Back
2
Place the Wii remotes or battery packs
on the charging station.
4
If you want to turn off the decorative
LED, slide the LED switch to the OFF
position.
FCC Information
Wii Starter Kit
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Using the wireless sensor bar
Congratulations on your purchase
of a Rocketfish Wii starter kit. This kit
includes 7 essential accessories to help
you get the most out of your Wii and is
designed to give you years of trouble-free • Lets you place the Wii console anywhere
performance.
Wireless Wii sensor bar
• Easy and convenient to use
• Power switch and power indicator LED
• Power-saving mode that extends game play
1
Insert four AA batteries into the battery
compartment located on the bottom
of the sensor bar. Make sure that the
+ and – symbols on the batteries align
with the + and – symbols in the battery
compartment.
5V IN LED 12V IN 12V OUT
switch
• Use wirelessly
• 12-foot (3.6 meter) wireless operating
range
ICES-003 Information
This Class B digital apparatus complies
with Canadian ICES-003.
Wireless Wii sensor bar
Top
Package contents
Bottom
• Wii dual-remote charging station with
blue indicator lights includes:
o Ni-MH batteries (2)
Components
Charging station
One-Year Limited Warranty
details.
Contact Rocketfish:
For customer service please call
1-800-620-2790
Charging indicators
o AC power adapter (1)
o Wii remote silicon skins (2)
o Wii power cable (1)
o Component cable (8 feet/2.4 meters)
• WirelessWii sensor bar includes:
o AA batteries (4)
The charging indicators light while
the charging station is charging
the remote or battery pack. When
charging is complete, the charging
indicators will flash slowly.
Note: If you place the Wii remotes
or battery packs incorrectly on
the charging station, the charging
indicators flash rapidly and charging
stops. This is a safety feature. Remove
the Wii remote or battery pack, the
LED recharge indicators will turn off.
If you want to power the charging
station and the Wii console at the same
time using the AC power adaptor
for your Nintendo Wii, you will need
to connect the cord from the Wii
console power adaptor to the 12V IN
connector on the back of the charging
station. Then connect one end of the
supplied Wii power cord into the 12V
OUT connector on the back of the
charging station and the other end
into the power connector on your Wii
console.
SELECT POWER
button button
Battery compartment
Front
2
3
Press the POWER button to turn on
the sensor bar.
AC adapter
Press the SELECT button once for one
hour of operating time, or press the
SELECT button twice for two hours of
operating time. The 1H (one hour) or
2H (two hours) timer indicator lights
come on. When the time is up, the
sensor bar turns off automatically.
One minute before the time is up,
the timer indicator begins to flash. To
extend the time, repeat Step 3.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
© 2009 BBY Solutions, Inc., All Rights Reserved
ROCKETFISH is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products
and brand names are trademarks of their respective
owners.
Battery pack
Features
Low Battery Indicator / Timer Indicator (2 H)
Timer Indicator (1H)
Charging station
Wii power cable
• Silicon skins protect yourWii remotes and
provide better grip during game play
• Charger lets you charge two Wii remotes
or battery packs at the same time
• Two battery packs can be charged even
after you detach them from the Wii
remote
Front
Using the charger stand
1
Plug the AC adapter into 5V IN jack on
the back of the charging station.
You can also plug the Wii adapter
supplied with your Wii Console into
12V IN on the back of the charging
station.
Charge contacts
for battery packs
when the battery
packs are installed
in the Wii remote
Wii is a trademark of Nintendo of America, Inc.
3
Low battery warning
• Pulse charging protects batteries from
overcharging
Charge contacts
for battery packs
after you detach
the battery packs
from the Wii
When the batteries need to be replaced,
the 1H timer indicator will begin to flash.
Turn off the sensor bar and replace the
batteries.
• Short circuit protection
remote
ENGLISH 09-1083
Download from Www.Somanuals.com. All Manuals Search And Download.
RF-GWII012
Quick Setup Guide
|