Operating Instructions
3 CCD Color Camera Head
Model No.
GP-US522HA
GP-US532HA
3 CCD Color Camera CCU
Model No.
GP-US522CUA
Lens : Purchased locally
Cable : Option
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Download from Www.Somanuals.com. All Manuals Search And Download.
PREFACE
Panasonic's GP-US522/532 Industrial Digital Signal
Processing Color 3-CCD Camera overcomes space limita-
tions that have complicated many video applications.
The GP-US522/532 incorporates Three 380 000-pixels (768
(H) x 494 (V)) Interline Transfer CCDs to give you a remark-
able 800 lines (750 lines for GP-US532) of horizontal reso-
lution and a S/N ratio is 62 dB. This means a color picture
with high visual information content, for excellent image
detail.
Because it features digital signal processing, the GP-
US522/532 provides an exceptionally stable picture.
FEATURES
1. High-performance micro prism optical system with
three IT CCDs
7. Gen-Lock capability
8. SMPTE color bar generator
2. 800 lines of horizontal resolution for GP-US522 and 750
lines for GP-US532
9. Automatic Gain Control (AGC) and Electronic Light
Control(ELC) are available
3. Signal to noise ratio of 62 dB
10. Automatic (AUTO), Step (STEP) and Manual (MANU)
setting of Electronic shutter modes are selectable
11. 12V DC operation
12. RGB and S-Video Outputs
13. Character Generator Input
4. Minimum scene illumination with + 18 dB gain of 5 lx at
F2.8 for GP-US522 and 9 lx at F2.2 for GP-US532
5. Auto Tracing White Balance (ATW), Auto White Balance
Control (AWC) or Manual White Balance Control are
selectable
14. 2 SCENE files are selectable
6. Automatic Setting of Black Balance (ABC) or Manual
Setting
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
1. Do not attempt to disassemble the camera or
camera control unit.
8. Clean the faceplate with care.
Do not clean the faceplate with strong or abrasive
detergents. Use lens tissue or a cotton tipped applica-
tor and ethanol.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside.
Ask a qualified service person for servicing.
9. Put the lens cap on the camera after using the
camera.
2. Handle the camera and the camera control unit with
care.
After using the camera, turn the power of the camera
control unit off, and put the lens cap on the camera
head.
Do not abuse the camera and the camera control unit.
Avoid striking, shaking, etc. The camera could be dam-
aged by improper handling or storage.
10. Do not connect units other than the camera head to
the GP-US522CUA camera control unit.
3. Do not expose the camera or camera control unit to
rain or moisture, or try to operate it in wet areas.
Turn the power off immediately and ask a qualified ser-
vice person for servicing. Moisture can damage the
camera and the camera control unit, and also create
the danger of electric shock.
Other connections may result in improper operation.
11. Do not operate the camera and the camera control
unit beyond the specified temperature, humidity, or
power source ratings.
Use the camera and the camera control unit under con-
ditions where temperature is between 0°C - +45°C
(32°F - 113°F), and humidity is below 90%. The input
power resource is 12 V DC.
4. Do not drop anything inside the camera or camera
control unit.
Dropping a metal part for example inside the camera
and camera control unit could permanently damage
the unit.
12. Ask a qualified service person for installation.
All necessary procedures with regards to installation of
this product should be made by qualified service per-
son or system installer.
5. Do not crush or pinch the camera cable.
Avoid tight bends in the camera cable.
Cautions
6. Never face the camera toward the sun.
Do not aim the camera at bright objects. Whether the
camera is in use or not, never aim it at the sun or other
extremely bright objects. Otherwise, blooming or smear
may be caused.
1. Connecting or disconnecting the camera cable
to/from the camera control unit or camera head
must be done after turning off the power of the
camera control unit.
2. Use GP-CA522/4 (4 m/13 ft) camera cable only
for connection between the camera head and
camera control unit. Do not extend the cable.
7. Do not use strong or abrasive detergents when
cleaning the camera or the camera control unit
body.
Use a dry cloth to clean the camera or the camera con-
trol unit when dirty.
In case the dirt is hard to remove, use a mild detergent
and wipe gently.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Camera Head
1. Lens Mount
This is used to attach the special C-mount lens for GP-
US522 and the C-mount lens for GP-US532.
2. Camera Cable Connector
This 24-pin connector is used to connect the optional
camera cable GP-CA522/4 to the camera control unit.
3. Camera Mounting Screw Hole
This hole (1/4" - 20) is used to mount the camera onto
a mounting bracket.
q
e
w
Camera Control Unit
[Front Panel]
GAIN
PAGE ITEM
HIGH
ATW
AWC
MANU
LOW
OFF
LEVEL
TITLE
CAMERA
(AWC)
B
(ABC)
DC POWER
R
1
ON
CAM
BAR
ON
2
OFF
OFF
SCENE ELC
GAIN
Camera Control Unit GP-US522
4. Power ON/OFF Switch (DC POWER ON/OFF)
6. Automatic/Manual Gain Selector Switch
(GAIN HIGH/LOW/OFF)
This switch turns the power of this unit and the power
supply for the camera head on or off.
This selector is used to select the gain of video amplifi-
er as follows.
5. Power Indicator (POWER)
This indicator lights up red when the power switch is
turned on.
The mode can be selected in the SET UP menu.
Refer to page 16.
MODE
AUTO
POSITION OF SW
GAIN
Maximum +18 dB
Maximum + 9 dB
0 dB
HIGH
LOW
OFF
HIGH
LOW
OFF
+18 dB (Fixed)
+9 dB (Fixed)
0 dB
MANU
5
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Camera/Color Bar Selector (CAM/BAR)
12. Item Button (ITEM/AWC)
This selector is used to select either the video signal or
the SMPTE color bar signal which is output from the
video output connector (VIDEO), YC (S-VIDEO) output
connector or RGB (D-SUB, 9-pin) output connector.
CAM :The video signal from the camera is output.
BAR : The SMPTE color bar signal is output.
While the SETUP menu is displayed, this button is
used to move the cursor to the downward.
Normally, when the white balance selection switch
(ATW/AWC/MANU) is set to AWC, this button is used
to set the automatic white balance control (AWC).
13. Left Button (A/ABC)
Set this switch to BAR when making video monitor
adjustments and recording the color bar signal.
While the SETUP menu is displayed, this button is
used to move the cursor to the left.
Normally, this button is used to set the automatic black
balance control (ABC).
8. White Balance Selector (ATW/AWC/MANU)
This selector is used to select one of the following
white balance modes.
14. Right Button (B)
ATW: In this mode, the color temperature is monitored
continuously and thereby white balance is set
automatically.
This button is used to move the cursor to the right in
the SETUP menu.
AWC: In this mode, accurate white balance is
obtained.
15. Scene File Selector (SCENE)
This selector is used to select the scene files.
The white balance settings are as follows:
1. Aim the camera at white chart.
2. Press the ITEM (AWC) button on the front
panel to set the white balance.
16. Electronic Light Control ON/OFF Selector
(ELC ON/OFF)
This selector is used to select the electronic light con-
trol from followings.
3. When the auto white balance is completed,
the auto warning indicator first blinks and then
goes off.
If the auto warning indicator remains lit, repeat the
above procedure for setting the auto white bal-
ance.
ON : Enables Electronic Light Control (ELC) mode and
disables Electronic Shutter Speed (SHUTTER)
mode.
OFF : Enables Electronic Shutter Speed (SHUTTER)
mode and disables Electronic Light Control (ELC)
mode.
MANU: The white balance can be adjusted manually
with the red gain (R GAIN) and blue gain controls
(B GAIN).
Note :
• Confirm the setting of the ELC and SHUTTER
parameters on the SETUP menu.
9. Auto Warning Indicator
This indicator blinks while the white balance or black
balance is being automatically set. This indicator lights
continuously when the white balance or black balance
is set improperly. In this case, follow the auto white
balance or black balance setting procedure.
17. Electronic Shutter Speed Control (LEVEL)
This control is used to set the target value of
Electronic Shutter Speed between 1/60 and 1/10
000 second together with the ELC ON/OFF switch.
10. Red and Blue Gain Controls (R GAIN/B GAIN)
These controls are used to manually adjust the white
balance.
18. Title Input Connector (TITLE)
This connector is used to connect the optional
Character Generators WJ-KB30 or WJ-KB50.
Note :
These controls only work when the white balance
selection switch (ATW/AWC/MANU) is set to MANU.
Turn the controls clockwise to increase the red and
blue signal levels, and counterclockwise to decrease.
The Black & White characters of the generator are
mixed with the video signal and are obtained at
VIDEO OUT, S-VIDEO (Y/C) OUT and RGB/SYNC
OUT connectors.
Colourization of characters is not available.
11. Page Button (PAGE)
This button is used to display the SETUP MENU by
pressing it for 2 seconds or more, and to change the
parameters in the SETUP MENU.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
19. Camera Cable Connector (CAMERA)
This 20-pin connector is used for connection with the
camera head via the optional camera cable GP-
CA522/4.
Camera Head Side
Camera Control Unit Side
1 +15V Input
1 Ground (GND)
2 Not used
3 PBLK Input
4 +9V Output
2 Ground (GND)
3 Chip Select Input
4 +25 Input
Fasten the camera cable to this connector firmly.
If not, noise may be appeared.
5
−9V Input
5
−9V Output
6 B Signal Output
7 RGB Ground (GND)
8 Serial Data Input
9 Serial Clock Input
10 CCD Select Output
11 G Signal Output
12 R Signal Output
13 VD Input
14 CPOB Output
15 HD Input
16 +9V Input
17 +5V Input
18 PBLK Output
19 Not used
6 28MHz Output
7 CPOB Input
8 RGB Ground (GND)
9 +5V Output
10 B Signal Input
11 Serial Clock Output
12 VD Output
13 Chip Select Output
14 +25 Output
15 R Signal Input
16 Serial Data Output
17 HD Output
18 G Signal Input
19 +15V Output
Caution
Connecting or disconnecting the camera cable
to/from the camera control unit or camera head
must be done after turning off the Power of the
camera control unit.
For Camera
For CCU
1
2
5
24
23
22 21 20 19 18
17 16 15 14 13
6
10
15
11
12 11 10
9
4
8
3
7
6
5
19
16
20 Not used
20 CCD Select Input
20
2
1
21 Not used
22 Not used
23 28MHz Input
24 Not used
[Rear Panel]
75Ω
ON
S-VIDEO
OUT
DC 12V IN
VBS/HD
VD
RS-232C
OFF
1
VIDEO
2
RGB/SYNC
20. Gen-lock Signal Input Connector (VBS/HD)
21. Gen-Lock Signal Input Connector (VD)
Supply the external vertical drive (VD) pulse to this
connector.
The color video signal of the camera is automatically
synchronized with the gen-lock signal (Composite
Signal, Black Burst Signal or Video Sync) when either
signal is supplied to this connector.
The gen-lock signal is used for system reference.
Caution :
22. Gen-Lock Video 75 Ω Termination ON/OFF Switch
(75 Ω ON/OFF)
When looping through the gen-lock video signal with a
BNC "T" adapter, set this switch to OFF. When not
looping through, set this switch to ON.
If the gen-lock signal is jittery (as in the case of a
VCR playback picture), the camera cannot be syn-
chronized properly.
23. Video Output Connector (VIDEO 1,2)
A 1.0V[p-p]/75 Ω composite video signal is provided
at this connector.
(External HD and VD Mode)
The horizontal and vertical pulse of the color video
signal is synchronized with the external HD fed to
this connector and external VD fed to the VD input
connector.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
24. S-Video Output Connector (S-VIDEO OUT)
The luminance (Y) and chrominance (C) signals for
VCR or monitor are provided at this connector.
26. RS-232C Connector (RS-232C)
1
5
4
3
6
9
Signal
RS-232C
Ground
TXD
Pin No
1
2
3
4
5
6
7
8
9
2
1
S-VIDEO OUT (Mini-DIN,4-pin)
Description
RXD
DSR
Pin No.
Ground
DTR
1
2
3
4
Y Ground
C Ground
CTS
Y Signal Output (0.714V[p-p](Y level)/75 Ω)
C Signal Output (0.286V[p-p](Burst Level)/75 Ω)
RTS
Ground
Note: Refer this connection to a qualified service par-
son or system installer.
25. RGB/SYNC Output Connector (RGB/SYNC)
The red, green, blue, sync and composite video sig-
nals are provided at this connector.
27. 12V DC Input Terminals (12V DC IN)
These terminals accept an external DC power source
supplying nominal power of 12V DC, 0.7A.
5
1
9
6
RGB/SYNC (D-SUB,9-pin)
Pin No.
Description
Ground( GND)
Cautions :
1
2
3
4
5
6
7
8
9
1. Connect to 12V DC (11.5 V - 16 V) class 2 power
supply only.
2. To prevent fire or electric shock hazard, use a UL
listed wire VW-1, Style 1007 cable for 12 V DC
input terminals.
Ground (GND)
Red (R) Output (0.7V[p-p]/75 Ω)
Green (G) Output (0.7V[p-p]/75 Ω)
Blue (B) Output (0.7V[p-p]/75 Ω)
Composite Video Output (1.0V[p-p]/75 Ω)
Sync (SYNC) Output (4.0V[p-p] or 0.3V[p-p]/75 Ω)
Ground (GND)
Ground (GND)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Cautions :
Gen-lock Operation
1. Keep the DC POWER ON/OFF switch in the OFF posi-
tion until all connections have been properly made.
2. Connect the camera head and camera control unit.
1. Connect the camera cable between the camera head
and the camera control unit.
2. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video input connector of Special
Effects Generator (SEG), and between the VBS/HD
input connector of the camera control unit.
Internal Sync Operation
1. Connect the camera cable between the camera head
and the camera control unit.
2. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video monitor or VCR.
CCU
75Ω
ON
S-VIDEO
OUT
DC 12V IN
VBS/HD
VD
RS-232C
OFF
1
VIDEO
2
RGB/SYNC
Video
Monitor
VCR or
Video Monitor
VIDEO Out
75ΩVIDEO
75ΩVIDEO
VBS/HD In
Hi-Z
Hi-Z
Coaxial
Cable
IN
OUT
IN
OUT
75Ω set to ON
CCU
75Ω
S-VIDEO
OUT
DC 12V IN
CCU
VBS/HD
VD
ON
RS-232C
OFF
75Ω
S-VIDEO
OUT
1
VIDEO
2
DC 12V IN
VBS/HD
VD
ON
RS-232C
RGB/SYNC
OFF
1
VIDEO
2
RGB/SYNC
VBS/HD In
VIDEO Out
75Ω set to ON
VIDEO In
Black Burst
Out
Special Effects Generator
(SEG)
3. Connect the power cable between the DC 12 V input
terminals and the 12 V DC power supply unit (obtained
locally).
• The maximum cable length between camera control
unit and power supply unit is calculated as follows:
3. Connect the power cable between the DC 12 V input
terminals and the 12V DC power supply unit (obtained
locally).
11.5 V DC < VA - (R x 0.42 x L) < 16 V DC
L : Cable length (meter)
Cautions :
R : Resistance of copper wire (Ω/meter)
1. Connect to 12 V DC (11.5 V - 16 V) class 2 power
supply only.
VA
: DC output voltage of power supply unit
2. To prevent fire or electric shock hazard, use a UL
listed wire VW-1, Style 1007 cable for 12 V DC
input terminals.
L standard = VA - 12 / 0.42 x R (meter)
L minimum = VA - 16 / 0.42 x R (meter)
L maximum = VA - 11.5 / 0.42 x R (meter)
Cautions :
1. Connect to 12 V DC (11.5 V - 16 V) class 2 power
supply only.
2. To prevent fire or electric shock hazard, use a UL
listed wire VW-1, Style 1007 cable for 12 V DC
input terminals.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Lens
Caution :
Keep the POWER ON/OFF switch of the camera con-
trol unit in the OFF position throughout the installation.
Lens Mount
1. Remove the front cap of the camera head and confirm
that the surface of the optical filter of the camera head
is clean.
If the surface of the optical filter is dirty clean it with a
blower brush which is for film camera lenses (available
at your local camera store).
2. Mount the C-mount lens by turning it clockwise onto
the lens mount of the camera head.
Cautions:
• Do not use any lens which has more than 1/8"
(3.5mm) of protrusion for lens mounting. (GP-
US522)
• Do not open the lens iris wider than the F2.8 stops.
(GP-US522)
• Do not open the lens iris wider than the F2.2 stops.
(GP-US532)
Special C-mount:
Less than 1/8”
(Less than 3.5mm)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
It is described in the following section: “2. SETUP
OPERATION”.
Note:
1. CAMERA SETUP MENU
This camera utilizes a user setup menu that is dis-
played on-screen.
The setup menu contains various items that form a
tree-type structures as shown below.
The SETUP menu is output from the VIDEO 1, 2
connectors, the S-VIDEO OUT connector, and the
RGB/SYNC connector.
SET UP
MENU
Camera
ID
ON/OFF
FLD/FRM
Light
Control
(ELC)
Shutter
Gain
AUTO/MANU
SYNC
EXT
Scene File
Black
Balance
HD
INT
VBS VS
VD
ABC MANU
VD
ON
OFF
(Speed)MANU
Camera
ID
Editing
ELC
Area
Peak/Ave
AGC
Area
Peak/Ave
Manual
Adjustment
RGB Sync
RGB Sync
SC-Coase
SC-Fine
RGB Sync
R-Pedestal
B-Pedestal
PAGE 1
Camera
ID
Manual
Area
PAGE 2
Display
Position
Setting
Page Button (PAGE) :
2. SETUP OPERATION
This button used to display the SETUP menu.
Use this button to select an item.
This camera utilizes a user setup menu (SETUP) that is
displayed on the monitor.
To set items on the SETUP menu, use the following
buttons on the front panel of the camera control unit.
Item Button (ITEM) :
This button is used to move the cursor downwards.
Left Button (A)
This button is used to move the cursor to the left. Use
this button to select or adjust the parameters of the
selected item. The parameter changes each time this
button is pressed.
Page Button
Item Button
Left Button
Right Button
Right Button(B)
GAIN
PAGE ITEM
This button is used to move the cursor to the right. Use
this button to select or adjust the parameters of the
selected item. The parameter changes each time this
button is pressed.
HIGH
ATW
AWC
MANU
LOW
OFF
LEVEL
(AWC)
(ABC)
R
B
1
ON
CAM
BAR
2
OFF
SCENE ELC
GAIN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
• Opening the SETUP menu
• All Reset Operation
Press the PAGE button for a few seconds.
All Reset allows you to reset all setup menu items to
the factory settings if you are unsure about the correct
settings. Proceed as follows:
1. Repeat the above procedures to display the
SETUP menu.
2. Move the cursor to END at the bottom line.
3. Press both A and B for a few seconds. The
SETUP menu disappears on the monitor screen
and the auto warning indicator lights red.
At this time, all adjustments and parameters are reset
to the factory default settings. The auto warning indica-
tor goes off if AWC or ABC is performed.
** SET UP **
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
OFF
SHUTTER
GAIN
AUTO
INT
SYNC
BLACK BAL
SCENE FILE
ABC
*SCENE1
END
• Editing the SETUP menu
To edit the SETUP menu (change settings), press the
ITEM button to move the cursor to an item, and press
A and B to change its parameter. After completing all
the settings, move the cursor to END at the bottom
line, and press the PAGE button. The new values are
stored in the EEPROM (Electric Erasable and
Programmable Read Only memory). These values
remain valid until new values are stored, even if the
power of the camera control unit is off.
** SET UP **
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
OFF
SHUTTER
GAIN
AUTO
INT
SYNC
BLACK BAL
SCENE FILE
ABC
*SCENE1
END
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PROCEDURES
To erase all characters in the editing area
Move the character cursor to RESET and press the PAGE
button. All characters in the editing area disappear.
1. Camera Identification
(CAMERA ID)
You can use the camera identification (CAMERA ID) to
assign a name to the camera. The camera ID consists of
up to 16 alphanumeric characters. You can select whether
to have the camera ID displayed on the monitor screen or
not.
To determine the display position of the CAMERA ID
1. Move the cursor to POSI, and press the PAGE button.
The display shown below appears and the CAMERA
ID starts blinking.
** SET UP **
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
OFF
Blinking
SHUTTER
GAIN
AUTO
INT
SYNC
BLACK BAL
SCENE FILE
ABC
*SCENE1
GP-US522
END
2. Move the CAMERA ID to the desired position by press-
ing A, Bor the ITEM button.
3. Press the PAGE button to fix the position of the CAM-
ERA ID. The mode returns to the previous CAMERA ID
menu.
To edit the CAMERA ID
1. Move the cursor to the CAMERA ID parameter.
2. Press the PAGE button. The CAMERA ID menu
appears. The cursor on the letter “A” starts blinking.
Notes:
Character Cursor
• The CAMERA ID stops at the edges of the monitor
screen.
• The CAMERA ID moves faster if any of A, B or
the ITEM button is kept pressed for a second or
longer.
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
().,'":;&#!?=
+-*/%$
Character
Area
To return to the SETUP menu
Move the cursor to RET and press the PAGE button. The
SETUP menu appears.
←
→
SPACE
Command
*POSI RET END RESET
................
Editing Cursor
Editing
To display the CAMERA ID on the monitor screen
Move the cursor to CAMERA ID in the SETUP menu and
select ON.
Area
3. Move the character cursor to a character you want by
pressing ITEM, Aor B.
4. After selecting the character, press the PAGE button.
The selected character appears in the editing area.
(The editing cursor in the editing area moves to the
right automatically at this moment.)
2. Field/Frame Charging Mode Setting
(FLD/FRM)
You can select the charging mode from FIELD or FRAME.
5. Repeat the steps above until all characters are edited.
To enter a blank space in the CAMERA ID
Move the character cursor to SPACE and press the
PAGE button.
** SET UP **
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
OFF
SHUTTER
GAIN
To edit a specific character in the CAMERA ID
1. Move the character cursor to ← or → then press the
PAGE button to move the editing cursor to the charac-
ter to be edited in the editing area.
AUTO
INT
ABC
SYNC
BLACK BAL
SCENE FILE
*SCENE1
2. Move the character cursor to the character area and
select a new character.
END
3. Press the PAGE button to set the CAMERA ID.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Move the cursor to the FLM/FRM parameter.
3. Move the cursor to the AREA parameter and select the
desired detection area. You can select the desired
detection area from followings.
2. Select FLM (field) or FRM (frame).
Note:
ALL: All areas on the monitor screen are detected.
MANU: Detection areas are selectable manually. See
below for details.
When FRM is selected, ELC is set to OFF automat-
ically.
CENTER: The photometric weight is given to the cen-
ter of the monitor screen.
S CIRCLE (Small Circle): The photometric weight is
given to the area within a small circle in the center
of the monitor screen.
M CIRCLE (Medium Circle): The photometric weight is
given to the area within a medium large circle in the
center of the monitor screen.
L CIRCLE (Large Circle): The photometric weight is
given to the area within a large circle in the center
of the monitor screen.
3. Electronic Light Control Setting (ELC)
The electronic light control function eliminates interfer-
ence by strong background lighting which makes the
camera picture dark, such as a spotlight. In the ELC
mode, more photometric weight is given to the desired
point of the screen (to where the important object is
located).
Each time you press A or B, the parameter changes
** SET UP **
as follows.
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*ON
ALL
MANU
CENTER
S CIRCLE (Small Circle)
L CIRCLE (Large Circle)
SHUTTER
GAIN
OFF
AUTO
INT
M CIRCLE (Medium Circle)
SYNC
BLACK BAL
SCENE FILE
ABC
*SCENE1
END
ALL
Detection Area
3-1. ELC detection control area setting (ELC CONT)
1. Select ON for the ELC ON/OFF selector on the front
panel of the camera control unit. Then confirm the ELC
parameter is ON.
ON
OFF
CENTER
Detection Area
ELC
50% Sensing
Area
100% Sensing
Area
2. Move the cursor to the ELC parameter and press the
PAGE button.
The ELC CONT menu appears.
S CIRCLE
(Small Circle)
** ELC CONT **
Detection Area
AREA
ALL
PEAK/AVE
P....I....A
RET END
14
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the PAGE button to mask that area. The mask
turns white. (When the cursor is moved on an area that
has already been masked, the mask and cursor start
blinking.)
M CIRCLE
(Medium Circle)
Detection Area
Masked Area
(WHITE)
L CIRCLE
(Large Circle)
Detection Area
Note: A masked area will be excluded from ELC
detection.
5. Repeat the steps 3 and 4 to complete masking.
To cancel masking, move the cursor to that area and
press the PAGE button.
Note: Detection areas are not displayed on the moni-
Masked Area
(WHITE)
tor.
3-1-1. Manual setting of the ELC detection control area
(MANU)
You can mask areas on the monitor screen to block the
strong brightness manually. Follow the steps below:
Notes:
The manual mask setting field is only displayed on
VIDEO1, 2 and S-VIDEO OUT.
It is not displayed on RGB/SYNC output.
1. Move the cursor to the AREA parameter on the ELC
CONT menu.
6. After masking is completed, press the PAGE button for
a second or more. The ELC CONT menu appears.
3-1-2. Peak and Average Weight Control (PEAK/AVE)
1. Move the cursor to the PEAK/AVE parameter. The “I”
cursor starts blinking.
2. Select MANU and press the PAGE button. The manual
mask setting field appears.
Cursor
(WHITE)
** ELC CONT **
AREA
ALL
PEAK/AVE
P....I....A
RET END
3. Select the area where backlight is bright by pressing
A, Bor the ITEM button.
2. Move the “I” cursor to set the detection value.
When the “I” cursor is moved to the P (peak) side, the
peak value is detected.
When the “I” cursor is moved to the A (average) side,
the average value is detected.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2. AGC detection control area setting (AGC CONT)
1. Set the ELC ON/OFF selector on the front panel of the
camera control unit to the OFF position. Then confirm
that the ELC parameter is OFF.
1. Move the cursor to the SHUTTER parameter.
2. Select the shutter speed or MANU for manual setting
from the following.
*MANU
1/500
OFF (1/60)
1/1000
1/100
1/250
1/2000
1/4000
1/10000
ON
OFF
3. When you have selected MANU, press the PAGE but-
ton. The SHUTTER menu appears and the MANU SET
parameter starts blinking.
ELC
** SET UP **
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
*MANU
AUTO
INT
2. Move the cursor to the ELC parameter and press the
PAGE button.
SHUTTER
GAIN
The AGC CONT menu appears.
SYNC
BLACK BAL
SCENE FILE
ABC
*SCENE1
** AGC CONT **
END
AREA
ALL
PEAK/AVE
P....I....A
Blinking
** SHUTTER **
MANU SET
100/525
RET END
3. Follow step 3 descrebed for “3-1. ELC detection con-
trol area setting (ELC CONT)” to select the desired
detection area (AREA).
RET END
4. Select the desired electronic shutter speed by press-
ing A or B. The adjustable range is 1/525-261/525
lines.
4. Follow steps 1 and 2 descrebed for “3-1-2. Peak and
Average Weight Control (PEAK/AVE)” to set the detec-
tion value.
5. Gain Control Setting (GAIN)
4. Electronic Shutter Speed Setting
(SHUTTER)
You can set the gain (brightness level portion of an
image) to automatic level adjustment (AUTO) or manu-
al level adjustment (MANU).
Note: When ON is selected for ELC on the SETUP
menu, this item is not available. To select the elec-
tronic shutter speed, select OFF for ELC on the
SETUP menu.
** SET UP **
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
You can select the electronic shutter speed of 1/100,
1/250, 1/500, 1/1 000, 1/2 000, 1/4 000 or 1/10 000 sec-
onds. The shutter speed can also be set manually.
*OFF
OFF
SHUTTER
GAIN
AUTO
INT
SYNC
BLACK BAL
SCENE FILE
ABC
*SCENE1
** SET UP **
END
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
OFF
SHUTTER
GAIN
1. Move the cursor to the GAIN parameter.
AUTO
INT
2. Select AUTO or MANU. The gain of the video amplifier
is changed according to the position of the automat-
ic/manual gain selector (HIGH/LOW/OFF) on the front
panel of the camera control unit.
SYNC
BLACK BAL
SCENE FILE
ABC
*SCENE1
END
16
Download from Www.Somanuals.com. All Manuals Search And Download.
If you select AUTO, the gain of the amplifier changes as
follows.
• The VS gen-lock mode has its own menu for horizontal
and subcarrier phase adjustaments. When the cable
length of the video output or the gen-lock input is
changed, the horizontal phase must be re-adjusted.
• When the HD/VD or VD pulse is to be used, supply
them to the VBS/HD connector and the VD connector
on the rear panel of the camera control unit.
Position
HIGH
LOW
Gain
Maximum +18 dB
Maximum +9 dB
0 dB
OFF
6-1. Internal Sync Mode (INT)
When you select MANU, the gain of the amplifier changes
as follows.
RGB Sync Output Level Adjustment (RGB SYNC)
1. Move the cursor to the SYNC parameter.
2. Press the PAGE button. The SYNC menu appears on
the monitor screen.
Position
HIGH
LOW
Gain
+18 dB (Fixed)
+9 dB (Fixed)
0 dB
OFF
** SYNC **
RGB SYNC
0.3V
6. Synchronization Setting (SYNC)
This model accepts the VBS signal (color composite
video or blackburst signal) and VS signal (B/W com-
posite video or composite sync signal ) for gen-lock
operation.
RET END
It also accepts the combined vertical (VD) and hori-
zontal (HD) drive pulse, and the vertical drive pulse
(VD) only.
3. Move the cursor to the RGB SYNC parameter.
4. Select 4.0V or 0.3V according to the RGB monitor input
level.
6-2. VBS Gen-lock Mode (EXT(VBS))
1. Move the cursor to the SYNC parameter.
2. Connect the coaxial cable for the blackburst or com-
posite color video signal to the gen-lock input connec-
tor.
** SET UP **
CAMERA ID
FLD/FRM
ELC
SHUTTER
GAIN
*OFF
FLD
*OFF
OFF
AUTO
*INT
ABC
3. Confirm that the INT parameter changed to EXT(VBS)
on the menu.
SYNC
BLACK BAL
SCENE FILE
Caution: The gen-lock input signal should meet the
EIA RS-170A specifications and should not contain
jitter, such as a VCR playback signal, as it could
disturb synchronization.
*SCENE1
END
Imporant Notices:
** SET UP **
• The sync mode priority is as follows:
1. Color composite video signal (VBS)
2. B/W composite video signal (VS)
CAMERA ID
FLD/FRM
ELC
SHUTTER
GAIN
*OFF
FLD
*OFF
3. HD/VD signal
4. VD signal
5. Internal sync (INT)
OFF
AUTO
SYNC
*EXT(VBS)
ABC
*SCENE1
BLACK BAL
SCENE FILE
• When the internal sync (INT) mode is to be used, no
gen-lock input signal should be supplied to the gen-
lock input connector on the rear panel of the camera
contrrol unit.
END
• When the VBS or VS gen-lock mode is to be used,
supply the gen-lock input signal to the gen-lock input
connector on the rear panel of the camera control unit.
• The VBS gen-lock mode has its own menu for horizon-
tal and subcarrier phase adjustments. When the cable
length of the video output or the gen-lock input is
changed, horizontal and subcarrier phase must be re-
adjustable.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. After confirming that the cursor is on EXT(VBS), press
the PAGE button. The SYNC menu appears on the
monitor screen.
Notes:
• When the "I" cursor reaches the "+" end, it jumps back
to "–" . At the same time, SC COARSE is incremented
by one step to enable a continuous adjustment. The
reverse takes place when the "I" cursor reaches the "–"
end.
** SYNC **
RGB SYNC
H PHASE
0.3V
For more accurate adjustment, supply both the original
camera video output signal and the effect output video
signal (program output video signal) of the special
effects generator (SEG) to a vectorscope and compare
the chroma phase of both signals.
-....I....+
1(1--4)
SC COARSE
SC FINE
-I........+
• To reset SC FINE to the values preset at the factory,
press A and B simultaneously. The SC FINE is reset
at the factory setting.
RET END
5. Move the cursor to the RGB SYNC parameter.
6. Select 4.0V or 0.3V according to the RGB monitor input
level.
6-3. VS Gen-lock Mode (EXT(VS))
1. Move the cursor to the SYNC parameter.
2. Connect the coaxial cable for the composite sync or
composite B/W video signal to the gen-lock input con-
nector.
3. Confirm that the INT parameter changed to EXT(VS) on
the menu.
Horizontal Phase Adjustment (H PHASE)
1. Move the cursor to H PHASE. The cursor starts blink-
ing.
2. Supply the video output signal of the camera to be
adjusted and the reference gen-lock input signal to a
dual-trace oscilloscope.
3. Set the oscilloscope to the horizontal sync portion on
the oscilloscope.
Caution: The gen-lock input signal should meet the
EIA RS-170 specifications and should not contain
jitter, such as a VCR playback signal, as it could
disturb synchronization.
4. Adjust the horizontal phase by pressing A or B. The
adjustable range is 0-1.5 µs.
** SET UP **
Note: To reset H PHASE to the values preset at the
factory, press A and B simultaneously. The H
PHASE is reset at the factory setting.
CAMERA ID
FLD/FRM
ELC
SHUTTER
GAIN
*OFF
FLD
*OFF
OFF
AUTO
Subcarrier Coarse Phase Adjustment (SC COARSE)
1. Move the cursor to SC COARSE parameter on the
SYNC menu. The cursor starts blinking.
SYNC
*EXT(VS)
ABC
*SCENE1
BLACK BAL
SCENE FILE
2. Press A or B to match the color (hue) of the camera's
video signal, when observed at the output of the
Special Effect Generator (SEG) or Switcher, as closely
as possible the color of the original scene. (The SC
COARSE adjustment can be incremented in steps of
90 degrees (4 steps) by pressing Aor B.)
Note:
END
4. After confirming that the cursor is on EXT (VS), press
the PAGE button. The phase adjustment menu
appears on the monitor screen.
After the fourth step, the adjustment returns to the
first step.
** SYNC **
RGB SYNC
H PHASE
0.3V
1 (1 - - 4): 0 degrees
2 (1 - - 4): 90 degrees
3 (1 - - 4): 180 degrees
4 (1 - - 4): 270 degrees
-....I....+
RET END
5. Move the cursor to the RGB SYNC parameter.
6. Select 4.0V or 0.3V according to the RGB monitor input
Subcarrier Fine Phase Adjustment (SC FINE)
1. Move the cursor to SC FINE on the SYNC menu. The
cursor starts blinking.
2. Press A or B to match the color (hue) of the came-
ra's video signal, when observed at the output of the
Special Effect Generator (SEG) or Switcher, as closely
as possible the color of the original scene.
The SC FINE adjustment has a range of 90 degrees of
color shift.
level.
7. Move the cursor to H PHASE. The cursor starts blink-
ing.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Supply the video output signal of the camera to be
adjusted and the reference gen-lock input signal to a
dual-trace oscilloscope.
9. Set the oscilloscope to the horizontal rate and expand
the horizontal sync portion on the oscilloscope.
10. Adjust the horizontal phase by pressing A or B. The
adjustable range is 0-1.5 µs.
7. Black Balance Setting (BLACK BAL)
Under low light conditions, correct setting of the black
balance is required for producing correct colours.
Once the black balance has been set correctly, the
setting is maintained in memory.
This setting will not be lost even if the camera control
unit is turned off. However, for best results, it is recom-
mended that the black balance adjustment be carried
out when the camera has not been used for a long
period of time.
6-4. External HD/VD Mode (HD/VD)
1. Move the cursor to the SYNC parameter.
2. Connect the coaxial cable for the external HD and VD
signal to the gen-lock input connector and the VD
input connector respectively.
3. Confirm that the INT parameter changed to EXT (H/V)
on the menu.
There are two black balance control mode. Auto black
balance control (ABC) can be selected on the front
panel and manual control (MANU) on this menu.
7-1. Auto Black Balance Setting (BLACK BAL)
1. Move the cursor to the BLACK BAL parameter and
select ABC.
4. Move the cursor to the RGB SYNC parameter.
5. Select 4.0V or 0.3V according to the RGB monitor input
level.
** SET UP **
** SET UP **
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
SHUTTER
GAIN
OFF
*OFF
OFF
AUTO
SHUTTER
GAIN
SYNC
BLACK BAL
SCENE FILE
*EXT(H/V)
ABC
AUTO
INT
ABC
SYNC
*SCENE1
BLACK BAL
SCENE FILE
*SCENE1
END
END
6-5. External VD Mode (VD)
1. Move the cursor to the SYNC parameter and select
INT.
2. Connect the coaxial cable for the external VD signal to
the VD input connector.
3. Confirm that the INT parameter changed to EXT (VD)
on the menu.
4. Move the cursor to the RGB SYNC parameter.
5. Select 4.0V or 0.3V according to the RGB monitor input
level.
2. Attach the lens cap on the camera lens.
3. Move the cursor to END and press the PAGE button to
close the SETUP menu.
4. Press the A (ABC) button on the front panel of the
camera control unit.
The auto black balance setting is performed.
5. When the auto black balance is completed, the auto
warning indicator first blinks and then goes off. If the
indicator remains lit, repeat the above procedure for
setting the auto black balance (ABC).
7-2. Manual Black Balance Control Setting(MANU)
1. Move the cursor to the BLACK BAL parameter and
select MANU.
** SET UP **
CAMERA ID
FLD/FRM
ELC
SHUTTER
GAIN
*OFF
FLD
*OFF
OFF
AUTO
** SET UP **
SYNC
*EXT(VD)
ABC
*SCENE1
BLACK BAL
SCENE FILE
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
OFF
END
SHUTTER
GAIN
AUTO
INT
*MANU
*SCENE1
SYNC
BLACK BAL
SCENE FILE
END
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the PAGE button. The BLACK BAL menu (manu-
al black balance setting menu) appears.
2. Press the PAGE button. The SCENE FILE menu
appears.
** BLACK BAL **
** SCENE FILE 1 ** P1
R-PED
B-PED
-....I....+
-....I....+
GAMMA
-....I....+
ON
AUTO KNEE
TOTAL-PED
-....I....+
CHROMA GAIN -....I....+
DTL BAND
HDTL GAIN
VDTL GAIN
RED DTL
- .I.....+
-....I....+
-....I....+
OFF
RET END
NEXT RET END
3. Move the cursor to R-PED. The cursor starts blinking.
4. Attach the lens cap on the camera lens.
5. While observing the vector scope or waveform monitor,
adjust the red pedestal level (R-PED) for minimum car-
rier by pressing Aor B.
6. Move the cursor to B-PED. The cursor starts blinking.
7. While observing the vector scope or waveform monitor,
adjust the blue pedestal level (B-PED) for minimum
carrier by pressing Aor B.
** SCENE FILE 1 ** P2
CLEAN DNR
2D LPF
OFF
OFF
MATRIX R-G -....I....+
MATRIX R-B -....I....+
MATRIX G-R -....I....+
MATRIX G-B -....I....+
MATRIX B-R -....I....+
MATRIX B-G -....I....+
HUE
-....I....+
NEXT RET END
Note: To reset the pedestal level to the factory setting,
move the cursor to R-PED or B-PED and press the
A and B button simultaneously for a second or
more. The R-PED or B-PED level value reset to the
factory setting.
There are 2 pages for SCENE FILE (P1 and P2).
On page 1 (P1), you can set the following items:
• Gamma Correction (GAMMA)
• Auto Knee ON/OFF (AUTO KNEE)
• Total Pedestal Level Control (TOTAL-PED)
• Chrominance Level Control (CHROMA GAIN)
• Detail Band Control (DTL BAND)
8. Scene File Setting (SCENE FILE)
This menu allows for you to adjust and set 16 items for
the video signal of the camera to meet your
requirments.
• Horizontal Detail Gain Control (HDTL GAIN)
• Vertical Detail Gain Control (VDTL GAIN)
You can store two sets of values in two different scene
files.
Use the Scene File Selector on the front panel of the
camera control unit to select SCENE FILE 1 or SCENE
FILE 2.
On page 2 (P2), you can set the following items:
• Red Detail ON/OFF (RED DTL)
• Clear Digital Noise Reduction Control (CLEAN DNR)
• 2 Dimention Low Pass Filter (2D LPF)
• 6 Chroma Matrix Controls
(MATRIX R-G)
1. Move the cursor to the SCENE FILE parameter and
select SCENE 1.
(MATRIX R-B)
(MATRIX G-R)
(MATRIX G-B)
(MATRIX B-R)
(MATRIX B-G)
• Chroma Phase Control (HUE)
** SET UP **
CAMERA ID
FLD/FRM
ELC
*OFF
FLD
*OFF
OFF
To turn the page
Move the cursor to NEXT and press the PAGE button.
SHUTTER
GAIN
AUTO
INT
ABC
SYNC
BLACK BAL
SCENE FILE
*SCENE1
Returning to the SETUP menu
Move the cursor to RET and press the PAGE button.
END
20
Download from Www.Somanuals.com. All Manuals Search And Download.
8-1. Gamma Correction (GAMMA)
1. Move the cursor to the GAMMA parameter. The “I” cur-
sor starts blinking.
8-7. Vertical Detail Gain Control (VDTL GAIN)
1. Move the cursor to the VDTL GAIN parameter. The “I”
cursor starts blinking.
2. While observing the waveform monitor or the color
video monitor, adjust the gamma level.
When the “I” cursor is at the end of the “+” side,
gamma correction is set to OFF.
2. While observing the color video monitor, adjust the
aperture level.
Move the “I” cursor to the “+” side to make the image
sharper.
When the “I” cursor is at the end of the “−” side, black
strech (BLACK STRET) is set.
Move the “I” cursor to the “−” side to make the image
softer.
When the “I” cursor is at the end of the “−” side, the
vertical detail level is set to OFF.
8-2. Auto Knee ON/OFF (AUTO KNEE)
1. Move the cursor to the AUTO KNEE parameter.
2. Select ON or OFF for the auto knee mode.
8-8. Red Detail ON/OFF (RED DTL)
1. Move the cursor to the RED DTL parameter.
2. Select ON or OFF for the RED DTL mode.
When ON is selected, the red detail is enhanced.
8-3. Total Pedestal Level Control (TOTAL-PED)
1. Move the cursor to the TOTAL-PED parameter. The “I”
cursor starts blinking.
2. While observing the waveform monitor or the color
video monitor, adjust the total pedestal level (black
level).
8-9. Clear Digital Noise Reduction Control
(CLEAN DNR)
1. Move the cursor to the CLEAN DNR parameter.
2. Select OFF, LOW or HI for the CLEAN DNR mode.
Move the “I” cursor to the “+” side to make the image
brighter.
Move the “I” cursor to the “−” side to make the image
darker.
8-10. 2 Dimention Low Pass Filter (2D LPF)
1. Move the cursor to the 2D LPF parameter.
2. Select ON or OFF for the 2D LPF mode.
8-4. Chrominance Level Control (CHROMA GAIN)
1. Move the cursor to the CHROMA GAIN parameter. The
“I” cursor starts blinking.
8-11. 6 Chroma Matrix Controls
(MATRIX R-G)
2. While observing the waveform monitor or the color
video monitor, adjust the chroma level.
(MATRIX R-B)
(MATRIX G-R)
(MATRIX G-B)
8-5. Detail Band Control (DTL BAND)
(MATRIX B-R)
1. Move the cursor to the DTL BAND parameter. The “I”
(MATRIX B-G)
cursor starts blinking.
2. While observing the color video monitor, adjust the
1. Move the cursor to the desired matrix item. The “I” cur-
sor starts blinking.
aperture level.
Move the “I” cursor to the “+” side to raise the frequen-
2. While observing the vectorscope or the color video
monitor, adjust the matrix level.
cy.
Move the “I” cursor to the “−” side to lower the frequen-
cy.
8-12. Chroma Phase Control (HUE)
1. Move the cursor to the HUE parameter. The “I” cursor
starts blinking.
8-6. Horizontal Detail Gain Control (HDTL GAIN)
1. Move the cursor to the HDTL GAIN parameter. The “I”
cursor starts blinking.
2. While observing the vectorscope or the color video
monitor, adjust the chroma phase (hue).
2. While observing the color video monitor, adjust the
aperture level.
To reset to the factory setting
Any of the above settings except AUTO KNEE, RED DTL,
CLEAN DNR and 2D LPF, can be reset to the factory set-
tings.
Move the “I” cursor to the “+” side to make the image
sharper.
Move the “I” cursor to the “−” side to make the image
softer.
Move the cursor to the desired item and press A and B
simultaneously for a second and more.
When the “I” cursor is at the end of the “−” side, the
horizontal detail level is set to OFF.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PREVENTION OF BLOOMING AND SMEAR
Smear
When the camera is aimed towards spotlights or other
bright lights or light reflecting objects, smear or blooming
may appear.
Bright object
Therefore the camera should be operated carefully in the
vicinity of extremely bright objects to avoid smear or
blooming.
Ring type flare
If the camera is aimed at the sun or very bright light, such
as laser beam, for a long period of time, the CCD image
sensor may be burned in and blemishes (white or black
dots) appears on the monitor screen
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Pick-up System:
Image Sensor:
Micro prism system
Three 1/2" interline transfer (IT) super high sensitivity CCDs (GP-US522)
Three 1/3" interline transfer (IT) super high sensitivity CCDs (GP-US532)
768 (Horizontal) x 494 (Vertical)
Pixels:
Scanning Standard:
Synchronizing System:
Internal:
525 lines, 60 fields, 30 frames
Internal or External (Gen-Lock), automatically switchable
EIA standard
External (Gen-Lock) Input: VBS/VS/HD/VD is selectable
SC Phase for Gen-Lock (VBS): Free adjustable over 360°
H Phase for Gen-Lock (VS): Adjustable
Video Outputs:
Video Output: BNC Connector x 2
1.0V[p-p] NTSC composite/75 Ω
Y/C (S-VIDEO) Output: S-VIDEO Connector x 1
0.714V[p-p] Luminance level (Y)/75 Ω (S-VIDEO connector)
0.286V[p-p] Burst Level (C)/75 Ω (S-VIDEO connector)
RGB/SYNC Output: D-SUB 9-pin Connector x 1
R/G/B:
SYNC:
VIDEO:
0.7V[p-p] each/75 Ω
4V[p-p]/75 Ω or 0.3V[p-p]/75 Ω selectable
NTSC composite/75 Ω
Required Illumination:
Minimum Illumination:
2000 lx at F11.0, 3200 K (GP-US522)
2000 lx at F8.0, 3200 K (GP-US532)
5 lx (0.5 foot candle) at F2.8 with +18 dB gain, 30 IRE level (GP-US522)
9 lx (0.9 foot candle) at F2.2 with +18 dB gain, 30 IRE level (GP-US532)
62 dB (Typical, Luminance) without aperture and gamma
800 lines at center (Y signal) (GP-US522)
Signal-to-Noise Ratio:
Horizontal Resolution:
750 lines at center (Y signal) (GP-US532)
White Balance:
ATW (Automatic Tracing White Balance Control), AWC (Automatic White
Balance Control) and Manual
Black Balance:
Color Bar:
ABC (Automatic Black Balance) and Manual
SMPTE color bar with 7.5% set-up
Electronic Shutter:
AUTO:
STEP:
Adjustable between 1/60 - 1/10 000s
Selectable 1/60(OFF),1/100, 1/250, 1/500, 1/1 000, 1/2 000,
1/4 000 and 1/10 000s
SYNCHRO SCAN: Selectable from 1/525 to 254/525 line
Gain Selection:
Switches:
AGC and Gain Up (Selectable)
Power On/Off (POWER), Camera/Color Bar Selection (CAM/BAR),
Gain Up Selection (OFF/LOW/HIGH (0/+9/+18 dB)), White Balance Selection
(ATW/AWC/MANU), ELC (Electronic Light Control) On/Off, PAGE, ITEM (AWC),
A(ABC) and B
Controls:
Computer Interface
Lens Mount:
R Gain, B Gain and ELC LEVEL
RS-232C : D-SUB 9-pin Connector x 1
Special C Mount (GP-US522)
C Mount (GP-US532)
12 V DC
Power Source:
Power Consumption:
Ambient Operating Temperature:
Ambient Operating Humidity:
Dimensions
8.4 W
32°F - 113°F (0°C - +45°C)
30 % - 90 %
Camera Head:
34 (W) x 44 (H) x 52 (D) mm
(Excluding Mounting Adaptor)
CCU:
[1-5/16" (W) x 1-11/16" (H) x 2" (D)]
206.5 (W) x 44 (H) x 250 (D) mm
(Excluding Rubber Foot and Connector) [8-1/8" (W) x 1-11/16" (H) x 9-1/2" (D)]
Weights
Camera Head:
CCU:
110 g (0.24 lbs)
1.7 kg (3.74 lbs)
Dimensions and Weights indicated are approximate
Specifications are subject to change without notice
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL ACCESSORIES
Camera Cable .............................................................. GP-CA522/4
Character Generators ...................................... WJ-KB30, WJ-KB50
Panasonic Canada Inc.
Panasonic Security & Digital Imaging Company
A Division of Matsushita Electric Corporation of America
5770 Ambler Drive, Mississauga,
Ontario, L4W 2T3 Canada (905)624-5010
Industrial / Medical Group
Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
TEL: (201) 392-6674 / FAX: (201) 348-5346
Regional Office
Ave. 65 de Infanteria. Km. 9.5
Northeast: 43 Hartz Way, Secaucus, NJ 07094 (201) 348-7303
Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30124 (770) 338-6838
Midwest: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200
Southwest: 8105 Beitsline Road, Suite 100, Irving, TX 75063 (214) 915-1333
Western: 6550 Katella Ave., Cypress, CA 90630 (714) 373-7265
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985 (809)750-4300
N0200-0
YWV8QA5441AN
Printed in Japan
N 19
2000 © Matsushita Communication Industrial Co.,Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|