1. Smart phone requirements
•
Confirm Password : Checks whether your password is
entered correctly.
Hardware / Operating System
Requirements
OS
- Android 2.3/4.0/4.1
- 1GHz or higher
•
•
Name : Enter your name.
CPU
RAM
E-mail : Email address is used to recover your account
password.
- 128MB or more (recommended),
RAM : 50MB (Minimum)
`
For further details, please refer to the user’s manual.
M
- WiFi or 3G/LTE wireless communication-
enabled smart phone
Network
Video Codec
- H.264
3. Logging In
Recommended Smart Phones - Galaxy S2/S3
SmartCam
1. Enter your ID and password
created during the subscription
com or on the smartphone
application.
Recommended Tablet PC
- Galaxy Note 10.1
for Android SNH-1011N
English
2. Subscription
1. Run the downloaded application.
•
Remember me :
Saves your account information
for later use.
Auto Login : If checked, logs
in automatically from the next
application running.
•
With SmartCam app, you can monitor what matters to you
directly from your smart phone.
Download the application from the Play Store and install it on
your smart phone.
2. Tap <Login>.
Search keywords for the application: “Samsung SmartCam”,
™
“Smartcam”, “SAMSUNG TECHWIN”, “TECHWIN”.
`
If you forgot your ID or password, use Find ID/Password below the
M
<Login> tab.
2. Tap <Sign up here>.
3. Enter requested information.
4. Check “Agree to the terms and
conditions”, and tap <Register>.
•
•
ID : Create user ID using
both alphabets and numbers
between 8 – 14 characters.
PW : Create password using
alphanumeric characters
between 8 – 14.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Live Video
3. Press and hold the Mic icon and start talking. Press and
hold for 2sec after finished talking to properly send the
audio over the internet.
1. Tap the desired camera’s [
] or
Live Video
tap the <Live> icon.
4. Even if you did not activate the two-way audio function,
you can receive the audio sound of the video. In addition,
the microphone setting should be at least 1 or higher if you
want to use the two-way audio function.
f
`
When there are multiple users logged on to the camera, first person
J
who tap the Talk icon will have the control.
Condition
WiFi
Audio Support
2. Enter the <Camera password>
for the camera selected. This is
the same camera password you
created at the time you registered
the camera.
a
b
c
d
e
O
3G/LTE
Depending on your network.
Relay Mode
X
No.
Description
Relay mode
Capture
You can capture and save a still image from the video.
Enables high quality video (640x480 resolution).
`
Check the <SAVE> option to
save the camera password.
Within 20 seconds, it will start
streaming.
a
If the router where your camera is connected to does not have
the UPnP function or if the camera is connected to a dual
router, your mobile device will be connected to the 3G or LTE
network in a relay mode and you will see the video for the first
seven minutes only. In this case, set your mobile device to WiFi
network to achieve a normal connection.
HQ
b
Video and audio playback depends on the policies of
your service provider or the network connection status.
Flip
Flips the video image.
c
Brightness Adjusts the screen brightness.
d
e
Two-way
Enable 2-way audio between the camera and the
`
Relay mode is added feature where the video from the camera is
transmitted to Samsung server then retransmitted to the user's
computer.
J
Audio
phone.
`
The loading time may be longer depending on the policy of the
service provider or the network connection status.
M
Press and hold to talk. Let go to hear front from the
Mic
f
`
`
Audio is not supported in Relay Mode.
camera.
If the router’s UPnP is not set, then you might be connected in relay
mode. The settings may differ depending on the connected
Broadband Router model. For more information, refer to the user
manual of the applicable router.
Two-way Audio
`
samsungsmartcam.com", go to support page, and refer to
“Troubleshooting” on it.
1. Tap on the Two-way Audio icon.
2. The Mic icon will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Event List
1. Tap on the <Event> icon to see
the YouTube and Picasa event
links.
YouTube icon:
Deleting Each Event
Tap on the YouTube
icon to play the YouTube
video.
1. Tap and hold the desired event to
be deleted.
Audio
Picasa icon:
Detection icon
Tap on the Picasa icon
to see picture.
Motion Detection
Icon
`
`
You will get a notification prompt
when event is detected by the
camera.
M
While transmitting videos to
YouTube or Picasa for about 30
seconds, the device does not detect
Events.
`
Phone does not allow you to play the private videos automatically.
To see the event videos on your phone, tap on the YouTube app and
sign into your account(same YouTube account used for the Camera).
Tap the menu button on your smartphone and select “My Channel”.
Tap “Uploaded Video” and select a desired event video.
2. Tap on <OK> to delete the
M
event.
Deleting All Events
1. Tap the menu button to display
<Delete All> popup.
2. Tap on the <Delete All> to clear
2. If you want to check the event
list, go to the camera settings and
set up the reception of YouTube
or Picasa alarms. If event video
is uploaded to your YouTube
or Picasa account, it will be
the event list.
displayed in the event list.
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Camera Setup
Tap the <Setup> icon to configure a camera to be monitored.
3. Configure the notification.
Time setting
•
•
Push Notification : Notifies alarm
events.
1. Tap <Time setting>.
2. Set the camera’s clock.
YouTube : Creates 30 seconds
long footage and uploads onto
the user’s YouTube account.
•
•
Time Zone : Select your region.
Summer Time : Check this
option if you live in a country
or region where DST(Daylight
Saving Time) is applied.
•
Picasa : Sends event images to
the user’s Picasa account.
4. Tap <Apply>.
Network setting
9. Auto Login Setup
1. Tap the <Network setting>.
2. Configure the wireless network.
1. Move to the <Setup> item.
General setting
•
WiFi : Shows the list of available
access points.
2. Check <Auto Login> to login
automatically from the next
application running.
1. Tap <General setting>.
2. Configure the basic camera
-
: Connecting to the AP
settings.
requires password.
•
Camera Name : Camera name
is used to easily identify the
camera when you have more
than one. i.e., Living room,
Kitchen, Bedroom.
-
: Connecting to the AP
requires no password.
- Show password : The
password entered by user
is displayed on the screen
when selecting encryption
Wifi.
•
Event Alarm : Specify whether
to trigger the alarm or not, and
specify the sensitivity.
•
Other WiFi Networks : Enter the
SSID name and password to
connect to the network.
If selected, it shows guide
on SSID and networking
procedures.
The higher the sensitivity is, the
subtler motion/audio events will
be detected.
10. Info.
1. Move to the <Info.> item.
•
•
Night Vision : Set the IR lighting.
2. Shows the information on
Samsung Techwin Smartcam
Application.
Check <Night Vision> to set the camera to switch to the
vX.XX
night vision mode automatically.
`
The camera LED will change from
flashing blue to solid green within
30 seconds. This confirms the
XXXX, XX, XX
Audio : Adjust the volume of the built-in microphone and
speaker of the camera as appropriate.
M
camera is connected to your WiFi
network. You can now unplug the
camera and place the camera
anywhere within your wireless
network range. If the camera LED did not change to solid green,
please contact our tech support.
Download from Www.Somanuals.com. All Manuals Search And Download.
|