Household Type
Do not return this product to
the store. Call 1-800-800-8975*
Monday - Friday, 8 am to 7:30
pm CST and 10 am to 6:30 pm
Saturday or visit our web site,
of the following:
• assembly problems
• replacement of broken or missing
items
• to order replacement parts and
accessories
• to locate the nearest Sanitaire
Warranty Station
*En Mexico llame al (55) 5343-4384
We suggest you record the model, type and serial
numbers below. They are located on the silver rating
plate on your cleaner. For prompt and complete
service information, always refer to these numbers
when inquiring about service.
Model & Type
Serial No.
It is also important to keep your receipt as proof of
date of purchase.
Part No. 75323 (12/04)
©2004 Electrolux Home Care Products Ltd.
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDLE
RELEAS
3 POSITION
ON/OFF
SWITCH
Handle Release
When handle is in collapsed position, press handle release
button and rotate handle into upright position.
PERFORM
INDICATOR
The performance indicator light will come on when there is
a drop in the vacuums performance. Check for a full dust
bag, dirty filters or a clog in the brush roll or hose areas.
If a full bag, dirty filter or clogged brush roll/hose is found,
replace the bag, clean or replace the filters, or unclog the
brush roll/hose areas.
CAUTION: Turn off the switch and unplug the electrical
cord before cleaning unit.
To keep the vacuum cleaner looking new, it can be wiped with
a damp cloth and a mild soap solution, then thoroughly dried.
Never use any type of chemical as chemicals can damage
the cleaner. When not in use, the cleaner should be stored
in a clean, dry place.
Top position is Off. Middle position is for floor cleaning and
cleaning with accessories (brush roll does not turn). Bottom
position is for cleaning carpets (brush roll turns).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The handle release pedal is
located next to the floor between
the two wheels on the back of
the cleaner. Step on the handle
release pedal and pull back
handle to find a comfortable
operating position. Handle will
automatically lock into storage
position when handle is rotated
into upright position.
HANDLE
COLLAPSE
BUTTON
Reset Button
This unit uses a cogged, non-
stretch belt. If a large object
causes the brush roll to jam, the
brush roll motor shuts off and the
Reset Light illuminates. Turn off
and unplug the unit. Check the
brush roll for debris and clean if
needed. Press the reset button,
plug in the unit and turn on to
continue cleaning.
RESET
BUTTON
9
RESET
LIGHT
Reset Light
The reset light is a neon light that
illuminates when the brush roll
jams. See reset button above
for actions to take when this light
comes on.
When preparing to use vacuum, firmly
push the electrical cord down into
the cord retainer. This will place the
electrical cord out of the way while you
vacuum.
Handle Collapse Button
To collapse the handle from the upright
position, press handle collapse button,
rotate handle down until latch in hand
grip locks onto the body.
Cord Storage Hooks
This unit has two convenient cord
storage hooks attached to the
handle. Wind the cord around the
hooks and fasten the plug to the
cord to prevent unwinding.
Download from Www.Somanuals.com. All Manuals Search And Download.
The instructions given in this booklet serve as a guide to routine
maintenance. To avoid unnecessary service calls, check the
bag, belt, and brush roll often. Change the bag if it is full;
replace the belt if it is stretched or cracked, and clean the brush
roll bristles if they are wrapped with thread and hair.
The dust bag plays a very important role in the efficiency of
the vacuum cleaner. The bag traps the dirt and allows the air
to pass through. If the bag becomes clogged, no air can pass
through the cleaner and no cleaning can take place, regardless
of how powerful the unit is. To keep the cleaner operating at
maximum efficiency, change the dust bag frequently. Some
fine particles can restrict air flow very quickly and will decrease
performance even before the bag appears to be full. For that
reason, when vacuuming carpet fresheners or cleaners,
powder, plaster dust, or similar fine substances, the bag may
need to be changed more often.
Dusting Brush
CAUTION: Turn off the switch and unplug the electrical
cord before servicing the bag. Never operate
the vacuum cleaner without the dust bag.
CAUTION: When cleaning new carpet for the first time,
bag will fill quickly. Check often.
Grasp the handle at the top of the front cover. Pull out
and up to remove from the unit.
Collapse the handle from the upright position. Press
handle release button and rotate handle down and
against the body of the cleaner until it locks onto the
body.
Remove Used Disposable Dust Bag
To release used bag, push top of bag retainer latch on
inside of bag compartment and pull used bag down
and out.
The dusting brush and upholstery nozzle fit on both
the hose and the wand with a built-in crevice tool.
Install New Disposable Dust Bag
Use the dusting brush to dust
furniture, blinds, books, lamps,
shelves.
Find bag rails on the inside of the bag compartment.
Locate and position the bag collar (notch toward front)
on bag rails. Push bag collar allowing it to follow the
rails up inside the bag compartment. Push bag release
button, lock bag collar up into bag release. Release
button. The bag is held.
Replace Front Cover
The crevice tool cleans
corners, base boards, between
cushions.
Place tabs on bottom of front cover into slots at the
bottom of the bag compartment. Push up and against
the body of cleaner until it snaps into place.
Bag
Hose elbow rotates for easy use of the hose and
attachments.
To disconnect hose for
inspection of blockages,
alignnotchontopofelbow
with arrow on main body.
Check for blockages and
clear if necessary. Align
notch on top of elbow
with arrow on main body
to reconnect.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
CAUTION: Turn off the switch and unplug the electrical
cord before servicing the cleaner. Never
operate the vacuum cleaner without the dust
bag or filters.
The filters should be checked at each disposable dust bag
change. If the filters are dirty, clean or replace for maximum
performance of your cleaner.
1
Motor Filter
The motor filter is located below the dust bag inside the bag
compartment. Remove the front cover. Take the dust bag out
to check the motor filter. If the motor filter is dirty, remove and
clean or replace with a new filter.
To clean the motor filter, brush the debris off into a trash bin
or vacuum with another vacuum cleaner.
2
The exhaust filter is located behind the dust filter grille below
the bag compartment.
Remove the front cover. (The front cover has to be removed
first to enable removal of exhaust grille.) Lift up on exhaust
grille handle to remove. The filter is attached to the back of
the grille. If the exhaust filter is dirty, remove and clean or
replace with a new filter.
1
To clean the exhaust filter, brush the debris off into a trash
bin or vacuum with another vacuum cleaner.
2
To replace the exhaust filter, tuck the bottom of the filter
behind the two filter retainers at the bottom of the exhaust
grille. Then place the top of the filter behind the two filter
retainers at the top of the grille. Press the filter down on
narrow pegs in the center of the grille. Replace the grille on
the cleaner and replace the front cover.
Exhaust
Grille Handle
EUREKA PRODUCT
Look for the
symbol.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
CAUTION: Turn off the switch and unplug the electrical
cord before servicing the cleaner.
Replace Brush Roll Belt
1
4
Remove the 10 screws on the bottom of the power
nozzle. Flip the power nozzle back upright and remove the
hood.
NOTE: The reset button cover (circled) is spring loaded
so it may become displaced when you remove the
hood. Keep track of reset button and spring.
5
Make sure the reset button cover (circled) is in
position on spring. Replace hood. Hold body and power
nozzle, turn over so bottom of power nozzle is facing up.
Replace screws.
2
Remove broken brush roll belt. Pinch new brush roll
belt together and position new belt so teeth engage cog pulley
on end of motor shaft.
As the brush roll rotates, it sweeps and combs the carpet nap.
Remove hair and threads from the brush roll so it continues
brushing the carpet nap. Check brush roll occasionally for
hair or string that may have wrapped around dowel. Remove
with scissors.
When bristles have worn to about 1/4" in length, carpet
cleaning effectiveness will be reduced. It is time to replace the
brush roll. Follow the instructions in the brush roll belt section
to open up the power nozzle and replace the brush roll.
3
Place the other end of belt around brush roll. Align left
end of brush roll into the base by rotating slightly until brush
roll end cap slides into place.
Secure right end of brush roll into base.
Download from Www.Somanuals.com. All Manuals Search And Download.
hat This Warranty Covers
Your Sanitaire cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of two years.
The warranty is granted only to the original purchaser and members of his or her immediate household. The warranty is subject to the following
provisions.
hat This Warranty Does Not Cover
Parts of the cleaner that require replacement under normal use, such as disposable dust bags, filters, drive belts, light bulbs, and brush roll
bristles.
• Damages or malfunctions caused by negligence, abuse, or use not in accordance with the Ownerʼs Guide.
• Defects or damages caused by unauthorized service or the use of other than Genuine Eureka/Sanitaire parts.
Electrolux Home Care Products NorthAmerica will, at its option, repair or replace a defective cleaner or cleaner part that is covered by this warranty.
As a matter of warranty policy, Electrolux Home Care Products North America will not refund the consumerʼs purchase price.
xtended Warranty for Upright Cleaner (Only)
The base of the Sanitaire Upright cleaner is warranted for five years from the original date of purchase.
xtended Warranty for SYSTEM_PRO Canisters
The motor for SYSTEM_PRO canister cleaners is warranted for five years from the original date of purchase.
arranty Registration
Please fill out and return the warranty registration card accompanying your cleaner.
btaining Warranty Service
To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Sanitaire Authorized Warranty
Station. You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service and Repair.” Be certain that the Warranty Station
is “Sanitaire Authorized.” For the location of the nearest Sanitaire Authorized Warranty Station or for service information, telephone toll free:
USA: 1-800-800-8975
Mexico: (55) 5343-4384
Canada: 1-800-800-8975
If you prefer, you can write to Electrolux Home Care Products North America, Service Division, P.O. Box 3900, Peoria, Illinois 61612, USA. In
Canada write to Electrolux Home Care Products North America, 866 Langs Drive, Cambridge, Ontario N3H 2N7.
If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the SanitaireAuthorized
Warranty Station. Return shipping charges will be paid by the Warranty Station. When returning parts for repair, please include the model, type,
and serial numbers from the data plate on the cleaner.
Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any
warranty for Fitness For A Particular Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you.
Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall Electrolux be liable for any consequential
or incidental damages you may incur in connection with your purchase or use of the cleaner. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary by state.
GENUINE
EUREKA PRODUCT
Q
Q: Why should I use only Genuine Eureka/Sanitaire paper bags, belts, and parts in my Eureka/Sanitaire vacuum cleaner?
A: Using Genuine Sanitaire Products, which are made to our exacting specifications and engineered with emphasis on quality,
performance, and customer satisfaction, ensures the long life and cleaning efficiency of your vacuum cleaner. Overall, this
saves you money and helps to keep your home clean.
Q: How can I be sure I am using only Genuine Eureka/Sanitaire products in my vacuum cleaner?
A: Typically, packaged products and paper bags can be identified by a Eureka or Sanitaire logo. For further identification
assistance, you may call our toll-free number, 1-800-800-8975, for the location of a nearby Eureka/Sanitaire Authorized
Warranty Station.
Q: Are there any differences between “made to fit” or “imitation” and Genuine Eureka/Sanitaire paper bags, belts, and parts?
A: Yes, there are some very important differences in materials, quality, and reliability. Many customers have mistakenly
purchased “imitation” paper bags and parts while thinking they purchased genuine. Unfortunately, many of these customers
discovered the differences after they experienced related difficulties.
For Genuine Sanitaire Value, Accept No Imitations!
Household Warranty
Bloomington, Illinois 61701
Download from Www.Somanuals.com. All Manuals Search And Download.
|