Owner’s Manual
Dual Display DVI/USB KVM Switch
with Audio and Peripheral Sharing
Models: B004-2DUA2-K, B004-2DUA4-K
Package Contents
System Requirements
Features
2
2
3
Safety Instructions
Installation
6
8
Basic Operation
12
20
21
22
23
Firmware Upgrade
Factory Default Settings
Specifications
Warranty and Warranty Registration
Copyright © 2013 Tripp Lite. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd
1
9/10/2013 4:45:00 PM
Features
• 2- and 4-Port Dual Display DVI/USB KVM switch with 2.1 channel surround-sound
audio and USB 2.0 peripheral sharing
• Quad-View Mode allows computers with four DVI output ports to share KVM, audio and
USB peripherals by connecting two Dual Display KVM switches together
• Built-in 2-Port USB 2.0 hub allows USB devices to be shared amongst computers
connected to the KVM switch
• 3.5 mm Mini Stereo Speaker and Microphone jacks allow a single microphone to
provide audio input to each of the connected computers, and let you listen to the
audio output of each computer on a single set of speakers
• Additional console audio jacks are conveniently located on the front panel of the
KVM switch, making them ideal for use with IP phones
• The KVM, USB and Audio can be switched independently of each other. For example,
you can access one computer while at the same time listening to audio from another
computer and printing from a third computer
• Features mouse port switching functionality*, which allows users accessing the
KVM switch with a scroll mouse to switch between ports by double-clicking the
mouse’s scroll wheel
• Switch between connected computers via front panel pushbuttons, keyboard hotkeys,
and the mouse switching function*
• Auto Scan mode allows you to scan the connected computers without having to
manually switch between them
• Supports both analog and digital video signals, allowing for the connection of a
VGA computer and/or monitor with a DVI to VGA adapter
• Supports digital video resolutions up to 2560 x 1600 and analog video resolutions up
to 2048 x 1536
• Multi-platform support – Compatible with Windows, Mac, Sun and Linux
• Supports hot plugging – Computers and devices can be unplugged and re-plugged
without having to shut down the KVM switch
• The KVM switch stores the monitor’s EDID (Extended Display Identification Data) to
optimize display resolution
• LEDs provide for easy monitoring of the connected computers
• Power-On-Detection recognizes when a connected computer has been powered-off
and automatically switches to the next powered-on computer
• HDCP compliant
• Complete keyboard emulation for error-free booting
• Quick installation without the need for software
• Sun/Mac keyboard support and emulation**
• Firmware upgradeable
*The mouse switching function is disabled by default, and needs to be turned on via keyboard hotkey command.
It is only available when using a mouse with a scroll wheel.
**PC keyboard combinations emulate Sun/Mac keyboards. Sun/Mac keyboards only work with their own computers.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd
3
9/10/2013 4:45:00 PM
Features
Front Panel
1
3
2
1
3
4
5
No. Component
Description
Pressing one of the port selection pushbuttons will bring
the focus of one of the following to the corresponding port;
KVM only, Audio only, USB only, or KVM, Audio and USB
simultaneously. What functionality is switched is determined by
the Mode Selection Pushbutton (see below).
Port Selection
Pushbuttons
1
Pressing and holding pushbuttons 1 and 2 simultaneously
for more than 2 seconds will initiate an auto scan. On the
B004-2DUA4-K, pressing and holding pushbuttons 3 and 4
simultaneously for more than 2 seconds will perform a USB
keyboard/mouse reset.
Press this pushbutton to determine the functionality that is
switched to a port when its pushbutton is pressed. Pressing the
mode selection pushbutton once highlights the KVM, Audio and
USB functionality icons all at the same time. Pressing it twice
highlights KVM only; three times Audio only; and four times USB
only.
Mode
Selection
Pushbutton
2
Each port contains three LEDs; KVM, Audio, and USB. The
corresponding LED will illuminate under the port that has its
focus. For example, if port 1 has the focus of the KVM, Audio,
and USB all at the same time, then all three LEDs will illuminate
under port 1.
Port LEDs
3
4
5
A separate set of Console Speaker and Microphone jacks are
located on the front panel of the unit for greater accessibility.
Devices plugged into these ports will take priority over devices
plugged into the Console Speaker and Microphone jacks on the
back panel of the unit.
Console Audio
Connectors
USB 2.0 devices (flash drives, printers, scanners, etc.) can
be plugged into this port and shared between the connected
computers.
USB 2.0
Peripheral Port
4
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd
4
9/10/2013 4:45:01 PM
Features
Back Panel
1
2
3
4
5
6
No. Component
Description
This port is used to connect two Dual Display KVM switches
together via standard Cat5e/6 cable. When connected together,
computers with four DVI output ports can share KVM, audio and
USB peripherals (see the Quad-View Mode section in this manual
for details).
Quad-View
Mode Port
1
This switch determines which unit is the Client and which is the
Host in a Quad-View Mode installation (see the Quad-View Mode
section in this manual for details).
Quad-View
Mode Switch
2
3
USB 2.0 devices (flash drives, printers, scanners, etc.) can
be plugged into this port and shared between the connected
computers.
USB 2.0
Peripheral Port
The included power supply connects to the KVM switch here.
Power Jack
4
5
Your monitors, keyboard, mouse, microphone and speakers plug
into these ports.
Console Ports
The included DVI cables and KVM cable kits connect from an
available set of ports to a computer.
Computer
Ports
6
5
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd
5
9/10/2013 4:45:01 PM
Safety Instructions
• Read all of these instructions. Save them for future reference.
• Follow all warnings and instructions marked on the device.
• Do not place the device on any unstable surface (cart, stand, table, etc.). If the device
falls, serious damage will result.
• Do not use the device near water.
• Do not place the device near, or over, radiators or heat registers. The device cabinet is
provided with slots and openings to allow for adequate ventilation. To ensure reliable
operation, and to protect against overheating, these openings must never be blocked
or covered.
• The device should never be placed on a soft surface (bed, sofa, rug, etc.) as this will
block its ventilation openings. Likewise, the device should not be placed in a built in
enclosure unless adequate ventilation has been provided.
• Never spill liquid of any kind on the device.
• Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
• The device should be operated from the type of power source indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
• Do not allow anything to rest on the power cord or cables. Route the power cord and
cables so that they cannot be stepped on or tripped over.
• If an extension cord is used with this device make sure that the total of the ampere
ratings of all products used on this cord does not exceed the extension cord ampere
rating. Make sure that the total of all products plugged into the wall outlet does not
exceed 15 amperes.
• Position system cables and power cables carefully; be sure that nothing rests on any
cables.
• To help protect your system from sudden transient increases and decreases in
electrical power, it is recommended that you plug your devices into a Tripp Lite surge
suppressor, line conditioner, or uninterruptible power supply (UPS).
• When connecting or disconnecting power to hot-pluggable power supplies, observe the
following guidelines:
o Install the power supply before connecting the power cable to the power supply.
o Unplug the power cable before removing the power supply.
o If the system has multiple sources of power, disconnect power from the system by
unplugging all power cables from the power supplies.
• Never push objects of any kind into or through cabinet slots. They may touch
dangerous voltage points or short out parts resulting in a risk of fire or electrical shock.
• Do not attempt to service the device yourself. Refer all servicing to qualified service
personnel.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd
6
9/10/2013 4:45:01 PM
Safety Instructions
• If the following conditions occur, unplug the device from the wall outlet and bring it to
qualified service personnel for repair.
o The power cord or plug has become damaged or frayed.
o Liquid has been spilled into the device.
o The device has been exposed to rain or water.
o The device has been dropped, or the cabinet has been damaged.
o The device exhibits a distinct change in performance, indicating a need for service.
o The device does not operate normally when the operating instructions are followed.
• Only adjust those controls that are covered in the operating instructions. Improper
adjustment of other controls may result in damage that will require extensive work by a
qualified technician to repair.
• Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended. Do not use this
equipment in the presence of a flammable anesthetic mixture with air, oxygen or
nitrous oxide.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd
7
9/10/2013 4:45:01 PM
Installation
Standard Installation
Refer to the following steps and diagram to set up your KVM switch installation.
Notes:
1. Before making any connections, make sure that power to all devices being connected to the KVM switch is
turned off. Unplug the power cords of any computers that have the Keyboard Power On function.
2. The diagram below shows the B004-2DUA4-K installation. Installation for the B004-2DUA2-K is the same
except there are fewer ports.
6 7 8
1 2
4 5 4
3
10
4 4
5
1
2
3
Connect a monitor to the DVI console A port on the back panel of the KVM switch.
Connect a monitor to the DVI console B port on the back panel of the KVM switch.
Connect a USB keyboard and mouse to the corresponding USB keyboard and
mouse console ports on the back of the KVM switch.
4
Optional – Connect your microphone and speakers to the corresponding 3.5 mm
Mini Stereo console jacks on the front panel or the back panel. The jacks on the
front panel of the unit will take priority over those on the back panel.
5
6
Optional – Connect your USB device(s) to the USB 2.0 hub port(s) on the front and
back of the KVM switch.
Connect the end of the KVM Cable Kit that includes the USB Type B Male connector
to an available set of computer ports on the back panel of the unit. Connect the
DVI connector to the DVI A port, and the USB and 3.5 mm connectors to the
corresponding USB and 3.5 mm ports.
7
Connect the other end of the KVM Cable Kit to the corresponding ports on the
computer you wish to add to the installation. Note: The B004-2DUA2-K and
B004-2DUA4-K come with 6 ft. Cable Kits. If you need a longer cable, you will
have to purchase a separate P759-Series DVI/USB + Audio KVM Cable Kit of the
appropriate length.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd
8
9/10/2013 4:45:01 PM
Installation
8
9
Connect a DVI cable to the DVI B port on the back of the KVM, and then into a
DVI port on the computer being added to the installation. Note: The B004-2DUA2-K
and B004-2DUA4-K come with 6 ft. DVI-D Dual Link Cables. If you need a longer
cable, you will have to purchase a separate P560-Series (DVI-D Dual-Link) or
P561-Series (DVI-D Single-Link) cable of the appropriate length.
Repeat steps 6 through 8 for each additional computer you are adding to the
installation.
10
Connect the included power supply to the KVM switch, and then plug it into an
appropriate power source. To help protect your system from sudden transient
increases and decreases in electrical power, it is recommended that you plug your
devices into a Tripp Lite surge suppressor, line conditioner, or uninterruptible power
supply (UPS).
11
Turn on the power to all connected devices.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd
9
9/10/2013 4:45:02 PM
Installation
Quad-View Mode Installation
Refer to the following steps and diagram to set up your KVM switch Quad-View Mode
installation.
Notes:
1. Before making any connections, make sure that power to all devices being connected to the KVM switch is
turned off. Unplug the power cords of any computers that have the Keyboard Power On function.
2. In Quad-View Mode, the keyboard and mouse console ports on the Client KVM are disabled, as are the front-
panel pushbuttons of the Client KVM.
3. The diagram below shows the B004-2DUA4-K installation. Installation for the B004-2DUA2-K is the same
except there are fewer ports.
COMPUTER 1
11 12 13 14 15 16
3 4 8 9 8
7
HOST KVM
18
1
5 6
2
CLIENT KVM
18
1
2
3
4
5
6
7
Connect the RJ45 QUAD port on one Dual Display KVM switch to the RJ45 QUAD
port on a second Dual Display KVM switch.
Flip the Quad-View Mode Switch of one KVM to the Host position, and the switch of
the other KVM to the Client position.
Connect a monitor to the DVI console A port on the back panel of the Host
KVM switch.
Connect a monitor to the DVI console B port on the back panel of the Host
KVM switch.
Connect a monitor to the DVI console A port on the back panel of the Client
KVM switch.
Connect a monitor to the DVI console B port on the back panel of the Client
KVM switch.
Connect a USB keyboard and mouse to the corresponding USB keyboard and
mouse console ports on the back of the Host KVM switch. The USB keyboard and
mouse console ports on the back of the Client KVM switch can remain open.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 10
9/10/2013 4:45:02 PM
Installation
8
9
Optional – Connect your microphone and speakers to the corresponding 3.5 mm
Mini Stereo console jacks on the front panel or the back panel of the Host KVM
switch. The jacks on the front panel of the unit will take priority over those on the
back panel. The 3.5 mm Mini Stereo console ports on the Client KVM switch can
remain open.
Optional – Connect your USB device(s) to the USB 2.0 hub port(s) on the front and
back of the Host KVM switch.
10
11
Optional – Connect your USB device(s) to the USB 2.0 hub port(s) on the front and
back of the Client KVM switch. Note: The USB ports on the back of the Client KVM
must be connected to the computers for these ports to work. See step 16.
Connect the end of the KVM Cable Kit that includes the USB Type B Male connector
to an available set of computer ports on the back panel of the Host KVM switch.
Connect the DVI connector to the DVI A port, and the USB and 3.5 mm connectors
to the corresponding USB and 3.5 mm ports.
12
13
Connect the other end of the KVM Cable Kit to the corresponding ports on the
computer you wish to add to the installation. Note: The B004-2DUA2-K and
B004-2DUA4-K come with 6 ft. Cable Kits. If you need a longer cable, you will
have to purchase a separate P759-Series DVI/USB + Audio KVM Cable Kit of the
appropriate length.
Connect a DVI cable to the DVI B port on the back of the Host KVM switch, and
then into a DVI port on the computer being added to the installation. Note: The
B004-2DUA2-K and B004-2DUA4-K come with 6 ft. DVI-D Dual Link Cables. If you
need a longer cable, you will have to purchase a separate P560-Series (DVI-D
Dual-Link) or P561-Series (DVI-D Single-Link) cable of the appropriate length.
14
15
16
Connect a DVI cable to the DVI A port on the back of the Client KVM switch, and
then into a DVI port on the computer being added to the installation.
Connect a DVI cable to the DVI B port on the back of the Client KVM switch, and
then into a DVI port on the computer being added to the installation.
In order for the USB 2.0 Hub functionality of the Client KVM switch to work, the USB
computer ports on the back of the Client KVM must be connected to USB ports on
the computers being added to the installation. If you are using this functionality,
connect the USB computer port on the Client KVM switch to a USB port on
the computer being added to the installation using a standard USB 2.0 cable.
Otherwise, the USB and 3.5 mm Mini Stereo KVM ports on the Client KVM switch
can remain open.
17
18
Repeat steps 11 through 16 for each additional computer you are adding to the
installation.
Connect the included power supplies to the KVM switches, and then plug them into
an appropriate power source. To help protect your system from sudden transient
increases and decreases in electrical power, it is recommended that you plug your
devices into a Tripp Lite surge suppressor, line conditioner, or uninterruptible power
supply (UPS).
19
Turn on the power to all connected devices.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 11
9/10/2013 4:45:02 PM
Basic Operation
Powering Off and Restarting
In the event that you need to power off the KVM switch, you must follow the steps below:
1. Shut down all computers connected to the KVM switch
2. Unplug the power supply from the KVM switch
3. Wait 10 seconds and then plug the power supply back into the KVM switch
4. Power on all of the connected computers
Port Switching
There are three ways of accessing computers and devices connected to the KVM switch:
• Manual Pushbuttons
• Mouse port switching functionality
• Hotkeys
Manual Pushbuttons
Pressing a pushbutton will bring the focus of one of the following to the corresponding
port; KVM only, Audio only, USB only, or KVM, Audio and USB focus simultaneously.
What functionality is switched is determined by the Mode Selection pushbutton.
Press the Mode Selection pushbutton to determine the functionality that is switched to
a port when its pushbutton is pressed. Pressing the mode selection pushbutton once
highlights the KVM, Audio and USB functionality icons all at the same time. Pressing it
twice highlights KVM only; three times Audio only; and four times USB only.
After selecting the desired functionality via the Mode Selection pushbutton, press the
pushbutton of the port you want to switch that functionality to.
Pressing and holding pushbuttons 1 and 2 simultaneously for more than 2 seconds will
initiate Auto Scan mode at the default interval of 5 seconds per port. Auto Scan mode
switches between ports at regular intervals. During Auto Scan mode, only the KVM focus
switches between ports, while Audio and USB remain on the port they were at when Auto
Scan mode was initiated. To exit Auto Scan mode, press the [Esc] or [Spacebar] key. On
the B004-2DUA4-K, pressing and holding pushbuttons 3 and 4 simultaneously for more
than 2 seconds performs a keyboard/mouse reset.
Mouse Port Switching Functionality
When enabled, the Mouse Port Switching Functionality allows users with scroll mice
to simultaneously switch the focus of the KVM, Audio and USB between ports by
double-clicking the scroll wheel on their mouse. When used, ports will be accessed in
sequential order. (e.g. port 1 will switch to port 2; port 2 to port 3, and so on).
As this function is disabled by default, you have to enable it via hotkey command
(See Mouse Port Switching in the Hotkeys section of this manual for details).
For Mouse Port Switching Functionality to work, Mouse Emulation must be turned on.
Hotkeys
Hotkeys allow you to switch functionality focus between ports using only the keyboard,
as well as configure KVM switch settings. The following section describes the hotkey
functionality available for the B004-2DUA2-K and B004-2DUA4-K.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 12
9/10/2013 4:45:02 PM
Basic Operation
Port Switching Hotkeys
To switch functionality between ports, a keyboard hotkey command is entered that
determines what port is accessed and which functionality is assigned to it. This
command starts by pressing [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. [Scroll Lock]
[Scroll Lock] is used by default. To toggle between these two, see Alternate Port
Switching Hotkey Command in the Hotkey Setting Mode section of this manual.
The table below contains the Port Switching Hotkeys used to determine what port is
accessed and which functionality is assigned to it. Note: The table below uses the
[Scroll Lock] [Scroll Lock] preceding sequence. Simply substitute [Ctrl][Ctrl] if you decide
to change the Hotkey Preceding Sequence.
Hotkey Command
Action
[Scroll Lock] [Scroll Lock] [Enter]
Switches focus of the KVM, Audio and USB
from the port that currently has the KVM
focus to the port that follows it. (e.g. 1 to 2,
2 to 3, etc.)
[Scroll Lock] [Scroll Lock] [K] [Enter]
[Scroll Lock] [Scroll Lock] [U] [Enter]
[Scroll Lock] [Scroll Lock] [S] [Enter]
Switches focus of the KVM only from the port
that currently has the KVM focus to the port
that follows it.
Switches focus of the USB only from the port
that currently has the USB focus to the port
that follows it.
Switches focus of the Audio only from the
port that currently has the Audio focus to the
port that follows it.
[Scroll Lock] [Scroll Lock] [n]* [Enter]
Switches focus of the KVM, Audio and USB to
the selected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [U] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [S] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [K] [U] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [K] [S] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [U] [S] [Enter]
Switches focus of the KVM only to the se-
lected port number.
Switches focus of the USB only to the se-
lected port number.
Switches focus of the Audio only to the se-
lected port number.
Switches focus of the KVM and USB to the
selected port number.
Switches focus of the KVM and Audio to the
selected port number.
Switches focus of the USB and Audio to the
selected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [S] [U] [Enter] Switches focus of the KVM, Audio and USB to
the selected port number.
[Scroll Lock] [Scroll Lock] [A] [Enter]
Initiates Auto Scan mode at the default inter-
val of 5 seconds per port. Press the [Esc] or
[Spacebar] key to exit Auto Scan mode.
[Scroll Lock] [Scroll Lock] [A] [n]* [Enter]
Initiates Auto Scan mode at the selected time
interval. Press the [Esc] or [Spacebar] key to
exit Auto Scan mode.
* [n] stands for the port number of the computer that you are switching to, or the number of seconds
(from 1 to 99) that an Auto Scan remains on each port.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 13
9/10/2013 4:45:02 PM
Basic Operation
Hotkey Setting Mode
All configuration of the KVM’s settings takes place in Hotkey Setting mode. All
commands in Hotkey Setting mode start by entering the Hotkey Setting Mode Activation
Command. When Hotkey Setting Mode is activated, the [Scroll Lock] and [Caps Lock]
keyboard LEDs flash in succession and ordinary keyboard and mouse functions are
suspended. The section that follows describes how to activate Hotkey Setting mode, and
the commands that can be performed in it. A table at the end of this section summarizes
all of the commands.
Hotkey Setting Mode Activation Command
To activate Hotkey Setting mode, do the following.
1. Press and hold down the [Num Lock] key
2. While holding down the [Num Lock] key, press and release the minus [-] key
3. After releasing the minus [-] key, release the [Num Lock] key
Alternate Hotkey Setting Mode Activation Command
The Hotkey Setting Mode Activation Command defaults at [Scroll Lock] [-], but can be
switched to use [Ctrl] [F12]. When switched to [Ctrl] [F12], the [Ctrl] key takes the place
of the [Scroll Lock] key, and [F12] takes the place of the [-] key. To activate the Alternate
Hotkey Setting Mode Activation Command, perform the following steps. To revert back to
the previous command, perform these steps again.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [H] key
Alternate Port Switching Hotkey Command
By default, the hotkey proceeding sequence used in Port Switching Hotkeys is [Scroll
Lock] [Scroll Lock]. To toggle between [Scroll Lock] [Scroll Lock] and [Ctrl] [Ctrl], do the
following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [T] key
Keyboard Operating System
The B004-2DUA2-K and B004-2DUA4-K default keyboard configuration is for use with
PC compatible keyboards. If you have a Mac or Sun computer, you can enable the
KVM to emulate Mac or Sun keyboard commands. When enabled, your PC compatible
keyboard can be used to perform commands specific to Mac or Sun (See the Keyboard
Emulation section in this manual for details). To set the Keyboard Operating System, do
the following.
1. Navigate to the port whose Keyboard Operating System setting you wish to change
2. Activate Hotkey Setting Mode using the aforementioned command
3. Press and release the [F2] (for Mac), [F3] (for Sun), or [F10] (for Auto-Detect) key
When enabled for Auto-Detect, a pass-through keyboard mode is enabled in which
keystrokes are sent directly to the computer without first going through the Mac or Sun
emulator.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 14
9/10/2013 4:45:02 PM
Basic Operation
List KVM Settings
This function allows you to display a list of the current KVM settings; Hotkeys, Keyboard
OS, Keyboard Emulation, Mouse Emulation, Mouse Port Switching, Power On Detection
and Keyboard Language. To perform this function, do the following.
1. Open up a Word, Wordpad, Notepad or Excel file
2. Activate Hotkey Setting Mode using the aforementioned command
3. Press and release the [F4] key
USB Keyboard/Mouse Reset
In the event that the keyboard and mouse are not operating correctly, a reset may be
needed. To perform a USB keyboard/mouse reset, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [F5] key
Hotkey Beeper Control
When performing a keyboard hotkey command, a beeper sounds to indicate that the
command is taking place. This beeper sound can be toggled on/off by performing the
following command.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [B] key
Disable Port Switching Hotkeys
By default, Port Switching Hotkeys are available that allow you to switch between ports.
To disable the Port Switching Hotkeys and require the front panel pushbuttons to be used
for switching functions, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [x] key and then press and release the [Enter] key
Firmware Upgrade Mode
The B004-2DUA2-K and B004-2DUA4-K firmware can be upgraded as updates become
available on Tripp Lite’s website (See the Firmware Upgrade section in this manual for
details). In order to perform a firmware upgrade, Firmware Upgrade Mode must first be
initiated. To initiate Firmware Upgrade Mode, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Key in the text “upgrade”
3. Press and release the [Enter] key
The LEDs on the front of the KVM flash to indicate that Firmware Upgrade Mode has
been initiated.
Restore Default Settings
To restore the KVM to its factory default settings, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [R] key, and then press and release the [Enter] key
15
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 15
9/10/2013 4:45:02 PM
Basic Operation
Power on Detection
By default, the KVM is set to recognize when a connected computer is powered off,
at which time it automatically switches to the next powered on port. To turn Power on
Detection on/off, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [E] key
Video Sync
Video Sync allows the KVM to store the monitor’s EDID (Extended Display Identification
Data), which helps to ensure optimal video settings are being used. To initiate a Video
Sync, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [D] key
Keyboard Emulation
By default, Keyboard Emulation is enabled. To toggle keyboard emulation on/off, do the
following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [N] key
Mouse Emulation
By default, Mouse Emulation is enabled. To toggle mouse emulation on/off, do the
following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [M] key
Mouse Port Switching
When enabled, the Mouse Port Switching Functionality allows users with scroll mice
to simultaneously switch the focus of the KVM, Audio and USB between ports by
double-clicking the scroll wheel on their mouse. When used, ports will be accessed
in sequential order. (e. g. port 1 will switch to port 2; port 2 to port 3, and so on). By
default, Mouse Port Switching Functionality is disabled. To toggle Mouse Port Switching
Functionality on/off, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [W] key
SPC Mode
The keyboard/mouse can be set to work under special operating systems as a standard
(104 key) keyboard/mouse. To turn SPC Mode on/off, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [F1] key
16
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 16
9/10/2013 4:45:02 PM
Basic Operation
Pushbutton 1 and 2 Command
By default, pressing pushbuttons 1 and 2 at the same time for two seconds will initiate
Auto Scan Mode, but you can set it to perform any Hotkey Setting Mode command that
you want. The Restore Default Settings, Disable Port Switching Hotkeys, and Firmware
Upgrade Mode commands cannot be used. To set the Pushbutton 1 and 2 Command,
do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [C] key
3. Perform the command that you wish to set. (e.g. Press and release the [W] key to set
the Pushbutton 1 and 2 Command to turn Mouse Port Switching Functionality on/off.
To return the Pushbutton 1 and 2 Command to its default, press and release the [A] key
in step 3.
Pushbutton 3 and 4 Command
By default, pressing pushbuttons 3 and 4 at the same time for two seconds will perform
a USB Keyboard/Mouse Reset, but you can set it to perform any Hotkey Setting Mode
command that you want. The Restore Default Settings, Disable Port Switching Hotkeys,
and Firmware Upgrade Mode commands cannot be used. To set the Pushbutton 3 and 4
Command, do the following.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Press and release the [C] key, and then press and release the [2] key
3. Perform the command that you wish to set. (e.g. Press and release the [W] key to set
the Pushbutton 3 and 4 Command to turn Mouse Port Switching Functionality on/off.)
To return the Pushbutton 3 and 4 Command to its default, press and release the [F5]
key in step 3.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 17
9/10/2013 4:45:02 PM
Basic Operation
Hotkey Setting Mode Command Summary Table
Action
Hotkey Command
Activate Hotkey Setting Mode
Press and hold the [Num Lock] key, press and release the
minus [-] key, release the [Num Lock] key.
Activate Hotkey Setting Mode, [H]
Change Hotkey Setting Mode
activation command to [Ctrl] [F12]
Change the Port Switching Hotkey
Command to [Ctrl] [Ctrl]
Change the Keyboard Operating
System
Activate Hotkey Setting Mode, [T]
Activate Hotkey Setting Mode, [F2] (for Mac), [F3]
(for Sun), or [F10] (for Auto-Detect)
Open a Word, Wordpad, Notepad or Excel file, Activate
Hotkey Setting Mode, [F4]
List KVM Settings
USB Keyboard/Mouse Reset
Hotkey Beeper Control
Disable Port Switching Hotkeys
Firmware Upgrade Mode
Restore Default Settings
Video Sync
Activate Hotkey Setting Mode, [F5]
Activate Hotkey Setting Mode, [B]
Activate Hotkey Setting Mode, [X], [Enter]
Activate Hotkey Setting Mode, upgrade, [Enter]
Activate Hotkey Setting Mode, [R], [Enter]
Activate Hotkey Setting Mode, [D]
Power on Detection
Activate Hotkey Setting Mode, [E]
Keyboard Emulation
Mouse Emulation
Activate Hotkey Setting Mode, [N]
Activate Hotkey Setting Mode, [M]
Mouse Port Switching
SPC Mode
Activate Hotkey Setting Mode, [W]
Activate Hotkey Setting Mode, [F1]
Pushbutton 1 and 2 Command
Activate Hotkey Setting Mode, [C], Choose your hotkey
Press [A] for the last step when returning command to
default.
Pushbutton 3 and 4 Command
Activate Hotkey Setting Mode, [C], [2], Choose your hotkey
Press [F5] for the last step when returning command to
default.
Mac Keyboard Emulation
The PC compatible (101/104 key) keyboard can emulate the functions of the Mac
keyboard using the PC keystrokes in the table below.
Note: When more than one key is required on the PC Keyboard to emulate the Mac keyboard, press and release
the first key, and then press and release the second key.
PC Keyboard
[Shift]
Mac Keyboard
[Shift]
PC Keyboard
[Alt]
Mac Keyboard
[Alt]
[Ctrl]
[Ctrl]
[Print Screen]
[Scroll Lock]
[F13]
[F14]
[Ctrl], [1]
[Ctrl], [2]
[Ctrl], [3]
[Ctrl], [4]
[=]
[Enter]
[Return]
[Delete]
[Help]
[Backspace]
[Insert]
[Ctrl],
[F15]
18
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 18
9/10/2013 4:45:03 PM
Basic Operation
Sun Keyboard Emulation
The PC compatible (101/104 key) keyboard can emulate the functions of the Sun
keyboard using the PC keystrokes in the table below.
Note: When more than one key is required on the PC Keyboard to emulate the Sun keyboard, press and release
the first key, and then press and release the second key.
PC Keyboard
[Ctrl], [T]
Sun Keyboard
[Stop]
PC Keyboard
[Ctrl], [F10]
[Ctrl], [1]
Sun Keyboard
[Cut]
[Ctrl], [F2]
[Ctrl], [F3]
[Ctrl], [F4]
[Ctrl], [F5]
[Ctrl], [F6]
[Ctrl], [F7]
[Ctrl], [F8]
[Ctrl], [F9]
[Again]
[Props]
[Undo]
[Ctrl], [2]
[Ctrl], [3]
[Front]
[Ctrl], [4]
[Copy]
[Ctrl], [H]
[Help]
[Open]
[Compose]
[Paste]
[Find]
19
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 19
9/10/2013 4:45:03 PM
Firmware Upgrade
Firmware Upgrade Utility
As firmware upgrades become available, they can be found on the internet at
upgrade file. Firmware upgrades cannot be performed simultaneously when in Quad-View
Mode. KVMs in Quad-View mode will need to be disconnected from each other, switched
to the Host position, and upgraded separately. To upgrade the firmware of your KVM
switch, follow the steps below:
obtain the firmware upgrade for your KVM switch, and save it to your computer.
2. Shut down all of the computers connected to the KVM switch, except for the
computer that you downloaded the firmware upgrade to.
3. Invoke Firmware Upgrade Mode via the Firmware Upgrade hotkey command.
(See Firmware Upgrade Mode in the Hotkey Setting Mode section of this manual
for details.)
4. On the computer the firmware upgrade file is saved to, run the Firmware Upgrade
Utility file by double-clicking on it or by opening up a command line and typing in the
path to it.
5. After reading the license agreement, click on the I Agree option and click Next. The
Firmware Upgrade Utility main screen appears and displays the KVM switch in the
Device List on the left side of the screen.
6. Highlight the KVM switch in the Device List by clicking on it with the mouse. If you
want the Firmware Upgrade Utility to check the KVM’s firmware version to see if it is
older/newer than the firmware upgrade file, check the Check Firmware Version box
in the lower-left of the screen. If you want the Firmware Upgrade Utility to upload the
firmware upgrade file without checking the KVM’s firmware version, leave this box
unchecked. Click Next.
7. If the Check Firmware Version box is checked, and the Firmware Upgrade Utility
finds the KVM’s firmware is newer than that of the firmware upgrade file, you will be
prompted to continue or cancel. Once the firmware upgrade starts, status messages
appear in the Status Message panel and progress towards completion is shown in the
Progress Bar. When the upgrade is complete, the Status Message panel will inform
you that the firmware upgrade was ok. At this point, click Finish to complete the
firmware upgrade. After a successful firmware upgrade, the switch will reset itself.
Firmware Upgrade Failure
If you are not notified of a successful firmware upgrade, it means that the firmware
upgrade failed to install properly. In this case, do the following.
1. Power off the KVM switch by disconnecting the external power supply.
2. Press and hold the Mode Selection Pushbutton, while at the same time connecting
the external power supply to restore power to the KVM switch. The front panel LEDs
will begin to flash to indicate that the KVM is in firmware upgrade mode.
3. Perform the firmware upgrade again.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 20
9/10/2013 4:45:03 PM
Factory Default Settings
Setting
Default
Port Switching Hotkey Command
Hotkey Setting Mode Activation Command
Keyboard Operating System
Hotkey Beeper
[Scroll Lock], [Scroll Lock]
[Num Lock], [-]
Auto-Detect
On
Port Switching Hotkeys
Keyboard Emulation
Enabled
Enabled
Mouse Emulation
Enabled
Mouse Switching Function
Power on Detection
Disabled
Enabled
SPC Mode
Disabled
Pushbutton 1 and 2 Command
Pushbutton 3 and 4 Command
Auto Scan Initiation
USB Keyboard/Mouse Reset
21
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 21
9/10/2013 4:45:03 PM
Specifications
Feature
B004-2DUA2-K
B004-2DUA4-K
# of Computer Ports
2
4
Expandable
Yes (Quad-View Mode)
Yes (Quad-View Mode)
(Cascade/Daisychain)
Form Factor
Desktop
Desktop
Port Selection
Hotkeys, Pushbuttons,
Mouse Switching Function*
Hotkeys, Pushbuttons,
Mouse Switching Function*
Console Keyboard/Mouse Ports (x2) USB A Female
(x2) USB A Female
(x4) DVI-I Female
Console Video Port
Console Speaker/Mic Ports
Computer Ports
(x2) DVI-I Female
(x4) 3.5 mm Female**
(x4) 3.5 mm Female**
(x4) DVI-I Female, (x2) USB B (x8) DVI-I Female, (x4) USB B
Female, (x4) 3.5 mm Female
Female, (x8) 3.5 mm Female
KVM Cable Kits
P759-Series
P759-Series
Included KVM Cable Kits
Power Jack
(x2) P759-006
(x4) P759-006
DC Power Jack for
External Power Supply
DC Power Jack for
External Power Supply
Power Consumption
5.3V, 10.6W
(x2) USB A Female
USB
5.3V, 12.19W
(x2) USB A Female
USB
USB 2.0 Hub Ports
Keyboard/Mouse Emulation
Max Video Resolution
Digital – 2560 x 1600,
Analog – 2048 x 1536
Digital – 2560 x 1600,
Analog – 2048 x 1536
Operating Temperature
Storage Temperature
Humidity
32 to 122 F (0 to 50 C)
-4 to 140 F (-20 to 60 C)
32 to 122 F (0 to 50 C)
-4 to 140 F (-20 to 60 C)
0 to 80% RH, Non-Condensing 0 to 80% RH, Non-Condensing
Unit Dimensions
(H x W x D, in.)
1.75 x 10.25 x 3
1.75 x 17 x 6
Unit Weight (lb.)
1.23
5.11
*The mouse switching function is disabled by default, and needs to be turned on via hotkey command. For mouse
switching function to work, mouse emulation must be enabled. It is only available when using a mouse with a
scroll wheel.
**The B004-2DUA2-K and B004-2DUA4-K include 2 sets of Speaker/Mic ports; (2) 3.5mm jacks on the front and
(2) 3.5mm jacks on the back. The front panel ports take priority over the back panel.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 22
9/10/2013 4:45:03 PM
Warranty and Warranty Registration
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year
from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at
its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned
Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must
be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must
be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This
warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has
been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit
limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to
the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or
revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims
by third parties, or otherwise.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when
customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
•
•
Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
Send the new equipment back for recycling when this ultimately becomes waste
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority
to operate this equipment.
Tripp Lite follows a policy of continuous improvement. Specifications are subject to change without notice.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 23
9/10/2013 4:45:03 PM
13-09-063 • 93-3242_revB
24
Download from Www.Somanuals.com. All Manuals Search And Download.
13-09-063-933242-EN.indd 24
9/10/2013 4:45:03 PM
|