CD-MPS660E (A) TINSZA040AWZZ
1
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
CD-MPS660E Mini Component System consisting of CD-MPS660E
(main unit) and CP-MPS660E (speaker system).
MINI COMPONENT SYSTEM
MODEL
CD-MPS660E
OPERATION MANUAL
Accessories
Please confirm that the following accessories are included.
Remote control
1
AM loop aerial
1
FM aerial
1
Note:
Only the above accessories are included.
03/12/19
CD-MPS660E(A)_FR.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
CD-MPS660E
1
" General
! Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
! Please ensure that the equipment is positioned in a well venti-
lated area and ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the equipment.
10 cm (4") 10 cm (4")
10 cm (4")
! Do not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.
10 cm (4")
! Use the unit on a firm, level surface free from
vibration.
! The ventilation should not be impeded by
covering the ventilation openings with
items, such as newspapers, tablecloths,
curtains, etc.
! No naked flame sources, such as lighted candles, should be
placed on the apparatus.
! Attention should be drawn to the environmental aspects of bat-
tery disposal.
! This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
! Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
! Do not place anything on top of the unit.
! Do not expose the unit to moisture, to temperatures higher than
60°C (140°F) or to extremely low temperatures.
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of acci-
dent causing damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage other than that
which is specified.
! If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
! In case of an electrical storm, unplug the
unit for safety.
" Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
3
03/12/19
CD-MPS660E(A)1.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
CD-MPS660E
" Front panel
Reference page
1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Disc Track Up or Fast Forward, Tape 2 Fast Forward,
Tuner Preset Up, Time Up Button . . . . . . . . . . . 13, 16, 25, 27
5. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 13, 30, 33
6. Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
7. Tuning Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8. Disc Track Down or Fast Reverse, Tape 2 Rewind,
13
1
14
15
16
17
18
19
20
21
2
3
Tuner Preset Down, Time Down Button . . . . . . 13, 16, 25, 27
9. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . 12
10. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 26
11. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
12. Game/Video Input Sockets . . . . . . . . . . . . . . . . . . . . . . . . . 34
13. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 15
14. Disc Direct Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
15. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 15
16. Character Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
17. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
18. Disc Play or Repeat, Tape Play Button . . . . . . . . . 15, 18, 26
19. Memory/Set Button . . . . . . . . . . . . . . . . 13, 19, 23, 25, 30, 33
20. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . 28, 29
21. MP3 Disc Navigation Mode Select Button . . . . . . . . . . . . . 21
22. Disc or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . 16, 27
23. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
24. Extra Bass/Demo Mode Button . . . . . . . . . . . . . . . . . . . 10, 12
25. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
26. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 26
27. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
28. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
29. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
30. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4
5
6
7
22
23
24
25
26
8
9
10
11
27 28 29 30
12
4
03/12/19
CD-MPS660E(A)1.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E (A) TINSZA040AWZZ
2
CD-MPS660E
1
" Display
Reference page
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. MP3 Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. MP3 Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4. MP3 Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7. Timer Recording Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 31
8. Tape 2 Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
9. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
10. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 24
11. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 24
12. Tape Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
13. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 23
14. MP3 Disc Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
15. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
16. Disc Repeat Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 18
17. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
18. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1
2
3
4 5 6 7 8
9 10 11
14 15 16
12 13
17
18
5
03/12/19
CD-MPS660E(A)1.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
Controls and indicators (continued)
" Rear panel
Reference page
1. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. Video Output Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3
4
5
1
6
2
" Speaker system
1. Tweeter
2. Passive Radiator
3. Woofer
1
2
4. Speaker Wire
3
4
6
03/12/19
CD-MPS660E(A)1.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
1
" Remote control
1
2
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 15
3. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 13, 30, 33
4. Character Input/Disc Direct Search Buttons . . . . . . . . 17, 22
5. MP3 Disc Navigation Mode Select Button . . . . . . . . . . . . . 21
6. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7. Memory/Set Button . . . . . . . . . . . . . . . . 13, 19, 23, 25, 30, 33
8. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . 28, 29
9. Disc Track Down or Fast Reverse, Tape 2 Rewind,
Tuner Preset Down, Time Down Button . . . . . 13, 16, 25, 27
10. Disc or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . 16, 27
11. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
12. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
13. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 12
14. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
15. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
16. Disc Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
17. Character Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
18. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
19. Disc Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . 12, 19
20. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
21. Disc Track Up or Fast Forward, Tape 2 Fast Forward,
15
3
4
16
17
18
5
6
7
8
9
10
11
19
20
21
22
23
24
Tuner Preset Up, Time Up Button . . . . . . . . . . 13, 16, 25, 27
22. Disc Play or Repeat, Tape Play Button . . . . . . . . . 15, 18, 26
23. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
24. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
25. MP3 Disc Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
26. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 12
12
13
14
25
26
7
03/12/19
CD-MPS660E(A)1.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
CD-MPS660E
Make sure to unplug the AC power lead before any connections.
Aerial connection (see page 9)
FM aerial
AM loop aerial
Right speaker
Left speaker
Wall socket
(AC 230 - 240 V, 50 Hz)
Speaker connection (see page 9)
AC power connection (see page 10)
8
03/12/19
CD-MPS660E(A)1.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
! Aerial connection
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Supplied FM aerial:
2
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Red
Black
Caution:
" Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
" Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
" Do not stand or sit on the speakers. You may
be injured.
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Incorrect
Installing the AM loop aerial:
! Placing the speaker system
The left and right speakers have individual shapes. For best perfor-
mance, place the speakers according to the diagram below.
< Assembling >
< Attaching to the wall >
Left speaker
Right speaker
Wall Screws (not supplied)
Note:
The speaker grilles are not removable.
9
03/12/19
CD-MPS660E(A)1.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
System connections (continued)
! AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
! Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration
mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The demonstration mode will be
cancelled and the display will disap-
pear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Wall socket
(AC 230 - 240 V, 50 Hz)
Notes:
Note:
" The unit will start the tape initialisation when plugged in to the AC
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
! External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Cooling fan:
This product is equipped with a cooling fan inside, which begins to
run at a specified volume level for better heat radiation.
External FM aerial
10
03/12/19
CD-MPS660E(A)1.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
CD-MPS660E
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
" Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
! Battery installation
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
2
" Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
" Keep the remote control away from moisture, heat, shock, and
vibrations.
1
2
Open the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Close the battery cover.
3
! Test of the remote control
Check the remote control after checking all the connections (see
pages 8 - 10).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Remote sensor
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
0.2 m - 6 m
(8" - 20')
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunc-
tion.
11
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
CD-MPS660E
! Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned anti-clockwise, the vol-
ume will decrease.
.....
0
30 MAXIMUM
Remote control operation:
Press the VOLUME (+ or -) button to in-
crease or decrease the volume.
! Bass control (X-BASS)
When the power is first turned on, the
unit will enter the extra bass mode which
emphasises the bass frequencies, and
"X-BASS" will appear. To cancel the ex-
tra bass mode, press the X-BASS/DEMO
(X-BASS) button.
! Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
In CD/TUNER/TAPE mode
In GAME/VIDEO mode
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
The sound is not
modified.
The sound is not
modified.
FLAT
FLAT
Bass and treble are
emphasised.
Bass and treble
are emphasised.
ROCK
ROCK
After use:
Treble is cut a
little.
Bass is empha-
sised.
Vocals and treble
are emphasised.
Bass and treble are
emphasised more.
Press the ON/STAND-BY button to enter the power stand-by
mode.
Treble is cut a little.
CLASSIC
POPS
CLASSIC
ACTION
SPORTS
RACING
Bass and treble are
slightly emphasised.
Vocals (midrange
tones) are emphasised.
Treble is slightly
emphasised.
! Illumination light control
When the power is turned on, light illuminates around the display.
To turn on/off the light, hold down the CLEAR/DIMMER button on
the remote control for 2 seconds or more.
VOCAL
JAZZ
12
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E (A) TINSZA040AWZZ
3
Setting the clock
CD-MPS660E
5 Press the
or
button to adjust the hour and
then press the MEMORY/SET button.
3
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
6 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
In this example, the clock is set for the 24-hour (0:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to se-
The time display will appear for about 10 seconds.
lect "CLOCK", and press the MEMORY/SET button.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the time.
The time display will appear for about 10 seconds.
Note:
4 Press the
or
button to select 24-hour or 12-
The "CLOCK" will appear or time will flash to confirm the time dis-
play when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
hour display and then press the MEMORY/SET button.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour dis-
play) will be skipped.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
To change the 24-hour or 12-hour display:
"AM 12:00"
"AM 0:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 36 for details.]
Perform "Setting the clock" from step 1.
2
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
Note:
The clock can also be set with the remote control.
13
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3 disc
CD-MPS660E
This system can also play audio CD-R and CD-RW discs, but can-
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the equipment used for recording.
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
Notes:
" "
" indicator will light up after the unit reads information on an
MP3 disc.
" This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
" During VBR file playback, time counter in the display may differ
from its actual playback time.
Auto power on function:
When you press any of the following buttons, the unit turns on.
" CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
"
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
14
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
" Playback will begin from track 1 on the disc 1. After that disc fin-
ishes playing, the next disc will automatically play.
" After the last track on the fifth disc is played, the unit will stop
automatically.
" When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4
4 Place the disc on the disc tray 1, label side up.
To exchange other discs whilst playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
Be sure to place 8 cm (3") disc in the middle of the disc trays.
12 cm (5") 8 cm (3")
To remove the discs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
Caution:
5 Press the OPEN/CLOSE button to close the disc tray 1.
" Do not place two discs in one disc tray.
" Do not play discs with special shapes (heart- or octagon-shaped)
as it may cause malfunctions.
[CD]
[MP3]
MP3 disc indicator
" Do not push the disc tray whilst it is moving.
" If the power fails whilst the tray is open, wait until the power is
restored.
" If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
" If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
Total number of
tracks on the disc time of the disc of folders
whose number
is flashing
Total playing
Total number Total number
of files
whose number
is flashing
" Due to the structure of its disc information, it takes longer to
read an MP3 disc than a normal CD (approximately 20 to 90
seconds).
" If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
6 You can place discs on the trays 2 - 5 by following steps 3
- 5.
7 Press the
/
button to start playback.
Disc play indicator
15
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
Listening to a CD or MP3 disc (continued)
Notes:
! Various disc functions
" Track up/track down is possible only within individual discs.
" The sound is heard during fast forward/fast reverse with a CD,
but not with an MP3 disc. For fast forward or fast reverse of an
MP3 disc, refer to playback time on the display.
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
Notes for CD:
" Fast forward/fast reverse is possible only within individual discs.
" When the end of the last track is reached during fast forward, "
END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
Stop
Press in the playback
mode.
(
: Last track number)
Pause
Press in the playback
Notes for MP3 discs:
mode. Press the
/
button to resume play-
back from the paused
point.
Press in the playback
or stop mode.
" Fast forward/fast reverse is possible only within individual tracks.
" When the end of the track is reached during fast forward, the next
track will be played. Playback of the track will begin when its
beginning is reached during fast reverse.
Track up/
Track down
If you press the button
in the stop mode,
! To change the display (MP3 discs only)
Whilst a disc is playing, press the MP3 DIS-
PLAY button.
Each time the button is pressed, the display
will change as follows.
press the
/
button
to start the desired
track.
Fast for-
ward/Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
Track number
Elapsed
playback time
Folder name
File name
16
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3 disc playback
CD-MPS660E
! To specify a disc to play
! Direct track search
You can play a disc by specifying the disc number.
By using the direct search buttons, the desired tracks on the current
disc can be played.
1 Press one of the 1 - 5 buttons to select the desired disc.
Use the direct search buttons on
the remote control to select the de-
sired track whilst playing the se-
lected disc.
4
Selected track number
Selected disc number
" The direct search buttons allow you to select up to number 9.
2 Within 5 seconds, press the DIRECT PLAY button on the
" When selecting number 10 or higher, use the "+10" button.
main unit.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
If the direct search buttons are pressed whilst the disc is stopped,
" Playback will begin from track 1 on the chosen disc.
" After the last track on the chosen disc is played, the unit stops
automatically.
press the
/
button to start the desired track on the current disc.
Notes:
" A track number higher than the number of tracks on the disc can-
not be selected.
" During random play, direct search is not possible.
Note:
If a disc tray with no disc is selected, playback will not start and the
disc indicator will go out.
To stop playback:
Press the button.
17
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
Advanced CD or MP3 disc playback (continued)
! Repeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, or a
programmed sequence continuously.
! Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
To repeat all tracks on up to 5 discs:
Press the RANDOM button on the remote control.
Press the
/
button twice.
To repeat desired tracks:
Perform steps 1 - 6 in "Programmed play" section on page 19 and
then press the
/
button twice.
To cancel random play:
Press the
/
button.
"R" will go out.
To random play all tracks on the chosen disc:
1 Press one of the 1 - 5 but-
tons.
To cancel repeat play:
Press the button again.
" will go out.
/
"
2 Within 5 seconds, press the DI-
RECT PLAY button.
To repeat all tracks on the chosen disc:
3 Press the RANDOM button on
the remote control.
1 Press one of the 1 - 5 buttons.
2 Within 5 seconds, press the DIRECT PLAY
button twice.
To cancel random play:
Press the DIRECT PLAY button.
"R" will go out.
To cancel repeat play:
Press the DIRECT PLAY button again.
Notes:
" If you press the
"
" will go out.
button during random play, you can move to
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The
beginning of the track being played will be located.
" In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the but-
ton. Otherwise, the disc(s) will play continuously.
18
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
! Programmed play
You can choose up to 32 selections for playback in the order you
like.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control whilst the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
1 Whilst in the stop mode, press
the MEMORY/SET (MEMORY)
button to enter the programming
save mode.
4
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
2 Press one of the 1 - 5 buttons
to select the desired disc.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original programme.
Selected disc number
3 Press the direct search buttons
on the remote control to select
the desired track.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
Selected track number
or
button.
You can also select a track by pressing the
or
button.
Notes:
4 Press the MEMORY/SET (MEMO-
RY) button to save the track
number.
" When a disc with programmed tracks is ejected, the programme
is automatically cancelled.
" Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
" During the programme operation, random play is not possible.
" During programmed play, the DIRECT PLAY button will not work.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6 Press the button.
The total number of memory will ap-
pear.
7 Press the
/
button to start playback.
19
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 navigation (only for MP3 files)
CD-MPS660E
MP3 navigation:
You can search and play files by folder or title. For example, when
you assign three titles to a file, enter genre (such as jazz) as title 1,
album name as title 2, and music title as title 3 to search the file by
any title.
! You can search and play files by folder or title 1/2/3 within one
MP3 disc (see page 21).
! By entering a name, you can search files by folder or title 1/2/3
within one MP3 disc (see page 22).
! Folders or titles can be programmed within one MP3 disc (see
page 23).
When you enter file names on your PC, connect words with
hyphens. This product recognises the first word as title 1, second
one as title 2, and third one as title 3. Up to three words can be rec-
ognised.
Example:
Folder
(File name)
Title 2
Title 1
Title 3
Folder
Title 2
Title 1
Title 3
AAA
(POPULAR-HITS 1-A MUSIC.mp3)
(POPULAR-HITS 2-B MUSIC.mp3)
BBB
CCC
(JAZZ-HITS 1-A MUSIC.mp3)
(JAZZ-HITS 2-B MUSIC.mp3)
Notes:
! MP3 files must have the extension ".mp3".
(ROCK-HITS 1-A MUSIC.mp3)
(ROCK-HITS 2-B MUSIC.mp3)
(ROCK-HITS 3-C MUSIC.mp3)
(ROCK-HITS 4-D MUSIC.mp3)
! Up to 100 folders or 300 files can be read on the unit. If either
limit is exceeded, no more folders/files are displayed.
! This unit recognises and displays up to 48 characters for folder
names, and up to 32 characters for title 1/2/3.
! All file/folder names appear in uppercase.
20
03/12/19
CD-MPS660E(A)2.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
! File search (by folder or title 1/2/3)
You can search and play files by folder or title 1/2/3 within one MP3
disc.
7 Use the or button to scroll and select a folder (or title),
and then press the ENTER button.
1 Press one of the 1 - 5 buttons to select a disc tray con-
taining an MP3 disc.
Folder name
2 Press the
/
button, and the unit starts to read the MP3
4
disc.
If you press the
files in the selected folder (or title) are played.
/
button instead of the ENTER button, all
3 Press the button to stop playback.
"NAVI READ" appears and the display shows the total number
of folders and files on the selected disc.
8 Use the or button to scroll and select a file.
File name
MP3 disc
indicator
Total number Total number
of folders
of files
9 Press the
/
button to start playback.
4 Press the MP3 NAVIGATION button.
The unit plays from the selected file to the last file in the select-
ed folder (or title), and the previous display returns.
5 Press the
,
,
or button to se-
Folder Title 1
lect "FOL", "T-1", "T-2" or "T-3".
To search files by folder name, se-
lect "FOL" (will flash).
File search by title 1/2/3:
" In step 5, select "T-1", "T-2" or "T-3" and follow the same steps
as file search by folder.
Title 2 Title 3
" The unit searches all files on the disc, regardless of the folder.
The following steps describe file search by folder:
To stop playback:
Press the button.
6 Press the ENTER button.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
To exit the MP3 navigation mode:
In the stop mode, press the button.
Folder name
Notes:
" In the MP3 navigation mode, direct play and direct search func-
tions are disabled.
" If a folder, title or file name does not appear, or appears incor-
rectly, remove and reinsert the disc and try again.
" If you press the RANDOM button in the stop mode, the MP3 nav-
igation mode will be cancelled.
"
The MP3 NAVIGATION button allows you to go one step back.
" Press the MP3 DISPLAY button to
check the number of files.
21
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
MP3 navigation (only for MP3 files) (continued)
! Character search (for folder or title 1/2/3)
By entering a name, you can search files by folder or title 1/2/3
within one MP3 disc.
8 When finished, press the ENTER button. The unit searches
for the same name within folders (or titles).
1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
on page 21.
2 Press the MP3 NAVIGATION button.
If the search word is not in the folder (or title) name, "NOT
FOUND" appears and the menu returns.
3 Press the
,
,
or button to se-
Folder Title 1
9 Use the or button to scroll and select a folder (or title).
lect "FOL", "T-1", "T-2" or "T-3".
To search files by folder name, se-
lect "FOL" (will flash).
10Press the
/
button to start playback.
All files in the selected folder (or title) are played, and the previ-
ous display returns.
Title 2 Title 3
4 Press the CHARACTER button for 2 seconds.
The display will be ready for editing characters.
1st row: String table
To exit the MP3 navigation mode:
In the stop mode, press the button.
Notes:
" The unit searches regardless of the case, and found names
appear in uppercase.
2nd row: Input editor (8 digits)
" Some symbols do not appear properly.
5 Press the or button to select the desired alphabet.
Character entry with direct buttons:
The direct buttons on the remote
control can also be used for charac-
ter entry.
In step 5 on the left, use buttons 0 -
9 to enter alphabets.
Alphabet types changeas youpress
a button.
Press the
display.
or
button to go to the next page of character
6 Press the CHARACTER button and the active character will
be entered in the 2nd row of the display.
For example, press "2" four times to enter "C".
To delete an entered character, move the cursor to the charac-
ter with the or button and press the CLEAR/DIMMER but-
ton on the remote control.
2
A
B
C
Characters:
7 Repeat steps 5 and 6 to enter characters.
In the folder (or title) name search, you do not have to enter the
full name. The unit searches for names beginning with the en-
tered characters.
1
2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ
0
: indicates a space.
22
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
To check, add or delete programmed contents:
In the stop mode, select a folder (or title) with the or button. If
the folder (or title) is programmed, "MEMORY" flashes.
! Programmed play (for folder, title 1/2/3)
Folders or titles can be programmed within one MP3 disc.
Folder, title 1, title 2 and title 3 cannot be programmed together
simultaneously.
1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
Flashes if the folder (or title)
is programmed
on page 21.
4
2 Press the MP3 NAVIGATION button.
3 Press the
,
,
or button to select "FOL", "T-1", "T-2"
or "T-3" and then press the ENTER button.
" When you press the MEMORY button with "MEMORY" flashing,
the folder (or title) is removed from the programme.
" If you press the MEMORY button with "MEMORY" off, the folder
(or title) is added to the programme.
" To clear all programmes, press the CLEAR/DIMMER button in
the stop mode.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
4 Press the or button to select the desired folder (or title)
and then press the MEMORY button.
To exit the MP3 navigation mode:
In the stop mode, press the button.
" The programmed contents are cleared.
Notes:
The folder (or title) is memorised with all the files.
5 Repeat step 4 for other folders (or titles).
Up to 10 folders (or 10 titles) can be programmed.
" The programmed contents are cleared when you eject a disc,
play another disc, switch the function, or enter the stand-by mode
with the ON/STAND-BY button.
" During programmed play, the DIRECT PLAY button on the main
unit will not work.
6 Press the
/
button to start playback.
" If you press the RANDOM button in the stop mode, the MP3 nav-
igation mode will be cancelled.
If tracks are programmed using track numbers (see "Pro-
grammed play" on page 19):
In the MP3 navigation mode, only programmes by folder (or title)
name are played. When you exit the mode, the programmes by
folder (or title) name are cleared.
Even when you exit the MP3 navigation mode, programmes by track
number are retained, and you can play tracks according to the num-
bers.
Programmed play will always start from the smallest folder (or
title) number.
To stop playback:
Press the button.
" The programmed contents are not cleared.
(Programmes by track number are cleared when you remove the
disc.)
23
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
CD-MPS660E
! Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
" When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
" Auto scan tuning will skip weak signal stations.
" To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Auto power on function:
Press the TUNER (BAND) button to display the "ST" indicator.
" " " will appear when an FM broadcast is in stereo.
" If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
When you press any of the following buttons, the unit turns on.
" TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
"
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
FM stereo mode indicator
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
FM stereo receiving indicator
24
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
! Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
! To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
! To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1 Perform steps 1 - 3 in "Tuning" on page 24.
2 Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
5
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
3 Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
! To erase entire preset memory
1
Press the ON/STAND-BY button to enter the stand-by mode.
Whilst pressing down the button and the X-BASS/DEMO but-
ton, press the CLOCK/TIMER button until "TUNER CL" appears.
2
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
25
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a cassette tape (TAPE 1 or TAPE 2)
CD-MPS660E
! Tape playback
Before playback:
" For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
1 Press the ON/STAND-BY button to turn the power on.
2 Open the cassette com-
partment by pushing the
area marked " ".
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
3 Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing toward you.
TAPE 1
TAPE 2
4 Press the TAPE (1
2) button to select the cassette you
want to listen to.
5 Press the
/
button to
start playback.
Tape play indicator
Auto power on function:
When you press any of the following buttons, the unit turns on.
" TAPE (1 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
button (main unit and remote control): The unit turns on
"
/
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
26
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a cassette tape
CD-MPS660E
! Various tape functions
Before recording:
" When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
Function
Main unit
Remote
control
Operation
" SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
Play
Press in the stop
mode.
" The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
Stop
Press in the playback,
fast forward or fast re-
wind mode.
" For recording, use only normal tapes. Do not use metal or
CrO tapes.
6
Erase-prevention tab of cassette tapes:
Fast for-
ward/Fast
rewind
Press in the playback
or stop mode.
" When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
(TAPE 2
only)
" To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Caution:
" To remove the cassette, press the button, and then open the
compartment.
" Before changing from one tape operation to another, press the
button.
" If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
Tab for side A
Tab for side B
27
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
Recording on a cassette tape (continued)
! Recording from a CD or MP3 disc
You can record the desired disc using the DIRECT PLAY button.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the
button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the DIRECT PLAY button to start
recording.
" Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
" Playback of the disc will start approximately 7 seconds after
the tape starts.
To stop recording:
Press the button.
The disc and tape will stop.
28
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
Sequential recording from several discs:
! Dubbing from tape to tape
1 Perform steps 1 - 5 in "Recording from a CD or MP3 disc" on page
28.
You can record from TAPE 1 to TAPE 2.
1 Press the ON/STAND-BY button to turn the power on.
2 Within 5 seconds, press the
/
button.
2 Load
a
prerecorded cassette
To perform programmed recording:
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
1 Programme discs and tracks (see pages 19, 23).
2 Press the
3 Press the
button.
button.
/
To stop recording:
TAPE 1
TAPE 2
Press the button.
The disc and tape will stop.
6
It is recommended that the recording tape is the same length as
the master tape.
! Recording from the radio
3 Press the TAPE (1
2) button until "TAPE 1" appears on
1 Tune in to the desired station (see page 24).
the display.
2 Load a cassette into the TAPE 2 cassette compartment
4 Press the
button.
with the side to be recorded on facing you.
Recording will be paused.
Wind past the leader of the tape, on which recording cannot be
performed.
5 Press the
/
button to start dubbing.
3 Press the
button.
Recording will be paused.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
4 Press the
/
button to start recording.
To interrupt recording:
! Erasing recorded tapes
Press the
button.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
To resume recording, press the
/
button.
2
To stop recording:
Press the button.
3
4
Press the
Press the
button.
button to start erasing.
/
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
Note:
Make sure that the TAPE 1 is not in use.
29
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation
CD-MPS660E
Timer playback:
The unit turns on and plays the desired source (CD, MP3 disc,
tuner, tape) at a preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a programme on a
radio station.
! Timer playback or timer recording
Before setting timer:
Daily timer: Daily timer play or daily timer recording works at
1 Check that the clock is set to the correct time (refer to page 13).
If it is not set, you cannot use the timer function.
the same preset time every day.
For example, set the timer as a wake-up call every morning.
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the cas-
sette compartment.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio programme, and
use the daily timer to wake up.
1
2
Set the daily timer (pages 30 - 32).
Set the once timer (pages 30 - 32).
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
1 minute or more
Daily timer
3 Within 10 seconds, press the
or
button to se-
lect "ONCE" or "DAILY", and press the MEMORY/SET but-
ton.
Once timer
Start
Note:
Stop
Start
Stop
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
30
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
4 Within 10 seconds, press the
or
button to se-
9 Switch input with the
or
button, and then
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
! When you select the tuner, select a station by pressing the
or
button, and then press the MEMORY/SET
5 Press the
or
button to select "PLAY" or
button.
"REC", and press the MEMORY/SET button.
! If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be cancelled.
White
Red
10Adjust the volume using the VOLUME control, and then
7
press the MEMORY/SET button.
Do not turn the volume up too high.
The illustrations show the daily timer setting.
11Press the ON/STAND-BY button to enter the power stand-
6 Press the
or
button to adjust the hour and
by mode.
then press the MEMORY/SET button.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
The illustrations show the timer playback setting in the daily tim-
er mode.
7 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
Continued to the next page
8 Set the time to finish as in steps 6 and 7 above.
31
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
Timer and sleep operation (continued)
Checking the timer setting in the timer stand-by mode:
12When the preset time is reached, playback or recording will
1 Press the CLOCK/TIMER button.
start.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
The volume will increase gradually until it reaches the preset
volume.
3 Within 10 seconds, press the or button to select
"ONCE CALL" or "DAILY CALL", and press the MEMORY/SET
13When the timer end time is reached, the system will enter
button.
the power stand-by mode automatically.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Once timer:
The timer will be cancelled.
Daily timer:
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is cancelled. Cancel the daily tim-
er when it is not in use.
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-
ton.
Timer will be cancelled (the setting will not be cancelled).
Note:
When performing timer playback or recording using another unit con-
nected to the GAME INPUT sockets, select "GAME" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE ON" or "DAILY ON", and press the MEMORY/SET button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Note:
The timer can also be set with the remote control.
32
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
To cancel the sleep operation:
" Sleep operation
The radio, CD, MP3 disc and cassette tape can all be turned off
automatically.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, proceed as follows.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
1
2
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the or button to select
"SLEEP OFF", and press the MEMORY/SET button.
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
" To use timer and sleep operation together
Sleep and timer playback:
4 Press the
or
button to select the time.
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
7
(Maximum: 3 hours - Minimum: 1 minute)
! 3 hours - 5 minutes 5-minute intervals
! 5 minutes - 1 minute 1-minute intervals
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record
radio programmes whilst sleeping.
5 Press the MEMORY/SET but-
ton.
1
2
Set the sleep time (see left, steps 1 - 5).
"SLEEP" will appear.
Whilst the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 30 - 31).
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
Timer playback or
The volume will be turned down 1 minute before the sleep op-
eration finishes.
recording setting
Sleep timer setting
End time
Desired time
To confirm the remaining sleep time:
1 minute - 3 hours
1
2
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the
"SLEEP X : XX".
or
button to select
Sleep operation will
automatically stop.
Timer playback or recording
start time
"X : XX" is remaining sleep time.
Caution:
! The remaining sleep time is displayed for about 10 seconds.
! You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY/SET button.
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
33
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
CD-MPS660E
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
" Listening to sounds of game, VCR, DVD, etc.
1 Connect a video game system, VCR, DVD, etc. to the front
Game system, VCR,
DVD player, etc.
GAME INPUT (VIDEO, AUDIO L and R) sockets.
2 Connect a TV to the rear VIDEO OUT socket.
Switch the TV input to auxiliary.
3 Press the ON/STAND-BY button to turn the power on.
To the line output sockets
4 Press the GAME/VIDEO button.
5 Play the connected equipment.
White
Yellow
You can enjoy sounds from the supplied speakers and images
on the TV.
Yellow White Red
Red
Note:
To prevent noise interference, place the unit away from the televi-
sion.
Auto power on function:
RCA lead
(not supplied)
Video cable
(not supplied)
When you press any of the following buttons, the unit turns on.
! GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
!
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
TV
" To record sounds of game, VCR, etc.
1 Insert a cassette in the TAPE 2 cassette compartment.
2 Press the GAME/VIDEO button.
To video
input socket
Yellow
3 Press the
4 Press the
5 Start the game system, VCR, etc.
button.
/
button.
Video cable
(not supplied)
Yellow
34
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart
CD-MPS660E
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
! Headphones
" Before plugging in or unplugging the headphones, reduce the
volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
! General
" Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
Symptom
" The clock is not set to the " Did a power failure occur? Reset
correct time. the clock. (Refer to page 13.)
" When a button is pressed, " Set the unit to the power stand-
Possible cause
the unit does not respond.
by mode and then turn it back on.
" If the unit still malfunctions, reset
it. (Refer to page 36.)
" No sound is heard.
" Is the volume level set to "0"?
8
" Are the headphones connected?
" Are the speaker wires discon-
nected?
! CD player
Symptom
Possible cause
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the mid- " Does the disc satisfy the stan-
dle or is not performed
properly.
dards?
" Is the disc distorted or
scratched?
" Playback sounds are
skipped, or stopped in the
middle of a track.
" Is the unit located near excessive
vibrations?
" Is the disc very dirty?
" Has condensation formed inside
the unit?
35
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-MPS660E
Troubleshooting chart (continued)
" Cassette deck
" Tuner
Symptom
Possible cause
Symptom
Possible cause
! The radio makes unusual ! Is the unit placed near the TV or
! Cannot record.
! Is the erase-prevention tab re-
moved?
noises continuously.
computer?
! Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
! Cannot record tracks with ! Is it a normal tape? (You cannot
proper sound quality.
! Cannot erase completely.
! Sound skipping.
record on a metal or CrO tape.)
! Is there slack in the tape?
! Is the tape stretched?
" If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
! Cannot hear treble.
! Are the capstans, pinch rollers,
or heads dirty?
! Sound fluctuation.
! Cannot remove the tape. ! If a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
If such a problem occurs, do the following:
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
force.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
" Remote control
Symptom
Possible cause
" Clearing all the memory (reset)
! The remote control does ! Is the AC power lead of the unit
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
not operate.
plugged in?
! Is the battery polarity correct?
! Are the batteries dead?
2
Whilst pressing down the
button and the X-BASS/DEMO but-
ton, press the
appears.
PRESET button until "CLEAR ALL"
! Is the distance or angle incor-
rect?
! Does the remote control sensor
receive strong light?
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
36
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
CD-MPS660E
" Cleaning the tape-handling parts
" Condensation
! Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
! When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
B
C
A
TAPE 1
" Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
E
B
C
D
TAPE 2
" Care of compact discs
8
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
Playback head
Capstan
Pinch roller
Erase head
Recording/Playback head
! After long use, the deck's heads and capstans may become
magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
! Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
! Keep your discs away from direct sunlight, heat, and excessive
moisture.
! Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
" Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
NO
YES
Correct
! Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
!
Do not apply oil to the inside of the unit. It may cause malfunctions.
37
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
CD-MPS660E
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
" Tuner
Frequency range
FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
" General
" Cassette deck
Power source
AC 230 - 240 V, 50 Hz
110 W
Frequency
response
50 - 14,000 Hz (normal tape)
Power
consumption
Signal/noise ratio
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Dimensions
Width: 260 mm (10-1/4")
Height: 330 mm (13")
Depth: 326 mm (12-7/8")
Wow and flutter
0.3 % (WRMS)
Weight
7.8 kg (17.2 lbs.)
" Speaker
" Amplifier
Type
2-way type speaker system with passive
radiator
Output power
MPO: 440 W (220 W + 220 W) (10 % T.H.D.)
RMS: 240 W (120 W + 120 W) (10 % T.H.D.)
RMS: 160 W (80 W + 80 W) (0.9 % T.H.D.)
Speakers: 6 ohms
5 cm (2") tweeter
13 cm (5-1/8") woofer
10 cm (4") passive radiator
240 W
Output terminals
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Maximum input
power
Video output: 1Vp-p
Input terminals
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
Game/Video: 1Vp-p
Rated input power 120 W
Impedance
Dimensions
6 ohms
Width: 252 mm (9-7/8")
Height: 330 mm (13")
" CD player
Depth: 249 mm (9-13/16")
Type
Signal readout
5-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
Weight
3.6 kg (7.9 lbs.)/each
D/A converter
1-bit D/A converter
20 - 20,000 Hz
Frequency
response
Dynamic range
90 dB (1 kHz)
38
03/12/19
CD-MPS660E(A)3.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Consumer Electronic Products
Congratulations onYour Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12) months
from the date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories, defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused
by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin
infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
03/12/19
CD-MPS660E(A)_WA.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT
DO NOT RETURN THIS PAGE TO SHARP
For your reference, please enter the particulars of your purchase below and retain, with your purchase
documentation.
Model No.
Serial No.
Date of Purchase
Retailer
FOR LOCATION ENQUIRIES WITHIN
FOR PRODUCTS PURCHASED IN
AUSTRALIA
REGARDING YOUR
NEW ZEALAND
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
SHARP CUSTOMER SERVICES
TELEPHONE: 09 - 573 0111
FACSIMILE: 09 - 573 0113
OR CALL SHARP
LOCAL CALL
1 300 135 022
SHARP CORPORATION OF NEW ZEALAND LIMITED
59 Hugo Johnston Drive, Penrose Auckland
SHARP CORPORATION OF AUSTRALIA PTY. LIMITED
A.B.N. 40 003 039 405
1 Huntingwood Drive Blacktown NSW 2148
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
TINSZA040AWZZ
04D R HK 3
SHARP CORPORATION
03/12/19
CD-MPS660E(A)_BA.fm
TINSZA040AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|