Before Use >
4
Before Use
Congratulations on your purchase of this VAIO® computer and welcome to the on-screen User Guide. Sony has combined
leading-edge technology in audio, video, computing, and communications to provide you with a state-of-the-art computing
experience.
!
External views illustrated in this manual may look slightly different from those of your computer.
How to find specifications
Some features, options, and supplied items may not be available on your computer.
To find out about the configuration of your computer, visit the VAIO Support web site at http://support.vaio.sony.eu/.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use >
Finding More about Your VAIO Computer
5
Finding More about Your VAIO Computer
This section provides support information about your VAIO computer.
1. Printed Documentation
❑ Quick Start Guide — An overview of components connection, set-up information, etc.
❑ Recovery, Backup and Troubleshooting Guide
❑ Safety Regulations and Support Information
✍
Before activating the wireless functions such as the wireless LAN and BLUETOOTH technology, read the Safety Regulations and Support Information
carefully.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use >
Finding More about Your VAIO Computer
6
2. On-screen Documentation
❑ VAIO User Guide — General information of your VAIO computer including support and troubleshooting information.
To access VAIO User Guide, click Start , All Programs, and VAIO Manual.
❑ Windows Help and Support — A comprehensive resource for practical advice, tutorials, and demonstrations to help you
learn to use your computer.
To access Windows Help and Support, click Start and Help and Support, or press and hold the Microsoft Windows
key and press the F1 key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use >
Finding More about Your VAIO Computer
7
3. Support Web Sites
If you experience any problem with your VAIO computer, launch the VAIO Care, which offers you various options to help you
When you contact VAIO Support, you will be asked for the serial number of the computer.
The serial number is a 15-digit number that can be found at the bottom of the VAIO Care window; on the bottom or the back
panel of the computer; or inside the battery compartment.
Other sources for information about the VAIO computer are:
❑ The VAIO Forum at http://www.sony.eu/discussions/community/en/support/vaio_and_computing/, which enables you to
interact with other VAIO users in VAIO social community.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use >
Ergonomic Considerations
8
Ergonomic Considerations
You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt
to take account of the following ergonomic considerations for both stationary and portable environments:
❑ Position of your computer – Place the computer directly in front of you. Keep your forearms horizontal, with your wrists
in a neutral, comfortable position while using the keyboard or the pointing device. Let your upper arms hang naturally at
your sides. Take frequent breaks while using your computer. Excessive use of the computer may strain eyes, muscles, or
tendons.
❑ Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the
floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning
far backwards.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use >
Ergonomic Considerations
9
❑ Viewing angle of the computer display – Use the display tilting feature to find the best position. You can reduce eye
strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display
as well.
❑ Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect
lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency.
❑ Positioning an external display – When using an external display, set the display at a comfortable viewing distance.
Make sure the display screen is at or slightly below eye level when you are sitting in front of the monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
10
Getting Started
This section describes how to get started using your VAIO computer.
!
Before starting your computer for the first time, do not connect any other hardware that did not originally come with your computer. Upon completion,
connect one device (for example, a printer, an external hard disk drive, a scanner, and so on) at a time, following the manufacturer's instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Locating Controls and Ports
11
Locating Controls and Ports
Take a moment to identify the controls and ports shown on the following pages.
!
The appearance of your computer may be different from those illustrated in this manual due to variations in specifications.
Front
Measures ambient light intensity for automatically adjusting the
LCD brightness to an optimum level.
L Built-in speakers (stereo)
M Power button
Illuminates depending on the computer's operating mode (page
32).
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Locating Controls and Ports
12
*1
K Built-in microphone (monaural)
*2
L Numeric keypad
Use the numeric keypad to type numbers or to perform basic
math calculations.
*1
*2
On selected models only.
On VPCSE Series only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Locating Controls and Ports
14
Right
The location of the ports and slots on the right side of your computer is
different depending on the model you purchased. VPCSA or VPCSB
Series is illustrated at the top and VPCSE Series is illustrated at the
bottom of the enlarged illustrations.
*1
C Security slot
*2
*2
*3
*4
*2
*2
*1
Your computer supports only Duo-size "Memory Stick".
*2
Not accessible when your computer is attached to the port replicator.
*3
Compliant with the USB 2.0/3.0 standards. USB ports that are compliant
with the USB 3.0 standard are identifiable by their blue color.
*4
Compliant with the USB 2.0 standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Locating Controls and Ports
16
Bottom (with the bottom cover)
A Air vents
*1
C Extended battery pack connector cover
*2
F Bottom cover
*1
For detailed instructions on how to attach an extended battery pack, see the
manual that came with your extended battery pack.
While the extended battery pack is attached to your computer, be sure to
keep the removed connector cover for future use.
*2
On selected models only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
About the Indicator Lights
18
About the Indicator Lights
Your computer is equipped with the following indicator lights:
Indicator
Charge
Functions
Illuminates while the battery pack is charging. See Charging the Battery Pack (page 27) for more information.
Built-in camera
Media access
Illuminates while the built-in camera is in use.
Illuminates while data access to a memory card, such as "Memory Stick" and an SD memory card, is in
progress. (Do not place the computer into Sleep mode or turn it off while this indicator light is lit.) When the
indicator light is unlit, the memory card is not in use.
Illuminates while data access to the built-in storage device or the optical disc drive is in progress. Do not place
the computer into Sleep mode or turn it off while this indicator light is lit.
Disc drive
Num lock
Illuminates during Num lock mode. In this mode, you can use the numeric keys to type numbers or to perform
basic math calculations. To activate Num lock mode, press the Fn+Num Lk keys on models without the numeric
keypad or the Num Lk key on models with the numeric keypad. To deactivate Num lock mode, press the key(s)
a second time. The indicator light turns off.
Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key
while the indicator light is lit. Press the key a second time to turn off the indicator light. Normal typing resumes
when the Caps lock indicator light is turned off.
Caps lock
Press the Fn+Scr Lk keys to change how you scroll the display. Normal scrolling resumes when the Scroll lock
indicator light is turned off. The Scr Lk key functions differently depending on the program you are using and
does not work with all programs.
Scroll lock
WIRELESS
Illuminates while one or more wireless options are enabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Connecting a Power Source
19
Connecting a Power Source
You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer. Before using the
computer for the first time, you need to connect an AC adapter to your computer.
!
Do not use your computer without installing the battery pack as it may cause the computer to malfunction.
Using the AC Adapter
While your computer is directly connected to an AC power source and has a battery pack installed, it uses power from the
AC outlet.
✍
Use only the supplied AC adapter for your computer.
To use the AC adapter
1
2
3
Plug one end of the power cord (1) into the AC adapter (3).
Plug the other end of the power cord into an AC outlet (2).
Plug the cable from the AC adapter (3) into the DC IN port (4) on the computer.
!
The shape of the DC In plug varies depending on the AC adapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Connecting a Power Source
20
✍
To disconnect your computer completely from an AC power source, unplug the AC adapter from the AC outlet.
Make sure that an AC outlet is easily accessible.
If you do not intend to use your computer for an extended period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page
34).
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
21
Using the Battery Pack
The battery pack is already installed on your computer at the time of delivery but is not fully charged.
!
Do not use your computer without installing the battery pack as it may cause the computer to malfunction.
Installing/Removing the Battery Pack
✍
In order to distinguish the battery pack which is installed on your computer at the time of delivery from an extended battery pack (supplied with selected
models only), it may be referred to as the primary battery pack in this manual.
For detailed instructions on how to attach and charge an extended battery pack, see the manual that came with your extended battery pack.
To install the battery pack
1
2
Turn off the computer, close the LCD screen lid, and unplug the AC adapter.
Unscrew the two screws (1), slide the bottom cover in the direction of the arrow (2), and remove the cover.
!
Be careful not to lose the removed screws.
Be careful not to touch the wires and the projections inside the bottom cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
23
5
Replace the cover. Make sure all the tabs on the cover are slid in place and push the cover in the direction of the arrow.
There are five tabs on VPCSA and VPCSB Series and six tabs on VPCSE Series.
6
Replace and tighten the removed screws.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
24
To remove the battery pack
!
You will lose all unsaved data if you remove the battery pack while your computer is on and not connected to the AC adapter.
1
2
Turn off the computer, close the LCD screen lid, and unplug the AC adapter if plugged.
Unscrew the two screws (1), slide the bottom cover in the direction of the arrow (2), and remove the cover.
!
Be careful not to lose the removed screws.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
25
3
Pull and hold the tab in the direction of the arrow (3) and pull the battery pack in the direction of the arrow (4).
4
Slide the battery pack away from the computer in the direction of the arrow.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
26
✍
If your computer does not recognize the battery pack, turn off your computer and push and hold the battery off button for about three seconds with a
thin, straight object (such as a paper clip). If this does not solve the problem, remove the battery pack and install it once again.
If an extended battery pack is attached to the computer, turn off the computer and remove the extended battery pack. If this does not solve the problem,
push and hold the battery off button for about three seconds. If the problem persists, remove both battery packs and install them once again.
!
For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance
standard, supplied by Sony for your VAIO computer. Some VAIO computers may only function with a genuine Sony battery pack.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
27
Charging the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
To charge the battery pack
1
2
Install the battery pack.
Connect the computer to a power source with the AC adapter.
The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum
charge level you selected, the charge indicator turns off.
Charge indicator status
Meaning
Lit in orange
The battery pack is charging.
Blinks along with the green
power indicator
The battery pack is running out of power.
(Normal mode)
Blinks along with the orange
power indicator
The battery pack is running out of power.
(Sleep mode)
Blinks fast in orange
A battery error has occurred due to a failed battery
pack or an unlocked battery pack.
!
Charge the battery pack as described in this manual from your first battery charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
28
✍
Keep the battery pack in your computer while it is directly connected to an AC power source. The battery pack continues to charge while you are using
the computer.
When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to
recharge the battery pack or shut down your computer and install a fully charged battery pack.
Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect
the life of battery.
While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life
becomes short. To avoid loss of data while the computer is running on the battery, you should save your data frequently and manually activate a power
management mode, such as Sleep or Hibernate.
If the battery pack runs out of power while the computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is
impossible. To avoid loss of data, you should save your data frequently.
About the use of an extended battery pack
❑ If an extended battery pack is attached to your computer, the primary battery pack is charged first up to about 80% of its
battery capacity. Then, the extended battery pack starts charging up to about 80%. After both battery packs are charged
up to about 80%, the primary battery pack starts charging to 100%. Then, the extended battery pack starts charging to
100%.
❑ If an extended battery pack is attached to your computer, battery power of the extended battery pack is used first. Battery
power of the primary battery pack will be used after the extended battery pack runs out of power.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
29
Checking the Battery Charge Capacity
The battery charge capacity gradually decreases as the number of battery charging increases or the duration of use of the
battery pack extends. To get the most out of the battery pack, check the battery charge capacity and change the battery
settings.
To check the battery charge capacity
1
2
Click Start, All Programs, and VAIO Control Center.
Click Power Management and Battery.
✍
Additionally, you can enable the battery care function to extend the life of the battery pack.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Battery Pack
30
Extending the Battery Life
When your computer is running on battery power, you can extend the battery life using the following methods.
❑ Decrease the LCD brightness of your computer screen.
❑ Change the power saving settings on the Power Options. See Using the VAIO Power Management (page 131) for more
information.
✍
For more information on how to extend the battery life, see the help file after following the steps in Checking the Battery Charge Capacity (page 29).
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Shutting Down Your Computer Safely
31
Shutting Down Your Computer Safely
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.
To shut down your computer
1
2
3
Turn off any peripherals connected to the computer.
Save your data and close all running software applications.
Click Start and the Shut down button.
After a short time, the computer automatically turns off. Make sure the power indicator light turns off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Power Saving Modes
32
Using the Power Saving Modes
You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode,
your computer has two distinct power saving modes to suit your preference: Sleep and Hibernate.
!
If you do not intend to use your computer for an extended period of time while it is disconnected from an AC power source, place the computer into
Hibernate mode or turn it off.
If the battery pack runs out of power while your computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is
impossible. To avoid loss of data, you should save your data frequently.
Mode
Description
Normal mode
This is the normal state of your computer while it is in use. The green power indicator light is lit while the
computer is in this mode.
Sleep mode
Sleep mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power
consumption mode. The orange power indicator light blinks slowly while your computer is in this mode. Your
computer comes out of Sleep mode quicker than out of Hibernate mode. However, Sleep mode uses more
power than Hibernate mode.
Hibernate mode
While your computer is in Hibernate mode, the state of the system is saved on the built-in storage device(s) and
power is turned off. Even when the battery pack runs out of power, no data will be lost. The power indicator light
is unlit while your computer is in this mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Power Saving Modes
33
Using Sleep Mode
To activate Sleep mode
Click Start, the arrow
next to the Shut down button, and Sleep.
To return to Normal mode
❑ Press any key.
❑ Press the power button on your computer.
!
If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Using the Power Saving Modes
34
Using Hibernate Mode
To activate Hibernate mode
Press the Fn+F12 keys.
Alternatively, you can click Start, the arrow next to the Shut down button, and Hibernate.
!
Do not move your computer before its power indicator light turns off.
To return to Normal mode
Press the power button.
!
If you press and hold the power button for more than four seconds, your computer will turn off automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Keeping Your Computer in Optimum Condition
35
Keeping Your Computer in Optimum Condition
Updating Your Computer
Be sure to update your VAIO computer with the following software applications for enhancing your computer's efficiency,
security, and functionality.
The VAIO Update automatically notifies you of new updates available on the Internet, and downloads and installs them on
the computer.
❑ Windows Update
Click Start, All Programs, and Windows Update and then follow the on-screen instructions.
❑ VAIO Update
Click Start, All Programs, VAIO Care, VAIO Software, and VAIO Update.
!
Your computer must be connected to the Internet to download the updates.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Keeping Your Computer in Optimum Condition
36
Using the Antivirus Software for Your Computer
Protect your computer against computer viruses by using the antivirus software.
You can keep the antivirus software current with the latest updates by downloading and installing the updates from the web
site of the manufacturer. To update the antivirus software, find the antivirus software installed on your computer from the
following and follow the steps.
!
Your computer must be connected to the Internet to download the updates.
❑ Trend Micro:
1
Click Start, All Programs, Trend Micro Titanium Maximum Security 2012, and Trend Micro Titanium Maximum
Security 2012.
2
Follow the on-screen instructions.
❑ McAfee:
1
2
Click Start, All Programs, McAfee, and McAfee Internet Security or McAfee Total Protection.
Follow the on-screen instructions.
❑ Norton Internet Security:
1
2
Click Start, All Programs, Norton Internet Security, and LiveUpdate or Norton Internet Security.
Follow the on-screen instructions.
✍
See the help file included with your software program for more information.
!
The actual procedure may be different from the above depending on the version of the software installed on your computer. In such a case, follow the
on-screen instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started >
Keeping Your Computer in Optimum Condition
37
Using the VAIO Care
With the VAIO Care, you can regularly conduct performance checks and tune-ups on your computer to keep it running at an
optimum level. Launch the VAIO Care whenever a problem is found on your computer. The VAIO Care will provide
appropriate measures to solve the problem.
To launch the VAIO Care
Press the ASSIST button while your computer is on.
✍
See the help file included with the VAIO Care for more information.
Pressing the ASSIST button while the computer is off launches the VAIO Care Rescue. The VAIO Care Rescue can be used to recover your computer
in case of emergency, for example, when the Windows does not start.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Keyboard
39
Using the Keyboard
Your keyboard has additional keys that perform model-specific tasks.
Combinations and Functions with the Fn Key
✍
Some keyboard functions can be used only after the operating system is finished launching.
Combination/Feature
Function
Disables and enables the touch pad.
Fn +
(F1): touch pad operation
Fn + % (F2): muting
Fn + 2 (F3/F4): volume control
Turns on and off the built-in speakers or the headphones.
Changes the volume level.
To increase the volume, press the Fn+F4 keys and then the M or , key, or keep pressing the
Fn+F4 keys.
To decrease the volume, press the Fn+F3 keys and then the m or < key, or keep pressing the
Fn+F3 keys.
Fn + 8 (F5/F6): brightness control
Changes the LCD brightness of your computer screen.
To increase lighting intensity, keep pressing the Fn+F6 keys or press the Fn+F6 keys and then
the M or , key.
To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then
the m or < key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Keyboard
40
Combination/Feature
Function
Switches the display output between your computer screen and an external display. Press the
Enter key to select the display output.
Fn +
/T (F7): display output
!
If you disconnect a display cable from your computer while an external display is selected as the display
output destination, the computer screen goes blank. In such a case, press the F7 key twice while holding
down the Fn key, and then press the Enter key to switch the display output to the computer screen.
Use of multiple monitors may not be supported depending on the connected external display.
Changes the size of an image or a document displayed on some software.
To make the view look smaller and further away (zoom out), press the Fn+F9 keys.
To make the view look bigger and closer (zoom in), press the Fn+F10 keys.
See the help file included with the VAIO Control Center for more information.
Fn +
/
(F9/F10): zooming
Provides the lowest level of power consumption. When you execute this command, the states
of the system and the connected peripheral devices are saved to the built-in storage device and
the system power is turned off. To return the system to its original state, use the power button
to turn on the power.
Fn +
(F12): hibernation
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Keyboard
41
Changing the Backlit Keyboard Settings
If your computer is equipped with a backlit keyboard, you can set the keyboard light to automatically turn on and off according
to ambient light intensity.
Additionally, you can set a time period to turn off the keyboard backlight after inactivity of keyboard operations.
To change the backlit keyboard settings
1
2
Click Start, All Programs, and VAIO Control Center.
Click Keyboard and Mouse and Backlit Keyboard.
✍
Ambient light intensity is measured by the ambient light sensor. Blocking the ambient light sensor may turn on the keyboard backlight.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Touch Pad
42
Using the Touch Pad
You can point to, select, drag, and scroll objects on the screen using the touch pad.
Action
Point
Description
Slide your finger on the touch pad (1) to place the pointer (2) on an item or object.
Press the left button (3) once.
Click
Double-click
Right-click
Drag
Press the left button twice in a row.
Press the right button (4) once. With many applications, this action displays a context-sensitive shortcut menu (if any).
Slide your finger on the touch pad while pressing the left button.
Scroll
Slide your finger along the right edge of the touch pad to scroll vertically. Slide your finger along the bottom edge to scroll
horizontally. Once vertical or horizontal scrolling is engaged, you can move your finger in circles on the touch pad to
keep scrolling without taking the finger off the touch pad (the scroll function is available only with applications that
support a touch pad scroll feature).
Flick
Slide two fingers linearly in quick motion on the touch pad. On web browsers or image viewer software, you can flick left
to move backward and flick right to move forward.
Pinch
With some software applications, you can pinch on the touch pad with two fingers for zooming. Pinch open to zoom in
or pinch close to zoom out.
✍
You can disable/enable the touch pad by pressing the Fn+F1 keys. You can also use the VAIO Control Center to change the touch pad settings.
!
Be sure to connect a mouse before disabling the touch pad. If you disable the touch pad before connecting a mouse, you will be able to use only the
keyboard for pointer operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Special-function Buttons
43
Using Special-function Buttons
Your computer is equipped with special buttons to help you use specific functions of the computer.
Special-function button
Functions
ASSIST button
Launches the VAIO Care while the computer is on.
While the computer is off, the ASSIST button launches the VAIO Care Rescue. The VAIO Care Rescue can
be used to recover the computer in case of emergency, for example, when the Windows does not start. See
WEB button
While the computer is in Normal mode, the WEB button launches the web browser assigned to the button
by default.
While the computer is off, the WEB button activates the Quick Web Access function and launches the web
information.
!
The WEB button is not functional while the computer is in Sleep mode or Hibernate mode.
VAIO button
Executes the task that is assigned to the button by default.
You can change the default assignment with the VAIO Control Center.
Drive eject button
Ejects the optical disc drive tray.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Quick Web Access Function
44
Using the Quick Web Access Function
The Quick Web Access function enables you immediately to access the Internet without launching the Windows operating
system.
Some features and options in this section may not be available on your computer.
Activating the Quick Web Access Function
To activate the Quick Web Access function, your computer must be off.
To activate the Quick Web Access function
1
2
Press the WEB button on the computer.
Follow the instructions in the initial setup wizard.
Once you have completed the initial setup, the web browser used with the Quick Web Access function launches just by
pressing the WEB button from the next time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Quick Web Access Function
45
Exiting the Quick Web Access Function
!
To launch the Windows operating system, you first need to exit the Quick Web Access function.
To exit the Quick Web Access function, do any of the following:
❑ Click the
icon located at the lower left corner of the screen.
❑ Press the WEB button.
❑ Press the power button on the computer.
For detailed information on how to use or restrictions on the Quick Web Access function, click the
lower right corner of the screen.
icon located at the
Notes on Using the Quick Web Access Function
While the Quick Web Access function is activated, you cannot use:
❑ the ASSIST button.
❑ the Scr Lk key in combination with the Fn key for a shortcut.
❑ any port and jack except the DC IN port, the LAN port, the USB ports, and the headphones jack.
❑ the "Memory Stick Duo" slot and the SD memory card slot.
❑ the wireless WAN function (available on selected models only).
❑ the Intel® Wireless Display (installed on selected models only).
❑ the WiMAX function (available on selected models only).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Built-in Camera
46
Using the Built-in Camera
Your computer is equipped with a built-in camera.
With the communication software, such as Windows Live Messenger, you can make a video call through the Internet. For
detailed information on how to use the software, see the help file included with the software.
✍
The built-in camera indicator light illuminates while the built-in camera is in use.
The software installed on your computer varies depending on your computer's configurations.
To make a video call using Windows Live Messenger
1
Click Start, All Programs, and Windows Live Messenger.
✍
You need to sign in to Windows Live Messenger to make a video call.
To display images from the built-in camera
1
2
Click Start, All Programs, ArcSoft Webcam Suite, and WebCam Companion 4.
Click Capture.
✍
If you cannot capture images properly, for example captured images are not displayed smoothly, click the current resolution of the capturing image at
the upper right of the main window and lower the resolution.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Optical Disc Drive
47
Using the Optical Disc Drive
Your computer is equipped with a built-in optical disc drive.
Some features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
!
You cannot use optical discs if you disable the optical disc drive in the BIOS setup screen. To enable the drive, follow the steps in Disabling Built-in
To insert a disc
1
2
Turn on the computer.
Press the drive eject button (1) to open the drive.
The drive tray slides out.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Optical Disc Drive
48
3
Place a disc in the middle of the drive tray with the label side facing upward and gently push it down until the disc clicks
into place.
!
Do not exert pressure on the drive tray. Be sure to hold the bottom of the drive tray when placing/removing a disc onto/from the tray.
4
Close the drive tray by pushing it in gently.
!
Do not remove the optical disc while your computer is in a power saving mode (Sleep or Hibernate). Be sure to bring the computer back into Normal
mode before removing the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Optical Disc Drive
49
Supported Discs
Your computer plays and records CDs, DVDs, and Blu-ray Disc™ media, depending on the model you purchased.
See the reference chart below to find out which type of optical disc drive supports which types of media.
PR: playable and recordable
P: playable but not recordable
–: not playable or recordable
*3 *4
CD-ROM CD-R/RW DVD-ROM DVD-R/
RW
DVD+R/
RW
DVD+R DL DVD-R DL DVD-
BD-ROM
BD-R/RE
*1 *2
(Double
Layer)
(Dual
Layer)
RAM
*6
DVD SuperMulti Drive P
P
P
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
–
–
PR
*6
*5
Blu-ray Disc™ Drive
with DVD SuperMulti
P
P
P
PR
PR
*6
Blu-ray Disc™ ROM
Drive with
P
PR
PR
PR
PR
PR
P
P
PR
DVD SuperMulti
*1
The DVD SuperMulti Drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with a removable cartridge.
*2
Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM Version 1.0 is not supported.
DVD-RAM Version 2.2/12X-SPEED DVD-RAM Revision 5.0 disc is not supported.
*3
*4
*5
The Blu-ray Disc drive on your computer does not support BD-RE Disc media in Version 1.0 format and Blu-ray Disc media with a cartridge.
™
BDXL Disc media is not supported.
Supports writing data to BD-R Part1 Version 1.1/1.2/1.3 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB) and
BD-RE Part1 Version 2.1 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB).
*6
Writing data to Ultra Speed CD-RW discs is not supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Optical Disc Drive
50
!
This unit is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright
protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this unit.
When you buy pre-recorded or blank discs for use with your VAIO computer, be sure to read the notices on the disc package carefully to check both
playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee the compatibility of VAIO optical disc drives
with discs that are not compliant with the official "CD," "DVD," or "Blu-ray Disc" standard. USING NON-COMPLIANT DISCS CAN CAUSE FATAL DAMAGE
TO YOUR VAIO COMPUTER OR CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.
For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.
✍
8 cm disc writing is not supported.
!
To play copyright protected Blu-ray Disc media continually, update the AACS key. The AACS key update requires Internet access.
As with other optical media devices, circumstances may limit compatibility or prevent Blu-ray Disc media playback. VAIO computers may not support
movie playback on packaged media recorded in AVC or VC1 formats at high bit rates.
Region settings are required for some contents of DVD and BD-ROM Disc media. If the region setting on the optical disc drive does not match the
region coding on the disc, playback is not possible.
Unless your external display is compliant with the High-bandwidth Digital Content Protection (HDCP) standard, you cannot play or view the contents
of copyright protected Blu-ray Disc media.
Some content may restrict video output to standard definition or prohibit analog video output. When you output video signals through digital
connections, such as an HDMI connection, it is strongly recommended that a digital HDCP compliant environment be implemented for optimum
compatibility and viewing quality.
Exit all memory-resident utility software before playing or writing a disc as it may cause the computer to malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Optical Disc Drive
51
Notes on Using the Optical Disc Drive
Notes on writing data to a disc
❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc
drive.
❑ Do not strike or shake your computer while the optical disc drive is writing data to a disc.
❑ Do not plug or unplug the power cord or the AC adapter while the optical disc drive is writing data to a disc.
❑ Do not attach or disconnect your computer to or from the port replicator (optional) while the optical disc drive is writing
data to a disc.
Notes on playing discs
To achieve optimum performance of disc playback, you should follow these recommendations:
❑ Some CD players and computer optical disc drives may not be able to play audio CDs created with the CD-R or CD-RW
media.
❑ Some DVD players and computer optical disc drives may not be able to play DVDs created with the DVD+R DL, DVD-R
DL, DVD+R, DVD+RW, DVD-R, DVD-RW, or DVD-RAM media.
❑ When your computer is equipped with a Blu-ray Disc drive, Blu-ray Disc playback is available on your computer. However,
the drive may not be able to play some Blu-ray Disc content, or the computer may become unstable during Blu-ray Disc
playback. To play content normally, download and install the latest updates for Blu-ray Disc playback software using the
VAIO Update.
❑ Depending on system environment, you may find sound interruptions and/or dropped frames during AVC HD playback.
❑ Do not place your computer into either of the power saving modes while your computer is playing a disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Optical Disc Drive
52
Notes on region codes
Region code indicators are labeled on the discs or packages to indicate in which region and on what type of player you can
play the disc. If the region code indicates "all," you can play this disc in most regions of the world. If the region code for your
residence area is different from the label, you cannot play the disc on your computer.
To find out the region code for your residence area, see the following table.
Residence area
Africa
Region code
Residence area
Australia*
Region code
Residence area
China
Region code
5
2
3
2
3
3
3
4
3
2
3
5
2
2
6
5
3
4
2
3
3
Europe
Hong Kong*
Japan*
India*
Indonesia*
Kuwait*
Korea
Malaysia*
New Zealand*
Saudi Arabia*
Taiwan
Philippines*
Singapore*
Thailand*
Russia
South Africa*
United Arab Emirates*
Vietnam
*
A region code is not assigned to your computer's optical disc drive by default.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Optical Disc Drive
53
If it is your first time to play a DVD video on your computer, follow these steps before inserting the disc:
1
2
3
4
5
6
Click Start and Computer.
Right-click the optical disc drive icon and select Properties.
Click the Hardware tab.
Select your optical disc drive from the All disk drives list and click Properties.
Click the DVD Region tab.
Select an appropriate region from the list and click OK.
!
You can change the region code only a limited number of times. When you have exceeded this number, the drive's region code is permanently assigned
and you will not be able to change it again. Reconfiguring your computer does not reset this count.
Any difficulties caused by changing the region code settings of the drive are not covered by the warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Optical Disc Drive
54
Playing Discs
To play a disc
1
Insert a disc into the optical disc drive.
!
Connect the AC adapter to the computer and close all running software applications before playing a disc.
2
If nothing appears on the desktop, click Start, All Programs, and your desired software to play the disc.
For instructions on how to use the software, see the help file included with the software.
Copying Files to Discs
To copy files to a disc
1
Insert a recordable disc into the optical disc drive.
!
Connect the AC adapter to the computer and close all running software applications before copying files to a disc.
2
If nothing appears on the desktop, click Start, All Programs, and your desired disc burning software to copy files to the
disc.
For instructions on how to use the software, see the help file included with the software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using "Memory Stick"
55
Using "Memory Stick"
"Memory Stick" is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing
digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable,
it can be used for external data storage.
!
You cannot use "Memory Stick" if you disable the "Memory Stick Duo" slot in the BIOS setup screen. To enable the slot, follow the steps in Disabling
Before You Use "Memory Stick"
The "Memory Stick Duo" slot on your computer can accommodate the following sizes and types of media:
❑ "Memory Stick Duo"
❑ "Memory Stick PRO Duo"
❑ "Memory Stick PRO-HG Duo"
!
Your computer supports only Duo-size "Memory stick", and does not support standard-size "Memory Stick".
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using "Memory Stick"
56
Inserting and Removing "Memory Stick"
To insert "Memory Stick"
1
2
3
Locate the "Memory Stick Duo" slot.
Hold "Memory Stick" with the arrow pointing toward the slot.
Carefully slide "Memory Stick" into the slot until it clicks into place.
Do not force the media into the slot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using "Memory Stick"
57
✍
If "Memory Stick" does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
When you insert "Memory Stick" into the slot for the first time, you may be prompted to install driver software. If prompted, follow the on-screen
instructions to install the software.
"Memory Stick" is automatically detected by your system and the contents of "Memory Stick" are displayed. If nothing appears on the desktop, click
Start, Computer, and double-click the "Memory Stick" icon.
The "Memory Stick" icon will appear in the Computer window after you insert "Memory Stick" into the slot.
!
Before using "Memory Stick Micro" ("M2"), be sure to insert it into an "M2" Duo adaptor. If you insert the media directly into the "Memory Stick Duo"
slot without the adaptor, you may not be able to remove it from the slot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using "Memory Stick"
58
To remove "Memory Stick"
!
Do not remove "Memory Stick" while the media access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to load,
so make sure the indicator light is unlit before removing "Memory Stick".
1
2
3
Locate the "Memory Stick Duo" slot.
Check that the media access indicator light is unlit.
Push in "Memory Stick" toward the computer and release.
"Memory Stick" ejects.
4
Pull "Memory Stick" out of the slot.
!
Be sure to remove "Memory Stick" gently, or it may pop out unexpectedly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using "Memory Stick"
59
Formatting "Memory Stick"
To format "Memory Stick"
"Memory Stick" is formatted by default and is ready for use.
If you want to reformat the media with your computer, follow these steps.
!
Be sure to use the device that is designed to format the media and supports "Memory Stick" when formatting the media.
Formatting "Memory Stick" erases the entire data stored on the media. Before formatting the media, make sure that it does not contain your valuable
data.
Do not remove "Memory Stick" from the slot while formatting. This could cause a malfunction.
Locate the "Memory Stick Duo" slot.
1
2
3
4
5
Carefully slide "Memory Stick" into the slot until it clicks into place.
Click Start and Computer.
Right-click the "Memory Stick" icon and select Format.
Click Restore device defaults.
!
The size of the allocation unit and file system may change.
Do not select NTFS from the File system drop-down list as it may cause a malfunction.
✍
The formatting process will be completed more quickly if you select Quick Format in Format options.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using "Memory Stick"
61
Notes on Using "Memory Stick"
❑ Your computer has been tested and found compatible with Sony branded "Memory Stick" with capacity of up to 32 GB
that are available as of October 2011. However, not all "Memory Stick" are guaranteed of compatibility.
❑ Be sure to hold "Memory Stick" with the arrow pointing in the correct direction as you insert it into the slot. To avoid
damaging your computer or the media, do not force "Memory Stick" into the slot if you cannot insert it smoothly.
❑ Use care when inserting or removing "Memory Stick" from the slot. Do not force it in or out of the slot.
❑ Inserting "Memory Stick" with multiple conversion adaptors is not guaranteed of compatibility.
❑ "MagicGate" is the general name of the copyright protection technology developed by Sony. Use "Memory Stick" with the
"MagicGate" logo to take advantage of this technology. The "Memory Stick Duo" slot on your computer does not support
"MagicGate" technology of "Memory Stick" with capacity of up to 256 MB.
❑ Except for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior
consent from the respective copyright holders. Accordingly, "Memory Stick" with such copyrighted data can be used only
within the law.
❑ Do not insert more than one memory card into the slot. Improper insertion of the media may damage both your computer
and the media.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Other Modules / Memory Cards
62
Using Other Modules / Memory Cards
Using the SD Memory Card
Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras,
camcorders, music players, and other audio/video devices.
!
You cannot use SD memory cards if you disable the SD memory card slot in the BIOS setup screen. To enable the slot, follow the steps in Disabling
Before you use the SD memory card
The SD memory card slot on your computer can accommodate the following memory cards:
❑ SD memory card
❑ SDHC memory card
❑ SDXC memory card
For the latest information on compatible memory cards, see Finding More about Your VAIO Computer (page 5) to visit the
appropriate support web site.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Other Modules / Memory Cards
63
To insert an SD memory card
1
2
3
Locate the SD memory card slot.
Hold the SD memory card with the arrow pointing toward the slot.
Carefully slide the SD memory card into the slot until it clicks into place.
Do not force the card into the slot.
✍
When you insert the SD memory card into the slot for the first time, you may be prompted to install driver software. If prompted, follow the on-screen
instructions to install the software.
The SD memory card icon will appear in the Computer window after you insert the card into the slot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Other Modules / Memory Cards
64
To remove an SD memory card
1
2
3
Locate the SD memory card slot.
Check that the media access indicator light is unlit.
Push in the SD memory card toward the computer and release.
The SD memory card ejects.
4
Pull the SD memory card out of the slot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Other Modules / Memory Cards
65
Notes on Using Memory Cards
General notes on using the memory card
❑ Be sure to use memory cards that are compliant with the standards supported by your computer.
❑ Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid
damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.
❑ Use care when inserting or removing the memory card from the slot. Do not force it in or out of the slot.
❑ Do not remove the memory card while the media access indicator light is lit. If you do, you may lose data.
❑ Do not attempt to insert a memory card or memory card adaptor of a different type into the memory card slot. An
incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage
to your computer.
❑ Do not insert more than one memory card into the slot. Improper insertion of the media may damage both your computer
and the media.
Notes on using the SD memory card
❑ Your computer has been tested and found compatible only with major memory cards available as of October 2011.
However, not all memory cards are guaranteed of compatibility.
❑ SD memory cards (up to 2 GB), SDHC memory cards (up to 32 GB), and SDXC memory cards (up to 64 GB) have been
tested and found compatible with your computer.
❑ Some types of SD memory cards, for example ones with the UHS (Ultra High Speed data transfer feature), may become
extremely hot due to continuous access to the memory cards. In such a case, wait for a while before removing the memory
card until it cools down.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Internet
66
Using the Internet
Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for
connecting your computer to the Internet.
The following types of Internet connection services may be available from your ISP:
❑ Fiber to the Home (FTTH)
❑ Digital Subscriber Line (DSL)
❑ Cable modem
❑ Satellite
❑ Dial-up
For detailed information on devices required for Internet access and how to connect your computer to the Internet, ask your
ISP.
✍
To connect your computer to the Internet using the wireless LAN function, you need to set up the wireless LAN network. See Using the Wireless LAN
(page 68) for more information.
!
When you connect your computer to the Internet, be sure to take appropriate security measures to protect the computer against online threats.
Depending on the service contract with your ISP, you may need to connect an external modem device, for example a USB telephone modem, a DSL
modem, or a cable modem, to your computer to connect to the Internet. For detailed instructions on connection setups and modem configuration, see
the manual that came with your modem.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Network (LAN)
67
Using the Network (LAN)
You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with a LAN cable. Connect one end
of a LAN cable (not supplied) to the LAN port on the computer or the optional port replicator and the other end to your network.
For detailed settings and devices required for LAN access, ask your network administrator.
!
The LAN port on your computer is not accessible when the computer is attached to the optional port replicator.
You cannot access LAN networks if you disable the LAN port in the BIOS setup screen. To enable the port, follow the steps in Disabling Built-in Devices
✍
You can connect your computer to any network without changing the default settings.
!
Do not plug a telephone cable into the LAN port on your computer.
If the LAN port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage, overheating, or fire.
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)
- Public telephone subscriber line
- Private branch exchange (PBX)
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless LAN
68
Using the Wireless LAN
The Wireless LAN (WLAN) allows your computer to connect to a network through a wireless connection.
The WLAN uses the following IEEE 802.11a/b/g/n standard, which specifies the type of technology used.
See the specifications to find out about the configuration of your computer.
!
You cannot access wireless networks if you disable the wireless devices in the BIOS setup screen. To enable the devices, follow the steps in Disabling
WLAN standard
IEEE 802.11a
Frequency band
5 GHz
Remarks
Available only on models compliant with the IEEE 802.11a/b/g/n standard.
IEEE 802.11b/g
2.4 GHz
The IEEE 802.11g standard provides higher-speed communications than the IEEE 802.11b
standard.
IEEE 802.11n
5 GHz/2.4 GHz
On models compliant with the IEEE 802.11b/g/n standard, only the 2.4 GHz band can be used.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless LAN
69
Notes on Using the Wireless LAN Function
General notes on using the wireless LAN function
❑ In some countries or regions, using WLAN products may be restricted by the local regulations (e.g. limited number of
channels).
❑ The IEEE 802.11a standard and the IEEE 802.11n standard are not available on ad-hoc networks.
❑ The 2.4 GHz band, with which wireless LAN devices work, is used by various devices. Although the wireless LAN devices
use the technology to minimize radio interference from other devices that use the same band, such radio interference may
cause slower communication speeds and narrower communication ranges or communication failures.
❑ The communication speed and range may vary depending on the following conditions:
❑ Distance between communication devices
❑ Existence of obstacles between devices
❑ Device configuration
❑ Radio conditions
❑ Ambient environment that includes existence of walls and materials of such walls
❑ Software in use
❑ Communications may be cut off depending on radio conditions.
❑ Actual communication speed may not be as fast as the one displayed on your computer.
❑ Deploying WLAN products compliant with different standards that use the same band on the same wireless network may
reduce the communication speed due to radio interference. Taking this into consideration, WLAN products are designed
to reduce the communication speed to ensure communications with another WLAN product if it is compliant with a
different standard that uses the same band. When the communication speed is not as fast as expected, changing the
wireless channel on the access point may increase the communication speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless LAN
70
Note on the data encryption
The WLAN standard includes the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi
Protected Access 2 (WPA2), and Wi-Fi Protected Access (WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2
and WPA are specifications of standards based on interoperable security enhancements that increase the level of data
protection and access control for existing Wi-Fi networks. WPA is designed to be forward compatible with the IEEE 802.11i
specification. It utilizes the enhanced data encryption Temporal Key Integrity Protocol (TKIP) in addition to user authentication
using 802.1X and Extensible Authentication Protocol (EAP). Data encryption protects the vulnerable wireless link between
clients and access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as:
password protection, end-to-end encryption, virtual private networks, and authentication. WPA2, the second generation of
WPA, provides stronger data protection and network access control and is also designed to secure all versions of 802.11
devices, including 802.11b, 802.11a, 802.11g, and 802.11n standards, multi-band and multi-mode. In addition, based on the
ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of
Standards and Technology (NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2
is backward compatible with WPA.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless LAN
71
Starting Wireless LAN Communications
You first need to establish wireless LAN communications between your computer and an access point (not supplied). See
Windows Help and Support for more information. For help on setting up a wireless network, click Start, All Programs, and
VAIO Easy Connect, and then follow the on-screen instructions of the Easy Internet Connection Setup.
!
For details on how to select the channel that will be used by the access point, see the manual that came with your access point.
To start wireless LAN communications
1
Make sure an access point is set up.
See the manual that came with your access point for more information.
2
Turn on the WIRELESS switch.
3
4
Click Start, All Programs, and VAIO Smart Network or click the VAIO Smart Network icon
on the taskbar.
Click the switch next to Wireless LAN to toggle it to On in the VAIO Smart Network window.
Make sure the WIRELESS indicator light turns on.
!
5 GHz band wireless LAN communications, available on selected models only, are disabled by default. To enable 5 GHz band communication, you need
to select the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands from the drop-down list for Wireless LAN Settings in the VAIO Smart
Network settings window.
5
6
Click
or
on the taskbar.
Select the desired access point and click Connect.
✍
The Wi-Fi Direct function can be used if Wi-Fi Direct is displayed in the VAIO Smart Network window. For detailed information, see the help file included
with the VAIO Smart Network.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless LAN
72
Stopping Wireless LAN Communications
To stop wireless LAN communications
Click the switch next to Wireless LAN to toggle it to Off in the VAIO Smart Network window.
!
Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless WAN
73
Using the Wireless WAN
Using the wireless WAN allows your computer to connect to the Internet through the wireless network wherever there is the
mobile phone coverage.
The wireless WAN may not be available in some countries or regions.
Some features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
!
You cannot access wireless networks if you disable the wireless devices in the BIOS setup screen. To enable the devices, follow the steps in Disabling
Inserting a SIM Card
To use the wireless WAN function, you first need to insert a SIM card into the SIM card holder on your computer. Your SIM
card is contained within a base plate, about the size of a credit card.
✍
Depending on your country and model, you might receive an offer from the VAIO selected telecom operator. In that case the SIM card is either in the
operator SIM pack inside the carton box or already inserted in the SIM card holder. If the SIM card is not provided with your computer, you can purchase
one from your preferred telecom operator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless WAN
75
3
Remove the SIM card (1) by pushing it out from the base plate.
4
5
Slide the SIM card holder in the direction of the arrow (2) and then lift the holder.
Insert the SIM card into the SIM card holder with its printed circuit side up.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless WAN
76
6
Close the SIM card holder and then slide the holder in the direction of the arrow (3).
!
Do not touch the printed circuit on the SIM card. Be sure to hold your computer firmly before inserting or removing the card.
Do not damage the SIM card in any way, either by bending or exerting pressure on the card.
7
Close the SIM card cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the Wireless WAN
77
Starting the Wireless WAN Communications
To start the wireless WAN communications
!
Make sure that the SIM card cover is properly closed, otherwise the wireless WAN function may not work.
1
Turn on the WIRELESS switch.
2
3
4
Click Start, All Programs, and VAIO Smart Network or click the VAIO Smart Network icon
on the taskbar.
In the VAIO Smart Network window, make sure that the switch next to Wireless WAN is On.
Click the down arrow button next to the Wireless WAN switch and the Connect button to launch your connection manager
software or the preinstalled software from a telecom operator depending on your model or country.
5
6
7
Enter your PIN code when prompted.
Click Connect.
If requested, enter the APN information of your telecom operator.
✍
For more information on how to use the wireless WAN function, see the help file included with the VAIO Smart Network or your telecom operator's
documentation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the BLUETOOTH Function
78
Using the BLUETOOTH Function
You can establish wireless communications between your computer and other BLUETOOTH® devices such as another
computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in
an open area.
!
You cannot use the BLUETOOTH function if you disable the wireless devices in the BIOS setup screen. To enable the devices, follow the steps in
BLUETOOTH Security
The BLUETOOTH wireless technology has an authentication function, which allows you to determine with whom you choose
to communicate. With the authentication function, you can prevent any anonymous BLUETOOTH devices from accessing
your computer.
The first time two BLUETOOTH devices communicate, a common passkey (a password required for authentication) should
be determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.
✍
The passkey can be different each time, but must be the same at both ends.
For certain devices, such as a mouse, no passkey can be entered.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the BLUETOOTH Function
79
Communicating with Another BLUETOOTH Device
You can connect your computer to a BLUETOOTH device such as another computer, a mobile phone, a PDA, a headset, a
mouse, or a digital camera without the use of any cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the BLUETOOTH Function
80
To communicate with another BLUETOOTH device
To communicate with another BLUETOOTH device, you first need to set up the BLUETOOTH function. For information on
setting up and using the BLUETOOTH function, see Windows Help and Support.
1
Turn on the WIRELESS switch.
2
3
Click Start, All Programs, and VAIO Smart Network or click the VAIO Smart Network icon
on the taskbar.
Click the switch next to BLUETOOTH to toggle it to On in the VAIO Smart Network window.
Make sure the WIRELESS indicator light turns on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the BLUETOOTH Function
81
Stopping BLUETOOTH Communications
To stop BLUETOOTH communications
1
2
Turn off the BLUETOOTH device that is communicating with your computer.
Click the switch next to BLUETOOTH to toggle it to Off in the VAIO Smart Network window.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the BLUETOOTH Function
82
Notes on Using the BLUETOOTH Function
❑ The data transfer rate varies, depending on the following conditions:
❑ Obstacles, such as walls, located between devices
❑ Distance between devices
❑ Material used in walls
❑ Proximity to microwaves and cordless telephones
❑ Radio frequency interference and other environmental conditions
❑ Device configuration
❑ Type of software application
❑ Type of operating system
❑ Use of both wireless LAN and BLUETOOTH functions at the same time on your computer
❑ Size of file being exchanged
❑ Large files may occasionally be corrupted during continuous transfer due to limitations of the BLUETOOTH standard and
electromagnetic interference in the environment.
❑ All BLUETOOTH devices must be certified to make sure that the applicable standard requirements are maintained. Even
if standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange
may not be possible in all situations.
❑ Video and audio may not be synchronized if you play videos on your computer with audio output from a connected
BLUETOOTH device. This is a frequent occurrence with BLUETOOTH technology and does not indicate a malfunction.
❑ The 2.4 GHz band, with which BLUETOOTH devices or wireless LAN devices work, is used by various devices. Although
BLUETOOTH devices use the technology to minimize radio interference from other devices that use the same band, such
radio interference may cause slower communication speeds and shorter distances or communication failures.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the BLUETOOTH Function
83
❑ The BLUETOOTH function may not work with other devices, depending on the manufacturer or the software version
employed by the manufacturer.
❑ Connecting multiple BLUETOOTH devices to your computer may cause channel congestion, resulting in poor
performance of the devices. This is normal with BLUETOOTH technology and does not indicate a malfunction.
❑ High-speed communications between your computer and BLUETOOTH devices are available when they are compliant
with BLUETOOTH high speed technology. For the high-speed communications, enable both the wireless LAN and
BLUETOOTH functions on the computer.
See the specifications to find out about the configuration of your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Fingerprint Authentication
84
Using Fingerprint Authentication
Your computer may be equipped with a fingerprint sensor to provide you with additional convenience.
Some features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
Once you have registered your fingerprint(s), the fingerprint authentication function offers:
If you have registered your fingerprints for your user account, you can substitute fingerprint authentication for password
entry when logging onto Windows.
❑ Website Log On for quick web site access
Once you have registered your user information (user accounts, passwords, etc.) for web sites in the Website Log On,
you can substitute fingerprint authentication for entering information required to access the password-protected web sites.
For detailed information, see the help file included with the TrueSuite.
✍
To see the help file, click Start, All Programs, TrueSuite, and TrueSuite.
!
You may not be able to use the Website Log On feature depending on the web site you access.
❑ Quick Launch function for quick application access
The Quick Launch feature is available on your computer for launching your preferred application (executable file) that is
assigned to one of your fingers with a registered fingerprint. Once you have assigned an application to your finger, you
can launch the assigned application simply by swiping the finger across the fingerprint sensor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Fingerprint Authentication
85
Registering a Fingerprint
To use the fingerprint authentication function, you must register your fingerprint(s) in your computer.
To register a fingerprint
1
2
3
Click Start, All Programs, TrueSuite, and TrueSuite.
Click Get Started.
Follow the on-screen instructions.
If the Windows password setting window appears, set the Windows password.
✍
See the help file included with the TrueSuite for more detailed information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Fingerprint Authentication
86
If you have failed to register a fingerprint, follow these steps to try again.
1
Place the top joint of your finger flat in the center of the fingerprint sensor (1).
2
Swipe your finger perpendicularly across the fingerprint sensor and scan from the top joint of the finger to the fingertip.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Fingerprint Authentication
87
!
Keep your finger in contact with the fingerprint sensor while swiping.
Fingerprint registration may fail if you move your finger too quickly or too slowly. Let the fingerprint sensor take about one second to scan your
fingerprint.
You may not be able to register and/or have your fingerprint(s) recognized if your finger is too dry or wet, wrinkled, injured, dirty, etc.
Register more than one fingerprint in case that the fingerprint sensor fails to recognize the fingerprint.
Be sure to clean your fingertip(s) and the fingerprint sensor before swiping in order to keep good recognition performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using Fingerprint Authentication
88
Logging Onto Windows
To use the fingerprint authentication function in place of Windows password entry to log onto your system, you need to set
the Windows password and configure your computer for fingerprint authentication. For information on how to set the Windows
To log onto Windows
Swipe the registered finger across the fingerprint sensor when the Windows log-on screen appears. For detailed information,
see the help file included with the TrueSuite.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
89
Using the TPM
The Trusted Platform Module (TPM) may be embedded in your computer to provide basic security functions. In combination
with the TPM, you can encrypt and decrypt your data to strengthen computer security against inappropriate access.
Some features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
TPMs are defined by Trusted Computing Group (TCG) and also called security chips.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
90
Important Notice
Notes on encrypting the operating system or program files
Encrypting files used by your operating system or any software application, using the Encrypting File System (EFS) with the
TPM, will disable you to launch or operate such software.
To avoid such problems, observe the following before using the EFS:
❑ Be sure to save data you want to encrypt to the following destinations:
❑ The Encrypted Data folder created with the default settings in the user initialization process
❑ A new encrypted folder created in the My Documents folder or the Documents folder on your account
❑ The Personal Secure Drive
✍
The Personal Secure Drive is a virtual drive that is created by using the Personal Secure Drive feature and automatically encrypts data that is saved to it.
❑ Do not change the following settings on the View tab in the Folder Options window displayed by clicking Folder and
search options from Organize in the menu of Windows Explorer.
❑ Don't show hidden files, folders, or drives
❑ Hide protected operating system files (Recommended)
❑ Do not change the system attributes of the files, unless necessary.
❑ Do not encrypt the Windows folder, the Program Files folder, and all files in each folder.
❑ Do not encrypt the Users folder and all account folders in it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
91
Notes on encrypting key files or files on the Personal Secure Drive
Encrypting files created in the following folders when your user account is initialized and the EFS is enabled will disable you
to launch your TPM software and decrypt the encrypted data.
With the default settings, the files in the folders below cannot be encrypted because they have system attributes.
Do not change the system attributes of the files in the folders below.
!
The following folders are hidden by default.
❑ Folders containing key files
❑ C:\ProgramData\Infineon
❑ C:\Users\All Users\Infineon
(C:\Users\All Users is a shortcut to C:\ProgramData.)
❑
C:\Users\<account>\AppData\Roaming\Infineon
❑ Files on the Personal Secure Drive
C:\Security Platform\Personal Secure Drive\System Data\xxx.FSF
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
92
Notes on encrypting backup files or other files
Encrypting backup archive files or emergency recovery token files will disable you to recover your computer system for
emergency, and encrypting password reset token files or secret files will disable you to reset the password.
Do not encrypt the following files or folders:
✍
The default path for files below or displayed by clicking Browse is My Documents (or Documents)\Security Platform or Security Platform in removal
media.
❑ Automatic backup archive file
Default file name: SPSystemBackup.xml or SPSystemBackup_<your computer name>.xml
❑ Storage folder for automatic backup archive files
Folder name (Fixed):
❑ SPSystemBackup (The folder is created as the subfolder for the SPSystemBackup.xml file.)
❑ SPSystemBackup_<your computer name> (The folder is created as the subfolder for SPSystemBackup_<your
computer name>.xml file.)
❑ Emergency recovery token file
Default file name: SPEmRecToken.xml
❑ Password reset token file
Default file name: SPPwResetToken.xml
❑ Token file for emergency recovery/password reset
Default file name: SPToken_<your computer name>.xml
❑ Password reset secret file
Default file name: SPPwdResetSecret.xml or SPPwdResetSecret_<your computer name>_<user name>.<domain
name>.xml
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
93
❑ Key and certificate backup file
Default file name: SpBackupArchive.xml
❑ PSD backup file
Default file name: <Drive name>-Personal Secure Drive.fsb
❑ Owner password backup file
Default file name: SpOwner_<your computer name>.tpm
❑ Protocol file
Default file name: SpProtocol_<your computer name>_<user name>.<domain name>.txt
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
94
Configuring the TPM
To use the embedded TPM, you need to:
1
2
3
Enable the TPM in the BIOS setup screen.
Install the Infineon TPM Professional Package.
Initialize and configure the TPM.
To enable the TPM in the BIOS setup screen
1
Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
2
3
4
5
Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key.
Press the M or m key to select Enable and then the Enter key.
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
After your system restarts, select Execute in the confirmation window and then press the Enter key.
✍
You can also disable the TPM and clear the TPM configuration in the BIOS setup screen.
!
Before enabling the TPM, be sure to set the power-on password to protect against unauthorized modification of the TPM configuration.
If the TPM is enabled, it will take longer before the VAIO logo appears due to security checks at computer startup.
You will not be able to access any TPM-protected data if you clear the TPM ownership. Before clearing the TPM configuration, be sure to make backup
copies of the TPM-protected data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
95
To install the Infineon TPM Professional Package
Read the Readme.txt in the C:\Infineon\Readme folder. Then, double-click setup.exe in the C:\Infineon folder to install the
package.
To install this package, you must have administrative rights on the computer.
!
You need to set a few passwords while installing the Infineon TPM Professional Package. Without these passwords, you will not be able to restore
any TPM-protected data or backup files. Be sure to write down the passwords and keep them safe and private from other people.
To initialize and configure the TPM
See the on-screen documentation for detailed information. To open the documentation, click Start, All Programs, Infineon
Security Platform Solution, and Help.
!
The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability for any defects arising out
of your data maintenance and management.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
96
Using BitLocker Drive Encryption with the TPM
BitLocker Drive Encryption is a data encryption feature that is available on models with Windows 7 Ultimate or Windows 7
Enterprise. Enabling BitLocker Drive Encryption in conjunction with the TPM encrypts all data on the built-in storage device.
For detailed information on how to use and configure BitLocker Drive Encryption, see Windows Help and Support.
See the specifications to find out about the configuration of your computer.
Notes on using BitLocker Drive Encryption
❑ Be sure to initialize the TPM with the Infineon TPM Professional Package before enabling BitLocker Drive Encryption.
If you enable it without initializing the TPM, a TPM owner password is not generated, so you will not be able to configure
the Infineon TPM Professional Package.
❑ The Infineon TPM Professional Package does not make a backup copy of a file (recovery password) for BitLocker
Drive Encryption.
❑ An additional BitLocker system partition has been pre-configured. This system partition uses 100 MB of your total built-
in storage device volume.
❑ You must enable the TPM in the BIOS setup screen in order to turn on BitLocker Drive Encryption.
❑ Do not encrypt data on a storage device (such as a USB flash memory device) on which a recovery key is stored using
BitLocker Drive Encryption.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
97
To unlock the encrypted data with a recovery key stored on a USB flash memory device
To unlock the encrypted data with a recovery key stored on a USB flash memory device, your system needs to access the
USB flash memory device when you boot the computer. Follow these steps to configure the boot order in the BIOS setup
screen:
!
You cannot use USB devices if you disable the USB ports in the BIOS setup screen. To enable the ports, follow the steps in Disabling Built-in Devices
1
2
Connect a USB flash memory device.
Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
3
4
5
6
7
Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key.
Press the M or m key to select Enable and then the Enter key.
Press the < or , key to select Boot and then select Enabled for External Device Boot.
Press the M or m key to select Boot Priority and then the Enter key.
Press the F5 or F6 key to change the boot device order so that Internal Hard Disk is listed higher than External Device.
!
You need to move Internal Optical Drive to the top of the list to recover the computer system using your Recovery Media.
8
9
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
After your system restarts, select Execute in the confirmation window and then press the Enter key.
10 Follow the instructions in Windows Help and Support to enable BitLocker Drive Encryption.
11 Save the recovery password to the USB flash memory device in the window for saving the recovery password.
12 Follow the on-screen instructions.
The encryption process will start.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your VAIO Computer >
Using the TPM
98
!
Updating your BIOS with updating software, such as the VAIO Update, changes the BIOS settings back to the default. You need to repeat the steps
above again.
It takes several hours to complete the encryption process.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a Port Replicator
100
Connecting a Port Replicator
Attaching an optional port replicator enables you to connect additional peripherals to your computer, such as a printer and an
external display.
Locating Ports on the Port Replicator
A DC IN indicator
Illuminates while the port replicator is powered.
*1
*2
G Security slot
*1
Compliant with the USB 2.0 standard.
*2
The port replicator has a protective sticker
covering each LAN port.
Connect a 10BASE-T, 100BASE-TX, 1000BASE-T cable to the LAN port.
Using an incorrect cable, such as a phone cable, may result in an electric
current overload that can cause a malfunction, excessive heat, or fire in the
LAN port.
!
While the port replicator is attached to you computer, you cannot use the following ports.
- HDMI output port on your computer
- MONITOR port on your computer
- LAN port on your computer
Simultaneous use of the MONITOR port and the HDMI output port on the port replicator is not possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a Port Replicator
101
Attaching Your Computer to the Port Replicator
!
Be sure to install the battery pack(s) before attaching your computer to the port replicator.
To attach your computer to the port replicator
!
If the AC adapter is supplied with your port replicator, be sure to use it to connect the port replicator to a power source. If not, use the AC adapter
supplied with your computer.
To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator.
Do not move your computer when it is attached to the port replicator. This may detach the port replicator and cause damage to both units.
The monitor port, the HDMI output port, and the LAN port on your computer is not accessible when the computer is attached to the port replicator. Use
the MONITOR port, the HDMI output port, or the LAN port on the port replicator for connection.
1
2
3
Shut down the computer, close the LCD screen lid, and disconnect all peripheral devices and the AC adapter.
Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.
Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the port replicator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a Port Replicator
102
4
Remove the port replicator connector cover from the bottom of the computer.
!
You may find it difficult to remove the port replicator connector cover, as it is tight in place on your computer. Do not exert extra pressure when removing
the cover so as not to damage the computer or the port replicator connector cover.
Be sure to keep the removed port replicator connector cover for future use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a Port Replicator
103
5
Align the rear bottom corners of the computer with the guides on the port replicator.
✍
If an optional extended battery pack is attached to your computer, slide the tab (1) in the direction of the arrow to lift the connector (2) on the port
replicator to attach the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a Port Replicator
104
!
Be sure to slide the tab (1) to the end. If not, the connector (2) is not locked in the correct position, resulting in a contact failure between your computer
and the port replicator.
When the extended battery pack is not attached to your computer, slide the tab (1) in the opposite direction of the arrow to lower the connector (2).
Attaching the computer while the connector (2) is in the lifted position may damage the connectors.
6
Gently push down the computer until it clicks into place.
7
Lift open the LCD screen lid and turn on the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a Port Replicator
105
Disconnecting Your Computer from the Port Replicator
!
To prevent loss of unsaved data, be sure to turn off your computer before disconnecting it from the port replicator.
When the battery pack is running out of power, disconnecting your computer from the port replicator may result in loss of unsaved data.
To disconnect your computer from the port replicator
1
Lift the computer away from the port replicator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a Port Replicator
106
2
Replace the port replicator connector cover on the bottom of the computer.
✍
It is extremely important that you replace the port replicator connector cover after disconnecting your computer from the port replicator. If the connector
is left uncovered, dust may get inside and damage the computer.
To disconnect the port replicator completely from an AC power source, unplug the AC adapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting External Speakers or Headphones
107
Connecting External Speakers or Headphones
You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer.
To connect external speakers
✍
Make sure your speakers are designed for computer use.
!
Turn down the volume of the speakers before you turn them on.
Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting an External Display
108
Connecting an External Display
Some features and options in this section may not be available on your computer.
!
Blu-ray Disc playback on a connected external display may be interrupted, depending on the type or bit rate of the video. You may be able to solve this
problem by lowering the screen resolution of the display. Follow the steps in Why doesn't my screen display a video? (page 191) to change the screen
resolution.
✍
If disconnecting the external display from the optional port replicator does not automatically change the LCD resolution of your computer, change the
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting an External Display
109
Connecting a Computer Display or a Projector
You can connect an external display, such as a computer display or a projector, either directly to your computer or via the
optional port replicator.
To connect a computer display or a projector
!
The monitor port on your computer is not accessible when the computer is attached to the port replicator.
1
2
Plug the power cord (1) of your external display or the projector into an AC outlet.
Connect the external display or the projector to the monitor port (2) on the computer or the port replicator with a display
cable (3).
✍
If necessary, connect the headphones jack on the projector and the headphones jack (4) i on the computer with a speaker cable (5).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting an External Display
110
!
Your computer is compliant with the HDCP standard and capable of encrypting the transmission channel of digital video signals for the purpose of
copyright protection, which enables you to play and view a wide variety of copyright protected and high-quality content. To view the copyright protected
content, connect an HDCP-compliant monitor to the HDMI output port on your computer or the port replicator. If your computer has a non-compliant
monitor connected, you will not be able to play or view any copyright protected content.
✍
If the external computer display is equipped with an HDMI input port, plug one end of an HDMI cable into the HDMI output port on the computer or the
port replicator and the other end into the HDMI input port on the computer display.
To connect a TFT/DVI monitor, use an HDMI to DVI-D adapter to connect it to the HDMI output port on the computer or the port replicator.
DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI port that supports only digital video signals (no analog video signals). It has 24 pins.
A DVI-I (Digital Visual Interface - Integrated) port supports digital video and analog video signals. It has 29 pins.
The HDMI cable carries both video and audio signals.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting an External Display
111
Connecting a TV with an HDMI Input Port
You can connect a TV with an HDMI input port to your computer.
To connect a TV to your computer
!
To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For detailed instructions, see How
1
2
Plug the power cord of your TV (1) into an AC outlet.
Plug one end of an HDMI cable (2) to the HDMI output port (3) on the computer or the port replicator and the other end
to the TV.
3
4
Switch the input channel of the TV to external input.
Set up the TV configuration system.
!
If a device driver other than the one provided by Sony is used, the image will not be displayed and the audio will not be heard. Always use the device
driver provided by Sony for updates.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting an External Display
113
To play Blu-ray 3D Disc media
Some features and options may not be available on your computer.
See the specifications to find out about the configuration of your computer.
!
You cannot use optical discs if you disable the optical disc drive in the BIOS setup screen. To enable the drive, follow the steps in Disabling Built-in
On models with the Blu-ray Disc Drive, you can play Blu-ray 3D™ Disc media and view 3D images on a 3D-capable display,
such as a 3D TV, by connecting the display to the computer with an HDMI cable.
!
Be sure to follow the instructions in the manuals that came with your VAIO computer when viewing 3D images.
Be sure to use the 3D glasses specified by the TV manufacturer while viewing 3D images.
✍
See the manual that came with your 3D TV for detailed information on the 3D function.
1
2
Follow the steps in To connect a TV to your computer (page 111) for connecting your 3D TV to the computer with an
HDMI cable and set up the TV configuration system.
Select the STAMINA mode with the performance selector switch.
✍
3
4
Press the Fn+F7 keys to change the display output to only an external display.
Click Start, All Programs, CyberLink PowerDVD BD, and CyberLink PowerDVD BD.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting an External Display
114
5
6
Click
located at the lower right corner of the PowerDVD BD window, enable the 3D function, and click Auto Detect.
✍
You can change the screen resolution of your computer. Click
for changing the screen resolution.
located at the lower right corner of the PowerDVD BD window and the menu item
See the help file included with the PowerDVD BD for more information.
Insert Blu-ray 3D Disc media into the optical disc drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting an External Display
115
To connect a high-quality digital sound output device between your computer and a TV
You can connect a high-quality home theater receiver or other surround sound decoder devices between your computer and
TV using an HDMI connection.
!
Before connecting the device to the computer, make sure the HDMI connection has been set up between the TV and the home theater receiver or
surround sound decoder device first.
To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For detailed instructions, see How
1
2
3
Turn on the TV and set its input to the HDMI input.
Turn on the home theater receiver or surround sound decoder device and set its input to the HDMI input.
Plug one end of an HDMI cable to the HDMI input port on the home theater receiver or surround sound decoder device
and the other end to the HDMI output port on the computer or the port replicator.
✍
You can adjust the screen resolution of the connected TV with your computer. See Why doesn't my screen display a video? (page 191) for more
information.
With the HDMI connection, the volume can be adjusted by the connected audio device only. Your computer has no control over the output volume of
any connected devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Selecting Display Modes
116
Selecting Display Modes
When an external display is connected, you can select either your computer screen or the connected display to use as the
primary monitor.
!
The monitor port on your computer is not accessible when the computer is attached to the port replicator.
The screen resolution of your external display may change when you change the performance mode.
✍
You may not be able to display the same content on your computer screen and the external display or projector at the same time, depending on the
type of your external display or projector.
Turn on the external display before turning on your computer.
To select a display mode with the Fn+F7 keys
You can select a display mode with the Fn+F7 keys. See Combinations and Functions with the Fn Key (page 39) for more
information.
To select a display mode from the display settings
1
2
Right-click on the desktop and select Screen resolution.
Click the drop-down list next to Multiple Displays, select your desired setting, and then click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Using the Multiple Monitors Function
117
Using the Multiple Monitors Function
The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you
have an external display connected to your computer, your computer screen and the external display can function as a single
desktop.
You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window
or a toolbar, from one display to the other.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Using the Multiple Monitors Function
118
To use the Multiple Monitors function
!
The monitor port on your computer is not accessible when the computer is attached to the port replicator.
The screen resolution of your external display may change when you change the performance mode.
✍
Your external display may not support the Multiple Monitors function.
Certain software applications may not be compatible with Multiple Monitors settings.
Make sure that your computer does not enter Sleep or Hibernate mode while you are using the Multiple Monitors function, or the computer may not
return to Normal mode.
If you set different colors on each display, do not expand a single window across two displays, or your software may not work properly.
Right-click on the desktop and select Screen resolution.
1
2
Click the drop-down list next to Multiple Displays, select Extend these displays, and then click OK.
✍
You can set the display colors and resolution for each display and customize the Multiple Monitors function.
Set fewer colors or a lower resolution for each display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a USB Device
119
Connecting a USB Device
You can connect a Universal Serial Bus (USB) device, such as a mouse, a floppy disk drive, a speaker, or a printer, to your
computer.
!
You cannot use USB devices if you disable the USB ports in the BIOS setup screen. To enable the ports, follow the steps in Disabling Built-in Devices
To connect a USB device
1
2
Choose the USB port (1) you prefer to use.
Plug the USB device cable (2) into the USB port.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Peripheral Devices >
Connecting a USB Device
120
Notes on connecting a USB device
❑ You may need to install the driver software supplied with your USB device before use. See the manual that came with the
USB device for more information.
❑ Be sure to use a USB printer compatible with your version of Windows to print documents.
❑ For information on how to remove a USB device, see the manual that came with the device.
❑ To protect your computer and/or USB devices from damage, observe the following:
❑ When moving the computer with USB devices connected, avoid exposing the USB ports to shock or impact.
❑ Do not put the computer into a bag or carrying case when it has USB devices connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
121
Customizing Your VAIO Computer
This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn
how to use and customize the look of your Sony software and utilities.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Selecting Performance Modes
122
Selecting Performance Modes
Your computer is equipped with the performance selector switch for changing the performance mode without restarting the
computer. You can select either of the performance modes: STAMINA mode for lower power consumption or SPEED mode
for faster performance.
!
While any software application that prevents your computer from changing the performance mode is in use, selecting another mode with the
performance selector switch may not change the performance mode. In such a case, close the application. The selected mode will automatically be
activated. Changing the performance mode without closing the application may cause loss of unsaved data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Selecting Performance Modes
123
To select a performance mode
Slide the performance selector switch (1) to select a performance mode.
Type of Mode
Description
STAMINA mode
Uses the Intel Graphics Media Accelerator and disables some hardware devices on your computer to conserve
battery power.
SPEED mode
Uses the AMD Radeon Graphics to provide faster performance.
To check the current performance mode
❑ Find out which mode is selected with the performance selector switch.
❑ Find out which performance mode icon is displayed on the Windows desktop notification area.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Setting the Password
124
Setting the Password
Setting the password allows you to protect your computer from unauthorized access by making the user enter the password
when the computer is turned on or returns to Normal mode from Sleep mode or Hibernate mode.
!
Do not forget your password. Write down the password and keep it in a secure place.
Type of Password
Description
Power-on password
You can use BIOS functions to set two types of passwords:
- Machine password: Allows users with administrative rights to change all the setup options in the BIOS setup
screen, as well as to start the computer.
- User password: Allows the standard users to change some of the BIOS setup options, as well as to start the
computer. To set the user password, you must first set the machine password.
✍
Entry of the power-on password will be prompted after the VAIO logo appears to start your computer.
!
If you forget the machine password, the password needs to be reset and a fee will be charged. To reset the password,
contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO
You can reset the user password at the BIOS setup screen by entering the machine password.
Windows password
Allows users to log onto your computer and protect each user account with its own password.
✍
Entry of the Windows password will be prompted after you select your user account.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Setting the Password
125
Setting the Power-on Password
To add the power-on password (machine password)
1
2
3
Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters long (including spaces).
4
5
6
Select Password when Power On under Security and press the Enter key.
Change the setting from Disabled to Enabled.
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Setting the Password
126
To add the power-on password (user password)
!
Make sure you set the machine password before setting the user password.
1
Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
2
3
Enter the machine password and press the Enter key.
Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
4
5
On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters long (including spaces).
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
To change or remove the power-on password (machine password)
1
Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
2
3
Enter the machine password and press the Enter key.
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
4
5
On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Setting the Password
127
To change or remove the power-on password (user password)
1
Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
2
3
Enter the user password and press the Enter key.
Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
4
5
On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Setting the Password
128
Setting the Windows Password
To add the Windows password
1
2
3
4
5
6
Click Start and Control Panel.
Click User Accounts and Family Safety or User Accounts.
Click User Accounts.
Click Create a password for your account under Make changes to your user account.
In the New password and Confirm new password fields, enter the password for your account.
Click Create password.
✍
See Windows Help and Support for more information on the Windows password.
To change the Windows password
1
2
3
4
5
6
7
Click Start and Control Panel.
Click User Accounts and Family Safety or User Accounts.
Click User Accounts.
Click Change your password.
In the Current password field, enter your current password.
In the New password and Confirm new password fields, enter a new password.
Click Change password.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Setting the Password
129
To remove the Windows password
1
2
3
4
5
6
Click Start and Control Panel.
Click User Accounts and Family Safety or User Accounts.
Click User Accounts.
Click Remove your password.
In the Current password field, enter the current password that you want to remove.
Click Remove password.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Using the VAIO Control Center
130
Using the VAIO Control Center
The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior.
To use the VAIO Control Center
1
2
3
Click Start, All Programs, and VAIO Control Center.
Select your desired control item and change the settings.
Once finished, click OK.
The setting of the desired item is changed.
✍
For more information about each option, see the help file included with the VAIO Control Center.
Some of the control items will not be visible if you open the VAIO Control Center as a standard user.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Using the VAIO Power Management
131
Using the VAIO Power Management
Power management helps you set up power plans for running on AC or battery power to suit your requirements for power
consumption.
The VAIO Power Management function is added to the Windows Power Options. With this software application, you can
enhance the Windows power management functions to ensure better operation of your computer and longer battery life.
Selecting a Power Plan
When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you
are currently using. Click this icon to display the window that shows your power status.
To select a power plan
1
2
Right-click the power status icon on the taskbar and select Power Options.
Select your desired power plan.
To change the power plan settings
1
2
3
4
Click Change plan settings on the right of your desired power plan in the Power Options window.
Change the Sleep mode and display settings as needed.
If you need to change the advanced settings, click Change advanced power settings and go to step 3.
Otherwise, click Save changes.
Click the VAIO Power Management tab.
Change the settings for each item.
Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Changing the Display Language
132
Changing the Display Language
On models with Windows 7 Ultimate or Windows 7 Enterprise, you can download and install your desired language pack.
See the specifications to find out about configuration of your computer.
!
To download a language pack, your computer must be connected to the Internet. For information on how to connect the computer to the Internet, see
To install a language pack
1
2
3
4
Click Start, All Programs, and Windows Update.
Click xx (number) optional updates are available.
Select the desired language pack from the list.
Click OK to start the download and installation of the selected language pack.
To change the display language
1
2
3
4
5
Click Start, Control Panel, and Clock, Language, and Region.
Click Region and Language.
Select the Keyboards and Languages tab.
Choose a display language from the drop-down list.
Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Protecting Data from Unauthorized Use
133
Protecting Data from Unauthorized Use
Disabling Built-in Devices
You can use one of the BIOS functions to disable the following built-in devices and prohibit external connections and
communications.
❑ USB Ports
❑ Memory Card Slot ("Memory Stick Duo" slot and SD memory card slot)
❑ Optical Disc Drive (built-in optical disc drive)
❑ Wireless Devices (wireless LAN, WiMAX, wireless WAN, BLUETOOTH, and GPS functions)
❑ LAN Device (LAN port)
✍
The built-in devices you can disable depend on the model you purchased.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Protecting Data from Unauthorized Use
134
To disable built-in devices
1
Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
2
3
4
Press the < or , key to select Advanced.
Press the M or m key to select your desired built-in device, and press the Enter key.
Press the M or m key to select Disabled and press the Enter key.
✍
To enable the device, select Enabled instead of Disabled.
5
6
If you want to disable more built-in devices, repeat steps 3 and 4 for each device.
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your VAIO Computer >
Protecting the Hard Disk
135
Protecting the Hard Disk
If your computer is equipped with a built-in hard disk drive, then the hard disk drive protection function is available. This
function protects your hard disk drive against shock hazards.
See the specifications to find out about the configuration of your computer.
!
Be aware that the hard disk drive protection function does not work for the solid state drive.
The hard disk drive protection function is designed to minimize possibilities of damage to hard disk drives and user data. It does not ensure 100% data
protection under any circumstances.
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your VAIO Computer >
136
Upgrading Your VAIO Computer
Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid
invalidation of the warranty during your product warranty period, we recommend that:
❑ You should contact your dealer to install a new memory module.
❑ You should not install it yourself, if you are not familiar with upgrading memory on a computer.
❑ You should not touch the connectors or open the memory module compartment cover.
For assistance, contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More
The type of module and the amount of memory installed on your computer may differ depending on the model you purchased.
See the specifications to find out about the configuration of your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your VAIO Computer >
Adding and Removing Memory
137
Adding and Removing Memory
If you want to expand the functionality of your computer, you can increase the amount of memory by replacing the installed
memory module. Before you upgrade your computer's memory, read the notes and procedures in the following pages.
Notes on adding memory modules
❑ Be sure to place your computer on a flat surface before adding or removing memory modules.
❑ Be careful when changing memory. Improper installation of memory modules may cause damage to your system. This
damage may void your manufacturer's warranty.
❑ Only use memory modules that are compatible with your computer. If a memory module is not detected by the computer
or the Windows operating system becomes unstable, contact the sales dealer or the manufacturer of your memory
module.
❑ Electrostatic discharge (ESD) can damage electronic components. Before touching a memory module, ensure the
following:
❑ The procedures described in this document assume user familiarity with the general terminology associated with
personal computers and with the safety practice and regulatory compliance requirements for using and modifying
electronic equipment.
❑ Turn off your computer and disconnect it from its power sources (battery pack and AC adapter) and from any
telecommunication links or networks before you remove any cover or panel from the computer. Failure to do so may
result in personal injury or equipment damage.
❑ ESD can damage memory modules and other components. Install the memory module only at an ESD workstation.
If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold
static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal
portion of the chassis while performing the procedure.
❑ Do not open the memory module package before you are ready to change the module. The package protects the
module from ESD.
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your VAIO Computer >
Adding and Removing Memory
138
❑ Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD.
❑ Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your
computer will result in damage to the computer and any repair costs will not be covered by the warranty.
❑ Do not place the memory module in a location subject to:
❑ Heat sources such as radiators or air ducts
❑ Direct sunlight
❑ Excessive dust
❑ Mechanical vibration or shock
❑ Strong magnets or speakers that are not magnetically shielded
❑ Ambient temperature of more than 35°C or less than 5°C
❑ High humidity
❑ Handle the memory module with care. To avoid injuries to your hands and fingers, do not touch the edges of the
components and circuit boards inside your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your VAIO Computer >
Adding and Removing Memory
139
Removing and Installing a Memory Module
To change or add a memory module
1
2
3
Shut down the computer and disconnect all peripheral devices.
Wait about an hour until the computer cools down.
Unscrew the two screws (1), slide the bottom cover in the direction of the arrow (2), and remove the cover.
!
Be careful not to lose the removed screws.
4
5
Touch a metal object to discharge static electricity.
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your VAIO Computer >
Adding and Removing Memory
140
6
Remove the currently installed memory module as follows:
❑ Pull the latches in the direction of the arrows (1).
The memory module is released.
❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).
7
Remove the new memory module from its packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your VAIO Computer >
Adding and Removing Memory
141
8
Slide the memory module into the memory module slot and push it in until it clicks into place.
!
Do not touch any components on the motherboard other than the memory module.
Be careful not to touch the wires and the projections inside the bottom cover.
Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open
slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module.
9
Replace the cover and the removed screws and then tighten the screws.
10 Turn on the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your VAIO Computer >
Adding and Removing Memory
142
Viewing the Amount of Memory
To view the amount of memory
1
2
3
Turn on the computer.
Click Start, All Programs, and VAIO Control Center.
Click System Information and System Information.
You can view the amount of system memory in the right pane. If the additional memory does not appear, repeat the
installation procedure and restart the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Safety Information
144
Safety Information
Computer
❑ Use your computer on a solid, stable surface.
❑ It is recommended that you do not use your computer directly on your lap. The temperature of the base of the unit may
rise during normal operation and over time could result in discomfort or burns.
❑ Use only specified peripheral equipment and interface cables.
❑ Keep small parts such as "Memory Stick" and "Memory Stick" adaptors out of reach of children. There is a risk of
swallowing them.
Power Source
❑ Do not place the AC adapter in contact with your skin. Remove the AC adapter away from your body if it becomes warm
and causes discomfort.
❑ Do not place heavy objects on the power cord, or this could cause a fire.
❑ To disconnect the power cord, pull it out by holding the plug. Never pull the cord itself.
❑ Unplug your computer from the AC outlet if you are not planning to use the computer for an extended period of time.
❑ When the AC adapter is not used, unplug it from the AC outlet.
❑ Make sure that an AC outlet is easily accessible.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Safety Information
145
Battery Pack
❑ Do not leave battery packs in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight.
❑ For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that
meet the quality assurance standard, supplied by Sony for your VAIO computer. Some VAIO computers may only function
with a genuine Sony battery pack.
❑ Keep the battery pack away from all sources of heat.
❑ Keep the battery pack dry.
❑ Do not open or try to disassemble the battery pack.
❑ Do not expose the battery pack to any mechanical shock, such as caused by dropping it on a hard surface.
❑ If you are not using your computer for an extended period of time, remove the battery pack from the computer to prevent
damage to the battery pack.
❑ If you have not used the battery pack for a considerable amount of time, the remaining battery life may become short.
This is normal and does not indicate a malfunction. The battery pack will gradually discharge over time even while not in
use. Connect the AC adapter to your computer and recharge the battery pack before using the computer again.
Headphones
❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic
hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at
pedestrian crossings.
❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud
and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Care and Maintenance Information
146
Care and Maintenance Information
Computer
❑ Clean the cabinet with a soft, dry or lightly moistened cloth with a mild detergent solution. Do not use an abrasive pad,
scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.
❑ Make sure you unplug the AC adapter and remove the battery pack before cleaning your computer.
LCD Screen
Use a soft, dry cloth to wipe the surface of the LCD screen. Rubbing the surface could damage the screen.
Built-in Camera
Clean the area on and around the built-in camera with a soft, dry cloth. Do not rub the area too hard, as it can be easily
scratched.
Discs
❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol,
commercially available cleaners, or anti-static spray) which may cause damage to the disc.
❑ For normal cleaning, hold the disc by its edges and use a soft cloth to wipe the surface from the center out.
❑ If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from
the center out. Wipe off any remaining moisture with a dry soft cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Handling Your Computer
147
Handling Your Computer
❑ If you drop a solid object or any liquid onto your computer, shut down the computer, unplug it, and remove the battery
pack. You may want to have the computer checked by qualified personnel before operating it again.
❑ Do not drop your computer or place any objects on top of the computer.
❑ Do not place your computer in a location subject to:
❑ Heat sources, such as radiators or air ducts
❑ Direct sunlight
❑ Excessive dust
❑ Moisture or rain
❑ Mechanical vibration or shock
❑ Strong magnets or speakers that are not magnetically shielded
❑ Ambient temperature of more than 35°C or less than 5°C
❑ High humidity
❑ Do not place electronic equipment near your computer. The electromagnetic field of the equipment may cause the
computer to malfunction.
❑ Do not use your computer without installing the battery pack as it may cause the computer to malfunction.
❑ Your computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs, move
the computer a suitable distance away from the radio or TV.
❑ Do not use cut or damaged connection cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Handling Your Computer
148
❑ If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In
such a case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and
contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your
❑ To avoid losing data when your computer is damaged, back up your data regularly.
❑ Do not exert pressure on the LCD screen or its edges when opening the LCD screen lid or lifting your computer. The LCD
screen may be sensitive to pressure or added stress, and exerting pressure may damage the screen or cause it to
malfunction. To open the computer, hold the base with one hand and gently lift the LCD screen lid with the other. To carry
the computer with the lid open, be sure to hold the computer with both hands.
❑ Use a carrying case specially designed to carry your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Handling the LCD Screen
149
Handling the LCD Screen
❑ Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be sure to block direct sunlight when
using your computer near a window.
❑ Do not scratch the surface of the LCD screen or exert pressure on it. This could cause a damage.
❑ Using your computer in low temperature conditions may produce a residual image on the LCD screen. This does not
indicate a malfunction. When the computer returns to normal temperature, the screen returns to normal.
❑ A residual image may appear on the LCD screen if the same image is displayed for an extended period of time. The
residual image disappears after a while. You can use a screen saver to prevent residual images.
❑ The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction.
❑ The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright
points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result of the manufacturing
process and does not indicate a malfunction.
❑ Do not change the LCD screen orientation setting in the Tablet PC Settings window even when there are change options
available for selection, as this may make your computer unstable. Sony assumes no liability for any malfunctions arising
from changes to the settings.
❑ Do not exert pressure on the LCD screen lid with the lid closed as it may scratch the LCD screen or soil it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Using the Power Source
150
Using the Power Source
❑ Do not share an AC outlet with other power-consuming equipment, such as a photocopier or a shredder.
❑ You can purchase a power strip with a surge protector. This device helps prevent damage to your computer caused by
sudden power surges, in an electrical storm, for example.
❑ Use the AC adapter supplied with your computer or genuine Sony products. Do not use any other AC adapter as it may
cause a malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Handling the Built-in Camera
151
Handling the Built-in Camera
❑ Do not scratch or soil the area on and around the built-in camera, as it may cause poor quality images.
❑ Do not let the direct sunlight get into the lens of the built-in camera regardless of your computer's power state, as it may
cause the camera to malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Handling Discs
152
Handling Discs
❑ Fingerprints and dust on the surface of a disc may cause read errors. Be sure to hold the disc by its edges and central
hole, as shown below:
❑ Never affix an adhesive label to a disc. This will affect the use of the disc and may result in irreparable damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Using the Battery Pack
153
Using the Battery Pack
❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.
❑ Charge battery packs at temperatures between 10°C to 30°C. Lower temperatures require longer charging time.
❑ Do not charge the battery pack in any way other than as described in this user guide or as designated by Sony in writing.
❑ While the battery pack is in use or being charged, heat builds up in the battery pack. This is normal and is not cause for
concern.
❑ You do not need to discharge the battery pack before recharging.
❑ If the battery pack quickly runs out of power after being fully charged, it may be reaching the end of its life and should be
replaced.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Handling "Memory Stick"
154
Handling "Memory Stick"
❑ Do not touch the "Memory Stick" connector with your finger or metallic objects.
❑ Use only the adhesive label supplied with "Memory Stick".
❑ Do not bend, drop, or expose "Memory Stick".
❑ Do not disassemble or modify "Memory Stick".
❑ Keep "Memory Stick" dry.
❑ Do not use or store "Memory Stick" in a location subject to:
❑ Static electricity
❑ Electrical noise
❑ Extremely high temperatures, such as in a car parked in the sun
❑ Direct sunlight
❑ High humidity
❑ Corrosive substances
❑ Use the storage case supplied with "Memory Stick".
❑ Be sure to make a backup copy of your valuable data.
❑ When using "Memory Stick Duo", do not use a fine-tipped pen to write on the label adhered to "Memory Stick Duo".
Exerting pressure on the media may damage internal components.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Handling the Built-in Storage Device
155
Handling the Built-in Storage Device
The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short
time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be
restored. To prevent losing data, you should be careful when handling your computer.
To avoid damaging your built-in storage device
❑ Do not subject your computer to sudden movements.
❑ Keep your computer away from magnets.
❑ Do not place your computer in a location subject to mechanical vibration or in an unstable position.
❑ Do not turn off the power or restart your computer while reading or writing data to the storage device.
❑ Do not use your computer in a place subject to extreme changes in temperature.
❑ Do not remove the storage device from your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Using Fingerprint Authentication
156
Using Fingerprint Authentication
❑ The fingerprint authentication technology does not ensure complete user authentication or complete protection of your
data and hardware.
Sony assumes no liability for any problems and damages arising out of your use of or inability to use the fingerprint sensor.
❑ The fingerprint recognition rate depends on your operating conditions and varies among individuals as well.
❑ In case the built-in storage device has to be initialized, for example after the repair work, the fingerprint templates will be
lost. You will have to register them all over again.
❑ The maintenance and management of data concerning fingerprint authentication must be carried out at your own risk.
Sony assumes no liability for any defects arising out of your data maintenance and management.
❑ A fingerprint sensor may malfunction or be damaged if you scratch its surface with:
❑ a solid or sharp-pointed object
❑ fine objects, for example swiping a finger covered with dirt across the fingerprint sensor
❑ Discharge static electricity from your finger by touching a metallic object especially during dry seasons (e.g. winter) before
scanning your fingerprint. Static electricity may cause the fingerprint sensor to malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions >
Using the TPM
157
Using the TPM
❑ Although your computer is provided with the TPM security functions, these functions do not ensure complete protection
of your data and hardware. Sony assumes no liability for any problems and damages arising out of your use of the
functions.
❑ After you have installed the Infineon TPM Professional Package, you need to set a few TPM passwords on your
computer. Without these passwords, you will not be able to restore any TPM-protected data. Be sure to write down the
passwords and keep them safe and private from other people.
❑ Be sure to make backup copies of the latest emergency recovery archive file, emergency recovery token file, password
reset token file, and personal secret file and keep them safe and private from other people before sending your computer
for repair. The data stored in the TPM that is embedded on the motherboard may be lost or corrupted during the course
of repair.
❑ During the course of repair, the TPM will also be replaced if the motherboard needs replacement. In such a case, use the
backup copies of the emergency recovery archive file, emergency recovery token file, password reset token file, and
personal secret file to restore the TPM configuration.
❑ Be sure to make a backup copy of the data stored on the built-in storage device before sending your computer for repair.
The built-in storage device may be initialized and returned after the repair work and, in such a case, you will not be able
to restore the data on the device using the backup copies of the emergency recovery archive file, emergency recovery
token file, password reset token file, and personal secret file.
❑ Make sure you set up the automatic backup operations after completing the TPM initialization wizard. If the window
containing the Run automatic backup now check box is displayed after the setup, select the check box and update the
backup files. The restore process using the backup files may fail if you do not set up the automatic backup operations.
❑ The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability
for any defects arising out of your data maintenance and management.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
158
Troubleshooting
This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems
have simple solutions. If these suggestions fail to solve your problems, use the VAIO Care. To launch the software, see
If the problems still cannot be solved and you need assistance, visit the support web sites listed in Finding More about Your
VAIO Computer (page 5)
.
Some features and options in this section may not be available on your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Computer Operations
160
Computer Operations
What should I do if my computer does not start?
❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.
❑ Make sure the battery pack is installed properly and charged. If an extended battery pack is attached to the computer,
make sure both the primary battery pack and the extended battery pack are installed properly and charged.
❑ Disconnect all connected USB devices (if any), and then restart your computer.
❑ Remove any extra memory modules you may have installed since purchase, and then restart your computer.
❑ If your computer is plugged into a power strip or an uninterruptible power supply (UPS), make sure the power strip or UPS
is plugged into a power source and turned on.
❑ If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness
and contrast controls are adjusted correctly. See the manual that came with your display for more information.
❑ Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC
adapter, and then press the power button to turn on your computer.
❑ Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour.
❑ Check that you are using the supplied Sony AC adapter. For your safety, use only the genuine Sony rechargeable battery
pack and AC adapter, which are supplied by Sony for your VAIO computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Computer Operations
161
What should I do if the green power indicator light turns on but my screen remains blank?
❑ Press the Alt+F4 keys several times to close the application window. An application error may have occurred.
❑ If the Alt+F4 keys do not work, click Start, the arrow next to the Shut down button, and Restart to restart your computer.
❑ If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow
button and Restart.
next to the Shut down
If the Windows Security window appears, click Restart.
❑ If this procedure does not work, press and hold the power button for more than four seconds to shut down your computer.
Unplug the AC adapter and leave the computer for about five minutes. Then plug the AC adapter and turn on the computer
again.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Computer Operations
162
What should I do if my computer or software stops responding?
❑ If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application
window.
❑ If the Alt+F4 keys do not work, click Start and the Shut down button to turn off your computer.
❑ If your computer does not turn off, press the Ctrl+Alt+Delete keys and click the Shut down button.
If the Windows Security window appears, click Shut Down.
❑ If this procedure does not work, press and hold the power button until the computer turns off.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
❑ Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC
adapter, and then press the power button to turn on your computer.
❑ Try reinstalling the software.
❑ Contact the software publisher or designated provider for technical support.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Computer Operations
163
Why doesn't my computer enter Sleep or Hibernate mode?
Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or
Hibernate mode.
To restore your computer to Normal mode
1
2
3
Close all open programs.
Click Start, the arrow next to the Shut down button, and Restart.
If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and
Restart.
If the Windows Security window appears, click Restart.
4
If this procedure does not work, press and hold the power button until the computer turns off.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
What should I do if the charge indicator light is blinking fast and my computer does not
start?
❑ This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer
and push and hold the battery off button for about three seconds with a thin, straight object (such as a paper clip). If this
does not solve the problem, remove the battery pack and install it once again. For details, see Installing/Removing the
❑ If the problem persists, it means the installed battery pack is not compatible. Remove the battery pack and contact an
authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Computer Operations
164
Why does the System Properties window display a slower CPU speed than the
maximum?
This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation
purposes, System Properties may display the current CPU speed instead of the maximum speed.
What should I do if my computer does not accept my password and returns a message,
Enter Onetime Password?
If you enter a wrong power-on password three times consecutively, the Enter Onetime Password message appears and
Windows will not start. Press and hold the power button for more than four seconds to check that the power indicator light
turns off. Wait for 10 to 15 seconds, then restart your computer and enter the correct password. The password is case
sensitive, so be sure to check letters for the current case before you enter the password.
What should I do if my game software does not work or it keeps crashing?
❑ Check the web site of the game if there are any patches or updates to download.
❑ Make sure you have installed the latest video driver software.
❑ On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in such a case
is not guaranteed.
Why doesn't my screen turn off after the automatic turn-off time has passed?
Some software applications or screen savers are designed to temporarily disable the feature of your operating system that
turns off the computer screen or places the computer into Sleep mode after a certain period of inactivity. To solve this
problem, exit the running software application(s) or change the current screen saver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Computer Operations
165
How can I change the boot device order?
You can use one of the BIOS functions to change the boot device order. Follow these steps:
1
Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
2
3
4
5
Press the < or , key to select Boot.
Press the M or m key to select the drive whose boot device order you want to change.
Press the F5 or F6 key to change the boot device order.
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
What should I do if I cannot boot my computer from the USB floppy disk drive connected
to the computer?
❑ To boot your computer from the USB floppy disk drive, you need to change the boot device.
Turn on your computer and press the F11 key repeatedly until the VAIO logo disappears.
❑ If you have disabled the USB ports in the BIOS setup screen, you cannot use the USB floppy disk drive connected to one
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
System Update / Security
166
System Update / Security
How can I find important updates for my computer?
You can find and install the latest updates on your computer with the software applications: the Windows Update and the
How do I schedule the installation of Windows updates to my computer?
The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against
security threats, such as viruses, is to download and install the latest Windows updates regularly.
You can get important Windows updates by doing the following:
!
Your computer must be connected to the Internet to download the updates.
1
2
3
4
Click Start and Control Panel.
Click System and Security.
Click Action Center.
Follow the on-screen instructions to set up automatic or scheduled updates.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Recovery / Recovery Media
167
Recovery / Recovery Media
How can I create Recovery Media?
You can create Recovery Media using the VAIO Care (page 37). The media are used to restore your computer system to its
factory default settings.
!
If your computer is not equipped with a built-in optical disc drive, you need to connect an external optical disc drive (not supplied).
See the Recovery, Backup and Troubleshooting Guide for more information.
How can I restore my computer system to its factory default settings?
There are two ways to recover your computer system: from Recovery Media and from the recovery area. See the Recovery,
Backup and Troubleshooting Guide for more information.
How can I reinstall the original software and drivers?
See the help file included with the VAIO Care for more information.
How do I check the volume of the recovery area?
Your built-in storage device contains the recovery area where the data for the system recovery is stored. To check the volume
of the recovery area, follow these steps:
1
2
Click Start, right-click Computer, and select Manage.
Click Disk Management under Storage in the left pane.
The volume of the recovery area and the total volume of the C drive are displayed in the Disk 0 row in the center pane.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Recovery / Recovery Media
168
How do I reduce the volume of the recovery area?
Your built-in storage device contains the recovery area where the data for system recovery is stored. If your computer
includes a solid state drive, you might want to minimize the recovery area by removing such data.
1
If you recover your computer from Recovery Media (optical discs) on the model without a built-in optical disc drive, connect
an external optical disc drive (not supplied) to the computer and to an AC power source.
2
Insert the disc into the optical disc drive or connect the USB flash drive (not supplied) to the USB port while the computer
is in Normal mode.
!
Use Recovery Media you created upon delivery of your computer.
You cannot use USB devices if you disable the USB ports in the BIOS setup screen. To enable the ports, follow the steps in Disabling Built-in Devices
3
Turn off the computer and turn it on once again.
✍
If you are using the external optical disc drive or USB flash drive, press the F11 key repeatedly until the VAIO logo disappears.
4
5
Press the M or m key to select VAIO Care Rescue and press the Enter key.
Click Tools and Start advanced recovery wizard.
✍
When the Do you need to rescue data? message appears, make a backup copy of your data, if needed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Recovery / Recovery Media
169
6
Follow the on-screen instructions until the Select recovery type window appears.
Select Custom recovery - Remove recovery contents.
Follow the on-screen instructions.
7
8
!
The above procedure involves system recovery. The applications and data you added on the storage device before removing the data for system
recovery will all be lost.
Once you have removed the data for system recovery, you need the Recovery Media for later system recovery.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Partition
170
Partition
How can I create a hard disk partition?
The Windows feature allows you to create a partition without recovering your computer system.
1
2
Click Start, Control Panel, System and Security, and Create and format hard disk partitions under Administrative
Tools.
If the User Account Control window appears, click Yes.
If you are currently logged onto your computer as a standard user, you may be prompted to enter an administrator name
and password.
3
4
5
6
Right-click the C drive and select Shrink Volume.
Enter the size of the partition to be created in Enter the amount of space to shrink in MB and click Shrink.
Right-click Unallocated and select New Simple Volume.
Follow the on-screen instructions.
✍
If you use the VAIO Care Rescue, you can create a partition in the recovery process. See Using the VAIO Care (page 37) for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Battery Pack
171
Battery Pack
How do I find the battery charging status?
You can check the charge indicator for the battery charging status. See Charging the Battery Pack (page 27) for more
information.
When is my computer using AC power?
When your computer is connected to an AC outlet with the AC adapter, it uses AC power, even if the battery pack is installed.
When should I recharge the battery pack?
Recharge the battery pack when:
❑ The battery pack is running out of power and both the charge and power indicator lights blink.
❑ You have not used the battery pack for an extended period of time.
When should I replace the battery pack?
A message prompting you to replace the battery pack appears when the battery pack reaches the end of its life. You can
check the battery charge capacity with the Battery function on the VAIO Control Center.
Should I be concerned that the installed battery pack is warm?
No, it is normal for the battery pack to be warm while it is powering your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Battery Pack
172
Can my computer enter Hibernate mode while running on battery power?
Your computer can enter Hibernate mode while running on battery power, but some software programs and peripheral
devices prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering
Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 34) for information on
how you can manually activate Hibernate mode.
Why can't I fully charge my battery pack?
The battery care function is enabled to extend the life of your battery pack on the VAIO Control Center. Check the settings
on the VAIO Control Center.
What should I do if a message appears notifying of either incompatibility or the improper
installation of the battery pack and my computer then enters Hibernate mode?
❑ This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer
and push and hold the battery off button for about three seconds with a thin, straight object (such as a paper clip). If this
does not solve the problem, remove the battery pack and install it once again.
If an extended battery pack is attached to the computer, turn off the computer and remove the extended battery pack. If
this does not solve the problem, push and hold the battery off button for about three seconds. If the problem persists,
remove both battery packs and install them once again. For information on how to install and remove the battery pack,
❑ If the problem persists, it means the installed battery pack is not compatible. Remove the battery pack and contact an
authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Built-in Camera
173
Built-in Camera
Why does the viewfinder show no images or poor-quality images?
❑ The built-in camera cannot be shared by more than one software application. Exit the current application before launching
another. On models with Media Gallery, you cannot use another camera application that uses the built-in camera while
using the gesture function of Media Gallery.
❑ The viewfinder may show some noise, for example horizontal streaks, when you are viewing a rapid-moving object. This
is normal and does not indicate a malfunction.
❑ If the problem persists, restart your computer.
Why is the video input from the built-in camera suspended for a few seconds?
The video input may be suspended for a few seconds if:
❑ a shortcut key with the Fn key is used.
❑ the CPU load increases.
This is normal and does not indicate a malfunction.
Why are captured images poor in quality?
❑ The images captured under the fluorescent light may show reflections of light.
❑ A dark portion in captured images may appear as a noise.
❑ The area on and around the built-in camera is dirty. Clean the area. See Care and Maintenance Information (page 146).
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Built-in Camera
174
What should I do if captured images contain dropped frames and audio interruptions?
❑ The effect settings on your software application may cause dropped frames. See the help file included with your software
application for more information.
❑ There may be more software applications running than your computer can handle. Exit the applications that you are not
currently using.
❑ This problem may occur while your computer is running on the power saving plan, which reduces the CPU performance.
What should I do if movie playback shows dropped frames while my computer is running
on battery power?
The battery pack is running out of power. Connect your computer to an AC outlet.
What should I do if captured images flicker?
This problem occurs when you use the camera under fluorescent lights due to a mismatch between the lighting output
frequency and the shutter speed.
To reduce flicker noise, change the direction of the camera or the brightness of camera images. In some software
applications, you can set an appropriate value to one of the camera properties (e.g. light source, flicker, etc.) to eliminate
flicker noise.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Networking (LAN/Wireless LAN)
175
Networking (LAN/Wireless LAN)
What should I do if the VAIO Smart Network icon is not displayed on the taskbar?
❑ Click
on the taskbar and check if the VAIO Smart Network icon
is displayed.
❑ If the VAIO Smart Network icon
is not on the taskbar, click Start, All Programs, and VAIO Smart Network, and then
change the setting to display the icon on the taskbar.
What should I do if my computer cannot connect to a wireless LAN access point?
❑ Connection capability is affected by distance and obstructions. You may need to move your computer away from
obstructions or closer to any access point you may be using.
❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.
❑ Make sure power to the access point is on.
❑ If you want to connect your computer to a wireless LAN access point using the 5 GHz band, make sure the option to use
the 5 GHz band or both the 2.4 GHz and 5 GHz bands is selected for Wireless LAN Settings in the VAIO Smart Network
settings window. Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected
models only, is disabled by default.
❑ Follow these steps to check the settings:
1
2
3
Click Start and Control Panel.
Click View network status and tasks under Network and Internet.
Click Connect to a network to confirm that your access point is selected.
❑ Make sure the encryption key is correct.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Networking (LAN/Wireless LAN)
176
❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. To change the settings, follow these steps:
1
2
3
4
5
6
Click Start and Control Panel.
Click System and Security and Power Options.
Click Change plan settings for the current power plan.
Click Change advanced power settings.
Double-click Wireless Adapter Settings and Power Saving Mode.
Select Maximum Performance from the drop-down list.
❑ If you have disabled the wireless devices in the BIOS setup screen, you cannot connect to wireless access points. To
What should I do if I cannot access the Internet?
❑ Check the access point settings. See the manual that came with your access point for more information.
❑ Make sure your computer and the access point are connected to one another.
❑ Move your computer away from obstacles or closer to any access point you may be using.
❑ Make sure your computer is properly configured for Internet access.
❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot
❑ If you have disabled the wireless devices or the LAN port in the BIOS setup screen, you cannot access the Internet
through a wireless network or a LAN. To enable the devices or the port, follow the steps in Disabling Built-in Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Networking (LAN/Wireless LAN)
177
Why is the data transfer speed slow?
❑ The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other
factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed,
move your computer away from obstacles or closer to any access point you may be using.
❑ If you are using a wireless LAN access point, the device may be temporarily overloaded depending on how many other
devices are communicating via the access point.
❑ If your access point interferes with other access points, change the access point channel. See the manual that came with
your access point for more information.
❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot
How do I avoid data transfer interruptions?
❑ While your computer is connected to an access point, data transfer interruptions may occur if a large file is exchanged or
the computer is placed in close proximity to microwaves and cordless telephones.
❑ Move your computer closer to the access point.
❑ Make sure the access point connection is intact.
❑ Change the access point channel. See the manual that came with your access point for more information.
❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Networking (LAN/Wireless LAN)
178
What are channels?
❑ Wireless LAN communication uses divided frequency bands known as channels. Third-party wireless LAN access point
channels may be preset to different channels from Sony devices.
❑ If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your
access point.
Why does the network connection stop when I change the encryption key?
Two computers with the wireless LAN function may lose a peer-to-peer network connection if the encryption key is changed.
You can either change the encryption key back to the original profile or re-enter the key on both computers so the key
matches.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Wireless WAN
179
Wireless WAN
What should I do if my computer cannot connect to the wireless WAN?
❑ Make sure the battery pack is installed properly and charged.
❑ Make sure the SIM card is 3G data enabled and activated by your telecom operator. When inserting the SIM card, be sure
❑ Your mobile phone network needs to cover your area. Contact your network provider for information on the network
coverage.
❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.
❑ Make sure the switch next to Wireless WAN is set to On in the VAIO Smart Network window.
❑ Make sure that the Access Point Name (APN) is properly configured in your connection manager software. If not, contact
your telecom operator to get the correct APN to use. See the help file included with the connection manager software for
more information about the APN configuration.
❑ Check that your connection manager software has detected the wireless WAN modem successfully. It may take some
time for the software to detect the wireless WAN modem.
✍
For further information on the wireless WAN function, visit the VAIO support web site.
❑ Make sure the SIM card cover is closed.
❑ If you have disabled the wireless devices in the BIOS setup screen, you cannot access the Internet through a wireless
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
BLUETOOTH Technology
180
BLUETOOTH Technology
What should I do if other BLUETOOTH devices cannot find my computer?
❑ Make sure both devices have the BLUETOOTH function enabled.
❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.
❑ You cannot use the BLUETOOTH function while your computer is in a power saving mode. Bring the computer back to
Normal mode, then turn on the WIRELESS switch.
❑ Your computer and the device may be too far apart. Wireless BLUETOOTH technology works best when the devices are
within 10 meters of each other.
❑ If you have disabled the wireless devices in the BIOS setup screen, you cannot use the BLUETOOTH function. To enable
What should I do if I cannot find the BLUETOOTH device I want to communicate with?
❑ Check that the BLUETOOTH function of the device you want to communicate with is on. See the other device's manual
for more information.
❑ If the device you want to communicate with is already communicating with another BLUETOOTH device, it may not be
found or it may not be able to communicate with your computer.
❑ To allow other BLUETOOTH devices to communicate with your computer, follow these steps:
1
2
3
Click Start and Devices and Printers.
Right-click the BLUETOOTH device icon and click Bluetooth settings.
Click the Options tab and select the Allow Bluetooth devices to find this computer check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
BLUETOOTH Technology
181
What should I do if other BLUETOOTH devices cannot connect to my computer?
❑ Check the suggestions in What should I do if I cannot find the BLUETOOTH device I want to communicate with?
❑ Make sure the other devices are authenticated.
❑ The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on
radio wave quality, and on the operating system or the software in use. Move your computer and BLUETOOTH devices
closer to each other.
❑ If you have disabled the wireless devices in the BIOS setup screen, you cannot use the BLUETOOTH function. To enable
Why is my BLUETOOTH connection slow?
❑ The data transfer speed depends on the obstructions and/or the distance between the two devices, on the radio wave
quality, and on the operating system or the software in use. Move your computer and BLUETOOTH devices closer to each
other.
❑ The 2.4 GHz band, with which BLUETOOTH devices or wireless LAN devices work, is used by various devices. Although
BLUETOOTH devices use the technology to minimize radio interference from other devices that use the same band, such
radio interference may cause slower communication speeds and shorter distances or communication failures.
❑ If a version of a BLUETOOTH standard employed on the BLUETOOTH device with which you want to communicate is not
the same version as the one employed on your computer, the communication speed becomes slower.
❑ High-speed communications between your computer and BLUETOOTH devices are available when they are compliant
with BLUETOOTH high speed technology. For the high-speed communications, enable both the wireless LAN and
BLUETOOTH functions on the computer.
!
Some BLUETOOTH profiles do not support high-speed communications.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
BLUETOOTH Technology
182
Can I use a device with BLUETOOTH technology on airplanes?
With BLUETOOTH technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals
and airplanes, may have restrictions on use of BLUETOOTH devices to avoid radio interference. Check with facility staff to
see if use of the BLUETOOTH function on the computer is permitted.
Why can't I use the BLUETOOTH function when I log onto my computer as a user with a
standard user account?
The BLUETOOTH function may not be available to a user with a standard user account on your computer. Log onto the
computer as a user with administrative rights.
Why can't I use the BLUETOOTH devices when I switch users?
If you switch users without logging off your system, the BLUETOOTH devices will not work. Be sure to log off before switching
users. To log off your system, click Start, the arrow next to the Shut down button, and Log off.
Why can't I exchange business card data with a mobile phone?
The business card exchange function is not supported.
What should I do if the BLUETOOTH icon is not displayed on the taskbar?
❑ Make sure that the switch next to BLUETOOTH is set to On in the VAIO Smart Network window.
❑ To display the BLUETOOTH icon on the taskbar, follow these steps:
1
2
3
Click Start and Devices and Printers.
Right-click the BLUETOOTH device icon and click Bluetooth settings.
Click the Options tab and select the Show the Bluetooth icon in the notification area check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Optical Discs
183
Optical Discs
Why does my computer freeze when I try to read a disc?
The disc that your computer is trying to read may be dirty or damaged. Follow these steps:
1
Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
!
Turning off your computer with the Ctrl+Alt+Delete keys may cause loss of unsaved data.
2
3
Remove the disc from the optical disc drive.
Check the disc for dirt or damage. If you need to clean the disc, see Discs (page 146) for instructions.
What should I do if the drive tray does not open?
❑ Make sure your computer is in Normal mode.
❑ Press the drive eject button.
❑ The optical disc drive on your computer may have been disabled in the BIOS setup screen. Follow the steps in Disabling
❑ If the drive eject button does not work, click Start and Computer, right-click the optical disc drive icon, and select Eject.
❑ If none of the above options work, insert a thin, straight object (such as a paper clip) into the manual eject hole on the
optical disc drive.
❑ Try restarting your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Optical Discs
184
What should I do if I cannot play a disc properly on my computer?
❑ Make sure the disc is inserted into the optical disc drive with the label facing upward.
❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions.
❑ Blu-ray Disc playback on a connected external display may be interrupted, depending on the type or bit rate of the video.
You may be able to solve this problem by lowering the screen resolution of the display. Follow the steps in Why doesn't
❑ If a disc is dirty or damaged, your computer will stop responding. Follow these steps:
1
Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
!
Turning off your computer with the Ctrl+Alt+Delete keys may cause loss of unsaved data.
2
3
Remove the disc from the optical disc drive.
Check the disc for dirt or damage. If you need to clean the disc, see Discs (page 146) for instructions.
❑ If you are playing a disc and cannot hear sound, do any of the following:
❑ The volume may have been turned off by the Fn+F2 keys. Press them once again.
❑ The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud
enough to hear sound.
❑ Right-click the volume icon on the taskbar and click Open Volume Mixer to check the settings.
❑ Check the volume setting in the audio mixer.
❑ If you are using external speakers, check the volume settings on the speakers and the connections between the
speakers and your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Optical Discs
185
❑ Make sure the correct driver software is installed. Follow these steps:
1
2
3
4
Click Start and Control Panel.
Click System and Security.
Click System.
Click Device Manager in the left pane.
The Device Manager window appears with a listing of your computer's hardware devices.
If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the driver
software.
5
6
Double-click the optical disc drive device to open a list of the optical disc drives of your computer.
Double-click your desired drive.
You can confirm the driver software by selecting the Driver tab, and clicking Driver Details.
7
Click OK to close the window.
❑ Make sure an adhesive label is not affixed to a disc. Adhesive labels can come off while the disc is in the optical disc drive
and damage the drive or cause it to malfunction.
❑ If a region code warning appears, the disc may be incompatible with the optical disc drive. Check the package to make
sure the region code is compatible with the optical disc drive.
❑ If you notice condensation on your computer, do not use the computer for at least one hour. Condensation can cause the
computer to malfunction.
❑ Make sure your computer is running on AC power and try the disc again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Optical Discs
186
What should I do if I cannot play Blu-ray Disc media or my computer becomes unstable
during Blu-ray Disc playback?
❑ Check if your optical disc drive supports the Blu-ray Disc media.
❑ To play copyright protected Blu-ray Disc media continually, you need to update the AACS key. If a message prompts you
to update the AACS key, follow the message.
!
Your computer must be connected to the Internet to update the AACS key.
❑ You may not be able to play some Blu-ray Disc content on your computer, or the computer may become unstable during
Blu-ray Disc playback. To play content normally, download and install the latest updates for Blu-ray Disc playback software
using the VAIO Update.
What should I do if I cannot write data to CD media?
❑ Make sure you neither launch any software application nor allow any to launch automatically, not even a screen saver.
❑ If you are using a CD-R/RW disc with an adhesive label affixed, replace it with one with no affixed adhesive label. Using
a disc with an affixed adhesive label could cause a write error or other damage.
What should I do if I cannot write data to DVD media?
❑ Make sure you are using the correct DVD recordable media.
❑ Check which DVD recordable format is compatible with your optical disc drive. Some brands of DVD recordable media do
not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Optical Discs
187
Why can't I write data to Blu-ray Disc media?
❑ Check if your optical disc drive supports the Blu-ray Disc writing function.
❑ BD-R Disc media are not rewritable. You cannot add or erase data to or from the BD-R Disc media.
What should I do if my external optical disc drive does not work properly?
Make sure that your external optical disc drive is connected to an AC power source and the USB port. If it is not connected,
the external optical disc drive may not work properly.
!
You cannot use USB devices if you disable the USB ports in the BIOS setup screen. To enable the ports, follow the steps in Disabling Built-in Devices
What should I do if I cannot play discs?
The optical disc drive on your computer may have been disabled in the BIOS setup screen. Follow the steps in Disabling
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Display
188
Display
Why did my screen go blank?
❑ Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If
the computer is in LCD (Video) Sleep mode, press any key to bring the computer back into Normal mode. See Using the
❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.
❑ If your computer is running on battery power, make sure the battery pack is installed properly and is charged. See Using
❑ If the display output is directed to the external display, press the Fn+F7 keys. See Combinations and Functions with
❑ While a performance selection is in progress, your computer screen may go blank or temporarily show some noise or
flicker. This is normal and does not indicate a malfunction.
❑ If the screen refresh rate has been changed, your computer screen may go blank or temporarily show some noise or
flicker. This is normal and does not indicate a malfunction. To check the screen refresh rate, follow these steps:
1
2
3
4
5
6
Click Start, All Programs, and VAIO Control Center.
Click Power Options under Power Management in the left pane.
Click Advanced in the Power Options window.
Click Change plan setting.
Click Change advanced power settings.
Click the VAIO Power Management tab.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Display
189
What should I do if I do not see proper images or videos?
❑ Be sure to select True Color (32 bit) for the display colors before using video/image software or starting DVD playback.
Selecting any other option may prevent such software from displaying images successfully. To change the display colors,
follow these steps:
1
2
3
4
Right-click on the desktop and select Screen resolution.
Click Advanced settings.
Click the Monitor tab.
Select True Color (32 bit) under Colors.
❑ Do not change the display resolution or colors while using video/image software or playing DVDs, as it may cause
unsuccessful playback/display or unstable system operations.
Additionally, it is recommended you disable your screen saver before starting DVD playback. If the screen saver is
enabled, it may be activated during DVD playback and prevent the playback from running successfully. Some screen
savers have been found to even change the display resolution and colors.
❑ The screen refresh rate may have been changed. The higher screen refresh rate enables the smoother video playback.
To change the screen refresh rate, follow these steps:
1
2
3
4
5
6
7
Click Start, All Programs, and VAIO Control Center.
Click Power Options under Power Management in the left pane.
Click Advanced in the Power Options window.
Click Change plan setting.
Click Change advanced power settings.
Click the VAIO Power Management tab.
Change the screen refresh rate.
!
Selecting the higher screen refresh rate may consume more battery power.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Display
190
What should I do if some items do not fit on the computer screen?
Check that the text size is set to 100%. If not, some items, for example a software menu, may not be displayed correctly,
depending on the software you are using. See Windows Help and Support for more information on how to change the text
size.
What should I do if no image is displayed on my TV screen or external display connected
to the HDMI output port?
❑ Make sure you are using an HDCP-compliant display. The copyright protected content is not displayed on a non-HDCP
compliant display. See Connecting a TV with an HDMI Input Port (page 111) or Connecting a Computer Display or
❑ Another external display may be connected to the monitor port on your computer or the port replicator. Press the Fn+F7
keys to change the display output. See Connecting a TV with an HDMI Input Port (page 111) or Connecting a
What should I do if 3D images are not displayed on my 3D TV connected to the HDMI
output port?
❑ Change the 3D playback settings. To change the settings, click
located at the lower right corner of the PowerDVD BD
window. See the help file included with the PowerDVD BD for more information.
❑ If the computer is connected to your 3D TV through an AV amplifier, make sure the AV amplifier supports 3D playback.
❑ Check the HDMI output resolution settings on the computer. If the resolution is not set to 1920 x 1080 or 1280 x 720,
images are not displayed in 3D.
❑ You should also see the manual that came with your 3D TV for more information on 3D playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Display
191
Why doesn't my screen display a video?
❑ If the display output is directed to the external display and the external display is disconnected, you cannot display a video
on your computer screen. Stop video playback, change the display output to the computer screen, and then restart video
playback. See Selecting Display Modes (page 116) for changing the display output. Alternatively, you can press the
Fn+F7 keys to change the display output. See Combinations and Functions with the Fn Key (page 39) for more
information.
❑ The video memory of your computer may be insufficient for displaying high resolution videos. In such a case, lower the
resolution of the LCD screen.
To change the screen resolution, follow these steps:
1
2
3
Right-click on the desktop and select Screen resolution.
Click the drop-down list next to Resolution.
Move the slider up to increase or down to decrease the screen resolution.
✍
You can check the total amount of the graphics and video memory available. Right-click on the desktop, select Screen resolution, and click Advanced
Settings and the Adapter tab. The displayed value may be different from the actual amount of memory on your computer.
How do I change the LCD brightness?
Press the Fn+F5 keys or Fn+F6 keys to change the LCD brightness of your computer screen. See Combinations and
What should I do if my screen is dark?
Blocking the ambient light sensor turns your screen dark. Make sure that the sensor is unblocked.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Display
192
Why does the LCD brightness change automatically?
The LCD brightness of your computer screen changes automatically according to ambient light intensity that is measured by
the ambient light sensor. To disable the automatic brightness settings, follow these steps:
1
2
3
4
Click Start, All Programs, and VAIO Control Center.
Click Display and Automatic Brightness Settings.
Click to cancel the Adjust brightness automatically check box.
Click OK.
What should I do if the external display remains blank?
Press the Fn+F7 keys to change the display output. See Combinations and Functions with the Fn Key (page 39) for more
information.
How do I run Windows Aero?
To run Windows Aero, follow these steps:
1
2
Right-click on the desktop and select Personalize.
Select your desired theme from Aero Themes.
For information about the Windows Aero features, such as Windows Flip 3D, see Windows Help and Support.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Printing
193
Printing
What should I do if I cannot print a document?
❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer.
❑ Make sure your printer is compatible with the Windows operating system installed on your computer.
❑ You may need to install the printer driver software before you use your printer. See the manual that came with your printer
for more information.
❑ If your printer is not functioning after your computer resumes from a power saving mode (Sleep or Hibernate), then restart
the computer.
❑ If the bidirectional communication functions are provided with your printer, disabling the functions on your computer may
enable printing. Follow these steps:
1
2
3
4
5
Click Start and Devices and Printers.
Right-click the printer icon and select Properties.
Click the Ports tab.
Click to cancel the Enable bidirectional support check box.
Click OK.
This disables the bidirectional communication functions of the printer, such as data transfer, status monitoring, and
remote panel.
When your printer is connected to the optional port replicator, check to see if the port replicator is connected to an AC
power source.
❑ If you have disabled the USB ports in the BIOS setup screen, you cannot use the printer connected to one of the USB
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Microphone
194
Microphone
What should I do if my microphone does not work?
❑ Your computer is not equipped with the microphone jack. You cannot use an external microphone.
❑ Your sound input device may have been incorrectly configured. To configure the sound input device, follow these steps:
1
2
3
4
5
Close all open programs.
Click Start and Control Panel.
Click Hardware and Sound.
Click Manage audio devices under Sound.
On the Recording tab, select your desired device for sound input and click Set Default.
How can I prevent microphone feedback?
Microphone feedback occurs when the microphone receives the sound from a sound output device, such as a speaker.
To prevent this problem:
❑ Keep the microphone away from a sound output device.
❑ Turn down the volume of the speakers and the microphone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Speakers
195
Speakers
What should I do if I do not hear sound from the built-in speakers?
❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the
program's help file for more information.
❑ The volume may have been turned off by the Fn+F2 keys. Press them once again.
❑ The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud
enough to hear sound.
❑ Check the Windows volume controls by clicking the volume icon on the taskbar.
❑ Your sound output device may have been incorrectly configured. To change the sound output device, see How do I
Why is sound from the built-in speakers distorted?
Depending on the Dolby playback mode, sound from the built-in speakers may be distorted during playback with the volume
level close to the maximum. In such a case, follow these steps to select the proper playback mode according to the playback
sound.
1
2
3
4
5
6
Click Start and Control Panel.
Click Hardware and Sound.
Click Manage audio devices under Sound.
On the Playback tab, select Speaker/Headphones and click Properties.
Click the Dolby tab.
Select the proper playback mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Speakers
196
What should I do if my external speakers do not work?
❑ Check the suggestions in What should I do if I do not hear sound from the built-in speakers? (page 195).
❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the
program's help file for more information.
❑ Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound.
❑ Make sure your speakers are designed for computer use.
❑ If your speakers have a muting button, set the button to off.
❑ If your speakers require external power, make sure the speakers are connected to a power source. See the manual that
came with your speakers for more information.
❑ Check the Windows volume controls by clicking the volume icon on the taskbar.
❑ Your sound output device may have been incorrectly configured. To change the sound output device, see How do I
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Touch Pad
197
Touch Pad
What should I do if the touch pad does not work?
❑ You may have disabled the touch pad. Press the Fn+F1 keys to enable it. See Using the Touch Pad (page 42).
❑ Make sure that a mouse is not connected to your computer.
❑ If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window.
❑ If the Alt+F4 keys do not work, press the Windows key once and then the , key several times, select Restart with the
M or m key, and press the Enter key to restart your computer.
❑ If your computer does not restart, press the Ctrl+Alt+Delete keys, select the arrow next to the Shut down button with the
m and , keys, press the Enter key, select Restart with the M or m key, and press the Enter key to restart your computer.
❑ If this procedure does not work, press and hold the power button until the computer turns off.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Keyboard
198
Keyboard
What should I do if the keyboard configuration is wrong?
The language layout of your computer's keyboard is labeled on the packaging box. If you choose a different regional keyboard
when you complete the Windows setup, the key configuration will be mismatched.
To change the keyboard configuration, follow these steps:
1
2
Click Start and Control Panel.
Click Clock, Language, and Region, and then Change keyboards or other input methods under Region and
Language.
3
4
Click Change keyboards on the Keyboards and Languages tab.
Change the settings as desired.
What should I do if I cannot enter certain characters with the keyboard?
On models without the numeric keypad, if you cannot enter U, I, O, P, J, K, L, M, and so on, the Num Lk key may be activated.
Check that the Num lock indicator light is unlit. If the Num lock indicator is lit, press the Fn+Num Lk keys to turn it off before
entering these characters.
What should I do if I cannot use the numeric keypad to enter numbers?
On models with the numeric keypad, if you cannot use the numeric keypad, Num Lk mode may not be activated. Check if the
Num lock indicator light is unlit. If the indicator light is unlit, press the Num Lk key to turn it on before entering numerals.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Floppy Disks
199
Floppy Disks
Why doesn't the Safely Remove Hardware and Eject Media icon appear on the taskbar
when the drive is connected?
❑ Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB
port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still
does not appear, follow these steps:
1
2
3
4
5
Close all programs that are accessing the floppy disk drive.
Wait until the indicator light on the floppy disk drive turns off.
Push the eject button to remove the disk, and unplug the USB floppy disk drive from your computer.
Reconnect the floppy disk drive by plugging the USB cable into the USB port.
Restart the computer by clicking Start, the arrow next to the Shut down button, and Restart.
❑ If you have disabled the USB ports in the BIOS setup screen, you cannot use the USB floppy disk drive connected to one
What should I do if I cannot write data to a floppy disk?
❑ Make sure the floppy disk is properly inserted in the drive.
❑ If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can
either use a floppy disk that is not write-protected or disable the write-protect feature.
❑ If you have disabled the USB ports in the BIOS setup screen, you cannot write data to the floppy disk in the external disk
drive connected to one of the USB ports. To enable the ports, follow the steps in Disabling Built-in Devices (page 133).
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Audio/Video
200
Audio/Video
How do I turn off the Windows startup sound?
To turn off the Windows startup sound, follow these steps:
1
2
3
4
5
Click Start and Control Panel.
Click Hardware and Sound.
Click Manage audio devices under Sound.
On the Sounds tab, click to cancel the Play Windows Startup sound check box.
Click OK.
How do I change the sound output device?
If you do not hear sound from the device connected to a port, such as the USB port, HDMI output port, optical output port, or
headphones jack, you need to change the device for sound output.
1
2
3
4
5
Close all open programs.
Click Start and Control Panel.
Click Hardware and Sound.
Click Manage audio devices under Sound.
On the Playback tab, select your desired device for sound output and click Set Default.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Audio/Video
201
What should I do if I do not hear the sound from the sound output device connected to the
HDMI output port, optical output port, or headphones jack?
❑ You need to change the sound output device if you want to hear sound from the device connected to a port, such as the
HDMI output port, optical output port, or headphones jack. For the detailed procedure, see How do I change the sound
❑ If you still hear no sound from the sound output device, follow these steps:
1
2
3
4
5
On the Playback tab, select the HDMI or S/PDIF icon and click Properties.
Click the Advanced tab.
Select the sample rate and bit depth (for example, 48000 Hz, 16 bit) which the device supports.
Click OK.
Why do sound interruptions and/or dropped frames occur when I play high-definition
videos, such as those recorded with the AVCHD digital video camcorder?
Playing high-definition videos requires substantial hardware resources, such as CPU, GPU, or system memory performance
on your computer. During the video playback, some operations and/or functions may become unavailable, and sound
interruptions, dropped frames, and playback failure may occur depending on the configuration of your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
"Memory Stick"
202
"Memory Stick"
What should I do if I cannot use "Memory Stick" that was formatted on a VAIO computer
on other devices?
You may need to reformat your "Memory Stick".
Formatting "Memory Stick" erases all data, including music data previously saved on it. Before you reformat "Memory Stick",
back up important data and confirm that "Memory Stick" does not contain files you want to keep.
1
2
Copy the data from "Memory Stick" onto your built-in storage device to save data or images.
Can I copy images from a digital camera using "Memory Stick"?
Yes, and you can view video clips that you have recorded with digital cameras that are compatible with "Memory Stick".
Why can't I write data to "Memory Stick"?
❑ Some versions of "Memory Stick" are equipped with an erasure prevention switch to protect data from unintentional
erasure or overwriting. Make sure the erasure prevention switch is off.
❑ If you have disabled the "Memory Stick Duo" slot in the BIOS setup screen, you cannot use "Memory Stick" in the slot. To
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting >
Peripherals
203
Peripherals
What should I do if I cannot connect a USB device?
❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital
camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to an
AC outlet.
❑ Try using another USB port. The driver software could be installed to the specific port you used the first time you
connected the device.
❑ See the manual that came with your USB device for more information. You may need to install software before you connect
the device.
❑ Try connecting a simple, low-powered device such as a mouse to test if the port is working at all.
❑ USB hubs may prevent a device from working because of a power distribution failure. We recommend you connect the
device directly to your computer without a hub.
❑ If you have disabled the USB ports in the BIOS setup screen, you cannot use any connected USB devices. To enable the
What should I do if I cannot use a peripheral device?
The USB ports may have been disabled in the BIOS setup screen. To enable the ports, follow the steps in Disabling Built-
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks >
204
Trademarks
SONY and the SONY logo are registered trademarks of Sony Corporation.
VAIO, the VAIO logo and other Sony product or service names are trademarks or registered trademarks of Sony Corporation
or any of its affiliates.
i.LINK is a name to denote IEEE 1394.
Intel, Pentium, Intel SpeedStep, and Atom are trademarks or registered trademarks of Intel Corporation.
Microsoft, Windows, Windows Vista, BitLocker, Aero, and the Windows logo are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, the Blu-ray Disc logo, and the Blu-ray 3D logo are trademarks of the Blu-ray Disc
Association.
The BLUETOOTH word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.
Roxio Easy Media Creator is a trademark of Sonic Solutions.
WinDVD is trademark of Corel Inc.
PowerDVD is trademark of CyberLink.Inc.
NVIDIA and 3D Vision are registered trademarks and/or trademarks of NVIDIA Corporation in the United States and other
countries.
ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of
ArcSoft, Inc.
AMD, the AMD Arrow logo, ATI, and combinations thereof, Radeon, AMD Phenom, AMD Turion, AMD Athlon, AMD
Virtualization, AMD-V are trademarks of Advanced Micro Devices, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks >
205
SD Logo is a trademark.
SDHC Logo is a trademark.
SDXC Logo is a trademark.
The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under
license. Other trademarks and trade names are those of their respective owners.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC.
CompactFlash® is a trademark of SanDisk Corporation.
"PlaceEngine" is a registered trademark of Koozyt, Inc.
"PlaceEngine" was developed by Sony Computer Science Laboratories, Inc. and is licensed by Koozyt, Inc.
"AVCHD" is a trademark of Panasonic Corporation and Sony Corporation.
All other names of systems, products, and services are trademarks of their respective owners. In the manual, the ™ or ®
marks are not specified.
Features and specifications are subject to change without notice.
All other trademarks are trademarks of their respective owners.
Not all the software listed above may be delivered with your model.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice >
206
Notice
© 2011 Sony Corporation. All rights reserved.
This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any
machine-readable form without prior written approval.
Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and
hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this
manual, the software, or such other information. In no event shall Sony Corporation be liable for any incidental, consequential,
or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the
software, or other information contained herein or the use thereof.
In the manual, the ™ or ® marks are not specified.
Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time
without notice. The software described herein is governed by the terms of a separate user license agreement.
Sony Corporation is not liable and will not compensate for any lost recordings made to your computer, external recording
media, or recording devices or any relevant losses, including when recordings are not made due to reasons including your
computer failure, or when the contents of a recording are lost or damaged as a result of your computer failure or repair
undertaken to your computer. Sony Corporation will not restore, recover, or replicate the recorded contents made to your
computer, external recording media, or recording devices under any circumstances.
Download from Www.Somanuals.com. All Manuals Search And Download.
|