DVD Player
Operating Instructions
PDVD44
Before attempting to connect,
or operating this product.
NOTES Any change to the design and specifications will not be advised.
Please read the instructions completely
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD features
Table of content
1. DVD features
7
8
9
Functions of buttons in remote control _ _ _ _
Technical terms _ _ _ _ _ _ _ _ _ _ _ _ _ _
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _
20
24
24
25
It provides thismulti-media disc playerhigh-resolution image
with, high-quality soundand surround soundeffect. TheDVD
player can play not only DVD discs of various versions, but
also VCD, SUPER-VCD,DVCD, CD,MP3,etc.
10 Specification _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Features
1. It iscompatible to DVD,VCD, SUPER-VCD, DVCD,CD,
MP3, etc.
2. Multi language on screen menu.
3. High quality image with over 500 lines horizontal
pesolution.
Other features
1. Dts digital output, provideshigh-fidelity stereo interface.
2. Multi-language support. DVD supports up to 32-
language caption and8-language dub.
3. Multi-angle. The user can select different angle attheir
option to watch,e.g. closer angle,full view,etc.
4. Multi-image ratio. multi-image ratio mode enables the
product to match different types of TV screen.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Names of parts
2. Names of parts
2.3 Remote control
2.1 Front panel
14
15
1
2
1
2
3
1.POWER
ON/OFF
2.DISK SLOT
3.OPEN/CLOSE
4.STOP
3
4
5
6
16
17
5.PAUSE/PLAY
6.BACKWARD
7.FORWARD
18
19
7
8
20
9
21
10
4
6
7
5
22
11
12
23
24
13
25
26
2.2 Rear panel
1.MENU PBC
2.POWER
3.DISPLAY
4.SUBTITLE
5.SLOW
6.PROGRAM
7.ANGLE
8.AUDIO
9.ENTER/SELECT
10.DIRECTION KEYS
11.ZOOM
12.DVD/GAME(DVD/TV/GAME)
13.VOLUME
14.TITLE
15.EJECT
16.NUMBER
17.CLEAR
18. REPEAT
19.MUTE
20.SETUP
21.STOP
22.PLAY PAUSE
23.FORWARD
24.BACKWARD
25.NEXT
1.COAXIAL
2.PHONE
3.POWER
4.AV/AUDIO
OUTPUT
5.AV/AUDIO
INPUT
6.REMOTE
SENSOR INPUT
7.RF IN
26.PREVIOUS
NOTE:
THE 7 (RF IN) TERMINAL USED ONLY DVD WITH TV
TUNER MODEL.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation before operation
Names of parts
3. Preparation before operation
3.3 Connections
3.1 Unpacking and check
Check for the following Accessories:
The video signal is output through s-video or video output
terminal, while audiosignal is outputby mixing channelterminal,
coaxial terminal, dts signal is only output through or coaxial
terminal. Thereare many solutionsto connectTV and thisproduct,
user can selectone according tothe condition ofthe apparatus to
be connected. However, be aware to shut off all power prior
connection.
Remote control 1
choke 1
Hanger 2
Screw
Battery 2
Audio/Video cord
Owner's manual 1
Remote sensor
3.2Assembling batteries of remote control
Open battery compartment, Insert two7#A batteries,make sure
to match "+" and "-" of the batteries to the marks in the battery
compartment. While operatingremote control, pleasepoint it to
the frontal panelof the DVDplayer.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operation
Basic operation
4. Basic operation
playback, push [
play
]
again to resume
If you haveconnected the productto TV,
all power lineshave been pluggedinto
receptacles, and loaded the batteries
into remote control,so you canplay the
player.
Turn onTV power
Mute (available to analog audio output
Signalonly)
If you haveconnected amplifier,you
should also turnit on, andselect proper
amplifier mode accordingto the typeof
discs to beplayed.
Push [MUTE] tosilence the soundof the
player, pressit again toreturn to normal
state.
Play
Stop playingEJECT
1. Push [POWER]in the player.
1. Push [EJECT]
Control TV remote control toshift TV
to proper videoinput mode (VIDEOIN).
unload the disc until the tray is
ejected. After stopping playing, unload
the disc untilthe tray isejected.
2. Push open/close eject player or [
EJECT] buttons on the remote control
to the slot.
2. Push [EJECT]to close thetray
Attention:
3. Press [POWER]to turn off the player.
Load a discin the slot,with label side
upward (see following figure), place
single disc intheslo t,
While playingifyoufindthe
picture is not shown in full
screenorsome parthiddenor
black and white image
occur,youneedtothe system,
please select right TVsystem
(PAL orNTSC), Please refer
to instructions of [SYSTEM]
IN CHAPTER 6 orexamples
inchapter6.
Then turn off power of all connected
equipment.
3. Push[
] PLAY/PAUSE
The use of REMOTE SENSOR
The player will slot-in disc
automatically and beginto read it,It can
identify different disc format then
display it on the screen of DVD frontal
panel, afterwards ifautomatically plays
disc, If directoryor menu picturedisply
in the screen, you can push the
direction buttons [UP],[DOWN],[LEFT]
and [RIGHT] buttons in the remote
control to movelighting band todesired
track, You can directly push number
buttons to selecttrack.
If you want to put the DVD player in
where you can not see, please insert
REMOTE SENSOR in the REMOTE
SENSOR INPUT, and put REMOTE
SENSOR on where you can see in
automobile, you can control the DVD
player so long as let REMOTE
CONTROL towardREMOTE SENSOR.
When the
symbol
shows in TV screen, it
signifies invalid operation or
your ope ra tion is not
acceptedbythe player.
While playing push [
] to pause the
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequent operation
Frequent operation
5. Frequent operation
Play fastbackward
While playing you can push [FB] button to play fast backward.
Four speed areavailable to playforward, press itonce the speed
grows by one shift, when the speed reaches maximum speed,
press [FB] againto return tonormal state.
We will introduce some regular
operations of different types offunction,
the user can perform one or more
operations as you like, In addition
chapter 7details purposes and
operations of allbuttons
Slow play
While playing push[SLOW] to playslowly at different speed. You
can play slow forward or backward, three shift speed are
available for eitherof them. Push[SLOW] once, pressit once the
speed decreases byone shift, finallyit returns tonormal state.
Select part to be played with
menu
If DVD discto be playedhas menu, when
PBC. state is on you can display the
menu by pushing [MENU/PBC] or
[TITLE], whereon you select a popular
part to play. you can operate following
procedures
Skip tonext chapter/track
While playing push[NEXT] button.
1.Push [MENU/PBC]
Skip to previous chapter/track
The screen display menu picture, the
content to be selected varies with
different disc.
While playing push[PREV] button.
2.Push [UP], [DOWN],[LEFT], [RIGHT]
Select track
Move the lighting band to the desired
item or Madeby pushing thesebuttons
There are morethan one operationprocedure available
A.Push [NEXT] or [PREV] to skip to the next or the previous
track and play.
3. Push [ENTER] to confirm selecting
the item
! B.For those discs with track numbered directly push number
This moment the screen may display a
submenu. You can also push [UP],
[DOWN]. [LEFT], [RIGHT] to confirm
selecting the push [ENTER] to comfirm
the selection
buttons to enter the No. of desired track to play. If the moment
the screen displays
, so there may be three possible
reasons:(1) the track in the disc is not numbered; (2) the
number entered beyondthe scope; (3)PBC is on(push [PBC] to
shift PBC state);
C.Select among thesong track list(refer to thenext chapter).
Play fast forward
While playing you can push [FF] button
to play fast forward. Four speed are
available to play forward, press it once
the speed grows by one shift, when the
speed reaches maximum speed, press
[FF] again to return to normal state.
Display the track list
For DVD discs,when PBC ison, push [MENU]to display thetrack
list, the moment firstly push [UP], [DOWN] to select a track then
push [ENTER] toplay,
For non-DVD discs, when PBC is on, while playing push
[RESUME] to displaythe track list, the momentyou can directly
enter No.to select.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequent operation
Frequent operation
You can push [MENU/PBC] to change PBC
The player willplay orderly asthe user Defined.
state.
Attention:whether the above procedures
work will besubject to thetype of disc.
Display playingtime andstate
Push [DISPLAY] button, TV screen will display current play time
state, i.e.playing time, remaining time, press [DISPLAY] each
time, the screenwill show atime alternatively (thetime displayed
in the frontal panel accordingly changes), the content to be
displayed each timewill subject tothe type ofthe disc.
Repeat play
While playing you can push [REPEAT] to
select differentrepeat content.
1
For DVD discs.push [REPEAT] to repeat
chapter push [REPEAT] again to repeat title,
push [REPEAT] again toexit.
Mp3 operation
MP3 is recently introduced disc, which is recorded with MP3
format audio program. This DVD player supports MP3 disc, you
can operate followingthese procedures:
2
For non-DVD discs,when PBC isoff, push
[REPEAT] to repeat the track content, push
[REPEAT] again to repeat all disc, push
[REPEAT]again to exit.
Push [EJECT] to eject tray, load MP3 disc, push [EJECT] again,
TV screen willdisplay following pictures
Select subtitle Language(subject the Type
ofdisc)
For DVD disc, you can push [SUBTITLE] to
select the language of caption.e.g. English.
Press it once, the screen will display
available language alternatively.
Program play(subjecttothetype ofDisc)
When PBC isoff, inthe stopping state:
1. Push [PROGRAM]
The screen display following figure,
programming operation isavailable.
Program: P00:00
Use Direction key to move the cursor and use
Enter key or PLAY key to enter the corresponding
directory or select the corresponding file for
playing. The option list of play modes lists some
play modes. When LEFT/RIGHT key is used to
move the cursorto a certainoption, UP/DOWN key
may be used to select a play mode. After the
selection is completed, LEFT/RIGHT key may be
used again to move the cursor to the directory or
file to be played. Andthen press PLAY key (ifit is in
the directory, it is probably required to press the
key twice) tostart playing thedisc.
2.Push number buttons to enter the number
Of Chapter ortrack
Example:of the userwant to firstlyplay track
5, then track3,finally track 6,so you canenter
5,3, 6 orderly. (You can push[CLEAR] button
to escape theentered number).
3. Push [PLAY]
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequent operation
System setting
There are two kinds of file disc play mode:1. No-menu play mode.2.
6. System setting
Menu play mode. The factory defaultplay mode of this unit is no-menu
play mode. Please refer to the description on [SETUP]setting menu for
the information onthe switching ofplay modes.
Attention:
While playing, you can
Push [SETUP], the screen will display system setting menu, the
moment you can push [UP], [DOWN] to move the high lighting
band to the desired item, push [ENTER] to display sub-menu. In
the sub-menu push[RIGHT] to enterinferior sub-menu. You can
push [UP], [DOWN] to move the high lighting band in all menu
pictures. Push [ENTER]your selection willbe valid. Push[LEFT]
to escape thesub-menu in theright of thescreen. Anytime push
[SETUP] or [EXITSETUP] you willescape system settingstate.
In the first play mode, after a disc is put into the player and the player
reads the disc, the player will go into [STOP]state and display [STOP]
on DVD displaypanel.
At this time, you can press a numerical keyto select a file and playthe
disc starting with the selected file or press [PLAY] key to play the disc
starting with the first file ofthis disc. This file may be either an MP3file
or [MPEG] file.When an MP3is being played,you can press [DISPLAY]
key to viewfile play time.
push[PREVIOUS]or[NEXT]
to play the previous track or
the nextone.
While playing you can
push [STOP] to backto the
menupicture.
Note:1.If you arenot quite familiarwith thisunitand press [PROG] key
Or select programming function through the menu when the discs
described above areplayed,error operations willbe caused.
2. If yourdisc contains files of multiple formats, press [STOP] keyafter
the play of the disc is finished and display the picture that you can`t
usage [UP]or[DOWN ]key controled the menu.But you may press
Previous or Nextkey to viewtrack numbers inthe list onthe right side or
directly press anumerical key toselect a trackto play.
The high lighting band
indicates current item
After a JPEG file disc is read out, you can press PLAY key to start
playing.
The explanation to the
current item
Following are someexamples of frequentsetting the usercan
setting other itemsfollowing their instructions.
Example 1:Set TVscreen ratio mode
1.Push [SETUP] to enable the screen display the system
setting picture, make sure the high lighting band has been
located in GENERAL SETUP push [ENTER], TV screen will
display following picture.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
System setting
System setting
2.Push [RIGHT] to enter the sub-menu in the sub-menu in the
right screen. Ifyou want toset the screento "WIDE", firstlypush
[DOWN] twice tomove the highlighting band to"WIDE' item, then
push [ENTER],
once to move the high lighting band to "STEREO" item, then
push [ENTER].
3,Push [MAIN PAGE] to exitsystem setting page.
3.Push [MAIN PAGE] to exitsystem setting.
Notes:three screen ratiomodes, i, e,16:9 WIDE, 4:3PS, 4:3 Lare
available for yourselection to enabledifferent discsto matchTV.
the relationship betweenthe video ofdisc and screenratio mode
are as follows:
Example 3: Coaxialoutput
If the useruse coaxial terminalto output audiosignal, you needto
set the audio output "SPDIF/RAW' or "SPDIF/PCM", you can
operate following theseprocedures:
Video of disc
4:3
normal
4:3PS
4:3LB
16:9
Push [SETUP] toenable TVscreen display systemsetting menu
picture, please firstly enter general setting sub-menu,then
select the item "AUDIO OUTPUT" in the menu, then push
[ENTER], TVscreen will display:
16:9
16:9
Example 2:Set soundmix output mode
1. Push [SETUP] to enable TV screen display system setting
menu picture, push[DOWN] to movethe high lightingband to the
item "SPEAKER SETUP",push [ENTER],TV screen willdisplay
2. Push [RIGHT] to enterthe sub-menu inthe right screen,If you
2.Push [RIGHT] to enter the sub-menu in the right screen, push
[DOWN] to movethe high lightingband to theitem "SPDIF/RAW"
or "SPDIF/PCM",then push[ENTER].
3.Push [MAIN PAGE] to exitsystem setting.
Special indications: if you are not going to use coaxial output
audio signal, youneed to setaudio output to"ANALOG' output, so
there will be no audio signal to set audio output to "ANALOG"
output, so there will be no audio signal to be output in the
mixchannel.
want to setthe sound modeto "STEREO", firstlypush [DOWN]
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
System setting
System setting
Example 4: Setage control grade
For original DVD disc, parents can prohibit the those content
inadvisable to children to be played, you can operate following
these procedures toset age controlgrade:
1.Push [POWER]
2.Push [SETUP] to enable TV screen display system setting
menu picture, push[DOWN] till thehigh lighting bandmove to the
item "PREFERENCE", push[ENTER], then push[DOWN] till the
high lighting bandmove to theitem "PARENTAL", TV screen will
display:
2. Push [RIGHT]to enter thesub-menu in theright of thescreen. If
you want to set the language of operation indication or menu
display to English,you can push"UP" or "DOWN"to move thehigh
lighting band to"English", then push[ENTER], the languageof the
menu in thescreen will turninto English.
3.Push [MAIN PAGE] to exitsystem setting.
3. The submenu SMART NAV in PREFERENCES item is
used to set whether there is a menu when an MP3, MPEG
file disc or JPEG file disc is played.
3. Push [RIGHT]to enter thesub-menu in theright of thescreen, if
you want to change the age control grade to 3, push [DOWN] till
the high lighting band move to the item "3PG", the player will
indicate you to enter password, if the ex-factory password has
never been modifiied,you can pushnumber buttons "4408"in the
remote control.
4.Push [SETUP] to exit systemsetting.
Example 5: Set Operation indication or menu display
language
For other description of this menu, please refer to the User
Manual provided at an earlier time.
1.Push [SETUP] to enable TV screen display system setting
picture, push [ENTER], push [DOWN] till the high lighting band
move to theitem "OSD LANG",TV screenwill display:
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of buttons in
remote control
Functions of buttons in
remote control
7. Functions of buttons in remote control
when PBC is off, while playing you should firstly push [STOP]
button, then [PBC]to open yet.
This chapter willdetail the functionsand operation proceduresof
all buttons inthe remote control,for users' instantreference. Most
operation procedures can be referred to relevant content of
chapter 4, 5.
8.8 [
](whetheritworksdependonthetype ofdisc)
While playing DVD disc, push the button to skip to next chapter;
while playing SVCD and other discs, push this button to skip to
next track
8. 1[
]
When the DVD player is in stop, pause, slow play, fast forward,
8.9 [ANGLE](whetheritworksdependonthetype ofdisc)
fast reverse state,you can push[
] to resumenormal playback.
while playing DVD disc with multi-angle function, push [ANGLE]
to play thevideo in different angles atyour option. Pushthe button
each time, theplayer will beshift to ascene in anotherangle.
Push [
] again, theDVD player willbe pause,push [ ] again,
it will play.
8. 2[TITLE](whetherifworksdepends onthetype ofdisc)
8.10 [MUTE]
Push [TITLE] todisplay the titlemenu included inDVD disc. Inthe
menu picture, you can push [UP], [DOWN], [LEFT], [RIGHT] to
move the cursors to define desired item, then push [ENTER] to
select the partto be played(or the sub-menu,this moment youcan
also push [UP],[DOWN], [LEFT], [RIGHT]to move thecursors to
define desired item,then [ENTER] toplay).
Push this button to silence the sound output through analog
channel.
8.11[
]
Push this buttonto play fastforward silently, press itonce, the disc
forward at a new speedand finally returnto normal playingstate.
8.3 [PROGRAM]
8.12[
]
Whether it worksdepends on thetype of disc,push [PROGRAM]
to enable usersto change theplaying order.
Push this buttonto play fastbackward silently, press itonce, the
disc backward ata new speedand finally returnto normal playing
state.
8.4 [EJECT]
Push the button once,the tray will be ejected, press it again to
close the tray. When youwant to loador unload disc,you can use
this button.
8.13[SLOW]
Push this buttonto play slowsilently,it can beplayed slow forward
or backward, press it once to shift a speed and finally return to
normal playing state.
8.5 [REPEAT]
Push this buttonto repeat chapter, title &disc.
8.6 [ZOOM]
8.14 [DISPLAY]
Push the button to display some data of time, e, g. the current
playing time, remainingtime, etc.
While playing push this button to zoom out the image, push the
button once to enlarge the image by two times, push it twice to
enlarge it by four times, press it another time to resume normal
playback.
8.15[
]
While playing DVD disc, push the button to skip to previous
chapter; while playingSVCD and otherdiscs, push thisbutton to
skip to previoustrack.
8.7 [MENU/PBC]
While playing DVD, push this button to display the option menu
included in the disc (whether itworks depends on the type of the
disc). Push this button to shift PBC state. For DVD/SVCD disc,
8.16 [ENTER]
Push the buttonto execute theentered or theselected item.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of buttons in
remote control
Functions of buttons in
remote control
8.17 [UP], [DOWN],[LEFT], [RIGHT]
8.25 [DVD/GAME]
When the screen display the menu of DVD disc or system menu,
the player isin waiting state,you can pushthese buttons tomove
the cursor thenselect the desireditem.
Push [DVD/GAME] again, the unit will turn to "GAME"state,you
can watch other program or play game by LINE INPUT on front
panel.
8.18 NUMBERBUTTONS
8.26 [VOL+, VOL-]
[0], [1].... [9]number buttons areused to enternumber, e.g.No. of
track, DVD chapterNo., time data,etc.
Push VOL+ toincrease volume, pushVOL- to lowerto volume.
8.19 [10+]
NOTE:DVD WITH TV TUNER MODEL,THE [DVD/GAME]
KEY ISEXCHANGED BY[DVD/TV/GAME]
When the No. of a track or a chapter is over 9, firstly push [10+]
then push relevantnumber buttons.The button isused to enterthe
number in decade of the No., press it each time, the number in
decade will increaseby 1.
1.Push [DVD/TV/GAME] one time,the unitwill turn to``TV``
state,then push [SETUP],and chooseAUTO SEARCH,push
[RIGHT] of direction key,and choose ON by direction key.
Then push [RIGHT].This time,the unit will search and
remember TVproram automatically.
8.20 [CLEAR]
When entering theprogrammed No., push[CLEAR] to cancelthe
entered number.
2.You can choose TV program by [UP] and [DOWN] of
direction key.
8.21 [SETUP]
Push the button,the screen willdisplay system settingpicture, the
user can selectsome relative constantparameters. Theuser also
can set itas needed. Detailedoperation procedures pleaserefer
to chapter six.
3.Youcan chooseTV programby numberkey.
Fox example,if you want to choose 18 CH, please push [10
]then push[8].
8.22[
]
4.Youcan tune finelyby[LEFT]and [RIGHT]ofdirection key.
While playing DVD,push the buttononce to pauseplaying, push it
twice to completely stop playing. Whether this function works
subject to thetype of disc.
5.Push [DVD/TV/GAME] again,the unit will turn to
``INput``state,you canwatch other program or play game by
LINE INPUTon frontpanel.
While playing VCD/SVCD and PBC being on,push [STOP], you
can return menu.
8.23 [SUBTITLE]
Push this button to select caption indication language, e.g.
English, etc. Press it once to change a caption Language.(This
operation works onlyfor the discwith multi subtitleencoded).
8.24 [AUDIO]
Push this keyto select thelanguage of soundon the disc, push it
once to change to another language. (This operation works only
for the discwith multi languageaudio).
23
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical terms
Specifications
Check whether thedisc is scratchedor there isdirt whereof.
8. Technical terms
This player iscontrolled by microcomputer,if anytrouble occurs,
please turn off the power, reopen ittill 10 minuteslater, whenthere
is notrouble themoment, you cannormally operate theplayer.
TITLE:For DVD disc it is defined as a long complete segment of
image or musicor a movie. Each title hasa number thatmakes it
easy to search.
Button does notwork
This may causedby unstable electricitycurrent or otherabnormal
trouble, please turnoff thepower, reopenit till 10minutes later.
TRACK: The image or music of a VCD or CD. Each track has a
number for search.
CHAPTER:It is smaller than title among the units of a DVD, it is
defined as along complete segmentof image ormusic or amovie.
A title is made up of several chapters, and each chapter has a
number for search.
10. Specifications
CAPTION:The literature in TV screen bottom, generally it is
translation or dialogue,also recorded inthe disc.
Playable discs: DVD/SVCD/DVCD/VCD1.0,1.1,2.0(micro laser
video/audio disc) CD- DA(common music laser
CD), MP3 audio disc,CD-R,CD-RW
ANGLE:For some DVD discs, they record pictures filmed from
different angles,the user canwatch a samepicture from different
angles at youroption.
Videoformat:
MPEG1,MPEG2, PCM, DOLBYDIGITAL,DTS;
Audio format: MPEG1,MPEG2,PCM, DOLBY DIGITAL,
DTS;analog stereo,
Signaloutput:
video signal: NTSCor PAL
video:1.0Vp-p
9. Troubleshooting
No sound
audio:mix stereo 2Vp-p
Check if the unit is connected securely with other systems
including amplifier orTV;.
Functionaloperation:
please refer tochapter 7.
Make sure youoperate theTV or amplifiercorrectly.
Make sure thesystem setting iscorrect.
Disc cannot beplayed
Output interface: RCA output,high-resolution system (S-VIDEO)
output,coaxial digital output
Powervoltage:DC9.5-24v
Powerconsumption:15W
.
Make sure thedisc has beenproperly in thetray.
Check whether thereis only discin the tray.
Make sure thedisc is clean
Frequencyresponse:DVD:20Hz-20KHz
Audiosignal/noise ratio: 90dB
Weight:1.2kg
Notes:
.Remote control doesnot work
Any change to
the design and
specifications
w i l l n o t b e
advised.
Remove barriers fromthe remote control.Replace the batteries
with new ones.
Productdimension:155x145x48(mm)
Accessories: audio/video cable, remote control (with
Point the remotecontrol at theremote control sensorof the unit.
Check whether thebatteries energy issufficient.
Twistingimage
batteries),user's manual, videoCABLE.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
How To Deal With Disk
How To Deal With Disk
Attention
Don't write on the labeled
side.
Don't use pickup cleaning
p re p a ra t io n . p h e n yl,
c h e m i c a l s o l u t i o n ,
dispersing solution, anti-
static electricity solution or
any other kind ofsolutions to
cleandisk
How tohold disk
Don't touchthe facecarving information.
When there arestains on theface of disk
wipe genitally witha wet clothand then witha dry one.
Don't stick label or glue-
based note on disk(Don't use
disks with remaining glue or
damagedglueylable)
When a diskis brought froma cold environmentto a hotone, there
could be steam on the face of disk. wipe with a dry, soft, smooth
cloth before using.
Don't us e s cra tching-
preventingmaterials orcover,
unless it is assignedto use on
this machine.
Don't put or store disk at
following environments.
straight under the sunshine.
/at moist or dusty places at
the exit of hot air or beside
heatinginstallation.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|