and fill the grease gun with new grease so that
it is ready for next time.
Recommended applications for tools:
Whip
Beater
Hook
Cream
Egg Whites
Mayonnaise
Cakes
Waffles
Muffins
Pizza
Bread
Donut
and the like. and the like. Doughs and
the like.
Lubrication of other movable parts:
The movable parts of the bowl arms, the shaft and the lifting
rod must also be lubricated with oil. Remove the rear covering
and lubricate the marked points with an oil can. (fig.5 pkt.2)
Cleaning:
The mixer should be cleaned daily or after use.The
mixer should be cleaned with a soft cloth and clean
Grease Types:
water. Sulphonated soaps should be used with caution -Grease for the pulley set shafts: Lubriplate # 1200-2
as they destroy the mixer's lubricants.
-On repair of the planetary head: Grease the toothed wheel and
Never use high pressure cleaning for the mixer.
the toothed rim with Nye Gel 868VH,(PN 868VH), the needle
bearings in the planetary head must not be lubricated with this
Bowls and tools of aluminium must not be washed with type of grease, they should be lubricated with PN Sapphire 2.
strong alkaline detergents (pH not bigger than 9.0).
Do not use any another type of grease than the one stated
here.
The soap suppliers can recommend the correct type of
soap.
-On repair of the attachment drive: Fill the attachment drive with
Tribol Molub 860/150-0, (PN 860/150-0).
The mixer should be unplugged before cleaning to pre-
vent accidental starting while cleaning.
Fig.5
The inside of the beater shaft should be cleaned once
a day with warm, soapy water.
Dough hook Cleaning: Special care
should be given to cleaning the dough
hook. We recommend that it be
cleaned and sanitized in a commercial
dish machine. An alternate cleaning
procedure is to vigorously scrub the
hook with a hot.water and detergent
solution. Use a heavy bristled brush.
After cleaning, sanitize the hook by
rinsing it with a 50 ppm solution of
sodium hypochlorite.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Belt Adjustments and Removal
To remove V-belts or tooth belt:
1. Remove the 4 screws (T) from the control panel.
2. Remove the front control (U) from mixer and let hang from cables.
3. Open lid.
4. Remove nut (J) and washers (H).
5. Remove fork assembly (X).
6. Roll belt (A) off of the the pulleys and remove.
7. Lossen jam nut (E) and tension bolt (F).
8. Loosen bolts (D).
9. Remove 3 V-belts or single tooth belt from planetary pulley (Y) and pedestal assembly (S).
To install V-belts or single tooth belt:
1. Install the 3 V-belts (C) on the pedestal pulley and planetary pulley (Y).
2. Tighten the 2 bolts (D) on the pedestal assembly, insure the v-belts are tight.
3. Install special v-belt (A).
4. Install fork assembly (X).
5. Install washers (G) (H) and nut (J). DO NOT TIGHTEN NUT!
6. On the front pulley set, the stud (K) on the varispeed collar (L) must be placed inside the lower fork (M), and outside
...the fork on the rear pulley set (N).
7. Start the mixer and tighten the nut (J).
8. Using the speed adjustment lever , lower the speed until the belt (A) is 1/8” from the outside edge of the front var-
....speed pulley (S). THIS IS LOW SPEED. Adjust the 2 jamnuts (R) against the fork (X) and tighten. This is your low
....speed setting.
9. Using the speed adjustment lever , increase the speed until the belt (A) is 1/8” from the outside edge of the rear var-
....speed pulley (L). THIS IS HIGH SPEED. Adjust the bolt (O) down against the motor plate and tighten the jamnut. This
....is the high speed setting.
10. Using the speed adjustment lever , lower the speed to low. Turn off mixer and set the speed indicator arrow to 70 ....
......R.P.M.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT OF BOWL HEIGHT:
The distance (X) is measured from the bottom side of the
bayonet hole to the surface on the bowl arms on which the
bowl rests (fig.7a). The bowl arms must be lifted to normal
working position.
W30 = 6 3/8”
(X):
W40 = 6 3/8”
W60 = 6 15/16”
Lower the bowl arms down on a wooden block so that the
weight of the bowl arms are not loading the lifting system.
Loosen the counter nut (1), (fig.7b). Take out the cotter pin
(2). Take out the lifting rod (3). The lifting bolt (4) is now
loose and can be turned out or into the lifting nut (5), until
the correct height of the bowl arms has been reached.
ADJUSTMENT OF BOWL FIXING:
The bowl arms must be raised to normal working position.
Loosen the counter nuts (1) and remove the cotter pins (2).
Turn the bolt (3) until correct fixing of the bowl is achieved.
By turning the bolts out of the extension tube the fixing is
increased. Start by turning one of the bolts half a revolu-
tion.
ADJUSTMENT OF BOWL CENTERING:
Loosen the counter nuts (1) and remove the cotter pins (2).
Turn the bolt (3) until the bowl is in the center of the mixer.
After the fixing of the bowl, one of the bolts must be turned
out of the extension tube and the other into the extension
tube. Use the flat beater to check that the bowl is correctly
centered and turn the planetary head with your hand
before the voltage is connected.
Fig.7A
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
19
16
3
14
15
18
23
17
22
25
26
24
6
10
10
20
27
4
5
29
28
12
13
9
8
30
1.
Bowl Lift Microswitches
1986 - Present
2001- Present
PN 27-172
Pre 1996
PN 2717
1997-2001
401-1
PN 81-173
P
N
2
1
7
73
2
PN 27-172
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE COLUMN
DESCRIPTION
PART NUMBER
W40P
See Figure See Figure See Figure
W30(A)
W40(A)
W60(A)
W60P
1. Bowl Lift Microswitch
2. Mounting Screws
See Figure See Figure
STA 5270
STA 5270
STA 6580
30N-212
STA 5270
STA 6580
30N-212
30N-214.6
15-245
STA 5270
STA 6580
60N-212
STA 5270
STA 6580
60N-212
3. Top Lid Threaded Bushing STA 6580
4. Knee Pad
30N-212
5. Intermediate Piece 6 MM
6. Indicator Arrow
8. Column
30N-214.6 30N-214.6
60N-214.6 60N-214.6
15-245
30N-22
15-245
30N-22
15-245
60N-22
15-245
60N-22
30N-22
9. Lift Lever Bushings
STA 2515
STA 2515
STA 2515
STA 2520
30N214.3
30N-213
STA 5017
STA 5080
STA 5232
27-22.7
STA 2515
STA 2515
10. Bowl Arm Shaft Bushings STA 2520 STA 2520
12. Intermediate Piece 3 MM 30N-214.3 30N-214.3
STA 2520 STA 2520
60N-214.3
60N-213
STA 5017
STA 5080
STA 5232
60-22.7
60N-214.3
60N-213
STA 5017
STA 5080
STA 5232
60-22.7
13. Foot
30N-213
STA 5017
STA 5080
STA 5232
27-22.7
30N-213
STA 5017
STA 5080
STA 5232
27-22.7
15. Lid Screw
16. Access Plate Screw
17. Ground Screw
18. Rear Access Plate
19. Top Lid
27-21
27-21
27-21
60-21
60-21
20. Plug Button Rear Screen
22. Plug Button No Hub
23. Upper NSF Plate Cover
24. Lower NSF Plate Cover
25. Lock Nut NSF Plate
26. Washer
31-306
31-306
31-306
31-306
31-306
15-73
15-73
15-73
15-73
15-73
31-270
31-270
31-270
61-270
61-270
31-271
31-271
31-271
61-271
61-271
STA 5834
STA 6027
31-148M4
STA 5834
STA 6027
31-148M4
STA 5834
STA 6027
31-148M4
STA 5834
STA 6027
61-148M4
STA 5834
STA 6027
61-148M4
27. Motor Mount
28. Motor Mount Bolt
29. Lock Washer
STA 5625
STA 6056
STA 5625
STA 6056
STA 5625
STA 6056
STA 5625
STA 6056
STA 5625
STA 6056
30. Roll Pin
30-70.1
30-70.1
30-70.1
30-70.1
30-70.1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
9
3
15
13
16
8
11
16
17
12
21
15
18
19
22
23
2
18
25
26
27
15
16
24
28
29
30
5
3
2
7
6
1, 1A, 1B, 1C
4
5
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BOWL ARMS
PART NUMBER
FIG.
NO.
DESCRIPTION
W30 (A)
27-23
W40 (A)
40-23
W40P
40-23
W60 (A)
60-23
W60P
60-23
1.
Bowl Arm Left (Pre 1993)
1A. Bowl Arm Right (Pre 1993)
27-24
40-24
40-24
60-24
60-24
1B.
1C.
2.
Bowl Arm Left
Bowl Arm Right
Shock Absorber
Crank Arm
30N-23
30N-24
40P-600M
27-63
40N-23
40N-23
40N-24
40P-600M
27-63
60N-23
60N-24
60-600M
60-63
60N-23
60N-24
60-600M
60-63
40N-24
40P-600M
27-63
3.
4.
Bowl Arm Shaft
Lifting Rod Assembly
Bowl Lift Lever
Extension Tube Assembly
Red Ball
31-68
31-68
31-68
61-68
61-68
5.
30-65M
27-62M
30-69M
STA 3308
STA 2020
STA 6044
STA 3407
15-65
30-65M
27-62M
30-69M
ST A3308
STA 2020
STA 6044
STA 3407
15-65
30-65M
27-62M
30-69M
STA 3308
STA 2020
STA 6044
STA 3407
15-65
60-65M
60-62M
60-69M
STA 3308
STA 2020
STA 6044
STA 3407
15-65
60-65M,
60-62M
60-69M
STA 3308
STA 2020
STA 6044
STA 3407
15-65
6.
7.
8.
9.
Key B6 x 6 x 15
Washer (s)
11.
12.
13.
15.
16.
17.
18.
19.
21.
22.
23.
24.
25.
26.
27.
28.
Snap Ring
Lifting Nut
Cotter Pin
STA 6205
STA 5827
30-69
STA 6205
STA 5827
30-69
STA 6205
STA 5827
30-69
STA 6205
STA 5827
60-69
STA 6205
STA 5827
60-69
JamNut
Extension Tube
Shoulder Bolt
Eyebolt
STA 5690
30-80
STA 5690
30-80
STA 5690
30-80
STA 5690
30-80
STA 5690
30-80
Lifting Bolt
27-83
27-83
27-83
60-83
60-83
C-Clip
STA 3580
15-67
STA 3580
15-67
STA 3580
40P-67
STA 2522
STA 5088
31-128
STA 3580
15-67
STA 3580
15-67
Lift Bolt Pin
Bowl Arm Bushing
Bowl Arm Roller Screw
Bowl Arm Roller
Bowl Arm Roller Shaft
Snap Ring
STA 2522
STA 5088
31-128
STA 2522
STA 5088
31-128
STA 2525
STA 5088
31-128
STA 2525
STA 5088
31-128
31-127
31-127
31-127
31-127
31-127
STA 3467
140-173
81-173
STA 3467
140-173
81-173
STA 3467
140-173
81-173
STA 3460
140-173
81-173
STA 3460
140-173
81-173
29. White Bowl Arm Microswitch
30. Black Bowl Arm Microswitch
12
Download from Www.Somanuals.com. All Manuals Search And Download.
17
18
1
19
20
2
3
21
18
4
22
17
23
5
6
24
25
26
27
7
8
9
10
6
28
29
30
29
33
31
32
5
34
35
11
34
36
37
12
13
39
38
14
40
15
16
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PLANETARY HEAD
PART NUMBER per MODEL NUMBER
FIG.
NO.
DESCRIPTION
W30 (A)
W40 (A)
W40P
W60 (A)
W60P
0
1.
1A.
1B.
2.
3.
4.
4A.
4B.
5.
V-Belt (60 HZ) 3 per unit
V-Belt (50 HZ) 3 per unit
V-Belt Single Cog Belt
Snap Ring
40-90.1 (A29)
40-90 (710LA)
N/A
STA 3425
STA 6043
40-129A
40-129
40-90.1 (A29)
40-90 (710LA)
N/A
STA 3425
STA 6043
40-129A
40-129
40-90.1 (A29)
40-90 (710LA) 60-90 (SPA 850)
60-90.1 (A35)
60-90.1 (A35)
60-90
40P-90.1
STA 3425
STA 6043
40-129A
40-129
N/A
STA 3427
STA 6047
60-129A
60-129
N/A
STA 3427
STA 6047
60-129A
60-129
N/A
60-99
Washer
Planetary Pulley (60 HZ )
Planetary Pulley (50 HZ )
Pulley Single Cog Belt
Bearing
N/A
40-99
N/A
40-99
40P-129A
40-99
N/A
60-99
6.
7.
8.
9.
Snap Ring
Bolt M10 x 40 MM
Washer
STA 3520
STA 5346
STA 6057
30-3
STA 3526
STA 5346
STA 6057
40-3
STA 3526
STA 5346
STA 6057
40-3
STA 3528
STA 5346
STA 6057
60-3
STA 3528
STA 5346
STA 6057
60-3
Main Bearing
10.
11.
12.
Distance Tube
Gear Wheel Rim
Screw for Grey Cover
40-141
30-1
STA 5044
30-22.9P
30-2M
30-3M
30-2.1M
40-34
STA 3520
STA 3472
30-36
40-100
30-96
STA 2030
30-31
30-32
30-30
See Item 32
30-2
STA 6055
STA 5640
30-108R
30-101
STA 5641
40-34
30-97
STA 3522
STA 2038
30-33D
30-272
40-141
40-1
STA 5044
40-22.9P
40-2M
40-3M
40-2.1M
40-34
STA 3520
STA 3474
40-36
40-100
40-96
STA 2030
40-31
40-32
40-30
See Item 32
40-2
STA 6057
STA 5645
40-108R
40-101
STA 5646
40-34
40-97
STA 3526
STA 2040
40-33D
40-272
40-141
40-1
STA 5044
40-22.9P
40-2M
40-3M
40-2.1M
40-34
STA 3520
STA 3474
40-36
40-100
40-96
STA 2030
40-31
40-32
40-30
See Item 32
40-2
STA 6057
STA 5645
40-108R
40-101
STA 5646
40-34
40-97
STA 3526
STA 2040
40-33D
40-272
40-209
60-141
60-1
STA 5044
60-22.9P
60-2M
60-3M
60-2.1M
60-37
STA 3523
STA 3474
60-36
60-100
60-96
STA 2030
60-31
60-32N
60-30
See Item 32
60-2
STA 6057
STA 5646
60-108R
40-101
60-141
60-1
STA 5044
60-22.9P
60-2M
60-3M
60-2.1M
60-37
STA 3523
STA 3474
60-36
60-100
60-96
STA 2030
60-31
60-32N
60-30
See Item 32
60-2
STA 6057
STA 5646
60-108R
40-101
13. Planetary Cover Grey Plastic
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
Planetary Head Assembly
Plan. Upper Half Assembly
Plan. Lower 1/2 Assembly
Distance Piece
Snap Ring
Snap Ring
Eccentric Disc
Bearing
Needle Bearing
Key 8 x 7 x 20 mm
Upper Rim Pinion
Lower Rim Pinion
Main Shaft
Bearing Race
Lower Half Eccentric Head
Lockwasher
Bolt
Seal
Needle Bearing w/ race
Bolt
STA 5650
40-34
40-97
STA 3526
STA 2034 (2)
60-33D
60-272
STA 5650
40-34
40-97
STA 3526
STA 2034 (2)
60-33D
60-272
Distance Piece
Bearing
Snap Ring
Key(s)
Bayonet Shaft
S/S Headcap
Black Rubber Ring
40-209
60-209
30-209
60-209
14
Download from Www.Somanuals.com. All Manuals Search And Download.
48
50
22
23
10
31
34
1
45
30
20
37
41
2
3
6
37
38
46
40
28
29
5
29
19
4
39
37
50
44
21
14
11
25
25
24
8
32
49
47
43
33
42
51
9
35
7
52
36
12
13
54
17
18
16
15
13
12
11
55
26
27
53
56
57
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSMISSION
PART NUMBER per MODEL NUMBER
FIG.
NO.
DESCRIPTION
W30 (A)
W40 (A)
W40P
W60 (A)
W60P
0
1.
Washer
Upper Pulley for Pedestal
Pin
STA 6018
15-13M
30-285
STA 6018
15-13M
30-285
STA 6018
15-13M
30-285
STA 6018
60-13M
60-285
STA 6018
60-13M
60-285
2.
3.
4.
Bearing
15-103
15-103
15-103
15-103
15-103
5.
6.
7.
7A .
Lower Pulley
Bushing
V-Belt Pulley
Single Cog Belt Pulley
Shaft
15-15M
STA 2505
27-128
N/A
15-41
15-15M
STA 2505
27-128
N/A
15-41
15-15M
STA 2505
27-128
40P-128
15-41
60-15M
STA 2505
60-128
N/A
60-15M
STA 2505
60-128
N/A
8.
60-41
60-41
9.
Key
Grease Nipple
Snap Ring
Bearing
Snap Ring
Fork Ring
Distance Piece
Arm for Bearing
Bolt
Washer
Vari-Drive Belt
Bearing
Reducer
Grease Nipple
STA 2022
STA 3220
STA 3410
27-102
STA 3514
15-17
15-143
30-6
STA 5348
STA 6010
27-91
15-103
15-156
STA 3220
STA 6018
See figure 26
30-285
STA 2022
STA 3220
STA 3410
27-102
STA 3514
15-17
15-143
30-6
STA 5348
STA 6010
27-91
15-103
15-156
STA 3220
STA 6018
See figure 26
30-285
STA 2022
STA 3220
STA 3410
27-102
STA 3514
15-17
15-143
30-6
STA 5348
STA 6010
27-91
15-103
15-156
STA 3220
STA 6018
See figure 26
30-285
STA 2022
STA 3220
STA 3410
27-102
STA 3514
15-17
15-143
30-6
STA 5348
STA 6010
60-91
15-103
15-156
STA 3220
STA 6018
See figure 26
60-285
STA 2022
STA 3220
STA 3410
27-102
STA 3514
15-17
15-143
30-6
STA 5348
STA 6010
60-91
15-103
15-156
STA 3220
STA 6018
See figure 26
60-285
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
Washer
Lower Motor Pully
Pin for Motor Pulley
26. Lower Motor Pulley Assembly
27. Upper Motor Pulley Assembly
15-13.1M
15-15M
See figure 27
STA 2505
15-17
15-13.1M
15-15M
See figure 27
STA 2505
15-17
15-13.1M
15-15M
See figure 27
STA 2505
15-17
60-13.1M
60-15.1M
See figure 27
STA 2505
15-17
60-13.1M
60-15.1M
See figure 27
STA 2505
15-17
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
Upper Pulley
Bushing
Fork Ring
Clamping Ring
Key
Motor plate mount screw
Screw
Motor Mount Plate
Rack Bracket
Nut
Washer Nut
Stud Bolt Low Speed
Trestle
27-227
27-227
27-227
27-227
27-227
STA 2011
STA 5018
STA 5612
60-61
STA 2011
STA 5018
STA 5612
60-61
STA 2011
STA 5018
STA 5612
60-61
STA 2011
STA 5018
STA 5612
60-61
STA 2011
STA 5018
STA 5612
60-61
15-18
15-18
15-18
15-18
15-18
STA 5812
STA 5895
30N-305
20-26
STA 5444
STA 6010
STA 5345
27-16
STA 5812
STA 5895
30N-305
20-26
STA 5444
STA 6010
STA 5345
27-16
STA 5812
STA 5895
30N-305
20-26
STA 5444
STA 6010
STA 5345
27-16
STA 5812
STA 5895
30N-305
20-26
STA 5444
STA 6010
STA 5345
27-16
20-19
40P-275
15-46
STA 5815
STA 3407
STA 6040
STA 5433
STA 6026
60-59M
STA 5812
STA 5895
30N-305
20-26
STA 5444
STA 6010
STA 5345
27-16
20-19
40P-275
15-46
STA 5815
STA 3407
STA 6040
STA 5433
STA 6026
60-59M
Stop Bolt High Speed
Washer
Bolt
Front Fork
Rear Fork
Spring
20-19
20-275
15-46
20-19
20-275
15-16
20-19
40P-275
15-46
Rack
Nut
STA 5815
STA 3407
STA 6040
STA 5433
STA 6026
15-59M
15-13M
15-15M
27-6M
STA 5815
STA 3407
STA 6040
STA 5433
STA 6026
15-59M
15-13M
15-15M
27-6M
STA 5815
STA 3407
STA 6040
STA 5433
STA 6026
15-59M
15-13M
15-15M
27-6M
Snap Ring
Belt Tension Washers
Bolt
Washer
Motor Pulley Assembly
55. Upper Center Pulley Assembly
56. Lower Center Pulley Assembly
60-13M
60-15M
60-6M
60-13M
60-15M
60-6M
Center Pulley Assembly
57.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1
4
2
6
3
5
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED LEVER ASSEMBLY
PART NUMBER per MODEL NUMBER
FIG.
NO.
0
DESCRIPTION
W30 (A)
W40 (A)
W40P
W60 (A)
W60P
1.
2.
3.
4.
5.
6.
Speed Lever
Disc with Arrow
White Clamp
Black Knob
Snap Ring
30N-47M
30N-47.10
30N-47.20
STA 3306
STA 3414
STA 5247
40N-47M
30N-47.10
30N-47.20
STA 3306
STA 3414
STA 5247
40N-47M
30N-47.10
30N-47.20
STA 3306
STA 3414
STA 5247
60N-47M
30N-47.10
30N-47.20
STA 3306
STA 3414
STA 5247
60N-47M
30N-47.10
30N-47.20
STA 3306
STA 3414
STA 5247
Screw
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SYSTEM FOR MODEL W40PI AND W60PI
SPECIAL SINGLE SPEED TRANSMISSION
5
1
6
2
7
8
3
9
4
10
12
13
17
14
16
15
13
12
11
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SINGLE SPEED TRANSMISSION
PART NUMBER
FIG.
NO.
0
DESCRIPTION
W40PI
W60PI
1.
2.
3.
4.
Motor Pulley
Screw
Motor Plate
N/A
33V315
STA 5018
60-61
33V315
STA 5018
60-61
N/A
N/A
5.
6.
7.
8.
Belts
3VX400
33V80
STA 3410
15-41
STA 2022
27-128
STA 3410
27-102
STA 3514
STA 6010
15-143
30-6
STA 5348
3VX425
33V80
STA 3410
60-41
STA 2022
60-128
STA 3410
27-102
STA 3514
STA 6010
15-143
30-6
STA 5348
Center Pulley
Snap Ring
Pedestal Shaft
Key
Pulley
Snap Ring
Bearing
Snap Ring
Washer
Distance Tube
Arm for Bearing
Bolt
9.
10.
11.
12.
13.
14.
15.
16.
17.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
17
22
4
32
9
16
14
15
6
31
5
3
19
23
18
2
19
21
20
18
10
20,12
17
11,12
13,12
8
7
7A
26
26A
29
27
1
30
33
33A
33B
33C
33D
24
25
25A
IDENTIFYING A #17 HUB VERSUS A #12 HUB
35
35A
2”
I.D.
1.5”
I.D
#12
#17
.
THIS AFFECTS ITEM NUMBERS:
7 , 7A
25, 25A
26,26A
28, 28A
34 AND 35
34
34A
PLEASE DETERMINE HUB SIZE BEFORE
ORDERING PARTS
36
21
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTACHMENT DRIVE GEARBOX
PART NUMBER
FIG.
NO.
DESCRIPTION
W30 (A)
W40 (A)
W40P
W60 (A)
W60P
0
1.
Bearing Hub
Wormwheel
Gear Case
15-5
20-9
15-10
15-5
20-9
15-10
15-5
20-9
15-10
15-5
20-9
15-10
15-5
20-9
15-10
2.
3.
4.
5.
6.
Gear Case Cover
Worm Gear
Gear Shaft
15-11
20-49
20-52
15-11
20-49
20-52
15-11
20-49
20-52
15-11
20-49
20-52
15-11
20-49
20-52
7.
7A.
8.
9.
Attachment Drive Shaft # 17
Attachment Drive Shaft # 12
Key
15-50
30-50
STA 2032
20-104
20-107
15-50
30-50
15-50
30-50
15-50
30-50
15-50
30-50
STA 2032
20-104
20-107
Use RTV
Use RTV
Use RTV
STA 2007
STA 2011
STA 3410
STA 5018
15-105
STA 5433
STA 5908
STA 6020
STA 6054
STA6056
15-211
15-214
312C
15-8
30-8
STA 5322
STA 5561
4R-125
STA 6056
STA 6316
60-61
STA 2032
20-104
20-107
Use RTV
Use RTV
Use RTV
STA 2007
STA 2011
STA 3410
STA 5018
15-105
STA 5433
STA 5908
STA 6020
STA 6054
STA6056
15-211
15-214
312C
15-8
30-8
STA 5322
STA 5561
4R-125
STA 6056
STA 6316
60-61
STA 2032
20-104
20-107
Use RTV
Use RTV
Use RTV
STA 2007
STA 2011
STA 3410
STA 5018
15-105
STA 5433
STA 5908
STA 6020
STA 6054
STA6056
15-211
15-214
312C
15-8
30-8
STA 5322
STA 5561
4R-125
STA 6056
STA 6316
60-61
STA 2032
20-104
20-107
Use RTV
Use RTV
Use RTV
STA 2007
STA 2011
STA 3410
STA 5018
15-105
STA 5433
STA 5908
STA 6020
STA 6054
STA6056
15-211
15-214
312C
15-8
30-8
STA 5322
STA 5561
4R-125
STA 6056
STA 6316
60-61
Bearing
Seal
Gasket
Gasket
Gasket
Key
Key
Snap Ring
Screw
Bearing
Bolt
Seal Washer
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
25A.
26.
26A.
27.
28.
28A.
29.
30.
31.
32.
33.
33A.
Use RTV Silicone
Use RTV Silicone
Use RTV Silicone
STA 2007
STA 2011
STA 3410
STA 5018
15-105
STA 5433
STA 5908
STA 6020
STA 6054
STA6056
15-211
15-214
312C
15-8
30-8
STA 5322
STA 5561
4R-125
STA 6056
STA 6316
60-61
Washer
Washer
Lock Washer
Rubber Ring
End Cover #17
End Cover #12
Hub #17
Hub #12
Bolt
Thumbscrew #17
Thumbscrew #12
Washer
Roll Pin #17 Hub Only
Motor Mount Plate
Motor Pulley Assembly
Motor 2HP 1 phase 115V
Motor 2HP 1 phase 230V
15-59M
15-59M
N/A
30-85.62
60-85.52
30-85.52
N/A
15-59M
N/A
60-85.62
60-85.52
60-85.52
N/Ac
60-59M
N/A
60-85.52
60-85.52
60-85.52
N/A
60-59M
N/A
N/A
N/A
30-85.62
30-85.62
60-85.52
30-85.52
N/A
33B. Motor 3HP 3 phase 208V-240V
33C. Motor 3HP 3 phase 480V
33D. Motor 4HP 3 phase 208V-240V
33E.
34.
34A.
35.
35A.
N/A
100-85.50
100-85.10
30-10.5M
30-10.6M
15-5M
Motor 4HP 3 phase 480V
Att. Drive Assembly #17
Att. Drive Assembly #12
Att. Shaft Assembly #17
Att. Shaft Assembly #12
Gear Cover Assembly
cccc
cccc
ccc
cccc
30-10.5M
30-10.6M
15-5M
30-5M
15-11M
30-10.5M
30-10.6M
15-5M
30-5M
15-11M
30-10.5M
30-10.6M
15-5M
30-5M
15-11M
30-10.5M
30-10.6M
15-5M
30-5M
15-11M
30-5M
15-11M
36.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3
1
5
6
4
9
120
11
7
2
14
12
15
16
17
18
19
20
21
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL PANEL 1985 - JUNE 1998
PART NUMBER
FIG.
NO.
DESCRIPTION
W30 (A)
W40 (A)
W40P
W60 (A)
W60P
0
1.
Electrical Control Assembly
208-240V 3 Phase
Electrical Control Assembly
230V 1 Phase
Timer Assembly 208-240V
Timer Assembly 480V
Start Button Green
Stop Button Orange
Pilot Light
40P-149M
3
30-149M
40P-149M
3
30-149M
40P-149M
3
30-149M
40P-149M
3
30-149M
40P-149M
3
30-149M
1a
2.
2.
3.
3A.
4.
5.
6.
7.
3.
3.
3.
3.
3.
30-188.15M
27-188.1
30-174
30-188.15M
27-188.1
30-174
30-188.15M
27-188.1
30-174
30-188.15M
27-188.1
30-174
30-175
27-186
30-188.15M
27-188.1
30-174
30-175
27-186
27-149
N/A
30-175
27-186
27-149
N/A
30-175
27-186
27-149
N/A
30-175
27-186
27-149
N/A
Front Panel
27-149
N/A
8.
N/A
9.
Timer Scale
Screw
Timer Knob
Screw
Cable Inlet
30-190
STA 5232
30-189
30-190
STA 5232
30-189
30-190
STA 5232
30-189
30-190
STA 5232
30-189
30-190
STA 5232
30-189
STA 5627
STA 3000
STA 3010
20-88.24
20-88.21
N/A
10.
11.
12.
13.
14.
STA 5627
STA 3000
STA 3010
20-88.22
20-88.21
20-88.24
100-88.30
20-88.45
20-88.4
20-88.91
100-88.5
100-88.4
STA 5080
STA 5614
STA 6131
STA 5614
27-152
STA 5627
STA 3000
STA 3010
20-88.22
20-88.21
20-88.24
100-88.30
20-88.45
20-88.4
20-88.91
100-88.5
N/A
STA 5080
STA 5614
STA 6131
STA 5614
27-152
STA 5627
STA 3000
STA 3010
20-88.22
20-88.21
20-88.24
100-88.30
20-88.45
20-88.4
20-88.91
100-88.5
N/A
STA 5080
STA 5614
STA 6131
STA 5614
27-152
STA 5627
STA 3000
STA 3010
20-88.22
20-88.21
20-88.24
100-88.30
20-88.45
20-88.4
20-88.91
100-88.5
N/A
STA 5080
STA 5614
STA 6131
STA 5614
27-152
Nut
15. Thermal Overload 3 Ph. 220V
15A. Thermal Overload 3 Ph. 480V
15B. Thermal Overload 1 Ph. 230V
15C. Thermal Overload 1 Ph. 115V
16.
17.
17A.
17B.
17C.
18.
N/A
Auxilary Start Switch
Contactor 3 Ph. 220V
Contactor 3 Ph. 480V
Contactor 1 Ph. 230V
Contactor 1 Ph. 115V
Screw
Screw
Plug Button
Screw
Contactor Bracket
20-88.45
100-88.5
20-88.91
N/A
N/A
STA 5080
STA 5614
STA 6131
STA 5614
27-152
19.
20.
21.
22.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
1
4
5
8
7
6
9
12
10
11
16
13
14
15
18
17
19
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL PANEL JULY 1998 - PRESENT
PART NUMBER
FIG.
NO.
DESCRIPTION
W30 (A)
W40 (A)
W40P
W60 (A)
W60P
0
1.
Front Panel
Start Switch Assembly
Stop Switch Assembly
Timer Assembly 220V
Timer Scale
30N-149
31-174.2
31-174.3
30-188.15
30-190
30N-149
31-174.2
31-174.3
30-188.15
30-190
30N-149
31-174.2
31-174.3
30-188.15
30-190
30N-149
31-174.2
31-174.3
30-188.15
30-190
30N-149
31-174.2
31-174.3
30-188.15
30-190
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
15A.
15B.
15C.
Screw
Nut
Cable Inlet
Cable Inlet
STA 5232
STA 5897
STA 3000
STA 3000
31-152
STA 3010
30-189
31-457
STA 5232
20-88.4
STA 5232
STA 5897
STA 3000
STA 3000
31-152
STA 3010
30-189
31-457
STA 5232
20-88.4
STA 5232
STA 5897
STA 3000
STA 3000
31-152
STA 3010
30-189
31-457
STA 5232
20-88.4
STA 5232
STA 5897
STA 3000
STA 3000
31-152
STA 3010
30-189
31-457
STA 5232
20-88.4
STA 5232
STA 5897
STA 3000
STA 3000
31-152
STA 3010
30-189
31-457
STA 5232
100-88.5
20-88.91
N/A
Cover
Nut
Timer Knob
Grounding Clamp
Screw
Contactor 3 Ph. 220V
Contactor 3 Ph. 480V
Contactor 1 Ph. 230V
Contactor 1 Ph. 115V
20-88.91
100-88.5
N/A
20-88.91
100-88.5
N/A
20-88.91
100-88.5
N/A
20-88.91
100-88.5
N/A
N/A
16. Thermal Overload 3 Ph. 220V
16A. Thermal Overload 3 Ph. 480V
16B. Thermal Overload 1 Ph. 230V
16C. Thermal Overload 1 Ph. 115V
20-88.22
20-88.21
20-88.24
100-88.30
STA 6483
STA 5080
20-88.47
20-88.22
20-88.21
20-88.24
100-88.30
STA 6483
STA 5080
20-88.47
20-88.22
20-88.21
20-88.24
100-88.30
STA 6483
STA 5080
20-88.47
20-88.22
20-88.21
20-88.24
100-88.30
STA 6483
STA 5080
20-88.47
20-88.24
20-88.21
N/A
N/A
17.
18.
19.
Screw
Screw
Auxiliary Start Switch
STA 6483
STA 5080
20-88.47
26
Download from Www.Somanuals.com. All Manuals Search And Download.
9
9
15
14
17
18
11
16
10
8
13
16
18
1
2
4
12
7
6
3
5
27
Download from Www.Somanuals.com. All Manuals Search And Download.
BOWL SCREEN 1993 - PRESENT
PART NUMBER
FIG.
NO.
0
DESCRIPTION
W30 (A)
W40 (A)
W40P
W60 (A)
W60P
1.
2.
3.
4.
5.
6.
7.
8.
Bowl Screen Kit
Nut
225/30A
STA 5810
STA 3307
STA 6056
225/30F
225/40A
STA 5810
STA 3307
STA 6056
225/40F
225/40A
STA 5810
STA 3307
STA 6056
225/40F
225/60
225/60
STA 5810
STA 3307
STA 6056
225/60F
56G20-280
225/60R
56SN30-23
STA 5665
56P30-15
STA 5251
56G30-26
56SN20-30
STA 5819
STA 5250
56SN30-24
56SN30-22
56SN30-21
STA 5810
STA 3307
STA 6056
225/60F
56G20-280
225/60R
56SN30-23
STA 5665
56P30-15
STA 5251
56G30-26
56SN20-30
STA 5819
STA 5250
56SN30-24
56SN30-22
56SN30-21
Knob
Lock Washer
Bowl Screen Front
Chute
Bowl Screen Rear
Cam
Set Screw
Bracket Assembly
Screw
56G20-280
225/30R
56G20-280
225/40R
56G20-280
225/40R
56SN30-23
STA 5665
56P30-15
STA 5251
56G30-26
56SN20-30
STA 5819
STA 5250
56SN30-24
56SN30-22
56SN30-21
56SN30-23
STA 5665
56P30-15
STA 5251
56G30-26
56SN20-30
STA 5819
STA 5250
56SN30-24
56SN30-22
56SN30-21
56SN30-23
STA 5665
56P30-15
STA 5251
56G30-26
56SN20-30
STA 5819
STA 5250
56SN30-24
56SN30-22
56SN30-21
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Nut
Microswitch
Jam Nut
Screw
Nut for Bushing
Notched Cam
Body Bushing
28
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
W60 / W60P
BOWL SCRAPER 1985-2000 (SCREW TYPE)
W30
42R30-101M
224/30A
W40 / W40P
42R40-101M
224/40A
1
2
3
SCRAPER HOLDER
BOWL SCRAPER
42R60-101M
224/60
BOWL SCRAPER
(DOWNSIZE)
224/15
224/20B
224/30B
4
5
HOLDER WITH BLADE
42R30-102
42R40-102
42R60-102
HOLDER WITH BLADE
(DOWNSIZE)
42R30A-102
42R40A-102
42R60A-102
6
7
NYLON BLADE W/SCREWS
42RN30-104
42R40-104
42R60-104
NYLON BLADE W/SCREWS
(DOWNSIZE)
42RN30A-104
42R40A-104
42R60A-104
44
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
KEYHOLE BOWL SCRAPER 2000-
Fig. No.
Description
Order Number
W30
Order Number
W40 / W40P
Order Number
W60 / W60P
1
2
3
SCRAPER HOLDER
BOWL SCRAPER
42R30-101M
224/30A
42R40-101M
224/40A
42R60-101M
224/60
BOWL SCRAPER
(DOWNSIZE)
224/15
224/20B
224/30B
4
5
HOLDER WITH BLADE
42R30-202
42R40-202
42R60-202
HOLDER WITH BLADE
(DOWNSIZE)
42R30A-202
42R40A-202
42R60A-202
6
7
NYLON BLADE
42RN30-204
42RN30A-204
42R40-204
42R60-204
NYLON BLADE
(DOWNSIZE)
42R40A-204
42R60A-204
46
Download from Www.Somanuals.com. All Manuals Search And Download.
8
5
11
6 , 7
11
3 , 4
11
1 , 2
9 , 10
11
11
16 , 17
12 , 13
14 , 15
18 , 19
22
23
24
20 , 21
26
27 , 28
29
30
47
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTACHMENTS AND OPTIONAL PRODUCTS
PART NUMBER
FIG.
NO.
0
DESCRIPTION
W30 (A)
W40 (A)
W40P
W60 (A)
W60P
1.
2.
3.
Stainless Steel Bowl (Standard)
Stainless Steel Bowl (Downsize)
Dough Hook (Single Pin)
203/30A
203/15
213/30A
213/15
30-79
213/30D
213/15
203/40A
203/20A
213/40A
213/20A
40-79
213/40D
213/20B
40-79D
203/40A
203/20A
213/40A
213/20A
40-79
213/40D
213/20B
40-79D
203/60
203/30B
213/60
213/30B
60-79
213/60D
213/30B
60-79D
203/60
203/30B
213/60
213/30B
60-79
213/60D
213/30B
60-79D
4. Dough Hook (Single Pin,downsize)
5.
6.
7. Dough Hook (Single Pin,downsize)
8.
Tool Pin (Single)
Dough Hook (Double Pin)
Tool Pin (Double)
30-79D
9.
Flat Beater (Aluminum)
205/30A
205/15
STA 6261
207/30A
207/15
221/30A
N/A
209/30A
N/A
204/30A
204/15
205/40A
205/20B
STA 6261
207/40A
207/20B
221/40A
N/A
205/40A
205/20B
STA 6261
207/40A
207/20B
221/40A
N/A
205/60
205/60
10. Flat Beater (Downsize, Aluminum)
205/30B
STA 6263
207/60
207/30B
221/60
221/30B
209/60
209/30B
204/60
204/30B
215/60
215/30B
22R270
STA 6513
STA 5602
22R30-40
STA 5608
22R140.1-5W
22R140.1-1W
22R30-520
22R150-520
STA 5131
205/30B
STA 6263
207/60
207/30B
221/60
221/30B
209/60
209/30B
204/60
204/30B
215/60
215/30B
22R270
STA 6513
STA 5602
22R30-40
STA 5608
22R140.1-5W
22R140.1-1W
22R30-520
22R150-520
STA 5131
11.
12.
13.
14.
Tool Pin
Wire Whip
Wire Whip (Downsize)
Wire Whip (Heavy Duty)
15. Wire Whip (Downsize, Heavy Duty)
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
29A
30.
Wing Whip
Wing Whip (Downsize)
S/S Flat Beater
209/40A
N/A
209/40A
N/A
204/40A
204/20B
215/40A
215/20B
22R270
STA 6513
STA 5602
22R30-40
STA 5608
22R140.1-4W
22R140.1-1W
22R30-520
22R150-520
STA 5131
204/40A
204/20B
215/40A
215/20B
22R270
STA 6513
STA 5602
22R30-40
STA 5608
22R140.1-4W
22R140.1-1W
22R30-520
22R150-520
STA 5131
S/S Flat Beater (Downsize)
Bowl Truck
215/30A
215/15
22R270
Bowl Truck (Downsize Bowl)
Bowl Truck Handle
Plug Button
STA 6513
STA 5602
22R30-40
STA 5608
22R140.1-1W
22R140.1-2W
22R30-520
22R150-520
STA 5131
Set Screw
Bowl Truck Frame
Screw
Spacer (For Standard Bowl)
Spacer (For Downsize Bowl)
Castor
Castor f/ Krispy Kreme
Bolt
48
Download from Www.Somanuals.com. All Manuals Search And Download.
1985 - June 1998
1 Phase
49
Download from Www.Somanuals.com. All Manuals Search And Download.
1985 - June 1998
3 Phase
50
Download from Www.Somanuals.com. All Manuals Search And Download.
1998 - Present
1 Phase
51
Download from Www.Somanuals.com. All Manuals Search And Download.
1998 - Present
3 Phase
52
Download from Www.Somanuals.com. All Manuals Search And Download.
5489 Campus Drive
Shreveport LA 71129
(800) 222-1138
(318) 635-3131 Fax
Download from Www.Somanuals.com. All Manuals Search And Download.
|