PMS 419
600 IQ
Widetrak
Snowmobile Owner's Manual
for Maintenance and Safety
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Read, understand, and follow all of the instructions and safety precautions in
this manual and on all product labels.
Failure to follow the safety precautions could result in serious injury or death.
WARNING
The engine exhaust from this product contains chemicals known to the State
of California to cause cancer, birth defects or other reproductive harm.
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Thank you for purchasing a POLARIS vehicle, and welcome to our
world-wide family of POLARIS enthusiasts. Be sure to visit us online at
www.polaris.com for the latest news, new product introductions,
upcoming events, career opportunities and more.
Here at POLARIS we proudly produce an exciting line of utility and
recreational products.
• Snowmobiles
• All-terrain vehicles (ATVs)
• Low emission vehicles (LEVs)
• RANGER® utility vehicles
• VICTORY® motorcycles
• GEM® vehicles
We believe POLARIS sets a standard of excellence for all utility and
recreational vehicles manufactured in the world today. Many years of
experience have gone into the engineering, design, and development of
your POLARIS vehicle, making it the finest machine we’ve ever pro-
duced.
For safe and enjoyable operation of your vehicle, be sure to follow the
instructions and recommendations in this owner’s manual. Your manual
contains instructions for minor maintenance, but information about
major repairs is outlined in the POLARIS Service Manual and should be
performed only by a factory certified Master Service Dealer® (MSD)
technician.
Your POLARIS dealer knows your vehicle best and is interested in your
total satisfaction. Be sure to return to your dealership for all of your ser-
vice needs during, and after, the warranty period.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
POLARIS and IQ are registered trademarks of POLARIS Industries Inc.
Copyright 2013 POLARIS Sales Inc. All information contained within this publication
is based on the latest product information at the time of publication. Due to constant
improvements in the design and quality of production components, some minor discrep-
ancies may result between the actual vehicle and the information presented in this publi-
cation. Depictions and/or procedures in this publication are intended for reference use
only. No liability can be accepted for omissions or inaccuracies. Any reprinting or reuse
of the depictions and/or procedures contained within, whether whole or in part, is
expressly prohibited.
The original instructions for this vehicle are in English. Other languages are provided as
translations of the original instructions.
Printed in U.S.A.
2014 600 IQ Widetrak Owner’s Manual
P/N 9924294
2
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
This section contains helpful information for owners and drivers and
illustrates the location of important identification numbers that should
be recorded in the owner’s manual.
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
This section describes safe vehicle operation and identifies warning
decals and their locations.
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
This section identifies the locations of your snowmobile’s controls and
features.
The Perfect Fit . . . . . . . . . . . . . . . . . . . . . . . . . 46
This section explains how to tailor the suspension and other features for
an optimum riding experience.
Pre-Ride Inspections . . . . . . . . . . . . . . . . . . . . 54
This section explains procedures that must be performed before riding.
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
This section explains proper engine break-in, operation of features and
general operating procedures.
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
This section defines your role, and your dealer’s role, in your
snowmobile’s regular maintenance.
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . 114
POLARIS Products. . . . . . . . . . . . . . . . . . . . . 116
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . 117
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Maintenance Log . . . . . . . . . . . . . . . . . . . . . . 131
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Important Notes for Owners and Drivers
After reading this manual, store it in the snowmobile for convenient ref-
erence. It should remain with the snowmobile when the snowmobile is
sold.
Some of the illustrations and photos used in this manual are general rep-
resentations. Your model may differ.
Follow the maintenance program outlined in this manual. Preventive
maintenance ensures that critical components of the snowmobile are
inspected by your dealer at specific mileage intervals.
You and your dealer must complete the registration form included with
your snowmobile and forward it to us. This completed form is necessary
to ensure warranty coverage.
Protect and preserve your right to ride by joining your local trail riding
clubs.
When teaching inexperienced operators to ride, set up a predetermined
course for practice. Make sure they know how to drive and control the
snowmobile before allowing them to make longer trips. Teach them
proper snowmobile courtesy, and enroll them in driver’s training and
safety courses sponsored by local or state organizations.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Preservation of the Environment
POLARIS is committed to supporting an environmental education cam-
paign. We encourage state and provincial governments across the snow-
belt to adopt rigorous safety training programs that encourage protection
of our environment, including wildlife and vegetation.
Snowmobile clubs and other organizations are working together to pro-
tect our environment. Please support their efforts and operate your
snowmobile with consideration for the protection and preservation of
our environment.
Noise Level
One of the most publicized issues about snowmobiles is noise. The
Society of Automotive Engineers (SAE), the standard-setting body for
snowmobile development, recommends that snowmobiles conform to
prescribed sound levels.
POLARIS snowmobiles are engineered to conform to these SAE stan-
dards. Our muffler systems are designed to reduce noise levels and must
not be altered or removed. The sound of your snowmobile may not be
welcome to non-snowmobilers, so you have a responsibility to operate
your snowmobile with concern for others. We do our part by manufac-
turing quieter machines; we ask your help to further reduce the impact
of noise by operating your snowmobile safely and responsibly.
Air Pollution
POLARIS engineers continuously investigate ways to reduce emission
levels of two-stroke engines. We expect our efforts to lead to the reduc-
tion of potential air pollution.
In addition to our technological research, we encourage government
agencies, manufacturers, distributors, dealers, ecologists, and other
interested parties to work together to develop data on environmental
topics.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Vehicle Identification Numbers
Record your snowmobile’s identification numbers and key number in
the spaces provided. Remove the spare key and store it in a safe place.
Your key can be duplicated only by mating a POLARIS key blank with
one of your existing keys, so if both keys are lost, the ignition switch
must be replaced.
X
Vehicle Model Number: ___________________________________________________
Tunnel VIN (X): __________________________________________________________
(right side of the tunnel)
Engine Serial Number (on valve cover): _______________________________________
Key Number: ____________________________________________________________
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
The following signal words and symbols appear throughout this manual
and on your vehicle. Your safety is involved when these words and sym-
bols are used. Become familiar with their meanings before reading the
manual.
The safety alert symbol indicates a potential personal injury hazard.
DANGER
A DANGER indicates a hazardous situation that, if not avoided, will result in
death or serious injury.
WARNING
A WARNING indicates a hazardous situation that, if not avoided, could result in
death or serious injury.
CAUTION
A CAUTION indicates a hazardous situation that, if not avoided, could result in
minor or moderate injury.
NOTICE
A NOTICE indicates a situation that could result in property damage.
The Prohibition Safety Sign indicates an action NOT to take in order
to avoid a hazard.
The Mandatory Action Sign indicates an action that NEEDS to be
taken to avoid a hazard.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Follow the recommended maintenance program outlined beginning on
page 75 of this manual to ensure that all critical components on the
snowmobile are thoroughly inspected by your dealer at specific mileage
intervals.
WARNING
Driving a snowmobile requires your full attention. DO NOT drink alcohol or use
drugs or medications before or while driving or riding as a passenger. They will
reduce your alertness and slow your reaction time.
Snowmobiles are capable of traveling at high speeds. Use extra caution to
ensure operator safety. Make sure your snowmobile is in excellent operating
condition at all times. Always check major and vital safety components before
every ride.
All POLARIS snowmobiles are designed and tested to provide safe operation
when used as directed. Failure of critical machine components may result from
operation with any modifications, especially those that increase speed or power.
DO NOT MODIFY YOUR MACHINE. The snowmobile may become aerody-
namically unstable at speeds higher than those for which it is designed. Loss of
control may occur at higher speeds. Modifications may also create a safety haz-
ard and lead to bodily injury.
The warranty on your entire machine is terminated if any equipment has
been added, or any modifications have been made, to increase the speed or
power of the snowmobile.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Stay Clear of Track
Your snowmobile is propelled by a revolving track that must be partially
exposed for proper operation.
WARNING! Serious injuries may result if
hands, feet, or clothing become entangled
in the track. Be alert when riding, and
remain properly seated to stay clear of the
track. Never hold the snowmobile up or
stand behind it while warming up the track.
A loose track or flying debris could cause
serious injury or death. We recommend
having your dealer perform all track service
and alignment procedures.
Stay Clear of Engine
Never attempt adjustments with the engine running. Turn off the igni-
tion, raise the hood, make the adjustment, secure shields and guards,
secure the hood, and then restart the engine to check its operation.
WARNING! Serious injury can occur if fingers or clothing contact the moving
parts of an engine. Always stop the engine before attempting adjustments.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Riding Position
Operating a snowmobile requires skill and balance for proper control.
Rider positions may vary with experience; but under many conditions,
the proper position is to be seated with both feet on the running boards
and both hands on the handlebar grips for proper throttle, brake and
steering control.
WARNING! Improper riding position may reduce control and could result in
serious injury or death. Always ride in a position that allows for control of your
vehicle.
Survival Preparation
For your safety, always ride in a group of other snowmobilers. Always
tell someone where you’re going and how long you expect to be gone. If
it isn’t possible to ride with others, and you must travel into remote
areas, always carry survival equipment that’s appropriate to the condi-
tions you may encounter. Such equipment may include, but is not lim-
ited to: extra clothing, a sleeping bag, a flashlight, food and water, a
signaling mirror, a means of building a fire, and a two-way radio or cel-
lular telephone.
Always carry the owner’s manual on your snowmobile. For added pro-
tection, purchase and carry the following items on your snowmobile as
well:
• Spare Drive Belt
• Extra Set of Spark Plugs
• Tow Rope
• Winter Survival Kit
• Trail Map
• First Aid Kit
• Tool Kit
• Extra Oil
• Fuel Deicer
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Riding Apparel
Helmet
Wearing a helmet can prevent a severe head injury. Whenever riding a
POLARIS vehicle, always wear a helmet that meets or exceeds estab-
lished safety standards.
Approved helmets in the USA and Canada bear a U.S. Department of
Transportation (DOT) label.
Approved helmets in Europe, Asia and Oceania
bear the ECE 22.05 label. The ECE mark consists
4
E
of a circle surrounding the letter E, followed by the
distinguishing number of the country which has
granted approval. The approval number and serial
number will also be displayed on the label.
051039
0006.31
Eye Protection
Do not depend on eyeglasses or sunglasses for eye protection. When-
ever riding a POLARIS vehicle, always wear shatterproof goggles or
use a shatterproof helmet face shield. POLARIS recommends wearing
approved Personal Protective Equipment (PPE) bearing markings such
as VESC 8, V-8, Z87.1, or CE. Make sure protective eye wear is kept
clean.
Clothing
Be prepared, be warm and be com-
fortable when riding. Be aware of
the weather forecast, especially the
windchill, and dress accordingly.
See the chart on page 23.
WARNING! Avoid wearing loose
clothing or long scarves, which can
become entangled in moving parts and
cause serious injury. Always wear an
approved helmet and eye protection.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Rider Capacity
Your snowmobile is designed for up to two riders. A decal on the
console indicates that the vehicle is designed for one operator and one
passenger only.
WARNING! Operating improperly with a passenger could cause loss of control
and result in serious injury or death. Control becomes more difficult with two
people on board. More space is required to make turns, and longer distances
are needed for stopping. Make sure the passenger remains seated behind the
driver, facing forward, with both feet placed firmly on the running boards. Slow
down and avoid “jumping” the snowmobile.
Snowmobiles designed for two riders should never be operated with
more than two people on board. Slow down! Control becomes more dif-
ficult with two people on board. More space is required to make turns,
and longer distances are necessary for stopping.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Cargo Capacity
See page 32 for cargo loading information.
WARNING! Overloading the cargo carrier can cause loss of control resulting in
severe injury or death. The maximum cargo carrier capacity is 75 lbs. (34 kg).
Never exceed the cargo carrier capacity.
Disabled Operators
Safe operation of this rider-active vehicle requires good judgement and
physical skills.
WARNING! Operators with cognitive or physical disabilities have an increased
risk of loss of control, which could result in serious injury or death. Do not allow
disabled persons to operate this vehicle.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Excessive Speed
WARNING! High speed driving, especially at night, could result in serious injury
or death. Always reduce speed when driving at night or in inclement weather.
Always be alert and pay attention to the trail ahead. If your speed is 40
MPH (16 km/h), your snowmobile is traveling about 60 feet (18 m) per
second. If you look back for only two seconds, your snowmobile will
travel about 120 feet (36 m). If your speed is 60 MPH (96 km/h), your
snowmobile will travel about 180 feet (55 m) in two seconds.
Traveling at night requires extra caution. Check headlight and taillight
to ensure proper operation, and don’t over-drive your headlight beam.
Always be able to bring your snowmobile to a stop in the distance illu-
minated by the headlight.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Driver Awareness
Slow down when traveling near poles,
posts, or other obstacles. Be especially
alert if you’re snowmobiling after dark.
Always be on the alert for wire fences.
Single strands are especially dangerous,
since there may be a great distance
between posts. Guy wires on utility poles
are also difficult to distinguish.
Make sure the way is clear before crossing
railroads and other roads and highways.
The noise of your snowmobile will drown
out the sound of approaching vehicles.
Look ahead, behind, and to both sides
before turning or crossing railroad tracks
or highways. Steep embankments may
also hide your view. Always leave yourself
a way out.
R R
Variances in snow depth and/or water currents may result in uneven ice
thickness. You may drown if you break through the ice. Never travel on
frozen bodies of water unless you have first verified that the ice is suffi-
ciently thick to support the weight and moving force of the snowmobile,
you and your cargo, together with any other vehicles in your party.
Always check with local authorities and residents to confirm ice condi-
tions and thickness over your entire route. Snowmobile operators
assume all risk associated with ice conditions on frozen bodies of water.
When teaching inexperienced operators to ride, set up a predetermined
course for practice. Make sure they know how to drive and control the
snowmobile before allowing them to make longer trips. Teach them
proper snowmobile courtesy, and enroll them in driver’s training and
safety courses sponsored by local or state organizations.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Avalanches
Snowmobilers should always be properly trained and equipped before
traveling in mountainous terrain:
• Take an avalanche class
• Travel with experienced people
• Travel on designated trails
• Make sure each person is equipped
with a shovel, probe and avalanche
beacon.
You don’t have to be snowmobiling on a
slope for an avalanche to occur. Be aware
that all of the snow is connected. You may be riding on a flat slope or
snow covered road, but if the snowpack above is unstable enough you
can trigger an avalanche on a steeper slope above you. Always be aware
of snow conditions above you as you travel in mountainous terrain.
Before riding in mountainous terrain, call or log on to your local ava-
lanche advisory to get current weather and snow stability information.
For more information about avalanche training and avalanche condi-
tions, contact local law enforcement in your area, or visit the American
and Canadian online avalanche centers at www.avalanche.org.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Ice and Snow Build-up
WARNING! Ice and snow build-up may interfere with the steering of your
snowmobile, resulting in serious injury or death. Keep the underhood area free
of snow and ice.
Before driving, manually turn the skis to the left and right to be sure ice
and snow are not interfering with full left and right steering. If difficulty
is encountered, remove ice and snow build-up that may be obstructing
the steering linkage.
Driving Downhill
When riding downhill, shift your weight to the rear of the snowmobile
and reduce your speed to a minimum. Apply just enough throttle to keep
the clutch engaged, allowing the engine’s compression to help slow the
snowmobile and keep it from rolling freely downhill.
WARNING! When driving on long downhill stretches, pump the brakes. Riding
the brakes may cause the brake system to overheat, which may result in brake
failure. Excessive or repetitive use of the brakes for high speed stops will also
cause an overheated brake system. This condition may lead to a sudden loss of
brakes and/or fire and may result in serious injury or death.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Driving on Slippery Surfaces
WARNING! Never attempt an abrupt change of direction when operating on
slippery surfaces. Proceed slowly and use extra caution. Driving on ice or hard-
packed snow reduces steering and braking control, which may result in loss of
control and serious injury or death. Slow down and use extra caution when
operating on slippery surfaces.
Driving in Hilly Terrain
WARNING! Climbing a hill or crossing the face of a slope may result in loss of
balance and snowmobile rollover, causing serious injury or death. Use caution
and good judgement when driving in hilly terrain.
Use extra caution when operating in hilly terrain. If climbing a hill is
unavoidable, keep your weight low and forward. If you must cross the
face of a slope, keep your weight on the uphill side of the snowmobile to
maintain proper balance and avoid possible rollover.
Slow down when reaching the crest of a hill. Be prepared to react to
obstacles, sharp drops or other people or vehicles that may be on the
other side of the hill.
If you’re unable to continue up a hill, turn the snowmobile downhill
before it loses momentum. If this isn’t possible, spin the track just
enough to dig in to prevent it from rolling back down the hill. Stop the
engine and set the parking brake (if equipped). Keeping away from the
downhill side of the snowmobile, pull the rear of the snowmobile
around and point the front end and skis downhill. Remount the snowmo-
bile, restart the engine, release the parking brake, and descend the hill
carefully.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Drive Belt
Do not operate the engine with the drive belt removed.
CAUTION! Operation of the engine with the belt removed may result in
personal injury or damage to the engine.
Any servicing that requires operation without a belt must be performed
by your dealer.
Intake Silencer
Do not operate the engine with the intake silencer or filter removed.
NOTICE: Damage to the engine may occur if the intake silencer or filter are
removed.
Clutches
Do not attempt to service the clutches.
All clutch service must be performed by your dealer. The clutch is a
complex mechanism that rotates at high speeds. Each clutch is dynami-
cally balanced before installation. Any tampering may disrupt this preci-
sion balancing and create an unstable condition.
Cold Weather Drive-Away
Whenever your snowmobile has been parked for a length of time, espe-
cially overnight, always make sure the skis and track are loosened from
ice and snow before attempting to drive. Warm the drive belt by allow-
ing the engine to idle in neutral for several minutes. Apply the throttle
with enough authority to put the snowmobile into motion, but always
operate within safety limits and, on 2-up machines, with respect for a
passenger.
If the snowmobile is carrying a load and is equipped with a high/low
transmission, drive in low gear the first several feet, then stop and shift
to high gear.
Maneuverability
While much control and maneuverability is achieved through the steer-
ing system and skis, maximum control is achieved by the shifting of
your body weight. Maneuverability will change for lighter operators or
snowmobiles designed to carry a load or a passenger.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Inadequate Snow Conditions
Since snow provides the only lubrication for the power slide suspension
and, on liquid cooled models, cooling for the engine, adequate snow
cover is a requirement for operation of your snowmobile.
NOTICE: Driving in too little snow will result in excessive wear and damage to
the slide rail, track and/or engine.
WARNING! Inadequate cooling and lubrication will lead to overheating of the
slide rail and track, causing premature wear, damage and failure, which can
result in serious injury. Reduce speeds and frequently drive into fresh snow to
allow adequate cooling and polishing of the slide rail and track surfaces. Avoid
operating for prolonged periods on ice, hard-packed surfaces or roads.
Operating in Deep Snow
If the snowmobile becomes stuck in snow, clear the running board area
of snow, then step down the snow in front of the snowmobile so that
when the throttle is opened, the snowmobile will be able to climb up and
over the snow.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Driving Responsibly
Every snowmobile handles differently, and even the most docile condi-
tions may become dangerous if operators drive improperly. If you’re
new to snowmobiling, acquaint yourself with the machine and with
what it will and won’t do under various conditions. Even seasoned driv-
ers should spend some time getting the feel for a machine before
attempting ambitious maneuvers.
• A snowmobile depends on the rider’s body position for proper bal-
ance in executing turns, traversing hills, etc. Always start on a
smooth, level area to begin building your operating experience.
• Before allowing someone else to use your snowmobile, know the
extent of their operating skills. Check to see if they’ve taken a snow-
mobile safety course and have an operator’s certificate. For their pro-
tection, as well as yours, make sure they take a snowmobile safety
course. Everyone can benefit from the course.
• Don't "jump" your snowmobile over large drifts or similar terrain.
Jumping may injure your back because of spinal compression that
could occur when the snowmobile impacts the ground. The seat and
suspension of your snowmobile have been designed to provide pro-
tection under normal riding conditions. Your snowmobile is not
intended for this kind of use.
• Be courteous to oncoming traffic by dimming your headlights and
reducing your speed.
• When traveling in a group of snowmobiles, don’t tailgate (follow too
closely). Leave enough distance between snowmobiles to provide
ample stopping room and to provide protection from flying snow and
debris. Allow even more distance when driving on slippery surfaces
or when driving in darkness or other low visibility conditions. Be
aware of any snowmobile traffic around your vehicle. Drive defen-
sively to avoid accidents.
• Remove the key from the ignition when you leave the snowmobile
unattended.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Operator Safety
Windchill/Temperature Charts
The following information is provided to help you determine when tem-
peratures become dangerous for riding.
WIND CHILL CHART (°F)
Wind
Speed
in
Actual Thermometer Reading (°F)
-5 -10 -15 -20 -25 -30 -35 -40 -45
Equivalent Temperature (°F)
-5 -10 -15 -20 -25 -30 -35 -40 -45
-5 -11 -16 -22 -28 -34 -40 -46 -52 -57 -63
40 35 30 25 20 15 10
5
0
MPH
Calm 40 35 30 25 20 15 10
5
0
5
36 31 25 19 13
7
3
0
1
10
15
20
25
30
35
40
45
50
55
60
34 27 21 15
32 25 19 13
30 24 17 11
9
6
4
3
1
0
-4 -10 -16 -22 -28 -35 -41 -47 -53 -59 -66 -72
-7 -13 -19 -26 -32 -39 -45 -51 -58 -64 -71 -77
-2 -9 -15 -22 -29 -35 -42 -48 -55 -61 -68 -74 -81
-4 -11 -17 -24 -31 -37 -44 -51 -58 -64 -71 -78 -84
-5 -12 -19 -26 -33 -39 -46 -53 -60 -67 -73 -80 -87
-7 -14 -21 -27 -34 -41 -48 -55 -62 -69 -76 -82 -89
29 23 16
28 22 15
28 21 14
27 20 13
26 19 12
26 19 12
25 18 11
25 17 10
9
8
7
6
5
4
4
3
-1 -8 -15 -22 -29 -36 -43 -50 -57 -64 -71 -78 -84 -91
-2 -9 -16 -23 -30 -37 -44 -51 -58 -65 -72 -79 -86 -93
-3 -10 -17 -24 -31 -38 -45 -52 -60 -67 -74 -81 -88 -95
-3 -11 -18 -25 -32 -39 -46 -54 -61 -68 -75 -82 -89 -97
-4 -11 -19 -26 -33 -40 -48 -55 -62 -69 -76 -84 -91 -98
Frostbite in >> 30 min. 10 min. 5 min.
WIND CHILL CHART (°C)
Wind
Speed
in
Actual Thermometer Reading (°C)
5
2
-1 -4 -7 -10 -13 -16 -19 -22 -25 -28 -31 -34 -37 -40 -43 -46
Equivalent Temperature (°C)
Km/h
Calm
8
5
3
2
1
0
2
0
-1 -4 -7 -10 -13 -16 -19 -22 -25 -28 -31 -34 -37 -40 -43 -46
-4 -7 -11 -14 -18 -22 -25 -29 -32 -36 -39 -43 -46 -50 -53 -57
16
24
32
40
48
56
64
72
80
88
96
-2 -6 -10 -13 -17 -21 -24 -28 -32 -36 -39 -43 -47 -50 -54 -58 -62
-3 -7 -11 -15 -19 -22 -26 -30 -34 -38 -42 -45 -49 -53 -57 -61 -65
-4 -8 -12 -16 -20 -24 -28 -32 -36 -39 -43 -47 -51 -55 -59 -63 -67
-1 -5 -9 -13 -17 -21 -25 -29 -33 -37 -41 -45 -49 -53 -57 -61 -65 -69
-1 -5 -9 -13 -18 -22 -26 -30 -34 -38 -42 -46 -50 -54 -58 -62 -66 -70
-2 -6 -10 -14 -18 -22 -26 -31 -35 -39 -43 -47 -51 -55 -59 -64 -68 -72
-2 -6 -10 -15 -19 -23 -27 -31 -35 -40 -44 -48 -52 -56 -61 -65 -69 -73
-2 -7 -11 -15 -19 -23 -28 -32 -36 -40 -45 -49 -53 -57 -61 -66 -70 -74
-3 -7 -11 -15 -20 -24 -28 -33 -37 -41 -45 -50 -54 -58 -62 -67 -71 -75
-3 -7 -12 -16 -20 -24 -29 -33 -37 -42 -46 -50 -55 -59 -63 -67 -72 -76
-3 -8 -12 -16 -21 -25 -29 -34 -38 -42 -47 -51 -55 -60 -64 -68 -73 -77
Frostbite in >> 30 min. 10 min. 5 min.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Safety Decals and Locations
Warning decals have been placed on the snowmobile for your protec-
tion. Read and follow the instructions of the decals and other warnings
on the snowmobile carefully. If any of the decals depicted in this manual
differ from the decals on your snowmobile, always read and follow the
instructions of the decals on the snowmobile.
If any decal becomes illegible or comes off, contact your POLARIS
dealer to purchase a replacement. Replacement safety decals are pro-
vided by POLARIS at no charge. The part number is printed on the
decal.
Clutch Warning
This warning decal is found under the hood on the air plenum:
WARNING
Do not operate with hood open.
Do not attempt adjustment with engine running.
Do not operate engine with plenum/belt guard removed.
Never run engine with drive belt removed.
Never service clutches yourself. See your dealer.
Pressure Cap Warning
This warning decal is found under the hood on the pressure cap of appli-
cable liquid cooled models:
WARNING
Do not open hot. Test or replace when changing coolant. Press
down and turn to release cap. 13 PSI
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Safety Decals and Locations
Passenger Warning
Snowmobiles designed for an operator and one passenger have a warn-
ing decal on the console. For more information on operating with a pas-
senger, see page 13.
WARNING
This vehicle is designed for operator and “ONE” passenger only.
Track Warning
WARNING
Track
Warning
Stay clear of track. Do
not sit on seat back.
Entanglement with the
track or a fall from seat
back may result in
severe injury or death.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Safety Decals and Locations
Reverse
Warning
Operation
Warning
Reverse Warning
POLARIS snowmobiles equipped with standard reverse and will have
this decal on the console:
WARNING
Reverse operation, even at low speeds, can cause loss of control
resulting in serious injury or death. To avoid loss of control,
always:
• Look behind before and while backing up.
• Avoid sharp turns.
• Shift to or from reverse only when stopped.
• Apply throttle slowly.
NOTE: For more information, see Owner's Manual.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
Safety Decals and Locations
Operation Warning
An operation warning decal is present on the console of all POLARIS
snowmobiles:
WARNING
• To avoid serious injury or death, read and understand all warnings
and the Owner’s Manual before operation. If manual is missing, con-
tact a POLARIS dealer for a replacement.
• This vehicle is capable of high speeds. Buried objects or uneven
terrain can cause loss of control. Reduce speed and use extreme
caution when operating in unfamiliar terrain.
• Excessive speed, especially at night or with limited visibility, can
result in insufficient time for you to react to terrain changes, to
avoid unexpected obstacles, or to stop safely.
• Never consume alcohol or drugs before or while operating this vehi-
cle.
• In an emergency, push down the Auxiliary Shut-Off Switch, located
on the top of the throttle control assembly, to stop the engine. Then
pull the brake lever to stop.
• Always wear an approved helmet, eye protection, and adequate
clothing while operating this vehicle.
• This vehicle is designed for adult use only. Check local laws for age
requirements.
• When operating with a passenger (on approved models only),
reduce speed and allow extra space for steering and stopping. A
passenger reduces your ability to control the vehicle.
• When operating on hard-packed snow, ice, or when crossing roads,
steering and braking ability are greatly reduced. Reduce speed and
allow extra space to turn or stop.
• To maintain vehicle control on ice or hard-packed surfaces, you
should have a proper balance of ski carbides to track studs. See
Owner’s Manual for proper use of traction products.
• Repeated stops from high speed may cause fading or sudden loss
of braking ability.
• Parking brake may relax when used for long periods. Do not leave
brake engaged for more than five minutes.
• Before starting the engine, check throttle, brake, and steering for
proper operation. Make sure hood is latched. Be seated and in posi-
tion to control the vehicle.
Oil injection system: Use unmixed fuel only. Check oil level when
refueling.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
8
7
9
10
6
11
12
5
13
14
4
3
2
15
16
1
19
17
18
1. Nosepan
2. Skis
3. Front Bumper
4. Hood
5. Headlight
6. Windshield
7. Mountain Bar
8. Handlebar
9. Seat
11. Taillights
12. Cargo Carrier
13. Rear Bumper
14. Snow Flap
15. Track
16. Suspension
17. Passenger Grab Handle
18. Seat Latch
19. Fuel Filler Cap
10. Backrest
28
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
2
1
5
4
6
3
7
8
11
10
9
12
14
13
1. Glove Box
2. MFD Display
3. Ignition Switch
4. Shifter
5. Recoil Starter Handle
6. Brake Lever
8. Thumbwarmer Switch
9. Throttle Control
10. Engine Stop Switch
11. Electronic Reverse Button
12. MFD Control Switch
13. Headlight Dimmer Switch
14. Parking Brake Lock
7. Handlebar Grip Warmer
Switch
29
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Backrest
The backrest can be adjusted for rider comfort. Whenever making
adjustments, always make sure all lock levers are securely locked before
operating.
Tip: If an adjustment is difficult, rotate the lock levers counter-clockwise to
relieve tension, then make the adjustment. Always tighten the levers after
adjusting.
Height Adjustment
B
1. Lift the upper lock levers (A)
on both backrest supports to
release the locks.
2. Raise or lower the backrest to
the desired position.
3. Push the lock levers inward to
secure the locks. Rotate
A
C
levers clockwise to tighten.
Angle Adjustment
1. Lift the lock lever at the center of the backrest (B).
2. Tilt the backrest forward or rearward to the desired position.
3. Push the lock lever inward to secure the lock.
Operator/Passenger Conversion
1. Lift the lower lock levers (C) on both backrest supports to release
the locks.
2. Move the backrest forward for operator use or rearward for
passenger use.
3. Push the lock levers inward to secure the locks. Rotate levers clock-
wise to tighten.
Adjustable Headlights
Move the headlight adjuster to raise or
lower the headlight beam.
• Move the adjuster to the left to lower
the beam.
• Move the adjuster to the right to raise
the beam.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Shifter
Shifter
For normal operation, place the
transmission in high gear. When-
ever towing or operating with a
heavy load, place the transmission
in low gear. See page 73. When
operating in low gear, vehicle speed
will be limited to protect the drive
train.
Glove Box
The glove box is a heated dry stor-
age area intended for drying wet
gloves. Do not use the glove box for
items that could be damaged by
heat.
Glove Box Latch
Turn the knob to release the glove box cover latch and open the cover.
Seat Latch
Release the seat latch and raise the seat to
access the battery and under-seat storage
area.
Check the seat latch before each use of
the snowmobile. Push downward on the
seat near the seat latch, then attempt to
raise the seat by pulling upward on the
Seat Latch
right-hand passenger grab handle. Make
sure the latch is secure before riding.
Under-Seat Storage
When using the under-seat storage area
to transport supplies and other items,
pack the items securely to prevent them
from moving around in the storage area.
Smaller items should be placed in bags or
containers to keep them secure.
Storage Area
31
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
12-Volt DC Outlet
Use the 12-volt DC outlet to power a global positioning sensor (GPS),
heated helmet shield, utility light, cell phone or other accessories. The
outlet is located on the console near the ignition switch.
Cargo Carrier
Whenever towing or operating with a heavy load, place the transmission
in low gear. See page 73.
WARNING! Overloading or towing
improperly can alter vehicle
handling and can cause loss of
control.
Cargo Carrier
• Do not exceed the cargo carrier
capacity.
• Always reduce speed and allow
greater distance for braking and
turning when carrying cargo or a
passenger, or when towing.
• Always secure cargo before
operating vehicle.
• Overloading or carrying tall, off-
center, or unsecured loads will
increase your risk of losing con-
trol. Loads should be centered,
carried as low as possible, and firmly secured to the carrier.
• Be careful if load extends over the side of the carrier.
The maximum weight capacity for the cargo carrier is 75 lbs. (34.1 kg).
Do not allow a passenger to sit on the seat back or in the cargo carrier.
NOTICE: Do not drive aggressively or jump your vehicle when operating with
heavy loads in the cargo carrier. This may cause vehicle damage.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Fuel Resistor
This snowmobile is equipped with a feature that allows the engine con-
troller to select the proper operating software based on the type of fuel
being used. See pages 62-63 for fuel information and recommendations.
Make sure the correct resistor is installed for your fuel choice as
instructed below.
PREMIUM NON-ETHANOL Resistor
To achieve maximum performance, install this resistor to the ECU fuel
designation connector when using:
•
Non-ethanol gasoline with a 91+ octane rating
10% ETHANOL Resistor
This resistor must be installed when using:
•
•
Ethanol gasoline
MTBE gasoline
•
•
Other forms of oxygenated gasoline
Any fuel less than 91 octane
Whenever in doubt of your fuel purchase, use the “10% ETHANOL”
resistor as a safeguard.
The resistor is installed into the wiring harness on the left side of the
snowmobile just above the top of the oil bottle. To change resistors,
unplug the resistor and rotate it to align and install the appropriate plug
to the connection.
NOTICE: Engine damage may occur if ethanol fuel is used while the non-etha-
nol fuel resistor is installed. The check engine light may also display in
this condition as this could cause detonation.
ETHANOL, MTBE, OR OTHER
OXYGENATED GASOLINE (Factory Delivery)
ANY FUEL WITH ETHANOL or LESS THAN
10% ETHANOL
91 OCTANE (87 Octane Minimum)
Resistor Installed
NON-ETHANOL GASOLINE
91+ OCTANE
(Maximum Performance)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Detonation Elimination Technology (DET)
The DET system prevents damage to the engine from detonation by
going into an engine protection mode whenever the DET system is
active. When excessive detonation is detected, the check engine light
will illuminate, flicker or flash momentarily..
Check Engine Light Status
Indicates
Detonation detected
Solid or Flickering
Flashing
Severe detonation detected, RPM will
be limited
You may notice decreased engine RPM and performance when DET is
activated, but in most cases DET activation is temporary, and the timing
will return to normal automatically.
If severe detonation occurs, the check engine light will begin to flash.
The engine will enter a limp home mode (and RPM will be limited to
6500 RPM) and stay in this mode until the engine is shut down and
restarted.
The most likely causes of severe detonation are shown in the table
below. Refer to the table for troubleshooting information.
DET Troubleshooting
Cause of DET Activation
Poor quality fuel
Solution
Replace with higher quality fuel
Incorrect ethanol/non-ethanol fuel
resistor installed
Verify correct fuel resistor for fuel type
in tank
Low fuel/no fuel in tank
Water in fuel
Refuel with recommended fuel
Replace with recommended fuel
Plugged fuel filter or tank pick-up sock See your POLARIS dealer for service
Alcohol-based fuel additive used with Do not add de-icers or additives that
Ethanol fuel
contain any form of alcohol while
using up to 10% ethanol fuel
Improper engine modifications
Do not modify the engine
34
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Component Identification
Item
2
1
1
2
3
4
5
6
7
Analog Gauge (if equipped)
Digital Gauge
Check Engine Indicator
High Temp Indicator
Brake Indicator
Reverse Indicator
3
7
High Beam Indicator
6
4
5
Digital Display Identification
Item
1
RPM or Speed
Altitude (if equipped)
Service Interval
1
2
2
3
Electrical System Voltage
Level
MAX -Maximum MPH/
KPH or RPM
MPH -Miles per hour
KPH - Kilometers per hour
RPM -Engine crankshaft
revolutions per
minute
4
Air Temp (if equipped)
Engine Temp
Degrees Celsius
Degrees Fahrenheit
7
5
6
5
6
Miles/Kilometers
4
3
Hours
Trip 1/Trip 2/Trip F
Service Label
Altitude Label
7
Fuel Level
35
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Settings
The MFD control switch allows you
to set the MFD display to your pref-
erences. The rocker switch has a
MODE button (top) and a SET but-
ton (bottom). Specific instructions
are outlined on the following pages.
MFD settings can be made with the
engine running or with the engine
off. If the engine is off, make sure
the stop switch is pressed down, and
turn the ignition key to the START
position briefly to activate the
gauge. The gauge will illuminate for
about 90 seconds.
MFD
Control
Switch
MODE
SET
Standard vs. Metric
The MFD will display either standard or metric units of measurement.
While viewing a screen that displays measurements (MPH, km/h or
temperatures), press and hold the MODE switch until the unit of mea-
surement changes (about 10 seconds).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Settings
Speedometer/Tachometer
If your model is equipped with both analog and digital displays, the
speedometer and tachometer can be viewed in either display. If the ana-
log display is set to show speedometer readings, the digital screen will
automatically display the tachometer (option 1). If the analog is set to
show the tachometer, the digital screen will show the speedometer
(option 2).
To change viewing preferences, press and hold the MODE button for
three seconds. When the button is released, the new setting becomes
active and screen colors change. See table below.
Analog
Display
Digital
Display
Analog
Screen
Digital
Screen
Option
1
Speed
RPM
RPM
Blue “MPH”
Blue
Backlight
2
Speed
Red
“X100RPM”
Red
Backlight
37
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Digital Display Programs
Press and release the MODE button to cycle through the three MFD pro-
grams: Performance, Engine and History. Each program remains active
until you cycle to the next program. While any program is active, press
and release the SET button to cycle through the program’s screens.
Performance Program
Press and release the MODE button until the performance program
screen is active. The default display for this screen includes electrical
system voltage (unless equipped with ACE suspension adjustment), fuel
level (if equipped) and either speed or tachometer, whichever is
selected. See page 37.
Press and release the SET button to cycle through the following screens:
odometer, trip 1 odometer, trip 2 odometer, fuel trip odometer (if fuel is
low) and clock (if equipped). Use the following procedures to make
changes to these screens.
Odometer Setting
The odometer records the vehicle's total
distance traveled since manufacture. The
odometer cannot be reset.
Trip Settings
Trip 1 and Trip 2 are odometers used
to check fuel mileage or to keep
track of distance traveled. Both
odometers can be reset to zero.
1. Enter the Performance Program.
2. Press and release the SET button
until the desired trip screen is
active.
3. Press and hold the SET button for two seconds to reset the trip
odometer to zero.
4. Press and release the SET button to cycle through additional
screens.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Digital Display Programs
Performance Program
Trip Settings
Trip F automatically displays when the
fuel level is low if the snowmobile is
equipped with an electronic fuel gauge.
The fuel symbol and the last fuel bar on
the MFD gauge (if equipped) will blink
when the fuel level reaches 1/8 of a tank.
The Trip F odometer records distance
traveled, and the fuel symbol continues
to blink, until enough fuel is added to
raise the level above 1/4 of a tank. The
Trip F odometer will automatically reset
to zero after refueling.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Digital Display Programs
Performance Program
Clock Setting (if equipped)
1. Enter the Performance Program.
2. Press and release the SET button
until the clock screen is active.
3. Press and hold the SET button for
five seconds.
4. When the hour starts flashing,
press the SET switch once to advance one hour. (Press and hold the
SET button to advance the hours quickly.)
5. Press and release the MODE button to save the hour. The minutes
will begin flashing.
6. Set the minutes in the same manner.
7. When finished, press and release the MODE button to save the new
setting. If the MODE button is not pressed within ten seconds, the
gauge will automatically save the new entry.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Digital Display Programs
Engine Program
Press and release the MODE button until the engine program screen is
active. The default display for this screen includes engine hours, electri-
cal system voltage level, fuel level (if equipped) and either engine cool-
ant temperature, air temperature (accessory) or altimeter (accessory).
Press and release the SET button to cycle through the following screens:
hour meter, engine temperature, air temperature (available as an acces-
sory), altimeter (available as an accessory) and turbo boost (if
equipped).
Hour Meter
The hour meter records the total hours of
engine operation since manufacture. This
meter cannot be reset.
Engine Temperature
A thermometer measures water temperature,
giving an indication of engine temperature.
Air Temperature (if equipped)
The MFD displays actual air temperature in
either standard or metric units.
1. Enter the Engine Program.
2. Press and hold the MODE switch for ten
seconds to switch between standard and
metric units of measurement.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Digital Display Programs
Engine Program
Altitude (if equipped)
The rider can calibrate the altimeter for current
atmospheric conditions. Altimeter accuracy
will be +/-300 ft. (91 m) after adjustment.
1. Enter the Engine Program.
Tip: Press and hold the MODE switch for ten sec-
onds to switch between standard and metric
units of measurement. When "ALt" displays,
the program is in the metric mode.
2. Press and release the SET button until the altimeter screen is active.
3. Press and hold the SET button for five seconds. When the digits
begin to flash, release the button.
4. Press and release the SET button once to advance 50 feet (15 m).
Tip: Press and hold the SET button to advance quickly by 100-foot (30 m) incre-
ments.
5. Adjust the altitude display to within 50 ft. (15 m) of current altitude.
Tip: The gauge reads barometric pressure and allows the rider to compensate
for daily fluctuations in air pressure. The gauge can adjust the displayed
altitude to +/- 1300 ft. (396 m) from the preset value. It will adjust up to
+1300 ft. (396 m) above the calibrated altitude. Once the +1300 ft. (396 m)
offset has been reached, the next adjustment is -1300 ft. (396 m) from the
calibrated altitude, and 50 ft. (15 m) will be added to the altitude each time
the SET button is pressed.
6. Press and release the MODE button to set the reading at the adjusted
value. If the MODE button is not pressed within ten seconds, the
gauge will automatically save the new entry.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Digital Display Programs
History Program
Press and release the MODE button until the history program screen is
active. This screen will always display electrical system voltage level
and fuel level (if equipped).
Press and release the SET button to cycle through the Maximum Vehicle
Speed, Maximum Engine RPM and Service Interval Reminder screens.
Maximum Speed/Maximum RPM
The gauge automatically logs the maximum
speed and engine RPM even if the history
program is not active in the display.
1. Enter the History Program.
2. Press and release the SET button until
one of the two screens is active.
Tip: The MPH and RPM values are both reset at
the same time. Reset the values before each
run to obtain accurate readings.
3. Press and hold the SET button for three
seconds to reset the recorded maximum
values for both MPH and RPM.
Tip: Due to electrical noise, the MFD may occa-
sionally display MAX MPH/RPM values that
are not representative of actual values.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Digital Display Programs
History Program
Service Interval Reminder
The gauge logs the number of engine
hours accumulated between service
reminders. When the logged hours
reaches the designated service interval
(set by the user), the gauge provides a
reminder that service is due. “SErVCE”
will flash in the odometer area and
“ENG” will flash in the icon area for five
seconds each time the engine is started
(until the service reminder is reset.) Use
the following procedures to reset the
reminder.
To reset the reminder at the existing interval:
1. Enter the History Program.
2. Press and release the SET button until the service interval screen is
active.
3. Press and hold the SET button for ten seconds, continuing to hold
even after the display begins to flash.
4. When the display stops flashing, release the button. The service
interval has been reset.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Instrumentation
MFD Digital Display Programs
History Program
Service Interval Reminder
To reset the reminder at a new interval:
1. Enter the History Program.
2. Press and release the SET button until the service interval screen is
active.
3. Press and hold the SET button for five seconds, until the hours begin
to flash. Immediately release the button.
4. Press the button again, up to five times, to advance the reminder in
50-hour increments.
Tip: The maximum interval is 250 hours.
5. Press and release the MODE button to save the new settings.
To disable the service interval reminder:
1. Press the SET button once after reaching 250 hours on the display.
The gauge will display "OFF".
Gauge Cleaning
1. Wipe the gauge face as needed using a clean cloth and a mild soap
and water solution. Wipe dry with clean, soft cloth.
2. Clean the back side of the gauge using a clean cloth and a mild soap
and water solution. Do not remove the electrical connectors or pro-
tective rubber boot. Do not spray the back side of the gauge or the
wire harness with a pressure washer or other water source.
NOTICE: To prevent damage to the lens, do not use alcohol for cleaning. Do not
allow chemicals or sprays to contact the lens. Immediately clean off
any gasoline that splashes on the gauge during refueling.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PERFECT FIT
IQ Front Suspension Adjustments
Independent Front Suspension (IFS)
Break in the suspension for approximately 150 miles (240 km) before
making any fine-tuning adjustments.
Settings will vary from rider to rider, depending on rider weight, vehicle
speed, riding style, and trail conditions. We recommend starting with
factory settings and then customizing each adjustment individually to
suit rider preference. The snowmobile should be methodically tested,
one change at a time, under the same conditions (trail and snow condi-
tions, vehicle speed, riding position, etc.) after each adjustment until the
best ride is achieved.
IFS Components
1. Skis
2. Front shocks and springs
3. Rod ends
4. A-arms
IFS Adjustment Options
• Front shock spring preload
• Optional springs
2
1
3
4
• Toe (ski alignment) (see page 106)
• Camber (see your dealer)
Front Shock Spring Preload
The factory preload setting should be appropriate for most riders and
conditions. Please see your POLARIS dealer for assistance before
attempting to adjust preload.
Increasing the spring preload too much may adversely affect the han-
dling of the snowmobile and the performance of the rear suspension.
Decreasing the spring preload too much may allow the lower spring
retainer to fall off.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PERFECT FIT
Rear Suspension Adjustments
Rider weight, cargo weight, riding style, trail conditions and vehicle
speed all affect suspension action.
Each rear suspension can be adjusted to suit rider preference and deliver
the best performance for a given set of conditions. However, all suspen-
sion designs and adjustments involve a compromise, or trade-off. For
example, a suspension set up for snow-cross racing would provide a
very stiff ride on the trail. A suspension set up for trail riding would bot-
tom out harshly on a snow-cross course.
Make adjustments to one area at a time so you can evaluate the change.
For further assistance, please see your POLARIS dealer.
Suspension Performance Tips
• Rider weight usually determines the position at which the spring pre-
load should be set. However, this may vary with riding style. With a
little experimentation, each rider can find a preferred set-up. These
adjustments are easy to make, involve very little time or effort, and
greatly affect the ride.
• In deep snow, a new rail slide will offer improved performance over a
worn slide. It can also improve top speed.
• POLARIS offers track kits for improved flotation in deep snow. See
your dealer for assistance.
Tip: Keep the suspension pivot points lubricated. This will reduce moisture and
rust build-up and ensure proper function of the suspension components.
Grease rear suspension pivots before adjusting the rear suspension. Refer
to the suspension lubrication information beginning on page 80.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PERFECT FIT
Rear Suspension Adjustments
Initial Spring Preload Setting (Sag Method)
To set up the rear suspension torsion spring preload, measure the dis-
tance between the ground and rear bumper. This is measurement X.
Take the first measurement with no rider and with the rear suspension at
full extension.
Tip: The rear bumper may need to be raised slightly to fully extend the rear sus-
pension.
Next, have the rider drop down hard on the seat and bounce up and
down several times, collapsing the rear suspension. With the rider
seated, measure the distance between the ground and the rear bumper at
the exact location used for measurement X. This is measurement Y.
To determine sag, commonly referred to as ride-in, subtract measure-
ment Y from X (sag=X-Y). Adjust sag by rotating the torsion spring
preload cams located on the rear torque arm. See page 49.
The ideal amount of sag for this rear suspension is 2.5 inches (6.4 cm)
(X-Y=2.5 in./6.4 cm).
X
Y
With Rider
No Rider
48
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PERFECT FIT
Rear Suspension Adjustments
Torsion Spring Preload
To adjust rear torsion spring preload, rotate the three-position cam using
the engine spark plug tool. This adjustment is easier to make if tension
is relieved from the spring. Exercise extreme caution if you use this
method of adjustment, and follow the steps below carefully.
WARNING! A sudden release of tension from a spring could result in serious
injury. Wear eye protection and maintain a firm grip on the spring when
removing and installing it.
1. Grasp the spring firmly with both hands.
2. Maintain a firm grip on the spring and carefully remove the long leg
from the guide block. Be prepared for a sudden release of tension.
3. Carefully allow the leg to unwind and relieve tension from the cam.
4. Rotate the cam to the desired setting.
5. Rewind the long leg of the spring. Maintain a firm grip on the spring
while reinstalling it into the guide block.
Tip: Different rate torsion springs may be available if a firmer ride is desired.
Contact your dealer for more information.
The following information is provided only as a guideline to be used for
initial suspension set-up. Your set-up may vary based on your desired
riding style.
Soft (long end of cam to front)
Medium (short end of cam up)
Firm (long end of cam up)
Soft
Medium
Firm
49
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PERFECT FIT
Rear Suspension Adjustments
Limiter Strap Position (Ski Pressure)
The following information is
provided only as a guideline to
High
be used for initial suspension
Low
set-up. Your set-up may vary
based on your desired riding
style.
High: Limiter strap in high
position increases ski pressure
Low: Limiter strap in low
position decreases ski pressure
50
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PERFECT FIT
Rear Suspension Adjustments
Shock Compression Valving
The rear track shocks for this model are gas charged shocks. The valv-
ing on the gas charged shocks is pre-set.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PERFECT FIT
Handlebar Adjustments
Use the following steps to adjust handlebar angle at the handlebar block.
1. Remove the mountain bar.
2. Remove the handlebar cover.
Mountain
3. Using a 7/16" wrench, loosen
the four nuts on the bottom of
the adjuster block. Turn the
handlebar to the left or right for
access to the back nuts. If nec-
essary, pry the blocks apart
with a screwdriver.
Bar
Handlebar
Cover
4. Adjust the handlebar to the
desired height.
Adjuster
Block
Bolts
5. Be sure the handlebar, brake
lever and throttle lever operate
smoothly and do not hit the gas
tank, windshield or any other
part of the machine when
turned fully to the left or right.
If necessary, loosen the set
screws for the left and right
controls, rotate the controls
slightly, then tighten the set
screws to the proper torque.
Nuts
NOTICE: Do not stretch wires while adjusting the controls. Stretching the wires
could damage the handwarmers.
• Right control torque: 35 in. lbs. (3.95 Nm) +/- 10%.
• Left control torque: 24 in. lbs. (2.7 Nm) +/- 10%.
6. Torque the front bolts first, then torque the rear bolts. Torque the
bolts to 15-17 ft. lbs. (20-23 Nm).
7. Reinstall the handlebar cover.
8. Reinstall the mountain bar.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PERFECT FIT
Accessories
POLARIS offers a wide range of accessories for your snowmobile to
help make each ride more enjoyable.
Use only POLARIS parts and accessories on your POLARIS
snowmobile. Use of unapproved parts and accessories may result in:
• Non-compliance with government/industry requirements
• Voiding of warranty
• Injury to self or others
This applies, but is not limited to the following areas: brakes, clutches,
fuel systems, and exhaust systems. Exhaust systems are critical safety
areas that must use approved POLARIS parts. Please see your
POLARIS dealer for service.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-RIDE INSPECTIONS
Pre-Ride Checklist
Inspect all items on the checklist for proper operation or condition
before each use of the snowmobile. Procedures are outlined on the refer-
enced pages.
Item
See Page
Drive Belt Condition
Steering System
Brake Fluid
96
56
57
Brake Lever/Parking Brake Lock
Brake System
57, 58
89
Throttle Lever
55
Throttle Safety Switch
Auxiliary Shut-Off Switch (Engine Stop Switch)
Ignition Switch
55
61, 70
61, 67
61
Taillight/Brakelight/Headlight
Coolant Level
86
Gearcase Oil Level
79
Injection Oil Level
68
Radiator/Cooling Fins (clean and remove any debris)
Suspension Mounting Bolts
Skags (Wear Bars)
--
60
60, 107
60
Ski Saddle and Spindle Bolts
Hood Straps/Latches
56
Seat Latches
55
Rear Wheel Idler Bolts
Track Alignment/Condition
Rail Slide Condition
60, 103
59, 104
104
54
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-RIDE INSPECTIONS
Before Starting the Engine
Before starting the engine, always refer to all safety warnings pertaining
to snowmobile operation. Never start the engine without checking all
vehicle components to be sure of proper operation.
WARNING! Operating the vehicle with worn, damaged, or malfunctioning
components could result in serious injury or death. Never start the engine
without checking all vehicle components to be sure of proper operation.
Read and Understand Your Owner's Manual
Read the Owner's Manual completely and refer to it often. The manual
is your guide to safe and enjoyable snowmobiling experience.
Throttle Lever
The throttle and brake are the primary controls of your snowmobile.
Always make sure both are functioning properly.
Squeeze the throttle lever to make sure it compresses evenly and
smoothly. When released, the lever should immediately return to the
idle position without binding or hesitation. If the throttle does not func-
tion smoothly, or if you discover excessive lever freeplay, DO NOT start
the engine. Have the throttle serviced immediately.
Throttle Safety Switch
Test the throttle safety switch system before the snowmobile is operated.
See page 70 for procedure.
Seat Latch
Check the seat latch before each use of the snowmobile. Push downward
on the seat near the seat latch, then attempt to raise the seat by pulling
upward on the right-hand passenger grab handle. Make sure the latch is
secure before riding.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-RIDE INSPECTIONS
Before Starting the Engine
Hood Latches
The hood of the snowmobile protects the operator from moving parts as
well as aiding in sound emission control and other functions. Under no
circumstances should your snowmobile be operated with the hood open
or removed. Always ensure that the hood straps are in good condition
and that the latches are securely in place before operating the snowmo-
bile.
Steering System
WARNING! Ice and snow build-up may interfere with the steering of your
snowmobile, which could cause loss of control resulting in serious injury or
death. Keep the underhood area free of snow and ice.
Before driving, manually turn the skis to the left and right to be sure ice
and snow are not interfering with full left and right steering. If difficulty
is encountered, remove ice and snow build-up that may be obstructing
the steering linkage.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-RIDE INSPECTIONS
Before Starting the Engine
Brakes
Always check the following items for proper operation before starting
the engine.
Brake Lever Travel
Squeeze the brake lever. It
should move no closer to the
handgrip than 1/2" (1.3 cm).
1/2" (1.3 cm)
A smaller distance indicates
low brake fluid level or air in
the hydraulic system. See
pages 89-91 or see your
dealer for service.
Brake Lever Feel
If the brake lever feels “spongy” when squeezed, check the brake fluid
level and condition. Check for the presence of air in the fluid system.
See pages 89-91 or see your dealer for service.
WARNING! Continued use of “spongy” brakes may cause a complete loss of
brakes, which could result in serious injury or death. Always have the brakes
serviced at the first sign of sponginess.
Brake Fluid
Check the brake fluid in the mas-
ter cylinder before each ride.
Sight
Glass
Master
Cylinder
View the brake fluid level through
the sight glass on the top of the
master cylinder. The eye will
appear dark when the fluid level is
full. If the sight glass is any color
other than black, add brake fluid.
See page 90.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-RIDE INSPECTIONS
Before Starting the Engine
Parking Brake Lever Lock
Use the parking brake lever lock
only when you want the snowmo-
bile to remain stationary; for exam-
ple, when parked on an incline for a
period of five minutes or less.
Brake
Lever
Parking Brake
Lever Lock
Lock Engagement
To engage the lock, squeeze the
brake lever tightly and push for-
ward on the lock. Hold the lock for-
ward while releasing the brake
lever.
Tip: If the brake lever is squeezed tightly enough, the lock will move freely into
place. Do not force the lock or it may break.
The parking brake light on the gauge will light up if the parking brake
lever lock is set while the engine is running. It will also be lit when the
service brake is in use. If the parking brake light does not come on when
the parking brake or service brake is in use, have it serviced by your
dealer.
Lock Release
To release the lock, squeeze the brake lever tightly. The lock will return
to the unlocked position.
WARNING! If the parking brake lever lock is partially or entirely engaged while
riding, the brakes may overheat, resulting in brake damage. In extreme cases it
could cause a fire, which could result in serious injury or death. Always ensure
that the lever lock is completely disengaged before operating the snowmobile.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-RIDE INSPECTIONS
Before Starting the Engine
Track Inspection
WARNING! Operating the snowmobile with a damaged track increases the
possibility of track failure, which could cause loss of control resulting in serious
injury or death. Always inspect the track for damage before using the vehicle.
WARNING! Use of traction products such as studs increases the possibility of
track damage and/or failure. Driving at high speeds for extended periods of time
in marginal lubrication could severely damage track rods, break track edges,
and cause other track damage. Examples of marginal lubrication would include
frozen bodies of water without snow cover, icy trails, and no-snow conditions.
Track damage or failure caused by operation on ice or poor lubrication
conditions voids the track warranty.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-RIDE INSPECTIONS
Before Starting the Engine
Suspension Inspection
Loose nuts and bolts can reduce your snowmobile's reliability and cause
needless repairs and down time. Before beginning any snowmobile trip,
a visual inspection will uncover potential problems. Check the follow-
ing items on a weekly basis or before any long trip.
Item
Check
Page
Suspension mounting bolts
Rear idler wheel bolts
Rear idler adjusting bolt locknuts
Torque arm bolts
Tightness
Tightness
Tightness
Tightness
Tightness
Condition
Condition
Tension
--
103
--
--
Carrier and bogie wheel bolts
Front torque arm limiter strap
Rail slide
--
--
104
102
81
--
Track
All rear suspension components
Ski runner/skag
Lubrication
Condition
Tightness
Tightness
Ski spindle bolts
--
Tie rod end nuts
--
60
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-RIDE INSPECTIONS
Start the Engine and Check
Engine Stop Switch
Check the auxiliary shut-off switch for proper operation. Push the
switch down to stop the engine. Pull it up to allow restarting.
Ignition Switch
Make sure the engine stops when the ignition switch is turned to OFF.
Lighting
Check the headlight (high and low beam), taillight, and brake light.
Replace burned out lamps before operating.
Mirror Adjustment
If equipped, adjust your mirrors so they can be used to their full advan-
tage.
Operating Area
Before driving away, check your surroundings. Be aware of obstacles
and make sure bystanders are a safe distance from the snowmobile.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Fuel Safety
WARNING
Gasoline is highly flammable and explosive under certain conditions.
• Always exercise extreme caution whenever handling gasoline.
• Always refuel outdoors or in a well-ventilated area.
• Always turn off the engine before refueling.
• Do not overfill the tank. Do not fill the tank neck.
• Do not smoke or allow open flames or sparks in or near the area where refu-
eling is performed or where gasoline is stored.
• If gasoline spills on your skin or clothing, immediately wash it off with soap
and water and change clothing.
• Never start the engine or let it run in an enclosed area. Engine exhaust fumes
are poisonous and can cause loss of consciousness or death in a short time.
WARNING
The engine exhaust from this product contains chemicals known to cause can-
cer, birth defects or other reproductive harm. Operate this vehicle only outdoors
or in well-ventilated areas.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Fuel Recommendation
For peak performance, POLARIS recommends the use of 91 octane fuel
or higher. Although 87 octane fuel is usable, some engine performance
will be lost and fuel economy will decrease. Do not use lower than 87
octane fuel. Do not use fuel containing more than 10% ethanol. Never
use E85 in your snowmobile).
NOTICE: Operating with obstructed fuel systems will result in serious engine
damage. Always perform maintenance as recommended.
Prolonged exposure to petroleum based products may damage paint.
Always protect painted surfaces when handling fuel.
Fuel System Deicers
If you use non-ethanol fuel (sometimes labeled “non-oxygenated”),
POLARIS recommends the regular use of isopropyl-based fuel system
deicer. Add one to two ounces per gallon (8-16 ml per liter) of gasoline
to prevent damage resulting from fuel system icing. Never use deicers
or additives containing methanol. POLARIS also recommends the use
of Carbon Clean. See page 116 for the part numbers of POLARIS prod-
ucts.
If you use fuel with up to 10% ethanol (sometimes labeled “oxygen-
ated”) do not add deicers or additives that contain any form of alcohol.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Break-In Period
Engine Break-In
Always follow these recommended break-in procedures for new or
rebuilt engines. The first tank of fuel is considered the break-in period
for the engine.
Premix the first tank of fuel as outlined below. Oil added to the fuel and
oil injection systems will provide the necessary engine lubrication.
Oil Recommendations
First Tank of Fuel: POLARIS Premium Blue 2-Cycle Oil
After Break-in:
POLARIS VES 2-Cycle Oil
Tip: The Premium Blue oil will seat the rings faster than the VES oil.
See page 116 for the part numbers of POLARIS products.
Never mix brands of oil. Serious chemical reactions can cause injection
system blockage, resulting in serious engine damage. Oils may also be
incompatible and the result could be sludge formation, filter blockage,
and reduced cold weather flow rates. All POLARIS oils are compatible
with each other.
Initial Fuel Premix
Always premix fuel in 5-gallon (19-liter) increments in a separate fuel
container. Never add oil directly to the fuel tank.
Fuel
Premium Blue Oil
Ratio
Each 5 gal. (19 l)
16 oz. (473 ml)
40:1
64
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Break-In Period
Engine Break-In
Excessive heat build-up during the first three hours of operation will
damage close-fitted engine parts. Do not operate at full throttle or high
speeds for extended periods during the first three hours of use. Vary the
throttle openings and vehicle speeds to reduce friction on all close-fit-
ting machined parts, allowing them to break in slowly without damage.
NOTICE: Use of any lubricants other than those recommended by POLARIS
may cause serious engine damage. We recommend the use of
POLARIS lubricants for your vehicle.
Drive with extra caution during the break-in period. Perform regular
checks on fluid levels, lines and all other important areas of the snow-
mobile.
Oil Injection System
Always check and fill the oil bottle when refueling. See page 68.
NOTICE: Serious engine damage can occur without the proper lubrication.
Check the oil bottle level often during the first tank of fuel. If the oil
level doesn't go down, contact your dealer immediately.
Never mix brands of oil. Serious chemical reactions can cause injection
system blockage, resulting in serious engine damage. They may also be
incompatible and the result could be sludge formation, filter blockage,
and reduced cold weather flow rates. All POLARIS oils are compatible
with each other. See page 64 for oil recommendations.
Drive Belt Break-In
The break-in period for a new drive belt is 30 miles (48 km). During this
time, vary the throttle position under 50% and limit full throttle use.
New drive belts that feature a sanded finish should be first washed with
warm, soapy water and allowed to air dry prior to use.
Always take time to warm up the belt and driveline prior to operating
the snowmobile. Free the track and skis from the ground before engag-
ing throttle.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Starting the Engine
1. Turn the key to the ON position.
NOTICE: Engaging the starter when the engine is running WILL result in serious
engine damage, especially if the transmission is in reverse. Never
engage the starter when the engine is running.
2. Pull the engine stop switch up to the RUN position.
3. Turn the key to START to crank the engine. Release the key to the
ON position when the engine starts. If using the starter rope, grasp
the starter handle and pull slowly until the recoil engages; then pull
abruptly to crank the engine.
TIP:Don't pull the starter rope to the fully extended position and don't allow it to
snap back into the housing. Damage may result.
4. If the engine does not start after several attempts, slightly depress
the throttle no more than 1/4 inch (6 mm) open while cranking the
engine. When the engine starts, immediately release the throttle.
CAUTION! To avoid injury and/or engine damage, do not operate the electric
starter or pull-rope starter while the engine is running.
NOTICE: Operating the vehicle immediately after cold starting could cause
engine damage. Allow the engine to warm up for several minutes
before operating the vehicle. If cold drive-away is attempted, the
engine RPM may stumble slightly to protect the engine.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Restarting an Engine
If the rider stops the engine by pushing the engine stop switch down,
restart the engine using the normal starting procedure. If the engine fails
to start using the normal procedure:
1. Push the engine stop switch down to the OFF position.
2. Turn the key to the OFF position.
3. With both switches OFF, squeeze and hold the throttle in the wide
open position.
4. Crank the engine several times to clear the engine.
5. Release the throttle.
6. Restart the engine using the normal starting procedure.
Stopping the Snowmobile
The following chart lists methods for stopping the snowmobile. See
page 70 for more information about the engine stop switch.
THROTTLE
CONDITION
SYSTEM
Ignition Switch
WHAT IT DOES
Interrupts ignition circuit
Slows jackshaft
All
All
All
Brake
Engine Stop Switch
Interrupts ignition circuit
67
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Oil
Low Oil Indicator Light
The low oil indicator light may flicker at times due to oil movement in
the bottle, but when the light comes on and remains on, add the recom-
mended oil before further operation.
Visually check the oil level in the bottle. The engine may be operated as
long as oil is visible in the oil tank. If oil is not visible, continued opera-
tion may cause serious engine damage.
Low Oil Level
Maintaining the proper oil level will prevent system aeration and possi-
ble loss of pumping action, which could result in engine damage. This is
especially important when the machine is operated in mountainous ter-
rain.
Always check the oil level when refueling. When the oil reaches the low
level mark, add one quart (.9 liters) of recommended oil to the tank. See
page 64 for oil recommendations.
NOTICE: Operating the snowmobile without adequate engine lubrication can
result in serious engine damage. Always check the oil level when refu-
eling. Add oil as needed.
The POLARIS oil cap on the oil bottle is vented to allow proper oil
flow. See your POLARIS dealer for recommended replacement parts.
Always maintain the oil level between
the “add” mark and the bottle neck.
Do not fill the bottle neck. See page
64 for oil recommendations.
“Add”
Mark
1. Immediately stop the engine if the
low oil indicator light comes on.
2. Open the left side panel.
3. View the oil level in the oil bottle.
4. Add oil as needed before operating.
NOTICE: Operating the snowmobile without adequate engine lubrication can
result in serious engine damage. Always check the oil level when refu-
eling. Add oil as needed.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Track Warm-Up
WARNING
A loose track or flying debris could cause serious injury or death. Stand clear of
the front of the snowmobile and the moving track. Never hold the snowmobile up
or stand behind it while warming up the track. Do not use excessive throttle dur-
ing warm-up or when the track is free-hanging. Be sure the rear support is sta-
ble.
WARNING
Use of traction products such as studs, ice growsers, etc. will increase the possi-
bility of track damage and/or failure. This could cause loss of control, resulting in
serious injury or death. Always inspect for track damage before operating the
snowmobile.
Follow these steps to ensure proper warm-up of the engine, drive train
and track.
1. Use an appropriate stand to securely support the rear of the snow-
mobile at the rear bumper. The track should be approximately 4" (10
cm) off the ground.
2. Start the engine and allow it to warm up two to three minutes.
3. Depress the throttle abruptly and allow the track to rotate several
revolutions.
Tip: It will take longer to warm up the track sufficiently during colder outdoor
temperatures.
4. Release the throttle, apply the brakes, shut off the engine and lower
the snowmobile to the ground.
5. Grasp the skis by their front loops and move them from side to side
to loosen snow and ice.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Engine Stop Switch
Stop Switch
Push down on the engine stop switch to
ground out the ignition and stop the
engine quickly. Pull the switch up to the
RUN position to allow restarting.
Throttle Safety Switch
The throttle safety switch is designed to stop the engine whenever all
pressure is removed from the throttle lever and the throttle cable or
valves do not return to the normal closed position. Test the throttle
safety switch system daily before operation.
WARNING! Operating the snowmobile with a faulty throttle safety switch can
result in serious injury or death in the event of an accident. If the throttle safety
switch does not shut off the engine during a carburetor/throttle system
malfunction, immediately push down the engine stop switch. Do not start the
engine again until the malfunction has been corrected by your dealer.
Test the throttle safety switch
system daily before operation.
1. Sit on the seat.
2. Start the engine and allow it
to idle.
3. Hold the throttle lever pin
stationary by exerting pres-
sure on the pivot pin in the direction shown in the illustration.
4. Apply a slight amount of throttle. A properly functioning switch
must shut down the engine.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Throttle Lever
WARNING! An improperly functioning throttle lever may cause erratic machine
behavior and loss of control, which could result in serious injury or death. If the
throttle lever does not work properly, DO NOT start the engine.
If the engine speed limits at 2400 RPM when the throttle lever is
released:
1. Turn the ignition switch to OFF.
2. Visually inspect the throttle cable and throttle body to determine
what caused the safety switch to activate.
3. Test the throttle lever by compressing and releasing it several times.
The lever and cable must return to the idle position quickly and
completely.
4. If the throttle lever operates properly, turn the ignition switch on and
go through normal starting procedures.
5. If the engine doesn't start, take the snowmobile to an authorized
POLARIS dealer for service.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Electronic Reverse (PERCTM)
WARNING
Improper reverse operation, even at low speeds, may cause loss of control,
resulting in serious injury or death. Damage will occur to the gearcase or trans-
mission if shifting is attempted when the engine is operating above idle speed.
• Shift to or from reverse only when the snowmobile is stopped and when
engine speed is at idle.
• Look behind the vehicle before and while backing.
• Avoid sharp turns.
• Apply throttle slowly.
Engaging Reverse
Tip: Electronic reverse will activate only if the engine RPM is below 4000.
1. Stop the snowmobile and leave the engine idling.
2. Make sure the area behind your vehicle is clear.
3. Push the yellow reverse button on the left-hand control for one sec-
ond, then release. The engine will automatically reduce RPM and
start a reverse rotation. A flashing reverse light on the instrument
panel will indicate that the transmission is in reverse.
4. Apply the throttle slowly to make sure the transmission is in
reverse.The maximum engine RPM will be 6000 when in reverse.
Tip: If the engine stops running, the snowmobile will be in forward gear when it's
restarted.
Disengaging Reverse
1. Stop the snowmobile and leave the engine idling.
NOTICE: Engaging the starter when the engine is running WILL result in serious
engine damage, especially if the transmission is in reverse. Never
engage the starter when the engine is running.
2. Push the yellow reverse button for one second and release. The
engine will slow and begin to rotate forward. The light on the instru-
ment panel will shut off.
3. Apply the throttle slowly to make sure the transmission is in for-
ward.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Daily Storage
At the end of each ride, park the snowmobile on a level surface and sup-
port it at the rear with an appropriate track stand. The track should be
suspended approximately 4" (10 cm) off the ground.
Remove the key and cover the snowmobile.
Towing
For your safety, do not attempt to use a tow hitch until you've read the
following warnings and understand the proper hitch functions.
WARNING! Objects towed with a rope have no braking power and can easily
collide with the rear of the snowmobile or other objects, resulting in serious
injury or death. DO NOT tow toboggans, sleds, saucers, or any type of vehicle
with a rope. Only a stiff metal pole connecting the towed object and the tow hitch
on the snowmobile should be used. If passengers are to be towed on a
toboggan or sled, make sure the pole is at least four feet (1.2 meters) long to
prevent any possibility of contact between the snowmobile's track and a person
riding in the towed object. Braking distances increase when towing loads. Slow
down to maintain control of the snowmobile.
Whenever towing or operating with a heavy load, place the transmission
in low gear. Towing in high gear can result in belt damage. When oper-
ating in low gear, vehicle speed will be limited to protect the drive train.
If the snowmobile becomes
Shifter
inoperable and must be towed,
and if it isn't possible to use a
rigid tow bar, attach the tow rope
to the ski spindles (not to the ski
loops) to prevent damage to the
steering components. Place the
transmission in neutral, and have
someone ride on the towed
snowmobile to operate the brake
and steering when necessary.
NOTICE: Towing a disabled snowmobile with the transmission in gear can result
in serious damage to the engine and drive system. Always place the
transmission of the disabled snowmobile in neutral before towing.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Emission Control Information
Any qualified repair shop or qualified person may maintain, replace, or
repair the emission control devices or systems on your snowmobile.
Emission Control Label
Your snowmobile is equipped at the time of sale with an emission
control information (ECI) label and a factory-installed emissions
information hangtag. These items are required by U.S. Environmental
Protection Agency regulations. The ECI label is permanently affixed to
either the right side of the tunnel or the engine recoil cover. The ECI
label should not be removed, even after you purchase the snowmobile.
You may remove the factory-installed emissions information hangtag,
which is intended solely for your use in making a purchasing decision.
Emission Control Maintenance Requirements
Your snowmobile is certified to operate on gasoline with a minimum
octane level of 87 (R+M)/2. If your snowmobile is equipped with a
check engine light and it comes on, you must take your snowmobile to a
qualified dealer for diagnostic service. Specifications and adjustments
for engine tune-ups are located in the Service Manual, which is avail-
able to your qualified service technician. Reverse (if equipped) must not
be engaged during engine tune-ups.
Owner's Responsibilities
Please read the Snowmobile Engine Emissions Limited Warranty, and
read the maintenance section of your owner's manual. You are responsi-
ble for ensuring that the specified maintenance is performed. POLARIS
recommends that you contact an authorized POLARIS dealer to perform
any service that may be necessary.
Non-ionizing Radiation
This vehicle emits some electromagnetic energy. People with active or
non-active implantable medical devices (such as heart monitoring or
controlling devices) should review the limitations of their device and the
applicable electromagnetic standards and directives that apply to this
vehicle.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
POLARIS Recommended Maintenance Program
To ensure many trouble-free miles of snowmobiling enjoyment, follow
recommended regular maintenance and perform service checks as out-
lined in this manual. Record maintenance and service in the Mainte-
nance Log beginning on page 131.
The recommended maintenance schedule on your snowmobile calls for
service and maintenance inspections at 150 miles (240 km), 500 miles
(800 km) and 1000 miles (1600 km). These inspections should be per-
formed by a qualified service technician. For continued optimum perfor-
mance and component life, continue maintenance checks at 1000 mile
(1600 km) intervals.
All necessary replacement parts and labor incurred, with the exception
of authorized warranty repairs, become the responsibility of the regis-
tered owner. If, during the course of the warranty period, part failures
occur as a result of owner neglect in performing recommended regular
maintenance, the cost of repairs are the responsibility of the owner.
Personal safety is critical when attempting to service or make adjust-
ments to your snowmobile. If you're not familiar with safe service or
adjustment procedures and the use of tools, or if you don't feel comfort-
able performing these tasks yourself, contact an authorized POLARIS
dealer for service.
NOTICE: Hot components can cause damage to plastic. Always make sure the
exhaust system and engine have cooled before tipping the
snowmobile on its side for service or inspection.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Periodic Maintenance Interval Table
The following chart is a guide based on average riding conditions. You
may need to increase frequency based on riding conditions. When
inspection reveals the need for replacement parts, always use genuine
POLARIS parts, available from your POLARIS dealer.
Item
See
Page
Frequency
150 mi.
500 mi.
1000 mi.
2000 mi.
Pre-
(240 km) (800 km) (1600 km) (3200 km)
Season
CLUTCH
Clutch Alignment Offset
(without belt)
95
I
I
I
Clutches
95
96
--
I
I
C
I
I
C
I
I
Drive Belt
C
Belt Tension
Clutch Sheaves
I
I
I
97
I
I
I
ENGINE/COOLING
Engine Mounts
Recoil Rope
--
--
I
I
I
I
I
I
I
I
I
Cylinder Head Bolts
Cylinder Base Nuts
Ignition Timing BTDC
VES System
--
I
I
--
I
I
I
I
I
--
I
I
--
C
I
C
I
C
R
I
I
I
I
Coolant Level
86
--
Coolant Hose
I
I
Coolant Circulation
Coolant Leaks
Spark Plugs
--
I
I
I
--
I
I
I
I
I
I
I
82
85
85
I
I
I
R
I
Exhaust Pipe
Exhaust Retaining
Springs
I
I
I
I - Inspect (clean, adjust, tighten, lubricate, replace if necessary)
C - Clean
R - Replace
L - Lubricate
76
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Periodic Maintenance Interval Table
Item
See
Page
Frequency
150 mi.
500 mi.
1000 mi.
2000 mi.
Pre-
(240 km) (800 km) (1600 km) (3200 km)
Season
BRAKES
Hose Routing
Hose Condition
Fluid Leaks
--
--
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
--
Brake Pads
89
Brake Disc
--
Parking Brakes
Brake System
Brake Fluid
58
57, 89
57
I
FUEL MANAGEMENT
I
Idle RPM
--
I
I
I
I
I
I
Throttle Lever
55, 71
--
I
I
I
I
I
Oil Pump Lever
(synchronize)
Throttle Cable
Throttle Position Sensor
Fuel Lines
80
--
L
I
L
I
L
I
84
84
85
--
I
I
I
I
I
Fuel Filter
EVERY 2000 (3200) or EVERY 2 YEARS
Oil Filter
R
I
R
I
Oil Lines
I
I
Air Box
--
I
I
I
ELECTRICAL
Auxiliary Shut-Off
Switch
61
I
I
I
I
I
Throttle Safety Switch
Ignition Switch
Taillight
70
--
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
61
61
61
Brakelight
Headlight
77
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Periodic Maintenance Interval Table
Item
See
Page
Frequency
150 mi.
500 mi.
1000 mi.
2000 mi.
Pre-
(240 km) (800 km) (1600 km) (3200 km)
Season
CHASSIS
Ski Toe Alignment
--
--
I
I
I
I
I
I
Suspension Mounting
Bolts
I
I
Steering Fasteners
--
--
I
I
I
I
I
I
I
I
C
I
Rear Suspension
Fasteners
Drive Shaft Bearing
Skags (Wear Bars)
Ski Saddle/Spindle Bolts
Hood Straps
80
107
--
L
I
L
I
L
I
I
I
I
I
I
I
I
I
I
I
I
I
56
I
I
I
Rear Wheel Idler Bolts
and Nuts
103
I
I
I
Camber Alignment
Handlebar Centering
Track Alignment
Track Tension
--
--
I
I
I
I
I
I
I
I
I
104
102
--
I
I
I
I
I
I
I
I
I
I
I
I
Front Limiter Strap
Rail Slide Condition
Gearcase Oil
102
79
I
R
I
R
I - Inspect (clean, adjust, tighten, lubricate, replace if necessary)
C - Clean
R - Replace
L - Lubricate
78
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Lubrication
Gearcase Oil Level
Check the gearcase oil level at the
intervals outlined in the maintenance
charts beginning on page 75.
1
Change the gearcase oil after the
first 500 miles (800 km), then every
1000 miles (1600 km) or seasonally.
To check the oil level, place the
snowmobile on a level surface. The
oil level should be between the
“safe” marks on the dipstick (1). Do
not overfill.
POLARIS recommends the use of
POLARIS Synthetic Chaincase
Lube. See page 116 for the part
numbers of POLARIS products.
2
Clean the magnetic plug (2) every
500 miles (800 km) and whenever changing lubricant.
NOTICE: Mixing brands or using non-recommended lubricants could result in
excessive wear to chain, sprockets and bearings. Always use
POLARIS-recommended products for your vehicle.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Lubrication
Throttle Cable
Lubricate the throttle cable
lightly with grease or oil. With
the engine off, turn the han-
dlebars to the left and lubri-
cate liberally as shown.
Front Suspension
The front suspension and steering components do not require lubrica-
tion.
Coupler Lubrication
Using a needle-point grease
gun, grease the driveshaft cou-
pler only. The jackshaft on this
model is a one-piece jackshaft
x
that requires no lubrication.
Driveshaft
80
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Lubrication
Rear Suspension
Lubricate the suspension pivot shafts with POLARIS All Season Grease
at the intervals outlined in the Periodic Maintenance Table beginning on
page 76 and before seasonal storage. When operating in heavy, wet
snow conditions, lubricate every 500 miles (800 km).
Lack of lubrication will adversely affect your ride and the life of the sus-
pension. For more information about suspension lubrication and adjust-
ments, see your POLARIS dealer.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Spark Plugs
A new engine can cause temporary spark plug fouling due to the preser-
vative added during the assembly process. Avoid prolonged idle speeds,
which cause plug fouling and carbonization.
NOTICE: Using non-recommended spark plugs can result in serious engine
damage. A spark plug with a heat range too high will always cause
engine damage if the engine is operated in conditions more severe
than intended for that plug. Always use the spark plugs recommended
for your snowmobile.
• Use recommended spark plugs with the proper gap. Refer to the spec-
ifications section beginning on page 114.
• Use only resistor-type spark plugs.
• Torque spark plugs to 18-20 ft. lbs. (24-27 Nm).
Check the spark plug firing end condition after the engine has been
warmed up and the vehicle has been driven at higher speeds. If a plug is
fouled, replace the plug with a new plug.
CAUTION! A hot exhaust system and engine can cause burns. Wear
protective gloves when removing a spark plug for inspection.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Spark Plugs
Normal Spark Plug
The normal insulator tip is gray, tan or light brown. There will be few
combustion deposits. The electrodes are not burned or eroded. This indi-
cates the proper type and heat range for the engine and the service.
Tip: The tip should not be white. A white insulator tip indicates overheating,
caused by use of an improper spark plug or incorrect throttle body adjust-
ments.
Wet Fouled Spark Plug
The wet fouled insulator tip is black. A damp oil film covers the firing
end. There may be a carbon layer over the entire nose. Generally, the
electrodes are not worn. General causes of fouling are excessive oil or
rich fuel mixture.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Intake Filters
The intake foam filters limit snow
ingestion into the intake system. When
operating in loose powder snow, check
the foam filters periodically to remove
any accumulation of snow.
NOTICE: Operating the snowmobile with
the intake filters removed may
cause intake icing. The result will
be poor fuel economy or intake
malfunction. Always reinstall the
intake filters before operating the
snowmobile.
Intake Filter
Fuel Pump
All fuel pump service must be performed by an authorized POLARIS
dealer. Do not attempt to service the fuel pump.
Fuel Filter/Fuel Lines
See your POLARIS dealer for replacement of the fuel filter at the inter-
vals outlined in the Periodic Maintenance Table beginning on page 76.
Contaminated or poor quality fuel will shorten the life of the fuel filter
and result in poor engine performance. Always store fuel in clean fuel
containers. If low fuel pressure or reduced engine performance occurs
between the recommended fuel filter service intervals, the filter may
need replacement. See your dealer.
Inspect the fuel lines regularly for signs of deterioration or damage.
Always check fuel line condition after periods of storage. Normal dete-
rioration from weather and fuel compounds may occur. Replace worn or
damaged fuel lines promptly.
NOTICE: Kinking the fuel lines or using a pliers or similar tools to remove fuel
lines may cause damage to the lines. If a fuel line has been damaged
or kinked, replace it promptly.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Oil Lines
Inspect oil line condition every 1000 miles (1600 km).
Oil Filter
The oil filter is located at the side of the
oil tank. Have your dealer change the oil
filter and bleed the system annually or
every 1000 miles (1600 km). Have your
dealer inspect the return check valve as
well.
Tip: The direction of the arrows indicates the
direction of flow through the filter.
Exhaust System
Check the exhaust system for wear or damage at the intervals outlined in
the Periodic Maintenance Table beginning on page 76.
CAUTION! Hot exhaust system parts can cause burns. Allow adequate time for
the exhaust system to cool. Never perform this procedure with the engine
running.
1. Allow the engine and exhaust system to cool completely.
2. Open the hood.
3. Inspect the muffler and pipes for cracks or damage. Check for weak
or missing retaining springs or damper/support grommets.
4. Replace any damaged or missing components.
5. Clean the plastic surfaces next to the muffler with aerosol Carbure-
tor and Throttle Body Cleaner. See page 116 for the part numbers of
POLARIS products.
6. Close the hood.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Cooling System
Coolant
The coolant supplied in the system is a 60/40 mixture of ethylene-glycol
and distilled water. This mixture provides protection against freezing.
Contact your dealer if greater protection is required.
Use POLARIS Antifreeze 60/40 Premix. POLARIS Antifreeze is
already premixed and ready to use. Do not dilute with water. Never
exceed a 60% antifreeze/40% water mixture. See page 116 for the part
numbers of POLARIS products.
Tip: Never add tap water to the cooling system. Minerals cause deposits and
may react adversely with the metals in the engine and cooling system.
Use of a non-standard pressure cap will not allow the recovery system to
function properly. If the pressure cap needs replacement, contact your
dealer for the correct part.
CAUTION! Steam and hot liquids will cause burns to your skin. Never remove
the pressure cap when the engine is warm or hot.
Coolant Level
The engine coolant level is controlled by the recovery system. The
recovery system components are:
• Coolant recovery bottle
• Coolant reservoir
• Pressure cap
• Connecting hoses
Always maintain the coolant level at the “COLD FILL” mark on the
coolant recovery bottle (when the engine is cold).
NOTICE: Operating the snowmobile with insufficient coolant will result in
overheating and serious engine damage. Always maintain the coolant
level as recommended.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Cooling System
Coolant High Temperature Indicator Light
The high temperature indicator light will illuminate when engine cool-
ant temperature becomes too hot for safe continued operation of the
engine. If you must drive your machine after the high temperature indi-
cator light has come on, drive slowly and stop frequently to allow the
engine to cool down. Driving in deep snow will also help cool the
engine. See your dealer for service.
Add coolant if the level is low. Engine performance will be reduced if
you continue operating when the high temperature light is on.
Flushing the Cooling System
To ensure that the coolant maintains its ability to protect the engine, the
system should be completely drained every two years and a fresh mix-
ture of antifreeze and distilled water should be added. Have your
POLARIS dealer perform this service.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Cooling System
Bleeding the Cooling System
CAUTION! Steam and hot liquids will cause burns to your skin. Never bleed the
cooling system or remove the pressure cap when the engine is warm or hot.
Use of a non-standard pressure cap will not allow the recovery system to
function properly. If the pressure cap needs replacement, contact your
dealer for the correct part.
NOTICE: If coolant flow becomes restricted or plugged, coolant loss, air lock or
engine damage may result. Most cooling systems are equipped with a
filter that should be periodically inspected or replaced.
Perform the bleeding procedure when the engine is cold.
1. Position the vehicle so that the top of the tunnel is level. Elevate the
front of the vehicle slightly if necessary.
2. Place the transmission in neutral.
3. Remove the pressure cap and fill the coolant bottle with properly
mixed coolant to the maximum mark.
4. Remove the bleed screw from the water outlet manifold and/or the
thermostat housing. Allow the coolant to bleed through the system
until it runs out the bleed holes. Reinstall the bleed screw into the
manifold.
5. Add coolant to the coolant bottle to the maximum mark.
6. Start the engine and run at a fast idle for two to three minutes.
Loosen the bleed screw occasionally to purge any trapped air.
7. Stop the engine and check the coolant bottle level. Fill as required.
8. Feel the heat exchangers under the tunnel. If the system is bled
properly, they'll be warm to the touch. If they're not, repeat step 6.
Lift the front of the machine slightly to assist in the bleeding.
9. Replace the pressure cap and carefully lower the front end of the
machine.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Brakes
Hydraulic Brake Inspection
Inspect the brake lever reserve before each use of the snowmobile. See
page 57.
Brake pads must be replaced when the brake pad material becomes thin-
ner than the backing plate, approximately 1/16" (1.5 mm). A kit is avail-
able for replacing brake pads. See your dealer.
WARNING! Brake failure during operation can result in serious injury or death.
Be sure the brake pads do not drag on the disc and that brake lever travel is not
excessive. Always replace brake pads when the brake pad material becomes
thinner than the backing plate, approximately 1/16" (1.5mm).
Brake Components
• Brake Caliper
• Gearcase
Backing
Plate
Gearcase
Brake Disc
• Brake Disc
• Backing Plate
• Brake Pad Material -
Replace when thickness
is less than 1/16" (1.5
mm).
Brake Pad
Material
Brake
Caliper
89
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Brakes
Brake Fluid
WARNING
After opening a bottle of brake fluid, always discard any unused portion. Never
store or use a partial bottle. Brake fluid is hygroscopic, meaning it rapidly
absorbs moisture from the air. The moisture causes the boiling temperature of
the brake fluid to drop, which can lead to early brake fade and the possibility of
accident or serious injury.
Keep the master cylinder cover free of dirt and debris. The vent slits allow for
diaphragm movement, and if they become plugged, movement of brake fluid
below the diaphragm may be restricted, altering brake function.
NOTICE: Brake fluid will damage decals, paint and some plastics. Always wipe
up spills immediately.
Check the brake fluid in the mas-
ter cylinder before each ride.
Sight
Glass
Master
Cylinder
View the brake fluid level through
the sight glass on the top of the
master cylinder. The eye will
appear dark when the fluid level is
full. If the sight glass is any color
other than black, add brake fluid.
1. Position the handlebars so the
master cylinder is level.
2. Remove the master cylinder
cover.
3. Add DOT 4 brake fluid only. Do not overfill. See page 116 for the
part numbers of POLARIS products.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Brakes
Bleeding the Hydraulic Brake System
Air in the hydraulic brake system will cause spongy brake lever action.
Bleed the system before operating the snowmobile.
WARNING! Operating the vehicle with a spongy brake lever can result in loss of
brakes, which could cause an accident and lead to serious injury or death.
Never operate the vehicle with a spongy-feeling brake lever.
During the bleeding procedure, keep the brake handle as level as possi-
ble. The reservoir must be in this position to minimize the possibility of
air entering the system through the reservoir vent.
1. Remove brake master cylinder reservoir cover and gasket.
2. Fill the master cylinder reservoir to between the MIN and MAX
marks or 1/4"-5/16" (.6-.8 cm) below the lip of the reservoir open-
ing. Reinstall the gasket and cover.
3. Slip a rubber tube over the ball of the bleeder valve and direct the
flow of fluid into an approved container.
4. Squeeze the brake lever a full stroke. Then unscrew the bleeder
valve 3/4 of a turn to release air.
5. Close the bleeder valve and release the brake lever.
6. Repeat steps 4 and 5 until fluid flows from the bleeder valve in a
solid stream free of air bubbles.
WARNING! Overfilling the master cylinder leaves no room for fluid expansion
and may cause the brakes to lock, resulting in serious injury or death. Always
add brake fluid to the fill line as recommended.
7. After bleeding is complete, refill the reservoir to the proper level.
See page 57.
8. Reinstall the gasket and cover.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Lights
Removing Halogen Bulbs
Tip: Do not touch a halogen bulb with bare fingers. Oil from skin leaves a resi-
due, causing a hot spot that will shorten the life of the lamp. If fingers do
touch the bulb, clean it with an alcohol-moistened towel.
1. Remove the plenum cov-
ering from the headlight
assembly. Lift the rubber
boot to expose the bulb.
Bulb
Spring
2. Push down on the spring
to release it from the
housing.
Harness
3. With the wire harness
attached to the bulb,
withdraw the bulb from
the housing.
4. Grasp the bulb by its
metal base and carefully
separate the bulb from
the harness.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Lights
Installing Halogen Bulbs
1. Hold the bulb by its metal base and install it into the wire harness.
2. Insert the bulb into the housing.
3. Connect the spring to the housing.
4. Carefully flip the spring back into the housing, placing it around the
wire harness.
5. Reinstall the plenum covering on the headlight assembly.
6. Adjust headlight aim. See page 30.
Replacing Taillight Bulbs
1. Remove the screws securing the taillight cover and remove the
cover.
2. Remove the taillight lens.
3. Push the bulb in and twist it counterclockwise to remove it.
4. Install the new bulb.
5. Reinstall the taillight lens.
6. Reinstall the taillight cover.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Electrical System
RELAY LABEL
FUSE LABEL
ITEM POWERED
START SOLENOID
RELAY
Ground side of start solenoid
SPARE 20A
None
ACCESSORY
EMERGENCY
SPARE 30A
Accessory plugs
CHASSIS
RELAY
High beams
Low beams
Handwarmers
CHASSIS
30A
Thumbwarmer
Passenger handwarmers
Work light
Tail lamp
Brake lamp
Alternator coils
Exhaust sensor
Gauge
EX. SENSOR
GAUGE 20A
Accessory projector beam relay
Diagnostic plug
Ignition relay power
Cam phase sensor
ECU hold-on power
Forward limit switch
Start relay coil
IGNITION 20A
EFI
RELAY
Chassis relay coil
Ignition relay coil
Fuel pump relay coil
Fan relay coil
EFI
20A
Fuel pump relay power
PTO injector
MAG injector
IGNITION RELAY
PTO ignition coil
MAG ignition coil
Fuel pump
FUEL PUMP RELAY
FAN RELAY
Radiator fan
94
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Clutch System
Periodically inspect clutch sheaves for damage, wear or belt residue. To
maintain optimum performance, clean with non-oil based cleaners such
as isopropyl alcohol.
WARNING! If you become aware of higher than normal clutch engagement or
an unusual vibration or shift pattern, see your dealer immediately. Do not
operate the snowmobile until repairs have been made.
WARNING! All clutch maintenance and repairs must be performed by an
authorized POLARIS dealer. Any unauthorized modifications to clutches, such
as adding or removing weights, will void the warranty.
NOTICE: The bushings in the weights and rollers of POLARIS clutches are
made of a material that may be damaged if lubricated. Do not
lubricate clutch bushings.
Clutch Alignment Offset
Clutch alignment offset is important for maintaining optimum perfor-
mance. Please see your POLARIS dealer if you experience a decrease in
performance.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Clutch System
Drive Belt Condition
Periodically check the condition and tension of the drive belt, and
always carry a spare. Inspect the belt for signs of excessive wear: frayed
edges, missing cogs, cracks and excessive looseness. Replace the belt if
any of these conditions exist. See Drive Belt Troubleshooting on page
121.
For improved drive-away during extremely cold temperatures, remove
the belt and warm it to room temperature. Reinstall it before starting the
snowmobile.
Drive Belt Deflection
Straight
Edge
Measure
A
Measure belt deflection with both
clutches at rest and in their full
neutral position.
Place a straight edge on the belt
and apply downward pressure
while measuring at point A. This
measurement should be 1 1/4”
(3.2 cm).
96
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Clutch System
Drive Belt Adjustment
1. Install the L-wrench into the open threaded hole in the outer sheave
of the clutch (see page 98). Turn the wrench clockwise slightly to
remove pressure from the sheaves.
2. Loosen the 7/16-inch jam nut.
3. Using a 1/8-inch Allen wrench, aturn the set screw inward (clock-
wise) to increase the distance between the sheaves or outward
(counterclockwise) to decrease the distance.
4. Tighten the jam nut. Remove the L-wrench and store it in the tool
kit.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Clutch System
Drive Belt Removal
NOTICE: Do not attempt to remove the drive belt after operating in reverse. The
snowmobile must be stopped after forward motion to prevent damage
to components during belt removal. Rotate the driven clutch
counterclockwise 1/4 turn by hand to ensure forward engagement
before attempting to remove the belt.
1. Stop the engine after operating in a forward motion.
2. Turn the ignition key off. Wait for the engine to come to a complete
stop.
3. Lock the parking brake.
4. Open the hood and remove the left side panel.
5. Rotate the driven clutch counterclockwise 1/4 turn by hand to
ensure forward engagement.
6. Locate the L-wrench in the tool kit. Install the wrench into the open
threaded hole in the outer sheave of the clutch.
7. Turn the wrench clockwise until the sheaves open far enough to
remove the belt. If the wrench does not turn readily, rotate the
driven clutch counterclockwise an additional 1/4 turn by hand and
try again.
8. Grasp the belt at the lower edge and remove it.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Clutch System
Drive Belt Installation
1. Drop the drive belt over the drive
clutch and pull back the slack.
The belt cord line should be flush
with, or slightly above, the outer
circumference of the driven
clutch sheaves. The belt will seat
itself in the driven clutch during
the break-in period. Adjust the
belt ride-out after the break-in
period by readjusting belt deflec-
tion.
2. To ensure satisfactory belt life, install belts so they operate in the
same direction of rotation by positioning the identification numbers
so that you can read them from the left side of the vehicle. If
required, separate the sheaves as outlined in the belt removal proce-
dures.
3. Rotate the L-wrench counter-clockwise to tighten the sheaves while
working the belt to the outer edge of the sheaves.
4. Remove the L-wrench and store it in the tool kit.
5. Reinstall the side panel.
6. Close and secure the hood.
7. Break in the new belt. See page 65.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Track Replacement
When replacing the track, always install a track having the lug size rec-
ommended for your model. See your POLARIS dealer.
NOTICE: Installing tracks with larger lugs on machines equipped with coolers
will result in damage to the cooler or tunnel. Always install a track
having the lug size recommended for your model.
Track Inspection
WARNING! Broken track rods can cause a rotating track to come off the
machine, which could cause serious injury or death. Never operate with a
damaged track. Never rotate a damaged track under power.
1. Using a hoist, safely lift and sup-
port the rear of the snowmobile
off the ground.
2. Rotate the track by hand to check
for damage.
3. Carefully examine the track along
the entire length of each rod.
Bend the track to check for break-
age.
4. Replace the track if any rod dam-
age is found.
Rods
100
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Track Lubrication
WARNING! Operating with insufficient lubrication between the rail slide and
track guide clips can cause track failure, loss of vehicle control and loss of
braking ability, which can result in serious injury or death. Avoid operating for
extended periods on ice and other surfaces that have little or no snow for
lubrication.
The slide rail requires adequate snow cover for sufficient lubrication.
Excessive wear indicates insufficient lubrication. A new rail slide can
cause faster heat build-up in limited lubrication, resulting in excessive
wear.
Track damage or failure caused by operation on ice or under other poor
lubrication conditions will void the track warranty.
NOTICE: High speed use on hard-packed surfaces is not recommended for
models equipped with a deep lug track. Track lug damage may occur.
Keep high speed use to a minimum, including frequent slow-speed
intervals for track cooling.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Track Tension
WARNING! Moving parts can cut and crush body parts. When performing the
checks and adjustments recommended on the following pages, stay clear of all
moving parts. Never perform track measurement or adjustments with the engine
running.
Track adjustment is critical for proper handling. Always maintain cor-
rect tension and alignment.
TRACK TENSION DATA CHART
Measurement
Suspension
Slack Measurement
Weight
Location
Widetrak IQ
3/4"-1" (19-25 mm)
10 lbs.
(4.54 kg)
16" (40 cm)
ahead of rear
idler shaft
Tip: Tension adjustments should be
made only after the track is
warmed up and limber.
1. Turn the engine off.
2. Lift the rear of the snowmo-
bile and safely support it off
the ground.
3. Place the recommended
weight or downward pressure
on the track at the specified
distance (see chart) ahead of
the center of the rear idler
wheel.
10 lbs.
(4.54 kg)
16" (40 cm)
Tip: Measure at the point where the
weight is hanging.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Track Tension
4. Check for specified slack between the wear surface of the track clip
and the plastic rail slide.
Idler Shaft
Adjusting
Bolt
Lock
Nut
Screw
If the track needs adjustment:
5. Loosen the rear idler shaft bolt.
6. Loosen the lock nuts.
7. Tighten or loosen the track adjusting screws as necessary to provide
equal adjustment on both sides of the track.
8. Repeat the measurement on the other side of the track.
Tip: Check more frequently when the snowmobile is new.
9. Start the engine and slowly rotate the track at least five revolutions.
Let the track come to a stop (do not apply brakes).
10. Check track alignment (see page 104) and adjust as necessary.
11. Tighten the lock nuts.
12. Tighten the idler shaft bolts. Torque to 35 ft. lbs. (47.5 Nm).
103
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Track Alignment
Periodically check that the track is
centered and running evenly on the
slide rails. Misalignment will cause
excessive wear to the track and slide
rail.
1. Safely support the rear of the
snowmobile with the track off the
ground.
2. Start the engine and apply a small
amount of throttle until the track
turns slowly at least five com-
plete revolutions. Stop the engine
and let the track come to a stop
(do not apply brakes).
Rails
3. Inspect track alignment by looking through the track window to
make sure the rails are evenly spaced on each side. If the track runs
to the left, loosen left locknut and tighten the left adjusting bolt. If
the track runs to the right, loosen right locknut and tighten the right
adjusting bolt.
4. After adjustments are complete, tighten locknuts and torque idler
shaft bolts to 35 ft. lbs. (47.5 Nm).
5. Repeat steps 2 and 3 to verify proper alignment.
Rail Slide Wear
For ease of inspection, all
POLARIS rail slides have a
Minimum
wear limit indicator groove to
Thickness
indicate the minimum permissi-
ble slide thickness. Replace the
rail slides if they are worn to the
top of the groove at any point
along their length.
Replace when
worn to top of
groove
NOTICE: Failure to replace worn
rail slides may result in
permanent damage to
the track or rails.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Steering System
Steering Inspection and Adjustment
Check all steering system fasteners weekly and before a long ride.
Tighten any loose fasteners.
X
X
X
X
X
105
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Steering System
Ski Alignment
WARNING! Improper ski alignment or adjustment may cause loss of steering
control, resulting in serious injury or death. Do not attempt to change the ski
alignment or camber adjustment. See your POLARIS dealer.
1. Place the handlebars in a straight-ahead position.
2. With only vehicle weight compressing the suspension, measure 10
inches (25.4 cm) forward from the center of the ski mounting bolt.
See illustration. At this point, measure between the skis. This is
measurement X.
3. Perform the same measurement rearward from the center of the ski
mounting bolt. This is measurement Y.
4. The X measurement should be 1/8-1/4 inch (3-6 mm) greater than
the Y measurement. If the skis are misaligned, see your dealer for
alignment correction as camber adjustment may also be affected.
X
10 in.
(25.4 cm)
10 in.
(25.4 cm)
Y
106
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Steering System
Ski Skags
WARNING! Worn skis and/or skags will adversely affect handling. Loss of
vehicle control may result, causing serious injury or death. See your dealer's
studding chart for recommended skags. If you install longer or more aggressive
carbide skags than the original equipment, it may also be necessary to add track
studs to maintain proper vehicle control while turning on hard-packed snow or
ice.
Check skags before each use of the snowmobile to ensure positive steer-
ing characteristics. Skags must be replaced when worn to half their orig-
inal diameter.
Tip: Carbide skags must be replaced if any abnormal wear or chipping is found.
Skag Replacement
1. Raise and support the
front of the snowmo-
bile so the skis are
approximately 6
inches (15 cm) from
the ground.
2. Remove the attaching
nuts and pry the skag
downward.
3. Remove the front end
of the skag.
4. Remove the rear end
of the skag.
5. Reverse the steps to
install a skag.
Skag
107
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Battery
WARNING! Improperly connecting or disconnecting battery cables can result in
an explosion and cause serious injury or death. When removing the battery,
always disconnect the negative (black) cable first. When reinstalling the battery,
always connect the negative (black) cable last.
Battery Removal
1. Release the seat latch and raise the seat to access the battery.
2. Disconnect the black (negative) battery cable first.
3. Disconnect the red (positive) battery cable last.
4. Remove the battery.
Battery Installation
When installing a new battery, make sure it's fully charged prior to its
initial use. Using a new battery that has not been fully charged can dam-
age the battery and result in a shorter life. It can also hinder vehicle per-
formance. Follow the battery charging instructions on page 110 before
installing the battery.
1. Ensure that the battery is fully charged.
2. Set the battery in the battery holder.
3. Connect and tighten the red (positive) cable first.
4. Connect and tighten the black (negative) cable last.
5. Verify that cables are properly routed.
6. Lower the seat and secure the latch.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Battery
Battery Storage
Whenever the vehicle is not used for a period of three months or more,
remove the battery from the vehicle, ensure that it's fully charged, and
store it out of the sun in a cool, dry place. Check battery voltage each
month during storage and recharge as needed to maintain a full charge.
Tip: Battery charge can be maintained by using a POLARIS Battery TenderTM
charger (PN 2871076) or by charging about once a month to make up for
normal self-discharge. Battery TenderTM can be left connected during the
storage period, and will automatically charge the battery if the voltage drops
below a pre-determined point.
Battery Charging
The following battery charging instructions apply only to the installa-
tion of a sealed battery. Read all instructions before proceeding with the
installation of this battery.
The sealed battery is already filled with electrolyte and has been sealed
and fully charged at the factory. Do not ever pry the sealing strip off or
add any other fluid to this battery.
The single most important thing about maintaining a sealed battery is to
keep it fully charged. Since the battery is sealed and the sealing strip
cannot be removed, you must use a voltmeter or multimeter to measure
DC voltage.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Battery
Battery Charging
For a refresh charge, follow all instructions carefully.
1. Check the battery voltage with a voltmeter or multimeter. A fully
charged battery will register 12.8 V or higher.
2. If the voltage is less than 12.8 volts, recharge the battery at 1.2 amps
or less until the battery voltage is 12.8 or greater.
Tip: When using an automatic charger, refer to the charger manufacturer's
instructions for recharging. When using a constant current charger, use the
following guidelines for recharging.
WARNING! An overheated battery may explode, causing severe injury or
death. Always watch charging times carefully. Stop charging if the battery
becomes very warm to the touch. Allow it to cool before resuming charging.
Tip: Always verify battery condition before and 1-2 hours after the end of
charging.
Charge Time
State of
Charge
(Using constant current
Voltage
Action
charger @ standard amps
specified on top of battery)
100%
12.8-13.0 volts
None, check at 3
mos. from date of
manufacture
None required
75%-100%
12.5-12.8 volts
May need slight
charge, if no
3-6 hours
charge given,
check in 3 months
50%-75%
25%-50%
12.0-12.5 volts
11.5-12.0 volts
Needs charge
Needs charge
5-11 hours
At least 13 hours,
verify state of charge
0%-25%
11.5 volts or less Needs charge with
desulfating charger
At least 20 hours
110
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Matte Clear Coat Cleaning (if equipped)
Matte finish products are prone to trapping dirt, oils and other
contaminants. POLARIS Industries recommends cleaning with warm
water and a mild dish detergent. Use a soft sponge to gently rub the
surface and rinse with clean warm water. For stubborn stains such as
grease or oil use a citrus based cleaner (3M Citrus Base Cleaner
recommended). Spray onto the area to be cleaned and rub with a soft
sponge. Allow to sit for a couple of minutes and wash away with clean
warm water. Repeat as necessary to clean the surface.
NOTICE: Never use a polishing/buffing wax or any sponge that has an abrasive
surface. These products will buff the matte surface of the finish
resulting in a glossy finish. It is not recommended that you clean matte
finishes with a pressure washer as this will further imbed
contaminants into the clear coat and possibly damage the decals.
Extended Storage
Off-season or extended storage of your snowmobile requires preventive
measures to aid against deterioration and to prolong the useful life of
many components. See page 116 for the part numbers of POLARIS
products.
Cleaning and Preservation
Proper storage starts with cleaning, washing, and waxing the hood,
chassis, and plastic parts. Wipe down remaining surfaces with a damp
cloth. Clean and touch up with paint any rusted or previously painted
surfaces. Be sure that corrosive salt and acids are removed from surfaces
before beginning preservation with waxes and rust inhibitors (grease, oil
or paint).
The snowmobile should be stored in a dry garage or shed, out of direct
sunlight, and covered with a fabric snowmobile cover. Plastic tarp may
cause condensation to form and damage snowmobile components.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Extended Storage
Battery Maintenance
Remove the battery and recharge it as outlined on page 110. Store the
battery in a cool, dry place.
Controls and Linkage
Lubricate all bushings and cables at the intervals outlined in the Periodic
Maintenance Table beginning on page 76.
Bearings
Grease the jackshaft and drive shaft clutch side bearings with POLARIS
All-Season Grease or a similar high quality grease to prevent corrosion.
Clutch and Drive System
Remove the drive belt and store in a cool dry location. Do not lubricate
clutch components, except the driven clutch shaft bushing as outlined in
the service manual. See your dealer.
Engine Protection
Proper preparation of the engine and fuel system is vital to the preven-
tion of rust and corrosion on precision engine parts during storage.
Whenever the snowmobile is stored for a period of more than 60 days,
the engine must be fogged with fogging oil. Follow the engine fogging
instructions provided on the container.
Always add Carbon Clean or a fuel conditioner/stabilizer to the fuel
tank. Follow the instructions on the container, running the engine for
five minutes to get additives through the entire fuel system. Top off with
fresh fuel. Do not allow the snowmobile to run out of fuel.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Extended Storage
Electrical Connections
Replace worn or frayed electrical wire and connectors. Be sure wiring
harness is properly secured away from sharp edges, steering linkage,
moving parts, and hot exhaust parts.
Track and Suspension
Moderate track tension should be maintained during summer storage.
The snowmobile should be supported off the ground to allow the track
to hang freely.
Transporting the Snowmobile
Whenever the snowmobile is transported:
1. Be sure the fuel cap and oil cap are installed correctly.
2. Always tie the snowmobile to the transporting unit securely using
suitable straps.
3. Remove the ignition key to prevent loss.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Capacities and Dimensions
Body Style
IQ
Rider Capacity
Coolant Capacity
Fuel Capacity
Oil Capacity
Gearcase Oil Capacity
Length
Width
Height
Brake Type
2
9.8 qts. (9.3 l)
14.3 gal. (54.1 l)
3.6 qts. (3.4 l)
20 oz. (591.5 ml)
138 in. (351 cm)
48.75 in. (124 cm)
55 in. (139.7 cm)
L/C Hydraulic
12 in. (30.5 cm)
3211132
Drive Clutch Center Distance
Drive Belt P/N
Clutch Type
P-85 Drive / P90 Driven
Electronic Reverse
Reverse Transmission
Engine and Cooling
Engine
S4772-6044-OR6N
Displacement
Cylinders
599 cc
2
Bore x Stroke (mm)
Alternator Output
Throttle Body
Throttle Body Bore Size
Idle RPM
77.25 x 64
400 watt
Mikuni
46 mm
1700 +/- 200
Cooling
Liquid
Ignition Type
Ignition Timing
Spark Plug / Gap
Fuel Octane
Digital
18° @ 1700 RPM, 120 °F (49 °C) water temp
NGK BPR9ES / .028 in. (0.70 mm)
91 Recommended, 87 Minimum
Features
Electric Fuel Gauge
Electric Start
Low Oil Light
Parking Brake
Speedometer
Standard
Standard
Standard
Standard
Standard
Standard
Tachometer
114
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Clutching Chart
ALTITUDE Drive Clutch Drive Clutch Driven Clutch
Driven
Helix
Chaincase
Gearing/
Pitch
Meters
(Feet)
Shift Weight
Spring
Spring
*Shaded cells indicate factory settings.
0-600
(0-2000)
11-64
(1322604)
Dark
Blue/White
(7041781)
140/200 P2 Tab 40/38-.45 P2N
(7043495) (5137157)
19:41
Borg/Warner
66P
600-1200
(2000-4000)
10-62
(1321586)
Dark
Blue/White
(7041781)
140/200 P2 Tab 40/38-.45 P2N
(7043495) (5137157)
19:41
Borg/Warner
66P
1200-1800
(4000-6000)
10-60
(1321587)
Dark
Blue/White
(7041781)
140/200 P2 Tab 40/38-.45 P2N
(7043495) (5137157)
19:41
Borg/Warner
66P
1800-2400
(6000-8000)
10-58
(1321588)
Dark
Blue/White
(7041781)
140/200 P2 Tab 40/38-.45 P2N
(7043495) (5137157)
19:41
Borg/Warner
66P
2400-3000
(8000-10000)
10-56
(1321684)
Dark
Blue/White
(7041781)
140/200 P2 Tab 40/38-.45 P2N
(7043495) (5137157)
19:41
Borg/Warner
66P
3000-3600
(10000-12000)
10-54
(1321685)
Dark
Blue/White
(7041781)
140/200 P2 Tab 40/38-.45 P2N
(7043495) (5137157)
19:41
Borg/Warner
66P
115
Download from Www.Somanuals.com. All Manuals Search And Download.
POLARIS PRODUCTS
Description
Engine Lubricants
Fogging Oil (12 oz. Aerosol)
Part No.
2870791
2875035
2875036
2877882
2877953
2877883
2877884
Premium Blue 2-Cycle Oil (qt./.95 l) (break-in only)
Premium Blue 2-Cycle Oil (gal./3.8 l) (break-in only)
VES 2-Cycle Oil (qt./.95 l)
VES 2-Cycle Engine Oil (2 qt./1.9 l)
VES 2-Cycle Engine Oil (gal./3.8 l)
VES 2-Cycle Engine Oil (2.5 gal./9.5 l)
Chaincase Lubricants
2873105
2873106
SCL - Synthetic Chaincase Lubricant (qt./.95 l)
SCL - Synthetic Chaincase Lubricant (gal./3.8 l)
Grease/Specialized Lubricants
Grease Gun Kit, All Season (3 oz./89 ml)
All Season Grease (3 oz./89 ml cartridge)
All Season Grease (14 oz./414 ml cartridge)
Dielectric Grease (Nyogel™)
2871312
2871322
2871423
2871329
Coolant
2871534
2871323
Polaris Antifreeze 60/40 Premix (qt./.95 l)
Polaris Antifreeze 60/40 Premix (gal./3.8 l)
Additives/Miscellaneous
2871326
2870652
2872189
2872893
2870505
2872889
2872890
Carbon Clean
Fuel Stabilizer
DOT4 Brake Fluid
Engine Degreaser
Isopropyl Fuel De-Icer
Brake and Clutch Cleaner
Carburetor and Throttle Body Cleaner
116
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Engine Troubleshooting
Unless you have experience and training in two-cycle engine repair, see
your dealer if technical problems arise.
Problem
Probable Cause Solution
Erratic engine oper- Drive clutch binding • SEE YOUR DEALER.
ating RPM during
Driven clutch
malfunction
• SEE YOUR DEALER.
• Replace the drive belt.
• SEE YOUR DEALER.
• Replace the drive belt.
acceleration or load
variations
Harsh drive clutch
engagement
Drive belt worn or
too narrow
Excessive belt/
sheave clearance
Drive belt turns over Wrong belt for
application
Clutch alignment out • SEE YOUR DEALER.
of spec
Engine mount
broken or loose
• Inspect and replace. SEE YOUR
DEALER.
Machine fails to
move
Clutch jammed
Track jammed
• Check for twisted belt or broken
spring. SEE YOUR DEALER.
• Foreign object may be caught or the
rail slide melted to the track clips
due to lack of lubrication.
• Track may be iced up or frozen to
the ground.
Chaincase sprocket
or chain jammed or
broken
• Chain is loose or broken or chain
tightener is loose. SEE YOUR
DEALER.
Transmission is in
neutral
• Place the transmission in gear.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Engine Troubleshooting
Problem
Probable Cause Solution
Noise in drive
system
Broken drive clutch • SEE YOUR DEALER.
components
Bearing failure/
gearcase, jackshaft,
or front drive shaft
• SEE YOUR DEALER.
Drive belt surface
flat spots
• Inspect and replace as needed.
Drive chain loose
• Inspect and adjust (or replace).
• SEE YOUR DEALER.
Drive chain worn,
sprocket teeth bro-
ken
Poor low RPM
performance
Worn drive belt
• Inspect and replace as needed.
• SEE YOUR DEALER.
Excessive belt/
sheave clearance
Sticky clutch
• SEE YOUR DEALER.
• Use 87-89 octane fuel.
Poor fuel quality
Seized engine
Engine doesn't turn
• SEE YOUR DEALER. Seizure is a
result of poor lubrication, inade-
quate fuel supply, broken parts or
improper cooling.
Hydrostatic lock
• Fuel may have entered the crankcase
while the vehicle was standing or
being transported. SEE YOUR
DEALER to correct the cause. Drain
plug(s) are located on the lower
crankcase for emergency draining.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Engine Troubleshooting
Problem
Probable Cause Solution
Engine turns but fails Faulty ignition
to start
• Install new spark plug(s). If engine
still fails to start, check for spark. If
there's no spark, SEE YOUR
DEALER.
No fuel to engine
• Make sure the fuel valve is on.
• Make sure the fuel tank contains
fuel.
• Ice may be in the fuel line, filter or
pump. Add isopropyl alcohol to the
fuel system.
Poor engine
compression
• This indicates a major engine
problem that must be repaired before
operating. SEE YOUR DEALER.
Engine lacks power
Fouled or defective
spark plug(s)
• Replace the plug(s).
Fuel filter (loss of
high RPM power)
• SEE YOUR DEALER.
Plugged fuel filter or • SEE YOUR DEALER.
tank pick-up sock
Incorrect clutching
Faulty plug(s)
Fuel System
• SEE YOUR DEALER.
• Change plug(s).
Engine continually
backfires
• Dirt or ice may be in the fuel system
(deicer should be added to non-
ethanol fuel at all times for
assurance against fuel line icing).
Incorrect throttle
freeplay or faulty
switch
• SEE YOUR DEALER.
Engine requires
more than normal
pulls to start
Poor fuel
• Replace with fresh winter fuel.
• SEE YOUR DEALER.
Not enough fuel
getting to engine
Plugged fuel filter or • SEE YOUR DEALER.
tank pick-up sock
119
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Suspension Troubleshooting
Problem
Solution
Rear suspension
bottoms too easily
• Set static sag (see page 48). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag
dimensions.
Rides too stiff in rear • Check for binding suspension components and grease all
pivot points.
• Set static sag (see page 48). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag
dimensions.
Too much weight
transfer when
climbing
• Set static sag (see page 48). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag.
• Move limiter strap to high position (see page 50).
Too little weight
transfer when
climbing
• Set static sag (see page 48). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag.
• Move limiter strap to low position (see page 50).
Front end pushes
• Check for worn skags.
• Check for binding front suspension shafts/steering
components, grease all pivot points (elevate front of
machine).
• Set static sag (see page 48). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag.
• Increase IFS preload (if equipped) (see page 46).
• Move limiter strap to high position (see page 50).
Steering is heavy
• Make sure spindles and all steering components turn freely.
• Check ski alignment (see page 106).
• Check skags and skis for damage.
• Set static sag (see page 48).
Machine darts from
side to side
• Check ski alignment (see page 106).
• Check for binding front suspension shafts/steering
components, grease all pivot points (elevate front of
machine).
• Check for excessive play in steering assembly (see dealer).
• Ensure skags are straight on skis.
• Set static sag (see page 48).
• Check rail slide/replace if worn (see page 104).
120
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Drive Belt Wear/Burn
Cause
Solution
Driving at low RPM
Drive at higher RPM. Gear the machine down. Check belt
deflection.
Insufficient warm-up
Warm the engine at least five minutes. Take the drive belt
off the machine in extremely cold weather and warm it up.
Break machine loose from the snow.
Towing at low RPM
Do not tow in high gear. Do not tow in deep snow. Use fast,
aggressive throttle to engage clutch.
Riding with high RPM Lower the gear ratio. Reduce RPM. Avoid riding in high
and slow speed (8000
RPM at 10 MPH/16
km/h)
ambient temperatures. Check for snow ingestion.
Ice and snow build-up
between track and
tunnel
Warm the engine at least five minutes. Take the drive belt
off the machine in extremely cold weather and warm it up.
Break machine loose from the snow.
Poor engine
performance
Check for fouled plugs or water, ice, or dirt in the gas tank
or fuel line.
Loading machines onto Skis may gouge into trailers and prevent the drivetrain from
trailers
spinning properly. Use enough speed to drive the machine
completely onto the trailer. Push and pull it to finish
loading if necessary.
Clutch malfunction
Inspect clutch components. See your dealer.
Use fast, aggressive throttle to engage clutch.
Slow, easy clutch
engagement
Wrong or missing belt
Improper break-in
Always use the recommended belt.
Always break in a new belt and/or clutch by avoiding
aggressive or high speed operation during the break-in
period.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Service And Warranty Information
Obtaining Service and Warranty Assistance
Read and understand the service data and the POLARIS warranty
information contained in this manual. Contact your POLARIS dealer for
replacement parts, service or warranty. Your dealer receives frequent
updates on changes, modifications and tips on snowmobile
maintenance, which may supersede information contained in this
manual. Your dealer is also familiar with POLARIS policies and
procedures and will be happy to assist you.
When contacting us about parts, service, or warranty, always provide the
following information:
1. Serial number
2. Model number
3. Dealer name
4. Date of purchase
5. Details of trouble experienced
6. Length of time and conditions of operation
7. Previous correspondence
Use the page provided near the front of your Owner’s Manual to record
the identification numbers of your snowmobile and its engine.
POLARIS Customer Service
United States: 1-888-704-5290
Canada: 1-204-925-7100
122
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Service And Warranty Information
POLARIS Anti-Theft System
The POLARIS anti-theft system (PATS) monitoring program is
designed to aid owners of registered snowmobiles in recovery of stolen
machines.
Administration
1. POLARIS snowmobile owner reports theft.
A. In addition to notifying the proper law enforcement officials, the owner
must call POLARIS Customer Service.
B. Owners must provide their name, address, telephone number and the
model and serial number of stolen machines.
2. POLARIS warranty will provide all dealerships with a monthly
updated list of all stolen units to further monitor thefts.
3. POLARIS warranty will aid in notifying the proper owner when a
unit is recovered
123
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Limited Warranty
POLARIS Sales Inc., 2100 Highway 55, Medina, MN 55340, provides a ONE YEAR
LIMITED WARRANTY on all components of the POLARIS snowmobile against
defects in material or workmanship. Warranty period will vary regionally. This warranty
covers the parts and labor charges for repair or replacement of defective parts that are
covered by this warranty. The warranty begins on the date of purchase. This warranty is
transferable to another consumer, during the warranty period, through a POLARIS
dealer.
Registration
At the time of sale, the Warranty Registration Form must be completed by your dealer
and submitted to POLARIS within ten days. Upon receipt of this registration, POLARIS
will record the registration for warranty. No verification of registration will be sent to
the purchaser as the copy of the Warranty Registration Form will be the warranty entitle-
ment. If you have not signed the original registration and received the customer copy,
please contact your dealer immediately. NO WARRANTY COVERAGE WILL BE
ALLOWED UNLESS THE SNOWMOBILE IS REGISTERED WITH POLARIS.
Initial dealer preparation and set-up of your snowmobile is very important in ensuring
trouble-free operation. Purchasing a snowmobile in the crate or without proper dealer
set-up will void your warranty coverage.
Warranty Coverage and Exclusions
Limitations of warranties and remedies
This warranty excludes any failures not caused by a defect in material or workmanship.
The warranty does not cover accidental damage, normal wear and tear, abuse or
improper handling. The warranty also does not cover any snowmobile that has been
structurally altered, neglected, improperly maintained, used for racing or used for pur-
poses other than for which it was manufactured. The warranty does not cover any dam-
ages that occur during trailer transit or as a result of unauthorized service or parts. In
addition, this warranty does not cover physical damage to paint or finish, stress cracks,
tearing or puncturing of upholstery material, corrosion or defects in parts, components
or the snowmobile due to fire, explosions or any other cause beyond POLARIS’ control.
This warranty does not cover the use of unauthorized lubricants, chemicals, or fuels that
are not compatible with the snowmobile.
The exclusive remedy for breach of this warranty shall be, at POLARIS’ exclusive
option, repair or replacement of any defective materials, or components or products.
THE REMEDIES SET FORTH IN THIS WARRANTY ARE THE ONLY REMEDIES
AVAILABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY. POLARIS
SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSE-
QUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARIS-
ING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT,
NEGLIGENCE, OR OTHER TORT OR OTHERWISE. THIS EXCLUSION OF CON-
SEQUENTIAL, INCIDENTAL, AND SPECIAL DAMAGES IS INDEPENDENT
FROM AND SHALL SURVIVE ANY FINDING THAT THE EXCLUSIVE REMEDY
FAILED OF ITS ESSENTIAL PURPOSE. Some states do not permit the exclusion or
limitation of incidental or consequential damages or implied warranties, so the above
limitations or exclusions may not apply to you if inconsistent with controlling state law.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Limitations of warranties and remedies
ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE) ARE LIMITED IN DURATION TO THE ABOVE ONE YEAR
WARRANTY PERIOD. POLARIS FURTHER DISCLAIMS ALL EXPRESS WAR-
RANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you if
inconsistent with controlling state law.
Promotional Warranties
Promotional warranties are sometimes offered by POLARIS. These warranties can be,
but are not limited to:
•
•
•
Two-year extended engine coverage
Two-year powertrain coverage
Extended service contract
If you selected any type of extended warranty coverage as part of a POLARIS retail pro-
gram, please contact any authorized POLARIS dealer for additional information.
How to Obtain Warranty Service
If your snowmobile requires warranty service, you must take it to a POLARIS dealer
authorized to repair POLARIS snowmobiles. When requesting warranty service you
must present your copy of the Warranty Registration form to the dealer. (The cost of
transportation to and from the dealer is YOUR responsibility). POLARIS recommends
that you use your original selling dealer; however, you may use any POLARIS Servicing
Dealer to perform warranty service.
Please work with your dealer to resolve any warranty issues. Your dealer will contact the
appropriate personnel at POLARIS if additional assistance is needed.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
If any of the above terms are void because of state or federal law, all other warranty
terms will remain in effect.
Engine Oil
1. Mixing oil brands or using non-recommended oil may cause engine damage. We rec-
ommend the use of POLARIS engine oil.
2. Damage resulting from the use of non-recommended lubricants may not be covered
by warranty.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Conditions and Exclusions
In order to qualify for warranty, the product must have been properly set up and tested
by a POLARIS Dealer (if applicable). Failure of any dealer to perform the required vehi-
cle Pre-Delivery Inspection, perform all applicable service bulletins and have the con-
sumer sign the PDI form prior to delivery may void the warranty. Failure to provide
proof of required periodic maintenance upon request may result in denial of warranty
coverage. Use of the recommended POLARIS products for lubrication and maintenance
as directed by the Owner’s manual is highly recommended. Should a failure occur dur-
ing the warranty period resulting from the use of non-recommended products, warranty
coverage may be denied.
Warranty does not apply to parts exposed to friction surfaces, stresses, environmental
conditions and/or contamination. The following items are excluded from warranty con-
sideration if the failure was due to wear or not the direct result of a defect:
Skis
Ski wear rods
Tracks
Slide rails
Suspension components
Brake components
Seat components
Clutches and components
Steering components
Batteries
Finished and unfinished surfaces
Carburetor/Throttle body components
Engine components
Drive belts
Hydraulic components
Circuit breakers/Fuses
Electronic components
Light bulbs/Sealed beam lamps
Idler wheels
Warranty applies to the product only and does not allow for coverage of personal loss.
Some items are considered “consumable,” meaning they are considered part of normal
maintenance or part of completing an effective repair. The following items are excluded
from warranty coverage in the event of a warranty claim:
Spark Plugs
Filters
Fuel
Lubricants such as oil, grease, etc.
Batteries (unless defective)
Cosmetic damage/repair
Coolants
Sealants
Hotel fees
Meals
Towing charges
Mileage
Rentals/Loss of product use
Shipping/ handling fees
Product pick-up/delivery
Loss of vacation/personal time
This warranty also excludes failures resulting from improper lubrication; improper
engine timing; improper fuel; surface imperfections caused by external stress, heat, cold
or contamination; operator error or abuse; improper component alignment, tension,
adjustment or altitude compensation; failure due to snow, water, dirt or other foreign
substance ingestion/contamination; improper maintenance; modified components; use
of aftermarket components resulting in failure; unauthorized repairs; repairs made after
the warranty period expires or by an unauthorized repair center; use of the product in
competition or for commercial purposes. Warranty will not apply to any product which
has been damaged by abuse, accident, fire or any other casualty not determined a defect
of materials or workmanship.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Exported Vehicles
EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO WAR-
RANTY OR SERVICE BULLETIN COVERAGE ON THIS VEHICLE IF IT IS SOLD
OUTSIDE THE COUNTRY OF THE SELLING DEALER’S AUTHORIZED LOCA-
TION.
This policy does not apply to vehicles that have received authorization for export from
POLARIS Industries. Dealers may not give authorization for export. You should consult
an authorized dealer to determine this vehicle’s warranty or service bulletin coverage if
you have any questions.
This policy does not apply to vehicles registered to government officials or military per-
sonnel on assignment outside the country of the selling dealer’s authorized location.
This policy does not apply to Safety Bulletins.
How to Get Service
In the Country where your vehicle was purchased:
Warranty or Service Bulletin repairs must be done by an authorized POLARIS dealer. If
you move or are traveling within the country where your vehicle was purchased, War-
ranty or Service Bulletin repairs may be requested from any authorized POLARIS dealer
who sells the same line as your vehicle.
Outside the Country where your vehicle was purchased:
If you are traveling temporarily outside the country where your vehicle was purchased,
you should take your vehicle to an authorized POLARIS dealer. You must show the
dealer photo identification from the country of the selling dealer’s authorized location as
proof of residence. Upon residence verification, the servicing dealer will be authorized
to perform the warranty repair.
If You Move:
If you move to another country, be sure to contact POLARIS Customer Assistance and
the customs department of the destination country before you move. Vehicles importa-
tion rules vary considerably from country to country. You may be required to present
documentation of your move to POLARIS Industries in order to continue your warranty
coverage. You may also be required to obtain documentation from POLARIS Industries
in order to register your vehicle in your new country. You should warranty register your
vehicle at a local POLARIS dealer in your new country immediately after you move to
continue your warranty coverage and to ensure that you receive safety information and
notices regarding your vehicle.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
How to Get Service
If Purchased From A Private Party:
If you purchase a POLARIS product from a private citizen outside of the country in
which the vehicle was originally purchased, all warranty coverage will be denied. You
must nonetheless warranty register your vehicle under your name and address with a
local POLARIS dealer in your country to ensure that you receive safety information and
notices regarding your vehicle.
Notice
If your vehicle is registered outside of the country where it was purchased, and you have
not followed the procedure set out above, your vehicle will no longer be eligible for war-
ranty or service bulletin coverage of any kind, other than safety bulletins. (Vehicles reg-
istered to Government officials or military personnel on assignment outside of the
country where the vehicle was purchased will continue to be covered by the basic war-
ranty.)
For questions call POLARIS Customer Assistance (see page 122).
128
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
U.S.A. EPA Emissions Limited Warranty
This emissions limited warranty is in addition to the POLARIS standard limited war-
ranty for your vehicle. POLARIS Industries Inc. warrants that at the time it is first pur-
chased, this emissions-certified vehicle is designed, built and equipped so it conforms
with applicable U.S. Environmental Protection Agency emission regulations. POLARIS
warrants that the vehicle is free from defects in materials and workmanship that would
cause it to fail to meet these regulations.
The warranty period for this emissions-certified vehicle starts on the date the vehicle is
first purchased and continues for a period of 200 hours of engine operation, 4000 kilo-
meters (2485 miles) of vehicle travel, or 30 calendar months from the date of purchase,
whichever comes first.
This emissions limited warranty covers components whose failure increases the vehi-
cle’s regulated emissions, and it covers components of systems whose only purpose is to
control emissions. Repairing or replacing other components not covered by this war-
ranty is the responsibility of the vehicle owner. This emissions limited warranty does not
cover components whose failure does not increase the vehicle’s regulated emissions.
For exhaust emissions, emission-related components include any engine parts related to
the following systems:
•
•
Air-induction system
Fuel system
•
•
Ignition system
Exhaust gas recirculation systems
The following parts are also considered emission-related components for exhaust emis-
sions:
•
•
Aftertreatment devices
Crankcase ventilation valves
•
•
Sensors
Electronic control units
The following parts are considered emission-related components for evaporative emis-
sions:
•
•
•
•
•
•
•
•
•
Fuel Tank
Fuel Cap
Fuel Line
Fuel Line Fittings
Clamps*
Pressure Relief Valves*
Control Valves*
Control Solenoids*
Electronic Controls*
•
•
•
•
•
•
•
•
•
Vacuum Control Diaphragms*
Control Cables*
Control Linkages*
Purge Valves
Vapor Hoses
Liquid/Vapor Separator
Carbon Canister
Canister Mounting Brackets
Carburetor Purge Port Connector
*As related to the evaporative emission control system.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
U.S.A. EPA Emissions Limited Warranty
The exclusive remedy for breach of this limited warranty shall be, at the exclusive
option of POLARIS, repair or replacement of any defective materials, components or
products. THE REMEDIES SET FORTH IN THIS LIMITED WARRANTY ARE THE
ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WAR-
RANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCI-
DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY
DESCRIPTION,WHETHER ARISING OUT OF EXPRESS OR IMPLIED WAR-
RANTY OR ANY OTHER CONTRACT, NEGLIGENCE OR OTHER TORT OR
OTHERWISE. THIS EXCLUSION OF CONSEQUENTIAL, INCIDENTAL, AND
SPECIAL DAMAGES IS INDEPENDENT FROM AND SHALL SURVIVE ANY
FINDING THAT THE EXCLUSIVE REMEDY FAILED OF ITS ESSENTIAL PUR-
POSE.
ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE) ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD DESCRIBED HEREIN. POLARIS DISCLAIMS ALL EXPRESS WARRAN-
TIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations on
how long an implied warranty lasts, so the above limitation may not apply if it is incon-
sistent with the controlling state law.
This limited warranty excludes failures not caused by a defect in material or workman-
ship.This limited warranty does not cover damage due to accidents, abuse or improper
handling, maintenance or use. This limited warranty also does not cover any engine that
has been structurally altered, or when the vehicle has been used in racing competition.
This limited warranty also does not cover physical damage, corrosion or defects caused
by fire, explosions or other similar causes beyond the control of POLARIS.
Owners are responsible for performing the scheduled maintenance identified in the
owner's manual. POLARIS may deny warranty claims for failures that have been caused
by the owner’s or operator’s improper maintenance or use, by accidents for which
POLARIS has no responsibility, or by acts of God.
Any qualified repair shop or person may maintain, replace, or repair the emission con-
trol devices or systems on your vehicle. POLARIS recommends that you contact an
authorized POLARIS dealer to perform any service that may be necessary for your vehi-
cle. POLARIS also recommends that you use only Pure POLARIS parts. It is a potential
violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer
reduces the effectiveness of the vehicle's emission controls. Tampering with emission
controls is prohibited by federal law.
If you have any questions regarding your warranty rights and responsibilities, please
contact the POLARIS Warranty Department at 1-888-704-5290.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE LOG
Present this section of your manual to your dealer each time your snow-
mobile is serviced. This will provide you and future owners with an
accurate log of maintenance and services performed on the snowmobile.
DATE
MILES
(KM)
TECHNICIAN
SERVICE PERFORMED / COMMENTS
150 mi.
(240 km)
500 mi.
(800 km)
1000 mi.
(1600 km)
1500 mi.
(2400 km)
131
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE LOG
DATE
MILES
(KM)
TECHNICIAN
SERVICE PERFORMED / COMMENTS
132
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE LOG
DATE
MILES
(KM)
TECHNICIAN
SERVICE PERFORMED / COMMENTS
133
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
A
D
Accessories . . . . . . . . . . . . . . . . . . . 53
Air Pollution . . . . . . . . . . . . . . . . . . . 6
Apparel . . . . . . . . . . . . . . . . . . . . . . 12
Avalanches. . . . . . . . . . . . . . . . . . . . 17
DC Outlet, 12-Volt . . . . . . . . . . . . . . 32
DET . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Detonation Elimination Technology . 34
Digital Display. . . . . . . . . . . . . . . . . . 35
Disabled Operators . . . . . . . . . . . . . . 14
Drive Belt . . . . . . . . . . . . . . . . . . . . . 20
Drive Belt Adjustment. . . . . . . . . . . . 97
Drive Belt Break-In . . . . . . . . . . . . . . 65
Drive Belt Condition . . . . . . . . . . . . . 96
Drive Belt Deflection. . . . . . . . . . . . . 96
Drive Belt Installation . . . . . . . . . . . . 99
Drive Belt Removal. . . . . . . . . . . . . . 98
Driver Awareness . . . . . . . . . . . . . . . 16
Driving Downhill. . . . . . . . . . . . . . . . 18
Driving in Hilly Terrain. . . . . . . . . . . 19
Driving on Slippery Surfaces . . . . . . 19
Driving Responsibly . . . . . . . . . . . . . 22
B
Backrest . . . . . . . . . . . . . . . . . . . . . . 30
Battery . . . . . . . . . . . . . . . . . . 108-110
Charging . . . . . . . . . . . . . 109-110
Installation . . . . . . . . . . . . . . . 108
Removal. . . . . . . . . . . . . . . . . 108
Storage. . . . . . . . . . . . . . . . . . 109
Brake Components. . . . . . . . . . . . . . 89
Brake Fluid . . . . . . . . . . . . . . . . 57, 90
Brake Inspection . . . . . . . . . . . . . . . 89
Brake Lever Feel . . . . . . . . . . . . . . . 57
Brake Lever Travel . . . . . . . . . . . . . 57
Brake System Bleeding . . . . . . . . . . 91
Brakes . . . . . . . . . . . . . . . . . . 57, 89-91
Break-In Period . . . . . . . . . . . . . . 64-65
Bulbs, Replacing . . . . . . . . . . . . . . . 92
E
Electrical System. . . . . . . . . . . . . . . . 94
Emission Control Information. . . . . . 74
Emission Control Label. . . . . . . . . . . 74
Emission Control Maintenance . . . . . 74
Emissions Limited Warranty. . 129-130
Engine Break-In. . . . . . . . . . . . . . 64-65
Engine Restarting . . . . . . . . . . . . . . . 67
Engine Stop Switch . . . . . . . . . . . . . . 70
Environment, Preservation . . . . . . . . . 6
Exhaust System . . . . . . . . . . . . . . . . . 85
Eye Protection . . . . . . . . . . . . . . . . . . 12
C
Cargo Capacity . . . . . . . . . . . . . . . . 14
Cargo Carrier . . . . . . . . . . . . . . . . . . 32
Cargo Overload . . . . . . . . . . . . . . . . 14
Cargo Rack . . . . . . . . . . . . . . . . 30, 32
Cleaning for Matte Finishes. . . . . . 111
Clutch Alignment Offset . . . . . . . . . 95
Clutch System . . . . . . . . . . . . . . . 95-99
Clutch Warning . . . . . . . . . . . . . . . . 24
Clutches . . . . . . . . . . . . . . . . . . . . . . 20
Clutching . . . . . . . . . . . . . . . . . . . . 115
Coolant. . . . . . . . . . . . . . . . . . . . . . . 86
Coolant High Temperature Light. . . 87
Coolant Level. . . . . . . . . . . . . . . . . . 86
Cooling System . . . . . . . . . . . . . . 86-88
Cooling System Bleeding . . . . . . . . 88
Cooling System Flushing. . . . . . . . . 87
Coupler Lubrication. . . . . . . . . . . . . 80
F
Fuel Filter . . . . . . . . . . . . . . . . . . . . . 84
Fuel Lines . . . . . . . . . . . . . . . . . . . . . 84
Fuel Premix (Initial Fill) . . . . . . . . . . 64
Fuel Pump . . . . . . . . . . . . . . . . . . . . . 84
Fuel Recommendation. . . . . . . . . . . . 63
Fuel Resistor . . . . . . . . . . . . . . . . . . . 33
Fuel Safety. . . . . . . . . . . . . . . . . . . . . 62
Fuel System Deicers . . . . . . . . . . . . . 63
Fuse Label . . . . . . . . . . . . . . . . . . . . . 94
134
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
G
O
Gauge Cleaning. . . . . . . . . . . . . . . . . 45
Gearcase Oil Level . . . . . . . . . . . . . . 79
Glove Box. . . . . . . . . . . . . . . . . . . . . 31
Oil Filter . . . . . . . . . . . . . . . . . . . . . . 85
Oil Injection System . . . . . . . . . . . . . 65
Oil Level . . . . . . . . . . . . . . . . . . . . . . 68
Oil Lines . . . . . . . . . . . . . . . . . . . . . . 85
Oil Recommendations . . . . . . . . . . . 64
Oil, Gearcase. . . . . . . . . . . . . . . . . . . 79
Operating in Deep Snow. . . . . . . . . . 21
Operation Warning . . . . . . . . . . . . . . 27
H
Handlebar Adjustments. . . . . . . . . . . 52
Headlight Adjusting . . . . . . . . . . . . . 30
Helmet. . . . . . . . . . . . . . . . . . . . . . . . 12
High Temperature Indicator Light . . 87
Hood Latches . . . . . . . . . . . . . . . . . . 56
P
Parking Brake Lever Lock . . . . . . . . 58
Passenger Warning . . . . . . . . . . . . . . 25
Polaris Products . . . . . . . . . . . . . . . 116
Pre-Ride Checklist . . . . . . . . . . . . . . 54
Pressure Cap Warning . . . . . . . . . . . 24
I
Ice and Snow Build-up . . . . . . . . . . . 18
IFS. . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Instrumentation . . . . . . . . . . . . . . 35-45
Intake Filters . . . . . . . . . . . . . . . . . . . 84
Intake Silencer . . . . . . . . . . . . . . . . . 20
R
Rail Slide Wear. . . . . . . . . . . . . . . . 104
Relay Label. . . . . . . . . . . . . . . . . . . . 94
Reverse . . . . . . . . . . . . . . . . . . . . . . . 72
Reverse Warning . . . . . . . . . . . . . . . 26
Rider Capacity . . . . . . . . . . . . . . . . . 13
L
Lamps, Replacing . . . . . . . . . . . . . . . 92
Light, High Temperature Indicator. . 87
Lights . . . . . . . . . . . . . . . . . . . . . 92-93
Limiter Strap Position. . . . . . . . . . . . 50
Low Oil Indicator Light . . . . . . . . . . 68
Lubrication . . . . . . . . . . . . . . . . . 79-81
S
Safety . . . . . . . . . . . . . . . . . . . . . . 8-23
Safety Decals . . . . . . . . . . . . . . . 24-27
Seat Latch . . . . . . . . . . . . . . . . . . 31, 55
Seat Storage . . . . . . . . . . . . . . . . . . . 31
Shifter . . . . . . . . . . . . . . . . . . . . . . . . 31
Shock Compression Valving . . . . . . 51
Shock Spring Preload, Front. . . . . . . 46
Skags. . . . . . . . . . . . . . . . . . . . . . . . 107
Ski Alignment. . . . . . . . . . . . . . . . . 106
Ski Pressure . . . . . . . . . . . . . . . . . . . 50
Snow Build-up . . . . . . . . . . . . . . . . . 18
Snow Conditions. . . . . . . . . . . . . . . . 21
Spark Plugs . . . . . . . . . . . . . . . . . 82, 83
M
Maintenance Interval Table . . . . 76-78
Maintenance Program. . . . . . . . . . . . 75
Maneuverability . . . . . . . . . . . . . . . . 20
Matte Finish Cleaning. . . . . . . . . . . 111
MFD Components. . . . . . . . . . . . . . . 35
MFD Digital Display Programs . 38-45
MFD Settings . . . . . . . . . . . . . . . 36-37
N
Noise . . . . . . . . . . . . . . . . . . . . . . . . . . 6
135
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
S
T
Specifications. . . . . . . . . . . . . . 114-115
Speed . . . . . . . . . . . . . . . . . . . . . . . . 15
Spring Preload, IQ . . . . . . . . . . . . . . 48
Starting the Engine . . . . . . . . . . . . . 66
Starting the Engine, Restarting . . . . 67
Steering Inspection . . . . . . . . . . . . 105
Steering System . . . . . . . . . 56, 105-107
Stop Switch . . . . . . . . . . . . . . . . . . . 70
Stopping the Engine. . . . . . . . . . . . . 67
Stopping the Snowmobile . . . . . . . . 67
Storage, Daily . . . . . . . . . . . . . . . . . 73
Storage, Extended . . . . . . . . . . 111-113
Storage, Under-Seat. . . . . . . . . . . . . 31
Survival Preparation . . . . . . . . . . . . 11
Suspension Adjustments, Front . . . . 46
Suspension Adjustments, Rear . . 47-51
Suspension Coupling, IQ. . . . . . . . . 51
Suspension Inspection . . . . . . . . . . . 60
Suspension Lubrication, Front. . . . . 80
Suspension Lubrication, Rear . . . . . 81
Suspension Performance Tips . . . . . 47
Suspension, Front . . . . . . . . . . . . . . 46
Switches
Throttle Cable Lubrication . . . . . . . . 80
Throttle Lever . . . . . . . . . . . . . . . 55, 71
Throttle Safety Switch. . . . . . . . . 55, 70
Torsion Spring Preload, IQ . . . . . . . . 49
Towing. . . . . . . . . . . . . . . . . . . . . . . . 73
Track Alignment . . . . . . . . . . . . . . . 104
Track Inspection . . . . . . . . . . . . 59, 100
Track Lubrication . . . . . . . . . . . . . . 101
Track Replacement . . . . . . . . . . . . . 100
Track Tension . . . . . . . . . . . . . 102-103
Track Warm-Up. . . . . . . . . . . . . . . . . 69
Track Warning. . . . . . . . . . . . . . . . . . 25
Transporting the Snowmobile . . . . . 113
Troubleshooting
Drive Belt Wear/Burn . . . . . . . 121
Suspension. . . . . . . . . . . . . . . . 120
Troubleshooting, Engine . 117, 118, 119
V
Vehicle Identification Numbers. . . . . . 7
W
Warning Labels/Decals . . . . . . . . 24-27
Windchill/Temperature Charts . . . . . 23
Auxiliary Shut-Off Switch. . . . 61
Engine Stop Switch . . . . . . 61, 70
Ignition Switch . . . . . . . . . . . . 61
Location. . . . . . . . . . . . . . . . . . 29
MFD Control Switch . . . . . . . . 36
Throttle Safety Switch. . . . 55, 70
136
Download from Www.Somanuals.com. All Manuals Search And Download.
|