PLL1920M
LED LCD Monitor
USER'S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
Supporting Timing Modes.......................................................................................................................................................................................14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Instructions
Thank you for purchasing this LED LCD Monitor, a high-resolution multi-scan color LED LCD
Monitor. Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This LED LCD Monitor
generates, uses, and can radiate radio frequency energy. Harmful interference to radio
communication may be led as a result if it‘s not properly installed and used. However, there is no
guarantee that interference will not occur in a particular installation. If this LED LCD Monitor does
cause serious interference to radio or television reception, resetting the LED LCD Monitor may
determine it. Moreover, users are encouraged to correct interference by doing one or more of the
following:
ꢀReorient or relocate the receiving antenna.
ꢀMove the LED LCD Monitor and the receiver further away from each other.
ꢀConnect the LED LCD Monitor into an outlet on a circuit different from that to which the
receiver is connected.
ꢀConsult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes
or modifications to this LED LCD Monitor would void the user‘s authority to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
According to WEEE regulation, this LED LCD Monitor can't be handled as normal trash in Europe when it is
out of usage. Please refer to the recycle information on Planar’s website to handle it.
For more information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
This LED LCD Monitor is manufactured and tested on a ground principle that a user’s safety
comes first. However, improper use or installation may result danger to the LED LCD Monitor as
well as to the user. Carefully go over the following WARNINGS before installation and keep this
guide handy.
WARNINGS:
ꢀ This LED LCD Monitor should be operated only at the correct power sources
indicated on the label on the rear end of the LED LCD Monitor. If you’re unsure of
the power supply in your residence, consult your local dealer or power company.
ꢀ Do not try to repair the LED LCD Monitor yourself as it contains no user-serviceable parts. The
LED LCD Monitor should only be repaired by a qualified technician.
ꢀ Do not remove the LED LCD Monitor cabinet. There is high-voltage parts inside that may
cause electric shock to human bodies, even when the power cord is disconnected .
ꢀ Stop using the LED LCD Monitor if the cabinet is damaged. Have it checked by a service
technician.
ꢀ Put your LED LCD Monitor only in a clean, dry environment. Unplug the LED LCD Monitor
immediately if gets wet and consult your service technician.
ꢀ Always unplug the LED LCD Monitor before cleaning it. Clean the cabinet with a clean, dry
cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen.
ꢀ Keep the LED LCD Monitor away from magnetic objects, motors, TV sets, and transformer.
ꢀ Do not place heavy objects on the cable or power cord.
ꢀ
For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed near the equipment and
shall be easily accessible.
ꢀ
Due to safety concerns, if the VESA mounting kit is purchased separately, please make sure
the mounting kit is UL-Listed, and replaceable only by service personnel.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
First Setup
Congratulation for purchasing this LED LCD Monitor of high performance!
This LED LCD Monitor comes with the following accessories:
•
•
•
LED LCD Monitor
Power Cable
VGA Cable (15 pin)
•
•
•
User's Guide
BNC to RCA adaptor
Base
Install the stand base
1. Lay the LED LCD Monitor flat on a table with the LCD screen face down. To prevent the
monitor from being scratched, put a piece of soft cloth on the table on which the screen will be
set.
2. Unpack the stand and mount it onto the base, aligning the base with the hook for the base.
3. Slide the stand upward until you hear a click, which indicates that the stand is attached and
installed.
4. Stand the LED LCD Monitor up.
Uninstall the stand base
1. Lay the LED LCD Monitor flat on a table with the LCD screen face down. To prevent the LED
LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Locate the hook at the bottom of the stand.
3. Hold down the LED LCD Monitor firmly with one hand. With the other hand, lift the hook up
with your finger, do not let go. At the same time push the stand down. Make sure you slide the
stand down slowly or you may damage both the LED LCD Monitor and the stand.
4. The stand will move down and is no longer installed.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Front View of the Product
① ② ③ ④ ⑤
OSD Turn On/ Off
①
②
③
④
⑤
Volume Down/ Scroll Down/ Adjust Decrease
Volume Up/ Scroll UP/ Adjust Increase
Input select/ Confirm Selection
Power On/ Off and LED Indicator
Note: ▲/▼ button will be performed as volume down/ up control when
OSD menu is disabled.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View of the Product
⑥
⑦
⑧
⑨ ⑩ ⑪ ⑫ ⑬
AC Power Switch
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
AC Power Input
VGA Input (D-Sub 15 pin)
Composite-1 Video Input (BNC)
Composite-2 Video Input (BNC)
Composite-1 Video Output (BNC)
Composite-2 Video Output (BNC)
VGA/ AV/ Signal Audio Input (Left/ Right)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to External Devices
Connect Video/ Audio cables from compatible devices into the back panel of LED LCD Monitor.
BNC Coaxial Cable (not
supplied)
BNC Coaxial Cable (not
supplied)
Audio in Cable
(not supplied)
Channel Digital
Video Recorder
Camera
Camera
BNC Coaxial Cable (not supplied)
External LED LCD Monitor
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
VGA (15pin D-Sub): Connect the VGA cable from VGA output of the computer to the VGA
terminal input of your LED LCD Monitor. Also, connect the green end of the Audio In cable from
the audio output of your computer to the audio input terminal (red/white) of LED LCD Monitor.
PC
Audio In Cable
(not supplied)
VGA 15Pin Cable
Connecting with the Power Cord
Connect the power cord to the power cord connector on the back of your LED LCD Monitor, and
plug the other end of the power cord into a correctly grounded electrical outlet, and flip the main
power switch on LED LCD Monitor to the ON ( I ) position. LED LCD Monitor will enter standby
mode and the power indicator will light up orange.
AC Switch
Switch to ON
AC power
socket
Power cable
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Before using the LED LCD Monitor:
Connect external equipments properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the LED LCD Monitor on/off:
Press POWER button on the front of LED LCD Monitor. The power LED indicator lights blue when
the LED LCD Monitor is on.
Selecting input source
Press the 2 button on the front panel, and use ▲▼ button to select the required input source
between AV1, AV2 or PC and then press 2 to confirm.
Using the OSD Menu
You are able to use OSD menus to adjust various settings by using menu button on the front of
the LED LCD Monitor.
The basic operation is as following:
•
•
•
•
•
•
•
Press 1 to display OSD menu.
Use 2 to select OSD menu page.
Press ▲▼ to enter the OSD menu page.
Use ▲▼ to select the optional item you want to adjust.
Press 2 to adjust levels or select the items.
If the item is marked with , press 2 to enable the function.
Press 1 again to exit current OSD page.
OSD Lock Out Function
When TFT LCD Monitor is in normal display, you can enable the“OSD Lock Out”function.
Option 1: OSD lock – all 4 buttons are locked except the“POWER”button.
Press and hold the ▼ button and then the
button for 3 seconds to lock the OSD buttons.
The TFT LCD Monitor will show an“OSD Lock Out”message for 5~10 seconds and the message
will disappear automatically.
Repeat this step to unlock.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: OSD & Power button lock – all 5 buttons including the“POWER”button are locked.
Press and hold the ▲ button and then the button for 3 seconds to lock all 5 buttons.
The LED LCD Monitor will show an“Lock Out”message for 5~10 seconds and the message will
disappear automatically.
Repeat this step to unlock.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Operation—OSD Menu
You can use the OSD menu to adjust various settings for your LED LCD Monitor.
Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.
Picture Menu
—To adjust the picture quality
In AV1, AV2 source:
In PC source:
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Brightness: To adjust luminance of video.
Contrast: To adjust contrast of video.
Tint: To adjust tint level.
Color: To adjust color.
Sharpness: To adjust picture sharpness.
Color Temp.: To select Color Temperature from Normal, Cool, and Warm with 2.
Sound Menu
—To set the audio quality and status
Note: The PC menu icons are only enabled in PC source.
ꢀ
ꢀ
ꢀ
ꢀ
Bass: To adjust the bass.
Treble: To adjust the treble.
Balance: To adjust the left and right audio balance.
Volume: To adjust the volume.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu
—To adjust OSD setting
Note: The PC menu icons are only enabled in PC source.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
OSD Language: To select the OSD language between English, French, German, Spanish,
Italian, Portuguese, Dutch, Swedish with 2.
AV Switch: Set the timer to 15, 30, 45, or 60 seconds will swtich from AV1 source to AV2 source,
or vice versa.
Sleep: Set to automatically turn off the monitor. Once it is set to“ON”, the monitor will be
automatically turned off in 3 hours.
No Signal Sleep: When this is set to "ON", the monitor will be automatically turned off after
“No Signal”have been detected for 10 minutes.
Reset: Press 2 to reset all the settings in OSD page.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Menu
—To adjust for PC
It is only active in PC source.
ꢀ
Auto Adjust: To auto adjust picture’s horizontal position, vertical position, fine tune and
H-Size.
ꢀ
ꢀ
ꢀ
ꢀ
H-Position: To adjust the horizontal position of the picture.
V- Position: To adjust the vertical position of the picture.
Clock: To adjust delay time of clock in order to reduce the noise of picture.
Phase: To adjust delay time of phase in order to reduce the noise of picture.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Supporting Timing Modes
STANDARD
VGA
RESOLUTION
640x480 @ 60Hz
720x400 @ 70Hz
640x480 @ 72Hz
640x480 @ 75Hz
800x600 @ 56Hz
800x600 @ 60Hz
800x600 @ 72Hz
800x600 @ 75Hz
1024x768 @ 60Hz
1024x768 @ 70Hz
1024x768 @ 75Hz
1152x864 @ 75Hz
1280x960 @ 60Hz
1280x1024 @ 60Hz
1280x1024 @ 75Hz
640x480 @ 67Hz
832x624 @ 75Hz
1152x870 @ 75Hz
VGA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
MAC
MAC
MAC
Note: Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings.
Similar PC Timing on list below:
• 640 x 400 @ 70Hz / 720 x 400 @ 70Hz
• 640 x 350 @ 70Hz / 720 x 350 @ 70Hz
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to your LED LCD Monitor.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Information
Panel
48.26 cm (19”) TFT (with LED back light)
On: 25 Watts (typical), 35 Watts (maximum)
Power Management
Standby Mode: < 0.5 Watt
Off: < 0.5 Watt
Displayable Resolution
SXGA 1280 x 1024 max.
Vertical Frequency 75Hz max.
0.294 x 0.294 mm
Pixel Dimension
Display Color
Tilt
16.7M
-1°（+/-1）~20°（+/-2）
376.32 mm x 301.06 mm
Active Display Area
Temperature
Operating: 0°C ~ +40°C
Storage: -20°C ~ + 60°C
Compliance
Power
FCC-B, CE, UL/cUL
Input Voltage AC100-240 V
1W x 2
Speaker
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall-mount instruction
Preparing To Install The Optional Wall Mount Arm (not included)
This LED LCD Monitor can be attached to a wall mounting arm
you can purchase separately.
Turn the power OFF then disconnect the cables from the LED
LCD Monitor before performing the procedure below.
1. Lay the LED LCD Monitor face down on a soft surface.
2. Remove the hinge cover.
3. Remove the 4 screws holding the stand to the hinge.
4. Remove the stand.
100mm x 100mm Screw
Mounting Options
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting arm:
1. Place the wall mounting arm onto the back of the LED LCD
Monitor. Line up the holes of the arm with the holes in the
back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User’s Guide that came
with the optional wall mounting arm for instructions on
attaching it to the wall.
4mm, 0.7 pitch
threaded holes x 4
NOTE
•
100mmx100mm VESA high hole (n=4), M4, pitch =0.7 mm
screw mounting kit not included.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
Care
ꢀAvoid exposing your LED LCD Monitor directly to sunlight or other heat source. Place your LED
LCD Monitor away from the sun to reduce glare.
ꢀPut your LED LCD Monitor in a well ventilated area.
ꢀDo not place any heavy things on top of your LED LCD Monitor.
ꢀMake certain your LED LCD Monitor is installed in a clean and moisture-free area.
ꢀKeep your LED LCD Monitor away from magnets, motors, transformers, speakers, and TV sets.
Note
ꢀMove the LCD out of the package and take off the plastic bag and Polystyrene Foam.
ꢀPull the base from Parallel versus Panel to Vertical.
ꢀAdjust the Panel within -1 degree leaning forward and 20 degree leaning backward. You must
bend harder to exceed 20 degree backward but this range is for packing the unit to a small
size for storage only.
Safety Tips
ꢀIf smoke, abnormal noise or odor came out from your LED LCD Monitor, caution you should
remove the power cord immediately and call your service center.
ꢀNever remove the rear cover of your LED LCD Monitor cabinet. The display unit inside contains
high-voltage parts and may cause electric shock to human bodies.
ꢀNever try to repair your LED LCD Monitor yourself. Always call your service center or a qualified
technician to fix it.
Troubleshooting
No power
ꢀMake sure A/C power cord is securely connected to the power adapter and the power supply
is firmly connected to the LED LCD Monitor.
ꢀPlug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
ꢀMake sure all signal cables are installed.
Power on but no screen image
ꢀMake sure the video cable supplied with the LED LCD Monitor is tightly secured to the video
output port on back of the computer. If not, tightly secure it.
ꢀAdjust brightness.
Wrong or abnormal colors
ꢀIf any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
ꢀConnect the LED LCD Monitor to another computer.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Support
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touch
Technical Support
touch screen drivers, warranty information and access to Planar's Technical Library for online
troubleshooting. To speak with Planar Customer Support please have you model and serial
number available and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|