USER
MANUAL
MODEL 515
DB-15 Surge Protector
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
Part# 07M515-A
Doc# 074220UA
Revised 11/22/96
Download from Www.Somanuals.com. All Manuals Search And Download.
5.0 INSTALLATION
APPENDIX A
PATTON MODEL 515 SPECIFICATIONS
The Patton Model 515 is simple to install and requires no user
configuration. Follow these installation steps.
1. Disconnect the DB-15 data cable from the device you are
protecting in a manner consistent with the manufacturer’s
installation instructions.
General
Standards:
RS-232, RS-422/423/485, T1
Surge Capacity:
Connectors:
Compliance:
1500 Watts for 1 mS
2. Be sure the metal D-15 connector on the device you are
protecting is connected to frame ground. If not, contact Patton
Technical Support for further instructions.
One male and one female DB-15
CE marked for EMC directive 89\336\EEC
(ESD/EFT); Compliant with IEC 801-5
(surge)
3. Plug the DB-15 connector of the Model 515 directly into
the DB-15 Serial port of the device you are protecting. Use of
a serial cable reduces the effectiveness of the protection you
would otherwise receive.
Model 515/25
Pins Protected:
Response Time:
All 15 pins on the RS-232 interface
Clamped to + or - 18 volts after 0.5 µS,
400 Amps with a 8/20 µS pulse
4. Re-attach the DB-15 cable to the available DB-15 connector on
the Model 515. The Model 515 is now inserted between the
data port and the data cable, and will provide up to 1500 Watts
of protection to the data port.
Model 515/6
Note: We recommend that a Patton surge protector be
connected to the other end of the data cable as well.
Pins Protected:
Response Time:
All 15 pins on the RS-422/423/485 interface
Clamped to + or - 7.5 volts after 0.5 µS,
400 Amps with a 8/20 µS pulse
Model 515/T1
Pins Protected:
Response Time:
Pins 1, 3, 9 & 11 on the T1 interface
Clamped to + or - 7.5 volts after 0.5 µS,
400 Amps with a 8/20 µS pulse
Copyright ©
Patton Electronics Company
All Rights Reserved
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear Valued Customer,
Thank you for purchasing Patton Electronics products! We do
appreciate your business. I trust that you find this user manual helpful.
We manufacture one of the widest selections of data communications
products in the world including CSU/DSU's, network termination units,
powered and self-powered short range modems, fiber optic modems, interface
converters, baluns, electronic data switches, data-line surge protectors,
multiplexers, transceivers, hubs, print servers and much more. We produce
these products at our Gaithersburg, MD, USA, facility, and can custom
manufacture products for your unique needs.
We would like to hear from you. Please contact us in any of the
following ways to tell us how you like this product and how we can meet your
product needs today and in the future.
Web:
(301) 975-1000
(301) 975-1007
(301) 869-9293
Sales E-mail:
Support E-mail:
Phone - Sales
Phone - Support
Fax:
Mail:
Patton Electronics Company
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
We are committed to a quality product at a quality price. Patton
Electronics is BABT and ISO 9001 certified. We meet and exceed the highest
standards in the industry (CE, UL, etc.).
Please contact us and let us know how we may provide you with the
answers to your needs.
Thank you.
Burton A.Patton
Vice President
P.S. Please tell us where you purchased this product.
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|