User’s Manual
Satellite U500/U500D
Satellite Pro U500/U500D
PORTÉGÉ M900/M900D
Download from Www.Somanuals.com. All Manuals Search And Download.
LAN................................................................................................. 4-42
User’s Manual
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Security lock.................................................................................. 8-13
Chapter 9: Troubleshooting
iv
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: TOSHIBA PC Health Monitor
User’s Manual
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
© 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws,
this manual cannot be reproduced in any form without the prior written permission
of TOSHIBA. No patent liability is assumed, with respect to the use of the
information contained herein.
TOSHIBA Satellite U500/U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/
M900D Series Portable Personal Computer User’s Manual
First edition May 2009
Copyright authority for music, movies, computer programs, databases, and
other intellectual property covered by copyright laws belongs to the author or the
copyright owner. Copyrighted material can be reproduced only for personal use
or use within the home. Any other use beyond that stipulated above (including
conversion to digital format, alteration, transfer of copied material and distribution
on a network) without the permission of the copyright owner is a violation of
copyright or author’s rights and is subject to civil damages or criminal action.
Please comply with copyright laws in making any reproduction from this manual.
Disclaimer
This manual has been validated and reviewed for accuracy. The instructions
and descriptions it contains are accurate for the TOSHIBA Satellite U500/
U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/M900D Series Portable
Personal Computer at the time of this manual’s production. However, succeeding
computers and manuals are subject to change without notice. TOSHIBA assumes
no liability for damages incurred directly or indirectly from errors, omissions or
discrepancies between the computer and the manual.
Trademarks
Microsoft, Windows® and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
DirectX, AcriveDesktop, DirectShow, and Windows Media are registerd
trademarks of Microsoft Corporation.
Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered
trademarks of Intel Corporation or its subsidiaries in the United States and other
countries.
Adobe and Photoshop are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Bluetooth™ is a registered trademark owned by its proprietor and used by
TOSHIBA under license.
ConfigFree is a trademark of TOSHIBA Corporation.
DVD MovieFactory is trademarks of the Corel Systems. Inc.
vi
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby is a registered trademark of Dolby Laboratories.
ExpressCard is a trade mark of PCMCIA.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Labelflash™ is a trademark of YAMAHA CORPORATION.
Memory Stick and Memory Stick PRO are registered trademarks of
SonyCorporation.
MultiMediaCard and MMC are trademarks of MultiMediaCard Association.
Photo CD is a trademark of Eastman Kodak.
Secure Digital and SD are trademarks of SD Card Association.
xD-Picture Card is a trademark of Fuji Photo Film, Co., Ltd.
Wi-Fi is as registered trademark of the Wi-Fi Alliance.
Other trademarks and registered trademarks not listed above may be used in this
manual.
FCC information
FCC notice “Declaration of Conformity
Information”
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
n
n
n
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
n
Consult the dealer or an experienced radio/TV technician for help.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Only peripherals complying with the FCC class B limits may be attached to
this equipment. Operation with non-compliant peripherals or peripherals not
recommended by TOSHIBA is likely to result in interference to radio and TV
reception. Shielded cables must be used between the external devices and
the computer’s external monitor port, USB port, serial port, parallel port, PS/2
mouse/keyboard port and microphone jack. Changes or modifications made to
this equipment, not expressly approved by TOSHIBA or parties authorized by
TOSHIBA could void the user’s authority to operate the equipment.
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Contact
Address:
TOSHIBA America Information Systems, Inc.
9740 Irvine Boulevard
Irvine, California 92618-1697
(949) 583-3000
Telephone:
viii
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
EU Conformity of Statement
This product and - if applicable - the supplied accessories too are marked with
‘CE’ and comply therefore with the applicable harmonized European standards
listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/
EC and/or R&TTE Directive 1999/5/EC.
Responsible for CE- TOSHIBA EUROPE GMBH, Hammfelddamm 8,
marking:
41460 Neuss, Germany.
Manufacturer:
Toshiba Corporation, 1-1 Shibaura 1-chome,
Minato-ku, Tokyo, 105-8001, Japan.
The complete official EU CE Declaration can be obtained on following internet
page:
http://epps.toshiba-teg.com/
VCCI Class B Information
この装置は、情
くクラスB 情報技術装置です。この装置は、家庭環境で使用することを目的とし
ていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、
受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをし
て下さい。
報処理装置等電波障害自主規制協議会（VCCI)の基 準に基
づ
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
Canadian Regulatory Information (Canada Only)
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the Radio Interference Regulation of the
Canadian Department of Communications.
Note that Canadian Department of Communications (DOC) regulations provide,
that changes or modifications not expressly approved by TOSHIBA Corporation
could void your authority to operate this equipment.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la class B respecte toutes les exgences du Règlement
sur le matériel brouileur du Canada.
Modem warning notice
Conformity Statement
The equipment has been approved to [Council Decision 98/482/EC - “TBR 21”]
for pan-European single terminal connection to the Public Switched Telephone
Network (PSTN).
However, due to differences between the individual PSTNs provided in different
countries/regions the approval does not, of itself, give an unconditional assurance
of successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first
instance.
Network Compatibility Statement
This product is designed to work with, and is compatible with the following
networks. It has been tested to and found to conform with the additional
requirements conditional in EG 201 121.
Germany
ATAAB AN005,AN006,AN007,AN009,AN010 and
DE03,04,05,08,09,12,14,17
Greece
ATAAB AN005,AN006 and GR01,02,03,04
ATAAB AN001,005,006,007,011 and
Portugal
P03,04,08,10
Spain
ATAAB AN005,007,012, and ES01
ATAAB AN002
Switzerland
All other countries/
ATAAB AN003,004
regions
x
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Specific switch settings or software setup are required for each network. Refer to
the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate national
type approvals. It has not been tested for conformity to national type regulations,
and no guarantee of successful operation of that specific function on specific
national networks can be given.
Japan regulations
Region selection
If you are using the computer in Japan, technical regulations described in the
Telecommunications Business Law require that you select the Japan country
mode. It is illegal to use the modem in Japan with any other selection.
Redial
Up to two redial attempts can be made. If more than two redial attempts are
made, the modem will return Black Listed. If you are experiencing problems with
the Black Listed code, set the interval between redials at one minute or longer.
Japan’s Telecommunications Business Law permits up to two redials on analogue
telephones, but the redials must be made within a total of three minutes.
The internal modem is approved by Japan Approvals Institute for
Telecommunications Equipment.
A05-0413001
This label is located on the module.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xi
A05-0025001
This label is located on the module.
xii
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Pursuant to FCC CFR 47, Part 68:
When you are ready to install or use the modem, call your local telephone
company and give them the following information:
n
n
The telephone number of the line to which you will connect the modem.
The registration number that is located on the device
LSI US : AGSMD01BDELPHI
MOTOROLA US: S56MD01B13054
The FCC registration number of the modem will be found on either the device
which is to be installed, or, if already installed, on the bottom of the computer
outside of the main system label.
n
The Ringer Equivalence Number (REN) of the modem, which can vary.
For the REN of your modem, refer to your modem’s label.
The modem connects to the telephone line by means of a standard jack called
the USOC RJ11C.
Type of service
Your modem is designed to be used on standard-device telephone lines.
Connection to telephone company-provided coin service (central office
implemented systems) is prohibited. Connection to party lines service is subject to
state tariffs.
If you have any questions about your telephone line, such as how many pieces
of equipment you can connect to it, the telephone company will provide this
information upon request.
Telephone company procedures
The goal of the telephone company is to provide you with the best service it can.
In order to do this, it may occasionally be necessary for them to make changes
in their equipment, operations, or procedures. If these changes might affect your
service or the operation of your equipment, the telephone company will give
you notice in writing to allow you to make any changes necessary to maintain
uninterrupted service.
If problems arise
If any of your telephone equipment is not operating properly, you should
immediately remove it from your telephone line, as it may cause harm to the
telephone network. If the telephone company notes a problem, they may
temporarily discontinue service. When practical, they will notify you in advance of
this disconnection.
If advance notice is not feasible, you will be notified as soon as possible. When
you are notified, you will be given the opportunity to correct the problem and
informed of your right to file a complaint with the FCC. In the event repairs are
ever needed on your modem, they should be performed by TOSHIBA Corporation
or an authorized representative of TOSHIBA Corporation.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xiii
Disconnection
If you should ever decide to permanently disconnect your modem from its present
line, call the telephone company and let them know of this change.
Fax branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person
to use a computer or other electronic device to send any message via a telephone
fax machine unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission, the date
and time it is sent and an identification of the business, other entity or individual
sending the message and the telephone number of the sending machine or such
business, other entity or individual. In order to program this information into your
fax modem, you should complete the setup of your fax software before sending
messages.
n
Use only No.26AWG or larger UL listed or CSA certified
telecommunication line cord.
Instructions for IC CS-03 certified equipment
1. NOTICE: The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain telecommunications
network protective, operational and safety requirements as prescribed in
the appropriate Terminal Equipment Technical Requirements document(s).
The Department does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions may
not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to
this equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure, for their own protection, that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas.
Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as
appropriate.
xiv
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2. The user manual of analog equipment must contain the equipment’s Ringer
Equivalence Number (REN) and an explanation notice similar to the following:
The Ringer Equivalence Number (REN) of the modem, which can vary. For
the REN of your modem, refer to your computer’s user’s manual.
The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
3. The standard connecting arrangement (telephone jack type) for this
equipment is jack type(s): USOC RJ11C
The IC registration number of the modem is shown below:
LSI Canada: 4005B-DELPHI
MOTOROLA Canada: 109AH-ML3054
Notes for Users in Australia and New Zealand
Modem warning notice for Australia
Modems connected to the Australian telecoms network must have a valid Austel
permit. This modem has been designed to specifically configure to ensure
compliance with Austel standards when the country/region selection is set to
Australia. The use of other country/region setting while the modem is attached
to the Australian PSTN would result in you modem being operated in a non-
compliant manner. To verify that the country/region is correctly set, enter the
command ATI9 which displays the currently active setting.
To set the country/region permanently to Australia, enter the following command
sequence:
AT+GCI=09
Failure to set the modem to the Australia country/region setting as shown above
will result in the modem being operated in a non-compliant manner. Consequently,
there would be no permit in force for this equipment and the Telecoms Act 1991
prescribes a penalty of $12,000 for the connection of non-permitted equipment.
Notes for use of this device in New Zealand
n
The grant of a Telepermit for a device in no way indicates Telecom acceptance
of responsibility for the correct operation of that device under all operating
conditions. In particular the higher speeds at which this modem is capable of
operating depend on a specific network implementation which is only one of
many ways of delivering high quality voice telephony to customers. Failure to
operate should not be reported as a fault to Telecom.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xv
n
In addition to satisfactory line conditions a modem can only work properly if:
a/ it is compatible with the modem at the other end of the call; and
b/ the application using the modem is compatible with the application at the
other end of the call such as accessing the Internet requires suitable
software in addition to a modem.
n
n
This equipment shall not be used in any manner which could constitute a
nuisance to other Telecom customers.
Some parameters required for compliance with Telecom’s PTC Specifications
are dependent on the equipment (PC) associated with this modem. The
associated equipment shall be set to operate within the following limits for
compliance with Telecom Specifications:
a/ There shall be no more than 10 call attempts to the same number
within any 30 minute period for any single manual call initiation;
b/ The equipment shall go on-hook for a period of not less than 30 seconds
between the end of one attempt and the beginning of the next; and
c/ Automatic calls to different numbers shall be not less than 5 seconds
apart.
n
n
Immediately disconnect this equipment should it become physically damaged,
and arrange for its disposal or repair.
The correct settings for use with this modem in New Zealand are as follows:
ATB0 (CCITT operation)
AT&G2 (1800 Hz guard tone)
AT&P1 (Decadic dialling make-break ratio = 33%/67%)
ATS0=0 (not auto answer)
ATS10=less than 150 (loss of carrier to hang up delay, factory default of 15
recommended)
ATS11=90 (DTMF dialling on/off duration=90 ms)
ATX2 (Dial tone detect, but not (U.S.A.) call progress detect)
n
n
When used in the Auto Answer mode, the S0 register must be set with a value
of 3 or 4. This ensures:
n
a person calling your modem will hear a short burst of ringing before the
modem answers. This confirms that the call has been successfully
switched through the network.
n
caller identification information (which occurs between the first and
second ring cadences) is not destroyed.
The preferred method of dialing is to use DTMF tones (ATDT...) as this is
faster and more reliable than pulse (decadic) dialing. If for some reason you
must use decadic dialing, your communications program must be set up to
record numbers using the following translation table as this modem does not
implement the New Zealand “Reverse Dialing” standard.
Number to be dialed: 0 1 2 3 4 5 6 7 8 9
xvi
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Number to program into computer: 0 9 8 7 6 5 4 3 2 1
Note that where DTMF dialing is used, the numbers should be entered
normally.
n
The transmit level from this device is set at a fixed level and because of this
there may be circumstances where the performance is less than optimal.
Before reporting such occurrences as faults, please check the line with
a standard Telepermitted telephone, and only report a fault if the phone
performance is impaired.
n
n
n
It is recommended that this equipment be disconnected from the Telecom line
during electrical storms.
When relocating the equipment, always disconnect the Telecom line
connection before the power connection, and reconnect the power first.
This equipment may not be compatible with Telecom Distinctive Alert
cadences and services such as FaxAbility.
NOTE THAT FAULT CALLOUTS CAUSED BY ANY OF THE ABOVE
CAUSES MAY INCUR A CHARGE FROM TELECOM
General conditions
As required by PTC 100, ensure that this office is advised of any changes to the
specifications of these products which might affect compliance with the relevant
PTC Specifications.
The grant of this Telepermit is specific to the above products with the marketing
description as stated on the Telepermit label artwork. The Telepermit may not be
assigned to other parties or other products without Telecom approval.
A Telepermit artwork for each device is included from which you may prepare any
number of Telepermit labels subject to the general instructions on format, size,
and colour on the attached sheet.
The Telepermit label must be displayed on the product at all times as proof to
purchasers and service personnel that the product is able to be legitimately
connected to the Telecom network.
The Telepermit label may also be shown on the packaging of the product and in
the sales literature, as required in PTC 100.
The charge for a Telepermit assessment is $337.50. An additional charge of
$337.50 is payable where an assessment is based on reports against non-
Telecom New Zealand Specifications. $112.50 is charged for each variation when
submitted at the same time as the original.
An invoice for $NZ1237.50 will be sent under separate cover.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xvii
Following information is only for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products
must be collected and disposed of separately from household waste.
Integrated batteries and accumulators can be disposed of with the
product. They will be separated at the recycling centres.
The black bar indicates that the product was placed on the market after
August 13, 2005.
By participating in separate collection of products and batteries, you will
help to assure the proper disposal of products and batteries and thus
help to prevent potential negative consequences for the environment
and human health.
For more detailed information about the collection and recycling
programmes available in your country, please visit our website (http://
eu.computers.toshiba-europe.com) or contact your local city office or
the shop where you purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries
and/or accumulators must be collected and disposed of separately from
household waste.
If the battery or accumulator contains more than the specified values
of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery
Directive (2006/66/EC), then the chemical symbols for lead (Pb),
mercury (Hg) and/or cadmium (Cd) will appear below the crossed out
wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to
assure the proper disposal of products and batteries and thus help
to prevent potential negative consequences for the environment and
human health.
For more detailed information about the collection and recycling
programmes available in your country, please visit our website (http://
eu.computers.toshiba-europe.com) or contact your local city office or
the shop where you purchased the product.
This symbol may not be displayed depending on the country and region where
you purchased
xviii
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposing of the computer and the computer’s
batteries
n
Discard this computer in accordance with applicable laws and regulations. For
further information, contact your local government.
n
This computer contains rechargeable batteries. After repeated use, the
batteries will finally lose their ability to hold a charge and you will need to
replace them. Under certain applicable laws and regulations, it may be illegal
to dispose of old batteries by placing them in the trash.
n
Please be kind to our shared environment. Check with your local government
authority for details regarding where to recycle old batteries or how to
dispose of them properly. Disposal of this material may be regulated due to
environmental considerations. For disposal, reuse or recycling information,
please contact your local government.
EnergyStar® Program
Your computer model may be Energy Star® Compliant.
If the model you purchased is compliant, it is labeled
with the ENERGY STAR logo on the computer and the
following information applies. TOSHIBA. is a partner in
the Environmental Protection Agency’s (EPA) Energy Star
Program and has designed this computer to meet the latest
Energy Star guidelines for energy efficiency. Your computer
ships with the power management options preset to a
configuration that will provide the most stable operating environment and optimum
system performance for both AC power and battery modes.
To conserve energy, your computer is set to enter the low-power Sleep Mode
which shuts down the system and display within 15 minutes of inactivity in AC
power mode. We recommend that you leave this and other energy saving features
active, so that your computer will operate at its maximum energy efficiency. You
can wake the computer from Sleep Mode by pressing the power button.
According to the EPA, a computer meeting the new ENERGY STAR specifications
will use between 20% and 50% less energy depending on how it is used. If all
U.S. household and businesses replaced old computers with new ENERGY STAR
qualified models, we would save more than $1.8 billion in energy costs over the
next five years and avoid greenhouse gas emissions equivalent to more than 2.7
million cars.
If every computer purchased by businesses next year met the new ENERGY
STAR requirements, businesses would save more than $210 million over the
lifetime of those models. That is equivalent to lighting 120 million square feet of
U.S. commercial building space each year.
for more information regarding the ENERGY STAR Program.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xix
Optical disc drive safety instructions
Be sure to check the international precautions at the end of this section.
Panasonic
DVD Super Multi (+R Double Layer) UJ862A/VJ862E
n
The DVD Super Multi Double Layer drive employs a laser system. To
ensure proper use of this product, please read this instruction manual
carefully and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.
n
n
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open
enclosure.
xx
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Hitachi-LG Data Storage, Inc.
DVD Super Multi (+R Double Layer) GU10N/GU10F
n
The DVD Super Multi Double Layer drive employs a laser system. To
ensure proper use of this product, please read this instruction manual
carefully and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.
n
n
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open
enclosure.
User’s Manual
xxi
Download from Www.Somanuals.com. All Manuals Search And Download.
Hitachi-LG Data Storage, Inc.
DVD Super Multi (+R Double Layer) GS20F
n
The DVD Super Multi Double Layer drive employs a laser system. To
ensure proper use of this product, please read this instruction manual
carefully and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.
n
n
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open
enclosure.
xxii
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
International Precaution
CAUTION: This appliance contains a laser system and
is classified as a “CLASS 1 LASER PRODUCT.” To
use this model properly, read the manual carefully and
keep it for your future reference. In case of any trouble
with this model, contact your nearest AUTHORIZED
service center.
To prevent direct exposure to the laser beam, do not try
to open the enclosure.
VORSICHT: Dieses Gerät enthält ein Laser-System
und ist als “LASERSCHUTZKLASSE 1 PRODUKT”
klassifiziert. Für den richtigen Gebrauch dieses Modells
lesen Sie bitte die Bedienungsanleitung sorgfältig
durch und bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten, benachrichtigen
Sie bitte die nächste autorisierte Service-Vertretung.
Um einen direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet werden.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xxiii
ADVARSEL: Denne mærking er anbragt udvendigt
på apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hviket betyder, at der
anvendes laserstrlier af svageste klasse, og at man
ikke på apparatets yderside kan bilve udsat for
utilladellg kraftig stråling.
APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER MED
LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her gengivne
advarselsmækning, som advarer imod at foretage
sådanne indgreb i apparatet, at man kan komme til
at udsætte sig for laserstråling.
OBS! Apparaten innehåller laserkomponent som
avger laserstråining överstigande gränsen för
laserklass 1.
VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.
CAUTION: USE OF CONTROLS, ADJUSTMENTS,
OR PROCEDURES OTHER THAN THOSE
SPECIFIED IN THIS MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS DURCHFÜHREN
VON ANDEREN VORGÄNGEN ALS
IN DER BEDIENUNGSANLEITUNG
BESCHRIEBEN KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE HABEN.
xxiv
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
General Precautions
TOSHIBA computers are designed to optimize safety, minimize strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury or damage to thecomputer.
Be certain to read the general precautions below and to note the cautions included
in the text of the manual.
Providing adequate ventilation
n
Always make sure your computer and AC adaptor have adequate ventilation
and protected from overheating when the power is turned on or when the
AC adaptor is connected to a power outlet (even if your computer is in Sleep
Mode). In this condition, observe the following:
n
n
Never cover your computer or AC adaptor with any object.
Never place your computer or AC adaptor near a heat source, such as an
electric blanket or heater.
n
n
Never cover or block the vents including those located at the base of the
computer.
Always operate your computer on a hard flat surface. Using your
computer on a carpet or a soft material can block the vents.
n
n
Always provide sufficient space around the computer.
Overheating your computer or AC adaptor could cause system failure,
computer or AC adaptor damage or fire, possibly resulting in a serious injury.
Creating a computer-friendly environment
Place the computer on a flat surface that is large enough for the computer and
any other items you are using, such as a printer.
Leave enough space around the computer and other equipment to provide
adequate ventilation. Otherwise, they may overheat.
To keep your computer in prime operating condition, protect your work area from:
n
n
Dust, moisture, and direct sunlight.
Equipment that generates a strong electromagnetic field, such as stereo
speakers (other than speakers that are connected to the computer) or
speakerphones.
n
Rapid changes in temperature or humidity and sources of temperature change
such as air conditioner vents or heaters.
n
n
Extreme heat, cold, or humidity.
Liquids and corrosive chemicals.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xxv
Stress injury
Carefully read the Instruction Manual for Safety and Comfort. It contains
information on the prevention of stress injuries to your hands and wrists that can
be caused by extensive keyboard use.
Heat injury
n
Avoid prolonged physical contact with the computer. If the computer is used
for long periods, its surface can become very warm. While the temperature will
not feel hot to the touch, if you maintain physical contact with the computer
for a long time, for example if you rest the computer on your lap or if you keep
your hands on the palm rest, your skin might suffer a low-heat injury.
n
n
If the computer has been used for a long time, avoid direct contact withthe
metal plate supporting the various interface ports as this can become hot.
The surface of the AC adaptor can become hot when in use but this condition
does not indicate a malfunction. If you need to transport the AC adaptor, you
should disconnect it and let it cool before moving it.
n
Do not lay the AC adaptor on a material that is sensitive to heat as the
material could become damaged.
Pressure or impact damage
Do not apply heavy pressure to the computer or subject it to any form of strong
impact as this can damage the computer’s components or otherwise cause it to
malfunction.
ExpressCard overheating
Some ExpressCards can become hot during prolonged use which may result
in errors or instability in the operation of the device in question. In addition, you
should also be careful when you remove a PC or ExpressCard that has been used
for a long time.
Mobile phones
Please be aware that the use of mobile phones can interfere with the audio
system. The operation of the computer will not be impaired in any way, but it
is recommended that a minimum distance of 30cm is maintained between the
computer and a mobile phone that is in use.
Instruction Manual for Safety and Comfort
All important information on the safe and proper use of this computer is described
in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it
before using the computer.
xxvi
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Preface
Congratulations on your purchase of the TOSHIBA Satellite U500/U500D, Satellite
Pro U500/U500D, PORTÉGÉ M900/M900D Series computer. This powerful
notebook computer provides excellent expansion capability, including multimedia
devices, and it is designed to provide years of reliable, high-performance
computing.
This manual tells how to set up and begin using your TOSHIBA Satellite U500/
U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/M900D Series computer. It
also provides detailed information on configuring your computer, basic operations
and care, using optional devices and troubleshooting.
If you are a new user of computers or if you’re new to portable computing, first
with the computer’s features, components and accessory devices. Then read
Getting Started for step-by-step instructions on setting up your computer.
If you are an experienced computer user, please continue reading the preface
to learn how this manual is organized, then become acquainted with this manual
of the Introduction, to learn about features that are uncommon or unique to the
computer. If you are going to install PC Cards or connect external devices such as
Manual contents
This manual is composed of the following nine chapters, five appendixes, a
glossary and an index.
and options.
explains how they function.
your computer and gives tips on safety and designing your work area.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xxvii
TouchPad, Sound System, optical media drives, modem, wireless communication
and LAN. It also provides tips on care of the computer, and CD/DVDs.
keypad overlay and hot keys.
resources and battery save modes.
program.
diagnostic tests, and suggests courses of action if the computer doesn’t seem to
be working properly.
acronyms used in the text.
Conventions
This manual uses the following formats to describe, identify, and highlight terms
and operating procedures.
Abbreviations
On first appearance, and whenever necessary for clarity, abbreviations are
enclosed in parentheses following their definition. For example: Read Only
Memory (ROM). Acronyms are also defined in the Glossary.
Icons
Icons identify ports, dials, and other parts of your computer. The indicator panel
also uses icons to identify the components it is providing information on.
Keys
The keyboard keys are used in the text to describe many computer operations. A
distinctive typeface identifies the key top symbols as they appear on the keyboard.
For example, Enter identifies the Enter key.
xxviii
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Key operation
Some operations require you to simultaneously use two or more keys. We
identify such operations by the key top symbols separated by a plus sign (+). For
example, Ctrl + C means you must hold down Ctrl and at the same time press
C. If three keys are used, hold down the first two and at the same time press the
third.
ABC
When procedures require an action such as clicking an icon or
entering text, the icon’s name or the text you are to type in is
represented in the type face you see to the left.
Display
Names of windows or icons or text generated by the computer
that appears on its display screen is presented in the type face
you see to the left.
ABC
Messages
Messages are used in this manual to bring important information to your attention.
Each type of message is identified as shown below.
Pay attention! A caution informs you that improper use of equipment or failure
to follow instructions may cause data loss or damage your equipment.
Please read. A note is a hint or advice that helps you make best use of your
equipment.
Indicates a potentially hazardous situation, which could result in death or
serious injury, if you do not follow instructions.
Terminology
This term is defined in this document as follows:
” button in Microsoft®
Start
The word “Start” refers to the “
Windows® Vista™.
User’s Manual
xxix
Download from Www.Somanuals.com. All Manuals Search And Download.
xxx
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 1
Introduction
This chapter provides an equipment checklist, and identifies the computer’s
features, options, and accessories.
Some of the features described in this manual may not function properly if you
use an operating system that was not pre-installed by TOSHIBA.
Equipment checklist
Carefully unpack your computer. Save the box and packing materials for future
use.
Hardware
Check to make sure you have all the following items:
n
TOSHIBA Satellite U500/U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/
M900D Series Portable Personal Computer
n
n
n
Universal AC adaptor and power cord
Battery pack (is pre-installed in computer)
Clearing cloth (is included with some models)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-1
Introduction
Software
The following Windows® operating system and utility software are pre-installed:
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Microsoft® Windows Vista™
TOSHIBA Value Added Package
TOSHIBA Recovery Disc Creator
TOSHIBA DVD Player
TOSHIBA SD Memory Utilites
TOSHIBA Assist
TOSHIBA ConfigFree™
TOSHIBA HDD Protection
TOSHIBA Disc Creator
TOSHIBA Face Recognition*
TOSHIBA USB Sleep and Charge Utility*
Bluetooth Stack for Windows by TOSHIBA*
TOSHIBA PC Health Monitor
Fingerprint Utility (Can be used only for Fingerprint utility models.)
Windows® Mobile Center
Online Manual
* The software is pre-installed with some models.
Documentation
n
Satellite U500/U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/M900D
Personal Computer User’s Manual
n
Satellite U500/U500D, Satellite Pro U500/U500D, PORTÉGÉ M900/M900D
Personal Computer Quickstart
n
n
Instruction Manual for Safety and Control
Warranty information
If any of the items are missing or damaged, contact your dealer immediately.
1-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Features
Please visit your region’s web site for the configuration details of the model that
you have purchased.
Processor
Built-in
Your computer is equipped with one processor
and processor type varies depending on model.
To check which type of processor is inclued in
your model, open the TOSHIBA PC Diagnostic
Tool Utility by clicking Start
TOSHIBA Utilities
All Programs
PC Diagnostic Tool.
Memory
Slots
PC2-6400 1GB, 2GB, or 4GB
Up to 4GB memory module can be installed in
the memory slot for a maximum of 8GB system
memory.
The actual amount of useable system memory will
be less than the installed memory modules.
Video RAM
The memory in a computer’s graphics adaptor
used to store the image displayed on a bitmap
display.
The amount of Video RAM available is dependent
on the computer’s system memory.
Start
Personalization
Display Settings.
Control Panel
Appearance and
Personalization
The amount of Video RAM can be verified by
clicking the Advanced Settings... button in the
Display Settings window.
If your computer is configured with more than 3 GB memory, the memory
might be displayed as approximately 3 GB only (depending on the computer’s
hardware specifications).
This is correct because the operating system usually displays the available
memory instead of the physical memory (RAM) built into the computer.
Various system components (like the video adapter’s GPU and PCI devices
like Wireless LAN, etc.) require their own memory space. Since a 32-bit
operating system cannot address more than 4 GB of memory, these system
resources overlap the physical memory. It is a technical limitation that the
overlapped memory is not available to the operating system. Even though
some tools might display the actual physical memory built into your computer,
the memory available to the operating system will still be approximately 3 GB
only.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3
Introduction
Power
Battery Pack
Your computer is powered by a rechargeable
lithium-ion battery pack.
RTC Battery
AC Adaptor
The internal RTC battery backs up the Real Time
Clock and calendar.
The AC adaptor provides power to the system
and recharges the batteries when they are low.
It comes with a detachable power cord that will
either have a 2-pin or 3-pin plug enclosure.
Because it is universal, it can receive a range of
AC voltage from 100 to 240 volts. However, the
output current varies among different models.
Using the wrong model can damage your
Disks
Hard Disk Drive
(HDD) or Solid
State Drive (SSD)
This computer is equipped with one of the
following hard disk drive (HDD) or solid state drive
(SSD) types. The capacity of each HDD or SSD
model is different.
n
HDD
120 GB
n
n
n
n
n
n
n
160 GB
200 GB
250 GB
320 GB
400 GB
500 GB
n
SSD
64 GB
n
Please note that part of the hard disk or solid
state drive’s overall capacity is reserved as
administration space.
Other hard disk drives may be introduced in the
future.
n
n
In this manual, the word “HDD” or “Hard disk drive” also refers to SSD
unless otherwise stated.
SSD is a large-capacity storage media which uses Solid-State Memory in
place of a magnetic disk of the hard disk.
Under certain unusual conditions of prolonged non-use and/or exposure to
high temperatures, the SSD may be vulnerable to data retention errors.
1-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Optical disc drive
DVD Super Multi
(+-R DL) drive
Some models are equipped with a full-size DVD
Super Multi (+-R DL) drive module that allows you
to record data to rewritable CD/DVDs as well as
run CD/DVDs without using an adaptor. It reads
DVD-ROMs at maximum 8 speed and CD-ROMs
at maximum 24 speed. It writes CD-R at up to 24
speed, CD-RW at up to 24 speed, DVD-R at up to 8
speed, DVD-RW at up to 6 speed, DVD-RAM at up
to 5 speed, DVD+R at up to 8 speed, DVD-RW at up
to 8 speed, DVD+R DL at up to 6 speed and DVD_R
DL at up to 6 speed. This drive supports the following
formats:
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
DVD-ROM
DVD-Video
DVD-R
DVD-RW
DVD+R
DVD+RW
DVD-RAM
DVD+R DL
DVD-R DL
CD-DA
CD-Text
CD-R
CD-RW
CD-ROM Mode 1, Mode 2
CD-ROMXA Mode 2 (Form 1, Form 2)
CD-G (Audio CD only)
Photo CD (single/multi-session)
Enhanced CD (CD-EXTRA)
Addressing Method 2
2.6 GB and 5.2 GB DVD-RAM media cannot be read from or write to.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-5
Introduction
Display
The computer’s LCD panel supports high-resolution video graphics.
The screen can be set at a wide range of viewing angles for
maximum comfort and readability.
Display panel
13.3” WXGA CSV with 1280 horizontal × 800
vertical pixels.
Graphics Controller
Graphics controller maximizes display
performance. Refer to Appendix B, Display
Controller for more information.
Keyboard
Built-In
TOSHIBA Vista keyboard, 86 keys or 87 keys,
compatible with IBM enhanced keyboard,
embedded numeric overlay, dedicated cursor
control,
and
keys. Refer to Chapter 5, The
Keyboard, for details.
Pointing Device
Built-In TouchPad
A TouchPad and control buttons in the palm
rest enable control of the on-screen pointer and
scrolling of windows.
Ports
HDMI
This HDMI jack allows you to connect external
display/audio devices. (Provided with some
models)
External Monitor
This 15-pin port lets you connect an external
video display.
Universal Serial
Bus (USB 2.0)
The computer has Universal Serial Bus ports that
comply with the USB 2.0 standard, which enables
data transfer speeds 40 times faster than the USB
1.1 standard. (The ports also support USB 1.1.)
eSATA/USB combo One eSATA/Universal Serial Bus (USB) combo
port
enables a chain connection of USB-equipped or
eSATA-equipped devices to your computer through
the port.
1-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Slots
ExpressCard Slot
The ExpressCard slot that can accommodate two
standard module formats; an ExpressCard/34
module and an ExpressCard/54 module. An
ExpressCard module is a small add-in card
technology based on the PCI Express and
Universal Serial Bus (USB) interfaces.
Bridge Media Card
Slot
Supports SD/miniSD/microSD/SDHC memory
card, MMC, MEMORY STICK, MEMORY STICK
PRO, MEMORY STICK PRO DUO and xD Picture
card.
Multimedia
Web Camera
Record/Send still or video images with this
integrated webcam. (provided with some models)
Sound System
A Windows® Sound System that provides
speakers as well as jacks for an external
microphone and headphones.
Special harman/kardon sound system (depending
on the model you purchased).
Headphone (S/P
DIF) jack
This jack outputs analog audio signals. This jack
can be used also as S/P DIF jack and enables
connection of optical digital correspondence
apparatus.
Microphone Jack
SIM Card Slot
A 3.5 mm mini microphone jack enables
connection of a three-conductor mini jack for
monaural microphone input.
This slot (located underneath the battery pack)
allows you to transfer information from a standard
25mm Subscriber identity Module (SIM) card to
your computer. The SIM card slot is only featured
on some models.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-7
Introduction
Communications
Modem
Provides capability for data and fax
communication. It supports V.90 (V.92). The speed
of data transfer and fax communication depends
on the analog telephone line conditions. The
computer has a modem jack for connection to a
telephone line. Both V.90 and V.92 are supported
only in the USA, Canada, France and Germany.
V.90 is available in other regions.
Some models are equipped with the integrated
modem.
LAN
The computer has built-in support for Ethernet
LAN (10 megabits per second, 10BASE-T),
Fast Ethernet LAN (100 megabits per second,
100BASE-TX) and Gigabit Ethernet LAN (1000
megabits per second, 1000BASE-T).
It is pre-installed as a standard device in some
markets.
Wireless LAN
Some computers in this series are equipped with
a Wireless LAN module that is compatible with
other LAN systems based on Direct Sequence
Spread Spectrum/Orthogonal Frequency Division
Multiplexing radio technology that complies with
the IEEE 802.11 standard.
The transmission speed over the wireless LAN, and the distance over
which the wireless LAN can reach, may vary depending on surrounding
electromagnetic environment, obstacles, access point design and
configuration, client design and software/hardware configurations. The
transmission rate described is the theoretical maximum speed as specified
under the appropriate - the actual transmission speed will be lower than the
theoretical maximum speed.
Bluetooth
Some computers in this series are equipped
with Bluetooth functions. Bluetooth wireless
technology eliminates the need for cables
between electronic devices such as computers
and printers. Bluetooth provides fast, reliable,
and secure wireless communication in a small
space. (Provided with some models)
Wireless
Communication
Switch
This switch turns the Wireless LAN and
Bluetooth function on and off.
1-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Security
Security lock slot
Connects an optional security lock to anchor the
computer to a desk or other large object.
Password
n
n
n
n
Power-on password protection
Two level password architecture
HDD password protection
Fingerprint authentication (not available on
all models)
Special features
The following features are either unique to TOSHIBA computers or are advanced
features, which make the computer more convenient to use.
Hot Keys
Key combinations let you quickly modify the
system configuration directly from the keyboard
without running a system configuration program.
Keypad Overlay
A ten-key pad is integrated into the keyboard.
keypad overlay.
Instant Security
The hot key function Fn + F1 blanks the screen
and disables the computer, providing data
security.
Display Automatic
Power Off *1
This feature automatically cuts off power to the
internal display when there is no keyboard input
for a specified time. Power is restored when any
key is pressed.
This can be specified in the Power Options.
HDD Automatic
Power Off *1
This feature automatically cuts off power to the
hard disc drive when it is not accessed for a
specified time. Power is restored when the hard
disc is accessed.
This can be specified in the Power Options.
System Automatic
Sleep Mode/
This feature automatically shuts down the system
into Sleep Mode or Hibernation Mode when there
is no input or hardware access for a specified
time.
Hibernation*1
This can be specified in the Power Options.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-9
Introduction
Intelligent Power
Supply *1
A microprocessor in the computer’s intelligent
power supply detects the battery’s charge and
calculates the remaining battery capacity. It also
protects electronic components from abnormal
conditions, such as voltage overload from an AC
adaptor.
This can be specified in the Power Options.
This feature lets you save battery power.
This can be specified in the Power Options.
Battery Save Mode *1
Panel Power On/
Off*1
This feature turns power to the computer off
when the display panel is closed and turns it
back on when the panel is opened.
This can be specified in the Power Options.
Low Battery
Automatic
Hibernation*1
When battery power is exhausted to the point
that computer operation cannot be continued,
the system automatically enters Hibernation
Mode and shuts down.
This can be specified in the Power Options.
TOSHIBA HDD
Protection
This feature uses the acceleration sensor built
in the computer to detect vibration and shocks,
and automatically moves the hard disk drive’s
read/write head to a safe position in order to
reduce the risk of damage that could be caused
by head-to-disk contact. Refer to the Using the
Hard Disk Drive (HDD) Protection section in
n
n
The TOSHIBA HDD Protection function does not guarantee that the hard
disk drive will not be damaged.
TOSHIBA HDD Protection cannot be used in models that are equipped
with SSD.
1-10
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Hibernation
Sleep Mode
This feature allows you to turn off the power
without exiting from your software. The contents
of main memory are saved to the hard disk,
when you turn on the power again, you can
continue working right where you left off. Refer
If you have to interrupt your work, you can turn
off the power without exiting from your software.
Data is maintained in the computer’s main
memory. When you turn on the power again, you
can continue working right where you left off.
*1 Click
Options.
, Control Panel, System and Maintenance, and then click Power
USB Sleep and
Charge function
This feature allows you to charge USB-
compatible external devices such as mobile
phones or portable digital music players via the
USB port when your computer is in Sleep Mode,
Hibernation Mode, or in the shutdown state.
This function is worked by the USB Sleep and
Charge Utility. For more information, please refer
USB Wakeup
function
This function restores the computer from Sleep
Mode depending on the external devices
connected to the USB ports.
For example, if a mouse or USB keyboard is
connected to a USB port, moving the mouse/
keyboard will wake up the computer.
The “USB Wakeup function” operates under
Windows® Vista operating system and it works
for all USB ports.
TOSHIBA PC Health
Monitor
The TOSHIBA PC Health Monitor software
program monitors computer system functions
such as power consumption, the cooling system
and HDD/SSD Alert. It alerts users of specific
system conditions via pop-up messages. It
also tracks the usage of the computer and
related devices, logging the service relevant
informationon the computer’s hard disk drive.
Refer to Appendix E, TOSHIBA PC Health
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-11
Introduction
TOSHIBA Value Added Package
This section describes the TOSHIBA Component features pre-installed on the
computer.
TOSHIBA Power
Saver
TOSHIBA Power Saver provides you with
the features of more various power supply
managements.
TOSHIBA Zooming
Utility
This utility allows you to enlarge or reduce
the icon size on the Windows Desktop, or the
zoom factor associated with specific supported
applications.
TOSHIBA PC
Diagnostic Tool
The TOSHIBA PC Diagnostic Tool will display
basic system configuration information and allow
the functionality of some of the computer’s built-
in hardware devices to be tested.
TOSHIBA Flash
Cards
This utility supports the following functions.
n
n
Hot key function
TOSHIBA utility launcher function
TOSHIBA
Components
Common Driver
TOSHIBA Components Common Driver
contains the module required for the utility which
TOSHIBA offers.
TOSHIBA
Accessibility
The TOSHIBA Accessibility utility provides
support to movement impaired users when they
need to use the TOSHIBA Hot-key functions. In
use, the utility allows you to make the Fn key
‘sticky’, that is you can press it once, release
it, and then press one of the ‘F’ keys in order
to access its specific function. When set, the
Fn key will remain active until another key is
pressed.
TOSHIBA Button
Support
The computer includes the following buttons:
n
n
CD/DVD button
Mute button
The starting application from the button can be
changed.
1-12
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Utilities and Applications
This section describes pre-installed utilities and tells how to start them. For details
on operations, refer to each utility’s online manual, help files or readme.txt files.
TOSHIBA Assist
HW Setup
TOSHIBA Assist is a graphical user interface that
provides easy access to help and services.
This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To start
the utility, double click the TOSHIBA Assist on
your desktop, select OPTIMIZE tab, and click
TOSHIBA Hardware Settings.
Power On Password
Two levels of password security, supervisor
and user, are available to prevent unauthorized
access to your computer.
To register a supervisor password, double click
the TOSHIBA Assist on your desktop select
the SECURE tab and start the Supervisor
password utility.
To set a user password, select the SECURE
tab on TOSHIBA Assist, then start the User
password utility. On the Password tab you can
register a user password.
Corel DVD
MovieFactory for
TOSHIBA
You can edit digital video and make a DVD-
Video and support Labelflash™ function.
TOSHIBA DVD
PLAYER
The DVD PLAYER is used to play DVD Video. It
has an on-screen interface and function.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-13
Introduction
Fingerprint Utility
This product has a fingerprint utility installed
for the purpose of enrolling and recognizing
fingerprints which can then be linked to a
username and password in order to remove the
need to input these details from the keyboard.
Just by swiping an enrolled finger against the
fingerprint sensor, the following functions will be
enabled:
n
n
n
n
Logon to Windows and access a security
enabled homepage through Internet
Explorer.
Files and folders can be encrypted
decrypted and third party access to them is
prevented.
Disable the password-protected screen-
saver when returning from a power-saving
mode such as Sleep Mode.
Authentication of the User Password (and,
if applicable, the HDD(Hard Disk Drive)
Password) when booting up the computer
(Power-on Security).
n
Single Sign-on feature
n
Fingerprint security cannot be used in models that do not have a
fingerprint module installed.
n
The HDD (Hard Disk Drive) Password can be registered in the BIOS
Setup. If you forget your HDD Password, TOSHIBA will NOT be able
to assist you, and your HDD will be rendered COMPLETELY and
PERMANENTLY INOPERABLE. TOSHIBA will NOT be held responsible
for any loss of any data, any loss of use or access to your HDD, or for
any other losses to you or any other person or organization that result
from the loss of access to your HDD. If you can’t accept this risk, don’t
register the HDD Password.
TOSHIBA Face
Recognition
TOSHIBA Face Recognition uses a face
verification library to verify the face data of users
when they log in to Windows. If the verification is
successful, the user will be logged into Windows
automatically. The user can thus avoid having to
enter a password or the like, which makes the
login process easier.
1-14
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Bluetooth Stack
for Windows® by
Toshiba
This software enables communication between
the computer and external Bluetooth devices
such as printers and mobile phones.
Bluetooth functions cannot be used in models that do not have a Bluetooth
module installed.
TOSHIBA SD
Memory Card
Format
This utility allows you to format an SD/SDHC
memory card by the SD standard format.
n
n
SD Memory Card Format Utility and other SD functions are packaged into
TOSHIBA SD Memory Utilities.
Only the SD Memory Boot Utility can create a bootable SD memory card.
TOSHIBA DVD-RAM
Utility
TOSHIBA DVD-RAM Utility has a Physical
Format function and Write-Protect function to
DVD-RAM.
This utility is contained in the TOSHIBA Disc
Creator setup module.
To run TOSHIBA DVD-RAM Utility, click
then select All Programs, TOSHIBA, CD&DVD
Applications, and then click DVD-RAM Utility.
TOSHIBA Disc
Creator
You can create CD/DVDs in several formats
including audio CDs that can be played on a
standard stereo CD player and data CDs or
DVDs to store multimedia and/or document files
on your hard disk drive. This software can be
used on a model with the CD-RW/DVD-ROM
drive, DVD-R/-RW drive, DVD+R/+RW drive and
DVD Super Multi Double Layer drive.
To run TOSHIBA Disc Creator, click
then
select All Programs, TOSHIBA, CD&DVD
Applications, and then click Disc Creator.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-15
Introduction
TOSHIBA ConfigFree
ConfigFree is a suite of utilities to allow easy
control of communication device and network
connections. ConfigFree also allows you to
find communication problems and create
profiles for easy switching between location and
communication networks.
To run ConfigFree, click
, select All
Programs, TOSHIBA, Networking and then
click ConfigFree.
Windows Mobility
Center
This section describes the Windows Mobility
Center. Mobility Center is a utility for accessing
several mobile PC settings quickly in one
window. A maximum of eight tiles are prepared
as the operating system default. Two additional
tiles are also added to your Mobility Center.
Installing the “TOSHIBA Extended Tiles for
Windows Mobility Center” package will add the
following functions.
n
Lock Computer: Lock your computer
without turning it off. This has the same
function as the Lock button at the bottom of
the right pane of the start menu.
n
TOSHIBA Assist: Open the TOSHIBA
Assist if it is already installed in your
computer.
TOSHIBA USB Sleep
and Charge Utility
This utility is able to either enable or disable the
USB Sleep and Charge function.
This utility shows the positions of USB ports that
support the USB Sleep and Charge function and
displays the battery’s remaining capacity.
To start this utility, click Start
TOSHIBA Utilities
Charge.
All Programs
USB Sleep and
TOSHIBA HDD/SSD
Alert
The TOSHIBA HDD/SSD Alert includes wizard
functions to monitor the Disk Drive operating
status and execute the system backup.
1-16
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Options
You can add a number of options to make your computer even more powerful and
options are available:
Memory expansion
A 1GB, 2GB, or 4GB memory module can be
installed in the memory slot for a maximum of
8GB system memory.
Use only PC6400* compatible DDRII memory modules. See your TOSHIBA
dealer for details.
* The availability of DDRII depends on the model you purchased.
Battery pack
AC Adaptor
An additional battery pack can be purchased
from your TOSHIBA dealer. Use it as a spare to
increase your computer operating time.
If you use your computer at more than one site
frequently, it may be convenient to purchase an
additional AC adaptor for each site so you will
not have to carry the adaptor with you.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-17
Introduction
1-18
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 2
The Grand Tour
This chapter identifies the various components of your computer. Become familiar
with each component before you operate the computer.
Front with the display closed
The following figure shows the computer’s front with its display panel in the closed
position.
3
4
1
2
5
6
7
Front of the computer with display closed
1.
2.
3.
4.
Multiple Digital Media Card Slot
Wireless Communication Switch
DC IN LED
5.
6.
7.
Battery LED
Bridge Media Slot LED
HDD/ODD/eSATA LED
Power LED
Multiple Digital Media Card Slot
1
Supports SD/SDHC memory card, MMC, MEMORY STICK,
MEMORY STICK PRO and xD Picture card
User’s Manual
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Communication Switch
2
Slide this switch to the right of the computer to turn on the
wireless communication. Slide it to the left to turn off the
functions.
n
Turn Wi-Fi and Bluetooth functionalities off when near a person who
may have a cardiac pacemaker implant or other medical electric device.
Radio waves may affect pacemaker or medical device operation, possibly
resulting in serious injury. Follow the instruction of your medical device
when using any Wi-Fi or Bluetooth functionality.
n
n
Always turn off Wi-Fi or Bluetooth functionality if the computer is near
automatic control equipment or appliances such as automatic doors or
fire detectors. Radio waves can cause malfunction of such equipment,
possibly resulting in serious injury.
Do not use the Wi-Fi or Bluetooth functionalities near a microwave oven
or in areas subject to radio interference or magnetic fields. Interference
from a microwave oven or other source can disrupt Wi-Fi or Bluetooth
operation.
DC IN LED
3
The DC IN LED indicates the computer is connected to the AC
adaptor and it is plugged into an AC power source.
Power LED
4
The Power indicator glows white when the computer is on. If you
select Sleep Mode from Turn Off Computer, this indicator flashes
orange (one second on, two seconds off) while the computer
enters Sleep Mode.
Battery LED
5
The Battery indicator shows the condition of the battery’s charge:
White indicates a full charge, orange indicates that the battery
is charging and flashing orange indicates a low battery charge.
Bridge Media Slot LED
6
7
Multiple Digital Media Card Slot LED lights up when the Multiple
Digital Media Card Slot is accessed.
(Provided with some models)
HDD/ODD/eSATA LED
The HDD/ODD/eSATA indicator glows while the computer
is accessing a hard disk drive, optical disk drive, or eSATA-
equipped device.
2-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Left side
The following figure shows the computer’s left side.
2
3
1
4
5
6
7
8
The left side of the computer
1.
2.
3.
4.
External Monitor Port*
Cooling Vents
5.
6.
7.
8.
ExpressCard Slot
Headphone (S/P DIF) Jack
Microphone Jack
HDMI*
eSATA and USB Combo Port
Universal Serial Bus (USB 2.0) port
* Provided with some models.
External Monitor Port
1
This 15-pin port lets you connect an external video display.
(Provided with some models.)
Cooling Vents
2
Cooling vents help prevent the CPU from overheating.
Do not block the cooling vents. Keep foreign metal objects, such as screws,
staples and paper clips, out of the cooling vents. Foreign metal objects can
create a short circuit, which can cause damage and fire, possibly resulting in
serious injury.
HDMI
3
A jack enables connection of the application of High Definition
Multimedia Interface, such as DVD Player, LCD Monitor, LCD TV,
HDTV, Settop- Box and projector.
(Provided with some models)
eSATA and USB Combo Port
4
One eSATA/Universal Serial Bus (USB) combo port complies with
USB 2.0 standards, which enables data transfer speeds 40 times
faster than the USB 1.1 standards.
This combo port also enables a chain connection of USB-
equipped or eSATA-equipped devices to your computer through
the port
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3
ExpressCard Slot
5
This slot allows you to insert an ExpressCard. An ExpressCard is a
small, modular add-in card technology based on PCI Express and the
Universal Serial Bus (USB) interface. The max. transmission rate is
2.5Gbps. ExpressCard/34 and ExpressCard/54 types are supported.
Keep foreign metal objects, such as screws, staples and paper clips, out of the
ExpressCard slot. Foreign metal objects can create a short circuit, which can
cause damage and fire, possibly resulting in serious injury.
Headphone (S/PDIF) Jack
6
This jack outputs analog audio signals. This jack can be used also as
S/P DIF jack and enables connection of optical digital correspondence
apparatus.
Microphone Jack
7
8
A 3.5 mm mini microphone jack enables connection of a three-
conductor mini jack for monaural microphone input.
Universal Serial Bus (USB 2.0) port
One Universal Serial Bus (USB) port complies with USB 2.0
standards, which enables data transfer speeds 40 times faster than
the USB 1.1 standards.
2-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Right side
The following figure shows the computer’s right side.
4
3
2
1
5
6
7
8
9
10
The right side of the computer
1.
2.
3.
4.
5.
ODD Indicator
6.
7.
8.
9.
10
LAN Jack
Emergency Eject Hole
Eject Button
Modem Jack*
DC IN Jack
Optical Disk Drive
Security Lock
Slot-Loading ODD*
Universal Serial Bus (USB 2.0)
ports
* Provided with some models.
ODD Indicator
1
2
The ODD indicator glows amber when the computer accesses the
optical disc drive.
Emergency Eject Hole
In the event that the disc drive becomes inexplicably locked or
stops responding press this button to force a manual ejection of the
ODD tray.
Eject Button
3
4
Press this button to open the ODD tray.
Optical Disc Drive (ODD)
The computer is configured with a DVD Super Multi (+R DL). Some
models are equipped with an optical disc drive.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-5
Universal Serial Bus (USB 2.0) port
5
6
Two Universal Serial Bus (USB) port comply with USB 2.0
standards, which enables data transfer speeds 40 times faster than
the USB 1.1 standards.
LAN Jack
This jack lets you connect to a LAN. The adaptor has built-in
support for Ethernet LAN (10 megabits per second, 10BASE-T),
Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and
Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).
for details.
n
n
Do not connect any cable other than a LAN cable to the LAN jack. It could
cause damage or malfunction.
Do not connect the LAN cable to a power supply. It could cause damage
or malfunction.
Modem Jack
7
The modem jack allows you to use a modular cable to connect the
modem directly to a telephone line. (Depends on the model you
purchased.)
n
Connection to any communication line other than an analog
phone could cause a computer system failure.
n
Connect the built-in modem only to ordinary analog
phone lines.
n
n
Never connect the built-in modem to a digital line (ISDN).
Never ever connect the built-in modem to the digital
connector on a public telephone or to a digital private
branch exchange (PBX).
n
Never connect the built-in modem to a key telephone
system for residences or offices.
n
Avoid using your computer modem with the telephone
cable connected during an electrical storm. There may be a
remote risk of electric shock from lightning.
(Provided with some models.)
2-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
DC IN Jack
8
9
The AC adaptor connects to this socket. Use only the model
of AC adaptor that comes with the computer. Using the wrong
adaptor can damage your computer.
Security Lock
A security cable attaches to this port. The optional security cable
anchors your computer to a desk or other large object to deter
theft.
Slot-Loading ODD
10
Insert your CD/DVD into this slot.
(Provided with some models)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-7
Underside
The following figure shows the underside of the computer. Make sure the display
is closed before turning over your computer.
1
2
4
5
6
7
3
The underside of the computer
1.
2.
3.
4.
Wireless LAN Module cover
Cooling Vents
5.
6.
7.
Battery Pack Lock
Battery Pack
Battery Release Latch
HDD/Memory Module cover
SIM card slot* (Under the battery pack)
Wireless LAN Module Cover
1
2
3
This cover protects the Wireless LAN module.
Cooling Vents
Cooling vents help prevent the CPU from overheating.
Battery Release Latch
Slide and hold this latch to release the battery pack for removal.
For detailed information on removing the battery pack, refer to
Hard Disk and Memory Module Cover
4
This cover protects the hard disk and the memory module. Refer
2-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Pack Lock
5
6
Slide this lock to prepare the battery pack for removal.
Battery Pack
The battery pack powers the computer when the AC adaptor is
not connected. For detailed information on the battery pack, refer
SIM card slot
7
Located under the battery pack, the SIM card slot allows you
install a standard 25mm Subscriber Identity Module (SIM) into
your computer.
(Provided with some models)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-9
Front with the display open
This section shows the front of the computer with the display open. Refer to the
appropriate illustration for details. To open the display, lift the front of the display.
Position the display at a comfortable viewing angle.
9
7
8
10
11
14
15
16
13
12
17
18
6
5
5
4
3
2
1
The front of the computer with the display open
1.
TouchPad Control Buttons
Fingerprint Sensor*
TouchPad
10.
11.
12.
13.
14.
15.
16.
17.
18.
Built-in Microphone*
Display Screen
ECO Button
2.
3.
4.
5.
6.
7.
8.
9.
TouchPad On/Off button
Speakers
CD/DVD Button
Play/Pause Button
Previous Button
Next Button
Power Button
Web Camera*
Web Camera LED*
Wireless Antenna* (not shown)
Mute Button
Volume Button
* Provided with some models.
Please handle your computer carefully to avoid scratching or damaging the
surface.
2-10
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TouchPad Control Buttons
1
2
These let you select menu items or manipulate text and graphics
designated by the on-screen pointer. Refer to the Using the
Fingerprint Sensor
Just by swiping the finger against the fingerprint sensor, the
following functions will be enabled: Log-on to Windows and
access a security-enabled homepage through IE (Internet
Explorer) Files and folders can be encrypted/decrypted and third
party access to them prevented. Disable the password-protected
screensaver when returning from power-saving (Sleep) mode.
System boot authentication and Single Touch Boot feature.
Authentication of the User Password and Hard Disk Drive
Password when booting up the computer. Refer to the Using the
(Provided with some models)
TouchPad
3
A TouchPad located in the centre of the palm rest is used to
control the on-screen pointer.
TouchPad On/Off button
4
5
Turns the TouchPad ON/OFF.
Speakers
The speakers emit sound generated by your software as well as
audio alarms, such as low battery condition, generated by the
system.
Power Button
6
7
Turns the computer on and off and puts it into Hibernation mode
and wakes it up from Sleep mode.
Web Camera
Takes your picture or sends your image to web contacts.
(Provided with some models)
Web Camera LED
8
Web Camera LED indicates web camera is working or not.
(Provided with some models)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-11
Wireless Antenna (WLAN, 3G)
9
Some computers in this series are equipped with a WLAN or 3G
antenna.
(Provided with some models)
Built-in microphone
10
The Microphone is used with the Web Camera to talk to other
Web Camera users and to record messages on windows media.
(Provided with some models)
Display Screen
11
The LCD displays high-contrast text and graphics. Refer to
on the AC adaptor the display screen’s image will be somewhat
brighter than when it operates on battery power. The lower
brightness level is intended to save battery power.
ECO Button
12
13
Press this button to change the TOSHIBA ECO utility. This button
changes “On” and “Off” of ECO Mode. When ECO Mode is “On”,
the icon turns green. When ECO Mode is “Off”, the icon turns
gray.
CD/ DVD Button
Pressing this button will launch an application program that
allows for playing of CDs or DVDs.
The application that is launched differs by model: Windows Media
Player/TOSHIBA DVD PLAYER.
(Provided with some models)
Play/Pause Button
14
15
16
Press this button to begin playing an audio CD, a DVD movie or
digital audio file. This button also acts as a Pause button.
(Provided with some models)
Previous Button
Skips backwards to the previous track, chapter or digital file.
(Provided with some models)
Next Button
Skips forward to the next track, chapter or digital file. Refer to
(Provided with some models)
2-12
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute Button
17
18
Press this button to Mute volume.
(Provided with some models)
Volume Button
Press (+} to increase or (-) to decrease the volume.
Optical Disc Drive
An ATAPI interface controller is used for optical disc operation. When the
computer is accessing an optical disc, an indicator on the drive glows.
Region codes for DVD drive and media
Optical disc drive and their associated media are manufactured according to the
specifications of six marketing regions. When you purchase DVDVideo, make sure
it matches your drive, otherwise it will not play properly.
Code
Region
1
2
3
4
Canada, United States
Japan, Europe, South Africa, Middle East
Southeast Asia, East Asia
Australia, New Zealand, Pacific Islands, Central
America, South America, Caribbean
5
6
Russia, Indian Subcontinent, Africa, North Korea,
Mongolia
China
Writable discs
This section describes the types of writable CD discs. Check the specifications of
CDs
n
CD-R discs can be written only once. The recorded data cannot be erased or
changed.
n
CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi
speed CD-RW discs or high-speed 4- to 10-speed discs. The write speed of
the ultra-speed CD-RW discs is a maximum of 24-speed.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-13
DVD Super Multi Double Layer drive
The full-size DVD Super Multi (+-R DL) drive module lets you record data to
rewritable CD/DVDs as well as run either 12 cm (4.72”) or 8cm (3.15”) CD/DVDs
at Tray ODD and 12 cm (4.72”) CD/DVDs at slot ODD without using an adaptor.
The read speed is slower at the center of a disc and faster at the outer edge.
DVD read
8 speed (maximum)
DVD-R write
DVD-R DL write
DVD-RW write
DVD+R write
DVD+R DL write
DVD+RW write
DVD-RAM write
CD read
8 speed (maximum)
4 speed (maximum)
6 speed (maximum)
8 speed (maximum)
4 speed (maximum)
8 speed (maximum)
5 speed (maximum)
24 speed (maximum)
24 speed (maximum)
16 speed (maximum, high-speed media)
CD-R write
CD-RW write
Use only round standard (12 cm) discs with this slot-loading optical drive. Any
other size or shape disc may not be able to be removed from the slot and may
damage the system as well as the disc.
AC adaptor
The AC adaptor converts AC power to DC power and reduces the voltage supplied
to the computer. It can automatically adjust to any voltage from 100 to 240 volts
and to a frequency of either 50 or 60 hertz, enabling you to use the computer in
almost any country/region.
To recharge the battery, simply connect the AC adaptor to a power source and the
2-14
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The AC adaptor
n
Use Depending on the model in question, either a 2-pin or 3-pin adaptor/
power lead will be bundled with the computer.
n
n
Do not use a 3-pin to 2-pin conversion plug.
The supplied power cord conforms to safety rules and regulations in the
region the product is bought and should not be used outside of this region.
In order to use the adaptor/computer in other regions, you should please
buy a power cord that conforms to the safety rules and regulations in that
particular region.
Always use the TOSHIBA AC adaptor that was included with your computer,
or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other
damage to the computer. Use of an incompatible AC adaptor could cause
fire or damage to the computer possibly resulting in serious injury. TOSHIBA
assumes no liability for any damage caused by use of an incompatible
adaptor.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-15
2-16
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 3
Getting Started
This chapter provides basic information to get you started using your computer. It
covers the following topics:
n
n
All users should be sure to read the section Starting up for the first time.
Be sure to read the enclosed Instruction Manual for Safety and Comfort
for information on the safe and proper use of this computer. It is intended
to help you be more comfortable and productive while using a notebook
computer. By following the recommendations in it you may reduce your
chance of developing a painful or disabling injury to your hand, arms,
shoulders or neck.
n
n
n
n
n
n
n
n
n
n
Connecting the AC adaptor
Opening the display
Turning on the power
Windows Vista™ setup
Turning off the power
Restarting the computer
System Recovery Options
Create Optical Recovery Discs
Restoring the preinstalled Software from the Recovery HDD
Restoring the Preinstalled Software from Recovery Media
n
Use a virus-check program and make sure it is updated regularly.
n
Never format storage media without checking its content - formatting
destroys all stored data.
n
It is a good idea to periodically back up the internal hard disk drive or
other main storage device to external media. General storage media is not
durable or stable over long periods of time and under certain conditions
may result in data loss.
n
Before you install a device or application, save any data in memory to the
hard disk drive or other storage media. Failure to do so may result in the
loss of data.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-1
Getting Started
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because the
battery pack will need to be charged before you can operate from battery power.
The AC adaptor can be connected to any power source supplying from 100 to 240
volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery
n
Always use the TOSHIBA AC adaptor that was included with your
computer or use AC adaptors specified by TOSHIBA to avoid any risk of
fire or other damage to the computer. Use of an incompatible AC adaptor
could cause fire or damage to the computer possibly resulting in serious
injury. TOSHIBA assumes no liability for any damage caused by use of an
incompatible adaptor.
n
n
n
Never plug the AC adaptor into a power source that does not correspond
to both the voltage and the frequency specified on the regulatory label of
the unit. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury.
Always use or purchase power cables that comply with the legal voltage
and frequency specifications and requirements in the country of use.
Failure to do so could result in a fire or electric shock, possibly resulting in
serious injury.
The supplied power cord conforms to safety rules and regulations in the
region the product is bought and should not be used outside this region.
For use in other regions, please buy power cords that conform to safety
rules and regulations in the particular region.
n
n
Do not use a 3-pin to 2-pin conversion plug.
When you connect the AC adaptor to the computer, always follow the
steps in the exact order as described in the User’s Manual. Connecting
the power cable to a live electrical outlet should be the last step otherwise
the adaptor DC output plug could hold an electrical charge and cause an
electrical shock or minor bodily injury when touched. As a general safety
precaution, avoid touching any metal parts.
n
n
Never place your computer or AC adaptor on a wooden surface, furniture,
or any other surface that could be marred by exposure to heat since the
computer base and AC adaptor’s surface increase in temperature during
normal use.
Always place your computer or AC adaptor on a flat and hard surface that
is resistant to heat damage.Refer to the enclosed Instruction Manual for
Safety and Comfort for detailed precautions and handling instructions.
3-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
1
Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor
Enter a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the
right side of the computer.
Connecting the adaptor to the
3. Plug the power cord into a live wall outlet.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3
Getting Started
Opening the display
The display panel can be rotated in a wide range of angles for optimal viewing.
Lift the panel up and adjust it to the best viewing angle for you.
Use reasonable care when opening and closing the display panel. Opening it
vigorously or slamming it shut could damage the computer.
Opening the display
n
n
When opening the panel, please be careful not to force it beyond the
point where it moves easily.
Be careful not to open the display panel too far as this could put stress on
the display panel’s hinges and cause damage.
n
n
n
Do not press or push on the display panel.
Do not lift the computer by the display panel.
Do not close the display panel with pens or any other objects left in
between the display panel and the keyboard.
n
When opening or closing the display panel, place one hand on the palm
rest to hold the computer in place and use the other hand to slowly open
or close the display panel (Do not use excessive force when opening or
closing the display panel).
3-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you have set
Press and hold the computer’s power button for two or three seconds.
Turning on the power
Windows Vista™ setup
When you first turn on the power, the computer’s initial screen is the Microsoft®
Windows Vista™ Startup Screen Logo.
Follow the on-screen directions.
Be sure to read the Windows End User License Agreement display
carefully.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-5
Getting Started
Turning off the power
The power can be turned off in one of the following modes: Shut down (Boot),
Hibernation or Sleep Mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode no data is saved and the
computer will boot to the operating system’s main screen.
1. If you have entered data, save it to the hard disk.
2. Make sure all disk (disc) activity has stopped, then remove the CD/DVDs.
Make sure the Disk LED indicator is off. If you turn off the power while a disk
(disc) is being accessed, you can lose data or damage the disk (disc).
3. Click
button
then click the arrow icon
located in the power management
. From the pull down menu, choose Shut Down.
4. Turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment to
let all capacitors fully discharge.
Sleep Mode
If you have to interrupt your work, you can turn off the power without exiting from
your software. Data is maintained in the computer’s main memory. When you turn
on the power again, you can continue working right where you left off.
When you have to turn off your computer aboard an aircraft or in places where
electronic devices are regulated or controlled, always completely shut down
the computer. This includes turning off any wireless communication switches
or devices, and canceling settings that reactivate the computer automatically,
such as a timer recording function. Failure to completely shut down the
computer in this way could allow the operating system to reactivate and run
pre-programmed tasks or preserve unsaved data, which could interfere with
aviation or other systems, possibly causing serious injury.
3-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
n
n
When the AC adaptor is connected, the computer will go into Sleep Mode
according to the settings in the Power Options.
To restore operation from Sleep Mode, press the power button or press
any key. The latter action works only if Wake-up on Keyboard is enabled
in HW Setup.
n
n
If the computer automatically enters Sleep Mode while a network
application is active, the application might not be restored when the
computer wakes up from Sleep Mode.
To prevent the computer from automatically entering Sleep Mode, disable
Sleep Mode in the Power Options. That action, however, will nullify the
computer’s Energy Star compliance.
n
n
Before entering Sleep Mode, be sure to save your data.
Do not install or remove a memory module while the computer is in Sleep
Mode. The computer or the module could be damaged.
n
Do not remove the battery pack while the computer is in Sleep Mode
(unless the computer is connected to an AC power source). Data in
memory will be lost.
Benefits of Sleep Mode
The Sleep Mode feature provides the following benefits:
n
n
Restores the previous working environment more rapidly than does
Hibernation Mode.
Saves power by shutting down the system when the computer receives no
input or hardware access for the duration set by the System Sleep Mode
feature.
n
You can use the panel power off feature.
Entering Sleep Mode
You can enter Sleep Mode in one of three ways:
n
Click Start then click the power button (
management buttons ( ).
Please note that this feature must be enabled within the Power Options
) located in the power
(to access it, click
Control Panel
System and Maintenance
Power Options).
n
Click
, click power button
located in the power management
and select Sleep from the
buttons
menu.
, or click arrow button
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-7
Getting Started
n
Close the display panel. This feature must be enabled. Please refer to
the Power Options (to access it, click Control Panel System
and Maintenance Power Options).
When you turn the power back on, you can continue where you left when you shut
down the computer.
You can also enable Sleep Mode by pressing Fn + F3. Refer to Chapter 5,
The Keyboard, for details.
n
n
When the computer is shut down in Sleep Mode, the power indicator
flashes orange.
If you are operating the computer on battery power, you can lengthen
the operating time by turning it off into Hibernation Mode, as Sleep Mode
consumes more power.
Sleep Mode limitations
Sleep Mode will not function under the following conditions:
n
n
Power is turned back on immediately after shutting down.
Memory circuits are exposed to static electricity or electrical noise.
Hibernation Mode
The hibernation feature saves the contents of memory to the hard disk when the
computer is turned off. The next time the computer is turned on, the previous state
is restored. The hibernation feature does not save the status of peripheral devices.
n
Save your data. While entering Hibernation Mode, the computer saves
the contents of memory to the HDD. However, for safety sake, it is best to
save your data manually.
n
n
Data will be lost if you remove the battery or disconnect the AC adaptor
before the save is completed. Wait for the disk indicator to go out.
Do not install or remove a memory module while the computer is in
Hibernation Mode. Data will be lost.
3-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Benefits of Hibernation Mode
The Hibernation Mode feature provides the following benefits:
n
n
n
Saves data to the hard disk when the computer automatically shuts down
because of a low battery.
You can return to your previous working environment immediately when
you turn on the computer.
Saves power by shutting down the system when the computer receives
no input or hardware access for the duration set by the System hibernate
feature.
n
You can use the panel power off feature.
Starting Hibernation Mode
You can also enable Hibernation Mode by pressing Fn + F4. Refer to Chapter
To enter Hibernation Mode, follow the steps below.
1. Click
.
2. Click the arrow icon
.
located in the power management button
3. From the pull down menu, select Hibernate.
Automatic Hibernation Mode
The computer will enter Hibernation mode automatically when you press the
power button or close the Display Screen. First, however, make the appropriate
settings according to the steps below.
1. Open the Control Panel.
2. Open System and Maintenance and open Power Options.
3. Select the Choose what the power button does.
4. Enable the desired Hibernation settings for When I press the power button
and When I close the lid.
5. Click the Save changes button.
Data saving in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer takes a moment
to save current memory data to the hard disk. During this time, the disk indicator
will light.
After you turn off the computer and memory is saved to the hard disk, turn off the
power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment to
let all capacitors fully discharge.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-9
Getting Started
Restarting the computer
Certain conditions require that you reset the system. For example, if:
n
n
You change certain computer settings.
An error occurs and the computer does not respond to your keyboard
commands.
n
There are three ways to reset the computer system:
1. Click
button
then click the arrow icon
located in the power management
, and select Restart from pull down menu.
2. Press Ctrl + Alt + Del to display the menu window, then select Restart from
the Shut down options.
3. Press the power button and hold it down for five seconds. Once the
computer has turned itself off, wait between ten and fifteen seconds before
turning it on again with the power button.
System Recovery Options
About 1.5GB hidden partition is allocated on the hard drive for the System
Recovery Options.
The System Recovery Options feature will be unusable if this partition is
deleted.
System Recovery Options
The System Recovery Options feature is installed on the hard disk when shipped
from the factory. The System Recovery Options menu includes some tools to
repair startup problems, run diagnostics or restore the system.
You can see the more information about “Startup Repair” in “Windows Help and
Support” content.
The System Recovery Options can also be run manually to repair problems.
The procedure is as follows. Follow the instructions shown on the onscreen menu.
1. Turn off the computer.
2. While holding the F8 key, turn the computer on.
3. The Advanced Boot Options menu will be displayed.
Use the arrow keys to select Repair Your Computer and press Enter.
4. Follow the on-screen instructions.
The Windows Vista CompletePC Backup feature can be used on Windows
Vista™ Business Edition and Ultimate Edition.
3-10
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Create Optical Recovery Discs
A recovery image of your computer is stored on the hard disk. You may use this
image to create DVD recovery discs using the following steps:
1. Select DVD media.
2. The application will allow you to choose a type of media to create recovery
DVD including: DVD-R, DVD-RW, DVD+R and DVD+RW.
Some media may not be compatible with the Optical Drive of your computer.
Please verify your Optical Drive supports the blank media you choose.
3. Turn on your computer to open Windows Vista.
4. Insert the (first) blank media into the tray of the Optical Drive.
5. Double-click the Recovery Disc Creator icon on the Windows Vista desktop,
or select the application from Start menu.
6. After TOSHIBA Recovery Disc Creator starts, select the type of media and the
title you wish to copy to the media then click the Create button.
Restoring the preinstalled software from
the Recovery HDD
Part of the space on the hard disk drive is reserved as recovery partition for
restoring the pre-installed software from the hard disk drive.
When re-setting up your hard disk, do not change, delete or add partitions in a
manner other than specified in the manual. Otherwise, space for software may be
destroyed.
In addition, if you use a third-party partitioning program to reconfigure partitions on
your hard disk, it may become impossible to re-setup your computer.
1. Turn off your computer.
2. Hold down the 0 (zero) key on the keyboard and turn on your computer. When
“TOSHIBA Leading Innovation >>>” appears, release the 0 (zero) key on the
keyboard.
3. A menu appears. Follow the on-screen instructions.
You can not use System Recovery Options if restoring the pre-installed
software without System Recovery Options.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-11
Getting Started
Restoring the preinstalled software from
Recovery Media
If the preinstalled files are damaged, use the Recovery Media you created, or
HDD recovery to restore them. To restore the operating system and all preinstalled
software, follow the steps below.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
1. Load the Recovery Media in the optional optical media drive and turn off the
computer’s power.
2. Hold down the F12 key and turn on the power. When TOSHIBA Leading
Innovation >>> appears, release the F12 key.
3. Use the upper or lower cursor key to select the CD/DVD in the display menu.
4. A menu appears. Follow the on-screen instructions.
When you removed pre-installed drivers/ utilities or when installing, you can
setup the respective drivers/ utilities from “TOSHIBA Applications and Drivers”
on desktop.
3-12
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 4
Operating Basics
This chapter gives information on basic operations including using the TouchPad,
optical media drives, sound system, modem, the wireless LAN and LAN. It also
provides tips on caring for your computer.
Using the TouchPad
To use the TouchPad, simply touch and move your finger tip across it in the
direction you want the on-screen pointer to go.
2
1
TouchPad and TouchPad control buttons
1.
TouchPad Control Buttons
2.
TouchPad
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-1
Operating Basics
Two buttons below the keyboard are used like the buttons on a mouse pointer.
Press the left button to select a menu item or to manipulate text or graphics
designated by the pointer. Press the right button to display a menu or other
function depending on the software you are using.
Do not press on the TouchPad too hard or press a sharp object such as a ball
point pen against the TouchPad. The TouchPad could be damaged.
For some functions, you can tap the TouchPad instead of pressing a control
button.
Click: Tap the TouchPad once
Double-click: Tap the TouchPad twice
Drag and drop:
1. Hold down the left control button and move the cursor to drag the item
you want to move.
2. Lift your finger to drop the item where you want it.
Scroll:
Vertical: Move your finger up or down the right edge of the TouchPad.
Horizontal: Move your finger left or right along the bottom edge of the
TouchPad.
Using the fingerprint sensor
This product has a fingerprint utility installed for the purpose of enrolling and
recognizing fingerprints. By enrolling the ID and password to the fingerprint
authentication device, it is no longer necessary to input the password from the
keyboard. Just by swiping the finger against the fingerprint sensor, the following
functions will be enabled:
n
n
n
Logon to Windows and access a security-enabled homepage through IE
(Internet Explorer).
Files and folders can be encrypted/decrypted and third party access to them
prevented.
Disable the password-protected screen-saver when returning from power-
saving (Sleep) mode.
n
n
Pre-OS feature and Single Sign-On feature.
Authentication of the User Password and Hard Disk Password when booting
up the computer.
To “swipe” refers to the action of reading a fingerprint using the fingerprint
sensor.
4-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
How to swipe the finger
Using the following steps when swiping fingers for fingerprint registration or
authentication will help to minimize authentication failures:
1. Align the first joint of the finger to the center of the sensor. Lightly touch the
sensor and swipe finger levelly towards you.
2. While lightly touching the sensor, swipe the finger towards you until the sensor
surface becomes visible.
3. Ensure the center of the fingerprint is on the sensor when swiping the finger.
Slide the finger over the recognition sensor
n
n
Avoid swiping with the finger stiff or pressed-on too hard:
Fingerprint reading may fail if the center of the fingerprint is not touching
on the sensor, or when finger is swiped while pressing hard. Make sure
that the center of the fingerprint is touching the sensor before swiping.
Confirm the center of the fingerprint whirl before swiping:
The thumb’s fingerprint has a bigger whirl, which is prone to misalignment
and distortions. This will cause difficulty in registration and a drop in the
authentication success rate. Always confirm the center of the fingerprint
whirl so that it is swiped along the centerline of the sensor.
n
When fingerprint reading is not successful:
There is a possibility of authentication failures if the finger is swiped too
quickly or too slowly. Follow the onscreen instructions to adjust the speed
of the swipe.
User’s Manual
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Points to note about the fingerprint sensor
Failure to follow these guidelines might result in (1) damage to the sensor or
cause sensor failure, (2) finger recognition problems, or lower finger recognition
success rate.
n
n
n
Do not scratch or poke the sensor with your nails or any hard or sharp objects.
Do not press the sensor strongly.
Do not touch the sensor with a wet finger or any wet objects. Keep sensor
surface dry and free of water vapor.
n
Do not touch the sensor with a soiled finger. Minute foreign particles on a
soiled or dirty finger may scratch the sensor.
n
n
Do not paste stickers or write on the sensor.
Do not touch the sensor with a finger or any object with built-up static
electricity.
Observe the following before you place your finger on the sensor whether for
fingerprint enrollment/registration or recognition.
n
n
Wash and dry your hands thoroughly.
Remove static electricity from your fingers by touching any metal surface.
Static electricity is a common cause of sensor failures, especially when the
weather is dry.
n
n
Clean the sensor with a lint-free cloth. Do not use detergent to clean the
sensor.
Avoid the following finger conditions for enrollment or recognition as they may
result in fingerprint enrollment errors or a drop in the fingerprint recognition
success rate
n
n
n
n
n
Soaked or swollen finger (e.g. after taking bath)
Injured finger
Wet finger
Soiled or oily finger
Extremely dry skin condition on finger
Observe the following to improve the fingerprint recognition success rate.
n
n
Enroll two or more fingers.
Enroll additional fingers if recognition failure occurs often using enrolled
fingers.
n
Check your finger condition. Changed conditions, such as injured, rough,
extremely dry, wet, soiled, dirty, oily, soaked, swollen fingers, may lower the
recognition success rate. Also if the fingerprint is worn down or the finger
becomes thinner or fatter, the recognition success rate may be lowered.
4-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
n
The fingerprint for each finger is different and unique. Please ensure that only
the registered or enrolled fingerprint or fingerprints are used for identification.
n
n
Check sliding position and speed.
The fingerprint sensor compares and analyzes the unique characteristics in a
fingerprint. However, there may be instances where certain users are unable
to register their fingerprints due to insufficient unique characteristics in their
fingerprints.
n
The recognition success rate may differ from user to user.
Fingerprint sensor limitations
n
The fingerprint sensor compares and analyzes the unique characteristics in a
fingerprint.
n
A warning message will be displayed when recognition is abnormal or
recognition is not successful within a fixed duration.
n
n
The recognition success rate may differ from user to user.
Toshiba does not guarantee that this fingerprint recognition technology will be
error-free.
n
Toshiba does not guarantee that the fingerprint sensor will recognize the
enrolled user or accurately screen out unauthorized users at all times. Toshiba
is not liable for any failure or damage that might arise out of the use of this
fingerprint recognition software or utility.
Points to note about the fingerprint utility
n
If Windows Vista™’s file encryption function EFS (Encryption File System) is
used to encrypt a file, the file cannot be further encrypted using the encryption
function of this software.
n
You can back up the fingerprint data or the information registered to Automatic
password input in IE.
n
n
Please use Import/Export on TOSHIBA Fingerprint Utility main menu.
Please also refer to the fingerprint utility Help file for more information.
You can start it using the following method:
n
Click Start, point to All Programs, point to TOSHIBA, point to Utilities,
point to TOSHIBA Fingerprint Utility and click it. The main screen is
displayed. Click “?” in the lower left corner of the screen.
Set up procedure
Please use the following procedure when first using fingerprint authentication.
Fingerprint registration
Enroll the required authentication data using the Fingerprints Enrollment Wizard.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5
Operating Basics
n
n
The fingerprint authentication uses the same Windows logon ID and
password. If the Windows logon password has not been setup, please do
so before registration.
This sensor has memory space for at least 20 fingerprint patterns. You
might be able to register more fingerprint patterns depending on the
sensor memory usage.
1. Click Start, point to All Programs, point to TOSHIBA, point to Utilities, point
to TOSHIBA Fingerprint Utility and click it. Or double click the icon in the
Task Bar.
2. The Enter Windows Password screen is displayed. Enter a password into the
Enter Windows Password field. Click Next.
3. The Enroll screen is displayed. Click the non-enrolled finger icon above the
finger and click Next.
4. The note for enrollment operation screen is displayed. Confirm the message
and click Next.
5. The Scanning Practice screen is displayed. You can practice swiping your
finger. When you have finished practicing swiping your finger, click Next.
6. The last step for enrollment screen is displayed. Swipe three times with the
same finger. If scan of fingerprint succeeds, “ Enrollment succeed. Do
you want to save this template?” will show, click “OK”.
7. In case of finger injury or authentication failure, it is recommended that
another fingerprint also be enrolled. The following message will be displayed:
[Strongly recommended to do one more enroll.]Click OK and
repeat steps 3, 4, 5 and 6 with another finger.
How to delete the fingerprint data
Saved fingerprint data is stored in the Non-volatile memory inside the fingerprint
sensor. If you hand over the PC to others, or dispose of it, the following operations
are recommended.
1. Click Start, point to All Programs, point to TOSHIBA, point to Utilities, point
to TOSHIBA Fingerprint Utility and click it. .
2. The TOSHIBA Fingerprint Utility main menu is displayed.
3. “Are you sure you want to delete this template?” will
be displayed on screen, click OK button. If you want to delete the other
fingerprints, repeat step 2, 3.
n
To delete for all user’s fingerprints:
1. Click “Run as administrator” in lower left. If UAC setting for Windows
is off, this button will not appear.
4-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
2. User Account Control window is displayed when you click a Run as
administrator. Select Allow on User Account Control window.
3. Swipe your enrolled finger.
4. Click Fingerprint control.
5. Click Delete All button in the lower right.
6. “Are you sure you want to delete all fingerprints?”
will be displayed on screen, click OK button.
Windows logon via fingerprint authentication
In place of the usual Windows logon by ID and password, fingerprint
authentication also allows logon to Windows.
This is useful especially when many users are using the PCs, as user selection
can be skipped.
Fingerprint authentication procedure
1. Start up the computer.
2. The Logon Authorization screen is displayed. Choose any of the enrolled
fingers and swipe the fingerprint on the sensor. If authentication is successful,
the user will be logged on to Windows.
n
n
If the fingerprint authentication fails, please logon using the Windows
logon password.
Please logon using the Windows logon password if the fingerprint
authentication failed for five times. To logon using the Windows logon
password, enter the Windows logon password at the [Welcome] screen as
normal.
n
A warning message will be displayed when authentication is abnormal or
authentication is not successful within a fixed duration.
Fingerprint system boot authentication
General
The fingerprint authentication system can be used to replace the keyboard based
User Password authentication system when booting up
If you do not want to use the fingerprint authentication system for password
authentication when booting up, but prefer to use the keyboard-based system
instead, press the ESC key or click Switch User button when the Fingerprint
System Authentication screen is displayed. This will switch the password input
screen to the keyboard-based one.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-7
Operating Basics
n
n
It is necessary to register the User Password before using the fingerprint
Pre-OS feature and its extended function, the fingerprint Single Sign-On
feature. Please use TOSHIBA HW Setup to register the User Password.
If you fail fingerprint authentication more than five times, you must
enter the User Password or Supervisor Password manually to start the
computer.
n
n
When swiping, please do it slowly and at a constant speed. If this does
not improve the authentication rate, please adjust the speed.
If there are any changes in the environment or settings related to
authorization, you will be required to provide authorization information
such as a User Password and HDD password.
Fingerprint Single Sign-On feature
General
This is a feature that allows the user to complete the authentication for both the
User Password (and optionally, the HDD user and Supervisor passwords) and
logging on to Windows using only one fingerprint authentication when booting
up. It is necessary to register the User Password and Windows Logon password
before using the fingerprint Pre- OS feature and this fingerprint Single Sign-On
feature. Please use TOSHIBA HW Setup to register your User Password.
Only one fingerprint authentication is required to replace the User Password
(and, if selected, the HDD user and Supervisor passwords) and Windows Logon
password.
How to enable fingerprint system boot
authentication settings and Single Sign-on feature
It is necessary to first enroll your fingerprint with the TOSHIBA Fingerprint Utility
and Single Sign-on feature prior to enabling and configuring the fingerprint Pre-
OS feature.
Check that your fingerprint is enrolled before configuring the settings.
1. Logon as Administrator means a user has administrator privileges.
2. Click Start, point to All Programs, point to TOSHIBA, point to Utilities, point
to TOSHIBA Fingerprint Utility and click it.
3. Swipe your finger across the fingerprint sensor.
4. Click Run As Administrator. If UAC setting for windows is off, this button
won’t appear.
4-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
5. User Account Control window is displayed when you click a Run as
administrator. Select Allow on User Account Control window.
6. Swipe your finger across the fingerprint sensor.
7. Click Setting.
8. Place a check mark in Boot authentication if you want to use the Single
Sign-on feature, also check on Single Sign-on.
9. Click “Apply”.
10. “Save succeeded” is displayed. Click “OK”.
11. Click Close.
12. “Are you sure to close this window?” is displayed. Click “OK”.
13. Click Close.
14. “Are you sure to close this window?” is displayed. Click “OK”.
The modified configuration for fingerprint Pre-OS feature becomes effective the next
time the system is booted up.
Fingerprint utility limitations
TOSHIBA does not guarantee that the fingerprint utility technology will be
completely secure or error-free. TOSHIBA does not guarantee that the fingerprint
utility will accurately screen out unauthorized users at all times. TOSHIBA is not
liable for any failure or damage that might arise out of the use of the fingerprint
software or utility.
n
The fingerprint sensor compares and analyzes the unique characteristics
in a fingerprint. However, there may be instances where certain users
are unable to register their fingerprints due to insufficient unique
characteristics in their fingerprints.
n
The recognition success rate may differ from user to user.
USB Sleep and Charge function
Your computer can supply USB bus power (DC5V) to the USB port even when
the power of the computer is turned OFF. “Power OFF” includes Sleep Mode,
Hibernation Mode or shutdown state.
This function can only be used for ports that support the USB Sleep and Charge
function (hereinafter called “compatible ports”).
Compatible ports are USB ports that have the ( ) symbol icon.
You can use the “USB Sleep and Charge function” to charge certain USB-
compatible external devices such as mobile phones or portable digital music
players.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-9
Operating Basics
However, the “USB Sleep and Charge function” may not work with certain external
devices even if they are compliant with the USB specification. In those cases, turn
the power of the computer ON to charge the device.
n
n
The “USB Sleep and Charge function” only works for compatible ports.
This function is disabled in the default setting. To enable it, you must
change [Disabled] to [Enabled] in the BIOS Setup.
When “USB Sleep and Charge function” is set to [Enabled] in BIOS Setup,
USB bus power (DC5V) will be supplied to compatible ports even when
the power of the computer is turned OFF.
USB bus power (DC5V) is similarly supplied to the external devices which
are connected to the compatible ports. However, some external devices
cannot be charged solely by supplying USB bus power (DC5V).
As for the specifications of the external devices, please contact the
device manufacturer or check the specifications of the external devices
thoroughly before use.
n
n
Using the USB sleep and charge function to charge external devices will
take longer than charging the devices with their own chargers.
If external devices are connected to compatible ports when the AC
adaptor is not connected to the computer, the battery of the computer will
be depleted even when the power of the computer is turned OFF.
As such, we recommend that you connect the AC adaptor to the computer
when using the USB sleep and charge function.
n
n
External devices connected to the USB bus power (DC5V) function that
interfaces with the power ON/OFF of the computer may always be in an
operational state.
When there is a current overflow of the external devices connected to
the compatible ports, USB bus power (DC5V) supply may be stopped for
safety reasons.
n
Metal paper clips or hair pins/clips will generate heat if they come into
contact with USB ports. Do not allow USB ports to come into contact with
metal products, for example when carrying the computer in your bag.
Starting the USB Sleep and Charge Utility
To start the utility, click Start
All Programs
TOSHIBA
Utilities USB
Sleep and Charge.
4-10
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Enabling USB Sleep and Charge
This utility can be used to enable and disable the USB Sleep and Charge function.
Check the “USB Sleep and Charge” checkbox. In the default state, this function is
disabled.Power supply mode settings
There are several USB Sleep and Charge function modes. “Mode 4 (Default)”
should normally be used. Set one of the other modes (try from “Mode 3” to “Mode
1”)*1 if the charge function cannot be used in “Mode 4 (Default)”. This function
may not be able to be used with some connected external devices even if the
appropriate mode is selected. In this situation, uncheck the “USB Sleep and
Charge” checkbox and stop using this function.
*1 Some mode may not be displayed in the list.
Battery Settings
This utility can be used to specify the lower limit of remaining battery life for USB
Sleep and Charge. Move the slider bar to specify the lower limit. If the remaining
battery life falls before the setting, the “USB Sleep and Charge” function will be
stopped. Unchecking the “Enable under Battery Mode” checkbox sets the utility to
only charge when the AC adaptor is connected.
Using the Function buttons
This section describes the Function buttons.
Seven buttons are provided with some models.
Icon
Function button
DVD
*CD/None
ECO
CD/DVD
Launch TOSHIBA
DVD PLAYER
Launch Windows
Media Player
Play/Pause
Previous
Next
Play/Pause
Previous chapter
Next chapter
Mute
Play/Pause
Previous track
Next track
Mute
Mute
Volume UP and
DOWN
Volume UP/DOWN Volume UP/Down
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-11
Operating Basics
Using the Web Camera
This section describes the bundled webcam utility, which can capture still and
video images. The web camera will auto-run when Windows starts.
Please unstick the protective plastic-film before using the Web Camera.
2
1
3
1.
Web Camera LED*
2.
Web Camera*
3.
Built-in Microphone*
* Provided with some models
4-12
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Using TOSHIBA Web Camera Application
TOSHIBA Web Camera Application is pre-configured to start when you turn
on Windows Vista; if you need to restart it go to Start
TOSHIBA Utilities Web Camera Application.
All Programs
1
2
5
6
3
4
1.
4.
Capture Still Image
Video Recording
2.
5.
Open/Close Preview Area
Camera Resolution
3.
6.
Delete Recorded File
Capture Settings
Capture Still Image
1
Click to capture a still image, and see a preview of the captured image in
preview area.
Open/Close Preview Area
Click to open Preview Area. One more to close Preview Area.
2
3
Delete Recorded File
Choose a thumbnail of recorded file and click this button to delete this file
from hard disk.
Video Recording
4
Click to start recording. One moree to stop recording and see preview of the
video in Preview Area.
Camera Resolution
Choose resolution for Preview, Capture, and Record.
5
6
Capture Settings
Open Capture Settings dialog box.
Chooses from the Basic tab to select photo and video saving location,
select Capture Format and Video Quality.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-13
Operating Basics
Using the microphone
Your computer has a built-in microphone that can be used to record monaural
sounds into your applications. It can also be used to issue voice commands to
applications that support such functions.(Built-in microphone is provided with
some models)
Since your computer has a built-in microphone and speaker, “feedback” may be
heard under certain conditions. Feedback occurs when sound from the speaker is
picked up in the microphone and amplified back to the speaker, which amplifies it
again to the microphone.
This feedback occurs repeatedly and causes a very loud, high-pitched noise. It is
a common phenomenon that occurs in any sound system when the microphone
input is output to the speaker (throughput) and the speaker volume is too loud or
too close to the microphone. You can control throughput by adjusting the volume
of your speaker or through the Mute function in the Master Volume panel. Refer to
your Windows documentation for details on using the Master Volume panel.
Using the TOSHIBA Face Recognition
TOSHIBA Face Recognition uses a face verification library to verify the face data
of users when they log in to Windows. The user can thus avoid having to enter a
password or the like, which makes the login process easier. This software is pre-
installed with some models.
Note on Use
n
TOSHIBA Face Recognition does not guarantee the correct identification of
a user. Changes to the likeness of a registrant, such as hair style changes,
wearing a cap, or wearing glasses may affect the recognition rates when such
changes occur after the registrant had registered.
n
n
TOSHIBA Face Recognition may incorrectly recognize faces that are similar to
a registrant.
For high security purposes, TOSHIBA Face Recognition is not a suitable
substitute for Windows passwords. When security is a high priority, use your
established Windows passwords to log in.
n
Bright background light and/or shadows may prevent a registrant from being
recognized correctly. In that case, log in using your Windows password.
If recognition of a registrant fails repeatedly, refer to your computer
documentation to learn ways to improve recognition performance.
Disclaimer
TOSHIBA does not guarantee that the face recognition utility technology willbe
completely secure or error-free. TOSHIBA does not guarantee that the face
recognition utility will accurately screen out unauthorized users at all times.
Toshiba is not liable for any failure or damage that might arise out of the use of the
face recognition software or utility.
4-14
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO
RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS,
PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA
ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN
IF ADVISED OF THE POSSIBILITY THEREOF.
How to register the Face Recognition Data
Take a picture for facial verification purposes, and register the data needed
when you log in. To register the data needed when you log in, follow the steps as
described below:
1. To launch this utility, click Start
All Programs
TOSHIBA
Utilities
TOSHIBA Face Recognition.
n
n
The Registration screen is displayed for a logged-in user whose face has
not been registered.
The Management screen is displayed for a logged-in user whose face
has already been registered.
2. Click the Register face button in the Management screen. The Registration
screen is displayed.
n
n
If you wish to practice, click on the Next button in the Registration screen.
If you do not wish to practice, click on the Next button in the Registration
screen.
3. Click the Next button to start the guide.
4. First, take a picture while moving your neck slightly to the left and right.
5. Now take a picture while moving your neck down and up.
n
Click the Back button to practice the guide once more.
6. Click the Next button to start image-capturing process. Adjust the position of
your face so that it fits within the face-shaped frame.
7. Once your face has been positioned properly, the recording will commence.
Start moving your neck very slightly to the left and right, and then move your
neck down and up.
8. Registration will end after you have repeatedly moved your neck left, right,
down and up. When the register succeeds, below message will be displayed
on the screen:
Registration successful. Now we’ll do the verification
test. Click the Next button.
Click the Next button to perform the verification test.
9. Perform the verification test. Face the screen as you do when you register.
n
If verification fails, click the Back button and re-register. Please refer from
step 6 to step 8.
10. If verification is successful, click the Next button and register an account.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-15
Operating Basics
11. Register the account. Fill in the account registration fields.
Fill in all fields.
n
When you have finished it, click the Next button.
12. The Management screen is displayed. The registered account name will
be displayed. Clicking on it will cause the captured image of your face to be
displayed on the left.
How to Delete the Face Recognition Data
Delete image data, account information, and personal record data created during
registration. To delete the Face Recognition Data, follow the steps as described
below:
1. To launch this utility, click Start
All Programs
TOSHIBA
Utilities
TOSHIBA Face Recognition. The Management screen is displayed.
2. Select a user which is deleted in the Management screen.
3. Click the Delete button. “You are about to delete the user data.
Would you like to continue?” will be displayed on the screen.
n
If you do not want the data to be deleted, click the No button and you will
then be returned to the Management screen.
n
Clicking on the Yes button will remove the selected user from the
Management screen.
How to launch the help file
For further information on this utility, please refer to help file.
1. To launch the help file, click Start
All Programs
TOSHIBA
Utilities
TOSHIBA Face Recognition Help.
Windows Logon via TOSHIBA Face Recognition
This section explains how to login to Windows with TOSHIBA Face Recognition.
Two authentication modes are provided.
n
n
AUTO Mode Login screen: If the face authentication tile is selected by
default, you can log in without using the keyboard or mouse.
1:1 Mode Login screen: This mode is essentially the same as AUTO mode,
but the Select Account screen will appear before the Display Captured Image
screen, and you will need to select the user account to be authenticated in
order to start the authentication process.
AUTO Mode Login screen
1. Turn on the computer.
2. The Select Tiles screen will be displayed.
3. Select Start face recognition.
4. “Please face to the camera” will be displayed.
4-16
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
5. Verification will be performed. If the authentication is successful, the image
data taken in step 4 will be faded in and placed over one another.
n
If an error occurs during authentication, you will be returned to the Select
Tiles screen.
6. Windows Welcome screen will be displayed, and will be logged in
automatically to Windows.
1.1 Mode Login screen
1. Turn on the computer.
2. The Select Tiles screen will be displayed.
3. Select Start face recognition.
4. The Select Account screen will be displayed.
5. Select the account, and click the arrow button.
6. “Please face to the camera” will be displayed.
7. Verification will be performed. If the authentication is successful, the image
data taken in step 6 will be faded in and placed over one another.
n
If an error occurs during authentication, you will be returned to the Select
Tiles screen.
8. Windows Welcome screen will be displayed, and will be logged in
automatically to Windows.
n
If authentication was successful, but an authentication error subsequently
occurred during the login to Windows, you will be asked to provide your
account information.
Using the optical disc drive
The text and illustrations in this section refer primarily to the optical disk drive.
However, operation is the same for all other optical media drives. The full-size
drive provides high-performance execution of CD/DVD/HD DVDbased programs.
You can run either 12 cm (4.72”) or 8 cm (3.15”) CDs/DVDs at tray ODD and
12 cm (4.72”) CDs/DVDs at slot ODD without an adaptor. An ATAPI interface
controller is used for CD/DVD/HD DVD operation. When the computer is
accessing a CD/DVD/HD DVD, an indicator on the drive glows (Only tray ODD).
Refer also to the Writing CD/DVDs on DVD Super Multi Double Layer drive
section for precautions on writing to CD/DVD.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-17
Operating Basics
Loading discs
To load a disc, follow the steps below and refer to the figures.
1. a. When the power is on, press the eject button to open the drawer slightly.
Eject button
Pressing the eject button
b. Pressing the eject button will not open the drawer when the disc drive’s
power is off. If the power is off, you can open the drawer by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole just to the right of the eject button.
Manual release with the eject hole
4-18
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
2. Grasp the drawer gently and pull until it is fully opened.
Pulling the drawer open
3. Place the disc, label side up, in the drawer.
Inserting a disc
When the drawer is fully opened, the edge of the computer will extend slightly
over the disc tray. Therefore, you will need to turn the disc at an angle when
you place it in the tray. After seating the disc, however, make sure it lies flat, as
shown in the figure above.
n
n
Do not touch the laser lens. Doing so could cause misalignment.
Keep foreign matter from entering the drive. Check the back edge of the
tray to make sure it carries no debris before closing the drive.
User’s Manual
4-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
4. Press gently at the centre of the disc until you feel it click into place. The disc
should lie below the top of the spindle, flush with the spindle base.
5. Push the center of the drawer to close it. Press gently until it locks into place.
If the disc is not seated properly when the drawer is closed, the disc might
be damaged. Also, the drawer might not open fully when you press the eject
button.
Closing the disc drawer
4-20
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Slot-loading optical disc drive
For computer with slot-loading optical drive, to load CD/DVD, please follow the
steps below and refer to figures.
1. Turn your computer on.
2. Gently hold the CD/DVD by the edges with label side facing up, and insert it
into the optical disc drive slot straight on slowly.
n
n
Use only round standard (12 cm) discs with this slot-loading optical drive.
Any other size or shape disc may not be able to be removed from the slot
and may damage the system as well as the disc.
Gently push the CD/DVD until it is loaded automatically. Do not push
it forcibly or at an angle to the optical disc drive slot. This may cause
damage or adhesion of foreign matter on the surface of the CD/DVD.
These imperfections may prevent the drive from reading from or writing to
it.
Inserting a disc
Removing discs
To remove the disc, follow the steps below and refer to the figure.
Do not press the eject button while the computer is accessing the disc drive.
Wait for the optical media drive indicator to go out before you open the drawer.
Also, if the disc is spinning when you open the drawer, wait for it to stop before
you remove it.
1. To pop the drawer partially open, press the eject button. Gently pull the drawer
out until it is fully opened.
n
n
When the drawer pops open slightly, wait a moment to make sure the disc
has stopped spinning before pulling the drawer fully open.
Turn off the power before you use the eject hole. If the disc is spinning
when you open the drawer, the disc could fly off the spindle and cause
injury.
User’s Manual
4-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
2. The disc extends slightly over the sides of the drawer so you can hold it. Hold
the disc gently by its edges and lift it out.
Removing a disc
3. Push the centre of the drawer to close it. Press gently until it locks into place.
Slot-loading optical disc drive
For computer with slot-loading optical drive, please follow the steps below and
refer to figures.
1. Make sure that your computer is on.
2. Press the Eject button. The CD/DVD will be ejected about halfway.
Do not place your hand or another object near the optical disc drive slot.
Eject button
Pressing the eject button
4-22
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
3. Gently hold the CD/DVD by the edges and pull it horizontally.
n
Use only round standard (12 cm) discs with this slot-loading optical drive.
Any other size or shape disc may not be able to be removed from the slot
and may damage the system as well as the disc.
Writing CD/DVDs on DVD Super Multi Double Layer
drives
DVD Super Multi Double Layer drive
You can use the DVD Super Multi Double Layer drive to write data to either
CD-R,CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double
Layer), DVD+RW or DVD-RAM discs. The TOSHIBA Disc Creator is provided as
writing software with this computer.
n
n
n
n
writable CD and DVD discs that can be supported by this computer.
Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.
When the power of the optical disc drive is off, the disc tray will not open
even if the eject button is pushed. Use the ODD to turn the power of the
User’s Manual
4-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
n
n
Use only round standard (12 cm) discs with this slot-loading optical drive.
Any other size or shape disc may not be able to be removed from the slot
and may damage the system as well as the disc.
When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live power socket.
It is possible that, if data is written while powered by the battery pack,
the write process may sometimes fail due to low battery power - in these
instances data loss may occur.
Important message
Before you write or rewrite to any of the media supported by the DVD Super
Multi Double Layer drive, please read and follow all of the setup and operating
instructions in this section. If you fail to do so, you may find that the DVD Super
Multi Double Layer drive may not function properly, and you may fail to write or
rewrite information successfully - this may cause you to either lose data or incur
other damage to the drive or media.
Disclaimer
TOSHIBA does not bear responsibility for the following:
n
n
Damage to any CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW,
DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM disc that may be
caused by writing or rewriting with this product.
Any change or loss of the recorded contents of CD-R, CD-RW, DVD-R,
DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or
DVD-RAM media that may be caused by writing or rewriting with this product,
or for any business profit loss or business interruption that may be caused by
the change or loss of the recorded contents.
n
Damage that may be caused by using third party equipment or software.
Given the technological limitations of current optical disc writing drives, you may
experience unexpected writing or rewriting errors due to disc quality or problems
with hardware devices. In view of this, it is good practice to make two or more
copies of important data, in case of any undesired change or loss of the recorded
contents.
4-24
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Before writing or rewriting
n
Based on TOSHIBA’s limited compatibility testing, we suggest the following
manufacturers of CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW,
DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM media, however,
it must be noted that disc quality can affect write or rewrite success rates.
Please also be aware that in no event does TOSHIBA guarantee the
operation, quality or performance of any disc.
CD-R:
TAIYO YUDEN CO., Ltd.
MITSUBISHI KAGAKU MEDIA CO., LTD.
CD-RW: (High-Speed, Multi-Speed)
MITSUBISHI KAGAKU MEDIA CO., LTD.
CD-RW: (Ultra-Speed)
MITSUBISHI KAGAKU MEDIA CO., LTD.
DVD-R:
DVD Specifications for DVD-R Disc for General Version 2.0
HITACHI MAXELL, LTD.
PANASONIC COMMUNICATIONS CO., LTD.
TAIYO YUDEN Co., LTD.
DVD+R:
MITSUBISHI KAGAKU MEDIA CO., LTD.
DVD-RW:
DVD Specifications for DVD-RW Disc for General Version 1.2
MITSUBISHI KAGAKU MEDIA CO., LTD.
VICTOR COMPANY OF JAPAN, LTD.
DVD+RW:
MITSUBISHI KAGAKU MEDIA CO., LTD.
DVD-RAM:
DVD Specifications for DVD-RAM Disc for Version 2.0, 2.1, or 2.2
PANASONIC COMMUNICATIONS CO., LTD.
HITACHI MAXELL., LTD.
DVD+R DL:
MITSUBISHI KAGAKU MEDIA CO., LTD.
DVD-R DL:
MITSUBISHI KAGAKU MEDIA CO., LTD.
DVD-R for Labelflash™:
FUJIFILM CORPORATION.
DVD+R for Labelflash™:
FUJIFILM CORPORATION.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-25
Operating Basics
n
DVD Super Multi Double Layer drive cannot use discs that allow writing
faster than 16x speed (DVD-R and DVD+R media), 8x speed (DVD-R
(Dual Layer), DVD+RW and DVD+R (Double Layer) media), 6x speed
(DVD-RW media), 5x speed (DVD-RAM media).
n
Some types and formats of DVD-R (Dual Layer) and DVD+R (Double
Layer) discs may be unreadable.
n
n
2.6 GB and 5.2 GB DVD-RAM media cannot be read from or written to.
DISC created in DVD-R (Dual Layer) format4 (Layer Jump Recording)
cannot be read.
n
n
n
If the disc is poor in quality, or is dirty or damaged, writing or rewriting errors
may be noted - ensure that you check all discs for dirt or damage before you
use them.
The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or DVD-RAM
media will be affected by the quality of the disc itself and the way in which it is
used.
There are two types of DVD-R media available, authoring discs and general
use discs. Do not attempt to use authoring discs as only general use discs can
be written to by a computer drive.
n
n
You can use both DVD-RAM discs that can be removed from a cartridge and
DVD-RAM discs designed without a cartridge.
You may find that other computer DVD-ROM drives or other DVD players may
not be able to read DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer) or DVD+RW discs.
n
n
Data written to a CD-R, DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R
(Double Layer) discs cannot be deleted either in whole or in part.
Data deleted/erased from a CD-RW, DVD-RW, DVD+RW or DVD-RAM disc
cannot be recovered. You must check the content of the disc carefully before
you delete it, taking care that, if multiple drives that can write data to discs are
connected, you do not delete data from the wrong one.
n
n
In writing to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double
Layer), DVD+RW or DVD-RAM media, some space is required for file
management, so you may not be able to write to the full capacity of the disc.
Since the disc is based on the DVD standard, it might be filled with
dummy data if the written data is less than about 1 GB. Therefore, in these
circumstance, even if you write only a small amount of data, it might take
additional time to fill in the dummy data.
n
When multiple drives that can write data to discs are connected, be sure that
you do not write to or delete data from the wrong drive.
4-26
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
n
n
Be sure to connect the AC adaptor to the computer before you write or rewrite
any information.
Before you enter either Sleep Mode or Hibernation Mode, take care to ensure
that any DVD-RAM writing has been completed. In this instance, writing is
finished if you can eject the DVD-RAM media.
n
n
n
n
Be sure to close all other software programs except for the writing software
itself.
Do not run software such as a screen saver which can put a heavy load on the
processor.
Operate the computer at its full power settings - do not use any powersaving
features.
Do not write information while virus checking software is running, instead wait
for it to finish, then disable the virus protection applications, including any
software that checks files automatically in the background.
n
Do not use any hard disk utilities, including those that are intended to enhance
hard disk drive access speeds, as they may cause unstable operation and
damage data.
n
n
CD-RW (Ultra Speed +) media should not be used as data may be lost or
damaged.
You should always write from the computer’s hard disk drive onto the CD/DVD
- do not try to write from shared devices such as a server or any other network
device.
n
Writing with software other than TOSHIBA Disc Creator has not been
confirmed, therefore operation with other software applications cannot be
guaranteed.
When writing or rewriting
Please observe the following points while you write or rewrite data to CD-R, CD-
RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer),
DVD+RW or DVD-RAM media:
n
Always copy data from the hard disk drive to the optical media - do not use the
cut-and-paste function as the original data will be lost if there is a write error.
n
n
n
Do not perform any of the following actions:
Change users in the Windows Vista operating system.
Operate the computer for any other function, including such tasks as using a
mouse or Touch Pad, or closing/opening the display panel.
n
n
Start a communication application such as a modem.
Apply impact or vibration to the computer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-27
Operating Basics
n
Install, remove or connect external devices, including such items as an
ExpressCard, SD/SDHC memory card, USB device, external monitor, i.LINK
device, or an optical digital device.
n
n
n
Use the audio/video control button to reproduce music or voice.
Open the optical disc drive.
Do not use shut down, log off, Sleep Mode or Hibernation Mode functions
while writing or rewriting.
n
Make sure that the write/rewrite operation is completed before going into
either Sleep Mode or Hibernation Mode (writing is completed if you can
remove an optical media on the optical disc drive).
n
n
If the media is of poor quality, or is dirty or damaged, writing or rewriting errors
may occur.
Set the computer on a level surface and avoid places subject to vibration
such as airplanes, trains or cars. In addition, do not use the computer on an
unstable surface such as a stand.
n
Keep mobile phones and other wireless communication devices away from
the computer.
TOSHIBA Disc Creator
Please be aware of the following limitations when you use the TOSHIBA Disc
Creator:
n
n
n
DVD Video cannot be created using TOSHIBA Disc Creator.
DVD Audio cannot be created using TOSHIBA Disc Creator.
You cannot use TOSHIBA Disc Creator’s ‘Audio CD for Car or Home CD
Player’ function to record music to DVD-R, DVD-R (Dual Layer), DVD-RW,
DVD+R, DVD+R (Double Layer) or DVD+RW media.
n
n
n
Do not use the “Disc Backup” function of TOSHIBA Disc Creator in order to
copy DVD Video or DVD-ROM material that has copyright protection.
DVD-RAM discs cannot be backed up using the “Disc Backup” function of
TOSHIBA Disc Creator.
You cannot back up CD-ROM, CD-R or CD-RW media to DVD-R, DVD-R
(Dual Layer) or DVD-RW media using the “Disc Backup” function of TOSHIBA
Disc Creator.
n
n
You cannot back up CD-ROM, CD-R or CD-RW media to DVD+R, DVD+R
(Double Layer) or DVD+RW media using the “Disc Backup” function of
TOSHIBA Disc Creator.
You cannot back up DVD-ROM, DVD Video, DVD-R, DVD-R (Dual Layer),
DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW to CD-R or CD-RW
media using the ‘Disc Backup’ function of TOSHIBA Disc Creator.
4-28
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
n
n
TOSHIBA Disc Creator cannot record in packet format.
You might not be able to use the “Disc Backup” function of TOSHIBA Disc
Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer) or DVD+RW disc that was made with other software on a
different optical media recorder.
n
If you add data to a DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R (Double
Layer) disc that you have already recorded to, you might not be able to read
the added data under some circumstances. For example, it cannot be read
under 16-bit operating systems, such as Windows 98SE and Windows Me,
while in Windows NT4 you will need Service Pack 6 or later, and in Windows
2000, you will need Service Pack 2. In addition to this, some DVD-ROM and
DVD-ROM/CD-R/RW drives cannot read this added data regardless of the
operating system.
n
n
TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to
achieve this you should use Windows Explorer or another similar utility.
When you back up a DVD disc, be sure that the source drive supports
recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double
Layer) or DVD+RW media - if this is not the case then the source disc might
not be backed up correctly.
n
n
When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer) or DVD+RW disc, be sure to use the same type of disc.
You cannot partially delete any data written to a CD-RW, DVD-RW or
DVD+RW disc.
Data Verification
To verify that data has been written or rewritten correctly to a data CD/DVD you
should follow the steps below before you begin the write/rewrite process:
1. Display the setting dialog box by one of the following two steps:
n
Click the Recording settings button (
in the Data Disc mode.
) for writing on the main toolbar
n
Select Settings for Each Mode
Data CD/DVD in the Settings menu.
2. Mark the Verify Written Data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.
How to learn more about TOSHIBA Disc Creator
Please refer to the Help files for additional TOSHIBA Disc Creator information.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-29
Operating Basics
Video
You can record using Corel DVD MovieFactory for TOSHIBA.
When Using Corel DVD MovieFactory for
TOSHIBA
How to make a Labelflash DVD
Simplified steps for making a Labelflash DVD:
1. Insert a Labelflash disc in DVD drive.
Set PRINTING SIDE surface for underside.
2. Click Start
All Programs
DVD MovieFactory for TOSHIBA
DVD
Movie Factory Launcher to launch DVD Movie Factory.
3. Click Create Disc Label. Corel Label@Once is started.
4. Click the General tab.
5. Choose DVD Drive for Printer. e.g. <E:> PIONEER DVD…
6. Add and customize the look of your images and text.
7. Click Label Flash setting and choose Draw Quality.
8. Click Print.
How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a DV-
Camcorder:
1. Click Start
All Programs
DVD MovieFactory for TOSHIBA
DVD
Movie Factory Launcher to launch DVD MovieFactory.
2. Insert a DVD-RW or DVD+RW disc in Burner.
3. Click Video Disc
Burn Video to Disc to launch Direct Recording dialog
box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.
4. Choose DVD-Video format.
5. Confirm the capture source is DV.
6. Press Capture button.
Simplified steps for making a DVD-Video from adding video source:
1. Click Start
All Programs
DVD MovieFactory for TOSHIBA
DVD
Movie Factory Launcherto launch DVD MovieFactory.
2. Click Video Disc
New Project to invoke 2nd Launcher ,choose your
project type, then invoke DVD MovieFactory.
4-30
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
3. Add source from HD Disk by click Add video files button to invoke browser
dialog box.
4. Choose the source video then go to Next page to apply Menu.
5. After choose the menu template, press Next button to go to Burning Page.
6. Choose the output type then press Burn button.
How to learn more about Corel DVD MovieFactory
Please refer to the Help and Manual files for additional Corel DVD MovieFactory
information.
Important information for use
Note the following limitations when you write Video DVD:
1. Editing digital video
n
n
Log in with Administrator rights to use DVD MovieFactory.
Make sure that your computer is running on AC power when using DVD
MovieFactory.
n
n
Operate the computer at Full Power. Do not use power-saving features.
While you are editing DVD, you can display preview. However, if another
application is running the preview might not display properly.
n
n
n
DVD MovieFactory cannot edit or play copy protected content.
Do not enter sleep or hibernation mode while using DVD MovieFactory.
Do not operate DVD MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
n
n
When recording to a DV-Camcorder, to ensure you capture all of your
data, let the camcorder record for a few seconds before you begin
recording your actual data.
CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
n
n
While recording video to DVD, please close all other programs.
Do not run software like a screen saver because it can put a heavy load
on the CPU.
n
Do not support mp3 decode and encode.
2. Before recording the video to DVD
n
When you record DVD disc, please use only discs recommended by the
Drive manufacturer.
n
Do not set the working drive to a slow device like a USB1.1 hard disk
drive or it will fail to write DVD.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-31
Operating Basics
n
Do not perform any of the following actions:
n
Operate the computer for any other function, including using a mouse
to TouchPad or closing/Opening the LCD panel.
n
n
Bump or cause vibration to the computer.
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
n
n
Open the DVD drive.
Install, remove or connect external devices, including the following:
PC card, SD card, USB device, external display, i.LINK. devices,
optical digital devices.
n
n
n
Please verify your disc after recording important data.
DVD-R/+R/+RW disc cannot be written in VR format.
Not support to output VCD and SVCD format.
3. About Straight to Disc
n
n
n
n
Not support to record on DVD-R/+R disc
Not support to record DVD+VR format by HDV
HDV support to burn DVD-Video only
DVD-VR format not support to add Menu
4. About recorded DVDs
n
n
n
Some DVD-ROM drives for personal computers or other DVD players
may not be able to read DVD-R/+R/-RW/-RAM discs.
When playing your recorded disc on your computer, please use WinDVD
software application.
If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
TOSHIBA DVD PLAYER
This software is provided for playback of DVD Video.
It has an on-screen interface and functions. Click Start
All Programs
TOSHIBA DVD PLAYER TOSHIBA DVD PLAYER.
For details on how to use TOSHIBA DVD PLAYER, see the help file.
Please be aware of the following limitations when you use the TOSHIBA DVD
PLAYER:
4-32
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Notes on use
n
Frame dropping, audio skipping or out of synch audio and video may occur
during playback of some DVD Video titles.
n
Close all other applications when using the “TOSHIBA DVD PLAYER”. Do not
open any other applications or do not carry out any other operations during
DVD Video playback. Playback may stop or not function properly in some
situations.
n
n
n
Unfinalized DVDs created on home DVD recorders may not be playable on
the computer.
Use DVD-Video discs with a region code which is either “the same as the
factory default setting” or “ALL”.
Do not playback DVD discs Video while watching or recording television
programs using other applications. Doing so may cause DVD Video playback
or television program recording errors. In addition, if prescheduled recording
starts during DVD Video playback it may cause DVD Video playback or
television program recording errors. Please view DVD Video during times
when there is no recording prescheduled.
n
n
The resume function cannot be used with some discs on the “TOSHIBA DVD
PLAYER”.
It is recommended the AC adaptor be connected when playing DVD-Video.
Power saving features may interfere with smooth playback. When playing
DVD-Video using battery power, set the Power Options to “High performance”.
n
Screen savers will not display while playing a movie in the “TOSHIBA DVD
PLAYER”. The computer will also not go into Sleep Mode, Hibernation Mode
or shutdown while using “TOSHIBA DVD PLAYER”.
n
n
n
Do not configure the Display automatic power off function to run while the
“TOSHIBA DVD PLAYER” is running.
Do not switch to Hibernation or Sleep Mode when running the “TOSHIBA DVD
PLAYER”.
Do not lock the computer using the Windows logo ( ) + L keys or the Fn + F1
keys when running the “TOSHIBA DVD PLAYER”.
Media care
This section provides tips on protecting data stored on your CD’s, DVD’s and
floppy diskettes. Handle your media with care. Following the simple precautions
listed below will increase the lifetime of your media and protect the data stored on
it.
CD/DVDs
1. Store your CD’s and DVD’s in the containers they originally came in to protect
them and keep them clean.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-33
Operating Basics
2. Do not bend the CD’s or DVD’s.
3. Do not write on, apply a sticker to, or otherwise mar the surface of the CD or
DVD that contains the data.
4. Hold the CD or DVD by its outside edge or the edge on the center hole - any
fingerprints on the surface of the disc can prevent the drive from properly
reading data.
5. Do not expose the CD or DVD to direct sunlight, extreme heat or cold.
6. Do not place heavy objects on your CD’s or DVD’s.
7. If your CD’s or DVD’s become dusty or dirty, wipe them with a clean dry
cloth from the center hole outwards - do not wipe in a circular direction. If
necessary, you can use a cloth that has been lightly dampened in water or a
neutral cleaner but you must not use benzine, thinner or any similar cleaning
solution.
Floppy diskettes
1. Store your floppy diskettes in the container they came in to protect them and
keep them clean. If a floppy diskette becomes dirty, clean it with a soft, lightly
dampened cloth - do not use cleaning fluid.
2. Never open the shutter or touch the magnetic surface of your floppy diskette
- doing this could permanently damage it and lose data.
3. Always handle floppy diskettes with care to prevent the loss of stored data.
4. Always apply the floppy diskette label in the correct location and never apply
a new label on top of an existing one - in this instance the label could come
loose and damage the floppy diskette drive.
5. Never use a pencil for writing on a floppy diskette label as the dust from the
pencil lead could cause a system malfunction if it found its way onto the
computer’s components. In this instance, always use a felt-tipped pen and
write the label first before applying it to the floppy diskette.
6. Never put a floppy diskette in a location where water or other liquid may make
contact with it, or where it is excessively damp - either of these conditions
could cause data loss.
7. Never use a wet or damp floppy diskette - this could damage the floppy
diskette drive or other devices within the computer.
8. Data may be lost if the floppy diskette is twisted, bent, or exposed to direct
sunlight, extreme heat or cold.
9. Do not place heavy objects on your floppy diskettes.
10. Do not eat, smoke, or use items such as erasers near your floppy diskettes
as foreign particles inside the jacket of the floppy diskette can damage the
magnetic surface.
11. Magnetic energy can destroy the data on your floppy diskettes. In view of this
you should keep your floppy diskettes away from speakers, radios, televisions
and other sources of magnetic fields.
4-34
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Sound system
This section describes some of the audio control functions.
Adjusting System Volume
You can control the overall level of sound using Windows Volume Mixer.
To launch Volume Mixer, follow the steps below.
1. Locate the Speaker icon on the task tray.
2. Right-click the Speaker icon on the task tray.
3. Select Open Volume Mixer from the menu.
Click the Device button to display available playback devices. Select Speakers to
use the internal speakers for listening. Adjust speaker volume by moving the slider
up or down to raise or lower the volume. Click the Mute button to mute the sound.
You may see another control under Applications in Volume Mixer. It is the
control for an application which is currently running. The Windows Sounds is
always displayed since it controls the system sounds’ volume.Changing System
Sounds
System sounds are assigned to inform you when certain events happen. This
section explains how select an existing scheme or save one you have modified.
To launch the configuration dialog window for system sounds, follow the steps
below:
1. Right-click the Speaker icon on the task tray.
2. Select Sounds from the memu.
Realtek HD Audio Manager
You can confirm and change the audio configuration using the Realtek Audio
Manager. To launch the Realtek Audio Manager, Click Start
Control Panel
Hardware and Sound Realtek HD Audio Manager. When you first
launch the Realtek Audio Manager, you will see following device tabs. Speakers
is the default output device. Microphone is the default input device. To change
the default device, click the Set Default Device button under the chosen device
tab.
n
n
Speakers is the default output device. Select it when using the internal
speakers or headphones.
Digital Output should be selected when connecting the optical cable to the
Headphone, S/PDIF and Line out jack for playing digital sound on digital audio
equipment. Digital Output can only be used by connecting an optical audio
cable.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-35
Operating Basics
n
Microphone is the default input device. It should be selected when using the
computer’s internal microphone or an external microphone connected the
Microphone to record sound.
Information
Click the Information button to view hardware information, software information,
and language setting.
Speaker Configuration
Click the playback button to confirm the internal speakers or the headphone
sound is coming from the right direction.
Sound Effects
This section explains how to select various sound effects.
n
n
n
Environment - simulates reverberations of sound for familiar environments
around us. You can select an existing preset in the menu.
Equalizer- raises or lowers a frequency of sound to simulate a popular genre
of music. You can select an existing preset in the menu.
Karaoke - Cancels the specific frequency of sound and results in the Vocal
Cancellation. Clicking the Karaoke icon, lowers the vocal sound within
music. Using the arrow buttons will adjust the musical key of the sound.
Microphone Effects
Microphone Effects are only found within the Microphone window.
n
n
Noise Suppression reduces background noise and fan noise.
Accoustic Echo Cancellation reduces feedback and feedback echo.
Default Format
You can change the sample rate and bit depth of sound.
Dolby Sound Room®
Dolby Sound Room provides stunning personal surround sound from any pair
of speakers or headphones. Ideal when using surround sound speakers is not
practical. Dolby Sound Room enables an enveloping entertainment experience.
Dolby Sound Room technologies
n
n
n
Dolby Headphone - Personal surround sound using any set of headphones
so that listeners feel like the action is happening all around them.
Sound Space Expander - Widens the sound experience to “wrap” around the
listener.
Natural Bass - Extends the bass response of any speakers by up to an
octave.
4-36
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
To open the user interface of Dolby Sound Room, steps as detailed below:
1. Click the right button of a mouse on the speaker icon on the Windows Taskbar,
and select Playback Devices in the submenu.
2. On the Playback tab, select Speakers, and click Properties.
3. Click the Dolby tab.
Modem
This section describes how to connect and disconnect the internal modem to and
from a telephone jack.
The internal modem does not support voice functions. All data and fax
functions are supported.
n
n
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you will need
to make sure the internal modem’s settings are correct for the region in which it
will be used.
To select a region, follow the steps below.
1. Click start, point to All Programs, TOSHIBA, Networking, and click Modem
Region Select.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the Country/
Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Task Bar. Click the icon with the
primary mouse button to display a list of regions that the modem supports. A
sub menu for telephony location information will also be displayed. A check
will appear next to the currently selected region and telephony location.
3. Select a region from the region menu or a telephony location from the
submenu.
n
When you click a region it becomes the modem’s region selection, and
the New Location for telephony will be set automatically.
n
When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem’s current region
setting.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-37
Operating Basics
Properties menu
Click the icon with the secondary mouse button to display properties menu on the
screen.
Settings
You can enable or disable the following settings:
AutoRun Mode
The Region Select utility starts automatically when you start up the operating
system.
Open the Dialling Properties dialog box after
selecting region.
The dialing properties dialog box will be displayed automatically after you select
the region.
Location list for region selection.
A submenu appears displaying location information for telephony.
Open dialog box, if the modem and Telephony
Current Location region code do not match.
A warning dialog box is displayed if current settings for region code and telephony
location are incorrect.
Modem Selection
If the computer cannot recognize the internal modem, a dialog box is displayed.
Select the COM port for your modem to use.
Dialing Properties
Select this item to display the dialing properties.
If you are using the computer in Japan, the Telecommunications Business Law
requires that you select Japan region mode. It is illegal to use the modem in
Japan with any other selection.
4-38
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Connecting
To connect the modem cable, follow the steps below.
n
The modular cable that comes with the computer must be used to connect
a modem. Connect the end of the modular cable with the core to the
computer.
n
n
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Connecting the internal modem
Do not pull on the cable or move the computer while the cable is connected.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. In the same way, pull the cable’s other connector out of the computer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-39
Operating Basics
Wireless communications
The computer’s wireless communication function supports both Wireless LAN and
Bluetooth devices.
Only some models are equipped with both Wireless LAN and Bluetooth functions.
n
n
Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near
a microwave oven or in areas subject to radio interference or magnetic
fields. Interference from a microwave oven or other source can disrupt
Wi-Fi or Bluetooth operation.
Turn Wi-Fi and Bluetooth functionalities off when near a person who
may have a cardiac pacemaker implant or other medical electric device.
Radio waves may affect pacemaker or medical device operation, possibly
resulting in serious injury. Follow the instruction of your medical device
when using any Wi-Fi or Bluetooth functionality.
n
n
Always turn off Wi-Fi or Bluetooth functionality if the computer is near
automatic control equipment or appliances such as automatic doors or
fire detectors. Radio waves can cause malfunction of such equipment,
possibly resulting in serious injury.
It may not be possible to make a network connection to a specified
network name using the ad hoc network function. If this occurs, the new
network(*) will have to be configured for all computers connected to the
same network in order to re-enable network connections.
* Please be sure to use new network name.
Wireless LAN
The Wireless LAN feature is not available on all models. Where present, it
supports the A,B, G and draft N standards but it is compatible with other LAN
systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency
Division Multiplexing radio technology that complies with IEEE802.11 Wireless
LAN standard.
n
n
n
Automatic Transmit Rate Select mechanism in the transmit range of 54, 48,
36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.11a/g)
Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2
and 1 Mbit/s. (IEEE 802.11b)
Roaming over multiple channels
4-40
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
n
n
Card Power Management
Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit
encryption algorithm.
n
Advanced Encryption Standard (AES) data encryption, based on 128 bit
encryption algorithm.
Security
n
Be sure to enable the encryption function otherwise you may expose your
computer to illegal access by an outsider across the Wireless LAN which
may cause intrusion, eavesdropping, and the loss or destruction of stored
data. TOSHIBA strongly recommend the customer to enable the encryption
function.
n
TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless
LAN and the damage thereof.
Bluetooth Stack for Windows by TOSHIBA
(depends on the model purchased)
Please note that this software is specifically designed for the following operating
systems:
n
Microsoft® Windows Vista™
Detailed information regarding the use with these operating systems is listed
below. Please refer also to the electronic information which is included with
each software.
This Bluetooth Stack is based on Bluetooth Version 1.1/1.2/2.0/2.1+EDR
specification. TOSHIBA cannot confirm compatibility between any PC products
and/or other electronic devices that use Bluetooth other than TOSHIBA
notebook computers.
Release Notes related to the Bluetooth Stack for
Windows by TOSHIBA
1. Fax application software:
Regarding FAX application software, there are some software that you cannot
use on this Bluetooth Stack.
2. Multi User:
On Windows Vista™, the use of Bluetooth is not supported in a multiuser
environment. This means that, when you use Bluetooth, other users logged
onto the same computer will not be able to use its Bluetooth functionality.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-41
Operating Basics
Product Support
The latest information regarding Operating System support, Language Support
or available upgrades can be found on our web site http://www.toshiba-europe.
com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the
United States.
Wireless communication switch
You can enable or disable the Wireless LAN function, with the on/off switch. No
transmissions are sent or received when the switch is off. Slid the Switch to turn it
on and turn it off.
Set the switch to off in airplanes and hospitals. Check the indicator. It will stop
glowing when the wireless communication function is off.
Wireless activity LED
The wireless activity LED indicates the status of the wireless communication
functions.
Indicator status
Indication
LED off
Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction.
LED glows
Wireless communication switch is on. Wireless
LAN is turned on by an application.
If you used the Task Bar to disable Wireless LAN, you will need to restart the
computer to re-enable it. Alternatively, you can also follow this procedure:
1. In the Control Panel, click System and Maintenance.
2. Click the Device Manager. The Device Manager window opens. Click Network
adaptors.
3. Select your preferred Network adaptor, then click the Enable button in the tool
bar.
LAN
The computer has built-in support for Fast Ethernet LAN (10 megabits per second,
10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and
Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).
This section describes how to connect disconnect to a LAN.
Do not install or remove a memory module while Wake-up on LAN is enabled.
4-42
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
n
n
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
The Link speed (10/100/1000 megabits per second) changes
automatically depending on the network conditions (connected device,
cable or nose and so on).
LAN cable types
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer’s default settings could cause a
malfunction in LAN operation. Check with your LAN administrator regarding
set-up procedures.
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be
sure to connect with a CAT5 cable or higher. You cannot use a CAT3 cable.
If you are using Giga bit Ethernet LAN, be sure to connect with a CAT5-E cable or
higher. You cannot use a CAT5 or a CAT3 cable.
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can
connect with a CAT3 or higher cable.
Connecting LAN cable
To connect the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices connected to
the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you hear the
latch click into place.
Connecting the LAN cable
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-43
Operating Basics
3. Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer’s LAN jack and pull out the
connector.
2. Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.
Cleaning the computer
To help ensure long, trouble-free operation, keep the computer free of dust and
use care with liquids around the computer.
n
Be careful not to spill liquids into the computer. If the computer does get wet,
turn the power off immediately and let the computer dry completely before you
turn it on again.
n
Clean the computer using a slightly damp (with water) cloth. You can use
glass cleaner on the display. Spray a small amount of cleaner on a soft, clean
cloth and wipe the screen gently with the cloth.
Never spray cleaner directly onto the computer or let liquid run into any part of
it. Never use harsh or caustic chemical products to clean the computer.
n
Remove the dust from the cooling vents on the Left side of the computer
side.
Moving the computer
The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.
n
Before moving the computer, it recommends changing the function of
TOSHIBA HDD Protection. Refer to the section, Using the Hard Disk Drive
(HDD) Protection, in this chapter.
n
n
Make sure all disk activity has ended before moving the computer. Check the
HDD indicator on the computer.
If a CD/DVD is in the drive, remove it. Also make sure the disc tray is securely
closed.
4-44
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
n
n
n
n
Turn off (shut down) the computer.
Disconnect the AC adaptor and all peripherals before moving the computer.
Close the LCD display panel. Do not pick up the computer by its display panel
Before carrying your computer, shut down the computer, disconnect the power
cable and wait until the PC cools down. Failure to follow this instruction could
result in minor injury.
n
Always turn off the power when you move the computer. If the power button
has a lock, set it to the lock position. Also be careful not to subject the
computer to impact. Failure to follow this instruction could result in damage to
computer, computer failure or loss of data.
n
Never transport your computer with PC cards installed. This could cause
damage to your computer and/or PC card, resulting in product failure.
n
n
Use the carrying case when transporting the computer.
When carrying your computer, be sure to hold it securely so that it does not
fall or hit anything.
n
Do not carry your computer by holding protruded portions.
Using the Hard Disk Drive (HDD) Protection
This computer has a function for reducing the risk of damage on the hard disk
drive.
Using an acceleration sensor built into the computer, TOSHIBA HDD Protection
detects vibration shocks and similar signs of movement of the computer, and
automatically moves the Hard Disk Drive head to a safe position to reduce the risk
of damage that could be caused by head-to-disk contact.
The TOSHIBA HDD Protection function does not guarantee that the hard disk
drive will not be damaged.
When vibration is detected, a message will be displayed on the screen, and the
icon in the Taskbar notification area will changed to the protection state. This
message is displayed until the OK button is pressed or 30 seconds pass. When
vibration subsides, the icon returns to the normal state.
Taskbar icon
State
Icon
Description
Normal
TOSHIBA HDD Protection is enabled.
Protection
OFF
TOSHIBA HDD Protection is active. The hard
disk drive head is in a safe position
TOSHIBA HDD Protection is disabled.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-45
Operating Basics
TOSHIBA HDD Protection Properties
You can change the TOSHIBA HDD Protection settings by using the TOSHIBA
HDD Protection window. To open the window, click Start All Programs
TOSHIBA HDD Protection Settings. The window can also be started from
the icon on the Taskbar or from the Control Panel.
HDD Protection
You can choose whether to enable or disable TOSHIBA HDD Protection.
Detection Level
This function can be set to four levels. The sensitivity levels in which vibrations,
impacts and their similar signs are detected can be set to OFF, 1, 2 and 3 in
ascending order. Level 3 is recommended for better protection of the computer.
However, when the computer is used in a mobile environment or in other unstable
conditions, setting the detection level to 3 could result in frequent execution of
TOSHIBA HDD Protection, which will slow Hard Disk Drive reading and writing.
Set a lower detection level when the speed of Hard Disk Drive reading and writing
is a priority.
Different detection levels can be set depending on whether the computer is used
as handheld or mobile usages, or whether it is used in a stable environment such
as on a table in the workplace or at home. By setting different detection levels for
the computer depending on whether it runs with the AC power (desktop) or with
batteries (handheld or mobile usage), the detection level automatically switches
according to the power connection mode.
3D Viewer
This feature displays a 3D object on the screen which moves in according to
tilting or vibration of the computer. When the TOSHIBA HDD Protection detects
computer vibration the Hard Disk Drive head is parked and the 3D object disk
rotation will stop. When the head is un-parked the disk will begin to rotate again.
The 3D Viewer can be started from the icon in the task tray.
n
n
n
This 3D object virtually represents the Computer’s internal Hard Disk Drive.
This representation may vary from the actual number of disks, disk rotation,
head movement, part size, shape and direction.
This feature may use a large amount of CPU and memory on some models.
The computer may become slow or sluggish when attempting to run other
applications while the 3D Viewer is displayed.
Intensely shaking the computer or other subjecting it to strong impacts may
cause damage to the computer.
4-46
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
Details
To open the Details window, click the Setup Detail button in the TOSHIBA HDD
Protection Properties window.
Detection Level Amplification
When the AC adaptor is disconnected or the lid is closed, HDD Detection
assumes that the computer will be carried and sets the detection level to the
maximum for 10 seconds.
TOSHIBA HDD Protection Message
Specify whether to display a message when TOSHIBA HDD Protection is active.
This function does not work when the computer is starting, in sleep mode,
in hibernation mode, in transition to hibernation mode, recovering from
hibernation mode, or power off. Be sure to not subject the computer to
vibration or impact while the function is disabled.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-47
Operating Basics
4-48
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 5
The Keyboard
The computer’s keyboard layouts are compatible with a 101/102-key enhanced
keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard
functions can be executed on the computer.
The number of keys on your keyboard depends on which country/region’s
keyboard layout your computer is configured with. Keyboards for numerous
languages are available.
There are six types of keys: typewriter keys, keypad overlay, function keys, soft
keys, Windows® special keys, and cursor control keys.
Typewriter keys
The typewriter keys produce the upper- and lower-case letters, numbers,
punctuation marks, and special symbols that appear on the screen.
There are some differences, however, between using a typewriter and using a
computer keyboard:
n
Letters and numbers produced in computer text vary in width. Spaces,
which are created by a “space character,” may also vary depending on line
justification and other factors.
n
The lowercase l (el) and the number 1 (one) are not interchangeable on
computers as they are on a typewriter.
n
n
The uppercase O (oh) and the 0 (zero) are not interchangeable.
The Caps Lock function key locks only the alphabetic characters in
uppercase while the shift lock on a typewriter places all keys in the shifted
position.
n
The Shift keys, the Tab key, and the BackSpace key perform the same
function as their typewriter counterparts but also have special computer
functions.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-1
The Keyboard
F1 ... F12 function keys
The function keys (not to be confused with Fn) are the 12 keys at the top of your
keyboard. These keys function differently from other keys.
F1 through F12 are called function keys because they execute programmed
functions when pressed. Used in combination with the Fn key, keys marked with
icons execute specific functions on the computer. Refer to the section, Soft keys:
Fn key combinations, in this chapter. The function executed by individual keys
depends on the software you are using.
Soft keys: Fn key combinations
The Fn (function) is used in combination with other keys to form soft keys. Soft
keys are key combinations that enable, disable or configure specific features.
Some software may disable or interfere with soft-key operations. Soft-key
settings are not restored by the Sleep Mode feature.
Emulating keys on enhanced keyboard
PRTSC
SYSRQ
PAUSE
BREAK
DEL
INS
BACK
HOME
PGUP
PGDN
END
SPACE
CAPS
LOCK
ENTER
SHIFT
SHIFT
FN
ALT
CTRL
ALT
CTRL
A 101-key enhanced keyboard layout
The keyboard is designed to provide all the features of the 101-key enhanced
keyboard, shown in figure above. The 101/102-key enhanced keyboard has a
numeric keypad and scroll lock key. It also has additional Enter and Ctrl keys to
the right of the main keyboard. Since the keyboard is smaller and has fewer keys,
some of the enhanced keyboard functions must be simulated using two keys
instead of one on the larger keyboard.
Your software may require you to use keys that the keyboard does not have.
Pressing the Fn key and one of the following keys simulates the enhanced
keyboard’s functions.
5-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Keyboard
Press Fn + F11 to access the integrated keypad. When activated, the keys with
gray markings on the bottom edge become numeric keypad keys. Refer to the
Keypad overlay section in this chapter for more information on how to operate
these keys. The power on default for both settings is off. Press Fn + F12 to lock
the cursor on a specific line. The power on default is off.
Hot keys
+
Mute: Turns the volume on and off.
+
Lock: Enters “Lock computer” mode. To restore your desktop, you need to log on
again.
+
Power plan: Displays the power save modes and lets you change the power
settings.
+
Sleep: This hot key switches the system to Sleep Mode.
+
Hibernate: This hot key switches the system to Hibernate mode.
+
Output: Changes the active display device.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-3
The Keyboard
+
Brightness (decreases): Turns the monitor brightness down.
+
Brightness (increases): Turns the monitor brightness up.
+
Wireless: Switches the active wireless devices if the wireless communication
switch is switched on.
+
TouchPad: Enables or disables the Touch Pad function.
+
Enable Keypad: Enables or disables the Key Pad function.
+
Number Lock: Enables or disables the Number Lock function.
+
Scroll Lock: Enables or disables the Scroll Lock function.
+
Zoom: Changes the display resolution.
+
TOSHIBA Zooming Utility (reduce): Reduces the icon size on the desktop or the
font size within one of the supported application windows.
5-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Keyboard
+
TOSHIBA Zooming Utility (enlarge): Increases the icon size on the desktop or
the font size within one of the supported application windows.
Before using Fn+1 and Fn+2, you must install the TOSHIBA Zooming Utility.
The Utility only supports the following application windows: Microsoft Internet
Explorer, Microsoft Office, Windows Media Player, Adobe Reader and the
icons on the desktop.
+
Keyboard Backlight (On/Off)*: Turns the backlight of the keyboard on and off.
* This function is provided with some models.
Fn Sticky key (Depends on the model you
purchased)
You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that
is, you can press it once, release it, and then press an “F number” key. To start
the TOSHIBA Accessibility Utility, click Start, point to All Programs, point to
TOSHIBA, point to Utilities and click Accessibility.
Windows® special keys
The keyboard provides two keys that have special functions in Windows® :
Windows® logo key activates the start menu and the other, the application key, has
the same function as the secondary mouse button.
This key activates the Windows® start menu.
This key has the same function as the secondary mouse button.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-5
The Keyboard
Keypad overlay
Your computer’s keyboard does not have an independent numeric keypad, but its
numeric keypad overlay functions like one.
The keys in the centre of the keyboard with gray letters make up the numeric
keypad overlay. The overlay provides the same functions as the numeric keypad
on the 101/102-key enhanced keyboard described previously.
Turning on the overlays
The numeric keypad overlay can be used for numeric data input.
Numeric mode
To turn on the Numeric mode, press Fn + F11. Now try numeric data entry using
the keys in the following figure. Press Fn + F11 again to turn off the overlay.
PRTSC
SYSRQ
PAUSE
BREAK
DEL
INS
BACK
HOME
PGUP
PGDN
END
SPACE
CAPS
LOCK
ENTER
SHIFT
SHIFT
FN
ALT
CTRL
ALT
CTRL
The numeric keypad overlay
5-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Keyboard
Temporarily using normal keyboard (overlay on)
While using the overlay, you can temporarily access the normal keyboard without
turning off the overlay:
1. Hold Fn and press any other key. All keys will operate as if the overlay were
off.
2. Type upper-case characters by holding Fn + Shift and pressing a character
key.
3. Release Fn to continue using the overlay.
Generating ASCII characters
Not all ASCII characters can be generated using normal keyboard operation. But,
you can generate these characters using their ASCII codes.
With the overlay on:
1
Hold down Alt.
2. Using the overlay keys, type the ASCII code.
3. Release Alt, and the ASCII character appears on the display screen.
With the overlay off:
1. Hold down Alt + Fn.
2. Using the overlay keys, type the ASCII code.
3. Release Alt + Fn, and the ASCII character appears on the display screen.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-7
The Keyboard
5-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 6
Power and Power-Up Modes
The computer’s power resources include the AC adaptor and internal batteries.
This chapter gives details on making the most effective use of these resources
including charging and changing batteries, tips for saving battery power, and
power up modes.
Power conditions
The computer’s operating capability and battery charge status are affected by
the power conditions: whether an AC adaptor is connected, whether a battery is
installed, and what the charge level is for the battery.
Table Power conditions
Power On
Power off
(no operation)
AC adaptor Battery fully
• Operates
• LED: Battery white
connected
charged
• LED: Battery white
Battery partially • Operates
charged or no
• Quick charge
• Quick Charge
• LED: Battery orange
charge
• LED: Battery orange
• Operates
No battery
installed
• No charge
• No charge
• LED: Battery off
• LED: Battery off
User’s Manual
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Power and Power-Up Modes
Table Power conditions
Power On
Power off
(no operation)
Universal AC Battery charge is
• Operates
adaptor not
connected
above low battery
trigger point
• LED: Battery off
Battery charge is
below low battery
trigger point
• Operates
• LED: Battery flashes orange
Battery charge is
exhausted
Computer shuts down
No Battery installed • Cannot operates
• LED: Battery off
Power indicators
As shown in the above table, the Battery Power indicators on the system
indicator alert you to the computer’s operating capability and battery charge
status.
Battery indicator
Check the Battery indicator to determine the status of the battery pack. The
following indicator lights indicate the battery status:
Flashing orange
Orange
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Indicates the AC adaptor is connected and
charging the battery.
White
Indicates the AC adaptor is connected and the
battery is fully charged.
No light
Under any other conditions, the indicator does not
light.
If the battery becomes too hot while it is being charged, the charge will stop
and the battery indicator will go out. When the battery’s temperature falls to a
normal range, charge will resume. This occurs whether the computer’s power
is on or off.
6-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Power and Power-Up Modes
Power indicator
Check the Power indicator to determine the power status:
White
Indicates power is being supplied to the computer
and the computer is turned on.
Blinking orange
Indicates power is being supplied to the computer
while the computer is in Sleep Mode. The
indicator turns on for one second and off for two
seconds.
No light
Under any other conditions, the indicator does not
light.
Battery types
The computer has the following batteries:
n
n
Battery pack ( 6cell or 12cell depending on the model.)
Real Time Clock (RTC) battery
n
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
n
Do not remove the battery pack while the computer is in Sleep Mode.
Data is stored in RAM, so if the computer loses power it will be lost. When
the computer is powered off in Sleep Mode, and the AC adaptor is not
connected, the main battery pack supplies power to maintain data and
programs in memory. If the battery pack is completely discharged, Sleep
Mode does not function and the computer loses all data in memory.
Battery pack
When the AC adaptor is not connected, the computer’s main power source is a
removable lithium ion battery pack, also referred to in this manual as the main
battery. You can purchase additional battery packs for extended use of the
computer away from an AC power source.
Before you remove the battery pack, set the computer to Hibernation Mode or
save your data and shut down the computer. Do not change the battery pack while
the AC adaptor is connected.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6-3
Power and Power-Up Modes
Battery pack
To ensure that the battery pack maintains its maximum capacity, operate the
computer on battery power at least once a month until the battery pack is fully
computer is continuously operated on AC power through an AC adaptor for an
extended period, more than a month, the battery may fail to retain a charge. It
may not function efficiently over the expected life of the battery and the Battery
indicator may not indicate a low-battery condition.
Real Time Clock battery
The Real Time Clock (RTC) battery provides power for the internal real time clock
and calendar. It also maintains the system configuration.
If the RTC battery becomes completely discharged, the system loses this data and
the real time clock and calendar stop working.
The computer’s RTC battery is a lithium ion battery and should be replaced
only by your dealer or by a TOSHIBA service representative. The battery can
explode if not properly replaced, used, handled or disposed of. Dispose of the
battery as required by local ordinances or regulations
n
n
You can change the settings of the Real Time Clock by pressing F2 in
POST.
After configuring the time and date for the Real Time Clock battery, we
recommend that you turn the power status of your computer to “ON”
so that the Real Time Clock battery is charged. Refer to Chapter 9
Troubleshooting, for details.
If the following message is displayed on the LCD:
ERROR 0271: Check date and time settings.
WARNING 0251: System CMOS checksum bad-Default
configuration used.
Press [F1] to resume, [F2] to setup.
6-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Power and Power-Up Modes
The charge in the RTC battery is getting low or has been exhausted. You will need
to set the date and time within the BIOS setup using the following steps:
1. Press F2 key - the BIOS setup screen will be displayed.
2. Set the date in System Date.
3. Set the time in System Time.
4. Press F10 key. Confirmation message will appear.
Press Enter key. BIOS setup will terminate and the computer will be rebooted.
After configuring the date and time it is recommended that you switch the
computer on and then leave it in this state so that the Real Time Clock battery
can be charged.
Care and use of the battery pack
This section provides the important safety precautions in order to handle your
battery pack properly.
Refer to the enclosed Instruction Manual for Safety and Comfort for detailed
precautions and handling instructions.
n
n
Make sure the battery is securely installed in the computer before
attempting to charge the battery pack. Improper installation could
generate smoke or fire, or cause the battery pack to rupture.
Keep the battery pack out of reach of infants and children. It can cause
injury.
n
n
n
The battery pack is lithium ion battery, which can explode if not replaced,
used, handled or disposed of properly. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
Charge the battery pack only in an ambient temperature between 5
and 35 degrees Celsius. Otherwise, the electrolyte solution might leak,
battery pack performance might deteriorate and the battery life might be
shortened.
Never install or remove the battery pack without first turning off the power
and disconnecting the AC adaptor. Never remove the battery pack while
the computer is in Sleep Mode. Data could be lost.
Never remove the battery pack while the Wake-up on LAN function is
enabled. Data will be lost. Before you remove a battery pack, disable the
Wake-up on LAN function.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6-5
Power and Power-Up Modes
Charging the batteries
When the power in the battery pack becomes low, the Battery indicator flashes
orange indicating that only a few minutes of battery power remain. If you continue
to use the computer while the Battery indicator flashes, the computer enables
Hibernation Mode (so you don’t lose data) and automatically turns off.
You must recharge a battery pack when it becomes discharged.
Procedures
To recharge a battery pack while it is installed in the computer, connect the AC
adaptor to the DC IN 19V jack and plug the other end into a working outlet.
The Battery indicator glows orange when the battery is being charged.
Use only the computer connected to an AC power source to charge the battery
pack. Never attempt to charge the battery pack with any other charger.
Time
The following table shows the approximate time required to fully charge a
discharged battery.
Charging time (hours)
Battery type
Power on
Power off
Battery pack
(6cell, 12cell)
4-10 hours
4 hours max
RTC Battery
About 24 hours
About 24 hours
The charging time when the computer is on is affected by ambient
temperature, the temperature of the computer and how you use the computer.
If you make heavy use of external devices, for example, the battery might
scarcely charge at all during operation. Refer also to the section Maximizing
Battery charging notice
The battery may not charge right away under the following conditions:
n
n
The battery is extremely hot or cold. If the battery is extremely hot, it might
not charge at all. To ensure the battery charges to its full capacity, charge the
battery at room temperature of 10° to 30°C (50° to 88°F).
The battery is nearly completely discharged. Leave the AC adaptor connected
for a few minutes and the battery should begin charging.
6-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Power and Power-Up Modes
The Battery indicator may show a rapid decrease in battery operating time when
you try to charge a battery under the following conditions:
n
n
The battery has not been used for a long time.
The battery has completely discharged and been left in the computer for a
long time.
n
A cool battery is installed in a warm computer.
In such case, follow the steps below.
1. Fully discharge the battery by leaving it in the computer with the power on until
the power automatically shuts off.
2. Plug in the AC adaptor.
3. Charge the battery until the Battery indicator glows blue.
Repeat these steps two or three times until the battery recovers normal capacity.
Leaving the AC adaptor connected will shorten battery life. At least once a
month, run the computer on battery power until the battery is fully discharged,
then recharge the battery.
Monitoring battery capacity
Remaining battery power can be monitored using the following methods.
n
n
Clicking the battery icon on the task bar
Via the Windows Mobility Center window
n
Wait at least 16 seconds after turning on the computer before trying to
monitor the remaining operating time. The computer needs this time to
check the battery’s remaining capacity and to calculate the remaining
operating time, based on the current power consumption rate and
remaining battery capacity. The actual remaining operating time may differ
slightly from the calculated time.
n
With repeated discharges and recharges, the battery’s capacity will
gradually decrease. Therefore, an often used, older battery will not
operate for as long as a new battery even when both are fully charged.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6-7
Power and Power-Up Modes
Maximizing battery operating time
A battery’s usefulness depends on how long it can supply power on a single
charge. How long the charge lasts in a battery depends on:
n
n
n
n
n
n
n
n
n
CPU processing speed (Depends on the model you purchased)
Screen brightness
Cooling method (Depends on the model you purchased)
System Sleep Mode
System Hibernation
Monitor power off
How often and how long you use the hard disk, optical disc.
How much charge the battery contained to begin with.
How you use optional devices, such as a PC Card, to which the battery
supplies power.
n
Enabling Sleep Mode conserves battery power if you are frequently turning
the computer off and on.
n
n
n
n
Where you store your programs and data.
Closing the display when you are not using the keyboard saves power.
Operating time decreases at low temperatures.
The condition of the battery terminals. Make sure the battery terminals stay
clean by wiping them with a clean dry cloth before installing the battery pack.
Retaining data with power off
When you turn off your computer with fully charged batteries, the batteries retain
data for the following approximate time periods.
Battery pack
(6cell, 12cell)
Approximately 2 days
(Sleep mode, 6cell)
Approximately 4 days
(Sleep mode, 12cell)
Approximately 5 days
(Shutdown mode, 6cell)
Approximately 10 days
(Shutdown mode, 12cell)
RTC battery
Approximately 3 months
6-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Power and Power-Up Modes
Extending battery life
To maximize the life of your battery pack:
n
At least once a month, disconnect the computer from a power source and
operate it on battery power until the battery pack fully discharges. Before
doing so, follow the steps below.
1. Turn off the computer’s power.
2. Disconnect the AC adaptor and turn on the computer’s power. If it does not
turn on go to step 4.
3. Operate the computer on battery power for five minutes. If the battery pack
has at least five minutes of operating time, continue operating until the battery
pack is fully discharged. If the Battery indicator flashes or there is some other
warning to indicate a low battery, go to step 4.
4. Connect the AC adaptor to the computer and the power cord to a power outlet.
The Battery indicator should glow orange to indicate that the battery pack
is being charged. If the Battery indicator does not glow, power is not being
supplied. Check the connections for the AC adaptor and power cord.
5. Charge the battery pack until the Battery indicator glows white.
n
n
If you have extra battery packs, rotate their use.
If you will not be using the system for an extended period, more than one
month, remove the battery pack.
n
Store spare battery packs in a cool dry place out of direct sunlight.
Replacing the battery pack
When the battery pack reaches the end of its operating life you will need to install
a new one. The life of the battery pack is generally about 500 recharges. If the
Battery indicator flashes orange shortly after fully recharging the battery, the
battery pack needs to be replaced.
You might also replace a discharged battery pack with a charged spare when
you are operating your computer away from an AC power source. This section
explains how to remove and install the battery pack.
Removing the battery pack
To replace a discharged battery, follow the steps below.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6-9
Power and Power-Up Modes
n
When handling battery packs, do not short-circuit the terminals. Also do
not drop, hit or otherwise apply impact; do not scratch or break the casing
and do not twist or bend the battery pack.
n
n
Do not remove the battery pack while the computer is in Sleep Mode.
Data is stored in RAM, so if the computer loses power it will be lost.
In Hibernation Mode, data will be lost if you remove the battery or
disconnect the AC adaptor before the save is completed. Wait for the
Built-in HDD indicator to go out.
n
Do not touch the latch while holding the computer. Or you may get injured
by the dropped battery by unintentional release of the latch.
1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Turn the computer upside down.
5. Slide and hold the battery release latch to free the battery pack after moving
the battery pack lock into its unlock position - then slide the battery pack out of
the computer.
2
3
1
Releasing the battery pack
1. Battery Pack Lock
2. Battery Pack
3. Battery Release Latch
6-10
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Power and Power-Up Modes
Installing the battery pack
To install a battery, follow the steps below.
n
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
n
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Insert the battery pack.
4. Ensure the battery pack lock is moved into its locked position.
2
1
Securing the battery pack
1.
Battery Pack Lock
2.
Battery Pack
Starting the computer by password
To start up the computer with the user password, follow these steps:
message appears:
Password=
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6-11
Power and Power-Up Modes
2. Enter the password.
3. Press Enter.
If you enter the password incorrectly three times in a row, the computer shuts
off. In this case, you must turn the computer back on to retry password entry.
or if available
Swipe your fingerprint on the sensor if you have already registered the fingerprint
with the Fingerprint utility and enabled Fingerprint Power on Security. If you
would not like to swipe your finger or cannot authenticate the fingerprint for some
reasons, push the BkSp key to skip the fingerprint authentication screen. You can
try to swipe the fingerprint up to five times. If you failed fingerprint authentication
more than five times, you must enter the password manually to start the computer.
Power-up modes
The computer has the following power-up modes:
n
Boot Mode: Computer shuts down without saving data. Always save your work
before you turn the computer off in boot mode.
n
n
Hibernation Mode: Data in memory is saved to the hard disk.
Sleep Mode: Data is maintained in the computer’s main memory.
Hot keys
You can use hot keys Fn + F3 to enter Sleep Mode and Fn + F4 to enter
Panel power off/on
You can set up your computer so that power turns off automatically when you
close the display panel. When you open the panel, power turns on in Sleep Mode
or Hibernation Mode but not in boot mode.
If the panel power off function is enabled and you use Shut down Windows®,
do not close the display until the shut down function is completed.
System Auto Off
This feature turns the system off automatically if it is not used for a set duration.
The system shuts down in Sleep Mode or Hibernation Mode in Windows®.
6-12
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 7
HW Setup
This chapter explains how to use TOSHIBA HW Setup program to configure your
computer. TOSHIBA HW Setup lets you configure settings for General, Password,
Display, Boot Priority, Keyboard, LAN, and USB.
Accessing HW Setup
To run HW Setup, click
, All Programs, TOSHIBA, Utilities, HWSetup.
HW Setup Window
The HW Setup window contains the following tabs: General, Password, Display,
Boot Priority, Keyboard, USB and LAN . There are also these three buttons:
OK
Accepts your changes and closes the HW Setup
window.
Cancel
Apply
Closes the window without accepting your changes.
Accepts all your changes without closing the HW
Setup window.
General
This window displays the BIOS version and contains two buttons:
Default
About
Return all HW Setup values to the factory settings.
Display the HW Setup version.
Setup
This field displays BIOS Version and date.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-1
HW Setup
Password
This tab allows you to set or reset the user password for power on.
User Password
Lets you register a new password or un-register an existing password.
Not Registered
Registered
Un-registers an existing password
Register a new password by following the on screen
instructions
Owner String
This blank field is used to display a message when the password field is displayed
on startup. If a password is not registered the message will not be shown. The
maximum length is 256 characters.
Display
This tab lets you select the internal LCD and/or external monitor when the
computer boots up.
Power On Display
Lets you select the display to be used when the computer is booted (This setting
is only available on Standard VGA mode and not available on Windows® Desktop).
Auto-Selected
If any external display is connected, the power
on display will be in external display only mode.
otherwise it will be in LCD only mode.
System LCD only
Irrespective of external display connection, the power
on display will be in integrated LCD only mode.
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer.
To select the boot drive you want, follow the steps below.
1. Boot-up your computer and press F12 to enter the boot menu.
2. The boot select screen will be displayed: Hard disk Drive, CD/DVD, FDD and
LAN.
3. Use the upper/lower cursor keys to highlight the boot device you want and
apply.
7-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
HW Setup
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep Mode, you can turn on
the computer by pressing any key. It is effective only for the internal keyboard and
only when the computer is in Sleep Mode.
Enabled
Disabled
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function
(Default).
USB
Legacy USB Support
Use this option to enable or disable Legacy USB support. If your operating system
does not support USB, you can still use a USB mouse, keyboard, and FDD by
setting the Legacy USB Support to enable.
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN.
Regarding Wake-up on LAN from Sleep or Hibernation mode, you must check
the “Allow the device to wake the computer” checkbox within the LAN Device
properties.
(This feature does not affect the Wake-up on LAN from Sleep or Hibernation
mode.)
Enabled
Disabled
Enables Wake-up on LAN
Disables Wake-up on LAN (Default).
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
Enables Built-in LAN function (Default).
Disables Built-in LAN function.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-3
HW Setup
Illumination
Illumination ON/OFF
This feature allows you to set the conditions around the illumination LED.
On
Off
On (Default).
Off.
Keyboard Backlight
This feature allows you to set the conditions around the keyboard backlight LED.
Auto
Keyboard backlight will be on when hit any key.
After [Backlight Lighting Time], backlight will be off.
[Backlight Lighting Time] is 15 sec by default.
On
On. (Pressing FN + Z or FN + z switches the
keyboard backlight on or off.)
OFF
Off. (Pressing FN + Z or FN + z switches the
keyboard backlight on or off.)
Button Setting
Function Button
This feature allows you to set the conditions for the power button and/or other
buttons.
Enabled
Disabled
Enable the function button (Default).
Disable the function button.
7-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 8
Optional Devices
Optional devices can expand the computer’s capabilities and its versatility. This
chapter describes connection or installation of the following devices, which are
available from your TOSHIBA dealer:
Cards/memory
n
n
ExpressCard
SD (Secure Digital) / SDHC (Secure Digital High Capacity) / MMC (Multi
Media Card) / MEMORY STICK / MEMORY STICK PRO / xD (xDPicture
Card) cards
n
Memory expansion
Power devices
n
n
Additional battery pack
Additional AC adaptor
Peripheral devices
n
External monitor
Other
n
Security lock
User’s Manual
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
ExpressCard Slot
The computer is equipped with an ExpressCard slot that can accommodate one
ExpressCard.
Inserting an ExpressCard
One ExpressCard connector is located on the left side of the computer. The
computer’s hot-install feature lets you install ExpressCard while the computer’s
power is on.
To install an ExpressCard, follow the steps below.
1. Insert the ExpressCard.
2. Press gently to ensure a firm connection.
Windows® hot-install feature lets you insert an ExpressCard while the computer’s
power is on.
Inserting the ExpressCard
After inserting the card, refer to the card’s documentation and check the
configuration in Windows® to make sure it is appropriate for your card.
8-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
Removing an ExpressCard
n
n
Before removing an ExpressCard, make sure that any applications or
system services do not use the card.
Be sure to disable the ExpressCard prior to removing it. Otherwise, the
system may be fatally damaged.
To remove the ExpressCard, follow the steps below.
1. Click the Safety Remove Hardware icon on the Task Bar.
2. Click the ExpressCard you want to remove.
3. Press the ExpressCard once to extend it.
4. Grasp the extended ExpressCard, and remove it.
Removing the ExpressCard
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-3
Optional Devices
SD/SDHC/MMC/MEMORY STICK / MEMORY STICK
PRO/xD Memory cards
The computer is equipped with a multiple digital media card slot that can
accommodate SD/SDHC/MMC/MEMORY STICK/ MEMORY STICK PRO/xD
memory cards. These memory cards let you easily transfer data from devices,
such as digital cameras and Personal Digital Assistants, which use flash-memory.
Card Type
Capacities
SD
up to 2GB
SDHC
up to 16GB
MMC
up to 2GB
MEMORY STICK
MEMORY STICK PRO
xD
up to 128MB, 256MB (128MB x 2)
up to 4GB
up to 2GB
Keep foreign objects out of the memory card slot. A pin or similar object can
damage the computer’s circuitry.
Do not format a memory card with Windows® as it might result in that card not
being able to be used with some peripheral devices.
Do not insert Memory Stick Duo/PRO Duo into the slot without the MEMORY
STICK adapter. Data may be lost or damaged if you use any card other than
those supported.
The card is designed so that it can be inserted only one way. Do not try to
force the card into the slot.
For more details on using memory cards, see manuals accompanying the
cards.
The Logo of SD memory card is
.
The Logo of SDHC memory card is
.
8-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
Installing a memory card
To install a memory card:
1. Insert the memory card.
2. Press gently to ensure a firm connection.
Inserting a memory card
Be sure the memory card is oriented properly before you insert it. If Windows®
fails to read the card, remove it then re-insert it.
The multiple digital media card slot only accepts one type of card at a time. Do
not attempt to install more than one card as you risk damaging either the cards
themselves or the computer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-5
Optional Devices
Removing a memory card
To remove a memory card, follow the steps below:
1. Click the Safely Remove Hardware icon on the Taskbar.
2. Select a device, then click the Stop button. A confirmation dialog may appear,
depending on how the device is registered with the system; if so, confirm that
you want to remove the device.
3. Gently press the memory card inside the socket to eject it.
4. Grasp the card and remove it.
Removing a memory card
n
Make sure the memory card indicator is out before you remove the card or
turn off the computer’s power. If you remove the card or turn off the power
while the computer is accessing the card you may lose data or damage
the card.
n
n
Do not remove the card while the computer is in Sleep or Hibernation
mode. The computer could become unstable or data in the memory card
could be lost.
Do not turn off or place the computer into either Sleep Mode or
Hibernation Mode while data is being transferred to or from the memory
card. The system may become unstable or data in the memory card may
be lost.
8-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
Memory card care
Set the write-protect switch to the lock position, if you do not want to record
data.
1. Do not write to a memory card if the battery power is low. Low power could
affect writing accuracy.
2. Do not remove a memory card while read/write is in progress.
3. The memory card is designed so that it can be inserted only one way. Do not
try to force the card into the slot.
4. Do not leave a memory card partially inserted in the slot. Press the memory
card until you hear it click into place.
5. Do not twist or bend memory cards.
6. Do not expose memory cards to liquids or store in humid areas or lay media
close to containers of liquid.
7. After using a memory card, return it to its case.
8. Do not touch the metal part or expose it to liquids or let it get dirty.
Memory expansion
You can install additional memory in the computer’s memory module socket to
increase the amount of RAM. This section describes how to install and remove a
memory module.
n
n
Use only memory modules approved by TOSHIBA.
Do not try to install or remove a memory module under the following
conditions. You can damage the computer and the module. Also, data will
be lost.
a. The computer is turned on.
b. The computer was shut down using the Sleep Mode or Hibernation Mode.
n
When incorrect memory is inserted, please refer to Memory expansion
n
Expansion memory is a precision electronic component that may be fatally
damaged by static electricity. Since the human body has slight static
electricity, be sure to discharge static electricity from your body before
installing an expansion memory module. To discharge your body’s static
electricity, simply touch any metal close to you with bare hands.
Use a point size 1 Phillips screwdriver to remove and fasten the screws. Use
of an incorrect screwdriver can damage the screw heads.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-7
Optional Devices
Installing a memory module
Follow the steps below to install a memory module.
1. Set the computer to boot mode and turn off the power.
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack (refer to Chapter
4. Loosen the screws securing the memory module cover.
5. Slide your fingernail or a thin object under the cover and lift it off.
Hard Disk
and Mem-
ory Module
Cover
Removing the memory module cover
6. Lift one side of the insulator sheet and fit the module’s connectors into the
computer’s connectors at about a 45 degree angle. Press the module carefully
to ensure a firm connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
Slot A is reserved for main memory. Slot B is for expanded memory. If only one
memory module is installed, use Slot A. Slot A is lower than slot B.
8-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
7. Push the module down so it lies flat. Latches on either side will click into place
to secure the module.
2
1
Installing the memory module
8. Seat the cover and secure it with the screws.
10. Turn the power on and make sure the added memory is recognized. Open
System in the Control Panel and click the General tab.
Points to note about memory module error
If you install a memory module that is not compatible with the computer, the Power
indicator will flash (on for 0.5 seconds, off for 0.5 seconds) in the following ways:
n
n
n
If there is only an error in Slot A: repeatedly flashes orange twice, then blue.
If there is only an error in Slot B: repeatedly flashes orange, then blue twice.
If there is an error in Slot A and in Slot B: repeatedly flashes orange twice,
then blue twice.
In all instances you should shut down the computer and remove the incompatible
module(s)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-9
Optional Devices
Removing a memory module
To remove the memory module, make sure the computer is in boot mode then:
1. Be sure the power is off and all cables are disconnected from thecomputer.
2. Turn the computer upside down and remove the battery and the screws
securing the memory module cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Lift one side of the insulator and push the latches to the outside to release the
module. A spring will force one end of the module up.
5. Grasp the module by the sides and pull it out.
n
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them. Or you will get burnt if you touch any of them.
n
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
2
1
3
Removing the memory module
6. Seat the cover and secure it with screws and replace the battery pack.
8-10
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
Additional battery pack
You can increase the portability of the computer with additional battery packs. If
you’re away from an AC power source and your battery runs low, you can replace
Additional AC adaptor
If you frequently transport the computer between different sites such as your home
and office, purchasing an AC adaptor for each location will reduce the weight and
bulk of your carrying load.
External monitor
An external analog monitor can be connected to the external monitor port on the
computer. The computer supports several video modes. Refer to Appendix B,
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the Windows® Bootup screen (Windows® Logo)
appears on the display device.
However, the Windows® Desktop appears on a display device that you used
last time to shut down your PC, if the display device exists when you turn on the
power.
To change the display settings, press Fn+F5. If you disconnect the monitor before
you turn the computer off, be sure to press Fn+F5 to switch to the internal display.
display setting.
HDMI
A HDMI monitor can be connected to the HDMI out port on the computer. 1080p,
1080i, 720p, 576p and 480p signal formats can be supported. But actual signal
format you can use depends on HDMI monitor. To connect monitor, follow the
steps as detailed below:
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not been confirmed, some HDMI monitors may not function
properly.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-11
Optional Devices
1. Plug one end of the HDMI cable into the HDMI port of the HDMI device.
HDMI
Connecting a HDMI cable
2. Plug the other end of the HDMI cable into the HDMI out port on your
computer.
Setting for display video on HDMI
To view video on the HDMI device, be sure to configure the following settings
otherwise you may find that nothing is displayed.
n
Be Sure to use the FN + F5 hot keys to select the display device before
starting to play video. Do not change the display device while playing
video.
n
n
n
Do not change the display device under the following conditions.
While data is being read or written.
While communication is being carried out.
8-12
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
Settings for audio on HDMI
To set the audio device to use the HDMI, follow the steps below.
1. Click Start.
2. Click Control Panel.
3. Click Hardware and Sound.
4. Click Sound.
5. Click Digital Output Device (HDMI).
6. Click the Set Default Device button.
To set the audio device to use internal speaker, follow the steps below.
1. Click Start.
2. Click Control Panel.
3. Click Hardware and Sound.
4. Click Sound.
5. Click Speakers.
6. Click the Set Default Device button.
Security lock
Security locks enable you to anchor your computer to a desk or other heavy object
to help prevent unauthorized removal of the computer.
The computer has a security lock slot on the left side. Attach one end of the cable
to a desk and the other end to the security lock slot.
1. Turn the computer so the left side faces you.
2. Align the holes for the security lock and attach the lock.
Security lock
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-13
Optional Devices
8-14
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Chapter 9
Troubleshooting
TOSHIBA designed the computer for durability. However, should problems occur,
following the procedures in this chapter can help to determine the cause.
All readers should become familiar with this chapter. Knowing what might go
wrong can help prevent problems from occurring.
Problem solving process
Resolving problems will be much easier if you observe the following
guidelines:
n
Stop immediately when you recognize a problem exists. Further action may
result in data loss or damage. You may destroy valuable problem related
information that can help solve the problem.
n
Observe what is happening. Write down what the system is doing and what
actions you performed immediately before the problem occurred. If you have a
printer attached, print a copy of the screen using PrtSc.
The questions and procedures offered in this chapter are meant as a guide, they
are not definitive problem solving techniques. Many problems can be solved
simply, but a few may require help from your dealer. If you find you need to consult
your dealer or others, be prepared to describe the problem in as much detail as
possible.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-1
Troubleshooting
Preliminary checklist
Consider the simplest solution first. The items in this checklist are easy to fix and
yet can cause what appears to be a serious problem.
n
n
Make sure you turn on all peripheral devices before you turn on the computer.
This includes your printer and any other external device you are using.
Before you attach an external device, turn the computer off. When you turn
the computer back on it recognizes the new device.
n
n
Make sure all options are set properly in the setup program.
Check all cables. Are they correctly and firmly attached? Loose cables can
cause signal errors.
n
n
Inspect all connecting cables for loose wires and all connectors for loose pins.
Check that your CD/DVD/CD-RW is correctly inserted.
Make notes of your observations and keep them in a permanent error log. This will
help you describe your problems to your dealer. If a problem recurs, the log will
help you identify the problem faster.
Analyzing the problem
Sometimes the system gives clues that can help you identify why it is
malfunctioning. Keep the following questions in mind:
n
n
n
Which part of the system is not operating properly: keyboard, hard disk drive,
optical media drive, display. Each device produces different symptoms.
Is the operating system configuration set properly? Check the configuration
options.
What appears on the display screen? Does it display any messages or
random characters? Print a copy of the screen if you have a printer attached.
Look up the messages in the software and operating system documentation.
Check that all connecting cables are correctly and firmly attached. Loose
cables can cause erroneous or intermittent signals.
n
n
Do any indicators light? Which ones? What color are they? Do they stay on or
blink? Write down what you see.
Do you hear any beeps? How many? Are they long or short? Are they high
pitched or low? Is the computer making any unusual noises? Write down what
you hear.
Record your observations so you can describe them to your dealer.
9-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Software
The problems may be caused by your software
or disc. If you cannot load a software package,
the media may be damaged or the program might
be corrupted. Try loading another copy of the
software.
If an error message appears while you are
using a software package, check the software
documentation. These documents usually include
a problem solving section or a summary of error
messages.
Next, check any error messages in the operating
system documentation.
Hardware
If you cannot find a software problem, check your
hardware.
First run through the items in the preliminary
checklist above. If you still cannot correct
the problem, try to identify the source. The
next section provides checklists for individual
components and peripherals.
Before using a peripheral device or application software that is not an
authorized Toshiba part or product, make sure the device or software can be
used with your computer. Use of incompatible devices may cause injury or
may damage your computer.
Hardware and system checklist
This section discusses problems caused by your computer’s hardware or attached
peripherals. Basic problems may occur in the following areas:
n
n
n
n
n
n
n
n
n
n
n
n
System start-up
Self test
n
n
n
n
n
n
n
n
n
n
n
n
Fingerprint Sensor
USB device
Power
eSATA device
Additional memory module
Sound system
Volume control dial
External monitor
Modem
Password
Keyboard
Internal display panel
Hard disk drive
DVD Super Multi Double Layer drive
USB floppy diskette drive
ExpressCard
LAN
Wireless LAN
Bluetooth
SD/SDHC memory card
Pointing Device
Recovery Discs
User’s Manual
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
System start-up
When the computer does not start properly, check the following items:
n
n
n
Self Test
Power Sources
Power-on Password
Self test
When the computer starts up, the self test will be run automatically, and the
following will be displayed:
TOSHIBA
Leading Innovation >>>
This message remains on the screen for a few seconds.
If the self test is successful, the computer tries to load the operating system,
depending on how the Boot Priority is set in the TOSHIBA HW Setup program.
If any of the following conditions are present, the self test failed:
n
n
n
The computer stops and does not proceed to display information or messages
except the TOSHIBA logo.
Random characters appear on the screen, and the system does not function
normally.
The screen displays an error message.
Turn off the computer and check all cable connections. If the test fails again,
contact your dealer.
Power
When the computer is not plugged into an AC outlet, the battery pack is the
primary power source. However, your computer has a number of other power
resources, including an intelligent power supply and a Real Time Clock battery.
These resources are interrelated and any one could affect apparent power
problems. This section provides checklists for AC power and the battery. If you
cannot resolve a problem after following them, the cause could lie with another
power resource. In such a case, contact your dealer.
Overheating power down
If the computer’s internal temperature becomes too high, the computer will
automatically enter Hibernation Mode or Sleep Mode and shut down. If the
computer has reached room temperature and still does not start, or if it starts but
shuts down quickly contact your dealer.
9-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Procedure
Computer shuts down
and DC IN indicator
blinks orange.
Leave the computer off until the DC IN indicator
stops blinking.
It is recommended to leave the computer off until the interior reaches room
temperature even though the DC IN indicator stops blinking.
If the computer has reached room temperature and
it still does not start, or if it starts but shuts down
quickly, contact your reseller, dealer or service
provider.
Computer shuts down
and its DC IN indicator
is flashing white.
This indicates a problem with the heat dispersal
system - you should contact your reseller, dealer or
service provider.
AC power
If you have trouble turning on the computer with the AC adaptor connected, check
information.
Problem
Procedure
AC adaptor doesn’t
power the computer
Check the connections. Make sure the cord is
firmly connected to the computer and a power
outlet.
Check the condition of the cord and terminals. If
the cord is frayed or damaged, replace it. If the
terminals are soiled, wipe them with cotton or a
clean cloth.
If the AC adaptor still does not power the
computer, contact your dealer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-5
Troubleshooting
Battery
If you suspect a problem with the battery, check the Battery indicator. For
information on indicator and battery operation refer to Chapter 6, Power and
Problem
Procedure
Battery doesn’t
power the computer
The battery may be discharged. Connect the AC
adaptor to charge the battery.
Battery doesn’t
charge when the AC
adaptor is attached
(Battery indicator
does not glow
If the battery is completely discharged, it will not
begin charging immediately. Wait a few minutes.
If the battery still does not charge, make sure the
outlet of the AC adaptor is supplying power.
Test it by plugging in an appliance.
orange.)
Check whether the battery is hot or cold to the
touch. If the battery is too hot or too cold, it will not
charge properly. Let it reach room temperature.
Unplug the AC adaptor and remove the battery to
make sure the terminals are clean. If necessary
wipe them with a soft dry cloth dipped in alcohol.
Connect the AC adaptor and replace the battery.
Make sure it is securely seated.
Check the Battery indicator. If it does not glow,
let the computer charge the battery for at least
20 minutes. If the Battery indicator glows after
20 minutes, let the battery continue to charge at
least another 20 minutes before turning on the
computer.
If the indicator still does not glow, the battery may
be at the end of its operating life. Replace it.
If you do not think the battery is at the end of its
operating life, see your dealer.
Battery doesn’t
power the computer
as long as expected
If you frequently recharge a partially charged
battery, the battery might not charge to its full
potential. Fully discharge the battery, then try to
charge it again.
Check the power consumption settings in the
Power Options. Consider using a power saving
feature.
9-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Disposing of PC and PC batteries
n
Discard this PC in accordance with applicable laws and regulations. For
further information, contact your local government.
n
This PC contains rechargeable batteries. After repeated use, the batteries will
finally lose their ability to hold a charge and you will need to replace them.
Under certain applicable laws and regulation, it may be illegal to dispose of old
batteries by placing them in the trash.
n
n
Please be kind to our shared environment. Check with your local government
authority for details regarding where to recycle old batteries or how to dispose
of them properly. This product contains mercury. Disposal of this material
may be regulated due to environmental considerations. For disposal, reuse or
recycling information, please contact your local government.
If your hard disk or other storage media contains sensitive data, you should be
aware that standard deletion procedures do not remove data from the media.
These standard deletion procedures include:
n
n
n
n
Selecting Delete for a target file
Putting files in the Recycle Bin and emptying the Recycle Bin
Reformatting the media
Reinstalling an operating system from the recovery CD-ROM
The procedures above delete only the initial part of the data used for file
management. This makes the file invisible to the operating system, but the
data can still be read by specialized utilities. If you dispose of the PC, please
delete all the data on its hard disk drive. Doing so prevents unauthorized use
of such data. To ensure your data is not used for unauthorized purposes, you
can:
n
n
n
Physically destroy the hard disk drive
Use a proven specialized utility to overwrite all data
Take the hard disk drive to a professional deletion service
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-7
Troubleshooting
Real Time Clock
Problem
Procedure
The BIOS setting and
system date/time are
lost.
Charge in the RTC battery is exhausted or getting
low. You will need to set the date and time in the
BIOS setup screen using the following procedure
1. Press F2 key. BIOS setup will boot up.
2. Set the date in System Date.
3. Set the time in System Time.
4. Press F10 key. Confirmation message will appear.
5. Press Enter key. BIOS setup will terminate and
the computer will be rebooted.
After configuring the time and date for the Real Time Clock battery, we
recommend that you turn the power status of your computer to “ON” so that
the Real Time Clock battery is charged.
Keyboard
Keyboard problems can be caused by your setup configuration. For more
Problem
Procedure
Some letter keys
produce numbers
Check that the numeric keypad overlay is not
selected. Press Fn + F11 and try typing again.
Output to screen is
garbled
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. Refer to your
software’s documentation.
If you are still unable to use the keyboard, consult
your dealer.
9-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
LCD panel
Apparent LCD problems may be related to the computer’s setup.
Problem
Procedure
No display
Press hot keys Fn + F5 to change the display
priority, to make sure it is not set for an external
monitor.
Problems above
remain unresolved or
other problems occur
Refer to your software’s documentation to
determine if the software is causing the difficulty.
Run the diagnostic test.
Contact your dealer if the problems continue.
Hard disk drive
Problem
Procedure
Computer does not
boot from hard disk
drive
There may be a problem with your operating
system files. Refer to your operating system
documentation.
Slow performance
Your files may be fragmented. Run disk
Defragmenter to check the condition of your
files and disk. Refer to your operating system
documentation or online help for information on
running disk Defragmenter.
As a last resort, reformat the hard disk. Then,
reload the operating system and other files.
If problems persist, contact your dealer.
Solid State Drive
Problem
Procedure
Computer does not
boot from solid state
drive
There may be a problem with your operating
system files. Refer to your operating system
documentation.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-9
Troubleshooting
Recovery Discs
Problem
Procedure
The following message
You will see this message if you have previously
appears when executing chosen to remove the partition and are trying to
Recovery Disc Creator.
create “Recovery Media”. When there is no recovery
partition, the Recovery Disc Creator cannot make
Recovery Media. However, if you have already
created a “Recovery Media”, you can use it to restore
the recovery partition.
“The Recovery Disc
Creator can not be
launched because there
is no recovery partition.”
Simply follow the instructions in “Restoring the
preinstall software from your creating Recovery
Media” section in this manual. You will be directed
to select “Restore Original Factory Image” from the
drop-down menu. If you have not created “Recovery
Media”, please contact TOSHIBA support for
assistance.
DVD Super Multi Double Layer drive
Problem
Procedure
You cannot access a
CD/DVD in the drive
Make sure the drive’s drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the CD/DVD is
properly seated. It should lie flat with the label facing
up.
A foreign object in the drawer could block laser light
from reading the CD/DVD. Make sure there is no
obstruction. Remove any foreign object.
Check whether the CD/DVD is dirty. If it is, wipe
it with a clean cloth dipped in water or a neutral
9-10
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Procedure
Some CD/DVDs run The software or hardware configuration may
correctly, but others
do not.
be causing a problem. Make sure the hardware
configuration matches your software’s needs. Check
the CD/DVD documentation.
Check the type of CD/DVD you are using. The drive
supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM:
CD-DA, CD-Text, Photo
CD (single/multi-session),
CD-ROM Mode 1, Mode
2, CD-ROM XA Mode 2
(Form1, Form2), Enhanced
CD (CD-EXTRA), Addressing
Method 2
n
DVD Super Multi Double Layer drive
Recordable DVD-R/-R DL, DVD+R/+R
DVD:
DL, DVD-RW, DVD+RW,
DVD-RAM
Check the region code on the DVD. It must match
that on the DVD Super Multi Double Layer drive.
Region codes are listed in the Optical Disc Drive
Cannot write
correctly
If you have trouble writing, make sure you are
observing the following precautions:
Use only media recommended by TOSHIBA Do not
use the mouse or keyboard during writing.
Use only the software supplied with the computer for
recording.
Do not run or start other software during writing.
Do not jar the computer during writing.
Do not connect/disconnect external devices or install/
remove internal cards during writing. If problems
persist, contact your dealer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-11
Troubleshooting
USB floppy diskette drive
Problem
Procedure
Drive does not operate
Check the connection between the computer and the
drive to ensure that it is properly attached.
Some programs run
correctly but others do
not
The computer’s software or hardware configuration
may be causing a problem - ensure that these
configurations match your requirements (refer to any
relevant documentation, for example that supplied
with any software in use, for further information).
You cannot access the
external floppy diskette
drive
Try another floppy diskette in the drive - if you are
able to access this disk then it indicates the original
disk and not the drive is probably causing the
problem.
If you are still unable to resolve the problem, contact
your reseller, dealer or service provider.
Memory card: Secure Digital (SD), Secure Digital
High Capacity (SDHC), Memory Stick (MS),
Memory Stick Pro (MS Pro), MultiMediaCard
(MMC), and xD-Picture Card (xD)
Problem
Procedure
Memory card error
occurs
Restart the memory card to make sure it is firmly
connected.
Check the card’s documentation.
You cannot write to the
Make sure the card is not write protected.
memory card
You cannot read a file
Make sure the target file is on the memory card
inserted in the slot.
If problems persist, contact your dealer.
9-12
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Pointing device
If you are using a USB mouse, also refer to the USB section in this chapter and to
your mouse documentation.
TouchPad
Problem
Procedure
On-screen pointer
does not respond to
Pad operation
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to return to its
normal shape and try again to move it.
Double-tapping does
not work
Try changing the double-click speed setting in the
mouse control utility.
1. To access this utility, click
, Control Panel,
Hardware and Sound, then Mouse icon.
2. Within the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and
click OK.
The mouse pointer
moves too fast or too
slow
Try changing the speed setting in the mouse
control utility.
1. To access this utility, click
, Control Panel,
Hardware and Sound, then Mouse icon.
2. Within the Mouse Properties window, click the
Pointer Options tab.
3. Set the pointer speed as required and click OK.
The response of
the TouchPad is too
sensitive
Adjust the touch sensitivity.
1. Click Start
Control Panel
Hardware
and Sound
Mouse icon.
2. Within the Mouse Properties window, click the
Advanced tab.
3. Click the Advanced feature settings... button.
4. Advanced feature settings is displayed.
5. Within the Pointer speed and tapping settings,
click Settings... button.
6. Detailed TouchPad settings window is
displayed.
7. Move the slider bar to adjust the sensitivity in
the Touch Sensitivity.
8. Click the OK button.
9. Click the OK button on Advanced feature
setting screen.
If you are still unable to resolve the problem,
contact your reseller, dealer, or service provider.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-13
Troubleshooting
USB
Also refer to your USB device’s documentation.
Problem
Procedure
USB device does not
work
Check for a firm cable connection between the
USB port on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows® Vista
documentation for information on checking the
drivers.
If problems persist, contact your dealer.
USB mouse
Problem
Procedure
On-screen pointer
does not respond to
mouse operation
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to the
USB port.
Double-clicking does
not work
Try changing the double-click speed setting in the
mouse control utility.
1. To access this utility, click
, Control Panel,
Hardware and Sound, then Mouse icon.
2. Within the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and
click OK.
The mouse pointer
moves too fast or too
slow
Try changing the speed setting in the mouse
control utility.
1. To access this utility, click
, Control Panel,
Hardware and Sound, then Mouse icon.
2. Within the Mouse Properties window, click the
Pointer Options tab.
3. Set the pointer speed as required and click OK.
The mouse pointer
moves erratically
The mouse might be dirty. Refer to your mouse
documentation for instructions on cleaning.
If problems persist, contact your dealer.
9-14
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
USB Sleep and Charge function
Problem
Procedure
I cannot use the
“USB Sleep and
Charge function”.
The setting of “USB Sleep and Charge function”
may be [Disabled]. Change the setting to
[Enabled] in the TOSHIBA USB Sleep and Charge
utility..
When there is a current overflow of the external
device connected to the compatible port, USB
bus power (DC5V) supply may be stopped for
safety reasons. When this happens, disconnect
an external device if some external devices
are connected. After that, turn the power of the
computer ON/OFF to restore the function. If this
function can not be still used even if only one
external device is connected, stop using the
external device because its current is over the
acceptable value of this computer.
Some external devices may not be able to use the
“USB Sleep and Charge function”. In this case,
please try one or more of the following methods.
n
n
n
Change a mode setting of [Enabled] by the
BIOS Setup.
Turn OFF the computer while external devices
are connected.
Connect external devices after turning OFF of
the computer.
If this function can not be still used, change the
setting to [Disabled] in the BIOS Setup and stop
using this function.
The battery depletes
quickly even when
I turned OFF
the power of the
computer.
When “USB Sleep and Charge function” is set
to [Enabled] in the BIOS Setup, USB bus power
(DC5V) will be supplied to the external device
connected to the compatible port. If external
device is connected to the compatible port when
the AC adaptor is not connected to the computer,
the battery of the computer will be depleted even
when the power of the computer is turned OFF.
Connect the AC adaptor to the computer or
change the “USB Sleep and Charge function”
setting to [Disabled] in the BIOS Setup.
Instead use and USB port that does not have the
USB Sleep and Charge function-compatible icon
(
).
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-15
Troubleshooting
Problem
Procedure
External devices
connected to the
compatible ports
do not work when
connected to a
Some external devices may not work when
connected to a compatible port when the “USB
Sleep and Charge function” is [Enabled] in the
BIOS Setup.
Reconnect the external device after turning ON
the computer.
compatible port.
If the external device still doest not work, connect
device to an USB port that does not have the USB
Sleep and Charge function-compatible icon (
or change the “USB Sleep and Charge function”
setting to [Disabled] in the BIOS Setup.
)
The “USB WakeUp
function” does not
work.
When “USB Sleep and Charge function” is set to
[Enabled] in the HW Setup, the “USB WakeUp
function” does not work for ports that support the
USB Sleep and Charge function.
In that case, use an USB port that does not have
the USB Sleep and Charge function-compatible
icon ( ) or change the “USB Sleep and Charge
function” setting to [Disabled] in the BIOS Setup.
Memory expansion
modules.
Problem
Procedure
The computer hangs
up
Make sure the memory module installed in the
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
1. Turn off the power.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the memory module.
5. Replace the battery pack and/or connect the
AC adaptor.
6. Turn on the power.
If problems persist, contact your dealer.
9-16
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Sound system
Refer also to documentation for your audio devices.
Problem
Procedure
No sound is heard
Check the software volume settings.
Make sure the headphone connection is secure.
If problems persist, contact your dealer.
External Monitor
Problem
Procedure
Monitor does not
turn on
Make sure that the external monitor’s power
switch is on. Confirm that the external monitor’s
power cable is plugged into a working power
outlet.
No display
Try adjusting the contrast and brightness controls
on the external monitor.
Press hot keys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Display error occurs
Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Modem
Problem
Procedure
Communication
software can’t
initialize modem
Make sure the computer’s internal modem
settings are correct. Refer to Phone and Modem
Properties in the Control Panel.
You can hear a dial
tone but can’t make
a call
If the call is going through a PBX machine, make
sure the communication application’s tone dial
detection feature is disabled.
You can also use the ATX command.
You place a call, but
a connection can’t
be made
Make sure the settings are correct in your
communications application.
After making a call
you can’t hear a ring
Make sure the tone or pulse selection in your
communications application is set correctly.
You can also use the ATD command.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-17
Troubleshooting
Problem
Procedure
Communication is
cut off unexpectedly
The computer will automatically cut off
communication when connection with the carrier
is not successful for a set time interval. Try
lengthening this time interval.
A CONNECT display
is quickly replaced
by NO CARRIER
Check the error control setting in your
communications application.
You can also use the AT\N command.
Character
In data transmission, make sure the parity bit
and stop bit settings correspond with those of the
remote computer.
display becomes
garbled during a
communication
Check the flow control and communication
protocol.
You cannot receive
an incoming call
Check the rings before auto answer setting in
your communications application.
You can also use the ATS0 command.
If problems persist, contact your dealer.
LAN
Problem
Procedure
Cannot access LAN
Check for a firm cable connection between the
LAN jack and the LAN hub.
If problems persist, consult your LAN
administrator.
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to Chapter
Problem
Procedure
Cannot access
Wireless LAN
Make sure the computer’s wireless
communication switch is set to on.
If problems persist, contact your LAN
administrator.
The Wireless LAN feature is not available on all models.
9-18
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Fingerprint Sensor
Problem
Procedure
Reading of the
fingerprint was not
successful
Please try again using the correct posture. Refer
Try the recognition process again using another
enrolled finger.
The fingerprint
cannot be read due
to injuries to the
finger
Try the recognition process again using another
enrolled finger.
If fingerprints from all the enrolled fingers cannot
be read, please logon by using the keyboard to
input the password for the time being.
If problems persist, contact your dealer.
Fingerprint Pre-OS
feature or Single
Sign On feature
Please use TOSHIBA HW Setup to register the
User Password if it was not registered.
cannot be enabled
Fingerprint Pre-OS
feature does not
work
Make sure you have enroll finger in windows
account.
Set the User Password by using TOSHIBA HW
Setup and restart the system.
Make sure place a checkmark in “Enable Pre-OS
Fingerprint Authentication” on the TrueSuite
Access Manager setting.
ExpressCard
Problem
Procedure
ExpressCard error
occurs
Reseat the ExpressCard to make sure it is firmly
connected.
Make sure the connection between the external
device and the card is firm.
Check the card’s documentation.
If problems persist, contact your dealer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-19
Troubleshooting
TOSHIBA support
If you require any additional help using your computer or if you are having
problems operating the computer, you may need to contact TOSHIBA for
additional technical assistance.
Before you call
Some problems you experience may be related to software or the operating
system, it is important to investigate other sources of assistance first. Before
contacting TOSHIBA, try the following:
n
n
Review troubleshooting sections in the documentation for software and
peripheral devices.
If a problem occurs when you are running software applications, consult the
software documentation for troubleshooting suggestions. Call the software
company’s technical support for assistance.
n
Consult the dealer you purchased your computer and/or software from. They
are your best sources for current information and support.
Where to write
If you are still unable to solve the problem and suspect that it is hardware related,
write to TOSHIBA at the nearest location listed on the below.
Outside of Europe
Australia
In Europe
Germany & Austria
TOSHIBA Australia Pty. Ltd.
Information Systems Division
84-92 Talavera Road
TOSHIBA Europe (I.E.) GmbH
Geschäftsbereich, Deutschland-
Österreich
North Ryde N.S.W. 2113 Sydney
Hammfelddamm8,
D-41460 Neuss, Germany
Canada
France
TOSHIBA of Canada Ltd.
191 McNabb Street,
Markham, Ontario
L3R 8H2
TOSHIBA Systèms France S.A.
7, Rue Ampère B.P. 131,
92804 Puteaux Cedex
China
Netherlands
TOSHIBA Personal Computer &
Network (Shanghai) Co. Ltd.
10F, BEA Finance Tower,
No. 66 Hua Yuan Shi Qiao Road,
Pudong, Shanghai
TOSHIBA Information Systems,
Benelux B.V.
Rivium Boulevard
41 2909 LK Capelle a/d IJssel
People’s Republic of China
200120
9-20
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Outside of Europe
Singapore
In Europe
Spain
TOSHIBA Singapore Pte. Ltd.
438B Alexandra Road #06-01
Alexandra Technopark
TOSHIBA Information Systems,
ESPAÑA
Parque Empresarial San Fernando
Edificio Europa, la Planta,
Escalera A 28830 Madrid
Singapore 119968
United States of America
United Kingdom
TOSHIBA America Information
Systems, Inc.
9740 Irvine Boulevard
Irvine, California 92618
USA
TOSHIBA Information Systems
(U.K.) Ltd.
TOSHIBA Court
Weybridge Business Park
Addlestone Road
Weybridge, Surrey KT15 2UL
India
The Rest of Europe
TOSHIBA India Pvt Ltd.
PC Division
6th Floor, DR Gopal Das Bhawan
Barakhamba Road, Delhi-110001,
India
TOSHIBA Europe (I.E.) GmbH
Geschäftsbereich,
Deutschland-Österreich
Hammfelddamm 8,
D-41460 Neuss, Germany
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-21
Troubleshooting
9-22
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Appendix A
Specifications
This appendix summarizes the computer’s technical specifications.
Environmental Requirements
Conditions
Operating
Ambient temperature
Relative humidity
5°C (41°F) to 35°C (95°F)
20% to 80%
(noncondensing)
Non-operating
-20°C (-4°F) to 65°C (149°F) 10% to 90%
(noncondensing)
Wet-bulb
26°C maximum
temperature
Conditions
Operating
Altitude (from sea level)
0 to 3,000 meters
Non-operating
0 to 10,000 meters maximum
Power Requirements
AC adaptor
Computer
100-240 volts AC
50 or 60 hertz (cycles per second)
19 V DC
Built-in Modem
This information is applicable to the models equipped with a built-in modem.
Network control unit (NCU)
Type of NCU
Type of line
AA
Telephone line (analog only)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
A-1
Specifications
Type of dialling
Pulse
Tone
Control command
Monitor function
AT commands
EIA-578 commands
Computer’s speaker
Communication specifications
Communication
System
Data: Full duplex
Fax: Half duplex
Communication
protocol
Data
V.21/V.22/V.22bis/V.32/
V.32bis/V.34/V.90/V.92
103/212A
ITU-T-Rec
(Former CCITT)
Bell
Fax:
ITU-T-Rec
(Former CCITT)
V.17/V.29/V.27ter/V.21 ch2
Communication Speed Data transmission and reception
300/1200/2400/4800/7200/9600/12000/14400/
16800/19200/21600/24000/26400/28800/31200/
33600 bps
Data reception only with V.90
28000/29333/30666/32000/33333/34666/36000/
37333/38666/40000/41333/42666/44000/45333/
46666/48000/49333/50666/52000/53333/54666/
56000 bps
Fax
2400/4800/7200/9600/12000/14400 bps
Transmitting level
Receiving level
-10 dBm
-10 to -40 dBm
600 ohms ±30%
Input/output
impedance
Error correcting
Data compression
Power supply
MNP class 4 and ITU-T V.42
MNP class 5 and ITU-T V.42bis
+3.3V (supplied by computer)
A-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Appendix B
Display Controller
Display Controller
The display controller interprets software commands into hardware commands
that turn particular pels on or off.
The controller is an advanced Video Graphics Array (VGA) that provides Super
VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD
and external monitors.
A high-resolution external monitor connected to the computer can display up to
2048 horizontal and 1536 vertical pixels at up to 16M colors.
The display controller also controls the video mode, which uses industry standard
rules to govern the screen resolution and the maximum number of colors that can
be displayed on screen.
Software written for a given video mode will run on any computer that supports the
mode.
The computer’s display controller supports all SVGA and XGA modes, the most
widely used industry standards.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
B-1
Display Controller
B-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C
Wireless LAN
Card Specifications
Form Factor
Compatibility
PCI Express Mini Card
n
n
IEEE 802.11 Standard for Wireless LANs
Wi-Fi (Wireless Fidelity) certified by the Wi-Fi
Alliance.
The “Wi-Fi CERTIFIED” logo is a certification
mark of the Wi-Fi Alliance.
Network Operating
System
n
n
Microsoft® Windows® Networking
Media Access
Protocol
CSMA/CA (Collision Avoidance) with
Acknowledgement (ACK)
Data Rate
n
n
54/48/36/24/18/12/9/6 Mb/s (IEEE 802.11a/g)
11/5.5/2/1 Mb/s (IEEE 802.11 b)
The Wireless LAN feature is not available on all models.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
C-1
Wireless LAN
Radio Characteristics
Radio Characteristics of Wireless LAN Cards may vary according to:
n
n
Country/region where the product was purchased
Type of product
Wireless communication is often subject to local radio regulations. Although
Wireless LAN wireless networking products have been designed for operation in
the license-free 2.4GHz and 5GHz band, local radio regulations may impose a
number of limitations to the use of wireless communication equipment.
Refer to the sheet “Information to the User” for regulatory information that may
apply in your country/region.
R-F Frequency
n
n
n
n
Band 2.4GHz (2400~2497 MHz) for
802.11b/g/n (draft version)
Band gGHz (5150~5850 MHz) for
802.11a/n (draft version)
Modulation
Technique
DSSS-CCK, DSSS-DQPSK, DSSS-DBPSK
(IEEE 802.11b)
OFDM-BPSK, OFDM-QPSK, OFDM-
16QAMOFDM-16QAM (IEEE 802.11a/g)
The range of the wireless signal is related to the transmit rate of the wireless
communication device. Communications at a lower transmission rate may travel
larger distances.
n
n
The range of your wireless devices can be affected when the antennas are
placed near metal surfaces and solid high-density materials.
Range is also impacted due to “obstacles” in the path of the transmission that
may either absorb or reflect the radio signal.
C-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless LAN
Supported Frequency Sub-bands
Subject to the radio regulations that apply in the countries/regions, your Wireless
LAN card may support a different set of 2.4 GHz channels. Consult your
Authorized Wireless LAN or TOSHIBA Sales office for information about the radio
regulations that apply in the countries/regions.
Wireless IEEE 802.11 Channels Sets (Revision B,
G and draft N)
Frequency Range
Channel ID
2400-2483.5 MHz
1
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457
2462
2467*1
2472*1
2
3
4
5
6
7
8
9
10
11
12
13
*1
Refer to the sheet Approved Countries/Regions for use for the countries/regions
that in which these channels can be used.
When installing Wireless LAN cards, the channel configuration is managed as
follows:
n
For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless
LAN card will automatically start operation at the channel identified by the
Wireless LAN Access Point. When roaming between different access points
the station can dynamically switch to another channel if required.
n
In a Wireless LAN Access Point, the Wireless LAN card will use the factory-
set default channel (printed in bold), unless the LAN Administrator selected a
different channel when configuring the Wireless LAN Access Point device.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
C-3
Wireless LAN
C-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D
AC Power Cord and Connectors
The power cord’s AC input plug must be compatible with the various international
AC power outlets and the cord must meet the standards for the country/region in
which it is used. All cords must meet the following specifications:
Length:
Minimum 1.7 meters
Minimum 0.75 mm2
Minimum 2.5 amperes
Wire size:
Current rating:
Voltage rating:
125 or 250 VAC (depending on country/region’s
power standards)
Certification agencies
U.S. and Canada:
UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2 two conductor
Australia:
Japan:
AS
DENANHO
Europe:
Austria:
Belgium:
Denmark:
Finland:
France:
OVE
Italy:
IMQ
CEBEC
DEMKO
SETI
The Netherlands:
Norway:
KEMA
NEMKO
SEMKO
SEV
Sweden:
UTE
Switzerland:
United Kingdom:
Germany:
VDE
BSI
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
D-1
AC Power Cord and Connectors
In Europe, power cords must be VDE type, H05VVH2-F and two conductor.
For the United States and Canada, plug configuration must be a 2-15P (250 V) or
1-15P (125 V) as designated in the U.S. National Electrical code handbook and
the Canadian Electrical Code Part II.
The following illustrations show the plug shapes for the U.S.A. and Canada, the
United Kingdom, Australia and Europe.
USA and Canada
United Kingdom
UL approved
CSA approved
BS approved
Australia
Europe
Approved by the appropriate
agency
AS approved
D-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Appendix E
TOSHIBA PC Health Monitor
The TOSHIBA PC Health Monitor software program monitors computer system
functions such as power consumption, the cooling system and HDD/SSD Alert.
It alerts users of specific system conditions via pop-up messages. It also tracks
the usage of the computer and related devices, logging the service relevant
information on the computer’s hard disk drive.
n
The collected information includes device operation time and number of
actuations or status changes (i.e.: number of power button and Fn key
combination uses, AC adaptor, battery, LCD, fan, HDD, sound volume,
wireless communication switch, TOSHIBA Express Port Replicator and USB
information), date of initial system use, and also computer and device usage
(i.e.: power settings, battery temperature and recharging, CPU, memory,
backlight illumination time, and temperatures for various devices), property
(e.g., product name, model number, part number, serial number, BIOS
version, FW version) of the system and components (e.g., Video device,
Sound device, Network device, Hard Disk drive, Solid State drive, Optical Disc
drive), operating system and software information (e.g., OS version, OS install
date, Direct X version, Internet Explorer version, installed update program and
driver lists). The stored data uses a very small portion of the total hard disk
capacity, approximately 10MB or less per year.
n
This information is used to identify and provide a notification of system
conditions which may effect the performance of your Toshiba computer. It may
also be used to help diagnose problems should the computer require service
by Toshiba or Toshiba’s authorized service providers. Additionally, Toshiba
may also use this information for quality assurance analysis. Subject to the
use restrictions above, the HDD data logged may be transferred to entities
located outside of your country or region of residence (e.g., European Union).
Those countries may or may not have the same data protection laws or data
protection levels as required by your home country or region.
n
n
Once enabled, you may disable the TOSHIBA PC Health Monitor at any time
by uninstalling the software via Uninstall a program in the Control Panel.
Doing so will automatically delete all collected information from the HDD.
The TOSHIBA PC Health Monitor software does not extend or modify
Toshiba’s obligations under its standard limited warranty in any way. Toshiba’s
standard limited warranty terms and limitations apply.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
E-1
TOSHIBA PC Health Monitor
Starting the TOSHIBA PC Health Monitor
The TOSHIBA PC Health Monitor can be started using the following methods:
n
n
Double click TOSHIBA PC Health Monitor in the Welcome Center.
Click Start
All Programs
TOSHIBA
Utilities
PC Health
Monitor.
n
Click the icon in the notification area, then click the “TOSHIBA PC Health
Monitor is not enabled. Please click here for more details.” message
when it is displayed. (*)
No matter which method is used, the TOSHIBA PC Health Monitor explanation
screen will be displayed.
Clicking “Next” will display the “TOSHIBA PC Health Monitor Software Notice &
Acceptance” screen. Please carefully read the information displayed. Selecting
“Accept” and clicking “OK” will enable the program. By enabling the TOSHIBA
PC Health Monitor software, you agree with these terms and conditions and to
the use and sharing of the collected information. Once the program is enabled,
the TOSHIBA PC Health Monitor screen is displayed, and the program will begin
monitoring system functions and collecting information.
(*) This message will no longer be displayed after clicking “Enable this software
program now” or “Disable this software program now” on the “TOSHIBA PC Health
Monitor Software Notice & Acceptance” screen.
If a TOSHIBA PC Health Monitor message is displayed
A message will be displayed if any changes which may interfere with the operation
of the program are detected. If the following special message is displayed, carry
out the procedures listed below.
If the “It is possible that the PC cooling performance has decreased. Please
click [OK] to run the TOSHIBA Colling Performance Diagnostic Tool to check the
cooling performance of your PC“, message is displayed.
1. Click “OK” to start the “TOSHIBA Cooling Performance Diagnostic Tool”.
2. It is possible that the PC cooling performance has decreased. We strongly
recommend you have your PC checked by a Toshiba Authorized Service
Provider.
If you must use the PC for a short period of time before taking it to the Toshiba
Authorized Service Provider, we recommend you change the cooling method
setting.
E-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA PC Health Monitor
Click Start
Change advanced power settings
Cooling Method Battery Optimized.
Control Panel
Power Options
Change plan settings
TOSHIBA Power Saver Settings
This PC Cooling Performance Diagnostic Tool does not in any way expand
or modify Toshiba’s obligations under its standard limited warranty. Toshiba’s
standard limited warranty terms and limitations apply.
* If another message is displayed, follow the instructions displayed on screen.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
E-3
TOSHIBA PC Health Monitor
E-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Appendix F
Legal Footnotes
This chapter states the Legal Footnotes information applicable to TOSHIBA
computers. In the text in this manual, *XX is used to show which Legal Footnotes
description is related to TOSHIBA computers. Description(s) related to this
computer are marked with a blue *XX in this manual. Clicking on *XX will display
the related description.
CPU
Central Processing Unit (“CPU”) Performance Legal Footnotes. CPU performance
in your computer product may vary from specifications under the following
conditions:
n
n
n
n
n
use of certain external peripheral products
use of battery power instead of AC power
use of certain multimedia, computer generated graphics or video applications
use of standard telephone lines or low speed network connections
use of complex modeling software, such as high end computer aided design
applications
n
n
use of several applications or functionalities simultaneously
use of computer in areas with low air pressure (high altitude >1,000 meters or
>3,280 feet above sea level)
n
use of computer at temperatures outside the range of 5°C to 30°C (41°F
to 86°F) or >25°C (77°F) at high altitude (all temperature references are
approximate and may vary depending on the specific computer model - please
refer to your computer documentation or visit the TOSHIBA website at
www.pcsupport.toshiba.com for details).
CPU performance may also vary from specifications due to design configuration.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
F-1
Legal Footnotes
Under some conditions, your computer product may automatically shutdown.
This is a normal protective feature designed to reduce the risk of lost data or
damage to the product when used outside recommended conditions. To avoid
risk of lost data, always make back-up copies of data by periodically storing it
on an external storage medium. For optimum performance, use your computer
product only under recommended conditions. Read additional restrictions in your
product documentation. Contact TOSHIBA technical service and support, refer to
64-Bit Computing.
64-bit processors are designed to take advantage of 32 and 64 bit computing.
64-bit computing requires that the following hardware and software requirements
are met:
n
n
n
n
64-bit Operating System
64-bit CPU, Chipset and BIOS (Basic Input/Output System)
64-bit Device drivers
64-bit applications
Certain device drivers and/or applications may not be compatible with a 64- bit
CPU and therefore may not function properly. A 32-bit version of the operating
system is preinstalled on your computer unless explicitly stated that the operating
system is 64-bit.
Memory (Main System)
Part of the main system memory may be used by the graphics system for graphics
performance and therefore reduce the amount of main system memory available
for other computing activities. The amount of main system memory allocated
to support graphics may vary depending on the graphics system, applications
utilized, system memory size and other factors. For computer’s configured with 4
GB of system memory, the full system memory space for computing activities will
be considerably less and will vary by model and system configuration.
Battery Life
Battery life may vary considerably depending on product model, configuration,
applications, power management settings and features utilized, as well as the
natural performance variations produced by the design of individual components.
Published battery life numbers are achieved on select models and configurations
tested by TOSHIBA at the time of publication. Recharge time varies depending on
usage. Battery may not charge while computer is consuming full power.
After going through many charge and discharge cycles, the battery will lose its
ability to perform at maximum capacity and will need to be replaced. This is a
normal phenomenon for all batteries. To purchase a new battery pack, see the
accessories information that is shipped with your computer.
F-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal Footnotes
Hard Disk Drive (HDD) Capacity
1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The
computer operating system, however, reports storage capacity using powers of
2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows
less storage capacity. Available storage capacity will also be less if the product
includes one or more pre-installed operating systems, such as Microsoft Windows
and/or pre-installed software applications, or media content. Actual formatted
capacity may vary.
LCD
Over a period of time, and depending on the usage of the computer, the
brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of
LCD technology.
Maximum brightness is only available when operating in AC power mode. The
screen will dim when the computer is operated on battery power and you may not
be able to increase the brightness of the screen.
Graphics Processor Unit (“GPU”)
Graphics processor unit (“GPU”) performance may vary depending on product
model, design configuration, applications, power management settings and
features utilized. GPU performance is only optimized when operating in AC power
mode and may decrease considerably when operating in battery power mode.
Total Available Graphics Memory is the total of, as applicable, Dedicated Video
Memory, System Video Memory and Shared System Memory. Shared System
Memory will vary depending on system memory size and other factors.
Wireless LAN
The transmission speed over the wireless LAN and the distance over which
wireless LAN can reach may vary depending on surrounding electromagnetic
environment, obstacles, access point design and configuration, and client design
and software/hardware configurations. The actual transmission speed will be
lower than the theoretical maximum speed.
The wireless adapter is based on a draft 2.0 release version of the IEEE 802.11n
specification and; may not be full compatible with, or support some feature (e.g.,
security) of, certain Wi-Fi equipment.
Copy Protection
Applicable copy protection standards included in certain media may prevent or
limit recording or viewing of the media.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
F-3
Legal Footnotes
Images
All images are simulated for purposes of illustration.
Non-applicable Icons
Certain computer chassis are designed to accommodate all possible
configurations for an entire product series. Therefore, please be aware that your
selected model may not have all the features and specifications corresponding to
all of the icons or switches shown on the computer chassis.
USB Sleep & Charge
The “USB Sleep & Charge function” may not work with certain external devices
even if they are compliant with the USB specification. In those cases, turn the
power of the computer ON to charge the device.
F-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Glossary
The terms in this glossary cover topics related to this manual. Alternate naming is
included for reference.
Abbreviations
AC: Alternating current
ACPI: Advanced Configuration and Power Interface
AMT: Intel Active Management Technology
ASCII: American Standard Code for Information Interchange
BIOS: basic input/output system
bps: bits per second
CD: compact disc
CD-ROM: Compact Disc Read-Only Memory
CD-RW: Compact Disc-ReWritable
CMOS: complementary metal-oxide semiconductor
CPU: central processing unit
CRT: cathode ray tube
DC: direct current
DDC: display data channel
DDR: double data rate
DIMM: dual inline memory module
DVD: digital versatile disc
DVD-R: Digital Versatile Disc-Recordable
DVD-RAM: Digital Versatile Disc-Random Access Memory
DVD-R (Dual Layer): Digital Versatile Disc Recordable Dual Layer
DVD-ROM: Digital Versatile Disc-Read Only Memory
DVD-RW: Digital Versatile Disc-ReWritable
DVD+R (Double Layer): Digital Versatile Disc Recordable Double Layer
FDD: floppy diskette drive
GB: gigabyte
HDD: hard disk drive
HDCP: high-bandwidth digital content protection
User’s Manual
Glossary-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
HDMI: high definition multimedia interface
HDMI-CEC: high definition multimedia interface consumer electronics control
IDE: integrated drive electronics
IEEE: Institute of Electrical and Electronics Engineers
IMSM: Intel Matrix Storage Manager
I/O: input/output
KB: kilobyte
LAN: local area network
LCD: liquid crystal display
LED: light emitting diode
MB: megabyte
MMC: multi media card
OCR: optical character recognition (reader)
PC: personal computer
PCI: peripheral component interconnect
RAM: random access memory
RGB: red, green, and blue
ROM: read only memory
RTC: real time clock
S/P DIF: Sony/Philips Digital Interface Format
SDRAM: synchronous dynamic random access memory
SLI: Scalable Link Interface
SO-DIMM: small-outline dual in line memory module
SSD: Solid state drive
TFT: thin-film transistor
USB: Universal Serial Bus
UXGA: ultra extended graphics array
VGA: video graphics array
WAN: wide area network
WSXGA: wide super extended graphics array
WSXGA+: wide super extended graphics array plus
WUXGA: Wide Ultra Extended Graphics Array
WXGA: wide extended graphics array
WXGA+: wide extended graphics array plus
XGA: extended graphics array
A
adaptor: A device that provides a compatible connection between two units. For
example, the computer’s internal display adapter receives information from
the software and translates it into images on the screen. An adapter can take
a number of forms, from a microprocessor to a simple connector: An intelligent
adapter (one that is capable of doing some processing) may also be called a
controller.
alphanumeric: Keyboard characters including letters, numbers and other
symbols, such as punctuation marks or mathematical symbols.
Glossary-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
alternating current (AC): Electric current that reverses its direction of flow at
regular intervals.
analog signal: A signal whose characteristics such as amplitude and frequency
vary in proportion to (are an analog of) the value to be transmitted. Voice
communications are analog signals.
application: A group of programs that together are used for a specific task such
as accounting, financial planning, spreadsheets, word processing and games.
ASCII: American Standard Code for Information Interchange. ASCII code is a set
of 256 binary codes that represent the most commonly used letters, numbers,
and symbols.
B
backup: A copy of a file, usually on a removable disk, kept in case the original file
is lost or damaged.
binary: The base two number system composed of zeros and ones (off or on),
used by most digital computers. The right-most digit of a binary number has
a value of 1, the next a value of 2, then 4, 8, 16, and so on. For example, the
binary number 101 has a value of 5. See also ASCII.
BIOS: Basic Input/Output System. The firmware that controls data flow within the
computer. See also firmware.
bit: Derived from “binary digit”, the basic unit of information used by the computer.
It is either zero or one. Eight bits is one byte. See also byte.
Bluetooth: A short-range radio technology designed to simplify wireless
communication among computers, communication devices and the Internet.
board: A circuit board. An internal card containing electronic components, called
chips, which perform a specific function or increase the capabilities of the
system.
boot: Short for bootstrap. A program that starts or restarts the computer. The
program reads instructions from a storage device into the computer’s memory.
boot disk: See system disk.
bootable disk: See system disk.
bps: Bits per second. Typically used to describe the data transmission speed of a
modem.
buffer: The portion of the computer’s memory where data is temporarily stored.
Buffers often compensate for differences in the rate of flow from one device to
another.
User’s Manual
Glossary-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
bus: An interface for transmission of signals, data or electric power.
byte: The representation of a single character. A sequence of eight bits treated as
a single unit; also the smallest addressable unit within the system.
C
cache memory: A section of very fast memory in which frequently used
information is duplicated for quick access. Accessing data from cache is faster
than accessing it from the computer’s main memory. See also L1 cache, L2
cache.
capacity: The amount of data that can be stored on a magnetic storage device
such as a floppy diskette or hard disk drive. It is usually described in terms of
kilobytes (KB), where one KB = 1024 bytes, megabytes (MB), where one MB
= 1024 KB and gigabytes (GB), where one GB = 1024 MB.
CardBus: An industry standard bus for 32-bit PC Cards.
CD: An individual compact disc. See also CD-ROM.
CD-R: A Compact Disc-Recordable disc can be written once and read many
times. See also CD-ROM.
CD-ROM: A Compact Disc Read-Only Memory is a high capacity disc that can
be read from but not written to. The CD-ROM drive uses a laser, rather than
magnetic heads, to read data from the disc.
CD-RW: A Compact Disc-ReWritable disc can be rewritten many times. See also
CD-ROM.
character: Any letter, number, punctuation mark, or symbol used by the computer.
Also synonymous with byte.
chassis: The frame containing the computer.
chip: A small semiconductor containing computer logic and circuitry for
processing, memory, input/output functions and controlling other chips.
Click: To press and release the pointing device’s primary button without moving
the pointing device. In the Windows® operating system, this refers to the
pointing device’s left button, unless otherwise stated. See also double-click.
CMOS: Complementary Metal-Oxide Semiconductor. An electronic circuit
fabricated on a silicon wafer that requires very little power. Integrated circuits
implemented in CMOS technology can be tightly packaged and are highly
reliable.
cold start: Starting a computer that is currently off (turning on the power).
COM1, COM2, COM3 and COM4: The names assigned to the serial and
communication ports.
commands: Instructions you enter at the terminal keyboard that direct the actions
of the computer or its peripheral devices.
Glossary-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
compatibility: 1) The ability of one computer to accept and process data in the
same manner as another computer without modifying the data or the media
upon which it is being transferred. 2) the ability of one device to connect to or
communicate with another system or component.
components: Elements or parts (of a system) which make up the whole (system).
computer program: A set of instructions written for a computer that enable it to
achieve a desired result.
computer system: A combination of hardware, software, firmware, and peripheral
components assembled to process data into useful information.
configuration: The specific components in your system (such as the terminal,
printer, and disk drives) and the settings that define how your system works.
You use the HW Setup program to control your system configuration.
controller: Built-in hardware and software that controls the functions of a specific
internal or peripheral device (e.g. keyboard controller).
CPU: Central Processing Unit. The portion of the computer that interprets and
executes instructions.
CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a
fluorescent screen-producing luminous spots. An example is the television set.
cursor: A small, blinking rectangle or line that indicates the current position on the
display screen.
D
data: Information that is factual, measurable or statistical that a computer can
process, store, or retrieve.
data bits: A data communications parameter controlling the number of bits (binary
digits) used to make up a byte. If data bits = 7 the computer can generate
128 unique characters. If data bits = 8 the computer can generate 256 unique
characters.
DC: Direct Current. Electric current that flows in one direction. This type of power
is usually supplied by batteries.
default: The parameter value automatically selected by the system when you or
the program do not provide instructions. Also called a preset value.
delete: To remove data from a disk or other data storage device. Synonymous
with erase.
device driver: A program (called a “driver”) that permits a computer to
communicate with a device.
dialog box: A window that accepts user input to make system settings or record
other information.
disable: To turn a computer option off. See also enable.
User’s Manual
Glossary-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
disk drive: The device that randomly accesses information on a disk and copies
it to the computer’s memory. It also writes data from memory to the disk. To
accomplish these tasks, the unit physically rotates the disk at high speed past
a read-write head.
disk storage: Storing data on magnetic disk. Data is arranged on concentric
tracks much like a phonograph record.
display: A CRT, LCD, or other image producing device used to view computer
output.
documentation: The set of manuals and/or other instructions written for the
users of a computer system or application. Computer system documentation
typically includes procedural and tutorial information as well as system
functions.
double click: To press and release the pointing device’s primary button rapidly
twice without moving the pointing device. In the Windows® operating system,
this refers to the pointing device’s left button, unless otherwise stated.
driver: A software program, generally part of the operating system, that controls a
specific piece of hardware (frequently a peripheral device such as a printer or
mouse).
DVD: An individual digital versatile (or video) disc. See also DVD-ROM.
DVD-R (+R, -R): A Digital Versatile Disc-Recordable disk can be written once and
read many times. The DVD-R drive uses a laser to read data from the disc.
DVD-RAM: A Digital Versatile Disc-Random Access Memory is a high capacity,
high performance disc that lets you store large volumes of data. The DVD-
ROM drive uses a laser to read data from the disc.
DVD-ROM: A Digital Versatile Disc-Read Only Memory is a high capacity, high
performance disc suitable for play back of video and other high-density files.
The DVD-ROM drive uses a laser to read data from the disc.
DVD-RW (+RW, -RW): A Digital Versatile Disc-ReWritable disc can be rewritten
many times.
E
echo: To send back a reflection of the transmitted data to the sending device.
You can display the information on the screen, or output it to the printer, or
both. When a computer receives back data it transmitted to a CRT (or other
peripheral device) and then transmits the data to printer, the printer is said to
echo the CRT.
enable: To turn on a computer option. See also disable.
erase: See delete.
escape: 1) A code (ASCII code 27), signaling the computer that what follows are
commands; used with peripheral devices such as printers and modems.
2) A means of aborting the task currently in progress.
Glossary-6
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
escape guard time: A time before and after an escape code is sent to the modem
which distinguishes between escapes that are part of the transmitted data,
and escapes that are intended as a command to the modem.
execute: To interpret and execute an instruction.
F
file: A collection of related information; a file can contain data, programs, or both.
fingerprint sensor: The fingerprint sensor compares and analyzes the unique
characteristics in a fingerprint.
firmware: A set of instructions built into the hardware which controls and directs a
microprocessor’s activities.
flash memory: Non-volatile memory that can be written to as well as read.
Information in flash memory remains whether or not the computer is receiving
power. This type of memory is used to retain your
fingerprint data: See also memory. Compare RAM and ROM.
floppy diskette: A removable disk that stores magnetically encoded data.
floppy diskette drive (FDD): An electromechanical device that reads and writes
to floppy diskettes.
folder: An icon in Windows used to store documents or other folders.
format: The process of readying a blank disk for its first use. Formatting
establishes the structure of the disk that the operating system expects before
it writes files or programs onto the disk.
function keys: The keys labeled F1 through F12 that tell the computer to perform
certain functions.
G
gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also
megabyte.
graphics: Drawings, pictures, or other images, such as charts or graphs, to
present information.
H
hard disk: A storage device composed of a rigid platter or platters that can be
magnetically coded with data. Hard disks hold much more information than
diskettes and are used for long-term storage of programs and data. The
primary (or only) hard disk in a computer is usually fixed, but some computers
have secondary hard disks that are removable. By default, the hard disk is
referred to as drive C.
User’s Manual
Glossary-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
hard disk drive (HDD): An electromechanical device that reads and writes a hard
disk. See also hard disk.
hardware: The physical electronic and mechanical components of a computer
system: typically, the computer itself, external disk drives, etc. See also
software and firmware.
hertz: A unit of wave frequency that equals one cycle per second.
host computer: The computer that controls, regulates, and transmits information
to a device or another computer.
hot key: The computer’s feature in which certain keys in combination with the
extended function key, FN, can be used to set system parameters, such as
speaker volume.
HW Setup: A TOSHIBA utility that lets you set the parameters for various
hardware components.
I
icon: A small graphic image displayed on the screen or in the indicator panel. In
Windows, an icon represents an object that the user can manipulate.
input: The data or instructions you provide to a computer, communication device
or other peripheral device from the keyboard or external or internal storage
devices. The data sent (or output) by the sending computer is input for the
receiving computer.
instruction: Statements or commands that specify how to perform a particular
task.
interface: 1) Hardware and/or software components of a system used specifically
to connect one system or device to another.
2) To physically connect one system or device to another to exchange
information.
3) The point of contact between user, the computer, and the program, for
example, the keyboard or a menu.
I/O: Input/output. Refers to acceptance and transfer of data to and from a
computer.
I/O devices: Equipment used to communicate with the computer and transfer
data to and from it.
K
K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to
1024, or 2 raised to the 10th power. See also byte and kilobyte.
keyboard: An input device containing switches that are activated by manually
pressing marked keys. Each keystroke activates a switch that transmits a
specific code to the computer. For each key, the transmitted code is, in turn,
representative of the (ASCII) character marked on the key.
kilobyte (KB): A unit of data storage equal to 1024 bytes. See also byte and
megabyte.
Glossary-8
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
L
L1 cache: Level one cache. Memory cache built into the processor to help
improve processing speed. See also cache memory, L2 cache.
L2 cache: Memory cache installed on the motherboard to help improve
processing speed. It is slower than L1 cache and faster than main memory.
See also cache memory, L1 cache.
LAN: A group of computers or other devices dispersed over a relatively limited
area and connected by a communications link that enables any device to
interact with any other on the network.
Light Emitting Diode (LED): A semiconductor device that emits light when a
current is applied.
Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass
coated with transparent conducting material. The viewing-side coating is
etched into character forming segments with leads that extend to the edge of
the glass. Applying a voltage between the glass sheets.
M
main board: See motherboard.
megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte.
megahertz: A unit of wave frequency that equals 1 million cycles per second. See
also hertz.
memory: Typically refers to the computer’s main memory, where programs are
run and data is temporarily stored and processed. Memory can be volatile and
hold data temporarily, such as RAM, or it can be nonvolatile and hold data
permanently, such as ROM. A computer’s main memory is RAM. See RAM,
ROM.
menu: A software interface that displays a list of options on the screen. Also
called a screen.
microprocessor: A hardware component contained in a single integrated circuit
that carries out instructions. Also called the central processing unit (CPU), one
of the main parts of the computer.
mode: A method of operation, for example, the Boot Mode, Sleep Mode or the
Hibernation Mode.
modem: Derived from modulator/demodulator, a device that converts (modulates)
digital data for transmission over telephone lines and then converts modulated
data (demodulates) to digital format where received.
monitor: A device that uses rows and columns of pixels to display alphanumeric
characters or graphic images. See also CRT.
User’s Manual
Glossary-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
motherboard: A name sometimes used to refer to the main printed circuit board in
processing equipment. It usually contains integrated circuits that perform the
processor’s basic functions and provides connectors for adding other boards
that perform special functions.
N
network: A collection of computers and associated devices that are connected by
communications facilities. A network allows you to share data and peripheral
devices, such as printers, with other users and to exchange electronic mail.
non-system disk: A disk for storing programs and data that cannot be used to
start the computer. Compare system disk.
nonvolatile memory: Memory that is capable of permanently storing information.
Turning the computer’s power off does not alter data stored in nonvolatile
memory.
numeric keypad overlay: A feature that allows you to use certain keys on the
keyboard to perform numeric entry, or to control cursor and page movement.
O
OCR: Optical Character Recognition (reader). A technique or device that uses
laser or visible light to identify characters and input them into a storage device.
online state: A functional state of a peripheral device when it is ready to receive
or transmit data.
operating system: A group of programs that controls the basic operation of a
computer. Operating system functions include interpreting programs, creating
data files, and controlling the transmission and receipt (input/output) of data to
and from memory and peripheral device.
output: The results of a computer operation. Output commonly indicates data.
1) printed on paper, 2) displayed at a terminal, 3) sent through the serial port
of internal modem, or 4) stored on some magnetic media.
P
parallel: Processes that occur simultaneously. In communications, it means the
transmission of more than one bit of information at a time. On your computer,
the parallel port provides a parallel communications interface between the
computer and an appropriate device. Compare serial.
parity: 1) The symmetrical relationship between two parameter values
(integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial
communications, an error detection bit that is added to a group of data bits
making the sum of the bits even or odd. Parity can be set to none, odd, or
even.
Glossary-10
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
password: A unique string of characters used to identify a specific user. The
computer provides various levels of password protection such as user and
supervisor.
PC card: A credit-card-sized expansion card designed to increase the capabilities
of notebook computers. PC Cards provide functions such as modem, fax/
modem, hard disk drive, network adapter, sound card, or SCSI adapter.
PCI: Peripheral Component Interconnect. An industry standard 32-bit bus.
peripheral: Any device, such as a printer or joystick, that is attached to the
computer and controlled by the computer’s CPU.
pixel: A picture element. The smallest dot that can be made on a display or
printer. Also called a pel.
plug and play: A capability with Windows that enables the system to
automatically recognize connections of external devices and make the
necessary configurations in the computer.
pointing device: Any device, such as the TouchPad or a mouse, that enables you
to move the cursor on the screen.
port: The electrical connection through which the computer sends and receives
data to and from devices or other computers.
Power Saver: A TOSHIBA utility that lets you set the parameters for various
power-saving functions.
program: A set of instructions a computer can execute that enables it to achieve
a desired result. See also application.
prompt: A message the computer provides indicating it is ready for or requires
information or an action from you.
R
Radio frequency interference (RFI) shield: A metal shield enclosing the
printed circuit boards of the printer or computer to prevent radio and TV
interference. All computer equipment generates radio frequency signals. The
FCC regulates the amount of signals a computing device can allow past its
shielding. A Class A device is sufficient for office use. Class B provides a more
stringent classification for home equipment use. TOSHIBA portable computers
comply with Class B computing device regulations.
Random Access Memory (RAM): Volatile memory that can be written to as well
as read. Volatile here means that information in RAM is lost when you turn
off your computer. This type of memory is used for your computer’s main
memory. See also memory. Compare ROM.
User’s Manual
Glossary-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
resolution: A measure of the sharpness of the images that can be produced by a
printer or displayed on a screen. For a printer, resolution is expressed in dots
per inch (dpi). For a screen, it is expressed as the number of pixels available
horizontally and vertically
restart: Resetting a computer without turning it off (also called “warm boot”, “soft
reset” or “reboot”). See also boot.
RGB: Red, green, and blue. A device that uses three input signals, each activating
an electron gun for a primary additive color (red, green, and blue) or port for
using such a device. See also CRT.
RJ45: A modular LAN jack.
Read Only Memory (ROM): Non-volatile memory that can be read but not written
to. Non-volatile here means that information in ROM remains whether or not
the computer is receiving power. This type of memory is used to store your
computer’s BIOS, which is essential instructions the computer reads when you
start it up. See also BIOS, memory. Compare RAM.
S
S/P DIF: A standard of digital interface for audio.
SCSI: Small Computer System Interface is an industry standard interface for
connection of a variety of peripheral devices.
SD/SDHC Card: Secure Digital cards are flash memory widely used in a variety of
digital devices such as digital cameras and Personal Digital Assistants.
serial: Processes that occur one at a time. In communications, it means the
transmission of one bit at a time sequentially over a single channel. On your
computer, the serial port provides a serial interface between the computer and
an appropriate device. Compare parallel.
SIO: Serial Input/Output. The electronic methodology used in serial data
transmission.
soft key: Key combinations that emulate keys on the IBM keyboard, change
some configuration options, stop program execution, and access the numeric
keypad overlay.
software: The set of programs, procedures and related documentation associated
with a computer system. Specifically refers to computer programs that direct
and control the computer system’s activities. See also hardware.
stop bit: One or more bits of a byte that follow the transmitted character or group
codes in asynchronous serial communications.
system disk: A diskette that contains the operating system files needed to start
the computer. Any diskette can be formatted as a system disk. A system disk
is also called a “bootable disk”, “boot disk” or a “startup disk.” Compare non-
system disk.
Glossary-12
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
T
terminal: A typewriter-like keyboard and CRT display screen connected to the
computer for data input/output.
TFT display: A liquid crystal display (LCD) made from an array of liquid crystal
cells using active-matrix technology with thin film transistor (TFT) to drive each
cell.
Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest.
U
USB: Universal Serial Bus. This serial interface lets you communicate with several
devices connected in a chain to a single port on the computer.
V
VGA: Video Graphics Array is an industry standard video adaptor that lets you run
any popular software.
volatile memory: Random access memory (RAM) that stores information as long
as power is supplied to the computer.
W
warm start: Restarting or resetting a computer without turning it off.
Wi-Fi®: A registered trademark term of the Wi-Fi Alliance that stands for Wireless
Fidelity, and is another term for the communication protocol to permit an
Ethernet connection using wireless communication components.
window: A portion of the screen that can display its own application, document or
dialog box. Often used to mean a Microsoft Windows window.
Wireless LAN: Local Area Network (LAN) through wireless communication.
Wireless WAN: Wide Area Network (WAN) through wireless communication.
write protection: A method for protecting a floppy diskette from accidental
erasure.
User’s Manual
Glossary-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Glossary-14
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA
Index
Corel DVD MovieFactory for
TOSHIBA
A
AC adaptor, 2-14
additional, 8-11
using, 4-30
connecting, 3-2
ASCII characters, 5-7
D
Display, 1-6
automatic power off, 1-9
controller, 1-6
opening, 3-4
B
Battery, 6-3
charging, 6-6
Display Controller, B-1
Documentation list, 1-2
DVD Super Multi Double Layer drive
problems, 9-10
extending life, 6-9
monitoring capacity, 6-7
problems, 9-6
using, 4-17
save mode, 1-10
types, 6-3
E
additional, 8-11
Equipment checklist, 1-1
eSATA/USB Combo Port, 2-3
ExpressCard, 8-2
replacing, 6-9
Bluetooth, 1-8
inserting, 8-2
Bluetooth Stack for Windows by
TOSHIBA, 4-41
problems, 9-19
removing, 8-3
Boot Priority, 7-2
problems, 9-17
C
F
Cleaning the computer, 4-44
Cooling Vents, 2-3
Fingerprint Sensor, 2-11
problems, 9-19
User’s Manual
Index-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
using, 4-2
Number Lock, 5-4
Output, 5-3
Power plan, 5-3
Scroll Lock, 5-4
Sleep, 5-3
TOSHIBA Zooming
Utility (enlarge), 5-5
TOSHIBA Zooming
Utility (reduce), 5-4
Wireless, 5-4
Floppy diskette care, 4-34
Fn+1(TOSHIBA Zooming
Utility reduce), 5-4
Fn+2 (TOSHIBA Zooming
Utility enlarge), 5-5
Fn+ESC(Mute), 5-3
Fn+F1(Lock), 5-3
Fn+F10 (Enable Keypad), 5-4
Fn+F11 (Number Lock), 5-4
Fn+F12 (Scroll Lock), 5-4
Fn+F2(Power plan), 5-3
Fn+F3 (Sleep), 5-3
Zoom, 5-4
accessing, 7-1
Boot Priority, 7-2
display, 7-2
Fn+F4 (Hibernate), 5-3
Fn+F5 (Output), 5-3
Fn+F6 (Brightness decreases), 5-4
Fn+F7 (Brightness increases), 5-4
Fn+F8 (Wireless), 5-4
Fn+space (Zoom), 5-4
Fn+Z (Keyboard Backlight), 5-5
Fn Sticky key, 5-5
general, 7-1
keyboard, 7-3
LAN, 7-3
password, 7-2
USB, 7-3
Function keys, 5-2
K
Keyboard, 5-1
G
emulating enhanced keyboard, 5-2
F1 ... F12 function keys, 5-2
Fn Sticky key, 5-5
Graphics Controller, 1-6
hot keys, 5-3
problems, 9-8
typewriter keys, 5-1
H
Hard disk drive, 1-4
automatic power off, 1-9
Windows® special keys, 5-5
Keypad overlay, 5-6
Numeric mode, 5-6
temporarily using normal keyboard
(overlay on), 5-7
Brightness decreases, 5-4
Brightness increases, 5-4
Enable Keypad, 5-4
Hibernate, 5-3
Keyboard Backlight, 5-5
Lock, 5-3
turning on the overlays, 5-6
L
LAN, 4-42
Mute, 5-3
cable types, 4-43
Index-2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
connecting, 4-43
disconnecting, 4-44
jack, 2-5
panel power off/on, 6-12
Shut Down mode (Boot mode),
problems, 9-18
Sleep Mode, 3-6
system auto off, 6-12
turning off, 3-6
M
turning on, 3-5
Media care, 4-33
Power-up modes, 6-12
Problems
CD/DVDs, 4-33
Floppy diskettes, 4-34
Memory card care, 8-7
Memory, 1-3
AC power, 9-5
analyzing, 9-2
battery, 9-6
expansion, 8-7
installing, 8-5
DVD Super Multi Double Layer
drive, 9-10
removing, 8-6
Memory cards, 8-4
Modem, 4-37
ExpressCard, 9-19
Fingerprint Sensor, 9-19
Hard disk drive, 9-9
Keyboard, 9-8
connecting, 4-39
disconnecting, 4-39
properties menu, 4-38
region selection, 4-37
Moving the computer, 4-44
LAN, 9-18
LCD panel, 9-9
Memory expansion, 9-16
Modem, 9-17
Monitor, 9-17
Pointing device, 9-13
Real Time Clock, 9-8
Recovery Discs, 9-10
SD/SDHC memory card, 9-12
Sound system, 9-17
USB, 9-14
O
using, 4-17
USB floppy diskette drive, 9-12
Wireless LAN, 9-18
P
Password
power on, 1-9
R
Starting the computer by, 6-11
Ports, 1-6
Recovery Discs, 3-11
problems, 9-10
Recovery HDD, 3-11
Restarting the computer, 3-10
Power
conditions, 6-1
Hibernation Mode, 3-8
indicators, 6-2
User’s Manual
Index-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
TOSHIBA Zooming Utility, 1-12
TouchPad
S
location, 2-10
using, 4-1
Security lock, 8-13
Sleep Mode
setting, 3-6
system automatic, 1-9
Slot-Loading ODD, 2-5
inserting, 4-21
U
USB devices
problems, 9-14
removing, 4-22
Soft keys, 5-2
Sound system, 4-35
headphone jack, 2-3
microphone jack, 2-3
problems, 9-17
V
Video RAM, 1-3
Volume Button, 2-10
Volume Button, 2-10
W
Web Camera, 2-10
using, 4-12
T
Wireless Communication Switch,
TOSHIBA Accessibility, 1-12
TOSHIBA Assist, 1-13
TOSHIBA Button Support, 1-12
TOSHIBA Components Common
Driver, 1-12
TOSHIBA ConfigFree, 1-16
TOSHIBA Disc Creator, 1-15
TOSHIBA DVD-RAM Utility, 1-15
TOSHIBA Face Recognition, 1-14
TOSHIBA Flash Cards, 1-12
TOSHIBA HDD Protection, 4-45
TOSHIBA Power Saver, 1-12
TOSHIBA support, 9-20
TOSHIBA USB Sleep and Charge
problems, 9-15
TOSHIBA Value Added Package,
Index-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
|