Mini Hi-Fi System
FW-V330
Download from Www.Somanuals.com. All Manuals Search And Download.
≤
1
2
£
™
3
4
5
6
¡
)
7
(
8
9
0
!
@
*
&
^
%
#
$
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 6
------------------------------------------------- 35
Bahasa Melayu ----------------------------------- 64
Bahasa Indonesia -------------------------------- 93
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Changing vocal.......................................................... 23
Adjusting the microphone echo ........................... 23
Adjusting the key tone ........................................... 23
General Information
Supplied accessories .................................................. 7
Environmental information ....................................... 7
Safety information....................................................... 7
Radio Reception
Tuning to radio stations ......................................... 24
Storing preset radio stations...........................24–25
Automatic preset programming
Manual preset programming
Tuning to preset radio stations............................. 25
Erasing a preset radio station ............................... 25
Changing tuning grid ............................................... 25
Preparations
Rear connections ................................................... 8–9
Power
Antennas connection
Speakers connection
Video Out Connection
Connecting other equipment to your system
Inserting batteries into the remote control ......... 9
Tape Operation/Recording
Loading tape .............................................................. 26
Playing tapes .............................................................. 26
Rewinding/Fast forwarding .................................... 27
General information on recording ...................... 27
Preparation for recording ...................................... 27
One touch recording / Recording
Controls
Controls on the system and remote
control..................................................................10–12
Basic Functions
Plug and Play ............................................................. 13
Demonstration mode ............................................. 14
Switching the system on ........................................ 14
Switching the system to standby mode .............. 14
Dim mode ................................................................. 14
Volume control......................................................... 14
the mixed sound ...................................................... 27
CD Synchronised start recording .................. 27–28
Dubbing tapes ........................................................... 28
Karaoke
Microphone mixing ................................................. 28
Sound control ........................................................... 15
Digital Sound Control (DSC)
Dynamic Bass Boost (DBB)
Clock/Timer
View clock ................................................................. 29
Clock setting............................................................. 29
Timer setting ......................................................29–30
Deactivating the timer
Activating the timer
Sleep timer setting................................................... 30
CD/VCD/MP3-CD Operations
Discs for playback .................................................... 16
About MP3 disc ..................................................16–17
Loading discs ............................................................. 17
Playing discs ............................................................... 17
Replacing discs during playback ............................ 17
Selecting a desired track/passage ......................... 18
Selecting a desired Album/Title
External sources
Listening to external sources ................................ 31
(MP3 disc only)......................................................... 18
Repeat play ................................................................ 18
Programming the disc tracks ..........................18–19
Erasing the programme .......................................... 19
Maintenance.............................................. 31
Specifications ........................................... 32
Troubleshooting ............................. 33–34
VCD Operations
Adjusting theTV system ........................................ 20
On screen display (OSD) ....................................... 20
Playing a video CD with PBC functions.............. 21
Returning to menu screen ..................................... 21
Quick review ............................................................ 21
Playing a specific passage repeatedly ................... 22
Resume playback from the last stop point......... 22
Picture effect ............................................................. 22
Slow
Zoom
6
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
IMPORTANT!
Safety information
PLEASE NOTETHATTHE VOLTAGE
SELECTOR LOCATED ATTHE REAR OF
THIS SYSTEM IS PRESET AT 220V FROM
THE FACTORY. FOR COUNTRIESTHAT
OPERATE AT 110V-127V, PLEASE ADJUST
TO 110V-127V BEFOREYOU SWITCH ON
THE SYSTEM.
G
Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
G
G
Place the system on a flat, hard and stable
surface.
Supplied accessories
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
– 2 speaker boxes
– remote control
– batteries (two AA size) for remote control
– AM loop antenna
– FM wire antenna
G
G
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
– OneVideo cinch cable
Environmental information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
The lens may cloud over when the system is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the system in the warm environment until
the moisture evaporates.
G
G
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Television
AM loop
antenna
L
AUDIO
FM wire antenna
OUT
R
VIDEO
IN
AM
ANTENNA
VIDEO
OUT
speaker
(right)
speaker
(left)
B
FM
ANTENNA
D
AUX/CDR
R
L
SUBWOO
OU
E
+
VOLTAGE
SELECTOR
R
110V-
C
127V
—
—
220V-
240V
L
+
SPEAKERS 6Ω
A
AC power cord
Rear connections
B Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals.Adjust the
position of the antenna for optimal reception.
The type plate is located at the rear of the
system.
A Power
AM Antenna
Before connecting the AC power cord to the
wall outlet, ensure that the following are done;
G
Position the antenna as
far as possible from a
TV,VCR or other
radiation source.
– If your system is equipped with a
VOLTAGE
SELECTOR
Voltage Selector, set theVOLTAGE
SELECTOR to the local power line
110V-
127V
220V-
240V
voltage.
– All other connections have been made.
FM Antenna
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
G
For better FM stereo
reception, connect an
outdoor FM antenna to
the FM ANTENNA
terminal.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
C Speakers Connection
E Connecting other equipment to your
system
Front Speakers
Use a cinch cable to connect AUX/CDR IN to
the analogue audio out terminals of an external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder).
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", coloured (marked) wire to "+" and black
(unmarked) wire to "-".
Note:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX/CDR IN left terminal. Alternatively, you
can use a “single to double” cinch cable (the output
sound still remain mono).
2
1
G
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Inserting batteries into the
Notes:
remote control
– For optimal sound performance, use the
supplied speakers.
Insert two batteries type R06 or AA into the
remote control with the correct polarity as
indicated by the "+" and "-" symbols inside
the battery compartment.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
D Video Out Connection
Connect the VIDEO OUT terminal at the rear
of the system to theTV orVCRVIDEO IN for
viewing or recording.
Note:
– To avoid magnetic interference with the picture
on yourTV, do not position the front speakers too
close to theTV.
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls (main system’s illustrations on page 3)
! Mode Selection
Controls on the system and
remote control
PLAY•PAUSE ÉÅ
for CD/VCD/MP3-CD…to start or interrupt
playback.
forTape ............... to start playback.
for Plug & Play…(on the system only) to initiate
and start plug & play mode.
1 STANDBY ON y
–
to switch the system on or to standby mode.
2 SLEEP
–
to activate/deactivate or set the sleep timer.
SEARCH•TUNING à (ALBUM -)
SEARCH•TUNING á (ALBUM +)
for MP3-CD ..... to select previous/next album.
forVCD .............. to move the zoomed picture to
the left or right.
for CD/VCD .... to search backward/forward.
forTuner ............. to tune to a lower or higher
radio frequency.
3 DIGITAL SOUND DISPLAY
–
the active DSC will be lighted.
4 TUNER (BAND)
–
–
–
to select waveband : FM or MW.
TAPE (TAPE 1•2)
to select tape deck 1 or 2.
forTape ............... to rewind or fast forward.
for Clock ............ (on the system only) to set the
hour.
AUX (CDR/VIDEO)
to select the input for an additional appliance.
5 VCD 1 / 2 / 3
STOP•CLEAR / DEMO STOP Ç
for CD/VCD/MP3-CD…to stop playback or to
clear a programme.
forTuner ............. (on the system only) to stop
programming or to erase a
(VCD.CD 1/2/3 - MP3.CD 1/2/3)
to select disc tray 1, 2 or 3.
–
–
VCD 1 (NTSC/PAL)
(on the system only) to select corresponding
video output for NTSC or PAL system of your
TV set (except Multi-systemTV).
selected preset.
forTape ............... to stop playback or recording.
for Demo........... (on the system only) to activate/
deactivate the demonstration.
6 OPEN/CLOSE
to open or close the disc tray.
–
for Clock ............ (on the system only) to exit clock
setting or cancel timer.
for Plug & Play…(on the system only) to exit plug
& play mode.
7 DISC CHANGE
to change disc(s).
–
8 DIGITAL SOUND CONTROL (DSC)
to activate the jog control for DSC selection.
–
PREV í / PRESET 4 (TITLE -)
NEXT ë / PRESET3 (TITLE +)
for MP3-CD ..... to select previous/next title.
forVCD .............. to move the zoomed picture
down or up.
................................. to select next or previous menu
or track during playback (for VCD
with PBC switched on).
9 Jog control
–
to select the desired sound effect for the
selected sound feature.
DSC ..................JAZZ, ROCK,TECHNO or
OPTIMAL.
DBB ..................DBB 1, DBB 2, DBB 3 or
DBB OFF.
for CD/VCD .... to skip to the beginning of the
current, previous, or next track.
forTuner ............. to select a preset radio station.
for Clock ............ (on the system only) to set the
minute.
0 DYNAMIC BASS BOOST (DBB)
–
to activate the jog control for DBB selection.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
@ VCD operations (for VCD version 2.0 only)
£ Display screen
to view the current status of the system.
–
PBC
–
–
to switch on or off the playback control mode.
24
Disc tray
RETURN
to return to the previous menu level during
playback (forVCD with PBC switched on).
25 VCD operations (on remote control only)
OSD
–
to switch on or off the On Screen Display on
theTV.
# Tape deck 1
$ Tape deck 2
ZOOM
–
–
–
to enlarge a still picture of theVCD on theTV
screen.
% Tape deck operations
A. REPLAY
RESUME
–
to select continuous playback in either AUTO
REPLAY or ONCE mode only.
to continue playback again from where you have
stopped (forVCD with PBC switched off).
RECORD
VOCAL
–
to start recording on tape deck 2.
to fade out the original vocal from a Karaoke
VCD or to switch between mono or stereo
mode during audio disc playback.
^ PROG
for CD/VCD/MP3-CD…to programme disc
tracks.
forTuner ............. to programme preset radio
KEY CONTROL ( I È i
)
stations.
for Clock ............ to select 12- or 24-hour clock
mode.
–
to change theVCD key tone level to suit your
vocal range.
I
........................... to decrease the key tone level.
È.............................. to restore the key tone level to
original setting.
i............................. to increase the key tone level.
& CLOCK•TIMER
–
to view the clock, set the clock or set the timer.
* DIM
to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
ECHO -/+
to adjust theVCD echo level for karaoke after
inserted the microphone.
–
–
( n
SLOWÖ
to watch theVCD at a slower speed.
–
to connect headphones.
–
–
) MIC
A - B
–
to connect microphone jack.
to playback a certain scene or passage of a CD/
VCD repeatedly.
¡ MIC LEVEL
–
to adjust the mixing level for karaoke or
microphone recording.
DIGEST
–
to scan through aVCD or a specific track.
™ MASTERVOLUME (VOLUME +/-)
to increase or decrease the volume.
§ IS (not functional for this model)
–
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
27
REPEAT
–
to playback track/disc/programme repeatedly.
• Numeric keys (0 – 9)
(numbers consisting more than two figures must be
keyed in within 2 seconds.)
–
to direct key in a track number for
CD/VCD/MP3-CD.
ª B
–
to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (for exampleTAPE 1/2,
TUNER).
– Then select the desired function (for
exampleÉ, í, ë).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
IMPORTANT!
Before operating the system, complete the
preparation procedures.
To exit without storing the Plug and Play
Press Çon the system.
➜ If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
G
Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during Plug
and Play, "CHECK ANTENNA" will be displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
First time setup/power up
1
2
When you turn on the main supply, "AUTO
INSTALL- PRESS PLAY" is displayed.
PressÉÅ on the system to start installation.
➜ "INSTALL" is displayed, followed by "TUNER"
and "AUTO".
➜ PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
2
In standby or demonstration mode, press and
holdÉÅon the system until "AUTO INSTALL
-PRESS PLAY" is displayed.
PressÉÅagain to start installation.
➜ All previously stored radio stations will be
replaced.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Dim mode
You can select the desired brightness for the
display.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
G
In any source mode (except standby mode),
press DIM repeatedly to select : DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
To activate the demonstration
G
G
In standby mode, press and holdÇon the
system until "WELCOME" is displayed.
➜ The demonstration will begin.
➜ DIM is shown, except for DIM OFF mode.
To deactivate the demonstration
Press and holdÇon the system until
"DEMO OFF" is displayed.
➜ The system will switch to standby mode.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.
Note:
– In standby mode, pressing DIM to select half or
full brightness for clock display.
Switching the system on
In standby/demonstration mode
Volume control
G
G
G
Press STANDBY ON to switch on the last
selected source.
Adjust MASTERVOLUME (or press
VOLUME + or - on the remote control) to
increase or decrease the volume level.
Press VCD 1/2/3 (VCD.CD 1/2/3), TUNER,
TAPE (TAPE 1/2) or AUX.
To listen through the headphones
Connect the headphones plug to
the n socket at the front of the
system.
Press OPEN/CLOSE.
➜ The system will switch to CD mode.
G
Switching the system to standby
mode
➜ The speakers will be muted.
In demonstration mode
G
G
Press and hold Ç on the system.
In any other source mode
Press STANDBY ON (or B on the remote
control).
➜ The clock will appear on the display when the
system is in standby mode.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Automatic DSC-DBB selection
Sound control
The best DBB setting is generated automatically
for each DSC selection. You can manually select
the DBB setting that best suits your listening
environment.
Digital Sound Control (DSC)
The DSC feature enables you to enjoy special
sound effects that have preset equaliser settings,
providing the best music reproduction.
1
2
Press DSC.
➜ The selected DSC is shown.
Adjust the jog control (or press DSC on the
remote control repeatedly) to select : JAZZ,
ROCK,TECHNO or OPTIMAL.
Dynamic Bass Boost (DBB)
There are three DBB settings to enhance the
bass response.
1
2
Press DBB.
➜ The selected DBB is shown, except for
DBB OFF mode.
Adjust the jog control (or press DBB on the
remote control repeatedly) to select : DBB 1,
DBB 2, DBB 3 or DBB OFF.
Note:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
IMPORTANT!
About MP3 disc
– This system is designed for regular discs.
Therefore, do not use any accessories such
as disc stabiliser rings or disc treatment
sheets, etc., as offered on the market,
because they may jam the changer
mechanism.
Supported formats
– ISO9660, Joliet, Multisession
– Max. track number plus album is 255
– Max. nested directory is 8 levels
– The max. album number is 32
– The max. MP3 programme track number is 99
– SupportedVBR bit-rate
– Do not load more than one disc into
each tray.
– Supported sampling frequencies for MP3 disc
are: 32 kHz, 44.1 kHz, 48 kHz
– Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps)
Before viewing theVideo CD, ensure that
the set is switched to corresponding PAL
or NTSC system of yourTV set
(exception Multi-systemTV).
Making your own MP3-CD
1
2
Rip the music from your own Digital Audio CDs
or download legal MP3 music from the Internet.
Discs for playback
This system is able to play :
Record (“burn”) the music on CD-R(W) disc
with your home PC. Make sure to use a
recording speed not faster than indicated on the
CD-R(W) and avoid running other programmes
simultaneously on your PC during the recording
process.
– All pre-recorded audio CDs
– All finalised audio CDR and audio
CDRW discs
– All pre-recorded video CDs
– MP3-CDs (CD-ROMs with MP3 tracks)
Make sure filename ends with .mp3
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
Playing discs
Sound Quality
Take note that MP3-CD compilations should
best contain only MP3 tracks (.mp3). To
a disc is loaded in the disc tray
achieve a good MP3 quality, a bit rate of
128 kbps is recommended.
the current selected disc tray is empty
the current selected disc tray is loaded
or playing
Loading discs
1
2
Press OPEN/CLOSE to open the disc tray.
To play all discs on the disc tray
PressÉÅ.
➜ All the available discs will play once, then stop.
➜ During playback, the selected disc tray, track
number and elapsed playing time of the current
track are displayed.
Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray
is ready for loading.
G
➜ For MP3 disc, TITLE is shown. For mixed
mode discs, only one mode will be selected for
playback depending on the recording format.
To play the selected disc only
In CD mode, press VCD 1, VCD 2 or VCD 3
on the system.
G
➜ The selected disc will play once, then stop.
3
Press OPEN/CLOSE to close the disc tray.
➜ "READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
➜ For MP3 disc, the name of the first album
and title will be scrolled through the display once
and followed by "AXX TXXX".
To interrupt playback
PressÉÅ.
➜ The current track time flashes.
G
G
To resume playback, pressÉÅagain.
To stop playback
G
Press Ç.
Notes:
– Load the discs with the label side facing up.
– For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
Replacing discs during playback
1
2
Press DISC CHANGE.
➜ The disc tray will open without interrupting
current playback.
To change the inner disc, press DISC
CHANGE again.
➜ "DISC CHANGE" is displayed and the disc
will stop playing.
➜ The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
Selecting a desired track/passage
Selecting a desired Album/Title
(MP3 disc only)
To search for a particular passage during
playback
To select a desired album
G
Press à or á to select four different search
speed.
➜ "FRX1" ; "FRX2" ; "FRX3" or "FRX4" is
displayed on theTV screen when you select a
fast rewind search.
➜ "FFX1" ; "FFX2" ; "FFX3" or "FFX4" is
displayed on theTV screen when you select a
fast forward search.
➜ Normal playback will begin at the end of the
fast rewinding or forwarding of the selected
track.
G
G
Press ALBUM -/+ (à or á) repeatedly.
➜ ALB starts flashing and the album’s name will
scroll through the display once.
To select a desired title
Press TITLE -/+ repeatedly (à / á or
numeric keys 0-9 on the remote control).
➜ TITLE starts flashing and the title’s name will
scroll through the display once.
Repeat play
You can select and change the various play
modes before or during playback.
G
Play returns to normal whenÉÅ is pressed or
when a new track is selected.
1
2
Press REPEAT on the remote control
repeatedly to select :
➜ "TRACK" – to repeat playback of the current
track.
➜ "DISC" – to repeat playback of the current
disc.
➜ "PROGRAM" – to repeat playback of the
programmed tracks.
To select a desired track
G
G
Press í or ë (or numeric keys 0-9 on the
remote control) repeatedly until the desired
track is displayed.
If playback is stopped, pressÉÅto start
playback.
Note:
To resume normal playback, press REPEAT
until "REPEAT OFF" is displayed.
➜ REP is shown, except for REPEAT OFF mode.
– Maximum track selection from digital keys on
the remote control is 199 for MP3-CD and 99 for
VCD/CD.
Notes:
– During programme play mode, it is not possible
to repeat playback the current disc (Repeat Disc
mode).
– Pressing theÇ button will cancel all repeat
modes.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
To review the programme
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
G
G
Stop playback and pressí or ë repeatedly.
To exit review mode, press Ç.
Erasing the programme
1
2
Load the desired discs on the disc tray (refer to
“Loading discs”).
G
Press Ç once when playback is stopped or
twice during playback.
➜ PROG disappears and "PROGRAM CLEARED"
is displayed.
Press VCD 1/2/3 to select a disc.
➜ Programming can only be done on the
selected disc.
3
4
Press PROG to start programming.
➜ PROG starts flashing.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
Press í or ë (or numeric keys 0-9 on the
remote control) repeatedly to select the desired
track.
G
For MP3 disc, press ALBUM -/+ and
TITLE -/+ to select the desired album and
title for programming.
For Recording, please refer to “Tape
Operation/Recording”.
5
G
Press PROG to store the track.
Repeat steps 3–5 to store other discs and
tracks.
6
To end programming, press Ç once.
➜ PROG stays and the programme mode
remains active.
➜ The total number of tracks programmed and
the total playing time are displayed.
➜ For MP3 disc, total playing time will not be
shown.
7
To start programme play, pressÉÅ.
➜ "PLAY PROGRAM" is displayed.
Notes:
– To programme from a video CD, the PBC mode
has to be switched off.
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If the total playing time is more than "99:59"
then "--:--" is displayed instead of the total
playing time.
– If you attempt to programme more than 99
tracks, "FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD Operations
Adjusting theTV system
Before viewing the video CD, ensure that the
mini system is switched to corresponding PAL or
NTSC system of yourTV set (except Multi–
systemTV).
1
2
In CD/VCD mode, press and hold VCD 1 for
more than three seconds.
Press and hold VCD 1 again to switch between
PAL or NTSC.
➜ The setting will remain after it has been set.
Note:
– Before adjusting theTV system, make sure that
there is no MP3-CD in disc tray 1 during power up.
On screen display (OSD)
If you are playing a video CD, yourTV screen will
able to display the messages of the current
operating status (for example, PLAY, STOP) and
the information stored in the disc.
G
Press OSD on the remote control repeatedly to
switch on or off the On Screen Display mode.
When OSD is switched on, you can see the
following display on theTV screen.
PLAY XX/TT
MM:SS
– "XX" is the current track.
– "TT" is the total tracks.
– "MM" is in minutes.
– "SS" is in seconds.
Note:
– You can also view the information from a
MP3-CD or normal CD.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD Operations
Playing a video CD with PBC
Quick review
This feature allows you to scan through aVCD
for a quick review. PBC mode must be
switched off. There are four digest modes for
selection.
functions (for VCD version 2.0 only)
VCD with PBC (Playback Control) will be
indicated on the display of the set as soon as
they are inserted. PBC is a predefined play
sequence stored in theVCD.
1
Press DIGEST on the remote control.
➜ "DIGEST" is displayed.
➜ "1.INTRO SCAN" , "2.DIGEST DISC" ,
"3.DIGESTTRACK" and "4.EXIT DIGEST
MENU" appear onTV screen.
1
2
Switch on theTV, insert aVCD with PBC and
pressÉÅ to start playback.
MENU appears on theTV screen.
If the menu consists of a list of tracks,
you can select a track directly
Press numeric keys 0–9 on the remote
control to select your choice.
➜ TheVCD starts playing of the selected
sequence automatically.
1. INTRO SCAN
2. DIGEST DISC
3. DIGESTTRACK
G
4. EXIT DIGEST MENU
Note:
– If a menu consists of more than one page, press
¡ / ™ to go through the pages.
G
G
Press digit 1 on the remote control to select
"INTRO SCAN".
➜ The first 10 seconds of each track is played.
Switching off PBC
In stop mode, press PBC.
➜ “PBC OFF” is displayed onTV screen.
G
Press digit 2 on the remote control to select
"DIGEST DISC".
➜ The first frame of each track appears on the
TV screen.
Notes:
– When PBC mode is switched on, it is not
possible to programme the disc track.
– The menu structure depends on the information
stored in theVCD. Please refer to the information
supplied with the disc.
➜ Press digit 0 – 9 on the remote control to
playback the desired tracks.
➜ Press í or ë to view the previous or next
page for additional information.
G
Press digit 3 on the remote control to select
"DIGESTTRACK".
Returning to menu screen
➜ The first track of the selected disc will be
divided into 9 sessions and displayed on theTV
screen.
➜ Press digit 0 – 9 on the remote control to
playback the desired session.
G
Press RETURN to return to the previousVCD
disc menu level. PBC mode must be
switched on.
➜ Press í or ë to digest the next track.
2
To exit Digest mode, press digit 4 on the
remote control to select "EXIT DIGEST
MENU".
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD Operations
Picture effect
Playing a specific passage
repeatedly
This feature is also applicable to audio CD
(except for MP3-CD). To play a certain scene or
passage of the disc repeatedly.
Slow
1
2
Press SLOW on the remote control to watch a
VCD at a slower speed.There are three types of
slow modes to select.
➜ The sound is muted.
➜ OnTV screen,“SLOW 1”,“SLOW 2” or
“SLOW 3” is displayed.
1
Press A-B on the remote control during
playback to mark the start of the chosen scene
or passage.
➜ "SET A" is displayed
To resume playback at normal speed, press ÉÅ.
2
G
3
Press A-B again to mark the end of the chosen
scene or passage.
➜ "SET B" is displayed
Zoom
This feature enables you to view a still picture
frame in an enlarge mode.
The selected scene or passage is played
repeatedly.
➜ "PLAY AB" is displayed
1
2
During playback, press ÉÅ to have a still
picture on theTV screen.
➜ The sound is muted.
Press A-B once more to return to normal
playback.
➜ "CLEAR AB" is displayed
➜ OnTV screen,“PAUSE” is displayed.
Press ZOOM on the remote control once to
enlarge the still picture by two times.
Notes:
– You can also cancel A-B Repeat by pressingí
orë.
– You are able to set the A-B marking within the
same track only. Once it crosses from one track to
the next, the A-B marking is reset.
➜ OnTV screen,“ZOOM” is displayed.
G
G
3
4
You can move the zoomed picture left or right
by pressing à or á respectively.
You can move the zoomed picture down or up
by pressing í or ë respectively.
Press ZOOM once more to return to normal
still frame.
Resume playback from the last
stop point
Press ÉÅ to continue playback.
This feature is also applicable to audio CD
(except for MP3-CD).
G
In stop mode, press RESUME on the remote
control to start playback again from where you
have stopped.
Note:
– Resume information is lost if you have changed
the disc, opened the disc tray, change source or
disconnected the system from the power supply.
– Resume is not available when PBC mode is
switched on.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD Operations
Changing vocal
Adjusting the key tone
This feature allows you to fade out the original
vocal from a karaokeVCD. You can also use it to
select the desired language.
This feature allows you to change the key tone
of your vocal range.
G
G
G
Press I on the remote control to decrease
vocal key level.
➜ "KEY -X" is displayed.
G
Press VOCAL on the remote control
repeatedly to select the following modes :
➜ STEREO ™ STEREO VOCAL LEFT ™
STEREO VOCAL RIGHT ™ MONO LEFT ™
MONO RIGHT ™ STEREO…
Press i on the remote control to increase vocal
key level.
➜ "KEY +X" is displayed.
Press È on the remote control to restore vocal
key to original setting.
➜ "KEY FLAT" is displayed.
STEREO
same effect as the original recorded disc.
–
–
STEREOVOCAL LEFT/RIGHT
fade out the original vocal for special recorded
Karaoke disc only (ECHO mode must be
switched on).
Note:
– “X” denotes the key level.
MONO LEFT/RIGHT
–
select the language on a bilingualVCD.
Adjusting the microphone echo
This feature allows you to add echo while singing
or talking through a microphone.
G
Press ECHO -/+ on the remote control to
decrease, increase or switch off the echo effect.
➜ "ECHO +X" or "ECHO OFF" is displayed.
Notes:
– “X” denotes the echo level.
– You are advised to switch off the echo effect
when not using the feature.
– If microphone is not inserted,“INSERT MIC”
is displayed.
– Echo will switch off automatically when unplug
the microphone from the system.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Tuning to radio stations
1
Press TUNER to selectTUNER mode.
➜ "TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
Automatic Preset Programming
➜ If an FM station is received in stereo, is
displayed.
G
1
G
Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
2
3
Press TUNER again to select the desired
waveband : FM or MW.
Press TUNER to selectTUNER mode.
Press and hold à or á until the frequency
indication starts to change, then release.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
To begin automatic preset from a desired
preset number
Press í or ë to select the desired preset
number.
4
Repeat step 3 if necessary until you find the
desired radio station.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
G
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.
2
Press and hold PROG until "AUTO" is displayed.
➜ PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To stop storing the automatic preset
G
Press PROG or Ç on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
Manual Preset Programming
Erasing a preset radio station
1
2
Tune to your desired radio station (refer to
“Tuning to radio stations”).
1
2
Press í or ë to select the preset radio station
to be erased.
Press PROG.
Press and hold Çon the system until
“PRESET DELETED” is displayed.
➜ The deleted radio frequency remains on the
display.
➜ PROG starts flashing.
➜ The next available preset number is displayed
for selection.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
To store the radio station to another
preset number
Press í or ë to select the desired preset
number.
G
3
G
G
Repeat steps 1–2 to erase other preset radio
stations.
Press PROG again to store the radio station.
➜ PROG disappears.
Changing tuning grid (not available for
Repeat steps 1–3 to store other radio stations.
all versions)
To exit manual preset mode
Press Ç on the system.
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas). The preset
frequency step in the factory is 9 kHz.
G
Notes:
– If you attempt to store more than 40 preset
radio stations, "FULL" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the programme
mode automatically.
Changing the tuning grid will erase all
previously stored preset radio stations.
1
2
Disconnect the system from the AC power
supply (pull out the AC power cord).
While holding down TUNER and á on the
system, reconnect the system to the AC power
supply.
➜ The display will show "GRID 9" or
"GRID 10".
Tuning to preset radio stations
G
Once you’ve programmed the radio stations,
press í or ë to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband are displayed.
Notes:
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
– The FM tuning grid also will be changed from
50 kHz to 100 kHz or vice versa.
For Recording, please refer to “Tape
Operation/Recording”.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation / Recording
IMPORTANT!
Playing tapes
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may
get jammed or may burst in the
To playback a selected tape deck
Press TAPE (or TAPE 1/2 on the remote
control) repeatedly to select tape deck 1 or 2.
1
mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a transformer,
TV or speaker).
2
PressÉÅ.
To stop playback
Press Ç.
G
To select automatic replay or one time
playback
G
Press A. REPLAY repeatedly to select the
different playback modes.
Loading tape
➜ "AUTO REPLAY" (
is displayed.
) or "ONCE" (
)
1
2
Press on the tape deck to
open the tape deck door.
AUTO REPLAY …the tape will rewind
Load the tape with the
open side downward and
full spool to the left.
automatically at the end of
playback and replay again. It will
replay up to a maximum of 20
times.
3
Close the tape deck door.
ONCE ..............the tape will playback the
selected side once and then stop.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation / Recording
Preparation for recording
Rewinding / Fast forwarding
1
2
Press TAPE to selectTAPE 2.
1
2
Stop playback, press à or á.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
Load a recordable tape into tape deck 2 with full
spool to the left.
Press Ç to stop rewinding or fast forwarding.
3
Prepare the source to be recorded.
VCD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (VCD or
TUNER, for example).
When recording is in progress
➜ REC starts flashing.
General information on
recording
G
G
It is not possible to listen to another source,
except tape dubbing.
G
If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
For recording, use only tape of IEC type I
(normal tape).
It is not possible to activate the timer function
during recording or tape dubbing.
G
G
One touch recording / Recording
the mixed sound
The recording level is set automatically,
regardless of the position of theVolume, DBB,
DSC and so forth.
The tape is secured at both ends with leader
tape. At the beginning and
1
Press VCD 1/2/3, TUNER or AUX to select
the source.
G
G
You can connect a microphone to record the
mixed sound (refer to “Karaoke - Microphone
Mixing”).
end of the tape, nothing will
be recorded for six to seven
seconds.
G
G
To prevent accidental
recording, break out the tab
on the left shoulder of the
tape side you want to protect.
If “CHECK TAPE” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
2
3
Start playback of the selected source.
Press RECORD to start recording.
To stop recording
Press Ç on the system.
G
Note:
– OneTouch Recording is not possible inTAPE
mode, "SELECT SOURCE" will be displayed.
CD Synchronised start recording
1
Press VCD 1/2/3 to select the disc.
G
Press í or ë to select the desired track to
start recording.
IMPORTANT!
G
You can programme the tracks in the order you
want them to be recorded (refer to “CD/VCD/
MP3-CD Operations - Programming the disc
tracks”).
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.
2
Press RECORD to start recording.
➜ The disc will start playback automatically.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation / Recording
To select another track during recording
3
Press RECORD.
➜ Playing and recording will start simultaneously.
➜ "DUB" is displayed.
1
2
PressÉÅto interrupt recording.
Press numeric keys 0-9 on the remote
control to select the desired track.
➜ The desired track will start playing.
G
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop recording
Press Ç.
➜ Recording and disc playback will stop
simultaneously.
G
To stop dubbing
Press Ç.
G
Notes:
Dubbing tapes
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
1
2
G
Press TAPE to select tape mode.
Load the prerecorded tape in tape deck 1.
You can set the tape to the desired passage
where recording will start.
Karaoke
2
3
4
Press VCD 1/2/3, TUNER, TAPE or AUX to
select the source to be mixed and start playback.
Adjust the volume level of the source with
MASTERVOLUME control.
Adjust the microphone volume with microphone
MIC LEVEL control.
Note:
– Keep the microphone away from the speakers to
prevent howling.
Microphone mixing
Connect a microphone (not supplied) to the
system allowing you to sing along with the music
source.
For Recording, please refer to “Tape
Operation/Recording”.
1
Connect a microphone to the MIC jack.
G
Before connecting the microphone, set the
microphone MIC LEVEL to the minimum level
to prevent howling sound.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
To exit without storing the setting
Press Çon the system.
View clock
The clock (if it is set) will be shown in standby
mode.
G
Notes:
To view the clock in any source mode
(VCD orTUNER for example)
Press CLOCK•TIMER.
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
G
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, "--:--" is
displayed.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
Clock setting
Timer setting
The clock can be set in either 12-hour or
24-hour mode ("12:00 AM" or "00:00", for
example)
The system can switch on toVCD,TUNER or
TAPE mode automatically at a preset time,
serving as an alarm to wake you up.
1
In standby or view clock mode, press
CLOCK•TIMER once. In other source mode,
press CLOCK•TIMER twice.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
2
3
4
5
Press PROG repeatedly to select clock mode.
➜ "12:00 AM" or "00:00" starts flashing.
Press à or á on the system repeatedly to set
the hour.
Press í or ë on the system repeatedly to set
the minute.
Press CLOCK•TIMER again to store the
setting.
➜ The clock starts working.
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
➜ "12:00 AM" or "00:00" or the last timer
setting starts flashing.
➜
starts flashing.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
2
Press VCD 1/2/3, TUNER or TAPE to select
the desired source.
➜ “CD1[or 2, 3] XX:XX" indicates the CD
mode is selected.
➜ “TUXX:XX” indicates theTuner mode is
selected.
➜ “TA1[or 2] XX:XX” indicates theTape
mode is selected.
Activating the timer (for the same preset
time and source)
1
2
Press and hold CLOCK•TIMER for more than
two seconds.
Press CLOCK•TIMER again to store.
➜ The last set timer information is displayed for
a few seconds and is shown.
G
Before setting timer, make sure the music source
has been prepared.
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time.
VCD 1/2/3 – Load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck.
1
2
Press SLEEP repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
3
4
5
Press à or á on the system repeatedly to set
the hour for the timer to start.
15™ 30™ 45™ 60™ 90™ 120™
Press í or ë on the system repeatedly to set
the minute for the timer to start.
OFF™ 15…
➜ "SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
Press CLOCK•TIMER to store the timer.
➜ "TIMER ON" is displayed, followed by the set
timer "XX:XX" and the selected source.
When you reach the desired length of time, stop
pressing the SLEEP button.
➜
remains on the display.
➜
is shown, except for "OFF" mode.
➜ The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
G
G
At the preset time, the selected sound source
will play.
To exit without storing the setting
Press Çon the system.
Notes:
To check the remaining length of time
after sleep timer is activated
Press SLEEP once.
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available,Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
G
G
To change the preset sleep timer
Press SLEEP again while the remaining sleep
timer is shown.
➜ The display will show the next sleep timer
options.
Deactivating the timer
To deactivate the sleep timer
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
1
2
Press and hold CLOCK•TIMER for more than
two seconds.
G
Press Ç on the system to cancel the timer.
➜ "CANCEL" is displayed and the disappears.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
External Sources
Notes:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to “Tape
Operation/Recording”.
Listening to external sources
1
2
Connect the audio out terminals of the external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
Press AUX to select external equipment.
➜ "AUX" is displayed.
Maintenance
Cleaning the Cabinet
Cleaning the Heads and theTape Paths
To ensure good recording and playback quality,
clean the heads A , the capstan(s) B, and
pressure roller(s) C after every 50 hours of
tape operation.
G
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
G
Cleaning Discs
G
G
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You can also clean the heads by playing a
cleaning tape once.
G
G
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out.
Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended for
analogue records.
C
B
A
B
C
Cleaning the disc lens
G
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Demagnetising the heads
G
Use a demagnetising tape available at your
dealer.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TAPE DECK
AMPLIFIER
Frequency response
Normal tape (type I)...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)................................ ≥ 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
Output power ......................................... 800W PMPO
........................................................................ 2 x 20 W RMS
Signal-to-noise ratio.......................... ≥ 67 dBA (IEC)
Frequency response .......................... 50 – 15000 Hz
Input sensitivity
AUX/CDR In .......................................... 500 mV / 1V
Microphone .......................................................... 3.5 mV
Output
SPEAKERS
System .................................... double port bass reflex
Impedance........................................................................ 6 Ω
Woofer .................................................... 1 x 4" full range
Dimensions (w x h x d) . 210 x 310 x 235 (mm)
Weight................................................................ 2.9 kg each
Speakers ....................................................................≥ 6 Ω
Headphones...................................... 32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10%THD)
CD/VCD/MP3-CD PLAYER
GENERAL INFORMATION
Number of programmable tracks ......................... 99
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio....................................... ≥ 80 dBA
Channel separation ..........................≥ 60 dB (1 kHz)
Total harmonic distortion........................... < 0.003%
MPEG 1 ................................................. VCD version 2.0
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ....................................... 32-256 kbps
(128 kbps advised)
Material .............................................................. Polystyrene
AC Power ............................ 110 – 127 / 220 – 240V;
....................................................... 50/60 Hz Switchable
Power Consumption
Active ......................................................................... 35 W
Standby ................................................................. < 15 W
Dimensions (w x h x d) .... 265x 310x 365 (mm)
Weight (without speakers)................................. 5.8 kg
Sampling frequencies .......................32, 44.1, 48 kHz
Specifications and external appearance are
subject to change without notice.
RADIO RECEPTION
FM wave range ................................... 87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz)........... 530 – 1700 kHz
Tuning grid ............................................................9/10 kHz
Number of presets ........................................................ 40
Antenna
FM ....................................................................... 75 Ω wire
AM.............................................................. Loop antenna
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to solve a problem by following these hints, consult your dealer or service centre.
Problem
Solution
CD OPERATION
“UNREADABLE DISC” is displayed.
–
–
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
–
–
Replace or clean the disc, see “Maintenance”.
Use a finalised CD-RW or a correct MP3-CD
format disc.
“NO DISC” is displayed.
No picture onTV screen.
No colour onTV screen.
–
–
–
Insert a disc.
Connect the cable betwen the system andTV.
Change the system to the respective PAL or
NTSC setting.
Cannot adjust theTV system to
PAL or NTSC.
–
Remove the MP-3 CD from disc tray 1 or press
DISC CHANGE to select a non MP3 disc tray
RADIO RECEPTION
Radio reception is poor.
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the Mini HiFi
System and yourTV orVCR.
TAPE OPERATION/RECORDING
Recording or playback cannot be made.
–
–
–
Clean deck parts, see “Maintenance”.
Use only NORMAL (IEC I) tape.
Apply a piece of adhesive tape over the missing
tab space.
The tape deck door cannot open.
–
Remove and reconnect the AC power plug and
switch on the system again.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
GENERAL
The system does not react when
buttons are pressed.
–
Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor
quality.
–
–
–
–
–
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
Make sure the MP3 disc was recorded within
32-256 kbps bit rate with sampling frequencies at
48 kHz, 44.1 kHz or 32 kHz.
The left and right sound outputs are
reversed.
–
–
Check the speaker connections and location.
The remote control does not function
properly.
Select the source (VCD 1/2/3 orTUNER, for
example) before pressing the function button
(É,í,ë).
–
–
Reduce the distance between the remote
control and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
–
–
Point the remote control directly towards the IR
sensor .
The timer is not working.
–
–
Set the clock correctly.
Press and hold CLOCK•TIMER to switch on the
timer.
–
–
–
If recording or tape dubbing is in progress, stop
recording.
The Clock/Timer setting is erased.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features
automatically.
Press and hold Çon the system to switch off
the demonstration.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|