USER MANUAL
RTB1100
It's important to read this instruction prior to using your new product for the first time.
English IB(A5).indd
1
4/15/2010 20:19:09
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
THE LIGHTNING FLASH AND ARROWHEAD
WITHIN THE TRIANGLE IS A WARNING SIGN
ALERTING YOU OF “DANGEROUS VOLTAGE”
INSIDE THE PRODUCT.
THE EXCLAMATION POINT WITHIN THE TRI-
ANGLE IS A WARNING SIGN ALERTING YOU OF
IMPORTANT INSTRUCTIONS ACCOMPANYING
THE PRODUCT.
SEE MARKING ON BACK OF PRODUCT
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
NEL.
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH
THE SAME OR EQUIVALENT TYPE.
WARNING: TO BE COMPLETELY DISCONNECT THE POWER INPUT , THE MAINS PLUG OF APPARA-
TUS SHALL BE DISCONNECTED FROM THE MAINS. THE MAINS PLUG OF APPARATUS SHOULD NOT
BE OBSTRUCTED OR SHOULD BE EASILY ACCESSED DURING INTENDED USE.
Service Information
This product should be serviced only by those
specially trained in appropriate servicing
techniques.
Main plug is used as the disconnect device,
it shall remain operable and should not be
obstructed during intended use. To be completely
disconnectedtheapparatusfromsupplymains,the
main plug of the apparatus shall be disconnected
from the mains socket outlet completely.
DVD Copy Protection
In accordance with the DVD standard, your DVD
player is equipped with a Copy Protection system,
which can be switched on and off by the DVD
disc itself, in order to make any recording of the
relevant DVD disc onto a videotape of very poor
picture quality, or even impossible. This product
incorporates copyright protection technology
that is protected by method claims of certain U.S.
patents and other intellectual property rights
owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home use only
unless otherwise authorized by Macrovision
Corporation Reverse engineering or disassembly
is prohibited.
Caution
Invisible laser radiation when open and interlocks
defeated. Avoid exposure to beam. Class 1 laser
product.
This system must be opened only by qualified
technicians to prevent accidents caused by the
laser beam.
-2-
English IB(A5).indd
4
4/15/2010 20:19:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
Important Battery Information
CAUTION:
This product utilizes a laser. Use of controls or
adjustments or performance of procedures other
than those specified may result in hazardous
radiation exposure. Do not open covers and do
not repair yourself. Refer servicing to qualified
personnel.
•
Do not mix different types of batteries or new and
old batteries. Do not use rechargeable batteries.
In order to avoid any risk of explosion, observe
the polarities indicated inside the battery
compartment. Replace only with the type of
batteries specified. Do not dispose of them in a
fire or recharge them.
•
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe B
est conforme à la norme du NMB-003 du
Canada.
•
If you are not using the remote control for a long
period of time, remove the batteries.
Please respect the environment and
prevailing regulations. Before you
dispose of batteries or accumula-
tors, ask your dealer whether they
are subject to special recycling and
if they will accept them for disposal.
WARNING
To reduce the risk of fire or electric shock,
do not expose this product to rain or mois-
ture. No objects filled with liquids, such as
vases, should be placed on the apparatus.
Illustrations contained in this document are for
representation only.
Double insulation when servic-
ing use only identical replacement
parts.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
This product contains a low
power laser device.
-3-
English IB(A5).indd
5
4/15/2010 20:19:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Please Read and Save for Future Reference.
Some of the following information may not apply
to your particular product; however, as with
any electronic product, precautions should be
observed during handling and use.
Additional Safety Information
•
Theapparatusshallnotbeexposedtodrippingor
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Alwaysleavesufficientspacearoundtheproduct
forventilation.Donotplaceproductinoronabed,
rug, in a bookcase or cabinet that may prevent
air flow through vent openings.
Do not place lighted candles, cigarettes, cigars,
etc. on the product.
Connect power cord only to AC power source as
marked on the product.
Care should be taken so that objects do not fall
into the product.
Do not attempt to disassemble the cabinet. This
product does not contain customer serviceable
components.
•
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
•
•
•
•
•
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (Including amplifiers) that produce
heat.
Only use attachments / accessories specified by
the manufacturer.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong is provided for your safety.
If the provided plug does not fit into your wall
outlet, consult an electrician for replacement of
the obsolete outlet.
If your product operates on batteries, adhere to
the following precautions:
•
•
A. Any battery may leak electrolyte if mixed with a
different battery type, if inserted incorrectly, or if
all batteries are not replaced at the same time.
B. Any battery may leak electrolyte or explode if
disposedofinfireoranattemptismadetocharge
a battery not intended to be recharged.
C. Discard leaky batteries immediately. Leaking
batteries can cause skin burns or other personal
injury. When discarding batteries, be sure to
disposeoftheminthepropermanner, according
to your state/provincial and local regulations.
D. Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
•
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
•
•
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the
•
power cord or plug is damaged,
liquid has been spilled or objects
]
have fallen into the apparatus, the
apparatus has been exposed to
rain or moisture, does not operate
normally, or has been dropped.
Portable Cart
Warning
-4-
English IB(A5).indd
6
4/15/2010 20:19:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
•
Full high-definition video playback at up to 1080p resolution for an amazing viewing experience.
Upconversion of standard definition DVDs for enhanced picture quality at up to 1080p over an HDMI
connection.
•
•
•
•
Rich multi-channel surround sound.
Easy and simple HDTV connection using a single HDMI cable (cable not included).
Multiple outputs for connecting your home theater system or amplifier.
PIP functionality that lets you display primary and secondary video at the same time (if available on the
Blu-ray Disc).
•
•
Pop-up menu display without interrupting playback (if available on the Blu-ray Disc).
HDMI 1080p/60fps output (Blu-ray Disc only) that provides smooth playback of video with a frame rate
of 60 frames per second (TV must be connected with an HDMI cable and be compatible with 1080p 60
frame).
Connections and Setup
Accessories Provided
Left and right front
Remote control and 2
AAA batteries
Subwoofer
Left and right Sur-
round speakers
Center speaker
speakers
One Pig-Tail
antenna wire
Composite
video cable
One external AM
loop antenna
-5-
English IB(A5).indd
7
4/15/2010 20:19:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
AM Loop Antenna
Things to Consider before You Connect
1. Uncoil the AM antenna wire.
2. Press down on the antennas tab to open the
terminal.
3. Make sure the white wire on the AM loop
antenna is inserted into the AM loop terminal
and the other wire is inserted into the ground
loop terminal.
•
Ensure that the mains supply in your house
complieswiththatindicatedontheidentification
sticker located on the back of your unit.
Install your unit horizontally, away from
any source of heat (fireplace) or appliances
creating strong magnetic or electric fields. The
components of this unit are sensitive to heat.
Themaximumambienttemperatureshouldnot
exceed 35°C / 95°F.
Leave enough space around the unit to allow
adequate ventilation: 10 cm/4 inches on either
side and above the top, and 5 cm/2 inches at the
rear.
The humidity of the room should not exceed
75%. If you have to use the unit outdoors, do not
exposeittorainorsplashingwater.Theapparatus
should not be exposed to dripping or splashing
and no objects filled with liquids, such as vases,
should be placed on the apparatus.
Moving the unit from a cold place to a warm one
can cause condensation on some components
inside the unit. Let the condensation disappear
on its own before turning the unit on again.
Before moving the unit, make sure the disc tray
is empty.
•
Connecting to Your TV (VIDEO)
Method 2
•
•
Method 1
TV
VIDEO IN
Y
Component
Video Cable
(not supplied)
PB
VIDEO IN
P
R
Green
Blue
Red
Video
Cable
•
•
•
Where the mains plug or an appliance coupler
is used as a disconnect device, the disconnect
device shall remain readily operable.
Other important use and cleaning information
at the end of the booklet.
Method 1
Composite video jack (yellow)
•
•
The basic video jack is color-coded yellow.
Video cable (yellow) is supplied for the
connection for good picture quality.
•
•
Connect the video OUT jack on the receiver
to the Video IN jack on your TV so the video
content goes from the receiver to the screen.
Connecting the Antennas
FM antenna
Method 2
Component video jacks (Pr, Pb, Y)
AM Antenna
•
The component video jacks are color-coded
green, blue and red.
White
•
Additional component video cables (not
supplied) are required to provide better picture
quality.Theyareusuallycolor-codedgreen,blue
and red.
The AM and FM antennas connect to the AM and
FM terminals on the system’s back panel. They
must be hooked up in order to receive clear re-
ception.
•
ConnectthecomponentvideoOUTjacksonthe
receivertothecomponentvideoINjacksonyour
TV so the video content goes from the receiver
to the screen.
-6-
English IB(A5).indd
8
4/15/2010 20:19:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
Connecting AUDIO OUT to an Audio
System (via 2-Channel Analog Audio
Output)
Connect the AUDIO OUT jacks from the unit to the
AUDIO IN jacks on TV, VCR, Stereo system or other
audio component.
•
•
•
If your television is a high definition
television, use the unit’s HDMI output to
get the highest possible video resolution.
If one of the devices is not working, check
that all the cables have been inserted
properly into the jacks.
If your component has only one input for
audio (mono), connect it to the left (white
L/Mono) audio jack on the TV and don’t
connect the right audio part of the cable.
TV
Stereo system
VCR
AUDIO IN
OR
OR
Connecting to Your TV (via HDMI input)
Red
HDMI stands for High Definition Multimedia In-
terface. HDMI transfers digital audio and uncom-
pressed digital video on a single cable.
You can select the resolution of the player’s HDMI
output to match your TV’s resolution capabilities,
please see instructions on page 18 for Resolution
setting.
Audio cable
(not included)
White
TV
HD MI
HDMI cable
(not supplied)
To HDMI
input
To HDMI
output
Note:
Refer to the owner’s manual of the connected
TV as well.
-7-
English IB(A5).indd
9
4/15/2010 20:19:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
Connecting AUDIO IN from External Connecting your player to a wired
Sources such as TV
Using AUDIO IN Jacks
router
Connect an Ethernet cable (CAT5 or better with
RJ45 connector) to the ETHERNET jack on the back
of your player and to an Ethernet jack on a hub or
broadband router.
Connect the AUDIO IN jacks from the unit to the
AUDIO OUT jacks on VCR, TV, SAT/Cable Box or
other component. Press either SOURCE button
on the main unit or AUX button on the remote
control to select AUX mode.
LAN
Hub or broadband router
TV
SAT/
AUDIO OUT
VCR
Cable Box
OR
OR
White
Audio cable
(not included)
LAN cable
(not included)
Red
Digital Optical Input
Connect components capable of outputting
Dolby digital (e.g. TV or SAT/Cable Box) or stan-
dard PCM (CD) format digital signals. Use a fiber
optical cable for this digital audio connection.
(Cable not included).
Press OPTICAL button on remote control or
SOURCE button on main unit to select OPTICAL
for digital audio output components.
Notes:
•
•
Do not connect a modular phone cable to
the ETHERNET jack.
When plugging or unplugging the cable,
hold the connector on the end of the
cable. When unplugging, do not pull on
the cable. Press down the lock tab and pull
the connector out of the jack.
Because there are various connection
configurations,followtheinstructionsfrom
your telecommunication carrier or Internet
service provider.
•
-8-
English IB(A5).indd 10
4/15/2010 20:19:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
Connecting the Speakers
Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each
speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the ter-
minal and insert the wire. Release the tab to lock wire in the terminal.
Front Speakers
Center Speaker
Right
Left
Green and Black
Subwoofer
Red and
Black
White and Black
Purple and Black
Insert
Press
Release
Gray and Black
Blue and Black
Rear Speakers
(Surround Sound)
Right
Left
To adjust each speaker volume level for optimum listening experience.
(1) Press the LEVEL button on the remote control to select FL (front Left speaker).
(2) Press the
or buttons to adjust the value up or down (between -10dB and +10dB).
(3) Repeat step (1) and (2) for the other speakers FR, SL, SR, CT, SW.
Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume Setting.
Note:
When connecting the speakers, make sure the polarities (“+” speaker wire to “+” on the re-
ceiver) of speaker wires and terminals match. For example, red wire to red terminal on the
receiver. If the cords are reversed, the sound will be distorted. Do not let the speaker wires
touch each other, it will damage the system’s amplifier.
-9-
English IB(A5).indd 11
4/15/2010 20:19:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
Positioning Speakers
Front Speaker Placement
3
For best results, follow the speaker placement
below.
1
Alignment
Align the center speaker evenly with (A) or slight-
ly behind (B) (the left and right speakers), but not
ahead of them.
2
1
4
3
Courtesy Dolby Laboratories
1. Left, Right (Front Speakers)
Front speakers carry primarily music and sound
effects.
2. Center
In surround mode, the center speaker carries most
of the dialog as well as music and effects.
It should be set between the left and right
speakers.
Angle
3. Surround (Rear Speakers)
Place the left and right speakers to form a 45-de-
gree angle with your favorite viewing position to
duplicate the soundtrack mixer’s perspective.
The surround speakers’ overall sound balance
should be as close as possible to the front speakers.
Proper placement is vital to establish an evenly
distributed sound field.
Height
4. Subwoofer
The three front speakers should be as close as
possible to the same height. This often requires
placing the center speaker directly on top (A) or
beneath (B) the TV set.
A subwoofer is designed to reproduce powerful
low bass effects (explosions, the rumble of
spaceships, etc.).
Note:
A
B
Center speaker provided with this unit
is magnetically shielded to protect your
TV set. It is not recommended to place
speakers without magnetic shield near the
TV set.
-10-
English IB(A5).indd 12
4/15/2010 20:19:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
No adjacent walls
Better Surround Placement
Surround speakers can go on stands facing
each other to approximate sidewall mounting
(A), or to the sides or rear of the viewing area,
aimed upwards; they can go right on the floor, or
preferably, a few feet off the floor such as on end
tables (B).
Location
If possible, place surround speakers to either side
of the listening area, not behind it.
Height
If space permits, install surround speakers 2-3 feet above
viewers. This helps to minimize localization effects.
Aiming
Aim surround speakers straight across the room,
not down at viewers, to help create a more open,
spacious surround sound field.
Test Tone/Channel Balance
Channel Balance
Your receiver is equipped with
a
test signal
generator to help balance the audio level for each
channel. See Audio Setup under The Setup Menu
section for more details on how to access this
feature.
Level Adjustment and Surround Channel Level
Expectation
Alternative Surround Placement
Rear wall
Even though you adjust the surround channel to
be as loud as the others on the test signal, you
may find that surround channels seems quieter
for actual TV and Movie content. This is because
producers use surround for subtle atmospherics
and ambience, and only rarely for special effects.
If rear wall mounting is the only choice, aim the
speakers at each other (A), towards the front (B) or
towards the sidewalls (C, D).
Experiment with placement until sounds seem to
surround you, rather than come from behind you.
Overview of Controls - Front Panel Controls
Stop
playback.
Adjust the
volume.
Press to open or close Switch the unit
the disc tray.
on and off.
Start/pause
playback.
Select the input sources.
Press repeatedly to select:
BD/USB, OPTICAL, AUX,
TUNER.
Connect a USB flash
drive to this port.
-11-
English IB(A5).indd 13
4/15/2010 20:19:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of Controls
OPEN/CLOSE Press to open or close the disc tray.
ON/STANDBY Press to turn on your unit, or put your unit in standby
mode. When your unit is in standby mode, power is
stillenteringyourunit. Todisconnectpower, unplug
the power cord.
Numbers
In playback mode, press GOTO button, then press
the number buttons to enter a title, chapter, track,
or time.
CLEAR
GOTO
Press to clear an input.
Press to search for a title, chapter, track or time.
A(red),
When playing a Blu-ray Disc that has a Java
application, press to control playback. For more
information, see the documentation that came with
the Blu-ray Disc.
B(green),
C(yellow),
D(blue)
VOL+/-
MUTE
Press to increase or decrease the volume.
Press to turn off sound. Press again to turn the
sound back on.
POP UP
During Blu-ray Disc playback, press to open a menu
that lets you control Blu-ray Disc playback.
During DVD playback, press to open the DVD title
menu (if available).
SKIP
/
Press to go to the next or previous chapter (Blu-ray
Disc/DVD) or track (CD).
In tuner mode, press to go to the next higher /lower
preset station.
REV
Press to fast reverse.
STOP
Press to stop playback.
PLAY/PAUSE Press to start or pause playback.
FWD
Press to fast forward.
Navigate through the menus. The left and right arrows also
tune the radio frequency in the tuner mode.
,
/TUNE
,
/TUNE
,
OK
Confirms your selection.
EXIT
SETUP
Press to return to the previous menu.
Press to access the speaker setting and test tone.
ToenableordisabletheCenterspeaker/surroundspeakers,
press this button, and press
/
buttons to select Center
Speaker or Surround Speaker, then use
/
buttons on
the remote control to choose YES or NO.
To start or end the test tone, press this button, and
press
/
buttons to select TS TONE, then press OK
button. The audio signal will be sent to a different
speaker every approximately two seconds; you can
also use
/
buttons to select the speaker channel
you wish to test and adjust, you’ll hear a test tone
coming from the speaker you select, use
/
buttons to adjust the level to your desired setting.
Press OK button to exit this function.
OPTICAL
AUX
Press to select OPTICAL input source.
Press to select AUX input source.
TUNER
Press to select TUNER mode, and toggle between
the FM and AM bands.
-12-
English IB(A5).indd 14
4/15/2010 20:19:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of Controls
BD/USB
Press to select the BD/USB mode.
LEVEL
Toggle channels for different level settings. Adjusts
the value using
/
.
REPEAT
Presstorepeatthecurrenttitle, chapter, track, orrepeatall.
This button is only used for DVD/CD discs.
MEM/ANGLE Stores a station in tuner mode.
Accesses the camera angle function for Blu-ray or
DVD discs if available.
ZOOM
EQ
Press to zoom in on the video. Each time you press
this button, the magnification level changes. This
button is only used for DVD discs .
Selects among preset equalizer mode (POP, ROCK,
CLASSIC, JAZZ, BASS, TREBLE and FLAT). Press
the corresponding button to select the desired
sound mode. This function is only available in Stereo
mode. Note: For BASS and TREBLE effects, you can
use
/
buttons on the remote control to adjust
the value up or down by step 2 dB (between -10dB
and +10dB).
INFO
PiP
Accesses the Info menu.
Press to turn PiP (picture in picture) mode on or
off. This function is only available by Blu-ray discs
if available on disc.
AUDIO
Accesses the audio function. PiP Audio can be
selected through cursor if secondary Audio is
available on the Blu-ray Disc.
Selects between Stereo and Mono mode for Tuner
(FM).
SURROUND/ Press repeatedly to display current Surround Sound
SUBWOOFER setting or display current Subwoofer setting (Soft/
Balance/Strong/Powerful). To change settings, first
press repeatedly to access the current Surround or
Subwoofer setting, then use
/
buttons on the
remote control to change the current setting.
DIMMER/
NIGHT
Press repeatedly to show the display window
brightness level or the current NIGHT mode, then
use
/
buttons on the remote control to change
the current setting.
Note: NIGHT mode is only available for set and
effective during Dolby Digital signal playback.
MENU
Accesses the disc menu during playback.
SUBTITLE
Accesses the subtitle function.
PiPSubtitlecanbeselectedthroughcursorifsecondary
subtitle is available on the Blu-ray Disc.
Note:
Insert the two “AAA” (included with this unit) bat-
teries into the remote control prior to use.
-13-
English IB(A5).indd 15
4/15/2010 20:19:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback Operations
Compatible Discs
playback stops completely. Press
start playback again at the beginning of the
disc.
To fast forward or fast reverse, press
forward) or (fast reverse). Each time you
press one of these buttons, the fast-forward or
fast-reverse speed increases from Fast X2, Fast
X4, Fast X8, Fast X16, Fast X32, Fast X64, to Fast
button to
• Blu-ray Disc
• DVD-video (DVD-ROM)
• DVD+RW, DVD-RW
• DVD+/-R
• Audio CDs (CDDA)
• JPEG
•
•
(fast
Regional Coding
X128. Press
Press either the
the desired direction.
Press the button to skip to the start of the
current chapter or skip to previous chapters.
Press the button to skip to the beginning of
the next chapter.
to resume normal playback.
or button according to
This unit has been designed to play back BD-video
with region “A” and DVD-video with region “1”.
You cannot play back BD-video or DVD-video that
are labeled for other regions. Look for the symbols
on the right on your BD-video or DVD-video.
If these region symbols do not appear on your
BD-video or DVD-video, you cannot play back the
disc in this unit. The letter or number inside the
globe refers to region of the world. A BD-video or
DVD-video labeled for a specific region can only be
played back in the unit with the same region code.
Playing files on a data disc or USB
thumb drive
When you insert a data disc or USB thumb drive
containing picture or video files into your unit,
icons are added to the menu to indicate that video
or picture files are available for playback.
Playing a Blu-ray Disc or DVD
1. Turn on your television set.
2. Press ON/STANDBY button on the remote
control or STANDBY/ON button located on the
unit’s front panel. Press BD/USB on the remote
control.
3. Press OPEN/CLOSE button to open the disc
tray.
Videos
Settings
Pictures
4. Place a disc onto the disc tray with the label
side up.
5. Press OPEN/CLOSE button again to close the
disc tray.
6. After loading a disc, playback starts automatical-
ly, or the disc menu appears. If the disc menu ap-
pears, select the Play option to begin playback.
To play video files:
1. Press
press OK button. A menu opens.
2. Press button, and press or
or
button to select Videos, then
buttons to
select Play Files, then press OK button. A dia-
logue window appears.
Controlling Blu-ray Disc or DVD
Playback
Please select Play mode
•
To start or pause playback, press
button.
Play All
Cancel
The sound is muted when your unit is in pause
mode. To resume normal playback, press
button.
•
To stop playback, press
tings menu is displayed. To resume playback,
press or button to select DVD/BD-ROM,
button. The Set-
then press OK button. Depending on the disc,
playback starts where it stopped or at the be-
ginning of the disc. If you press button twice,
-14-
English IB(A5).indd 16
4/15/2010 20:19:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback Operations
3. Press or button to select Play All (plays all
Viewing photographs
files), then press OK button to start playback.
This unit can display digital photographs files that
have been stored on to a data disc or USB flash
drive.
•
If you want to see information about the file
that is playing, press INFO button on the re-
mote control.
1. Insert a disc or USB flash drive with photograph.
The following menu opens:
To create a playlist:
1. Insert a disc or plug in a USB flash drive, select
Videos, then press button.
2. Press
or
button to select Optical Disc or
Videos
USB, then press OK button. A file browser win-
dow opens with a list of files and folders.
Settings
Pictures
3. Press
then press OK button. If you selected a folder,
the files in the folder are displayed. Press or
or
button to select a file or folder,
button to select a file, then press OK button.
The following menu opens:
2. Press
press OK button.
3. Press button.
or
button to select Pictures, then
Add to Playlist
Play (File)
4. Press
or
button to select an option, then
press OK button. You can select:
• Main Menu - Returns to the main menu.
• Play Files - Press or button to select an
option, then press OK button.
4. Press
or
button to select Add to Playlist,
then press OK button. The file is added to the
playlist now.
To create a playlist:
1. Insert a disc or plug in a USB flash drive, select
Pictures, then press button.
2. Press
or
button to select Optical Disc or
USB, then press OK button. A file browser win-
dow opens with a list of files and folders.
3. Press button.
Notes:
•
If the file you selected is already in the
playlist, Remove from playlist appears.
4. Press
or
button to select an option, then
When you add
a
file to the playlist,
press OK button. You can select:
• Add all to playlist - Adds all files to the play-
list.
• Previous folder - returns the previous menu.
• Play Files - Plays all files or plays files in the
current folder.
Remove all from playlist appears on the
screenautomatically.YoucanuseRemove
all from playlist, Previous Folder and
Play Files to control playback.
Press EXIT button in the file browser
window can return to the upper folder.
•
To add a JPEG file to the playlist:
1. Insert a disc or plug in a USB flash drive, select
Pictures, then press button.
2. Press
USB, then press OK button.
or
button to select Optical Disc or
-15-
English IB(A5).indd 17
4/15/2010 20:19:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback Operations
3. Press
,
,
or
buttons to select a file or
Displaying Blu-ray Disc information
folder, then press OK button. If you selected a
folder, the files in the folder are displayed. Press
•
Press INFO button, your unit displays informa-
tion about the Disc, such as type of disc, current
elapsed time in title, total number of chapters.
Press INFO button again to exit.
,
,
or buttons to select a file, then press
OK button. The following menu appears:
•
Note: The information displayed for
discs other than Blu-ray Discs will be
different.
Add to Playlist
Searching for
elapsed time
a
title, chapter, or
4. Press OK button again to add the selected file
to the playlist.
1. During playback, press GOTO button one or
more times to select a search mode.
•
•
•
One press selects Goto Title mode.
Two presses selects Goto Chapter mode.
Three presses selects Goto Time mode.
Playing an audio CD
1. Press ON/STANDBY button on the remote
control or STANDBY/ON button located on the
unit’s front panel.
2. Press the number buttons to enter the title
number, chapter number, or time, then press
OK button. Your unit goes to the title, chapter,
or time you entered.
2. Press OPEN/CLOSE button to open the disc tray.
3. Place a CD on the disc tray with the label facing
up, then press OPEN/CLOSE button to close
the disc tray. It may take a few seconds for the
CD to load.
4. After loading a disc, playback starts automati-
cally.
Repeating a title, chapter, or CD track
(DVD/CD)
•
Press REPEAT button one or more times to se-
lect a repeat mode.
5. To eject the CD, press OPEN/CLOSE button.
Using PiP (picture-in-picture) mode
Some Blu-ray Discs are compatible with picture-in-
picture (PiP) mode. In PiP mode, the primary video
is displayed on the full screen, and the secondary
video is displayed in a small window.
To control audio CD playback:
•
To start or pause playback, press
button.
The sound is muted when your unit is in pause
mode. To resume normal playback, press
button.
•
To stop playback completely, press button. To
start playback again, press
button. Playback
Primary video
starts at the beginning of the CD.
To fast-forward, press button. To resume nor-
Secondary video
•
•
•
mal playback, press
To fast-reverse, press button. To resume nor-
button.
•
•
Press PiP button to turn PiP mode on or off.
Press AUDIO or SUBTITLE button to turn the
audio/subtitle for the video in the PiP window
on or off. Then use cursor buttons and OK
button to select your preferred options.
mal playback, press
Press either the
the desired direction.
Press the button to skip to the start of the
current track or skip to previous tracks. Press
the button to skip to the beginning of the
button.
button according to
or
Notes:
next track.
•
The available options of Audio vary
from different disc format.
•
To select a track, press GOTO button once, en-
ter the track number with the number buttons,
then press OK button. Press GOTO button twice
to select a desired time position by pressing the
appropriate number buttons and OK button.
•
PiP Subtitle is not available for all discs. It
only applies to Blu-ray discs that supports
picture-in-picture features.
-16-
English IB(A5).indd 18
4/15/2010 20:19:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback Operations
The Setup Menu
The Settings menu appears automatically when
the unit is in BD/USB stop mode.
Using a disc popup menu
1. During Blu-ray or DVD playback, press POP UP
button. The Blu-ray popup menu or the title
menu of DVD disc opens.
Language Setting
1. In the main menu of Settings, press button,
then use or button to select Language.
2. Press
,
,
or buttons to select an option,
then press OK button.
Selecting a play source
Display
•
Press SOURCE button on the front panel of the
unit repeatedly to select BD/USB, OPTICAL,
AUX, TUNER.
Language
Audio
OSD
English
Auto
Menu
Audio
Subtitle
•
•
•
•
Press BD/USB button on the remote control to
select BD/USB mode.
Press OPTICAL button on the remote control to
select OPTICAL mode.
Press AUX button on the remote control to
select AUX mode.
Press TUNER button on the remote control to
select TUNER mode.
Auto
Settings
Language
System
None
Network
2. Press button and press
select an option, then press OK button.
button to select the language
you wish, then press OK button to confirm your
or
button to
Selecting the audio mode
3. Press
or
1. Press AUDIO button. Your unit displays audio
channel information, such as 01/03 Eng Dolby
Digital. 01 indicates the currently selected
audio channel. 03 indicates the total number
of audio channels. Eng (English) indicates the
audio language. Dolby Digital describes the
currently selected audio format.
selection.
4. Press or EXIT button to go to the previous
menu.
2. Press button and press
select an audio mode, then press OK button.
or
button to
Notes
• If the selected language is not available on a
disc, the disc’s language will be used instead.
• If the language chosen is available, it is
automatically selected when you display
the subtitles or press SUBTITLE button on
the remote control. Otherwise, the subtitle
language indicated on the disc is selected.
Selecting the camera angle (Blu-ray
Disc and DVD disc)
Some discs offer different camera angles for
specific scenes. To change the camera angle:
1. Press MEM/ANGLE button on the remote
control. The selected angle will be displayed on
the display bar at the top of the TV screen.
2. Press button and press
or
button to
select the desired angle, then press OK button.
If the disc was recorded using a single camera
angle, this function is not available.
IMPORTANT!
Many BD-Live compatible discs require content
to be downloaded onto USB flash drive in order
to access the available BD-Live features.
A USB flash drive with free space > 1GB needs
to be inserted prior to inserting the BD-Live
compatible disc.
-17-
English IB(A5).indd 19
4/15/2010 20:19:12
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
480p:
480i:
If your TV is an enhanced-defini-
tion TV (EDTV).
If your TV is a standard-definition
NTSC TV (American or Asian SD
TV).
Display Setting
1. In the main menu of Settings, press button,
then use or button to select Display.
System
Display
Network
HDMI Status
HDMI Preferred Format
TV Type
Connected
1080i
Notes:
NTSC
Settings
Display
Audio
• Selecting a resolution the TV does not
support could result in an unstable
picture or loss of the picture. See
the documentation that came with
the TV to find the resolutions the TV
supports.
Resolution
1080p
TV Aspect
16:9 Wide
Off
Film Mode
Language
• Only the HDMI output on your unit
supports 1080p video output at any
frame rate. If the TV is connected to the
component output, the video output is
limited to 1080i or lower.
2. Press button and press
or
button to
select an option, then press OK button.
3. Press
or
button to select the desired
option, and then press OK button to confirm
your selection.
4. Press or EXIT button to go to the previous
menu.
TV Aspect
HDMI Status
16:9 wide, 16:9 Pillarbox, 4:3 Pan and Scan, and 4:3
Letter Box are available for your choice.
This option displays the HDMI status. If an HDMI
TV is connected, Connected appears. If an HDMI
TV is not connected, Disconnected appears.
Film Mode
Movies are recorded on film at a rate of 24 pictures
(frames) per second. Many of the movies on Blu-ray
discs are recorded on the discs at this frame rate.
However, not all TVs can display 24 progressive
frames/second of video. If the TV cannot display
this frame rate, you need to turn off Film Mode.
HDMI Preferred Format
This option shows the best HDMI format for the
connected TV.
Resolution
You can define the video output resolution in this
option.
HDMI Auto: If your TV is
a
high-definition
TV(HDTV) connected to the HDMI
jack on your player and you want
your player to set the output
resolution based on information
exchanged between the TV and
your player over the HDMI cable.
If the TV is a high-definition TV
(HDTV) capable of 1080p (any
frame rate) connected to the
HDMI jack on your player.
If your TV is a high-definition TV
(HDTV) capable of 1080i only.
If your TV is a high-definition TV
(HDTV) capable of 720p only.
Note:
Only your unit’s HDMI output
supports 1080p video output at any
frame rate. The component outputs
are limited to 1080i, regardless of
the Film Mode setting.
1080p:
1080i:
720p:
-18-
English IB(A5).indd 20
4/15/2010 20:19:12
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Digital Output
Audio Setting
•
PCM 5.1 — Sends a PCM audio signal of up to
5.1 channels over the HDMI connection and up
to 2 channels over the optical connection.
PCM Stereo — Sets the output to PCM Stereo
if you have not an audio receiver connected to
your Blu-ray Dsic player or the audio receiver
connected to Blu-ray Disc player is not a 5.1
channel receiver.
1. In the main menu of Settings, press button,
then use or button to select Audio.
•
Network
Audio
Display
PCM Downsamoling
Digital Output
48K hz
PCM 5.1
Settings
Audio
•
Bitstream HD — Sends the original bitstream
from the disc over the HDMI and SPDIF
connections using highest quality possible.
HDMI has the higher quality capabilities with
advanced audio CODECs like TrueHD and DTS-
HD. Blu-ray audio is limited to the soundtrack
for the main moive (No PiP audio and no effects
audio).
Language
System
2. Press button and press
or
button to
select an option, then press OK button.
3. Press
or
button to select the desired
•
•
Bitstream Legacy
—
Sends the original
option, and then press OK button to confirm
your selection.
4. Press or EXIT button to go to the previous
menu.
bitstream from the disc over the HDMI and
SPDIF connections using legacy audio formats.
Blu-ray audio is limited to the soundtrack for
the main movie (No PiP audio andno effects
audio).
PCM Downsampling
Bitstream Mixed — Sends mixed and encoded
Blu-ray audio streams in a single bitstream. This
mode is primarily intended for use with SPDIF
5.1CH receivers to produce mixed Blu-ray audio
in surround sound.
If your player is connected to an audio receiver or
TV with an optical cable, you will need to select
the highest PCM sampling rate the amplifier
supports.
If you DO NOT have a surround sound receiver
connected to your player through one of the
digital audio jacks (optical), select 48kHz.
Otherwise, select the highest sampling rate the
receiver supports. See the documentation that
came with the receiver.
There are 3 options (48kHz, 96kHz and Off) are
available.
Note:
Setting the optical audio output’s
PCM downsampling sampling rate
too high may result in unpredictable
audio playback. If you are not sure,
set the rate to 48kHz.
-19-
English IB(A5).indd 21
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Restore factory defaults
If you choose OK in the prompt message box, all
settings will be restored to the factory defaults.
System Setting
1. In the main menu of Settings, press button,
then use or button to select System.
Network Setting
System
Audio
1. In the main menu of Settings, press button,
then use or button to select Network.
2. Press button.
Optical Disc AutoPlay
BD-Live Internet Access
BD-Live Storage
On
Always Allow Access
internal USB (0.0 KB Free)
Language
System
Erase Blu-ray Storage
Update Via Network
Restore factory defaults
Settings
Required Storage: 48 MB
Language
Restore factory settings and deactivate
Network
System
Wired
Display
Settings
Network
Display
Network Test
2. Press button and press
or
button to
select an option, then press OK button.
Audio
3. Press
or
buttons to select the desired
option, and then press OK button to confirm
your selection.
4. Press or EXIT button to go to the previous
menu.
3. Press or button to select Wired, then press
OK button. The IP Settings screen appears. If the
network connection is active, Link Up appears
next to Link Status. If the network connection
is not active, Link Down displays next to Link
Status.
Optical Disc AutoPlay
If On is selected, it will load data and play back
automatically when you insert
a
Blu-ray disc.
When Off is selected and if you insert a Blu-ray
disc, the disc you can select will be displayed on
the Settings menu.
IP Settings
Link Status
MAC Address
IP Mode
Link Down
xx:xx:xx:xx:xx:xx
Dynamic
0.0.0.0
BD-Live Internet Access
•
•
•
Limit Access — Allows Internet access with
valid “BDLive”network access approval.
Always Allow Access — Always allows BD-Live
Internet access.
IP Address
Subnet Mask
Gateway
0.0.0.0
0.0.0.0
Primary DNS
Secondary DNS
0.0.0.0
Prohibit Access
—
Never allows BD-Live
0.0.0.0
Internet access.
Apply
Cancel
BD-Live Storage
The available storage space is displayed next to
BD-Live Storage.
4. Press
or
button to select IP Mode, then
press OK button.
Erase Blu-ray Storage
5. Press
or
button to select an IP Mode. You
If you choose OK to erase Blu-ray storage, all
bookmarks and BD-Live content saved in memory
are deleted.
can select:
•
•
Dynamic — Uses DHCP to automatically obtain
an IP address.
Manual
—
Lets you manually configure
Update Via Network
network settings, such as IP address, subnet
mask, and gateway settings.
Off — Disables the network interface.
This option displays the required storage space
if the BD player is connected to internet for
upgrade.
•
-20-
English IB(A5).indd 22
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
AUX/OPTICAL
TV, VCR, SAT/Cable Box or portable audio players
can be connected to AUDIO IN jacks at the back
of the unit so that sound from the auxiliary
component comes into the unit and out through
the speakers.
6. Press or EXIT button to go to the previous
menu.
Network Test
You can test the connectivity of the network
configuration by “pinging” an IP address. Pinging
means sending a signal to an IP address and
waiting for a retuning signal.
Connecting Auxiliary Components
Refer to Connecting AUDIO IN from external
sources such as TV for details on connecting the
auxiliary components to the unit.
Selecting AUX/OPTICAL Mode
Press either SOURCE button on the main unit or
AUX/OPTICAL button on the remote control to
select AUX/OPTICAL mode.
Sound Output in AUX or OPTICAL
Mode
•
You may change the Surround Sound setting
to STEREO mode if you like (see instructions
under Overview of Controls). However,
we recommend you leave the system in full
surround mode.
•
If the auxiliary audio signal is mono, there
will be no output from some speakers in full
surround mode.
-21-
English IB(A5).indd 23
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
The unit has a built-in tuner that allows for FM
radio function. The AM loop antenna allows for
AM radio function.
Manual preset
1. Tune to a radio station (see Manual tuning for
details).
2. Press MEM/ANGLE button. While the Program
Preset number is still flashing, input your desired
preset number using the numeric buttons, then
press MEM/ANGLE button to store it.
Manual tuning
1. Connect the FM antenna and the AM loop
antenna at the back of the unit.
2. Press TUNER button.
3. Tune a station by pressing TUNE
/
buttons
Retrieving preset stations
repeatedly until the desired station is found.
Alternatively, you can press and hold the
same buttons down for about two seconds
to activate the automatic search function. In
this mode the unit will automatically tune
frequencies until it finds a station.
1. Press TUNER button to enter the Tuner mode.
2. Press
/
buttons to search up or down for
the preset stations or directly press the numeric
buttons.
4. Repeat step 3 to tune to another radio station.
5. Press TUNER button to toggle between FM and
AM.
Tips:
•
•
When the FM station broadcasts Stereo
sound is found, ST is displayed.
When you manually tune into a weak FM
station, press AUDIO button on remote
control to switch from Stereo to Mono
mode. This will reduce the background
noise.
Storing radio stations
The unit can store up to 30AM/30FM radio stations
in its memory. You can enter every single radio
station yourself or the unit can store all available
radio stations automatically in ascending order.
•
•
If there is any interference, change the
antenna’s position until ideal sound
reception is obtained. TV and other
electronic devices could be the cause
of interference, so try to position the
antenna away from them.
Automatic preset programming
1. Press TUNER button to enter the Tuner mode.
2. Press and hold TUNER button for two seconds
to start automatic preset programming.
3. Radio frequencies will be scanned and stored
automatically. When all the available radio
stations are stored or all 30AM/30FM memory
locations are full, the auto preset programming
function will stop.
A weak signal can affect the Automatic
preset
programming
function’s
efficiency. Adjust the antenna for better
reception and a more efficient search.
-22-
English IB(A5).indd 24
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The unit does not switch on.
After connecting to the Internet, cannot down-
load a file
•
•
Make sure it is plugged in.
•
•
Erase BD Storage.
Make sure that the internet connection is work-
ing.
Press STANDBY/ON button on the remote con-
trol or ON/STANDBY button on the front of the
unit.
•
Try a different USB flash drive.
The device switches off spontaneously.
File was downloaded, but playback from file
pauses
•
The devices switches off automatically when it
is in STOP mode for more than 30 minutes with-
out any user intervention. Switch it on again.
It might be impossible to read the disc.
Insert the disc with the printed side facing up.
Check that the disc can actually be played by
this device.
•
Make sure that the USB flash drive is a USB 2.0
device. Using a USB1.1 device may cause paus-
ing.
•
•
•
•
Try a different USB flash drive.
There is no picture.
•
Clean the disc.
•
•
•
Check that the TV is operating correctly.
Check the connections.
Select the AV input assigned to the unit on the
TV.
Blu-ray Disc or DVD does not play
•
Make sure that the disc has the correct region
code.
•
Replace the HDMI cable with a better one. A
bad HDMI cable can cause loss of video.
•
Some Blu-ray discs will only play over an HDMI
connection.
The picture is of poor quality (with snow or
lines).
Picture-in-Picture(PiP) does not work on a Blu-
ray Disc
•
Check the connections.
•
Make sure that the disc supports PiP mode.
There is no sound or the sound is of poor quality.
When playing
black
a
BD-Live disc, the screen is
•
•
•
Check the connections.
Make sure the speakers are connected.
Make sure the MUTE function is not on.
•
•
Erase BD Storage.
Make sure that the internet connection is work-
ing.
No surround sound.
•
Check to see if system is actually in full Sur-
round mode. To do this, press the SURROUND
button on the remote control - the front panel
display should indicate the current setting. If
current setting is STEREO, the surround speak-
ers and center speaker will be inactive. Press
•
Make sure that the internet cable is connected
securely and correctly to the unit and the inter-
net jack. Some discs require an Internet con-
nection to play.
Cannot connect to the internet
•
•
•
•
Make sure that the Internet connection is set up
correctly.
Test the Internet connection to make sure that
it is working.
Make sure that the BD-Live Internet Access op-
tion is not set to Prohibit Access.
Make sure that the disc your are playing is a le-
gal copy.
/
button to change surround mode accord-
ingly instead of STEREO.
Note: Different file/disc can have different au-
dio type. Press SURROUND button on remote
control follow by
or
buttons can select
the among available surround modes with
showing on front display.
-23-
English IB(A5).indd 25
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
I can’t find my file in the JPEG listing.
Precautions
Use
•
Make sure the file name is valid.
•
If your unit has been stored in a cool place for
any length of time, during a journey for example,
wait for about 2 hours before using it.
The remote control does not work or works
only intermittently.
•
•
The openings located on the top and bottom
are for ventilation and must not be obstructed.
During thunderstorms, we recommend that
you isolate the unit from the electrical supply
so that it is not damaged by electrical or
electromagnetic surges.
This unit is designed for continuous use.
Switching off the unit to standby mode does
not disconnect it from the mains supply. To
completely isolate the equipment, remove the
plug from the mains jack as some components
remain connected to the electrical supply.
If you notice any burning or smoke, disconnect
the unit immediately to avoid any risk of
electrocution.
Do not attempt to look inside the unit through the
disk tray opening or any other opening. You may
be electrocuted or exposed to laser radiation.
This unit is for domestic use only and must not
be used for industrial purposes.
Total or partial copying of recordings protected
by copyright legislation, without the explicit
permission of the holder of the rights,
contravenes current legislation. Copying
or downloading music files for sale or any
other business purpose constitutes or could
constitute a violation of copyright law.
•
•
•
Check that batteries are inserted or change
them.
Aim the remote control at the unit. The infrared
beam must not be blocked or interrupted.
Check that the remote control is configured
to control the device you are trying to operate
with it.
•
The subtitles do not appear.
•
•
Check that the BD/DVD disc provides subtitles.
Refer to the section on how to display sub-
titles.
•
•
The disc menu language is not the correct one.
•
•
The disc menu language has not been set up.
The language of your choice is not available on
the disc.
•
•
Cleaning
•
•
•
Use a soft, dry, clean cloth. Regularly dust the
vents at the back or sides.
Using solvents, abrasive or alcohol-based prod-
ucts risks damaging the unit.
If an object or liquid enters inside the unit, un-
plug it immediately and have it checked by an
authorized servicer or service center.
-24-
English IB(A5).indd 26
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Handling and Caring for Discs
Blu-ray Disc (BD)
•
•
•
•
•
•
•
Handle your discs with care. Hold the disc with
your fingers at the edges or through the hole.
Insert the disc with the label facing up (for a
single-sided disc).
Place the disc properly into the tray in the allot-
ted holder.
Use a soft cloth to clean discs if necessary, al-
ways wiping from the centre to the edge.
Always put discs back in their cases after use
and store in a vertical position.
Do not close the tray with two discs in it or with
a disc not sitting correctly in the holder.
Do not play cracked, chipped or warped discs
nor try to repair them with adhesive tape or
glue.
A disc format developed for recording/playing
high-definition (HD) video (for HDTV, etc.), and for
storing large amounts of data. A single layer Blu-
ray Disc holds up to 25 GB, and a dual-layer Blu-ray
Disc holds up to 50 GB of data.
DVD-Video
Digital video discs - 12 cm, single or double sided,
single or dual layer. DVDs are high density optical
discs on which high quality picture and audio are
recorded by means of digital signals.
DVD-R, DVD-RW, DVD+R, DVD+RW
Most DVD-R and DVD+R (one recording
only), DVD-RW and DVD+RW discs
(rewritable), depending on the DVD
writer and discs used. Recordings using
•
•
Do not write on a disc.
Do not move the unit when a disc is being
played.
DVD+Rewritable
•
Do not scratch discs or store them in places ex-
posed to direct sunlight, high humidity or high
temperatures.
Do not use aerosol cleaners, benzene, anti-stat-
ic liquids or any other solvent for cleaning discs.
When cleaning, wipe gently with a soft damp
(water only) cloth from the centre to the edge,
avoiding circular motions, which could cause
scratches and interference during playback.
DVD-R and DVD-RW discs must be made
in Video DVD mode. Recordings using
DVD+RW discs must be made in accordance with
the specifications for DVD+RW discs with a 4.7 GB
capacity.
•
Audio CDs
Audio CDs (12 cm).
CD-R, CD-RW
Compatible Formats
Most CD-R (one recording only) and CD-RW discs
(rewritable).
In order to ensure playback, discs must conform
with BD, DVD or CD standards. This unit may not
play some recordings or files due to differences in
recording formats, software used and disc types.
CD-Rs written during a multisession recording can
be played, provided that the session has ended
before the disc is played (depending on the write
software).
BD-ROM
BD-ROMs (Blu-ray Disc Read-Only Memory) are
commercially produced discs and are available
in the same capacities as BD below. Other than
conventional movie and video contents, these discs
have enhanced features such as interactive content,
menu operations using pop-up menus (see below),
selection of subtitle display, and slideshow. Although
a BD-ROM may contain any form of data, most BD
ROM discs will contain movies in High Definition
format, for playback on Blu-ray Disc players.
However, depending on the condition of the
CD-writer, computer and the disc used, you may
find that not all discs will play. When playing a
CD-R disc, it is normal for the unit to take up to
60 seconds to recognize the disc before starting
to play.
-25-
English IB(A5).indd 27
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
If the disc is not recognized after a period of 120
seconds, remove the disc, and insert it again.
“Blu-ray Disc”and
are trademarks.
•
•
Do not use its full capacity.
“BD-Live”and “BD-Live”logo
are trademarks of Blu-ray Disc
Association.
CD-Rs should be preferably used instead of
CD-RWs (rewritable CDs) as, in certain cases,
CD-RW playback may be faulty.
•
•
Use reliable, good-quality CD write software.
Close all other applications on the computer to
ensure reliable CD-R disc recording.
Manufactured under license
from Dolby Laboratories.
Dolby and the double-D
symbol are trademarks of
JPEG Files
Dolby Laboratories.
CD-R and CD-RW with JPEG files. Certain JPEG
files, including progressive JPEG files, cannot be
read by this unit.
Manufactured under license
from Dolby Laboratories.
Dolby, Pro Logic, and the
double-D symbol are trade-
marks of Dolby Laboratories.
The total number of files and folders on the disc
should be less than 650. Make sure that files have
the “.jpg” extension. Files without the “.jpg” exten-
sion will not be able to be read by the unit --- even
thought the files are shown as JPEG images on
your computer.
Manufactured under
license under U.S. Patent
#’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and the
Symbol are registered trademarks & the DTS logos
are trademarks of DTS, Inc. © DTS, Inc. All Rights
Reserved.
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Java and logo are trademarks or
registered trademarks of Sun
Microsystems, Inc. in the United
States and/or other countries.
-26-
English IB(A5).indd 28
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Specifications:
Amplifier Section:
RMS Output Power: Dolby Digital Mode with 10% Total Harmonic Distortion
Front, Rear and Center Channel: 167 Watts per channel (1kHz, 8Ω)
Subwoofer Channel: 167 Watts (100Hz, 8Ω)
Total RMS Output Power, Dolby Digital mode: 1000 W
Muting Attenuation: 65 dB
Frequency Response: 200Hz /3dB, 1KHz ref.
Subwoofer Frequency Response: 10Hz/-3dB, 80Hz ref.
Signal to Noise Ratio: 65 dB (Dolby Digital mode)
AM Tuner Section:
Frequency Response: 2kHz +/-6dB, 1kHz ref.
Usable Sensitivity: 800uV/m @ S/N 20dB
Signal to Noise: 38dB
IF Rejection: 35dB
FM Tuner Section:
Frequency Response: 15kHz +/-3dB, 1kHz ref.
Quieting: 24dBu
Signal to Noise: 60dB(stereo) / 65dB(mono)
IF Rejection: 50dB
Dimensions (H x W x D mm):
Unit: 67 x 430 x 335
Front and Surround Speakers: 180 x 105 x 101
Center Speaker: 105 x 180 x 101
Subwoofer: 370 x 180 x 330
-27-
English IB(A5).indd 29
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited warranty extend to the
original consumer purchaser and is limited to non-commercial use of the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States or Canada are warranted to be free from defects in
materials or workmanship for a period of one year from the date of their original retail purchase. If the
unit fails to conform to this warranty, we will service the product using new or refurbished parts and
products, at AVC’s sole discretion.
During a period of one year from the effective warranty date, AVC will provide, when needed, service labor
to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United
States or Canada, you must first call our Customer Support Center at 1-877-252-6873, during the hours
listed in the box below. The determination of service will be made by AVC Customer Support. PLEASE
DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured
replacements for defective parts or products will be used for repairs by AVC at its designated Service
Center for one year from the effective warranty date. Such replacement parts or products are warranted
for an additional one year from the date of repair or replacement. The Customer will be required to ship
the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary
repairs. The customer is responsible for all transportation charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original carton box and packing
material or an equivalent as designated by AVC.
Your Responsibility
(1) You must retain the original sale receipt to provide proof of purchase.
(2) These warranties are effective only if the product is purchased and operated in the United States or
Canada.
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product
or parts which have been lost or discarded, or damage to product or parts caused by misuse,
accident, improper operation or maintenance, or use in violation of instructions provided with the
product, or to product which has been altered or modified without authorization of AVC, or to
products or parts thereof which have had the serial number removed or changed.
-28-
English IB(A5).indd 30
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Out of Warranty
In the event your product requires repair after the limited warranty period has
expired, please contact our Customer Support Center at
1-877-252-6873 or
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern
time.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of product
to our Product Returns Center.
All warranties implied by state law, including the implied warranties of merchantability and fitness for
a particular purpose, are expressly limited to the duration of the limited warranties set forth above.
With the exception of any warranties implied by state law as hereby limited, the foregoing warranty
is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of
manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be
liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time within action must be commenced to enforce any
obligation of AVC arising under the warranty or under any statute, or law of the United States or Canada
or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not
apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary, from
state to state. Some states do not allow limitation on how long an implied warranty lasts, when an
action may be brought, or the exclusion or limitation of incidental or consequential damages, so the
above provisions may not apply to you.
For more information on other products and services, please visit our web site at
Important: Also keep your “Bill of Sale”as proof of purchase.
Model no. ................................................................................
Product name ....................................................................
Type of set. ........................................................................................................................................................................................
Serial no. .................................................................................
Date purchased ....................................................................
Invoice no. ............................................................................
Dealer name .......................................................................
FOR SERVICE AND REPAIR, PLEASE VISIT
Specifications and external appearance are subject to change without notice.
© 2009 AVC MULTIMEDIA
-29-
English IB(A5).indd 31
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
811-110091W010
English IB(A5).indd 32
4/15/2010 20:19:13
Download from Www.Somanuals.com. All Manuals Search And Download.
|