Uniden Cell Phone PCD1080 User Manual

Precautions  
Before you read anything else, please observe the following:  
Rechargeable Nickel-Cadmium Battery Warning  
This equipment contains a Rechargeable Nickel-Cadmium Battery.  
Cadmium is a chemical known to the state of California to cause cancer.  
Do not charge Rechargeable Nickel-Cadmium batteries with any charger other than the one  
specified in this guide. Using another charger may damage the battery or cause the battery  
to explode.  
Rechargeable Nickel-Cadmium Batteries  
must be recycled or disposed of properly!  
Uniden voluntarily participates in an RBRC® industry program to collect and recycle  
nickel-cadmium batteries at the end of their useful life, when taken out of service within the  
United States. The RBRC® program provides a convenient alternative to placing used  
nickel-cadmium batteries into the trash or municipal waste stream, which is illegal in some areas.  
Through the RBRC® program, Uniden makes it easy for you to drop off the used battery at local  
retailers of replacement nickel-cadmium batteries. You may also contact your local recycling  
center for information on where to return the used battery. Please call 1-800-8-BATTERY for  
information on Ni-Cd battery recycling in your area. Uniden’s involvement in this program is part  
of its commitment to protecting our environment and conserving natural resources.  
RBRC® is a registered trademark of the Rechargeable Battery Recycling Corporation.©1998  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCD2000A Portable Cellular Phone Controls  
1. Antenna  
1
2
3
2. Earphone  
3. Display  
4. Scroll Up/ Volume Up  
5. Send Key (Call Origination, Flash Key)  
6. Memory Process/Recall Key  
7. Alphanumeric Keypad  
8. Asterisk Key (Phone Number Review)  
9. External Charger Jack  
10. Microphone  
11  
12  
13  
14  
4
5
6
11. Headset Jack  
15  
12. Scroll Down/Volume Down  
13. End Call/Power On-Off  
14. Menu Key  
7
16  
8
9
15. Clear Key  
10  
16. Pound Key (Phone Number Review)  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCD2000A Liquid Crystal Display  
1
1. 20 Character Display  
2. Signal Strength Indicator  
3. Appears when out of Service  
Area or No Signal  
4. Indicates System in use (A or B)  
5. Appears when out of Home  
Service Area  
8
2
6. Appears when call is in progress  
7. Indicates Menu Number or  
Memory location  
8. Battery Strength indicator  
3 4 5  
6
7
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information For Wireless Handheld Phones  
Read this section before using your PCD2000A cellular telephone.  
Exposure To Radio Frequency Signals  
Your wireless handheld portable telephone is a low power radio  
transmitter and receiver. When it is ON, it receives and also  
sends out radio frequency (RF) signals.  
Antenna Care  
Use only the supplied or an approved replacement antenna.  
Unauthorized antennas, modifications, or attachments could  
damage the phone and may violate FCC regulations.  
In August, 1996, the Federal Communications Commission  
(FCC) adopted RF exposure guidelines with safety levels for  
handheld wireless phones. Those guidelines are consistent with  
the safety standards previously set by both U.S. and  
international standards bodies:  
Phone Operation  
Normal Position  
Hold the phone as you would any other telephone with the  
antenna pointed up and over your shoulder.  
ANSI C95.1 (1992)  
NCRP Report 86 (1986)  
ICNIRP (1996)  
Tips On Efficient Operation  
For your phone to operate most efficiently:  
Extend your antenna fully.  
Those standards were based on comprehensive and  
periodic evaluations of the relevant scientific literature. For  
example, over 120 scientists, engineers, and physicians from  
universities, government health agencies, and industry  
reviewed the available body of research to develop the ANSI  
Standard (C95.1).  
Do not touch the antenna unnecessarily when the phone is in  
use. Contact with the antenna affects call quality and may  
cause the phone to operate at a higher power level than  
otherwise needed.  
The design of your phone complies with the FCC guidelines  
(and those standards).  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Driving  
Should use the ear opposite the pacemaker to minimize the  
potential for interference.  
Check the laws and regulations on the use of wireless  
telephones in the areas where you drive. Always obey them.  
Also, if using your phone while driving, please:  
If you have any reason to suspect that interference is  
taking place, turn your phone OFF immediately.  
Other Medical Devices  
If you use any other personal medical device, consult the  
manufacturer of your device to determine if they are adequately  
shielded from external RF energy. Your physician may be able  
to assist you in obtaining this information.  
Give full attention to driving — driving safely is your first  
responsibility.  
Use hands-free operation, if available:  
Pull off the road and park before making or answering a  
call if driving conditions so require.  
Turn your phone OFF in health care facilities when any regulations  
posted in these areas instruct you to do so. Hospitals or health care  
facilities may be using equipment that could be sensitive to external  
RF energy.  
Electronic Devices  
Most modern electronic equipment is shielded from RF signals.  
However, certain electronic equipment may not be shielded  
against the RF signals from your wireless phone.  
Vehicles  
Pacemakers  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle. You  
should also consult the manufacturer of any equipment that has  
been added to your vehicle.  
The Health Industry Manufacturers Association recommends  
that a minimum separation of six (6”) inches be maintained  
between a handheld wireless phone and a pacemaker to avoid  
potential interference with the pacemaker. These  
recommendations are consistent with the independent research  
by and recommendations of Wireless Technology Research.  
For Vehicles Equipped with an Air Bag  
An air bag inflates with great force. DO NOT place objects,  
including both installed or portable wireless equipment, in the  
area over the air bag or in the air bag deployment area. If  
in-vehicle wireless equipment is improperly installed and the air  
bag inflates, serious injury could result.  
Persons with pacemakers:  
Should ALWAYS keep the phone more than six inches  
from their pacemaker when the phone is turned ON.  
Should not carry the phone in a breast pocket.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Posted Facilities  
Turn your phone OFF in any facility where posted notices  
so require.  
Aircraft  
FCC Regulations prohibit using your phone while in the air.  
Switch OFF your phone before boarding an aircraft.  
Blasting Areas  
To avoid interfering with blasting operations, turn your phone  
OFF when in a “blasting area” or in areas posted: “Turn off  
two-way radio.” Obey all signs and instructions.  
Potentially Explosive Atmospheres  
Turn your phone OFF when in any area with a potentially  
explosive atmosphere and obey all signs and instructions.  
Sparks in such areas could cause an explosion or fire resulting  
in bodily injury or even death.  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include fueling areas such as  
gasoline stations; below deck on boats; fuel or chemical transfer  
or storage facilities; vehicles using liquefied petroleum gas (such  
as propane or butane); areas where the air contains chemicals  
or particles, such as grain, dust, or metal powders; and any  
other area where you would normally be advised to turn off your  
vehicle engine.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
Warning!  
Important Safety Instructions  
Uniden America Corporation DOES NOT represent this unit to  
be waterproof. To reduce the risk of fire, electrical shock, or  
damage to the unit, DO NOT expose this unit to rain or moisture.  
When using your wireless handheld phone, these basic safety  
precautions should always be followed to reduce the risk of fire,  
electrical shock, and injury to persons.  
1.  
2.  
3.  
Read and understand all instructions.  
Follow all warnings and instructions marked on the product.  
If the product is connected to a battery charger, unplug it  
from the wall outlet before cleaning. Use a dry cloth for  
cleaning without liquid aerosol cleaners.  
4.  
5.  
6.  
Do not use this product near water; for example, near a  
bath tub, wash bowl, kitchen sink or laundry tub, in a wet  
basement, or near a swimming pool.  
The FCC Wants You To Know  
Changes or modifications to this product not expressly approved  
by Uniden, or operation of this product in any way other than as  
detailed by the owner’s manual, could void your authority to  
operate this product.  
Do not place this product on an unstable cart, stand, or  
table. The product may fall, causing serious damage to  
the unit.  
Wireless Handheld Phone Privacy  
Slots and openings in the product may be provided for  
ventilation. To protect from overheating, these openings  
must not be blocked or covered. This product should never  
be placed near or over a radiator or heat register.  
Wireless handheld phones are radio devices. Because of the  
inherent physical properties of radio waves, your  
communications can be received by radio receiving devices  
other than your own wireless handheld phone. Consequently,  
any communications using your wireless handheld phone may  
not be private.  
7.  
This product’s battery charger should be operated only  
from the type of power source indicated on the marking  
label. If you are not sure of the type of power source  
available, consult your dealer or local power company.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. When using the battery charger, do not overload wall  
outlets and extension cords, as this can result in the risk of  
fire or electrical shock.  
Battery Safety Precautions  
Caution! To reduce the risk of fire or injury to persons  
by the battery, read and follow these instructions:  
9. Never push objects of any kind into this product through  
ventilation slots, as they may touch dangerous voltage  
points or short out parts that could result in a risk of fire or  
electric shock. Never spill liquid of any kind on the product.  
1. Use only the appropriate type and size battery pack(s)  
specified in the owner’s manual.  
2. Do not dispose of the battery pack in a fire. The cell  
may explode.  
10. To reduce the risk of electric shock, do not disassemble  
this product. Take it to qualified service personnel when  
service or repair work is required. Opening or removing  
covers may expose you to dangerous voltages or other  
risks. Incorrect reassembly can cause electric shock when  
the appliance is subsequently used.  
3. Do not open or mutilate the battery pack. Released  
electrolyte is corrosive and may cause damage to the  
eyes or skin. It may be toxic if swallowed.  
4. Exercise care in handling the battery in order not to short  
the battery with conducting materials such as rings,  
bracelets, and keys. The battery or conductor may  
overheat and cause burns.  
11. Refer servicing to qualified service personnel under the  
following conditions:  
5. Charge the battery pack provided with or identified for use  
with this product only in accordance with the instructions  
and limitations specified in the owner’s manual provided  
for this product.  
A. When the battery charger power supply cord is  
damaged or frayed.  
B. If liquid has been spilled into the product.  
C. If the product has been exposed to rain or water.  
6. Observe proper polarity orientation between the battery  
pack and battery charger.  
D. If the product does not operate normally when following  
the operating instructions. (Adjust only those controls that  
are covered by the operating instructions. Improper  
adjustment of other controls may result in damage and  
will often require extensive repair work by a  
qualified technician).  
E. If the product has been dropped or damaged.  
F. If the product exhibits a distinct change in performance.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome!  
You have chosen to enter the world of cellular  
We’re confident you will be proud to own the PCD2000A. To  
make sure you understand all its convenient features, please  
take the time to read this Operating Guide. It will help you use  
the technology and convenience of cellular communications.  
telephone technology with one of the finest portable  
cellular phones available today, the PCD2000A. Now, you  
can place or receive calls from anywhere there is cellular  
coverage. Your PCD2000A can go with you anywhere so that  
you’re never out of touch: in your car, on the beach, at the golf  
course, or even just for a walk in the woods. With the Roam  
feature, you can also use your unit in most metropolitan areas  
when you travel away from your own area. The many standard  
features on the PCD2000A make calling quick and  
convenient. And the easy-to-use Menu functions help you  
customize your PCD2000A for your personal applications.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Included in your Package  
PCD 2000A  
Operating Guide  
600 mAh Nickel-Cadmium  
Battery PCD600Ni  
PCD2000A  
Cellular Phone  
Standard Charger  
AD267  
PCD2000A  
Operating Guide  
If any of these items are missing or damaged, immediately contact your place of purchase.  
Read the Operating Guide thoroughly before operating the cellular phone.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
One Year Limited Warranty  
50 Memory Locations - Easily store and recall your most often called numbers.  
A/B Switching - Easy switching between carriers.  
Automatic Retry - Your PCD2000A automatically retries to place a call  
(up to 4 times) when the system is busy.  
Programmable Password - Use your own four-digit code.  
Auto PIN - Prevents unauthorized use of your cellular phone number  
Dual NAM (Programmable) - Can register for home service in different cities.  
Alpha Numeric Entry- Store and search for phone numbers by name or number.  
Timer Features - Timers for last call and total time are included.  
Signal Strength Meter - The LCD shows the signal strength.  
Plus these other features:  
32 Numeric Digits Per Memory Location  
10 Alpha Characters/Digits Per  
Memory Location  
Electronic Volume Controls  
Rechargeable Battery  
Pause Dialing  
Incoming Call Indicator  
Self-Storing Antenna  
Mute and Mute Indicator  
Illuminated Liquid Crystal Display (LCD)  
Battery Level Meter - The LCD shows the battery charge level.  
Low Battery Warning Signal - Reminds you to recharge the battery.  
One-Touch Emergency Dial - Call an emergency phone number by pressing a  
single key.  
Absent Call Counter - Registers unanswered calls received while in Standby Mode.  
Silent Mode - Turns off ringers and key touch tones when the minimum setting is  
selected.  
User-Programmable from Menus - Menus make customizing easy.  
Headset - Use the optional headset for hands free operation.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fast Start  
Charging the Battery  
Use only the Uniden battery  
charger supplied with your  
PCD2000A.  
1. Plug the charger into a  
wall outlet.  
2. Plug the charger jack into  
the PCD2000A.  
3. If you have the PCD1087  
extended life battery, charge  
the battery for 6 hours.  
Otherwise, charge the cellular  
battery for 5 hours.  
Battery Alarm  
A Battery Warning Tone sounds when the battery charge is low. The battery icon flashes and  
RECHARGE BATTERY displays on the LCD.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Memory Effect  
Rechargeable batteries can develop a “memory” (reduced charge capacity) caused by repeated  
charge and discharge cycles.  
Rechargeable batteries that have developed this effect will not operate to their fullest capacity.  
To Avoid Memory Effect: Operate the unit until the Rechargeable Battery is completely discharged  
before recharging. Do not “top off” the charge after using for a short time.  
Also, do not charge the Rechargeable Battery for extended periods of time.  
To Erase Memory Effect: Operate the unit until the Rechargeable Battery is completely discharged,  
then recharge fully. Repeat this process at least three (3) times.  
Antenna  
Before placing or receiving  
a call, pull antenna up until  
it clicks into place.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power  
Power ON  
Press and hold end for about  
The phone goes into the  
Idle Mode.  
one second. Digits, icons, and  
bars light briefly and then the  
Wake Up Tone sounds.  
Power OFF  
Press and hold end until you  
hear a beep — which is about  
one second.  
If a call is still in progress, power  
cannot be terminated until the  
call ends.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Calling  
To receive a call  
1. Phone rings, CALL displays  
2. Press any key (except  
and talk.  
/
< >  
)
CALL  
and the LCD flashes.  
3. To hang up, press end  
.
To make a call  
1. Enter the phone  
2. Press send.  
number,  
817  
8583300  
8178583300  
8178583300  
.
3. If you hear no sound, the call  
did not go through.The  
PCD2000A will retry the call  
up to five times.  
4. The phone number appears  
after two seconds.  
Press end to cancel  
Automatic Retry.  
8178583300  
5.To hang up, press end  
.
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Headset Menu  
For hands-free calling, you can add an optional headset. The headset menu has  
two settings: alert repeat or auto-answer.  
1. To go to the phone  
settings menu from standby,  
press menu.  
2. Press  
once.  
<
3. Press menu again.  
4. Use the  
or  
keys to  
<
>
choose between AUTO ANSWER  
or ALERT REPEAT  
Our example: ALERT REPEAT  
.
.
5. Press menu.  
6. Use the  
or  
keys to select  
<
>
one alert or three alerts.  
7. Press menu. In two seconds,  
the display returns to standby.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mute Function  
The microphone can be muted  
while on a call.  
1. To enable the mute function  
2. To disable the mute function  
press menu and again.  
press menu then  
.
0
0
Absent Call Counter  
When the PCD2000A is on, it  
registers the number of  
unanswered calls.  
CALL -03  
To redial last number called  
1. Press send  
.
2. To hang up, press end.  
8178583300  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory - Store  
Numeric  
To Store in Specific Location  
1. Enter the phone  
2. Press  
and hold about  
M
STORE#?  
8178583300  
one second.  
number,  
817  
8583300  
8178583300  
.
3. Enter the two-digit memory  
location number and  
4. To cancel, press end.  
OR  
8178583300  
18  
press  
.
M
5. If a number is already stored in  
the specified location, the  
6. Replace the previously stored  
number or press to find  
REPLACE?  
NAME INDEX  
/
< >  
the next available location. The  
NAME INDEX screen appears.  
YES  
NO  
18  
REPLACE prompt appears.  
18  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Enter the name and  
press  
8. Press  
and store the  
M
NAME INDEX  
UNIDEN  
number. The screen returns to  
Normal after 2 seconds.  
.
M
OR  
STORED  
18  
18  
To Store in Next Available Location  
1. Enter the phone  
2. Press  
and hold for  
M
STORE#?  
8178583300  
one second.  
number,  
817  
8583300  
OR  
8178583300  
NAME INDEX  
.
3. Press  
/
to store in the  
4. Enter the alpha numeric name  
< >  
NAME INDEX  
UNIDEN  
and press  
again.  
next available number location.  
NAME INDEX displays on  
the LCD.  
M
18  
18  
5. The LCD displays STORED  
two seconds and returns to  
Normal mode.  
Press end to cancel. For  
directions on entering alpha  
characters, see the table on  
page 22.  
STORED  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To call a Number in Memory  
1. Press  
.
2. Enter the two-digit memory  
location number (00 50).  
M
MEMORY#?  
-
8178583300  
18  
3. Press send. If a memory  
location of 51 or more is used,  
it is ignored.  
4. To hang up, press end.  
MEMORY  
EMPTY  
MEMORY EMPTY displays on the  
LCD if no number is stored at  
the location entered.  
To Speed Dial a Number in Memory  
1. Press the memory location  
2. Press send.  
number (00  
-
50).  
27  
Note: You don’t have to press  
two digits for Speed Dialing for  
memory locations 1 through 9.  
3. To hang up, press end  
.
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chain Dialing  
On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a  
special access code, such as when performing a banking transaction. To store this number, refer to “Memory Store" on  
page 18.  
For example, if your bank’s telephone number is stored in memory location 3, and your account number is stored in  
memory location 4:  
1. Press  
.
2. Enter  
.
03  
M
3. At the appropriate time, press  
.
N04N  
The phone sends the number and you may proceed with your transaction.  
To Enter a Pause  
1. Press  
2. Press send to dial  
123  
.
.
end  
123  
456  
123P456  
P456  
When you press end, a  
P
displays.  
3. Press send again to dial  
.
456  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Entering Characters  
This table shows the correspondence between the Numeric keys and the letters of the alphabet.  
Numeric  
Key  
Alphabet  
1
2
3
4
5
6
7
8
9
0
1
A, B, C, 2  
D, E, F, 3  
G, H, I, 4  
J, K, L, 5  
M, N, O, 6  
P, Q, R, S, 7  
T, U, V, 8  
W, X, Y, Z, 9  
0
Example: To store the letter L, press  
.
555  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example: To enter the name “JOE” in the display.  
1. After storing a numeric number  
2. Press  
4. Press  
.
5
NAME INDEX  
J
NAME INDEX  
18  
in a desired memory location,  
press and hold  
one second.  
for about  
M
18  
3. The cursor moves to the next  
position after 1 second. During  
letter entry, you can press  
.
666  
NAME INDEX  
J
NAME INDEX  
O
J
or  
to move the cursor  
18  
18  
#
*
right or left respectively.  
5. Press to move to the  
6. Press  
.
33  
#
NAME INDEX  
JO  
NAME INDEX  
JO  
next space.  
E
18  
18  
7. Press  
to store  
M
JOE  
in memory.  
STORED  
18  
18  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dialing the Emergency One-Touch Number  
Note: The Emergency One-Touch Number is factory preset at 911  
.
To Dial the Emergency One-Touch Number  
1. Make sure the power is on,  
and press and hold  
about 1 second.  
for  
9
9
911  
2. Press end to hang up.  
Memory - Phone Number Review  
1. Press  
.
2. Press  
/
< >  
.
M
UNIDEN  
8178583300  
27  
MEMORY#?  
3. To Auto Scroll, press and hold  
either . A new number  
UNION BANK  
2145403280  
36  
/
< >  
displays every half second.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory - Search  
Alpha  
1. Press  
,
M M  
.
2. Enter part of the name.  
(See page 22 for letters.)  
SEARCH  
SEARCH  
U
3. Press  
to begin searching  
4. To see next memory location  
with that name, press the  
<
UNION BANK  
2145403280  
36  
UNIDEN  
8178583300  
27  
from the lowest number (00) or  
to begin searching from the  
same key (  
/
< >  
) again.  
>
highest number (50) for the  
name entered.  
5. To call name shown,  
press send  
.
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCD2000A Setup  
Use these menus to set up the features of the PCD2000A.  
Press  
N1  
Chooses System  
Menu.  
Press  
N
< >  
System Select.  
SYSTEM  
MENU  
SYSTEM  
SELECT  
/
F1  
F2  
F3  
11  
/
< >  
Press  
N2  
Chooses Volume  
Menu.  
Press  
N
Earpiece  
Speaker  
Volume.  
EARPIECE  
VOLUME  
VOLUME  
MENU  
/
< >  
22  
/
< >  
Press  
N3  
Chooses Timer  
Menu.  
Press  
N
Total Call Timer.  
TIMER  
MENU  
TOTAL TIME  
000:00  
/
< >  
32  
< /  
>
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press  
N4  
Chooses  
Password Menu.  
Press  
N
Change  
Password.  
/
< >  
Press  
N5  
Chooses NAM  
Select.  
Press  
N
NAM #1 Select.  
NAM1:  
NAM  
SELECT  
/
< >  
m
51  
F5  
/
< >  
Press  
N6  
Chooses PIN  
Menu.  
Press  
N < >  
Enter PIN  
Number.  
/
/
< >  
Press  
N7  
Chooses  
Headset Menu.  
Press  
N
Chooses  
Auto-Answer  
Function.  
/
< >  
< /  
>
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Systems for the PCD2000A  
If the “NSVC” indicator appears, you may be out of your service area, or your system may not be set correctly.  
(See page 35 for more information.)  
1. Press  
.
2. Press  
again. Then, press  
to see other options.  
N1  
N
SYSTEM  
MENU  
SYSTEM  
SELECT  
/
< >  
F1  
11  
3. Now, press  
to select a  
4. Press  
once more to store  
N
N
any change. Or, to cancel and  
return to Standby, press end  
or clear  
system option.  
A prefer B  
SELECTED  
11  
.
11  
Setting Volumes  
Sets volume for Ringer, Earphone, Key Tone and System Busy signal.  
You can set these volumes while talking on your phone.  
1. Press  
.
2. Press  
.
M
N2  
RINGER  
VOLUME  
VOLUME  
MENU  
Note: Press  
other volume settings.  
/
to see  
< >  
F2  
21  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Select a volume and  
4. Press  
for higher  
>
<
RINGER  
L
RINGER  
L
volume, or  
for lower volume.  
press  
.
M
H
H
21  
21  
5. Press  
to store the  
N
change. Or, to cancel and  
return to Standby,  
STORED  
press end or clear  
.
21  
Setting Call Timers  
LAST CALL: Shows length of the last call made or answered (in minutes and seconds).  
TOTAL CALL: Shows total length of all calls made or answered.  
1. Press  
.
2. Press  
press  
again. Then,  
N3  
N
/
TIMER  
MENU  
LAST TIME  
000:00  
to  
< >  
select timer function.  
F3  
31  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press  
.
4. Press  
to return to  
>
N
TOTAL TIME  
000:00  
Standby. To reset the  
Total Call Timer, see the  
next section.  
Display shows total length  
of all calls made or  
answered.  
32  
Note: The Last Call Timer is reset each time you make or answer a call.  
To reset the Total Call Timer  
1. Press  
2. Press  
.
N
TIMER  
RESET  
.
N3N>>  
33  
3. Enter the password.  
(Factory preset is  
4. To reset, press  
.To cancel  
N
and return to Standby, press  
any other key.  
.)  
0123  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Password  
Set your own password to prevent unauthorized changes in your call timer.  
1. Press  
.
2. Press  
.
N
N4  
To cancel and return to  
Standby, press  
.
C
3. Press  
.
4. Type your password.  
(Factory preset is  
0123.)  
N
5. Type your new password.  
For example, enter  
6. Press  
.
N
.
1234  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Number Assignment Modules (NAM)  
NAMs prevent unnecessary long distance or ROAM charges. Your service provider can register two NAMs  
in the PCD2000A. (See page for more information.)  
1. Press  
.
2. Press  
.
N
N5  
NAM1:  
NAM  
The current NAM is shown.  
8176331234  
SELECT  
m
51  
F5  
3. To see the other NAM,  
press  
4. To select the NAM  
NAM2:  
8176331234  
shown,press  
To cancel and return to  
.
/
< >  
.
N
Standby, press end or clear  
.
m
52  
Activating the Anti-Fraud Feature  
The Anti-Fraud feature is designed to prevent unauthorized use of your Cellular Phone Number.  
1. Press 2. Press  
.
.
N
N6  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press  
5. Press  
.
4. Press  
.
>
N
.
N
To Enter Your Personal Identification Number (PIN)  
1. Press  
.
2. Press  
4. Press  
.
.
N6  
N
N
3. Press  
.
>
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Enter your password.  
Factory preset is 0123.  
6. Enter the new PIN.  
For example, enter  
.
1234  
7. Press  
.
N
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Functions  
When you travel, your PCD2000A has several advanced System Selection  
functions that can put your cellular in service, or eliminate  
unnecessary long distance or ROAM charges. These  
functions are:  
When you re traveling, you may need to change your A/B  
System so you can eliminate the NO SERVICE indicator.  
You may also need to select a different system whenever  
you change the telephone number or select the  
programmed SID. Some systems are “wireline”  
(conventional telephone network), and some are  
“non-wireline.” Ask your service provider for more  
information about these systems.  
2 NAM (Number Assignment Module) Selections  
System Selection  
SID (System Identification) Selection  
SID Inhibit  
The various Modes are:  
See your Uniden Dealer for more explanation of, and  
assistance with these functions.  
A-ONLY  
A TO B  
B-ONLY  
B TO A  
To access any of these functions , see page 26.  
NAM Selection  
HOME ONLY SID ONLY  
Before changing your system, check and record the  
present system setting.  
If you regularly travel between two different cities, you  
can have a different telephone number (NAM) assigned  
to each location. If ROAM is displayed, and you are in  
one of your NAM locations, then you need to select the  
proper NAM (NAM 1 or NAM 2).  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you see NSVC on the display for more than a few  
use your cellular phone, check with your cellular service  
seconds, the phone is an area that will not support operation company before leaving your Home area. They will give  
in the selected Mode. You must then choose another.  
you information about registering and operating your  
cellular phone in a particular area.  
Modes A-ONLY and B-ONLY are used when you travel in  
areas other than your home area and the cellular coverage In some cities, depending upon your cellular service  
is strong wherever you go. If the cellular phone is out of the company, no registration will be required. You may dial  
service provider’s cellular coverage, NSVC is displayed. If your phone as if you were traveling in your Home area.  
you are in a system opposite to your Home System, ROAM However, if you call a number local to the area in which you  
is displayed.  
are roaming, first dial the area code of the local number (no  
need to dial 1 first), then the rest of the phone number.  
Keep in mind that calls to your Home area may incur long  
distance charges.  
HOME is used within your Home Area. It is the system you  
are authorized on. When you are out of your Home Area,  
NSVC is displayed.  
Other areas will require advanced registration. with a major  
credit card, or may require that al long distance calls be  
dialed using a telephone credit card or other charge  
method (collect, third telephone number). Your cellular  
service company can give you the information before you  
make the trip. If that is not possible, simply dialing a call  
will, in many cases, provide needed information.  
A TO B and B TO A are used when you travel in areas  
where cellular coverage is weak or split into several system  
types. This allows you to avoid switching back and forth  
manually, reducing the chances of missing calls. However,  
you may incur double roaming charges.  
Roaming  
Many carriers (airtime providers) make arrangements with  
carriers in other cities to allow use of mobile telephones in  
areas other than your Home area. If you are traveling in an  
area where cellular service is provided, and you wish to  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You may hear a recording (no airtime charge) that gives  
procedures for roaming calls and connects you  
immediately (during business hours) to a registration  
clerk. If you cannot obtain roaming services on one  
carrier, try switching to the other type. It is important to  
remember that the ROAM indicator does not mean the  
phone is authorized to make calls; only that a system  
other than the Home system is detected.  
SID (System Identification)  
In general, metropolitan areas are served by more that  
one service provider. Under certain circumstances you  
may be roaming in an area that has two A systems or two  
B systems that overlap, and you could be charged two  
roaming charges. To prevent this double charging,  
program the System Identification Number (SID) for that  
area and then activate the number when you are in that  
location. (You will get the SID form the service provider in  
that location.)  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Accessories and Replacement Parts  
PCD 2000A  
Operating Guide  
Standard Charger  
AD267  
Battery  
Eliminator/Charger  
PCD1004  
600mAh NiCd  
Standard Battery  
PCD600Ni  
Operating Guide  
Quick Charger  
Dual port  
PCD1085  
850mAh Slim  
Nickel-Metal  
Hydride Battery  
PCD1087  
850 mAh  
1200 mAh  
Extended Life  
Battery PCD1086  
NiCd Rechargeable  
Battery PCD1080  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Channels:  
832  
Frequency Range:  
Receive:  
Transmit:  
869.04 to 893.97 MHz  
824.04 to 848.97 MHz  
Channel Spacing:  
Duplex spacing:  
Frequency Stability:  
Receiver Sensitivity:  
30 kHz  
45 MHz  
+/- 2.5 ppm  
-116 dBm at -4°F to +122°F 5.3 V +/-10%  
-113 dBm at -22°F to +140°F 5.3 V +/- 15%  
0.6 W — 6.3 mW (6 levels in 4 dB steps)  
Data - FSK Voice - FM (with compander)  
Illuminated Liquid Crystal  
ERP:  
Modulation:  
Display:  
Power:  
5.3 VDC +/- 10%  
(as supplied by specified battery eliminator or battery charger accessory)  
Standby 45 mA (Typical), (approx. 15 hours)  
TX 440 mA (Typical), (approx. 1.6 hours)  
-22°F to +140°F  
Model PCD1080/PCD1086/PCD1087  
6"H x 2 3/16"W x 1 1/4"D (with antenna stored)  
7.9 oz.  
Battery Drain:  
Operating Temperature:  
Battery Pack:  
Size of Phone and Battery:  
Weight:  
Specifications are typical and subject to change without notice.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
One Year Limited Warranty  
ONE YEAR LIMITED WARRANTY, BATTERY & ACCESSORIES 90 DAYS  
IMPORTANT: Evidence of original purchase is required for warranty service.  
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and  
craftsmanship with only the limitations or exclusions set out below. Batteries and accessories are warranted for 90 days.  
WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale.  
The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any  
conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an  
authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of  
any system not manufactured by Uniden, or (F) installed, or programmed by anyone other than as detailed by the operating guide for this product.  
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor  
willeither, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and  
handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit  
with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE  
PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED  
OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the  
above limitation or exclusion may not apply to you.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is  
void outside the United States of America.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in this Operating Guide you are certain that the  
Product is defective, pack the Product carefully (preferably in its original packaging). The Product should include all parts and accessories originally  
oackaged with the prosuct. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should  
be shipped freight prepaid, by traceable means, to warrantor at:  
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Blvd.  
Ft. Worth, TX 76155  
(800) 364-1944, 8 AM to 5 PM Central, Monday through Friday  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teledex Cordless Telephone AC8105S User Manual
Toshiba Computer Drive WD10JPVT User Manual
Toshiba CRT Television 13A26C User Manual
Toshiba VCR W808 User Manual
Traulsen Refrigerator RRI264LPUT FHS User Manual
Tripp Lite Switch B132 004A User Manual
Troy Bilt Tiller 634K ProLine User Manual
Viper Automobile Alarm Model 330V User Manual
Vuzix Flat Panel Television VA370M User Manual
Walker Indoor Furnishings W52C4DOBL User Manual