Wireless Telephone Quick Reference Guide
Fujitsu F9600
DT14DS
SpectraLink 6020 Wireless Telephone
On/Off Press and hold END. Two
DT14DS
chirps on, one chirp off
The diagram above shows how the DT14DS keypad
corresponds to the Wireless Telephone.
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this
Pressing LINE followed by a digit (1-8) on the Wireless
Telephone is equivalent to pressing one of the Feature
Access buttons on the DT14DS. LINE + 1 is reserved as
the prime line appearance and LINE + 9 is reserved for
message waiting and cannot be used for any other
feature.
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
Answer Press HOLD to put your current
second call call on hold, or END to hang up.
Press LINE + the digit that is
FCN 4, 5, 9 and * on the Wireless Telephone can be
programmed for autodial capabilities.
flashing.
Hold Press HOLD
Function Key
Strokes
Default
Settings
Fill In Your
Feature Settings
Take off Hold Press LINE followed by the digit
for the line on hold, which will be
flashing.
FCN + 1
FCN + 2
FCN + 3
FCN + 4
FCN + 5
FCN + 6
FCN + 7
FCN + 8
FCN + 9
FCN + *
FCN + #
MUTE
CAMP ON
FLASH
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook
allows you to scroll through
menu screens.
(AutoDial)
(AutoDial)
NEW CALL
PARK
User Options Press the CFG softkey while on
hook to change handset
settings.
XFER
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
(AutoDial)
(AutoDial)
EXIT MENUS
1725-36151-001_E
Fujitsu F9600 is a trademark of
Fujitsu Business Communication System, Inc.
For technical support, please contact
your facility’s Network Administrator.
Download from Www.Somanuals.com. All Manuals Search And Download.
|