Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
EIRE
Web Site
Customer Care Centre
0818 717 100
U.K
0845 SAMSUNG (7267864)
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
Model
Serial No.
BN68-01893J-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on Use
ꢀ
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•
Do not display a still image and partially still image on the LCD panel for more than 2 hours as it can cause screen
image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of
brightness and contrast of the screen when displaying a still image.
•
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
•
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
■
WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously.
The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many
programmes received via a Set-top Box.
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the
intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may
cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the
black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not
recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to
decrease the intensity of the picture.
■
IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.
Digital TV (DVB-T) Notice
■
■
FUNCTIONALITIES RELATED TO DIGITAL TV (DVB) ARE ONLY AVAILABLE IN COUNTRIES OR AREAS WHERE DVBT
(MPEG2 AND MPEG4 AVC) DIGITAL TERRESTRIAL SIGNALS ARE BROADCAST. DVB-T is the European consortium
standard for the broadcast transmission of digital terrestrial television. Please check with your local dealer about the availability of
DVB-T service in your area.
Although this TV set meets the current DVB-T standards as of [August, 2008], compatibility with future DVB-T digital terrestrial
broadcast cannot be guaranteed.
■
■
Some Digital TV functions may not be available or operate correctly in some countries or regions.
For more information, please contact your local SAMSUNG customer care centre.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ
Trademark & Label License Notice
TruSurround HD, SRS and
symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is
incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
Symbol
Note
One-Touch Button
TOOL Button
Press
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
ꢂ
25 Sound Menu
25 Mode
Getting Started
5
5
5
6
7
8
8
9
Installing the Stand
Equalizer
Installing the Wall Mount Kit
Anti-Theft Kensington Lock
Securing the Installation Space
Securing the TV to the Wall
Accessories
SRS TruSurround HD
Audio Language
Audio Format
Audio Description
Auto Volume
Speaker Select
26 Sound Reset
Viewing the Control Panel
Viewing the Connection Panel
27 Setup Menu
11 Connections
27 Language
Time
12 Installing Batteries in the Remote Control
13 Viewing the Remote Control
28 Game Mode
Child Lock
Basic Operation
Change PIN
Parental Lock
Subtitle
14 Placing Your Television in Standby Mode
14 Plug & Play Feature
29 Teletext Language
Preference
15 Viewing the Display
Digital Text
Using the Menus
Melody
29 Energy Saving
Common Interface
16 Viewing the Menus
16 Channel Menu
16 Country
30 Input Menu
30 Source List
Edit Name
Auto Store
17 Manual Store
Cable Search Option
18 Now & Next Guide / Full Guide / Default Guide
19 Channel List
30 Support menu
30 Self Diagnosis
31 Software Upgrade
20 Channel Mode
Fine Tune
+
Anynet
21 Picture Menu
32 Connecting Anynet+ Devices
21 Mode
+
33 Setting Up Anynet
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint(G/R)
+
33 Switching between Anynet Devices
35 Recording
Advanced Settings
22 Picture Options
24 Picture Reset
Auto Adjustment
Screen
35 Listening through a Receiver (Home Theatre)
+
36 Troubleshooting for Anynet
Other Information
37 Teletext Feature
38 Using Your TV as a Computer (PC) Display
39 Troubleshooting: Before Contacting
Service Personnel
40 Specifications
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ
Getting Started
Installing the Stand
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only.
Attach your LCD TV to the stand.
■
■
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when assembling
them.
1
■
To make sure the TV is installed on the stand at a proper level, do not apply excess
downward pressure to the upper left of right sides of the TV.
Back
Front
Fasten screws at position
■
1
and then fasten screws at position
Stand the product up and fasten the screws. If you fasten the screws with the LCD
TV placed down, it may lean to one side.
The stand is installed for models with the screen size of 37 inch and above.
2.
2
■
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the Wall
Mount items. Contact a technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or
others if you elect to install the TV on your own.
■
■
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
Remove the stand and cover the bottom hole with a cap and fasten with two screws.
Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public place.
The appearance and locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington Lock for proper use.
3
■
■
The locking device has to be purchased separately.
The location of the Kensington Lock may be different depending on its model.
2
Insert the locking device into the Kensington slot on the LCD TV (1) and turn it in the
1
1
2
3
locking direction ( ).
2
Connect the Kensington Lock cable (
3).
Fix the Kensington Lock to a desk or a heavy stationary object.
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing the Installation Space
ꢄ
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
Install the product so the required distances shown in the figure are kept.
■
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
•
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the
product falling.
•
If you use parts provided by another manufacturer, it may result in a problem with the product or fire due to an increase in
the internal temperature of the product due to poor ventilation.
■
When installing the product with a stand
■
When installing the product with a wall-mount
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing the TV to the Wall
ꢅ
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall.
In particular, ensure your children do not hang over or destabilize the TV;
doing so may cause the TV to tip over, causing serious injuries or death.
Follow all safety precautions provided on the included Safety Flyer. For
added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling:
Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the
1
2
screws have been firmly installed onto the wall.
■
You may need additional material such as an anchor depending on the type of
wall.
Wall
■
Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
Remove the screws from the centre back of the TV, put the screws into the clamps,
and then fasten the screws onto the TV again.
■
Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
■
Screw Specifications:
•
For a 32 ~ 40 Inch LCD TV: M6 X 15
Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong
string and then tie the string tightly.
3
4
■
Install the TV near to the wall so that it does not fall backwards.
■
It is safe to connect the string so that the clamps fixed on the wall are equal to or
lower than the clamps fixed on the TV.
Wall
■
Untie the string before moving the TV.
Verify all connections are properly secured. Periodically check connections for any
sign of fatigue for failure. If you have any doubt about the security of your connections,
contact a professional installer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
ꢆ
■
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control & Batteries
Power Cords
Cover-Bottom
Cleaning Cloth
(AAA x 2)
(M4 X L16)
User Manual
Stand Screw X 4
Stand
■
The items colour and shape may vary depending on the model.
■
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
Viewing the Control Panel
■
■
The product colour and shape may vary depending on the model.
You can use a button by pressing the side panel buttons.
Toggles between all the available input
sources. In the on-screen menu, use this
button as you would use the ENTERE
button on the remote control.
Press to see an on-screen
menu of your TV’s features.
Press to increase or decrease the volume.
In the on-screen menu, use the
buttons as you would use the ◄ and ►
Y
buttons on the remote control.
Press to change channels. In the on-screen
menu, use the Z buttons as you would
use the ▼ and ▲ buttons on the remote control.
Speakers
Blinks and turns off
when the power is
on and lights up in
stand-by mode.
Press to turn the TV on and off.
Aim the remote control towards this
spot on the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connection Panel
ꢇ
■
The product colour and shape may vary depending on the model.
1
2
3 4
5
@
7
0
9
8 7
6
!
1
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component such as a Home theatre receiver.
■
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio
only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD / Blu-ray player or Cable / Satellite Box
directly to an Amplifier or Home Theatre, not the TV.
2
3
4
PC
Connect to the video output jack on your PC.
ANT IN
Connects to an antenna or cable TV system.
PC/DVI AUDIO IN
■
■
Connect to the audio output jack on your PC.
DVI audio outputs for external devices.
5
6
AUDIO OUT [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theatre.
KENSINGTON LOCK (depending on the model)
The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking
device, contact the dealer where you purchased the TV.
■
The location of the Kensington Lock may be different depending on its model.
7
HDMI IN 1(DVI), 2, 3
Connects to the HDMI jack of a device with an HDMI output.
■
■
No sound connection is needed for an HDMI to HDMI connection.
Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable
connection, you must use the HDMI IN 1(DVI) jack.
■
You can also use the ports to connect to a PC.
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
What is HDMI?
‘High Definition Multimedia interface’ allows the transmission of high definition digital video data and multiple channels of
digital audio.
The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable
Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable
and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC/DVI AUDIO
IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box /
Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause
annoying flicker or no screen display.
10
8
COMPONENT IN
■
■
■
■
Connect component video cables (optional) to component connector (PR, PB, Y) on the rear of your set and the other ends
to corresponding component video out connectors on the DTV or DVD.
If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (PR, PB, Y) on your set.
The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labelled Y, B-Y and R-Y or Y, Cb
and Cr.
Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DTV or DVD.
9
EXT
Input
Audio (L / R)
O
Output
Video + Audio (L / R)
Only TV or DTV output is available.
Connector
EXT
Video
O
RGB
O
■
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
0
!
SERVICE
Connector for software upgrades.
AV IN [VIDEO] / [R-AUDIO-L]
■
■
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the
A/V device.
@
COMMON INTERFACE Slot
■
■
When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact your service provider.
■
When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that
the channel list is now updated.
•
You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with
your hands since dropping the CI CARD may cause damage to it.
•
•
•
Insert the CI-Card in the direction marked on it.
CAM is not supported in some countries and regions, check with your authorized dealer.
The place of the COMMON INTERFACE Slot may be different depending on its model. PERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
11
OPTICAL (Digital)
AUDIO (Analog)
Analog Audio connection
Using a Audio Cable
Amplifier / DVD Home Theater
AUDIO IN
Digital Audio connection
Using an Optical Cable
Digital Audio System
OPTICAL
HD connection
Using an HDMI Cable
HDMI OUT
HD connection
Using an HDMI/DVI Cable
AUDIO OUT
DVI OUT
Using a D-Sub Cable
AUDIO OUT
PC OUT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Batteries in the Remote Control
1ꢀ
Lift the cover at the back of the remote control upward as shown in the figure.
1
Install two AAA size batteries.
■
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside
the compartment.
2
Replace the cover.
■
Remove the batteries and store them in a cool, dry place if you won’t be using
the remote control for a long time.
If the remote control doesn’t work, check the following:
3
■
•
•
•
•
•
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?O
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
1ꢁ
■
■
■
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product colour and shape may vary depending on the model.
Turns the TV on and off.
Press to change the channel.
Performs the same function
Selects the TV mode directly.
(p. 30)
as the ENTER
E
key of the
Enables you to return to the
previous channel you were
watching.
directional keys. When switching
channels with the numeric
buttons, and you press the
channel number and then the
ENTER
immediately switched.
E
key, the channel is
Press to temporarily cut off the
sound. (p. 30)
Press to display and select the
available video sources. (p. 30)
Press to change channels.
Press to switch to your
favourites channels. (p. 19)
Press to increase or
decrease the volume.
Displays the main on-screen
menu. (p. 16)
Displays the Channel List on
screen. (p. 19)
Use to quickly select frequently
used functions.
Returns to the previous menu.
Use to select on-screen menu
items and change menu values.
(p. 16)
Press to exit the menu. (p. 16)
Use these buttons in the
Channel list menus etc.
Press to display information
on the TV screen. (p. 15, 27)
SRS TS HD selection. (p. 25)
Picture size selection. (p. 23)
I-II
Alternately select Teletext,
Double, or Mix.
Displays the Digital subtitle.
(p. 28)
Sound effect selection.
(p. 26)
Displays the Electronic
Programme Guide (EPG).
(p. 18)
+
Use these buttons in the Anynet
modes. (∏: This remote can
be used to control recording on
Samsung recorders with the
Anynet+ feature)
Teletext Functions (p. 37)
Teletext mode selection
(LIST / FLOF)
Teletext reveal
Teletext previous page
0
5
3
Teletext store
Exit from the Teletext display
Teletext sub page
Teletext index
Teletext hold
Teletext cancel
8
4
:
1
2
6
9
7
Teletext size selection
Colour buttons Fastext topic selection
Teletext next page
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢂ
Basic Operation
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when
you wish to interrupt viewing temporarily (during a meal, for example).
Press the POWERP button on the remote control.
■
The screen is turned off and a red standby indicator appears on your set.
1
2
To switch your set back on, simply press the POWERP button again.
■
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
Press the POWERP button.
■
■
You can also use the POWERP button on the TV.
1
The message You can set the menu language. is displayed.
Select the appropriate language by pressing the ▲ or ▼ button. Press the
ENTER button to confirm your choice.
Press the ◄ or ► button to select Store Demo or Home Use, then the
ENTER button.
Plug & Play
You can set the menu language.
2
3
E
Menu Language
: English
►
E
■
We recommend setting the TV to Home Use mode for the best picture in your
home environment.
E
Enter
■
■
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to
Home Use (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
Press the ENTER
▲ or ▼ button. Press the ENTER
Press the ▲ or ▼ button to select Air or Cable, then press the ENTER
E
button. Select the appropriate country by pressing the
4
5
E
button to confirm your choice.
E
button.
■
Air: Air antenna signal.
■
Cable: Cable antenna signal.
Press the ▲ or ▼ button to select the channel source to memorize.
Press the ENTER button to select Start.
6
E
■
When setting the antenna source to Cable, a step appears allowing you to set
a value for the digital channel search. For more information, refer to page 17.
■
Press the ENTER
at any time to interrupt the
memorization process.
E
button
■
■
■
■
■
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
The channel search will start and end automatically.
Press the ENTER
process.
E
button at any time to interrupt the memorization
■
After all the available channels are stored, the message Set the Clock Mode.
is displayed.
Press the ENTER
E
button. Press the ▲ or ▼ button to select Auto, then press
7
the ENTER button.
E
■
■
If you select Manual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically. If not,
select Manual to set the clock. (Refer to page 27)
The connection method to provide the best quality HD is offered. After confirming
the method, press the ENTER button.
The message Enjoy your TV. is displayed. When you have finished, press the
ENTER button.
8
9
E
E
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to reset this feature...
1ꢃ
Press the MENU button.
Press the ▲ or ▼ button to select Setup, then press the ENTER
1
2
3
E
button.
■
The Plug & Play feature is only
available in the TV mode.
Press the ENTER button again to select Plug & Play.
E
Enter your 4 digit PIN number.
■
The default PIN number of a new TV set is ‘0-0-0-0’.
■
If you want to change PIN number, use the Change PIN function.
Viewing the Display
The display identifies the current channel and the status of certain audio-video
settings.
■
Press the INFO button to viewing
the information.
Press the INFO button on the remote control.
1
The TV will display the channel, the type of sound, and the status of certain picture
and sound settings.
abc1
18:11 Thu
6
Jan
■
Press the INFO button once more or wait approximately 10 seconds and the
display disappears automatically.
DTV Air
18:00
~
6:00
Life On Venus Avenue
Unclassified
No Detaild Information
E
'
Watch
15
Information
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢄ
Using the Menus
Viewing the Menus
Menu provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control
panel on the screen rather than a variety of remote control button presses.
MENU button
Display the main on-screen menu.
RETURN button
Return to the previous menu.
ENTER / Direction button
E
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
EXIT button
Exit the on-screen menu.
Operation the Menu
The access step may differ depending on the selected menu.
Press the MENU button.
■
The menu is displayed on the screen.
1
2
3
4
5
Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
E
Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
E
Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
R
Press the EXIT
e
button to exit from the menu.
Channel Menu
Channel
Option
Description
Country
►
Auto Store
The PIN number input screen appears. Enter your 4 digit
PIN number.
Country
Manual Store
Cable Search Option
Now & Next Guide
Full Guide
❑
Analogue Channel
You can change the country for analogue channels.
Default Guide
: Full Guide
❑
Digital Channel
You can change the country for digital channels.
You can scan for the frequency ranges available to you
(and availability depends on your country). Automatically
allocated programme numbers may not correspond to
actual or desired programme numbers.
Auto Store
■
If a channel is locked using the
Child Lock function, the PIN
input window appears.
Scans for all channels with active broadcast stations and
stores them in the TV’s memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel
Option
Auto Store
Description
1ꢅ
❑
Air / Cable
Antenna source to memorize
■
Digital & Analogue: Digital and Analogue
channels.
■
■
Digital: Digital channels.
Analogue: Analogue channels.
When selecting Cable → Digital &
Analogue or Cable → Digital:
Provide a value to scan for cable channels.
■
Search Mode → Full / Network /Quick
■
Quick
•
Network ID: Displays the network
identification code.
■
If you want to stop Auto Store,
press the ENTER button.
The Stop Auto Store? message
will be displayed. Select Yes by
pressing the ◄ or ► button, then
•
•
•
Frequency: Displays the frequency
for the channel.
Modulation: Displays available
modulation values.
Symbol Rate: Displays available
symbol rates.
E
press the ENTER
E
button.
Scans for a channel manually and stores it in the TV’s memory.
Manual Store
❑
Digital Channel
Manual store for digital channels.
■
Channel: Set the Channel number using the ▲, ▼ or
number (0~9) buttons.
■
■
If a channel is locked using the
Child Lock function, the PIN
input window appears.
Digital Channel is only available
in DTV mode.
■
■
Frequency: Set the frequency using the number buttons.
Bandwidth: Set the bandwidth using the ▲, ▼ or
number (0~9) buttons.
When it has finished, channels are updated in the channel
list.
❑
Analogue Channel
Manual store for analogue channel.
■
Programme (Programme number to be assigned to a
channel): Sets the programme number using the ▲, ▼
or number (0~9) buttons.
Colour System → Auto / PAL / SECAM / NTSC4.43:
Sets the colour system value using the ▲ or ▼ button.
Sound System → BG / DK / I / L: Sets the sound
system value using the ▲ or ▼ button.
Channel (When you know the number of the channel
to be stored): Press the ▲ or ▼ button to select C (Air
channel) or S (Cable channel). Press the ► button, then
press the ▲, ▼ or number (0~9) buttons to select the
required number.
■
■
Analogue Channel is only
available in analogue TV mode.
Channel mode
■
■
■
•
P (Programme mode):
When completing tuning, the
broadcasting stations in your
area have been assigned
to position numbers from
P00 to P99. You can select
a channel by entering the
position number in this
mode.
•
You can also select the channel number directly by
pressing the number (0~9) buttons.
•
•
C (Air channel mode):
You can select a channel
by entering the assigned
number to each air
broadcasting station in this
mode.
S (Cable channel mode):
You can select a channel
by entering the assigned
number for each cable
channel in this mode.
•
If there is abnormal sound or no sound, reselect
the sound standard required.
■
■
Search (When you do not know the channel numbers):
Press the ▲ or ▼ button to start the search. The tuner
scans the frequency range until the first channel or the
channel that you selected is received on the screen.
Store (When you store the channel and associated
programme number): Set to OK by pressing the
ENTERE
button.
Cable Search Option
(depending on the
country)
Using this function, you can manually add the channel
range to be scanned by Full Search mode of the Auto Store
function.
■
■
■
■
Freq.Start (Frequency Start): Set the start frequency
Freq.Stop (Frequency Stop): Set the stop frequency
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel
1ꢆ
Option
Description
The EPG (Electronic Programme Guide) information is
provided by the broadcasters. Programme entries may
appear blank or out of date as a result of the information
broadcast on a given channel. The display will dynamically
update as soon as new information becomes available.
Now & Next Guide /
Full Guide /
Default Guide
■
You can also display the guide
menu simply by pressing the
GUIDE button. (To configure
the Default Guide, refer to the
descriptions.)
❑
Now & Next Guide
For the six channels indicated in the left-hand column,
displays the Current programme and the Next programme
information.
❑
Full Guide
Displays the programme information as time ordered One
hour segments. Two hours of programme information is
displayed which may be scrolled forwards or backwards in
time.
❑
Default Guide → Now & Next Guide / Full Guide
You can decide whether to display either the Now & Next
Guide or the Full Guide when the GUIDE button on the
remote control is pressed.
Now & Next Guide
Full Guide
Full Guide
Now & Next Guide
DTV Cable 900 f tn
Freshmen On Campus
2:00 - 2:30
2:10 Tue 1 Jun
DTV Cable 900 f tn
2:10 Tue 1 Jun
Freshmen On Campus
2:00 - 2:30
No Detailed Information
No Detailed Information
Today
2:00 - 3:00
Freshmen O..
3:00 - 4:00
Now
Next
1
2
3
4
5
6
f tn
1
2
3
4
5
6
f tn
Street Hypn..
No Information
ITV Play
Kerrang!
Kiss
Mint Extra
ITV Play
Kerrang!
Kiss
Mint Extra
Loaded
Loaded
No Information
Kisstory
Fresh 40 with Dynamite MC
The Distillery
Fresh 40 with Dynamite MC
The Distillery
oneword
Smash Hits!
oneword
Smash Hits!
No Information
No Information
Smash Hits! Sunday
Smash Hits! Sunday
▼
▼
Watch
Information
■ Now/Next
■ +24 Hours
■ Exit
Watch
Information
■ Full Guide
■ Exit
(Red)
Using the Now & Next Guide / Full Guide
To...
Watch a programme in the EPG list
Exit the guide
Then...
Select a programme by pressing the ▲, ▼, ◄, ► button.
Press the Blue button
If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTERE button is pressed again, press the
◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone.
Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.
View programme information
Then press the INFO button when the programme of your choice is highlighted.
The programme title is on the upper part of the screen centre.
Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality
Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted
programme are included on the detailed information. “...” will be appeared if the summary is long.
Toggle between the
Press the Red button repeatedly.
Using the Now & Next Guide / Full Guide
In Full Guide
Scrolls backwards quickly (24 hours).
Scrolls forwards quickly (24 hours).
Press the Green button repeatedly.
Press the Yellow button repeatedly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel
Option
Channel List
Description
1ꢇ
■
You can select these options by
simply pressing the CH LIST
button on the remote control.
Using this menu, you can add / delete or set favourites
channels and use the programme guide for digital
broadcasts.
824
825
UKTV Gold
UKTV style
❑
All Channels
A
1
C --
Shows all currently available channels.
A
A
A
A
A
A
2
3
4
5
6
7
C --
C --
C --
C --
C --
C --
❑
Added Channels
♥
Shows all added channels.
❑
Favourites
Shows all favourite channels.
To select the Favourites channels you have set up, press the
FAV.CH button on the remote control.
All
■ Channel Type
■ Zoom
■ Select
T Tools
❑
Programmed
■
TOOLS (Tools): Displays
the Delete (or Add), Add to
Favourite (or Delete from
Favourite), Lock (or Unlock),
Timer Viewing, Edit Channel
Name, Edit Channel Number,
Sort, Select All (or Deselect
All) or Auto Store menu. (The
Options menus may differ
Shows all current reserved programmes.
Select a channel in the All Channels, Added Channels
or Favourites screen by pressing the ▲ / ▼ buttons, and
pressing the ENTER
selected channel.
E
button. Then you can watch the
Using the Colour buttons with the Channel List
■
Red (Channel Type): Toggle between your TV, Radio,
Data / Other and All.
depending on the situation.)
■
■
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists.
You can perform the add/delete or add to favourites/
delete from favourites function for multiple channels at
the same time. Select the required channels and press
the Yellow button to set all the selected channels at
■
Channel Status Display Icons
•
•
A: An Analogue channel.
c: A channel selected by
pressing the Yellow button.
the same time. The
selected channels.
c
mark appears to the left of the
•
•
*: A channel set as a
Favourite.
Channel List Option Menu (in All Channels /
Added Channels / Favourites)
(: A programme currently
being broadcast.
\: A locked channel.
): A reserved programme
■
■
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel
status.
•
•
❑
Add / Delete
824
825
UKTV Gold
UKTV style
You can delete or add a channel to display the channels you
want.
Delete
A
1
C --
Add to Favourite
Lock
A
A
A
A
A
A
2
3
4
5
6
7
C --
C --
C --
C --
C --
C --
■
■
All deleted channels will be shown on All Channels
Timer Viewing
♥
menu.
Edit Channel Name
Sort
You can also delete a channel to the Added Channels or
Favourites menu in the same manner.
▼
❑
Add to Favourite / Delete from Favourite
All
■ Channel Type
■ Zoom
■ Select
T Tools
You can set channels you watch frequently as favourites.
■
The “*” symbol will be displayed and the channel will be
set as a favourite.
■
All favourite channels will be shown on Favourites
■
■
A gray-coloured channel
indicates the channel has been
deleted.
The Add menu only appears for
deleted channels.
menu.
❑
Lock / Unlock
You can lock a channel so that the channel cannot be
selected and viewed.
■
■
■
This function is available only when the Child Lock is set
to On. (Refer to page 28)
The PIN number input screen appears. Enter your 4 digit
PIN number.
■
Press the TOOLS button to
display the Tools menu. You can
also set the add to (or delete
from) Favourite by selecting
Tools → Add to Favourite (or
Delete from Favourite).
The default PIN number of a new TV set is “0-0-0-0”. You
can change the PIN, by selecting Change PIN from the
menu.
■
The “
\” symbol will be displayed and the channel will be
locked.
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel
ꢀ0
Option
Channel List
Description
❑
Timer Viewing
If you reserve a programme you want to watch, the channel
is automatically switched to the reserved channel in the
Channel List; even when you are watching another channel.
To reserve a programme, set the current time first.
(Refer to page 27)
■
Only memorized channels can
be reserved.
■
You can set the channel, day, month, year, hour and
minute directly by pressing the number buttons on the
remote control.
■
■
Reserving a programme will be shown in the
Programmed menu.
Digital Programme Guide and Viewing Reservation:
When a digital channel is selected, and you press
the ► button, the Programme Guide for the channel
appears. You can reserve a programme according to the
procedures described above.
❑
Edit Channel Name (analogue channels only)
Channels can labelled so that their call letters appear
■
The names of digital
whenever the channel is selected.
broadcasting channels are
automatically assigned and
cannot be renamed.
❑
Edit Channel Number (digital channels only)
You can also edit the channel number by pressing the
number buttons on the remote control.
❑
Sort (analogue channels only)
This operation allows you to change the programme
numbers of the stored channels. This operation may be
necessary after using the auto store.
❑
Select All / Deselect All
■
Select All: You can select all the channels in the
channel list.
■
Deselect All: You can deselect all the selected
channels.
■
You can only select Deselect
All when there is a selected
channel.
❑
Auto Store
For detailed procedures on setting up options, refer to
pages 16-17.
Channel List Option Menu (in Programmed))
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.
❑
Change Info
Select to change a viewing reservation.
1 / 1 / 2009
Change Info
13:59
18:59
20:59
5
2
2
TV1
TV3
TV3
Q
❑
Cancel Schedules
Select to cancel a viewing reservation.
Information
Cancel Schedules
T
Information
Select All
McMillan & Wife
❑
Select to view a viewing reservation.
(You can also change the reservation information.)
All
■ Zoom
■ Select
T Tools
E Information
❑
Select All
Select all reserved programmes.
Channel Mode
Fine Tune
When press the P >/< button, Channels will be switched
within the selected channel list.
■
Added Ch.: Channels will be switched within the
memorized channel list.
■
Favourite Ch.: Channels will be switched within the
favourite channel list.
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, you may
have to fine tune the channel manually.
■
Only Analogue TV channels can
be fine tuned.
■
Fine tuned channels that have been saved are marked
with an asterisk ‘*’ on the right-hand side of the channel
number in the channel banner.
■
To reset the fine-tuning, select Reset by pressing the
▲ or ▼ button and then press the ENTER
E
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu
ꢀ1
Picture
Option
Description
Mode
: Standard
►
Backlight
Contrast
: 7
Selects the type of picture settings that best correspond to
your viewing preferences or requirements. Presets a higher
brightness, contrast, and sharpness to the picture.
Mode
: 95
Brightness
Sharpness
Colour
: 45
■
Dynamic
Recommended for use in bright room conditions.
Standard
Recommended for use in a normal viewing condition.
Movie
: 50
: 50
Tint (G / R)
: G50 / R50
■
■
Corresponding to the conditions used in movie,
recommended for use in darker viewing conditions.
■
Press the TOOLS button to
display the Tools menu. You
can also set the picture mode
by selecting Tools → Picture
Mode.
Your television has several setting options that allow you to
control the picture quality.
Backlight /
Contrast /
Brightness /
Sharpness /
Colour /
■
Backlight
Adjusts the brightness of LCD back light.
Contrast
■
Increases or decreases the brightness in white areas of the
picture. Too little contrast and the picture may seem dark;
too much contrast and the picture will lose details in white
images.
■
■
Only analogue TV, Ext., AV
modes of the PAL system,
you cannot use the Tint(G/R)
Function.
Tint(G/R)
When you make changes to
■
Brightness
Backlight, Contrast, Brightness,
Sharpness, Colour or Tint(G/
R), the OSD will be adjusted
accordingly.
Increases or decreases the overall brightness of the
picture, but best used to adjust the black level of the image.
Too little brightness and shadow detail will be lost; too much
brightness and blacks will be gray and washed out.
■
■
In PC mode, you can only make
changes to Backlight, Contrast
and Brightness.
Settings can be adjusted and
stored for each external device
you have connected to an input
of the TV.
The energy consumed during use
can be significantly reduced if the
brightness level of the picture is
lowered, which will reduce the
overall running cost.
■
Sharpness
Increases or decreases the apparent detail in the picture.
Too little sharpness and the image might look soft. Too
much sharpness can add false edges to objects or can
make noise more noticeable.
■
Colour
■
Increases or decreases colour saturation levels in the
picture. Too little colour and the image will be black and
white (undersaturated); too much colour and the image will
look oversaturated and cartoonish.
■
Tint(G/R)
Changes the picture hue from reddish to a greenish
appearance.
Colour
: 50
Samsung’s new TVs allow you to make even more precise
picture settings than previous models.
Advanced Settings
Tint (G / R)
: G50 / R50
Advanced Settings
►
■
Black Tone → Off / Dark / Darker / Darkest
Picture Options
Picture Reset
Increases the picture’s shadow detail by lightening the
black level (ie changing the gamma) at low levels. This is
most commonly used for watching movies with dark scenes
to keep the picture from appearing washed out in bright
rooms.
■
Dynamic Contrast → Off / Low / Medium / High
Increases or decreases the difference between the
brightest and darkest portions of the image with changing
scenes. Shadows are more visible with dark scenes, while
contrast is enhanced with bright scenes.
■
■
Advanced Settings is available in
Standard or Movie mode.
In PC mode, you can only
make changes to Gamma and
White Balance from among the
Advanced Settings items.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Gamma
Option
Description
ꢀꢀ
■
Advanced Settings
Changes the rate at which images ramp or fade from light
to dark. Recommended for advanced users only.
■
Colour Space
Increases or decreases the visible colour range for red,
green and blue. Recommended for advanced users only.
•
Auto: The TV will choose the colour range that
is closest to the range used during TV and movie
production.
•
Native: Displays the most enhanced, vibrant
colours possible.
■
White Balance
You can adjust the colour temperature for more natural
picture colours.
•
•
•
R, G, B-Offset: Fine tunes the white balance, or
colour ‘temperature’ in dark areas by changing the
individual values of R, G, B. Recommended for
advanced users only.
R, G, B-Gain: Fine tunes the white balance, or
colour ‘temperature’ in the light areas by changing
the individual values of R, G, B. Recommended for
advanced users only.
Reset: The previously adjusted white balance will
be reset to the factory defaults.
■
Flesh Tone
Adjusts the colour of flesh tones. Increasing the value
creates a more reddish picture. Decreasing the value
creates a more greenish picture.
■
Changing the adjustment value
will refresh the adjusted screen.
■
Edge Enhancement
Increases or decreases the emphasis at object edges.
Colour Tone
■
Picture Options
Selects a preset white balance, or ‘colour temperature’
setting, to provide either a reddish or bluish hue, dependant
upon your personal preference.
■
■
In PC mode, you can only make
changes to the Colour Tone and
Size from among the items in
Picture Options.
Warm1 or Warm2 is only
activated when the picture mode
is Movie.
•
Cool: Selects a white balance, or colour
‘temperature’ with a bluish hue. Skin tones may
have less warmth but whites will seem brighter.
Recommended when watching normal TV
broadcasting in a bright room.
Normal: Selects the white balance, or colour
“temperature” with a less bluish, more reddish hue.
Suitable for most viewing environments and programs.
Warm1, Warm2: Selects a redder, warmer hue
that more closely matches the setting on monitors
used in the production of TV and movie content.
Recommended when watching movie and dramatic
TV content. The lowest setting is best used for black &
white content.
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Option
Description
ꢀꢁ
■
Size
Picture Options
Changes the screen shape in terms of height and width.
Also known as Aspect Ratio.
■
You can select these options
by simply pressing the P.SIZE
button on the remote control.
•
Auto Wide: Enables the correct picture size to
match the original video signal.
16:9: Sets the picture aspect ratio to fill the screen.
Wide Zoom: Enlarges the middle part of the
•
•
picture.
•
•
•
Zoom: Magnifies the picture contents horizontally
and vertically.
4:3: Sets the picture aspect ratio to 4:3 with black
or gray side bars.
Screen Fit: Matches every pixel of the original
image to a pixel on the TV screen (aka 1:1 pixel
mapping) to show the entire image.
●
Wide Zoom: Press the ► button to select
Position, then press the ENTER button.
Press the ▲ or ▼ button to move the picture up /
down. Then press the ENTER button.
Zoom: Press the ► button to Select Position,
then press the ENTER button. Press the ▲ or
▼ button to move the picture up and down. Then
press the ENTER button. Press the ► button
to Select Size, then press the ENTER button.
E
■
■
■
■
Depending on the input source,
the picture size options may vary.
The items available may differ
depending on the selected mode.
In PC Mode, only 16:9 and 4:3
E
●
E
mode can be adjusted.
E
E
Settings can be adjusted and
stored for each external device
you have connected to an input
of the TV.
Press the ▲ or ▼ button to magnify or reduce the
picture size in the vertical direction. Then press the
ENTERE
button.
●
●
After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Select
Position by pressing the ◄ or ► button. Use the
▲, ▼, ◄ or ► button to move the picture.
■
Temporary image retention may
occur when viewing a static image
on the set for more than two
hours.
Reset: Press the ◄ or ► button to select Reset,
then press the ENTER
the setting.
E
button. You can initialize
If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the Overscan function.
■
Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide
TV, you can determine the picture size you want to see the
4:3 WSS (Wide Screen Service) image or nothing. Each
individual European country requires different picture size
so this function is intended for users to select it.
■
■
This function is available in Auto
Wide mode.
This function is not available in
PC, Component or HDMI mode.
•
•
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more
than 4:3.
•
•
Zoom: Magnify the size of the picture vertically on
screen.
4:3: Sets the picture to 4:3 normal mode.
■
Digital NR → Off / Low / Medium / High / Auto
Can reduce the grain effect or level of video snow seen in
images coming from poor quality sources.
■
HDMI Black Level → Normal / Low
■
■
This function is active only when
an external device is connected to
the TV via HDMI (RGB signals).
Adjusts the black level in the picture according to the type
of signal being transmitted through HDMI.
■
Applies the appropriate video processing needed to
achieve the best picture quality for watching movies.
Film Mode
•
•
Off: Turn the Film Mode function off.
Auto: Improves the picture quality for fast motion
scenes.
Film Mode is supported in TV,
AV, COMPONENT(480i / 1080i)
and HDMI(480i / 1080i).
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Option
Picture Reset
Description
ꢀꢂ
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to
■
default settings.
Brightness:
Sharpness
45
Picture (In the PC mode)
Description
: 50
Option
Auto Adjustment
►
Screen
Use the Auto Adjust function to have the TV set
automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and
adjusts the frequency values and positions.
Auto Adjustment
Advanced Settings
Picture Options
Picture Reset
■
Coarse / Fine
Screen
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Fine-
tuning alone, then adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been
reduced, readjust the picture so that it is aligned on the
centre of screen.
■
Preset: Press the SOURCE button
to select PC mode.
■
PC Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
■
■
This function does not work in
DVI-HDMI mode.
■
Image Reset
You can replace all image settings with the factory default
values.
Press the TOOLS button to
display the Tools menu. You can
also set the Auto Adjustment
by selecting Tools → Auto
Adjustment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Menu
ꢀꢃ
Sound
Option
Description
Mode
: Custom
►
Y
■
■
■
■
■
ou can select a sound mode to suit your personal preferences.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voice over other sounds.
Custom: Recalls your customized sound settings.
Equalizer
Mode
SRS TruSurround HD
Audio Language
Audio Format
: Off
: - - -
: - - -
Audio Description
Auto Volume
: Off
The sound settings can be adjusted to suit your personal
preferences.
Equalizer
■
■
■
Mode: Selects the sound mode among the predefined
settings.
Balance L/R: Adjusts the balance between the right and
left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): To adjust the level of different bandwidth
frequencies.
■
Press the TOOLS button to
display the Tools menu. You can
also configure the sound mode
by selecting Tools → Sound
Mode.
■
Reset: Resets the equalizer settings to the default values.
SRS TruSurround HD is a patented SRS technology that
solves the problem of playing 5.1 multichannel content
over two speakers. TruSurround delivers a compelling,
virtual surround sound experience through any two-speaker
playback system, including internal television speakers.
It is fully compatible with all multichannel formats.
SRS TruSurround HD
■
Press the SRS button on the
remote control to select Off or On.
You can change the default value for audio languages.
Displays the language information for the incoming stream.
Audio Language
(digital channels only)
■
While viewing a digital channel, this function can be
selected.
■
You can only select the language among the actual
languages being broadcast.
When sound is emitted from both the main speaker and
the audio receiver, a sound echo may occur due to the
decoding speed difference between the main speaker
and the audio receiver. In this case, use the TV Speaker
function.
Audio Format
(digital channels only)
■
While viewing a digital channel, this function can be
selected.
■
The Audio Format appears according to the broadcasting
signal.
This is an auxiliary audio function that provides an
additional audio track for visually challenged persons.
This function handles the Audio Stream for the AD (Audio
Description), when it is sent along with the Main audio from
the broadcaster. Users can turn the Audio Description On or
Off and control the volume.
Audio Description
(digital channels only)
■
Audio Description
Turn the audio description function on or off.
Volume
You can adjust the audio description volume.
■
•
Volume is active when Audio Description is set
to On.
■
While viewing a Digital channel, this function can be
selected.
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Auto Volume
■
■
The volume buttons and MUTE
buttons do not operate when the
Speaker Select is set to External
Speaker.
If you select External Speaker
in the Speaker Select menu, the
sound settings will be limited.
When you watch TV with it connecting to a Home theatre,
turn the TV speakers off so you can listen to sound from the
Home theatre’s (external) speakers.
Speaker Select
■
External Speaker: Used to listen to the sound of the
External (Home Theatre) Speakers.
■
TV Speaker: Used to listen to the sound of the TV
Speakers.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Option
Sound Reset
Description
You can restore the Sound settings to the factory defaults.
ꢀꢄ
Selecting the Sound Mode
You can set the sound mode by pressing the DUAL button. When you press it, the current
sound mode is displayed on the screen.
Audio Type
Mono
Dual 1 / 2
MONO
Default
Automatic change
DUAL 1
A2
Stereo
Dual
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
Stereo
Mono
Automatic change
Stereo
MONO ↔ STEREO
NICAM
Stereo
MONO ↔ DUAL 1
Dual
DUAL 1
DUAL 2
■
■
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound
signal.
■
This function is only available in TV mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
ꢀꢅ
Setup
Plug & Play
Option
Description
You can set the menu language.
Clock
Setting the clock is necessary in order to use the various timer
features of the TV. If you disconnect the power cord, you have
to set the clock again.
Language
: English
►
Time
Language
Time
Game Mode
Child Lock
Change PIN
Parental Lock
Subtitle
: Off
: On
❑
■
Clock Mode
You can set up the current time manually or automatically.
•
•
Auto: Set the current time automatically using the time
from the digital broadcast.
■
The current time will appear
every time you press the INFO
button.
Manual: Set the current time to a manually specified time.
■
Clock Set
You can set the current time manually.
•
•
This function is only available when Clock Mode is set
to Manual.
You can set the day, month, year, hour and minute
directly by pressing the number buttons on the remote
control.
■
■
Depending on the broadcast
station and signal, the auto time
may not be set correctly. If this
occurs, set the time manually.
The Antenna or cable must be
connected in order to set the time
automatically.
❑
Sleep Timer
The sleep timer automatically shuts off the TV after a preset
time (30, 60, 90, 120, 150 and 180 minutes).
The TV automatically switches to standby mode when the
timer reaches 0.
■
■
To cancel the Sleep Timer function, select Off.
❑
Timer 1 / Timer 2 / Timer 3
■
Press the TOOLS button to
display the Tools menu. You
can also set the sleep timer by
selecting Tools → Sleep Timer.
Three different on / off timer settings can be made.
You must set the clock first.
■
On Time
Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate.)
■
Off Time
■
■
You can set the hour, minute and
channel by pressing the number
buttons on the remote control.
Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate.)
■
Volume
Set the desired volume level.
Antenna
Select Air or Cable.
Channel
Select the desired channel.
Repeat
■
Auto Power Off
When you set the timer on, the
television will eventually turn off,
if no controls are operated for 3
hours after the TV was turned on
by the timer. This function is only
available in timer on mode and
prevents overheating, which may
occur if a TV is on for too long
time.
■
■
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual.
•
When Manual is selected, press the ► button to select
the desired day of the week. Press the ENTERE button
over the desired day and the c mark will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Option
Game Mode
Description
ꢀꢆ
When connecting to a game console such as PlayStation™
or Xbox™, you can enjoy a more realistic gaming
experience by selecting game menu.
■
To disconnect the game console
and connect another external
device, cancel game mode in the
setup menu.
■
If Game Mode is On:
•
Picture mode is automatically changed to Standard
and cannot be changed.
■
■
If you display the TV menu in
Game Mode, the screen shakes
slightly.
Game Mode is not available in
regular TV and PC mode.
•
Sound mode is automatically changed to Custom
and cannot be changed. Adjust the sound using the
equalizer.
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programme by muting
out video and audio.
Child Lock
■
Before the setup screen appears, the PIN number input
screen appears. Enter your 4 digit PIN number.
■
You can lock some channels in Channel List.
■
■
Child Lock is available only in
TV mode.
The default PIN number of a new
TV set is 0-0-0-0.
You can change your personal ID number that is required to
set up the TV.
■
Change PIN
Before the setup screen appears, the PIN number input
screen appears. Enter your 4 digit PIN number.
■
The default PIN number of a new TV set is 0-0-0-0.
This feature allows you to prevent unauthorized users,
such as children, from watching unsuitable programme by
a 4-digit PIN (Personal Identification Number) code that is
defined by the user.
Parental Lock
■
If you forget the PIN code, press
the remote control buttons in the
following sequence, which resets
the PIN to 0-0-0-0: POWER
(Off) → MUTE → 8 → 2 → 4 →
POWER (On).
■
The Parental Rating item differs depending on the
country.
■
Before the setup screen appears, the PIN number input
screen appears. Enter your 4 digit PIN number.
■
■
The default PIN number of a new TV set is “0-0-0-0”.
You can change the PIN by selecting Change PIN from
the menu.
■
When the parental ratings are set, the “
displayed.
\” symbol is
■
■
Allow All: Press to unlock all TV ratings.
Block All: Press to lock all TV ratings.
You can activate and deactivate the subtitles. Use this
menu to set the Subtitle Mode. Normal under the menu is
the basic subtitle and Hard of hearing is the subtitle for a
hearing-impaired person.
Subtitle
■
Subtitle
Switches subtitles on or off.
Mode
Sets the subtitle mode.
Subtitle Language
Set the subtitle language.
■
■
•
If the programme you are watching does not support
the Hard of hearing function, Normal automatically
activates even though Hard of hearing mode is
selected.
■
You can select these options
simply by pressing the SUBT.
button on the remote control.
•
English is the default in cases where the selected
language is unavailable in the broadcast.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Option
Description
ꢀꢇ
You can set the Teletext language by selecting the
language type.
Teletext Language
■
English is the default in cases where the selected
language is unavailable in the broadcast.
■
Primary Audio Language / Secondary Audio
Language / Primary Subtitle Language / Secondary
Subtitle Language / Primary Teletext Language /
Secondary Teletext Language
Preference
Using this feature, users can select one of the
languages. The language selected here is the default
when the user selects a channel.
If you change the language setting, the Subtitle
Language, Audio Language, and the Teletext Language
of the Language menu are automatically changed to the
selected language.
The Subtitle Language, Audio Language, and the
Teletext Language of the Language menu show a list
of languages supported by the current channel and the
selection is highlighted. If you change this language
setting, the new selection is only valid for the current
channel. The changed setting does not change the
setting of the Primary Subtitle Language, Primary Audio
Language, or the Primary Teletext Language of the
Preference menu.
If the programme is broadcast with digital text, this feature
is enabled.
Digital Text
■
MHEG (Multimedia and Hypermedia Information Coding
Experts Group)
An International standard for data encoding systems
used in multimedia and hypermedia. This is at a higher
level than the MPEG system which includes data-linking
hypermedia such as still images, character service,
animation, graphic and video files as well as multimedia
data. MHEG is user runtime interaction technology
and is being applied to various fields including VOD
(Video-On-Demand), ITV (Interactive TV), EC (Electronic
Commerce), tele-education, tele-conferencing, digital
libraries and network games.
A melody sound can be set to come on when the TV is
powered On or Off.
Melody
■
The Melody does not play
•
When no sound is output from the TV because the
MUTE button has been pressed.
•
When no sound is output from the TV because the
volume has been reduced to minimum with the
volume (-) button.
•
When the TV is turned off by Sleep Timer function.
This feature adjusts the brightness of the TV in order to
reduce power consumption. When watching TV at night,
set the Energy Saving mode option to High to reduce eye
fatigue as well as power consumption.
Energy Saving
■
■
Press the TOOLS button to
display the Tools menu. You
can also set the Energy Saving
option by selecting Tools →
Energy Saving.
■
CI Menu
Common Interface
This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
■
Application Info.
This contains information on CAM inserted in the CI slot
and displays it. The Application Info inserting is about the
CI CARD. You can install the CAM anytime whether the TV
is ON or OFF.
CAM is not supported in some
countries and regions, check with
your authorized dealer.
1. Purchase the CI CAM module by visiting your nearest
dealer or by phone.
2. Insert the CI CARD into the CAM in the direction of the
arrow until it fits.
3. Insert the CAM with the CI CARD installed into the
common interface slot.
(Insert the CAM in the direction of the arrow, right up to
the end so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal
channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Menu
ꢁ0
Input
Option
Description
Source List
Edit Name
Use to select TV or other external input sources such as
DVD / Blu-ray players / Cable Box / Satellite receivers
(Set-Top Box) connected to the TV. Use to select the input
source of your choice.
Source List
■
TV / Ext. / AV / Component / PC / HDMI1/DVI /
HDMI2 / HDMI3
•
You can choose only those external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted and sorted to
the top. Inputs that are not connected will be sorted
to the bottom.
■
■
Press the SOURCE button on
the remote control to view an
external signal source. TV mode
can be selected by pressing the
TV button.
•
Using the Colour buttons on the remote with the
Source list.
●
Red (Refresh): Refreshes the connected external
devices.
●
TOOLS (Tools): Displays the Edit Name and
Information menus.
Name the device connected to the input jacks to make your
input source selection easier.
Edit Name
PC always stays activated
■
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Receiver / Game / Camcorder / PC / DVI / DVI PC / TV
/ IPTV / Blu-ray / HD DVD / DMA
•
When a PC with a resolution of 1920 x 1080@60Hz
is connected to the HDMI IN 1(DVI) port, you
should set the HDMI1/DVI mode to DVI PC in the
Edit Name of the Input mode.
•
When connecting an HDMI/DVI cable to the HDMI
IN 1(DVI) port, you should set the HDMI1/DVI
mode to DVI or DVI PC in the Edit Name of
the Input mode. In this case, a separate sound
connection is required.
Support menu
Support
Option
Description
Self Diagnosis
►
Software Upgrade
HD Connection Guide
Contact Samsung
■
Picture Test
Self Diagnosis
If you think you have a picture problem, perform the picture
test. Check the colour pattern on the screen to see if the
problem still exists.
•
Yes: If the test pattern does not appear or there
is noise in the test pattern, select Yes. Therefore,
contact Samsung’s call centre for assistance.
•
No: If the test pattern is properly displayed, select
No. There may be a problem with your external
equipment. Please check your connections. If the
problem still persists, refer to the external device’s
user manual.
■
■
If you hear no sound from the
TV’s speakers, before performing
the sound test, make sure
Speaker Select is set to TV
speaker in the Sound menu.
■
Sound Test
If you think you have a sound problem, please perform the
sound test. You can check the sound by playing a built-in
melody sound through the TV.
‘Does the problem still exist with this sound test?’ appears
on the screen.
The melody will be heard during
the test even if Speaker Select
is set to External Speaker or the
sound is muted by pressing the
MUTE button.
•
Yes: If during the sound test you can hear sound only
from one speaker or not at all, select Yes. Therefore,
contact Samsung’s call centre for assistance.
•
No: If you can hear sound from the speakers, select
No. There may be a problem with your external
equipment. Please check your connections. If the
problem still persists, refer to the external device’s
user manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Support
Option
Description
ꢁ1
■
Signal Information (digital channels only)
Self Diagnosis
Unlike analogue channels, which can vary in reception
quality from ‘snowy’ to clear, digital (HDTV) channels have
either perfect reception quality or you will not receive them
at all. So, unlike analogue channels, you cannot fine tune
a digital channel. You can, however, adjust your antenna to
improve the reception of available digital channels.
■
If the signal strength meter
indicates that the signal is weak,
physically adjust your antenna
to increase the signal strength.
Continue to adjust the antenna
until you find the best position
with the strongest signal.
To keep your product up-to-date with new Digital Television
features then software upgrades are periodically broadcast
as part of the normal Television signal. It will automatically
detect these signals and display the software upgrade
banner. You are given the option to install the upgrade.
Software Upgrade
■
By USB
Insert a USB drive containing the firmware upgrade
downloaded from samsung.com into the TV. Please be
careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The TV will turn
off and turn on automatically after completing the firmware
upgrade. Please check the firmware version after the
upgrades are complete (the new version will have a
higher number than the older version). When software is
upgraded, video and audio settings you have made will
return to their default (factory) settings. We recommend you
write down your settings so that you can easily reset
TV Rear Panel
them after the upgrade.
USB Drive
■
By Channel
Upgrades the software using the broadcasting signal.
Standby Mode Upgrade
■
To continue software upgrade with master power on,
Select On by pressing the ▲ or ▼ button. 45 minutes after
entering standby mode, a manual upgrade is automatically
conducted. Since the power of the unit is turned on
internally, the screen may be on slightly for the LCD
product. This phenomenon may continue for more than 1
hour until the software upgrade is completed.
■
Alternative Software
To display the software version information.
❑
HD Connection Guide
This menu presents the connection method that provides
the optimal quality for the HD TV. Refer to this information
when connecting external devices to the TV.
❑
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can view
the information regarding the call centre, product and
software file download method.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢀ
+
Anynet
+
Connecting Anynet Devices
+
What is Anynet ?
+
+
Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV’s remote.
+
+
The Anynet system can be used only with Samsung devices that have the Anynet feature. To be sure your Samsung device has this
+
feature, check if there is an Anynet logo on it.
To connect to a TV
+
+
Anynet
Device 1
Anynet
Device 2
Anynet+
Device 3
TV
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
To connect to Home Theatre
TV
+
Home Theatre
Anynet Device 1
HDMI 1.3
Cable
HDMI 1.3 Cable
Optical Cable
+
+
Anynet Device 3
Anynet Device 2
HDMI 1.3 Cable
HDMI 1.3 Cable
Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
1
2
HDMI cable.
+
Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet device using an HDMI
cable.
■
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on
the Home Theatre.
■
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable / Satellite Box (ie Anynet Device 1 or 2) directly to
the Amplifier or Home Theatre, not the TV.
■
■
■
■
Connect only one Home Theatre.
+
+
You can connect an Anynet device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet functions.
+
+
Anynet works when the AV device supporting Anynet is in the Standby or On status.
+
Anynet supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Download from Www.Somanuals.com. All Manuals Search And Download.
+
Setting Up Anynet
ꢁꢁ
Option
Description
+
■
Anynet (HDMI-CEC)
Setup
■
Press the TOOLS button to
display the Tools menu. You
can also display Anynet+ menu
by selecting Tools → Anynet+
(HDMI-CEC).
+
+
To use the Anynet Function, Anynet (HDMI-CEC) must
be set to On.
+
When the Anynet (HDMI-CEC) function is disabled, all
+
the Anynet related operations are deactivated.
■
Auto Turn Off
Setting an Anynet+ Device to turn Off automatically when
the TV is turned Off.
Anynet+(HDMI-CEC)
►
•
The active source on the TV remote must be set
to TV to use the Anynet function.
+
•
If you set Auto Turn Off to Yes, connected
external devices are also turned off when the
TV is turned off. If an external device is still
recording, it may or may not turn off.
Device List
Setup
U
Move
E
Enter
R
R
Return
Setup
Anynet+ (HDMI-CEC)
Auto Turn Off
: On
: Yes
U
Move
E
Enter
Return
+
Switching between Anynet
Devices
+
Press the TOOLS button. Press the ENTER
CEC).
E
button to select Anynet (HDMI-
button.
1
2
View TV
Press the ▲ or ▼ button to select Device List, then press the ENTER
E
Device List
Record
+
■
Anynet devices connected to the TV are listed. If you cannot find a device
you want, press the red button to scan for devices.
:
DVDR
On
DVDR Operation
Receiver
:
Press the ▲ or ▼ button to select to a particular device and press the ENTER
E
Setup
3
button. It is switched to the selected device.
U
Move
E
Enter
R
Return
■
■
■
■
Switching to the selected devices may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of
connected devices.
When the device scan is complete, the number of devices found are not
displayed.
Although the TV automatically searches the device list when the TV is turned
on via the power button, devices connected to the TV may not always be
automatically displayed in the device list. Press the Red button to search for
the connected device.
■
Only when you set Anynet+
(HDMI-CEC) to On in the Setup
menu, the Device List menu
appears.
■
If you have selected external input mode by pressing the SOURCE button,
you cannot use the Anynet function. Make sure to switch to an Anynet
+
+
device by using the Device List.
Download from Www.Somanuals.com. All Manuals Search And Download.
+
Anynet Menu
ꢁꢂ
+
+
The Anynet menu changes depending on the type and status of the Anynet devices
connected to the TV.
Option
Description
Anynet mode changes to TV broadcast mode.
+
View TV
■
If more than one recording
device is connected, they are
displayed as (*recorder) and
if only one recording device is
connected, it will be represented
as (*device_name).
+
Device List
Shows the Anynet device list.
(device_name) MENU
Shows the connected device menus.
E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
(device_name) Operation
Shows the play menu of the connected device.
E.g. If a DVD recorder is connected, the play menu of the
DVD recorder will appear.
Recording: (*recorder)
Starts recording immediately using the recorder.
(This is only available for devices that support the
recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
+
TV Remote Control Buttons Available in Anynet Mode
Device Type
Operating Status
Available Buttons
Numeric buttons
▲/▼/◄/►/
ENTER
Colour buttons
EXIT button
After switching to the device,
when the menu of the
corresponding device is displayed
on the screen.
E
buttons
+
Anynet Device
π
μ
∫
∑
(Backward search)
(Forward search)
After switching to the device,
while playing a file
(Stop) /
(Pause)
∂(Play)
After switching to the device,
when you are watching a TV
programme
Device with built-in
Tuner
P
>
/ P
<
button
Audio Device
When Receiver is activated
Y
/ MUTE button
+
■
The Anynet function only works when the active source on the TV remote control is set
to TV.
■
■
The
∏
button works only while in the recordable state.
+
You cannot control Anynet devices using the buttons on the TV.
You can control Anynet devices only using the TV remote control.
+
■
The TV remote control may not work under certain conditions.
If this occurs, reselect the Anynet+ device.
+
■
■
The Anynet functions do not operate with other manufacturers’ products.
The operations may differ depending on the device.
π
,
μ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
ꢁꢃ
You can make a recording of a TV programme using a Samsung recorder.
+
Press the TOOLS button. Press the ENTER
CEC).
E
button to select Anynet (HDMI-
1
2
View TV
Device List
Record
Press the ▲ or ▼ button to select Recording Immediately and press the
ENTER button. Recording begins.
:
DVDR
E
DVDR Operation
Receiver
■
When there is more than one recording device.
When multiple recording devices are connected, the recording devices are
listed. Press the ▲ or ▼ button to select a recording device and press the
:
On
Setup
U
Move
E
Enter
R
Return
ENTERE
button. Recording begins.
■
When the recording device is not displayed.
Select Device List and press the Red button to search devices
Press the EXIT button to exit.
■
■
You can record the source streams by selecting Record: (device_name).
3
Pressing the button will record whatever you are currently watching. If you
∏
are watching video from another device, the video from the device is recorded.
■
Before recording, check whether the antenna jack is properly connected to the
recording device. To properly connect an antenna to a recording device, refer
to the recording device’s users manual.
Listening through a Receiver
(Home Theatre)
You can listen to sound through a receiver instead of the TV speaker.
+
button to select Anynet (HDMI-
Press the TOOLS button. Press the ENTER
CEC).
E
1
2
3
Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select
On or Off.
Press the EXIT button to exit.
■
■
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of
the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
■
■
When the receiver (home theatre) is set to On, you can hear sound output
from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the
TV will send out 5.1 channel sound to the Home theatre receiver. When the
source is a digital component such as a DVD and is connected to the TV via
HDMI, only 2 channel sound will be heard from the Home Theatre receiver.
If there is a power interruption to the TV when the Receiver is set to On (by
disconnecting the power cord or a power failure), the Speaker Select may be
set to External Speaker when you turn the TV on again. (Refer to page 25)
Download from Www.Somanuals.com. All Manuals Search And Download.
+
Troubleshooting for Anynet
ꢁꢄ
Problem
Possible Solution
+
+
+
+
Anynet does not work.
●
●
●
●
●
●
●
●
●
Check if the device is an Anynet device. The Anynet system supports Anynet devices only.
Connect only one receiver (home theatre).
+
Check if the Anynet device power cord is properly connected.
Check the Anynet device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet (HDMI-CEC) is set to On in the Anynet setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet exclusive remote control.
Anynet doesn’t work in certain situations. (Searching channels, Operating Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or
turn your TV off and on again.
Check if the Anynet Function of Anynet device is set on.
+
+
+
+
+
+
+
●
+
+
+
I want to start Anynet .
●
●
Check if the Anynet device is properly connected to the TV and check if the Anynet (HDMI-
+
CEC) is set to On in the Anynet Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to
show the Anynet menu and select a menu you want.
+
+
I want to exit Anynet+.
●
●
Select View TV in the Anynet menu.
+
Press the SOURCE button on the TV remote control and select a device other than Anynet
devices.
●
●
Press P
>
/
<
to change the TV mode. (Note that the channel button operates only when a
+
tuner-embedded Anynet device is not connected.)
+
The message ‘Connecting to
Anynet device...’ appears on
the screen.
You cannot use the remote control when you are configuring Anynet or switching to a view
mode.
Use the remote control when the Anynet setting or switching to view mode is complete.
+
+
●
●
+
The Anynet device does not
You cannot use the play function when Plug & Play is in progress.
play.
+
The connected device is not
displayed.
●
●
●
●
●
Check whether or not the device supports Anynet functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet (HDMI-CEC) is set to On in the Anynet setup menu.
+
+
+
Search Anynet devices again.
+
You can connect an Anynet device using the HDMI 1.3 cable only. Some HDMI cables may not
+
support Anynet functions.
●
●
●
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord
or a power failure, please repeat the device scan.
The TV programme cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢅ
Other Information
Teletext Feature
Most television stations provide written information services via Teletext. The index page of the Teletext service gives you information
on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
■
For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some
pages may not be displayed.
1 0 (mode)
Press to select the Teletext mode (LIST/FLOF). If you press it in the LIST mode, it switches
into the List save mode. In the List save mode, you can save Teletext page into list using the
(store) button.
2 8 (store)
Used to store the Teletext pages.
3 4 (size)
Press to display the double-size letters in the upper half of the screen. For lower half of the
7
8
screen, press it again. To display normal screen, press it once again.
4 5 (reveal)
8
9
Used to display the hidden text (answers to quiz games, for example). To display normal
screen, press it again.
1
5
Colour buttons (red/green/yellow/blue)
0
If the FASTEXT system is used by a broadcasting company, the different topics covered
on a Teletext page are colour-coded and can be selected by pressing the coloured buttons.
Press one of them corresponding to the required. The page is displayed with other coloured
information that can be selected in the same way. To display the previous or next page, press
the corresponding coloured button.
2
3
@
!
6 / (Teletext on/mix)
Press to activate Teletext mode after selecting the channel providing the Teletext service.
Press it twice to overlap the Teletext with the current broadcasting screen.
7 : (exit)
4
#
5
6
Exit from the Teletext display.
8 1 (sub-page)
I-II
Used to display the available sub-page.
9 2 (page up)
Used to display the next Teletext page.
0 3 (page down)
Used to display the previous Teletext page.
! 6 (index)
■
You can change Teletext
pages by pressing the
numeric buttons on the
remote control.
Used to display the index (contents) page at any time while you are viewing Teletext.
@ 9 (hold)
Used to hold the display on a given page if the selected page is linked with several
secondary pages which follow on automatically. To resume, press it again.
# 7 (cancel)
Used to display the broadcast when searching for a page.
The Teletext pages are organized according to six categories:
Part
A
B
C
D
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
E
F
Text.
Status information.
FASTEXT information.
■
■
Teletext information is often divided between several pages displayed in sequence, which can
be accessed by:
•
•
•
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
Teletext level supported by the TV is version 2.5 which is capable of displaying additional
graphics or text.
■
■
■
Depending upon the transmission, blank side panels can occur when displaying Teletext.
In these cases, additional graphics or text is not transmitted.
Older TV’s which do not support version 2.5 are not capable of displaying any additional
graphics or text, regardless of the Teletext transmission.
Teletext 16:9, picture is 16:9
■
Press the TV button to exit
from the Teletext display.
■
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your TV as a Computer (PC) Display
ꢁꢆ
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending
upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic
set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
First, click on ‘Control Panel’ on the Windows start menu.
1
When the control panel window appears, click on ‘Appearance and Themes’ and a display
2
3
4
dialog-box will appear.
When the control panel window appears, click on ‘Display’ and a display dialogbox will
appear.
Navigate to the ‘Settings’ tab on the display dialog-box.
■
■
The correct size setting (resolution) - Optimum: 1920 X 1080 pixels.
If a vertical-frequency option exists on your display settings dialog box, the correct
value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t
equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display
modes listed on the next page, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
Horizontal Frequency Vertical Frequency
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
Mode
IBM
Resolution
(KHz)
(Hz)
640 x 350
720 x 400
31.469
70.086
25.175
+/-
31.469
70.087
28.322
-/+
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 720
1280 x 960
35.000
49.726
68.681
35.910
53.783
44.772
56.456
75.231
66.667
74.551
75.062
59.950
59.959
59.855
74.777
74.857
30.240
57.284
100.000
32.750
81.750
74.500
95.750
130.000
-/-
-/-
-/-
-/+
-/+
-/+
-/+
-/+
MAC
VESA CVT
640 x 480
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-
640 x 480
-/-
640 x 480
-/-
800 x 600
+/+
+/+
+/+
-/-
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
-/-
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA DMT
1280 x 720
52.500
70.000
89.040
-/+
VESA GTF
1280 x 1024
74.620
70.000
128.943
-/-
VESA DMT /
DTV CEA
1920 x 1080p
67.500
60.000
148.500
+/+
■
■
■
■
■
When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080 or 1600x1200).
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting: Before Contacting Service
Personnel
ꢁꢇ
No sound or picture
●
●
●
●
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the button on your set.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
●
●
●
Check the volume.
Check whether the MUTE
Check the Speaker Select settings.
M
button has been pressed on the remote control.
Screen is black and power
indicator light blinks steadily
●
●
●
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
No picture or black and white
picture
●
●
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference
●
●
Try to identify the electrical appliance that is affecting the set and move it further away.
Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
●
●
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
●
●
●
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
‘Check signal cable.’ message is
displayed
●
●
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, ‘Not Supported
Mode.’ message is displayed
●
●
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The damaged picture appears in
the corner of the screen
●
If Screen Fit is selected in some external devices, the damaged picture may appear in
the corner of the screen. This symptom is caused by external devices, not TV.
The ‘Resets all settings to
the default values.’ message
appears.
●
This appears when you press and hold the EXIT button for a while. The product settings
are reset to the factory defaults.
You may see small particles if
you look closely at the edge of
the bezel surrounding the TV
screen.
●
This is part of the product’s design and is not a defect.
■
This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
ꢂ0
Model Name
LE32B530, LE32B541
LE37B530
37 inches
<1W
LE40B530, LE40B541
40 inches
LE46B530
46 inches
<1W
Screen Size
(Diagonal)
32 inches
<1W
Power Consumption
Standby
<1W
PC Resolution
(Optimum)
1920 x 1080 @ 60 Hz
10W x 2
1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz
Sound
(Output)
10W x 2
10W x 2
10W x 2
Dimensions (WxDxH)
Body
With stand
801 X 77 X 518 mm
801 X 220 X 562 mm
918 X 77 X 597 mm
918 X 300 X 650 mm 998 X 260 X 686 mm 1127 X 260 X 766 mm
998 X 78 X 621 mm
1127 X 78 X 712 mm
Weight
With Stand
12 kg
15 kg
18 kg
24 kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel
Left / Right
-20˚ ~ 20˚
■
■
■
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
This symbol alerts you that important literature
DO NOT REMOVE COVER (OR BACK). THERE ARE
concerning operation and maintenance has been
included with this product.
NO USER SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
●
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or
covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
Give your product 10 cm (4 inch) clearance from the wall.
●
●
●
●
Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the product.
Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer
immediately. Make sure to pull out the power cord from the outlet before cleaning.
●
This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly
under environmental considerations. Please contact your local authorities for disposal or recycling information.
●
●
Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
●
●
To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to
the local electrical supply.
●
●
●
Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug
when pulling the plug from the outlet. Do not touch the power cord with wet hands.
●
●
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
unplug it immediately and contact an authorized dealer or service centre.
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period
of time (especially when children, elderly or disabled people will be left alone in the house).
Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat
or the insulation to deteriorate.
●
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures,high
humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may
cause serious damage to your set.
●
●
Use only a properly grounded plug and receptacle.
An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be
readily operable.
●
●
●
●
Do not allow children to hang onto the product.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.
WARNING - TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES OR OTHER OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same
colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should
obtain a suitabl y approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the
plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured
BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
UNITED KINGDOM
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials
and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was
purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty
on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available
from:
Samsung Electronics U.K. Ltd.
Customer Care Centre
PO Box 17243
Edinburgh, EH11 4YB
United Kingdom
Tel: 0845 SAMSUNG (7267864) (UK & Northern Ireland)
Tel: 0818 717 100 (EIRE Only)
Fax: +44 0845 650 8080
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented
with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement will be
made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such
repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to
conform to national or local technical or safety standards in force in any Country other than the one for which the product was
originally designed and manufactured.
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories
or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details
of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes
for disposal.
[English]
Les bons gestes de mise au rebut de ce produit (Déchets d’équipements électriques et électroniques)
(Applicable dans les pays de l’Union Européenne et dans d’autres pays européens pratiquant le tri sélectif)
Ce symbole sur le produit, ses accessoires ou sa documentation indique que ni le produit, ni ses accessoires électroniques usagés
(chargeur, casque audio, câble USB, etc.) ne peuvent être jetés avec les autres déchets ménagers. La mise au rebut incontrôlée des
déchets présentant des risques environnementaux et de santé publique, veuillez séparer vos produits et accessoires usagés des autres
déchets. Vous favoriserez ainsi le recyclage de la matière qui les compose dans le cadre d’un développement durable. Les particuliers sont
invités à contacter le magasin leur ayant vendu le produit ou à se renseigner auprès des autorités locales pour connaître les procédures et
les points de collecte de ces produits en vue de leur recyclage. Les entreprises et professionnels sont invités à contacter leurs fournisseurs
et à consulter les conditions de leur contrat de vente. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets
professionnels et commerciaux.
[Français]
Korrekte Entsorgung von Altgeräten (Elektroschrott)
(In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem)
Die Kennzeichnung auf dem Produkt, Zubehörteilen bzw. auf der dazugehörigen Dokumentation gibt an, dass das Produkt und Zubehörteile
(z. B. Ladegerät, Kopfhörer, USB-Kabel) nach ihrer Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden dürfen.
Entsorgen Sie dieses Gerät und Zubehörteile bitte getrennt von anderen Abfällen, um der Umwelt bzw. der menschlichen Gesundheit
nicht durch unkontrollierte Müllbeseitigung zu schaden. Helfen Sie mit, das Altgerät und Zubehörteile fachgerecht zu entsorgen, um die
nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern. Private Nutzer wenden sich an den Händler, bei dem das Produkt
gekauft wurde, oder kontaktieren die zuständigen Behörden, um in Erfahrung zu bringen, wo Sie das Altgerät bzw. Zubehörteile für eine
umweltfreundliche Entsorgung abgeben können. Gewerbliche Nutzer wenden sich an ihren Lieferanten und gehen nach den Bedingungen
des Verkaufsvertrags vor. Dieses Produkt und elektronische Zubehörteile dürfen nicht zusammen mit anderem Gewerbemüll entsorgt
werden.
[Deutsch]
Correcte verwijdering van dit product (elektrische & elektronische afvalapparatuur)
Dit merkteken op het product, de accessoires of het informatiemateriaal duidt erop dat het product en zijn elektronische accessoires (bv.
lader, headset, USB-kabel) niet met ander huishoudelijk afval verwijderd mogen worden aan het einde van hun gebruiksduur. Om mogelijke
schade aan het milieu of de menselijke gezondheid door ongecontroleerde afvalverwijdering te voorkomen, moet u deze artikelen van
andere soorten afval scheiden en op een verantwoorde manier recyclen, zodat het duurzame hergebruik van materiaalbronnen wordt
bevorderd. Huishoudelijke gebruikers moeten contact opnemen met de winkel waar ze dit product hebben gekocht of met de gemeente
waar ze wonen om te vernemen waar en hoe ze deze artikelen milieuvriendelijk kunnen laten recyclen. Zakelijke gebruikers moeten
contact opnemen met hun leverancier en de algemene voorwaarden van de koopovereenkomst nalezen. Dit product en zijn elektronische
accessoires mogen niet met ander bedrijfsafval voor verwijdering worden gemengd.
[Nederlands]
Corretto smaltimento del prodotto (rifiuti elettrici ed elettronici)
(Applicabile nell’Unione Europea e in altri paesi europei con sistema di raccolta differenziata)
Il marchio riportato sul prodotto, sugli accessori o sulla documentazione indica che il prodotto e i relativi accessori elettronici (quali
caricabatterie, cuffia e cavo USB) non devono essere smaltiti con altri rifiuti domestici al termine del ciclo di vita. Per evitare eventuali danni
all’ambiente o alla salute causati dall’inopportuno smaltimento dei rifiuti, si invita l’utente a separare il prodotto e i suddetti accessori da altri
tipi di rifiuti e di riciclarli in maniera responsabile per favorire il riutilizzo sostenibile delle risorse materiali. Gli utenti domestici sono invitati a
contattare il rivenditore presso il quale è stato acquistato il prodotto o l’ufficio locale preposto per tutte le informazioni relative alla raccolta
differenziata e al riciclaggio per questo tipo di materiali. Gli utenti aziendali sono invitati a contattare il proprio fornitore e verificare i termini
e le condizioni del contratto di acquisto. Questo prodotto e i relativi accessori elettronici non devono essere smaltiti unitamente ad altri rifiuti
commerciali.
[Italiano]
Eliminación correcta de este producto (Residuos de aparatos eléctricos y electrónicos)
(Aplicable en la Unión Europea y en países europeos con sistemas de recogida selectiva de residuos)
La presencia de este símbolo en el producto, accesorios o material informativo que lo acompañan, indica que al finalizar su vida útil ni el
producto ni sus accesorios electrónicos (como el cargador, cascos, cable USB) deberán eliminarse junto con otros residuos domésticos.
Para evitar los posibles daños al medio ambiente o a la salud humana que representa la eliminación incontrolada de residuos, separe
estos productos de otros tipos de residuos y recíclelos correctamente. De esta forma se promueve la reutilización sostenible de recursos
materiales. Los usuarios particulares pueden contactar con el establecimiento donde adquirieron el producto o con las autoridades locales
pertinentes para informarse sobre cómo y dónde pueden llevarlo para que sea sometido a un reciclaje ecológico y seguro. Los usuarios
comerciales pueden contactar con su proveedor y consultar las condiciones del contrato de compra. Este producto y sus accesorios
electrónicos no deben eliminarse junto a otros residuos comerciales.
[Español]
Eliminação Correcta Deste Produto (Resíduos de Equipamentos Eléctricos e Electrónicos)
Esta marca apresentada no produto, nos acessórios ou na literatura – indica que o produto e os seus acessórios electrónicos (por exemplo,
o carregador, o auricular, o cabo USB) não deverão ser eliminados juntamente com os resíduos domésticos no final do seu período de
vida útil. Para impedir danos ao ambiente ou à saúde humana causados pela eliminação incontrolada de resíduos, deverá separar estes
equipamentos de outros tipos de resíduos e reciclá-los de forma responsável, para promover uma reutilização sustentável dos recursos
materiais. Os utilizadores domésticos deverão contactar o estabelecimento onde adquiriram este produto ou as entidades oficiais locais
para obterem informações sobre onde e de que forma podem entregar estes equipamentos para permitir efectuar uma reciclagem segura
em termos ambientais. Os utilizadores profissionais deverão contactar o seu fornecedor e consultar os termos e condições do contrato de
compra. Este produto e os seus acessórios electrónicos não deverão ser misturados com outros resíduos comerciais para eliminação.
[Português]
Download from Www.Somanuals.com. All Manuals Search And Download.
Korrekt avfallshantering av produkten (elektriska och elektroniska produkter)
Denna markering på produkten, tillbehören och i manualen anger att produkten och de elektroniska tillbehören (t.ex. laddare, headset,
USB-kabel) inte bör sorteras tillsammans med annat hushållsavfall när de kasseras. Till förebyggande av skada på miljö och hälsa bör
dessa föremål hanteras separat för ändamålsenlig återvinning av beståndsdelarna. Hushållsanvändare bör kontakta den återförsäljare
som sålt produkten eller sin kommun för vidare information om var och hur produkten och tillbehören kan återvinnas på ett miljösäkert sätt.
Företagsanvändare bör kontakta leverantören samt verifiera angivna villkor i köpekontraktet. Produkten och de elektroniska tillbehören bör
inte hanteras tillsammans med annat kommersiellt avfall.
[Svenska]
Korrekt affaldsbortskaffelse af dette produkt (elektrisk & elektronisk udstyr)
Mærket på dette produkt, på tilbehør eller i den medfølgende dokumentation betyder, at produktet og elektronisk tilbehør hertil (f.eks.
oplader, hovedsæt, USB-ledning) ikke må bortskaffes sammen med almindeligt husholdningsaffald efter endt levetid. For at undgå skadelige
miljø- eller sundhedspåvirkninger på grund af ukontrolleret affaldsbortskaffelse skal ovennævnte bortskaffes særskilt fra andet affald og
indleveres behørigt til fremme for bæredygtig materialegenvinding. Forbrugere bedes kontakte forhandleren, hvor de har købt produktet,
eller kommunen for oplysning om, hvor og hvordan de kan indlevere ovennævnte med henblik på miljøforsvarlig genvinding. Virksomheder
bedes kontakte leverandøren og læse betingelserne og vilkårene i købekontrakten. Dette produkt og elektronisk tilbehør hertil bør ikke
bortskaffes sammen med andet erhvervsaffald.
[Dansk]
Korrekt avhending av dette produktet (Avfall fra elektrisk og elektronisk utstyr)
Denne merkingen som vises på produktet, dets tilbehør eller dokumentasjon, indikerer at produktet eller det elektroniske tilbehøret (for
eksempel lader, headset, USB-kabel) ikke skal kastes sammen med annet husholdningsavfall ved slutten av levetiden. For å hindre
potensiell skade på miljøet eller helseskader grunnet ukontrollert avfallsavhending ber vi om at dette avfallet holdes adskilt fra andre
typer avfall og resirkuleres på ansvarlig måte for å fremme bærekraftig gjenbruk av materielle ressurser. Private forbrukere bør kontakte
enten forhandleren de kjøpte produktet av, eller lokale myndigheter, for detaljer om hvor og hvordan disse artiklene kan resirkuleres på
en miljøvennlig måte. Forretningsbrukere bør kontakte sin leverandør og undersøke vilkårene i kjøpskontrakten. Dette produktet og det
elektroniske tilbehøret skal ikke blandes med annet kommersielt avfall som skal kastes.
[Norsk]
Tuotteen turvallinen hävittäminen (elektroniikka ja sähkölaitteet)
Oheinen merkintä tuotteessa, lisävarusteissa tai käyttöohjeessa merkitsee, että tuotetta tai lisävarusteina toimitettavia sähkölaitteita (esim.
laturia, kuulokkeita tai USB kaapelia) ei saa hävittää kotitalousjätteen mukana niiden käyttöiän päätyttyä. Virheellisestä jätteenkäsittelystä
ympäristölle ja terveydelle aiheutuvien haittojen välttämiseksi tuote ja lisävarusteet on eroteltava muusta jätteestä ja kierrätettävä
kestävän kehityksen mukaista uusiokäyttöä varten. Kotikäyttäjät saavat lisätietoja tuotteen ja lisävarusteiden turvallisesta kierrätyksestä
ottamalla yhteyttä tuotteen myyneeseen jälleenmyyjään tai paikalliseen ympäristöviranomaiseen. Yrityskäyttäjien tulee ottaa yhteyttä
tavarantoimittajaan ja selvittää hankintasopimuksen ehdot. Tuotetta tai sen lisävarusteita ei saa hävittää muun kaupallisen jätteen seassa.
[Suomi]
A termék hulladékba helyezésének módszere(WEEE – Elektromos és elektronikus berendezések hulladékai)
Ez a jelzés a terméken, tartozékain vagy dokumentációján arra utal, hogy hasznos élettartama végén a terméket és elektronikus tartozékait
(pl. töltőegység, fejhallgató, USB kábel) nem szabad a háztartási hulladékkal együtt kidobni. A szabálytalan hulladékba helyezés által
okozott környezet- és egészségkárosodás megelőzése érdekében ezeket a tárgyakat különítse el a többi hulladéktól, és felelősségteljesen
gondoskodjon az újrahasznosításukról az anyagi erőforrások fenntartható újrafelhasználásának elősegítése érdekében. A háztartási
felhasználók a termék forgalmazójától vagy a helyi önkormányzati szervektől kérjenek tanácsot arra vonatkozóan, hová és hogyan vihetik
el az elhasznált termékeket a környezetvédelmi szempontból biztonságos újrahasznosítás céljából. Az üzleti felhasználók lépjenek
kapcsolatba beszállítójukkal, és vizsgálják meg az adásvételi szerződés feltételeit. Ezt a terméket és tartozékait nem szabad az egyéb
közületi hulladékkal együtt kezelni.
[Magyar]
Prawidłowe usuwanie produktu (zużyty sprzęt elektryczny i elektroniczny)
To oznaczenie umieszczone na produkcie, akcesoriach lub dokumentacji oznacza, że po zakończeniu eksploatacji nie należy tego produktu
ani jego akcesoriów (np. ładowarki, zestawu słuchawkowego, przewodu USB) wyrzucać wraz ze zwykłymi odpadami gospodarstwa
domowego. Aby uniknąć szkodliwego wpływu na środowisko naturalne i zdrowie ludzi wskutek niekontrolowanego usuwania odpadów,
prosimy o oddzielenie tych przedmiotów od odpadów innego typu oraz o odpowiedzialny recykling i praktykowanie ponownego
wykorzystania materiałów. W celu uzyskania informacji na temat miejsca i sposobu bezpiecznego dla środowiska recyklingu tych
przedmiotów, użytkownicy w gospodarstwach domowych powinni skontaktować się z punktem sprzedaży detalicznej, w którym dokonali
zakupu produktu, lub z organem władz lokalnych. Użytkownicy w firmach powinni skontaktować się ze swoim dostawcą i sprawdzić warunki
umowy zakupu. Produktu ani jego akcesoriów nie należy usuwać razem z innymi odpadami komercyjnymi.
[Polski]
Σωστή Απόρριψη αυτού του Προϊόντος (Απόβλητα Ηλεκτρικού & Ηλεκτρονικού Εξοπλισμού)
(Ισχύει για την Ευρωπαϊκή Ένωση και για άλλες ευρωπαϊκές χώρες με χωριστά συστήματα συλλογής) Αυτό το σήμα που εμφανίζεται επάνω
στο προϊόν, στα εξαρτήματά του ή στα εγχειρίδια που το συνοδεύουν, υποδεικνύει ότι το προϊόν και τα ηλεκτρονικά του εξαρτήματα (π.χ.
φορτιστής, ακουστικά, καλώδιο USB) δεν θα πρέπει να ρίπτονται μαζί με τα υπόλοιπα οικιακά απορρίμματα μετά το τέλος του κύκλου ζωής
τους. Προκειμένου να αποφευχθούν ενδεχόμενες βλαβερές συνέπειες στο περιβάλλον ή την υγεία εξαιτίας της ανεξέλεγκτης διάθεσης
απορριμμάτων, σας παρακαλούμε να διαχωρίσετε αυτά τα προϊόντα από άλλους τύπους απορριμμάτων και να τα ανακυκλώσετε, ώστε
να βοηθήσετε στην βιώσιμη επαναχρησιμοποίηση των υλικών πόρων. Οι οικιακοί χρήστες θα πρέπει να έλθουν σε επικοινωνία είτε με
το κατάστημα απ’ όπου αγόρασαν αυτό το προϊόν, είτε με τις κατά τόπους υπηρεσίες, προκειμένου να πληροφορηθούν τις λεπτομέρειες
σχετικά με τον τόπο και τον τρόπο με τον οποίο μπορούν να δώσουν αυτά τα προϊόντα για ασφαλή προς το περιβάλλον ανακύκλωση.
Οι επιχειρήσεις-χρήστες θα πρέπει να έλθουν σε επαφή με τον προμηθευτή τους και να ελέγξουν τους όρους και τις προϋποθέσεις του
συμβολαίου αγοράς. Αυτό το προϊόν και τα ηλεκτρονικά του εξαρτήματα δεν θα πρέπει να αναμιγνύονται με άλλα συνηθισμένα απορρίμματα
προς διάθεση.
[Ελληνικά]
Download from Www.Somanuals.com. All Manuals Search And Download.
Правилно третиране на изделието след края на експлоатационния му живот
(Отпадъци, представляващи електрическо и електронно оборудване)(Важи за държавите на Европейския съюз и други европейски
държави със системи за разделно сметосъбиране)
Този знак, поставен върху изделието, негови принадлежности или печатни материали, означава, че продуктът и принадлежностите
(например зарядно устройство, слушалки, USB кабел) не бива да се изхвърлят заедно с другите битови отпадъци, когато изтече
експлоатационният му живот. Отделяйте тези устройства от другите видови отпадъци и ги предавайте за рециклиране. Спазвайки
това правило не излагате на опасност здравето на други хора и предпазвате околната среда от замърсяване, предизвикано от
безконтролно изхвърляне на отпадъци. Освен това, подобно отговорно поведение създава възможност за повторно (екологично
съобразно) използване на материалните ресурси. Домашните потребители трябва да се свържат с търговеца на дребно, от когото
са закупили изделието, или със съответната местна държавна агенция, за да получат подробни инструкции къде и кога могат
да занесат тези устройства за рециклиране, безопасно за околната среда. Корпоративните потребители следва да се свържат с
доставчика си и да проверят условията на договора за покупка. Това изделие и неговите електронни принадлежности не бива да се
сместват с другите отпадъци на търговското предприятие.
[Български]
Správná likvidace výrobku (Elektrický a elektronický odpad)
Toto označení na výrobku, jeho příslušenství nebo dokumentaci znamená, že výrobek a jeho elektronické příslušenství (například nabíječku,
náhlavní sadu, USB kabel) je po skončení životnosti zakázáno likvidovat jako běžný komunální odpad. Možným negativním dopadům na
životní prostředí nebo lidské zdraví způsobeným nekontrolovanou likvidací zabráníte oddělením zmíněných produktů od ostatních typů
odpadu a jejich zodpovědnou recyklací za účelem udržitelného využívání druhotných surovin. Uživatelé z řad domácností by si měli od
prodejce, u něhož produkt zakoupili, nebo u příslušného městského úřadu vyžádat informace, kde a jak mohou tyto výrobky odevzdat k
bezpečné ekologické recyklaci. Podnikoví uživatelé by měli kontaktovat dodavatele a zkontrolovat všechny podmínky kupní smlouvy. Tento
výrobek a jeho elektronické příslušenství nesmí být likvidován spolu s ostatním průmyslovým odpadem.
[Čeština]
Správna likvidácia tohoto výrobku (Elektrotechnický a elektronický odpad)
(Platné pre Európsku úniu a ostatné európske krajiny so systémom triedeného odpadu)
Toto označenie na výrobku, príslušenstve alebo v sprievodnej brožúre hovorí, že po skončení životnosti by produkt ani jeho elektronické
príslušenstvo (napr. nabíjačka, náhlavná súprava, USB kábel) nemali byť likvidované s ostatným domovým odpadom. Prípadnému
poškodeniu životného prostredia alebo ľudského zdravia môžete predísť tým, že budete tieto výrobky oddeľovať od ostatného odpadu a
vrátite ich na recykláciu. Používatelia v domácnostiach by pre podrobné informácie, ako ekologicky bezpečne naložiť s týmito výrobkami,
mali kontaktovať buď predajcu, ktorý im ich predal, alebo príslušný úrad v mieste ich bydliska. Priemyselní používatelia by mali kontaktovať
svojho dodávateľa a preveriť si podmienky kúpnej zmluvy. Tento výrobok a ani jeho elektronické príslušenstvo by nemali byť likvidované
spolu s ostatným priemyselným odpadom.
[Slovensky]
Cum se elimină corect acest produs (Deşeuri de echipamente electrice şi electronice)
(Aplicabil în ţările Uniunii Europene şi în alte ţări cu sisteme de colectare selectivă)
Acest simbol de pe produs, accesorii şi documentaţie indică faptul că produsul şi accesoriile sale electronice (încărcător, căşti, cablu USB)
nu trebuie eliminate împreună cu alte deşeuri menajere la finalul duratei lor de utilizare. Dat fiind că eliminarea necontrolată a deşeurilor
poate dăuna mediului înconjurător sau sănătăţii umane, vă rugăm să separaţi aceste articole de alte tipuri de deşeuri şi să le reciclaţi în
mod responsabil, promovând astfel reutilizarea durabilă a resurselor materiale. Utilizatorii casnici trebuie să-l contacteze pe distribuitorul
care le-a vândut produsul sau să se intereseze la autorităţile locale unde şi cum pot să ducă aceste articole pentru a fi reciclate în mod
ecologic. Utilizatorii comerciali trebuie să-şi contacteze furnizorul şi să consulte termenii şi condiţiile din contractul de achiziţie. Acest produs
şi accesoriile sale electronice nu trebuie eliminate împreună cu alte deşeuri comerciale.
[Română]
Izstrādājuma pareiza likvidēšana (Attiecas uz nolietotām elektriskām un elektroniskām ierīcēm)
(Spēkā Eiropas Savienībā un pārējās Eiropas valstīs, kas izmanto atkritumu dalītu savākšanu)
Šis uz izstrādājuma un tā piederumiem vai pievienotajā dokumentācijā izvietotais marķējums norāda, ka izstrādājumu un tā elektroniskos
piederumus (piem., uzlādes ierīci, austiņas, USB kabeli) pēc ekspluatācijas laika beigām nedrīkst likvidēt kopā ar citiem sadzīves
atkritumiem. Lai nepieļautu atkritumu nekontrolētas likvidēšanas radītu varbūtēju kaitējumu videi un cilvēku veselībai, lūdzam minētās ierīces
nošķirt no citiem atkritumiem un disciplinēti nodot pienācīgai pārstrādei, tā sekmējot materiālo resursu atkārtotu izmantošanu. Lai uzzinātu,
kur un kā minētās ierīces iespējams nodot ekoloģiski drošai pārstrādei, mājsaimniecībām jāsazinās ar izstrādājuma pārdevēju vai savu
pašvaldību. Iestādēm un uzņēmumiem jāsazinās ar izstrādājuma piegādātāju un jāiepazīstas ar pirkuma līguma nosacījumiem. Izstrādājumu
un tā elektroniskos piederumus nedrīkst nodot likvidēšanai kopā ar citiem iestāžu un uzņēmumu atkritumiem.
[Latviešu]
Tinkamas šio gaminio išmetimas (elektros ir elektroninės įrangos atliekos)
Šis ženklas, pateiktas ant gaminio, jo priedų ar dokumentacijoje, nurodo, kad gaminio ir jo elektroninių priedų (pvz., įkroviklio, ausinių,
USB kabelio) negalima išmesti kartu su kitomis buitinėmis atliekomis gaminio naudojimo laikui pasibaigus. Kad būtų išvengta galimos
nekontroliuojamo atliekų išmetimo žalos aplinkai arba žmonių sveikatai ir skatinamas aplinką tausojantis antrinių žaliavų panaudojimas,
atskirkite šiuos elementus nuo kitų rūšių atliekų ir atiduokite perdirbti. Informacijos kur ir kaip pristatyti šiuos elementus saugiai perdirbti,
privatūs vartotojai turėtų kreiptis į parduotuvę, kurioje šį gaminį pirko, arba į vietos valdžios institucijas. Verslo vartotojai turėtų kreiptis
į savo tiekėją ir peržiūrėti pirkimo sutarties sąlygas. Tvarkant atliekas, šio gaminio ir jo elektroninių priedų negalima maišyti su kitomis
pramoninėmis atliekomis.
[Lietuvių]
Download from Www.Somanuals.com. All Manuals Search And Download.
Õige viis toote kasutuselt kõrvaldamiseks (elektriliste ja elektrooniliste seadmete jäätmed)
Selline tähistus tootel või selle tarvikutel või dokumentidel näitab, et toodet ega selle elektroonilisi tarvikuid (nt laadija, peakomplekt, USB-
kaabel) ei tohi kasutusaja lõppemisel kõrvaldada koos muude olmejäätmetega. Selleks et vältida jäätmete kontrollimatu kõrvaldamisega
seotud võimaliku kahju tekitamist keskkonnale või inimeste tervisele ning edendada materiaalsete vahendite säästvat taaskasutust,
eraldage need esemed muudest jäätmetest ja suunake need vastutustundlikult taasringlusse. Kodukasutajad saavad teavet nende esemete
keskkonnaohutu ringlussevõtu kohta kas toote müüjalt või keskkonnaametist. Firmad peaksid võtma ühendust tarnijaga ning kontrollima
ostulepingu tingimusi ja sätteid. Toodet ega selle elektroonilisi tarvikuid ei tohi panna muude hävitamiseks mõeldud kaubandusjäätmete
hulka.
[Eesti]
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to
human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
[English]
Elimination des batteries de ce produit
(Applicable aux pays de l’Union européenne et aux autres pays européens dans lesquels des systèmes de collecte sélective sont mis en
place.)
Le symbole sur la batterie, le manuel ou l’emballage indique que les batteries de ce produit ne doivent pas être éliminées en fin de vie avec
les autres déchets ménagers. L’indication éventuelle des symboles chimiques Hg, Cd ou Pb signifie que la batterie contient des quantités de
mercure, de cadmium ou de plomb supérieures aux niveaux de référence stipulés dans la directive CE 2006/66. Si les batteries ne sont pas
correctement éliminées, ces substances peuvent porter préjudice à la santé humaine ou à l’environnement. Afin de protéger les ressources
naturelles et d’encourager la réutilisation du matériel, veillez à séparer les batteries des autres types de déchets et à les recycler via votre
système local de collecte gratuite des batteries.
[Français]
Korrekte Entsorgung der Batterien dieses Produkts
(In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Altbatterie-Rücknahmesystem)
Die Kennzeichnung auf der Batterie bzw. auf der dazugehörigen Dokumentation oder Verpackung gibt an, dass die Batterie zu diesem
Produkt nach seiner Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden darf. Wenn die Batterie mit den
chemischen Symbolen Hg, Cd oder Pb gekennzeichnet ist, liegt der Quecksilber-, Cadmium- oder Blei-Gehalt der Batterie über den in der
EG-Richtlinie 2006/66 festgelegten Referenzwerten. Wenn Batterien nicht ordnungsgemäß entsorgt werden, können sie der menschlichen
Gesundheit bzw. der Umwelt schaden. Bitte helfen Sie, die natürlichen Ressourcen zu schützen und die nachhaltige Wiederverwertung
von stofflichen Ressourcen zu fördern, indem Sie die Batterien von anderen Abfällen getrennt über Ihr örtliches kostenloses Altbatterie-
Rücknahmesystem entsorgen.
[Deutsch]
Correcte behandeling van een gebruikte accu uit dit product
(Van toepassing op de Europese Unie en andere Europese landen met afzonderlijke inzamelingssystemen voor accu’s en batterijen.)
Dit merkteken op de accu, handleiding of verpakking geeft aan dat de accu in dit product aan het einde van de levensduur niet samen met
ander huishoudelijk afval mag worden weggegooid. De chemische symbolen Hg, Cd of Pb geven aan dat het kwik-, cadmium- of loodgehalte
in de accu hoger is dan de referentieniveaus in de Richtlijn 2006/66/EC. Indien de gebruikte accu niet op de juiste wijze wordt behandeld,
kunnen deze stoffen schadelijk zijn voor de gezondheid van mensen of het milieu. Ter bescherming van de natuurlijke hulpbronnen en ter
bevordering van het hergebruik van materialen, verzoeken wij u afgedankte accu’s en batterijen te scheiden van andere soorten afval en
voor recycling aan te bieden bij het gratis inzamelingssysteem voor accu’s en batterijen in uw omgeving.
[Nederlands]
Corretto smaltimento delle batterie del prodotto
(Applicabile nei paesi dell’Unione Europea e in altri paesi europei con sistemi di conferimento differenziato delle batterie.)
Il marchio riportato sulla batteria o sulla sua documentazione o confezione indica che le batterie di questo prodotto non devono essere
smaltite con altri rifiuti domestici al termine del ciclo di vita. Dove raffigurati, i simboli chimici Hg, Cd o Pb indicano che la batteria contiene
mercurio, cadmio o piombo in quantità superiori ai livelli di riferimento della direttiva UE 2006/66. Se le batterie non vengono smaltite
correttamente, queste sostanze possono causare danni alla salute umana o all’ambiente. Per proteggere le risorse naturali e favorire il
riutilizzo dei materiali, separare le batterie dagli altri tipi di rifiuti e riciclarle utilizzando il sistema di conferimento gratuito previsto nella propria
area di residenza.
[Italiano]
Eliminación correcta de las baterías de este producto
(Aplicable en la Unión Europea y en otros países europeos con sistemas de recogida selectiva de baterías.)
La presencia de esta marca en las baterías, el manual o el paquete del producto indica que cuando haya finalizado la vida útil de las
baterías no deberán eliminarse junto con otros residuos domésticos. Los símbolos químicos Hg, Cd o Pb, si aparecen, indican que la batería
contiene mercurio, cadmio o plomo en niveles superiores a los valores de referencia admitidos por la Directiva 2006/66 de la Unión Europea.
Si las baterías no se desechan convenientemente, estas sustancias podrían provocar lesiones personales o dañar el medioambiente. Para
proteger los recursos naturales y promover el reciclaje, separe las baterías de los demás residuos y recíclelas mediante el sistema de
recogida gratuito de su localidad.
[Español]
Eliminação correcta das baterias existentes neste produto
(Aplicável na União Europeia e noutros países europeus com sistemas de recolha de baterias separados.)
Esta marca, apresentada na bateria, manual ou embalagem, indica que as baterias existentes neste produto não devem ser eliminadas
juntamente com os resíduos domésticos indiferenciados no final do seu período de vida útil. Onde existentes, os símbolos químicos Hg, Cd
ou Pb indicam que a bateria contém mercúrio, cádmio ou chumbo acima dos níveis de referência indicados na Directiva CE 2006/66. Se as
baterias não forem correctamente eliminadas, estas substâncias poderão ser prejudiciais para a saúde humana ou para o meio ambiente.
Para proteger os recursos naturais e promover a reutilização dos materiais, separe as baterias dos outros tipos de resíduos e recicle-as
através do sistema gratuito de recolha local de baterias.
[Português]
Ustrezno odstranjevanje baterij v tem izdelku
(Uporabno v EU in ostalih evropskih državah s sistemi ločenega odstranjevanja baterij)
Ta oznaka na bateriji, v navodilih ali na embalaži pomeni, da baterij ob izteku njihove življenjske dobe v tem izdelku ne smete odstraniti
skupaj z ostalimi gospodinjskimi odpadki. Oznake za kemijske elemente Hg, Cd ali Pb pomenijo, da baterija vsebuje živo srebro, kadmij ali
svinec v količinah, ki presegajo referenčne nivoje v direktivi EC 2006/66. Če te baterije niso ustrezno odstranjene, te snovi lahko škodujejo
zdravju ljudi oziroma okolju. Za zaščito naravnih virov in za vzpodbujanje ponovne uporabe materialov prosimo, ločite te baterije od ostalih
odpadkov in jih oddajte na predvidenih lokalnih zbirnih reciklažnih mestih.
[Slovenščina]
Korrekt avfallshantering av batterierna i denna produkt
(Gäller EU och andra europeiska länder med särskild batteriåtervinning.) Denna markering på batteriet, i manualen eller på förpackningen
anger att batterierna i denna produkt inte bör slängas tillsammans med annat hushållsavfall. De kemiska symbolerna Hg, Cd eller Pb
visar i förekommande fall att batterierna innehåller kvicksilver, kadmium eller bly i mängder överstigande de gränsvärden som anges i
EU-direktivet 2006/66. Om batterierna inte slängs på ett ansvarsfullt sätt kan dessa substanser utgöra en fara för hälsa eller miljö. Hjälp till
att skydda naturresurser och bidra till materialåtervinning genom att sortera batterierna separat från annat avfall och lämna in dem på en
återvinningsstation.
[Svenska]
Download from Www.Somanuals.com. All Manuals Search And Download.
KKorrekt bortskaffelse af batterierne i dette produkt
(Gælder i EU og andre europæiske lande med særlige retursystemer for batterier).
Mærket på dette batteri, dokumentationen eller emballagen betyder, at batterierne i dette produkt efter endt levetid ikke må bortskaffes
sammen med andet husholdningsaffald. Mærkning med de kemiske symboler Hg, Cd eller Pb betyder, at batteriet indeholder kviksølv,
cadmium eller bly over grænseværdierne i EU-direktiv 2006/66. Hvis batterierne ikke bortskaffes korrekt, kan disse stoffer være skadelige
for menneskers helbred eller for miljøet. For at beskytte naturens ressourcer og fremme genbrug, skal batterier holdes adskilt fra andre typer
affald og genanvendes via dit lokale, gratis batteriretursystem.
[Dansk]
Korrekt avhending av batterier i dette produkt
(Kommer til anvendelse i Den europeiske union og i andre europeiske land med separate systemer for retur av batterier.)
Denne merkingen på batteriet, håndboken eller emballasjen angir at batteriene i dette produktet ikke skal kastes sammen med annet
husholdningsavfall ved slutten av sin levetid. Der det er merket, angir de kjemiske symbolene Hg, Cd eller Pb at batteriet inneholder
kvikksølv, kadmium eller bly over referansenivåene i EF-direktiv 2006/66. Hvis batteriene ikke avhendes på riktig måte, kan disse stoffene
skade menneskers helse eller miljøet. For å beskytte naturressurser og for å fremme gjenbruk av materialer, ber vi deg adskille batterier fra
andre typer avfall og resirkulere dem ved å levere dem på din lokale, gratis mottaksstasjon.
[Norsk]
Tuotteen paristojen oikea hävittäminen
(Koskee Euroopan Unionia ja muita Euroopan maita, joissa on erillinen paristojen palautusjärjestelmä.)
Pariston, käyttöoppaan tai pakkauksen tämä merkintä tarkoittaa, että tämän tuotteen sisältämiä paristoja ei saa hävittää muun
kotitalousjätteen seassa, kun niiden käyttöikä on päättynyt. Kemiallinen symboli Hg, Cd tai Pb ilmaisee, että paristo sisältää elohopeaa,
kadmiumia tai lyijyä ylin EU: n direktiivien 2006/66 viiterajojen. Jos paristoja ei hävitetä oikein, nämä aineet voivat vahingoittaa ihmisten
terveyttä tai ympäristöä. Suojaa luonnonvaroja ja edistä materiaalien uusiokäyttöä - erottele paristot muusta jätteestä ja toimita ne
kierrätettäväksi paikalliseen maksuttomaan paristojen palautusjärjestelmään.
[Suomi]
A termékhez tartozó akkumulátorok megfelelő ártalmatlanítása
(Az Európai Unió területén és más, önálló akkumulátorleadó rendszerrel rendelkező európai országok területén alkalmazandó.)
Az akkumulátoron, a kézikönyvön vagy a csomagoláson szereplő jelzés arra utal, hogy hasznos élettartama végén a terméket nem
szabad egyéb háztartási hulladékkal együtt kidobni. Ahol szerepel a jelzés, a Hg, Cd vagy Pb kémiai elemjelölések arra utalnak, hogy
az akkumulátor az EK 2006/66. számú irányelvben rögzített referenciaszintet meghaladó mennyiségű higanyt, kadmiumot vagy ólmot
tartalmaz. Az akkumulátorok nem megfelelő kezelése esetén ezek az anyagok veszélyt jelenthetnek az egészségre vagy a környezetre.
A természeti erőforrások megóvása és az anyagok újrafelhasználásának ösztönzése érdekében kérjük, különítse el az akkumulátorokat a
többi hulladéktól és vigye vissza a helyi, ingyenes akkumulátorleadó helyre.
[Magyar]
Sposób poprawnego usuwania baterii, w które wyposażony jest niniejszy produkt
(Dotyczy obszaru Unii Europejskiej oraz innych krajów europejskich posiadających oddzielne systemy zwrotu zużytych baterii.)
Niniejsze oznaczenie na baterii, instrukcji obsługi lub opakowaniu oznacza, że po upływie okresu użytkowania baterie, w które wyposażony
był dany produkt, nie mogą zostać usunięte wraz z innymi odpadami pochodzącymi z gospodarstw domowych. Przy zastosowaniu takiego
oznaczenia symbole chemiczne (Hg, Cd lub Pb) wskazują, że dana bateria zawiera rtęć, kadm lub ołów w ilości przewyższającej poziomy
odniesienia opisane w dyrektywie WE 2006/66. Jeśli baterie nie zostaną poprawnie zutylizowane, substancje te mogą powodować
zagrożenie dla zdrowia ludzkiego lub środowiska naturalnego. Aby chronić zasoby naturalne i promować ponowne wykorzystanie
materiałów, należy oddzielać baterie od innego typu odpadów i poddawać je utylizacji poprzez lokalny, bezpłatny system zwrotu baterii.
[Polski]
Σωστή απόρριψη των μπαταριών αυτού του προϊόντος
(Ισχύει στην Ευρωπαϊκή Ένωση και άλλες ευρωπαϊκές χώρες με συστήματα ξεχωριστής ανακύκλωσης μπαταριών.)
Αυτή η επισήμανση πάνω στη μπαταρία, το εγχειρίδιο ή τη συσκευασία υποδεικνύει ότι οι μπαταρίες αυτού του προϊόντος δεν πρέπει να
απορρίπτονται μαζί με άλλα οικιακά απορρίμματα στο τέλος του κύκλου ζωής τους. Όπου υπάρχουν, τα χημικά σύμβολα Hg, Cd ή Pb
υποδεικνύουν ότι η μπαταρία περιέχει υδράργυρο, κάδμιο ή μόλυβδο πάνω από τα επίπεδα αναφοράς της Ευρωπαϊκής Οδηγίας 2006/66.
Αν οι μπαταρίες δεν απορριφθούν σωστά, αυτές οι ουσίες ενδέχεται να προκαλέσουν βλαβερές συνέπειες στην ανθρώπινη υγεία ή το
περιβάλλον. Παρακαλούμε διαχωρίζετε τις μπαταρίες από άλλους τύπους απορριμμάτων και ανακυκλώνετέ τις μέσω του τοπικού σας,
δωρεάν συστήματος ανακύκλωσης μπαταριών, για την προστασία των φυσικών πόρων και την προώθηση της επαναχρησιμοποίησης
υλικών.
[Ελληνικά]
Правилно изхвърляне на батериите в този продукт
(Приложимо в Европейския съюз и други европейски държави със самостоятелни системи за връщане на батерии.)
Това обозначение върху батерията, ръководството или опаковката, показва, че батериите в този продукт не бива да се изхвърлят
с другите битови отпадъци в края на техния полезен живот. Където са маркирани, химическите символи Hg, Cd или Pb показват,
че батерията съдържа живак, кадмий или олово над контролните нива в Директива 2006/66 на ЕО. Ако батериите не се изхвърлят
правилно, тези вещества могат да предизвикат увреждане на човешкото здраве или на околната среда. За да предпазите
природните ресурси и за да съдействате за многократната употреба на материалните ресурси, моля отделяйте батериите от
другите видове отпадъчни продукти и ги рециклирайте посредством Вашата локална система за безплатно връщане на батерии.
[Български]
Download from Www.Somanuals.com. All Manuals Search And Download.
Správná likvidace baterií v tomto výrobku
(Platí v Evropské unii a dalších evropských zemích s vlastními systémy zpětného odběru baterií.)
Tato značka na baterii, návodu nebo obalu znamená, že baterie v tomto výrobku nesmí být na konci své životnosti likvidovány společně s
jiným domovním odpadem. Případně vyznačené symboly chemikálií Hg, Cd nebo Pb upozorňují na to, že baterie obsahuje rtuť, kadmium
nebo olovo v množství překračujícím referenční úrovně stanovené směrnicí ES 2006/66. Pokud baterie nejsou správně zlikvidovány, mohou
tyto látky poškodit zdraví osob nebo životní prostředí. Pro ochranu přírodních zdrojů a pro podporu opakovaného využívání materiálů
oddělte, prosím, baterie od ostatních typů odpadu a nechte je recyklovat prostřednictvím místního bezplatného systému zpětného odběru
baterií.
[Čeština]
Správna likvidácia batérií v tomto výrobku
(Aplikovateľné v krajinách Európskej únie a v ostatných európskych krajinách, v ktorých existujú systémy separovaného zberu batérií.)
Toto označenie na batérii, príručke alebo balení hovorí, že batérie v tomto výrobku by sa po skončení ich životnosti nemali likvidovať spolu
s ostatným domovým odpadom. V prípade takéhoto označenia chemické symboly Hg, Cd alebo Pb znamenajú, že batéria obsahuje ortuť,
kadmium alebo olovo v množstve presahujúcom referenčné hodnoty smernice 2006/66/ES. Pri nevhodnej likvidácii batérií môžu tieto látky
poškodiť zdravie alebo životné prostredie. Za účelom ochrany prírodných zdrojov a podpory opätovného použitia materiálu batérie likvidujte
oddelene od iných typov odpadou a recyklujte ich prostredníctvom miestneho systému bezplatného zberu batérií.
[Slovensky]
Dispoziţii privind eliminarea corectă a bateriilor acestui produs
(aplicabile în Uniunea Europeană şi în alte ţări europene cu sisteme separate de colectare a bateriilor)
Acest marcaj de pe baterie, de pe manualul de utilizare sau de pe ambalaj indică faptul că bateriile acestui produs nu trebuie eliminate
împreună cu alte deşeuri menajere la sfârşitul ciclului lor de viaţă. Dacă sunt marcate, simbolurile chimice Hg, Cd sau Pb indică faptul că
bateria conţine mercur, cadmiu sau plumb peste nivelurile de referinţă prevăzute în Directiva CE 2006/66. În cazul în care bateriile nu sunt
eliminate corespunzător, aceste substanţe pot fi dăunătoare pentru sănătatea omului sau pentru mediu. În vederea protejării resurselor
naturale şi a promovării refolosirii materialelor, vă rugăm să separaţi bateriile de celelalte tipuri de deşeuri şi să le reciclaţi prin intermediul
sistemului gratuit de returnare a bateriilor la nivel local.
[Română]
Šī izstrādājuma bateriju pareiza utilizācija
(Piemērojama Eiropas Savienībā un citās Eiropas valstīs ar atsevišķām bateriju nodošanas sistēmām.)
Šis marķējums uz baterijas, rokasgrāmatā vai uz iepakojuma norāda, ka šī izstrādājuma bateriju pēc tās kalpošanas laika beigām nedrīkst
izmest ar citiem sadzīves atkritumiem. Ja uz baterijas ir atzīmēti ķīmiskie simboli, piem., Hg, Cd vai Pb, tie norāda, ka baterija satur
dzīvsudrabu, kadmiju vai svinu, kura saturs ir lielāks par EK Direktīvā 2006/66 minētajiem lielumiem. Ja baterijas tiek nepareizi likvidētas, šīs
vielas var radīt kaitējumu cilvēku veselībai vai videi. Lai aizsargātu dabas resursus un veicinātu materiālu otrreizēju izmantošanu, šķirojiet
baterijas atsevišķi no citiem atkritumu veidiem un nododiet tās otrreizējai pārstrādei, izmantojot bateriju vietējo bezmaksas nodošanas
sistēmu.
[Lietuvių]
Tinkamas šio produkto akumuliatorių tvarkymas
(Taikoma Europos Sąjungoje ir kitose Europos šalyse, kuriose galioja atskiros akumuliatorių grąžinimo sistemos.)
Šis ženklas yra pateikiamas ant akumuliatoriaus, jo dokumentacijoje ar ant pakuotės nurodo, kad šio produkto akumuliatorių, pasibaigus
jų tarnavimo laikui, negalima išmesti kartu su kitomis buitinėmis atliekomis. Cheminiai simboliai Hg, Cd arba Pb rodo, kad akumuliatoriuje
yra gyvsidabrio, kadmio ar švino, kurio kiekis viršija normą, nurodytą ES direktyvoje 2006/66. Jei akumuliatoriai nebus tinkamai išmesti,
šios medžiagos gali sukelti žalos žmonių sveikatai ar aplinkai. Tam, kad būtų apsaugoti gamtos ištekliai ir skatinamas antrinių žaliavų
panaudojimas, pašome atskirti akumuliatorių nuo kitų rūšių atliekų ir atiduoti perdirbti vietinėje akumuliatorių grąžinimo sistemai.
[Lietuvių]
Őige viis toote akude kasutusest kőrvaldamiseks
(Rakendatav Euroopa Liidus ja teistes Euroopa riikides, kus on kasutusel spetsiaalsed akude kogumissüsteemid).
Selline tähistus akul, dokumentidel vői pakendil näitab, et toote akusid ei tohi kasutusaja lőppemisel kőrvaldada koos muude
olmejäätmetega. Keemilised elemendid Hg, Cd, vői Pb näitavad, et aku elavhőbeda, kaadmiumi vői plii sisaldus on EÜ direktiivi 2006/66
sihttasemest suurem. Kui akusid ei kőrvaldata őigel viisil, vőib nende sisu pőhjustada tervise-vői keskkonnakahjustusi. Selleks, et kaitsta
loodusvarasid ja edendada materjalide taaskasutamist, eraldage akud muudest jäätmetest ja suunake need taaskasutusse kohaliku, tasuta
teenusena pakutava akude tagastussüsteemi abil.
[Eesti]
Download from Www.Somanuals.com. All Manuals Search And Download.
|