Samsung Printer 350 User Guide
Contact SAMSUNG WORLDWIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.  
Comuníquese con SAMSUNG WORLDWIDE  
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de  
atención al cliente de SAMSUNG.  
Country  
Customer Care Center  
Web Site  
Address  
Samsung Electronics Canada Inc., Customer  
Service 55 Standish Court Mississauga,  
Ontario L5R 4B2 Canada  
CANADA  
1-800-SAMSUNG(726-7864)  
www.samsung.com  
Samsung Electronique Canada Inc.,  
Service à la Clientèle 55 Standish Court  
Mississauga, Ontario L5R 4B2 Canada  
Samsung Electronics America, Inc.  
105 Challenger Road  
Ridgefield Park, NJ 07660-0511  
U.S.A  
1-800-SAMSUNG(726-7864)  
www.samsung.com  
LCD TV  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service, please register  
your product at  
www.samsung.com/register  
Model  
Serial No.  
BN68-02620A-05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.  
Product design and specifications may be changed without notice.  
Important Warranty Information Regarding Television Format Viewing  
See the warranty card for more information on warranty terms.  
✎
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-  
motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model  
offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on  
nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.  
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer  
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines  
can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the  
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture  
sizing features, use these controls to view different formats as a full screen picture.  
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as  
burned-in images, are not covered by your Samsung limited warranty.  
•
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT  
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics  
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide  
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products  
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.  
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original  
Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and  
from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or  
workmanship, and only those encountered in normal use of the product.  
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,  
exchanges or replacements, accessories, options, upgrades, or consumables.  
For the location of a SAMSUNG Authorized Service Center, please call toll-free:  
–
In the United States : 1-800-SAMSUNG (1-800-726-7864)  
–
In Canada : 1-800-SAMSUNG  
Still image warning  
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock  
or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image  
quality. To reduce risk of this effect, please follow below recommendations:  
•
•
•
Avoid displaying the same TV channel for long periods.  
Always try to display any image on full screen, use TV set picture format menu for best possible match.  
Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout  
process.  
•
Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.  
Securing the Installation Space  
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.  
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.  
When using a stand or wall-mount, use parts provided by Samsung Electronics only.  
✎
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.  
x
The appearance may differ depending on the product.  
✎
Installation with a stand.  
Installation with a wall-mount.  
4inches  
4inches  
4inches  
4inches  
4inches  
4inches  
4inches  
© 2010 Samsung Electronics Co., Ltd. All rights reserved.  
English  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Getting Started  
Advanced Features  
y
y
y
y
y
y
y
List of Features ......................................................... 4  
Accessories .............................................................. 4  
Installing the LCD TV Stand ...................................... 4  
Viewing the Control Panel ......................................... 5  
Viewing the Remote Control...................................... 6  
Connecting to an Antenna ........................................ 7  
Plug & Play (Initial Setup)........................................... 7  
y
Media Play.............................................................. 21  
Connecting a USB Device  
21  
Other Information  
y
y
y
y
y
y
Installing the Wall Mount ......................................... 25  
Securing the TV to the Wall (LN32C350 Only) ......... 26  
Securing the TV to the Wall..................................... 27  
Anti-theft Kensington Lock...................................... 27  
Troubleshooting ...................................................... 28  
Specifications ......................................................... 31  
Connections  
y
Connecting to an AV Device...................................... 8  
Connecting to an Audio Device................................. 9  
Connecting to a PC .................................................. 9  
Changing the Input source...................................... 10  
License  
31  
y
y
y
y
y
Dimensions............................................................. 32  
Index ...................................................................... 33  
Basic Features  
y
How to Navigate Menus.......................................... 11  
Channel Menu ........................................................ 11  
y
Seeing Channels  
11  
12  
12  
12  
12  
Using Favorite Channels  
Memorizing channels  
Editing channels  
Other Features  
y
Picture Menu .......................................................... 13  
Changing the Preset Picture Mode  
Adjusting picture settings  
Setting up the TV with your PC  
Changing the Picture Options  
13  
13  
14  
14  
y
y
Sound Menu........................................................... 16  
Changing the Preset Sound Mode  
Adjusting sound settings  
Sound Settings  
16  
16  
16  
Setup Menu............................................................ 17  
Setting the Time  
17  
17  
17  
18  
19  
Using the Sleep Timer  
Setting the On/Off Timer  
Locking Programs  
Other Features  
y
Support Menu......................................................... 20  
Check the Symbol!  
t
O
✎
Note :  
This function can be used by pressing the  
Step by step guide :  
TOOLS button on the remote control.  
Important information  
Informs you how to access  
the menu.  
English  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
List of Features  
y
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed  
without a cable box / STB (Set-Top-Box) satellite receiver.  
y
y
Media Play: Allows you to play music files, and pictures saved on a USB device. (P. 21)  
Self Diagnosis: You can check picture and sound operation. (P. 20)  
Accessories  
✎
✎
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.  
The items' colors and shapes may vary depending on the models.  
y
y
y
Remote Control (BN59-01006A) & Batteries (AAA x 2)  
Owner’s Instructions  
Warranty Card / Safety Guide / Quick Setup Guide  
y
Cleaning Cloth (BN63-01798B)  
Installing the LCD TV Stand  
Components  
When installing the stand, use the provided components and parts.  
A
B
3EA (M4 X L16)  
1 EA  
y
Stand  
y
Screws  
2
1
Front  
Rear  
B
A
✎
✎
✎
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.  
Make sure that at least two persons lift and move the LCD TV.  
Lay the product down, with the screen facing up and fasten the screws.  
English  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the Control Panel  
The product color and shape may vary depending on the model.  
✎
Remote control sensor  
Power Indicator  
Speakers  
P
(Power)  
Turns the TV on or off.  
Aim the remote control towards this spot on the TV.  
Toggles between all the available input sources. In the on-screen menu, use this  
Remote control sensor  
SOURCE  
E
button as you would use the ENTERE button on the remote control.  
Displays an on-screen menu, the OSD (on screen display), of your TV’s features.  
MENU  
Adjusts the volume. In the OSD, use the  
◄ and ► buttons on the remote control.  
y
buttons as you would use the  
y
Changes the channels. In the OSD, use the  
▼ and ▲ buttons on the remote control.  
z
buttons as you would use the  
z
Power Indicator  
Blinks and turns off when the power is on and lights up in standby mode.  
Standby mode  
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount  
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.  
English  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Viewing the Remote Control  
Display and select the available video  
sources. (P. 10)  
Turns the TV on and off.  
Press to directly access to channels.  
Return to the previous channel.  
Cut off the sound temporarily.  
Press to select additional channels  
(digital) being broadcast by the same  
station. For example, to select channel  
‘54-3’, press ‘54’, then press ‘-’ and ‘3’.  
Change channels.  
Adjusts the volume.  
Displays the main on-screen menu.  
Displays the channel list on the screen. (P. 11)  
View the Media Play. (P. 21)  
MEDIA.P  
Displays Favorite Channel Lists on  
the screen. (P. 12)  
Quickly select frequently used functions.  
Press to display information on the TV  
screen. (P. 17)  
Select on-screen menu items and  
change menu values.  
Exit the menu.  
Return to the previous menu.  
A
B
C
D
Buttons used in the Channel list, Media  
Play menu, etc.  
MTS: Press to choose stereo, mono  
or Separate Audio Program  
(SAP broadcast). (P. 16)  
P.SIZE: Picture size selection. (P. 15)  
CC: Controls the caption decoder.  
(P. 19)  
Installing batteries (Battery size: AAA)  
✎
nOTE  
Use the remote control within 23 feet from the TV.  
x
x
Bright light may affect the performance of the remote  
control. Avoid use when nearby fluorescent lights or neon  
signs.  
The color and shape may vary depending on the model.  
x
English  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an Antenna  
When the TV is initially powered on, basic settings proceed automatically.  
✎
Connecting the power cord and antenna.  
VHF/UHF Antenna  
Cable  
ANT OUT  
or  
Power Input  
Plug & Play (Initial Setup)  
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the  
POWERP button. Plug & Play is available only when the Input source is set to TV.  
✎
To return to the previous step, press the red button.  
Selecting a language  
Press the ▲ or ▼ button, then press the ENTER  
Select the desired OSD (On Screen Display) language.  
Selecting Store Demo Press the ◄ or ► button, then press the ENTER button.  
E
button.  
POWER  
1
2
E
or Home Use  
y
Select the Home Use mode. Store Demo Mode is for retail  
environments.  
To return the unit’s settings from Store Demo to Home Use  
(standard): Press the volume button on the TV. When you see the  
volume in the OSD, press and hold MENU for 5 sec.  
P
y
Selecting an antenna  
Selecting a channel  
Press the ▲ or ▼ button, then press the ENTER  
E
button. Select Air, Cable or Auto.  
3
4
5
✎
In Cable mode, you can select the correct signal source among STD, HRC, and IRC  
by pressing the ▲, ▼, ◄ or ► button, then press the ENTER button.  
E
The channel search will start automatically.  
For more information, refer to Channel → Auto Program. (P. 12)  
✎
Press the ENTER  
E
button at any time to interrupt the memorization process.  
Setting the Clock  
Mode  
Set the Clock Mode automatically or manually.  
✎
If you select the Auto, set the daylight saving time.  
Select the time zone where you live.  
Viewing the hD  
Connection Guide.  
The connection method for the best HD screen quality is displayed.  
Press the ENTER button.  
6
7
Enjoy your TV.  
E
If You Want to Reset This Feature...  
O
MENUm  
→ Setup → Plug & Play → ENTERE  
Plug & Play  
Language  
Time  
: English  
: Off  
Game Mode  
V-Chip  
Caption  
Melody  
: Medium  
English  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to an AV Device  
Using an hDMI / DVI Cable: hD connection (up to 1080p)  
We recommend using the HDMI connection for the best quality HD picture.  
Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).  
Device  
R  
W
Red White  
DVI OUT  
AUDIO OUT  
R-AUDIO-L  
BD/DVD player/  
HD cable/sat box  
HDMI OUT  
✎
HDMI IN 1(DVI), 2 / PC/DVI AUDIO IN  
When using an HDMI/DVI cable connection, you must use the hDMI In 1(DVI) jack for video. A DVD, Blu-ray  
player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI  
to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO In jack is required for audio.  
x
x
x
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older  
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external  
device about the HDMI version and, if out of date, request an upgrade.  
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may  
occur.  
Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)  
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR  
✎
When connecting to AV In, the color  
of the AV In [Y/VIDEO] jack (Green)  
does not match the color of the  
video cable (Yellow).  
Y
W
R
R
W
R
B
G
✎
For better picture quality, the  
Component connection is  
recommended over the A/V  
connection.  
Y
R
W
R
W
R
B
G
Y  
R  
W
R
B
G
Blu-ray player  
VIDEO OUT AUDIO OUT  
VCR  
AUDIO OUT  
COMPONENT OUT  
Yellow Red White Red Blue Green  
PR  
PB  
Y
R-AUDIO-L  
R-AUDIO-L  
English  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an Audio Device  
Using an Optical (Digital) or Audio (Analog) Cable Connection  
Available devices: Digital Audio System, Amplifier, Home Theater  
DVD  
Home Theater  
AUDIO IN  
R-AUDIO-L  
Digital audio system  
OPTICAL  
R  
W
Red White  
✎
DIGITAL AUDIO OUT (OPTICAL)  
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume  
of both the TV and the system.  
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.  
x
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the  
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is  
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is  
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to  
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite  
receiver directly to an amplifier or home theater.  
✎
AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater.  
When connecting, use the appropriate connector (sold separately).  
x
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the  
volume level with the amplifier’s volume control.  
Connecting to a PC  
Using an hDMI/DVI Cable / a D-sub Cable  
PC OUT  
AUDIO OUT  
AUDIO OUT  
DVI OUT  
English  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Features  
Display Modes (D-Sub and hDMI/DVI Input)  
Optimal resolution is 1360x768@60Hz.  
Horizontal Frequency  
(KHz)  
Vertical Frequency  
(Hz)  
Pixel Clock Frequency  
(MHz)  
Sync Polarity  
(H / V)  
Mode  
Resolution  
640 x 350  
720 x 400  
640 x 480  
832 x 624  
31.469  
31.469  
35.000  
49.726  
31.469  
37.861  
37.500  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
45.000  
47.712  
35.910  
56.456  
52.500  
70.086  
70.087  
66.667  
74.551  
59.940  
72.809  
75.000  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
60.000  
60.015  
59.950  
74.777  
70.000  
25.175  
28.322  
30.240  
57.284  
25.175  
31.500  
31.500  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
74.250  
85.500  
32.750  
95.750  
89.040  
+ / -  
- / +  
- / -  
IBM  
MAC  
- / -  
- / -  
640 x 480  
800 x 600  
1024 x 768  
- / -  
- / -  
+ / +  
+ / +  
+ / +  
- / -  
VESA DMT  
- / -  
+ / +  
+ / +  
+ / +  
- / +  
- / +  
- / +  
1280 x 720  
1360 x 768  
720 x 576  
VESA CVT  
VESA GTF  
1280 x 720  
1280 x 720  
✎
nOTE  
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.  
The interlace mode is not supported.  
x
x
x
x
The set might operate abnormally if a non-standard video format is selected.  
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.  
Input Cables (Sold Separately)  
HDMI  
HDMI-DVI  
Component  
Composite (AV)  
Coaxial (RF)  
VGA  
Changing the Input source  
Edit Name  
O
MENU  
m
→ Input → Edit Name → ENTERE  
Source List  
■
VCR / DVD / Cable STB / Satellite STB / PVR STB  
/ AV Receiver / Game / Camcorder / PC / DVI PC /  
DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the  
device connected to the input jacks to make your input  
source selection easier.  
O
MENUm  
→ Input → Source List → ENTERE  
Use to select TV or an external input sources  
such as a DVD / Blu-ray player / cable box /  
STB satellite receiver.  
✎
When connecting an HDMI/DVI cable to the HDMI IN  
1(DVI) port, you should set to DVI PC or DVI mode  
under Edit name.  
■
TV / AV / Component / PC /  
HDMI1/DVI / HDMI2  
✎
You can only choose external  
devices that are connected to the  
TV. In the Source List, connected  
inputs will be highlighted.  
✎
PC always stay activated.  
English  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Features  
How to Navigate Menus  
Channel Menu  
¦ Seeing Channels  
Channel List  
Before using the TV, follow the steps below to learn how to  
navigate the menu and select and adjust different functions.  
MEDIA.P  
1
O
MENUm  
→ Channel → Channel List → ENTERE  
Add, delete or set Favorite channels and use  
the program guide for digital broadcasts.  
2
Select a channel in the All Channels, Added  
Channels, Favorite or Programmed screen  
by pressing the ▲ / ▼ buttons, and pressing  
3
4
the ENTERE  
button. Then you can watch  
the selected channel.  
1
2
MENU button: Displays the main on-screen menu.  
ENTER / Direction button: Move the cursor and  
select an item. Confirm the setting.  
6
Air  
E
6-1  
♥ TV #6  
3
4
RETURN button: Returns to the previous menu.  
EXIT button: Exits the on-screen menu.  
7-1  
♥ TV #7  
8
Air  
9
Air  
how to Operate the OSD (On Screen Display)  
9-1  
10  
♥ TV #9  
Air  
The access step may differ depending on the selected menu.  
10-1  
11-1  
♥ TV #10  
♥ TV #11  
The main menu options appear on  
the screen:  
MENU  
m
1
B
C
Air  
Zoom  
Select T Tools ► Next Program  
Picture, Sound, Channel, Setup,  
Input, Application, Support.  
■
All Channels: Shows all currently available  
channels.  
▲ / ▼  
ENTER  
▲ / ▼  
◄ / ►  
Select an icon with the ▲ or ▼  
button.  
2
3
4
5
■
■
■
Added Channels: Shows all added channels.  
E
Press ENTERE  
to access the  
*
Favorite: Shows all favorite channels.  
sub-menu.  
Programmed: Shows all currently reserved  
Select the desired submenu with  
the ▲ or ▼ button.  
programs.  
✎
Using the color buttons with the Channel List  
Adjust the value of an item with the  
◄ or ► button. The adjustment in  
the OSD may differ depending on  
the selected menu.  
B
Green (Zoom): Enlarges or shrinks a channel  
x
number.  
C
Yellow (Select): Selects multiple channel lists.  
x
You can perform the add/delete or add to Favorite/  
delete from Favorite function for multiple channels at  
the same time. Select desired channels and press  
the Yellow button to set all the selected channels at  
ENTER  
E
Press ENTERE  
to confirm the  
6
7
selection.  
EXIT  
e
Press EXIT.  
the same time. The  
the selected channels.  
(Tools): Displays the Channel List option menu.  
(The Options menus may differ depending on the  
situation.)  
c
mark appears to the left of  
T
x
Channel Status Display Icons  
Icons  
c
Operations  
A channel selected.  
A channel set as a Favorite.  
A reserved Program.  
*
)
A program currently being broadcast.  
(
English  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Features  
how to Stop Auto Programming  
1. Press the ENTER button.  
¦ Using Favorite Channels  
E
O
MEnUm  
→ Channel → Channel list → EnTERE  
2. A message will ask Stop Auto Program? Select Yes by  
pressing the ◄ or ► button.  
*
t
Add to Favorite / Delete from Favorite  
3. Press the ENTER  
E
button.  
Set channels you watch frequently as  
Favorites.  
¦ Editing channels  
1. Select a channel and press the TOOLS  
O
MENUm  
→ Channel → Channel List → ENTERE  
button.  
2. Add or delete a channel using the Add to  
Favorite or Delete from Favorite menu  
respectively.  
t
Channel Name Edit  
1. Select a channel and press the TOOLS button.  
2. Edit the channel name using the Channel Name Edit  
6
Air  
menu.  
6-1  
♥ TV #6  
■
Channel Name Edit (analog channels only): Assign your  
7-1  
♥ TV #7  
own channel name.  
Delete  
Add to Favorite  
Timer Viewing  
Select All  
8
Air  
9
Air  
¦ Other Features  
9-1  
10  
♥ TV #9  
Air  
Auto Program  
O
MENUm  
→ Channel → ENTERE  
10-1  
11-1  
♥ TV #10  
♥ TV #11  
Clear Scrambled Channel  
B
C
Air  
Zoom  
Select T Tools ► Next Program  
This function is used to filter out scrambled channels after  
Auto Program is completed. This process may take up to  
20~30 minutes.  
¦ Memorizing channels  
O
MEnUm  
→ Channel → EnTERE  
how to Stop Searching Scrambled Channels  
1. Press the ENTER  
2. Press the ◄ button to select Yes.  
3. Press the ENTER button.  
This function is only available in Cable mode.  
E
button to select Stop.  
t
Antenna (Air / Cable)  
E
Before your television can begin memorizing the available  
channels, you must specify the type of signal source that is  
connected to the TV (i.e. an Air or a Cable system).  
✎
Channel List  
Auto Program  
O
MENUm  
→ Channel → Channel List → ENTERE  
■
■
■
Air: Air antenna signal.  
t
Channel List Option Menu  
Cable: Cable antenna signal.  
Auto: Air and Cable antenna.  
Set each channel using the Channel List menu options (Add/  
Delete, Timer Viewing, Select All/ Deselect All). Option  
menu items may differ depending on the channel status.  
✎
nOTE  
When selecting the Cable TV system: Selects the  
cable system. STD, HRC and IRC identify various  
types of cable TV systems. Contact your local cable  
company to identify the type of cable system that  
exists in your particular area. At this point, the signal  
source has been selected.  
x
1. Select a channel and press the TOOLS button.  
2. Select a function and change its settings.  
■
Add / Delete: Delete or add a channel to display the  
channels you want.  
✎
nOTE  
After all the available channels are stored, it starts  
to remove scrambled channels. The Auto program  
menu then reappears.  
x
All deleted channels will be shown on the All  
Channels menu.  
x
x
x
x
A gray-colored channel indicates the channel  
has been deleted.  
The Add menu only appears for deleted  
channels.  
Delete a channel from the Added Channels or  
Favorite menu in the same manner.  
English  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
■
Timer Viewing: You can set a desired channel to be  
displayed automatically at the set time; even when you  
are watching another channel. Set the current time first  
to use this function.(P. 17)  
Picture Menu  
¦ Changing the Preset Picture Mode  
1. Press the ◄ / ► /▲ / ▼ buttons to select the  
O
MENUm  
→ Picture → Mode → ENTERE  
desired channel in Channel list.  
2. Press the TOOlS button, then select Timer Viewing.  
t
Mode  
3. Scroll up or down to adjust the settings in the box,  
or use the numeric buttons on your remote for  
entering the date and time.  
Select your preferred picture type.  
■
■
■
Dynamic: Suitable for a bright room.  
✎
If you selected Once, Every Week or Every Day  
in Repeat, you can enter the date you want.  
Standard: Suitable for a normal environment.  
Movie: Suitable for watching movies in a dark room.  
4. Select OK, then press the ENTERE button when done.  
nOTE  
✎
¦ Adjusting picture settings  
Only memorized channels can be reserved.  
x
x
Reserved programs will be displayed in the  
Programmed menu.  
O
MENUm  
→ Picture → Backlight → ENTERE  
When a digital channel is selected, press the  
► button to view the digital program.  
x
Backlight / Contrast / Brightness /  
Sharpness / Color / Tint (G/R)  
■
■
Select All: Select all the channels in the channel list.  
Your television has several setting options for picture quality  
control.  
Deselect All: Deselect all the selected channels.  
✎
You can only select Deselect All when one or  
more channels are selected.  
✎
NOTE  
When you make changes to Backlight, Contrast,  
Brightness, Sharpness, Color or Tint (G/R) the  
x
Programmed  
OSD will be adjusted accordingly.  
(in Channel List)  
You can view, modify or delete a show you have reserved to  
watch.  
In PC mode, you can only make changes to  
Backlight, Contrast and Brightness.  
x
x
x
Settings can be adjusted and stored for each  
external device connected to the TV.  
1. Press the ENTERE button to select Channel list.  
2. Press the ◄ and ▼ button move to the Programmed  
Lowering picture brightness reduces power  
consumption.  
menu.  
■
■
Change Info: Change a show you have reserved to watch.  
Cancel Schedules: Cancel a show you have reserved  
to watch.  
■
■
Information: Display a show you have reserved  
to watch. (You can also change the reservation  
Information.)  
Select All / Deselect All: You can select or deselect all  
channels in the channel list.  
Fine Tune  
(analog channels only)  
If the reception is clear, you do not have to fine tune the  
channel, as this is done automatically during the search and  
store operation. If the signal is weak or distorted, fine tune  
the channel manually.  
y
Select Fine Tune in the Channel menu.  
✎
Fine tuned channels that have been saved are marked  
with an asterisk “*” on the right-hand side of the  
channel number in the channel banner.  
✎
To reset the fine-tuning, select Reset.  
English  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Features  
¦ Setting up the TV with your PC  
¦ Changing the Picture Options  
Set the input source to PC.  
Advanced Settings  
t
Auto Adjustment  
O
MENU  
ENTER  
m
→ Picture → Advanced Settings →  
E
O
MENU  
ENTER  
m
→ Picture → Auto Adjustment →  
E
(available in Standard / Movie mode)  
Adjust frequency values/positions and fine tune the settings  
automatically.  
Compared to previous models, new Samsung TVs have a  
more precise picture.  
✎
Not available when connecting through HDMI/DVI  
cable.  
✎
In PC mode, you can only make changes to Gamma  
and White Balance.  
Advanced Settings  
Screen  
Black Tone  
: Off  
►
■
Coarse / Fine: Removes or reduces picture noise. If the  
Dynamic Contrast  
Gamma  
: Medium  
: 0  
noise is not removed by Fine-tuning alone, then adjust  
the frequency as best as possible (Coarse) and Fine-  
tune again. After the noise has been reduced, readjust  
the picture so that it is aligned to the center of screen.  
Color Space  
White Balance  
Flesh Tone  
: Native  
: 0  
■
■
Position: Adjust the PC’s screen positioning if it does  
not fit the TV screen. Press the ▲ or ▼ button to adjust  
the Vertical-Position. Press the ◄ or ► button to adjust  
the Horizontal-Position.  
Edge Enhancement  
: On  
U Move E Enter R Return  
Image Reset: Resets the image to default settings.  
■
■
Black Tone (Off / Dark / Darker / Darkest): Select the  
black level to adjust the screen depth.  
Using Your TV as a Computer (PC) Display  
Dynamic Contrast (Off / Low / Medium / High):  
Adjust the screen contrast.  
Setting Up Your PC Software (Based on Windows XP)  
Depending on the version of Windows and the video card,  
the actual screens on your PC will probably look different, but  
the same basic set-up information will apply in most cases.  
(If not, contact your computer manufacturer or Samsung  
Dealer.)  
■
■
Gamma: Adjust the primary color intensity.  
Color Space (Auto / Native): Adjust the range of colors  
available to create the image.  
■
White Balance: Adjust the color temperature for a more  
natural picture.  
1. Click on “Control Panel” on the Windows start menu.  
2. Click on “Appearance and Themes” in the “Control  
R-Offset / G-Offset / B-Offset: Adjust each color's  
(red, green, blue) darkness.  
Panel” window and a display dialog-box will appear.  
3. Click on “Display” and a display dialog box will appear.  
R-Gain / G-Gain / B-Gain : Adjust each color's (red,  
green, blue) brightness.  
Reset: Resets the White Balance to it's default  
settings.  
4. Navigate to the “Settings” tab on the display dialog-box.  
y
The correct size setting (resolution)  
[Optimum: 1360X768 pixels]  
■
■
Flesh Tone: Emphasize pink "flesh tone".  
y
If a vertical-frequency option exists on your display  
settings dialog box, the correct value is ‘60’ or ‘60 Hz’.  
Otherwise, just click ‘OK’ and exit the dialog box.  
Edge Enhancement (Off / On): Emphasize object  
boundaries.  
English  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After selecting Screen Fit in HDMI (1080i/1080p) or  
Component (1080i/1080p) mode, you may need to  
center the picture:  
x
Picture Options  
O
MENU  
ENTER  
m
→ Picture → Picture Options →  
E
1. Press the ◄ or ► button to select Position.  
2. Press the ENTER  
E
button.  
✎
In PC mode, you can only make changes to the Color  
Tone and Size.  
3. Press the ▲, ▼, ◄ or ► button to move the  
picture.  
Picture Options  
3. Press the ENTER  
4. Press the ◄ or ► button to select Reset.  
5. Press the ENTER button.  
E
button.  
Color Tone  
: Normal  
: 16:9  
►
Size  
E
Digital Noise Filter  
HDMI Black Level  
Film Mode  
: Auto  
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),  
720p (1280x720)  
x
x
: Normal  
: Off  
Settings can be adjusted and stored for each  
external device you have connected to an input on  
the TV.  
U Move E Enter R Return  
Input Source  
Picture Size  
ATV, AV,  
Component (480i, 480p)  
DTV(1080i),  
Component (1080i, 1080p),  
HDMI (720p, 1080i, 1080p)  
PC  
16:9, Zoom1,  
Zoom2, 4:3  
■
Color Tone (Cool / Normal / Warm1 / Warm2)  
✎
Warm1 or Warm2 will be deactivated when the picture  
mode is Dynamic.  
16:9, 4:3, Wide Fit,  
Screen Fit  
✎
Settings can be adjusted and stored for each external  
device connected to an input on the TV.  
16:9, 4:3  
■
Size: Your cable box/satellite receiver  
may have its own set of screen sizes as  
well. However, we highly recommend  
you use 16:9 mode most of the time.  
■
Digital Noise Filter (Off / Low / Medium / High /  
Auto): If the broadcast signal received by your TV is  
weak, you can activate the Digital Noise Filter feature  
to reduce any static and ghosting that may appear on  
the screen.  
16:9: Sets the picture to 16:9 wide  
mode.  
Zoom1: Use for moderate magnification.  
Zoom2: Use for a stronger magnification.  
Wide Fit: Enlarges the aspect ratio of the picture to fit  
the entire screen.  
4:3: Sets the picture to basic (4:3) mode.  
✎
When the signal is weak, try other options until the  
best picture is displayed.  
■
■
HDMI Black Level (Normal / Low): Selects the black  
level on the screen to adjust the screen depth.  
✎
Available only in HDMI mode (RGB signals).  
✎
Do not watch in 4:3 format for a long time. Traces  
of borders displayed on the left, right and center  
of the screen may cause image retention (screen  
burn) which are not covered by the warranty.  
Film Mode (Off / Auto): Sets the TV to automatically  
sense and process film signals from all sources and  
adjusts the picture for optimum quality.  
✎
Available in TV, AV, COMPONENT (480i / 1080i)  
and HDMI (480i / 1080i).  
Screen Fit: Displays the full image without any cut-off  
when HDMI (720p / 1080i / 1080p) or Component  
(1080i / 1080p) signals are input.  
Picture Reset  
✎
NOTE  
(Reset Picture Mode / Cancel)  
After selecting Zoom1, Zoom2 or Wide Fit:  
x
Reset all picture settings to the default values.  
1. Press the ► button to select Position.  
■
Reset Picture Mode: Returns all picture values in the  
currently selected mode to the default settings.  
2. Press the ENTER  
E
button.  
3. Press the ▲ or ▼ button to move the picture up  
or down.  
4. Press the ENTER  
5. Press the ► button to select Reset.  
6. Press the ENTER button to reset the picture  
to its default position.  
E
button.  
E
English  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Features  
Sound Menu  
Multi-Track Sound (MTS)  
(analog channels only)  
¦ Changing the Preset Sound Mode  
■
Mono: Choose for channels that are  
broadcasting in mono or if you are  
having difficulty receiving a stereo signal.  
O
MENUm  
→ Sound → Mode → ENTERE  
■
■
Stereo: Choose for channels that are  
broadcasting in stereo.  
t
Mode  
SAP: Choose to listen to the Separate Audio Program,  
which is usually a foreign-language translation.  
■
■
■
■
■
Standard: Selects the normal sound mode.  
Music: Emphasizes music over voices.  
✎
Depending on the particular program being broadcast,  
you can listen to Mono, Stereo or SAP.  
Movie: Provides the best sound for movies.  
Clear Voice: Emphasizes voices over other sounds.  
Custom: Recalls your customized sound settings.  
Auto Volume (On/Off)  
Because each broadcasting station has its own signal  
conditions, the volume may fluctuate each time channel  
is changed. This feature lets you automatically adjust the  
volume of the desired channel by lowering the sound output  
when the modulation signal is high or by raising the sound  
output when the modulation signal is low.  
¦ Adjusting sound settings  
O
MENUm  
→ Sound → Equalizer → ENTERE  
Equalizer  
Speaker Select  
Adjusts the sound mode.  
(External Speaker / TV Speaker)  
■
■
■
Mode: Selects the sound mode among the predefined  
settings.  
A sound echo may occur due to a difference in decoding  
speed between the main speaker and the audio receiver. In  
this case, set the TV to External Speaker.  
Balance L/R: Adjusts the balance between the right and  
left speaker.  
✎
When Speaker Select is set to External Speaker, the  
volume and MUTE buttons will not operate and the  
sound settings will be limited.  
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth  
Adjustment): Adjusts the level of specific bandwidth  
frequencies.  
✎
When Speaker Select is set to External Speaker, you  
should use these settings.  
■
Reset: Resets the equalizer to its default settings.  
TV speaker: Off, External speaker: On  
x
¦ Sound Settings  
✎
✎
When Speaker Select is set to TV Speaker, you  
should use these settings.  
TV speaker: On, External speaker: On  
x
SRS TruSurround HD (Off / On)  
If there is no video signal, both speakers will be mute.  
SRS TruSurround HD is a patented SRS technology that  
solves the problem of playing 5.1 multichannel content  
over two speakers. TruSurround delivers a compelling,  
virtual surround sound experience through any two-speaker  
playback system, including internal television speakers. It is  
fully compatible with all multichannel formats.  
Sound Reset  
(Reset All / Reset Sound Mode / Cancel)  
■
■
Reset All: Resets all sound settings to the factory  
defaults.  
Reset Sound Mode: Returns all sound values in the  
currently selected mode to the default settings.  
Preferred Language  
(digital channels only)  
Digital-TV broadcasts are capable of  
simultaneous transmission of many  
audio tracks (for example, simultaneous  
translations of the program into foreign  
languages).  
✎
You can only select a language among the ones being  
broadcasted.  
English  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
¦ Setting the Time  
¦ Setting the On/Off Timer  
O
MENU  
ENTER  
m
→ Setup → Time → Timer 1 →  
E
O
MENUm  
→ Setup → Time → ENTERE  
■
Timer 1 / Timer 2 / Timer 3: Three different on / off  
timer settings can be made. You must set the clock first.  
Time  
Timer 1  
On Time  
▲
12  
✎
The current time will appear every time you press the  
INFO button.  
00  
am  
Inactivate  
Inactivate  
▼
Off Time  
■
Clock: Setting the clock is for using various timer  
12  
00  
am  
features of the TV.  
Volume  
Contents  
10  
TV Air  
3
✎
If you disconnect the power cord, you have to set  
the clock again.  
Repeat  
Once  
Sun Mon Tue Wed Thu Fri  
Sat  
Clock Mode: Set up the current time manually or  
automatically.  
– Auto: Set the current time automatically using the  
L Move U Adjust E Enter R Return  
time from a digital channel.  
On Time / Off Time: Set the hour, minute, am/pm  
and activate / inactivate. (To activate the timer with the  
setting you have chosen, set to Activate.)  
✎
The antenna must be connected in order to set  
the time automatically.  
Volume: Set the desired volume level.  
– Manual: Set the current time manually.  
Contents: When the On Time is activated, you can turn  
on a specific channel or play back contents such as  
photo or audio files.  
✎
Depending on the broadcast station and signal,  
the auto time set up may not be correct. In this  
case, set the time manually.  
– TV/USB: Select TV or USB. (Make sure that an USB  
device is connected to your TV.)  
Clock Set: Set the Month, Day, Year, Hour, Minute  
and am/pm.  
– Antenna: Select Air or Cable.  
– Channel: Select the desired channel.  
✎
Available only when Clock Mode is set to  
Manual.  
– Music: Select the folder containing MP3 files on the  
USB device.  
– Photo: Select the folder containing JPEG files on the  
✎
You can set the month, day, year, hour and minute  
directly by pressing the number buttons on the  
remote control.  
USB device.  
DST (Off / On / Auto): Switches the DST(Daylight  
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,  
Sat~Sun or Manual to set at you convenience. If you  
select Manual, you can set up the day you want to  
activate the timer.  
Saving Time) function on or off.  
✎
This function is only available when the Clock  
Mode is set to Auto.  
Time Zone: Select your time zone.  
✎
The  
c
mark indicates the day is selected.  
✎
This function is only available when the Clock  
Mode is set to Auto.  
✎
Auto Power Off (available only when the TV is turned  
on by the Timer): The TV will be automatically turned off  
after 3 hours of being left idle to prevent overheating.  
¦ Using the Sleep Timer  
O
MENU  
ENTER  
m
→ Setup → Time → Sleep Timer →  
E
t
■
Sleep Timer  
: Automatically shuts off the TV  
after a preset period of time. (30, 60, 90, 120, 150 and  
180 minutes).  
✎
To cancel the Sleep Timer, select Off.  
English  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Features  
¦ locking Programs  
■
MPAA Rating: You can block movies depending on  
their MPAA rating. The Motion Picture Association of  
America(MPAA) has implemented a rating system that  
provides parents or guardians with advance information  
on which films are appropriate for children.  
O
MENUm  
→ Setup → V-Chip → ENTERE  
G: General audience (no restrictions). / PG: Parental  
guidance suggested. / PG-13: Parents strongly  
cautioned. / R: Restricted. Children under 17 should be  
accompanied by an adult. / NC-17: No children under  
age 17. / X: Adults only. / NR: Not rated.  
V-Chip  
The V-Chip feature automatically locks out programs that are  
deemed inappropriate for children. The user must enter a PIN  
(personal ID number) before any of the V-Chip restrictions are  
set up or changed.  
✎
The V-Chip will automatically block any category  
that is ‘More restrictive’. For example, if you block  
the PG-13 category, then R, nC-17 and X will  
automatically be blocked also.  
✎
nOTE  
V-Chip function is not available in HDMI,  
Component or PC mode.  
x
■
Canadian English  
The default PIN number of a new TV set is "0-0-0-0"  
Allow all: Press to unlock all TV ratings.  
Block all: Press to lock all TV ratings.  
x
x
x
C: Programming intended for children under age 8. /  
C8+: Programming generally considered acceptable for  
children 8 years and over to watch on their own. /  
G: General programming, suitable for all audiences. /  
PG: Parental Guidance. / 14+: Programming contains  
themes or content which may not be suitable for viewers  
under the age of 14. / 18+: Adult programming.  
■
Change PIN: The Change PIN screen will appear.  
Choose any 4 digits for your PIN and enter them. As  
soon as the 4 digits are entered, the Confirm New  
PIN screen appears. Re-enter the same 4 digits. When  
the Confirm screen disappears, your PIN has been  
memorized.  
✎
The V-Chip will automatically block any category  
that is ‘More restrictive’. For example, if you  
block G category, then PG, 14+ and 18+ will  
automatically be blocked also.  
✎
If you forget the PIN, press the remote-control  
buttons in the following sequence, which resets  
the pin to "0-0-0-0" : POWER (off) → MUTE → 8  
→ 2 → 4 → POWER (on).  
■
Canadian French  
G: General / 8 ans+: Programming generally considered  
acceptable for children 8 years and over to watch  
on their own. / 13 ans+: Programming may not be  
suitable for children under the age of 13. / 16 ans+:  
Programming is not suitable for children under the age of  
16. / 18 ans+: Programming restricted to adults.  
■
■
V-Chip Lock (Off / On): You can block rated TV  
Programs.  
TV Parental Guidelines: You can block TV programs  
depending on their rating. This function allows you to  
control what your children are watching.  
TV-Y: Young children / TV-Y7: Children 7 and over /  
TV-G: General audience / TV-PG: Parental guidance /  
TV-14: Viewers 14 and over / TV-MA: Mature audience  
ALL: Lock all TV ratings. / FV: Fantasy violence /  
V: Violence / S: Sexual situation / L: Adult Language /  
D: Sexually Suggestive Dialog  
✎
The V-Chip will automatically block any category  
that is ‘More restrictive’. For example, if you block  
8 ans+ category, then 13 ans+, 16 ans+ and 18  
ans+ will automatically be blocked also.  
■
Downloadable U.S. Rating: Parental restriction  
information can be used while watching DTV channels.  
✎ The V-Chip will automatically block certain  
categories dealing with more sensitive material.  
For example, if you block TV-Y category, then  
TV-Y7 will automatically be blocked. Similarly, if you  
block the TV-G category, then all the categories  
in the young adult group will be blocked (TV-G,  
TV-PG, TV-14 and TV-MA). The sub-ratings (D, L,  
S, V) work together similarly. So, if you block L sub-  
rating in TV-PG, then the L sub-ratings in TV-14  
and TV-MA will automatically be blocked.  
✎
nOTE  
If information is not downloaded from the  
broadcasting station, the Downloadable U.S.  
Rating menu is deactivated.  
x
x
x
Parental restriction information is automatically  
downloaded while watching DTV channels. It may  
take several seconds.  
The Downloadable U.S. Rating menu is available  
for use after information is downloaded from the  
broadcasting station. However, depending on the  
information from the broadcasting station, it may not  
be available for use.  
Parental restriction levels differ depending on the  
broadcasting station. The default menu name and  
Downloadable U.S. Rating changes depending on  
the downloaded information.  
x
English  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Even if you set the On-screen display to your desired  
language, the Downloadable U.S. Rating menu will  
appear in English only.  
■
Digital Caption Options: (digital channels only)  
x
Size: Options include Default, Small, Standard and  
Large. The default is Standard.  
The rating will automatically block certain categories  
that are more restrictive.  
x
x
Font Style: Options include Default and Styles 0 to 7.  
The default is Style 0.  
Foreground Color: Options include Default, White,  
Black, Red, Green, Blue, Yellow, Magenta and Cyan. You  
can change the color of the letter. The default is White.  
The rating titles (For example: Humor Level..etc) and  
TV ratings (For example: DH, MH, H..etc) may differ  
depending on the broadcasting station.  
Background Color: Options include Default, White,  
Black, Red, Green, Blue, Yellow, Magenta and Cyan.  
You can change the background color of the caption.  
The default is Black.  
Foreground Opacity: This adjusts the opacity of text.  
Options include Default, Transparent, Translucent, Solid  
and Flashing.  
Background Opacity: This adjusts the opacity of  
the caption background. Options include Default,  
Transparent, Translucent, Solid and Flashing.  
Return to Default: This option sets each Size, Font  
Style, Foreground Color, Background Color, Foreground  
Opacity and Background Opacity to its default.  
How to watch a restricted channel  
If the TV is tuned to a restricted channel, the V-Chip will  
block it. The screen will go blank and the following message  
will appear: This channel is blocked by V-Chip. Please  
enter the PIn to unblock.  
✎
If you forget the PIN, press the remote-control buttons  
in the following sequence, which resets the pin to 0-0-  
0-0 : POWER (off) → MUTE → 8 → 2 → 4 → POWER  
(on)  
¦ Other Features  
✎
nOTE  
O
MENUm  
→ Setup → ENTERE  
Digital Caption Options are available only  
x
when Default and Service1 ~ Service6 can be  
selected in Caption Mode.  
Language  
The availability of captions depends on the  
program being broadcasted.  
x
x
x
x
Set the menu language.  
1. Select language and press the ENTER  
E
button.  
The Default setting follow the standards set by  
the broadcaster.  
2. Choose desired language and press the ENTER  
E
button.  
The Foreground and Background cannot be set  
to have the same color.  
✎
Choose between English, Español and Français.  
You cannot set both the Foreground Opacity  
and the Background Opacity to Transparent.  
Caption  
(On-Screen Text Messages)  
Game Mode (Off / On)  
■
Caption (Off / On): You can switch the  
caption function on or off. If captions are  
not available, they will not be displayed  
on the screen.  
When connecting to a game console such as PlayStation™  
or Xbox™, you can enjoy a more realistic gaming experience  
by selecting the game menu.  
✎
The Caption feature does not  
work in Component, HDMI or PC  
modes.  
✎
NOTE  
Restrictions on game mode (Caution)  
x
– To disconnect the game console and connect  
another external device, set Game Mode to Off in  
the setup menu.  
■
Caption Mode: You can select the desired caption  
mode.  
– If you display the TV menu in Game Mode, the  
screen shakes slightly.  
✎
The availability of captions depends on the  
program being broadcasted.  
Game Mode is not available when the input source  
is set to TV or PC.  
x
x
Default / CC1~CC4 / Text1~Text4: (analog channels  
only) The Analog Caption function operates in either  
analog TV channel mode or when a signal is supplied  
from an external device to the TV. (Depending on the  
broadcasting signal, the Analog Caption function may or  
may not work with digital channels.)  
Default / Service1~Service6 / CC1~CC4 /  
Text1~Text4: (digital channels only) The Digital Captions  
function works with digital channels.  
After connecting the game console, set Game Mode  
to On. Unfortunately, you may notice reduced picture  
quality.  
If Game Mode is On:  
– Picture mode is set to Standard and Sound mode  
is set to Movie.  
– Equalizer is not available.  
x
✎
Service1~6 may not be available in digital caption  
mode depending on the broadcast.  
English  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Features  
■
Sound Test: Use the built-in melody sound to check for  
sound problems.  
Melody (Off / Low / Medium / High)  
Set up so that a melody sound comes on when the TV is  
powered On or Off.  
✎
If you hear no sound from the TV’s speakers,  
before performing the sound test, make sure  
Speaker Select is set to TV speaker in the  
Sound menu.  
✎
Only available when the Input source is set to TV. To  
turn the melody off, set Melody to Off.  
✎
The melody will be heard during the test even if  
Speaker Select is set to External Speaker or the  
sound is muted by pressing the MUTE button.  
✎
The Melody does not play.  
When no sound is output from the TV because the  
x
MUTE button has been pressed.  
Yes: If you can hear sound only from one speaker or not  
at all during the sound test, select Yes. There may be a  
problem with the TV. Contact Samsung’s Call Center for  
assistance (1-800-SAMSUNG).  
No: If you can hear sound from the speakers, select No.  
There may be a problem with your external equipment.  
Please check your connections. If the problem persists,  
refer to the external device’s user manual.  
When no sound is output from the TV because the  
volume has been reduced to minimum with the  
VOL – button.  
x
When the TV is turned off by Sleep Timer function.  
x
Energy Saving  
(Off / Low / Medium / High / Auto)  
■
Signal Strength: (Digital channels only) An HD channel’s  
reception quality is either perfect or the channels are  
unavailable. Adjust your antenna to increase signal  
strength.  
Adjust the brightness of the TV in order to reduce power  
consumption. When watching TV at night, set the Energy  
Saving to High to reduce eye fatigue as well as power  
consumption.  
Software Upgrade  
Support Menu  
Upgrades will be possible  
by connecting a USB drive  
to the USB port. Download  
the latest firmware from  
samsung.com and save to  
the USB drive.  
O
MENU  
m
→ Support → ENTERE  
TV Rear Panel  
USB Drive  
Self Diagnosis  
■
Picture Test: Use to check for picture problems. If the  
Current Version - the  
problem continues to occur, check the Color pattern.  
software already installed in the TV.  
Yes: If the test pattern does not appear or there is  
noise in the test pattern, select Yes. There may be a  
problem with the TV. Contact Samsung’s Call Center for  
assistance (1-800-SAMSUNG).  
No: If the test pattern is properly displayed, select No.  
There may be a problem with your external equipment.  
Please check your connections. If the problem persists,  
refer to the external device’s user manual.  
✎
Software is represented as ‘Year/Month/Day_Version’.  
HD Connection Guide  
Refer to this information when connecting external devices  
to the TV.  
Contact Samsung  
View this information when your TV does not work properly  
or when you want to upgrade the software. You can find  
information regarding our call centers and how to download  
products and software.  
English  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Media Play  
Enjoy photos and/or music files saved on a USB  
Mass Storage Class (MSC) device.  
MEDIA.P  
Device Name  
USB  
SUM  
315.0MB/495.0MB Free  
O
MEnU  
(USB) → EnTER  
m
→ Application → Media Play  
E
E
Enter  
e
Exit  
¦ Connecting a USB Device  
1. Turn on your TV.  
TV Rear Panel  
2. Connect a USB device containing photo and/or music files to the USB jack on the  
rear of the TV.  
USB Drive  
3. When the Application selection screen is displayed, press the ► button to select  
Media Play (USB), then press the EnTER  
E
button.  
Using the Media Play Menu  
Viewing a Photo (or Slide Show)  
1. Press the MEnU button. Press the ▲ or ▼ button to select  
Application, then press the EnTER button.  
2. Press the ▲or ▼button to select Media Play (USB), then press the  
EnTER button.  
3. Press the ▲or ▼ button to select the corresponding USB Memory  
Device, then press the EnTER button.  
The Media Play menu differs depending on the USB Memory  
E
Photo  
SUM  
307.2MB/973.7MB  
E
E
✎
✎
Photo  
Music  
Setup  
Device connected to TV.  
L
Move  
E
Enter  
R
Return  
Some devices may not be supported due to compatibility  
problems.  
4. Press the ◄ or ► button to select an icon (Photo, Music, Setup),  
then press the EnTER button.  
E
✎
✎
It might not work properly with unlicensed multimedia files.  
Need-to-Know List before using Media Play (USB)  
Only alphanumeric characters must be used as a folder name or file name (photo, music).  
x
x
The file system only supports FAT16/32 (The NTFS file system is not supported) Certain types of USB Digital camera  
and audio devices may not be compatible with this TV.  
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only  
Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Devices should be connected  
directly to the TV’s USB port. USB (HDD) is not supported.  
x
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.  
SAMSUNG is not responsible for any data file damage or data loss.  
x
x
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB  
Compatibility problem.  
Only MP3 and JPEG file formats are supported.  
x
x
The Media Play (USB) mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or  
48 kHz).  
We recommend the sequential jpeg format.  
x
x
Do not disconnect the USB device while it is loading.  
English  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
MSC supports MP3 and JPEG files, and the PTP device supports JPEG files only.  
MTP (Media Transfer Protocol) is not supported.  
x
x
x
The playing duration of an mp3 file may be displayed as “00:00:00” if its playing time information is not found at the  
start of the file.  
The higher the resolution of the image, the longer it takes to display on the screen.  
The Photo or Music List displays up to 300 folders or files.  
x
x
x
x
x
Loading may take some time depending on the size of the file.  
MP3 files with DRM that have been downloaded from a non-free site cannot be played.  
Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of of the  
content in an integrated and comprehensive way, including the protection of the rights and interests of the content  
providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.  
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.  
x
x
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is  
not played, connect the USB device to the PC, format the device and check the connection.  
If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC  
to permanently delete the file.  
x
Photo  
Viewing a Photo (or Slide Show)  
1. Press the InFO button to display the option View, Start Slide Show,  
1/1 Page  
Delete, Delete All, Deselect All.  
DSC_0558.JPG  
Upper Fold...  
File.....jpg  
Photo  
2. Press the ▲or ▼button to select Start Slide Show then press the  
580 440  
*
78.0KB  
EnTERE  
button.  
Jan 7, 2010  
Folder  
File.....jpg  
File.....jpg  
File.....jpg  
File.....jpg  
File.....jpg  
File.....jpg  
File.....jpg  
File.....jpg  
03  
/
14  
✎
During the slide show, files are displayed in order from the  
currently shown file.  
File.....jpg  
File.....jpg  
✎
MP3 files can be automatically played during the Slide Show  
if the Default Background Music is set to On. To enable this  
function, MP3 files and other photo files must be located in the  
same folder on the USB Memory Device.  
SUM  
307.2MB/973.7MB Free  
File.....jpg  
File.....jpg  
'
Select  
n
Move  
j
Option  
E
Enter  
R
Return  
✎
✎
Press the InFO button during the slide show to set the following options Slide Show Speed, Background Music,  
Background Music Setting, list. Press the ▲ or ▼ button to select the option, then press the EnTER button.  
– After setting the option press the EnTER button to make a change.  
E
E
Press the InFO button during the photo view to set the following options Start Slide Show, Zoom, Rotate, list. Press  
the ▲ or ▼ button to select the option, then press the EnTER button.  
button to make a change.  
E
– After setting the option press the EnTER  
E
English  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music  
Using the MP3 list  
Folder icon  
Music  
SUM  
Music list icon  
307.2MB/973.7MB  
Move to the previous folder stage icon  
✎
The selected file is displayed on the top with its playing time.  
Photo  
Music  
Setup  
L
Move  
E
Enter  
R
Return  
1. To select all files or a file, press the InFO button to display the Music  
1/4 Page  
00:00:00  
menus.  
06-I Will Carry You.mp3  
Upper Folder  
Music  
Press the EnTER  
E
button to select Play, Repeat Music, Delete  
4.3MB  
Folder  
Jan 7, 2010  
2
/
31  
Selected File, Delete, Delete All or Deselect All.  
01-The Way.mp3  
00:03:25  
00:03:25  
00:03:25  
00:03:25  
00:03:25  
00:03:25  
00:03:25  
00:03:25  
e.mp3  
r  
Play  
2. Press the ▲or ▼button to move to an icon, then press the  
Sad Songs.mp3  
ce-gold.mp3  
rglova-The_hill.mp3  
y You.mp3  
rglova.mp3  
rld.mp3  
Repeat Music  
: Off  
EnTERE  
button.  
Delete Selected File  
DeleteAll  
Deselect All  
Pressing the EnTER  
plays the music file.  
Pressing the EnTER  
E
button over a musical note icon immediately  
button over a folder icon shows the music  
E
j
Exit  
Move  
Select  
j
Option  
E
Enter  
R
Return  
files included in the folder.  
■
■
Play: Select to play MP3 files.  
✎
✎
This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed, even if  
they are saved on the same USB device.  
To adjust the music volume, press the  
y
button on the remote control. To mute the sound, press the  
M
MUTE button on the remote control.  
Repeat Music (On / Off): Select to repeatedly play MP3 files in the current folder.  
Playing Music  
y
y
y
Only displays files with the MP3 file extension. Other file extensions are not displayed, even if they are saved on the same  
USB device.  
If the sound is strange when playing MP3 files, adjust the Equalizer and SRS TruSurround hD in the Sound menu. (An  
over-modulated MP3 file may cause a sound problem.)  
Music function information icons  
Repeat Mode is On.  
Repeat Mode is Off.  
When pressing the EnTER  
E
button on the remote control while music is playing.  
English  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Setup  
Using the Setup Menu  
■
■
■
Slide Show Speed: Select to control the slide show speed. You can  
select Fast, normal or Slow.  
Slide show Speed : Fast  
Background Music : On  
Background Music Setting  
Setup  
Background Music: Select to determine whether to play an MP3 file  
during a slide show. You can select Music On or Music Off.  
Repeat Music  
Screen Saver  
Safe Remove  
: On  
Background Music Setting: While a slide show is in progress, use  
the Background Music Setting to select a music file to listen to.  
Select an MP3 file as the background music.  
: 2 hours  
■
Repeat Music: Select to determine whether to repeat playing the  
music when all MP3 files in the current folder have been played.  
U
Move  
E
Enter  
R
Return  
■
■
Screen Saver: Select to set the waiting time before the screen saver appears. The screensaver will appear when no  
button is pressed for 2 hours, 4 hours, 8 hours, 10 hours or Off.  
Safe Remove: You can remove the device safely from the TV.  
Playing the selected photos / music files  
y
y
Press the Yellow button.  
Repeat the above operation to select desired photos / music files.  
✎
Selected photos or files are marked with the symbol  
c. To cancel a selection, press the Yellow button again.  
y
Press the EnTERE  
button to play the selected photos or files.  
English  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Installing the Wall Mount  
Installing the Wall Mount Kit  
The wall mount kit (sold separately) allows you to mount the TV on the wall.  
For detailed information on installing the wall mount, see the instructions provided with the wall mount items. Contact a  
technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the  
product or injury to yourself or others if you elect to install the TV on your own.  
Wall Mount Kit Specifications (VESA)  
✎
The wall mount kit is not supplied, but sold separately.  
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact  
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.  
✎
nOTE  
Standard dimensions for wall mount kits are shown in the table below.  
x
x
x
x
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.  
Do not use screws that do not comply with the VESA standard screw specifications.  
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw  
specifications. Screws that are too long may cause damage to the inside of the TV set.  
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ  
depending on the wall mount specifications.  
x
x
x
Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal  
injury. Samsung is not liable for these kinds of accidents.  
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or  
the consumer fails to follow the product installation instructions.  
Do not mount the TV at more than a 15 degree tilt.  
Always use two people to mount the TV to a wall.  
x
x
Product Family inches  
VESA Spec. (A * B)  
Standard Screw  
Quantity  
75 X 75  
100 X 100  
19~22  
M4  
M6  
23~29  
30~40  
46~55  
57~65  
70~80  
80~  
200 X 100  
200 X 200  
400 X 400  
600 X 400  
800 X 400  
1400 X 800  
LCD-TV  
4
M8  
If the length of the USB device is equal to or longer than 45 mm when used with 26" or 32" models  
installed with a wall mount, the USB device may touch the wall. Therefore, using a short type USB  
device is recommended.  
45mm  
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to  
electric shock.  
English  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Securing the TV to the Wall (LN32C350 Only)  
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do  
not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death.  
Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety,  
you can purchase and install the anti-fall device as described below.  
The TV-holder Kit (Sold Separately)  
The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw  
appropriate for the wall or cabinet you intend to secure the TV-Holder string to. We recommend a size M4xL20 wood screw.  
(M6 X L16)  
TV-Holder (BN96-15753A)  
Screw 1 (32 inches only)  
Installing the TV-holder  
1. Remove the screw attached to the back of your  
TV, and then connect the TV-Holder to the TV  
with the screw included in the TV Holder Kit that  
is designated for your TV.  
✎
Make sure to use only the appropriate  
supplied screw. If you use a different screw,  
you can damage your TV.  
2. Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed.  
✎
If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a  
molly to anchor the screw.  
3. Tie the TV-Holder cord to the screw fastened to the wall or cabinet so that the TV is fixed. See the illustrations below.  
✎
✎
✎
✎
Install the TV close to the wall so that it does not fall.  
When attaching the TV Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety purposes.  
Check the cord occasionally to make sure it is secure.  
Before moving the TV, separate the connected cord first.  
Wall  
4. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have  
any doubt about the security of your connections, contact a professional installer.  
To purchase the TV-holder Kit, contact Samsung Customer Care  
– In the United States: 1-800-Samsung (1-800-726-7864)  
– In Canada: 1-800-Samsung (1-800-726-7864)  
English  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Securing the TV to the Wall  
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your  
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious  
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install  
the anti-fall device for safety purposes, as follows.  
To prevent the TV from falling  
✎
Since the necessary clamps, screws, and string are not supplied,  
please purchase these additionally.  
1. Drive the screws into the clamps and firmly fasten them onto the  
wall. Make sure the screws are firmly fixed into the wall.  
✎
Screw Specifications  
For a 17 ~ 29 Inches LCD TV: M4  
For a 32 ~ 40 Inches LCD TV: M6  
x
x
2. Remove the screws from the back center of the TV, put the screws  
into the clamps, and then fasten the screws onto the TV again.  
3. Connect the clamps fixed onto the TV and the clamps fixed onto  
the wall with a strong cable and then tie the string tightly.  
✎
nOTE  
Wall  
Verify all connections are properly secured. Periodically check  
x
connections for any sign of fatigue for failure. If you have  
any doubt about the security of your connections, contact a  
professional installer.  
Install the TV near to the wall so that it does not fall backwards.  
x
x
x
It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.  
Untie the string before moving the TV.  
Anti-theft Kensington Lock  
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public  
place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual  
provided with the Kensington Lock for additional information on proper use.  
✎
Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.  
To lock the product, follow these steps:  
1. Wrap the Kensington lock cable around a large, stationary object such  
1
as desk or chair.  
2. Slide the end of the cable with the lock attached through the looped end  
of the Kensington lock cable.  
3. Insert the locking device into the Kensington slot on the product (1).  
4. Lock the lock.  
✎
These are general instructions. For exact instructions, see the User  
manual supplied with the locking device.  
<Optional>  
✎
✎
The locking device has to be purchased separately.  
The location of the Kensington slot may be different depending on the TV model.  
English  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Troubleshooting  
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips  
apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.  
Issues  
Solutions and Explanations  
Poor picture  
First of all, please perform the Picture Test and confirm that your TV is properly displaying the test  
image.  
•
go to MENU - Support - Self Diagnosis - Picture Test (P. 20)  
If the test image is properly displayed, the poor picture may be caused by the source or signal.  
The TV image does not look as good as  
it did in the store.  
•
If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or  
Component cables to deliver HD (high definition) picture quality.  
•
•
Cable/Satellite subscribers: Try HD stations from the channel line up.  
Air/Cable Antenna connection: Try HD stations after performing Auto program.  
Many HD channels are upscaled from SD(Standard Definition) contents.  
✎
•
•
Adjust the Cable/Sat box video output resolution to 1080i or 720p.  
The picture is distorted: macroblock  
error, small block, dots, pixelization.  
Compression of video contents may cause picture distortion, especially in fast moving pictures  
such as sports and action movies.  
•
•
Low signal level can cause picture distortion. This is not a TV problem.  
Mobile phones used close to the TV (up to 3.3ft) may cause noise in picture on analog and  
digital TV.  
Color is wrong or missing.  
•
•
If you’re using Component connection, make sure the component cables are connected to the  
correct jacks. Incorrect or loose connections may cause color problems or a blank screen.  
There is poor color or brightness.  
Adjust the Picture options in the TV menu.  
(go to Picture mode / Color / Brightness / Sharpness) (P. 13)  
•
•
Adjust Energy Saving option in the TV menu (go to MENU - Setup - Energy Saving) (P. 20)  
Try resetting the picture to view the default picture setting.  
(go to MENU - Picture - Picture Reset) (P. 15)  
There is a dotted line on the edge of  
the screen.  
•
•
If the picture size is set to Screen Fit, change it to 16:9.  
Change cable/satellite box resolution.  
The picture is black and white.  
•
If you are using an AV composite input, connect the video cable (yellow) to the Green jack of  
component input 1 on the TV.  
When changing channels, the picture  
freezes or is distorted or delayed.  
•
•
If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the  
cable box reboots. It may take up to 20 minutes)  
Set output resolution of the cable box to 1080i or 720p.  
Sound Problem  
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.  
go to MENU - Support - Self Diagnosis - Sound Test (P. 20)  
If the audio is OK, the sound problem may caused by the source or signal.  
•
There is no sound or the sound is too  
low at maximum volume.  
•
Please check the volume the of device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.  
The picture is good but there is no  
sound.  
•
•
Set the Speaker Select option to TV speaker in the Sound menu. (P. 16)  
If you are using an external device, check the device’s audio output option (ex. you may need to  
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).  
•
•
If you are using a DVI to HDMI cable, a separate audio cable is required.  
Reboot the connected device by reconnecting the device’s power cable.  
The speakers are making an  
inappropriate noise.  
•
•
Check the cable connections. Make sure a video cable is not connected to an audio input.  
For Antenna or Cable connections, check the signal information. Low signal level may cause  
sound distortion.  
•
Perform the Sound Test as explained above.  
English  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Issues  
Solutions and Explanations  
No Picture, No Video  
The TV will not turn on.  
•
•
•
Make sure the AC power cord is securely plugged into to the wall outlet and the TV.  
Make sure the wall outlet is working.  
Try pressing the POWER button on the TV to make sure the problem is not the remote.  
If the TV turns on, refer to ‘Remote control does not work’ below.  
The TV turns off automatically.  
There is no picture/video.  
•
•
•
•
Ensure the Sleep Timer is set to Off in the Setup menu. (P. 17)  
If your PC is connected to the TV, check your PC power settings.  
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.  
When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15  
minutes if there is no signal.  
•
•
Check cable connections. (remove and reconnect all cables connected to the TV and external  
devices).  
Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the  
connections to the TV input. For example, if an external device’s output is HDMI, it should be  
connected to an HDMI input on the TV.  
•
•
Make sure your connected devices are powered on.  
Be sure to select the TV’s correct source by pressing the SOURCE button on the remote  
control.  
•
Reboot the connected device by reconnecting the device’s power cable.  
RF(Cable/Antenna) Connection  
The TV is not receiving all channels.  
•
•
Make sure the coaxial cable is connected securely.  
Please try Auto Program to add available channels to the channel list. go to MENU - Channel  
- Auto Program then select Auto and make sure the correct Cable TV signal type is set in the  
menu. There are 3 options. (STD, HRC and IRC) (P. 12)  
•
Verify the Antenna is positioned correctly.  
No Caption on digital channels.  
•
•
Check Caption Setup menu. Try changing Caption Mode Service 1 to CC1. (P. 19)  
Some channels may not have caption data.  
The picture is distorted: macroblock,  
error, small block, dots, pixelization.  
•
Compression of video contents may cause picture distortion. especially on fast moving pictures  
such as sports and action movies.  
•
A low signal can cause picture distortion. This is not a TV problem.  
PC Connection  
A “Mode not Supported” message  
appears.  
•
•
•
Set your PC’s output resolution so it matches the resolutions supported by the TV.  
“PC” is always shown on the source list,  
even if a PC is not connected.  
This is normal; “PC” is always shown on the source list, regardless of whether a PC is  
connected.  
The video is OK but there is no audio.  
If you are using a HDMI connection, check the audio output setting on your PC.  
English  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Issues  
Solutions and Explanations  
Others  
Purple/green rolling horizontal bars and  
buzzing noise from the TV speakers  
with Component cable connection.  
•
Remove the left and right audio connections from the set-top-box. If the buzzing stops, this  
indicates that the set-top-box has a grounding issue. Replace the Component video cables  
with an HDMI connection.  
The picture will not display in full screen.  
The remote control does not work.  
•
•
•
HD channels will have black bars on either side of the screen when displaying upscaled SD  
(4:3) contents.  
Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from  
your TV.  
Adjust picture size option on your external device or TV to full screen.  
•
•
•
Replace the remote control batteries with correct polarity (+/–).  
Clean the transmission window located on the top of the remote.  
Try pointing the remote directly at the TV from 5~6 feet away.  
The cable/set top box remote control  
does not turn the TV on or off, or adjust  
the volume.  
•
Program the Cable/Sat remote control to operate the TV. Refer to the Cable/Sat user manual  
for SAMSUNG TV code.  
A “Mode not Supported” message  
appears.  
•
Check the supported resolution of the TV and adjust the external device’s output resolution  
accordingly. Refer to resolution settings in this manual.  
Caption on TV menu is greyed out.  
•
•
Caption can not be selected in the TV menu when connected via HDMI or Component.  
Caption must be activated on the external device.  
There is a plastic smell the from the TV.  
•
•
This smell is normal and will dissipate over time.  
This function is only available with digital channels from an Antenna / RF/Coax connection.  
(P. 20)  
TV Signal Strength is unavailable in the  
Self Diagnosis Test menu.  
TV is tilted to the right or left side.  
•
•
Remove the stand base from the TV and reassemble it.  
The Channel menu is greyed out  
The Channel menu is only available when the TV source is selected.  
(unavailable).  
Your settings are lost after 30 minutes  
or every time the TV is turned off.  
•
If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.  
Please change from Store Demo mode to Home Use mode in the Plug & Play procedure.  
Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play →  
ENTERE.  
You have intermittent loss of audio or  
video.  
•
•
Check the cable connections and reconnect them.  
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the  
cables are flexible enough for long term use. mounting the TV to the wall, we recommend using  
cables with 90 degree connectors.  
You see small particles when you look  
closely at the edge of the frame of the  
TV.  
•
•
This is part of the product’s design and is not a defect.  
POP (TV’s internal banner ad) appears  
on the screen.  
Select home Use under Plug & Play mode.  
For details, refer to Plug & Play (Initial Setup). (P. 7)  
✎
This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,  
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the  
product.  
English  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Display Resolution  
1360 x768  
Environmental Considerations  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Storage Humidity  
50°F to 104°F (10°C to 40°C)  
10% to 80%, non-condensing  
-4°F to 113°F (-20°C to 45°C )  
5% to 95%, non-condensing  
Model Name  
LN26C350  
26 inches  
LN32C350  
32 inches  
(31.5 inches measured diagonally)  
Screen Size  
(Diagonal)  
(26.0 inches measured diagonally)  
Sound  
Output  
5 W X 2  
5 W X 2  
Dimensions (WxDxH)  
Body  
26.5 X 2.6 X 18 inches  
(673.3 X 65.6 X 456.0 (mm))  
26.5 X 8.7 X 20.2 inches  
(673.3 X 222.2 X 513.4 (mm))  
31.3 X 2.6 X 20.7 inches  
(795.3 X 65.6 X 525.8 (mm))  
31.3 X 9.7 X 23 inches  
With stand  
(795.3 X 247.2 X 585.3 (mm))  
Weight  
Without Stand  
With Stand  
12.7 Ibs (5.7 kg)  
13.4 Ibs (6.1 kg)  
15.7 Ibs (7.1 kg)  
16.8 Ibs (7.6 kg)  
✎
✎
✎
Design and specifications are subject to change without prior notice.  
This device is a Class B digital apparatus.  
For information about power supply, and more about power consumption, refer to the label attached to the product.  
¦ license  
TruSurround HD, SRS and  
symbol are trademarks of SRS Labs, Inc. TruSurround HD technology  
is incorporated under license from SRS Labs, Inc.  
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are  
trademarks of Dolby Laboratories.  
Open source license notice  
In the case of using open source software, Open Source Licenses are available on the product menu.  
English  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Dimensions  
■
Front view / side view  
7
1
2
5
3
6
8
4
(Unit: inches)  
Model name  
LN26C350  
LN32C350  
1
2
3
4
5
6
20.2  
23  
7
2.6  
2.6  
8
8.7  
9.7  
26.5  
31.3  
22.7  
27.5  
12.8  
15.5  
17.2  
18.3  
18  
20.7  
■
Jack panel detail (5.2"H x 6.6"W) / rear view  
26inches  
32inches  
5
5
6
1
1
6
4
4
2
2
3
3
(Unit: inches)  
Model name  
LN26C350  
LN32C350  
1
2
3
4
5
7.9  
7.9  
6
3.9  
7.9  
13.8  
16.6  
17.1  
19.5  
0.3  
0.3  
3.4  
5.8  
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the  
dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.  
© 2010 Samsung Electronics America, Inc  
English  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
A
H
S
Antenna  
7
9
14  
12  
HD  
HDMI  
Home theater  
15  
8
9
Screen Fit  
Sleep Timer  
Slide Show  
Software Upgrade  
Source List  
Speaker Select  
SRS TruSurround HD  
Standby mode  
15  
17  
22  
20  
10  
16  
16  
5
AUDIO OUT  
Auto Adjustment  
Auto Program  
L
B
Language  
License  
19  
31  
Balance  
16  
C
M
T
Cables  
Caption  
Clear Scrambled Channel  
Clear Voice  
Component  
Composite  
10  
19  
12  
16  
8
Media Play  
Melody  
MP3 Play  
MTS  
21  
20  
22  
16  
Timer  
17  
V
Volume  
5, 6, 17  
10  
O
W
Optimal resolution  
10  
D
Wall Mount  
White Balance  
Wide Fit  
25  
14  
15  
DIGITAl AUDIO OUT  
DST (Daylight Saving Time)  
D-sub  
9
17  
9, 10  
14  
P
Photo view  
Picture Reset  
PIN number  
Position  
22  
15  
18  
14  
5
Dynamic Contrast  
E
Power Indicator  
Energy Saving  
Equalizer  
External Speaker  
20  
16  
16  
R
Remote Control  
RGB  
6
14  
F
FAV.Ch button  
Favorite Channel  
6, 12  
12  
G
Game Mode  
19  
English  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quantum Instruments Camera Flash QFT5d R User Guide
Radio Shack Cassette Player Portable Cassette Recorder User Guide
Radio Shack Two Way Radio 03A03 User Guide
RCA Camcorder EZ409HD User Guide
Roland Musical Instrument TD 6V User Guide
Ryobi Brush Cutter CS26 User Guide
Samson Speaker dB300 User Guide
Samson Speaker MDR1248 User Guide
Samsung Car Video System Z 810M User Guide
Savin All in One Printer C6055 User Guide