Sony MiniDisc Player MDX C5970 User Manual
MDX-C5960R/C5970/C5970R  
SERVICE MANUAL  
German Model  
MDX-C5960R  
US Model  
Canadian Model  
E Model  
MDX-C5970  
AEP Model  
UK Model  
MDX-C5970R  
Photo: MDX-C5960R  
Model Name Using Similar Mechanism MDX-C7900/C7900R  
Base Mechanism Type  
Optical Pick-Up Name  
MG-164N-138  
KMS-241B/J1NP  
SPECIFICATIONS  
– Continued on next page –  
DISC PLAYER  
MICROFILM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
1. GENERAL  
Location of controls ........................................................  
Resetting the unit ............................................................  
Detaching the front panel................................................  
Labelling the rotary commander.....................................  
Using the rotary commander ..........................................  
Adjusting the sound characterisitics ...............................  
Attenuating the sound .....................................................  
Changing the sound and display settings .......................  
Boosting the bass sound..................................................  
Installation .......................................................................  
Connections .....................................................................  
4
5
5
5
5
5
5
5
5
6
7
2. DISASSEMBLY ......................................................... 10  
3. ELECTRICAL ADJUSTMENTS......................... 16  
Test Mode ........................................................................ 16  
MD Section ..................................................................... 16  
Tuner Section .................................................................. 16  
4. DIAGRAMS  
4-1. Block Diagram – SERVO Section – ............................... 19  
4-2. Block Diagram – TUNER Section – .............................. 21  
4-3. Block Diagram – MAIN Section – ................................. 23  
4-4. Block Diagram  
– DISPLAY/KEY CONTROL Section –........................ 25  
4-5. Block Diagram – BUS CONTROL/  
POWER SUPPLY Section – ........................................... 27  
4-6. Notes for Printed Wiring Boards and  
Schematic Diagrams ....................................................... 29  
4-7. Printed Wiring Board – SERVO Board – ....................... 31  
4-8. Schematic Diagram – SERVO Board (1/3) – ................. 33  
4-9. Schematic Diagram – SERVO Board (2/3) – ................. 35  
4-10. Schematic Diagram – SERVO Board (3/3) – ................. 37  
4-11. Printed Wiring Board  
– MAIN Board (Component Side) – .............................. 39  
4-12. Printed Wiring Board  
– MAIN Board (Conductor Side) – ................................ 41  
4-13. Schematic Diagram – MAIN Board (1/4) – ................... 43  
4-14. Schematic Diagram – MAIN Board (2/4) – ................... 45  
4-15. Schematic Diagram – MAIN Board (3/4) – ................... 47  
4-16. Schematic Diagram – MAIN Board (4/4) – ................... 49  
4-17. Printed Wiring Board – KEY Board – ............................ 51  
4-18. Schematic Diagram – KEY Board – .............................. 53  
4-19. IC Pin Function Description ........................................... 62  
5. EXPLODED VIEWS ................................................ 72  
6. ELECTRICAL PARTS LIST ............................... 76  
– 3 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 1  
GENERAL  
This section is extracted from  
instruction manual.  
– 4 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– 5 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– 7 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– 8 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– 9 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2  
DISASSEMBLY  
Note: Follow the disassembly procedure in the numerical order given.  
SUB PANEL  
2 sub panel  
1 five screws  
(PTT2.6 × 6)  
1 screw  
(PTT2.6 × 6)  
MECHANISM DECK (MG-164N-138)  
1 two screws  
(PTT2.6 × 4)  
3 mechanism deck  
(MG-164N-138)  
2 connector  
(CN200)  
Download from Www.Som–anu1a0ls.c–om. All Manuals Search And Download.  
MAIN BOARD, HEAT SINK  
5 eight screws  
(PTT2.6 × 10)  
2 three screws  
(PTT2.6 × 6) (ground point)  
1 two screws  
(PTT2.6 × 10)  
6 heat sink  
3 main board  
4 insulating sheet  
SERVO BOARD  
2 two screws  
(BVTT2 × 4)  
2 two screws  
(BVTT2 × 4)  
3 servo board  
1 sensor flexible board  
(CN102)  
1 flexible board  
(CN103)  
– 11 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MD COVER ASS’Y  
1 four screws  
(B2 × 3)  
3 MD cover ass’y  
shaft (MD cover guide)  
cassette holder  
A
2 Pushing the Cassette Holder toward the direction A with a  
screwdriver, etc., disengage the Shaft (MD Cover Guide) from  
the slot in the MD Cover Assy.  
Note: Take care not to scratch the optiocal Pick-up when pushing  
the Cassette Holder with a screwdriver. etc.  
FLOAT BLOCK  
3 Pushing an arrow A part, raise the float block  
up ward at the front to release a lock.  
1 tension spring (FL2)  
A
float block  
lever (lock R)  
lever (lock L)  
1 tension spring (FL2)  
2 two tension springs (FLOAT F)  
Download from Www.Som–anu1a2ls.c–om. All Manuals Search And Download.  
LO MOTOR ASS’Y (LOADING) (M903)  
4 Remove the bracket (LO)  
in the direction of the arrow A.  
A
5 LO motor ass’y (loading)  
1 Remove solders of motor (M903)  
(M903)  
2 tension spring (rack)  
3 claw  
LEVER (LE) ASS’Y  
2 stopper washer  
2 lever (LE) ass’y  
3 roller (GLE)  
1
– 13 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOLDER ASS’Y  
4 Remove the holder ass’y in the  
direction of the arrow.  
2 type-E stopring 1.5  
1 spring (CHKG)  
2 type-E stopring 1.5  
2 type-E stopring 1.5  
3 lever (lock R)  
3 lever (lock L)  
1 spring (CHKG)  
2 type-E stopring 1.5  
CHUCKING ARM ASS’Y  
1 Remove the chucking arm ass’y  
in the direction of the arrow.  
holder ass’y  
Download from Www.Som–anu1a4ls.c–om. All Manuals Search And Download.  
OPTICAL PICK-UP (KMS-241B/J1NP)  
4 screw  
(B2 × 3)  
6 bearing (SL)  
5 feed screw ass’y  
7 optical pick-up  
(KMS-241B/J1NP)  
3 screw  
(K2 × 3)  
1 two screws  
(K2 × 3)  
2 shaft (SL2)  
SL MOTOR ASS’Y (SLED) (M902), SP MOTOR ASS’Y (SPINDLE) (M901)  
4 screw  
(P1.7 × 1.8)  
9 two screws  
(P1.7 × 1.8)  
5 bracket (SL)  
2 two screws  
(2 × 8)  
6 SL motor ass’y  
(sled) (M902)  
!º retainer (SP)  
7 screw  
3 sensor board  
(B2 × 3)  
!¡ SP motor ass’y  
8 base (SL)  
(spindle) (M901)  
1 Remove solders of motors  
(M901, M902)  
– 15 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 3  
ELECTRICAL ADJUSTMENTS  
TEST MODE  
3. Adjust with the volume RV2 on TU1 so that the “FM” indica-  
tion turns to “FM0” indication on the display window.  
But, in case of already indicated “FM0”, turn the RV2 so that  
put out light “0” indication and adjustment.  
This set have the test mode function. In the test mode, FM Auto  
Scan/Stop Level andAM (MW)Auto Scan/Stop Level adjustments  
can be performed easier than it in ordinary procedure.  
<Set the Test Mode>  
Display  
1. Turn ON the regulated power supply. (The clock is displayed)  
Note: Press the [OFF] button, if the clock is not displayed.  
2. Push the preset [4] button.  
SHUF  
*1  
3. Push the preset [5] button.  
4. Press the preset [1] button for more than two seconds.  
5. Then the display indicates all lights, the test mode is set.  
*1: MDX-C5960R/C5970R indicate “98.00”.  
<Release the Test mode>  
Adjustment Location: See page 18.  
1. Push the [OFF] button.  
FM Stereo Separation Adjustment  
Setting:  
See the adjustment location from on page 18 for the ad-  
justment.  
[SOURCE] button: FM  
FREQUENCY SELECT switch: FM 200 k (E model)  
MD SECTION  
FM RF signal  
generator  
level meter  
antenna jack (J1)  
0.01 µF  
MD section adjustments are done automatically in this set.  
10 kΩ  
+
–
TUNER SECTION  
0 dB=1 µV  
set  
Cautions during repair  
When the tuner unit is defective, replace it by a new one be-  
cause its internal block is difficult to repair.  
LINE OUT jack (CNP300)  
MDX-C5960R/  
C5970R  
MDX-C5970  
Note:  
Carrier frequency  
Output level  
Mode  
97.9 MHz  
60 dB (1 mV)  
stereo  
98.0 MHz  
Adjust the tuner section in the sequence shown below.  
1. FM Auto Scan/Stop Level Adjustment.  
2. FM Stereo Separation Adjustmnet.  
3. AM (MW) Auto Scan/Stop Level Adjustment.  
4. RDS S-Meter Adjustment. (MDX-C5960R/5970R)  
70 dB (3.2 mV)  
stereo  
1 kHz, 33.75 kHz  
deviation (45%)  
1 kHz, 16.25 kHz  
deviation (21.7%)  
main  
Modulation sub  
1 kHz, 33.75 kHz  
deviation (45%)  
1 kHz, 16.25 kHz  
deviation (21.7%)  
FM Auto Scan/Stop Level Adjustment  
Setting:  
19 kHz  
pilot  
7.5 kHz  
deviation (10%)  
7.5 kHz  
deviation (10%)  
[SOURCE] button: FM  
FREQUENCY SELECT switch: FM 200 k (E model)  
FM RF signal  
generator  
Procedure:  
antenna jack (J1)  
FM Stereo  
signal generator  
output channel  
Level meter  
connection  
Level meter  
reading (dB)  
0.01 µF  
set  
L-CH  
R-CH  
R-CH  
L-CH  
L-CH  
L-CH  
R-CH  
R-CH  
A
Carrier frequency: 97.9 MHz (MDX-C5970)  
98.0 MHz (MDX-C5960R/C5970R)  
B
Adjust RV4 on TU1  
for minimum reading.  
Output level  
Mode  
: 22 dB (12.6 µV)  
: mono  
Modulation  
: 1 kHz, 22.5 kHz deviation (30%)  
C
D
Adjust RV4 on TU1  
for minimum reading.  
Procedure:  
1. Set to the test mode.  
2. Push the [SOURCE] button and set to FM.  
L-CH Stereo separation: A-B  
Display  
R-CH Stereo separation: C-D  
The separations of both channels should be equal.  
Specification: Separation more than 30 dB  
Adjustment Location: See page 18.  
SHUF  
*1  
Download from Www.Som–anu1a6ls.c–om. All Manuals Search And Download.  
AM (MW) Auto Scan/Stop Level Adjustment  
Setting:  
RDS S-Meter Adjustment (MDX-C5960R/C5970R)  
Setting:  
Adjustment Location:  
– SET UPPER VIEW –  
[MODE] button (MDX-C5970): AM  
[MODE] button (MDX-C5960R/C5970R): MW  
FREQUENCY SELECT switch: AM 10 k (E model)  
[SOURCE] button: FM  
FM RF signal  
generator  
antenna jack (J1)  
0.01 µF  
15 pF  
30 Ω  
set  
RV1 RDS S-Meter Adjustment  
(MDX-C5960R/C5970R)  
65 pF  
Carrier frequency: 98.0 MHz  
Output level  
Mode  
: 35 dB (56.2 µV)  
AM RF signal  
generator  
: mono  
TU1  
Modulation  
: no modulation  
AM dummy antenna  
(50 Ω)  
Procedure:  
1. Set to the test mode. (See page 16)  
set  
2. Push the [SOURCE] button and set to FM.  
antenna jack (J1)  
Carrier frequency: 1000 kHz (MDX-C5970)  
999 kHz (MDX-C5960R/5970R)  
30% amplitude  
modulation by  
1 kHz signal  
Display  
RV1 AM (MW) Auto Scan/Stop Level Adjustment  
RV2 FM Auto Scan/Stop Level Adjustment  
SHUF  
Output level  
: 33 dB (44.7 µV)  
Procedure:  
1. Set to the test mode. (See page 16)  
2. Push the [SOURCE] button and set to FM.  
3. Push the [MODE] button and set toAM (MDX-C5970) or MW  
(MDX-C5960R/C5970R).  
3. Push the preset [10] button.  
4. Adjust RV1 on MAIN board so that the display indication is  
“11.2”.  
RV4 FM Sereo Separation Adjustment  
Display  
SHUF  
Display  
*2  
SHUF  
*3  
TP  
*4  
Specification: Display indication : 10.8 to 11.6  
4. Adjust with the volume RV1 on TU1 so that the “AM” or “MW”  
indication turns to “AM0” or “MW0” indication on the dis-  
play window.  
Adjustment Location: See page 18.  
But, in case of already indicated “AM0” or “MW0”, turn the  
RV1 so that put out light “0” indication and adjustment.  
Display  
*2  
SHUF  
*3  
TP  
*4  
*2: MDX-C5960R/C5970R indicate “MW”.  
*3: MDX-C5960R/C5970R indicate “999”.  
*4: Only MDX-C5960R/C5970R indicate.  
Adjustment Location: See page 18.  
– 17 –  
– 18 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
SECTION 4  
DIAGRAMS  
15  
TX  
IC301 (1/2)  
4-1. BLOCK DIAGRAM – SERVO Section –  
• SIGNAL PATH  
: MD PLAY  
EFMO  
ADDT  
100  
23  
FILI  
DIGITAL SIGNAL PROCESSOR,  
EFM/ACIRC ENCODER/DECODER,  
SHOCK PROOF MEMORY CONTROLLER,  
ATRAC ENCODER/DECODER, 2M BIT D-RAM  
IC301 (1/2)  
59  
58  
61  
60  
PCO  
CLTV  
FILO  
PLL  
SAMPLING  
RATE  
CONVERTER  
RF AMP,  
FOCUS/TRACKING ERROR AMP  
IC302  
DIN  
DIGITAL  
AUDIO  
INTERFACE  
21  
22  
48 47  
DOUT  
ASYO  
51  
(Page 23)  
ASYI  
RFI  
52  
55  
I
I
DADT  
DADT, BCK, LRCK, FS256  
COMPA-  
RATOR  
1
2
RFO  
AGCI  
RF  
24  
A
RF AGC  
& EQ  
RF AMP  
46  
40  
38  
J
J
EQ  
26 25 27  
AUX  
B.P.F.  
33  
WBL  
D-RAM  
X301  
22.5792MHz  
OSCI  
512FS OSC  
IC304  
16  
17  
CLOCK  
GENERATOR  
3T  
TEMP  
PEAK  
BOTM  
F
OSCO  
37  
36  
PEAK &  
BOTTOM  
B
A
WBL  
C
D
B
A
SUBCODE  
PROCESSOR  
INTERNAL BUS  
I
J
ADIP  
DEMODULATOR/  
DECODER  
ADFM  
ADIN  
ADFG  
AT  
AMP  
29  
30  
32  
78  
79  
B.P.F.  
A
B
C
D
4
5
6
7
I-V  
AMP  
ABCD  
FE  
ABCD  
AMP  
E
35  
34  
DETECTOR  
CPU  
INTERFACE  
MONITOR  
CONTROL  
FOCUS  
ERROR AMP  
F0CNT  
SPINDLE  
SERVO  
C
D
TE  
SE  
E
F
E
F
8
9
26  
28  
I-V  
AMP  
TRACKING  
ERROR AMP  
94 93 10 12  
11  
14  
9
8
5
6
7
1
2
3
4
COMMAND  
LASER DIODE  
XOE  
XWE  
XRAS  
XCAS  
41  
45  
44  
42  
22  
3
OE  
5
13  
3
4
1
2
AUTOMATIC  
POWER  
CONTROL  
Q302  
WE  
RAS  
CAS  
SERIAL/  
PARALLEL  
CONVERTER,  
DECODER  
APC  
PD  
ILCC  
LD/PD  
AMP  
LEVEL SHIFT  
IC502  
LEVEL SHIFT  
IC503  
4
11  
10  
V-I  
23  
CONVERTER  
PD  
LD  
6
12  
PD  
D-RAM  
IC307  
12  
20  
16 17 18  
OPTICAL PICK-UP  
(KMS-241B/J1NP)  
+3.3V  
FOCUS/TRACKING COIL DRIVE,  
SPINDLE/SLED MOTOR DRIVE  
IC303  
(Page 23)  
RESET  
RESET, EMPHASIS  
PSB 16  
B
TH501  
ABCD  
PEAK HOLD  
Q301  
SPFD  
SPRD  
+3.3V  
6
8
OUT4F  
OUT4R  
IN4R  
IN4F  
3
4
M901  
(SPINDLE)  
IC306  
59  
62  
55  
54 52  
45 51 64  
26 27 28 29  
39  
66  
M
M
13  
RECP  
66 75 64 65 74 73 62 63  
LOCK  
LOCK  
21  
67  
C
(Page 23)  
APCREF  
AUTOMATIC  
POWER  
CONTROL  
83  
31  
32  
EXTAL  
XTAL  
MD MECHANISM CONTROLLER  
IC501 (1/2)  
MD-ATT  
SFDR  
SRDR  
ANALOG MUX  
X501  
10MHz  
A-MUTE  
56  
D
(Page 23)  
27 OUT2F  
25 OUT2R  
IN2F 29  
IN2R 30  
92  
91  
M902  
(SLED)  
A/D CONVERTER  
DIGITAL  
SERVO  
7
5
6
4
63  
11  
2-AXIS  
DEVICE  
SIGNAL  
PROCESS  
FROM CPU  
INTERFACE  
FCS+  
FFDR  
FRDR  
21 OUT1F  
23 OUT1R  
IN1F 19  
IN1R 18  
88  
89  
XLRF  
CKRF  
DTRF  
80  
81  
82  
LOADING  
MOTOR DRIVE  
IC305  
RIN FIN  
(LIMIT)  
AUTO  
SEQUENCER  
LOADING START/  
EJECT END  
LOADING  
END  
ON:When the optical pick-up is  
inner position.  
FCS–  
TRK+  
TRK–  
TFDR  
TRDR  
12 OUT3F  
10 OUT3R  
IN3F 14  
IN3R 15  
86  
85  
OUT1 OUT2  
ON:When completion of  
the disc loading.  
ON:When the disc loading start  
and the disc eject completion.  
DIGITAL SERVO  
SIGNAL PROCESSOR  
IC301 (2/2)  
1
7
M903  
05  
(LOADING)  
M
– 19 –  
– 20 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-2. BLOCK DIAGRAM – TUNER Section –  
FM B+  
AM B+  
TUNER B+  
FM/AM TUNER UNIT  
TU1  
J1  
8
10  
9
(FM/AM ANTENNA)  
FM  
2
1
FM-ANT  
AM-ANT  
FM-LCH 18  
(Page 23)  
E
FM-RCH  
16  
R-CH  
MUTING  
Q101  
AM  
AM-DET  
(Page 23)  
12  
F
4
5
6
21  
13  
11 20 22  
19  
23  
R-CH  
D5  
MUTING  
CONTROL SWITCH  
Q103  
(C5960R/C5970R)  
RV1  
(C5960R/C5970R)  
FM RDS  
S-METER  
BUFFER  
Q50  
AM OSC  
BUFFER  
Q4  
B+ SWITCH  
Q51  
BACKUP +5V  
FM B+  
FILTER  
(C5970)  
14  
7
5
1
2
3
28 24 25 15 14  
RDS DECODER  
5
4
FM/AM SIGNAL  
METER BUFFER  
Q1  
IC102  
SIGNAL  
QUALITY  
DECODER  
10  
9
OSCOUT  
OSCIN  
SC  
OUT  
18  
FM/AM PLL  
IC100  
57 kHz  
BAND-PASS  
FILTER  
RDS/RDBS  
DEMODULATOR  
& DECODER  
CIN  
CLOCKED  
COMPARATOR  
INTERFACE  
REGISTER  
16  
20  
19  
MPX  
LVIN  
X1  
10.25MHz  
MULTI  
PATH  
DETECTOR  
IIC BUS  
SLAVE  
TRANSCEIVER  
OSCILLATOR  
& CLOCK  
2
16  
13 12  
5
4
8
9
10  
BAND-PASS  
FILTER  
IC101  
X2  
4.332MHz  
Q5  
NOISE DET  
DISCHARGE  
SWITCH  
DATA, CLOCK  
(Page 23)  
G
69  
83 81  
53  
51  
35  
52  
67  
62  
82  
(C5970: E model)  
S701  
FREQUENCY SELECT  
MW 10K/FM 200K  
MASTER CONTROLLER  
IC700 (1/4)  
100  
BAND (9K-10K)  
MW 9K/FM 50K  
• SIGNAL PATH  
: FM  
: AM (MW/LW)  
05  
– 21 –  
– 22 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-3. BLOCK DIAGRAM – MAIN Section –  
• SIGNAL PATH  
: MD PLAY  
CNP300 (1/2)  
(L)  
(R)  
: FM  
BUS  
AUDIO IN  
INPUT SELECT,  
ELECTRICAL VOLUME  
IC300  
: AM (MW/LW)  
: BUS AUDIO IN  
R-CH  
CNP300 (2/2)  
DADT,  
BCK,  
LRCK,  
FS256  
VOLUME  
CONTROL  
CIRCUIT  
TONE  
CONTROL  
CIRCUIT  
LOUDNESS  
CONTROL  
CIRCUIT  
OUT FL  
OUT RL  
PDL  
SOFT  
MUTE  
22  
20  
(L)  
11  
12  
1
FADER  
FADER  
VOUTL  
VOUTR  
FRONT  
LINE OUT  
DATA  
BCK  
SE2L  
SE1L  
SE3L  
DADT  
BCK  
(Page 20)  
5
6
4
12  
9
A
B
MUTING  
Q301  
INPUT  
INTERFACE  
DIGITAL  
FILTER  
NOISE  
SHAPER  
D/A  
CONVERTER  
(C5970/C5970R)  
LRCK  
LRCK  
LOUDNESS  
CONTROL  
CIRCUIT  
28  
(R)  
R-CH  
R-CH  
AUDIO OUT  
(LINE OUT)  
MUTING  
Q401  
(C5960R)  
XTI  
FS256  
RESET  
CLK  
CONTROL  
MODE  
CONTROL  
1
(C5970/C5970R)  
RESET,  
EMPHASIS  
DIGITAL FILTER,  
D/A CONVERTER  
IC101  
DIGITAL CONTROL  
CIRCUIT  
IIC BUS  
25 24  
RSTB  
(L)  
(R)  
(Page 20)  
15  
REAR  
LINE OUT  
MUTING  
Q300  
17 16  
R-CH  
EMPHASIS  
26  
MUTING  
Q400  
R-CH  
FM  
AM  
(Page 22)  
(Page 22)  
E
F
CNP500 (1/2)  
(POWER CONNECTOR)  
POWER AMP  
IC500  
DATA, CLOCK  
DATA  
1
(Page 22)  
G
5
3
FRONT L (+)  
FL+  
FL–  
CLOCK  
12 FL-IN  
9
FRONT L (–)  
MUTING  
Q302  
4
FR+ 21  
FR– 23  
FRONT R (+)  
FRONT R (–)  
R-CH  
14 FR-IN  
11 RL-IN  
15 RR-IN  
12  
MUTING  
Q403  
2
9
7
RL+  
RL–  
REAR L (+)  
REAR L (–)  
10  
MUTING  
Q303  
3
MASTER CONTROLLER  
IC700 (2/4)  
17  
19  
REAR R (+)  
REAR R (–)  
RR+  
RR–  
R-CH  
11  
MUTING  
Q402  
70  
SDA  
SCL  
71  
15  
13  
TEST MODE  
TEL-ATT  
D701  
61  
22  
4
AF ATT  
AMP ATT 55  
LOCK  
AMP ON  
(Page 20)  
58 LOCK IN  
56  
(Page 27)  
AMP ON  
C
H
32  
TESTIN  
D511  
LEVEL SHIFT  
Q500  
TEL-ATT 80  
AU ATT 60  
D700  
Q702 (1/2)  
MUTING  
CONTROL SWITCH  
Q702 (2/2)  
(C5970/C5970R)  
D703  
BATTERY OFF  
MUTE DRIVER  
Q704  
COM +8V  
MD-ATT  
(Page 20)  
D
MUTING  
CONTROL SWITCH  
Q703  
BATT B+  
STB  
(Page 28)  
(Page 27)  
I
05  
MUTE  
J
– 23 –  
– 24 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-4. BLOCK DIAGRAM – DISPLAY/KEY CONTROL Section –  
EN801  
VOLUME/BASS/TREBLE/  
BALANCE/FADER CONTROL  
(LSW804: MDX-C5960R/C5970R only)  
LSW801 – 804,  
LSW806 – 821  
D900  
LSW805  
D-BASS  
ROTARY  
ENCODER  
EN801  
J900  
REMOTE IN  
CNP801  
FRONT PANEL SIDE  
D912  
1
1
BUZZER  
DRIVE  
Q701  
BZ1  
(BUZZER)  
KEY ACTIVE  
SWITCH  
Q905  
CN900  
MAIN BODY SIDE  
BACKUP +5V  
49 72  
46  
47  
106 107  
50  
79  
37  
12  
15  
MASTER CONTROLLER  
IC700 (3/4)  
93  
92  
73  
74  
13 14 104  
40  
X701  
32.768kHz  
X700  
3.68MHz  
D813 – 817,  
LSW802, 808, 811  
LSW801, 804, 806,  
LSW807, 809, 810,  
LSW812 – 821  
REGULATOR  
Q806  
LCD +10V  
(LSW804: MDX-C5960R/C5970R only)  
PL801, 802  
(LCD BACK LIGHT)  
REGULATOR  
Q805, 807  
CONTRAST  
SWITCHING  
Q901  
LCD +10V  
R845  
OSC  
LIQUID CRYSTAL DISPLAY DRIVER  
IC801  
21  
22 – 25  
3
11 – 6  
20  
18 17 19  
4
KEY IN1 – KEY IN4  
VLC0 – VLC5  
SEG1 – SEG39, SEG48 – SEG73  
COM0 – COM7  
100 – 93  
05  
32, 26 – 31, 33 – 38, 56 – 65,  
75 – 90, 39 – 55, 66 – 74  
LCD801  
LIQUID CRYSTAL DISPLAY  
– 25 –  
– 26 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-5. BLOCK DIAGRAM – BUS CONTROL/POWER SUPPLY Section –  
MASTER CONTROLLER  
IC700 (4/4)  
BACKUP +5V  
STB  
(Page 24)  
I
CNP500 (2/2)  
(POWER CONNECTOR)  
RAM RESET  
IC802  
102  
90  
RAMBU  
D804  
D803  
6
ANT REM  
RESET SIGNAL  
GENERATOR  
IC801  
+5V  
REGULATOR  
Q6  
BACKUP +5V  
RESET  
+5V  
AMP REM  
(TUNER CIRCUIT B+)  
86 HSTX  
5
D916  
6
8
AMP+B  
ANT+B  
BATT B+  
POWER AMP  
(IC500) B+  
S900  
RESET  
D702  
D3  
CNJ600  
REGULATOR  
IC800  
SONY BUS INTERFACE  
IC600  
BUS CONTROL IN  
FM B+  
(FM CIRCUIT B+)  
(FOR SONY BUS)  
VCC  
TUNER B+  
11 FM8V  
7
2
RST  
RST  
RESET  
SWITCH  
RESET  
2
13  
29  
SYSRST  
AM B+  
(AM CIRCUIT B+)  
10 AM8V  
5
DATA  
DATA IN  
6
DATA  
9
8
21 UNI SO  
20 UNI SI  
COM +8V  
(AUDIO CIRCUIT B+)  
9
5
COM8V  
BU+B  
DATA OUT  
D802  
4
6
CLK IN  
BUS  
CLK  
BACKUP +5V  
CLK  
4
1
22 UNI CKIO  
11  
12  
BUS ON SWITCH  
Q600  
BUS ON  
OUT  
ON IN  
BUS ON  
SWITCH  
BUS ON  
36  
BUS-ON  
4
3
2
PW-ON 109  
FM-ON  
110  
TU-ON 111  
7
BATT  
BU IN  
BATTERY  
SWITCH  
BATT  
76 BU-IN  
3
10  
D604  
D603  
TH600  
LCD +10V  
LCD DRIVER (IC801)/  
ILLUMINATION LED B+  
F1  
+10V  
REGULATOR  
Q903, 904  
16  
BATT  
D606  
BATTERY  
DETECT  
Q601  
BATT B+  
REGULATOR  
CONTROL SWITCH  
Q906  
LAMP ON (ILL ON) 108  
MUTE  
(Page 24)  
(Page 24)  
J
D913  
D500  
D607  
7
AMP ON  
ACCESSORY CHECK  
Q900  
ACC IN 64  
ACC  
H
14  
ILL IN  
57  
ILL IN  
LOAD +12V  
LOADING MOTOR  
DRIVER (IC305) B+  
MD MECHANISM CONTROLLER  
IC501 (2/2)  
+12V  
REGULATOR  
Q254  
B+ SWITCH  
Q402, 403  
60  
61  
MD-ON 65  
BU-IN  
BUS-ON  
REGULATOR  
CONTROL SWITCH  
Q255  
10  
MDMON  
30  
RESET  
DRIVER +5V  
MOTOR/COIL DRIVER  
(IC303) B+  
49 UNISI  
48 UNICKIO  
LEVEL SHIFT  
Q603  
50 UNISO  
+3.3V  
REGULATOR  
IC401, Q401  
DC/DC  
CONVERTER  
IC250  
B+ SWITCH  
Q250, 251  
+3.3V  
46 LINKOFF  
05  
– 27 –  
– 28 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-6. NOTES FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS  
Note on Printed Wiring Board:  
• X : parts extracted from the component side.  
• Y : parts extracted from the conductor side.  
r
Note on Schematic Diagram:  
• All capacitors are in µF unless otherwise noted. pF: µµF  
50 WV or less are not indicated except for electrolytics  
•
•
: Through hole.  
and tantalums.  
• All resistors are in Ω and / W or less unless otherwise  
specified.  
1
¢
4
: internal component.  
• b : Pattern from the side which enables seeing.  
(The other layers' patterns are not indicated.)  
¢
•
: internal component.  
• C : panel designation.  
Caution:  
Note:  
Note:  
Pattern face side: Parts on the pattern face side seen from  
(Conductor Side) the pattern face are indicated.  
Parts face side:  
Les composants identifiés par  
une marque ! sont critiques  
pour la sécurité.  
Ne les remplacer que par une  
piéce portant le numéro  
spécifié.  
The components identi-  
fied by mark ! or dotted  
line with mark !are criti-  
cal for safety.  
Replace only with part  
number specified.  
Parts on the parts face side seen from  
(Component Side) the parts face are indicated.  
•
U : B+ Line.  
• H : adjustment for repair.  
• Power voltage is dc 14.4V and fed with regulated dc power supply  
from ACC and BATT cords.  
• Voltages are taken with a VOM (Input impedance 10 MΩ).  
Voltage variations may be noted due to normal production toler-  
ances.  
• Waveforms are taken with a oscilloscope.  
Voltage variations may be noted due to normal production toler-  
ances.  
• Circled numbers refer to waveforms.  
• Signal path.  
F
f
L
E
: FM  
: AM (MW/LW)  
: BUS AUDIO IN  
: MD PLAY  
• Abbreviation  
CND : Canadian model.  
G
: German model.  
– 29 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-7. PRINTED WIRING BOARD – SERVO Board –  
• Semiconductor  
Location  
(Page 41)  
Ref. No. Location  
D401  
D501  
E-6  
E-4  
IC301  
IC302  
IC303  
IC304  
IC305  
IC306  
IC307  
IC401  
IC501  
IC502  
IC503  
B-5  
C-2  
B-3  
C-5  
F-6  
B-4  
B-8  
E-6  
F-3  
D-5  
D-4  
Q301  
Q302  
Q401  
Q402  
Q403  
A-4  
C-1  
D-6  
E-7  
E-7  
– 31 –  
– 32 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-8. SCHEMATIC DIAGRAM – SERVO Board (1/3) –  
• See page 55 for Waveforms. • See page 58 for IC Block Diagrams.  
• Voltages and waveforms are dc with respect  
to ground under no-signal conditions.  
no mark : MD PLAY  
The components identified by mark ! or dotted  
line with mark ! are critical for safety.  
Replace only with part number specified.  
Les composants identifiés par une marque !sont  
critiques pour la sécurité. Ne les remplacer que  
par une piéce portant le numéro spécifié.  
: Impossible to measure  
∗
(Page 35)  
– 33 –  
– 34 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-9. SCHEMATIC DIAGRAM – SERVO Board (2/3) – • See page 55 for Waveforms. • See page 57 for IC Block Diagrams.  
(Page 34)  
(Page 37)  
• Voltages and waveforms are dc with respect to ground  
under no-signal conditions.  
no mark : MD PLAY  
: Impossible to measure  
∗
– 35 –  
– 36 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
• Voltages and waveforms are dc with respect to ground  
under no-signal conditions.  
no mark : MD PLAY  
4-10. SCHEMATIC DIAGRAM – SERVO Board (3/3) – • See page 55 for Waveforms.  
: Impossible to measure  
∗
(Page 43)  
(Page 36)  
– 37 –  
– 38 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-11. PRINTED WIRING BOARD – MAIN Board (Component Side) –  
• Semiconductor Location  
(Component Side)  
Ref. No. Location  
Ref. No. Location  
D912  
D913  
D914  
D915  
D916  
J-10  
C-6  
K-11  
K-4  
D1  
D3  
D5  
D6  
C-11  
F-11  
H-11  
F-9  
K-4  
D7  
F-9  
D8  
G-13  
I-5  
F-4  
IC100  
IC101  
IC102  
IC250  
IC300  
IC600  
IC700  
IC801  
IC802  
E-11  
E-9  
I-12  
I-5  
F-8  
B-4  
I-8  
D200  
D202  
D301  
D500  
D501  
D503  
D504  
D505  
D506  
D507  
D508  
D509  
D510  
D511  
D520  
D521  
D522  
D600  
D601  
D602  
D603  
D604  
D606  
D607  
D700  
D701  
D702  
D703  
D800  
D801  
D802  
D803  
D804  
D900  
D901  
D902  
D903  
D904  
D905  
D907  
D908  
D909  
D910  
D911  
B-12  
B-5  
C-5  
C-6  
B-6  
B-6  
B-6  
B-8  
B-8  
B-9  
B-9  
B-5  
B-6  
A-9  
B-4  
B-2  
B-2  
B-3  
E-3  
J-2  
J-2  
Q1  
Q4  
Q5  
Q6  
Q50  
Q51  
C-11  
D-11  
F-9  
C-10  
H-13  
I-14  
H-11  
G-11  
H-11  
I-5  
H-6  
E-5  
F-4  
B-10  
B-11  
C-7  
Q101  
Q102  
Q103  
Q250  
Q251  
Q254  
Q255  
Q300  
Q301  
Q302  
Q303  
Q400  
Q401  
Q402  
Q403  
Q500  
Q600  
Q601  
Q603  
Q701  
Q702  
Q703  
Q704  
Q900  
Q901  
Q905  
Q906  
C-3  
E-3  
B-13  
H-5  
H-4  
J-6  
C-6  
B-10  
B-11  
C-8  
C-8  
B-5  
D-3  
D-4  
B-4  
F-4  
B-3  
B-3  
H-3  
D-3  
E-4  
C-1  
J-5  
F-3  
K-12  
K-12  
K-12  
K-12  
K-12  
K-11  
K-11  
K-11  
K-11  
G-5  
G-5  
G-4  
D-6  
J-6  
J-9  
J-5  
– 39 –  
– 40 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-12. PRINTED WIRING BOARD – MAIN Board (Conductor Side) –  
• Semiconductor  
Location  
(Conductor Side)  
Ref. No. Location  
D502  
C-3  
IC500  
IC800  
A-7  
E-1  
Q903  
Q904  
H-2  
H-3  
(Page 31)  
(Page 52)  
– 41 –  
– 42 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Voltages and waveforms are dc with respect to ground  
under no-signal (detuned) conditions.  
no mark : FM  
MDX-C5960R/C5970/C5970R  
(
[
) : AM (MW)  
] : LW  
4-13. SCHEMATIC DIAGRAM – MAIN Board (1/4) – • See page 55 for Waveforms. • See page 60 for IC Block Diagrams.  
⟨⟨  
⟩⟩ : MD PLAY  
(Page 38)  
(Page 45)  
(Page 49)  
(Page 48)  
– 43 –  
– 44 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-14. SCHEMATIC DIAGRAM – MAIN Board (2/4) –  
(Page  
44)  
(Page 49)  
• Voltages are dc with respect to ground under no-signal  
(detuned) conditions.  
no mark : FM  
– 45 –  
– 46 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-15. SCHEMATIC DIAGRAM – MAIN Board (3/4) – • See page 55 for Waveforms. • See page 60 for IC Block Diagrams.  
(Page 44)  
(Page 49)  
• Voltages and waveforms are dc with respect to ground  
under no-signal (detuned) conditions.  
no mark : FM  
(
[
) : AM (MW)  
] : LW  
– 47 –  
– 48 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-16. SCHEMATIC DIAGRAM – MAIN Board (4/4) – • See page 61 for IC Block Diagrams.  
(Page 45)  
(Page  
44)  
(Page 53)  
(Page 48)  
• Voltages are dc with respect to ground under no-signal  
(detuned) conditions.  
no mark : FM  
(
[
) : AM (MW)  
] : LW  
⟨⟨  
⟩⟩ : MD PLAY  
– 49 –  
– 50 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-17. PRINTED WIRING BOARD – KEY Board –  
• Semiconductor  
Location  
(Component Side)  
Ref. No. Location  
D811  
D812  
D813  
D814  
D815  
D816  
D817  
C-3  
B-3  
A-4  
A-2  
B-1  
C-2  
A-11  
IC801  
B-8  
Q806  
Q807  
C-4  
B-1  
(Page 41)  
• Semiconductor  
Location  
(Conductor Side)  
Ref. No. Location  
D802  
D803  
D804  
D806  
D807  
D808  
D819  
B-12  
B-12  
B-12  
B-5  
B-6  
A-12  
B-2  
Q805  
B-2  
– 51 –  
– 52 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
4-18. SCHEMATIC DIAGRAM – KEY Board – • See page 56 for Waveforms.  
(Page 50)  
• Voltages and waveforms are dc with respect to ground  
under no-signal (detuned) conditions.  
no mark : FM  
– 53 –  
– 54 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Waveforms  
– SERVO Board –  
– MAIN Board –  
– KEY Board –  
1 IC302 @§ (TE) (MD PLAY Mode)  
6 IC501 #¡ (EXTAL) (MD PLAY Mode)  
6 IC700 (£ (X1)  
1 IC100 9 (OSC IN) (FM/AM (MW) Mode)  
1 IC801 @º (OSC IN)  
Approx.  
0.5 Vp-p  
2.7 Vp-p  
5.8 Vp-p  
2.8 Vp-p  
2.7 Vp-p  
94 ns  
3.5 µs  
0.1 µs  
271 ns  
2 IC302 #¢ (FE) (MD PLAY Mode)  
7 IC304 3 (IN) (MD PLAY Mode)  
2 IC102 5 (OSC1) (FM Mode)  
Approx.  
0.3 Vp-p  
2.8 Vp-p  
3.5 Vp-p  
224 ns  
44 ns  
3 IC302 #• (RF) (MD PLAY Mode)  
3 IC250 2 SWE (MD PLAY Mode)  
14.2 Vp-p  
1.2 Vp-p  
24 µs  
4 IC301 @∞ (LRCK) (MD PLAY Mode)  
4 IC250 3 TC (MD PLAY Mode)  
1.1 Vp-p  
3.5 Vp-p  
12 µs  
23 µs  
5 IC301 @§ (XBCK) (MD PLAY Mode)  
5 IC700 &¢ (XOA)  
2.1 Vp-p  
4.5 Vp-p  
30 µs  
356 µs  
– 55 –  
– 56 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• IC Block Diagrams  
– SERVO Board –  
IC101 PCM1718E/2K  
CLK  
CONTROL  
XTI  
DGND  
VDD  
1
2
3
4
5
6
20 XTO  
19 CLKO  
18 MUTE  
17 DM1  
INPUT  
INTERFACE  
MODE  
CONTROL  
DIGITAL  
FILTER  
LRCIN  
DIN  
16 DM0  
NOISE SHAPER  
BCKIN  
15 RSTB  
14 FORMAT  
13 D/C_L  
12 VOUTL  
11 VCC  
5 LEVEL  
DAC  
5 LEVEL  
DAC  
ZERO 7  
D/C_R  
8
9
LOWPASS  
FILTER  
LOWPASS  
FILTER  
VOUTR  
CMOS  
AMP  
CMOS  
AMP  
AGND 10  
IC301 CXD2652AR  
100 99 98 97 96 95 94 93  
92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76  
75  
74  
73  
72  
AUX2  
TE  
PWM  
GENERATOR  
SPINDLE  
SERVO  
MNT0  
MNT1  
MNT2  
MNT3  
1
2
3
4
SE  
MONITOR  
CONTROL  
EACH  
BLOCK  
AVSS  
71  
70  
69  
68  
ADRB  
ADRT  
AVDD  
ADIO  
ADIP  
DECODER  
SWDT  
SCLK  
XLAT  
SRDT  
SENS  
5
6
7
8
9
EACH  
BLOCK  
CPU I/F  
67  
66  
65  
64  
63  
62  
VC  
SERVO  
DSP  
A/D  
CONVERTER  
AUX1  
FE  
ANALOG  
MUX  
ABCD  
BOTM  
PEAK  
XRST 10  
SQSY 11  
DQSY 12  
SUBCODE  
PROCESSOR  
61  
60  
59  
58  
CLTV  
FILO  
FILI  
RECP 13  
PCO  
SHOCK RESISTANT  
MEMORY CONTROLLER  
XINT 14  
TX 15  
57  
56  
PDO  
AVSS  
OSCI 16  
OSCO 17  
XTSL 18  
NC 19  
CLOCK  
GENERATOR  
EACH  
BLOCK  
55  
54  
53  
52  
51  
RFI  
COMP  
DIGITAL  
AUDIO  
I/F  
SAMPLING  
RATE  
CONVERTER  
BIAS  
AVDD  
ASYI  
ASYO  
DVSS 20  
DIN 21  
DOUT 22  
ADDT 23  
DADT 24  
LRCK 25  
ATRAC  
ENCODER/DECODER  
ADDRESS/DATA BUS A00 - A11, D0 - D3  
26 27 28  
29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49  
50  
– 57 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IC302 CXA2523R  
48  
47  
46  
45  
44  
43 42  
41  
40  
39  
38 37  
USROP  
–
+
RF AGC  
EQ  
EQ  
+
–
USRC  
RFA1  
DET  
BPF3T  
3T  
RFA2  
PEAK3T  
I
1
2
–
HLPT  
–1  
1
2
–
–
P-P  
–2  
–
J
3T  
WBL  
CFST  
PTGR  
TEMP  
PEAK  
–
–
–
1
2
–2  
–1  
CVB  
36  
BOTTOM  
WBL  
BOTM  
+
–
PBH  
VC  
A
3
4
GRV  
GRVA  
35  
34  
33  
ABCD  
FE  
+
+
+
+
+
–
AUX  
AA  
IVR  
IVR  
IVR  
BPFC  
ABCDA  
32 ADFG  
31 ADAGC  
30 ADIN  
+
–
B
C
5
6
BB  
CC  
+
+
–
–
FEA  
ATA  
+
–
DET  
BPF22  
WBL  
–
–
+
+
ADIP  
AGC  
29 ADFM  
28 SE  
+
–
D
E
7
8
DD  
EE  
IVR  
IVR  
WBL  
–1  
TG  
TG  
PTGR  
–
+
–
+
–2  
+
–
SEA  
TEA  
+
–
EE'  
27 CSLED  
26 TE  
–1  
–2  
EFB  
TESW  
+
–
F
9
+
–
FF  
IVR  
WBL  
FF'  
25 WBLADJ  
3T  
VI CONV  
FBAL  
EQ  
GSW IV  
PD 10  
AUXSW  
BGR  
COMMAND  
VREF  
SCRI - PARA  
DECODE  
APC 11  
APCREF 12  
13  
14  
15  
16 17 18  
19  
20  
21  
22 23  
24  
Download from Www.Som–anu5a8ls.c–om. All Manuals Search And Download.  
IC303 BH6511FS-E2  
32  
31  
30  
29  
28  
27  
26  
25  
24  
23  
22  
21  
20  
19  
18  
17  
AMP  
AMP  
AMP  
AMP  
VDD  
INTERFACE  
INTERFACE  
CHARGE  
PUMP.  
OSC  
PREDRIVE  
PREDRIVE  
PREDRIVE  
PREDRIVE  
AMP  
AMP  
8
AMP  
10  
AMP  
INTERFACE  
INTERFACE PSB  
1
2
3
4
5
6
7
9
11  
12  
13  
14  
15  
16  
IC305 BA6287F  
OUT1  
1
2
3
4
8
7
6
5
GND  
OUT2  
VREF  
RIN  
VM  
DRIVER  
DRIVER  
TSD  
VCC  
FIN  
CONTROL LOGIC  
POWER  
SAVE  
IC307 MN41V4400TT-08S  
GND  
D4  
1
2
3
4
5
6
7
8
9
D1  
D2  
26  
25  
CLOCK OSC  
XWE  
XRAS  
NC  
24 D3  
XCAS  
23  
22 XOE  
21 NC  
20 NC  
19 NC  
18 A8  
17 A7  
16 A6  
15 A5  
14 A4  
A0–A9  
COLUMN DECODER  
NC  
NC  
A9  
A0  
SENSE REFRESH AMP  
INPUT/OUTPUT CONTROL SWITCH  
A1 10  
A2 11  
A0–A9  
MEMORY CELL  
(4194204 BIT)  
12  
A3  
VDD 13  
– 59 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– MAIN Board –  
IC100 TDA7427AD  
28  
27 26 25 24 23  
22  
21  
20 19 18 17 16 15  
SUPPLY &  
POWER ON RESET  
11 BIT  
PROGRAMMABLE  
COUNTER  
SWITCH  
SWM/DIR  
PRE  
COUNTER  
FM/AM  
SWITCH  
5 BIT  
PROGRAMMABLE  
COUNTER  
SWITCH  
SWM/DIR  
CONTROL  
TIMER  
14 BIT  
PROGRAMMABLE  
COUNTER  
SWITCH  
OUT  
11 – 21 BIT  
PROGRAMMABLE  
COUNTER  
16 BIT  
PROGRAMMABLE  
COUNTER  
FM/AM  
SWITCH  
INLOCK  
DETECTOR  
TEST  
LOGIC  
PHASE  
COM-  
PARATOR  
CHARGE  
PUMP  
IIC BUS  
INTERFACE  
REFERENCE  
OSCILLATOR  
SWITCH  
LP1/LP2  
PORT  
EXTENSION  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
IC102 SAA6588T-118 (MDX-C5960R/C5970R)  
IC250 NJM2360AM (TE2)  
8
7
6
5
CD  
CS 1  
ES 2  
Q2  
Q
S
R
20  
19  
18  
17  
16  
15  
14  
13  
12 11  
Q1  
SI  
POWER SUPPLY  
& RESET  
PAUSE  
DETECTOR  
Ipk  
CT OSC  
MULTI  
PATH  
DETECTOR  
V+  
CT 3  
57kHz  
8th ORDER  
+
–
VREF  
1.25V  
BAND-PASS FILTER  
INVIN  
GND 4  
COMP  
CLOCKED  
COMPARATOR  
SIGNAL QUALITY  
DECODER  
4
5
4
CLOCK  
CLOCK  
DATA  
RDS/RDBS  
DEMODULATOR  
RDS/RDBS  
DECODER  
INTERFACE  
REGISTER  
DATA  
TEST  
CONTROL  
OSCILLATOR  
& CLOCK  
IIC BUS SLAVE  
TRANSCEIVER  
1
2
3
4
5
6
7
8
9
10  
Download from Www.Som–anu6a0ls.c–om. All Manuals Search And Download.  
IC300 TDA7462D013TR  
SE3L  
SE3R  
MUTE  
SDA  
28  
27  
26  
25  
24 SCL  
PAUSE  
DETECT  
PAUSE  
23  
FRONT  
FADER  
INPUT  
TREBLE/  
BASS  
CONTROL  
CIRCUIT  
OUT FL  
OUT FR  
22  
VOICE BANDPASS  
LOUDNESS  
CONTROL  
CIRCUIT  
VOLUME  
CONTROL  
CIRCUIT  
SOFT  
MUTE  
GAIN &  
AUTO  
ZERO  
SE1L  
SE1R  
MD+  
1
2
3
4
5
6
7
8
9
HP  
LP  
FRONT  
FADER  
MD–  
21  
20  
CDL+  
CDL–  
CDR–  
CDR+  
PDR  
COMPANDER  
REAR  
FADER  
OUT RL  
PDGND 10  
PDL 11  
LOUDNESS  
CONTROL  
CIRCUIT  
SE2L 12  
SE2R 13  
INPUT  
GAIN  
REAR  
FADER  
19 OUT RR  
SUBWOOFER  
LP  
FADER  
BEEP  
18 SUBOUT+  
SUBWOOFER  
OUT  
SUBOUT–  
17  
SDA  
SCL  
IIC  
BUS  
DIGITAL CONTROL CIRCUIT  
VDD  
16  
POWER  
SUPPLY  
CREF 14  
15 GND  
IC600 BA8270F-E2  
IC800 BA3918-V3  
BUS ON  
SWITCH  
14 VCC  
BUS ON  
1
2
3
REGULATOR  
RESET  
SWITCH  
13  
RST  
RST  
12 BUS ON  
11 CLK IN  
10 BU IN  
BATTERY  
SWITCH  
BATT  
OVER VOLTAGE  
PROTECT  
4
5
6
CLK  
VREF  
DATA  
–
+
–
+
–
+
–
+
9
8
DATA IN  
GND  
7
DATA OUT  
2
3
4
5
6
7
8
9
10  
11  
12  
1
– 61 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-19. IC PIN FUNCTION DESCRIPTION  
• SERVO BOARD IC301 CXD2652AR  
(DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR, EFM/ACIRC ENCODER/DECODER,  
SHOCK PROOF MEMORY CONTROLLER, ATRAC ENCODER/DECODER, 2M BIT D-RAM)  
Pin No.  
Pin Name  
I/O  
Function  
Focus OK signal output to the MD mechanism controller (IC501)  
“H” is output when focus is on (“L”: NG)  
1
MNT0  
O
2
3
MNT1  
MNT2  
MNT3  
SWDT  
SCLK  
XLAT  
SRDT  
SENS  
XRST  
O
Track jump detection signal output to the MD mechanism controller (IC501)  
Busy monitor signal output to the MD mechanism controller (IC501)  
O
4
O
Spindle servo lock status monitor signal output to the MD mechanism controller (IC501)  
Writing serial data signal input from the MD mechanism controller (IC501)  
Serial data transfer clock signal input from the MD mechanism controller (IC501)  
Serial data latch pulse signal input from the MD mechanism controller (IC501)  
Reading serial data signal output to the MD mechanism controller (IC501)  
Internal status (SENSE) output to the MD mechanism controller (IC501)  
Reset signal input from the MD mechanism controller (IC501) “L”: reset  
5
I
6
I
7
I
8
O (3)  
O (3)  
I
9
10  
Subcode Q sync (SCOR) output to the MD mechanism controller (IC501)  
“L” is output every 13.3 msec Almost all, “H” is output  
11  
12  
SQSY  
DQSY  
O
O
Digital In U-bit CD format subcode Q sync (SCOR) output terminal  
“L” is output every 13.3 msec Almost all, “H” is output Not used (open)  
Laser power selection signal input terminal  
“L”: playback mode, “H”: recording mode (fixed at “L” in this set)  
13  
14  
RECP  
XINT  
I
O
Interrupt status output to the MD mechanism controller (IC501)  
Recording data output enable signal input terminal  
Writing data transmission timing input (Also serves as the magnetic head on/off output)  
Not used (fixed at “L”)  
15  
TX  
I
16  
17  
OSCI  
I
System clock signal (512Fs=22.5792 MHz) input from the oscillator circuit  
System clock signal (512Fs=22.5792 MHz) output terminal Not used (open)  
OSCO  
O
Input terminal for the system clock frequency setting  
“L”: 45.1584 MHz, “H”: 22.5792 MHz (fixed at “H” in this set)  
18  
XTSL  
I
19  
20  
RVDD  
RVSS  
DIN  
—
—
I
Power supply terminal (+3.3V) (digital system)  
Ground terminal (digital system)  
21  
Digital audio signal input terminal when recording mode Not used (fixed at “L”)  
Digital audio signal output terminal when playback mode Not used (open)  
Recording data input terminal Not used (fixed at “L”)  
Playback data output to the PCM1718E (IC101)  
22  
DOUT  
ADDT  
DADT  
LRCK  
XBCK  
FS256  
DVDD  
A03 to A00  
A10  
O
I
23  
24  
O
O
O
O
—
O
O
O
O
—
O
O
O
O
O
25  
L/R sampling clock signal (44.1 kHz) output to the PCM1718E (IC101)  
Bit clock signal (2.8224 MHz) output to the PCM1718E (IC101)  
Clock signal (11.2896 MHz) output to the PCM1718E (IC101)  
Power supply terminal (+3.3V) (digital system)  
26  
27  
28  
29 to 32  
33  
Address signal output to the D-RAM (IC307)  
Address signal output to the external D-RAM Not used (open)  
Address signal output to the D-RAM (IC307)  
34 to 38  
39  
A04 to A08  
A11  
Address signal output to the external D-RAM Not used (open)  
Ground terminal (digital system)  
40  
DVSS  
XOE  
41  
Output enable signal output to the D-RAM (IC307) “L” active  
Column address strobe signal output to the D-RAM (IC307) “L” active  
Address signal output to the D-RAM (IC307)  
42  
XCAS  
A09  
43  
44  
XRAS  
XWE  
Row address strobe signal output to the D-RAM (IC307) “L” active  
Write enable signal output to the D-RAM (IC307) “L” active  
45  
Download from Www.Som–anu6a2ls.c–om. All Manuals Search And Download.  
Pin No.  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
Pin Name  
D1  
I/O  
I/O  
I/O  
I/O  
I/O  
I
Function  
D0  
Two-way data bus with the D-RAM (IC307)  
D2  
D3  
MVCI  
ASYO  
ASYI  
AVDD  
BIAS  
RFI  
Digital in PLL oscillation input from the external VCO Not used (fixed at “L”)  
Playback EFM full-swing output terminal  
O
I (A) Playback EFM asymmetry comparator voltage input terminal  
Power supply terminal (+3.3V) (analog system)  
—
I (A) Playback EFM asymmetry circuit constant current input terminal  
I (A) Playback EFM RF signal input from the CXA2523R (IC302)  
AVSS  
PDO  
—
Ground terminal (analog system)  
O (3) Phase comparison output for clock playback analog PLL of the playback EFM Not used (open)  
O (3) Phase comparison output for master clock of the recording/playback EFM master PLL  
I (A) Filter input for master clock of the recording/playback master PLL  
PCO  
FILI  
FILO  
CLTV  
PEAK  
BOTM  
ABCD  
FE  
O (A) Filter output for master clock of the recording/playback master PLL  
I (A) Internal VCO control voltage input of the recording/playback master PLL  
I (A) Light amount signal (RF/ABCD) peak hold input from the CXA2523R (IC302)  
I (A) Light amount signal (RF/ABCD) bottom hold input from the CXA2523R (IC302)  
I (A) Light amount signal (ABCD) input from the CXA2523R (IC302)  
I (A) Focus error signal input from the CXA2523R (IC302)  
AUX1  
VC  
I (A) Auxiliary signal (I3 signal/temperature signal) input terminal Not used (fixed at “H”)  
I (A) Middle point voltage (+1.65V) input from the CXA2523R (IC302)  
ADIO  
AVDD  
ADRT  
ADRB  
AVSS  
SE  
O (A) Monitor output of the A/D converter input signal Not used (open)  
—
Power supply terminal (+3.3V) (analog system)  
I (A) A/D converter operational range upper limit voltage input terminal (fixed at “H” in this set)  
I (A) A/D converter operational range lower limit voltage input terminal (fixed at “L” in this set)  
—
Ground terminal (analog system)  
I (A) Sled error signal input from the CXA2523R (IC302)  
TE  
I (A) Tracking error signal input from the CXA2523R (IC302)  
AUX2  
DCHG  
APC  
I (A) Auxiliary signal input terminal Light amount signal input from the CXA2523R (IC302)  
I (A) Connected to the +3.3V power supply  
I (A) Error signal input for the laser automatic power control Not used (fixed at “L”)  
ADFG  
F0CNT  
XLRF  
CKRF  
DTRF  
I
ADIP duplex FM signal (22.05 kHz ± 1 kHz) input from the CXA2523R (IC302)  
Filter f0 control signal output terminal Not used (open)  
O
O
O
O
Serial data latch pulse signal output terminal Not used (open)  
Serial data transfer clock signal output terminal Not used (open)  
Writing serial data output terminal Not used (open)  
Control signal output to the reference voltage generator circuit for the laser automatic power  
control  
83  
APCREF  
O
84  
85  
86  
87  
88  
89  
90  
91  
LDDR  
TRDR  
TFDR  
DVDD  
FFDR  
FRDR  
FS4  
O
O
O
—
O
O
O
O
PWM signal output for the laser automatic power control Not used (open)  
Tracking servo drive PWM signal (–) output to the BH6511FS (IC303)  
Tracking servo drive PWM signal (+) output to the BH6511FS (IC303)  
Power supply terminal (+3.3V) (digital system)  
Focus servo drive PWM signal (+) output to the BH6511FS (IC303)  
Focus servo drive PWM signal (–) output to the BH6511FS (IC303)  
Clock signal (176.4 kHz) output terminal (X’tal system) Not used (open)  
Sled servo drive PWM signal (–) output to the BH6511FS (IC303)  
SRDR  
– 63 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pin No.  
92  
Pin Name  
SFDR  
I/O  
O
O
O
I
Function  
Sled servo drive PWM signal (+) output to the BH6511FS (IC303)  
Spindle servo drive PWM signal (–) output to the BH6511FS (IC303)  
Spindle servo drive PWM signal (+) output to the BH6511FS (IC303)  
Not used (fixed at “L”)  
93  
SPRD  
94  
SPFD  
95  
FGIN  
96  
TEST1  
TEST2  
TEST3  
DVSS  
EFMO  
I
97  
I
Input terminal for the test (fixed at “L”)  
98  
I
99  
—
O
Ground terminal (digital system)  
100  
EFM signal output terminal when recording mode Not used (open)  
* I (A) for analog input, O (3) for 3-state output, and O (A) for analog output in the column I/O.  
Download from Www.Som–anu6a4ls.c–om. All Manuals Search And Download.  
• SERVO BOARD IC302 CXA2523R (RF AMP, FOCUS/TRACKING ERROR AMP)  
Pin No.  
1
Pin Name  
I
I/O  
I
Function  
I-V converted RF signal I input from the optical pick-up block detector  
I-V converted RF signal J input from the optical pick-up block detector  
Middle point voltage (+1.65V) generation output terminal  
Signal input from the optical pick-up detector  
2
J
I
3
VC  
O
I
4 to 9  
10  
A to F  
PD  
I
Light amount monitor input from the optical pick-up block laser diode  
Laser amplifier output terminal to the automatic power control circuit  
Reference voltage input terminal for setting laser power  
11  
APC  
O
I
12  
APCREF  
GND  
13  
—
I
Ground terminal  
14  
TEMPI  
TEMPR  
SWDT  
SCLK  
XLAT  
XSTBY  
Connected to the temperature sensor Not used (open)  
O
I
15  
Output terminal for a temperature sensor reference voltage Not used (open)  
Writing serial data input from the MD mechanism controller (IC501)  
Serial data transfer clock signal input from the MD mechanism controller (IC501)  
Serial data latch pulse signal input from the MD mechanism controller (IC501)  
Standby signal input terminal “L”: standby (fixed at “H” in this set)  
16  
17  
I
18  
I
19  
I
Center frequency control voltage input terminal of internal circuit (BPF22, BPF3T, EQ) input  
terminal  
20  
F0CNT  
I
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
VREF  
EQADJ  
3TADJ  
VCC  
O
I
Reference voltage output terminal Not used (open)  
Center frequency setting terminal for the internal circuit (EQ)  
Center frequency setting terminal for the internal circuit (BPF3T)  
Power supply terminal (+3.3V)  
I
—
I
WBLADJ  
TE  
Center frequency setting terminal for the internal circuit (BPF22)  
Tracking error signal output to the CXD2652AR (IC301)  
Connected to the external capacitor for low-pass filter of the sled error signal  
Sled error signal output to the CXD2652AR (IC301)  
FM signal output of the ADIP  
O
I
CSLED  
SE  
O
O
I
ADFM  
ADIN  
ADAGC  
ADFG  
AUX  
Receives a ADIP FM signal in AC coupling  
I
Connected to the external capacitor for ADIP AGC  
O
O
O
O
O
O
O
I
ADIP duplex signal (22.05 kHz ± 1 kHz) output to the CXD2652AR (IC301)  
Auxiliary signal (I3 signal/temperature signal) output terminal Not used (open)  
Focus error signal output to the CXD2652AR (IC301)  
Light amount signal (ABCD) output to the CXD2652AR (IC301)  
Light amount signal (RF/ABCD) bottom hold output to the CXD2652AR (IC301)  
Light amount signal (RF/ABCD) peak hold output to the CXD2652AR (IC301)  
Playback EFM RF signal output to the CXD2652AR (IC301)  
Connected to the external capacitor for RF auto gain control circuit  
Receives a RF signal in AC coupling  
FE  
ABCD  
BOTM  
PEAK  
RF  
RFAGC  
AGCI  
COMPO  
COMPP  
ADDC  
OPO  
I
O
I
User comparator output terminal Not used (open)  
User comparator input terminal Not used (fixed at “L”)  
Connected to the external capacitor for cutting the low band of the ADIP amplifier  
User operational amplifier output terminal Not used (open)  
User operational amplifier inversion input terminal Not used (fixed at “L”)  
RF signal output terminal  
I
O
I
OPN  
RFO  
O
I
MORFI  
MORFO  
Receives a MO RF signal in AC coupling  
O
MO RF signal output terminal  
– 65 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• SERVO BOARD IC501 CXP84340-201Q (MD MECHANISM CONTROLLER)  
Pin No.  
Pin Name  
TIN3 to TIN7  
LOAD  
I/O  
I/O  
O
Function  
1 to 5  
6
Input of the 4×8 matrix test keys (“L” is always output, except in test mode) Not used (open)  
Loading motor control signal output to the motor driver (IC305) “H” active *1  
Loading motor control signal output to the motor driver (IC305) “H” active *1  
Not used (open)  
7
EJECT  
O
8, 9  
NCO  
O
Power supply on/off control signal output of the MD mechanism deck section main power supply  
and loading motor drive (IC305) power supply “H”: power on  
10  
MDMON  
O
Inputs the disc loading completion detect switch detection signal  
“L”: When completed of the disc loading operation  
11  
12  
E-SW  
AG-OK  
ADJ-OK  
NCO  
I
O
O
O
I
Output of aging status in test mode “L”: under aging, “H”: aging completed Not used (open)  
Output of status when aging completed in test mode “L”: aging NG, “H”: aging OK  
Not used (open)  
13  
14 to 17  
18  
Not used (open)  
Select whether defect function is used for the CXD2652AR (IC301)  
“L”: used this function , “H”: not used this function (fixed at “H” in this set)  
DFCTSEL  
Select whether digital PLL function is used for the CXD2652AR (IC301)  
“L”: used this function , “H”: not used this function (fixed at “H” in this set)  
19  
20  
DPLLSEL  
EMPHSEL  
I
I
Select whether emphasis signal output from pin or unilink data  
“L”: outputs from both pin and unilink data, “H”: output from pin only (fixed at “H” in this set)  
21  
22  
LOCK  
NCO  
O
O
Mini-disc lock detection signal output to the master controller (IC700) “H”: lock  
Not used (open)  
Select whether D-RAM capacitance 2M bit or 4M bit “L”: 4M bit (external D-RAM) , “H”: 2M  
bit (internal D-RAM of CXD2652AR) (fixed at “L” in this set)  
23  
24, 25  
26  
2M/4M  
NCO  
I
O
I
Not used (open)  
Focus OK signal input from the CXD2652AR (IC301)  
“H” is input when focus is on (“L”: NG)  
MNT0  
27  
28  
29  
MNT1  
MNT2  
MNT3  
I
I
I
Track jump detection signal input from the CXD2652AR (IC301)  
Busy monitor signal input from the CXD2652AR (IC301)  
Spindle servo lock status monitor signal input from the CXD2652AR (IC301)  
System reset signal input from the master controller (IC700), reset signal generator (IC801) and  
reset switch (S900) “L”: reset For several hundreds msec. after the power supply rises, “L” is  
input, then it changes to “H”  
30  
RESET  
I
31  
32  
33  
34  
35  
36  
37  
38  
39  
EXTAL  
XTAL  
VSS  
O
I
Main system clock output terminal (10 MHz)  
Main system clock input terminal (10 MHz)  
—
O
I
Ground terminal  
TX  
Sub system clock output terminal (32.768 kHz) Not used (open)  
Sub system clock input terminal (32.768 kHz) Not used (fixed at “L”)  
Ground terminal (for A/D converter)  
TEX  
AVSS  
AVREF  
INIT  
—
I
Reference voltage input terminal (+5V) (for A/D converter)  
Initial reset signal input terminal (A/D input) (fixed at “H”)  
Temperature sensor (TH501) input terminal (A/D input)  
I
TEMP  
I
Select the number of load/eject aging times (A/D input)  
0H – 54H (30 times), 55H – OA9H (20 times), OAAH – OFFH (10 times)  
40  
ACNT  
I
41  
42  
43  
44  
45  
46  
DO-SEL  
EE-CS  
I
O
Select the digital output bits (A/D input)  
Chip select signal output to the external EEPROM device Not used (open)  
Serial data transfer clock signal output to the external EEPROM device Not used (open)  
Two way data bus with the external EEPROM device Not used (open)  
Writing serial data signal output to the CXD2652AR (IC301) and CXA2523R (IC302)  
Unilink on/off control signal output for the SONY bus “L”: link on, “H”: link off  
EE-CKO  
EE-SIO  
O
I/O  
O
MD-SO  
LINKOFF  
O
Download from Www.Som–anu6a6ls.c–om. All Manuals Search And Download.  
Pin No.  
Pin Name  
I/O  
Function  
47  
UNIREQ  
O
Data request signal output terminal (for SONY bus) “H”: request on Not used (open)  
Serial clock signal input from the master controller (IC700) or serial clock signal output to the  
SONY bus interface (IC600) and master controller (IC700) (for SONY bus)  
48  
UNICKIO  
I/O  
49  
50  
51  
52  
53  
54  
55  
UNISI  
UNISO  
MD-CKO  
MD-SI  
I
O
O
I
Serial data input from the SONY bus interface (IC600)  
Serial data output to the SONY bus interface (IC600)  
Serial data transfer clock signal output to the CXD2652AR (IC301) and CXA2523R (IC302)  
Reading serial data signal input from the CXD2652AR (IC301)  
Not used (open)  
NCO  
O
I
SENS  
Internal status (SENSE) input from the CXD2652AR (IC301)  
Interrupt status input from the CXD2652AR (IC301)  
CC-XINT  
I
Detection input from the sled limit-in detect switch  
The optical pick-up is inner position when “L”  
56  
LIMIT-IN  
I
57  
58  
EJT-KEY  
I
Eject request signal input terminal “L”: eject on Not used (fixed at “H”)  
ERROR-PWM  
O
PWM error monitor output terminal (C1and ATER is output when test mode) Not used (open)  
Reset signal output to the PCM1718E (IC101), CXD2652AR (IC301) and BH6511FS (IC303)  
“L”: reset  
59  
MD-RST  
O
Battery detect signal input from the SONY bus interface (IC600) and battery check circuit  
“H”: battery on  
60  
61  
62  
BU-IN  
BUS-ON  
SQSY  
I
I
I
SONY bus on/off control signal input from the master controller (IC700) “L”: bus on  
Subcode Q sync (SCOR) input from the CXD2652AR (IC301)  
“L” is input every 13.3 msec Almost all, “H” is input  
Inputs the disc loading start or disc eject completion detect switch detection signal  
“L”: When start or eject completed of the disc loading operation  
63  
64  
65  
C-SW  
MD-LAT  
MD-ON  
I
O
O
Serial data latch pulse signal output to the CXD2652AR (IC301) and CXA2523R (IC302)  
Power supply on/off control signal output of the MD mechanism deck section main power supply  
“H”: power on  
66  
67  
DEEMP  
A-MUTE  
NCO  
O
O
O
O
O
I
Emphasis on/off control signal output to the PCM1718E (IC101) “H”: emphasis on  
Audio muting on/off control signal output terminal  
Not used (open)  
68  
69  
TSTCKO  
TSTSO  
Output of clock signal for the test mode display Not used (open)  
Output of data for the test mode display Not used (open)  
Setting terminal for the test mode “L”: test mode, “H”: normal mode  
Power supply terminal (+5V)  
70  
71  
TSTMOD  
VCC  
72  
—
I
73  
NIL  
Not used (fixed at “H”)  
TOUT0 to TOUT3  
TIN0 to TIN2  
74 to 77  
78 to 80  
O
I/O  
Output of the 4×8 matrix test keys Not used (open)  
Input of the 4×8 matrix test keys (“L” is always output, except in test mode) Not used (open)  
*1 Loading motor (M903) control  
Operation  
IN  
OUT  
BRAKE  
STOP  
Terminal  
“H”  
“L”  
“L”  
“H”  
“H”  
“H”  
“L”  
“L”  
LOAD (pin 6)  
EJECT (pin 7)  
– 67 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAIN BOARD IC700 (MASTER CONTROLLER)  
MB90574PFV-G-188-BND (MDX-C5960R/C5970R) MB90574PFV-G-187-BND (MDX-C5970)  
•
Pin No.  
Pin Name  
NC  
I/O  
O
Function  
1 to 7  
8
Not used (open)  
VCC  
—
I
Power supply terminal (+5V)  
9
PLL SI  
PLL SO  
PLL CKO  
PLL serial data input terminal Not used (open)  
10  
11  
O
PLL serial data output terminal Not used (open)  
O
PLL serial data transfer clock signal output terminal Not used (open)  
Front panel block remove/attach detection signal input terminal  
“L”: front panel is attached  
12  
NOSE-SW  
I
13  
14  
15  
16  
LCD SO  
LCD CKO  
BEEP  
O
O
O
O
Serial data output to the liquid crystal display driver (IC801)  
Serial data transfer clock signal output to the liquid crystal display driver (IC801)  
Beep sound drive signal output terminal  
DBMOD2  
D-BASS mode control signal output terminal Not used (open)  
Front panel open/close detection signal input “L” is input when the front panel is closed  
Not used (open)  
17  
DOOR-SW  
I
18, 19  
20  
NC  
O
I
Not used (open)  
UNI SI  
UNI SO  
Serial data input from the SONY bus interface (IC600)  
Serial data output to the SONY bus interface (IC600)  
21  
O
Serial clock signal output to the MD mechanism controller (IC501) and SONY bus interface  
(IC600) or serial clock signal input from the MD mechanism controller (IC501) (for SONY bus)  
22  
UNI CKIO  
I/O  
23  
24  
NC  
O
I
Not used (open)  
SIRCS  
Sircs remote control signal input terminal Not used (fixed at “L”)  
LED drive signal output of the MD disc slot illumination and 6 indicator “H”: LED on  
“H” is output to turn on LED when front panel is opened Not used (open)  
25  
PACK-IND  
O
26  
27  
VOL SO  
O
O
Serial data output for the electrical volume Not used (open)  
VOL CKO  
Serial data transfer clock signal output for the electrical volume Not used (open)  
Destination setting terminal  
(Except German models: fixed at “H”, German model: fixed at “L”)  
28  
29  
30  
DSTSEL0  
SYSRST  
DSTSEL1  
I
O
I
System reset signal output to the MD mechanism controller (IC501) and SONY bus interface  
(IC600) “L”: reset  
Destination setting terminal  
(US, Canadian models: fixed at “H”, E model: fixed at “L”)  
31  
32  
33  
34  
DBMOD1  
TESTIN  
VSS  
O
I
D-BASS mode control signal output terminal Not used (open)  
Setting terminal for the test mode “L”: test mode, Normally: fixed at “H”  
Ground terminal  
—
—
C
Connected to coupling capacitor for the power supply  
Discharge control signal output for the noise detection circuit “H”: discharge  
Used for the MDX-C5960R/C5970R only (MDX-C5970: Not used (open))  
35  
36  
NS-MASK  
BUS- ON  
O
O
Bus on/off control signal output to the MD mechanism controller (IC501) and SONY bus  
interface (IC600) “L”: bus on  
A/D converter power control signal output terminal  
37  
AD-ON  
O
When the KEYACK (pin &ª) that controls reference voltage power for key A/D conversion input  
is active, “L” is output from this terminal to enable the input  
38  
39  
DVCC  
DVSS  
—
—
Power supply terminal (+5V) (for D/A converter)  
Ground terminal (for D/A converter)  
View field angle control signal is output when front panel is fully opened  
“H”: front panel is fully opened  
40  
LCDANG  
O
41  
42  
VOL CE  
AVCC  
O
Chip enable signal output for the electrical volume Not used (open)  
Power supply terminal (+5V) (for A/D converter)  
—
Download from Www.Som–anu6a8ls.c–om. All Manuals Search And Download.  
Pin No.  
43  
Pin Name  
AVRH  
I/O  
I
Function  
Reference voltage (+5V) input terminal (for A/D converter)  
Reference voltage (0V) input terminal (for A/D converter)  
Ground terminal (for A/D converter)  
44  
AVRL  
I
45  
AVSS  
—
Key input terminal (A/D input) (LSW801 to LSW804, LSW806 to LSW810)  
OFF, SOURCE, SEEK/AMS + ) + = 0 – , DSPL, SOUND, MODE, SHIFT, 1, 2  
keys input (LSW804 DSPL: MDX-C5960R/C5970R only)  
46  
47  
KEY-IN0  
KEY-IN1  
I
I
Key input terminal (A/D input) (LSW811 to LSW821)  
6, AF/TA (MDX-C5960R/C5970R) DSPL (MDX-C5970), LIST PTY (MDX-C5960R/  
C5970R) LIST (MDX-C5970), 10 to 3 keys input  
48  
49  
50  
KEY-IN2  
RC-IN0  
I
I
I
Key input terminal (A/D input) Not used (open)  
Rotary remote commander key input terminal (A/D input)  
D-BASS switch (LSW805) input terminal (A/D input)  
D-BASS IN  
Noise level detection signal input at SEEK mode (A/D input)  
Used for the MDX-C5960R/C5970R only (MDX-C5970: Not used (open))  
51  
52  
QUALITY  
I
I
Multi-path detection signal input from the RDS decoder (IC102) (A/D input)  
Used for the MDX-C5960R/C5970R only (MDX-C5970: Not used (open))  
MPDH (MTP)  
S-METER  
(VSM)  
FM and AM signal meter voltage detection input from the FM/AM tuner unit (TU1)  
(A/D input)  
53  
54  
55  
I
VCC  
—
O
Power supply terminal (+5V)  
Power amp muting on/off control signal output to the power amplifier (IC500)  
“L”: muting on  
AMP ATT  
Standby on/off control signal output to the power amplifier (IC500)  
“L”: standby mode, “H”: amp on  
56  
57  
AMP ON  
ILL IN  
O
I
Auto dimmer control illumination line detection signal input terminal  
“L” is input at dimmer detection  
58  
59  
60  
61  
LOCK IN  
EMPH ON  
AU ATT  
AF ATT  
I
Mini-disc lock detection signal input from the MD mechanism controller (IC501) “H”: lock  
Emphasis control signal output terminal Not used (open)  
O
O
O
Audio line muting on/off control signal output terminal “H”: muting on  
Preamp muting on/off control signal output to the electrical volume (IC300) “H”: muting on  
Muting on/off control signal output of the FM tuner signal “H”: muting on  
Used for the MDX-C5960R/C5970R only (MDX-C5970: Not used (open))  
62  
TU-ATT  
O
63  
64  
VSS  
—
I
Ground terminal  
ACC IN  
Accessory detect signal input terminal “L”: accessory on  
PLL low-pass filter time constant selection signal output at AF SEEK  
“H” is output when AF SEEK Not used (open)  
65  
66  
67  
AF-SEEK  
WIDE  
O
O
I
IF band select signal output terminal “H”: wide mode  
In receiving FM signals, interference noise from adjacent stations is removed by narrowing the  
IF band automatically in the tuner unit so as to raise the selectivity, but in this case, the distortion  
may increase and accordingly, the IF band is widened forcibly Not used (open)  
Data transmit completed detect signal input from the RDS decoder (IC102) “H” active  
Used for the MDX-C5960R/C5970R only (MDX-C5970: Not used (open))  
DAVN  
68  
69  
NARROW  
SSTOP  
O
I
Narrow select signal output terminal “H” active Not used (open)  
IF counter request signal input from the FM/AM PLL (IC100)  
Two-way data bus with the FM/AM PLL (IC100), RDS decoder (IC102) and electrical volume  
(IC300) (RDS decoder is MDX-C5960R/C5970R only)  
70  
71  
SDA  
SCL  
I/O  
O
Bus clock signal output to the FM/AM PLL (IC100), RDS decoder (IC102) and electrical volume  
(IC300) (RDS decoder is MDX-C5960R/C5970R only)  
72  
73  
74  
RC-IN1  
X1A  
I
O
I
Rotary remote commander shift key input terminal “L”: shift  
Sub system clock output terminal (32.768 kHz)  
Sub system clock input terminal (32.768 kHz)  
X0A  
– 69 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pin No.  
Pin Name  
I/O  
Function  
75  
NC  
O
Not used (open)  
Battery detect signal input from the SONY bus interface (IC600) and battery detect circuit  
“L” is input at low voltage  
76  
77, 78  
79  
BU-IN  
NC  
I
O
I
Not used (open)  
Input of acknowledge signal for the key entry Acknowledge signal is input to accept function  
and eject keys in the power off status On at input of “H”  
KEYACK  
Telephone muting signal input terminal At input of “H”, the signal is attenuated by –20 dB  
Used for the MDX-C5970/C5970R only (MDX-C5960R: fixed at “H”)  
80  
81  
TEL-ATT  
I
FM stereo broadcasting detection signal input from the FM/AM tuner unit (TU1), or forced  
monaural control signal output to the FM/AM tuner unit (TU1)  
ST-MONO  
I/O  
“L” is input in the FM stereo mode, or “L” is output in the forced monaural mode  
Seek control signal output to the FM/AM tuner unit (TU1)  
AM mode: Used for IF count output/SD output request/AGC cut at SEEK or BTM  
FM mode: Used for SD speed up at SEEK, BTM, or AF  
“L” is output at tuner off  
82  
83  
SEEKOUT  
SD-IN  
O
I
Station detector detect input from the FM/AM tuner unit (TU1)  
Stop level for SEEK, BTM, etc. is determined SD is present at input of “H”  
84  
85  
86  
87  
88  
89  
MONO  
PLL CE  
HSTX  
MD2  
O
O
I
Not used (open)  
PLL serial chip enable signal output terminal Not used (open)  
Hardware standby input terminal “L”: hardware standby mode Reset signal input in this set  
Setting terminal for the CPU operational mode (fixed at “L” in this set)  
Setting terminal for the CPU operational mode (fixed at “H” in this set)  
Setting terminal for the CPU operational mode (fixed at “H” in this set)  
I
MD1  
I
MD0  
I
System reset signal input from the reset signal generator (IC801) and reset switch (S900)  
“L”: reset “L” is input for several 100 msec after power on, then it changes to “H”  
90  
RESET  
I
91  
92  
93  
94  
VSS  
X0  
—
I
Ground terminal  
Main system clock input terminal (3.68 MHz)  
Main system clock output terminal (3.68 MHz)  
Power supply terminal (+5V)  
X1  
O
—
VCC  
Power select switch input terminal “L”: off (halt mode), “H”: on (operation mode)  
Not used (open)  
95  
POW-SEL  
I
96  
POL MONO  
NC  
I
Polar monaural detection signal input terminal Not used (open)  
Not used (open)  
97 to 99  
O
Frequency select switch (S701) input terminal  
“L”: MW10k step/FM 200k step, “H”: MW 9k step/FM 50k step  
Used for the E model only (Except E models: fixed at “H”)  
BAND  
(9K-10K)  
100  
101  
102  
I
O
I
NC  
Not used (open)  
Internal RAM reset detection signal input from the RN5VD23AA (IC802)  
Input terminal to check that RAM data are not destroyed due to low voltage  
This checking is made within 100 msec after reset  
RAMBU  
103  
104  
NC  
O
O
Not used (open)  
LCD CE  
Chip enable signal output to the liquid crystal display driver (IC801) “H” active  
Internal flash memory data write mode detection signal input terminal “L”: data write mode  
Not used (fixed at “H” in this set)  
105  
I
FLASH-W  
106  
107  
RE-IN0  
RE-IN1  
I
I
Dial pulse input of the rotary encoder (EN801)  
(for VOLUME/BASS/TREBLE/BALANCE/FADER control)  
LAMP ON  
(ILL ON)  
Power on/off control signal output of the illumination LED and liquid crystal display driver  
(IC801) “H”: power on  
108  
109  
110  
O
O
O
PW-ON  
Main system power supply on/off control signal output to the BA3918 (IC800) “H”: power on  
FM system power supply on/off control signal output to the BA3918 (IC800)  
“L”: AM power on, “H”: FM power on  
FM-ON  
Download from Www.Som–anu7a0ls.c–om. All Manuals Search And Download.  
Pin No.  
Pin Name  
I/O  
Function  
Tuner system power supply on/off control signal output to the BA3918 (IC800)  
“H”: tuner power on  
111  
TU-ON  
O
112 to 118  
119  
NC  
VSS  
NC  
O
—
O
Not used (open)  
Ground terminal  
Not used (open)  
120  
– 71 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5  
EXPLODED VIEWS  
NOTE:  
• -XX and -X mean standardized parts, so they  
may have some difference from the original  
one.  
• Color Indication of Appearance Parts  
Example:  
•
Items marked “*” are not stocked since they  
are seldom required for routine service. Some  
delay should be anticipated when ordering  
these items.  
The mechanical parts with no reference num-  
ber in the exploded views are not supplied.  
Hardware (# mark) list and accessories and  
packing materials are given in the last of the  
electrical parts list.  
The components identified by  
mark ! or dotted line with mark  
! are critical for safety.  
Replace only with part number  
specified.  
•
•
Les composants identifiés par une  
marque ! sont critiquens pour la  
sécurité.  
Ne les remplacer que par une pièce  
portant le numéro spécifié.  
KNOB, BALANCE (WHITE) . . . (RED)  
↑
↑
Parts Color Cabinet's Color  
(1) GENERAL SECTION  
12  
7
11  
F1  
MG-164N-138  
13  
10  
#3  
8
#3  
9
6
C5970  
5
4
3
14  
16  
C5960R/C5970R  
2
16  
#2  
#1  
15  
#2  
1
Front panel section  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
1
2
3
3-919-344-41 DOOR (MD)  
3-919-343-01 SPRING (DOOR), TORSION  
3-033-731-01 PANEL, SUB  
* 9  
3-022-317-01 BRACKET (AMP)  
3-023-604-01 HEAT SINK (C5970/C5970R)  
3-023-604-11 HEAT SINK (C5960R)  
3-011-999-01 CUSHION (MD)  
* 10  
* 10  
11  
4
X-3367-636-1 LOCK ASSY  
* 5  
3-014-156-01 SHEET (INSULATING)  
* 12  
X-3377-103-1 COVER ASSY  
6
* 7  
3-376-464-11 SCREW (+PTT 2.6X6), GROUND POINT  
A-3294-572-A MAIN BOARD, COMPLETE  
13  
14  
3-932-860-01 SCREW (2.6X4) (C TIGHT), +PTT  
3-360-123-01 PLATE (C), GROUND  
X-3373-358-1 CHASSIS ASSY  
(C5970: US, Canadian) * 15  
* 7  
* 7  
* 7  
A-3294-654-A MAIN BOARD, COMPLETE (C5970: E)  
A-3294-670-A MAIN BOARD, COMPLETE (C5970R: AEP, UK)  
A-3294-680-A MAIN BOARD, COMPLETE (C5970R: German)  
16  
16  
1-776-207-72 CORD (WITH CONNECTOR) (POWER) (C5970)  
1-776-527-71 CORD (WITH CONNECTOR) (ISO) (POWER)  
(C5960R/C5970R)  
* 7  
* 8  
A-3294-681-A MAIN BOARD, COMPLETE (C5960R)  
3-011-078-01 BRACKET (POWER IC)  
F1  
1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) (10A)  
Download from Www.Som–anu7a2ls.c–om. All Manuals Search And Download.  
(2) FRONT PANEL SECTION  
69  
70  
68  
67  
not supplied  
(KEY board)  
66  
65  
56  
64  
63  
#4  
LCD801  
67  
62  
59  
57  
58  
55  
60  
54  
53  
61  
71  
C5970  
51  
C5960R/C5970R  
52  
51  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
51  
51  
3-033-694-01 BUTTON (EJ) (6. LIST. DSPL) (C5970)  
3-033-714-01 BUTTON (EJ) (6. PTY. AF/TA. DSPL)  
(C5960R/C5970R) * 61  
3-023-611-03 BUTTON (10KEY) (OFF. SHIFT. 1. 2. 3. 4.  
59  
60  
3-023-616-11 BUTTON (SOUND)  
3-033-705-01 PLATE (R), LIGHT GUIDE  
3-033-706-01 PLATE (LCD), GROUND  
3-023-621-02 SHEET (LCD)  
52  
* 62  
5. 6. 7. 8. 9. 10) * 63  
3-033-696-01 SHEET (LCD), DIFFUSION  
53  
53  
3-023-617-31 BUTTON (RELEASE) (C5970/C5970R)  
3-023-617-41 BUTTON (RELEASE) (C5960R)  
* 64  
* 65  
66  
* 67  
68  
3-023-609-01 PLATE (LCD), LIGHT GUIDE  
3-033-707-01 HOLDER (LCD)  
3-023-626-21 BUTTON (SOURCE)  
3-026-158-01 SPACER (SOURCE)  
3-023-612-21 KNOB (VOL)  
54  
55  
55  
55  
56  
3-008-667-01 SPRING (RELEASE)  
X-3376-943-1 PANEL ASSY, FRONT (C5970)  
X-3377-403-1 PANEL ASSY, FRONT (C5970R)  
X-3377-404-1 PANEL ASSY, FRONT (C5960R)  
3-033-695-01 KNOB (AMS) (+. -) (C5970/C5970R)  
69  
70  
71  
71  
3-033-715-01 RING, LIGHT GUIDE  
3-033-697-01 PANEL, BACK  
3-023-625-11 KNOB (D) (C5970/C5970R)  
3-023-625-21 KNOB (D) (C5960R)  
56  
57  
58  
3-033-695-11 KNOB (AMS) (+. -) (C5960R)  
3-023-629-01 BUTTON (MODE)  
3-033-704-01 PLATE (L), LIGHT GUIDE  
LCD801 1-803-502-21 DISPLAY PANEL, LIQUID CRYSTAL  
– 73 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(3) MECHANISM DECK SECTION-1  
(MG-164N-138)  
112  
#8  
113  
114  
#6  
106  
111  
107  
109  
115  
109  
110  
116  
109  
117  
118  
105  
#6  
#6  
#6  
111  
105  
104  
108  
103  
103  
104  
102  
101  
#5  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
* 101  
* 102  
103  
104  
105  
A-3317-459-A SERVO BOARD, COMPLETE  
X-3376-799-1 CHASSIS ASSY, MD  
3-032-714-01 SPRING (FLOAT F), TENSION  
3-921-111-01 SPRING (FL 2), TENSION  
3-919-273-01 DAMPER, OIL  
* 110  
111  
* 112  
113  
3-032-712-01 LEVER (LOCK R)  
3-919-281-01 SPRING (CHUCKING)  
X-3376-800-1 COVER ASSY, MD  
3-035-932-01 WASHER, STOPPER  
X-3376-797-1 LEVER (LE) ASSY  
* 114  
* 106  
107  
* 108  
* 109  
X-3376-796-1 HOLDER ASSY  
3-032-682-01 SPRING (HOLDER)  
3-034-301-01 CUSHION (EJ2)  
3-034-302-01 CUSHION (EJ3)  
115  
116  
* 117  
* 118  
3-032-707-01 SPRING (LEVER LE)  
3-925-034-01 ROLLER (GLE)  
X-3376-798-1 ARM ASSY, CHUCKING  
3-032-711-01 LEVER (LOCK L)  
Download from Www.Som–anu7a4ls.c–om. All Manuals Search And Download.  
(4) MECHANISM DECK SECTION-2  
(MG-164N-138)  
157  
158  
M903  
159  
M901  
156  
#9  
161  
#9  
155  
#7  
162  
#8  
160  
164  
163  
M902  
#8  
154  
165  
#7  
152  
153  
166  
151  
The components identified by Les composants identifiés par une  
mark ! or dotted line with marque ! sont critiques pour la  
mark ! are critical for safety. sécurité.  
Replace only with part num- Ne les remplacer que par une pièce  
ber specified.  
portant le numéro spécifié.  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No. Part No.  
Description  
Remark  
151  
152  
153  
2-626-617-01 SCREW (2X8)  
161  
162  
163  
X-3373-213-1 SCREW ASSY, FEED  
3-703-816-32 SCREW (M1.4X1.6), SPECIAL HEAD  
3-010-091-01 SPRING (SL FEED)  
A-3317-457-A SENSOR BOARD, COMPLETE  
1-654-693-11 SENSOR FLEXIBLE BOARD  
3-919-283-01 BRACKET (SL)  
154  
164  
3-919-293-01 SHAFT (SL)  
* 155  
3-032-704-01 BASE (SL)  
!165  
8-583-046-05 OPTICAL PICK-UP KMS-241B/J1RP  
156  
157  
158  
159  
* 160  
3-919-297-01 RETAINER (SP)  
A-3301-750-A CHASSIS (OP) ASSY  
3-032-660-01 BRACKET (LO)  
3-032-669-01 SPRING (RACK), TENSION  
3-032-705-01 BEARING (SL)  
166  
M901  
M902  
M903  
3-920-537-01 SHAFT (SL 2)  
A-3301-407-A MOTOR ASSY, SP (SPINDLE)  
A-3291-190-A MOTOR ASSY, SL (SLED)  
A-3291-191-A MOTOR ASSY, LO (LOADING)  
– 75 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6  
ELECTRICAL PARTS LIST  
KEY  
NOTE:  
• Due to standardization, replacements in the  
parts list may be different from the parts speci-  
fied in the diagrams or the components used  
on the set.  
• -XX and -X mean standardized parts, so they  
may have some difference from the original  
one.  
• RESISTORS  
All resistors are in ohms.  
METAL: Metal-film resistor.  
METAL OXIDE: Metal oxide-film resistor.  
F: nonflammable  
•
Items marked “*” are not stocked since they  
are seldom required for routine service.  
Some delay should be anticipated when order-  
ing these items.  
SEMICONDUCTORS  
In each case, u: µ, for example:  
The components identified by  
mark ! or dotted line with mark  
! are critical for safety.  
Replace only with part number  
specified.  
•
Les composants identifiés par une  
marque ! sont critiquens pour la  
sécurité.  
Ne les remplacer que par une pièce  
portant le numéro spécifié.  
uA. . : µA. .  
uPB. . : µPB. .  
uPD. . : µPD. .  
CAPACITORS  
uF: µF  
uPA. . : µPA. .  
uPC. . : µPC. .  
•
•
When indicating parts by reference  
number, please include the board.  
COILS  
uH: µH  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
KEY BOARD  
D814  
8-719-033-14 LED CL-170PG-CD-T (GREEN)  
*********  
(ILLUMINATION)  
(ILLUMINATION)  
D815  
8-719-033-13 LED CL-170Y-CD-T (AMBER)  
*
*
*
*
*
3-023-609-01 PLATE (LCD), LIGHT GUIDE  
3-023-621-02 SHEET (LCD)  
3-033-696-01 SHEET (LCD), DIFFUSION  
3-033-706-01 PLATE (LCD), GROUND  
3-033-707-01 HOLDER (LCD)  
D815  
D816  
D816  
D817  
D817  
8-719-033-14 LED CL-170PG-CD-T (GREEN)  
(ILLUMINATION)  
8-719-033-13 LED CL-170Y-CD-T (AMBER)  
(ILLUMINATION)  
8-719-033-14 LED CL-170PG-CD-T (GREEN)  
(ILLUMINATION)  
< CAPACITOR >  
C802  
C803  
C804  
C805  
C806  
1-163-809-11 CERAMIC CHIP 0.047uF 10%  
25V  
16V  
16V  
16V  
25V  
8-719-033-13 LED CL-170Y-CD-T (AMBER)  
1-164-489-11 CERAMIC CHIP 0.22uF  
1-164-489-11 CERAMIC CHIP 0.22uF  
1-164-489-11 CERAMIC CHIP 0.22uF  
10%  
10%  
10%  
(ILLUMINATION)  
8-719-033-14 LED CL-170PG-CD-T (GREEN)  
(ILLUMINATION)  
1-163-809-11 CERAMIC CHIP 0.047uF 10%  
D819  
8-719-977-00 DIODE DTZ5.1C  
< ROTARY ENCODER >  
C811  
C812  
C813  
C814  
C815  
1-163-009-11 CERAMIC CHIP 0.001uF 10%  
1-163-009-11 CERAMIC CHIP 0.001uF 10%  
1-163-009-11 CERAMIC CHIP 0.001uF 10%  
1-163-009-11 CERAMIC CHIP 0.001uF 10%  
1-163-009-11 CERAMIC CHIP 0.001uF 10%  
50V  
50V  
50V  
50V  
50V  
EN801 1-475-014-11 ENCODER, ROTARY (VOLUME/BASS/TREBLE/  
BALANCE/FADER CONTROL)  
< CONNECTOR >  
< IC >  
CNP801 1-764-423-11 PIN, CONNECTOR 12P  
< DIODE >  
IC801 8-759-496-75 IC uPD16432BGC-018-9EU  
< LIQUID CRYSTAL DISPLAY >  
D802  
D803  
D804  
D806  
D807  
8-719-056-83 DIODE UDZ-TE-17-6.8B  
8-719-056-83 DIODE UDZ-TE-17-6.8B  
8-719-056-83 DIODE UDZ-TE-17-6.8B  
8-719-977-00 DIODE DTZ5.1C  
LCD801 1-803-502-21 DISPLAY PANEL, LIQUID CRYSTAL  
< SWITCH >  
8-719-977-00 DIODE DTZ5.1C  
LSW801 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(OFF)  
LSW801 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(OFF)  
D808  
D811  
8-719-978-69 DIODE DTZ-TT11-16B  
8-719-033-13 LED CL-170Y-CD-T (AMBER)  
(ILLUMINATION)  
(ILLUMINATION)  
(ILLUMINATION)  
LSW802 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(SOURCE)  
LSW802 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(SOURCE)  
LSW803 1-771-290-11 SWITCH, SLIDE  
(- = 0, + ) +: SEEK/AMS)  
D811  
D812  
D812  
8-719-033-14 LED CL-170PG-CD-T(GREEN)  
8-719-033-13 LED CL-170Y-CD-T (AMBER)  
8-719-033-14 LED CL-170PG-CD-T (GREEN)  
(ILLUMINATION)  
LSW804 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(DSPL) (C5960R/C5970R)  
LSW804 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(DSPL) (C5970R)  
LSW805 1-762-937-11 SWITCH, ROTARY (D-BASS)  
LSW806 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(SOUND)  
D813  
D813  
D814  
8-719-033-13 LED CL-170Y-CD-T (AMBER)  
(ILLUMINATION)  
8-719-033-14 LED CL-170PG-CD-T (GREEN)  
(ILLUMINATION)  
8-719-033-13 LED CL-170Y-CD-T (AMBER)  
(ILLUMINATION)  
Download from Www.Som–anu7a6ls.c–om. All Manuals Search And Download.  
KEY  
Ref. No.  
LSW806 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(SOUND)  
LSW807 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(MODE)  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
LSW821 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
LSW821 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
< PILOT LAMP >  
(3)  
(3)  
LSW807 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(MODE)  
LSW808 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(SHIFT)  
LSW808 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(SHIFT)  
PL801 1-517-630-31 LAMP, PILOT (LCD BACK LIGHT)  
PL802 1-517-630-31 LAMP, PILOT (LCD BACK LIGHT)  
LSW809 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
< TRANSISTOR >  
(1)  
(1)  
LSW809 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
Q805  
Q806  
Q807  
8-729-106-60 TRANSISTOR 2SB1115A-YQ  
8-729-026-53 TRANSISTOR 2SA1576A-T106-QR  
8-729-905-35 TRANSISTOR 2SC4081T106R  
LSW810 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
LSW810 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
LSW811 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(6)  
LSW811 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(6)  
LSW812 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(2)  
(2)  
< RESISTOR >  
R801  
R802  
R803  
R804  
R805  
1-208-431-11 RES, CHIP  
1-216-647-11 METAL CHIP  
1-216-647-11 METAL CHIP  
1-216-651-11 METAL CHIP  
1-216-655-11 METAL CHIP  
560  
680  
680  
1K  
2%  
1/10W  
0.5% 1/10W  
0.5% 1/10W  
0.5% 1/10W  
0.5% 1/10W  
1.5K  
(AF/TA) (C5960R/C5970R)  
R806  
R807  
R808  
R809  
R811  
1-216-655-11 METAL CHIP  
1-216-659-11 METAL CHIP  
1-216-663-11 METAL CHIP  
1-216-667-11 METAL CHIP  
1-208-431-11 RES, CHIP  
1.5K  
2.2K  
3.3K  
4.7K  
560  
0.5% 1/10W  
0.5% 1/10W  
0.5% 1/10W  
0.5% 1/10W  
LSW812 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(AF/TA) (C5970R)  
LSW812 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(DSPL) (C5970)  
2%  
1/10W  
LSW813 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(LIST, PTY) (C5960R/C5970R)  
LSW813 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(LIST, PTY) (C5970R)  
LSW813 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(LIST) (C5970R)  
R812  
R813  
R814  
R815  
R816  
1-216-647-11 METAL CHIP  
1-216-647-11 METAL CHIP  
1-208-427-11 RES, CHIP  
1-208-441-11 RES, CHIP  
1-216-655-11 METAL CHIP  
680  
680  
390  
1.5K  
1.5K  
0.5% 1/10W  
0.5% 1/10W  
2%  
2%  
1/10W  
1/10W  
0.5% 1/10W  
R817  
R818  
R819  
R820  
R823  
1-208-445-11 RES, CHIP  
1-208-449-11 RES, CHIP  
1-208-453-11 RES, CHIP  
1-208-458-11 RES, CHIP  
1-216-023-00 RES, CHIP  
2.2K  
3.3K  
4.7K  
6.8K  
82  
2%  
2%  
2%  
2%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
(C5970)  
LSW814 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(10)  
LSW814 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(10)  
LSW815 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(9)  
LSW815 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
R823  
R827  
R827  
R829  
R829  
1-216-028-00 METAL CHIP  
1-216-023-00 RES, CHIP  
1-216-028-00 METAL CHIP  
1-216-023-00 RES, CHIP  
1-216-028-00 METAL CHIP  
130  
82  
5%  
1/10W  
(9)  
(C5960R/C5970R)  
5%  
LSW816 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(8)  
1/10W  
(C5970)  
1/10W  
130  
82  
5%  
LSW816 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(C5960R/C5970R)  
5%  
(8)  
1/10W  
(C5970)  
1/10W  
LSW817 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(7)  
130  
5%  
LSW817 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(C5960R/C5970R)  
(7)  
LSW818 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
R831  
R831  
R833  
R833  
R835  
1-216-023-00 RES, CHIP  
1-216-028-00 METAL CHIP  
1-216-028-00 METAL CHIP  
1-216-034-00 RES, CHIP  
1-216-047-00 RES, CHIP  
82  
5%  
5%  
1/10W  
(C5970)  
1/10W  
(6)  
LSW818 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(6)  
130  
130  
240  
820  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
LSW819 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(5)  
5%  
1/10W  
(C5970)  
1/10W  
(C5970)  
LSW819 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(5)  
5%  
LSW820 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (AMBER)  
(4)  
LSW820 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (GREEN)  
(4)  
R835  
1-216-048-00 METAL CHIP  
910  
5%  
1/10W  
(C5960R/C5970R)  
– 77 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY MAIN  
Ref. No.  
R838  
Part No.  
Description  
Remark  
Ref. No.  
C5  
Part No.  
Description  
Remark  
1-216-023-00 RES, CHIP  
82  
5%  
5%  
1/10W  
(C5970)  
1/10W  
1-163-019-00 CERAMIC CHIP 0.0068uF 10%  
50V  
(C5970: E)  
10% 50V  
(C5970: US, Canadian)  
R838  
1-216-028-00 METAL CHIP  
130  
C5  
C6  
C6  
1-163-021-11 CERAMIC CHIP 0.01uF  
(C5960R/C5970R)  
R840  
R841  
R842  
1-216-041-00 METAL CHIP  
1-216-025-00 RES, CHIP  
1-216-047-00 RES, CHIP  
470  
100  
820  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
(C5970)  
1-163-019-00 CERAMIC CHIP 0.0068uF 10%  
50V  
(C5970: E)  
10% 50V  
(C5970: US, Canadian)  
1-163-021-11 CERAMIC CHIP 0.01uF  
R842  
1-216-048-00 METAL CHIP  
910  
5%  
1/10W  
C7  
C8  
C10  
C11  
C12  
1-163-137-00 CERAMIC CHIP 680PF  
1-163-137-00 CERAMIC CHIP 680PF  
5%  
5%  
20%  
10%  
5%  
50V  
50V  
16V  
50V  
50V  
(C5960R/C5970R)  
0.5% 1/10W  
0.5% 1/10W  
0.5% 1/10W  
0.5% 1/10W  
R845  
R846  
R847  
R849  
1-216-699-11 METAL CHIP  
1-216-651-11 METAL CHIP  
1-216-651-11 METAL CHIP  
1-216-667-11 METAL CHIP  
100K  
1K  
1K  
1-126-791-11 ELECT  
10uF  
1-163-021-11 CERAMIC CHIP 0.01uF  
1-163-137-00 CERAMIC CHIP 680PF  
4.7K  
C13  
C14  
C15  
C16  
C17  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-163-251-11 CERAMIC CHIP 100PF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-251-11 CERAMIC CHIP 100PF  
10%  
5%  
10%  
5%  
25V  
50V  
25V  
50V  
50V  
R850  
R852  
R853  
R854  
R856  
1-216-667-11 METAL CHIP  
1-216-061-00 METAL CHIP  
1-216-069-00 METAL CHIP  
1-216-081-00 METAL CHIP  
1-216-041-00 METAL CHIP  
4.7K  
3.3K  
6.8K  
22K  
470  
0.5% 1/10W  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
5%  
C18  
C19  
C20  
C21  
C22  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-275-11 CERAMIC CHIP 0.001uF 5%  
1-163-021-11 CERAMIC CHIP 0.01uF  
1-163-019-00 CERAMIC CHIP 0.0068uF 10%  
1-163-019-00 CERAMIC CHIP 0.0068uF 10%  
5%  
50V  
50V  
50V  
50V  
50V  
R857  
R861  
R862  
R863  
R865  
1-216-295-00 SHORT  
0 (C5970)  
470  
2.2K  
2.2K  
3.3K  
1-216-041-00 METAL CHIP  
1-216-659-11 METAL CHIP  
1-208-445-11 RES, CHIP  
1-216-061-00 METAL CHIP  
5%  
1/10W  
10%  
0.5% 1/10W  
10%  
5%  
1/10W  
1/10W  
C23  
C24  
1-164-344-11 CERAMIC CHIP 0.068uF 10%  
1-163-009-11 CERAMIC CHIP 0.001uF 10%  
25V  
50V  
R866  
R867  
1-216-061-00 METAL CHIP  
1-216-061-00 METAL CHIP  
3.3K  
3.3K  
5%  
5%  
1/10W  
1/10W  
(C5960R/C5970R)  
C24  
1-163-021-11 CERAMIC CHIP 0.01uF  
10%  
50V  
< CONPOSITION CIRCUIT BLOCK >  
(C5970)  
25V  
16V  
C25  
C26  
1-126-794-11 ELECT  
1-126-382-11 ELECT  
4.7uF  
100uF  
20%  
20%  
RB802 1-233-810-21 RES, NETWORK 100K (3216)  
RB803 1-233-414-11 RES, CHIP NETWORK 4.7K (3216)  
************************************************************  
C27  
C28  
C29  
C30  
C31  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-126-382-11 ELECT 100uF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-126-382-11 ELECT 100uF  
10%  
20%  
10%  
20%  
10%  
25V  
16V  
25V  
16V  
25V  
*
A-3294-572-A MAIN BOARD, COMPLETE  
(C5970: US, Canadian)  
*
*
*
*
A-3294-654-A MAIN BOARD, COMPLETE (C5970: E)  
A-3294-670-A MAIN BOARD, COMPLETE (C5970R: AEP, UK)  
A-3294-680-A MAIN BOARD, COMPLETE (C5970R: German)  
A-3294-681-A MAIN BOARD, COMPLETE (C5960R)  
*********************  
1-164-004-11 CERAMIC CHIP 0.1uF  
C35  
C39  
C40  
C41  
C42  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-163-015-11 CERAMIC CHIP 0.0033uF 10%  
10%  
25V  
50V  
16V  
50V  
50V  
1-126-382-11 ELECT  
100uF  
20%  
5%  
10%  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-021-11 CERAMIC CHIP 0.01uF  
*
*
*
*
3-011-078-01 BRACKET (POWER IC)  
3-022-317-01 BRACKET (AMP)  
3-023-604-01 HEAT SINK (C5970/C5970R)  
3-023-604-11 HEAT SINK (C5960R)  
7-685-794-09 SCREW +PTT 2.6X10 (S)  
C43  
C44  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-275-11 CERAMIC CHIP 0.001uF 5%  
5%  
50V  
50V  
(C5960R/C5970R)  
C45  
C46  
C47  
1-163-275-11 CERAMIC CHIP 0.001uF 5%  
(C5960R/C5970R)  
1-163-275-11 CERAMIC CHIP 0.001uF 5%  
50V  
< BUZZER >  
1-504-920-11 BUZZER  
< CAPACITOR/RESISTOR >  
50V  
BZ1  
(C5960R/C5970R)  
0.5PF 50V  
1-163-227-11 CERAMIC CHIP 10PF  
(C5960R/C5970R)  
C1  
C2  
C3  
1-163-235-11 CERAMIC CHIP 22PF  
1-163-021-11 CERAMIC CHIP 0.01uF  
1-162-587-11 CERAMIC CHIP 0.039uF 10%  
5%  
10%  
50V  
50V  
25V  
(C5970)  
25V  
C48  
C49  
C50  
C51  
C52  
1-107-823-11 CERAMIC CHIP 0.47uF  
1-163-133-11 CERAMIC CHIP 470PF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-163-133-00 CERAMIC CHIP 470PF  
1-163-229-11 CERAMIC CHIP 12PF  
10%  
(C5960R/C5970R)  
5% 50V  
(C5960R/C5970R)  
10% 25V  
(C5960R/C5970R)  
5% 50V  
(C5960R/C5970R)  
5% 50V  
(C5960R/C5970R)  
16V  
C3  
C4  
1-163-809-11 CERAMIC CHIP 0.047uF 10%  
(C5960R/C5970R)  
1-163-037-11 CERAMIC CHIP 0.022uF 10%  
25V  
(C5970)  
C4  
1-163-989-11 CERAMIC CHIP 0.033uF 10%  
25V  
(C5960R/C5970R)  
Download from Www.Som–anu7a8ls.c–om. All Manuals Search And Download.  
MAIN  
Ref. No.  
C53  
Part No.  
Description  
Remark  
50V  
Ref. No.  
C318  
Part No.  
Description  
Remark  
50V  
1-163-229-11 CERAMIC CHIP 12PF  
5%  
1-163-251-11 CERAMIC CHIP 100PF  
5%  
(C5960R/C5970R)  
1-163-145-00 CERAMIC CHIP 0.0015uF 5% 50V  
(C5960R/C5970R)  
(C5970/C5970R)  
C54  
C57  
C58  
C59  
C319  
C320  
C322  
C323  
1-164-489-11 CERAMIC CHIP 0.22uF  
10%  
16V  
50V  
50V  
50V  
1-163-009-11 CERAMIC CHIP 0.001uF 10%  
1-164-695-11 CERAMIC CHIP 0.0022uF 5%  
50V  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-251-11 CERAMIC CHIP 100PF  
5%  
5%  
(C5960R/C5970R)  
1-163-135-00 CERAMIC CHIP 560PF  
1-164-505-11 CERAMIC CHIP 2.2uF  
5%  
50V  
(C5960R/C5970R)  
16V  
C324  
C325  
C400  
C401  
C402  
1-164-489-11 CERAMIC CHIP 0.22uF  
1-164-489-11 CERAMIC CHIP 0.22uF  
10%  
10%  
20%  
20%  
10%  
16V  
16V  
50V  
50V  
10V  
(C5960R/C5970R)  
1-115-871-11 ELECT  
1-115-871-11 ELECT  
1uF  
1uF  
C60  
C61  
C63  
C65  
C66  
1-163-263-11 CERAMIC CHIP 330PF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-164-004-11 CERAMIC CHIP 0.1uF  
5%  
(C5960R/C5970R)  
10% 25V  
(C5960R/C5970R)  
10% 25V  
(C5960R/C5970R)  
1-163-809-11 CERAMIC CHIP 0.047uF 10% 25V  
(C5960R/C5970R)  
50V  
1-109-982-11 CERAMIC CHIP 1uF  
C414  
C415  
C416  
C417  
C418  
1-126-794-11 ELECT  
1-126-794-11 ELECT  
4.7uF  
4.7uF  
20%  
20%  
5%  
5%  
5%  
25V  
25V  
50V  
50V  
50V  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-251-11 CERAMIC CHIP 100PF  
(C5970/C5970R)  
1-126-786-11 ELECT  
47uF  
20%  
16V  
C419  
C420  
C424  
C425  
C501  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-251-11 CERAMIC CHIP 100PF  
1-164-489-11 CERAMIC CHIP 0.22uF  
1-164-489-11 CERAMIC CHIP 0.22uF  
1-104-329-11 CERAMIC CHIP 0.1uF  
5%  
5%  
10%  
10%  
10%  
50V  
50V  
16V  
16V  
50V  
C67  
C68  
C69  
C70  
C71  
1-126-382-11 ELECT  
100uF  
20%  
10%  
5%  
5%  
20%  
16V  
25V  
50V  
50V  
16V  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-251-11 CERAMIC CHIP 100PF  
1-126-514-11 ELECT  
22uF  
C502  
C503  
C504  
C505  
C506  
1-115-334-11 FILM  
1-126-786-11 ELECT  
1-104-329-11 CERAMIC CHIP 0.1uF  
1-104-329-11 CERAMIC CHIP 0.1uF  
1-163-021-11 CERAMIC CHIP 0.01uF  
0.47uF  
47uF  
5%  
50V  
16V  
50V  
50V  
50V  
C74  
C79  
1-163-251-11 CERAMIC CHIP 100PF  
1-164-004-11 CERAMIC CHIP 0.1uF  
5%  
10%  
(C5960R/C5970R)  
10% 50V  
(C5960R/C5970R)  
50V  
25V  
20%  
10%  
10%  
10%  
C81  
1-163-021-11 CERAMIC CHIP 0.01uF  
C507  
C508  
C510  
C601  
C700  
1-126-016-11 ELECT  
1-104-329-11 CERAMIC CHIP 0.1uF  
1-126-786-11 ELECT  
1-126-794-11 ELECT  
1-164-346-11 CERAMIC CHIP 1uF  
4700uF 20%  
16V  
50V  
16V  
25V  
16V  
C82  
C90  
1-163-137-00 CERAMIC CHIP 680PF  
1-164-346-11 CERAMIC CHIP 1uF  
5%  
50V  
10%  
20%  
20%  
(C5960R/C5970R)  
16V  
(C5960R/C5970R)  
47uF  
4.7uF  
C97  
C100  
C101  
1-163-009-11 CERAMIC CHIP 0.001uF 10%  
50V  
10V  
10V  
1-109-982-11 CERAMIC CHIP 1uF  
1-109-982-11 CERAMIC CHIP 1uF  
10%  
10%  
C701  
C702  
C703  
C704  
C705  
1-126-794-11 ELECT  
1-126-514-11 ELECT  
1-163-133-00 CERAMIC CHIP 470PF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-164-004-11 CERAMIC CHIP 0.1uF  
4.7uF  
22uF  
20%  
20%  
5%  
10%  
10%  
25V  
16V  
50V  
25V  
25V  
C107  
C108  
C109  
1-164-004-11 CERAMIC CHIP 0.1uF  
10%  
25V  
(C5960R/C5970R)  
1-163-013-11 CERAMIC CHIP 0.0022uF 10% 50V  
(C5960R/C5970R)  
C706  
C707  
C708  
C709  
C710  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-163-021-11 CERAMIC CHIP 0.01uF  
1-163-235-11 CERAMIC CHIP 22PF  
1-163-237-11 CERAMIC CHIP 27PF  
1-164-346-11 CERAMIC CHIP 1uF  
10%  
10%  
5%  
25V  
50V  
50V  
50V  
16V  
1-163-013-11 CERAMIC CHIP 0.0022uF 10%  
50V  
(C5960R/C5970R)  
20%  
20%  
C222  
C223  
1-126-791-11 ELECT  
1-126-791-11 ELECT  
10uF  
10uF  
16V  
16V  
5%  
C230  
C250  
C251  
C252  
C253  
1-164-004-11 CERAMIC CHIP 0.1uF  
10%  
25V  
16V  
6.3V  
50V  
16V  
C711  
C712  
C800  
C801  
C802  
1-164-004-11 CERAMIC CHIP 0.1uF  
10%  
20%  
20%  
20%  
20%  
25V  
16V  
16V  
16V  
16V  
1-126-767-11 ELECT  
1-124-635-00 ELECT  
1000uF 20%  
220uF  
1-126-382-11 ELECT  
1-126-791-11 ELECT  
1-126-791-11 ELECT  
1-126-791-11 ELECT  
100uF  
10uF  
10uF  
10uF  
20%  
5%  
20%  
1-163-125-00 CERAMIC CHIP 220PF  
1-126-382-11 ELECT  
100uF  
C256  
C257  
C300  
C301  
C302  
1-126-791-11 ELECT  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-115-871-11 ELECT  
1-115-871-11 ELECT  
1-109-982-11 CERAMIC CHIP 1uF  
10uF  
20%  
10%  
20%  
20%  
10%  
16V  
25V  
50V  
50V  
10V  
C803  
C804  
C805  
C806  
C807  
1-126-791-11 ELECT  
1-126-791-11 ELECT  
1-126-791-11 ELECT  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-164-505-11 CERAMIC CHIP 2.2uF  
10uF  
10uF  
10uF  
20%  
20%  
20%  
10%  
16V  
16V  
16V  
25V  
16V  
1uF  
1uF  
C303  
C314  
C315  
C316  
C317  
1-164-004-11 CERAMIC CHIP 0.1uF  
10%  
20%  
20%  
5%  
25V  
25V  
25V  
50V  
50V  
C808  
C900  
C901  
C902  
C903  
1-164-004-11 CERAMIC CHIP 0.1uF  
10%  
20%  
5%  
5%  
10%  
25V  
16V  
50V  
50V  
25V  
1-126-794-11 ELECT  
1-126-794-11 ELECT  
4.7uF  
4.7uF  
1-126-791-11 ELECT  
10uF  
1-163-133-00 CERAMIC CHIP 470PF  
1-163-133-00 CERAMIC CHIP 470PF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-163-251-11 CERAMIC CHIP 100PF  
1-163-251-11 CERAMIC CHIP 100PF  
5%  
C904  
1-124-635-00 ELECT  
220uF  
20%  
6.3V  
– 79 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAIN  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
C905  
C906  
C907  
C908  
1-125-710-11 DOUBLE LAYER 0.1F  
1-164-489-11 CERAMIC CHIP 0.22uF  
1-164-489-11 CERAMIC CHIP 0.22uF  
1-164-004-11 CERAMIC CHIP 0.1uF  
5.5V  
16V  
16V  
25V  
D702  
D703  
8-719-914-44 DIODE DAP202K  
8-719-988-61 DIODE 1SS355TE-17  
10%  
10%  
10%  
D800  
D802  
D801  
D803  
D804  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-988-61 DIODE 1SS355TE-17  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-053-18 DIODE 1SR154-400TE-25  
C920  
C990  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-164-346-11 CERAMIC CHIP 1uF  
10%  
25V  
16V  
(C5960R/C5970R)  
C991  
C992  
C999  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-163-133-00 CERAMIC CHIP 470PF  
10%  
10%  
5%  
25V  
25V  
50V  
D900  
D901  
D902  
D903  
D904  
8-719-988-61 DIODE 1SS355TE-17  
8-719-056-88 DIODE UDZ-TE-17-11B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
C1000 1-164-004-11 CERAMIC CHIP 0.1uF  
< CONNECTOR >  
10%  
25V  
D905  
D907  
D908  
D909  
D910  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
CN200 1-764-617-12 PIN, CONNECTOR (PC BOARD) 30P  
CN900 1-764-422-11 PLUG, CONNECTOR 12P  
CNJ600 1-580-907-31 PLUG, CONNECTOR (BUS CONTROL IN)  
< JACK/CONNECTOR >  
D911  
D912  
D913  
D914  
D915  
8-719-158-49 DIODE RD12SB2  
8-719-914-44 DIODE DAP202K  
8-719-056-85 DIODE UDZ-TE-17-8.2B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
8-719-056-84 DIODE UDZ-TE-17-7.5B  
CNP300 1-774-699-12 JACK, PIN 4P (BUS AUDIO IN, AUDIO OUT)  
(C5960R)  
CNP300 1-774-700-11 JACK, PIN 6P (BUS AUDIO IN, LINE OUT  
FRONT, LINE OUT REAR) (C5970/C5970R)  
CNP500 1-774-701-11 PIN, CONNECTOR 16P  
D916  
8-719-988-61 DIODE 1SS355TE-17  
< FUSE >  
< DIODE >  
D1  
D3  
D5  
D6  
D7  
8-719-158-15 DIODE RD5.6S-B  
8-719-981-59 DIODE FC805  
8-719-422-12 DIODE MA8039 (C5960R/C5970R)  
8-719-987-69 DIODE DAN217 (C5960R/C5970R)  
8-719-056-83 DIODE UDZ-TE-17-6.8B (C5960R/C5970R)  
F1  
1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) 10A  
< FERRITE BEAD >  
FB1  
FB2  
1-414-233-22 INDUCTOR CHIP 0uH (C5960R/C5970R)  
1-414-233-22 INDUCTOR CHIP 0uH (C5960R/C5970R)  
D8  
8-719-988-61 DIODE 1SS355TE-17 (C5960R/C5970R)  
8-719-066-98 DIODE RB051L-40TE25  
8-719-158-49 DIODE RD12SB2  
8-719-914-42 DIODE DA204K  
8-719-988-61 DIODE 1SS355TE-17  
D200  
D202  
D301  
D500  
< IC >  
IC100 8-759-586-54 IC TDA7427AD  
IC101 8-759-924-46 IC BA4560F (C5960R/C5970R)  
IC102 8-759-492-59 IC SAA6588T-118 (C5960R/C5970R)  
IC250 8-759-337-67 IC NJM2360AM (TE2)  
IC300 8-759-572-10 IC TDA7462D013TR  
D501  
D502  
D503  
D504  
D505  
8-719-056-83 DIODE UDZ-TE-17-6.8B  
8-719-052-59 DIODE 1N5404TU-15  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-053-18 DIODE 1SR154-400TE-25  
IC500 8-759-572-08 IC TDA7385  
IC600 8-759-449-89 IC BA8270F-E2  
D506  
D507  
D508  
D509  
D510  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-053-18 DIODE 1SR154-400TE-25  
8-719-053-18 DIODE 1SR154-400TE-25  
IC700 8-759-581-72 IC MB90574PFV-G-187-BND (C5970)  
IC700 8-759-581-74 IC MB90574PFV-G-188-BND  
(C5960R/C5970R)  
IC800 8-759-347-50 IC BA3918-V3  
IC801 8-759-363-81 IC XC61AN4002PR  
IC802 8-759-495-76 IC RN5VD33AA-TL  
D511  
D520  
D521  
D522  
D600  
8-719-988-61 DIODE 1SS355TE-17 (C5970/C5970R)  
8-719-056-93 DIODE UDZ-TE-17-18B (C5970/C5970R)  
8-719-978-69 DIODE DTZ-TT11-16B  
8-719-158-49 DIODE RD12SB2  
8-719-056-93 DIODE UDZ-TE-17-18B  
< JACK >  
J1  
J900  
1-785-503-11 JACK (ANT) (FM/AM ANTENNA)  
1-566-822-41 JACK (REMOTE IN)  
D601  
D602  
D603  
D604  
D606  
8-719-056-93 DIODE UDZ-TE-17-18B  
8-719-017-62 DIODE MA8068-L-TX  
8-719-978-69 DIODE DTZ-TT11-16B  
8-719-017-62 DIODE MA8068-L-TX  
8-719-914-43 DIODE DAN202K  
< COIL/SHORT >  
L1  
L2  
1-412-058-11 INDUCTOR CHIP 10uH  
1-216-295-00 SHORT  
0 (C5970)  
L2  
L3  
1-410-981-31 INDUCTOR CHIP 0.1uH (C5960R/5970R)  
1-412-058-11 INDUCTOR CHIP 10uH  
D607  
D700  
D701  
8-719-988-61 DIODE 1SS355TE-17  
8-719-914-43 DIODE DAN202K  
8-719-422-12 DIODE MA8039  
L200  
L240  
1-412-058-11 INDUCTOR CHIP 10uH  
1-412-945-11 INDUCTOR  
3.3uH  
Download from Www.Som–anu8a0ls.c–om. All Manuals Search And Download.  
MAIN  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
L250  
L251  
L252  
L500  
L700  
1-412-533-21 INDUCTOR  
1-412-537-31 INDUCTOR  
1-412-533-21 INDUCTOR  
1-416-712-21 COIL, CHOKE 0.5A  
1-412-058-11 INDUCTOR CHIP 10uH  
47uH  
100uH  
47uH  
R4  
R5  
R6  
R7  
R8  
1-216-081-00 METAL CHIP  
1-216-049-11 RES,CHIP  
1-216-037-00 METAL CHIP  
1-216-073-00 METAL CHIP  
1-216-081-00 METAL CHIP  
22K  
1K  
330  
10K  
22K  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
(C5960R/C5970R)  
L800  
1-469-086-21 INDUCTOR  
22uH  
R10  
R11  
R12  
R13  
R14  
1-216-073-00 METAL CHIP  
1-216-083-00 METAL CHIP  
1-216-077-00 METAL CHIP  
1-216-295-00 SHORT  
10K  
27K  
15K  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
< TRANSISTOR >  
Q1  
Q4  
Q5  
Q6  
Q50  
8-729-230-49 TRANSISTOR 2SC2712-YG (C5970)  
8-729-620-06 TRANSISTOR 2SC3052-EF  
8-729-900-53 TRANSISTOR DTC114EK (C5960R/C5970R)  
8-729-920-85 TRANSISTOR 2SD1664-QR  
8-729-230-49 TRANSISTOR 2SC2712-YG  
(C5960R/C5970R)  
0 (C5960R/C5970R)  
100K  
1-216-097-00 RES,CHIP  
5%  
1/10W  
R15  
1-216-081-00 METAL CHIP  
22K  
5%  
1/10W  
(C5970)  
1/10W  
1/10W  
1/10W  
1/10W  
R16  
R17  
R18  
R19  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-073-00 METAL CHIP  
1-216-113-00 METAL CHIP  
100  
100  
10K  
470K  
5%  
5%  
5%  
5%  
Q51  
Q101  
8-729-921-25 TRANSISTOR FMC2 (C5960R/C5970R)  
8-729-920-21 TRANSISTOR DTC314TKH04  
(C5960R/C5970R)  
Q102  
8-729-920-21 TRANSISTOR DTC314TKH04  
(C5960R/C5970R)  
8-729-921-25 TRANSISTOR FMC2 (C5960R/C5970R)  
8-729-903-95 TRANSISTOR 2SB1188-T101-Q  
R22  
R24  
R25  
1-216-057-00 METAL CHIP  
1-216-049-11 RES,CHIP  
1-216-097-00 RES,CHIP  
2.2K  
1K  
100K  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
(C5970)  
1/10W  
(C5970)  
1/10W  
(C5970)  
Q103  
Q250  
R26  
R27  
1-216-089-00 RES,CHIP  
1-216-049-11 RES,CHIP  
47K  
1K  
5%  
5%  
Q251  
Q254  
Q255  
Q300  
8-729-900-53 TRANSISTOR DTC114EK  
8-729-807-12 TRANSISTOR 2SD1802-S  
8-729-921-25 TRANSISTOR FMC2  
8-729-920-21 TRANSISTOR DTC314TKH04  
(C5970/C5970R)  
R28  
R29  
R30  
R31  
R32  
1-216-057-00 METAL CHIP  
1-216-057-00 METAL CHIP  
1-216-073-00 METAL CHIP  
1-216-073-00 METAL CHIP  
1-216-097-00 RES,CHIP  
2.2K  
2.2K  
10K  
5%  
1/10W  
Q301  
8-729-920-21 TRANSISTOR DTC314TKH04  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
Q302  
Q303  
Q400  
8-729-920-21 TRANSISTOR DTC314TKH04  
8-729-920-21 TRANSISTOR DTC314TKH04  
8-729-920-21 TRANSISTOR DTC314TKH04  
(C5970/C5970R)  
8-729-920-21 TRANSISTOR DTC314TKH04  
8-729-920-21 TRANSISTOR DTC314TKH04  
10K  
Q401  
Q402  
100K  
Q403  
Q500  
Q600  
Q601  
Q603  
8-729-920-21 TRANSISTOR DTC314TKH04  
8-729-620-06 TRANSISTOR 2SC3052-EF (C5970/C5970R)  
8-729-027-23 TRANSISTOR DTA114EKA-T146  
8-729-900-53 TRANSISTOR DTC114EK  
R33  
R34  
R35  
R36  
R37  
1-216-065-00 RES,CHIP  
1-216-061-00 METAL CHIP  
1-216-025-00 RES,CHIP  
1-216-121-00 RES,CHIP  
1-216-057-00 METAL CHIP  
4.7K  
3.3K  
100  
5%  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
1/10W  
8-729-920-21 TRANSISTOR DTC314TKH04  
Q701  
Q702  
Q703  
Q704  
Q900  
8-729-900-53 TRANSISTOR DTC114EK  
8-729-921-25 TRANSISTOR FMC2  
8-729-921-25 TRANSISTOR FMC2  
8-729-026-49 TRANSISTOR 2SA1037AK-T146-R  
8-729-620-06 TRANSISTOR 2SC3052-EF  
1M  
2.2K  
Q901  
Q903  
Q904  
Q905  
Q906  
8-729-907-46 TRANSISTOR IMZ1  
R39  
R40  
R41  
R42  
R45  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-041-00 METAL CHIP  
1-216-025-00 RES,CHIP  
1-216-295-00 SHORT  
100  
100  
470  
100  
0
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
8-729-026-68 TRANSISTOR 2SD2525 (TP)  
8-729-026-68 TRANSISTOR 2SD2525 (TP)  
8-729-924-73 TRANSISTOR FMA9  
8-729-921-25 TRANSISTOR FMC2  
< RESISTOR >  
R50  
R51  
R52  
R53  
R55  
1-216-065-00 RES,CHIP  
1-216-113-00 METAL CHIP  
1-216-049-11 RES,CHIP  
1-216-077-00 METAL CHIP  
1-216-041-00 METAL CHIP  
4.7K  
470K  
1K  
5%  
1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
R1  
R1  
1-216-025-00 RES,CHIP  
1-216-049-11 RES,CHIP  
100  
1K  
5%  
1/10W  
(C5960R/C5970R)  
5%  
1/10W  
(C5970)  
1/10W  
1/10W  
(C5970)  
1/10W  
R2  
R3  
1-216-025-00 RES,CHIP  
1-216-073-11 METAL CHIP  
100  
10K  
5%  
5%  
15K  
470  
R3  
1-216-069-11 METAL CHIP  
6.8K  
5%  
(C5960R/C5970R)  
– 81 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAIN  
Ref. No.  
R56  
Part No.  
Description  
Remark  
1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
0 (C5960R/C5970R)  
Ref. No.  
R414  
Part No.  
Description  
Remark  
1/10W  
1-216-025-00 RES,CHIP  
100  
100  
5%  
1-216-075-00 METAL CHIP  
12K  
5%  
R57  
1-216-025-00 RES,CHIP  
R500  
R501  
R502  
R503  
1-216-049-11 RES,CHIP  
1-216-057-00 METAL CHIP  
1-216-073-00 METAL CHIP  
1-216-073-00 METAL CHIP  
1K  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
2.2K  
10K  
10K  
R59  
R62  
1-216-295-00 SHORT  
1-216-057-00 METAL CHIP  
2.2K  
5%  
1/10W  
(C5960R/C5970R)  
(C5970/C5970R)  
5% 1/10W  
(C5970/C5970R)  
R64  
1-216-295-00 SHORT  
0
R504  
1-216-073-00 METAL CHIP  
10K  
R65  
R66  
1-216-295-00 SHORT  
1-216-065-00 RES,CHIP  
0 (C5960R/C5970R)  
4.7K  
5%  
1/10W  
R505  
R506  
R600  
R601  
R602  
1-216-085-00 METAL CHIP  
1-216-073-00 METAL CHIP  
1-216-025-00 RES,CHIP  
1-216-073-00 METAL CHIP  
1-216-097-00 RES,CHIP  
33K  
10K  
100  
10K  
100K  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
(C5960R/C5970R)  
R72  
R80  
1-216-295-00 SHORT  
1-216-001-00 METAL CHIP  
0
10  
5%  
1/10W  
(C5960R/C5970R)  
R103  
1-216-061-11 METAL CHIP  
3.3K  
5%  
5%  
1/10W  
(C5970)  
R603  
R700  
R701  
R702  
R703  
1-216-150-00 RES,CHIP  
1-216-073-00 METAL CHIP  
1-216-089-00 RES,CHIP  
1-216-101-00 METAL CHIP  
1-216-049-11 RES,CHIP  
10  
5%  
5%  
5%  
5%  
5%  
1/8W  
10K  
47K  
150K  
1K  
1/10W  
1/10W  
1/10W  
1/10W  
R103  
R104  
R104  
R105  
R105  
1-216-063-11 RES,CHIP  
1-216-081-00 METAL CHIP  
1-216-085-00 METAL CHIP  
1-216-081-00 METAL CHIP  
1-216-085-00 METAL CHIP  
3.9K  
22K  
33K  
22K  
33K  
1/10W  
(C5960R/C5970R)  
5% 1/10W  
(C5960R/C5970R)  
5%  
1/10W  
(C5970)  
1/10W  
R704  
R705  
R709  
R710  
R711  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-089-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-295-00 SHORT  
100  
100  
47K  
100  
0
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
5%  
(C5960R/C5970R)  
5%  
1/10W  
(C5970)  
R712  
R713  
R717  
R719  
R720  
1-216-037-00 METAL CHIP  
1-216-097-00 RES,CHIP  
1-216-081-00 METAL CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
330  
100K  
22K  
100  
100  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
R106  
R106  
1-216-061-00 METAL CHIP  
1-216-063-11 RES,CHIP  
3.3K  
3.9K  
5%  
5%  
1/10W  
(C5970)  
1/10W  
(C5960R/C5970R)  
R201  
R202  
R250  
1-216-049-11 RES,CHIP  
1-216-049-11 RES,CHIP  
1-219-986-11 RES,CHIP  
1K  
1K  
0.2  
5%  
5%  
1%  
1/10W  
1/10W  
1/4W  
R721  
R726  
R727  
R730  
R731  
1-216-049-11 RES,CHIP  
1-216-049-11 RES,CHIP  
1-216-049-11 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1K  
1K  
1K  
100  
100  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
R255  
R256  
R257  
R259  
R260  
1-216-663-11 METAL CHIP  
1-216-057-00 METAL CHIP  
1-216-073-00 METAL CHIP  
1-216-190-00 RES,CHIP  
1-216-675-11 METAL CHIP  
3.3K  
2.2K  
10K  
470  
0.5% 1/10W  
5%  
5%  
5%  
1/10W  
1/10W  
1/8W  
R732  
R734  
R738  
R741  
R745  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
100  
100  
100  
100  
100  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
10K  
0.5% 1/10W  
R304  
R305  
R306  
1-216-033-00 METAL CHIP  
1-216-081-00 METAL CHIP  
1-216-081-00 METAL CHIP  
220  
22K  
22K  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
(C5970/C5970R)  
5% 1/10W  
(C5970/C5970R)  
R748  
R749  
R751  
R754  
R759  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
100  
100  
100  
100  
100  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
R307  
R308  
1-216-033-00 METAL CHIP  
1-216-065-00 RES,CHIP  
220  
4.7K  
5%  
1/10W  
R309  
R310  
R311  
R312  
R313  
1-216-065-00 RES,CHIP  
1-216-089-00 RES,CHIP  
1-216-089-00 RES,CHIP  
1-216-075-00 METAL CHIP  
1-216-069-11 RES,CHIP  
4.7K  
47K  
47K  
12K  
6.8K  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
R760  
R763  
R764  
R771  
R772  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-097-00 RES,CHIP  
1-216-057-00 METAL CHIP  
100  
100  
100  
100K  
2.2K  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
R405  
R406  
R407  
1-216-033-00 METAL CHIP  
1-216-081-00 METAL CHIP  
1-216-081-00 METAL CHIP  
220  
22K  
22K  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
R773  
R774  
R777  
R780  
1-216-057-00 METAL CHIP  
1-216-097-00 RES,CHIP  
1-216-097-00 RES,CHIP  
1-216-097-00 RES,CHIP  
2.2K  
100K  
100K  
100K  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
(C5970/C5970R)  
5% 1/10W  
(C5970/C5970R)  
R408  
R409  
1-216-033-00 METAL CHIP  
1-216-065-00 RES,CHIP  
220  
(C5970/C5970R: AEP, UK)  
100K 5% 1/10W  
(C5960R/C5970R: German)  
4.7K  
5%  
1/10W  
R781  
R782  
1-216-097-00 RES,CHIP  
1-216-097-00 RES,CHIP  
R410  
R411  
R412  
R413  
1-216-065-00 RES,CHIP  
1-216-089-00 RES,CHIP  
1-216-089-00 RES,CHIP  
1-216-069-11 RES,CHIP  
4.7K  
47K  
47K  
6.8K  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
100K  
5%  
1/10W  
(C5970: US, Canadian)  
Download from Www.Som–anu8a2ls.c–om. All Manuals Search And Download.  
MAIN SENSOR SERVO  
Ref. No.  
R783  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
< TUNER >  
Remark  
1-216-097-00 RES,CHIP  
100K  
5%  
1/10W  
(C5970: E)  
1/10W  
1/10W  
1/10W  
R800  
R801  
R897  
1-216-113-00 METAL CHIP  
1-216-097-00 RES,CHIP  
1-216-001-00 METAL CHIP  
470K  
100K  
10  
5%  
5%  
5%  
TU1  
TU1  
A-3320-693-A TUNER UNIT TUX-011(E) (FM/AM) (C5970)  
1-693-440-11 TUNER UNIT FAE342-E01 (FM/MW/LW)  
(C5960R/C5970R)  
(C5960R/C5970R)  
< VIBRATOR >  
R900  
R901  
R902  
R903  
R904  
1-216-222-00 RES,CHIP  
1-216-089-00 RES,CHIP  
1-216-089-00 RES,CHIP  
1-216-675-11 METAL CHIP  
1-216-675-11 METAL CHIP  
10K  
47K  
47K  
10K  
10K  
5%  
5%  
5%  
1/8W  
1/10W  
1/10W  
X1  
X2  
1-781-258-11 VIBRATOR, CRYSTAL (10.25MHz)  
1-579-242-11 VIBRATOR, CRYSTAL (4.332MHz)  
(C5960R/C5970R)  
1-767-833-21 VIBRATOR, CERAMIC (3.68MHz)  
1-579-886-21 VIBRATOR, CRYSTAL (32.768kHz)  
0.5% 1/10W  
0.5% 1/10W  
X700  
X701  
R905  
R906  
R907  
R908  
R909  
1-216-073-00 METAL CHIP  
1-216-067-00 METAL CHIP  
1-216-037-00 METAL CHIP  
1-216-037-00 METAL CHIP  
1-216-298-00 METAL CHIP  
10K  
5.6K  
330  
330  
2.2  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
************************************************************  
A-3317-457-A SENSOR BOARD, COMPLETE  
************************  
For the parts on the SENSOR board, replace the entire mounted board.  
R910  
R911  
R912  
R913  
R914  
1-216-298-00 METAL CHIP  
1-216-298-00 METAL CHIP  
1-216-298-00 METAL CHIP  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
2.2  
2.2  
2.2  
100  
100  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
************************************************************  
*
A-3317-459-A SERVO BOARD, COMPLETE  
**********************  
< CAPACITOR >  
R915  
R916  
R917  
R918  
R919  
1-216-025-00 RES,CHIP  
1-216-097-00 RES,CHIP  
1-216-097-00 RES,CHIP  
1-216-675-11 METAL CHIP  
1-216-675-11 METAL CHIP  
100  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
100K  
100K  
10K  
C101  
C102  
C103  
C104  
C105  
1-104-543-11 FILM CHIP  
1-135-259-11 TANTAL. CHIP  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
0.0022uF 5%  
50V  
6.3V  
25V  
16V  
16V  
10uF  
20%  
10%  
10%  
10%  
0.5% 1/10W  
0.5% 1/10W  
10K  
R920  
R921  
R930  
R981  
R989  
1-216-025-00 RES,CHIP  
1-216-025-00 RES,CHIP  
1-216-073-00 METAL CHIP  
1-216-121-00 RES,CHIP  
1-216-097-00 RES,CHIP  
100  
100  
10K  
1M  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1/10W  
1/10W  
C106  
C107  
C108  
C109  
C201  
1-135-181-21 TANTALUM CHIP 4.7uF  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-135-181-21 TANTALUM CHIP 4.7uF  
20%  
10%  
10%  
20%  
6.3V  
25V  
25V  
6.3V  
50V  
100K  
1-104-543-11 FILM CHIP  
0.0022uF 5%  
R990  
1-216-198-00 RES,CHIP  
1K  
5%  
1/8W  
(C5960R/C5970R)  
C202  
C301  
C302  
C304  
C305  
1-135-259-11 TANTAL. CHIP  
10uF  
20%  
10%  
10%  
5%  
6.3V  
16V  
16V  
50V  
25V  
R991  
R992  
R993  
1-216-081-00 METAL CHIP  
1-216-081-00 METAL CHIP  
1-216-097-00 RES,CHIP  
22K  
22K  
100K  
5%  
5%  
5%  
1/10W  
1/10W  
1/10W  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-162-927-11 CERAMIC CHIP 100PF  
1-162-970-11 CERAMIC CHIP 0.01uF  
(C5970/C5970R)  
10%  
R994  
1-216-097-00 RES,CHIP  
100K  
5%  
1/10W  
C306  
C307  
C308  
C309  
C310  
1-107-823-11 CERAMIC CHIP 0.47uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-162-927-11 CERAMIC CHIP 100PF  
1-162-968-11 CERAMIC CHIP 0.0047uF 10%  
1-107-823-11 CERAMIC CHIP 0.47uF 10%  
10%  
10%  
5%  
16V  
16V  
50V  
50V  
16V  
R995  
R996  
1-216-057-00 METAL CHIP  
1-216-097-00 RES,CHIP  
2.2K  
100K  
5%  
5%  
1/10W  
1/10W  
< CONPOSITION CIRCUIT BLOCK >  
RB900 1-233-412-11 RES, CHIP NETWORK 1K (3216)  
RB901 1-233-412-11 RES, CHIP NETWORK 1K (3216)  
RB902 1-233-576-11 RES, CHIP NETWORK 100  
RB903 1-233-576-11 RES, CHIP NETWORK 100  
C311  
C314  
C315  
C316  
C317  
1-164-245-11 CERAMIC CHIP 0.015uF 10%  
25V  
16V  
10V  
16V  
16V  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-109-982-11 CERAMIC CHIP 1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10%  
< VARIABLE RESISTOR >  
C318  
C319  
C320  
C321  
C322  
1-104-852-11 TANTAL. CHIP  
1-104-852-11 TANTAL. CHIP  
1-164-227-11 CERAMIC CHIP 0.022uF 10%  
1-162-969-11 CERAMIC CHIP 0.0068uF 10%  
1-162-964-11 CERAMIC CHIP 0.001uF 10%  
22uF  
22uF  
20%  
20%  
6.3V  
6.3V  
25V  
25V  
50V  
RV1  
1-223-589-11 RES, ADJ, CARBON 100K (C5960R/C5970R)  
< SWITCH >  
S701  
S900  
1-572-552-21 SWITCH, SLIDE (FREQUENCY SELECT)  
(C5970: E)  
C324  
C325  
C326  
C327  
C328  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-110-563-11 CERAMIC CHIP 0.068uF 10%  
1-162-968-11 CERAMIC CHIP 0.0047uF 10%  
1-109-982-11 CERAMIC CHIP 1uF  
1-162-966-11 CERAMIC CHIP 0.0022uF 10%  
10%  
16V  
16V  
50V  
10V  
50V  
1-692-431-21 SWITCH, TACTILE (RESET)  
< THERMISTOR >  
10%  
TH600 1-801-792-21 THERMISTOR, POSITIVE  
C329  
1-164-227-11 CERAMIC CHIP 0.022uF 10%  
25V  
– 83 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVO  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
< IC >  
Remark  
C330  
C331  
C333  
C334  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-164-004-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10%  
25V  
16V  
16V  
25V  
IC101 8-759-571-84 IC PCM1718E/2K  
IC301 8-752-384-47 IC CXD2652AR  
IC302 8-752-074-77 IC CXA2523R  
IC303 8-759-430-25 IC BH6511FS-E2  
IC304 8-759-096-87 IC TC7WU04FU (TE12R)  
C335  
C336  
C337  
C338  
C339  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-164-004-11 CERAMIC CHIP 0.1uF  
1-162-970-11 CERAMIC CHIP 0.01uF  
10%  
10%  
10%  
10%  
10%  
25V  
25V  
25V  
25V  
25V  
IC305 8-759-040-83 IC BA6287F  
IC306 8-759-058-62 IC TC7S08FU (TE85R)  
IC307 8-759-368-16 IC MN41V4400TT-08S  
IC401 8-759-909-71 IC BA4558F  
C340  
C341  
C342  
C343  
C344  
1-162-918-11 CERAMIC CHIP 18PF  
1-162-918-11 CERAMIC CHIP 18PF  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-162-970-11 CERAMIC CHIP 0.01uF  
5%  
5%  
10%  
10%  
20%  
50V  
50V  
25V  
25V  
6.3V  
IC501 8-752-898-83 IC CXP84340-201Q  
IC502 8-759-238-47 IC TC74HCT7007AF (EL)  
IC503 8-759-238-47 IC TC74HCT7007AF (EL)  
1-104-852-11 TANTAL. CHIP  
22uF  
C345  
C346  
C347  
C348  
C349  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-104-852-11 TANTAL. CHIP 22uF  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
10%  
20%  
10%  
10%  
10%  
25V  
6.3V  
25V  
16V  
16V  
< COIL >  
L101  
L102  
L301  
L302  
L303  
1-412-058-11 INDUCTOR CHIP 10uH  
1-412-058-11 INDUCTOR CHIP 10uH  
1-412-058-11 INDUCTOR CHIP 10uH  
1-412-058-11 INDUCTOR CHIP 10uH  
1-412-039-51 INDUCTOR CHIP 100uH  
C350  
C351  
C352  
C353  
C356  
1-107-826-11 CERAMIC CHIP 0.1uF  
10%  
20%  
10%  
10%  
5%  
16V  
10V  
16V  
16V  
50V  
1-104-852-11 TANTAL. CHIP  
22uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-162-927-11 CERAMIC CHIP 100PF  
L304  
L305  
L306  
L501  
1-412-039-51 INDUCTOR CHIP 100uH  
1-412-039-51 INDUCTOR CHIP 100uH  
1-412-039-51 INDUCTOR CHIP 100uH  
1-412-058-11 INDUCTOR CHIP 10uH  
C357  
C358  
C359  
C361  
C362  
1-162-927-11 CERAMIC CHIP 100PF  
1-162-927-11 CERAMIC CHIP 100PF  
1-162-923-11 CERAMIC CHIP 47PF  
5%  
5%  
5%  
20%  
10%  
50V  
50V  
50V  
6.3V  
16V  
< TRANSISTOR >  
1-135-259-11 TANTAL. CHIP  
10uF  
Q301  
Q302  
Q401  
Q402  
Q403  
8-729-230-49 TRANSISTOR 2SC2712-YG  
8-729-026-49 TRANSISTOR 2SA1037AK-T146-R  
8-729-920-85 TRANSISTOR 2SD1664-QR  
8-729-106-60 TRANSISTOR 2SB1115A  
8-729-421-22 TRANSISTOR UN2211  
1-107-826-11 CERAMIC CHIP 0.1uF  
C402  
C403  
C501  
C503  
C504  
1-162-970-11 CERAMIC CHIP 0.01uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-162-927-11 CERAMIC CHIP 100PF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
10%  
10%  
5%  
10%  
10%  
25V  
16V  
50V  
16V  
16V  
< RESISTOR >  
R101  
R102  
R104  
R201  
R202  
1-216-073-00 METAL CHIP  
1-216-833-11 METAL CHIP  
1-216-049-11 RES,CHIP  
1-216-073-00 METAL CHIP  
1-216-049-11 RES,CHIP  
10K  
10K  
1K  
10K  
1K  
5%  
5%  
5%  
5%  
5%  
1/10W  
1/16W  
1/10W  
1/10W  
1/10W  
C505  
C506  
C510  
C511  
C512  
1-107-826-11 CERAMIC CHIP 0.1uF  
10%  
20%  
10%  
10%  
10%  
16V  
10V  
10V  
16V  
16V  
1-104-852-11 TANTAL. CHIP  
22uF  
1-115-467-11 CERAMIC CHIP 0.22uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
R301  
R302  
R303  
R304  
R305  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
100  
100  
100  
100  
100  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
C513  
C514  
C515  
C516  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-115-467-11 CERAMIC CHIP 0.22uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
1-107-826-11 CERAMIC CHIP 0.1uF  
10%  
10%  
10%  
10%  
16V  
10V  
16V  
16V  
< CONNECTOR >  
R306  
R307  
R308  
R311  
R312  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-821-11 METAL CHIP  
1-216-825-11 METAL CHIP  
100  
100  
100  
1K  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
CN101 1-779-389-21 HOUSING,CONNECTOR (PC BOARD) 30P  
CN102 1-573-929-11 CONNECTOR, FFC/FPC (ZIF) 20P  
CN103 1-764-439-21 CONNECTOR, FPC 11P  
2.2K  
< DIODE >  
R316  
R317  
R318  
R319  
R320  
1-216-821-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-833-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-855-11 METAL CHIP  
1K  
100  
10K  
100K  
680K  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
D401  
D501  
8-719-157-93 DIODE RD3.0SB2  
8-719-988-61 DIODE 1SS355TE-17  
< FERRITE BEAD >  
R324  
R325  
R327  
R328  
R329  
1-216-827-11 METAL CHIP  
1-216-821-11 METAL CHIP  
1-216-821-11 METAL CHIP  
1-216-811-11 METAL CHIP  
1-216-819-11 METAL CHIP  
3.3K  
1K  
1K  
150  
680  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
FB301 1-414-235-11 INDUCTOR CHIP 0uH  
FB302 1-414-760-21 INDUCTOR CHIP 0uH  
Download from Www.Som–anu8a4ls.c–om. All Manuals Search And Download.  
SERVO  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
R330  
R331  
R332  
R333  
R334  
1-216-853-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-819-11 METAL CHIP  
1-216-809-11 METAL CHIP  
470K  
100  
100  
680  
100  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
R530  
R531  
1-216-825-11 METAL CHIP  
1-216-845-11 METAL CHIP  
2.2K  
100K  
5%  
5%  
1/16W  
1/16W  
R532  
R533  
R534  
R535  
R536  
1-216-864-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-864-11 METAL CHIP  
0
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
100K  
100K  
100K  
0
R335  
R336  
R337  
R338  
R339  
1-216-815-11 METAL CHIP  
1-216-853-11 METAL CHIP  
1-216-853-11 METAL CHIP  
1-216-833-11 METAL CHIP  
1-216-827-11 METAL CHIP  
330  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
470K  
470K  
10K  
R537  
R538  
R539  
R540  
R542  
1-216-809-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-845-11 METAL CHIP  
100  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
3.3K  
100K  
100K  
100K  
100K  
R340  
R341  
R342  
R343  
R344  
1-216-843-11 METAL CHIP  
1-216-837-11 METAL CHIP  
1-216-833-11 METAL CHIP  
1-216-827-11 METAL CHIP  
1-216-833-11 METAL CHIP  
68K  
22K  
10K  
3.3K  
10K  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
R545  
1-216-864-11 METAL CHIP  
0
5%  
1/16W  
< CONPOSITION CIRCUIT BLOCK >  
RB301 1-233-576-11 RES, CHIP NETWORK 100  
RB302 1-233-576-11 RES, CHIP NETWORK 100  
RB503 1-233-412-11 RES, CHIP NETWORK 1K (3216)  
R345  
R346  
R347  
R348  
R349  
1-216-827-11 METAL CHIP  
1-216-841-11 METAL CHIP  
1-216-833-11 METAL CHIP  
1-218-708-11 METAL CHIP  
1-216-025-00 RES,CHIP  
3.3K  
47K  
10K  
4.7K  
100  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
0.5% 1/16W  
5%  
1/10W  
< THERMISTOR >  
TH501 1-810-421-11 THERMISTOR NTH5G36B103K01TE  
< VIBRATOR >  
R350  
R351  
R352  
R353  
R354  
1-216-142-00 RES,CHIP  
1-218-700-11 METAL CHIP  
1-218-700-11 METAL CHIP  
1-218-700-11 METAL CHIP  
1-216-857-11 METAL CHIP  
4.7  
5%  
1/8W  
2.2K  
2.2K  
2.2K  
1M  
0.5% 1/16W  
0.5% 1/16W  
0.5% 1/16W  
5%  
1/16W  
X301  
X501  
1-767-429-21 VIBRATOR, CRYSTAL (22.5792MHz)  
1-760-365-11 VIBRATOR, CERAMIC (10MHz)  
R355  
R356  
R357  
R401  
R402  
1-216-833-11 METAL CHIP  
1-216-833-11 METAL CHIP  
1-216-017-00 RES,CHIP  
1-216-073-00 METAL CHIP  
1-216-065-00 RES,CHIP  
10K  
10K  
47  
10K  
4.7K  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/10W  
1/10W  
1/10W  
************************************************************  
MISCELLANEOUS  
**************  
R403  
R404  
R405  
R406  
R501  
1-216-065-00 RES,CHIP  
1-216-809-11 METAL CHIP  
1-218-692-11 METAL CHIP  
1-218-714-11 METAL CHIP  
1-216-821-11 METAL CHIP  
4.7K  
100  
1K  
8.2K  
1K  
5%  
5%  
1/10W  
1/16W  
16  
16  
1-776-207-72 CORD (WITH CONNECTOR) (POWER) (C5970)  
1-776-527-71 CORD (WITH CONNECTOR) (ISO) (POWER)  
(C5960R/MDX-C5970R)  
1-654-693-11 SENSOR FLEXIBLE BOARD  
8-583-046-05 OPTICAL PICK-UP KMS-241B/J1RP  
0.5% 1/16W  
0.5% 1/16W  
5%  
153  
!165  
1/16W  
LCD801 1-803-502-21 DISPLAY PANEL, LIQUID CRYSTAL  
R502  
R503  
R504  
R505  
R506  
1-216-821-11 METAL CHIP  
1-216-821-11 METAL CHIP  
1-216-821-11 METAL CHIP  
1-216-821-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1K  
1K  
1K  
1K  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
M901  
M902  
M903  
A-3301-407-A MOTOR ASSY, SP (SPINDLE)  
A-3291-190-A MOTOR ASSY, SL (SLED)  
A-3291-191-A MOTOR ASSY, LO (LOADING)  
100K  
************************************************************  
R507  
R510  
R511  
R512  
R516  
1-218-708-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-847-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-809-11 METAL CHIP  
4.7K  
100K  
150K  
100K  
100  
0.5% 1/16W  
**************  
HARDWARE LIST  
**************  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
#1  
#2  
#3  
#4  
#5  
7-621-772-10 SCREW +B 2X4  
7-685-792-09 SCREW +PTT 2.6X6 (S)  
7-685-794-09 SCREW +PTT 2.6X10 (S)  
7-685-106-19 SCREW +P 2X10 TYPE2 NON-SLIT  
7-685-851-04 SCREW +BVTT 2X4 (S)  
R517  
R518  
R519  
R520  
R521  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
1-216-809-11 METAL CHIP  
100  
100  
100  
100  
100  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
#6  
#7  
#8  
#9  
7-624-102-04 STOP RING 1.5, TYPE-E  
7-627-852-37 PRECISION SCREW +P 1.7X1.8 TYPE3  
7-621-772-08 SCREW +B 2X3  
R522  
R523  
R524  
R525  
R526  
1-216-821-11 METAL CHIP  
1-216-821-11 METAL CHIP  
1-216-821-11 METAL CHIP  
1-216-845-11 METAL CHIP  
1-216-825-11 METAL CHIP  
1K  
1K  
1K  
100K  
2.2K  
5%  
5%  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
1/16W  
1/16W  
7-621-555-10 SCREW +K 2X3  
************************************************************  
R527  
R528  
R529  
1-216-825-11 METAL CHIP  
1-216-825-11 METAL CHIP  
1-216-825-11 METAL CHIP  
2.2K  
2.2K  
2.2K  
5%  
5%  
5%  
1/16W  
1/16W  
1/16W  
The components identified by Les composants identifiés par une  
mark ! or dotted line with marque ! sont critiques pour la  
mark ! are critical for safety. sécurité.  
Replace only with part num- Ne les remplacer que par une pièce  
ber specified.  
portant le numéro spécifié.  
– 85 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MDX-C5960R/C5970/C5970R  
Ref. No.  
Part No.  
Description  
Remark  
Ref. No.  
Part No.  
Description  
Remark  
ACCESSORIES & PACKING MATERIALS  
PARTS FOR INSTALLATION AND CONNECTION  
*******************************  
*************************************  
3-865-831-11 MANUAL, INSTRUCTION  
501  
502  
503  
3-009-613-21 FRAME  
3-932-910-11 COLLAR (CDX)  
X-3370-076-1 SCREW ASSY (U. KEY), FITTING  
(C5970: US, Canadian)  
3-934-325-01 SCREW, +K (5X8) TAPPING (C5970)  
(ENGLISH) (C5970: US, Canadian)  
3-865-831-21 MANUAL, INSTRUCTION  
(FRENCH) (C5970: Canadian)  
3-865-831-31 MANUAL, INSTRUCTION  
(ENGLISH, SPANISH, CHINESE) (C5970: E)  
3-865-832-11 MANUAL, INSTRUCTION, INSTALL  
(ENGLISH, FRENCH) (C5970: US, Canadian)  
3-865-832-21 MANUAL, INSTRUCTION, INSTALL  
504  
505  
3-924-961-01 SUPPORT (ND), FITTING (C5970)  
506  
507  
1-776-207-72 CORD (WITH CONNECTOR) (POWER) (C5970)  
X-3370-077-1 SCREW ASSY (AE. KEY), FITTING  
(C5960R/C5970: E/C5970R)  
(ENGLISH, SPANISH, CHINESE) (C5970: E)  
508  
509  
510  
1-465-459-21 ADAPTER, ANTENNA (C5960R/C5970R)  
1-775-543-31 CORD, GROUND  
3-344-561-21 SCREW (M4X4)  
3-865-833-11 MANUAL, INSTRUCTION (ENGLISH, SPANISH,  
SWEDISH, PORTUGUESE) (C5970R: AEP, UK)  
3-865-833-21 MANUAL, INSTRUCTION  
(GERMAN, RUSSIAN) (C5970R: German)  
511  
1-776-527-71 CORD (WITH CONNECTOR) (ISO) (POWER)  
(C5960R/C5970R)  
3-865-833-31 MANUAL, INSTRUCTION (FRENCH, GERMAN,  
DUTCH, ITALIAN) (C5960R/C5970R: AEP)  
3-865-834-11 MANUAL, INSTRUCTION, INSTALL  
(ENGLISH, SPANISH, SWEDISH, PORTUGUESE)  
(C5970R: AEP, UK)  
501  
502  
3-865-834-21 MANUAL, INSTRUCTION, INSTALL (FRENCH,  
GERMAN, DUTCH, ITALIAN, RUSSIAN)  
(C5960R/C5970R: AEP, German)  
FRAME  
COLLAR (CDX)  
× 1  
× 1  
X-3373-926-1 CASE ASSY (XR)  
************************************************************  
503  
KEY  
× 1  
+T4 × 12  
+P4 × 6  
× 1  
× 1  
504  
505  
506  
+K5 × 8  
FITTING SUPPORT (ND)  
POWER CORD  
× 4  
× 1  
× 1  
507  
KEY  
FITTING SCREW  
BUSHING  
× 1  
× 1  
× 1  
508  
509  
510  
ANTENNA ADAPTER  
GROUND CORD  
+M4 × 4  
× 1  
× 1  
× 1  
511  
POWER CORD (ISO)  
× 1  
Sony Corporation  
99B0578-1  
Printed in Japan © 1999. 2  
Published by Quality Assurance Dept.  
9-926-428-11  
Personal & Mobile Communication Company  
Download from Www.Som–anu8a6ls.c–om. All Manuals Search And Download.  

Shindaiwa Trimmer 81642 User Manual
Shure Headphones AND SM63LB User Manual
Smooth Fitness Elliptical Trainer CE 80LC User Manual
Sony Camera Accessories MRW62E S1 User Manual
Sony Microscope Magnifier snt v User Manual
Sony MP3 Player CFD E55 User Manual
Sony Security Camera SNP 3350 User Manual
Sub Zero Refrigerator 424G 424FSG User Manual
Swann DVR SW244 UDC User Manual
Tamron Camera Lens 360EM User Manual